Thermal-Magnetic Circuit Breaker 201/-WA

Size: px
Start display at page:

Download "Thermal-Magnetic Circuit Breaker 201/-WA"

Transcription

1 Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring a narrow profile housing, recessed terminals, standard EN rail mounting, and precision CBE performance. Approved to CBE standard EN (IEC 60934). Typical applications Process control systems, instrumentation, rail vehicles. Ordering information Type No. 0 single pole, rail mounted version 0-WA low-resistance version Option 705 fitted with adapter X Current ratings A (type 0) A (type 0-WA) A ordering example The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. Standard current ratings and typical internal resistance values Current Internal resistance (Ω) Current Internal resistance (Ω) rating (A) 0 0-WA rating (A) 0 0-WA < < < 0.0 < < 0.0 < < < < < Approvals Authority Voltage ratings Current ratings VDE (EN ) AC 40 V; DC 65 V A CSA, UL AC 50 V; DC 80 V A UL DC 65 V A Technical data WA-... standard type low-resistance type For further details please see chapter: Technical Information Voltage rating AC 40 V (50/60 Hz); DC 65 V (UL: AC 50 V; DC 80 V) Current rating range 0: A 0-WA: A Typical life 5,000 operations at x I N, inductive 5,000 operations at x I N, resistive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn 0 0-WA A A self-limiting... A A 00 A A A 400 A Interrupting capacity (UL 077) I N U N A AC 50 V,000 A A DC 80 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP0 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist, to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 60 g Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 7

2 Thermal-Magnetic Circuit Breaker 0/-WA Dimensions Installation drawing.433 OFF ON ø black white conductor cross section max mm (AWG 0-AWG 8) rigid conductor mm (AWG 0-AWG 0) flexible conductor tightening torque max. 0.8 Nm cable entry operating area (reinforced insulation) cable entry mounting area symmetrical rail EN x7.5 current rating in A slot for fitting labels from Weidmüller type dekafix Phillips screw, size to EN ISO 4757 Internal connection diagram Phoenix type ZBFM5 or ZB8 This is a metric design and millimeter dimensions take precedence ( mm ) inch line The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Typical time/current characteristics Type A AC/DC ) Type A AC/DC ) Type 0-WA A DC/AC ) C F C -30 C +40 F - F ) Magnetic tripping currents are increased by 0% on DC supplies. ) Magnetic tripping currents are decreased by 0% on AC supplies Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

3 Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg Thermal-Magnetic Circuit Breaker 0/-WA Accessories Busbar -pole, 90 X The one metre long busbars can be cut to suitable lengths. Plug-on caps can be fitted on the ends to provide brush contact protection. Imax - busbar 00 A (40 C) Adapter for EN rail G3 specified as a separate item X ±0..8± x.5 = x.49 = Plug-on cap, -pole Y G profile EN G3 Connector bus links -K0 X /.5 mm, (AWG 4) (black) up to 0 A max. load X /.5 mm, (AWG 6) (brown) up to 3 A max. load marking 4 x on busbar Art.-Nr. X5400 EC V/00 A (40 C) Art.-Nr. X5400 EC V/00 A (40 C) Supply terminal Imax 63 A Y Max. tightening torque of terminal screw Nm Max. cable cross section: 5 mm / single strand 6 mm / multistrand with wire end ferrule Adapter X pin lugs to DIN 4630 tinned copper ø ~70 ~ This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 9

4 Thermal-Magnetic Circuit Breaker 0-S.. Description One, two and three pole thermal-magnetic circuit breakers with tripfree mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for panel or plug-in mounting. Available with auxiliary contacts ( x N/O, x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. A choice of characteristic curves further extends the range of applications possibilities for these CBEs. Special auxiliary contact versions for industrial atmosphere and low voltages (e.g. 5 V) available on request. Approved to CBE standard EN (IEC 60934). Suitable for use in distribution rails see section 7. Typical applications Process control equipment, robotics, machine tool control, communications systems, instrumentation, rail vehicles. Special versions, e.g. for aggressive environmental conditions and low voltages (e.g. 5 V) on request. Ordering information Type No. 0 single or multipole thermal-magnetic circuit breaker Mounting S socket or panel mounting Actuator design toggle Number of poles -pole protected -pole protected 3 3-pole protected 5 -pole, protected on one pole only Panel mounting 0 without hardware with M3 thread with 6/3 thread Terminal design (main contacts) P blade terminals (QC.50) Characteristic curve F fast acting: therm..0-.4xi N ;magn.-4xi N DC (DC only) F fast acting: therm..0-.4xi N ; magn xi N AC/ xI N DC M standard delay: therm..0-.4xi N ; magn. 6-xI N AC; xI N DC T delayed: therm..0-.4xi N ; magn. 0-0xI N AC T thermal only,.0-.4xi N M3 standard delay, low resistance: therm..4-.8xi N ; magn. 6-xI N AC; xI N DC Intermediate position H without intermediate position (standard) Z with intermediate position Auxiliary contacts 0 without auxiliary contacts with auxiliary contacts in all poles with auxiliary contacts in pole (only multipole devices) 3 with auxiliary contacts in poles and 3 ( 3-pole devices) Auxiliary contact function (see diagram) one each N/C and N/O (standard) one N/O contact (3/4) 3 one N/C contact (/) Auxiliary contact - terminal design same as main terminals Current ratings A 0 - S 0 - P F - H - 0 A ordering example Remote trip coil available to special order. Technical data 0-S.. For further details please see chapter: Technical Information Voltage rating AC 50 V*; 3 AC 433 V (50-60Hz); DC 65 V (*UL: AC 77 V; DC 65 V) Current rating range A for curves M, T, T A for curves F, F, M3 Auxiliary circuit A, AC 40 V/DC 65 V Typical life 0,000 operations at x I N, inductive Ambient temperature C ( F) T 60 Insulation co-ordination rated impulse pollution (IEC and 60664A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC,500 V aux. circuit -/3-4 AC,000 V pole/pole AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn A 400 A A 800 A curves F, F, M, T: A,500A (at DC 3 V) curve T : A 5 x I N curve M3: 0... A AC 00 A / DC 400 A Interrupting capacity (UL 077) I N A A A A U N AC 50 V AC 5 V AC 50 V DC 65 V -pole,000 A,000 A 3,500 A,000 A -pole,000 A,000 A 3,500 A,000 A 3-pole 3AC 50V 3AC 50V 3AC 6V,000 A,000 A 3,500 A Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP00 Vibration curve F: 3 g ( Hz), ± 0.3 mm (0-57 Hz) curves M, M3, T, T: 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock curve F: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 curves M, M3, T, T: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 to IEC , test Ea Corrosion 96 hours in 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 50 g per pole Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009) -

5 Thermal-Magnetic Circuit Breaker 0-S.. Standard current ratings and typical internal resistance values Dimensions Current Internal resistance (Ω) rating F F M T M3 T (A) fast acting fast acting standard delayed standard delay thermal delay low resistance for DC only for AC + DC for AC + DC nur für AC for AC + DC for AC + DC , , , , Approvals unit III unit II unit I OFF k A M 5 Z ON 6x6.8 = x.68 =.6 A M A M polarizing tooth blade terminals DIN 4644-A (QC.50) mounting thread M3 or 6/3 max. screw length 5.8 mm (.8 in.) tightening torque max. 0.5 Nm ø multipole devices Authority Voltage ratings Current ratings GL, VDE (EN 60934) AC 50 V; DC 65 V; 3 AC 433 V A UL, CSA AC 77 V; DC 65 V; AC 77/480 V A Toggle positions Cut-out dimensions ø pole -pole -pole.5 ø OFF position intermediate position ON position Shock directions Installation drawing 3 operating area (reinforced insulation) s ø recess with panel thickness s >.5 mm (.059 in.) current rating 3 4 k 0 mounting area (standard insulation) - This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009)

6 Thermal-Magnetic Circuit Breaker 0-S.. Internal connection diagrams Typical time/current characteristics with auxiliary contact function (one each N/O and N/C) (...-H-...) without intermediate position (...-Z-...) with intermediate position (Z) 0 I line (Z) line (Z) line 3 0 I 3 0 I (k) (k) (k) OFF position intermediate position ON position 4 -F 0. 6 A DC only F A AC/ DC ) F 8 6 A AC/ DC ) The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Multipole devices: all poles symmetrically loaded. With single pole overload, thermal tripping will be at max..7 x I N with curves F, F, M and T, and at max.. x I N with curve M C +40 F +3 C F -30 C - F ) Magnetic tripping currents are increased by 30% on DC supplies. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009) - 3

7 Thermal-Magnetic Circuit Breaker 0-S.. Typical time/current characteristics The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Multi pole devices: all poles symmetrically loaded. With single pole overload, thermal tripping will be at max..7 x I N with curves F, F, M and T, and at max.. x I N with curve M3. ) Magnetic tripping currents are increased by 30% on DC supplies (curves M, M3, T). -M 0. 6 A AC/DC ) -M 8 3 A AC/DC ) -T 0. 6 A AC only T 8 3 A AC only M A AC/DC ) -M3 6 6 A AC/DC ) T 0. 6 A AC/DC T 8 3 A AC/DC C +40 F +3 C F -30 C - F Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009)

8 Thermal-Magnetic Circuit Breaker 0-S.. Accessories Module 7plus For technical data see section 7 - Power distribution systems slot for fitting labels from Phoenix, Weidmüller, Wieland 7 plus 57.4 Single mounting sockets (with adapter) (up to 6 A max. load) 7-P0-Si 7-P0-Si P70-Si 7-P70-Si-005 (retaining clip Y available on request) 8.5 polarized blade terminal DIN 4644-A (QC.50) slot for fitting labels from Phoenix, Weidmüller depth 0 mm ( in.) P0 0 0 blade terminal DIN 4644 part C profile (xa.8-0.8) (QC x.0).8.0 -P70 0 retaining clip slot for busbar Line Line module G-profile EN G3 symmetrical rail EN x7.5 -way 6-way mounting socket mounting socket 3-P0-Si 63-P0-Si (up to 6 A max. load) (retaining clip Y available on request) right-side terminal block left-side terminal block polarization recess symmetrical rail EN x7.5 adapter X blade terminal DIN 4644 A6.3x0.8 (QC.50), max. 5 A polarized recess.5.49 polarized blade terminals DIN 4644-A (QC.50) x 6.8 = x.68 = retaining clip max. 30 max insulation to VBG4 translucent Phoenix terminal AKG 35 max.cross section 35 mm (AWG ) female connector 6.3 DIN 4647 Ms, max. 5 A cylinder head screw M4x4 ISO07 nickel plated washer A 4.3 DIN 5 nickel plated Bus bar 50 A, 6-way, for type 63-P0-Si socket X blade terminal DIN 4644 A6.3x0.8 (QC.50), max. 5 A insulation to VBG4 translucent busbar max. 50 A female connector 6.3 DIN 4647 Ms, max. 5 A (k) 4 (i) Bus bar 50 A (6-way) for type 7-P0-Si socket X (k) 4 (i) 45.8 G-profile EN G3 busbar max. 50 A Bus bar (0-way) (supplied as a complete package) for type 7 socket (for max. 00 A continuous load), more positions available on request X 57 0 with terminal X 57 0 without terminal.079 female connector M4 Cu rail, tin-plated pressure-relief joint (. mm (.043 in.) thick constriction) Insulating sleeving for bus bar (0-way) Y This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009) - 5

9 ø Thermal-Magnetic Circuit Breaker 0-S.. Accessories Connector bus links -P0 X /.5 mm, (AWG 6), brown (up to 3 A max. load) X /.5 mm, (AWG 4), black (up to 0 A max. load) X /.5 mm, (AWG 4), red (up to 0 A max. load) X /.5 mm, (AWG 4), blue (up to 0 A max. load) 00 quick-connect tabs 6.3 (.50) DIN 4647 tinned brass, insulated Toggle guard for -pole units, black X R For front panel mounting. ~70 ~ R Splash cover (transparent) with fixing plate and screws (IP54) for type 0-S- (-pole) X Splash cover (transparent) with fixing plate and screws (IP54) for type 0-S- (-pole) and type 0-S3- (3-pole) X fixing plate mounting hole ø max. max.079 fixing plate max. 4 max.57 mounting holes ø7 +0, mounting dimensions: M3 - hole dia. 3.5 mm/.38 in ±0..6 ±.004 pole.6 ± ±.004 3pole 5. ±0. 3pole.99 ± This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(6009)

10 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact arrangement to provide high voltage DC capability and high switching performance. Designed for plug-in mounting in distribution rail X0-S0606J (see section 7) or terminal blocks 3-P0-Si-0005 and 63-P0-Si Approved to CBE standard EN (IEC 60934). Typical applications Communications systems, power supplies, process control equipment. Ordering information Type No. 0 thermal-magnetic circuit breaker, toggle operated Mounting S9 socket or panel mounting with M3 thread Terminal design P9 blade terminals, for distribution rails X0-S.. and X0-K.. Characteristic curve M medium delay Style single pole with two chambers (one chamber protected only), break contact Si Current ratings...5 A 0 - S9 - P9 M A ordering example Standard current ratings and typical internal resistance values Current rating (A) < 0.0 5* < 0.0 *80% I N continuous load Internal resistance (Ω) Technical data Voltage rating Current rating range Auxiliary circuit Typical life 0-S9-P9M A AC 50 V; DC 65 V...5 A A, AC 40 V/DC 65 V > 0,000 operations at x I N > 0,000 operations mechanical Ambient temperature -30 C C ( F) Insulation co-ordination rated impulse pollution (IEC and 60664A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main to aux. circuit AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn AC 50 V,000 A cosϕ = 0.8 DC 65 V,000 A L/R = 4 ms Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz); to IEC , test Fc 0 frequency cycles/axis Shock 5 g (ms) directions,, 3, 4, 5 0 g ( ms) direction 6 to IEC , test Ea Corrosion 96 hours in 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 80 g Approvals Authority Voltage ratings Current ratings GL, VDE (EN 60934) AC 50 V; DC 65 V...5 A Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 7

11 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Dimensions Internal connection diagrams line line unit OFF ON I unit (k) OFF position Shock directions 0 I (k) ON position k blade terminals DIN 4644-A (QC.50) mounting thread M3 max. screw length 5.8 mm (.8 in.) tightening torque max. 0.5 Nm operating area (reinforced insulation) unit II unit I 8A Installation drawing Typical time/current characteristics See page -. k mounting area (standard insulation) - 8 This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

12 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact arrangement to provide high voltage DC capability and high switching performance. Designed for plug-in mounting in distribution rail X0-S0606J (see section 7) or terminal blocks 3-P0-Si-0005 and 63-P0-Si Approved to CBE standard EN (IEC 60934). Typical applications Communications systems, power supplies, process control equipment. Ordering information Type No. 0 thermal-magnetic circuit breaker, toggle operated Mounting S9 socket or panel mounting with M3 thread Terminal design P9 blade terminals, for distribution rails X0-S.. and X0-K.. Characteristic curve M medium delay Style single pole with two chambers (protected), break contact Si Current ratings A 0 - S9 - P9 M A ordering example Standard current ratings and typical internal resistance values Current Internal Current Internal rating (A) resistance (Ω) rating (A) resistance (Ω) < * < * < *80 % I N continuous load Approvals Authority Voltage ratings Current ratings GL, VDE (EN 60934) AC 50 V; DC 65 V A Technical data Voltage rating Current rating range Auxiliary circuit Typical life 0-S9-P9M A AC 50 V; DC 65 V A A, AC 40 V/DC 65 V > 0,000 operations at x I N > 0,000 operations mechanical Ambient temperature -30 C C ( F) Insulation co-ordination rated impulse pollution (IEC and 60664A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main to aux. circuit AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn AC 50 V cosϕ = A self-limiting A,000 A DC 65 V L/R = 4 ms A self-limiting A 3,500 A Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz); to IEC , test Fc 0 frequency cycles/axis Shock 5 g (ms) directions,, 3, 4, 5 0 g ( ms) direction 6 to IEC , test Ea Corrosion 96 hours in 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 80 g Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 9

13 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Dimensions Internal connection diagrams unit LINE LINE unit 0 I 0 I OFF ON (k) OFF position Shock directions (k) ON position k blade terminals DIN 4644-A (QC.50) mounting thread M3 max. screw length 5.8 mm (.8 in.) tightening torque max. 0.5 Nm unit II unit I 8A Installation drawing Selective back-up fuses k operating area (reinforced insulation) 5 0 mounting area (standard insulation) Voltage Interrupting Selective to rating capacity NH fuse rating Current rating of 0-S9-PM A 6 A 50 A A 60 V DC 3,500 A 63 A 0 A 80 A 5 A 00 A 5 A 35 A 3 A 50 A 8 A 50 V AC,000 A 63 A 0 A 80 A 5 A 00 A 5 A NH fuse according to VDE 0636, part (IEC 69) NH fuse = low voltage power fuse This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

14 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Typical time/current characteristics A AC C +40 F +3 C F -30 C - F A DC C +40 F +3 C F -30 C - F A AC C +40 F +3 C F -30 C - F 8 5 A DC C +40 F +3 C F -30 C - F The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B -

15 Thermal-Magnetic Circuit Breaker 0-S9-P9M A Accessories Mounting sockets 3-P0-Si V E-T-A Typ 3 Gr. C polarized blade terminals DIN 4644-A (QC.50) (k) P0-Si-0005 terminal coding plug retaining clip Y to special order E-T-A Typ 63 Gr. C 50V terminal (k) polarized blade terminals DIN 4644-A (QC.50) coding plug max. 30 max Distribution rail X0-S06... see section 7. - This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

16 Thermal-Magnetic Circuit Breaker 0-T.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Featuring a combi-foot design for both symmetric and asymmetric rail mounting. Available with auxiliary contact ( x N/O or x N/C) for status signalling. Two and three pole models are internally linked to ensure that both/all poles trip in the event of an overload on one pole, even if the actuator is held in the ON position. This CBE can be supplied in current ratings up to 3 A with a choice of characteristic curves. All screw terminals are recessed for safety. Approved to CBE standard EN (IEC 60934). Typical applications Process control equipment, robotics, machine tool control, communications systems, instrumentation. -pole 0-T.. 3-pole Ordering information Type No. 0 single and multipole thermal-magnetic circuit breaker Mounting T rail mounting Actuator design toggle Number of poles single pole protected -pole protected 3 3-pole protected 5 -pole, protected on one pole only Accessories 0 without accessories Terminal design (main contacts) K0 screw terminals Characteristic curve F fast acting: therm..0-.4xi N ; magn.-4xi N DC (DC only) F fast acting: therm..0-.4xi N ; magn.3,5-6,5xi N AC/4,5-8,5xI N DC M standard delay: therm..0-.4xi N ; magn. 6-xI N AC, xI N DC T delayed: therm..0-.4xi N ; magn. 0-0xI N AC T thermal only,.0-.4xi N M3 standard delay, low resistance: therm..4-.8xi N ; magn. 6-xI N AC, xI N DC Auxiliary contact design H without intermediate position Auxiliary contacts 0 without auxiliary contacts with auxiliary contacts auxiliary contacts on pole only (multipole devices) 3 auxiliary contacts on pole and 3 (3-pole devices) Auxiliary contact function (see diagrams) N/O contact 3 N/C contact Auxiliary contact - terminal design screw terminals Current ratings A 0 - T 0 - K0 M- H - 0 A ordering example Approvals Authority Voltage ratings Current ratings GL, VDE (EN 60934) 3 AC 433 V; AC 50 V; DC 65 V A UL, CSA 3 AC 480 V; AC 77 V; AC 77/480 V; DC 65 V A Technical data For further details please see chapter: Technical Information Voltage rating AC 50 V; 3 AC 433 V (50/60 Hz); DC 65 V (UL: AC 77/480 V; DC 65 V) Current rating range A for curves M, T, T A for curves F, F, M3 Auxiliary circuit A, AC 40 V / DC 65 V Typical life 3 AC 433 V; AC 50 V: A 0,000 operations at x I N, inductive DC 65 V: A 0,000 operations at x I N, inductive 3 AC 433 V; AC 50 V: 3 A 0,000 operations at x I N, resistive Ambient temperature C ( F) T 60 Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC 3,000 V pole/pole AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn A 400 A A 800 A curves F, F, M, T: A,500 A (at DC 3 V) curve T : A 5 x I N curve M3: 0... A AC 00A /DC 400A Interrupting capacity (UL 077) I N A A - + -pole AC 77 V /5,000 A AC 77 V /,000 A 3-pole 3 AC 480 V /5,000 A 3 AC 480 V /,000 A - + -pole DC 65 V /,000 A DC 65 V /,000 A Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP0 Vibration curve F: 3 g ( Hz), ± 0.3 mm (0-57 Hz) curves M, M3, T, T: 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock curve F: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 curves M, M3, T, T: 5 g ( ms), directions,, 3, 4, 5 0 g ( ms), direction 6 to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 60 g per pole Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(90309) - 3

17 Thermal-Magnetic Circuit Breaker 0-T.. Standard current ratings and typical internal resistance values Current Internal resistance (Ω) rating F F M T M3 T (A) fast acting fast acting standard delayed standard delay thermal delay low resistance for DC only for AC + DC for AC + DC nur für AC for AC + DC for AC + DC , , , , , Dimensions toggles linked for multipole devices Si G-profile EN G OFF ON slot fitting labels from Phoenix Weidmüller Wieland Si symmetric rail EN x7.5 EN x5/ Si-terminal M3 max..5 mm (AWG 6) (rigid conductor) tightening torque 0.5 Nm main contact terminal max. 6 mm (AWG 0) (rigid conductor) tightening torque 0.5 Nm unit III A M.5.49 unit II unit I A A M M Installation drawing operating area (reinforced insulation) Si Si mounting area This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(90309)

18 Thermal-Magnetic Circuit Breaker 0-T.. Internal connection diagrams Typical time/current characteristics...-h3-... OFF position line (Si) 0 I N/C contact ON position line (Si) 0 I -F 0. 6 A DC only (Si) (Si)...-H-... line (Si) N/O contact line (Si) 0 I 3 0 I (Si) (Si) Shock directions F A AC/ DC ) F 8 6 A AC/ DC ) C +40 F +3 C F -30 C - F ) Magnetic tripping currents are increased by 30% on DC supplies. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(90309) - 5

19 Thermal-Magnetic Circuit Breaker 0-T.. Typical time/current characteristics The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Multi pole devices: all poles symmetrically loaded. With single pole overload, thermal tripping will be at max..7 x I N with curves F, F, M and T, and at max.. x I N with curve M3. ) Magnetic tripping currents are increased by 30% on DC supplies. -M 0. 6 A AC/DC ) -M 8 3 A AC/DC ) -T 0. 6 A AC only T 8 3 A AC only M A AC/DC ) -M3 6 6 A AC/DC ) T 0. 6 A AC/DC T 8 3 A AC/DC C +40 F +3 C F -30 C - F Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(90309)

20 Thermal-Magnetic Circuit Breaker 0-T.. Accessories Connector bus links -K0 X /.5 mm, (AWG 4) (black) up to 0 A max. load X /.5 mm, (AWG 6) (brown) up to 3 A max. load Busbar 3-pole Y Imax - busbar 00 A (40 C) 50 pin lugs to DIN 4630 tinned copper ø marking 4 x on busbar L3 L Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg L L L L3 L3 L Art.-Nr. Y IEC V/00 A (40 C) L L L L3 L3 L L L L L L L3 Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg L L3 L L L L3 L L Art.-Nr. Y IEC V/00 A (40 C) L L3 L3 L L L L L3 ~70 ~.76 Busbar -pole, 90 X The one metre long busbars can be cut to suitable lengths. Plug-on caps can be fitted on the ends to provide brush contact protection. Imax - busbar 00 A (40 C) ±0.. 8± ,3±0.4.3± x.5 = x.49 = Plug-on cap, busbar /3-pole Y ±0..8± Busbar -pole Y Imax - busbar 00 A (40 C) 79 x.5 = x.49 = Plug-on cap, -pole Y Supply terminal Y Imax 63 A with -pole busbar, 50 A with multipole busbar Max. tightening torque of terminal screw Nm Max. cable cross section: 5 mm / single strand 6 mm / multistrand with wire end ferrule marking 4 x on busbar Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg Art.-Nr. Y IEC V/00 A (40 C) Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg Art.-Nr. Y IEC V/00 A (40 C) ±0.4.09± x.5 = x.49 = Plug-on cap, -pole Y Busbar -pole Y Imax - busbar 00 A (40 C) marking 4 x on busbar L L Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg L L L L L L Art.-Nr. Y IEC V/00 A (40 C) L L L L L L L L L L L L L L Elektrotechnische Apparate GmbH D-9048 Altdorf bei Nürnberg L L L L L L Art.-Nr. Y IEC V/00 A (40 C) L L L L L L L L Caution: When using multipole busbars please leave at least one pole s width between two adjacent line entry terminals ±0..8± x.5 = x.49 = ,3±0.4.3±.06 Plug-on cap, busbar /3-pole Y This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(90309) - 7

21 Thermal-Magnetic Circuit Breaker 5-L.../G... Description Miniaturised single pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934). Two designs provide the option of either printed circuit board or threadneck panel mounting. A separate shunt tap terminal and auxiliary contacts are available. Fast acting, medium or long delay characteristics can be specified for both models. Suitable for use in distribution rails see section 7. Complies with CBE standard EN (IEC 60935). Typical applications Control equipment, communications systems, instrumentation. Suitable for mounting on Euro cards. 5-L.. 5-G... Ordering information Type No. 5 single pole thermal-magnetic circuit breaker Mounting G threadneck panel mounting L PCB mounting Number of poles -pole protected Mounting hardware 0 without accessories hex nuts /4"-40 UNS-A, serrated washer, location pin (-G only) Terminal design (main contacts) P blade terminals , without shunt terminal B blade terminals , with shunt terminal L solder pins, without shunt terminal M solder pins, with shunt terminal Characteristic curve F fast acting:.0-.4xi N ; magn.-4xi N DC (DC only) M standard delay: therm..0-.4xi N ; magn xI N DC; magn xI N AC T delayed: therm..0-.4xi N ; DC magn. 8-7xI N DC, 6-3xI N AC T3 delayed: therm..0-.4xi N ; magn.3-0xi N DC magn xI N AC Auxiliary contacts S0 without auxiliary contact S with auxiliary contact (change over) Auxiliary contact - terminal design blade terminals 6.3x0.8 (QC.50) solder pins Current ratings A 5 - G - P F - S A ordering example Standard current ratings and typical internal resistance values Current Internal Current Internal ratings (A) resistance (Ω) ratings (A) resistance (Ω) Technical data Voltage rating AC 50 V (50/60 Hz); DC 50 V (UL: AC 50 V; DC 75 V) Current rating range A (higher current ratings to special order) Auxiliary circuit A, AC 50 V/DC 8 V Typical life 0,000 operations at x I N Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength IEC and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn 300 A Interrupting capacity (UL 077) I N U N 0.05 A AC 50 V 00 A A AC 50 V,000 A A AC 50 V,000 A A DC 50 V,000 A A DC 75 V 800 A Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP00 Vibration curve F: curves M, T, T3: 6 g ( Hz), ± 0.46 mm (0-57 Hz) 8 g ( Hz), ± 0.6 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock curves F, M, T, T3: 30 g ( ms), directions,, 3, 4, 5, curve F: 0 g ( ms), direction 6 curves M, T, T3: 5 g ( ms), direction 6 to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 5 g Approvals Authority Voltage ratings Current ratings UL AC 50 V A DC 75 V A CSA AC 50 V; DC 48 V A Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 9

22 I 0 Thermal-Magnetic Circuit Breaker 5-L.../G... Dimensions 5-L.. Installation drawing 5 5 I spacer 4.57 operating area (reinforced insulation) LINE ø A3 x0.8 x LINE mounting area (standard insulation) Dimensions 5-G.. Internal connection diagram 0 0 tightening torque max. Nm 0 I line threadneck /4"-40 UNS-A hex nut serrated washer lock washer ø (3) LINE 4 blade terminals DIN 4644-A (QC.50) front panel cut-out ø Shock directions ø This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

23 Thermal-Magnetic Circuit Breaker 5-L.../G... Typical time/current characteristics The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below.see also section 9 - Technical information A: Ambient temperature F C Derating factor F A DC only -F 8 0 A DC only -M A AC/DC ) M 8 0 A AC/DC ) T A AC/DC ) T 8 0 A AC/DC ) C +40 F +3 C F -30 C - F ) Magnetic tripping currents are increased by 30% on DC supplies (curve M and T). Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 3

24 Thermal-Magnetic Circuit Breaker 5-L.../G... Typical time/current characteristics -T A AC/DC ) T3 8 0 A AC/DC ) C +40 F +3 C F C - F ) Magnetic tripping currents are increased by 30% on DC supplies. - 3 All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

25 Thermal-Magnetic Circuit Breaker 5-F... Description Miniaturised two pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934). Fitted with panel mounting flange and push-on termination, also suitable for mounting on Euro Cards. Available with auxiliary contacts and a choice of fast, medium or long delay characteristics. Complies with CBE standard EN (IEC 60934). Typical applications Control equipment, communications systems, instrumentation. Ordering information Type No. 5 double pole thermal-magnetic circuit breaker Mounting F flange mounting, with M3 mounting thread Number of poles -pole protected 5 -pole, protected on one pole only Accessories 0 without Terminal design (main contacts) P blade terminals 6.3x0.8mm (QC.50) without shunt terminal Characteristic curve F fast acting:.0-.4xi N ; magn.-4xi N DC (DC only) M standard delay: therm..0-.4xi N ; magn xi N DC; magn.3.5-8xi N AC T delayed: therm..0-.4xi N ; magn. 8-7xI N DC; magn. 6-3xI N AC T3 delayed: therm..0-.4xi N ; magn.3-0xi N DC magn xI N AC Auxiliary contacts S0 without auxiliary contacts S with auxiliary contacts (change over) S with auxiliary contact on pole only Auxiliary contact - terminal design blade terminals 6.3x0.8 Current ratings A 5 - F 0 - P F - S A ordering example Standard current ratings and typical internal resistance values Current Internal resistance Current Internal resistance ratings (A) per pole (Ω) ratings (A) per pole (Ω) Technical data Voltage rating Current rating range Auxiliary circuit 5-F... AC 50 V (50/60 Hz); DC 50 V (UL: AC 50 V; DC 75 V) (higher DC voltage to special order) A A, AC 50 V/DC 8 V resistive load Typical life 0,000 operations at x I N Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V pole/pole AC,500 V main/aux. circuit AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity Icn 600 A Degree of protection operating area IP30 (IEC 6059/DIN 40050) terminal area IP00 Vibration curve F: 6 g ( Hz), ± 0.46 mm (0-57 Hz) curves M, T, T3: 8 g ( Hz), ± 0.6 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock curves F, M, T, T3: 30 g ( ms), directions,, 3, 4, 5 curve F: 0 g ( ms), direction 6 curves M, T, T3: 5 g ( ms) direction 6 to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 50 g Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 33

26 Thermal-Magnetic Circuit Breaker 5-F... Dimensions 5-F... Internal connection diagram I I line M3 4 LINE Shock directions 4 blade terminals DIN 4644-A (QC.50) front panel cut-out ø Installation drawing operating area (reinforced insulation) LINE mounting area (standard insulation) - 34 This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

27 Thermal-Magnetic Circuit Breaker 5-F... Typical time/current characteristics The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below.see also section 9 - Technical information A: Ambient temperature F C Derating factor F A DC only -F 8 0 A DC only -M A AC/DC ) M 8 0 A AC/DC ) T A AC/DC ) T 8 0 A AC/DC ) C +40 F +3 C F -30 C - F ) Magnetic tripping currents are increased by 30% on DC supplies (curve M and T). Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 35

28 Thermal-Magnetic Circuit Breaker 5-F... Typical time/current characteristics -T A AC/DC ) T3 8 0 A AC/DC ) C +40 F +3 C F C - F ) Magnetic tripping currents are increased by 30% on DC supplies All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

29 Thermal-Magnetic Circuit Breaker M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 60934). The addition of a magnetic tripping module to the type 30 range described in catalogue section extends the choices available to include single pole with thermal-magnetic protection; double pole switching with thermalmagnetic protection on one pole, thermal protection on the other; double pole switching with thermal-magnetic protection on one pole only. All are offered with rocker switch or push button control - two buttons for ON/OFF or one button press-to-reset only, in designs to suit one of three different panel cut-out sizes. Illumination is optional. Approved to CBE standard EN (IEC 60934). Meets the requirements regarding fire resistance of EN : Safety of household and similar electrical appliances M... Typical applications Motors, machine tools, office equipment, appliances. Standard current ratings and typical internal resistance values Current ratings Internal resistance per pole (Ω) (A) thermal-magn. thermal < 0.0 < < 0.0 < < 0.0 < < 0.0 < 0.0 Illumination voltage / Power consumption Operating voltage Power consumption Y + R G T 6 V ma 3.6 ma 4.9 ma V ma 3.5 ma 4.9 ma 4 V ma 3.5 ma 4.9 ma 48 V ma 3.5 ma 4.9 ma 5 V 0.9 ma.8 ma. ma 30 V 0.9 ma.8 ma. ma Technical data For further details please see chapter: Technical Information Voltage rating Current ratings AC 40 V (50/60 Hz); DC 50 V A Typical life -pole AC 40 V: A 30,000 operations at x I N, inductive DC 50 V: A 30,000 operations at x I N, inductive A 30,000 operations at x I N, resistive DC 8 V: A 30,000 operations at x I N, inductive -pole AC 40 V: A 50,000 operations at x I N, inductive A 30,000 operations at x I N, inductive DC 50 V: A 50,000 operations at x I N, inductive A 0,000 operations at x I N, inductive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V current path/current path AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn 0... A 00 x I N A 50 A -pole 50 A -pole Interrupting capacity (UL 077) I N U N A AC 50 V 00 A A AC 50 V,000 A...4 A AC 5 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) (with water splash protection IP54) terminal area IP00 Vibration 8 g ( Hz) ± 0.6 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 30 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 53 g (-pole) approx. 50 g (-pole) Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609) - 37

30 Thermal-Magnetic Circuit Breaker M-.. Ordering information Type 30 rocker switch/circuit breaker Mounting F snap-in frame Size of frame panel thickness 3 to fit in cut-out 50.5 x.5 mm mm ( in) 5 to fit in cut-out 44.5 x mm - 4 mm ( in) 6 to fit in cut-out 45 x 33.7 mm. -.4 mm ( in) Number of poles -pole, thermal-magnetic protection -pole, thermal-magnetic protection on one pole, thermally protected on the other pole 5 -pole, thermal-magnetic protection on one pole, unprotected on the other pole Mounting frame design collar height mm (.039 in) 3 collar height 9 mm (.354 in) (with safety frame) 4 collar height mm (.079 in) with water splash protection (IP54) (not with -F6 frame) U with water splash protection and actuator guard Terminal configuration P7 blade terminals x mm (QC x.0) (terminals (k), (k),, ) H7 (k), (k): blade terminals x (QC x.0), : terminal screws M3.5, blade terminals x (QC x.0) N7 as P7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) G7 as H7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) Characteristic curve M standard delay, therm x I N ; magn. 4-9 x I N AC Switch style W rocker Switch colour designation OPAQUE TRANSLUCENT (for illuminated versions) 0 black white 0 white 4 red 04 red 5 orange 6 sky blue 9 green Rocker markings A 0 AUS OFF B C D I EIN ON E 0 AUS OFF F I EIN ON X A B C D E F X X = without marking Rocker illumination (optional) G green LED Y yellow LED R red LED T blue LED Illumination voltage range (= operating voltage) V AC/DC 0-4 V AC/DC 0-8 V AC/DC V AC V AC V AC/DC Current ratings A 30 - F 3 - N7 M - W A R 4-0 A rdering example The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. Ordering information Type 30 push button switch/circuit breaker Mounting F snap-in frame Size of frame special frame for fitting splash cover 3 to fit in cut-out 50.5 x.5 mm panel thickness mm Number of poles -pole, thermal-magnetic protection -pole, thermal-magnetic protection on one pole, thermally protected on the other pole 5 -pole, thermal-magnetic protection on one pole, unprotected on the other pole Mounting frame design F frame with two push buttons G frame with one push button Terminal configuration P7 blade terminals x mm (QC x.0) (terminals (k), (k),, ) H7 (k), (k): blade terminals x (QC x.0), : terminal screws M3.5, blade terminals x (QC x.0) N7 as P7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) G7 as H7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) Characteristic curve M standard delay, therm x I N ; magn. 4-9 x I N AC Switch style/colour D push button (reset only) 0X black 04X red X white translucent 9X green translucent S push buttons ON/OFF GRX green translucent/red WRX white translucent/red WBX white translucent/black Push button illumination (optional) G green LED, AC/DC Y yellow LED, AC/DC R red LED, AC/DC Illumination voltage range (= operating voltage) V AC/DC 0-4 V AC/DC 0-8 V AC/DC V AC V AC V AC/DC Current ratings A 30 - F 3 F - N7 M- S GRX G 4-0 A ordering example Approvals Authority Voltage ratings Current ratings VDE (EN 60934) AC 40 V; DC 8 V A DC 50 V A double pole DC 50 V A single pole CSA, UL AC 50 V A AC 5 V A CCC AC 50 V; DC 50 V A All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609)

31 Thermal-Magnetic Circuit Breaker M-.. Dimensions Mounting frame variants Mounting style -F3., with rocker Collar height mm OFF position optional illumination in ON position 54.3 Mounting style F3.3 with rocker collar height 9 mm (.354 in.) Installation drawing When installing the circuit breaker apply pressure on bezel only. operating area flat-head screw M3.5x5 ISO 580 tightening torque max. 0.8 Nm blade terminals DIN 4644-C-Ms-S (QC x.0) flat-head screw M3.5x5 ISO 580 (H7 / G7) tightening torque max.0.8 Nm blade terminal DIN 4644-C-Ms-S (QC x.0) mounting area optional illumination in ON position OFF position Required safety distances for rocker and push button Mounting style F3.4 with rocker collar height mm (.079 in.), with water splash protection Mounting style F3.F- -S- with push buttons Cut-out dimensions Cut-out for mounting style -F3 with rocker and push button max. R max.079 ±0.05 ± min..5 min.098 max. R0.3 max.0 Cut-out for mounting style -F6 with rocker panel thickness max. R.5 max.059 ±0.05 ±.00 A min. min.079 max. R0.3 max.0 0 Mounting style F3.G- -D- with push button optional illumination in ON position OFF position Cut-out for mounting style -F5 with rocker -4 mm in. max. R0.3 max max. R.5 max.059 ±0.05 ± min. min panel thickness dimension A mm inch , mm inch Edges of working parts: ISO For mounting styles -F.., -F5.., -F6.. please see section. This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609) - 39

32 Thermal-Magnetic Circuit Breaker M-.. Internal connection diagrams Accessories therm.-magn. protection on one pole thermally protected on the other pole line therm.-magn. protection on one pole unprotected on the other pole line Insulated cover Y (i) (i) (i) (i) (k) (k) (k) Typical time/current characteristics at +3 C/+73.4 F Spacer for 30-F3... Y / Spacer for 30-F5... Y Single or double pole load 0. A AC/DC ) *.039 sharp-edged without bends * Y suitable for panel thickness < mm (.079 in) * Y suitable for panel thickness < 4 mm (.57 in) Blanking piece in -F3 size mounting frame Y matt finish A AC/DC ) Separate water splash cover, transparent (IP66) for use with -F5.. size mounting frames X ø ø ) Magnetic tripping currents are increased by 5% on DC supplies. The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609)

33 Thermal-Magnetic Circuit Breaker M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 60934). The addition of a magnetic tripping module to the type 30 range described in catalogue section extends the choices available to include single pole with thermalmagnetic protection; double pole switching with thermal-magnetic protection on one pole, thermal protection on the other; double pole switching with thermal-magnetic protection on one pole only. All are offered with rocker switch actuation. Illumination is optional. Approved to CBE standard EN (IEC 60934). Meets the requirements regarding fire resistance of EN : Safety of household and similar electrical appliances. Typical applications 30-F7..-M.. Motors, machine tools, office equipment, appliances. Standard current ratings and typical internal resistance values Current ratings Internal resistance per pole (Ω) (A) thermal-magn. thermal < 0.0 < < 0.0 < < 0.0 < < 0.0 < 0.0 Illumination voltage / Power consumption Operating voltage Power consumption LED 6 V 4.9 ma V 4.9 ma 4 V 4.9 ma 48 V 4.9 ma 5 V. ma 30 V. ma Technical data For further details please see chapter: Technical Information Voltage rating Current ratings AC 40 V, 50/60 Hz; DC 50 V A Typical life -pole AC 40 V: A 30,000 operations at x I N, inductive DC 50 V: A 30,000 operations at x I N, inductive A 30,000 operations at x I N, resistive DC 8 V: A 30,000 operations at x I N, inductive -pole AC 40 V: A 50,000 operations at x I N, inductive A 30,000 operations at x I N, inductive DC 50 V: A 50,000 operations at x I N, inductive A 0,000 operations at x I N, inductive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V current path/current path AC,500 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn 0... A 00 x I N A 50 A -pole 50 A -pole Interrupting capacity (UL 077) I N U N A AC 50 V 00 A A AC 50 V,000 A...4 A AC 5 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) (with water splash protection IP54) terminal area IP00 Vibration 8 g ( Hz) ± 0.6 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 30 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 53 g (-pole) approx. 50 g (-pole) Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609) - 4

34 Thermal-Magnetic Circuit Breaker M-.. Ordering information Type 30 rocker switch/circuit breaker Mounting F snap-in frame Size of frame panel thickness 7 to fit in cut-out 44.5 x mm - 4 mm ( in) Number of poles -pole, thermal-magnetic protection -pole, thermal-magnetic protection on one pole, thermally protected on the other pole 5 -pole, thermal-magnetic protection on one pole, unprotected on the other pole Mounting frame design N new design, grey P snap-on actuator guard grey Q snap-on splash cover grey R new design, black S snap-on actuator guard black T snap-on splash cover black Terminal configuration P7 blade terminals x mm (QC x.0) (terminals (k), (k),, ) H7 (k), (k): blade terminals x (QC x.0), : terminal screws M3.5, blade terminals x (QC x.0) N7 as P7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) G7 as H7, but shunt terminals ((i) and (i)) are blade terminals x (QC x.0) Characteristic curve M standard delay, therm x I N ; magn. 4-9 x I N AC Betätigungselement A Switch style Switch colour designation OPAQUE TRANSLUCENT (for illuminated versions) 0 blue 30 blue 6 sky blue 36 sky blue Rocker markings Q Q permanently raised marking Rocker illumination T LED, blue Illumination voltage range (= operating voltage) V 0-4 V 0-8 V V V V AC/DC Current ratings A 30 - F 7 N - N7 M- A 30 Q T 4-0 A ordering example I 0 Internal connection diagrams therm.-magn. protection on one pole thermally protected on the other pole (i) (k) line (i) (k) Single or double pole load 0. A AC/DC ) therm.-magn. protection on one pole unprotected on the other pole A AC/DC ) (i) (k) Typical time/current characteristics at +3 C/+73.4 F line (i) Approvals Authority Voltage ratings Current ratings VDE (EN 60934) AC 40 V; DC 8 V A DC 50 V A double pole DC 50 V A single pole CSA, UL AC 50 V A AC 5 V A CCC AC 50 V; DC 50 V A ) Magnetic tripping currents are increased by 5% on DC supplies. The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609)

35 Thermal-Magnetic Circuit Breaker M-.. Dimensions Installation drawing Mounting style -F7.N and -F7.R When installing the circuit breaker apply pressure on bezel only ±0..89± operating area 0 LINE (i) (k) LINE (i) (k) blade terminals DIN 4644-C-Ms-S (QC x.0) flat head screw ISO580 M3.5x5-MS tightening torque max. 0.8 Nm Cut-out dimensions mounting area Mounting style -F7.P and -F7.S , , , , blade terminals DIN 4644-C-Ms-S (QC x.0) flat head screw ISO580 M3.5x5-MS tightening torque max. 0.8 Nm LINE (i) (k) Mounting style -F7.Q and -F7.T max. R.5 ±0,05 ±.00 max.059 min. min max. R max.0 Edges of working parts: ISO 375 LINE (i) (k) blade terminals DIN 4644-C-Ms-S (QC x.0) flat head screw ISO580 M3.5x5-MS tightening torque max. 0.8 Nm This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609) - 43

36 Thermal-Magnetic Circuit Breaker M-.. Accessories Insulated cover Y Translucent water splash cover (IP54) X 43 0 Consisting of - Y snap-on frame with actuator guard - Y soft plastic cover Snap-on frame with actuator guard (can be snapped on as switch-on protection or switch-off protection) Y Spacer for 30-F7... Y sharp-edged without bends This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(030609)

37 Thermal-Magnetic Overcurrent Circuit Breaker 300 Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, press-to-reset, snap action mechanism and additional manual release (M-type TM CBE to EN 60934). Designed for plug-in mounting with E-T-A sockets 0 and 6. Approved to CBE standard EN (IEC 60934). Typical applications Control equipment, extra-low voltage wiring systems and components. Ordering information Type No. 300 plug-in Current ratings A A ordering example Standard current ratings and typical internal resistances Current Internal Current Internal rating (A) resistance (Ω) rating (A) resistance (Ω) < < < < < < < < < 0.0 Approvals Authority Voltage ratings Current ratings VDE (EN 60934) AC 40 V; DC 8 V A CSA AC 50 V; DC 8 V A Technical data For further details please see chapter: Technical Information Voltage rating Current ratings Typical life AC 40 V, 50/60 Hz; DC 8 V A 500 operations at x I N, inductive 4,000 operations at x I N, resistive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V double insulation Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn A self-limiting... A 00 A A 400 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 50 g Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 45

38 Thermal-Magnetic Overcurrent Circuit Breaker 300 Dimensions Internal connection diagram 5.5 OFF ON ø current rating in A.69 ø3.5 line Installation drawing operating area (reinforced insulation) This is a metric design and millimeter dimensions take precedence ( mm ) inch The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Typical time/current characteristics A AC/DC ) A AC/DC ) A AC/DC ) C +40 F +3 C F C - F ) Magnetic tripping currents are increased by 0% on DC supplies. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

39 Thermal-Magnetic Overcurrent Circuit Breaker 300 Accessories Sockets 0R-K wire cross sectional areas x max..5 mm (AWG 4) stranded x max. 4 mm (AWG ) solid R-A0 blade terminal DIN 4644-A (QC.50) R-P blade terminal DIN 4644-A (QC.50) 8.35 Blanking plug Y for sockets 0R-P0/K0/A ø Terminal for mounting rack (DIN/EN G3) X for sockets 0R M5 x Connector bus links -K0 X /.5 mm, (AWG 4) (black) up to 0 A max. load X /.5 mm, (AWG 6) (brown) up to 3 A max. load for sockets 0R-P0, 0R-A0 and pin lugs to DIN 4630 tinned copper ø wire cross sectional areas x max..5 mm (AWG 4) stranded x max. 4 mm (AWG ) solid Bus bars for sockets 0 (up to 0 A max. load) Y , -way Y , 4-way Socket 6 (up to 6 A max. load) symmetrical rail EN x thickness = 0.8 mm.03 in sockets individually (de)mountable Adapter for socket 6 X for track mounting to EN G3 (G profile) on request ~70 ~.76 Connector bus links -P0 X /.5 mm, (AWG 6) (brown) up to 3 A max. load X /.5 mm, (AWG 4) (black) up to 0 A max. load X /.5 mm, (AWG 4) (red) up to 0 A max. load X /.5 mm, (AWG 4) (blue) up to 0 A max. load for sockets 0R-P0, 0R-A0 00 quick-connect tabs 6.3 (.50) DIN 4647 tinned brass, insulated ~70 ~.76 This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 47

40 Thermal-Magnetic Circuit Breakers 3300/3400 Description Single pole thermal-magnetic circuit breakers with tease-free, trip-free, press-to-reset, snap action mechanism (R-type TM CBE to EN 60934; M-type with manual release (-H). Available with fast acting and standard magnetic tripping characteristics - types 3300 and both with threadneck panel mounting. Options include auxiliary contacts, a separate shunt tap terminal (-A3), and pull-to-trip manual release (-H). Approved to CBE standard EN (IEC 60934). Typical applications Control systems, instrumentation, medical equipment, machine tools, robotics fast acting standard delay Ordering information Type No fast acting 3400 standard delay Mounting ig moulded threadneck Mx (bulk-shipped), not with -H;... leave blank for metal threadneck, required for -H Terminal design P0 blade terminals (QC.50) K0 screw terminals M3.5x5.5 with clamp (not for -Si and -A3) Shunt terminal (optional) A3 same as main terminals, up to I N =7 A max. load 5 A Manual release (optional) H manual release facility (pull), without reinforced insulation in operating area, for Mx metal threadneck only. Metal threadneck version for -H is not approved. Auxiliary contacts (optional) Si with silver-plated solder terminals (N/O and N/C) Push button marking (optional) without Current ratings A ig - P Si A ordering example, without manual release and with moulded threadneck P H - Si A ordering example, with manual release and metal threadneck The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. Standard current ratings and typical internal resistance values Current Internal resistance (Ω) Current Internal resistance (Ω) ratings (A) ratings (A) Technical data For further details please see chapter: Technical Information Voltage rating AC 40 V, 50/60 Hz; DC 65 V (UL: AC 50 V; DC 80 V) Current ratings A Auxiliary circuit A, AC 40 V / DC 65 V Typical life with -H: 5,000 operations at x I N, inductive 5,000 operations at x I N, resistive without -H: A 5,000 operations at x I N, inductive > 8 A,500 operations at x I N, inductive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree operating area.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V double insulation main circuit/aux. circuit AC,500 V aux. circuit 4-5/6-7 AC 840 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn A self-limiting... A 00 A A 400 A Interrupting capacity I N U N (UL 077) A AC 50 V,000 A A DC 80 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH, to IEC , test Cab Mass 3300: approx. 55 g 3400: approx. 50 g Approvals Authority Voltage ratings Current ratings VDE (EN 60934) AC 40 V; DC 65 V A CSA, UL AC 50 V; DC 80 V A UL: only type 3400 DC 65 V A Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 49

41 Thermal-Magnetic Circuit Breakers 3300/3400 Dimensions Internal connection diagrams -ig-p0 OFF ON ø6.4.5 Mx tightening torque max..5 Nm line line (from I N =8 A) 50.3 (-ig) 5.3 (-H).98 (-ig).06 (-H) with shunt terminal (-A3) and auxiliary contacts (-Si) blade terminals DIN 4644-A (QC.50).57 mounting hole Terminal design -P0-A3 SW OFF ON.78 current rating in A ø H ø Mx P0-Si K ± ±.008 mounting holes M3.5x5.5 ISO 07 tightening torque max. 0.8 Nm ø ø Installation drawing operating area (reinforced insulation) 3.8 max..5 max (max. mm/.079 in. when fitted with water splash cover) mounting area.8-50 This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

42 Thermal-Magnetic Circuit Breakers 3300/3400 Typical time/current characteristics Type A AC/DC ) C +40 F +3 C F -30 C - F Type A AC/DC ) C +40 F +3 C F -30 C - F Type A AC/DC ) Type A AC/DC ) C +40 F +3 C F -30 C - F C +40 F +3 C F -30 C - F ) Magnetic tripping currents are increased by 0% on DC supplies ) Magnetic tripping currents are increased by 0% on DC supplies. Accessories For push buttons with M moulded threadneck (-ig) (not with manual release -H) Hex nut with splash cover Water splash cover, X black (IP64) transparent with knurled nut X transparent, X (IP64) with O-ring (IP66 and IP67) The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Mx Mx All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 5

43 Thermal-Magnetic Circuit Breakers 3500/4000 Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring a flange for panel mounting, and optional auxiliary contacts and unprotected shunt tap terminal. Type 4000 offers lower internal resistance values and is fitted as standard with auxiliary contacts and an intermediate reset position in which all contacts are isolated. Approved to CBE standard EN (IEC 60934). Typical applications Control systems, instrumentation, medical equipment, machine tools, robotics, communications systems standard type low-resistance type Ordering information Type No standard version 4000 low resistance version Mounting (optional) F flange with additional M3 insertion nuts Terminal design P0 blade terminals (QC.50), tinned K0 screw terminals M3.5x5.5 with clamp (not with -Si or type 4000) Shunt terminal (optional) A3 same as main terminals (up to I N = 7 A, max. load 5 A) Auxiliary contacts (optional with type 3500) Si auxiliary contacts, silver plated terminals one each N/O and N/C ZR-Si auxiliary contacts with intermediate position (standard with type 4000) Current ratings A (type 3500) A (type 4000) P0 - A3 - Si - 0 A ordering example The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. Standard current ratings and typical internal resistance values Current Internal resistance (Ω) Current Internal resistance (Ω) ratings (A) ratings (A) Technical data For further details please see chapter: Technical Information Voltage rating AC 40 V, 50/60 Hz; DC 65 V (UL: AC 50 V; DC 80 V) Current rating range 3500: A 4000: A Auxiliary circuit A, AC 40 V / DC 65 V Typical life 5,000 operations at x I N, inductive 5,000 operations at x I N, resistive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC,500 V aux. circuit 4-5/6-7 AC 840 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I cn A A self-limiting... A A 00 A A A 400 A Interrupting capacity I N U N (UL 077) A AC 50 V,000 A type 3500: A DC 80 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 40 g Approvals Authority Voltage ratings Current ratings 3500: VDE (EN 60934) AC 40 V; DC 65 V A CSA, UL AC 50 V; DC 80 V A UL DC 65 V A 4000: VDE (EN 60934) AC 40 V; DC 65 V A CSA AC 50 V; DC 80 V A Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 53

44 Thermal-Magnetic Circuit Breakers 3500/4000 Dimensions Internal connection diagrams Version -P0 5.5 OFF ON ø line with shunt terminal (-A3) and auxiliary contacts (-Si) line (from I N =8 A).433 Switching position with intermediate position and auxiliary contacts (-ZR-Si) current rating in A blade terminals.97 DIN 4644-A (QC.50).4 M3 insertion nuts 0 (-F).787 line 5 7 line 5 7 line (from I N =8 A) 3 (from I N =8 A) 3 (from I N =8 A) ø OFF position intermediate position ON position Installation drawing Terminal design operating area (reinforced insulation) -P0-A3 3 -P0-Si max..5 max.098 -P0-A3-Si mounting area 46 -K M3.5x5.5 ISO 07 tightening torque max. 0.8 Nm - 54 This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

45 Thermal-Magnetic Circuit Breakers 3500/4000 Typical time/current characteristics A AC ) A AC ) A DC ) C +40 F +3 C F -30 C - F 0.00 ) Magnetic tripping currents are increased by 0% on DC supplies. ) Magnetic tripping currents are decreased by 0% on AC supplies The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 55

46 Thermal-Magnetic Circuit Breakers 3500/4000 Special version Single pole thermal-magnetic overcurrent circuit breaker with slow magnetic trip curve, suitable for high inrush currents (up to x I N ). Suffix -00 is also available for types 3400 and Enquire for further details. Typical applications Industrial control systems, telecommunications, etc. Standard current ratings and typical internal resistance values Current Internal Current Internal rating (A) resistance (Ω) rating (A) resistance (Ω) Special version Single pole thermal-magnetic circuit breaker suitable for high ambient temperatures. The special rating of the circuit breaker allows resetting at no load in ambient temperatures up to +80 C. Suffix -350 is also available for types 3400 and Enquire for further details. Typical applications Industrial control systems. Standard current ratings and typical internal resistance values Current Internal Current Internal rating (A) resistance (Ω) rating (A) resistance (Ω) Typical time/current characteristics at +3 C Typical time/current characteristics AC/DC ) AC/DC ) +80 C +76 F +3 C F ) Magnetic tripping currents are increased by 0% on DC supplies. ) Magnetic tripping currents are increased by 0% on DC supplies Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

47 Thermal-Magnetic Circuit Breakers 3600/3900 Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Designed for plug-in mounting with E-T-A sockets 7-P0-Si, 3-P0-Si, 63-P0-Si; or panel mounting using E-T-A clips. Featuring an unprotected shunt tap terminal and optional auxiliary contacts. Type 3900 offers lower internal resistance values and is fitted as standard with auxiliary contacts and an intermediate reset position in which all contacts are isolated. Approved to CBE standard EN (IEC 60934). Typical applications Process control systems, instrumentation, communications systems, rail vehicles. Ordering information Type No standard version with shunt tap terminal low-resistance version Terminal design P0 blade terminals (QC.50) Auxiliary contacts (3900: intermediate position as standard) Si with blade terminals ,one each NO/NC, Si60 special auxiliary contact (only 3900) NO, closed in the intermediate and ON position ZR-Si auxiliary contacts with intermediate position (only 3600) ZR-Si60 special auxiliary contact (only 3600) NO, closed in the intermediate and ON position Si3-R special auxiliary contacts, NC contacts with reset button (not approved) Current ratings A (type 3600) A (type 3900) P0 - Si - 0 A ordering example The exact part number required can be built up from the table of choices shown above. Ordering references for optional features should be omitted if not required. Standard current ratings and typical internal resistance values Current Internal resistance (Ω) Current Internal resistance (Ω) rating (A) rating (A) Technical data standard type low-resistance type For further details please see chapter: Technical Information Voltage rating AC 40 V, 50/60 Hz; DC 65 V (UL: AC 50 V; DC 65 V) Current rating range 3600: A 3900: A Auxiliary circuit A, AC 40 V / DC 65 V Typical life 5,000 operations at x I N, inductive 5,000 operations at x I N, resistive Ambient temperature C ( F) Insulation co-ordination rated impulse pollution (IEC and A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC and 60664A) test voltage operating area AC 3,000 V main/aux. circuit AC,500 V aux. circuit 4-5/6-7 AC 840 V Insulation resistance >00 MΩ (DC 500 V) Interrupting capacity I cn A A self-limiting... A A 00 A A A 400 A Interrupting capacity I N U N (UL 077) A AC 50 V,000 A type 3600: A DC 80 V,000 A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g ( Hz), ± 0.38 mm (0-57 Hz) to IEC , test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC , test Ea Corrosion 96 hours at 5 % salt mist to IEC , test Ka Humidity 40 hours at 95 % RH to IEC , test Cab Mass approx. 45 g Approvals Authority Voltage ratings Current ratings 3600: VDE (EN 60934) AC 40 V; DC 65 V A CSA/UL AC 50 V; DC 80 V A UL DC 65 V A 3900: VDE (EN 60934) AC 40 V; DC 65 V A Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 57

48 Thermal-Magnetic Circuit Breakers 3600/3900 Dimensions Internal connection diagrams -P0-Si OFF ON.97 ø ø ø ø line 3 with shunt terminal (standard) and auxiliary contacts (-Si) only 3600 line (from I N =8 A) 3 (from I N =8 A) -Si3-R -Si60 -ZR-Si60 -ZR-Si OFF ON.97 0 current rating in A ø ø ø4.57 ø x 6.8 = x.68 = operating area (reinforced insulation) x 6.8 = x.68 = blade terminals DIN 4644-A (QC.50) Switching position with auxiliary contacts and reset button (-Si3-R) OFF position intermediate position ON position line 5 7 line 5 7 line (from I N =8 A) 3 (from I N =8 A) 3 (from I N =8 A) Switching position with special auxiliary contact (-Si60, -ZR-Si60) OFF position intermediate position ON position line 7 line 7 line (from I N =8 A) 3 (from I N =8 A) 3 (from I N =8 A) 0 current rating in A blade terminals DIN 4644-A (QC.50) OFF position intermediate position ON position line 5 7 line 5 7 line Switching position with intermediate position and auxiliary contacts (3600: -ZR-Si, 3900: -Si) (from I N =8 A) 3 (from I N =8 A) 3 (from I N =8 A) Intermediate position: Holding down reset button and actuating manual release simultaneously. Installation drawing Terminal design -P mounting area.5.49 This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

49 Thermal-Magnetic Circuit Breakers 3600/3900 Typical time/current characteristics A AC ) A AC ) A DC ) C +40 F +3 C F -30 C - F 0.00 ) Magnetic tripping currents are increased by 0% on DC supplies. ) Magnetic tripping currents are decreased by 0% on AC supplies The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F C Derating factor Accessories Module 7plus Modular power distribution system for circuit breakers 0-S, 3600 or For technical details see product group 7. Power-D-Box with sockets pre-wired 9BGT U for 8, 4 or 30 circuits. For technical data see product group 7. Power-D-Box with sockets accommodating up to 30 E-T-A thermal-magnetic circuit breakers type 3600-P0-Si or 3900-P0-Si. For technical data see product group 7. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B - 59

50 Thermal-Magnetic Circuit Breakers 3600/3900 Accessories Sockets 7-P0-Si 7-P0-Si-005 (up to 6 A max. load) mounted with adapter Retaining clip Y to special order slot fitting labels from Phoenix, Weidmüller polarization recess polarization recess 6.3 depth.48 0 mm ( in.) (k) 4 (i).8 depth.0 0 mm ( in.) (k) 4 (i) symmetrical rail EN x7.5 adapter X P0 -P polarized blade terminal DIN 4644-A (QC.50) blade terminal DIN 4644 part C profile (xa.8-0.8) (QC x.0) symmetrical rail EN x7.5 adapter X retaining clip Sockets 7-P70-Si 7-P70-Si-005 (up to 6 A max. load) mounted with adapter Retaining clip Y to special order. slot fitting labels from Phoenix, Weidmüller (k) 4 (i) G-profile EN G3 retaining clip (k) 4 (i) G-profile EN G3 Bus bar (0-way) (supplied as a complete package) for socket 7 (for max. 00 A continuous load) X 57 0 with terminal X 57 0 without terminal (more positions available on request) Phoenix terminal AKG 35 max.cross section 35 mm (AWG ) 7.76 Insulate sleeving for bus bar Y Connector bus links -P0 X /.5 mm (AWG 6), brown up to 3 A max. load X /.5 mm (AWG 4), black up to 0 A max. load X /.5 mm (AWG 4), red up to 0 A max. load X /.5 mm (AWG 4), blue up to 0 A max. load 00 quick-connect tabs 6.3 (.50) DIN 4647 tinned brass, insulated ~70 ~.76 cylinder head screw M4x4 ISO07 nickel plated.079 M4 washer A 4.3 DIN 5 nickel plated female connector Cu rail, tin-plated 0 pressure-relief joint (. mm (.043 in.) thick constriction) Sockets 3-P0-Si 63-P0-Si (up to 6 A max. load) Retaining clip Y to special order. Extraction tool Y polarized recess polarized blade terminals DIN 4644-A (QC.50) x 6.8 = x.68 = retaining clip max. 30 max Mounting clip Y ( pcs needed per unit) Installation drawing with mounting clips Y This is a metric design and millimeter dimensions take precedence ( mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted M Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B

51 Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC (6kA) and UL 077 (5 ka). With toggle actuation, positively trip-free mechanism, a choice of characteristic curves and a wide range of current ratings in finely graded steps from 0. A through 3 A. Auxiliary contacts (make or break contacts) are optionally available. Track-mountable design, width only.5 mm. Ease of wiring by means of an integral busbar concept: line entry busbar LINE+ and signal busbars/signal jumpers. NEW Typical applications Protection of power supplies, equipment and cables in centralised control systems and in decentralised installations serving automation, petro-chemical, power plant, steel industry and similar industrial applications. Ordering Information Type number 40 thermal-magnetic high performance circuit breaker Mounting T track-mounting Number of poles single pole double pole 3 three pole Additional feature 0 without actuator guard with actuator guard Main terminals K0 screw terminals 6 mm / 0 mm Characteristic curve F thermal-magnetic, extremely fast, DC F thermal-magnetic, fast, AC/DC M thermal-magnetic, medium delay, AC/DC T thermal-magnetic, long delay, AC/DC Auxiliary contacts H0 without H with auxiliary contacts in all poles H with auxiliary contacts only in pole (-pole plus) H3 with auxiliary contacts only in poles +3 (3-pole plus) H4 with auxiliary contacts only in pole (3-pole plus) H5 with auxiliary contacts only in the last pole H6 with auxiliary contacts only in poles + (3-pole plus) Auxiliary contact function 0 without make contact (N/O) 3 break contact (N/C) A pole make contact, all other poles break contacts (-pole plus) B poles + make contacts, other poles break contacts (3-pole plus) C pole break contact, other poles make contacts (-pole plus) Auxiliary contacts terminal design 0 without screw terminals mm Voltage rating A AC 77 V or DC 60 V Current rating range A Approval logo V UL T 0 - K0 M- H - A - 0 A -V ordering example single pole Technical data 40-T... three pole For further details please see catalogue section: Technical Information Voltage rating 3 AC 45 V; 3 AC 480 V; AC 77 V; AC 40 V; AC 0 V; DC 60 V Current rating range A Auxiliary circuit DC 0-30 V, ma Typical life IEC AC 45 V,000 cycles at x I N, inductive load AC 40 V: 6,000 cycles at x I N, inductive load DC 60 V: 6,000 cycles at x I N, resistive load UL 489 AC 0 V: 6,000 cycles at x I N, inductive load UL AC 45 V 3,000 cycles at x I N, inductive load AC 77 V: 6,000 cycles at x I N, inductive load DC 60 V: 6,000 cycles at x I N, resistive load Ambient temperature C ( F, T60) Storage temperature C ( F) Insulation co-ordination IEC 60664,5 kv / re-inforced insulation in the operating area Dielectric strength IEC operating area test voltage AC 3,000 V (reinforced insulation) pole to pole test voltage AC,500 V main circuit to auxiliary circuit test voltage AC,500 V open main circuit test voltage AC,500 V open auxiliary circuit test voltage AC 50 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I nc PC AC 40 V, 6,000 A IEC DC 60 V, 6,000 A Interrupting capacity UL 489 AC 0 V, 5,000 A Interrupting capacity AC 77 V, 5,000 A UL 077 DC 60 V, 5,000 A Protection class operating area IP30 (IEC 6059) terminal area IP00 Vibration (sinusoidal) ± 0.38 mm (0-57 Hz), 5 g ( Hz) test to IEC , test Fc, 0 frequency cycles/axis Shock 5 g ( ms) test to IEC , test Ea Corrosion 96 hrs in 5% salt mist, test to IEC ,test Ka Humidity 40 hrs in 95% RH, to IEC , test Cab Housing material moulded material Mounting on symmetrical rail to EN x7.5 Mounting dimension (w x h x d).5 x 89.3 x 87. Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(00409) - 6

52 Thermal-Magnetic Circuit Breaker 40-T... Technical data Dimensions LINE terminal (LINE and/or DC+) screw terminals M5 max. cable cross section flexible with wire end ferrule w/wo plastic sleeve 6 mm² multi-lead connection ( identical cables) flexible with wire end ferrule without plastic sleeve 6 mm² flexible with TWIN wire end ferrule with plastic sleeve mm² wire stripping length 4 mm tightening torque.5 3 Nm LOAD terminal screw terminals M4 max. cable cross section flexible with wire end ferrule w/wo plastic sleeve mm multi-lead connection ( identical cables) flexible with wire end ferrule without plastic sleeve mm² flexible with TWIN wire end ferrule with plastic sleeve mm² wire stripping length 0 mm tightening torque..4 Nm Auxiliary contact terminals screw terminals M max. cable cross section flexible with wire end ferrule w/wo plastic sleeve mm² multi-lead connection ( identical cables) flexible with wire end ferrule without plastic sleeve mm² wire stripping length 6 mm tightening torque Nm Mass approx. 90 g per pole with aux. contact label see accessories OFF ON snap-in socket for symmetrical rail EN x7,5 Installation drawing allowable mounting position: vertical operating area (reinforced insulation) mounting area (standard insulation) protection against brush contact: remove slide from the bottom of the device unit I unit II unit III auxiliary contact terminal M max..5 mm nx slot for signal busbar main contact terminal M4 max. 0 mm Current ratings and typical internal resistance values Current Internal resistance per pole (Ω) rating trip curve F trip curve F trip curve M trip curve T (A) fast fast medium delay long delay DC only AC + DC AC + DC AC + DC , , Internal connection diagrams...-h-... OFF position line (Si) 0 I 3...-H3-... OFF position line (Si) 0 I Si make contact (N/O) Si break contact (N/C) movable snap-in hook ON position line (Si) 0 I (Si) (Si) ON position line (Si) 0 I (Si) (Si) - 6 This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(00409)

53 Thermal-Magnetic Circuit Breaker 40-T... Termination examples Accessories 40-T with busbars and signal busbars (auxiliary contacts connected in parallel) busbars signal busbars (parallel connection) insert slide for protection, against brush contract on breaker side Description Part number busbar red, 500 mm length, X 6 0 can be cut to length busbar grey, 500 mm length, X 6 0 can be cut to length signal busbar blue, 500 mm length, X can be cut to length signal busbar red, 500 mm length, X can be cut to length signal busbar grey, 500 mm length, X can be cut to length signal busbar grey X (packing unit 5 pcs) Label (packing unit 50 pcs) X or from Phoenix ZBF 40-T with busbars and jumpers (auxiliary contacts connected in parallel) busbars jumpers (parallel connection) insert slide for protection against brush contract on breaker side busbar X 6 0 / red, 500 mm length, can be cut to length X 6 0 / grey, 500 mm length, can be cut to length r signal busbar X / blue, 500 mm length, can be cut to length X / red, 500 mm length, can be cut to length r X / grey, 500 mm length, can be cut to length or jumper X grey protection against brush contact: remove slide from the bottom of the device label X or from Phoenix ZBF 40-T with busbars and signal busbars (auxiliary contacts connected in serie) busbars jumpers (series connection shifted by in relation to the opposite side) insert slide for protection against brush contract on breaker side signal busbar X / blue, 500 mm length, can be cut to length X / red, 500 mm length, can be cut to length X / grey, 500 mm length, can be cut to length or jumper X grey push in busbars and slide for protection against brush contact to be flush with housing sides Busbars, signal busbars and jumpers: see accessories push up signal busbars and jumpers against housing This is a metric design and millimeter dimensions take precedence ( mm ) inch Courtesy of Steven Engineering, Inc.-30 Ryan Way, South San Francisco, CA Main Office: (650) Outside Local Area: (800) Issue B(00409) - 63

Thermal-Magnetic Circuit Breaker 2210-S291-P9M A

Thermal-Magnetic Circuit Breaker 2210-S291-P9M A Thermal-Magnetic Circuit Breaker 0-S9-P9M-40033-...A Description Single pole thermal-magnetic circuit breaker with trip-free mechanism and toggle actuation. Two-chamber construction with cascade contact

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics

More information

Magnetic Overcurrent Circuit Breaker

Magnetic Overcurrent Circuit Breaker Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically

More information

High Performance Thermal-Magnetic Circuit Breakers 410/520/

High Performance Thermal-Magnetic Circuit Breakers 410/520/ High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism

More information

Thermal-Magnetic Circuit Breaker M1-...

Thermal-Magnetic Circuit Breaker M1-... Thermal-Magnetic Circuit Breaker 320-...-M-... Description Two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 6034). The addition of a magnetic tripping

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker -F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 694 with trip free mechanism) offering the choice of single

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Magnetic and Hydraulic-Magnetic Circuit Breaker 845-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-freemechanism and toggle actuation. A choice of switching characteristics

More information

Thermal-Magnetic Circuit Breaker M1-..

Thermal-Magnetic Circuit Breaker M1-.. Thermal-Magnetic Circuit Breaker 30-...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic

More information

Electronic Circuit Breaker ESS20-0..

Electronic Circuit Breaker ESS20-0.. Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Magnetic and Hydraulic-Magnetic Circuit Breaker 835-... Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of single pole, double pole with single pole protection,

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 0-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

High Performance Thermal Circuit Breaker

High Performance Thermal Circuit Breaker High Performance Thermal Circuit Breaker 43-... Description Single pole high performance thermal circuit breaker with tease-free, trip-free, snap action mechanism and push/pull on/off manual actuation

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available

More information

Thermal Overcurrent Circuit Breaker 3130

Thermal Overcurrent Circuit Breaker 3130 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available either with protection on one/both/all

More information

Thermal Overcurrent Circuit Breaker 3120-F...

Thermal Overcurrent Circuit Breaker 3120-F... Thermal Overcurrent Circuit Breaker 20-F... Description An extremely versatile range of rocker switch/thermal circuit breakers (Stype TO CBE to EN 6094 with trip free mechanism) offering the choice of

More information

Electronic Circuit Breaker ESS20

Electronic Circuit Breaker ESS20 Electronic Circuit Breaker ESS20 Description Electronic circuit breaker type ESS20 is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 24 V switch-mode

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and ON/OFF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours and legends, with optional illumination.

More information

Thermal Circuit Breaker 3120-F...

Thermal Circuit Breaker 3120-F... Description The 320 circuit breaker/switch combination is an ON/OFF switch with integral overcurrent protection (S-type TO CBE to EN/IEC 60934). The trip element is a bimetal. Type 320 is ideally suited

More information

N W. Thermal Circuit Breaker / Switch Series Description. Typical applications Circuit breaker. Technical data

N W. Thermal Circuit Breaker / Switch Series Description. Typical applications Circuit breaker. Technical data Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

Thermal Circuit Breaker / Switch Series 3131

Thermal Circuit Breaker / Switch Series 3131 Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours

More information

Simulator switch, magnetic operation

Simulator switch, magnetic operation Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip

More information

Thermal-magnetic Miniature Circuit Breaker 4230-T...

Thermal-magnetic Miniature Circuit Breaker 4230-T... Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail

More information

Circuit Breakers. DIN rail-mounted equipment protection

Circuit Breakers. DIN rail-mounted equipment protection Phoenix Contact offers a full family of modular components covering virtually all of your industrial electrical and electronic needs as well as a broad range of value-added services. CLIPLINE DIN rail-mount

More information

Thermal-magnetic Miniature Circuit Breaker 4230-T...

Thermal-magnetic Miniature Circuit Breaker 4230-T... Thermal-magnetic Miniature Circuit Breaker 40-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-, UL 1077 and UL 489 for DIN rail

More information

TMC 91H is now TMC 60 C Series

TMC 91H is now TMC 60 C Series TMC 91H is now TMC 60 C Series The new Thermal Magnetic Circuit Breaker is once again available and better than ever! The new version is not only UL recognized with the same electrical performance as the

More information

Electronic circuit breaker EBU10-T

Electronic circuit breaker EBU10-T Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions

More information

TM12 Series CIRCUIT BREAKERS FOR EQUIPMENT. Thermal magnetic release Positively trip-free Reset or manual actuation

TM12 Series CIRCUIT BREAKERS FOR EQUIPMENT. Thermal magnetic release Positively trip-free Reset or manual actuation CIRCUIT BREAKERS FOR EQUIPMENT TM Series Thermal magnetic release Positively trip-free Reset or manual actuation The TM circuit breaker for equipment (CBE) is a single pole, thermal-magnetically operated

More information

Control Circuit Protection

Control Circuit Protection Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC

More information

UMBW-UL489 and UL1077 Listed

UMBW-UL489 and UL1077 Listed -UL489 and UL77 Listed Introducing the New WEG Series Thermal-Magnetic Miniature Breakers. This new offering includes both UL489 and UL77 approvals to provide a solution for circuit & equipment protection

More information

RX 3 MCB 4500 A Phase + Neutral, neutral on left side

RX 3 MCB 4500 A Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489

System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU 200 M is ABB s solution for UL 489 branch

More information

BETA Switching Switches and Light Indicators

BETA Switching Switches and Light Indicators Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET

More information

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail

, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1

More information

Phase + Neutral, neutral on left side

Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1

More information

System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077

System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077 Data Sheet System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077 2CDC021026S0011 2CDC021016S0012 The S 200 PR is a high-performance supplementary protector with

More information

DX³ RCCBs - ID 4P up to 100 A

DX³ RCCBs - ID 4P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

G7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press

G7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms

More information

Door Interlock Switches

Door Interlock Switches HSE Series HSE Series Miniature Solenoid Locking Switches Overview X Series E-Stops HSE features: World s smallest 4 contact solenoid interlock switch. (3 x x 46 mm) Four contacts Gold-plated contacts

More information

RY2L Series Miniature Magnetic Latching Relays. E Release Time. 60N (0 6G); Maximum frequency 55Hz

RY2L Series Miniature Magnetic Latching Relays. E Release Time. 60N (0 6G); Maximum frequency 55Hz Miniature Magnetic Latching Key features of the RY2L series include: Standard ice cube, 14-pin solder lug termination Operates by pulse input and maintains condition even during power failure Coils rated

More information

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases

Page. Circuit-Breakers M4 2 for motor protection. Auxiliary contacts 3 Signalling switch Auxiliary releases Circuit Breakers M4 Page Circuit-Breakers M4 2 for motor protection Auxiliary contacts 3 Signalling switch Auxiliary releases Insulated 3-pole busbar system 4 Terminal block DIN-rail adapters 5 Busbar

More information

SU200M Datasheet. Branch protection acc. to CSA C22.2 No.5 / UL 489

SU200M Datasheet. Branch protection acc. to CSA C22.2 No.5 / UL 489 MINIATURE CIRCUIT BREAKERS SU200M Datasheet Branch protection acc. to CSA C22.2 No.5 / UL 489 The miniature circuit breaker SU200 M is ABB s solution for UL 489 branch circuit protection up to 480 Y/277

More information

1492-CB 1492-GH 1492-GS

1492-CB 1492-GH 1492-GS 1 The Allen-Bradley Line of Devices Allen-Bradley offers 3 different lines of Circuit Breakers (Supplementary Protectors) and a line of branch circuit rated Fuse Holders. Allen-Bradley Thermal Magnetic

More information

F-Series. Circuit Breaker

F-Series. Circuit Breaker F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic

More information

Phase + Neutral, neutral on right side

Phase + Neutral, neutral on right side 87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34

More information

ER circuit breaker - Hydraulic magnetic,

ER circuit breaker - Hydraulic magnetic, ER circuit breaker - Hydraulic magnetic, Datasheet railway, high current and voltage Features Ideal for high current and high voltage applications Precise, temperature independent operation Panel mount

More information

F-Series. Circuit Breaker

F-Series. Circuit Breaker F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic

More information

LK Position Switches TECHNICAL DATASHEET.

LK Position Switches TECHNICAL DATASHEET. LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions

More information

Mini contactors B6, BC6 with 3 pole

Mini contactors B6, BC6 with 3 pole Data sheet Mini contactors B6, BC6 with 3 pole Mini contactors from ABB are used for remotely ling motors and other loads wherever space is at a premium. These devices feature hum free coils, shallow depth,

More information

Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly

Power distribution. RiLine fuse elements. NH fuse-switch disconnectors, size 000. For mounting plate assembly NH fuse-switch disconnectors, size 000 Version -pole, cable outlet at the top/bottom For the use of fuse inserts to EN 60 - Technical specifications to IEC/EN 60 947-, see chapter -5, page 6 see chapter

More information

Micro Contactor MA Series

Micro Contactor MA Series Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC

More information

DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side

DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation

More information

Jtec 10kA Miniature Circuit Breaker

Jtec 10kA Miniature Circuit Breaker EN 60898 Jtec 10kA Miniature Circuit Breaker Techna s JTEC range has been enthusiastically adopted by a diverse range of customers seeking a cost effective 10kA performance. Jtec MCBs are available in

More information

MS-Series. Circuit Breaker

MS-Series. Circuit Breaker MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial

More information

Safety Relay Unit. Ordering Information. Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries

Safety Relay Unit. Ordering Information. Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries Safety Relay Unit Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries Two-pole slim models that are only 22.5 mm wide, three-pole models that are only 68 mm wide,

More information

S200 UL 489 Series. Miniature circuit breakers S200. Features. Description

S200 UL 489 Series. Miniature circuit breakers S200. Features. Description UL 489 Series UL 489 Series Description The Series miniature circuit breaker offers a compact solution for protection requirements. The U AND UP devices are UL 489 tested limiting and DIN rail mounted.

More information

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications 2CDC021031S0011 2CDC021033S0011 The miniature circuit breaker S 200 M UC extends the established ABB System pro M compact

More information

Series L9 UL489 Miniature Circuit Breakers

Series L9 UL489 Miniature Circuit Breakers Series L9 UL489 iniature Circuit Breakers Industrial Circuit Breakers for Branch Circuit Protection up to 63 Amps L9 Series B Circuit Breakers Series B L9 UL489 circuit breakers offer new features, expanded

More information

Special Purpose Fuses

Special Purpose Fuses Special Purpose Fuses Fuses for DC voltage applications www.eti.si ETI Elektroelement d.d. Obrezija 5, SI - 111 Izlake Slovenija Tel. + 38 03 5 57 570 Faks + 38 03 5 7 077 eti@eti.si NH DC 80 V - Telecom

More information

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers

MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when

More information

Technical Information

Technical Information -100 Controller IEC Performance Data (CSA C22.2, UL 508 No. 14 in connection with a short-circuit protection device Catalog No. -100... 25A 40A 63A 90A Maximum Short-Circuit Current 480V [ka] 65 65 42

More information

up to 63 A (1 module per pole)

up to 63 A (1 module per pole) 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Direct current MCB DX 3 16kA, up to 63 A (1 module per pole) CONTENTS PAGE 1. Description - Use... 1 2. Range... 1 3. Overall dimensions...

More information

TX³ RCCBs 2P up to 100 A

TX³ RCCBs 2P up to 100 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up

More information

System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489

System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489 Data Sheet System pro M compact for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU200 M is BB s solution for UL 489 branch circuit protection

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

3VU13, 3VU16 Circuit-Breakers

3VU13, 3VU16 Circuit-Breakers 3VU3, 3VU6 Circuit-Breakers Description The 3VU3, 3VU6 circuit-breakers are compact circuit-breakers for currents up to 80 A which operate according to the current limiting principle. The devices are used

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...

More information

AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals

AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.

More information

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases

Circuit-Breakers M4 166 for motor protection. Auxiliary contacts 167 Signalling switch Auxiliary releases Index Page Circuit-Breakers M4 166 for motor protection Auxiliary contacts 167 Signalling switch Auxiliary releases Insulated 3-pole busbar system 168 Terminal block DIN-rail adapters 169 Busbar adapters

More information

PB-Series. GFCI/ELCI & Panel Seal

PB-Series. GFCI/ELCI & Panel Seal PB-Series GFCI/ELCI & Panel Seal The PB-Series utilizes the hydraulic magnetic principle which provides precise operation and performance even when exposed to extremely hot and/or cold application environments.

More information

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI

Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI . Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,

More information

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories

MS /27/2015. ABB contact for United States of America. General Information Extended Product Type: Categories Page 1 of 5 MS132-10 ABB contact for United States of America General Information Extended Product Type: Product ID: EAN: Catalog Description: Long Description: MS132-10 1SAM350000R1010 4013614400100 MS132-10

More information

DX³ 4-pole RCBO 6000 A/10 ka

DX³ 4-pole RCBO 6000 A/10 ka 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ 4-pole RCBO CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series

TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current

More information

Protection Equipment. 5/2 Introduction

Protection Equipment. 5/2 Introduction Protection Equipment /2 Introduction SIRIUS 3RV2 Motor Starter Protectors/ Circuit Breakers up to 40 A /6 General data /12 For motor protection /14 For motor protection with overload relay function /1

More information

1489-M Circuit Breakers

1489-M Circuit Breakers Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Terminal design helps prevent wiring misses Scratch- and solventresistant printing Suitable

More information

Safety rope switches with reset for emergency stop

Safety rope switches with reset for emergency stop Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available

More information

circuit breakers circuit breakers Thermal Circuit Breaker, rotary knob actuation, 1-, 2- or 3-pole Description Applications

circuit breakers circuit breakers Thermal Circuit Breaker, rotary knob actuation, 1-, 2- or 3-pole Description Applications Thermal Circuit Breaker, rotary knob actuation, -, - or 3-pole -pole standard version 3-pole type without front bezel/knob standard front bezel/knob Description Thermal circuit breaker -, - or 3-pole Supplementary

More information

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

Miniature Circuit Breaker

Miniature Circuit Breaker Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the

More information

The breakers offer thermal-magnetic trip protection according to Z and K characteristics.

The breakers offer thermal-magnetic trip protection according to Z and K characteristics. Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific

More information

General_technical_data Series

General_technical_data Series Slow-make switching element Switching system The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The

More information

ELFA E90S MINI BREAKERS

ELFA E90S MINI BREAKERS ELFA E90S MINI BREAKERS ELFA E90S SERIES UL Approved (UL1077) 10KA INTERUPTION CAPACITY OPTIONS FIELD KITS Auxiliary Contacts Alarm Contact Shunt Trip UV Trip Current Limiting Design (Class 3) 3 Different

More information

S200 UL 1077 Series S200. Supplementary protective devices. UL 1077 Series. Miniature. circuit breakers. S200 Supplementary protective devices

S200 UL 1077 Series S200. Supplementary protective devices. UL 1077 Series. Miniature. circuit breakers. S200 Supplementary protective devices UL 077 Series Supplementary protective devices The UL 077 Series miniature supplementary protector offers a compact solution for protection requirements. The devices are DIN rail mounted. The is available

More information

Motors Automation Energy Transmission & Distribution Coatings. UMBW UL489 and UL1077 Thermal-Magnetic MCB

Motors Automation Energy Transmission & Distribution Coatings. UMBW UL489 and UL1077 Thermal-Magnetic MCB Motors Automation Energy Transmission & Distribution Coatings UMBW UL489 and UL1077 Thermal-Magnetic MCB UL489 AND UL1077 Circuit Protection Overview: Single pole and multi-pole thermal-magnetic minature

More information

PD-Series Ground Fault Circuit Protection

PD-Series Ground Fault Circuit Protection PD-Series Ground Fault Circuit Protection SmartGuard is an equipment ground fault protection device that functions as a standard high-quality Carling hydraulic/ magnetic circuit breaker, offering customized

More information

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive

More information

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.

More information

DX³ RCBO 4500/6 ka Phase + Neutral, neutral on left

DX³ RCBO 4500/6 ka Phase + Neutral, neutral on left 87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX³ RCBO 4500/6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection...

More information

Electronic overload relays EF205 and EF370

Electronic overload relays EF205 and EF370 Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information