Single Turn Rotary Wirewound Potentiometers
|
|
|
- Shanna Anthony
- 5 years ago
- Views:
Transcription
1 Single Turn Rotary Wirewound Potentiometers THE POTENTIOMETER SPEILISTS QD & QDD Series 1.328" Diameter, 3 watts, Single or Dual Module... pg. 2 Suggested replacement for Honeywell R20 and 43-Series QE & QEE Series 1 9/16" Diameter, 4 watts, Single or Dual Module... pg. 5 Suggested replacement for Honeywell R30 and 58-Series For more information about these products, visit our website at Page 1 THE POTENTIOMETER SPEILISTS
2 QD & QDD Series Single Turn Rotary Wirewound Potentiometers 1.328" Diameter 3 40 power rating Single or Dual Potentiometer 3/8" Diameter ushing 1/4" or 1/8" Diameter Shaft Options: oncentric Shaft for Dual Potentiometer Rotary Power For more information about the QD & QDD Series Wirewound Potentiometers, Electrical and Mechanical Specifications Power Rating: 3 40 (ontrol mounted on steel panel 4"x4"x.060") Range: Linear:.5 ohm thru 100 K ohms udio: 5 ohms thru 20 K ohms Tolerance: ±10% Standard, ±5% Special Order Taper: Linear, udio, Special Voltage Ratings: 900 V terminals to mounting plate (High Pot Test for 1 minute). Insulation : 1000 megohms minimum (50% relative humidity at 25 ) Operating Temperature: -55 to Operating Life: 10,000 cycles Mechanical Rotation: 297 ± 5 ody materials ody metal parts are nickel plated. ody front is molded without openings. Shaft: 1/4" or 1/8" Diameter Shaft Styles: Slotted, Flatted, Knurled - see Shaft Section ushing: Thread: 3/8-32 MEF-2 Length: 3/8" or 1/4" FMS oncentric Shaft Option: Outer Shaft:.265" Diameter Inner Shaft:.187" Diameter Terminals: Solder Lug Locating Lug: Single Optional : Rotary SPST, SPDT, or DPST Optional: Shaft or Panel Seal Page 2 THE POTENTIOMETER SPEILISTS
3 QD & QDD Series Wirewound Potentiometers Outline and Mounting Dimensions (mm/inch) 1/4" Diameter Shaft, 3/8" Diameter ushing.082 Hole / Dimensions: = Shaft Length ±.031 = ushing Length:.375 or =.280 (Rotary ) 12 stones 3/ ircuit Diagram 2 WIPER W W 1 3 LOKWISE Page 3 THE POTENTIOMETER SPEILISTS
4 QD & QDD Series Wirewound Potentiometers vailable Shaft Styles 3/64 35/64 33/ Style 1 Screwdriver Slot - Diameter Style 2 Screwdriver Slot Diameter / Teeth Style 3 E.I.. Knurl - Diameter.156 or.218 Style 4 Flatted - Diameter.082 ±.002 Style 5 Flatted Diameter LOrdering Information Example Part Number: QD J-1-OPP1 QD J 1 O-1 Model QD=Single Module QDD=Dual Module oth models: 3/8" ushing 1/4" Shaft ushing Length: 1 =.375" 2 = " Shaft Type: 1 = Slotted 2 = Knurled 3 = Flatted Shaft Length: 032 = 1/2" 040 = 5/8" 056 = 7/8" 100 = 1" 200 = 2" codes for multiple sections are formatted as follows: If resistance and taper is the same for all sections: ode followed by the letter "X" then the number of sections. Example: QD X3-J-1-O-1 3 sections, all 10K linear : 10 = 1 ohm 50 = 5 ohms 200 = 20 ohms 250 = 25 ohms 101 = 100 ohms 102 = 1K ohms 252 = 2.5K ohms 502 = 5K ohms 253 = 25K ohms Tolerance: J = ±10% X = ±5% Option lank Taper: 1 = Linear X = Special ction No Type Rating O-1 Rotary SPST 6 125V 3 125VD O-2 Rotary SPDT 6 125V 2 125VD O-3 Rotary DPST 3 125V ontact Sales for correct format for other combinations Part number shown above is for specifying purposes only. unique part number will be assigned once the design has been finalized and approved by customer. For more information about this product, Page 4 THE POTENTIOMETER SPEILISTS
5 QE & QEE Series Single Turn Rotary Wirewound Potentiometers 1 9/16" Diameter 4 40 power rating 3/8" Diameter ushing; 1/4" or 1/8" Diameter Shaft Single or Dual Potentiometer Optional: oncentric Shaft for Dual Potentiometer Rotary Power For more information about QE & QEE Series Wirewound Potentiometers, Electrical and Mechanical Specifications Power Rating: 4 watts@ 40 (ontrol mounted on steel panel 4"x4"x.060") Range:.5 ohm thru 100 K ohms, linear 5 ohms thru 20 K ohms, audio Tolerance: ±10% Standard, ±5% special Taper: Linear, udio, Special Voltage Ratings: 900 V terminals to mounting plate (High Pot Test for 1 minute). Insulation : 1000 megohms minimum (50% relative humidity at 25 ) Operating Temperature: -55 to Operating Life: 10,000 cycles Mechanical Rotation: 300 ± 5 ody materials: ody metal parts are nickel plated. ody front is molded without openings. Shaft Styles: Slotted, Flatted, Knurled - see Shaft Section oncentric Shaft Option for QEE Series: Outer Shaft:.265" Diameter Inner Shaft:.187" Diameter ushing: Thread: 3/8-32 MEF-2 Length: 3/8" or 1/4" FMS Terminals: Solder Lug Locating Lug: Single Optional : Rotary SPST, SPDT, or DPST Optional Features: Shaft or panel seal High torque construction Multi-gang tandem construction Page 5 THE POTENTIOMETER SPEILISTS
6 QE Series Wirewound Potentiometers Outline and Mounting Dimensions (mm/inch) 1/4" Diameter Shaft, 3/8" Diameter ushing 1 3/8 approx. Optional Rotary or Push-Pull 1 7/32 3/8-32 THD 1/8 1 9/16 15/ Locating Lug 3/32 enter Tap (Optional) 17/32 Dimensions: = Shaft Length ±.031 = ushing Length 9/16 9/ ircuit Diagram 2 WIPER 1 9/16 15/ W W 1 3 LOKWISE 3/32 9/16 9/16 9/ Page 6 THE POTENTIOMETER SPEILISTS
7 QE Series Wirewound Potentiometers vailable Shaft Styles 3/64 35/64 33/ Style 1 Screwdriver Slot - Diameter Style 2 Screwdriver Slot Diameter / Teeth Style 3 E.I.. Knurl - Diameter.156 or.218 Style 4 Flatted - Diameter.082 ±.002 Style 5 Flatted Diameter LOrdering Information Example Part Number: QE J-1-OPP1 QE J 1 O-1 Model QE = Single QQE = Dual ushing Length: 1 =.375" 2 = " Shaft Type: 1 = Slotted 2 = Knurled 3 = Flatted Shaft Length: 032 = 1/2" 040 = 5/8" 056 = 7/8" 100 = 1" 200 = 2" codes for multiple sections are formatted as follows: If resistance and taper is the same for all sections: ode followed by the letter "X" then the number of sections. Example: QE X3-J-1-O-1 3 sections, all 10K linear : 10 = 1 ohm 50 = 5 ohms 200 = 20 ohms 250 = 25 ohms 101 = 100 ohms 102 = 1K ohms 252 = 2.5K ohms 502 = 5K ohms 253 = 25K ohms Tolerance: J = ±10% X = ±5% Taper: 1 = Linear X = Special Option lank ction No Type Rating O-1 Rotary SPST 6 125V 3 125VD O-2 Rotary SPDT 6 125V 2 125VD O-3 Rotary DPST 3 125V ontact Sales for correct format for other combinations Part number shown above is for specifying purposes only. unique part number will be assigned once the design has been finalized and approved by customer. For more information about Wirewound ontrols, Page 7 THE POTENTIOMETER SPEILISTS
Series S127B Potentiometer 1/2" (12.7mm) Square
Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17
Series 388/389 Custom Potentiometer Designer Guide
Series 88/89 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet POT PROTOTYPES
30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
Series 70 Custom Potentiometer Designer Guide
Series 70 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet http://www.potentiometers.com
Series 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
Rotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical
24mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS PANEL CONTROLS 24mm Diameter, Single-Turn, Carbon Industrial Panel Controls RV24YN RV24YGME RVT24YN Features 24mm diameter, single-turn industrial panel controls Carbon film element Linear or audio
Features Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
*RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions
Series 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
Series 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
mm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
ELUMILED.COM. Model 91, 92, 93, 94 & 95-5/8 Square Single-Turn Panel Control
*ohs COMPLIANT VESIONS AVAILABLE Features Available in a variety of pin-out configurations Virtually infinite electrical circuit isolation Metal or plastic shaft options ohs compliant versions available*
n Available in a variety of pin-out configurations
*ohs COMPLIANT Features n Available in a variety of pin-out configurations n Virtually infinite electrical circuit isolation n Metal or plastic shaft options n ohs compliant* Model 91, 9, 93, 94 & 95-5/8
Data Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
OW20BU/B4PC1S OW20BU/N4PC1S-CH *
OW20BU/B4PC1S OW20BU/N4PC1S-CH * B4OW1S N4PC1S 4 Amp Single Pole Switch CH Change Over (Double Throw) OW Ordinary Wiring (recommended for soldering) PC For Printed Circuit * Representative of range: Switch
9mm Size Metal Shaft Multi-ganged Type / Other Specifications
9mm Size Multi-ganged / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Total esistance Variety (kω) 0 0 esistance Taper esistance taper 1 1 3 1C
XA16ECO/B1PC1S XA16ECO/B4PC1S
XA16ECO/B1PC1S XA16ECO/B4PC1S B4PC1S B1PC1S - 14 1 Amp Single Pole (Single Throw) Switch XA Terminals Bent Extra Long Toward Switch PC Printed Circuit Terminals This image shows the XA terminals located
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
Custom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
Provides a superior operational feel with high-speed tracking in motor drive mode.
for Fader Control of s Motor-driven Master Type Motor N Fader, Motor K Fader RS N M/RS0K V Series Provides a superior operational feel with high-speed tracking in motor drive mode. Typical Specifications
TOCOS PANEL CONTROLS INDUSTRIAL APPLICATIONS
PANEL CONTROLS INDUSTRIAL APPLICATIONS Carbon Film Wirewound Cermet Long Life Carbon Film Attenuators SELECTION GUIDE www.tocos.com Carbon Panel Controls RV102 Series RV103 Series RV12 Series Resistance
DIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
Ride On Locomotive. Installation Guide
Ride On Locomotive Installation Guide Phoenix Sound Systems, Inc. 3514 West Liberty Road Ann Arbor MI 48103 www.phoenixsound.com phone: 800-651-2444 fax: 734-662-0809 e-mail: phoenixsound@phoenixsound.com
Custom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
Precision Potentiometers
Precision Potentiometers w w w. b o u r n s. c o m I. Product Selection Guide...58 II. Potentiometers Multiturn...60 Single-Turn...65 Knobpot...70 Pushbutton (Digital Readout)...7 III. Definitions & Test
spectrasymbol.com Rev F3 - Page 1
Features - Linear Position Sensor - IP65 Dust Proof, Water Proof (Intense Spray) - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) - Upon Request - Male or Female Nicomatic or Berg - Wiper of
MX4X-6XXX Series MX4X-7XXX Series. Selection Guide. Applications. DuraDrive Series Actuators and Accessories
MX4X-6XXX Series MX4X-7XXX Series Selection Guide DuraDrive Series Actuators and Accessories Applications DuraDrive Direct Coupled Actuators are designed to accept two-position, floating, or proportional
General Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
POSITION TRANSMITTERS
POSITION TRANSMITTERS GENERAL DESCRIPTION Jordan Control s Series of position transmitters are rugged, compact industrial components that couple a precision feedback component and/or limit switches to
AC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
SP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
Series 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
Rack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
mm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
Motorized Potentiometers and Rheostats
Motorized Potentiometers and Rheostats Motorized Potentiometers Motorized Rheostats Document 1101069 - Edition June 2009 Table of Contents 1 General Description...3 2 Series and Models...4 3 Examples of
F-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
PC4G20BU. PC Printed Circuit Terminals
PC4G20BU PC Printed Circuit Terminals W Y X L A S E Mounting Height Mounting Diameter Spindle Diameter Spindle Length Initial Termination Wiper (or moving contact) termination End Termination Prefix (Potentiometer
MF-22xx3. Application. Features. Floating Valve Actuator General Instructions
MF-22xx3 Floating Valve Actuator Application The Floating Valve Actuator is a non-spring return actuator used with floating DDC controllers and standard /2" to -/4" two-way and three-way valve bodies for
Position Transmitters. Instruction Manual. Established Leaders in Valve Actuation. Electric Actuators and Control Systems
Electric Actuators and Control Systems Established Leaders in Valve Actuation Position Transmitters Instruction Manual Publication P973E Issue 08/09 Instruction Manual IM-0665 Position Transmitters Where
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
SP1 SP1-4 SP1-12 SP1-25 SP1-50 SP1-4-3 SP SP SP Compact String Pot Voltage Divider Output
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
Contents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
SP1 SP1-4 SP1-12 SP1-25 SP1-50 SP1-4-3 SP SP SP Compact String Pot Voltage Divider Output
SP1 Compact String Pot Voltage Divider Output Linear Position to 50 inches (1270 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick
Kulka Military Class (A-A-59125) / (MIL-T-55164*)
(--59125) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T-59125 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
12-position General-purpose Vertical Type Rotary Switch
-position General-purpose Vertical Type Switch SRRM Series General-purpose type switch with a shaft, applicable in a wide range of general electronic devices. ar Use Multi ontrol Features General-purpose
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
SG1 SG1-120 SG SG Voltage Divider Output Signal
SG1 Voltage Divider Output Signal Compact Mid-Range String Pot Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure IP67 In Stock for Quick Delivery 4.7 [119 mm] 6.0 [153 mm] The
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
Section 26: Capacitors, Resistors, Potentiometers, Trimmers. Capacitors Resistors Potentiometers Trimmers...
Section 26: Capacitors, Resistors, Potentiometers, Trimmers Sub-Section Page Capacitors.....................................................680 Resistors......................................................681
9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...
Switching & ontrols Selection Guide... 1028 1V Series... 1029 Dimensions... 1035 www.ide.com/circuitbreaker ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
Rotary Position Sensors
RE.pdf Rotary Position Sensors SMD/Lead Dust-proof Type 12mm Size SV01 Series Features 1. Dust-proof construction protects the interior from dust, which maintains stable characteristics. 2. Compliant to
DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)
. Toggle Switches General Purpose Toggles Rated Product Selection Rated Toggle SwitchesSingle-Pole Rating 6, 5 Vac, 50 Vac 0, 50 Vac / hp, 50 Vac 5, 5 Vac 0, 50 Vac / hp, 50 Vac / hp, 5V Vac 5, 5 Vac 0,
9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
Fuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
General Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
General Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
Circuit Basics and Components
Circuit Basics Electric circuits are arrangements of conductors and components that permit electrical current to flow. A circuit can be as simple as a battery and lamp or as sophisticated as a computer.
DPDT BTA12-2C-S-C BTA12-2C-S-CL BTA12-2C-S-CLM SPST-NO-DM BTA12-1X-S-C BTA12-1X-S-CL BTA12-1X-S-CLM
FEATURES Plug-in relay Quick connect receptacles or direct soldering. PCB terminals are also acceptable. Large capacity 30A contact rating. Optional blowout magnet: high dc switching. Wide spacing between
MCX SERIES. Description. Applications. Microminiature Coaxial Connectors
MCX SERIES Microminiature Coaxial Connectors Description Jy Chyun MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
Relay Contact Ratings. Operating Temperatures. Life Expectancy. Humidity Tolerance Enclosure Mounting Weight
Multi-Function Moisture Sensing Liquid Level Control INGRAM P R O D U C T S, I N C. Part No. : MSRP4A, MSRP0A The Ingram Multi-function Moisture Sensing Relay (MSR) saves you time and money. No more time
GM Standard - GM 90.25
GM Standard - GM 90.25 utomotive Standards - GM 90.25 GM 90.25.00-XX-XX Page /4 GM 90.25.01-XX Page /5 GM 90.25.02-XX Page /6 GM 90.25.03-XX Page /7 GM 90.25.04-XX Page /8 GM 90.25.05-XX-XX Page /9 GM
Instruction Manual for Barber-Colman Series EA Electric High Torque Actuators
Instruction Manual for Barber-Colman Series EA Electric High Torque Actuators 1321-IN-004-0-11 For use with VB-7000 and VB-9000 Valve Bodies from Barber-Colman, and other commercially available rotary
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
General Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES
FEATURES Dry circuit through power ratings. ompact size SPST momentary and alternate action models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPEIFIATIONS
T he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
ASSEMBLY INSTRUCTIONS FOR NEW FK109 4 LED Railroad Crossing Flasher Kit WITH ADJUSTABLE FLASHING SPEED CONTROL with 4 Red 3mm Leds
ASSEMBLY INSTRUCTIONS FOR NEW FK109 4 LED Railroad Crossing Flasher Kit WITH ADJUSTABLE FLASHING SPEED CONTROL with 4 Red 3mm Leds Description: Very easy to build, The FK109 Led Flasher kit makes the perfect
Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories
Switching & ontrols Selection Guide... 922 1V Series... 923 Dimensions... 929 Accessories... 932 ircuit Breakers Switches & Pilot Lights Signaling Lights Relays & Sockets Timers ontactors Terminal Blocks
Hesitation Switch. Pushbutton Actuator. Product Description
- E Series, Technical Information July 01 Contents Description Page Product Description......... - Stards Certifications............. - Technical Data Toggle es......... - Hesitation es...... -..... -
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
ELECTRICAL POWER-STATIC INVERTER - BRIDGE ASSEMBLY R170 RELOCATION
ELECTRICAL POWER-STATIC INVERTER - BRIDGE ASSEMBLY R170 RELOCATION I PLANNING INFORMATION A. Effectivity- Static Inverter Part Number 1-002-0102-0265, (Boeing P/N S282T004-5), Model 1C1000-1A, Mod Levels
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
Damper Actuator Installation
FANs 268.1, 977, 1628.3 Installation Bulletin EPP-1000 Issue Date 0800 EPP-1000 Series Electro-Pneumatic Positioners A pplication The EPP-1000 is designed for applications where electronic control of pneumatic
or 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
Dip and coded rotary switches
Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT
PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Reed Switches and Proximity Sensors 1 REED SWITCHES HIGH POWER 7 UNIVERSAL HIGH POWER & HIGH VOLTAGE 7 Form A Form C Form C Form A Form C 196W 134W 156W 634W 637W 907W 834W 933W
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
CAUTION! This manual contains important information for the correct installation, operation and maintenance of the equipment described herein.
CAUTION! This manual contains important information for the correct installation, operation and maintenance of the equipment described herein. All persons involved in such installation, operation, and
Low Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
ICA Manufacturing Catalog. Your One Stop Metal Shop. Table of Contents. Visit us at:
ICA Manufacturing Your One Stop Metal Shop At ICA Manufacturing, you will find high-quality creations and wholesale parts at a budget price. From Aluminum Cabinetry, to Transformers, to Capacitors, we
Booster Pump Control Valve
MODEL 60-7 660-7 ooster Pump Control Valve Simple Hydraulic Operation Low Head Loss Horizontal or Vertical Mounting uilt-in Check Valve Proven Reliable Design The Cla-Val Model 60-7/660-7 ooster Pump Control
Tri Boost Kit Instructions
Tri Boost Kit Instructions Click here for older triboost version instructions(no 3-way LED) Parts Checklist...page 2-3 Schematic.....page 4 Populating and mounting the circuit board..page 5-14 Wiring Diagram.......page
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Toggle Switches, A Series, Part Number Matrix
Toggle Switches, A Series, Part Number Matrix "A" SERIES DESIGN FEATURES Toggle Machined brass, heavy nickel plated. Bushing & Frame Rigid one-piece die cast, copper flashed, heavy nickel plated. Fixed
(DQS) Rib-Wound Adjustable Resistors. Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 (DQS) Rib-Wound Adjustable Resistors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
ches UL File No. E101598
Instrument Transformers, Inc. Series Series 95 95 Swit Switches ches UL File No. E101598 INSTRUMENT AND CONTRC ONTROL OL s Instrument and Control Switch is a heavy-duty rotary switch that satisfies the
RS14 Rotary Sensor. 56
Rotary Sensor 5 www.acptechnologies.com mm Rotary Sensor with 150.000 cycles of mechanical life on its standard confi guration, making it particularly appropriate for control applications. has plastic
4000 series Industrial resistive joysticks
The 4000 Series is a range of robust, industrial quality potentiometer joysticks for internal and external applications. All 4000 Series share the same, all metal mechanism to provide the finest performance
Quartz Explosionproof valve monitoring
Quartz Explosionproof valve monitoring The Quartz is available in explosionproof (QX), nonincendive, intrinsically safe (QN), and general purpose (QG) versions. The robust epoxy-coated anodized aluminum
Power rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,