seriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
|
|
|
- Brendan Turner
- 6 years ago
- Views:
Transcription
1 seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV with fixed position). All the other electric versions can support the 3 mm direct acting valve, type ULCSV/R (with fixed position), type C/USCSVG with sleeve Ø 9 mm (with fixed position and rotatable coils series USB and USBG) or the amplifier valve XVF4 for a sensible piloting (see page 3.36). The pilot actuated valves can also be used to switch vacuum thanks to a suitably reinforced. The poppet design assures high flow and high life. This series of valves, in the sizes G 1/8, G 1/4 and G 1/, is prearranged for base mounting with conveyed inlet by means of rear notch screws. TECHNICAL DATA Operating pressure Solenoid actuated: 1,5 10 bar Pilot actuated: 1,5 1 bar Working temperature C (-0 C with dry air) Fluid Filtered, unlubricated or lubricated compressed air - vacuum Port size G 1/8 - G 1/4 - G 1/ - G 1 Pneumatic piloting G 1/8 port size Nominal diameter G 1/8 = 6 mm; G 1/4 = 8,5 mm; G 1/ = 1 mm; G 1 = 3 mm Piloting valves UMCSV - see chapter Direct acting valves on page.3 ULCSV/R - see chapter Direct acting valves on page.6 C/USCSVG - see chapter Direct acting valves on page.13 Pneumatic piloting XVF4 - see chapter Complementary valves valve on page 3.37 Coils USB - see chapter Coils on page.14 (only for C/USCSVG) USBG - see chapter Coils on page.14 Electric connectors USR 10/N9 - see chapter Connectors on page.15 ULR1B - see chapter Connectors on page.15 MEK 19/N - see chapter Connectors on page.15 MATERIALS Control rod Hardened and nickel-plated steel Body Anodized aluminium alloy Springs Stainless steel Seals NBR rubber Bush rod Brass Piston Acetal resin Terminal strip Acetal resin Washer Brass End plug Nickel-plated brass Clamping screws Steel PILOTING CHART - UK G 1/8 FLOW CHART - UK G 1/8-5/ PILOTING CHART - UK G1/4 (Nl/min) Piloting pressure (bar) Piloting pressure (bar).60
2 G 1/8 - G1/4 - G 1/ - G 1 seriesuk FLOW CHART - UK G 1/4-5/ PILOTING CHART - UK G 1/ (Nl/min) Piloting pressure (bar) FLOW CHART UK - G 1/ - 5/ PILOTING CHART - UK G 1 (Nl/min) Piloting pressure (bar) FLOW CHART - UK G 1-5/ (Nl/min) SPARE PARTS SEALS KIT G 1/8 small pilot system UKA/1/SG/8 G 1/8 small pilot system UKC/1/SG/8 G 1/8 big pilot system UKA/5/SG/8 G 1/8 big pilot system UKC/5/SG/8 5/ G 1/8 UKCA/SG/8 G 1/4 small pilot system UKA/16/SG/4 G 1/4 small pilot system UKC/16/SG/4 G 1/4 big pilot system UKA/3/SG/4 G 1/4 big pilot system UKC/3/SG/4 5/ G 1/4 UKCA/SG/4 G 1/ small pilot system UKA/0/SG/ G 1/ small pilot system UKC/0/SG/ G 1/ big pilot system UKA/40/SG/ G 1/ big pilot system UKC/40/SG/ 5/ G 1/ UKCA/SG/ G 1 UKA/SG/1 G 1 UKC/SG/1.61
3 seriesuk G 1/8 -, 3 and 5 PORT PILOT ACTUATED VALVES* G 1/8 -, 3 and 5 PORT P = 1 bar (NI/min) Weight (g) TYPE* UKA 8/ UKC 8/1 small UKC 8/1/SA Adjustable small UKC 8/1/T UKA 8/ UKC 8/5** big UKC 8/5/SA Adjustable big UKC 8/5/T 5/ Pneumatic UKCA UKCA8/SA * FOR THE PILOT ACTUATED VALVES OBTAINABLE WITH XVF4 SEE THE TABLE SOLENOID ACTUATED VALVES ON PAGE.64 ** IF THE TYPE INCLUDES THE SUFFIX /MR, THIS VALVE CAN BE USED TO SWITCH VACUUM P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 8/1; UKHC 8/5 3 PORT SMALL PNEUMATIC 3 PORT BIG PNEUMATIC HOLES Ø4.3 HOLES Ø4.3 FUNCTION L
4 G 1/8 -, 3 and 5 PORT seriesuk UKC 8/1/T UKC 8/5/T HOLES Ø4.3 HOLES Ø4.3 SPRING CALIBRATION UKC8/1/T SPRING CALIBRATION UKC8/5/T Turns of the needle Turns of the needle Piloting pressure (bar) Piloting pressure (bar) 5 PORT 5 PORT WITH XVF4 HOLES Ø4.3 HOLES Ø4.3.63
5 seriesuk G 1/8 -, 3 and 5 PORT SOLENOID ACTUATED VALVES G 1/8 -, 3 and 5 PORT P = 1 bar (Nl/min) Weight (g) type UKA 8/1/U* UKC 8/1/U* UKA 8/5/U** UKC 8/5/U** 5/ Solenoid UKCA 8/U** * TYPES OF THESE SOLENOID VALVES INCLUDE THE PILOTING SOLENOID VALVES UMCSV - SEE ON PAGE.3 (SPECIFY THE VOLTAGE IN THE ORDER) ** TYPES OF THESE SOLENOID VALVES DO NOT INCLUDE THE PILOTING SOLENOID VALVES (SEE ON PAGE.6 FOR ULCSV/R AND ON PAGE.13 FOR C/USCSVG ) WHEREAS USING AS PILOT THE VALVE XVF4 THE RESULT IS A LOW PRESSURE PILOT ACTUATED VALVE (FOR XVF4 - SEE ON PAGE 3.37) P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 8/1/U; UKHC 8/5/U 3 PORT SMALL SOLENOID 3 PORT BIG SOLENOID WITH ULCSV/R HOLES Ø4.3 HOLES Ø4.3 3 PORT BIG SOLENOID WITH C/USCSVG FUNCTION L 3 18 HOLES Ø4.3.64
6 Accessories Bases G 1/8 seriesuk 5 PORT WITH ULCSV/R 5 PORT WITH C/USCSVG HOLES Ø4.3 HOLES Ø4.3 FIXED LENGHT BASE FOR MANIFOLD MOUNTING OF VALVES G 1/8 - CK8 4 HOLES Ø4.5 No. of stations 3 5 L Weight(g) TYPE* CK8/ CK8/3 CK8/5 * FIXED LENGHT BASES ARE SUPPLIED COMPLETE WITH NOTCH SCREWS AND SEALS.65
7 seriesuk G 1/4 -, 3 and 5 PORT PILOT ACTUATED VALVES* G 1/4 -, 3 and 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE UKA 4/16 small UKC 4/ UKC 4/16/SA UKA 4/3 big UKC 4/3** UKC 4/3/SA 5/ Pneumatic UKCA UKCA 4/SA * FOR THE PILOT ACTUATED VALVES OBTAINABLE WITH XVF4 SEE THE TABLE SOLENOID ACTUATED VALVES ON PAGE.67 ** IF THE TYPE INCLUDES THE SUFFIX /MR, THIS VALVE CAN BE USED TO SWITCH VACUUM P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 4/16; UKHC 4/3 3 PORT SMALL PNEUMATIC 3 PORT BIG PNEUMATIC FUNCTION L 30 5,5.66
8 G 1/4 -, 3 and 5 PORT seriesuk 5 PORT 5 PORT WITH XVF4 SOLENOID ACTUATED VALVES G 1/4 -, 3 and 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE UKA 4/16/U* UKC 4/16/U* UKA 4/3/U** UKC 4/3/U** 5/ Solenoid UKCA 4/U** * TYPES OF THESE SOLENOID VALVES INCLUDE THE PILOTING SOLENOID VALVES UMCSV - SEE ON PAGE.3 (SPECIFY THE VOLTAGE IN THE ORDER) ** TYPES OF THESE SOLENOID VALVES DO NOT INCLUDE THE PILOTING SOLENOID VALVES (SEE ON PAGE.6 FOR ULCSV/R AND ON PAGE.13 FOR C/USCSVG ) WHEREAS USING AS PILOT THE VALVE XVF4 THE RESULT IS A LOW PRESSURE PILOT ACTUATED VALVE (FOR XVF4 - SEE ON PAGE 3.37) P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 4/16/U; UKHC 4/3/U 3 PORT SMALL SOLENOID 3 PORT BIG SOLENOID WITH ULCSV/R.67
9 seriesuk G 1/4 -, 3 and 5 PORT Bases 3 PORT BIG SOLENOID WITH C/USCSVG 5 PORT WITH ULCSV/R 5 PORT WITH C/USCSVG FUNCTION L 30 5,5 FIXED LENGHT BASE FOR MANIFOLD MOUNTING OF VALVES G 1/4 - CK4 4 HOLES Ø5.5 No. of stations L Weight (g) TYPE* CK4/ CK4/3 CK4/4 CK4/5 CK4/8 * FIXED LENGHT BASES ARE SUPPLIED COMPLETE WITH NOTCH SCREWS AND SEALS.68
10 G 1/4 -, 3 and 5 PORT seriesuk PILOT ACTUATED VALVES* G 1/ -, 3 and 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE UKA /0 small UKC / UKC /0/SA UKA /40 big UKC /40** UKC /40/SA 5/ Pneumatic UKCA UKCA /SA * FOR THE PILOT ACTUATED VALVES OBTAINABLE WITH XVF4 SEE THE TABLE SOLENOID ACTUATED VALVES ON PAGE.70 ** IF THE TYPE INCLUDES THE SUFFIX /MR, THIS VALVE CAN BE USED TO SWITCH VACUUM P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA /0; UKHC /0 3 PORT SMALL PNEUMATIC 3 PORT BIG PNEUMATIC FUNCTION L
11 seriesuk G 1/ -, 3 and 5 PORT 5 PORT 5 PORT WITH XVF4 SOLENOID ACTUATED VALVES G 1/ -, 3 and 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE UKA /0/U* UKC /0/U* UKA /40/U** UKC /40/U** 5/ Solenoid UKCA /U** * TYPES OF THESE SOLENOID VALVES INCLUDE THE PILOTING SOLENOID VALVES UMCSV - SEE ON PAGE.3 (SPECIFY THE VOLTAGE IN THE ORDER) ** TYPES OF THESE SOLENOID VALVES DO NOT INCLUDE THE PILOTING SOLENOID VALVES (SEE ON PAGE.6 FOR ULCSV/R AND ON PAGE.13 FOR C/USCSVG ) WHEREAS USING AS PILOT THE VALVE XVF4 THE RESULT IS A LOW PRESSURE PILOT ACTUATED VALVE (FOR XVF4 - SEE ON PAGE 3.37) P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. 3 PORT SMALL SOLENOID 3 PORT BIG SOLENOID WITH ULCSV/R.70
12 G 1/ -, 3 and 5 PORT Bases 3 PORT BIG SOLENOID WITH C/USCSVG 5 PORT WITH ULCSV/R seriesuk 5 PORT WITH C/USCSVG FUNCTION L FIXED LENGHT BASE FOR MANIFOLD MOUNTING OF VALVES G 1/ - CK 4 HOLES Ø5.5 No. of stations 3 5 L Weight(g) TYPE* CK/ CK/3 CK/5 * FIXED LENGHT BASES ARE SUPPLIED COMPLETE WITH NOTCH SCREWS AND SEALS.71
13 seriesuk G 1 -, 3 and 5 PORT PILOT ACTUATED VALVES* G 1 -, 3 AND 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE UKA UKC 1** 5/ Pneumatic UKCA 1 * FOR THE PILOT ACTUATED VALVES OBTAINABLE WITH XVF4 SEE THE TABLE SOLENOID ACTUATED VALVES ON PAGE.73 ** IF THE TYPE INCLUDES THE SUFFIX /MR, THIS VALVE CAN BE USED TO SWITCH VACUUM P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 1; UKHC 1 UKA 1 - UKC 1 UKCA 1 HOLES Ø10 HOLES Ø10 3 PORT WITH XVF4 5 PORT WITH XVF4 HOLES Ø10 HOLES Ø10.7
14 G 1 -, 3 and 5 PORT seriesuk SOLENOID ACTUATED VALVES G 1 -, 3 AND 5 PORT P = 1 bar (Nl/min) Weight (g) TYPE* UKA 1/U UKC 1/U 5/ Solenoid UKCA 1/U * THE TYPES OF THE SOLENOID VALVES DO NOT INCLUDE THE PILOTING SOLENOID VALVES (SEE ON PAGE.6 FOR ULCSV/R AND ON PAGE.13 FOR C/ USCSVG ) WHEREAS USING AS PILOT THE VALVE XVF4 THE RESULT IS A LOW PRESSURE PILOT ACTUATED VALVE (FOR XVF4 - SEE ON PAGE 3.37) P.S.: ADD AT THE TYPE OF THE VALVES 3/ THE LETTER H BETWEEN THE LETTERS K AND A (OR C ) TO ORDER / N.O. (OR / N.C.) VALVES. E.G.: UKHA 1/U; UKHC 1/U 3 PORT WITH ULCSV/R 3 PORT WITH C/USCSVG HOLES Ø10 HOLES Ø10 5 PORT WITH ULCSV/R 5 PORT WITH C/USCSVG HOLES Ø10 HOLES Ø10.73
series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/2 - G 1 Valves series "UK" are produced in trie 2/2, 3/2 and functions. In trie 3 port control versión with small pilot system, sizes G 1/8 and G 1/4,
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2
Series EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, and pneumatic functions. Thanks to a suitable bracket, the piloting solenoid
Poppet valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
Poppet valves manually and mechanically actuated - - DESCRIPTION Valves series "CA" are produced in the /2, /, and 5/ pneumatic functions. The poppet kind of construction and the very rugged control allow
Air treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
MEV. Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA standards size 02. ; i \\\.; I. Spool compact valves series MEV
MEV Spool compact valves pilot and solenoid actuated G 1/8 and to VDMA 24563 standards size 02 Valves series "MEV" have been designed to satisfy trie need of ntegration between pneumatics and electronics.
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
F NI/min. (G1/8), 1600 NI/min. (G1/4), 4600 NI/min.
Series AC Univer : Threaded and Solenoid, Mixed 5/; G/8", /" and /" Diecast aluminum Body 55 psi Operating pressure F Ambient temperature ABOUT UNIVER SERIES AC The "Mixed" system, which has been produced
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
STAINLESS STEEL ACCESSORIES
STAINLESS STEEL E6 P FLOW MICRO-REGULATOR SERIES MRFX E6.2 P IN-LINE FLOW REGULATOR SERIES RFLX E6.4 P CHECK VALVE SERIES VNRX E6.6 STAINLESS STEEL E6.1 FLOW MICRO-REGULATOR SERIES MRFX Main features:
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
Transmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissi
SERIES B VALVES AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 Two-Way Types for bleeding pilots of larger valves, for bleeding cylinders or small pressure systems, operating air tools or motors, opening
INTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
![[Vacuum valves and solenoid valves] 4](/thumbs/95/125066489.jpg "[Vacuum valves and solenoid valves] 4")
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
Special valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2
Spool valves manually and mechanically actuated G 1/8 - G 1/4 - G 1/2 Valves series "EK" are produced in the, and pneumatic functions; the kind of construction is based on a balancee! spool. In the mechanically
Directional Control Valves. G 1 /4, 3/2, 5/2, 3/3 and 5/3 Spool valves
Directional Control Valves G 1 /4, 3/2, 5/2, 3/3 and 5/3 Spool valves Directional control valves G 1 /4 3/2, 5/2, 3/3, 5/3 Spool Valves G 1 /4 Ports This quality and proven range of valves feature a block
CABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
503 series. GENERAL Operating pressure
FEATURES rate up to 00 l/min Spool & Sleeve or rubber packed technology in the same dimension body Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Related Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
4-way pneumatic valves for pipe connection/sub-base mounting
4-way pneumatic valves for pipe connection/sub-base mounting Port size G Orifice () Flow factors (L/min Qn Admissible differential pressure bar Min Max Fluid temp. C Gas Seat disc Reference numbers Power
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Air Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
Directional control - SRK series Solenoid valve
Directional control - series valve valve - 500, 700 Provide CD external dimension. SM SM SMU SMU Small size, big flow rate! high speed, react quickly ; ( Under 10 ms ) with indicator light and voltage
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
Screwed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
COMPACT VALVE - 1/4 Series DS2
COMPACT VALVE - G1/4 Features Suitable for manifold mounting Mounting provision for individual unit Compact size Manual override Wide range of manifolds available Wide range of coil voltages Important
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
SERIES C TYPE VALVES C3 VALVES Port Sizes: Four-Way 5/ UNF or M5 Pneumatic-vacuum to 115 psi (8 bar) (individual valves) Gang mounting (2 or mo
CONDENSED CATALOG CC-2004 SERIES C TYPE VALVES C3 VALVES Port Sizes: Four-Way 5/2 10-32 UNF or M5 Pneumatic-vacuum to 115 psi (8 bar) (individual valves) Gang mounting (2 or more valves) Supply & Exhaust
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
TECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
B SERIES. Bulletin B-2017
Bulletin B-207 B SERIES Versa Product Company, Inc., 22 Spring Valley Rd., Paramus, NJ 0762 USA Phone: (20) 4-2400 Fax: (20) 4-29 Versa BV, Prins Willem Alexanderlaan 427, 72 GB Apeldoorn, The Netherlands
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
Manually actuated valves
Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever
1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
Page No Pneumatic Symbols Cylinders & Accessories
Section 15 Pneumatic Cylinders and Valves Page No Pneumatic Symbols 356-357 Cylinders & Accessories 358-364 Slide Units NEW 365 Shock Absorbers NEW 366 Solenoid Valves 367-372 Pneumatically Operated Valves
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
Line-Mounted Valves L Series. L1 / L2 Series Overview L22 BA4 52. Valve Function. Function PP6 = PP7 = JA4* = JJ4* = JJ5* = JJ6* = JJ7* =
How to order: (example) Line-Mounted L Series L1 / L2 Series Overview L22 BA4 52 Function Function Mounting BA4 = BB4 = PP6 = PP7 = 52 = Line mounted 00* = Manifold mounted w/o Adapter * L11 / L12 series
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
INTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
ACCESSORIES FOR AIR VALVES & AIR SYSTEMS
ACCESSORIES FOR AIR VALVES & AIR SYSTEMS BULLETIN ACC-2000R AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 CERTIFIED FOOT GUARDS Page 8 QUICK EXHAUST & ELECTRIC QUICK EXHAUST VALVES Pages 6 & 7 SHUTTLE VALVES
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
GRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet