DITCHBANK FLAIL CUTTERS

Transcription

1

2 OFFSET/IN-LINE SLOPE MOWERS SPECIFICLLY DESIGNED FOR COMPCT TRCTORS Inner lining Pto with overrun clutch Mechanical breakaway. Rotor with internal bearings Rotation joint and arms on self lubricating bushing Rotor with internal sealed bearings Rear adjustable roller Mechanical breakaway HP Tractor Min. tractor weight lbs Min. tractor width ft. ZME ZME Working positions (m) +90 E -50 D C 8 ZME 125 ZME 155 ZME 125 ZME C D E ZME 125 ZME Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.

3 Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* Flail head angle Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZME I ZME I * Reach measured from tractor centre line to head edge. Machines Model Flails Suggested Retail - $ ZME rticulated Y blades ZME rticulated Y blades For Set-up times please check page 39 Equipped with: ccessories at extra charge Model Suggested Retail - $ Kit distributor with floating - in case the tractor is not equipped with double acting valves (Code ZME12501) Hydraulic sideshift cylinder Hydraulic cylinder for head positioning Circular section of the arms H.T.R. (High Torsion Resistance) Rotation joint and arms on self lubricating bushing Rear adjustable roller Ø 4 3 positions Warning: Suitable for tractors equipped with 1 distributor provided with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) Main housing with inner lining Drop forged parts Front and rear protection of flail head Pto with overrun clutch Packaging Floating system Flails rticulated Y flails for grass and bushes Ø max 1 Cod Mechanical breakaway (arm protection in case of obstacles) ny Ferri offset mower ZME-ZTE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Oil cooler with thermostat 9 Develo Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.

4 OFFSET/IN-LINE SLOPE MOWERS FOR GRICULTURE ND GREEN RES Mechanical block pin for transport 6-rows spiral rotor Rotor internal sealed bearings Hydraulic block tap for transport Floating frame Rotation joint on self lubricating bushing Rotation joint on self lubricating bushing Hydraulic side shift cylinder fitted within the parallel arms. Hydraulic block tap for transport with manual activation (no chains or holders) Mechanical block pin for transport (no chains or holders) FERRI PTENT on DOULE LINKGE This system utilizes a three point headstock attachment with a double linkage. One machine is able to perform the work which required use of two slope mowers. HP Tractor Min. tractor weight lbs Gearbox unit outside the transmission cover (more offset and less PTO angle). Min. tractor width ft. ZMLE ZMLE Working positions: right hand linkage Floating frame following the ground contours ZMLE1400 ZMLE1600 ft ft C ft D ft E ft F ft G ft H ft D C Internal E External H G F Rotation joint on self lubricating bushing Working positions: left hand linkage ZMLE1400 ZMLE1600 ft ft C ft E 10 Rotor internal sealed bearings D ft E ft C D Internal External

5 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. Developed DITCHNK FLIL CUTTERS Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* * Reach measured from tractor centre line to head edge. Flail head angle Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZMLE I - II ZMLE I - II Machines Model Flails Suggested Retail - $ ZMLE Y blades Hammer blades ZMLE Y blades Hammer blades ccessories at extra charge Flails Interchangeable on the same rotor Suggested Retail - $ Kit distributor with 2 levers and floating position (ZL1605) Kit Cat. II pins (code ZMT1615) 91 Wide angle PTO shaft - (ZMT2010) only if ordered with the machine Hydraulick breakaway kit (ZML1605) 189 Warning: Suitable for tractors equipped with 1 distributor with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) For Set-up times please check page 39 Equipped with: Gearbox is fitted outside the transmission cover (more reach and less pto shaft angle) Double locking system for transport (this avoids accidental tilting or side movement Circular of section the flail of head) the arms no need H.T.R. for (High chains Torsion holders Resistance) Floating frame (the joint pin on the tractor side allows the head system to follow the ground, protecting the arm structure) Gearbox with free wheel Hydraulic side shift cylinder fitted within the parallel arms for better protection during work Hydraulic cylinder for head Drop forged parts positioning Rotation joint and parallel arms on self lubricating bushings Heat treated pins Rotor internal sealed bearing Floating system djustable Rear Roller ø 5.5 Front guard with metal flaps Reinforced Pto Shaft Packaging (pallet) djustable side skids Y blades for: grass, shrubs, bushes Ø max 1 1/4 Forged hammer-blades for: woods, grass, twigs Ø max 1 3/4 Mechanical breakaway (arm protection in case of obstacles) Cod Cod ny Ferri offset mower ZME-ZTE-ZMLE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Side skid kits will be supplied separately. Relevant mounting as per instructions will be at dealer s charge. Oil cooler with thermostat 11

6 OFFSET/IN-LINE SLOPE MOWERS FOR GRICULTURE ND GREEN RES Hydraulic block tap of flail head during transport. Gearbox unit outside the drive Hydraulic block tap side movements for transport with manual activation Rotor internal sealed bearings Mechanical breakaway Floating frame Hydraulic side shift cylinder fitted within the parallel arms Floating frame Hydraulic side shift cylinder fitted within the parallel arms for better protection during work Hydraulic block tap side movements for transport with manual activation (no chains or holders). Hydraulic block tap of flail head during transport (no chains or holders). Gearbox unit outside the transmission cover HP Tractor Min. tractor weight lbs ZTE 2300 FRMING Min. tractor width ft. Mechanical breakaway Working positions +90 E 14 Rotor internal sealed bearings ZTE ft ft ZTE D ZTE 2300 C ft 7 5 D ft 0 81 E ft 5 10 C

7 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. DITCHNK FLIL CUTTERS Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* Flail head angle * Reach measured from tractor centre line to head edge. Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZTE2300 Farming II Machines Model Flails Suggested Retail - $ ZTE2300 Farming 22 Hammer blades ccessories at extra charge Flails Interchangeable on the same rotor ( Overlap ) Forged hammer-blades for: woods, grass, twigs Ø max 1 3/4 Cod Suggested Retail - $ Kit distributor with floating (code ZL1605) Wide angle PTO shaft ( ) only if ordered with the machine Warning: Suitable for tractors equipped with 1 distributor with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) ny Ferri offset mower ZME-ZTE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Side skid kits will be supplied separately. Relevant mounting as per instructions will be at dealer s charge. For Set-up times please check page 39 Equipped with: Gearbox is fitted outside the transmission cover (more-side sliding and less pto shaft angle) Hydraulic block tap for this avoids accidental side movements of the flail head without Circular use of section chains of or the arms holders. H.T.R. (High Torsion Resistance) Hydraulic block tap for this avoids accidental leaning of the mowing body without use of chains or holders. Floating frame ((the joint pin on the tractor side allows the head system to follow the ground, protecting the arms structure of the parallelogram). OVERLP spiral rotor with two spiral rows reinforced with a 2/5 section Drop forged forged parts hammer-blades and multiuse flails. 6-rows-rotor reinforced with a 2/5 section for articulated flails. Gearbox overrunning clutch. Floating system Hydraulic side shift cylinder fitted within the parallel arms for better protection during work. Hydraulic cylinder for head positioning. Rotation joint and parallelogram arms on self lubricating bushing. Heat treated pins. Rotor internal sealed bearings. Rear adjustable roller Ø 5 1/2. Front guard with metal flaps. Reinforced Pto shaft. djustable side skids. Mechanical breakaway (arm protection in case of obstacles) Oil cooler with thermostat 15 Dev

8

9 OFFSET/IN-LINE SLOPE MOWERS FOR GRICULTURE ND GREEN RES Hydraulic block tap for transport Rotation joint on self lubricating bushing 6-rows spiral rotor Mechanical block pin for transport Floating frame 6-rows spiral rotor Rotor internal sealed bearings Hydraulic side shift cylinder fitted within the parallel arms. Rotation joint on self lubricating bushing Floating frame following the ground contours Hydraulic block tap for transport with manual activation (no chains or holders) Mechanical block pin for transport (no chains or holders) Gearbox unit outside the transmission cover (more-side sliding) Rotation joint on self lubricating bushing HP Tractor Min. tractor weight lbs ZMTE 1600 FRMING ZMTE 1800 FRMING ZMTE 2000 FRMING Min. tractor width ft. Rotor internal sealed bearings Working positions +90 E Hydraulic side shift cylinder fitted within the parallel arms for better protection during work 12 ZMTE1600 ZMTE ZMTE2000 ZMTE1600 ZMTE1800 ZMTE D C ZMTE1600 ZMTE1800 ZMTE2000 C D E

10 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. DITCHNK FLIL CUTTERS Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* * Reach measured from tractor centre line to head edge. Flail head angle Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZMTE1600 Farming II ZMTE1800 Farming II ZMTE2000 Farming II Machines Model Flails Suggested Retail - $ ZMTE1600 Farming ZMTE1800 Farming ZMTE2000 Farming Flails 40 Y lades hammer blades Y lades hammer blades Y lades hammer blades ccessories at extra charge Interchangeable on the same rotor Y blades for: grass, shrubs, bushes Ø max 1 1/4 Forged hammer-blades for: woods, grass, twigs Ø max 1 3/4 Cod Cod Suggested Retail - $ Kit distributor with floating (code ZL1605) Wide angle PTO shaft (only if ordered with the machine) Hydraulick breakaway kit (ZMT2009) 132 Warning: Suitable for tractors equipped with 1 distributor with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) For Set-up times please check page 39 Equipped with: Gearbox is fitted outside the transmission cover (more side sliding and less pto shaft angle Hydraulic block tap for transport with manual activation Circular (this section avoids of the arms accidental H.T.R. (High side Torsion movements Resistance) of the flail head without use of chains or holders). Mechanical block pin for transport (this avoids accidental leaning of the mowing body without use of chains or holders). 6-rows rotor. Floating frame ((the joint pin on the tractor side allows the head system to follow the ground, protecting Drop the forged arms parts structure of the parallelogram). Gearbox overrunning clutch. Hydraulic side shift cylinder fitted within the parallel arms for better protection during work. Floating system Hydraulic cylinder for head positioning. Rotation joint and parallelogram arms on self lubricating bushing. Heat treated pins. Rotor internal sealed bearings. Rear adjustable roller Ø 5 1/2 Front guard Mechanical with metal breakaway flaps. Reinforced (arm protection Pto shaft. in case of obstacles) Packaging (pallet). djustable side skids. Deve ny Ferri offset mower ZME-ZTE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Side skid kits will be supplied separately. Relevant mounting as per instructions will be at dealer s charge. 13 Oil cooler with thermostat

11

12 OFFSET/IN-LINE SLOPE MOWERS FOR GRICULTURE ND GREEN RES Overlap spiral rotor with two spiral rows, reinforced to 0,4 section Gearbox fitted outside the transmission cover Hydraulic block tap for transport Inner lining Mechanical breakaway (protection in case of obstacles). Rear adjustable roller Ø 168 mm. Rotation joint on self lubricating bushing Hydraulic block valve for transport Mechanical breakaway Floating frame Overlap spiral rotor with two spiral rows, reinforced to 0,39 section for either hammer blades and multiuse flails. Rear adjustable roller 6 1/2 Gearbox unit outside the transmission cover (more-side sliding) Hydraulic block valve for transport with automatic activation (no chains or holders). Hydraulic block tap for transport with manual activation (no chains or holders). Floating frame following the ground contours. HP Tractor Min. tractor weight lbs ZLE1600 Dynamic ZLE1800 Dynamic ZLE2000 Dynamic Min. tractor width ft. Working positions Rotation joint on self lubricating bushing. +90 E 16 Inner lining for a complete protection of the frame. ZLE1600 ZLE ZLE2000 ZLE1600 ZLE1800 ZLE D C ZLE1600 ZLE1800 ZLE2000 C D E

13 Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup. DITCHNK FLIL CUTTERS Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* * Reach measured from tractor centre line to head edge. Flail head angle Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZLE1600 Dynamic II ZLE1800 Dynamic II ZLE2000 Dynamic II Machines Model Suggested Retail - $ ZLE1600 Dynamic ZLE1800 Dynamic ZLE2000 Dynamic ccessories at extra charge Flails Interchangeable on the same rotor ( Overlap ) Forged hammer-blades for: woods, grass, twigs Ø max 1 3/4 Multiuse blades for: grass, bushes, shrubs, sticks Ø max 1 1/4 Cod Cod ZLE1600 n 16 ZLE1800 n 18 ZLE2000 n 20 ZLE1600 n 48 ZLE1800 n 54 ZLE2000 n 60 Warning: Suggested Retail - $ Kit distributor with floating (code ZL1605) Wide angle PTO shaft ( ) only if ordered with the machine Suitable for tractors equipped with 1 distributor with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) ny Ferri offset mower ZME-ZTE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Side skid kits will be supplied separately. Relevant mounting as per instructions will be at dealer s charge. For Set-up times please check page 39 Equipped with: Gearbox is fitted outside the transmission cover (more-side sliding and less pto shaft angle) Hydraulic block valve for transportation with automatic activation (this avoids accidental side movements of the flail head without Circular operator s section intervention of the arms or the use of chains or holders). H.T.R. (High Torsion Resistance) Hydraulic block tap for transportation with manual activation (this avoids accidental leaning of the mowing body without use of chains or holders). Inner lining (sheet metal protection for the whole flail head). Mechanical breakaway (protection in case of obstacles) with mechanical block system to make coupling to the tractor easier. OVERLP spiral rotor with two spiral rows reinforced Drop forged with a parts 0,4 section for forged hammerblades and multiuse flails. 6-rows-rotor reinforced with a 2/5 section for articulated flails. djustable counterblade (to adjust the size of the debris). Rear adjustable roller Ø 6 1/2. Floating system Floating frame to follow the ground contours. djustable side skids. Rotation joint and parallelogram arms on self lubricating bushing. Heat treated pins. Gearbox overrunning clutch. Hydraulic side shift cylinder fitted within the parallel arms for better protection during work. Front guard with metal flaps and rear guard Mechanical with rubber. breakaway Reinforced (arm Pto protection shaft. in case of obstacles) 17 Oil cooler with thermostat Developed

14 Professional Line Offset in-line slope mowers

15 The ZHE2500 Central and offset mower meets the needs of the professional green maintenance operators, who require high productivity and reliability. The productivity is ensured by the significant cutting width of the machine and by the Overlap double helix rotor. The reliability stems from the presence of relevant structural details, such as the inner subframe all round protection, the shock absorber with mechanical springs, the rotation joint mounted on self-lubricating bushings and the height adjustable roller (Ø 6 1/2 with removable end caps). Particular attention has been paid to the safety during transportation, a double hydraulic lock system prevents unintentional movement or the oscillation of the mower. Offset in-line slope mowers SFETY RELIILITY Hydraulic block valve for transport with automatic activation (no chains or holders). Hydraulic block tap for transport with manual activation (no chains or holders). Wear resistant and replaceable tubular skids. Inner lining for a complete protection of the frame. Shock absorber with mechanical springs.

16 ZHE 2500 PERFORMNCE TECHNICL Gearbox is fitted outside the transmission cover. OVERLP spiral rotor with two spiral rows for either hammer blades and multiuse flails. Height adjustable roller Ø 6 1/2 with removable end caps. Floating frame following the ground contours. Rotation joint on self lubricating bushing.

17 OFFSET/IN-LINE SLOPE MOWERS FOR GRICULTURE ND GREEN RES Overlap spiral rotor with two spiral rows, reinforced to 0,4 section Gearbox fitted outside the transmission cover Hydraulic block tap for transport Inner lining Mechanical breakaway with spring assisted device. Rear adjustable roller Ø 6 1/2. Rotation joint on self lubricating bushing Hydraulic block valve for transport Floating frame Mechanical breakaway with spring assisted device Overlap spiral rotor with two spiral rows, reinforced to 0,4 section for either hammer blades and multiuse flails. Rear adjustable roller 6 1/2 Gearbox unit outside the transmission cover (more-side sliding). Hydraulic block valve for transport with automatic activation (no chains or holders). Hydraulic block tap for transport with manual activation (no chains or holders). HP Tractor Min. tractor weight lbs ZHE2500 Dynamic Min. tractor width ft. djustable side skids. Working positions Rotation joint on self lubricating bushing. Inner lining for a complete protection of the frame. ZHE ft ft ZHE C ft D ft E ft E D ZHE C

18 Prices Effective as of 9-17 Technical data Model Cutting width Max sidesliding* * Reach measured from tractor centre line to head edge. Flail head angle Weight Three point linkage Pto elts lade tip speed ft. ft. degrees lbs Cat. Rpm n ft/sec ZHE2500 Dynamic II - III Machines Model Suggested Retail - $ ZHE 2500 Dynamic ccessories at extra charge Warning: Suggested Retail - $ Kit distributor with floating (code ZL1605) Wide angle PTO shaft (code ZHE2505) Flails Interchangeable on the same rotor ( Overlap ) Forged hammer-blades for: woods, grass, twigs Ø max 2 Multiuse blades for: grass, bushes, shrubs, sticks Ø max 1 1/2 Suitable for tractors equipped with 1 distributor with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) For Set-up times please check page 39 Equipped with: Gearbox is fitted outside the transmission cover (more-side sliding and less pto shaft angle) elt transmission (5 belts) Hydraulic block valve for transportation with automatic activation (this avoids accidental side movements Circular section of the flail of the head arms without H.T.R. operator s (High Torsion intervention Resistance) or the use of chains or holders). Hydraulic block tap for transportation with manual activation (this avoids accidental leaning of the mowing body without use of chains or holders). Inner lining (sheet metal protection for the whole flail head). Mechanical breakaway with spring assisted device OVERLP spiral rotor with two spiral rows reinforced with a 0,4 section for forged hammerblades Drop forged parts and multiuse flails. 6-rows-rotor reinforced with a 2/5 section for articulated flails. djustable counterblade (to adjust the size of the debris). Rear adjustable roller Ø 6 1/2. Floating frame to follow the Floating system ground contours. djustable side skids. Rotation joint and parallelogram arms on self lubricating bushing. Gearbox overrunning clutch. Hydraulic side shift cylinder fitted within the parallel arms for better protection during work. Front guard with metal flaps and rear guard with rubber. Reinforced Pto shaft. Mechanical breakaway (arm protection in case of obstacles) Cod Cod n 26 n 78 Develo ny Ferri offset mower ZME-ZTE-ZMTE-ZLE-ZHE will be supplied with parallel arms partially dismounted. Reassembling as per Ferri owner s manual will be at dealer s charge. ttachment to the tractor 3 point hitch, including PTO shaft fitting, also at dealer s charge. Side skid kits will be supplied separately. Relevant mounting as per instructions will be at dealer s charge. 19 Oil cooler with thermostat Prices and Specifications may be subject to change without notice. Prices do not include shipping or setup.