EN TRA ENGINEERING AND TRADING SRL

Size: px
Start display at page:

Download "EN TRA ENGINEERING AND TRADING SRL"

Transcription

1 Foundation Equipment Grabs for diaphragm wall and piling Hydraulic Casing oscillators Power Packs Casing joints Stop-end pipes Water stop elements Hydraulic extractors Piling tools and accessories MADE IN ITALY

2 ENT.RA. is a specialized engineering company manufacturing high quality equipment for foundation works, marine works and civil engineering special requirements. ENT.RA. equipment range includes heavy duty mechanical grabs for diaphragm walls and piling, hydraulic grabs, hydraulic casing oscillators for casing driving, casing pipes and joints, hydraulic casing extractors for stop-end pipes and water stop sheet piles with mechanical and hydraulic detachment system. Piling tools and accessories are also part of the range. ENT.RA. is currently worldwide supplying private and public sectors for civil engineering works, industrial infrastructures and residential buildings. EN TRA ENT.RA. products meet high standard requirements with certified materials and workmanship. Qualified workshop and on site technicians are trained to ensure high quality products and assembly.

3 GRABS ENT.RA. manufactures a wide range of grabs for foundation works designed to meet challenging job site requirements: BDM series mechanical grabs for diaphragm wall excavations, ranging from 5 to 15 tons weight BDR series mechanical grabs for heavy soil formations, weighting from 7 to 20 tons BPM series specially made to be used inside casings and with the capability to be used as hammer grabs BDH series fully hydraulic grabs suitable for applications to hydraulic cranes or with separate power packs Grabs can be supplied with rectangular or semi-circular jaws and guides interchangeable on a base grab body High tensile steel, hard cased pins and rollers are standard supply. Hardox welding protection is a provided to protect wearing parts. products are all made of certified materials and welding procedures.

4 BDM418 GRABS Diaphragm Wall Grabs BDM 418 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 6500 Height with closed jaws* D mm 7000 Weight ton Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3000 mm opening width The above specifications may be subject to modification without prior notice. BDM 418 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than 25 tons. Rectangular or semi-circular jaws sections equipped with BOFORS or ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. The vertical and horizontal edges of the jaws are made of special hardened steel, with hardness 500 HB. A hoist assembly made of 4 large diameter pulleys, each mounted on two roller bearings. Pins are made of hardened steel are and mounted to wear-resistant bushes. A couple of lateral guides and soil ejectors are supplied. An optional stabilizer bar is also available. Rev.02/14

5 BDM620 Diaphragm Wall Grabs BDM 620 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 8100 Height with closed jaws* D mm 8500 Weight ton ,5 15 Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3000 mm opening width The above specifications may be subject to modification without prior notice. BDM 620 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than 80 tons. Rectangular or semi-circular jaws sections equipped with BOFORS or ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. The vertical and horizontal edges of the jaws are of a special hardened steel, with hardness 600 HB. A hoist assembly made of 5 large diameter pulleys, each mounted on two roller bearings. Pins are made of hardened steel are and mounted to wear-resistant bushes. A couple of lateral guides and soil ejectors are supplied. An optional stabilizer bar is also available.

6 BDM825 Diaphragm Wall Grabs BDM 825 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 9000 Height with closed jaws* D mm 8200 Weight ton Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 2500 mm opening width The above specifications may be subject to modification without prior notice. BDM 825 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than 60 tons. Rectangular or semi-circular jaws sections equipped with BOFORS or ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. Carriage complete with 4 Berco rollers. The vertical and horizontal edges of the jaws are of a special hardened steel, with hardness 500 HB. A hoist assembly made of 5 large diameter pulleys, each mounted on two roller bearings. Pins are made of hardened steel are and mounted to wear-resistant bushes. A couple of lateral guides and soil ejectors are supplied. Verticality guide assembly is also available.

7 BDR420 Diaphragm Wall Grabs BDR 420 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 6800 Height with closed jaws* D mm 7300 Weight ton Pull ratio n. 4/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 2500 mm opening width The above specifications may be subject to modification without prior notice. BDR 420 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than 30 tons. Considerable weight, pull ratio 4/1 and the quality construction materials of the grab make BDR 420 the ideal equipment for excavation works in soil of hardness 350 Mpa. Rectangular or semi-circular jaws sections equipped with ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. Carriage complete with 4 Berco rollers. The vertical and horizontal edges of the jaws are of a special hardened steel, with hardness 600 HB. Hoist assembly made of 4 large diameter pulleys, plus an auxiliary one, mounted on two roller bearings with internal lubrication system. Rope and reversing pulleys are installed ready for operation and replaceable in few minutes. Pins are made of hardened steel are and mounted to wear-resistant bushes. A couple of lateral guides and soil ejectors are supplied. Chisel assembly is also available.

8 BDR620 Diaphragm Wall Grabs BDR 620 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 8500 Height with closed jaws* D mm 9000 Weight ton Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3000 mm opening width The above specifications may be subject to modification without prior notice. BDR 620 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than100 tons. Considerable weight, pull ratio 5/1 and the quality construction materials of the grab make BDR 620 the ideal equipment for excavation works in soil of hardness 400 Mpa. Rectangular or semi-circular jaws sections equipped with ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. The vertical and horizontal edges of the jaws are of a special hardened steel, with hardness 600 HB. A hoist assembly made of 5 large diameter pulleys, each mounted on two roller bearings. Pins are made of hardened steel are and mounted to wear-resistant bushes. A pair of lateral guides and soil ejectors are supplied. Chisel assembly is also available.

9 BDR825 Diaphragm Wall Grabs BDR 825 Description ref. units Data Jaws thickness mm Jaws opening min - max A mm Guides width range min - max B mm Height with open jaws* C mm 8500 Height with closed jaws* D mm 9000 Weight ton Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3500 mm opening width The above specifications may be subject to modification without prior notice. BDR 825 diaphragm wall grab is designed to be operated in conjunction with a double-winch crane of capacity not less than120 tons. Considerable weight, pull ratio (5/1) and the quality construction materials of the grab make BDR 825 the ideal equipment for excavation works in soil of hardness 400 Mpa. Rectangular or semi-circular jaws sections equipped with ESCO teeth are available. Guides of different dimensions are interchangeable on the same grab body. The vertical and horizontal edges of the jaws are of a special hardened steel, with hardness 600 HB. A hoist assembly made of 5 large diameter pulleys, each mounted on two roller bearings. Pins are made of hardened steel are and mounted to wear-resistant bushes. A couple of lateral guides and soil ejectors are supplied. Chisel assembly is also available.

10 BPM-P Hammer Grabs BPM - P Description Ref. Units Data Jaws diameter A mm Casing diameter mm Height with coupling bell B mm Height with double rope system C mm Weight ton Jaws capacity l Pull ratio n. 6/1 Rope diameter mm (*) The above specifications may be subject to modification without prior notice. BPM P hammer grabs are designed for the execution of cased foundation piles with percussion system. BPM-P grabs can be operated by single rope by means of an automatic coupling head or with upper separator double rope sling. Single rope assembly is recommended for loose materials and for cleaning inside of casings. Double rope application is designed for cohesive soil and hard strata chiselling. Various diameter jaws kit can be applied to the same grab body by replacing the grab collar.

11 BPM-M Hammer Grabs Single Rope Double Rope BPM - M Description ref. units Data Jaws diameter A mm Casing diameter mm Height with coupling bell H1 mm Height with double rope system H2 mm Weight ton Jaws capacity l Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3000 mm opening width The above specifications may be subject to modification without prior notice. BPM M hammer grab is designed for the execution of cased foundation piles with percussion system. BPM-M grabs can be operated by single rope by means of an automatic coupling head or with upper separator double rope sling. Single rope assembly is recommended for loose materials and for cleaning inside of casings. Double rope application is designed for cohesive soil and hard strata chiselling. Various diameter jaws kit can be applied to the same grab body by replacing the grab collar.

12 BPM-G Hammer Grabs BPM G Description ref. units Data Jaws diameter A mm Casing diameter mm Height with double rope open jaws B mm Height with double rope clased jaws C mm Weight ton Jaws capacity lt Pull ratio n. 5/1 Rope diameter mm (*) Values referred to grab with rectangular section jaws of 3000 mm opening width The above specifications may be subject to modification without prior notice. BPM G hammer grabs are designed for the execution of cased foundation piles with percussion system. BPM-G grabs can be operated with upper separator double rope sling. Double rope application is designed for cohesive soil and hard strata chiselling. Various diameter jaws kit can be applied to the same grab body by replacing the grab collar.

13 BDH520 Hydraulic Grabs BDH series are hydraulically operated grab specially designed to work with base crawler cranes. The main frame of the grab can be fitted with interchangeable guides and jaws from 500 to 1200 mm thickness with opening width from 2000 to 3500 mm. The units can be equipped with single cylinder or double hydraulic cylinders with control piston rods to synchronize the jaws opening/closing operations. Interchangeable guides and jaws for various excavation dimensions are available. Jaws can be provided in rectangular or semi-circular sections.

14 CASING OSCILLATORS manufactures two series of hydraulic casing oscillators: GA-C GA-S Hydraulic casing oscillators short type to be attached to a base piling rig Hydraulic casing oscillators long type to be attached to a base crane with the option to be operated by a separate power pack casing oscillators are provided with a clamp assembly made of 5 articulated segments, 2 synchronized oscillating rams with the possibility to operate automatically, a mobile carriage with hydraulic ram for centring the position of the clamp assembly at the front. The units are complete with remote control panel, hydraulic and electric systems. A casing verticality control is an optional supply

15 GA-C Casing Oscillators GA-C casing oscillator series are designed to work in conjunction with rotary rigs or hydraulic cranes. The clamp assembly is made of 5 articulated segments, constructed to provide appropriate tolerance and grip on the casing tube. The two oscillator rams are designed to produce a synchronized alternate rotating movement of the clamp assembly, their motion being automatically reversed by two end/of/travel switches. The mobile carriage is provided with a hydraulic ram, together with its hydraulic supply hoses, or centring and adjusting the position of the clamp assembly at the front. A special hydraulic circuit allows free movement of the telescopic stabilizer during other operation of the equipment. A brake assembly composed of 4 articulated segments complete of hydraulic ram. Hydraulic plant for the supply of hydraulic oil, at pressure, to the hydraulic rams either by means of the hydraulic system of a crane. Electric plant to supply the necessary power, from the hydraulic power pack or other power source, to the electro-hydraulic distributors, end/of/travel switches and remote control panel is provided. A 24 volts supply is required. A control device to control the verticality of the casing tube during the insertion phase can be supplied upon request.

16 GA-C Casing Oscillators CASING OSCILLATOR GA-C Description ref. units Data Casing diameter A mm Minimum diameter B mm Width C mm Length D mm Height E mm Minimum height of collar F mm Height of rear mounting G mm Distance from casing axis I mm Telescopic drawbar stroke L mm Lifting force kn Lifting stroke P mm Clamping force kn Number of clamping segments n Torque knm Oscillation angle deg Braking force kn Maximum pressure bar Weight ton (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

17 GA-S Casing Oscillators Casing oscillator GA/S series are designed for deep casing driving, when a proper equipment weight, considerable torque and a wide angle of oscillation are required. GA/S units are driven by a hydraulic power pack when attached to a crawler crane as base rig or driven by the main hydraulic system of a large size piling machine. GA/S clamp assembly is made of 5 articulated segments, manufactured to provide proper grip on the casing tube. The unit is equipped with two oscillator rams developing a synchronized alternate rotating movement of the clamp assembly and their motion can be automatically reversed by two end/of/travel switches. The mobile carriage is fitted with a hydraulic ram for centring and adjusting the position of the clamp assembly at the front. A special hydraulic circuit allows free movement of the telescopic stabilizer during other operation of the equipment. A brake assembly composed of 4 articulated segments complete of hydraulic ram is installed. Hydraulic system for the supply of hydraulic oil to the rams is provided. Electric System to supply the necessary electric power for circuits is installed on board. A 24 volts supply is required from the hydraulic power pack or other power source, to the electro-hydraulic distributors, end/of/travel switches and remote control panel. An inclination of ± 5 left/right can be applied and controlled by transducers and visually monitored by a display mounted on the remote control panel. A verticality control device with monitors to control of the casing tube verticality during the insertion operations can be supplied upon request. The unit is supplied with wired remote control panel for main operations. On board distributors can be also manually operated for troubleshooting.

18 GA-S Casing Oscillators CASING OSCILLATOR GA/S Description ref. units Data Casing diameter A mm Minimum casing diameter B mm Width C mm Length D mm Height E mm Minimum height of collar F mm Height of rear mounting G mm Distance from casing axis I mm Telescopic drawbar stroke L mm Forward tilt α mm Rearward tilt β mm Lifting force kn Lifting stroke P mm Clamping force kn Number of clamping segments no Torque knm Oscillation angle Braking force kn Maximum pressure Bar Weight Ton 9 12,5 16, (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

19 IPP Hydraulic Power Pack IPP Hydraulic Power Pack Description units Data Models type IPP65 IPP100 IPP200 IPP250 IPP280 IPP300 Diesel engine power kw Hydraulic pumps oil delivery L/min Working pressure bar 300 Piston pumps displacement type automatic Oil tank capacity L Weights kg Width A mm Length B mm Height C mm (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice IPP Hydraulic Power packs are designed to power casing oscillators GA-C and GA-S series. The units are fitted with water cooled diesel engine, hydraulic system, hydraulic pumps to feed the casing oscillator circuits, hydraulic oil cooler, electric system and all the other required parts and components. The main frame is soundproofed as per EU regulations and it is mounted on a heavy duty skid for safe placement on site. Lifting hooks for transportation are provided. A complete panel indicator with gauges for fuel, oil, pressure and safety stop is installed. A radio remote control is also available on request.

20 CASINGS Casing pipes to be used with hydraulic casing oscillator are made of high quality carbon steel in accordance with UNI EN grade S355JR. Parts are made by means of numeric control late machineries and assembled by highly specialized welders and technicians. Casing pipes are supplied with double wall steel pipes and joints for a better cased pile verticality and easy excavation inside the pile by drilling tools. For large size diameters, single wall cased pipes are also available, with bottom casings applied with cutting shoes always double walled. Casing pipes can be provided with additional tools and accessories, such as: Adapter to connect the casing to a piling rig rotary table A casing funnel as protection for the casing joint and for making insertion of the drilling tools easy; A lifting head for quick assembly and dismantling of the casings without damaging the conical rings.

21 CASING PIPES Single Wall Double Wall CASING PIPES double wall Description ref. units Data Outer diameter e mm Inner diameter i mm Outer wall thickness S1 mm Inner wall thickness S2 mm Length L mm 1 to 6 meters Longitudinal bars no (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice CASING PIPES single wall Description ref. units Data Outer diameter e mm Inner diameter i mm Outer wall thickness S mm Length L mm 1 to 6 meters (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

22 CASING JOINTS CASING JOINTS standard type Description ref. units Data Outer diameter e mm Inner diameter i mm Conical screws X no Bushes Y no Centering keys no (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice Casing joints are made up of the following components: One male half-joint One female half-joint One set of conical bushes One set of threaded bushes One set of coupling bolts One set of positioning keys One set of O-rings Casing joints can be supplied with provision for the welding of single wall or double wall on request.

23 CASING SHOES CASING SHOES Description ref. units Data Outer diameter e mm Inner diameter i mm Tooth type 1 no Tooth type 2 no Tooth type 3 no Tooth type 4 no Tooth type 5 no (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice Type Use and applications Detritus type soils such as sand, gravel, broken stones, rock strata, boulders, foundation remnants etc. Robust teeth flame-cut from full, with narrows tooth spaces. The teeth are provided with a special hard facing hardness 600 HB Detritus type soils such as sand, gravel, broken stones, rock strata, boulders, foundation remnants etc. Robust body with buttons made of tungsten carbide. Universal applications, also for rocky ground and construction of pile walls. Robust body with buttons made of tungsten carbide. Detritus-type soils and rocks, construction of pile walls. Robust body with buttons made of tungsten carbide. Detritus-type soils and rocks, construction of pile walls. Heavy duty with buttons made of tungsten carbide. Cutting shoes are designed and equipped according to the soil layers to be bored since continuous turning of the casing can be effective when the pressure on the casing, the shape of teeth and inclination are properly designed. The equipment of a casing shoe must be selected according to soil condition and layer strata.

24 HPE STOP-END PIPES EXTRACTORS HPE Hydraulic extractors have been designed for the extraction of stop end pipes from diaphragm wall foundation to 50/60 meters depth. The clamp assembly is made of 3 articulated segments, manufactured to provide appropriate tolerance and grip on the casing tube. The unit is provided of a brake assembly composed of 4 mechanical wedges. Hydraulic plant for the supply of hydraulic oil to the hydraulic rams from a power pack is installed. A remote control panel to operate the unit is also available as an optional supply.

25 HPE STOP-END PIPES EXTRACTORS HPE stop end pipes extractors Description ref. units Data Casing diameter A mm Minimum diameter mm Width B mm Length C mm Height D mm Lifting force kn Lifting stroke mm Clamping force kn Number of clamping segments Nr Maximum pressure Bar Weight Ton (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

26 DIAPHRAGM WALL STOP-END WATER STOP PROFILE STANDARD PROFILE DIAPHRAGM WALL STOP-END WATER STOP PROFILE Description units Data Diaphragm wall thickness mm Stop-end width A mm Lifting hole center distance H mm 750 Stop-end element length L m 1.5 / 3 / 6 / 9 / 12 Weight per meter kg (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice DIAPHRAGM WALL STOP-END STANDARD Description units Data Diaphragm wall thickness mm Stop-end width A mm Lifting hole center distance E mm 750 Stop-end element length F m 1.5 / 3 / 6 / 9 / 12 Weight per meter kg (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

27 HLE DIAPHRAM WALL STOP-END EXTRACTORS Hydraulic equipment designed for the extraction of diaphragm wall stop-end sheet piles width 600 to 1200 mm The unit is operated by a power pack and it is composed of heavy duty base frame with two trapezoid sliding columns maneuvered by 4 hydraulic rams with 750 mm stroke. The system is complete with locking system pins to ensure the stop end sheet piles to the sliding frames and to prevent dropping of the column.

28 HLE DIAPHRAM WALL STOP-END EXTRACTORS HPE diaphragm wall stop-end extractor Description units Data Stop-end sections mm 600 to 1200 Width A mm 1860 Length B mm 2000 Height C m 3000 Lifting stroke mm 800 Maximum pressure bar 320 Weight ton 5 (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice IPE power pack Description units Data Diesel engine power kw 35 Fuel tank capacity L 100 Oil delivery L/min. 80 Noise level db (A) 75 Oil cooler type standard Weight ton 1.5 (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

29 TOOLS and ACCESSORIES can design and provide any type of piling tool to be manufactured to meet customer requirements. Various type of tools for heavy rock, clay and sandstone soil formations are available to be applied to high capacity piling rigs. tools and accessories are manufactured with high quality steel materials, wearing parts protected with manganese coating. Interchangeable equipment with rock bullets teeth, soil teeth and easy replaceable central bits, kelly boxes ranging from 130x130 mm to 200x200 mm are standard supply. Production range also includes CFA augers, Soil Displacement, FDP and Soil Mixing tools, equipped with water tight joints hexagonal or multi-lugs type. Tremie pipes, Chisels, Lifting Heads, Rope Swivels, Kelly Box Reductions and other accessories are part of the production range.

30 TOOLS HEAVY DUTY ROCK AUGERS FDP SOIL DISPLACEMENT SOIL AUGERS CHISELS CORE BARRELS BELLING BUCKTES CASING TWISTERS CFA AUGERS

31 TREMIE PIPES TREMIE PIPES Description units Data Outer diameter mm 219 / / / 10 Joint diameter mm Pipe thickness mm Pipes length m 1 to 2 meters Coupling rope diameter mm Seals no (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice TREMIE PIPES RACK Description units Data Pipes outer diameter mm 219 / / / 10 Rack width mm Rack length mm Rack height mm 2200 Rack pipes storing capacity no (*) The above specifications are indicative only and in no way binding. The right is reserved to alter the data without prior notice

32 EN TRA Tel Fax

Advanced Foundation Technology and Equipment

Advanced Foundation Technology and Equipment Advanced Foundation Technology and Equipment Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs

More information

Casing Rotator Casing Oscillators Casings up to 3000 Special Hammer Grab Chisels Interlocking Tremie Pipes

Casing Rotator Casing Oscillators Casings up to 3000 Special Hammer Grab Chisels Interlocking Tremie Pipes Casing Rotator Casing Oscillators Casings up to 3000 Special Hammer Grab Chisels Interlocking Tremie Pipes Hydraulic Casing Rotator RDM/RDM-M Hydraulic Casing Rotator Type RDM Type RDM-M A A H2 H1 H2 H1

More information

CH 450. High Tech Line. Self-Erecting Hydraulic Piling Rig

CH 450. High Tech Line. Self-Erecting Hydraulic Piling Rig CH 450 High Tech Line Self-Erecting Hydraulic Piling Rig CH 450 MULTIPURPOSE HYDRAULIC RIGS FOR DIFFERENT DRILLING TECHNOLOGIES. The winning solution for job sites that require fast operating times. Truly

More information

EK40 MULTI-PURPOSE PILING RIG

EK40 MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK40 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production

More information

EK60 MULTI-PURPOSE PILING RIG

EK60 MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG MULTI-PURPOSE PILING RIG The GEAX EK60 is a multi-purpose piling rig designed to achieve the highest levels of versatility, manoeuvrability, ease of use, transportation, production

More information

CH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line

CH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line CH 650 Self-Erecting Hydraulic Piling Rig High Tech Line CH 650 The Comacchio self-erecting rigs are available in CPD (Cilynder Pull Down) and WPD (Winch Pull Down) versions and both are designed for easy

More information

EK90 GEAX MULTI-PURPOSE DRILLING RIG

EK90 GEAX MULTI-PURPOSE DRILLING RIG www.geax.it EK90 EK90 is a multi-purpose drilling machine designed to reach the highest grade of versatility, ease of use, easy transportation, working speed and low maintenance. It can work with different

More information

The most complete line of drilling rigs...

The most complete line of drilling rigs... PRODUCTS RANGE The most complete line of drilling rigs... MAIT, a world leader with more than 50 years experience in manufacturing hydraulic drilling rigs, presents its wide range of machines able to satisfy

More information

EK90 GEAX MULTI-PURPOSE PILING RIG

EK90 GEAX MULTI-PURPOSE PILING RIG EK90 EK90 The EK90 is a multi-purpose piling rig designed to achieve the highest levels of versatility, ease of use, manoeuvrability, transportation, production and reliability. It is configured to operate

More information

Hydraulic Diaphragm Wall Grab Mechanical Diaphragm Wall Grab Stop End Pipes Hydraulic Tube Extracting Equipment Interlocking Tremie Pipes

Hydraulic Diaphragm Wall Grab Mechanical Diaphragm Wall Grab Stop End Pipes Hydraulic Tube Extracting Equipment Interlocking Tremie Pipes Hydraulic Diaphragm Wall Grab Mechanical Diaphragm Wall Grab Stop End Pipes Hydraulic Tube Extracting Equipment Interlocking Tremie Pipes Hydraulic Diaphragm Wall Grab H Technical Data Hydraulic tilting

More information

CH 650. High Tech Line. Self-Erecting Hydraulic Piling Rig

CH 650. High Tech Line. Self-Erecting Hydraulic Piling Rig CH 650 High Tech Line Self-Erecting Hydraulic Piling Rig CH 650 The Comacchio self-erecting rigs are available in CPD (Cilynder Pull Down) and WPD (Winch Pull Down) versions and both are designed for easy

More information

FOUNDATION EQUIPMENT THE RANGE OF OUR PRODUCTS

FOUNDATION EQUIPMENT THE RANGE OF OUR PRODUCTS FOUNDATION EQUIPMENT THE RANGE OF OUR PRODUCTS HYDRAULIC PILING RIGS XP SERIES The new line of high performance products featuring state-of-the-art technology and operational competitiveness. The XP series

More information

ПК _02 FOUNDATION EQUIPMENT. casagrande

ПК _02 FOUNDATION EQUIPMENT. casagrande ПК 11-1121 _02 FOUNDATION EQUIPMENT casagrande »A Malignant, / -.ид?,* с-, Itafy 0ntanafreMa < p N) 'ISO 9001:1994 Macchinari per fondazioni. Implant/per centrifugal!. ovndafign equipment. M&c/ifnery and

More information

HPM 250 DRILLING RIG PRESENTATION HPM 250. HPM 250 Short Mast

HPM 250 DRILLING RIG PRESENTATION HPM 250. HPM 250 Short Mast HPM 250 HPM 250 DRILLING RIG PRESENTATION Hpm 250 machine was designed to perform large diameters piling, also on lands particularly challenging. 3000 10 ft Even if It has remarkable performances, also

More information

BG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70

BG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70 BG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70 Dimensions Crowd winch type The BG 25C rotary drilling rig has an operating weight of approx. 74 to and a torque of 245 knm. It is ideally suited for:

More information

SONICOR 50K DRILL HEAD

SONICOR 50K DRILL HEAD SONICOR 50K DRILL HEAD The SONICOR 50K sends high frequency mechanical oscillations down the drill string to the bit. The operator controls frequencies to suit specific conditions of soil/rock geology.

More information

SR-50 LDP CFA BFS DP SR-50. Hydraulic Rotary Rig

SR-50 LDP CFA BFS DP SR-50. Hydraulic Rotary Rig SR-50 LDP CFA BFS DP Hydraulic Rotary Rig SR-50 Rotary Soilmec rotaries are designed and manufactured to meet the need for increased production and performance on various applications, with the added benefit

More information

BUILT ON TRUST CASING OSCILLATOR

BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST SHAFT DRILLING FOR LARGE BORED PILING STRONG OSCILLATING TORQUE AND LIFTING FORCE BORE PILING FOR BIG STRUCTURE BUILDING 2 BUMA CE CO.,LTD. Company BUMA

More information

CM-70 HYDRAULIC CFA ROTARY RIG. In 1990 Soilmec was awarded with the certification of its Quality System complying with ISO 9001/UNI standards.

CM-70 HYDRAULIC CFA ROTARY RIG. In 1990 Soilmec was awarded with the certification of its Quality System complying with ISO 9001/UNI standards. 04/2005 1500 N Tuttastampa CM-70 In 1990 Soilmec was awarded with the certification of its Quality System complying with ISO 9001/UNI 29001 standards. SOILMEC S.p.A. CM-70 HYDRAULIC DRILLING CFA ROTARY

More information

Horizontal Directional Drilling Rigs t

Horizontal Directional Drilling Rigs t Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal

More information

Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP

Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialized in Horizontal

More information

DeltaBase 102 Technical Data Sheet

DeltaBase 102 Technical Data Sheet Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key

More information

ATV ROTA-SONIC DRILL RIG (LS600)

ATV ROTA-SONIC DRILL RIG (LS600) ATV ROTA-SONIC DRILL RIG (LS600) TECHNICAL DATA SHEET GENERAL DESCRIPTION The GeoSonic Large Sonic (also known as the LS600 ATV) is a self-contained drill rig especially designed for sonic drilling through

More information

Rock Drilling Rig with Prime Double Rod System and with on board pump

Rock Drilling Rig with Prime Double Rod System and with on board pump Made in Germany Rock Drilling Rig with Prime Double Rod System and with on board pump HDD-Compact Rig for rock drilling equipped with double rod magazine First rock drilling rig in this high-performance

More information

DeltaBase 540 Technical Data Sheet

DeltaBase 540 Technical Data Sheet Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling

More information

Right rotation. Left rotation

Right rotation. Left rotation HAND AUGER 35 to 150 mm CONTINUOUS FLIGHT AUGERS HAND AUGER Thread - auger 22 conical 20/27 Square rod 23 Square rod 32 35 F5 01003501 - - - 46 F5 01004602 - - - 63 F5 01006302 F5 01006303 F5 01006301-80

More information

P.12 P.23 P.24 P.26 DRILLING RIGS AND ACCESSORIES

P.12 P.23 P.24 P.26 DRILLING RIGS AND ACCESSORIES DRILLING RIGS AND ACCESSORIES P.12 HEAVY DYNAMIC PENETROMETER AND DRILLING RIGS APAFOR APAFOR 50 APAFOR 100 APAFOR 200 APAFOR 220 APAFOR 330 AND 340 APAFOR 430 APAFOR 450 RS APAFOR 450 APAFOR 550 AND 560

More information

(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 49

(Construction) Minimum credit to be achieved at, or above, the level of the qualification: 49 Qualification Title: Level 2 NVQ Diploma in Piling Operations (Construction) Pathway 1: Level 2 NVQ Diploma in Piling Operations (Piling Rig Operator) Pathway 2: Level 2 NVQ Diploma in Piling Operations

More information

Technical data Drilling rig LB 24

Technical data Drilling rig LB 24 Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device

More information

HDD-Compact Drilling Rig with on board pump

HDD-Compact Drilling Rig with on board pump Made in Germany HDD-Compact Drilling Rig with on board pump HDD-Compact Drilling Rig with on board X-pump, 300 kn - 800 kn pull force (30 t - 80 t) 18 knm - 45 knm torque PRIME DRILLING operates worldwide

More information

SAVANNAH GEORGIA USA

SAVANNAH GEORGIA USA EK250 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with

More information

A PIONEER IN PILE DRIVING

A PIONEER IN PILE DRIVING A PIONEER IN PILE DRIVING Junttan has 40 years experience in developing and manufacturing the industry s leading piling equipment. During this time, we have established a solid position as the recognised

More information

Technical data Drilling rig LB 28

Technical data Drilling rig LB 28 Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary

More information

There s no better choice

There s no better choice There s no better choice Well known as the original source of the In-Line Drive Design, Premier Auger has built the most reliable earth auger attachments for over 3 decades. With a complete and comprehensive

More information

DYNATECH INDUSTRIES PVT LTD

DYNATECH INDUSTRIES PVT LTD DYNATECH INDUSTRIES PVT LTD MCD SERIES Mobile core Drill MODEL MCD40 TECHNICAL SPECIFICATIONS Product Introduction DynatechIndustries MobileCoreDrill- MCD40 is a Underground versatile Tyre Version heavy

More information

New HAZET Range of Pullers / Extractors

New HAZET Range of Pullers / Extractors 17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For

More information

Technical data Piling and drilling rig LRB 255

Technical data Piling and drilling rig LRB 255 Technical data Piling and drilling rig LRB 255 Concept and characteristics Leader top for auxiliary rope Rope crowd system Tool with quick connection Auxiliary winch Leader Lateral inclination device Leader

More information

Technical data Drilling rig LB 20

Technical data Drilling rig LB 20 Technical data Drilling rig LB 20 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device

More information

AF 125 HYDRAULIC DRILL RIG

AF 125 HYDRAULIC DRILL RIG AF 125 HYDRAULIC DRILL RIG AF 125 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 125 is a very reliable machine that has been created for customers who want a smallsized machine with low dimensions

More information

Piling and drilling rig LRB

Piling and drilling rig LRB Piling and drilling rig LRB 355 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 t Vertical travel device Leader. m Inclination device Attachment with quick connection

More information

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved. LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility

More information

Dando Drilling International

Dando Drilling International Dando Drilling International Dando Terrier and Tooling The Dando Terrier drilling rig has been designed specifically for sampling and testing for geotechnical and environmental analysis. The rig is crawler

More information

AF 125 HYDRAULIC DRILL RIG. Courtesy of Crane.Market

AF 125 HYDRAULIC DRILL RIG. Courtesy of Crane.Market AF 125 HYDRAULIC DRILL RIG AF 125 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 125 is a very reliable machine that has been created for customers who want a smallsized machine with low dimensions

More information

Piling and drilling rig LRB 355 LRB

Piling and drilling rig LRB 355 LRB Piling and drilling rig LRB 355 EN LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 kn Vertical travel device Leader. m Inclination device Attachment with quick connection

More information

Technical data Hydraulic crawler crane HS 885 HD

Technical data Hydraulic crawler crane HS 885 HD Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight

More information

Technical data Drilling rig LB 24

Technical data Drilling rig LB 24 Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device

More information

77 Ton Tele-Boom Crawler Crane. mantiscranes.com

77 Ton Tele-Boom Crawler Crane. mantiscranes.com 15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

Rotary Drilling Rig TR300DH

Rotary Drilling Rig TR300DH Rotary Drilling Rig TR300DH TR300DH -Rotary Drilling Rig Electric system Wireless transmission system and GPS remote service Construction monitoring system The stability of drilling rig monitoring system

More information

Technical data Hydraulic crawler crane HS 875 HD

Technical data Hydraulic crawler crane HS 875 HD Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight

More information

XY-44A CORE DRILLING RIG

XY-44A CORE DRILLING RIG XY-44A CORE DRILLING RIG Ⅰ. General XY-44A Core Drill, a new type of product with enhanced capacity, is a kind of hydraulic-driven, spindle, diamond-bit, and small-diameter core drill with fairly powerful

More information

Expertise in Special Deep Foundation

Expertise in Special Deep Foundation Expertise in Special Deep Foundation 1 2 BVV The Specialist Company Profile BVV Spezialtiefbautechnik Vertriebs GmbH is a German engineering and sales company for special deep foundation machinery and

More information

SAVANNAH GEORGIA USA

SAVANNAH GEORGIA USA EK240 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with

More information

ED5800H SPECIFICATION

ED5800H SPECIFICATION SPEC.F5-3713E ED5800H Hydraulic Earth Drilling Rig SPECIFICATION March, 2011 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development and improvement,

More information

MC Line. BAUER MC 96 Duty-Cycle Crane

MC Line. BAUER MC 96 Duty-Cycle Crane MC Line BAUER MC 96 Duty-Cycle Crane Technical Data Dimensions of Base Machine 2040 1450 1150 4700 1000 410 2990 3050 4310 6040 7280 1020 5310 R 4700 Operating Weight with HD undercarriage, 1,000-mm-track

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 2-23 EN LB 22.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment

More information

Technical data Drilling rig LB 16

Technical data Drilling rig LB 16 Technical data Drilling rig LB 16 Concept and characteristics Leader top for auxiliary rope Leader top for Kelly rope Kelly Kelly rope Tensioning cylinder for crowd system Rotary Inclination device Casing

More information

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to

More information

Universal cylinders. single acting with spring return 5 to 100 tonnes. Features. Applications

Universal cylinders. single acting with spring return 5 to 100 tonnes. Features. Applications Universal cylinders YS Universal cylinders single acting with spring return 5 to 100 tonnes Universal cylinders are designed and manufactured to work in the toughest environments to which this type of

More information

Drilling Rig LB LB Courtesy of Crane.Market

Drilling Rig LB LB Courtesy of Crane.Market Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

Horizontal Directional Drilling Rigs t

Horizontal Directional Drilling Rigs t Made in Germany Horizontal Directional Drilling Rigs 150-600 t HDD-Rigs 1,500 kn - 6,000 kn pull force (150 t - 600 t) 70 knm - 180 knm torque Horizontal Directional Drilling Rig, Frame Version the low

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

BUILT ON TRUST CASING OSCILLATOR

BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST CASING OSCILLATOR BUILT ON TRUST SHAFT DRILLING FOR LARGE BORED PILING STRONG OSCILLATING TORQUE AND LIFTING FORCE BORE PILING FOR BIG STRUCTURE BUILDING 2 BUMA CE CO.,LTD. Company BUMA

More information

ValueLine. BAUER BG 26 Rotary Drilling Rig Base Carrier BT 70

ValueLine. BAUER BG 26 Rotary Drilling Rig Base Carrier BT 70 BAUER Rotary Drilling Rig Base Carrier BT 7 The BAUER BG The BG Perfection is achieved when there is nothing left to take away. Drilling uncased deep boreholes stabilized by drilling fluid, or drilling

More information

Technical data Drilling rig LB 24

Technical data Drilling rig LB 24 Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly bar Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Inclination device

More information

Construction Machine HS enus HS

Construction Machine HS enus HS Construction Machine HS 8200 enus HS 8007.01 Concept and characteristics Basic machine HS 8200 with dragline equipment Main boom 2220.24 Pendant straps Hoist rope guide Hoist winch I Cabin Undercarriage

More information

AF 240 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE

AF 240 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE AF 240 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 240 is a drill rig that can easily overcome any kind of problem on the job site, even the most difficult ones. This rig has been created

More information

Sheave head. Auxiliary winch. Leader

Sheave head. Auxiliary winch. Leader Sheave head Rope crowd system (RDS) Auxiliary winch Tool with quick connection Lateral inclination device Leader Leader support arm Longitudinal inclination device Vertical travel device Support arm brace

More information

XY-42A CORE DRILLING RIG

XY-42A CORE DRILLING RIG XY-42A CORE DRILLING RIG Ⅰ. Applications XY-42A is a kind of core drill driven with Tungaloy-carbide-tipped bit and diamond-bit, small-diameter. It is mainly suitable for exploration of metal or non-metal

More information

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:

D-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone: Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force

More information

ATTACHMENTS FOR LOADER CRANES

ATTACHMENTS FOR LOADER CRANES ATTACHMENTS FOR LOADER CRANES 2012 Rotators page KM 03 S Rotator with shaft 11 KM 04 S Rotator with shaft 11 KM 04 F Rotator with flange 11 KM 06 F Rotator with flange 12 Brick Stack Grapples KM 332V-1100

More information

Technical data Hydraulic crawler crane HS 895 HD

Technical data Hydraulic crawler crane HS 895 HD Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating

More information

TOTAL ATTACHMENTS. A Total Supply Chain Management Company

TOTAL ATTACHMENTS. A Total Supply Chain Management Company TOTAL ATTACHMENTS A Total Supply Chain Management Company TOTAL ATTACHMENTS KTR ATTACHMENTS! KTR Attachments have been developed to meet customer s diverse demand. With high-end manufacturing technology

More information

Piling and drilling rig LRB 355. enus LRB

Piling and drilling rig LRB 355. enus LRB Piling and drilling rig LRB 355 enus LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 18, lbf Vertical travel device Leader 7.8 ft Inclination device Attachment with

More information

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD

Ground bearing pressure 1.1 kg/cm 2 2 HS 855 HD The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting

More information

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel

More information

The accessory programme of the king s class.

The accessory programme of the king s class. The accessory programme of the king s class. www.menzimuck.com The buckets from own production Design We have gone for the original Hardox bucket - a quality tool in a tough design. The buckets certified

More information

Technical data Piling and drilling rig LRB 125

Technical data Piling and drilling rig LRB 125 Piling and drilling rig LRB 125 Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics

More information

Rotary Drilling Rig TR250D

Rotary Drilling Rig TR250D Rotary Drilling Rig TR250D TR250D-Rotary Drilling Rig Electric system Wireless transmission system and GPS remote service Construction monitoring system The stability of drilling rig monitoring system

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 4-7 EN LB 3.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment

More information

Technical data Hydraulic crawler crane HS 845 HD

Technical data Hydraulic crawler crane HS 845 HD Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating

More information

Pile Driving Equipment

Pile Driving Equipment Pile Driving Equipment www.oms.com.de Powerful, Reliable and Long Life!.. 02 CLAMPING DEVICES 29 CONTENTS Safe connection with piston - clamping system... OMS hydraulic clamps provide a safe connection

More information

SOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC

SOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC Microdrilling Microdrilling EQUIPMENT / TECHNOLOGIES PSM-8 PSM-8B PSM-8G STM-8G SM-14 PSM-16G STM-16G MICROPILES ANCHORINGS JET GROUTING OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT

More information

BUILT ON TRUST REVERSE CIRCULATION DRILLING RIG

BUILT ON TRUST REVERSE CIRCULATION DRILLING RIG BUILT ON TRUST REVERSE CIRCULATION DRILLING RIG BUILT ON TRUST BORE PILING FOR BRIDGE & TERMINAL (COAL, OIL & GAS) BORE PILING FOR JETTY & HARBOUR & DRY DOCKS BORE PILING FOR BIG STRUCTURE BUILDING BORE

More information

Technical data Drilling rig LB 28

Technical data Drilling rig LB 28 Technical data Drilling rig LB 28 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Kelly bar Inclination device Rotary

More information

Attachments for mini and compact excavators

Attachments for mini and compact excavators Attachments for mini and compact excavators 1-12 t english Attachments for excavators from 1 to 12 t Superior quality and reliability: attachments from Lehnhoff was developed for the toughest applications.

More information

Technical data Hydraulic crawler crane HS 835 HD

Technical data Hydraulic crawler crane HS 835 HD Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating

More information

AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers

AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety

More information

AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers

AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers AUGERS For Skid-Steer Loaders, Compact Tractors, Mini Compact Loaders, Excavators, Mini Excavators, Tractor Loader Backhoes and Telehandlers The McMillen Auger Drives by Paladin, feature a wide variety

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY

TELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive

More information

Technical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine)

Technical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine) 1 5646-0314-S5 Technical Data Specifications & Capacities Telescopic Crawler Crane Ton (51mt Export Machine) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane

More information

YZ Series Pile Drivers

YZ Series Pile Drivers YZ Series Drivers 1. Functions 1.1 Driving Function: YZ Series is Driver designed to install and maintain highway anti-collision guard rails and solar posts, and is especially applicable for driving guardrail

More information

TRACKED EXCAVATOR JS145HD

TRACKED EXCAVATOR JS145HD MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track

More information

CONTENT Vertical Drills MDT 80 V. MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0)

CONTENT Vertical Drills MDT 80 V. MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0) MDT Sales Ltd. Herne House Herne Park East Road Oundle PE8 4BZ T. +44 (0) 1832273977 Robin@mdtsales.uk To the kind attention of: Mr. Robin North Date: 06 05 2015 SUBJECT: OFFER 2015-1470024 quote MDT Sales

More information

Drilling & Piling Attachments. of Sweden

Drilling & Piling Attachments. of Sweden Drilling & Piling Attachments of Sweden General Catalogue 2012 Made in Sweden Blast Hole Drilling MD33 MD45 DM60 Foundation Drilling SPD AB It s with pride and joy I present our company SPD AB. DM85 DM-X

More information

Grabs and Rotators. Attachments for truck mounted crane.

Grabs and Rotators. Attachments for truck mounted crane. Grabs and Rotators Attachments for truck mounted crane www.hyva.com Crane Attachments by Brick Stack Grapple H 332 Pallet Fork H 415 Orange Peel Grapple H 650 Clamshell Bucket H 604HPX Small Volume Clamshell

More information

JS Excavator Attachments Guide ATTACHMENTS

JS Excavator Attachments Guide ATTACHMENTS JS Excavator Attachments Guide ATTACHMENTS Introduction Contents Our Range The following guide details our full range of excavator attachments. For further information on this range or any of our other

More information

TE 210. te210 TUNNEL EXCAVATOR. Technical Main Data. For heading in soft to medium hard ground Tunnel excavation boom with swivel dipper stick

TE 210. te210 TUNNEL EXCAVATOR. Technical Main Data. For heading in soft to medium hard ground Tunnel excavation boom with swivel dipper stick te210 TUNNEL EXCAVATOR Equipment: Standard dipper stick 3780 mm Ripper bucket with quick hitch CW40 Technical Main Data Maximal vertical reach mm 8.500 Maximal boom reach mm 3.900 Minimal operating height

More information

NSRBA 2017 EQUIPMENT DESCRIPTION. Purchase Price 2017 Monthly Rental % Monthly Rate Hourly Rate Daily Rate

NSRBA 2017 EQUIPMENT DESCRIPTION. Purchase Price 2017 Monthly Rental % Monthly Rate Hourly Rate Daily Rate AIR EQUIPMENT & TOOLS: Compressors: Gas or Diesel, cfm @ 100 psi Gas or Diesel, cfm @ 100 psi 85-150 cfm $27,272.70 7% $1,909.09 $13.00 $130.00 151-175 cfm $34,848.45 7% $2,439.39 $13.50 $135.00 176-250

More information

Christensen CT20. Surface core drill rig for mineral exploration

Christensen CT20. Surface core drill rig for mineral exploration Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,

More information