500 Series. Databook. Sonesse ULTRA 50 AC and DC

Transcription

1 500 Series Databook Sonesse ULTA 50 AC and DC

2 Why Somfy? Somfy is the leading global manufacturer of strong, quiet, motors with electronic and app controls for interior and exterior window coverings. Over 270 million users worldwide enjoy the more than 150 million motors produced since For more than four decades, Somfy engineers have designed products for both the commercial and residential markets to motorize window coverings such as interior shades, wood blinds, draperies, awnings, rolling shutters, exterior solar screens and projection screens. Somfy motorization systems are easily integrated with security, HVAC and lighting systems, providing total home or building automation. Somfy has a committed customer support team comprised of Somfy motor and control specialists available for assistance: Somfy Corporate Headquarters SOMFY (76639) General Customer Service CustomerService_us@somfy.com Standard Purchase Order Ordering_us@somfy.com ush Purchase Order ExpeditedShippingOrders_us@somfy.com Accounting Inquiries Accountseceivable@somfy.com Technical Support TechnicalSupport_us@somfy.com Warranty Claim equests us_eturn@somfy.com Somfy has a production capacity of more than 70,000 motors per day. Somfy motors have over 600 standards approvals worldwide. Somfy has certified over 100 patents since the year Every Somfy motor goes through an extensive quality assurance process including testing in extreme environmental conditions, for electrostatic discharge, mechanical shock, and high life cycle. Somfy has a network of 15,000 trained professional installers throughout the world. Somfy operates in 60 countries, with 76 subsidiaries, and 60 agencies spread across 5 continents. With 8 production centers, Somfy is an efficient and reactive industry leader. Thanks to its strict quality standards, Somfy is able to satisfy the needs of over 270 million users worldwide. Somfy understands that training and support are critical to success. Somfy s Expert Program provides a platform for those who want to enhance their expertise of Somfy motorization and control solutions. Contact Somfy directly or visit somfysystems.com/expert-program to learn more.

3 TABLE OF CONTENTS SOMFY S 500 SEIES MOTO ANGE Introduction 2-3 SONESSE 50 MOTO ANGE SPECIFICATION SHEETS Sonesse ULTA 50 A 4 Sonesse 50 A 5 Sonesse 50 PA & PS 6 Sonesse ULTA 50 TS 7 Sonesse ULTA 50 DC TS 8 Sonesse 50 TS 9 Sonesse 50 DCT 10 Sonesse ULTA 50 S Sonesse ULTA 50 DC S Sonesse 50 S LT50 MOTO ANGE SPECIFICATION SHEETS LT50 A 14 LT50 A CMO 15 LT50 PA 16 LT50 Altus TS 17 LT50 TS CMO 18 LT50 OEA TS 19 OXIMO TM 50 TS 20 SUNEA TS CMO 21 LT50 DCT 22 LT50 S CONTOL ACCESSOIES adio Technology Somfy (TS) Digital Motor Interfaces 26 animeo IP 26 Wired Controls and Switches HADWAE SYSTEMS, LIGHT GAP SPECIFICATIONS & BACKET POJECTIONS Somfy 2 System 28 Somfy CTS 50 mm System 29 Acmeda ollease Silent Pin 32 ZMC Fascia & Cassette Solutions MECHANICAL ACCESSOIES Motor Brackets Idler Brackets 38 End Caps 39 Intermediate Brackets 40 igid Links 40 Miscellaneous 41 CMO Mechanical Accessories 42 Crowns and Drives Standard and CMO Product Kits 47 Acmeda is a registered trademark of Acmeda International Group Incorporated ollease is a registered trademark of ollease Inc. - Stamford, CT. ZMC is a registered trademark of ZMC Window Coverings Z-Wave is a registered trademark of Zensys, Inc. and its subsidiares ZigBee is a registered trademark of ZigBee Alliance ipad and iphone are registered trademarks of Apple, Inc. 1

4 Somfy s 500 Series Motor ange MOTO IDENTIFICATION KEY Sonesse TS 510 S 2 H Control Technology (If other than Standard Wired) TS = adio Technology Somfy DCT = Dry Contact S485 = Somfy Digital Network Motor Diameter 4 for 40mm 5 for 50mm 6 for 60mm Torque (Nm) Speed : olling Shutter = 14 rpm A: Awning = rpm S: Screen = rpm ange-voltage 120V AC ange 2 230V ange 1 Motor Head Style (If other than Standard Star Head) H = ound Head PA = Progressive Adjustment PS = Progressive Adjustment Switch CMO = Compact Manual Override SOMFY DESIGNED FO SILENCE - Quietness Scale The Sonesse range of motors are rated according to their quietness. The volume scale below appears on all Sonesse range specification pages and designates the motor s level of sound output. < 38 dba < 47 dba < 55 dba SOMFY TECHNOLOGIES adio Technology Somfy adio Technology Somfy (TS) allows wireless radio control of motorized applications via the TS family of controls. WIED TECHNOLOGY Wired Technology Offers control via standard AC switching. DY CONTACT INFAED Dry Contact Is a dry contact input for a basic low voltage control. I-Infrared By simply plugging an I sensor to the control input, DCT can be immediately controlled by any Somfy I remote without any configuration operation. Sonesse 6Nm Motor Electronic Limit Switch Unit with Integrated TS S485 S485 is another control method that uses a two-wired bus. Due to the open source nature of the S485 protocol, many building management systems and home automation systems use this protocol to communicate to devices. Systems that use the S485 connection can be programmed to Somfy S485 motors or controllers to operate the installation. As with all Somfy motors and controls, our motors are backed by a 5 year warranty. Includes Somfy patented antenna that is integrated into the power cord for enhanced reception. 2

5 WHY CHOOSE SOMFY S SONESSE ANGE? Quiet and Strong: Stronger torque for larger applications including multi-banded/ coupled window coverings *Uniform quiet operation in both the up and down directions under 40dBA Wide ange of Solutions: Interior and exterior applications esidential and commercial markets TS, wired and S485 integrated network options Simplified Fabrication and Installation: Utilizes existing fabrication methods on the market today Compatible with leading industry hardware solutions Can be installed in 6 different orientations Advanced design enables simple Snap-On connection for roller tube adaptors Streamlined Programming: TS limits set via radio transmitter Wired simple push-button limit setting Improved S485 commissioning process: Motor auto discovery Motor position feedback Compatible with Somfy s animeo IP system Backward compatibility provides seamless integration with existing Somfy Digital Network projects Multiple intermediate positions Collision detection Superior Quality: Motors undergo rigorous endurance, acoustic, radio, mechanical, electrical and safety tests in our 65,000 sq. ft. quality control and testing facility More than 600 approved standards worldwide Manufactured and sold over 150 million motors Simple Electrical Connection: Available with UL approved 5-15P NEMA plug-in motor cable Plug-in option eliminates the need for an electrician Motor cable length can be customized to meet your installation requirements. All Somfy Motors are UL and CSA ecognized All SOMFY motors are UL ecognized and can be found under the following file numbers: E60495, E60888, E63714 Compatible with all Somfy Snap-on drive wheels. Newly patented and improved spring brake eliminates stopping and tilting noise. A newly patented, asynchronous, high quality, maintenance-free motor that provides perfect rotary part alignment supported by roller bearings. Innovative and patented helical gearbox ensures uniform sound quality in both up and down directions. According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. 3

6 Sonesse ULTA 50 A Star Head and ound Head Motors (rapid limit adjustment) 506A A2H Technical Features WIED TECHNOLOGY Offers control via power switching Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring Specifications Torque 120V AC, 60Hz IP 31 (interior use) apid Adjustment A 46 Turns 506: 32 F to 140 F (0 C to 60 C) Interior use Class 1 for 120V AC Do not parallel wire. 6 Nm * Minimum Torque 0.4 Nm Nominal Voltage 120V / 60Hz ated Current.95A Speed 24 rpm Thermal Protection 4 minutes **Sound Level 38 dba ø 47 ø max. 2 mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart max. 2 mounting holes for self tapping screws. Dia. 4 mm (cat #100405B). Depth 9 mm spaced 1.14 (29 mm) apart in. (783 mm) 30.3 in. (769 mm) SH 31.4 in. (798 mm) H 31.3 in. (795 mm) SJTW Power Cable Length 9.8 ft. (3 m) STA HEAD min. 20 max. OUND HEAD 14.3 max max. ø 63 ø 49.6 < 38 dba < 47 dba < 55 dba * Minimum Torque: Minimum application weight to ensure smooth operation. ** Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Due to the variances of standard aluminum extrusion tolerances, it is recommended to screw the drive wheel & pin end to immobilize them and ensure quiet performance throughout the life of the product. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Type of power cable Wired 120V AC / 60Hz 4 conductor cable white = neutral red = direction 1 black = direction 2 green = ground 4

7 Sonesse 50 A Star Head and ound Head Motors (rapid limit adjustment) 506S S S2H S2H WIED TECHNOLOGY Offers control via power switching Technical Features Voltage Supply Index Protection ating Limit Switch Type 120V AC, 60Hz Limit Switch Capacity 46 Turns Temperature Working ange Insulation Class Wiring Specifications IP 31 (interior use) 506/510 - IP 44 (interior & exterior use) apid Adjustment A 506/510: -4 F to 158 F (-20 C to 70 C) Interior and exterior use Class 1 for 120V AC Do not parallel wire Torque 6 Nm 10 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz ated Current 1.2A 1.67A Speed 32 rpm 32 rpm Thermal Protection 4 minutes 4 minutes *Sound Level 45 dba 47 dba ø 47 ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart mounting holes for self tapping screws. Dia. 4 mm (cat #100405B). Depth 9 mm spaced 1.14 (29 mm) apart in. (603 mm) 23.7 in. (603 mm) 23.2 in. (590 mm) 23.2 in. (590 mm) SH 24.3 in. (616 mm) SH 24.3 in. (616 mm) H 24.1 in. (613 mm) H 24.1 in. (613 mm) Cable Length 6.5 ft. (2 m) 6.5 ft. (2 m) min. 20 STA HEAD OUND HEAD 14.3 max max. ø 63 ø 49.6 < 38 dba < 44 dba < 47 dba < 55 dba * Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Type of power cable Wired 120V AC / 60Hz 4 conductor cable white = neutral red = direction 1 black = direction 2 green = ground 5

8 506S2PA S2PA Technical Features 506S2PS S2PS Sonesse 50 PA & PS (Progressive Limit Adjustment) WIED TECHNOLOGY Offers control via power switching Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring 120V AC, 60Hz 506/510: IP44 (exterior use) Progressive Adjustment PA 29 Turns 506/510: -4 F to 140 F (-20 C to 60 C) exterior use Class 1 for 120V AC Do not parallel wire. ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart. 25 STA HEAD ø min S2PA 506S2PS** 510S2PA 510S2PS** in. (603 mm) in. (603 mm) in. (603 mm) in. (603 mm) in. (590 mm) in. (590 mm) in. (590 mm) in. (590 mm) in. (616 mm) in. (616 mm) in. (616 mm) in. (616 mm) Cable Length 5 in. (.12 m) 5 in. (.12 m) 5 in. (.12 m) 5 in. (.12 m) Specifications 506S2PA 506S2PS** 510S2PA 510S2PS** Torque 6 Nm 6 Nm 10 Nm 10 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz 120V / 60Hz 120V / 60Hz ated Current 1.2A 1.2A 1.67A 1.67A Speed 32 rpm 32 rpm 32 rpm 32 rpm Thermal Protection 4 minutes 4 minutes 4 minutes 4 minutes *Sound Level 45 dba 45 dba 47.2 dba 47.2 dba < 38 dba < 44 dba < 55 dba * Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of the motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from the motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Type of power cable PA Type of power cable PS Wired 120V AC / 60Hz 4 conductor cable white = neutral red = direction 1 black = direction 2 green = ground **Progressive Limit Adjustment with external power switching capability when limit is reached. Wired 120V AC / 60Hz 5 conductor cable 6 white = neutral red = direction 1 black = direction 2 grey = power switching green = ground

9 Sonesse ULTA 50 TS Star Head and ound Head Motors 506A A2H Technical Features Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Antenna Wiring Specifications 120V AC, 60Hz IP 31 (interior use) Electronic TS 250 Turns 32 F to 140 F (0 C to 60 C) (Interior use only) Class 1 for 120V AC Integrated into power cord. Power cord must be at least 12 inches and must not come in contact with metal. Parallel wiring allowed in accordance with NEC and local electrical codes. Torque 6 Nm * Minimum Torque 0.4 Nm Nominal Voltage 120V / 60Hz ated Current.95A Speed 24 rpm Thermal Protection 4 minutes adio Frequency MHz **Sound Level 38 dba ø 47 ø 47 adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls max. 2 mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart max. 2 mounting holes for self tapping screws. Dia. 4 mm (cat #100405B). Depth 9 mm spaced 1.14 (29 mm) apart in. (808 mm) 31.3 in. (795 mm) SH 32.4 in. (823 mm) H 32.3 in. (820 mm) SJTW Power Cable Length 9.8 ft. (3 m) min. 20 max max max. Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. STA HEAD ø 63 OUND HEAD ø 49.6 < 38 dba < 47 dba < 55 dba * Minimum Torque: Minimum application weight to ensure smooth operation. ** Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Due to the variances of standard aluminum extrusion tolerances, it is recommended to screw the drive wheel & pin end to immobilize them and ensure quiet performance throughout the life of the product. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Type of power cable TS 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground 7

10 Sonesse ULTA 50 DC TS New Square Head 504A Technical Features adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. NEW Sleep Mode New feature that allows for advanced programming and grouping. Voltage Supply 24V DC Index Protection ating IP 20 (interior) Limit Switch Type Electronic Limit Switch Capacity 38 Turns Temperature Working ange 32 F to 140 F (0 C to 60 C) (interior use only) Insulation Class Class 3 Wiring In accordance with NEC and local electrical codes. Power Supply Use only Somfy s power supplies to maintain UL listing requirements and guarantee motor s performance. Specifications 2 mounting bosses that accept self tapping screws. Dia. 4 mm, depth 11 mm spaced 1.89 (48 mm) apart. NOTE: Bracket mounting bosses must transfer torque. Data & Power Cable Length SQUAE HEAD 30.7 in. (780 mm) 31.5 in. (800 mm) 10 in. (250 mm) 3 buttons for limit setting and operation * Minimum Torque: Minimum application weight to ensure smooth operation. ** Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when the motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Due to the variances of standard aluminum extrusion tolerances, it is recommended to screw the drive wheel & pin end to immobilize them and ensure quiet performance throughout the life of the product. Interior Tube Diameter (ID) > 47 mm must be respected. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Torque 4 Nm * Minimum Torque 0.4 Nm Nominal Voltage 24V DC ated Current 1.5A Speed Adjustable Thermal Protection 5 minutes **Sound Level 38 dba < 38 dba < 47 dba < 55 dba A motor crown adaptor between motor and end product tube is required to ensure concentric operation of the motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from the motor shaft. Pigtail: Data and Power (Included with every motor. Also available separately, part # ). Maximum Power Cable Length (to guarantee characteristics) GAUGE 14 AWG 16 AWG 18 AWG LENGTH 240 ft. 150 ft. 100 ft. 8

11 Sonesse 50 TS Star Head and ound Head Motors 506S2 510S Technical Features 506S2H S2H adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Voltage Supply 120V AC, 60Hz Index Protection IP 31 (interior use) ating 506/510 - IP 44 (interior & exterior use) Limit Switch Type Electronic TS Limit Switch Capacity 250 Turns Temperature Working ange Insulation Class Antenna Wiring Specifications 506/510: -4 F to 158 F (-20 C to 70 C) interior and exterior use Class 1 for 120V AC Integrated into power cord. Power cord must be at least 12 inches and must not come in contact with metal. Parallel wiring allowed in accordance with NEC and local electrical codes Torque 6 Nm 10 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz ated Current 1.2A 1.67A Speed 32 rpm 32 rpm Thermal Protection 4 minutes 4 minutes adio Frequency MHz MHz *Sound Level 45 dba 47 dba < 38 dba < 44 dba < 47 dba < 55 dba ø 47 ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart mounting holes for self tapping screws. Dia. 4 mm (cat #100405B). Depth 9 mm spaced 1.14 (29 mm) apart in. (653 mm) 25.7 in. (653 mm) 25.2 in. (640 mm) 25.2 in. (640 mm) SH 26.2 in. (666 mm) SH 26.2 in. (666 mm) H 26.1 in. (663 mm) H 26.1 in. (663 mm) Cable Length 6.5 ft. (2 m) 6.5 ft. (2 m) min max max. Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. STA HEAD ø 63 OUND HEAD ø 49.6 * Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Type of power cable TS 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground 9

12 Sonesse 50 DCT Star Head Motors 506S S Technical Features DY CONTACT Motors that can be controlled via contact closure (dry contact) or infrared. Voltage Supply Index Protection ating IP 44 Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring Specifications 120V AC, 60Hz Electronic 300 Turns -4 F to 140 F (-20 C to 60 C) Class 1 for 120V AC Parallel wiring allowed in accordance with NEC and local electrical codes. Torque 6 Nm 10 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz ated Current 1.2A 1.66A Speed 32 rpm 32 rpm Thermal Protection 4 minutes 4 minutes *Sound Level 45 dba 47.2 dba < 38 dba < 44 dba < 55 dba * Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: ø min mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart in. (653 mm) in. (673 mm) in. (640 mm) in. (660 mm) in. (666 mm) in. (686 mm) Power Cable Length 1.4 ft. (.44 m) 1.4 ft. (.44 m) Data Cable Length 1 ft. (.3 m) 4 wire 1 ft. (.3 m) 4 wire Type of power cable DCT 120V AC / 60Hz 3 conductor cable Data Cable 3.95 white = neutral black = hot green = ground STA HEAD ø 63 Operational noise level is reduced when motor, tube, and accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of the motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from the motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. J9 Pin Outs Optional Data Cables: DCT white data cable - 1 ft. (.3 m) Part # DCT white data cable - 5 ft. (1.5 m) Part # DCT white data cable - 25 ft. (7.5 m) Part # DCT white data cable - 50 ft. (15 m) Part #

13 Sonesse ULTA 50 S485 Star Head Motor 506A Technical Features Voltage Supply 120V AC, 60Hz Index Protection ating IP 31 (interior) Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring Specifications Torque Electronic 300 Turns 32 F to 140 F (0 C to 60 C) (interior use only) Class 1 for 120V AC Parallel wiring allowed in accordance with NEC and local electrical codes. 6 Nm * Minimum Torque 0.4 Nm Nominal Voltage 120V / 60Hz ated Current.95A Speed 24 rpm Thermal Protection 4 minutes **Sound Level 38 dba < 38 dba < 47 dba < 55 dba ø max. 2 mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart in. (838 mm) 32.5 in. (825 mm) 33.6 in. (853 mm) SJTW Power Cable Length 9.8 ft. (3 m) Data Cable (must be ordered separately) min. 20 max. Customizable and available in various lengths Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Type of power cable 120V AC / 60Hz 3 conductor cable A new generation of intelligent motors that are controlled and monitored via Somfy Digital Network solutions and animeo IP total solar management system. white = neutral black = hot green = ground STA HEAD ø 63 * Minimum Torque: Minimum application weight to ensure smooth operation. ** Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Due to the variances of standard aluminum extrusion tolerances, it is recommended to screw the drive wheel & pin end to immobilize them and ensure quiet performance throughout the life of the product. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Data Cable: J9/J45 (sold separately) J9 connects to motor 1 + S GND 3 Not Connected * Power Out ** * Data cable (black) for animeo IP networks ** Data cable (grey) for powering external modules J45 connects to network 1 + S S485 3 Not Connected 4 Not Connected * Power Out ** 8 GND 7 Not Connected 6 Not Connected 5 Not Connected Visit somfysystems.com/sdn-2-0 for complete information on SDN 2.0 Bus Distribution Products Cond. 26AWG modular cable with J9 on one end and J45 other end - (TS, Z-Wave, ZigBee modules) GEY WITH POWE OUT 4 Cond. 26AWG modular cable with J9 on one end and J45 other end - (SDN - animeo IP) BLACK WITHOUT POWE OUT 2.5 ft. long 8 ft. long 12 ft. long 24 ft. long 2.5 ft. long 8 ft. long 12 ft. long 24 ft. long # # # # # # # #

14 Sonesse ULTA 50 DC S485 New Square Head 504A A new generation of intelligent motors that are controlled and monitored via Somfy Digital Network solutions and animeo IP total solar management system. Technical Features Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange 24V DC IP 20 (interior use) Electronic 38 Turns 32 F to 140 F (0 C to 60 C) (interior use only) Insulation Class Class 3 Wiring In accordance with NEC and local electrical codes. Power Supply Specifications Use only Somfy s power supplies to maintain UL listing requirements and guarantee motor s performance. 2 mounting bosses that accept self tapping screws. Dia. 4 mm, depth 11 mm spaced 1.89 (48 mm) apart. NOTE: Bracket mounting bosses must transfer torque. Data & Power Cable Length SQUAE HEAD 30.7 in. (780 mm) 31.5 in. (800 mm) 10 in. (250 mm) 3 buttons for limit setting and operation * Minimum Torque: Minimum application weight to ensure smooth operation. Torque 4 Nm ** Sound Level: According to standards ISO 3741 NF in dba * Minimum Torque 0.4 Nm ref 1pW at nominal torque without end product. Nominal Voltage 24V DC Fabrication ecommendations: ated Current 1.5A Operational noise level is reduced when the motor, tube, and Speed Adjustable mechanical accessories are properly adapted to motorized applications. Thermal Protection 5 minutes Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. **Sound Level 38 dba Due to the variances of standard aluminum extrusion tolerances, it is recommended to screw the drive wheel & pin end to immobilize them and ensure quiet performance throughout the life of the < 38 dba < 47 dba < 55 dba product. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of the motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from the motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Pigtail: Data and Power (Included with every motor. Also available separately, part # ). Maximum Power Cable Length (to guarantee characteristics) GAUGE 14 AWG 16 AWG 18 AWG LENGTH 240 ft. 150 ft. 100 ft. Visit somfysystems.com/sdn-2-0 for complete information on SDN 2.0 Bus Distribution Products. 12

15 506S S Sonesse 50 S485 Star Head Motor A new generation of intelligent motors that are controlled and monitored via Somfy Digital Network solutions and animeo IP total solar management system. Technical Features Voltage Supply 120V AC, 60Hz Index Protection ating IP 44 (interior & exterior use) Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring Specifications Electronic 300 Turns -4 F to 158 F (-20 C to 70 C) (interior and exterior use) Class 1 for 120V AC Parallel wiring allowed in accordance with NEC and local electrical codes Torque 6 Nm 10 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz ated Current 1.2A 1.66A Speed 32 rpm 32 rpm Thermal Protection 4 minutes 4 minutes *Sound Level 45 dba 47 dba ø max. 2 mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart min. 20 max in. (653 mm) 26.5 in.(673 mm) 25.2 in. (640 mm) 26.0 in. (660 mm) 26.2 in. (666 mm) 27.0 in. (686 mm) SJTW Power Cable Length 9.8 ft. (3 m) 9.8 ft. (3 m) Data Cable (must be ordered separately) Customizable and available in various lengths Customizable and available in various lengths Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Type of power cable STA HEAD ø 63 < 38 dba < 45 dba < 47 dba < 55 dba 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground ** Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube to ensure quiet performance of the motor. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Data Cable: J9/J45 (sold separately) J9 connects to motor 1 + S GND 3 Not Connected * Power Out ** * Data cable (black) for animeo IP networks ** Data cable (grey) for powering external modules J45 connects to network 1 + S S485 3 Not Connected 4 Not Connected * Power Out ** 8 GND 7 Not Connected 6 Not Connected 5 Not Connected Visit somfysystems.com/sdn-2-0 for complete information on SDN 2.0 Bus Distribution Products Cond. 26AWG modular cable with J9 on one end and J45 other end - (TS, Z-Wave, ZigBee modules) GEY WITH POWE OUT 2.5 ft. long 8 ft. long 12 ft. long 24 ft. long 4 Cond. 26AWG modular cable with J9 on one end and J45 other end - (SDN - animeo IP) BLACK WITHOUT POWE OUT 2.5 ft. long 8 ft. long 12 ft. long 24 ft. long # # # # # # # #

16 LT50 A Star Head and ound Head Motors (rapid limit adjustment) 506S S A S A A S2H S2H S2H H A2H WIED TECHNOLOGY Offers control via power switching Technical Features Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring 120V AC, 60Hz IP 44 apid Adjustment A 46 Turns 14 F to 140 F (-10 C to 60 C) Class 1 for 120V AC Do not parallel wire. ø 47 ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart mounting holes for self tapping screws. Dia. 4 mm (cat #100405B). Depth 9 mm spaced 1.14 (29 mm) apart min max. STA HEAD OUND HEAD max. ø 63 ø S2 510S2 515A2 515S in in in in in in in in in in. (525 mm) (555 mm) (525 mm) (605 mm) (525 mm) (555 mm) (555 mm) (605 mm) (605 mm) (605 mm) (Star Head only) (ound Head only) in. (510 mm) in. (533 mm) in. (530 mm) in. (540 mm) in. (563 mm) in. (560 mm) in. (510 mm) in. (533 mm) in. (590 mm) in. (613 mm) in. (610 mm) in. (510 mm) in. (533 mm) in. (533 mm) Cable Length 6.5 ft. (2 m) Optional cables available in 6 ft, 10 ft, 12 ft, 24 ft. Specifications in. (540 mm) in. (563 mm) in. (563 mm) white = neutral red = direction 1 black = direction 2 green = ground in. (540 mm) in. (563 mm) in. (590 mm) in. (613 mm) in. (590 mm) in. (613 mm) in. (590 mm) in. (613 mm) 506S2 510S2 515A2 515S Torque 6 Nm 10 Nm 15 Nm 15 Nm 20 Nm 25 Nm 30 Nm 35 Nm 40 Nm 50 Nm Nominal Voltage 120V / 60Hz ated Current.95A 1.3A 1.1A 1.8A 1.1A 1.6A 1.5A 2.1A 1.8A 2.1A Speed 38 rpm 38 rpm 20 rpm 38 rpm 14 rpm 20 rpm 14 rpm 20 rpm 14 rpm 14 rpm Thermal Protection 5 minutes Sound Level (H only) 55 dba 56 dba NA 56 dba NA NA NA NA NA NA Type of power cable Wired 120V AC / 60 Hz 4 conductor cable

17 LT50 A CMO (apid Limit Adjustment - Compact Manual Override) 525A2 CMO CMO A2 CMO CMO CMO WIED TECHNOLOGY Offers control via power switching Technical Features Voltage Supply Index Protection ating 120V AC, 60Hz IP 44 Temperature Working ange Insulation Class 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC Limit Switch Type apid Adjustment (A) (includes manual override) Wiring Do not parallel wire. Limit Switch Capacity 34 Turns Ø4.5/114 ø 47 Ø.48/12 Ø.96/24.79/20.16/4.98/25.49/ /86 HEX.275 /7mm or SQUAE.236 /6mm 525A2 CMO 5302 CMO 535A2 CMO 5402 CMO 5502 CMO in. (594 mm) in. (594 mm) in. (664 mm) in. (664 mm) in. (664 mm) in. (579 mm) in. (579 mm) in. (649 mm) in. (649 mm) in. (649 mm) in. (607 mm) in. (607 mm) in. (677 mm) in. (677 mm) in. (677 mm) Cable Length 6 ft. (1.8 m) Optional cables available in 6 ft, 12 ft, 24 ft. Specifications 525A2 CMO 5302 CMO 535A2 CMO 5402 CMO 5502 CMO Torque 25 Nm 30 Nm 35 Nm 40 Nm 50 Nm Nominal Voltage 120V / 60Hz ated Current 1.6A 1.5A 2.1A 1.8A 2.1A Speed 20 rpm 14 rpm 20 rpm 14 rpm 14 rpm Thermal Protection 5 minutes Type of power cable Wired 120V AC / 60Hz 4 conductor cable white = neutral red = direction 1 black = direction 2 green = ground 15

18 LT50 PA (Progressive Limit Adjustment) 5102PA A2PA WIED TECHNOLOGY Offers control via power switching Technical Features Voltage Supply 120V AC, 60Hz Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange IP 44 Progressive Adjustment PA 29 Turns 14 F to 104 F (-10 C to 40 C) ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart. 25 STA HEAD ø min. 20 Insulation Class Class 1 for 120V AC Wiring Do not parallel wire. 5102PA 535A2PA in. (505 mm) in. (605 mm) in. (490 mm) in. (590 mm) in. (513 mm) in. (613 mm) Cable Length 5 in. (.12 m) 3.28 ft. (1 m) Specifications 5102PA 535A2PA Torque 10 Nm 35 Nm Nominal Voltage 120V / 60Hz ated Current.7A 2.1A Speed 14 rpm 20 rpm Thermal Protection 5 minutes Sound Level NA NA Type of power cable PA Wired 120V AC / 60Hz 4 conductor cable white = neutral red = direction 1 black = direction 2 green = ground 16

19 LT50 Altus TS Star Head and ound Head Motors 506S S A A adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Technical Features Voltage Supply Index Protection ating IP 44 Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class 120V AC, 60Hz Electronic TS 250 Turns 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart. 25 STA HEAD ø min. 20 Wiring Integrated into power cord. Must be at least 12 inches and must not come in contact with metal in in in in in in in. (605 mm) (655 mm) (655 mm) (655 mm) (605 mm) (605 mm) (605 mm) in. (590 mm) SH in. (613 mm) H in. (610 mm) in. (640 mm) SH in. (663 mm) H in. (660 mm) in. (640 mm) in. (663 mm) in. (640 mm) in. (663 mm) in. (660 mm) in. (683 mm) in. (660 mm) in. (683 mm) in. (660 mm) in. (683 mm) Cable Length 6.5 ft. (2 m) 6.5 ft. (2 m) 12.3 ft. (3.75 m) 6.5 ft. (2 m) 12.3 ft. (3.75 m) 6.5 ft. (2 m) 6.5 ft. (2 m) Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Specifications Torque 6 Nm 10 Nm 25 Nm 30 Nm 35 Nm 40 Nm 50 Nm Nominal Voltage 120V/60Hz ated Current 1.1A 1.3A 1.6A 1.5A 2.1A 1.8A 2.1A Speed 38 rpm 38 rpm 20 rpm 14 rpm 20 rpm 14 rpm 14 rpm Thermal Protection 5 minutes adio Frequency MHz Type of power cable TS 120V AC / 60 Hz 3 conductor cable white = neutral black = hot green = ground 17

20 LT50 TS CMO (Compact Manual Override) 525A2 CMO CMO A2 CMO Technical Features 5402 CMO CMO adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity 120V AC, 60Hz IP 44 apid Adjustment A and Electronic eceiver Integrated in motor tube 34 Turns Temperature Working ange Insulation Class 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC Antenna Integrated into power cord. Must be at least 12 inches and must not come in contact with metal. Wiring Parallel wiring allowed in accordance with NEC and local electrical codes. Ø4.5/114 ø 47 Ø.48/12 Ø.96/24.79/20.16/4.98/25.49/ /86 HEX.275 /7mm or SQUAE.236 /6mm 525A2 CMO 5302 CMO 535A2 CMO 5402 CMO 5502 CMO in. (774 mm) in. (774 mm) in. (774 mm) in. (774 mm) in. (774 mm) in. (759 mm) in. (759 mm) in. (759 mm) in. (759 mm) in. (759 mm) in. (787 mm) in. (787 mm) in. (787 mm) in. (787 mm) in. (787 mm) Cable Length 12 ft. (3.6 m) 6 ft. (1.8 m) 12 ft. (3.6 m) 6 ft. (1.8 m) 6 ft. (1.8 m) Optional cables with NEMA plugs available in 6 ft, 12 ft, 18 ft, 24 ft. Specifications 525A2 CMO 5302 CMO 535A2 CMO 5402 CMO 5502 CMO Torque 25 Nm 30 Nm 35 Nm 40 Nm 50 Nm Nominal Voltage 120v / 60Hz ated Current 1.6A 1.5A 2.1A 1.8A 2.1A Speed 20 rpm 14 rpm 20 rpm 14 rpm 14 rpm Thermal Protection 5 minutes adio Frequency MHz Type of power cable TS 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground 18

21 LT50 Orea TS Specifically designed for use in cassette awnings only 535A Technical Features adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity 120V AC, 60Hz IP 44 Electronic TS 250 Turns Temperature Working ange Insulation Class 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC Antenna Integrated into power cord. Must be at least 12 inches and must not come in contact with metal. Wiring Parallel wiring allowed in accordance with NEC and local electrical codes. ø min. 20 ø 63 2 mounting holes for self tapping screws. Dia. 5 mm (cat # ) Depth 13 mm Spaced 1.89 (48 mm) apart in. (675 mm) in. (675 mm) in. (660 mm) in. (660 mm) in. (683 mm) in. (683 mm) Cable Length 13.1 ft. (4 m) Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Specifications Torque 35 Nm 50 Nm Nominal Voltage 120V / 60HZ ated Current 2.1A Please Note: Orea TS motor is specifically designed for cassette awnings only. Automatic limit setting in the UP direction. Speed 20 rpm 14 rpm Thermal Protection 5 minutes adio Frequency MHz MHz Type of power cable TS 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground 19

22 Oximo TM 50 TS Star Head 525A Technical Features adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity 120V AC, 60Hz IP 44 Electronic TS 200 Turns Temperature Working ange Insulation Class 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC Antenna Integrated into power cord. Must be at least 12 inches and must not come in contact with metal. Wiring Parallel wiring allowed in accordance with NEC and local electrical codes. ø min. 20 ø in. (655 mm) in. (640 mm) in. (663 mm) Cable Length 6.5 ft. (2 m) Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Specifications Torque 25 Nm Nominal Voltage 120V / 60HZ ated Current 1.6A Speed 20 rpm Thermal Protection 4 minutes adio Frequency MHz Type of power cable TS 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground 20

23 Sunea TS CMO (Compact Manual Override) Specifically designed for use in cassette and standard retractable awnings only 525A2 CMO A2 CMO CMO Technical Features adio Technology Somfy (TS) allows for wireless radio control of motorized window coverings via the TS family of controls. Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity 120V AC, 60Hz IP 44 Electronic TS 250 Turns Temperature Working ange Insulation Class 14 F to 104 F (-10 C to 40 C) Class 1 for 120V AC Antenna Integrated into power cord. Must be at least 12 inches and must not come in contact with metal. Wiring Parallel wiring allowed in accordance with NEC and local electrical codes. 32 max. 18 ø 95 ø HEX.275 /7mm or SQUAE.236 /6mm 525A2 CMO 535A2 CMO 5502 CMO in. (696 mm) in. (696 mm) in. (696 mm) in. (684 mm) in. (684 mm) in. (684 mm) in. (720 mm) in. (720 mm) in. (720 mm) Optional fast connector cables with NEMA plugs available in 11 ft, 17 ft, 23 ft. Specifications 525A2 CMO 535A2 CMO 5502 CMO Torque 25 Nm 35 Nm 50 Nm Nominal Voltage 120V / 60HZ ated Current 1.6A 2.1A 2.1A Speed 20 rpm 20 rpm 14 rpm Thermal Protection adio Frequency Type of power cable - SJTW + 18 in. Fast Connector - Male (Do not cut fast connector cable) 4 minutes MHz 21

24 LT50 DCT Star Head and ound Head Motors 506S S A DY CONTACT Motors that can be controlled via contact closure (dry contact) or infrared. Technical Features Voltage Supply Index Protection ating Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class 120V AC, 60Hz IP 44 Electronic 300 Turns -4 F to 158 F (-20 C to 70 C) Class 1 for 120V AC ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apar min. 20 STA HEAD ø 63 Specifications Torque 6 Nm 15 Nm 35 Nm Nominal Voltage 120V / 60Hz ated Current.95A 1.8A 2.1A Speed 38 rpm 38 rpm 20 rpm Thermal Protection 5 minutes Sound Level 55 dba 56 dba 58 dba in in in. (605 mm) (675 mm) (675 mm) Star Head ound Head in. (590 mm) in. (613 mm) in. (610 mm) in. (660 mm) in. (683 mm) in. (680 mm) Power Cable Length 6.5 ft. (2 m) Data Cable Length (included) 1 ft. (.3 m) / 4 wires / J9 phone connectors in. (660 mm) in. (683 mm) in. (680 mm) 5 ft. (1.5 m) / 4 wires / J9 phone connectors Type of power cable Data Cable DCT: 120V AC / 60Hz 3 threads by wire white = neutral black = hot green = ground J9 Pin Outs PIN COLO Dry Contact I Contact 4 ED OPEN I 3 BLUE GND GND 2 WHITE - +5V 1 YELLOW CLOSE Optional Data Cables: DCT white data cable - 1 ft. (.3 m) # DCT white data cable - 5 ft. (1.5 m) # DCT white data cable - 25 ft. (7.5 m) # DCT white data cable - 50 ft. (15 m) #

25 515S A LT50 S485 Star Head Motor A new generation of intelligent motors that are controlled and monitored via Somfy Digital Network solutions and animeo IP total solar management system. Technical Features Voltage Supply 120V AC, 60Hz Index Protection ating IP 44 (interior & exterior use) Limit Switch Type Limit Switch Capacity Temperature Working ange Insulation Class Wiring Specifications Electronic 300 Turns -4 F to 140 F (-20 C to 60 C) (interior and exterior use) Class 1 for 120V AC Parallel wiring allowed in accordance with NEC and local electrical codes Torque 15 Nm 35 Nm Nominal Voltage 120V / 60Hz 120V / 60Hz ated Current 1.8A 2.1A Speed 38 rpm 20 rpm Thermal Protection 4 minutes 4 minutes *Sound Level 55 dba 55 dba ø mounting holes for self tapping screws. Dia. 5 mm (cat # ). Depth 13 mm spaced 1.89 (48 mm) apart in. (675 mm) in. (660 mm) in. (683 mm) SJTW Power Cable Length 9.8 ft. (3 m) Data Cable (must be ordered separately) min. 20 Customizable and available in various lengths Optional cables with NEMA plugs available in 3 ft, 6 ft, 10 ft, 12 ft, 18 ft, 24 ft. Type of power cable 120V AC / 60Hz 3 conductor cable white = neutral black = hot green = ground STA HEAD ø 63 * Sound Level: According to standards ISO 3741 NF in dba ref 1pW at nominal torque without end product. Fabrication ecommendations: Operational noise level is reduced when motor, tube, and mechanical accessories are properly adapted to motorized applications. Free play must be minimized between the accessories and the end product tube. Interior Tube Diameter (ID) > 47 mm must be respected. A motor crown adaptor between motor and end product tube is required to ensure concentric operation of motor. 500 Series Drive Stop and Screw ( ) is recommended to prevent noise and drive wheel separation from motor shaft. Somfy Soft Clip Drive Wheel Adaptors (brown in color) are not recommended. Data Cable: J9/J45 (sold separately) J9 connects to motor 1 + S GND 3 Not Connected * Power Out ** * Data cable (black) for animeo IP networks ** Data cable (grey) for powering external modules J45 connects to network 1 + S S485 3 Not Connected 4 Not Connected * Power Out ** 8 GND 7 Not Connected 6 Not Connected 5 Not Connected Visit somfysystems.com/sdn-2-0 for complete information on SDN 2.0 Bus Distribution Products Cond. 26AWG modular cable with J9 on one end and J45 other end - (TS, Z-Wave, ZigBee modules) GEY WITH POWE OUT 2.5 ft long 8 ft long 12 ft long 24 ft long 4 Cond. 26AWG modular cable with J9 on one end and J45 other end - (SDN - animeo IP) BLACK WITHOUT POWE OUT 2.5 ft long 8 ft long 12 ft long 24 ft long # # # # # # # #

26 CONTOL ACCESSOIES Learn more about controls and accessories and download TS brochure at ADIO TECHNOLOGY SOMFY (TS) TELIS COLLECTION Telis 1 TS Lounge Single Channel emote Telis 4 TS Lounge Five Channel emote Telis 1 TS Silver Single Channel emote Telis 4 TS Silver Five Channel emote Telis 1 TS Pure Single Channel emote Telis 4 TS Pure Five Channel emote Telis 1 Soliris TS Patio Telis 4 Soliris TS Patio Telis 1 Soliris TS Pure Telis 1 TS Patio Single Channel emote Telis 4 TS patio Five Channel emote Telis 1 Modulis TS Pure with Scroll Wheel Telis 4 Modulis TS Pure with Scroll Wheel Telis 16 Channel TS Pure emote with On-screen display Telis 16 Channel TS Silver emote with On-screen display Telis 1 Chronis TS Pure Timer with On-screen display Telis 1 Chronis TS Silver Timer with On-screen display DECOFLEX WIEFEE WALL SWITCHES SMOOVE WALL SWITCH SHADE SHADE SHADE SHADE SHADE SHEE SHEE SHEE SHEE BEDOOM BEDOOM BEDOOM DINING M DINING M FOYE Smoove 1 TS Pure DecoFlex 1 Channel TS WireFree TM Wall Switch DecoFlex 2 Channel TS WireFree TM Wall Switch DecoFlex 3 Channel TS WireFree TM Wall Switch DecoFlex 4 Channel TS WireFree TM Wall Switch DecoFlex 5 Channel TS WireFree TM Wall Switch Battery-operated convenience Surface mounts with ease Frames available in 7 colors Wall Switches shown in white. Also available in black and ivory finishes. Shown assembled with printed channel buttons. Custom engraved buttons are also available. Black Ivory Pure Silver Matte Black Light Bamboo Amber Bamboo Cherry Walnut TABLE TOP ACCESSOIES DecoFlex WireFree TS Table Top Accessory Black * *DecoFlex Switch sold separately from Table Top Accessory. DecoFlex WireFree TS Table Top Accessory Silver * DecoFlex WireFree TS Table Top Accessory White * 24

27 CONTOL ACCESSOIES ADIO TECHNOLOGY SOMFY (TS) ZTSI mylink TM 16 CHANNEL INTEFACE TS EPEATE Z-Wave to TS Interface 2 WiFi to TS Interface Control window coverings, awnings, screens and rolling shutters with a smartphone or tablet. A simple on-screen set up wizard helps users create timed events, scenes and more. Compatible with ios and Android. Universal TS Interface 16-Channel (Converts I, S232, S485 to TS) TS epeater DIMMABLE LED TS LIGHT KIT OUTDOO ECEIVES DY CONTACT INTEFACE Warm White Dimmable LED TS Light Kit Dimming LED TS eceiver Cool White Outdoor Lighting eceiver TS Dry Contact Interface Single Channel Universal TS eceiver SUNIS & THEMOSUNIS INDOO SENSOS EOLIS 3D SENSO EOLIS SENSO SOLIIS SENSO ONDEIS AIN & SUN SENSO Sunis Indoor WireFree TS ThermoSunis Indoor WireFree TS Eolis 3D WireFree TS Wind Sensor Eolis TS Wind Sensor 24V Soliris TS Sun and Wind Sensor 24V Ondeis WireFree TS ain and Sun Sensor

28 CONTOL ACCESSOIES DIGITAL MOTO INTEFACES animeo IP ZDMI ZBDMI animeo IP is a total solar management system utilizing Somfy-powered intelligent motorized window coverings as well as digital keypads and weather sensors. The system s controllers, sensors and keypads can be added to both new and existing Somfy Digital Network installations for comprehensive solar management as either a stand-alone solution or integrated into third party control systems. An intuitive user interface allows for simplified commissioning, building management and technical support, featuring drag-and-drop Z-Wave to Digital Motor Interface ZigBee to Digital Motor Interface programming, motor auto discovery and at-a glance system status update. Visit to learn more animeo IP Building Controller WIED AC CONTOLS & SWITCHES WIED TECHNOLOGY GOUP CONTOL SYSTEM II (GCS II) Group Control System II (GCS II) GCS II TS adio eceiver INDIVIDUAL GOUP CONTOL (IGC) 4N1 MOTO CONTOLLE IGC 4N1 Motor Controller IGC 4N1 TS adio eceiver DecoFlex Dry Contact Keypad