The accessory programme of the king s class. Buckets Grabs Quick Changer Swivel Head Tiltrotator Impact Hammer Winches Others.

Transcription

1 The accessory programme of the king s class. Buckets Grabs Quick Changer Swivel Head Tiltrotator Impact Hammer Winches Others

2 The bucket programme Design You have gone for the original Hardox bucket - a quality tool in a tough design. The buckets certified with the Hardox in my Body label have a guaranteed long life expectancy. Kinematics You have also chosen the proper kinematics. Opening and closing angles are designed specifically for the Menzi Muck. Blades The buckets are constructed with wearresistant, fine-grained steel blades (Hardox 400). Material thicknesses of 25 or 30 mm are used, depending on size. The blade width of up to 250 mm is matched to the span of the bucket. This achieves outstanding stability. Bucket base and side parts Additional Hardox anti-wear strips (material thickness = 6-8 mm) reinforce the Hardox bases on the backhoes. The side tips are also produced from anti-wear Hardox 400. The Hardox bases of the grading bucket are produced with material thicknesses of up to 12 mm. digging bucket Menzi Muck Cutting width Weight Capacity Blade Bucket base Teeth A81 / A91 / A mm 211 kg 170 l 30 x 250 mm 8+8 mm 3 A81 / A91 / A mm 271 kg 290 l 30 x 250 mm 8+8 mm 4 A81 / A91 / A mm 330 kg 430 l 30 x 250 mm 8+8 mm 5 A81 / A91 / A mm 390 kg 550 l 30 x 250 mm 8+8 mm 6 A mm 150 kg 120 l 25 x 200 mm 6+6 mm 3 A mm 182 kg 205 l 25 x 200 mm 6+6 mm 4 A mm 234 kg 290 l 25 x 200 mm 6+6 mm 5 A mm 260 kg 375 l 25 x 200 mm 6+6 mm 6 Upon request... all buckets are available with alternative cutting widths, without teeth (blade only), with attaching blades and various quickchange mountings. Grading bucket The hydraulic slewable grading buckets are fitted with a large-dimension cylinder featuring check valves. They can be swivelled 50 degrees to both left and right. rigid grading bucket Menzi Muck Cutting width Weight Capacity Blade Bucket base A81 / A91 / A mm 360 kg 540 l 30 x 250 mm 10 mm A91 / A mm 420 kg 680 l 30 x 250 mm 12 mm A mm 295 kg 390 l 25 x 200 mm 10 mm hydr. slewable grading bucket Menzi Muck Cutting width Weight Capacity Blade Bucket base A81 / A91 / A mm 647 kg 600 l 30 x 250 mm 12 mm A mm 430 kg 425 l 25 x 200 mm 10 mm

3 The universal grab Full swivel The over-dimensioned, wear-free hydraulic three-phase motors in a compact design are rated not only for high axial but also high radial loads. Protected mechanism The cross-brace accommodates both: The powerful hydraulic cylinder and the synchronous steering mechanism. Tooth system Teeth angled slightly inwards ensure optimised grab characteristics, even with maximum opening widths. Under control The cylinder for the clam shell closing function is equipped with a check valve. This prevents the clam shells being opened accidentally. For external products too Over 2000 Menzi universal grabs are already in daily use in harsh industrial applications. We offer a finely-tuned programme with seven different sizes for excavators from 1 to 25 tonnes. Interesting details The Menzi universal grab was originally designed specifically for mobile walking excavators. The fact that the weight of the machine can be supported on the grab caught particular attention. Radial and axial loads were crucial to the static design. The resultant robust design is ideal for applications involving positioning and movement, such as the removal of rocks or demolition work. Ideally, there should be two double-acting hydraulic circuits on the machine side. If only one circuit is available, the open/close and swivel left/right functions can be electrically switched via an additional directional control valve. Type UG02 UG04 UG05 UG08 UG12 UG15 UG20 Excavator weight class t Capacity l Rotor axial load capacity t Rotor radial load capacity t Weight without attachment plate kg (467) A Dimension mm B Dimension mm C Dimension mm D Dimension mm E Cutting width mm Teeth Tooth system ME ME KingMet Esco Esco Esco Esco Max. closing force kn Max. oil volume grab / rotate l/min. 25 / 8 25 / / / / / / 66 Max. working pressure grab / rotate bar 250 / / / / / / / 200 Hose connections, grab action G3/8" M18x1.5 M18x1.5 G3/4" G1" G1" SAE1" Hose connections, rotate action G3/8" M18x1.5 M18x1.5 G1/2" G1/2" G1/2" G1/2"

4 The demolition and sorting grab Full swivel The over-dimensioned, wear-free hydraulic three-phase engines in a compact design are rated not only for high axial but also a high radial load. Protected mechanism The cross-brace accommodates both the powerful hydraulic cylinder and the synchronous steering mechanism. Under control The cylinder for the clam shell closing function is equipped with a check valve. This prevents the clam shells being opened accidentally. Hardox swap blades The entire range of demolition and sorting grabs is fitted with a bolted swap blade. Grid buckets The grid buckets are made from highstrength, fine-grained Hardox 400 steel. Interesting details Apart from the grid buckets, this range is based on the technical design of the Menzi universal grab (see Page 3). Type AG05 AG08 AG12 AG15 AG20 Excavator weight class t Rotor axial load capacity t Rotor radial load capacity t Weight without attachment plate kg A Dimension mm B Dimension mm C Dimension mm D Dimension mm E Excavation width mm Max. closing force kn Max. oil volume, open/close l Max. oil volume, rotate action l Max. operation pressure, grab action bar Max. operation pressure, rotate action bar Hose connections, grab action M18 x 1.5 G3/4" G1" G1" SAE1" Hose connections, rotate action M18 x 1.5 G1/2" G1/2" G1/2" G1/2"

5 The hydraulic quick-changer Rational tool change The operator can change the tool as required easily, quickly and safely, without leaving the machine. Practically full power efficiency thanks to the compact design. Zero play lock A hydraulic cylinder with integrated check valve acts permanently on the front pins of the attached tool. This prevents play from developing between the quick changer and the tool. Activation A separate auxiliary circuit is required for activating the locking mechanism of the fully hydraulic quick changer. Face bucket and backhoe The hydraulic quick-changer fits onto the original tool holder on the Menzi Muck. No expensive attachment plates required. Buckets can also be attached in the reverse direction. Menzi Muck A61 A81 A91 A in mm B in mm Hydraulic system 2-circuit system 2-circuit system 2-circuit system Constant pressure 60 bar 30 bar 30 bar Installation (Excavator) Additional hydraulic circuit Additional hydraulic circuit Additional hydraulic circuit The hydraulic swivel head Powertilt Swivelling the tool The Powertilt swivel head brings your tool into position. Buckets and other attachments can be continuously swivelled to the side, so increasing flexibility. Maintenance All internal parts are maintenance-free. They are lubricated by the flow of hydraulic oil. Strong wiper rings prevent the intrusion of dirt and water. Designs With quick-change aid: the attachment can be mounted using hooks, the rear pins are inserted manually. With hydraulic quick-changer: easy tool change operation using the joystick, no need for the operator to leave the cab. Version with hydraulic quick changer Menzi Muck (Type) A61 (PTS-08) A81 (PTA-09) A91 (PTA-09) Oil volume l/min Working pressure max. bar Swivel torque max. Nm '620 Holding torque max. Nm '240 Swivel angle Weight kg

6 The Tiltrotator 1 device - 4 functions Endless rotation in both directions, 40 degree lateral swivel to left and right, hydraulic quick-changer and a hydraulic additional function. The rotating and swivel movement allow a new, more rational mode of operation, unexpected corners and angles can now be reached. Activation All functions are controlled by solenoid valves and can be activated simultaneously. Type EC10 EC15 Width A mm Width B mm Width C mm Lenght D mm Height E mm Weight kg ab 250 ab 340 Swivel range 2 x 40 2 x 40 Oil volume l/min Working pressure MPa Special design & accessories For Menzi, the tiltrotator comes in a special, more powerful design. Accessories such as hedge shears, compression plate, universal grab expand its range of use. The hydraulic impact hammer Enclosed housing In a slim, functional package, the new housing comes as a single piece. There are no protruding side bolts or screw fasteners. The hammer is fully protected from outside influences (impact and dust). The tempered bull bar protects the housing from wear and damage. Maximum impact energy The long piston impact achieves virtually unrivalled impact energy with minimum force. The pistons are specially hardened and heat-resistant. Attachment The attachment plate is fastened to the hammer with 10 screws. Attachment plates are available in various designs. Technology A high-pressure accumulator prevents pressure fluctuations and guarantees regular powerful impact. The perfect vibration dampening system reduces noise and vibrations to a minimum. You can use the dual-speed control system to adjust the impact frequency to the hardness of the rock (RHB 313-V BA only). Attachment and options Automatic chisel lubrication (option on RHB 313) prolongs service life. Chisels High-quality chisels of various designs (such as pointed and flat chisels) with large diameters ensure optimised use of energy. Type (Silenced Serie) RHB 309 BA RHB 313-V BA Weight kg Oil volume ~ l/min Working pressure bar Impact rate 1/min level: , 2. level: Max. impact energie Joule level: 2500, 2. level: 2150 Tool diameter mm Excavators to 7,0 12,0 10,0 16,0

7 The security and drawing winch Application The winch, designed specifically for Menzi Muck, secures the machine on extremely steep slopes and also permits occasional ridge work. Weight with cable 395 kg Mounting The winch is mounted to the Menzi Muck chassis using a quick-release system. 2 cable directions Forwards draw for simple ridge applications, backwards draw to secure the machine. Handling The winch is activated via a toggle switch in the cab. It is controlled by a proportional foot pedal. Swivel pulley The swivel pulley ensures the cable is routed straight, even if drawed diagonally. Requirement To operate the winch, the Menzi Muck must be fitted with the winch preparation option (activation and hydraulic connections). Max. cable length Rope Draw force inwards Draw force outwards Max. speed of cable Working pressure 75 m 14 mm 80 kn 61 kn 25 m/min. 280 bar Mechanical override The drum is uncoupled, allowing the cable to be extended by hand. The forestry winch Professional ridge work The Menzi Muck forest winch was developed to meet the tough requirements for ridge operation. It can also be used to secure the machine. Mounting and cable direction The forest winch is mounted to the Menzi Muck chassis using a quick-release system. A switch system allows the cable draw direction to be changed with just a few hand movements. Technical description Hydraulically-driven single drum winch with integrated planetary gear. Hydraulically-ventilated spring-loaded multiple-disk brake. Load sink brake is the operating brake. Handling The winch is activated via a toggle switch in the cab. It is controlled by a proportional foot pedal. Delivery and retraction The hydraulic cable delivery generates a pretension, which keeps the cable between drum and delivery constant at all times. When drawed in, the cable is wound on the drum in neat layers. Remote control (option) The following functions can be operated remotely: extending and retracting the cable; starting and stopping the engine; switching between idling and preset speed; emergency stop. Weight with cable Cable length Rope Draw force inwards* Draw force outwards* Oil volume Max. speed of cable up to 565 kg 120 m 12 mm kg kg 100 l / min. 120 m / min. * winching capacity may vary depending on national safety

8 Other accessories Accumulating felling head The accumulating felling head was developed specifically for harvesting energy wood from thinning stands. The well-designed unit allows you to harvest multiple tree stems in the felling head before having to empty the harvester. This minimises machine movements and while markedly increasing productivity. Hydraulic hedge shears You can use the hydraulic hedge shears to cut and clear wood in a single working process. Depending on the hardness of the wood, the shears can cut through trunks with diameters of up to 280 mm. Sitting safely and comfortably in the excavator - protected from the wind and cold - you can cut trees, shrubs, hedges and bushes in an streamlined manner. Mowers Mulching involves a multitude of tasks. Depending on the material, from grass to strong shrubs and small trees, a mower has to satisfy various requirements. Mallet mowers with swinging tools, chain mowers or forest mowers with fixed tools are recommended for the optimum result. Forest mowers for undergrowth and small trees Harvester unit All standard harvester units can be attached to the Menzi Muck. A walking foot is designed to match the selected harvester head. We recommend the Harvester Woody 50; robust and highly versatile, also suitable for foliage and knee timber. If the feed unit is folded up, it can also be used as a full handling grab. Ground drills We are the ideal partner for the most diverse drilling work. From simple blast holes to anchor holes to complex superimposed holes. We collaborate with expert partners to offer integrated, tailored solutions. With all-terrain capability, high hydraulic capacity and outstanding lifting force, the Menzi Muck excels as a carrier machine for ground drills. Mallet mowers for grass and reeds Chain mowers for undergrowth and small trees Menzi Muck AG Maschinenfabrik Telefon +41 (0) CH-9443 Widnau/Switzerland Fax +41 (0) info@menzimuck.com