Innovative Technologies for Roadside Maintenance. Product range. Mowing. Unimog

Transcription

1 Innovative Technologies for Roadside Maintenance International Unimog System-Partner Product range Mowing Unimog

2 Working attachments for operation all year round Mowing heads Universal Cutting Head Flail Head Scrub Cutting Head Brushwood Shredding Rotor Head Flail Head UMK 1200 Cutting thickness up to 40 mm approx. 350 kg MK 1200 / 1600 Working width 1200 / Cutting thickness 20 / 20 mm approx. 350 / 370 kg GMK 1200 Cutting thickness up to 60 mm approx. 345 kg BRK 1200 shredding of shrubbery / bushes Cutting thickness up to 60 mm approx. 350 kg AMK 1200 / 1600 Working width 1200 / Cutting thickness 20 / 20 mm approx. 330 / 360 kg Attachments for hedging and siding up Stump Grinder Coarse Cutting Bar Branch / Hedge Cutter Hedge Cutting Head Free Zone Cutter BSF 500 for grinding stumps Grinding wheel diameter 500 mm Grinding depth max. 40 mm approx. 130 kg GMB 2000 cutting of branches, twigs, etc. Working width Cutting thickness 40 mm approx. 120 kg AWS 2200 cutting of branches, twigs, etc. Working width 1500 mm Cutting thickness 80 mm approx. 210 kg HSK 1200 cutting of hedges / shrubbery Cutting thickness up to 20 mm approx. 310 kg FSG 2000 clearing of walkways / roadsides Working width 2000 mm Cutting thickness up to 150 mm approx. 235 kg Earth Auger Clearing attachments Embankment maintenance Earth Auger Verge Cleaning Device Rotary Ditch Cleaner Rotary Rake Double Blade Cutter EBG drilling of holes (road signs) Auger length 900 mm Auger Diameter 250 mm approx. 110 kg BRG 1000 cleaning of overgrown verges Working width 1000 mm Cutting thickness up to 80 mm approx. 415 kg GRG 650 cleaning of roadside ditches Milling wheel diameter 650 mm Wheel speed 500 rpm approx. 245 kg KH 2500 turning / rowing up cut grass Working width 2500 mm Drive hydraulical approx. 225 kg DSW 1900 grass / shrub removal on slopes Working width 1900 mm Cutting thickness up to 10 mm approx. 130 kg Brush systems Surface Washing Brush Double Washing Brush Weed Brush Gutter / Surface Brush Snow blower Snow Blower FWB 1600 cleaning of surfaces, signs etc. Working width Brush diameter 1000 mm approx. 190 kg DWB washing of posts, signs, etc Working width 800 mm Brush diameter 600 mm approx. 200 kg WKB 750 removing of grass and weeds Working width 750 mm Brush speed 300 rpm approx. 170 kg RB 650 removing of grass and weeds Working width 650 mm Brush speed 300 rpm approx. 150 kg SFS 600 cleaning of snow behind barriers Working width 600 mm Cutting drum diameter 450 mm approx. 280 kg

3 Verge Mowers / Reflexion Post Mowers MLM 200 MRM 300 Front-mounted mowing equipment MFK 400 up to 2.5 m Control electro-hydraulical Drive The Reflexion Post Mower MLM 200 works around the guard rails, posts and traffic signs. In combination with the verge mower MRM 300 it offers a very effective and economic solution. Mowing Combinations integrated into the hydraulic system of the verge mower - Automatic touch control system to adapt to the terrain contour - Continuous distance control to the guard rail MKM 700 MLM 200 transport position up to 3 m right- / left-hand-side Drive Front PTO-shaft or vehicle hydraulics The verge mower is perfect for near roadside mowing work, either right-hand or left-hand operation. Due to its low height, this mower is suitable for use underneath crash-barriers. - Electro-hydraulic control with mowing head relief system - Road speed-related automatic obstacle detector - Automatic parking system Trio MRM 300 transport position up to 5.1 m right- / left-hand-side 1500 mm Mounted onto Unimog U20, the MFK 400 is particularly suitable for municipal use. Its flexibility and efficiency enable both road and street maintenance work to be carried out throughout the year. - Transport position in front of the vehicle - The arm can be hydraulically moved forward - Universal use by quick-changedevice MHU 800 MFK 400 transport position Rear-mounted mowing equipment The optimal geometry of the boom system makes it easy for the MKM 700 to avoid small obstacles such as traffic signs up to 2.9 m and enables quick mowing work. Front mounted mower 6.7 m (7.2 m*) 850 mm (1300 mm*) - Proportional control with CAN-Bus - Automatic parking / extending of the verge mower - Automatic touch control and arm relief system Mähtronic MLM 200 transport position The combination of the MKM 700 and the rear mounted mower MHU 800 results in an extremely efficient mowing unit, which makes it easy to mow a 3 m width in one working cycle. Front mounted mower 6.7 m (7.2 m*) Rear mounted mower up to 7.3 m Front mower 850 mm (1300 mm*) Rear mower - Arm relief system Mähtronic - The mowers can be operated independently MLM 200 transport position up to 7.3 m right- / left-hand-side The MHU 800 is quickly ready for operation as the mowing head remains in the same alignment both in working and in transport position. The lateral shift system offers additional flexibility when mowing around obstacles. - Optimized power arm geometry with high lift - Quick ready for operation without any preparatory work - To be mounted onto vehicle platform or platform frame MHU 800 transport position * after dismounting of the verge mower * after dismounting of the verge mower

4 The complete overview on the MFK 500 MFK 500-T FME 500 The perfect solution for cheap roadside maintenance: Thanks to its lateral shift and its geometry the MFK 500 is very suitable for mowing and working close to roadside as well as behind crash-barriers. up to 6 m right- / left-hand-side up to 7 m with telescopic arm 1800 mm - Transport position in front of the vehicle (equipment width in transport position 2.4 m) - Universal use by quick-changedevice MFK 500 transport position Horizontal 6.5 m / vertical 7.5 m 1800 mm The MFK 500-T is an ideal implement for cleaning walls, ceilings and lighting panels in tunnels and subways. An automatic detector with ultra sound sensors ensures that the brush adjusts automatically to the profile of the surface. - Tunnel washer for cleaning walls and ceilings. - Automatic obstacle detector with ultrasound sensors. - High-pressure cleaning system and detergent dosing system. MFK 500-T transport position up to 6.5 m right- / left-hand-side - Transport position above vehicle cab In transport position the FME 500 with its reach up to 6.5 m is parked at the rear on the platform on a parkingframe, behind the cab. This configuration provides a balanced weight distribution on the vehicle axles. - Low front axle load in transport position - Implement width in transport position only 1.5 m FME 500 transport position MHU 800 Telescope MHU 800 Parallelogram ME 700-DB up to 8.7 m right- / left-hand-side - Optimized power arm geometry with high lift - Hydraulic counterweight shift - Hydraulic wheel supports (Option) up to 7.3 m right- / left-hand-side Adjustment 1000 mm - The arm can be hydraulically moved forward from the driver s cab - Continuously adjustable - Hydraulic wheel supports (Option) up to 7.5 m right- / left-hand-side - Designed for 2-ways use - Telescopic arm hydraulically adjustable by 750 mm - Digital height limitation, proportional control With its tele scopic arm the MHU 800 bene fits from a huge reach for mow ing slopes and a high lift for pass ing over obstacles such as traffic signs. MHU 800 tel. transport position With the parallelogram arm the MHU 800 can be ergonomically moved forward up to 1000 mm into the viewing area of the operator and can pass easily over obstacles. MHU 800 Par. transport position With the ME 700-DB the MULAG mowing concept can also be used on railways. With its many alternative working implements this system is ideal for the extensive maintenance on railway embankments. ME 700-DB transport position

5 professional roadside care. FME 600 Mowing Combinations MKF 600 MKF 600 Telescope up to 7.2 m right- / left-hand-side 1300 mm The lateral shift of the FME 600 makes the arm more flexible in every field of activity. Thanks to the special arm geometry it is easy to work with to considerable reach and pass obstacles. - Balanced weight distribution in transport position - Obstacles easily passed - Implement width in transport position only 2.1 m FME 600 transport position The independent lateral shift of power arm and verge mower increases the working performance considerably, in particular when working in alleys and under crash-barriers. The MKF 600 has a compact transport position. Front mounted mower 5.5 m (6.0 m*) Hydraulic 1300 mm (1800 mm*) Verge mower up to 1000 mm - Transport width 2.5 m - CAN-Bus control / Mähtronic - Verge mower automatic touch control system and CAN-BUS MKF 600 transport position With its telescopic arm the MKF 600 offers a very big reach and can be used very effectively for mowing big slopes and cutting hedges. Front mounted mower 6.5 m (7.0 m*) Hydraulic 1300 mm (1800 mm*) Verge mower up to 1000 mm - Transport width 2.5 m - CAN-Bus control / Mähtronic - Verge mower automatic touch control system and CAN-BUS MKF 600 tel. transport position Rear-mounted mowing equipment with grass collection * after dismounting of the verge mower * after dismounting of the verge mower Gang mower SB 500 SB 600 MGM 650 up to 6.1 m right- / left-hand-side 800 mm (Option) The SB 500 combines the advantages of the telescopic arm with the Mähtronic proportional control system in a powerful mowing machine with grass collection (mulching without grass collection possible, too). - Proportional control with CAN- BUS technology - Powerful radial fan with large diameter - Grass collection into MHT 800 trailer SB 500 transport position up to 7.0 m right- / left-hand-side 800 mm (Option) - Grass collection into MHT 800 trailer through hydraulicallydriven scraper floor - Powerful radial fan with large diameter A solid double-power arm construction protects the hose - making the SB 600 extre mely reliable. One of the unique features of the grass collec ting trailer is its large loading capacity with hydraulical scraper floor. SB 600 transport position 6.5 m (front + rear equipment) Control Electro-hydraulic The MGM 650 makes it possible to mow large green areas efficiently. The innovative combination of a front- and two rearmounted mowers optimises all the vehicles features. - Large working width - Power lift for working attachments (automatic parking system / working position at the back) MGM 650 transport position measures from the center of the vehicle (including mowing head width of 1.2 m)

6 Optional features for MULAG-Mowers Mähtronic Implement Drive via N05 Hydraulic Rotating Device Automatic computer-assisted contact pressure setting of the mowing head. Sensors transmit the ground configuration to the computer which adjusts the boom functions independently. Rear mounted mowers can be driven via auxiliary drive (Code N05). Consequently, the hydraulic system of the mower is completely independent from the vehicle. The rotational range is 230, continuously adjusted via the control unit. The rotational range can be adapted during operation. Hydraulic Wheel Support Hydraulic Torsion Frame Counterweight The operator can lock the suspension of the rear wheel axle from the control panel in the cab. The operator does not have to get out the vehicle, which increases safety and operating comfort. Pressure Blowing System This blowing system is mounted in the rear brackets D50 and makes it easy to clean the road. The dirt is blown away to the roadside or in the banquet. Front axle locking device for the Unimog to prevent chassis distortion (one-side-deflection) when the arm is in mowing position, activated via a toggle switch in the driver s cab. Multifunction Joystick The form of this joystick is perfectly adapted to the human hand. Up to 4 proportional functions can be controlled at one level. Thanks to this modular system placed in the rear mounting brackets D50 it is possible to obtain up to 1400 kg counterweight by adding different weight plates. Daily working Hour Meter The distance mown effectively (per day, per week and total distance) is recorded and can be read out on the display or an external notebook. MULAG Fahrzeugwerk Heinz Wössner GmbH u. Co. KG // Subject to changes without notice, Dok 1012_326en Distributor Manufacturer MULAG Fahrzeugwerk Heinz Wössner Gmbh u. Co. KG Gewerbestraße Oppenau Germany Phone +49-(0) Fax +49-(0) info@mulag.de Web