Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2
|
|
|
- Rudolph Bryan
- 5 years ago
- Views:
Transcription
1 Series EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, and pneumatic functions. Thanks to a suitable bracket, the piloting solenoid valve can be assembled perpendicular respect the body valve. The kind of construction is based on a balanced spool with static seal, being the seals supported by distance rings integral to the body. This series of valves, in the sizes G 1/8 and G 1/4, is prearranged for both manifold mounting (conveyed inlet and exhausts), or supply rail mounting (conveyed inlet), by means of rear notch screws. The versions size G 1/4-5 port are available even with Namur port pattern. TECHNICAL DATA Operating pressure Monostable:,5 10 bar Bistable: 10 bar Working temperature C (-0 C with dry air) Medium Filtered, unlubricated or continuous lubricated compressed air Life 10 million operations (in optimal use conditions) Port size G 1/8 - G 1/4 - G 1/ piloting G 1/8 port size Nominal diameter G 1/8 = 5 mm; G 1/4 = 7 mm; G 1/ = 1 mm Piloting solenoid valve C/USCSVP - see chapter Direct acting solenoid valves on page.9 Coil USB - see chapter Coils on page.1 USBG - see chapter Coils on page.1* Electric connector USR 10/N9 - see chapter Connectors on page.13 ULR1B - see chapter Connectors on page.13* *Only for single valve (coil and connector overcome the overall dimensions of the valves). FLOW CHART - EK G 1/8 - MATERIALS Bottoms Body Distance rings Springs Seals Spools Piston SPARE PARTS Anodized aluminium alloy Anodized aluminium alloy G 1/8 - G 1/4 Acetal resin G 1/ Brass Galvanized steel NBR rubber Anodized aluminium alloy Anodized aluminium alloy SEALS KIT 3 port G 1/8 EK/SG/8 3 port G 1/4 EK/SG/4 5 port G 1/8 EKCA/SG/8 5 port G 1/4 EKCA/SG/4 5 port G 1/ EKCA/SG/ PILOTING CHART - EK G 1/8 (Nl/min) Piloting pressure (bar) Double pneumatic control Operating pressure (bar) FLOW CHART - EK G 1/4 - Operating pressure (bar) PILOTING CHART - EK G 1/4 (Nl/min) Piloting pressure (bar) Double pneumatic control Operating pressure (bar) Operating pressure (bar) Page.40
2 G 1/8-3 PORT Series EK FLOW CHART - EK G 1/ - PILOTING CHART - EK G 1/ Double pneumatic control (Nl/min) Piloting pressure (bar) Operating pressure (bar) Operating pressure (bar) PILOT ACTUATED VALVES G 1/8-3 PORT TYPE 3/ N.A EKA8 KR/ZR EKA8 KR/TQ 3/ N.C EKC8 KR/ZR EKC8 KR/TQ 3/ EK8 KR/KR differential EK8 KR/TR 3 PORT 3 HOLES Ø5, Page.41
3 Series EK G 1/8-5 PORT PILOT ACTUATED VALVES G 1/8-5 PORT TYPE EKCA8 KR/ZR EKCA8 KR/TQ EKCA8 KR/KR differential EKCA8 KR/TR closed centre EKCA8 SR/SR open centre EKCA8 AR/AR pressure centre EKCA8 PR/PR 5 PORT 4 HOLES Ø5, Page.4
4 G 1/8-3 PORT Series EK SOLENOID ACTUATED VALVES G 1/8-3 PORT EKA8 KUC/ZR 3/ N.O EKA8 KUC/TQ EKA8 KUR/ZR EKC8 KUC/ZR 3/ N.C EKC8 KUC/TQ EKC8 KUR/ZR EK8 KUC/KUC 3/ EK8 KUR/KUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: EKC8 KUC/TQ BECOMES EKC8 KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS 3 PORT MONOSTABLE 3 PORT BISTABLE 3 HOLES Ø5, 3 HOLES Ø5, Page.43
5 Series EK G 1/8-5 PORT SOLENOID ACTUATED VALVES G 1/8-5 PORT EKCA8 KUC/ZR EKCA8 KUC/TQ EKCA8 KUR/ZR EKCA8 KUC/KUC EKCA8 KUR/KUR closed centre EKCA8 SUC/SUC EKCA8 SUR/SUR open centre EKCA8 AUC/AUC EKCA8 AUR/AUR pressure centre EKCA8 PUC/PUC EKCA8 PUR/PUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: EKCA8 KUC/TQ BECOMES EKCA8 KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS 5 PORT MONOSTABLE 5 PORT AND 3 POSITION BISTABLE 4 HOLES Ø5, 4 HOLES Ø5, Page.44
6 ACCESSORIES G 1/8-3 AND 5 PORT Series EK BASE FOR MANIFOLD MOUNTING OF VALVES G 1/8 - KB/EK8 4 HOLES Ø4, No. of stations L KB/EK8/ KB/EK8/3 KB/EK8/4 KB/EK8/5 KB/EK8/6 KB/EK8/8 KB/EK8/10 KB/EK8/1 KB/EK8/14 KB/EK8/16 KB/EK8/18 KB/EK8/0 * BASES ARE SUPPLIED COMPLETE WITH NOTCH SCREWS AND SEALS SUPPLY RAIL MOUNTING OF VALVES G 1/8 - CEK8 BLANKING PLATE - PC/EK8 WEIGHT 40 g No. of stations 3 5 LA LB CEK8/ CEK8/3 CEK8/5 * SUPPLY RAILS ARE SUPPLIED COMPLETE WITH NOTCH SCREWS, SEALS AND FIXING BRACKETS Page.45
7 Series EK G 1/4-3 PORT PILOT ACTUATED VALVES G 1/4-3 PORT 3/ N.O. TYPE EKA4 KR/ZR EKA4 KR/TQ 3/ N.C EKC4 KR/ZR EKC4 KR/TQ EK4 KR/KR 3/ differential EK4 KR/TR 3 PORT 3 HOLES Ø5, Page.46
8 G 1/4-5 PORT Series EK PILOT ACTUATED VALVES G 1/4-5 PORT TYPE EKCA4 KR/ZR EKCA4 KR/TQ EKCA4 KR/KR differential EKCA4 KR/TR closed centre EKCA4 SR/SR open centre EKCA4 AR/AR pressure centre EKCA4 PR/PR 5 PORT 4 HOLES Ø5, Page.47
9 Series EK G 1/4-5 VIE PILOT ACTUATED VALVES NAMUR PORT PATTERN - G 1/4-5 PORT TYPE ENCA4 KR/ZR ENCA4 KR/TQ ENCA4 KR/KR differential ENCA4 KR/TR closed centre ENCA4 SR/SR open centre ENCA4 AR/AR pressure centre ENCA4 PR/PR NAMUR PORT PATTERN - 5 PORT Ø5,5 DEPTH 5 THROUGH HOLES Ø5,5 Page.48
10 G 1/4-3 PORT Series EK SOLENOID ACTUATED VALVES G 1/4-3 PORT EKA4 KUC/ZR 3/ N.O EKA4 KUC/TQ EKA4 KUR/ZR EKC4 KUC/ZR 3/ N.C EKC4 KUC/TQ EKC4 KUR/ZR EK4 KUC/KUC 3/ EK4 KUR/KUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: EKC4 KUC/TQ BECOMES EKC4 KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS 3 PORT MONOSTABLE 3 PORT BISTABLE 4 HOLES Ø5, 3 HOLES Ø5, Page.49
11 Series EK G 1/4-5 PORT SOLENOID ACTUATED VALVES G 1/4-5 PORT EKCA4 KUC/ZR EKCA4 KUC/TQ EKCA4 KUR/ZR EKCA4 KUC/KUC EKCA4 KUR/KUR closed centre EKCA4 SUC/SUC EKCA4 SUR/SUR open centre EKCA4 AUC/AUC EKCA4 AUR/AUR pressure centre EKCA4 PUC/PUC EKCA4 PUR/PUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: EKCA4 KUC/TQ BECOMES EKCA4 KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS 5 PORT MONOSTABLE 5 PORT AND 3 POSITION BISTABLE 4 HOLES Ø5, 4 HOLES Ø5, Page.50
12 G 1/4-5 PORT Series EK SOLENOID ACTUATED VALVES NAMUR PORT PATTERN - G 1/4-5 PORT ENCA4 KUC/ZR ENCA4 KUC/TQ ENCA4 KUR/ZR ENCA4 KUC/KUC ENCA4 KUR/KUR closed centre ENCA4 SUC/SUC ENCA4 SUR/SUR open centre ENCA4 AUC/AUC ENCA4 AUR/AUR pressure centre ENCA4 PUC/PUC ENCA4 PUR/PUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: ENCA4 KUC/TQ BECOMES ENCA4 KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS NAMUR PORT PATTERN - 5 PORT MONOSTABLE NAMUR PORT PATTERN - 5 PORT AND 3 POSITION BISTABLE Ø5,5 DEPTH 5 THROUGH HOLES Ø5,5 Ø5,5 DEPTH 5 THROUGH HOLES Ø5,5 Page.51
13 Series EK ACCESSORIES G 1/4-3 AND 5 PORT BASE FOR MANIFOLD MOUNTING OF VALVES G 1/8 - KB/EK8 4 HOLES Ø5,5 No. of stations L KB/EK4/ KB/EK4/3 KB/EK4/4 KB/EK4/5 KB/EK4/6 KB/EK4/8 KB/EK4/10 KB/EK4/1 KB/EK4/14 KB/EK4/16 KB/EK4/18 KB/EK4/0 * BASES ARE SUPPLIED COMPLETE WITH NOTCH SCREWS AND SEALS SUPPLY RAIL MOUNTING OF VALVES G 1/4 - CEK4 BLANKING PLATE - PC/EK4 WEIGHT 65 g No. of stations LA LB CEK4/ CEK4/3 CEK4/5 * SUPPLY RAILS ARE SUPPLIED COMPLETE WITH NOTCH SCREWS, SEALS AND FIXING BRACKETS Page.5
14 G 1/ - 5 PORT Series EK PILOT ACTUATED VALVES G 1/ - 5 PORT TYPE EKCA KR/ZR EKCA KR/TQ EKCA KR/KR closed centre EKCA SR/SR 5 PORT MONOSTABLE 5 PORT BISTABLE 4 HOLES Ø6,5 4 HOLES Ø6,5 Page.53
15 Series EK G 1/ - 5 PORT SOLENOID ACTUATED VALVES G 1/ - 5 PORT EKCA KUC/ZR EKCA KUC/TQ EKCA KUR/ZR EKCA KUC/KUC EKCA KUR/KUR closed centre EKCA SUC/SUC EKCA SUR/SUR P.S.: SUBSTITUTE THE LETTER U WITH THE LETTER L IN EACH SOLENOID CONTROL TYPE TO ORDER THE SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 RESPECT THE BODY OF THE VALVE. E.G.: EKCA KUC/TQ BECOMES EKCA KLC/TQ (SEE ON PAGE.55 FOR THE MISSING DIMENSIONS) *THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE COILS 5 PORT MONOSTABLE 5 PORT BISTABLE 4 HOLES Ø6,5 4 HOLES Ø6,5 Page.54
16 90 SOLENOID ACTUATED VALVES Series EK SOLENOID ACTUATED VALVES WITH SOLENOID AT 90 G 1/8 G 1/4 G 1/ ACCESSORIES MOUNTING BRACKET FOR PILOT AND SOLENOID ACTUATED VALVES TYPES EK 4 EK 8 ON CYLINDER SERIES CPUI Ø CYLINDER L 3 50, ,5 SQ3-40/EK ,5 SQ50-63/EK 80 95, SQ80-100/EK * BRACKETS ARE SUPPLIED COMPLETE WITH DOWELS AND SCREWS. P.S.: PLEASE CHECK BEFORE ORDERING THE COUPLED DIMENSIONS OF THE CYLINDER WITH THE VALVE. Page.55
MEV. Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA standards size 02. ; i \\\.; I. Spool compact valves series MEV
MEV Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA 24563 standards size 02 Valves series "MEV" have been designed to satisfy trie need of ntegration between pneumatics and electronics.
seriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes
series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/2 - G 1 Valves series "UK" are produced in trie 2/2, 3/2 and functions. In trie 3 port control versión with small pilot system, sizes G 1/8 and G 1/4,
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2 Valves series "EK" are produced in the, and pneumatic functions; the kind of construction is based on a balancee! spool. In the mechanically
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Air treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
Pneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
SOLENOID VALVES PIV.M 15 mm
SOLENOID VALVES PIV.M mm / NC/NO direct control microvalves Possible assembly on single and multiple bases Monostable manual actuation as standard Assembly in any position Operation with filtered lubricated
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Poppet valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
Poppet valves manually and mechanically actuated - - DESCRIPTION Valves series "CA" are produced in the /2, /, and 5/ pneumatic functions. The poppet kind of construction and the very rugged control allow
MACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
MATERIALS PISTON TYPE. Non-magnetic
Cylinders to AFNOR NF E49-00 seriescx DESCRIPTION Cylinders series CX comply with AFNOR NF E49-00 (ex CNOMO) standard and so they result interchangeable. Cylinders series CX with magnetic piston type can
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
PSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
Solenoid valves "OPTYMA32-S" General. Series 2200
1 General Series 2200 1 Series 2200 Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP 12 = 24 VDC NPN Weight gr. 67 SHORT FUNCTION CODE "A" Serie Solenoid 2200-S-GB valves - Spring "OPTYMA32-S"
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
Vannes à commande pneumatique pneumatically piloted valves
Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS
Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS SOLENOID VALVES 5 port - 1/8" port size 4V100 SERIES - 06 ( port sizes 1/8" ) - technical features - MODEL 4V110-06 4V10-06 4V130C-06 4V130E-06
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
Solenoid valve. Solenoid Coil
Solenoid valve Solenoid valve Solenoid Coil Plunger Valve body A simple solenoid valve consists ofi: Valve body with a plunger the plunger is made of metal Coil an electrical coil if the coil is given
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
VENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
CABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
Screwed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227 Features and Benefits Thirteen Sizes Rack and Pinion Design Double Acting and Spring Return Break and Seat Combinations Multiple spring
Valve Islands Series H
CATALOGUE > Release 8. Valve Islands Series H Valve Island with Pneumatics and Electronics integrated. Available versions: Multipole (PNP and NPN) and Fieldbus (Profibus-DP, DeviceNet, CANopen). Valve
High Flow Valve Actuation Range. NAMUR Valves G1/4" & G1/2" Piped Valves G1/4" & G1/2" Banjo Valves G1/8" & G1/4"
31-37 High flow NAMUR valves G1/ and G1/ aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding High Flow Valve Actuation
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, / 0 0 /-/ Série FEATURES The monostable spool valves have TÜV certified IEC 608 Functional
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Solenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
MULTIFUNCTION SPOOL VALVES air operated and solenoid air operated G3/4-G1 - ISO 5599/1 subbase-mounted body
MULTIFUNCTION SPOOL VALVES air operated and air operated G/-G - ISO 99/ subbase-mounted body /-/ Series Type ISO size MULTIFUNCTION Multifunction selector The multifunction selector is equipped with pilot
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
Individual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
HERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
INTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
COMPACT VALVE - 1/4 Series DS2
COMPACT VALVE - G1/4 Features Suitable for manifold mounting Mounting provision for individual unit Compact size Manual override Wide range of manifolds available Wide range of coil voltages Important
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA