Flail Mulching Mowers For Agriculture and Groundcare PRICE LIST 1 ST NOVEMBER 2017

Transcription

1 Flail Mulching Mowers For Agriculture and Groundcare PRICE LIST 1 ST NOVEMBER 2017

2 Flail Mowers Product Range Overview 2 Retail prices excluding VAT November 2017

3 Table of Contents Type Working width For tractors of (HP) Mounting Page Front or Rear Mounting MU-B cm Pedestrian mower F 4 MU-C cm R 6 MU-FM cm F 8 MU-FM Hydro cm ltr oil-flow F 10 MU-E cm F + R 12 MU-ECOTOP cm R 14 MU-H cm F + R 16 MU-L cm F + R 18 MU-M cm F + R 20 MU-Pro cm F + R 22 MU-M 600/F 600 cm R 24 MU-Pro/F Vario 860cm F+R Hydraulic 26 folding MU-Farmer cm R 44 MU-Farmer cm F 44 MU-Farmer 670 cm R 46 MU-Farmer/S 420 cm R 48 Rear and Side multi-purpose MU-FM/S cm R 30 MU-H/S cm R 34 MU-L/S cm R 36 MU-PRO/S 250 cm R 42 Verge Mowers MU-C/S cm R 28 MU-E/S cm F + R 32 MU-L/VS cm R 38 MU-M/S cm R 40 MU-W cm F + R 50 Flail mowers for orchards + vineyards All horsepower ratings are related to the PTO output. Data sheet for Tractors 56 Flails 59 Flail Mowers for Solar Power Plants 58 Hydraulic Weight Transfer MU-SOFA 57 Roller bearing "Starinth" 55 All Flails according to CE regulations Copyright 2011 by Müthing GmbH & Co. KG Soest Retail prices excluding VAT November

4 Flail Mowers MU-B Front Mounting for Pedestrian Mowers Standard Equipment Manufactured from High Quality QSt/E Steel for Front mounting on to Pedestrian Mowers. Gearbox with integrated security braking system. Automatic belt tensioning. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear. Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment. High tempered spring steel one way protection flaps in front of the mower hood. Wearing skids. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. Specially designed linkage parts for easy mounting on to pedestrian mowers Adaptor for AEBI or Reform or Rapid or Agria and Koppl Hood wear plate (Delivery time to be asked for). Additional carbide wearing skids, removable (Delivery time to be asked for). Alternative rotor system with pairs of 2 back to back flails (Delivery time to be asked for). TUV Certificate on request 4 Retail prices excluding VAT November 2017

5 Flail Mowers MU-B Front Mounting for Pedestrian Mowers Model Retail price MU-B 100 Front mounted inc. Linkage parts 4, MU-B 120 Front mounted inc. Linkage parts 4, MU-B 140 Front mounted inc. Linkage parts 4, Hood Wear plate (factory mounted) Carbide wearing skids, removable Rotor with pairs of 2 back to back Flails for MU-B 100 (78 flails in total) Rotor with pairs of 2 back to back Flails for MU-B 120 (92 flails in total) Rotor with pairs of 2 back to back Flails for MU-B 140 (106 flails in total) Technical Data Model WW Overall width Weight No. of flails cm cm kg MU-B MU-B MU-B Retail prices excluding VAT November

6 Flail Mower MU-C Front or Rear mounted For Compact Tractors up to 35 HP Standard Equipment Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting. Rear mounting: Gearbox with integrated over run clutch for 540 / r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm) Front mounting: Low positioned gearbox with integrated over run clutch for r.p.m. (2.000 r.p.m. possible as option) (distance of the ground to P.T.O. shaft cc. 25 cm) Belt protection with tension measuring slot Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear. Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment. High tempered spring steel one way protection flaps in front of the mower hood. Skids. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin, P.T.O. shaft. Head stock for A-Frame triangle Cat. 0 for Front mounting in combination with gearbox with integrated over run clutch for 1,000/ 2,000 r.p.m. mounted in front of the hood. Special Carbide wearing skids, removable (Rear mounting only). Height adjustable rubber wheels, 360º swivel in front of the Flail. Hydraulic Weight Transfer MU-SOFA, for front mounted machines recommended. TUV Certificate on request Hydraulic version available POA 6 Retail prices excluding VAT November 2017

7 Flail Mower MU-C Front or Rear mounted For Compact Tractors up to 35 HP Order number Model Retail price MUC MU-C Rear mounted 3, MUC MU-C Rear mounted 3, MUC MU-C Rear mounted 3, MUC MU-C Rear mounted 3, MUC MU-C Rear mounted 3, MUC MU-C Front mounted 3, MUC MU-C Front mounted 3, MUC MU-C Front mounted 3, MUC MU-C Front mounted 3, MU-C Iseki MU-C Front mounted Iseki inc wheels 4, MUCZ A-Frame triangle Cat.0 for Front mounting MUCZ point linkage parts to Front Mowers MUCZ Height adjustable rubber wheels, MUZ Second patented shredding bar "Shark fin" MUCZ041 Hood Wear plate (factory fitted) MUCZ020 Modification 540 to r.p.m MU-SOFA Hydraulic Weight Transfer For Front mounting please state on a copy of the data sheet on page 56 the driving direction of the Front P.T.O. (seen from behind to left or right rotation) as well as the R.P.M., size and model of the P.T.O. shaft. When Front mounting please pay attention to the permitted Maximum Tractor Front Axle Load! Technical Data Model WW Overall width max. Tractor HP Weight No. of flails cm cm 540 r.p.m. kg front/rear MU-C / 35 / MU-C / / MU-C / / MU-C / / MU-C / / Retail prices excluding VAT November

8 Flail Mower MU-FM Out front Flail for Front Mowers up to 40 HP Standard Equipment Manufactured from High Quality QSt/E Steel for Front mounting onto professional Front Mowers with 2 point linkage. Linkage designed for high lift to clear kerbs. Gearbox mounted to the rear of the hood complete with integrated over run clutch for 2,000-2,500 r.p.m. Belt protection with tension measuring slot. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment. Easy to use variable height adjustment. Wearing skids. High tempered spring steel one way protection flaps in front of the mower. Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. P.T.O. shaft. A frame Cat. 0. Second patented removable shredding bar System: Shark fin. Special speed ratio for Kubota please order for Kubota 4 wheel in lieu of Rear roller TUV Certificate on request 8 Retail prices excluding VAT November 2017

9 Flail Mower MU-FM Out front Flail for Front Mowers up to 40 HP Order number Model Retail price MUFM MU-FM 140 Out front Flail inc. 2 point tractor linkage 4, MUFM MU-FM 160 Out front Flail inc. 2 point tractor linkage 5, point tractor Linkage parts MUFMZ060 MU-FM Mounting parts for KUBOTA F2560/3060/3560 MUFMZ065 Special Linkage parts for KUBOTA Series 2006 Type 2880 & F3680,F2890,F3090,F3890 Special speed ratio - for Kubota necessary MUFMZ061 MU-FM Linkage parts for JOHN-DEERE - F 1435, 1445, 1545 and 1565,1550,1570,1580,1585 MUFMZ064 MU-FM Linkage parts for JOHN-DEERE - F 1145 MUFMZ062 MU-FM Linkage parts for ISEKI - SF 300, 303, , 333, 370 MUFMZ063 MU-FM Linkage parts for SHIBAURA - CM 284, 314, 364, 374 and New Holland MC. MUFMZ016 A frame Cat MUFMZ046 Second patented removable shredding bar System: Shark fin. MUFMZ045 Hood Wear Plate ( factory fitted ) MU-FMZ039 4 wheel version in lieu of rear roller additional Technical Data Model WW Overall width max. Tractor HP Weight No. of flails cm cm 2200 r.p.m. kg * MU-FM MU-FM * Weight including linkage parts and height adjustable rubber wheels in front Retail prices excluding VAT November

10 Flail Mower MU-FM Hydro Front Flail Mower with Hydraulic Drive Standard Equipment Manufactured from High Quality QSt/E Steel for Front mounting to Skid steer Loaders and Multi-Purpose Tractors, Hydraulic drive with over run valve (min 32 l oil flow with 180 bar oil pressure required). Belt protection with tension measuring slot. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment. Easy to use variable Height adjustment. High tempered spring steel one way protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller as well as the linkage parts with wide swivelling range guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and a removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. Hydraulic spool valves required: Flow and return, recirculation with free flow pipe. Hydraulic hoses (skid steer loader side connectors not included). Strong, height adjustable rubber wheels 360º swivel in front of the flail. A frame Cat. 0. Hydraulic control system for oil volumes over 48 l/min. Second patented removable shredding bar System: Shark fin. TUV Certificate on request 10 Retail prices excluding VAT November 2017

11 Flail Mower MU-FM Hydro Front Flail Mower with Hydraulic Drive Order number Model Retail price MUFM Hydro MU-FM Hydro 140 4, MUFM Hydro MU-FM Hydro 160 5, Ransomes Fitting kit Via Ransomes Toro Fitting kit Via Muthing Technical Data Model WW Overall width Weight No. of flails cm cm kg * MU-FM Hydro MU-FM Hydro * Weight including linkage parts and height adjustable rubber wheels in front Please pay attention to the maximum permitted Front-Axle Load! Retail prices excluding VAT November

12 Flail Mower MU-E Vario Front or Rear mounted For Compact and Multi-Purpose Tractors up to 60 HP Standard Equipment Version A: (Front or Rear mounting Cat. I. Height of P.T.O. connection: cc. 55 cm) Specially designed Headstock Cat. I for Front or Rear mounting, with mechanical side shift; MU-E : 20 cm; MU-E : 30 cm. Gearbox with integrated over run clutch and through drive for 540 / r.p.m. centred on top. Version B: (Front mounting Cat. 0. Height of P.T.O. connection: cc. 38 cm) Headstock for A Frame triangle Cat. 0 for Front mounting. Low mounted Gearbox with integrated over run clutch for / r.p.m. Belt protection with tension measuring slot, P.T.O. shaft. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and bearings protected against dirt, wear and tear. Roller adjustable to different heights. Wearing skids, High tempered spring steel one way protection flaps in front, P.T.O shaft. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and a removable Shark Fin shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Shiftable Headstock Cat. I for version B (Replacing head stock for A Frame triangle Cat. 0). Hydraulic side shift version A only. Second patented removable shredding bar System: Shark fin. Strong, height adjustable rubber wheels, 360º swivel in front of the flail. Hood Wear plate (additional weight around up to 35 kg (200 cm)). Special Carbide wearing skids, removable (Delivery time to be asked for). Hydraulic Weight Transfer MU-SOFA, for front mounting machines recommended. Hydraulic version available POA TUV Certificate on request 12 Retail prices excluding VAT November 2017

13 Flail Mower MU-E Vario Front or Rear mounted with Headstock Cat I For Compact and Multi-Purpose Tractors up to 60 HP Order number Model Retail price Version A: Front or rear mounting Cat. I MUE MU-E 140 with Headstock Cat. I 5, MUE MU-E 160 with Headstock Cat. I 5, MUE MU-E 180 with Headstock Cat. I 5, MUE MU-E 200 with Headstock Cat. I 5, Version B: Front mounting Cat. 0 MUE MU-E 140 with A frame Cat. 0 5, MUE MU-E 160 with A frame Cat. 0 5, MUE MU-E 180 with A frame Cat. 0 5, MUEZ Shiftable Headstock Cat. I for Version B MUEZ003 Hydraulic side shift (MU-E Version A) MUEZ Second patented removable shredding bar System: Shark fin MUEZ041 Hood wearing plate (factory mounted) MUEZ Special Carbide wearing skids, removable MUEZ Height adjustable rubber wheels, 360º swivel in front of the flail MU-SOFA Hydraulic Weight Transfer for front mounting machines recommended MUEZ020 Modification or r.p.m MU-EZ042 Adjustable cutting Vario Bar Hydraulic versions available please ask Technical Data Model WW Overall width max. Tractor HP Weight No. of flails cm cm 540 U/min U/min. kg MU-E MU-E MU-E MU-E Retail prices excluding VAT November

14 Flail Mower MU-ECOTOP Rear mounted for Tractors up to 75 HP Standard Equipment Headstock Cat. I + II for Rear mounting. Mountable in two positions variable by 30cm. Gearbox with integrated over run clutch and through drive 540 r.p.m. or r.p.m. Belt protection with tension measuring slot. Stand. High tempered M Hammer flails. Smooth running Spiral rotor with specially formed lugs. Patented removable shredding bar System: Shark fin. Roller to carry the mower, adjustable for different heights. Side wearing skids. High tempered spring steel one way protection flaps in front of the mower. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. P.T.O. shaft. Warning signs and lights (dealer fit). TUV Certificate on request. 14 Retail prices excluding VAT November 2017

15 Flail Mower MU-ECOTOP Rear mounted for Tractors up to 75 HP Order number Model Retail price MU-Ecotop MU-Ecotop 160 4, MU-Ecotop MU-Ecotop 180 5, MU-Ecotop MU-Ecotop 200 5, MUHZ020 Modification 540 to 1000 r.p.m MUXZ030 Warning signs and lights (dealer fit) Technical Data Model WW Overall width max. Tractor HP Weight No. of flails cm cm 540 r.p.m r.p.m. kg MU-Ecotop MU-Ecotop MU-Ecotop Retail prices excluding VAT November

16 Flail Mower MU-H Vario Front or Rear mounted for Tractors up to 90 HP Standard Equipment Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MU-H 160: 40 cm; MU-H : 56 cm. Gearbox with integrated over run clutch and through drive for 540 / r.p.m. Belt protection with tension measuring slot. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller with internal bearings and rounded edges to preserve the soil and turf and to carry the flail, adjustable for different heights, Wearing skids. High tempered spring steel one way protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin, P.T.O. shaft. Fixed Headstock Cat. I + II for Front or Rear mounting, mountable in different positions. Front and Rear Headstock Cat. I + II (shiftable or fixed mounted), Stand. Central mounting MUH 180, 200, 220. Hydraulic Weight Transfer MU-SOFA, for front mounting machines recommended. Hydraulic side shift (1 double acting spool valve required). Special Headstock Cat. I (for tractors like Reform, Aebi, etc.) Hood Wear plate (Delivery time to be asked for). Additional Carbide wearing skids, removable (Delivery time to be asked for). Second patented removable shredding bar System: Shark fin. Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). Adjustable cutter bar. Hydraulic version available POA TUV Certificate on request 16 Retail prices excluding VAT November 2017

17 Flail Mower MU-H Vario Front or Rear mounted for Tractors up to 90 HP. Order number Model Retail price MUH MU-H 160 Headstock with side shift 6, MUH MU-H 180 Headstock with side shift 6, MUH MU-H 200 Headstock with side shift 6, MUH MU-H 220 Headstock with side shift 6, MULZ Front and Rear Headstock shiftable MUHZ035 Shock-absorbing Linkage springs for Front-Mounting MUHxxx-31 Central mounting (Delivery time to be asked for) MUHZ003 Hydraulic side shift (MU-H ) MULZ Special Head-Stock Cat. I MUHZ020 Modification 540 to r.p.m MUXZ030 Warning signs and lights (dealer fit) MUHZ041 Hood Wear plate (factory mounted) MUHZ045 Carbide wearing skids, removable MULZ042 Adjustable Vario cutter bar MUXZ040 Working hours meter with electronic sensor MUHZ Rotor with 3 back to back-flails MUHZ Rotor with M Shackle Flails MU-SOFA Hydraulic Weight Transfer tractor kit MUXZ035 Tree mower with hydraulic drive (rear mounting 3, only, fitting kit included ) Technical Data WW Overall width max. Tractor HP Weight No. of flails No. of flails cm cm 540 r.p.m r.p.m. kg Hammer M Shackle Retail prices excluding VAT November

18 Flail Mower MU-L Vario Front or Rear mounted for Tractors up to 130 HP Standard Equipment Manufactured from High Quality QSt/E Steel with multi position Headstock Cat. I + II for Front or Rear mounting with mechanical side shift; MU-L : 56 cm (as shown) Gearbox with integrated over run clutch and through drive for 540 / r.p.m. Belt protection with tension measuring slot. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Pivoting Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the mulcher, adjustable to different heights; Wearing skids, High tempered spring steel one way protection flaps in front. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Patented removable shredding bar System: Shark fin, P.T.O. shaft. Adjustable cutting bar. Fixed Headstock Cat. I + II for Front or Rear mounting, mountable in different positions. Front and Rear Headstock Cat. I + II (shiftable or fixed mounted), Stand, Central mounting. Shock absorbing linkage springs for (Front-Mounting recommended). Hydraulic Weight Transfer MU-SOFA, for front mounting machines recommended. Hydraulic side shift (1 double acting spool valve required). Special Headstock Cat. I (for special tractors like Reform, Aebi, Rasant etc.) Height adjustable rubber wheels, 360º swivel with adjustable width for rear mounting (replacing the roller or in addition to the roller). Scraper for roller in rear position Warning signs and lights (dealer fit). Hood Wear plate (Delivery time to be asked for). Additional Carbide wearing skids, removable (Delivery time to be asked for). Second patented removable shredding bar System: Shark fin. Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 18 Retail prices excluding VAT November 2017

19 Flail Mower MU-L Vario Front or Rear mounted for Tractors up to 130 HP Order number Model Retail price MUL MU-L 180 Headstock with side shift 7, MUL MU-L 200 Headstock with side shift 7, MUL MU-L 220 Headstock with side shift 7, MUL MU-L 250 Headstock with side shift 7, MUL MU-L 280 Headstock with side shift 8, MULZ Front and Rear Headstock shiftable MUMZ035 Shock-absorbing Linkage springs (for Front-Mounting recommended) MU-SOFA Hydraulic Weight Transfer (see page 57) for front mounting machines recommended MULxxx-31 Central mounting 220,250, MUHZ003 Hydraulic side shift (MU-L ) (56cm range) MUHZ016 Second patented removable shredding bar MULZ042 Adjustable Vario cutter bar MULZ Special Headstock Cat. I MUHZ020 Modification 540 to r.p.m MUXZ030 Warning signs and lights ( dealer fit ) MULZ041 Hood Wear plate (factory mounted) MULZ045 Carbide wearing skids, removable MUXZ035 Tree mower with hydraulic drive (fitting kit included) 3, MULZ046 Scraper for roller in rear position MUXZ040 Working hours meter with electronic sensor MULZ Rotor with 3 back to back Flails MULZ Rotor with M Shackle Flails Technical Data WW Overall width max. Tractor HP Weight No. of flails No. of flails cm cm 540 r.p.m r.p.m. kg Hammer M Shackle Retail prices excluding VAT November

20 Flail Mower MU-M Vario Front and Rear mounted for Tractors up to 160 HP Standard Equipment Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat. II for front and rear mounting. Hydraulic side shift: cc. 56 cm (1 double acting spool valve required). Gearbox with integrated over run clutch and through drive for r.p.m. Automatic belt tensioning. High tempered M Hammer flails with self-sharpening cutting edge to ensure a clean cut and maximum shredding using less power. Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Large pivoting self-cleaning roller to carry the flail mower, adjustable for different heights. Wearing skids. Stand. P.T.O. shaft. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. Adjustable cutting bar Shock absorbing linkage springs (for Front Mounting recommended). Hydraulic Weight Transfer MU-SOFA, for front mounting machines recommended. Central mounting for MUM 250 and 280 (Delivery time to be asked for). Second patented removable shredding bar System: Shark fin. Hood Wear plate (Delivery time to be asked for). Warning signs and lights (dealer fit). Scraper for roller in rear position Mountings for Warning signs and lights to be mounted on Front and Rear Headstock Cat.II Heavy P.T.O. shaft. Height adjustable rubber wheels with fixed axle. Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 20 Retail prices excluding VAT November 2017

21 Flail Mower MU-M Vario Front and Rear mounted for Tractors up to 160 HP Order No. Model Retail Price MUM MU-M 220 with Front and Rear Headstock 9, MUM MU-M 250 with Front and Rear Headstock 10, MUM MU-M 280 with Front and Rear Headstock 10, MUM MU-M 300 with Front and Rear Headstock 10, GE2501 Heavier P.T.O. shaft MU-PROZ016 Second patented removable shredding bar System: Shark fin MUMxxx-41 Central mounting 280 (Check Delivery time) MUMZ042 Adjustable Vario cutting bar MUMZ035 Shock absorbing Linkage springs (for Front Mounting recommended) MU-SOFA Hydraulic Weight Transfer (see page 57) for front mounting machines recommended MU-MZ041 Hood Wear plate (factory mounted) MU-MZ046 Roller Scraper in rear position MU-PROZ031 Height adjustable rubber wheels with fixed axle (instead of roller) MUXZ030 Warning signs and lights (dealer fit) MUXZ040 Working hours meter with electronic sensor MUMZ Rotor with 3 back to back Flails MUMZ Rotor with "M" Shackle Flails Technical data Model WW Overall max. Tractor HP Weight No. of flails cm Width (cm) r.p.m. kg Hammer MU-M MU-M MU-M , MU-M , Retail prices excluding VAT November

22 Flail Mower MU-Pro Vario Front and Rear mounted for Tractors up to 220 HP Standard Equipment Heavy duty Flail Mower for professional use manufactured from High Quality QSt/E Steel with multi position Headstock: Cat. II + III for front and rear mounting with hydraulic side shift cc. 56 cm (1 double acting spool valve required). Heavy duty gearbox with integrated over run clutch and through drive for r.p.m. Automatic belt tension adjustment. High tempered M Hammer flails with self-sharpening cutting edge to ensure a clean cut and maximum shredding using less power. Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Specially formed side skids with removable wearing skids. Large pivoting self-cleaning roller (Ø 244 mm) to carry the flail mower, adjustable for different heights. High tempered one way spring steel protection flaps in front of the mower hood. Stand. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and the removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin, Heavy P.T.O. shaft. Adjustable cutting bar Centre mounted Headstock and gear box for (Delivery time to be asked for). Shock absorbing linkage springs (for Front-Mounting recommended). Shock absorbing linkage springs (for Front-Mounting recommended). Hydraulic Weight Transfer MU-SOFA, for front mounting machines recommended. Second patented removable shredding bar System: Shark fin. Hood Wear plate (Delivery time to be asked for). Height adjustable rubber wheels, fixed axle with track 1.90 m. Rear roller scraper beam adjustable with roller in rear position Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 22 Retail prices excluding VAT November 2017

23 Flail Mower MU-Pro Vario Front or Rear mounted for Tractors up to 220 HP Order No. Model Retail Price MUPRO MU-Pro 250 with Front and Rear Headstock 11, MUPRO MU-Pro 280 with Front and Rear Headstock 12, MUPRO MU-Pro 300 with Front and Rear Headstock 12, MUPRO MU-Pro 320 with Front and Rear Headstock 13, MUPROxxx-41 Central mounting 280 (Check Delivery time) MUMZ042 Adjustable Vario cutting bar MU-PROZ016 Second patented removable shredding bar. Shark fin MUMZ035 Shock absorbing Linkage springs. Front Mounting MU-SOFA Hydraulic Weight Transfer (see page 57) MU-PROZ041 Hood Wear plate (factory mounted) MU-PROZ046 Roller Scraper in rear position MU-PROZ031 Height adjustable rubber wheels. Instead of Roller MUXZ030 Warning signs and lights (dealer fit) MUXZ040 Working hours meter with electronic sensor MUPROZ Rotor with 3 back to back Flails MUPROZ Rotor with "M" Shackle Flails Technical Data Model WW Overall max. Tractor HP Weight No. of flails cm Width (cm) r.p.m. kg Hammer MU-Pro , MU-Pro , MU-Pro , MU-Pro , Retail prices excluding VAT November

24 Flail Mower MU-M600F Vario Rear mounted Hydraulic Folding for Tractors up to 250hp Standard Equipment Manufactured from High Quality QSt/E Steel, hydraulic folding with three point linkage Cat II +III. Large patented rear rollers with the option to discharge the material before or after and to adjust height Gearbox with integrated over run for rpm. Automatic belt tension. Hood Wear plates. Hydraulic transport lock at an angle of 90 degrees High tempered M" Hammer Flails. Smooth running rotor with specially shaped, spirally arranged blade holders Patented removable shredding bar System: Shark fin Carbide wear skids, replaceable. High tempered one way spring steel protection flaps in front of the mower hood Purposely designed hood in conjunction with high rotor and cutting speeds and the removable shredding bar spreads the shredded material evenly behind the mower giving an excellent Mulching and Shredding Quality Hydraulic connection requirements: 2 single acting Heavy Duty PTO shaft with cap bottom lubrication Set of warning signs / lighting LED mounted Second patented removable shredding bar System: Shark fin 4 wheels 23x , 360 rotating with mechanical height adjustment. Hydraulically driven central mower. Hydraulic Requirements: 1 Single Acting and 1 x free return for the drain line directly into the oil tank (Delivery time on request) Working Hour Meter TUV Certificate on request 24 Retail prices excluding VAT November 2017

25 Flail Mower MU-M600F Vario Rear mounted Hydraulic Folding for Tractors up to 250hp Order No. Model Retail Price MU-M MU-M 600/F Vario with rollers 34, MU-M MU-M 600/F Vario with wheels 36, MU-PROZ016 Second patented removable shredding bar System: Shark fin. 2 of them Required MU-MZ042 2x300 Adjustable Vario cutter bar MU-MZ062 2x300 Scraper bar for roller MU-MZ060 Hydraulic Driven Central Mower 3, MUXZ040 Working hours meter with electronic sensor Technical Data Model WW Overall max. Tractor HP Weight No. of flails cm Width (cm) r.p.m. kg MU-M 600/F , Retail prices excluding VAT November

26 Flail Mower MU-Pro/F Vario Rear mounted Hydraulic Folding for Tractors up to 400hp Standard Equipment The complete unit is comprised of the MU-PRO/F 860 Vario and MU-PRO 280 Vario (centrally mounted) as a front mounted unit Manufactured from fine grain steel S700MC for a low dead weight combined with high strength Gear box with freewheel and through drive for 1000 rpm for Tractors to up to 400 hp Automatic belt tensioning High tempered M Hammer flails to ensure clean cut and maximum shredding using less power 2 smooth running rotors with specially formed blade holders arranged in a spiral pattern Patented removable shredding bar System: "Shark fin" Wear insert within the hood (factory mounted) We recommend the MU-SOFA weight transfer system for the Front Mower. (Standard in the rear) Large patented swivelling support rollers with the option of discharging the mulch either behind or in front of the roller and for adjusting the working height. Robust Starinth rear roller bearing system (see page 55) Carbide wearing skids, removable High tempered one way spring steel protection flaps in front of the mower hood 4 support legs for space saving storage in the transport position Heavy duty PTO shaft with hardened inner tube and cap bottom lubrication Warning signs with LED lighting equipment for front and rear mounting (5 m cable is included) Adjustable Vario cutting bar for adjusting the shredding rate Second patented removable shredding bar System: "Shark fin" Cleaner cutting edge for displaced support roller Operating hours counter with sensor, time recording via angular momentum Separate lifting on left and right 26 Retail prices excluding VAT November 2017

27 Flail Mower MU-Pro/F Vario Rear mounted Hydraulic Folding for Tractors up to 400hp Order No. Model Retail Price MU-Pro MU-Pro/F Vario rear mounted hydraulic folding 43, MU-MZ042 Adjustable Vario shredding Bar (2x 320) MU-PROZ046.1 Scraper Bar MU-PROZ016 2x320 Second patented removable shredding bar system " Shark Fin" MU-XZ040 Operating Hours clock MU-PROFZ060 Separate lifting on left and right Front Mower able for use solo or rear-mounted MU-PRO MU-PRO 280 Vario central mounted 12, MU-MZ035 Shock absorbing linkage springs required MU-SOFA MU-SOFA weight transfer system, MU-MZ042 Adjustable Vario cutting bar 149,00 MU-PROZ046.1 Scraper bar for displaced support roller Retail prices excluding VAT November

28 Flail Mower MU-C/S Side Flail Mower with fixed Offset Headstock for Tractors up to 35 HP Standard Equipment Manufactured from High Quality QSt/E Steel with Headstock Cat. I for rear mounting. Fixed off set mounting (60 cm from centre of the tractor P.T.O.) for working near to the tractor, hood can be swivelled vertically. Working angle of Mulching Head 90 up to 45 down. Gearbox with integrated over run clutch for 540 r.p.m. Belt protection with tension measuring slot. Hydraulic transport safety lock at an angle of 90 with shut off tap, (1 double acting spool valve required). Stand. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Roller with well rounded edges to preserve the soil and turf and to carry the mulcher, adjustable to different heights. High tempered one way spring steel protection flaps in front of the mower hood. Wearing skids. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. P.T.O. shaft. Modification from one double acting hydraulic connector to one single acting hydraulic connector for lifting and lowering the mulching head. TUV Certificate on request 28 Retail prices excluding VAT November 2017

29 Flail Mower MU-C/S Side Flail Mower with fixed offset Headstock for Tractors up to 35 HP Order No. Model Retail Price MU-C/S MU-C/S - fixed side mounted 5, MU-C/S MU-C/S - fixed side mounted 5, MU-C/SZ Modification for single acting Hydraulics MU-C/SZ Carbide wear skids removable Technical Data Model WW max tractor HP Weight No. Of flails cm 540 r.p.m. kg MU-C/S MU-C/S Retail prices excluding VAT November

30 Multi Purpose Flail Mower MU-FM/S Rear and side multi-purpose Flail Mower for Tractors up to 45 HP Standard Equipment Manufactured from High Quality QSt/E Steel with Headstock Cat. I for Rear mounting. Hydraulic parallelogram side shift: 112 cm Overall working range: up to 272 cm (see chart) Working angle 90 up to 60 down. Gearbox with integrated over run clutch for 540 r.p.m. Belt protection with tension measuring slot. Patented Safety Mechanical Break Away System. Hydraulic transport safety lock at an angle of 90 with shut-off tap, (2 double acting spool valves required, at least one with floating position). High tempered Shackle M Carbide flails Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and Internal bearings protecting against dirt, wear and tear. Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark fin spreads the shredded material evenly behind the roller giving an Excellent Mulching and Shredding Quality. Roller with well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. Wearing skids High tempered one way spring steel protection flaps in front of the mower hood. Stand. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. P.T.O. shaft with cap bottom lubrication. Hood Wear plate (Delivery time to be asked for). Second patented removable shredding bar System: Shark fin. Working hours meter with electronic sensor TUV Certificate on request. 30 Retail prices excluding VAT November 2017

31 Multi Purpose Flail Mower MU-FM/S Rear and side multi-purpose Flail Mower for Tractors up to 45 HP Order No. Model Retail Price MU-FM/S MU-FM/S c/w safety Mechanical Break Away 6, MU-FM/S MU-FM/S c/w safety Mechanical Break Away 6, MU-FM/S MU-FM/S c/w safety Mechanical Break Away 7, MU-FMSZ041 Hood Wear plate (factory fitted) MU-FMZ Second patented shredding bar System "Shark Fin" MUXZ040 Working hours meter with electronic sensor MULSZ090 Electro Hydraulic Controls D/A spool or 1 single with free flow return required Technical Data Model WW max tractor HP Weight No. Of flails Min Tractor cm 540 r.p.m. kg weight MU-FM/S ,000 MU-FM/S ,100 MU-FM/S ,200 Working Ranges MU-FM/S The stated measurements are approximate and may vary according to different tractors. C Working Width in cm Shifting Range to the A Right in cm Shifting Range to the B Left in cm Transport Length C Backwards in cm Overall Working Width incl. D Machine Width A B D Retail prices excluding VAT November

32 Flail Mower MU-E/S Vario Side Flail Mower for Rear or Front mounting for Tractors up to 60 HP Standard Equipment Manufactured from High Quality QSt/E Steel with Headstock Cat. I + II for rear mounting. Hydraulic side shift 50 cm (Inner edge of Mulching Head in between 90 cm to 140 cm from the centre of the Tractor P.T.O. to the outside). Working angle of Mulching Head 90 up to 60 down. Gearbox with integrated over run clutch for 540 r.p.m. or r.p.m. Hydraulic transport safety lock at an angle of 90 with shut-off tap. (2 double acting spool valves required, at least one with float position). Belt protection with tension measuring slot. Mechanical Break Away System. Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin. Roller with well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. Wearing skids. High tempered one way spring steel protection flaps in front of the mower hood. Stand. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. P.T.O. shaft. Left or right hand build (Check availability). Front and Rear Headstock with Mechanical Break Away System. Hood Wear Plate (Delivery time to be asked for). Second patented removable shredding bar System: Shark fin. Additional Carbide wearing skids, removable. TUV Certificate on request 32 Retail prices excluding VAT November 2017

33 Flail Mower MU-E/S Vario Side Flail Mower for Rear or Front mounting for Tractors up to 60 HP Order No. Model Retail Price MU-E/S MU-E/S 120 Headstock with side shift 7, MU-E/S MU-E/S 140 Headstock with side shift 7, MU-E/S MU-E/S 160 Headstock with side shift 8, MUESZ Front and Rear Headstock shiftable with Mechanical Break Away System additionally (Delivery time to be asked for) MU-E/SZ046 Second patented removable shredding bar System: Shark fin MU-E/SZ041 Hood Wear plate (factory fitted) MUXZ040 Working hours meter with electronic sensor MUXZ030 Warning signs and lights (dealer fit) Right handed special build available. Technical Data Model WW max tractor HP Weight No. Of flails cm 540 r.p.m. kg MU-E/S MU-E/S MU-E/S Working Width in cm A Offset mounting to the right B Shifting Range to the right C Maximum Width to the right Retail prices excluding VAT November

34 - Flail Mower MU-H/S Rear and side multi-purpose Flail Mower for Tractors up to 90 HP Standard Equipment Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting. Hydraulic parallelogram side shift. Patented Safety Mechanical Break Away System. Working angle 90 up to 60 down. Gearbox with integrated over run clutch for 540 r.p.m. Belt protection with tension measuring slot. Hydraulic transport safety lock at an angle of 90 with shut-off tap, (2 double acting spool valves required, at least one with floating position). Stand. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. Wearing skids. High tempered one way spring steel protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. P.T.O. shaft. Hood Wear plate (Delivery time to be asked for). Additional Carbide wearing skids, removable. Second patented removable shredding bar System: Shark fin. Electro Hydraulic controls: 1 double acting or 1 single acting spool valve with free flow return required (please state when ordering). Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 34 Retail prices excluding VAT November 2017

35 - Flail Mower MU-H/S Rear and side multi-purpose Flail Mower for Tractors up to 90 HP Order No. Model Retail Price MU-H/S MU-H/S 160 c/w Safety Mechanical Break Away 8, MU-H/S MU-H/S 180 c/w Safety Mechanical Break Away 9, MU-H/S MU-H/S 200 c/w Safety Mechanical Break Away 9, MUHZ041 Hood Wear plate (factory fitted) MUH/SZ045 Carbide wearing skids removable MUHZ016 Second patented removable shredding bar System " Shark Fin " MU-LZ042 Adjustable Vario cutting bar MU/LSZ090 Electro Hydraulic Controls D/A spool or 1 single with free flow return required MUXZ030 Warning signs and lights (dealer fit) MUXZ040 Working hours meter with electronic sensor MUHZ Rotor with 3 back to back Flails MUHZ Rotor with M Shackle Flails Technical Data Model WW Max. Tractor Weight No. of Flails Min. tractor cm HP kg weight MU-H/S ,000 MU-H/S ,200 MU-H/S ,400 Working and Shifting Ranges MU-H/S The stated measurements are approximate and may vary according to different tractors C A B Working Width in cm Shifting Range to the A Right in cm Shifting Range to the B Left in cm Transport Length C Backwards in cm Overall Working Width incl. D Machine Width D Retail prices excluding VAT November

36 - Flail Mower MU-L/S Rear and side multi-purpose Flail Mower for Tractors up to 130 HP STANDARD EQUIPMENT Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting. Hydraulic parallelogram side shift. Patented Safety Mechanical Break Away System. Working angle 90 up to 60 down. Gearbox with integrated over run clutch for 540 r.p.m. Belt protection with tension measuring slot. Hydraulic transport safety lock at an angle of 90 with shut-off tap, Stand. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller with internal bearings and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. High tempered one way spring steel protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. P.T.O. shaft. OPTIONS Second patented removable shredding bar System: Shark fin. Hood Wear plate (Delivery time to be asked for). Additional Carbide wearing skids, removable. Heavy duty Double wide-angle P.T.O. shaft. Electro Hydraulic Controls: 1 double acting and 1 single acting valve with free flow return required (please state when ordering). Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request Left or right hand build (Check availability). 36 Retail prices excluding VAT November 2017

37 - Flail Mower MU-L/S Rear and side multi-purpose Flail Mower for Tractors up to 130 HP Order No. Model Retail Price MU-L/S MU-L/S 200 c/w Safety Mechanical Break Away 11, MU-L/S MU-L/S 220 c/w Safety Mechanical Break Away 11, MU-L/S MU-L/S 250 c/w Safety Mechanical Break Away 11, MUL/SZ Second patented removable shredding bar System " Shark Fin " MU/LSZ090 Electro Hydraulic Controls D/A spool or 1 single with free flow return required MUL/SZ045 Carbide wearing skids removable MULZ041 Hood Wear plate (factory fitted) GE2504WW Heavy Duty Double wide angle P.T.O. Shaft MUL/S046 Scraper for displaced roller MU-L/S Vario MUXZ030 Warning signs and lights (dealer fit) MULZ Rotor with 3 back to back Flails MULZ Rotor with M Shackle Flails Technical Data Type WW max. Tractor Weight No. of Flails No. of Flails Min. tractor cm HP kg Hammer M Shackle weight MU-L/S ,800 MU-L/S ,200 MU-L/S ,500 Working and Shifting Ranges MU-L/S The stated measurements are approximate and may vary according to different tractors C A B D Working Width in cm Shifting Range to the A Right in cm Shifting Range to the B Left in cm Transport Lenght C Backwards in cm D Overall Working Width incl. Machine Width in cm Retail prices excluding VAT November

38 - Verge Mower MU-L/VS Side mounted Flail Mower for Tractors up to 130 HP Standard Equipment Manufactured from High Quality Steel QST/E with Headstock Cat. II for Rear mounting Hydraulic Parallelogram side shift 60 cm (Inner edge of Mulching Head in between 110cm to 170cm from the centre of the Tractor P.T.O. to the outside) Working angle of Mulching Head 90 up to 60 down Gear box with integrated over run clutch for r.p.m ACA System (Auto Control Arm) connecting the Mulching Head to the Carrying Frame with integrated hydraulic side shift (60cm) and integrated hydraulic Break Away System High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Well balanced Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protected against dirt, wear and tear Roller with well rounded edges to preserve the soil and turf and to carry the mulcher, adjustable to different heights; High tempered spring steel one way protection flaps in front of the mower hood; Wearing skids Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality Patented removable shredding bar System: Shark fin. 1 double acting and 1 single acting spool valve required, single active valve with float position Stand; Heavy duty P.T.O. shaft OPTIONS Hood Wear plate Second patented removable shredding bar System: Shark fin. Hydraulic control kit of separate height adjustment of the floating head (1 single acting spool valve with floating position additionally required) Warning signs and lights (not mounted) Working hours meter with electronic sensor Wearing skids, removable Different flails and rotor systems (M-Shackle Flails, 3-back to back-flails,) TUV Certificate on request 38 Retail prices excluding VAT November 2017

39 Verge mower MU-L/VS Verge Mower for Rear mounting for Tractors up to 130 HP with ACA (Auto Control Arm) System for optimized contour following Order no. Model Retail price MU-L/VS MU-L/VS 160, Rear mounting 11, MU-L/VS MU-LV/S 180, Rear mounting 11, MU-L/VS MU-L/VS 200, Rear mounting 12, MU-L/VSZ041 Hood Wear plate (factory mounted) MU-PROZ016 Second patented removable shredding bar System: Shark fin MUXZ040 Working hours meter with electronic sensor MUL/SZ046 Roller scraper for displaced roller MU-L/VS MUXZ030 Warning signs and lights (dealer fit) MU-L/VSZ010 Hydraulic Side Shift. 117cm - 177cm 1, MU-L/VSZ045 Wearing skids, removable MULZ Rotor with 3-back to back-flails MULZ Rotor with "M"-Shackle Flails Technical Data Model WW Max. Tractor HP Weight No. of cm r.p.m. kg flails MU-L/VS MU-L/VS MU-L/VS , Retail prices excluding VAT November

40 Flail Mower MU-M/S Verge Mower for Rear mounting for Tractors up to 160 HP Standard Equipment Manufactured from High Quality QSt/E Steel. Rear mounted Headstock Cat. II + III with hydraulic horizontal side shift. Side shift 45 cm (Inner edge of Mulching Head in between 120 to 165 cm from the centre of the tractor P.T.O. to the outside). Working angle of Mulching Head 90 up to 60 down. Hydraulic Safety Break Away System and hydraulic transport lock. Gearbox with integrated over run clutch for r.p.m. Automatic belt tension, Belt protection with tension measuring slot. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Well balanced spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller (Ø 244 mm) with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. Wearing skids. High tempered one way spring steel protection flaps in front of the mower hood. Swinging arm connection of Head Stock and Mulching Head together with optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut (2 double acting spool valves required, at least one with float position). Patented removable shredding bar System: Shark fin. P.T.O. shaft. Heavy duty Double wide angle P.T.O. shaft. Second patented removable shredding bar System: Shark fin. Hood Wear plate (Delivery time to be asked for). Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 40 Retail prices excluding VAT November 2017

41 Flail Mower MU-M/S Verge Mower for Rear mounting for Tractors up to 160 HP Order no. Model Retail price MUM/S MU-M/S 180 Rear mounting 15, MUM/S MU-M/S 200 Rear mounting 15, MUM/S MU-M/S 220 Rear mounting 16, MUM/S MU-M/S 250 Rear mounting 16, MUM/SZ016 Second patented removable shredding bar System: Shark fin MUM/SZ041 Hood Wear plate (factory mounted) GE2502 WW Heavy duty Double wide angle P.T.O. shaft MUM/SZ046 Roller scraper for displaced rear roller MUXZ030 Warning signs and lights (dealer fit) MUXZ040 Working hours meter with hydraulic sensor MULZ Rotor with 3 back to back flails MULZ Rotor with "M" Shackle Flails Technical Data Model WW max. Tractor HP Weight No of flails cm r.p.m. kg MU-M/S , MU-M/S , MU-M/S , MU-M/S , Retail prices excluding VAT November

42 - Flail Mower MU-Pro/S Rear and side multi-purpose Flail Mower for Tractors up to 220hp STANDARD EQUIPMENT Manufactured from High Quality QSt/E Steel with Headstock Cat. III for Rear Mounting Hydraulic parallelogram side shift: 296cm Working angle 90 up to 60 down. Gearbox with integrated over run clutch for 1000 rpm Belt protection with tension measuring slot. Hydraulic transport safety lock at an angle of 90 with shut-off tap, Stand. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller with internal bearings and well rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights. High tempered one way spring steel protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality. P.T.O. shaft. OPTIONS Second patented removable shredding bar System: Shark fin. Roller scraper Additional Carbide wearing skids, removable. Alternative flails and rotor systems (3 back to back Flails, M Shackle Flails). TUV Certificate on request 42 Retail prices excluding VAT November 2017

43 - Flail Mower MU-Pro/S Rear and side multi-purpose Flail Mower for Tractors up to 220hp Order number Model Retail Price MU-Pro/S MU-Pro/S 250 c/w Hydraulic Safety Break Away 21, MU-PROZ016 Second patented removable shredding bar System: Shark fin MU-PROZ046 Roller scraper for displaced rear rear roller MUXZ030 Warning signs with lights (dealer fit) MUXZ040 Working hours meter with hydraulic sensor MULZ Rotor with 3 back to back Flails MULZ Rotor with M Shackle Flails Technical Data Type WW max. Tractor Weight No. of Flails Min. tractor cm HP kg weight MU-Pro/S , ,000 Working and Shifting Ranges MU-Pro/S The stated measurements are approximate and may vary according to different tractors C A B Working Width in cm 250 Shifting Range to the A Right in cm Shifting Range to the B Left in cm Transport Lenght C Backwards in cm 370 D Overall Working Width incl. Machine Width in cm 546 D Retail prices excluding VAT November

44 Flail Mower MU-Farmer Front and Rear mounting for Tractors up to 220 HP Standard Equipment Heavy duty flail mower for professional us, manufactured from High Quality QSt/E Steel for mowing and shredding of large quantities of biomass using less power. Fixed Headstock Cat. II + III for rear mounting with floating upper linkage point. Heavy duty gearbox with integrated over run clutch for r.p.m. Automatic belt tensioning. Hood wear plate. High tempered large and heavy duty M Farmer Hammer Flails with self-sharpening cutting edge to ensure a clean cut and maximum shredding using less power. Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Two rows of high tempered one way spring steel protection flaps in front of the mower hood. Large hood with specially formed side plates and side skids with cutting function. Rear mounting: Swivelling, height adjustable rubber wheels 10.0/ AW. Front mounting: Large self-cleaning roller to carry the flail mower, adjustable for different heights. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and two removable shredding bars spreads the shredded material evenly inside the hood giving an excellent Mulching and Shredding Quality. Two patented removable shredding bars System: Shark fin. Heavy duty P.T.O. shaft. Hydraulic Weight Transfer MU-SOFA, for front mounting machines necessary. Large roller (Ø 244 mm) to carry the MU-Farmer, with variable height adjustment (in lieu of rubber wheels). MU-Farmer Rear mounted only Set of cereal straw equipment. Alternative flails ( M Farmer back to back flails with a third centre flail in between). TUV Certificate on request 44 Retail prices excluding VAT November 2017

45 Flail Mower MU-Farmer Front and Rear mounting for Tractors up to 220 HP Order No. Model Retail price MU-FARMER MU-FARMER , MU-FARMER MU-FARMER , MU-FARMER MU-FARMER , MU-FARMER FARMER 280 FRONT MOUNTED WITH ROLLER 15, MU-FARMER FARMER 300 FRONT MOUNTED WITH ROLLER 16, MU-SOFA Hydraulic Weight transfer for front mounting machines neccessary MU-FARMERZ032 Extra protection for stony conditions for front 1, mounting only MUXZ036 Warning signs and lights (dealer fit) MUXZ040 Working hours meter with electronic sensor Technical Data Model WW Overall max. Tractor-HP Weight No. of flails cm Width cm r.p.m. kg FARMER Rear mounting MU-FARMER 280-H , MU-FARMER 300-H , MU-FARMER 330-H , FARMER Front mounting MU-FARMER 280-F , MU-FARMER 300-F , When ordering please state tractor model together with size and dimension of tractor P.T.O. Retail prices excluding VAT November

46 Flail Mower MU-Farmer 670 Rear mounting for Tractors up to 300 HP Standard Equipment Heavy duty flail mower for professional us, manufactured from High Quality QSt/E Steel for mowing and shredding of large quantities of biomass using less power. Fixed Headstock Cat. II + III for rear mounting with floating upper linkage point. Quick attach axle for quick change to transport from working position 4 Swivelling, height adjustable rubber wheels 10.0/ AW. Hydraulic moveable Transport axle with Transport wheels 10.0/ Heavy duty gearbox with integrated over run clutch for r.p.m. Automatic belt tensioning. Hood wear plate. High tempered large and heavy duty M Farmer Hammer Flails with self-sharpening cutting edge to ensure a clean cut and maximum shredding using less power. Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Two rows of high tempered one way spring steel protection flaps in front of the mower hood. Large hood with specially formed side plates and side skids with cutting function. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and two removable shredding bars spreads the shredded material evenly inside the hood giving an excellent Mulching and Shredding Quality. Two patented removable shredding bars System: Shark fin. Heavy duty P.T.O. shaft. Warning signs and lights Extra protection for extremely stony conditions. Working hours meter with electronic sensor. Alternative flails ( M -Farmer back to back flails with a third centre flail in between). TUV Certificate on request 46 Retail prices excluding VAT November 2017

47 Flail Mower MU-Farmer 670 Rear mounting for Tractors up to 300 HP Order No. Model Retail price MU-FARMER MU-FARMER 670 Rear mounting 44, with transport axle MUXZ040 Working hours meter with electronic sensor Hydraulic Brakes On request Technical Data Model WW Overall Transport max. Tractor-HP Weight No. of flails cm Width cm Width cm r.p.m. kg MU-FARMER , When ordering please state tractor model together with size and dimension of tractor P.T.O. Retail prices excluding VAT November

48 Flail Mower MU-Farmer/S Rear Mounted Side Flail Mower for Tractors up to 280 HP Standard Equipment Heavy duty flail mower for professional use, manufactured from High Quality QSt/E Steel for mowing and shredding of large quantities of biomass using less power. Side trailed with Headstock Cat. III (not shown) for mounting to the upper and lower linkage of the tractor. Hydraulic swivelling to transport and work positions. Heavy duty gearbox with integrated over run clutch for 1000 r.p.m. Automatic belt tensioning. Hood Wear plate. High tempered large and heavy duty M Farmer Hammer Flails with self-sharpening cutting edge to ensure a clean cut and maximum shredding using less power. Spiral rotor with specially formed flail lugs to protect against damages from obstacles and internal bearings protecting against dirt, wear and tear. Two rows of high tempered one way spring steel protection flaps in front of the mower hood. Large hood with specially formed side plates and side skids with cutting function. Swivelling, height adjustable rubber wheels 10.0/ AW. 1 front mounted rubber wheel. Warning signs and lights. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and two removable shredding bars spreads the shredded material evenly inside the hood giving an excellent Mulching and Shredding Quality. Two patented removable shredding bars System: Shark fin. 3 double acting spool valves required. Heavy duty P.T.O. shaft Electro hydraulic steering (1 double acting spool valve required). Extra protection for extremely stony conditions. Alternative flails ( M Farmer back to back flails with a third centre flail in between). TUV Certificate on request 48 Retail prices excluding VAT November 2017

49 Flail Mower MU-Farmer/S Rear Mounted Side Flail Mower for Tractors up to 280 HP Order No. Model Retail price MU-FARMER/S 420 MU-Farmer/S 420 On request MU-FARMERS060 Air Brakes On request MU-FARMERS030 Electro hydraulic steering On request (1 double acting spool valve required) MU-FARMERZ Additional protection for stony conditions On request MUXZ040 Working hours meter with electronic sensor On request MU-FARMERZ Wide Tyres 4x340/55-16 On request Hydraulic Brakes On request Technical Data Model WW max. Tractor HP Weight No. of flails cm r.p.m. kg MU-Farmer/S , When ordering please state tractor model together with size and dimension of tractor P.T.O. Retail prices excluding VAT November

50 Flail Mower MU-W/O Front or Rear mounted for Tractors up to 90 HP For Wine and Fruit Growing Standard equipment Manufactured from High Quality QSt/E Steel with fixed Headstock Cat. I + II for Front or Rear mounting. Gear box with integrated over run clutch and through drive for 540 / r.p.m. Belt protection with tension measuring slot. High tempered M Hammer flails to ensure clean cut and maximum shredding using less power. Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear. Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the mulcher, adjustable for different heights. Wearing skids (vertical or horizontal, please state when ordering). High tempered one way spring steel protection flaps in front of the mower hood. Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut. Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly in front of the roller giving an excellent Mulching and Shredding Quality. Patented removable shredding bar System: Shark fin, P.T.O. shaft. Hood Wear plate. Additional Carbide wearing skids, removable. Hydraulically driven tree-grid (Ø 50cm) with mechanical swivel control, min. 35 ltr oil-flow, (1 single acting spool valve required with free flow return). Beam with rakes for collecting wood inside the hood in front of the roller (Fruit and wine growing). Side deflectors, height and length adjustable. TUV Certificate on request 50 Retail prices excluding VAT November 2017

51 Flail Mower MU-W/O Front or Rear mounted for Tractors up to 90 HP For Wine and Fruit Growing Order No. Model Retail Price MU-W/O MU-W/O 120 with fixed Headstock 4, MU-W/O MU-W/O 140 with fixed Headstock 4, MU-W/O MU-W/O 150 with fixed Headstock 5, MU-W/O MU-W/O 160 with fixed Headstock 5, MU-W/O MU-W/O 180 with fixed Headstock 5, MU-W/O MU-W/O 200 with fixed Headstock 6, MU-HZ Front or Rear Headstock Cat MU-HZ Front and Rear Headstock Cat shiftable (MU-W ) MUHZ016 Second patented removable shredding bar System "Shark fin" MUHZ041 Hood Wear plate (factory mounted) MUXZ035 Tree mower with hydraulic drive 3, MUHZ040 Beam with rakes for collecting wood MUHZ020 Modification 540 to 1000 r.p.m MUXZ030 Warnig signs and lights (dealer fit) MUXZ040 Working hours meter with electronic sensor Technical Data Model WW Overall width Max Tractor HP Weight No of cm cm 540 RPM RPM. kg Hammer Flails MU-W/O MU-W/O MU-W/O MU-W/O MU-W/O MU-W/O Retail prices excluding VAT November

52 Our experience Your benefit Purposely designed hood made of high quality QStE steel with many angles Smooth running, therefore economical on fuel Every profile angle creates strength, therefore retaining value Large opening between mulching hood and rear roller, therefore reducing blockages when cutting high volumes of mulch mass 1 Removable Bolt-on wear parts for easy replacement Long lasting maintenance for first rate Müthing mulch quality Maintaining residual value 2 Exceptional shredding of crop residues under practically all conditions Unique, patented "Shark fin" shredding bar system with bolt-on segments to ease removal Exceptional chopping quality ensured, virtually regardless of weather conditions Smooth running flail mower, meaning increased fuel economy Excellent ground contour following with an even cutting height The supporting roller is located very close to the rotor, which means precise contour following The mulched material is spread evenly and distributed behind the rear roller, which means faster decomposition The rotor cleans the rear roller automatically, which means no heap or swath formation Professional implements with unique "Starinth" rear roller bearing system (from model range MU-L upwards) 3 Very long service life due to the countervailing star design and labyrinth sealing (see also page 55) High tempered one way spring steel flaps with swing protection Reduced breakage which means increased reliability and safety Additional stone guard protection can be supplied 52 Retail prices excluding VAT November 2017

53 Our experience Your benefit Double spiral rotor Smooth running because the blades are constantly in work, which means more fuel economy Tangentially arranged flail holders Obstacles and impacts are overcome, which means fewer flails lost, combined with less rotor damage The rear side of the Müthing Hammer or Shackle flail shape mirrors the shape of the rotor Low wear hammer flails with self-sharpening effect When obstacles are hit the Müthing hammer flail is swung back across the full width of its rear side onto the rotor, which means fewer flail breakages and fewer rotor imbalances The use of high quality materials means value conservation, safety and reliability Drive All Müthing flail mowers are protected by an integrated over run clutch within the mechanical gearbox or within the hydraulic drive (when mounted), which means protection for the flail mower and the drive system, requiring less maintenance Maintenance Few lubrication points which are easy to access without tools Safety Our flail mowers are manufactured according to current Machinery Directives, CE regulations and are TÜV certified Retail prices excluding VAT November

54 The new generation of mulchers from Müthing for all types of application throughout the year. Economical ecological adaptable efficient - Optimised hood shape with efficient shredding channel for better mulching quality and defibration - Variable adjustment of the shredding ratio and the suction/feed capacity for different requirements - Option for easy adjustment of the rear roller for use in difficult weather and soil conditions - TÜV-certified thrown object test according to ISO for optimal safety... for mulching that saves time and energy with Front or Rear mounting (Standard) MU-H Vario with Front and Rear mounting (Option) MU-L Vario Optimised mulcher hood with a larger open front - for better material flow Efficient suction and blade clearance - for a greater suction effect and better material uptake Adjustable cutting bar (optional) - for various shredding ratios when meeting different requirements Longer shredding channel with "Shark fin" short shredding bar system - for optimum shredding and defibration additionally with with Front and Rear mounting MU-M Vario (Standard) MU-PRO Vario Pivoting rear roller that can be adjusted in a one man operation - for depositing mulch material either behind or in front of the rear roller Slotted holes in the lower and upper link points - for better ground contour following 54 Retail prices excluding VAT November 2017

55 Roller Bearing Starinth Top quality durable, heavy duty rear roller bearing system with multilayer sealing and large volume, double tapered roller bearing that meets even the most demanding requirements Sealing 1 = Outer wrap and winding protection between the roller and the flail side panel to reject coarse debris Sealing 2 = Greased mechanical labyrinth as main protection against dirt, mud, plant residue and moisture Sealing 3 = Greased multilayer labyrinth made out of small spring steel rings to protect against fine dust and moisture residue Sealing 4 = Sealed double tapered roller bearing with high load capacity Pre-assembled bearing unit in a strong cast housing to bolt on with floating star shaft into the side panel to allow better tolerance of impacts and side forces on hard and uneven surfaces, from heavy duty work and fast mowing Heavy duty durable long lasting easy to refit Retail prices excluding VAT November

56 Mulching-Systems (MMS) Name... Date... Address... Sign... Tel.... Fax... to... Tractor Model:... Year:... Rotation of P.T.O. seen from behind (please mark) Mounting of flail mower Rear Front Rear pushed Cat. I Cat. II Cat. III P.T.O. rotation & RPM... Profile and width of the P.T.O. :... Height of P.T.O. (Centre from ground)... Distance of P.T.O. to the centre of lower linkage arms of the tractor:..... When front mounted: Maximum Front Axle weight:... When front mounted: Lifting capacity of Front hydraulics: Retail prices excluding VAT November 2017

57 Hydraulic Weight Transfer MU-SOFA Hydraulic Weight Transfer kit for Front Mounted Flails The hydraulic weight transfer MU-SOFA" by Müthing stands for: S => Security during transport and work O => Optimization of traction (tractor) and weight of the attachment F => Flotation of the attachment during transport and work A => Adjustment continuously of the Flail in various ground conditions The Müthing MU-SOFA can be installed into all known hydraulic systems of existing front hydraulic 3 point linkages. Installation time is about 4 hours. The hydraulic kit is designed to: > Help the steering capability of tractors in work with front mounted attachements > To reduce bouncing during transport. > To optimize the perfect contour following for an even and high quality of cut. > To reduce Running Costs (bearings, wearing parts etc.) > To save expensive accessories (e.g. front mounted wheels). Retail prices excluding VAT November

58 Flail Mowers for Solar Power plants Take advantage of our experience in the maintenance of Solar power plants with Müthing flails! Get in contact with us! 58 Retail prices excluding VAT November 2017

59 - Flails and Shackles For all models MU-H to MU-Maxi M Hammer Flail M Shackle Flail Order No. Model Retail Price "M" Hammer Flail MU Original "M" Hammer Flail MU Bolt with nut 4.23 Total price "M" Shackle Flail MU Original "M" Shackle Flail 6.72 MU Müthing - Spacer 2.36 MU Original "M" Shackle - twisted MU Bolt with nut 4.32 Total price "M" back to back Flail for Shackle Rotor x "M" back to back Blades outside Müthing - Shackle MU Bolt with nut 4.32 Total price For all models MU-Farmer 3 years warranty against break of M -Hammer "M" Hammer Flail "Farmer" MG00350-A M Hammer Flail Farmer Original "M" Hammer "Farmer" 3 years guarantee against break of "M" Hammer MAG00353 Bolt with nut Total price Retail prices excluding VAT November

60 - Flails and Shackles For all models MU-C to MU-E M Scoop Flail M Carbide Shackle Flail Order No. Model Retail Price "M" Scoop Flail for MU-C+MU-FM+MU-C/S+MU-FM Hydro MU1 Original "M" Scoop Flail C+FM MU3 2 x Spacer 2.74 MU Bolt with nut 1.93 Total price "M" Carbide Shackle Flail for MU-C+MU-FM+MU-C/S+MU-FM Hydro STANDARD MU5 Original "M" Carbide Shackle Flail short MU Original "M" Shackle short 4.71 MU Bolt with nut 1.93 Total price "M" Carbide-Shackle Flail for MU-E, MU-E/S, MU-E/Hydro STANDARD MU4 Original "M" Carbide Shackle Flail long MU Original "M" Shackle long 5.58 MU Bolt with nut 1.93 Total price For spare parts department Tel Fax Retail prices excluding VAT November 2017

61 Notes Retail prices excluding VAT November

62 Notes 62 Retail prices excluding VAT November 2017

63 Notes Retail prices excluding VAT November

64 - - - For all your mowing requirements in Agriculture and Groundcare 64 CROWN TAILRIG, BONCHESTER BRIDGE, HAWICK, TD9 8RA TEL: FAX: MOBILE: Website: - mail@simon-richard.co.uk, Retail prices excluding VAT November 2017