n Available in a variety of pin-out configurations
|
|
|
- Blake Hicks
- 6 years ago
- Views:
Transcription
1 *ohs COMPLIANT Features n Available in a variety of pin-out configurations n Virtually infinite electrical circuit isolation n Metal or plastic shaft options n ohs compliant* Model 91, 9, 93, 94 & 95-5/8 Square Single-Turn Panel Control Initial Electrical Characteristics 1 Conductive Plastic Element Cermet Element Standard esistance ange Linear Tapers (A, B, E, & H)...(B & E) 1 K ohms to 1 megohm... (A & H) 100 ohms to 1 megohm Audio Tapers (C, D, F, G, S, & T)...(D,G,S, & T) 1 K ohms to 1 megohm... (C & F) 1 K ohms to 1 megohm Total esistance Tolerance...10 % or 0 %... 5% or 10% Independent Linearity...±5 %... ±5 % Absolute Minimum esistance... ohms maximum... ohms maximum Effective Electrical Angle...(Linear tapers) 40 ± 5... (Linear tapers) 40 ± 6 (Audio tapers) 5 ± 5... (Audio tapers) 5 ± 6 Contact esistance Variation...±1 %... ±1 % or 3 ohms (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-0, Method 301) Sea Level...1,500 VAC minimum... 1,500 VAC minimum 70,000 Feet VAC minimum VAC minimum Insulation esistance (500 VDC)...1,000 megohms minimum... 1,000 megohms minimum Power ating (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less) +70 C Single Section Assembly...(Linear tapers) 1 watt... (Linear tapers) watts (Audio tapers) 0.5 watt... (Audio tapers) 1 watt +70 C Multiple Section Assembly...(Linear tapers) 0.5 watt/section... (Linear tapers) 1 watt/section (Audio tapers) 0.5 watt/section... (Audio tapers) 0.5 watt/section +15 C...0 watt... 0 watt Theoretical esolution...essentially infinite... Essentially infinite Environmental Characteristics 1 Operating Temperature ange C to +15 C C to +15 C Storage Temperature ange C to +15 C C to +15 C Temperature Coefficient Over Storage Temperature ange... ±1,000 ppm/ C...±150 ppm/ C Vibration (Single Section) G...15 G Total esistance Shift... ± % maximum...± % maximum Voltage atio Shift... ±5 % maximum...±5 % maximum Shock (Single Section) G...30 G Total esistance Shift... ± % maximum...± % maximum Voltage atio Shift... ±5 % maximum...±5 % maximum Load Life... 1,000 hours...1,000 hours Total esistance Shift... ±10 % maximum...±5 % maximum otational Life (No Load) ,000 cycles...100,000 cycles Total esistance Shift... (Linear tapers) 10 ohms or ±15 % TS max...(all tapers) ±5 % TS max. (whichever is greater) (Audio tapers) ±0 % maximum Contact esistance 50,000 cycles... (Linear tapers) ± %...± % (Audio tapers) ±3 %...±3 % Moisture esistance (MIL-STD-0, Method 103, Condition B) Total esistance Shift... (Linear tapers) ±10 % TS maximum...(all tapers) ±5 % TS maximum (Audio tapers) ±0 % TS maximum Insulation esistance (500 VDC) megohms minimum megohms minimum IP ating... IP 40...IP 40 Moisture Sensitivity Level ESD Classification (HBM)... N/A...N/A *ohs Directive 00/95/EC Jan. 7, 003 including annex and ohs ecast 011/65/EU June 8, 011.
2 Mechanical Characteristics 1 Stop Strength (1/4 D shaft) N-cm (4 lb.-in.) (1/8 D shaft) N-cm (3 lb.-in.) Mechanical Angle ±5 Torque Starting max. above average running torque unning Torque Single or Dual Section (A & Bushings) to 1.06 N-cm (0.3 to 1.5 oz.-in.) Single or Dual Section (C & U Bushings) to 1.06 N-cm (0. to 1.5 oz.-in.) Mounting N-m (15-18 lb.-in.) maximum Variation N-cm (0.5 oz.-in.) maximum in 45 shaft travel Weight (Single Section, Metal Bushing) grams nominal (Each Additional Section)...4 grams nominal Terminals...Printed circuit terminals, J-Hooks or solder lugs Soldering Condition...ecommended hand soldering using Sn95/Ag5 no clean solder, 0.05 wire diameter. Maximum temperature 399 C (750 F) for 3 seconds. No wash process to be used with no clean flux. Marking...Manufacturer s trademark, date code, resistance, manufacturer s part number Ganging (Multiple Section Potentiometers)... cups maximum Hardware...One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. NOTE: Performance specifications do not apply to units subjected to printed circuit board cleaning procedures. 1 At room ambient: +5 C nominal and 50 % relative humidity nominal, except as noted.
3 Product Dimensions.86 ± 0.43 (.900 ±.017) MOUNTING SUFACE L ±.9 (.500 ±.009) 0.79 ± ± 0.38 (.540 ±.015) 1.37 ± 0.08 (.054 ±.003).36 ± 0.08 (.093 ±.003) 7.9 (.31) (.031) PLCS..54 (.010) GAP ± 0.30 (.400 ±.01) ± 0.0 (.435 ±.008) HOW TO ODE CHAT FO BUSHING OPTIONS. A STYLE A.. LUG 15.9 ± 0.56 (.60 ±.0) 9.53 (.375) 5.08 (.0) 1.5 (.06) NEXT PAGE FO SHAFT OPTIONS. (.03 ±.00).86 ± 0.43 (.900 ±.017) MOUNTING SUFACE L ±.9 (.500 ±.009) 0.79 ± ± 0.38 (.540 ±.015) 1.37 ± 0.08 (.054 ±.003).36 ± 0.08 (.093 ±.003) 7.9 (.31).81 (.03). MAX (.150) MAX. TYP ±.76 (.1 ±.03) 1.5 (.06) GAP (.03 ±.00) ± 0.30 (.400 ±.01) ± 0.38 (.00 ±.015) ± 0.0 (.435 ±.008) HOW TO ODE CHAT FO BUSHING OPTIONS. NEXT PAGE FO SHAFT OPTIONS. A STYLE A.. LUG 1.7 ± 1.0 (.500 ±.040) 9.53 (.375) (.03 ±.00) 10 ± 5 STD. FLAT OIENTATION (SHAFT AT CCW END) 1 3 CCW POTENTIOMETE 5.08 ± 1.0 (.00 ±.040) 4.45 ±.38 (.175 ±.015) (.40) 5.59 ±.0 (.0 ±.008) 4.45 ±.38 (.175 ±.015).03 (.080) 3 PLCS..41 (.016) 1.0 (.040) WIDE X.9 (.090) LONG 3 PLCS TOLEANCES EXCEPT AS SHOWN: DECIMAL.XXX ± (.015 ) FACTION ± 1/ XX ± ANGLE ±5 (.38)
4 Product Dimensions Plastic Shaft Styles SHAFT TYPE "B" (USES BUSHING A) SHAFT TYPE "D" (USES BUSHING C) SHAFT TYPE "T" (USES BUSHING U) /-.00 ( /-.000) /-.15 ( /-.006) 1.50 ±.5 (0.06 ±.001) /-.15 ( /.006) / (0.03) ( /-.00) SHAFT TYPE "C" (USES BUSHING A) SHAFT TYPE "" (USES BUSHING ) SHAFT TYPE "W" (USES BUSHING A) 5.49 (.16) ±.38 (.440 ±.015) /-.15 ( /.006) 1.80 ±.5 (0.07 ±.001) 1.00 (.04) / ( /-.00) 48 TOOTH 14.7 ±.5 (.56 ±.010) /-.051 ( /.00) 5.40 (1.00) Metal Shaft Styles SHAFT TYPE "A" (USES BUSHING A) SHAFT TYPE "H" (USES BUSHING A) /-.05 ( /.0010) F ±.38 ( F ±.015) /-.05 ( /.0010) SHAFT TYPE "S" (USES BUSHING ) F ±.381 ( F ±.015) /-.035 ( /.0014) SHAFT TYPE "E" (USES BUSHING C) 5.4 (1.000) ±.051 (.16 ±.00) FLAT LENGTH F : 7.95 (.313) (.438) ±.076 (.157 ±.003) FLAT LENGTH F : 6.99 (.75) 1.98 (.511) 0.79 ± 0.5 SHAFT TYPE "G" (USES BUSHING A) /-.00 ( /-.000) (.031) (.145) /-.05 ( /.0010) SHAFT TYPE "J" (USES BUSHING ) SHAFT TYPE "V" (USES BUSHING U) 1.80 ± /-.035 (.071 ±.010) ( /.0010) 1.50 ± /-.035 (.059 ±.010) ( /.0010) 1.00 ± 0.13 (.039 ±.054).0 TOLEANCES EXCEPT AS SHOWN:.XX = ± (.050).XXX = ±.005 (.17).XXXX = ±.0005 (.017) DIMENSIONS: MM (INCHES) 0.79 ± 0.13 (.031 ±.054)
5 How to Order Model 91, 9, 93, 94 & 95 Panel Controls 91 A A - A 8 - A 15 / A15 L Part number for multiple section potentiometers must have a taper and resistance value for each section. A C U # SECTIONS 1 Single Dual ANTI-OTATION LUG A Single.305 (7.8 mm), 90 CW D No Lug BUSHING Metal Plain 3/8 (9.53 mm) D x 3/8 (9.53 mm) L Metal Plain 1/4 (6.35 mm) D x 1/4 (6.35 mm) L Metal Plain 10 mm D x 9 mm L Metal Plain 7 mm D x 9 mm L MODEL 91 Single-Turn, In-Line PC Pins 9 Single-Turn, In-Line J-Hooks 93 Single-Turn, L-Pattern PC Pins 94 Single-Turn, L-Pattern J-Hooks 95 Single-Turn, Triangle-Pattern Solder Lugs SHAFT AVAILABLE LENGTH ONLY IN (FMS) BUSHING Code Description Code 16 1/ L A, C 0 5/8 L A, C 4 3/4 L A, C 8 7/8 L A 3 1 L A METIC mml, U mml, U SHAFT TYPE AVAILABLE ONLY IN LENGTHS BUSHINGS (CODE) (CODE) B Plastic Single Slotted 1/4 " (6.35 mm) D 16, 0, 4, 8 A C Plastic Single Flatted 1/4" (6.35 mm) D 4, 8 A D Plastic Single Plain 1/8" (3.18 mm) D 16, 0, 4 C Plastic Single Slotted 6 mm D Metric 16, T Plastic Single Slotted 4 mm D Metric 16, U W Plastic Single Knurled 1/4" (6.35 mm) D 3 A A Metal Single Plain 1/4" (6.35 mm) D 16, 0, 4 A E Metal Single Slotted 1/8" (3.18 mm) D 16, 0, 4 C G Metal Single Slotted 1/4" (6.35 mm) D 16, 0, 4, 8 A H Metal Single Flatted 1/4" (6.35 mm) D 4, 8 A J Metal Single Slotted 6 mm D Metric 16, S Metal Single Flatted 6 mm D Metric 16, V Metal Single Slotted 4 mm D Metric 16, U ohs IDENTIFIE L Compliant ELEMENT TAPE ESISTANCE CODE TYPE/TOLEANCE VALUE IN OHMS (A) Linear Cermet ±10 % (05) (30) - 15 K (H) Linear Cermet ±5 % (8) (16) - 0 K (06) - 00 (17) - 5 K (07) - 50 (18) - 50 K (08) (0) K (10) - 1 K (1) - 00 K (11) - K () - 50 K (1) -.5 K (3) K (13) - 5 K (5) - 1 M (15) - 10 K (B) Linear C-P ±0 % (10) - 1 K (18) - 50 K (E) Linear C-P ±10 % (1) -.5 K (0) K (13) - 5 K () - 50 K (15) - 10 K (3) K (16) - 0 K (5) - 1 M (17) - 5 K (C) CW Audio Cermet ±10 % (10) - 1 K (18) - 50 K (D) CW Audio C-P ±0 % (1) -.5 K (0) K (F) CCW Audio Cermet ±10 % (13) - 5 K () - 50 K (G) CCW Audio C-P ±0 % (15) - 10 K (3) K (S) CW Audio C-P ±10 % (17) - 5 K (5) - 1 M (T) CCW Audio C-P ± 10 % Boldface features are Bourns standard options. All others are available with higher minimum order quantities. EV. 04/18
ELUMILED.COM. Model 91, 92, 93, 94 & 95-5/8 Square Single-Turn Panel Control
*ohs COMPLIANT VESIONS AVAILABLE Features Available in a variety of pin-out configurations Virtually infinite electrical circuit isolation Metal or plastic shaft options ohs compliant versions available*
Features Metal shaft and bushing Consistent, smooth quality feel Up to 4 sections available Rotary switch option designed for on-off function control
*RoHS COMPLIANT VERSIONS AVAILABLE Features Metal shaft and bushing Consistent, smooth quality feel Up to sections available Rotary switch option designed for on-off function control RoHS compliant versions
mm Square Sealed Panel Control
*RoHS COMPLIANT Features Conductive plastic PC board and bushing mount Plastic or metal bushing and plastic shaft Withstands typical industrial washing processes Compact package saves board and panel space
mm Square Sealed Panel Control
*RoHS COMPLIANT Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and
Series S127B Potentiometer 1/2" (12.7mm) Square
Series S17 Potentiometer 1/" (1.7mm) Square Features: Stackable - up to modules onductive Plastic or ermet Resistance lement Linear, W or audio Taper Metal Shaft and ushing Description: The Series S17
Precision Potentiometers
Precision Potentiometers w w w. b o u r n s. c o m I. Product Selection Guide...58 II. Potentiometers Multiturn...60 Single-Turn...65 Knobpot...70 Pushbutton (Digital Readout)...7 III. Definitions & Test
Series 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
or 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y
TOCOS PANEL CONTROLS 30mm Diameter, Single-Turn, Wirewound Industrial Panel Controls RA30YME RA30YD RA30Y Features 30mm diameter, single-turn industrial panel controls Wirewound element Linear or audio
Section 26: Capacitors, Resistors, Potentiometers, Trimmers. Capacitors Resistors Potentiometers Trimmers...
Section 26: Capacitors, Resistors, Potentiometers, Trimmers Sub-Section Page Capacitors.....................................................680 Resistors......................................................681
24mm Diameter, Single-Turn, Carbon Industrial Panel Controls
TOCOS PANEL CONTROLS 24mm Diameter, Single-Turn, Carbon Industrial Panel Controls RV24YN RV24YGME RVT24YN Features 24mm diameter, single-turn industrial panel controls Carbon film element Linear or audio
1/4" Square Single-Turn Cermet Sealed Trimmer
/4" Square Single-Turn Cermet Sealed Trimmer FEATURES Industrial grade Fully sealed Miniature package Rotor designed for automatic machine adjust interface Withstands harsh environments and immersion cleaning
Temperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
Series 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometers
, /" 7 mm Conductive Plastic and Cermet FEATURES Robust construction High rotational life cycles Up to three sections PC support plates Rotary switches and solder lugs terminals available Compliant to
9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
n For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
Series 70 Custom Potentiometer Designer Guide
Series 70 Custom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone Internet POT PROTOTYPES PRONTO! Dual Potentiometer, Dual Rotary
SinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer
1/2" (12.7 mm) Conductive Plastic and Cermet Potentiometer FEATURES Robust construction High rotational life (50 000 cycles) Up to three sections PC support plates Rotary switches and solder lugs terminals
SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
Single Turn Rotary Wirewound Potentiometers
Single Turn Rotary Wirewound Potentiometers THE POTENTIOMETER SPEILISTS QD & QDD Series 1.328" Diameter, 3 watts, Single or Dual Module... pg. 2 Suggested replacement for Honeywell R20 and 43-Series QE
CRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage
627, 628 Series.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor etworks RoHS Compliant ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature
Custom Potentiometer Designer Guide
Custom Potentiometer Designer Guide.015 [0.38mm] 1/8 [3.18mm].250 [6.35mm].055 [1.47mm] 36 Route 10 East Hanover New Jersey 07936 Phone POT PROTOTYPES PRONTO! Now almost any special combination potentiometer
Rotary Potentiometer. 1/2 Watt, Composition. Electrocomponents. Industrial 24mm Diameter. Rotary Potentiometer. Features
Electrocomponents Series 450 Data Sheet Rotary Potentiometer Industrial 4 Diameter 1/ Watt, Composition Rotary Potentiometer Features - Bushing - Twist or Bend Tab - Snap-in PC Bracket - PC Terminal Electrical
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
SF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer QUICK REFERENCE DATA Multiple module Up to 7 modules Switch module n/a Detent module Yes Special electrical laws A: linear, L: logarithmic, F: reverse logarithmic and others
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
No. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
SA2 Series High Voltage Gas Discharge Tube
*RoHS COMPLIANT Features n Formerly a n High insulation resistance n Quick response, long service life n Available DC breakdown range: 2.4 kv to 7.2 kv n Wide operating temperature range n RoHS compliant*
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
Power Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
DIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
SP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
SP1 SP1-4 SP1-12 SP1-25 SP1-50 SP1-4-3 SP SP SP Compact String Pot Voltage Divider Output
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9
SP1 SP1-4 SP1-12 SP1-25 SP1-50 SP1-4-3 SP SP SP Compact String Pot Voltage Divider Output
SP1 Compact String Pot Voltage Divider Output Linear Position to 50 inches (1270 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
CC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
Data Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9.
POTENTIOMETERS ENCODERS & CODED SWITCHES TP/RH7& TP/RH9 www.tocos.com We are TOCOS TOCOS America, Inc. is a wholly owned subsidiary of Tokyo Cosmos Electric Co., Ltd. ( TOCOS), a worldwide supplier of
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
T he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05
INCH-POUND MIL-C-11015/18E 14 May 2001 SUPERSEDING MIL-C-11015/18D 28 September 1970 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 The requirements for
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
SG1 SG1-120 SG SG Voltage Divider Output Signal
SG1 Voltage Divider Output Signal Compact Mid-Range String Pot Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure IP67 In Stock for Quick Delivery 4.7 [119 mm] 6.0 [153 mm] The
XA16ECO/B1PC1S XA16ECO/B4PC1S
XA16ECO/B1PC1S XA16ECO/B4PC1S B4PC1S B1PC1S - 14 1 Amp Single Pole (Single Throw) Switch XA Terminals Bent Extra Long Toward Switch PC Printed Circuit Terminals This image shows the XA terminals located
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
WK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
Applications. Car audio. Robo
Rotary Position Sensor High Rotational Life Type Features High Durability: 1M cycles Pb Free Soldering: 260 C Operating Temperature: -40 C to +85 C Terminal Shape: SMD Type and Lead Type Rotational Rotor:
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
GK-600. Product Classification. Dimensions. Electrical Specifications. Environmental Specifications. General Specifications
GK-600 Standard Grounding Kit for CNT CNT-600 cable OBSOLETE This product was discontinued on: April 9, 2018 This part number is supported until: April 12, 2018 Replaced By GK-SUNV Universal Grounding
Series 70 Custom Potentiometer Designer Guide
Series 70 ustom Potentiometer Designer Guide.05 [0.8mm] /8 [.8mm].50 [6.5mm].055 [.7mm] 6 ROUTE 0, STE 6 EST HNOVER NEW JERSEY 0796 Phone 97-887-550 Toll Free -800-6-808 Fax 97-887-90 Internet http://www.potentiometers.com
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
MF-PSMF Series - PTC Resettable Fuses
*RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**
spectrasymbol.com Rev F3 - Page 1
Features - Linear Position Sensor - IP65 Dust Proof, Water Proof (Intense Spray) - Polyester Substrate - 3M Pressure Sensitive Adhesive (PSA) - Upon Request - Male or Female Nicomatic or Berg - Wiper of
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
MS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
Scheda prodotto Relè Series E
Relè Miniatura All-or-Nothing relays ideally suited for any electronic appliances demanding very compact design and low power consumption. Design includes a protective dust cover and a completete range
Thin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
OW20BU/B4PC1S OW20BU/N4PC1S-CH *
OW20BU/B4PC1S OW20BU/N4PC1S-CH * B4OW1S N4PC1S 4 Amp Single Pole Switch CH Change Over (Double Throw) OW Ordinary Wiring (recommended for soldering) PC For Printed Circuit * Representative of range: Switch
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
Automotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
MYSTR ELEMENTS. % Eo/Ein % TRAVEL % TRAVEL. Examples of monotonic functions. Examples of non-monotonic functions TECHNICAL SPECIFICATIONS DIMENSIONS
MYSTR ELEMENTS Noise 0.03% output smoothness Accuracy Essentially infinite Independent and absolute linearity to ±0.05% V- V- Resistance-Temperature Characteristic Typically ±5% maximum change in total
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
POLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
NL 50 S M / 5 - A - D
NL single-output DC/DC converters 8Vin, Vout, watts How to Order: NL S M / - A - D Series Total Output Power Single Output Industrial (I) or Military (M) INPUT CHARACTERISTICS : Options: Maximum current
High Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
SPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
DETAIL SPECIFICATION SHEET
INCH-POUND 25 November 1996 SUPERSEDING MIL-F-16377/53A(SH) 9 December 1988 DETAIL SPECIFICATION SHEET FIXTURES, INCANDESCENT, DETAIL LIGHTING, LANTERN, HAND, PORTABLE AND RELAY WATERTIGHT SYMBOLS 100.2,
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
Potentiometers and sensors
Potentiometers and sensors Specifications on this catalog are for reference only, as they are subject to change without notice. www.acptechnologies.com CA6 Carbon Potentiometers CA www.acptechnologies.com
ZV/ZVY Series Low Voltage SMD Varistors
Description: The ZV Series of low voltage varistors is designed to protect sensitive electronics devices against high voltage surges in the low voltage region. They offer excellent transient energy absorption
SST-10-R. Red LED. SST-10-Red Product Datasheet. Features: Table of Contents. Applications
SST-10-R Red LED Features: Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3 Optical and Electrical Characteristics...4 High Power Red LED with Peak Wavelength
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND PERFORMANCE SPECIFICATION SHEET MIL-PRF-2886/E 28 Septmebr 206 SUPERSEDING MIL-PRF-2886/D w/amendment 0 May 2005 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION,
RoHS. Specification. Acrich2 Bulb 120V 4.3W SMJE-2V04W1P3. Drawn Approval Approval. Rev. 01 June
Specification RoHS Acrich2 Bulb 120V 4.3W SMJE-2V04W1P3 SSC Customer Drawn Approval Approval 1 Acrich2-120V 4.3W Bulb Description The Acrich 2 series, which are designed for AC drive(or operation), do
Features. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
T he Cole Series P3900 miniature P.C. termination rotary switch
P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification December 30, 2015 V.1 Product specification 2 SCOPE This
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications