Size 00-4a LV HRC fusebases. plates and for direct mounting on busbars. In addition, they serve as bases for LV HRC fuselinks
|
|
- Mariah Pearson
- 5 years ago
- Views:
Transcription
1 Product family fuse-bases Size 00-4a fusebases are suitable for surface mounting on mounting plates and for direct mounting on busbars. In addition, they serve as bases for fuselinks in accordance with DIN Part 1 and for disconnecting blades. They are actuated by a fuse handle in accordance with DIN Part 4 and VDE 0680 Part 4. Size 4a fuse-bases are equipped with a swing-in device. Surface mounting usbar mounting Protection against contact Fuse monitor Direct-connection terminals 8-0
2 Product group Product type 1-pole/surface mounting, AC690V Sizes 00-4a/160A 1600A Page (SASIL) system 3-pole/surface mounting, AC690V 1-pole/busbar mounting, AC690V Sizes 00-4a/160A 1600A Sizes 00-2/160A 400A 3-pole/busbar Sizes 00/160A mounting (40mm ) AC690V fuses (SASIL) S system (SASIT) DIN and S systems 1-pole /surface mounting, AC1200V Sizes 1-3/160A 630A (SALIT) Accessories Sizes Drawings Terminals Technical data LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-1 Appendix
3 Mounting of fuse-base, size 00 Example: 3-pole U00-3IG / IGZ Elevator clamps F70, mm 2 U terminals KU00, 10-95mm 2 Clamp-type terminals S, mm 2 V-terminal clamps P 10-70mm 2 Flat terminal M8 F U00... Partition or side wall Shrouding cover HT For use with partition or sidewalls Alarm switch for monitoring of fuse-links (For use with shrouding covers HT) 8-2
4 Mounting of bus-mounting fuse-base, size 00 Example: 3-pole - for 40mm busbar system, type GU00-3 (SASIL) system Outgoing terminal 3 3 x10mm 2 Clamp-type terminal S mm 2 Elevator clamp F mm 2 Flat terminal F M8 fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) GU00... Terminals LV HRC stripfuseways strip-type fusebases Partition or side wall C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-3 Appendix
5 distribution components fuse-bases 1-pole / surface mounting AC 690V Sizes 00-4a / 160A-1600A Product definition The dimensions of fuse bases of the sizes 00-3, 160A-630A for wall mounting are standardised in accordance with DIN Their technical values are laid down in IEC/EN (see fuse switch-disconnectors). They are designed for voltages of AC690V and DC440V. They are suitable for the insertion of fuse links in accordance with DIN and for knife disconnection contacts. They are actuated with fuse handles in accordance with DIN or VDE The bases are normally equipped with screw terminals for cable lugs. Direct connection terminals are available as an option. They are available either in an open design or with covers to prevent inadvertent contact. A mechanical fuse monitoring device, used together with fuse links with actuating pin, indicates the failure of a fuse (mechanical fuse monitoring Version K in size 00 retrofittable and with sizes 1-3 only installs available). Applications The fuse bases are mounted on plates in low-current distributors or installed in insulating housings. 8-4
6 Size Type of connection Mechanical fuse monitor Protective covering Number of conductors Std.P Type Article No. Size 00 Flat termination Without Without 1 6 U00-1IG U Size 00 Outgoing terminal Without Without 3 6 U00-1IG/3 U Size 00 Flat termination Without With 1 3 U00-1IG/H U Size 00 Flat termination With With 1 3 U00-1IG/K U Size 00 V-terminal clamp Without Without 1 6 U00-1IG/P0070 U Size 00 Clamp-type terminal Without Without 1 6 U00-1IG/S U Size 00 Clamp-type terminal Without With 1 3 U00-1IG/S/H U Size 00 Clamp-type terminal With With 1 3 U00-1IG/S/K U Size 00 ox terminal Without Without 1 6 U00-1IGZ/F70 U Size 00 ox terminal Without Without 1 6 U00-1IGZ/KU00/1 U Size 00 ox terminal Without Without 2 3 U00-1IGZ/KU00/2 U Size 1 Flat termination Without Without 1 1 U1-1IGZ U Size 1 Flat termination Without With 1 1 U1-1IGZ/H U Size 1 Flat termination With With 1 1 U1-1IGZ/K U Size 1 ox terminal Without Without 1 1 U1-1IGZ/KM2G-F U Size 1 V-terminal clamp Without Without 1 1 U1-1IGZ/P1 U Size 1 V-terminal clamp Without Without 2 1 U1-1IGZ/P12 U Size 1 Clamp-type terminal Without Without 1 1 U1-1IGZ/S U Size 2 Flat termination Without Without 1 1 U2-1IGZ U Size 2 Flat termination Without With 1 1 U2-1IGZ/H U Size 2 Flat termination With With 1 1 U2-1IGZ/K U Size 2 ox terminal Without Without 1 1 U2-1IGZ/KM2G-F U Size 2 V-terminal clamp Without Without 1 1 U2-1IGZ/P2 U Size 2 V-terminal clamp Without Without 2 1 U2-1IGZ/P22 U Size 2 Clamp-type terminal Without Without 1 1 U2-1IGZ/S U Size 3 Flat termination Without Without 1 1 U3-1IGZ U Size 3 Flat termination With With 1 1 U3-1IGZ/H U Size 3 Flat termination With With 1 1 U3-1IGZ/K U Size 3 ox terminal Without Without 1 1 U3-1IGZ/KM2G-F U Size 3 V-terminal clamp Without Without 1 1 U3-1IGZ/P3 U Size 3 V-terminal clamp Without Without 2 1 U3-1IGZ/P32 U Size 3 Clamp-type terminal Without Without 1 1 U3-1IGZ/S U Size 4a* Flat termination Without With 1 1 LTL4a-1x/1250/8 T Size 4a* Flat termination Without with 1 1 LTL4a-1x/1600/8 T (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases * Accessories to order, see chapter fuse switch-disconnectors C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-5 Appendix
7 distribution components fuse-bases 3-pole / surface mounting AC 690V Sizes 00-4a / 160A-1600A Product definition The dimensions of fuse bases of the sizes 00-3, 160A/630A for wall mounting are standardised in accordance with DIN Their technical values are laid down in IEC/EN (see fuse switch-disconnectors). They are designed for voltages of AC690V and DC440V. They are suitable for the insertion of fuse links in accordance with DIN and for knife disconnection contacts. They are actuated with fuse handles in accordance with DIN or VDE The bases are normally equipped with screw terminals for cable lugs. Direct connection terminals are available as an option. They are available either in an open design with partitions or with covers to prevent inadvertent contact. A mechanical fuse monitoring device, used together with fuse links with actuating pin, indicates the failure of a fuse (mechanical fuse monitoring Version K in size 00 retrofittable and with sizes 1-3 only installs available). Applications The fuse-bases are fixed on mounting plates or in fitted in insulating cases. 8-6
8 Size Type of connection Mechanical fuse monitor Protective covering Number of conductors Std.P Type Article No. Size 00 Flat termination Without Without 1 1 U00-3IGZ/ST U Size 00 Flat termination Without Without 1 1 U00-3IG U Size 00 Outgoing terminal Without Without 3 1 U00-3IG/3 U Size 00 Flat termination Without With 1 1 U00-3IG/H U Size 00 Flat termination With With 1 1 U00-3IG/K U Size 00 V-terminal clamp Without Without 1 1 U00-3IG/P0070 U Size 00 Clamp-type terminal Without Without 1 1 U00-3IG/S U Size 00 Clamp-type terminal Without With 1 1 U00-3IG/S/H U Size 00 Clamp-type terminal With With 1 1 U00-3IG/S/K U Size 00 Clamp-type terminal Without Without 1 1 U00-3IG/S/SW U Size 00 Flat termination Without Without 1 1 U00-3IG/SW U Size 00 ox terminal Without Without 1 1 U00-3IGZ/F70 U Size 00 ox terminal Without Without 1 1 U00-3IGZ/KU00/1 U Size 00 ox terminal Without Without 2 1 U00-3IGZ/KU00/2 U Size 1 Flat termination Without Without 1 1 U1-3IGZ U Size 1 Flat termination With Without 1 1 U1-3IGZ/K U Size 1 ox terminal Without Without 1 1 U1-3IGZ/KM2G-F U Size 1 V-terminal clamp Without Without 1 1 U1-3IGZ/P1 U Size 1 V-terminal clamp Without Without 2 1 U1-3IGZ/P12 U Size 1 Clamp-type terminal Without Without 1 1 U1-3IGZ/S U Size 2 Flat termination Without Without 1 1 U2-3IGZ U Size 2 Flat termination With Without 1 1 U2-3IGZ/K U Size 2 ox terminal Without Without 1 1 U2-3IGZ/KM2G-F U Size 2 V-terminal clamp Without Without 1 1 U2-3IGZ/P2 U Size 2 V-terminal clamp Without Without 2 1 U2-3IGZ/P22 U Size 2 Clamp-type terminal Without Without 1 1 U2-3IGZ/S U Size 3 Flat termination Without Without 1 1 U3-3IGZ U Size 3 Flat termination With Without 1 1 U3-3IGZ/K U Size 3 ox terminal Without Without 1 1 U3-3IGZ/KM2G-F U Size 3 V-terminal clamp Without Without 1 1 U3-3IGZ/P3 U Size 3 V-terminal clamp Without Without 2 1 U3-3IGZ/P32 U Size 3 Clamp-type terminal Without Without 1 1 U3-3IGZ/S U Size 4a Flat termination Without With 1 1 LTL4a-3x/1250/8 T Size 4a* Flat termination Without With 1 1 LTL4a-3x/1600/8 T Size 4a* Flat termination Without With 1 1 LTL4a-3x3/1250/8 T Size 4a Flat termination Without With 1 1 LTL4a-3x3/1600/8 T * Accessories to order, see chapter fuse switch-disconnectors (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-7 Appendix
9 distribution components fuse-bases 1-pole / busbar mounting AC 690V Sizes 00-2 / 160A-400A Product definition fuse-bases for busbar mounting are standardized in accordance with DIN Part 3. For size 00, DIN Part 6 is also applicable. These standards specify the dimensions. The fuse-bases are equipped with screw terminals for cable lugs at the output side. Optionally, they can also be equipped with direct-connection terminals. Applications fuse-bases are suitable for the insertion of LV HRC fuse-links in accordance with DIN Part 1 and for disconnecting blades. They are actuated by fuse handles in accordance with DIN Part 4 and VDE 0680 Part 4. The fuse-bases are mounted on busbars as visible isolating points. The input side is thus connected directly. Size 4a fuse-bases are equipped with a swing-in device. 8-8
10 Size Outgoing connection usbar fixing Number of conductors Std.P Type Article No. GU... Size 00 Top Screw /AO U Size 00 ottom Screw /AU U Size 00 Top Terminal /SK/AO U Size 00 ottom Terminal /SK/AU U Size 00 Top Terminal /SK/3/AO U Size 00 ottom Terminal /SK/3/AU U Size 00 Top Terminal /SK/F70/AO U Size 00 ottom Terminal /SK/F70/AU U Size 00 Top Terminal /SK/S/AO U Size 00 ottom Terminal /SK/S/AU U Size 1 Variable Screw U Size 2 Variable Screw U (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-9 Appendix
11 distribution components fuse-bases 3-pole / busbar mounting (40mm) AC 690V Size 00 / 160A Product definition fuse-bases for busbar mounting are standardized in accordance with DIN Part 3. For size 00, DIN Part 6 is also applicable (busbar distance 40mm). These standards specify the dimensions. The fuse-bases are equipped with screw terminals for cable lugs at the output side. Optionally, they can also be equipped with direct-connection terminals. Applications fuse-bases are suitable for the insertion of LV HRC fuse-links in accordance with DIN Part 1 and for disconnecting blades. They are actuated by fuse handles in accordance with DIN Part 4 and VDE 0680 Part 4. The fuse-bases are mounted on busbars as visible isolating points. The input side is thus connected directly. Size 4a fuse-bases are equipped with a swing-in device. 8-10
12 Size Outgoing connection Type of connection Number of conductors Std.P Type Article No. GU Size 00 Top Outgoing terminal 3 1 /SK/3/AO U Size 00 ottom Outgoing terminal 3 1 /SK/3/AU U Size 00 Top ox terminal 1 1 /SK/F70/AO U Size 00 ottom ox terminal 1 1 /SK/F70/AU U Size 00 Top Clamp-type terminal 1 1 /SK/S/AO U Size 00 ottom Clamp-type terminal 1 1 /SK/S/AU U Size 00 Top and bottom Outgoing terminal 3 1 X2/SK/3 U Size 00 Top and bottom ox terminal 1 1 X2/SK/F70 U Size 00 Top and bottom Clamp-type terminal 1 1 X2/SK/S U (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-11 Appendix
13 distribution components fuse-bases 1-pole / surface mounting AC 1200V Sizes 1-3 / 250A-630A Product definition The fuse bases of the sizes 1-3, 250A-630A, can be used only together with fuse links, isolating blades and handles made by the same manufacturer, since they are not subject to any DIN standard. The versions Size 1 and Size 2 are supplied complete with contact covers (H). They can also be supplied, if desired, with mechanical fuse monitoring (K). The connection contacts are equipped with screw connectors for cable lugs. Applications Fuse unit for the protection of equipment and cables in DC and three-phase systems. For example for long-distance power transmission, for remote agricultural companies or for DC systems with voltages of up to 1000V, such as electroplating companies or railway systems. 8-12
14 Size Mechanical fuse monitor Std.P Type Article No. Size 1 Without 1 U1-1/1200/H U Size 1 With 1 U1-1/1200/H/K U Size 2 Without 1 U2-1/1200/H U Size 2 With 1 U2-1/1200/H/K U Size 3 Without 1 U3-1/1200 U Size 3 With 1 U3-1/1200/K U (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-13 Appendix
15 distribution components fuse-bases Accessories Accessories Product definition COVER The shrouding cover ensures finger-proof protective covering. PARTITION WALL The partition wall provides screening between the phases. SIDE WALL The side wall provides screening between the fuse base and any neighbouring devices. ASE COVER When working on a disconnected circuit, the base cover prevents inadvertent connection of the circuit. It also prevents inadvertent contact with the live contacts inside the fuse base. FUSE HANDLE This handle, which complies with DIN , is used for inserting and removing the fuse links. MECHANICAL FUSE MONI- TOR In conjunction with fuse-links with striker, the mechanical fuse monitor indicates fuse failure. ISOLATING LADES The isolating blades are suitable for use in fuse bases, for 1200V, of the sizes 1 to 3. SNAP-ON FUSE HANDLES 1200V The snap-on fuse handles are used for the insertion and removal of LV HRC fuse links and isolating blades. MECHANICAL FUSE-MONI- TOR Mechanical fuse monitoring for signalling of fuse failures. (DIN Size 00 and Size 4a) SWITCHING-STATE INDICA- TOR Switching-state indicator for signalling that power is on or off (DIN Size 4a). 8-14
16 Cover without partition Std.P Type Article No. Size 00, surface mounting 6 H-U00-IG/IGZ U Cover with partition Std.P Type Article No. Size 00, surface mounting 6 HT-U00-IG/IGZ U (SASIL) system Cover lateral open Std.P Type Article No. Size 00, surface mounting 3 HSO-U00-IG/IGZ U fuses (SASIL) S system (SASIT) DIN and S systems Cover Std.P Type Article No. Size 1, surface mounting 2 H-U1IGZ U Size 2, surface mounting 2 H-U2IGZ U Size 3, surface mounting 2 H-U3IGZ U (SALIT) Terminals Partition / side wall Std.P Type Article No. Size 00, surface mounting, partition and side wall 8 TW-U00-IG/IGZ U Size 1, surface mounting, partition 2 TW-U1IGZ U Size 2, surface mounting, partition 2 TW-U2IGZ U Size 3, surface mounting, partition 2 TW-U3IGZ U Size 1, surface mounting, side wall 2 SW-U1-IGZ U Size 2, surface mounting, side wall 2 SW-U2-IGZ U Size 3, surface mounting, side wall 2 SW-U3-IGZ U Size 00, left, busbar mounting 6 TWL-GU00 U Size 00, right, busbar mounting 6 TWR-GU00 U LV HRC stripfuseways strip-type fusebases Mechanical fuse monitor Std.P Type Article No. Size 00 (not for KU terminal) 1 K-U00-IG/IGZ U C O S M O - 60mm usbar System ase cover Std.P Type Article No. Size SZ00-R U Size 00, with terminal cover 10 SZ00/H-R U Sizes 1, 2 and 3 10 SZ123-R U Sizes 1, 2 and 3, with terminal cover 10 SZ123/H-R U transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-15 Appendix
17 fuse handle without sleeve Std.P Type Article No. Sizes GPSHE U fuse handle with sleeve Std.P Type Article No. Sizes GPSHE/AI U Handle protection for fuse base Std.P Type Article No. Size 00, Typ H-U00 3 A-GU00-3 G Disconnecting blade 1200V Std.P Type Article No. Size 1 1 TM1/1200 N Size 2 1 TM2/1200 N Size 3 1 TM3/1200 N fuse handle 1200V Std.P Type Article No. 1200V 1 GP1200 U Position indicator mechanical fuse monitor Std.P Type Article No. Size 4a (1- and 3pole) 1 K/EV-LTL4a T Direct-connection terminal Std.P Type Article No. Size 4a, 2-wire connection, mm², Al/Cu 1 KV2HG-F/2/300/AF40-50 K Size 4a, 4-wire connection, mm², Al/Cu 1 K3G/4/AF40-50 K Size 4a, 3-wire connection, mm², Al/Cu 1 K3G/3/AF40-50 K
18 (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-17 Appendix
19 U00-1IG/... Ordering details see page 8-5 U00-1IG/.../(H) Ordering details see page U00-1IGZ/... Ordering details see page 8-5 U00-3IG/... Ordering details see page
20 30 K D (SASIL) system C 25 A 81 10,5 fuses (SASIL) S system (SASIT) DIN and S systems I H E F (SALIT) Typ U1-1/IGZ U2-1/IGZ A C D M10 M10 E F 2 2 G H I K Terminals U3-1/IGZ M , U...-1IGZ/... LV HRC stripfuseways Ordering details see page strip-type 25 9 fusebases Ø C C O S M O - 60mm usbar System 1250A 1600A 155 transformers 22,5 50 M M12 67 Consumer supply technology A 1600A C Distribution and instrument cabinets LTL4a-1x/1250(1600)/8 Ordering details see page 8-5 Powerlizer system electronics 8-19 Appendix
21 U00-3IG/... Ordering details see page 8-7 U00-3IG/... Ordering details see page U00-3IGZ/F70 Ordering details see page
22 H 30 K (SASIL) system C 25 A 81 10,5 D fuses (SASIL) S system (SASIT) DIN and S systems G I G E F (SALIT) Typ U1-3/IGZ U2-3/IGZ U3-3/IGZ A C D M10 M10 M12 E F 2 2 2,5 G H I K Terminals U1-3IGZ... Ordering details see page 8-7 LV HRC stripfuseways strip-type 25 9 fusebases Ø C C O S M O - 60mm usbar System A 1600A transformers 22,5 50 M M Consumer supply technology A 1600A C Distribution and instrument cabinets LTL4a-3x(3)/1250(1600)/8 Ordering details see page 8-7 Powerlizer system electronics 8-21 Appendix
23 20 M M GU00-1/AO GU00-1/AU Ordering details see page 8-9 Ordering details see page GU00-1/SK/.../AO Ordering details see page 8-9 GU00-1/SK/.../AU Ordering details see page
24 57 A (SASIL) system 190, fuses (SASIL) S system M (SASIT) DIN and S systems 104 Typ GU1-1 GU2-1 GU3-1 A ,5 38,5 41,5 (SALIT) Terminals GU1-1, GU2-1 Ordering details see page 8-9 GU00-3/SK/.../AO Ordering details see page 8-11 LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets GU00-3/SK/.../AU Ordering details see page 8-11 GU00-3X2/SK/... Ordering details see page 8-11 Powerlizer system electronics 8-23 Appendix
25 10,5 H C I D 30 C A 6 D A E F G Typ A C D TM1/1200 TM2/1200 TM3/ A 400A 630A Typ U1-1/1200/H U2-1/1200/H U3-1/ A 400A 630A A C D E F 84, G H I 17,5 M10 17,5 M10 25 M12 U...-1/1200/H/(K) Ordering details see page 8-13 TM.../1200 Ordering details see page GP1200 Ordering details see page 8-16 KV2HG-F/2/300/AF40-50 Ordering details see page
26 (SASIL) system fuses (SASIL) S system (SASIT) DIN and S systems (SALIT) Terminals K3G/4/AF40-50 Ordering details see page 8-16 K3G/3/AF40-50 Ordering details see page 8-16 LV HRC stripfuseways strip-type fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-25 Appendix
27 Technical data for fuse-bases (in accordance with EN and EN ) Type U00-1 U00-3 U1-1 U1-3 Electrical characteristics Rated operational voltage U e V Rated operational current I e A Conventional free air thermal current with fuses I th A Conventional free air thermal current with solid links I th A Rated frequency - Hz AC690 AC M8 M10 1 x (max. width 25) x x S Cu/ribbon 6x9x Cu/ribbon 6 x16x0.8 S P F70 KU Al/Cu Al/Cu P Al/Cu 2 x (70-90) P Al/Cu KM G-F 40 Fuselinks Size to DIN Max. rated current (gl/gg) I e A Max. permis. power loss per fuse-link P v W Mechanical characteristics Weight 1) - kg 0.14/ /1.7 Cable connection Flat terminal olt diameter - - Cable lug (DIN ) - mm 2 Flat bar - mm Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Type of protection Front side Operational state - - Device fitted IP00 IP00 Operating conditions 1) Without packaging Ambient temperature 2) T u C Rated operating mode - - Actuation - - Mounting position - - Altitude - m Pollution degree - - Overvoltage category to to +55 Continuous operation Continuous operation - - Vertical, horizontal Vertical, horizontal Up to 2000 Up to III III 2) 35 C normal temperature, at 55 C with reduced operating current 8-26
28 Technical data for fuse-bases (in accordance with EN and EN ) Type U2-1 U2-3 U3-1 U3-3 Electrical characteristics Rated operational voltage U e V Rated operational current I e A Conventional free air thermal current with fuses I th A Conventional free air thermal current with solid links I th A Rated frequency - Hz AC690 AC (SASIL) system Fuselinks Size to DIN Max. rated current (gl/gg) I e A Max. permis. power loss per fuse-link P v W fuses (SASIL) S system Mechanical characteristics Weight 1) - kg 0.7/ /2.7 (SASIT) DIN and S systems Cable connection Flat terminal olt diameter - - Cable lug (DIN ) - mm 2 Flat bar - mm Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm M10 M x x S2 P2 P Cu/ribbon 10 x 16 x 0,8 Ribbon 11 x 21 x 1 S P x ( ) 2 x ( ) P KM2- G-F KM2- G-F (SALIT) Terminals LV HRC stripfuseways Type of protection Front side Operational state - - Device fitted IP00 IP00 strip-type Operating conditions 1) Without packaging Ambient temperature 2) T u C Rated operating mode - - Actuation - - Mounting position - - Altitude - m Pollution degree - - Overvoltage category to to +55 Continuous operation Continuous operation - - Vertical, horizontal Vertical, horizontal Up to 2000 Up to III III fusebases 2) 35 C normal temperature, at 55 C with reduced operating current C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-27 Appendix
29 Technical data for fuse-bases (in accordance with EN and EN ) Type LTL4a - 1/1250 LTL4a - 3/1250 LTL4a - 1/1600 LTL4a - 3/1600 Electrical characteristics Rated operational voltage U e V Rated operational current I e A Conventional free air thermal current with fuses I th A Conventional free air thermal current with solid links I th A Rated frequency - Hz Rated insulation voltage U i V Rated conditional short-circuit current - ka eff Rated short-time withstand current (1sec) I cw ka eff Utilization category - - Rated making capacity - A Rated breaking capacity - A Rated impulse withstand voltage U imp kv Operating cycles with current - - Total power loss at I th (without fuse) 3) P v W AC500 AC690 AC500 AC AC800 AC AC - 22 AC- 21 AC - 22 AC Fuselinks Size to DIN max. Max. rated current (gl/gg) I N A Max. permis. power loss per fuse-link P v W 4a 4a Mechanical characteristics Operating cycles without current - - Weight 1) - kg / /15.7 Cable connection Flat terminal olt diameter - - Cable lug (DIN ) - mm 2 Flat bar - mm Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torquet M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm Terminal Clamping cross-section - mm 2 Tightening torque M a Nm 1xM16 2 xm Max. 80 x 30 Max. 80 x KV2HG/2/300/ KV2HG/2/300/ 2 x (95-300) AF40-50 AF x (95-300) K3G/3/A x (95-150) K3G/3/A x (95-150) K3G/4/A x (95-150) K3G/3/A x (95-150) Type of protection Front side Operational state - - Device fitted Front cover open - - IP20 IP10 IP20 IP10 Operating conditions 1) Without packaging Ambient temperature 2) T u C Rated operating mode - - Actuation - - Mounting position - - Altitude - m Pollution degree - - Overvoltage category to to +55 Continuous operation Continuous operation Dependent manual operation Dependent manual operation Vertical Vertical Up to 2000 Up to III III 2) 35 C normal temperature, at 55 C with reduced operating current 3) Data for 3-pole version 8-28
30 Technical data for fuse-bases Type U1-1/1200 U2-1/1200 U3-1/1200 Electrical characteristics Rated operational voltage U e V Rated operational current I e A Conventional free air thermal current with fuses I th A Conventional free air thermal current with solid links I th A Rated frequency - Hz (SASIL) system Fuselinks Size - - Max. rated current (gl/gg) I e A Max. permis. power loss per fuse-link P v W fuses (SASIL) S system Mechanical characteristics Weight 1) - kg (SASIT) DIN and S systems Cable connection Flat terminal olt diameter - - Cable lug (DIN ) - mm 2 Flat bar - mm Tightening torque M a Nm M x M x M x (SALIT) Type of protection Front side Operational state - - Device fitted IP 00 IP 00 IP 00 Terminals Operating conditions Ambient temperature 2) T u C Rated operating mode - - Actuation - - Mounting position - - Altitude - m Pollution degree - - Overvoltage category to +55 Continuous operation - Vertical, horizontal Up to III -25 to +55 Continuous operation - Vertical, horizontal Up to III -25 to +55 Continuous operation - Vertical, horizontal Up to III LV HRC stripfuseways strip-type 1) Without packaging 2) 35 C normal temperature, at 55 C with reduced operating current fusebases C O S M O - 60mm usbar System transformers Consumer supply technology Distribution and instrument cabinets Powerlizer system electronics 8-29 Appendix
9-0. Product family. LV HRC fuse switch-disconnectors. Surface mounting Busbar mounting
Product family fuse switch-disconnectors The 9 series fuse switch-disconnectors of the DIN sizes 00-4a are suitable for surface mounting on mounting plates and for direct mounting on busbars. The different
More information6-0. Product family. LV HRC strip-fuseways
Product family strip-fuseways strip-fuseways in accordance with DIN 43623 are mainly used for power distribution in cable distribution cabinets and low voltage power supply distribution systems. They are
More informationLV HRC fuse switch-disconnectors
The 9 series LV HRC fuse switch-disconnectors of the DIN sizes 00-4a are suitable for surface mounting on mounting plates and for direct mounting on busbars. The different sizes are available as 1-pole,
More informationmainly used for power distribution
Product family strip type fuse-switch-disconnector strip type fuseswitch-disconnectors are mainly used for power distribution in low voltage assemblies in accordance with IEC/EN 60439-1. The strips are
More informationStandardized fuse characteristics
Product family "Fuses offer unique advantages compared to other protective devices." Standardized fuse characteristics and high current limitation guarantee easy and reliable coordination between HV HRC
More informationmainly used for power distribution
Product family strip type fuse-switch-disconnector strip type fuseswitch-disconnectors are mainly used for power distribution in low voltage assemblies in accordance with IEC/EN 60439-1 (VDE 0660 Teil
More informationVertical fuse disconnects
THE NAME FOR SAFETY Vertical fuse disconnects Vertical fuse disconnects Vertical fuse disconnects are designed to receive NH fuse links. Hinged fuse-carriers enable opening and closing operation in electric
More informationProduct family. D type fuse-links
Product family D type fuse-links Fuses offer unique advantages compared to other protective devices. 3-0 Due to their compact dimensions, D type fuses from JEAN MÜLLER provide economical overcurrent protection
More informationHorizontal fuse disconnects
THE NAME FOR SAFETY Horizontal fuse disconnects Horizontal fuse disconnects Horizontal fuse Disconnects are used in building installations, switchgear and controlgear as well as in power utility networks.
More informationSpecial Purpose Fuses
Special Purpose Fuses Fuses for DC voltage applications www.eti.si ETI Elektroelement d.d. Obrezija 5, SI - 111 Izlake Slovenija Tel. + 38 03 5 57 570 Faks + 38 03 5 7 077 eti@eti.si NH DC 80 V - Telecom
More informationVertical fuse disconnects
THE NAME FOR SAFETY Vertical fuse disconnects Vertical fuse disconnects Vertical fuse disconnects are designed to receive NH fuse links. Hinged fusecarriers enable opening and closing operation in electric
More informationVertical fuse disconnects
Vertical fuse disconnects Vertical fuse disconnects Vertical fuse disconnects are designed to receive NH fuse links. Hinged fuse-carriers enable opening and closing operation in electric circuits under
More informationvertical fuse switch disconnectors
SWITCHGEAR ARS vertical fuse switch disconnectors - touch protection IP 30 from the front - fibre glass extra strenghtened, self extinguishing thermoplastics - double clearance between open contacts -
More informationTyp 415 NH-Sicherungsleisten, BTVA/BTVA-P, NH 1/2/3, 250/400/630 A, 185mm Sammelshienenabstand
LV-SWITCHING DEVICES / NH-SCHALTGERÄTE 1 Vertical 415 design fuse rails TRIVER / NH-Sicherungsleisten TRIVER Range / Produktpalette Type 415 fuse rails BTVA/BTVA-P, NH 1/2/3, 2/400/, mm busbars spacing
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationMULTIBLOC 2.RST8 Size 2, 400A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 2.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 2.RST8 comprises NH fuse switch disconnectors for 400A. Products are designed in triple
More informationSwitch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
More informationMULTIBLOC 1.RST8 Size 1, 250A, 690VAC, Design for bus bar installation, Triple Pole
MULTIBLOC 1.RST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC 1.RST8 comprises NH fuse switch disconnectors for 250A. Products are designed in triple
More informationFuse Switch Disconnectors XNH. Fuse Switch Disconnectors XNH... For fuse links NH000 to NH3. Rated operating current of 160, 250, 400 and 630A
www.eaton.eu Panel Building Accessories PIFT Plug In Fused Terminal Fuse Disconnectors Thermostats Filters and Fans Terminals Electrical Cabinet Heating Catalogue 2016 Fuse Switch Disconnectors XNH Fuse
More informationMULTIBLOC 3.ST8 Size 3, 630A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 3.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 3.ST8 comprises NH fuse switch disconnectors for 630A. They are designed for bottom
More information15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250
More informationTechnical data. Busbar support 3 7, 5 6, 8 ETIBUSBAR 1 0, 5 BBS-60/4
Busbar support 20 30 BBS-/1 BBS-/3 57 52 29 29 1 5 3 0 1 5 10 2 0 5 3 7, 5 6 0 6 0 6 0 6, 8 12 1 0, 5 7 5 1 2 5 2 4 0 20 30 18 BBS-/4 563 98,5 10 29 93,5 5 29 18 75 180 10,5 6,8 30 30 25 20 52,5 12 BBS-/3-16
More informationFuse switch-disconnectors
Fuse switch-disconnector FH000 is intended for fuse-links with blade contacts size 000. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
More informationSiemens AG Switch Disconnectors SENTRON. Configuration. Edition 10/2015. Manual. siemens.com/lowvoltage
SENTRON Configuration Manual Edition 10/2015 siemens.com/lowvoltage 2 Introduction LD main control and EMERGENCY-STOP switches up to 250 A 4 Introduction 7 Front mounting 10 Floor mounting 11 Distribution
More informationUtilisation category gl/gg 500VAC with combi indicator
DIN-fuse-links DIN fuse-links are used for the protection of electrical installations and equipment and are common for a wide area of applications. Standardised characteristics, technical data and dimensions
More informationSENTRON Switching and Protection Devices Switch Disconnectors
SENTRON Switching and Protection Devices Switch Disconnectors /2 Introduction 3K, 3KE, 3LD Switch Disconnectors 3K, 3KE Switch Disconnectors up to 1000 /4 General data /8 Floor mounting 3LD Main and EMERGENCY-STOP
More informationMULTIBLOC 1.ST8 Size 1, 250A, 690VAC, Design for Bottom Fitting, 1-,2-,3-,4-pole
MULTIBLOC 1.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 1.ST8 comprises NH fuse switch disconnectors for 250A. They are designed for bottom
More informationINNOZED D0 fuse-bases with touch protection
INNOZED D0 fusebases with touch protection INNOZED D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS INNOZED is a fuse base for D0 fuselinks,
More informationMULTIBLOC 2.ST8 Size 2, 400A, 690VAC, Design for Bottom Fitting, 3-,4-pole
MULTIBLOC 2.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR The production programme of MULTIBLOC series 2.ST8 comprises NH fuse switch disconnectors for 400A. They are designed for bottom
More information3NP1 Fuse Switch Disconnectors up to 630 A
Switch Disconnectors 3NP1 Fuse Switch Disconnectors up to 630 A Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors
More informationINNOZED D0 fuse-bases with touch protection
D0 fusebases with touch protection D0 fusebases with touch protection FUSE HOLDERS, FUSE BASES AND SUPPORTS IEC D0 & D FUSE BASES FEATURES & BENEFITS is a fuse base for D0 fuselinks, sizes D0 and D02.
More informationFuse switch disconnectors
SWITCHGEAR 62 RBK pro Fuse switch disconnectors designed for distribution of electricity and protection of electrical equipment against short-circuits and overloads with industrial fuse links. ENERGY SAFELY
More informationBETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
More informationMULTIVERT 250A Size 1, 690VAC
MULTIVERT 250A IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors.
More informationMULTIBLOC 000.ST8 Size 000, 100A, 690VAC, Design for Bottom Fitting, Triple Pole
MULTIBLOC 000.ST8 IEC FUSE SWITCH DISCONNECTORS NH FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS The production programme of MULTIBLOC 000.ST8 comprises NH fuse switch disconnectors for 100A. They are designed
More informationVarius SUMMARY OF MODELS
Varius SUMMARY OF MODELS Type FH00 FH1 FH2 FH3 LTL4a Rated operating current I e 160 A 160 A 250 A 400 A 630 A 1 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00
More informationFuse switch disconnectors
SWITCHGEAR RBK Fuse switch disconnectors intended for distribution of electricity and protection of electrical equipment against short-circuits and overloads, with industrial fuse links ENERGY SAFELY SWITCHED
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationMULTIVERT 1000A Main Incomer, 690VAC
IEC FUSE SWITCH DISCONNECTORS NH VERTICAL FUSE SWITCH DISCONNECTOR FEATURES & BENEFITS MULTIVERT NH vertical fuse switch disconnectors meet all functions of NH fuse switch disconnectors. They are designed
More information2013 JEAN MÜLLER Products
2013 JEAN MÜLLER Products Company JEAN MÜLLER JEAN MÜLLER was founded in 1897 in Germany, when the applications of electricity were still in their very early days. The company chose as its basic activity
More informationW DATASHEET: MINIATURE CIRCUIT BREAKER (MCB), SERIES AMPARO
W DATASHEET: MINIATURE CIRCUIT BREAKER (MCB), SERIES AMPARO W SCHRACK-INFO Lift and clamp terminals on both sides Terminal guide for secure connection Terminal cross-section: 1-25mm² Snap-on mounting for
More informationPower distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly
NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter
More informationMotorized switch-disconnectors OTM 40 to 125 Amperes
Motorized switch-disconnectors OTM to 125 mperes With the new range of motorized-switch disconnectors, BB offers now a full range from to 2500 mperes. Thanks to the design, OTM...125 are a good solution
More informationFUSOMAT Visible breaking and tripping fuse switches from 250 to 1250 A
Fuse protection The solution for > Motor load break > Protection of industrial cabinet > Electrical distribution fusom_063_b_1_cat Strong points > Tripping upon overload > High breaking capacity > Improved
More information3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
More informationCylindrical fuse-link
Cylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity Characteristics ody material 00 V AC, 00 V AC, 90 V AC CH 8 - A/00 V CH 0,- A/00 V, 0-3 A/00 V CH
More informationSpecial Purpose Fuses
Special Purpose Fuses Multimeter fuses Metering Fuses Telecom fuses NH 80V Fuses for DC voltage applications NH am 00V a.c. NH gg 0V a.c. Safe work fuses SWF Fuses for protection of forklift batteries
More informationIn-line Plug-in Design 3NJ6
Contents Page - Outgoing Feeders General 6/2 Structure and Functions inclusive Forms of Internal Separation, Installation of Instruments 6/2 Plug-on Bus System 6/2 Cable Connection Compartment 6/2 Switch-disconnector-fuse
More informationPROTECTION AND CONNECTION. ABB Compact ATS Compact without compromise
PROTECTION AND CONNECTION ABB Compact ATS Compact without compromise 2 A B B C O M PA C T AT S C O M PA C T W I T H O U T C O M P R O M I S E ABB ARTICLE COMPACT OR CHAPTER ATS COMPACT TITLE WITHOUT COMPROMISE
More informationNH-Fuse system Low voltage
38103-FER NH-fuses A4-engl 22.10.2003 15:50 Uhr Seite 3 NH-Fuse system Low voltage 38103-FER NH-fuses A4-engl 22.10.2003 14:01 Uhr Seite 2 Utilization NH-fuses gg am gtr NH-fuses Utilization Categories
More informationype UP T Busplugs Low Voltage Switchboard Equipment
Busplugs Type UP Low Voltage Switchboard Equipment Publication UP 2013 Since product improvement is a continuing policy, we reserve the right to change specifications without notice. Contents Descriptive
More informationLINOCUR Size D02 63A 230VAC/440VAC
IEC FUSE SWITCH DISCONNECTORS D0 FUSE COMBINATION UNITS The D0 Linocur is a combination of switch disconnector fuse and Neozed 63A fuse-link, equiped with significant safety characeristics and sophisticated
More informationIndex. Manual Motor Starters 1. Auxiliary Contact Blocks 1. Trip Alarm Auxiliary 1. Switch. Shunt Release 1. Under-voltage Release 2.
Index Index Page Manual Motor Starters 1 Auxiliary Contact Blocks 1 Trip Alarm Auxiliary 1 Switch Shunt Release 1 Under-voltage Release 2 Accessories 2 Busbar Connectors 2 Enclosures 2 Leistung, kw C mv
More informationCircuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases
Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters
More informationProduct index. 4 - Manual motor protectors. Phone: Fax: Web: -
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
More information8WH2 Spring-Loaded Terminals
8WH2 Spring-Loaded Terminals /2 Introduction /3 General data on 8WH /7 8WH through-type terminals 1) /18 8WH hybrid through-type terminals 1) /21 8WH fuse terminals /23 8WH isolating blade terminals /25
More informationTAE pole Contactors
TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges
More informationFuse Switch Disconnectors XNH. Fuse Switch Disconnectors XNH... For fuse links NH000 to NH3. Rated operating current of 160, 250, 400 and 630A
www.eaton.eu Panel Building Accessories PIFT Plug In Fused Terminal Fuse Disconnectors Filters and Fans Fuse Switch Disconnectors XNH Thermostats Terminals Catalogue 2017 Electrical Cabinet Heating Fuse
More informationMOULDED CASE CIRCUIT BREAKERS BC160N
D MOULDED CASE CIRCUIT BREAKERS BC160N D BC160N COMMERCIAL INFORMATION Circuit breakers...d4 Switch-disconnectors...D5 Connecting sets......d6 Mounting sets......d6 Switches...D7 Shunt trips...d7 Undervoltage
More informationSENTRON 3NP1 Fuse Switch Disconnectors up to 630 A
Introduction Overview All key product features at a glance available for all sizes Connection of circular conductors and laminated conductors Fuse monitoring possible throughout Busbar supports can be
More informationProduct index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
More informationElectronic overload relays EF205 and EF370
Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
More informationIEC Low Voltage General Purpose Protection
, 6A, 0/400VAC (/440VAC) Complying with DIN VDE 0660 Part 07 EN / IEC 60947- DIN VDE 066 Part IEC 6069- DIN VDE 068 DIN VDE 4880 The D0-LINOCUR is a combination of switch-disconnector-fuse and NEOZED 6
More informationContact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
More informationSD, SE, SDE, SCO series Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches,
4 Electrics for Rolling Stock Multipole switchgear for rail vehicles: Disconnecting switches, Earthing Switches, Disconnector with Earthing Switches, Change-Over-Switches 600 V to 3 kv Catalogue F84.en
More informationPage. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases
Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar
More informationApplication Mini Contactors for Motors and Resistive Loads
Delivery program Contactor, 4p, 4kW/400V/AC3 Part no. DILEM4-G(24VDC) Catalog No. 012701 Eaton Catalog No. XTMF9A00TD Product range Contactors Application Mini Contactors for Motors and Resistive Loads
More informationConnecting sets CS-FS CS-FS123-WD. Connecting space covers OD-FS00-.. OD-FS123-KP. Adapter for parallel outlet - HP-SE/K
Varius SUMMARY OF MODELS OF FUSE-RAILS Type FSR00 FSR1 FSR2 FSR3 Rated operating current I e 160 A 250 A 400 A 630 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V Size 00 1 2 3 Busbar spacing
More informationW DATA SHEET: COMBINED FAULT-CURRENT PROTECTIVE SWITCH, SERIES BOLF, 3P+N
W DATA SHEET: COMBINED FAULT-CURRENT PROTECTIVE SWITCH, SERIES BOLF, 3P+N W SCHRACK-INFO Typ A (pulse) Connection on both sides are possible Tripping independent of line voltage Additional connection capability
More informationApproved Standards. Ordering Information. Thermal Overload Relay J7TKN. Model Number Legend. Thermal Overload Relay. Accessories
Thermal Overload Relay J7TKN ) Thermal Overload Relay Direct and separate mounting Single phasing sensivity according to IEC 60947-4-1 Finger proof (BGV A2) Accessories Set for single mounting Approved
More informationRecommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications.
Metal-Enclosed Limit Switches ENM2 Recommended use With its standard enclosure, the ENM2 limit switch can be used universally in all industrial and safety applications. Product advantages Standard switch
More informationBSL Size 1 250A, Size 2 400A, Size 3 630A, 690VAC
BSL Size 1 250A, Size 2 400A, Size 3 630A, 690VAC FUSE RAILS IEC NH FUSE RAILS FEATURES & BENEFITS Installation on to Dimensions of s and cable connections are equivalent to those of MULTIVERT APPLICATIONS
More informationEmergency stop without emergency switching off/emergency stop function. Locking facility Lockable in the 0 (Off) position N/O 0 B 0
MainswitchSurfacemounting Partno. T0-2-1/I1/SVB-SW Articleno. 207148 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationMS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories
Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10
More informationPhone: Fax: Web: -
HK1-11 HKF1-11 HK-11 HKS-20 uxiliary contacts Mounting uxiliary contacts position Pilot duty rating Instantaneous Lagging / leading / max. 116 132 5x 9x quantity ac dc NO NC NO NC 2 - - - HK1-20 Right
More informationResidual Current Protective Devices / Arc Fault Detection Devices (AFDDs)
Introduction Overview Devices Page Application Standards Used in / Personnel, material and fire protection, as well as protection against direct contact. SIGRES with active condensation protection for
More informationCOMPONENTS. Off-load Switch for Fixed Installation Title type SW
COMPONENTS Off-load Switch for Fixed Installation Title type SW General information The SW off-load switch is a complete range designed to cover all the applications to be met in DC traction power substations
More information06/001. Overload Relays, Motor-Protective Relays Overview. Overload / Motor-Protective Relays. Moeller HPL /2002
Overload Relays, Motor-Protective Relays Overview 06/00 Overload relays, motor-protective relays Page Technical overview 06/00 System overview 05/006 Overload relays, motor-protective relays 06/004 ZE,
More informationDATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
More informationMedium Voltage Distribution PIX. Air Insulated Switchgear up to 24 kv PARS TABLEAU
Medium Voltage Distribution PIX Air Insulated Switchgear up to kv PIX Air Insulated Switchgear up to kv The PIX system has been designed in accordance with international (IEC) standards, and gives an optimal
More informationFL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
More informationMotor-protectivecircuit-breaker,3p,Ir=2.5-4A. Product range PKZM01 motor protective circuit-breakers up to 16 A with pushbutton actuation
Motor-protectivecircuit-breaker,3p,Ir=2.5-4A Partno. PKZM01-4 Articleno. 278482 CatalogNo. XTPB004BC1 Deliveryprogramme Product range PKZM01 motor protective circuit-breakers up to 16 A with pushbutton
More informationGeneral technical data: CONTACTOR, AC-3, 5.5KW/400V, 1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S00 SCREW TERMINAL. product brand name
Data sheet CONTACTOR, AC-3, 5.5KW/400V, 1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S00 SCREW TERMINAL product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS Type 10 14 22 OPT22/OPT20 OPVF10 Rated operating current I e / Rated current I n 32 A / - 63 A / - 125 A / - 63 A / - - / 30 A Rated operating voltage U e / Rated voltage U n AC 690 V
More informationSIRIUS 3RU2 Thermal Overload Relays
Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to
More informationMotors Automation Energy Transmission & Distribution Coatings. Automation Contactors - CWM Line
Motors Automation Energy Transmission & Distribution Coatings Automation Contactors - CWM Line 2 Contactores Compactos CWC0 Contactors - CWM Line Sumary Presentation Accessories Overview 5 Three-Pole Contactors
More informationFUSE BASES NH FUSE BASES 690V 160A 160A
fuse bases NH NH 14 690V NH 16 ACCESSORIES FOR NH 18 CR 690V NH 20 SECTIONABLE NEUTRAL NH BASES 21 BS FUSE SWITCH DISCONNECTORS 690V NH NH Fuse bases for NH fuse links. For mounting on DIN/EN rail or
More informationGeneral technical data: CONTACTOR, AC-3, 11KW/400V, 1NO+1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S0 SCREW TERMINAL. product brand name
Data sheet CONTACTOR, AC-3, 11KW/400V, 1NO+1NC, AC110V 50HZ, 120V 60HZ 3-POLE, SZ S0 SCREW TERMINAL product brand name Product designation SIRIUS 3RT2 contactor General technical data: Size of contactor
More informationBenefits, typical uses
R-HA26-013. eps Switchgear Type 8BT1, up to 24kV,Air-Insulated Contents Application Page Application Benefits 2 Typical uses 2 and 3 Technical Data Ratings 4 Classification, dimensions, 5 room planning
More information25A 25A 32A 40A 40A 63A 63A 80A
ISDC Compact Range 25A - 200A Control Panel Isolation Equipment Craig & Derricott has ranges of Switch-Disconnectors, Fuse Combination Units and Changeover Isolators for panel mounting ranging from 25A
More informationCylindrical fuse-link
ylindrical fuse-link Technical data Rated voltage Rated current Rated frequency Rated breaking capacity haracteristics Body material 00 V A, 500 V A, 90 V A H 8-5 A/00 V H 0,5- A/500 V, 0-3 A/00 V H -5
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationBETA Fuses and Fuse Systems
Introduction Overview Application LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in the switchboards of power supply companies. Fuses
More information3VU13, 3VU16 Circuit-Breakers
3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used
More informationApprovals UL 508; CSA-C22.2 No ; IEC/EN ; CE marking
MainswitchRearmounting Partno. T0-2-1/V/SVB-SW Articleno. 045992 Front IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More informationStrip type fuse-switch-disconnectors
Strip type fuse-switch-disconnectors NV Strip type fuse-switch-disconnector sizes 00, 1, 2, Characteristics of the NV Strip type fuse-switch-disconnectors The NV Strip type fuse-switch-disconnectors are
More informationCOMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More informationSolenoid interlocks AZM 161 range Schmersal. a 5,5. Pg11/M16x1,5
.1 AZM 11 range Features Thermoplastic enclosure Manual and emergency release Long life Double insulated X High holding force, N N latching force Wiring compartment Actuation on de-energisation or energisation
More informationApprovals UL 508; CSA-C22.2 No ; CSA-C22.2 No. 94; IEC/EN ; CE marking
MainswitchSurfacemounting Partno. P1-25/I2/SVB-SW Articleno. 207294 IP65 Deliveryprogramme Product range Switch-disconnectors Basic function Main switches Maintenance switches Manual override switches
More information