MACHINES FOR LAND RECLAMATION AND WATERCOURSE MAINTENANCE FORESTRY AND AGRICOLTURAL EQUIPMENTS. Quality & Tradition since 1976

Transcription

1 MACHINES FOR LAND RECLAMATION AND WATERCOURSE MAINTENANCE FORESTRY AND AGRICOLTURAL EQUIPMENTS

2 MISSION THE MISSION OSMA IS TO SATISFY THE DEMANDS OF HIS OWN CLIENTS, SIMPLIFYING THEIR JOB BEING IMPROVING THE PRODUCTIVITY, FROM SEVENTY UNTIL TO NEXT CHALLENGE 2

3 A LINE - SHREDDERS FOR TRACTORS DHSE DHBA DHFH - FRONTALI - DHLE DHL DHLI PAG.6 PAG.7 PAG.8 PAG.9 PAG.10 PAG.11 B LINE - HYDRAULIC HEDGE CUTTER ARMS DHE - Agricoltural use DHA - Light professional use DHAS - Light professional use with 2nd telescopic arm DHPS - Professional use with hyd.extension DHP/AV - with positionable hydr.arm DHIS -Heavy duty series PAG.13 PAG.14 PAG.15 PAG.16 PAG.17 PAG C LINE - FORESTRY MULCHERS TLPF TLPF-UX TPF TPF-UX PAG.21 PAG.22 PAG.23 PAG.24 D LINE - FLAIL HYDRAULIC MOWERS TE-DXL TE-DL TE-DP TE-CL TE-CP PAG.26 PAG.27 PAG.28 PAG.29 PAG.30 3

4 E LINE - FORESTRY HYDRAULIC MOWERS TFXL TFL TFL-UX TFM TFM-UX TFS TFS-UX TP-R TFL/R e TFM/R PAG.32 PAG.33 PAG.34 PAG.35 PAG.36 PAG.37 PAG.38 PAG.39 PAG.40 F LINE - ATTACHMENTS FOR SHRUB ARMS AND FOR MIDI-EXCAVATORS TNA PAG.42 TP-TPC PAG.43 TPCT PAG.44 RF - ROTOMILLING CUTTERS PAG.45 FF - ROTOVATOR ACQUATIC ROTOCUTTER PAG.46 HKL - WEED CUTTING BUCKET PAG.47 TS - TREE SHEARS PAG.48 TR - CUTTER BAR PAG.49 BF/SCH - BARRE FALCIANTI PER POTATURE PAG.50 BD - CUTTER DISC PAG.51 G LINE - BRUSH MOVER ATTACHMENT FOR SKEED STEER SS-CL PAG.53 SS-TFF PAG.54 SS-TFF UX PAG.55 H LINE - MOWING BOATS S1F MF PAG.57 PAG.58 4

5 A LINE - SHREDDERS FOR TRACTORS SERIES DHSE DHBA DHF/H DHLE DHL DHLI 5

6 DHSE REAR SHREDDERS agricoltural use on small tractor A LINE - SHREDDERS Agricultural back shredders, for small firms, proper for cutting grasses, small bushes, rests of prunings of vineyards, with clubs rotor for cut up to 3. For tractors from 30 to 60 hp. 170mm rear adjustable roller. Rotor with P Type knives, stronger frame built with very high quality steel (DOMEX 700- SS355), double chassis and counter-blades. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. Hammer nr. DHSE P 16 DHSE P 18 DHSE p 20 Hammer type Rotor type - Hammer nr. DHSE 150 P - 16 light hammer for grasses, small bushes max 3 size DHSE 180 P - 18 DHSE 200 P - 20 Cod. ZP Rotor P 6

7 DHBA REAR SHREDDERS agricoltural use A LINE - SHREDDERS Agricultural back shredders, for small firms, proper for cutting grasses, small bushes, rests of prunings of vineyards, with clubs rotor for cut up to 5. For tractors from 50 to 90 hp. 170mm rear adjustable roller. Rotor with P Type knives, stronger frame built with very high quality steel (DOMEX 700- SS355), double chassis and counter-blades.. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. Hammer nr. DHBA N 12 DHBA N 14 DHBA N 16 DHBA N 16 Utensili da taglio Rotor type - Hammer nr. DHBA 160 N - 12 DHBA 180 N - 14 DHBA 200 N - 16 Cod. ZP Rotor N DHBA 230 N

8 DHF/H FRONT SHREDDERS FOR TRACTORS - PTO DRIVE SHAFT 1000 g/min. A LINE - SHREDDERS -Professional Front Heavy-Shredders for grass, bushes, branches, with knives or hammers, for cutting vegetation up to 7/8 -Ideal for general clearing of uncultivated fields, green areas, under-wood, etc.. -For tractor from 80 to 120hp. Three point linkage, cat. II. Right-side hydraulic shift system.frontal opening hood with cylinder. 170mm rear adjustable roller. 80hp gear box, for PTO drive shaft 1000 rpm. Rotor with knives (F), or hammer (G). Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and counter-blades. NOTES: Drive shaft 1-3/8 z6, free wheel. 4 Quick release couplins, for cylinders controlling. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. DHF/H F-G DHF/H F-G DHF/H F-G Tools heavy hammer for grasses, bushes max size 8 Knifes for grasses, bushes, reeds max size 6 cm Cod. ZP Rotor G Cod.ZP Rotor F Rotor - Hammer type - nr. Rotor - Knifes type - nr. DHF/H 190 G - 16 F - 64 DHF/H 220 G - 20 F - 80 DHF/H 240 G - 20 F

9 DHLE CENTRAL AND SIDE SHREDDERS FOR TRACTORS - agricoltural use - A LINE - SHREDDERS Agricoltural shredder back and side, with hammer rotor, suited to cut grasses, bushes until 4 Tractor power required: from 40 to 80 HP Three point linkage, cat. II., External Gear box, antishock mechanic system with springs. Rotor with hammers, 170mm rear adjustable roller. 80hp gear box, Frontal opening hood. OPTIONALS: Automatic antishock system Shaft with constant velocity joints. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. DHLE P DHLE P DHLE P Tools Rotor type - Hammer nr. light hammers for grasses, bushes max size 3 Cod.ZP00003 Rotor P DHLE 130 P - 16 DHLE 150 P - 18 DHLE 180 P

10 DHL REAR AND SIDE SHREDDERS - PROFESSIONAL USE - A LINE - SHREDDERS Rear and side shredders, in line and offset works, rotor with knives or hammers, for grass, bushes, branches up to 8 Ideal for farmers, contractors, for clearing ditches, banks of water-course, road side banks, areas in general. Tractor power required: from 70 to 130 HP Three point linkage, cat. II mm. Adjustable rear roller - External Gear box for PTO 540 RPM. Heavy-duty rotor with knives or hammers. Drive shaft gr.6, 1-3/8 Z6. Oil flow regulator for hydraulic side-shift cylinder. Hydraulic cylinder for head positioning in single way. Stronger frame built with very high quality steel (DOMEX 700-SS355), and counter-blades. SRS, antishock valve, OSMA, with springs system. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. DHL F-G DHL F-G DHL F-G Tools heavy hammer for grasses, bushes max size 8 Knifes for grasses, bushes, reeds max size 6 cm Cod. ZP Rotor G Cod.ZP Rotor F Rotor - Hammer type - nr. Rotor - Knifes type - nr. DHL 160 G - 12 F - 48 DHL 190 G - 16 F - 64 DHL 220 G - 20 F

11 A LINE - SHREDDERS DHLI REAR AND SIDE SHREDDERS WITH HYDRAULIC TRANSMISSION - HEAVY USE - -Heavy-duty in-line and offset shredders, for grass, bushes, branches, rotor with kinves or hammers, Ideal for contractors, for clearing ditches, banks of water-course, road side banks, hard jobs where the standard machines can t works. -HYDRAULIC HIGH POWER TRASMISSION - Tractor power required: from 90 to 130 HP Three point linkage, cat. II.170mm. Adjustable rear roller.heavy-duty rotor with knives (F) or hammers (G).Oil flow regulator for hydraulic side-shift cylinder. 140 LT. oil tank. Oil cooler 12 vdc. Piston pump and piston motor for high performance. 75 hp Rotor Cutting Power. Gear box 75hp, to fix directly on the PTO tractor at 540rpm. Hydraulic valve, double effect, 1, to control the oil from the piston pump to the piston motor. This valve is controlled by the operator, trought a cable, fixed into the cab. Stronger frame built with very high quality steel (DOMEX 700-SS355). Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. DHLI F-G DHLI F-G DHLI F-G Tools heavy hammer for grasses, bushes max size 8 Knifes for grasses, bushes, reeds max size 6 cm Cod. ZP Rotor G Cod.ZP Rotor F Rotor - Hammer type - nr. Rotor - Knifes type - nr. DHLI 160 G - 12 F - 48 DHLI 190 G - 16 F - 64 DHLI 220 G - 20 F

12 B LINE - SHRUB ARMS SERIES DHE DHA DHAS DHP/AV DHIS DHIS PLUS 12

13 DHE SHRUB ARM - AGRICULTURAL USE - B LINE - ARMS -Ligth shrub arm, for farmer uses, with 105 flail mower, and rotor with knife A, to cut grass and bushes up to 5 Tractor power required: from 50 to 90 HP Three point linkage, cat. II. PTO 540 rpm. 140mm. adjustable rear roller. Drive shaft gr.4, Locking tie rods, Reversible rotor rotation, with kinfe type A (articulated Y knives). HP on the rotor 40hp. Hydraulic breakaway with hydr.valve. Cables control with 4 levers, gear pump and motor. Direct trasmission on the flail rotor. Floating system on the first arm and on the mower. Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections. Cod Arm lenght Transport size Weight kgs. Tractor power HP Rotor speed rpm/1 Mower + Rotor mod. DHE TNE 80 + O DHE TNE 80 + O DHE TNA A DHE TNA A NOTE: Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: -Rotor type B, to cut grass and bushes up to 3 -Rotor type C, to cut bushes and branches up to 4(no extra costs) OPTIONALS: -Oil cooler -Rear tail lights -Mower head 120 (TNA120) -Mower head hydraulic pivoting for 90 Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose spatula knifes for grass, bushes and wood max size 5 cm Cod. ZP Rotor C - optional - Multi purpose Y knifes for grass, bushes and shrubs max size 4 cm Cod.ZP Rotor B - optional - Multi purpose Y knifes for grass, bushes max size 2 Cod.ZP std on DHE

14 DHA SHRUB ARM - SEMI PROFESSIONAL USE - B LINE - ARMS Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 105 flail mower, and rotor with knife A to cut up to 4/5 Tractor power required: from 70 to 100 HP Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods,140mm adjustable rear roller. Pivoting arm frame with hydraulic cylinder, Hydraulic breakaway with hydr.valve. Reversible rotor rotation, with kinfe type A (articulated Y knives). On the rotor 48 hp.cables control with 4 levers, gear pump and motor. Direct trasmission on the flail rotor.floating system on the first arm and on the mower. Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections. Cod Arm lenght Transport size Weight kgs. Tractor power HP Rotor speed rpm/1 Mower + Rotor mod. DHA TNA 100+A DHA TNA 100+A DHA TNA 100+A NOTE: Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: -Rotor type B, to cut grass and bushes up to 3/4 -Rotor type C, to cut bushes and branches up to cm 5. OPTIONALS: -Oil Cooler -Rear tail light -Mower head 120 (TNA120) - Mower head hydraulic pivoting for 90 -Low pressure controls and ergonomic Joystick Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose Y knifes for grass, bushes and shrubs max size 4 cm Cod.ZP Rotor B - optional - Multi purpose spatula knifes for grass, bushes and wood max size 5 cm Cod. ZP Rotor C - optional 14

15 DHAS SHRUB ARM - SEMI PROFESSIONAL USE - WITH TELESCOPIC ARM B LINE - ARMS Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 105 flail mower,and rotor with knife A, to cut up to 4/5cm, with telescopic device on the second arm. Tractor power required: from 70 to 120 HP Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods, 140mm adjustable rear roller. Pivoting arm frame with hydraulic cylinder, Hydraulic breakaway with hydr.valve. Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 48hp. Cables control with 5 levers, gear pump and motor. Direct trasmission on the flail rotor. Floating system on the first arm and for mower. Telescopic extension 90cm (DHAS 600), 110cm (DHAS700), 130cm(DHAS800)Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections Arm lenght Telescopi ext. Transport size Weight kg. Tractor HP Rotor rpm/1 Mover + Rotor mod. DHAS TNA 100+A DHAS TNA 100+A DHAS TNA 100+A NOTE: Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: -Rotor type B, to cut grass and bushes up to 3/4 -Rotor type C, to cut bushes and branches up to cm 5. OPTIONALS: -Oil Cooler -Rear tail light -Mower head 120 (TNA120) - Mower head hydraulic pivoting for 90 -Low pressure controls and ergonomic Joystick Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose Y knifes for grass, bushes and shrubs max size 4 cm Cod.ZP Rotor B - optional - Multi purpose spatula knifes for grass, bushes and wood max size 5 cm Cod. ZP Rotor C - optional 15

16 DHPS SHRUB ARM - PROFESSIONAL USE - B LINE - ARMS Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120 flail mower, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with telescopic device on the second arm. Tractor power required: from 90 to 130 HP Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods, 140mm adjustable rear roller. Flail mower mod. TP 120, with rotor type A. Pivoting arm frame with hydraulic cylinder, Hydraulic breakaway with hydr.valve. Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 58 hp. Cables control with 5 levers, oil cooler, rear tails light, Cast iron double-gear pump and motor, gear box with 65hp.Floating system on the first arm and on the mower. Telescopic extension 90cm (DHPS 600), 110cm (DHPS700), 130cm(DHPSS800) Arm lenght Telescopi ext. Transport size Weight kg. Tractor HP Rotor rpm/1 Mover + Rotor mod. DHPS TP 120+A DHPS TP 120+A DHPS TP 120+A NOTE: Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: rotor type B, to cut grass and bushes up to 4/5 rotor type C, to cut bushes and branches up to cm 7. OPTIONALS: -Low pressure controls and ergonomic Joystick - Rise for TPC 125 mower (with belts transmission) -Rise for frontal mower hood opening with hydr.cylinder, who function with the quick couplings from the tractor -Rise for cast iron gear box Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose Y knifes for grass, bushes and shrubs max size 4 cm Cod.ZP Rotor B - optional - Multi purpose spatula knifes for grass, bushes and wood max size 5 cm Cod. ZP Rotor C - optional 16

17 DHP/AV -SHRUB ARM- With mower head moving system in the middle of tractor- AMP SYSTEM Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120 flail mower, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with second arm with hydraulic system to move the mower in the middle of the tractor, for a better viewing during the works, AMP SYSTEM Tractor power required: from 90 to 120 HP Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods, 140mm adjustable rear roller. Flail mower mod. TP 120, with rotor type A. B LINE - ARMS Pivoting arm frame with hydraulic cylinder, Hydraulic breakaway with hydr.valve. Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 58hp.Cables control with 5 levers, oil cooler, rear tails light, Cast iron double-gear pump and motor, gear box with 65hp. Floating system on the first arm and on the mower. Arm lenght Transport size Weight kg. Tractor HP Rotor rpm/1 Mover + Rotor mod. DHP/AV TP 120+A DHP/AV TP 120+A NOTE: Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: rotor type B, to cut grass and bushes up to 4/5 rotor type C, to cut bushes and branches up to cm 7. OPTIONALS: -Low pressure controls and ergonomic Joystick - Rise for TPC 125 mower (with belts transmission) -Rise for frontal mower hood opening with hydr.cylinder, who function with the quick couplings from the tractor -Rise for cast iron gear box Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose Y knifes for grass, bushes and shrubs max size 4 cm Cod.ZP Rotor B - optional - Multi purpose spatula knifes for grass, bushes and wood max size 5 cm Cod. ZP Rotor C - optional 17

18 DHIS - SHRUB ARM - HEAVY DUTY PROFESSIONAL SERIES - B LINE - ARMS Heavy-duty professional shrub arm, for road-side banks clearing ditches and water-course banks. Mower head TPCT 130 model, mt.1.25, with rotor type F, for grass, bushes, branches up to 7/8 cms., telescopic device on the second arm. made in exagonal section. This machine is built with very high quality steel (WELDOX 700). Tractor power required: from 110 to 160 HP Three point linkage, cat. II., PTO 1000 rpm, Drive shaft gr.6, Locking tie rods,170mm adjustable rear roller. Flail mower mod. TPCT 130, with rotor type F. Pivoting arm frame with hydraulic cylinder, Hydraulic breakaway with hydr.valve. Cables control with 5 levers, oil cooler, rear tails light, Piston pumps and piston motor, double 100hp gear box, Cutting power 75hp. Mower head with hydraulic frontal hood opening with cylinder, and with trasmission belts. Hydraulic hoses in highest pressure type, 4SH, of 1 for mower, and 3/8 for cylinders control. Arm lenght Transport size Weight kg. Tractor HP Rotor rpm/1 Mover + Rotor mod. DHIS TCPT130+F DHIS TCPT130+F DHIS TCPT130+F DHIS 1000 PLUS TCPT130+F NOTE: Normally, TPCT mower has assembled with rotor F, but availables, there are also the following rotors: -Rotor D, for mixed vegetation, grass and branches, special for water-course banks, to cut very the vegetation very thinner. -Rotor G, hammers, for big vegetation up to 8 OPTIONALS: -Low pressure controls and ergonomic Joystick -High quality electric-low pressure and proportional valve, with ergonomic Joystick -Hydraulic cylinder fitted on the left side anterior axle tractor 18

19 DHIS 1000 PLUS - SHRUB ARM - HEAVY DUTY PROFESSIONAL SERIES - B LINE - ARMS The model DHIS 1000 PLUS is a specific type built for uses on banks of channels and differentiates from the standard version for the followings particular: The zipper of rotation has the attack of the first arm in reduced position. The first arm is bent, type that of the excavators, says monolithic, this particularity increases the depth of cut in scarp, in fact in comparison to an arm standard DHIS of the same length, this version PLUS reaches a greater distance of 2 Meters. The second telescopic arm, with two telescopic parts, is built with an OCTAGONAL section, and not hexagonal, for a best linearity of the telescopic arm and a greater resistance to the non linear strengths. The pomp of the services is an axial pump and the distributor is to compensated sections, electronic-proportional, with joystick. Multi purpose knifes for grass and bushes max size 3 Cod.ZP Rotor A - standard - Multi purpose Y knifes for grass, bushes and shrubs max size 7 Cod.ZP Rotor D - optional - heavy hammer for grasses, bushes max size 8 Cod.ZP00002 Rotor G without extra costs Knifes for grasses, bushes, reeds max size 6 cm Cod.ZP Rotor F without extra costs 19

20 C LINE - FORESTRY MULCHERS SERIES TLPF TLPF-UX TPF TPF-UX 20

21 TLPF - FORESTRY MULCHERS - pto 1000 rpm/1 - C LINE - FORESTRY MULCHERS Forestry mulcher medium-heavy series, drum rotor with mobile hammers, to cut branches, bushes and small trees up to diameter of 25 cms. Tractor power required: from 70 to 140 HP Three point linkage, cat. II., PTO 1000 rpm, Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and double counter-blades.100hp gear box, Drum rotor HD type, with mobile hammers, Drive shaft gr.6, with power limitator and free wheel,tlpf-ux have one single transmission belt. TLPF-UX 220/2 has a double transmission belts. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. PTO rpm/1 TLPF TLPF TLPF TLPF OPTIONALS: Pushing frame TLPF and 220 Hydraulic third link Reinforced Hammer Tools: Forged hammer mono sharp Cod. ZP HD Rotor standard Forged hammer mono-sharp with amount carried over of welding to the tungsten carbide Cod.ZP10280MD - HD Rotor optional 21

22 TLPF-UX FORESTRY MULCHERS - pto 1000 rpm/1 - C LINE - FORESTRY MULCHERS Forestry mulcher medium-heavy series, drum rotor with fixed Tools, to cut branches, bushes and small trees up to diameter of 25cms. Tractor power required: from 80 to 140 HP Three point linkage, cat. II., PTO 1000 rpm, Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and double counter-blades.100hp gear box, Drum rotor HD type, with FIXED Tools, Drive shaft gr.6, with power limitator and free wheel,tlpf-ux have one single transmission belt. TLPF-UX 220/2 has a double transmission belts. Cutting wide Exterior width Weight kg. HP Tractor Belt nrs. Rotor Mod. PTO rpm/1 TLPF-UX TLPF-UX TLPF-UX TLPF-UX OPTIONALS: Pushing frame TLPF-UX Hydraulic third link Reinforced Hammer Tools: Fixed Tools with strong teeths (carbide insert) Cod. UX X200 Rotor standard 22

23 TPF FORESTRY MULCHERS - pto 1000 rpm/1 - C LINE - FORESTRY MULCHERS Forestry mulcher Heavy Duty series, drum rotor with mobile hammers, to cut branches, bushes and small trees up to diameter of 25cms. Tractor power required: from 100 to 180 HP Three point linkage, cat. II., PTO 1000 rpm,rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis ( with the under frame cover made in HARDOX 400), and triple counter-blades.140hp gear box, Drive shaft gr.6, with power limitator and free wheel, Double transmissions belts XPB QUAD-POWER. Cutting wide Exterior width Weight kg. HP Tractor Belts nr. Hammer nr. PTO g/min. TPF TPF TPF TPF OPTIONALS: Pushing frame TPF Hydraulic third link Heavy shaft 1-3/4 Z6 GR.8 type V with limiter Utensili da taglio Forged hammer mono sharp Cod. ZP HD Rotor standard Forged hammer mono-sharp with amount carried over of welding to the tungsten carbide Cod.ZP10280MD - HD Rotor optional 23

24 TPF-UX FORESTRY MULCHERS - pto 1000 rpm/1 - C LINE - FORESTRY MULCHERS Forestry mulcher Heavy Duty series, drum rotor with fixed Tools, to cut branches, bushes and small trees up to diameter of 40 cms. Tractor power required: from 100 to 250 HP Three point linkage, cat. II., PTO 1000 rpm,rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis ( with the under frame cover made in HARDOX 400), and triple counter-blades.140hp gear box, Drive shaft gr.6, with power limitator and free wheel, Double transmissions belts XPB QUAD-POWER. Cutting wide Exterior width Weight kg. HP Tractor Belts nr. Hammer nr. PTO g/min. TPF-UX TPF-UX TPF-UX TPF-UX OPTIONALS: Pushing frame TPF Hydraulic third link Heavy shaft 1-3/4 Z6 GR.8 type V with limiter Tools: Fixed Tools with strong teeths (carbide insert) Cod. UX 456- X273 Rotor standard 24

25 D LINE - FORESTRY HYDRAULIC MOWERS FOR EXCAVATORS SERIES TE-DXL TE-DL TE-DP TE-CL TE-CP 25

26 TE-DXL - MINI FLAIL MOVER FOR GRASS D LINE - EXCAVATOR FLAIL MOWERS MINI-Flail mower for grass, suitables to mini-excavators with weight up to 1.6 t., with power up to 20hp. -Max. working diameter 1,5 Top bracket with pins. Hydraulic cast iron gear motor.reversible 8cc, fitted with directly to the rotor. 100mm, rear adjustable roller. Rotor with knife mod. H Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TE 60DXL TE 80DXL NOTE: The hydraulic motor hasn t the third hose, for drain line This mower can t accept other kind of rotors OPTIONALS: Floating link Adjustable flow rate valve 1/2 Tools: Knifes for grass and bushes max size 1 Cod. ZP H Rotor - standard - 26

27 TE/DL - MINI FLAIL MOVER FOR GRASS - MINI EXCAVATORS D LINE - EXCAVATOR FLAIL MOWERS Flail mower for grass, and small branches, suitables to mini-excavators with weight up to 3.0 t., with power up to 35hp. -Max. working diameter 2,5/3. Steel plat, not painted, to buil the top bracket for excavator. 100mm, rear adjustable roller. Rotor with knife mod. O. Hoses with 1500m of lenght. Hydraulic cast iron motor of 11cc, reversibile, fitted directly with the rotor Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TE 80DL TE 100DL NOTE: The hydr. Motor hasn t the third hose for drain line, usually it is used a 11cc size motor, but there are availables also 14cc, and 16cc sizes, without any rise on the price. Over than the rotor mod. O, it is available for DL the rotor I OPTIONALS: Top bracket with pins D.30/35-35/40-45/50 Floating link DL-DP Adjustable flow rate valve 1/2 Multipurpose knifes for grass and branches. max size 2 Cod.ZP ZP Rotor O - standard - Rotor Knifes Rotor Knifes TE 80 DL O - 24 I - 12 Multi purpose spatula knifes for grass, bushes and wood. max size 3 Cod. ZP Rotor I - optional - TE 100 DL O - 40 I

28 TE/DP - FLAIL MOWERS FOR GRASS AND BRANCHES, FOR MINI-EXCAVATORS D LINE - EXCAVATOR FLAIL MOWERS Flail mower for grass, and small branches, suitables to mini-excavators with weight up to 6.0 t., with power up to 50hp. - Max. working diameter 6 Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversibile, fitted directly with the rotor. (for motors size see the notes below) 140mm,rear adjustable roller. Rotor with knife type A. Hoses with 2,00 mts lenght. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TE 80/DP TE 100/DP TE 120/DP NOTE: The standard hydr. Motor used are: 14 cc. TE 80DP 16 cc. TE100 DP 22 cc. TE 120DP Standard rotor is A type, we can install -B- -C- or -I- type also. OPTIONALS gr.3 motor on TE80-100DP Adjustable flow rate valve 3/4 Adjustable flow rate valve 1/2 -Top bracket with pin 30/40 Floating link DP Parking mower leg -Top bracket with pin 45/50 Tools: Multipurpose knifes for grass and bushes. max size 3 Cod.ZP Rotor A - standard - Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - optional - Spatula knifes for grass and bushes max size 3 Cod.ZP Rotor I - optional - Spatula Knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - 28

29 TE/CL - FLAIL MOWERS FOR GRASS AND BRANCHES, FOR MIDI-EXCAVATORS D LINE - EXCAVATOR FLAIL MOWERS Flail mower for grass, branches and bushes, suitables to Midi-excavators with weights from 6,0t. to 8,0t., and with power up to 70 hp. Max working diameter 6/7. Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversible, without the third hose for drain line and fitted with a trasmission belts to the rotor. Standard rotor is type B; 140 mm. rear adjustable roller. Hoses with 2,0 mts lenght. Belts transmission type SPBX. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TE 100/CL TE 120/CL NOTE: The standard hydr. Motor used are: 34cc with the internal drain line Standard rotor type B OPTIONALS Type A Rotor Type C Rotor Type I Rotor Floating link DP Adjustable flow rate valve 3/4 34 cc. Piston motor Top bracket with pins Parking mower leg Tools: Multipurpose knifes for grass and bushes. max size 3 Cod.ZP Rotor A - standard Spatula knifes for grass and bushes max size 3 Cod.ZP Rotor I - optional - Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - optional - Spatula Knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - 29

30 D LINE - EXCAVATOR FLAIL MOWERS TE/CP - FLAIL MOWERS FOR GRASS, BUSHES AND BRANCHES FOR MIDI-EXCAVATORS Flail mower (semi-forestry range) for grass, branches, bushes and small trees, suitables to Midi-excavators with weights from 8,0 to 13,0 t. and with power up to 100hp. -Max. working diameter 8 Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversible, without the third hose for drain line. and fitted with a trasmission belts to the rotor. Rotor type F. Strong double frame made with high quality steel (SS355-DOMEX 700). 170mm. Rear adjustable roller. Hoses with 2,0mts lenght. Trasmission belts with SPBX type. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TE 120/CP TE 160/CP NOTE: The standard hydr. Motor used is: 43 cc. with the internal drain line Standard rotor is B type, we can install -C- -F- or -G- type also. OPTIONALS Top bracket with pins 47 cc.piston motor Parking mower leg Floating link DP Adjustable flow rate valve 3/4 Tools: Spatula knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - Knifes for grasses, bushes, reeds max size 6 cm Cod.ZP Rotor F - optional - Heavy hammers for runners, bushes, reeds, bushes Diam.max 8 Cod.ZP Rotor G - optional - Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - standard - 30

31 E LINE - FORESTRY MOVERS FOR EXCAVATORS SERIES TFXL TFL TFL-UX TFM TFM-UX TFS TFS-UX TP-R TFL-R E TFM-R 31

32 TFXL - FORESTRY MOVERS FOR MIDI - EXCAVATORS E LINE - FORESTRY MOVERS Forestry mover for shrubs, dense vegetation and small plants, apply on midi-excavators with weights from 5.0 up to 7.5 ton and powers up to 70 HP. Installable on professional brush cutter arms with a hydraulic piston pump. Max cutting 10. Steel plat, not painted, to buil the top bracket for excavator, rotor with hammers, SPBX transmission V-belts SPBX, heavy renforced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door opening. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFXL NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required OPTIONALS: Top bracket with pins 47 cc.piston motor. Tools: Forged hammer with double cutting Cod. ZP HDL Rotor 32

33 TFL - FORESTRY MOVERS FOR MIDI - EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, MINI-FOREST series, for branches and small trees, suitable to midi-excavators with weights from 7,0 ton up to 10,0 ton. and with power up to 100hp.. -Max. working diameter 15 Steel plat, not painted, to buil the top bracket for excavator, rotor with hammers, transmission V-belts SPBX, heavy renforced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door opening. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFL NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required OPTIONALS Top bracket with pins Hammer with double cutting 56 cc.piston motor Hammer mono cutting with sharp tungsten Tools: Hammer mono cutting Cod.ZP Rotor HD - standard - Hammer double cutting Cod.ZP REV - optional - Hammer mono cutting with tungsten sharp Cod.ZP 10280MD optional 33

34 TFL/UX - FORESTRY MOVERS FOR MIDI - EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, forestry series, for branches and small trees, suitable to midi-excavators with weights from 7,0 ton up to 12,0 ton. and with power up to 100hp.Fixed Tools with tungsten. -Max. working diameter 20 Steel plat, not painted, to buil the top bracket for excavator, rotor HAMMERS WITH CARBIDE TUNGSTEN WELDING ( very good with the mower has to work on grounds where there is big contamination of stones), transmission V-belts SPBX, heavy renforced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door opening.. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFL-UX NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required OPTIONALS: Top bracket with pins 56 cc.piston motor. Tools: Fixed teeths with carbide tungsten welding Cod.UX 285 X200 Rotor - standard - 34

35 TFM - FORESTRY MOVERS FOR MIDI - EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, forestry series, for branches and trees, suitable to midi-excavators with weights from 10,0 ton up to 15,0 ton. and with power up to 120hp. - Max. working diameter 25. Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc.Rotor type HD, with mobile strong hammers. Hoses with 2,0 mts. Lenght. Trasmission belts with XPB type.frontal hood with hydraulic opening system. Strong double frame made with high quality steel (SS355-DOMEX 700),and with a cover inside-steel frame made in HARDOX 400. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFM TFM NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required The TFM series has the ability to install a pair of skids that put the blades at 8-9 higher than the ground level. Are recommended for work where there is a strong presence of stones and boulders e.g. in the mountains OPTIONALS: Top bracket with pins 64 cc.piston motor. Hammer with double cutting Hammer mono cutting with sharp tungsten Tools: Hammer mono cutting Cod.ZP Rotor HD - standard - Hammer double cutting Cod.ZP REV - optional - Hammer mono cutting with tungsten sharp Cod.ZP 10280MD optional 35

36 TFM-UX - FORESTRY MOVERS FOR MIDI - EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, forestry series, for branches and trees, suitable to midi-excavators with weights from 10,0 ton up to 18,0 ton. and with power up to 150hp. - Max. working diameter Steel plat, not painted, to buil the top bracket for excavator.piston motor of 56cc.Fixed teeth rotor, with carbide inserts tooth (UX). Hoses with 2,5 mts lenght. Trasmission with belts XPB. Hydraulic front hood, Strong double frame made with high quality steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and counter blades. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFM-UX TFM-UX NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required The TFM series has the ability to install a pair of skids that put the blades at 8-9 higher than the ground level. Are recommended for work where there is a strong presence of stones and boulders e.g. in the mountains OPTIONALS: Top bracket with pins 64 cc. piston motor Tools: Fixed teeths with carbide tungsten welding Cod.UX 285 X200 Rotor - standard - X200 Rotor - standard - 36

37 TFS - FORESTRY MOVERS FOR EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, MAXI-FOREST series, for branches and trees, suitable to large-excavators with weights from 18,0 ton up to 25,0 ton. and with power up to 180hp. Max. working diameter 35 Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc. Drum rotor type HD, with mobile hammer. Hoses with 3,0 mts. lenght. Trasmission belt type XPB. Hydraulic front hood, Strong double frame made with high quality steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and double counter blades. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFS / TFS / NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required The TFS series has the ability to install a pair of skids that put the blades at 8-9 higher than the ground level. Are recommended for work where there is a strong presence of stones and boulders e.g. in the mountains OPTIONALS Top bracket with pins Hammer with double cutting 64 cc.piston motor Hammer mono cutting with sharp tungsten Tools: Hammer mono cutting Cod.ZP Rotor HD - standard - Hammer double cutting Cod.ZP REV - optional - Hammer mono cutting with tungsten sharp Cod.ZP 10280MD optional 37

38 TFS/UX - FORESTRY MOVERS FOR EXCAVATORS E LINE - FORESTRY MOVERS Flail mower, MAXI-FOREST series, for branches and trees, suitable to large-excavators with weights from 16,0t. up to 25,0 ton. and with power up to 180 hp. Max. working diameter 45 Steel plat, not painted, to buil the top bracket for excavator Piston motor of 84cc. Fixed teeth rotor, with carbide inserts tooth (UX), hoses with 2,5 mts lenght Trasmission with belts XPB. Hydraulic front hood, heavy-double frame made with high quality steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and double counter blades. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFS-UX / TFS-UX / NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required The TFM series has the ability to install a pair of skids that put the blades at 8-9 higher than the ground level. Are recommended for work where there is a strong presence of stones and boulders e.g. in the mountains OPTIONALS Top bracket with pins Tools: Fixed teeths with carbide tungsten welding Cod.UX456 X273 Rotor - standard - 38

39 TP/R - MEDIUM FORESTRY MOVER FOR SPIDER EXCAVATOR E LINE - FORESTRY MOVERS Flail mower (semi-forestry range) for grass, branches, bushes and small trees, suitables to SPIDER-excavators with weights from 6,5 Ton up to 11,0 Ton, with power up to 120hp. Max. working diameter of 8-10 Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 47cc. Fitted directly with the rotor. Rotor with knife type D, very stong made in HARDOX construction plates. Hoses with 2,50 mts. lenght. Strong double frame made with high quality steel (SS355-DOMEX 700). and with special construction to support the excavator weight, when this one need to move it-self, using the mower as a solid point. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TPR OPTIONALS: Top bracket with pins Tools: Y Knifes for grass, bushes and branches max size 7 Cod.ZP Rotore D - standard - 39

40 TFL/R E TFM/R - FORESTRY MOVER FOR SPIDER EXCAVATOR E LINE - FORESTRY MOVERS Flail mower, MIDI-FOREST series, for branches and trees, suitables to SPIDER excavators with weights from 8,0 Ton. up to 15,0 Ton. with power up to 150 hp. max working diameter Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc. Rotor type HD, with mobile strong hammers. Hoses with 2,0 mts. Lenght. Trasmission belts with XPB type. Frontal hood with hydraulic opening system. Strong double frame made with high quality steel (SS355-DOMEX 700),with a cover inside-steel frame made in HARDOX 400 and with special construction to support the excavator weight, when it needs to move it-self, using the mower as strong point. Cutting width Exterior width Weight kg. Excavator weight ton. Flow rate lt/min Pressure set bar Knifes nr. TFL/R TFM/R NOTE: For the operation of the hydraulic cylinder, two 3 / 8 hydr.lines is required OPTIONALS: Top bracket with pins Hammer mono cutting with sharp tungsten Hammer with double cutting Tools: Hammer mono cutting Cod.ZP Rotor HD - standard - Hammer double cutting Cod.ZP REV - optional - Hammer mono cutting with tungsten sharp Cod.ZP 10280MD optional 40

41 F LINE - ATTACHMENTS FOR SHRUB ARMS AND FOR MINI/MIDI-EXCAVATORS SERIES TNA TP-TPC TPCT RF FF HKL TS TR BF/SCH BD 41

42 TNA - FLAIL MOWER FOR GRASS, BRANCHES FOR SHRUB CUTTER ARMS F LINE - ATTACHMENTS Flail mower to cut grass and branches, LIGHT SERIES, suitables to every model of shrub cutter arms, for farmer works Max. working diameter 5/6 Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Rotor with knife type A. 140mm rear adjustable roller. Guards with chains front and rear with rubber. Cutting width Exterior width Weight kg. Flow rate lt/min Pressure set bar Knifes nr. TNA TNA TNA NOTE: The mover are supplied with only the flat iron plat, top bracket on request. Hoses aren t included in the mower price, The hydr.motor, reversible, hasn t the third hose for drain line O Rotor fit on TNA 80 and 100 as standard rotor allow to cut grass and branches until 2 Tools: Multipurpose knifes for grass and bushes. max size 3 Cod.ZP Rotor A - standard - Spatula knifes for grass and bushes max size 3 Cod.ZP Rotor C - optional - Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - optional - Spatula Knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - 42

43 TP/TPC - FLAIL MOWER FOR GRASS, BRANCHES FOR SHRUB CUTTER ARMS F LINE - ATTACHMENTS Flail mower for grass, branches and bushes, medium-heavy series, for PROFESSIONAL WORKS, suitable to every kind of shrub cutter arm. Max. working diameter 7/8 cm Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Rotor with type A. 140 mm rear adjustable roller. TP mower model, has the motor fitted directly with rotor. TPC mower model has the motor fitted in-directly with rotor (Trasmission belts).tpc models are the new 47 cc. piston motor Cutting width Exterior width Weight kg. Flow rate lt/min Pressure set bar Knifes nr. TP TPC TPC TPC NOTE: The mover are supplied with only the flat iron plat, top bracket on request. Hoses aren t included in the mower price, The hydr.motor, reversible, hasn t the third hose for drain line Tools: Multipurpose knifes for grass and bushes. max size 3 Cod.ZP Rotor A - standard - Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - optional - Spatula knifes for grass and bushes max size 3 Cod.ZP Rotor C - optional - Spatula Knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - 43

44 TPCT - FLAIL MOWER FOR GRASS, BRANCHES FOR SHRUB CUTTER ARMS F LINE - ATTACHMENTS Flail mower for branches, bushes and reed, Heavy Series, made for hard works, suitables to shrub cutter arms, with high performance hydraulic system only for professional uses. Max. working diameter 7/8 Steel plat, not painted, to buil the top bracket. Piston motor of 47cc. Rotor with knife type F, built with very strong tube (150x10) in SS335 quality steel. Trasmission belts. Hydraulic frontal opening hood. Cutting width Exterior width Weight kg. Flow rate lt/min Pressure set bar Knifes nr. TPCT TPCT NOTE: The mover are supplied with only the flat iron plat, top bracket on request. Hoses aren t included in the mower price The piston motor, reversible, need a 1/2 dreinage pipe OPTIONALS 56 cc.piston motor Tools: Heavy hammers for runners, bushes, reeds, bushes Diam.max 8 Cod.ZP Rotor G - standard - Knifes for grasses, bushes, reeds max size 6 cm Cod.ZP Rotor F - optional - 44

45 RF - ROTOVATOR ACQUATIC CUTTER FOR SHRUB ARM AND MINI-EXCAVATORS F LINE - ATTACHMENTS -Acquatic special rotovator cutter, for clearing the bottom of watercourse, with flow water, where it need to cut grass, weed, and mill the depth. Very important is the cleaning from the sediment and mud, until 6 every session. Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Floating link made with three big spring who help the machine to follow very weel the depth. and the arm pressure can t overcharging the FF frame. Cutters with fixed knives 45 gear trasmission between the motor and the axel with a very high performance.special seals fitted inside the cutters system, to save the bearings and gears from the water. Working width Weight kg. Flow rate lt/min Pressure set bar RF RF NOTE: The rotovator is supplied with only the flat iron plat, top bracket on request Hoses aren t included in the mower price The Orbital motor, reversible, need a 1/2 dreinage pipe Suggestion: utilize this equipment on shrub arm with cooling system for best performance 56 cc.piston motor 45

46 FF - ROTOVATOR ACQUATIC CUTTER FOR SHRUB ARM AND MINI-EXCAVATORS Acquatic special rotovator cutter, for clearing the bottom of watercourse, with flow water, where it need to cut grass, weed, and mill the depth. Very important is the cleaning from the sediment and mud. F LINE - ATTACHMENTS Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Floating link made with three big spring who help the machine to follow very weel the depth. and the arm pressure can t overcharging the FF frame. Cutters with fixed knives 45 Gear trasmission between the motor and the axel with a very high performance. Special seals fitted inside the cutters system, to save the bearings and gears from the water. FF Working width Variabile da 75 a 125 Weight kg. Flow rate lt/min Pressure set bar NOTE: The rotovator is supplied with only the flat iron plat, top bracket on request Hoses aren t included in the mower price Suggestion: utilize this equipment on shrub arm with cooling system for best performance Working always in opposite direction against current of the watercourse 46

47 HKL - WEED CUTTING BUCKET FOR MIDI-EXCAVATORS F LINE - ATTACHMENTS -Weed cuttin bucket, for clearing the watercourse, from the weed and aquatic grass. During the grasscutting it is possible to charge the cutted vegetation into the bucket, and after the cutting it is possible to discharge the grass or weed on the bank. Steel plat, not painted, to buil the top bracket of the excavator. Hydraulic roller motor of 100cc. Floting system with a special plat in hardened spring steel, HERDER cutting bar system, with strong double finger and strong sections, Working width Weight kg. Flow rate lt/min Pressure set bar HKL HKL HKL NOTE: To be careful to have a pressure not over 160 bar, as indicated in the table, to avoid blade damage. 47

48 TS - TREE SHEARS FOR EXCAVATORS F LINE - ATTACHMENTS Tree shear, TS series, are equipped with an independently operated hydraulic grapple to hold the tree firmly during the whole cutting cycle. TS has a shear opening of 250 to 450 mm. They are suitable to excavators from 4,0 ton To 20,0 ton. Grab to hold the tree. Frame with special construction to save the cabine against the hurts form the branches cutted. Hardened shears. Working width Excavator Ton. Weight kg. Flow rate lt/min Pressure set bar TS TS TS TS OPTIONALS: Turning system for 90, with hydraulic cylinder - turning table, with roller hydraulic motor for turn up to 300 Top bracket with pins NOTE: To cut high trees, it is better to cut the same tree in two three pieces. Remind: tree weight can be too high for some mini-excavators. The working diam., Indicated in the table, has been calculated with soft woods.for hard woods, the working diameter can be less of 15-20%. Hoses aren t included in the price. 48

49 TR - CUTTER EDGE BAR F LINE - ATTACHMENTS The cutter edge bar TR series are used for cutting branches and trees up to 9 Are used on both wings on both brush cutter excavator with weights from 4.0 ton to 10.0 ton. Hardox steel strong cutter bar, safety valve, priority valve for right flow rate. Working width Excavator Ton. Weight kg. Flow rate lt/min Pressure set bar TR TR NOTE: Suggest to avoid overpressure on the circuit, to cause the damage on the blade. 49

50 BF - CUTTER BAR FOR SHEARING HEDGES AND TALL TREES F LINE - ATTACHMENTS Cutter bar with a width of 1.5 meters, for shearing edges, with SCHUMACHER cut system. Max working diametre 1,5 Steel plat, not painted, to buil the top bracket, 150 cc. orbital motor. Working width Weight kg. Flow rate lt/min. Pressure set bar BF/SCH

51 BD - CUTTER WHEELS BAR FOR SHRUB ARMS AND EXCAVATORS F LINE - ATTACHMENTS The cutter wheels bar BD series are suited to the cutting of shrubs, small plants up to a maximum diameter of 10, are applicable on excavators from 4.0 to 20.0 Ton, and also available on shrub arms with professional hydraulic circuit with cooling system. 60 tempered steel discs. Gr.3 gear box motor. Belt transmission between discs. Working width Excavator Ton. Weight kg. Flow rate lt/ min. Pressure set bar Disc nr. BD BD BD BD OPTIONALS: Top bracket with pins for excavator Top bracket with pins for shrub arm 51

52 G LINE - BRUSH MOWER ATTACHMENTS FOR SKID STEER AND LOADERS SERIES SS-CL SS-TFF SS/TFF-UX 52

53 SS/CL - BRUSH MOVER ATTACHMENT FOR SKID STEER AND LOADERS G LINE - BRUSH MOVER ATTACHMENTS Mover for herbs and shrubs, with rotor blades, chopping up to 7 to skid and loader with powers from 45 to 100 HP. Quick floating linkage. Front hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and counter blades. Cast iron gear motor. Rotor with kinfe type F. Single belt transmission.hoses with 2,0 mts. Lenght ( without the quick couplings) 170mm rear adjustable roller. Working widt Exterior width Weight kg. Power HP flow rate lt/ min. Pressure set bar Knifes nr. SS/CL SS/CL SS/CL NOTE: Type B rotor or C for SS/CL 125 (without extra charge) Type G rotor or F for SS/CL 160 e 190 (without extra charge) Tools: Spatula knifes for grass and bushes max size 5 Cod.ZP Rotor C - optional - Knifes for grasses, bushes, reeds max size 6 cm Cod.ZP Rotor F - optional - Heavy hammers for runners, bushes, reeds, bushes Diam.max 8 Cod.ZP Rotor G - optional -- Y Knifes for grass, bushes and branches. Diam.max 4 Cod.ZP Rotor B - standard - 53

54 SS/TFF- FORESTRY MOVER ATTACHMENT FOR SKID STEER AND LOADERS G LINE - BRUSH MOVER ATTACHMENTS Mover for herbs and shrubs, with retractable rotor hammers, chopping up to 20 for skid with hydraulic high flow with power from 70 to 130 HP. Hydraulic front hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and double counter blades. Piston motor of 56cc. Rotor type HD with mobile hammer. Single belt transmission. Hoses with 2,0 mts. lenght ( without quick release couplings) Working widt Exterior width Weight kg. Power HP flow rate lt/ min. Pressure set bar Knifes nr. SS/TFF SS/TFF SS/TFF OPTIONALS: Pushing frame 64 cc. Piston motor Antishock valve Tools: Hammer mono cutting Cod.ZP Rotor HD - standard - Hammer double cutting Cod.ZP REV - optional - Hammer mono cutting with tungsten sharp Cod.ZP 10280MD optional 54

55 SS/TFF-UX - TRINCIATRICE FORESTALE PER MINI PALE E SKID STEER LOADER G LINE - BRUSH MOVER ATTACHMENTS Forestry mower, for bushes, branches and small trees, to cut up max. diameter of 25 cm, for skid steer, with hydraulic system at high performance and high oil flow, with power from 80 hp to 140 hp. Hydraulic front hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and double counter blades. Piston motor of 56cc. Rotor type HD with mobile hammer. Single belt transmission. Hoses with 2,0 mts. lenght ( without quick release couplings) Working widt Exterior width Weight kg. Power HP flow rate lt/ min. Pressure set bar Knifes nr. SS/TFF UX SS/TFF UX SS/TFF UX OPTIONALS: Pushing frame Antishock valve Tools: Fixed Tools with strong teeths (carbide insert) Cod.UX 285 X200 Rotor - standard - 55

56 H LINE - MOWING BOATS SERIES S1F MF 56

57 PRODUCTS S1F - ROTO MILLING CUTTER BOAT H LINE - MOWING BOATS The roto milling cutter boat OSMA, S1F series, are boats turned to the use of maintenance of channels and courses water. The powerboat S1F is suitable for the cleaning of the irrigated channels. This type of job, allows to eradicate all the aquatic grasses that are present on the fund, besides they reduce notably the presence of deposits, sediments and other. Electronic dashboard with errors signals control and maintenance system flashlights.operator station with ergonomic seat Designed for comfort, simple and easy operation, allows the operator to focus on production. Helix LINE adjustable hydraulically in height and direction, motor and place guide covers against vandal actions. Internal boat chambers for total safety. Working deep Working width Boat lenght mt. HP Power Weight kgs. floatage level with 1 person S1F S1F S1F OPTIONALS: Front mover fitted on hydraulic orientable boom 100 HP Diesel Engine (only S1F 220) Radio controls FEATURES: Electronic dashboard with maintenance system flashlight - standard - Hydraulic front movers std on S1F

58 PRODUCTS MF - WEED CUTTING BOAT H LINE - MOWING BOATS The weed MOWING BOATS OSMA, series MF, are boats turned to the use of maintenance of channels and courses water. The boat MF is suitable for the cutting and cleaning jobs in the irrigated channels. This type of works, allows to easily cut the whole present vegetation on the shores of the channels without damaging the fund of the same with rapidity and safety, Electronic dashboard with errors signals control and maintenance system flashlights.operator station with ergonomic seat Designed for comfort, simple and easy operation, allows the operator to focus on production. Helix LINE adjustable hydraulically in height and direction, motor and place guide covers against vandal actions. Internal boat chambers for total safety. Working deep Working width Boat lenght mt. HP Power Weight kgs. floatage level with 1 person MF MF MF OPTIONALS: Scafo in acciaio inox antiusura e anticorrosione Motore 100 HP (solo MF 500) Radiocomando FEATURES: Electronic dashboard with maintenance system flashlight - standard - Double directional helix system- standard only on MF500-58