LIGHTING CONSTRUCTION MANUAL POLE BRACKETS MINOR ROAD

Transcription

1 CONSTRUCTION MNUL POLE BRCKETS MINOR ROD Back to MIN INDEX Go to SECTION INDEX

2

3 WOOD POLE BRCKETS CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SL WPB/MI BC STREETLIGHT SL = Streetlight BRCKET WPB = Bracket CONNECTION BC = Service connection to LVBC Mains l = Service connection to luminium Mains Cu = Service connection to Copper mains SER = Supplied via BC Service BRCKET TYPE MI =.m Outreach, Minor Road MI = 3.0m Outreach.0m Uplift, Minor Road MI3 = 0.5m Outreach, Minor Road PT = 0.3m Outreach Type PT, Minor Road (Refer to Construction Drawing -7-8-) EXMPLE:- SLWPB/MIBC = Streetlight, Bracket, Minor Road Type.m Outreach, Service connection to LVBC mains. J. Brooks 4/0/0 POLE BRCKETS MINOR ROD - ERGON ENERGY ONLY R. English 4/0/0 CONSTRUCTION TYPE GUIDE BN BN HRD COPY UNCONTROLLED D. Taylor / B. Oyegoke 4/0/0 4/0/0 WOOD POLE MINOR ROD EE DRWG NO: -8-- EGX DRWG NO: VOLUME OLDER PGE 8-0

4 STREETLIGHT LUMINIRE MINOR ROD CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SL HPS 000 PRODUCT CODE 000 = Sylvania Suburban 70W HPS 000 = Sylvania Urban eroscreen 70W HPS 0003 = Sylvania Suburban 3W CL 0004 = Sylvania Urban eroscreen 3W CL 0005 = Sylvania Suburban 35W MH 0006 = Sylvania Urban eroscreen 35W MH 0007 = Sylvania Suburban 70W MH 0008 = Sylvania Urban eroscreen 70W MH 003 = Greenstreet T5 x 4W STREETLIGHT LED LUMINIRE MINOR ROD CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SLED GE 050 N LUMINIRE TYPE STREETLIGHT SUPPLIER IDENTIIER BILLBLE LOD N = Normal (semi cut-off) SLED = Streetlight LED GE = GE 050 = 5W STREETLIGHT LMP TYPE ND WTTGE SL = Streetlight HPS = High Pressure Sodium Vapour L = Linear luorescent CL = Compact luorescent MH = Metal Halide EXMPLE:- SL HPS 000 = Streetlight, High pressure sodium vapour, 70W EXMPLE:- SL MH 0005 = Streetlight, metal halide, 35W EXMPLE:- SLED GE 050 N = Streetlight LED, GE, 5.0W, Normal semi cut-off ORIGINL B C D REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 4/0/0 POLE BRCKETS MINOR ROD - ERGON ENERGY ONLY CONSTRUCTION TYPE GUIDE WOOD POLE LUMINIRE MINOR ROD EE DRWG NO: -8-- EGX DRWG NO: VOLUME OLDER PGE 8-0D

5 CONCRETE POLE BRCKETS CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SL CPB/MI SER STREETLIGHT SL = Streetlight BRCKET CPB = Concrete Bracket CONNECTION SER = Supplied via BC Service BRCKET TYPE MI =.m Outreach, Minor Road MI = 3.0m Outreach.0m Uplift, Minor Road EXMPLE:- SLCPB/MISER = Streetlight, Concrete Bracket,.m outreach, Minor Road, Supplied via BC Service. J. Brooks 4/0/0 POLE BRCKETS MINOR ROD - ERGON ENERGY ONLY R. English 4/0/0 CONSTRUCTION TYPE GUIDE BN BN HRD COPY UNCONTROLLED D. Taylor / B. Oyegoke 4/0/0 4/0/0 CONCRETE POLE MINOR ROD EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8-3 0

6

7 STREETLIGHT LUMINIRE MINOR ROD CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SL HPS 000 PRODUCT CODE 000 = Sylvania Suburban 70W HPS 000 = Sylvania Urban eroscreen 70W HPS 0003 = Sylvania Suburban 3W CL 0004 = Sylvania Urban eroscreen 3W CL 0005 = Sylvania Suburban 35W MH 0006 = Sylvania Urban eroscreen 35W MH 0007 = Sylvania Suburban 70W MH 0008 = Sylvania Urban eroscreen 70W MH 003 = Greenstreet T5 x 4W 0033 = Greenstreet T5 x 4W STREETLIGHT LED LUMINIRE MINOR ROD CONSTRUCTION TYPE Type shown within dashed box appears on relevant construction detail drawings in this manual. SLED GL 070 N LUMINIRE TYPE STREETLIGHT SUPPLIER IDENTIIER BILLBLE LOD N = Normal (semi cut-off) = eroscreen (full cut-off) SLED = Streetlight LED GE = GE GL = Gerard Lighting 070 = 7W 050 = 5W STREETLIGHT LMP TYPE ND WTTGE SL = Streetlight HPS = High Pressure Sodium Vapour L = Linear luorescent CL = Compact luorescent MH = Metal Halide EXMPLE:- SL HPS 000 = Streetlight, High pressure sodium vapour, 70W EXMPLE:- SL MH 0005 = Streetlight, metal halide, 35W EXMPLE:- SLED GL 070 N = Streetlight LED, Gerard Lighting, 7.0W, Normal (semi cut-off) ORIGINL B C REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 4/03/4 POLE BRCKETS MINOR ROD - ENERGEX ONLY CONSTRUCTION TYPE GUIDE WOOD POLE LUMINIRE MINOR ROD EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8-5 0C

8 MTERIL - BRCKET & SUPPLY SSY ORIGINL B C REERENCE DRWING ENERGEX pproved Ergon pproved Energex REERENCE DRWING ERGON. Zaini Checked BN BN DESCRIPTION QTY Bracket MI & cable, mounting to wood pole use holder 00 (service) to bracket Cartridge fuse link 3 HRC Saddle (0mm) to wood pole Bracket cable support to x-arm Connector Tap-off bare aluminium mains Connector Tap-off bare copper mains End cap - push on 5mm BC Connector I.P.C. 5/95mm main to 6/35mm tap luminium / 4-35mm Copper Thru Connector Conduit PVC flexible - 6mm. R HRD COPY UNCONTROLLED P. Relf /. Bletchly R R R MTERIL - LUMINIRE SSY DESCRIPTION QTY 87-3 S C3 87- H Luminaire normal lamp and PE cell H L L x 4W L R 900- x 4W L 87-7 S C Luminaire aeroscreen lamp and PE cell H H L7 D E /04/7 0/0/0 NOTES: conductors:- POLE BRCKETS MINOR ROD WOOD POLE.m OUTRECH TYPE MI - MTERIL EE DRWG NO: Bracket/Luminaire minimum clearance to L.V. = 00mm kv-kv-33kv = 00mm 66kV = 800mm Open wire conductor configuration depends on regional location - configuration shown is illustrative only. Provide a minimum clearance of 50mm between LVBC suspension or termination clamp and bracket mounting base. Bracket / Luminaire shall be mounted such that they are not contacting other pole top hardware eg, crossarms, arm braces, etc. LED Luminaires are only to be installed on approved brackets. Refer QPLDM for approved brackets. EGX DRWG NO: VOLUME OLDER PGE 8 3-0E

9 ssy Selection or 7 ssy intervals ssy 804- (EE) or ssy 804- (EGX) 300 ssy 805- (EE) ssy 803- ssy CONNECTION TO OPEN WIRE MINS Conductor clearance Refer note CONNECTION TO O/H SERVICE ssy ssy 803- Top Coachscrew ssy 8- ssy Selection 87-3, 7, 9 & to 5,, 3, 3 or 900- & 5 o ssy 804- (EE) or ssy 804- (EGX) ssy 803- Refer note ssy 80-6 ssy m mounting height 300 ssy CONNECTION TO LV BC MINS To ground surface To ground surface Construction Type SLWPB (Bracket) SL (Luminaire) SLED (LED Luminaire) ORIGINL B C 7..3 D E REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 0/0/0 POLE BRCKETS MINOR ROD WOOD POLE.m OUTRECH TYPE MI - CONSTRUCTION EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8 3-0E

10 MTERIL - BRCKET & SUPPLY SSY DESCRIPTION QTY Bracket MI & cable, mounting to wood pole use holder 00 (service) to bracket Cartridge fuse link 3 HRC Saddle (0mm) to wood pole Bracket cable support to x-arm Connector Tap-off bare aluminium mains Connector Tap-off bare copper mains End cap - push on 5mm BC Connector I.P.C. 5/95mm main to 6/35mm tap luminium / 4-35mm Copper Thru Connector ORIGINL B R R R Conduit PVC flexible - 6mm. R MTERIL - LUMINIRE SSY DESCRIPTION QTY Luminaire normal lamp and PE cell S70 C3 H35 H L L x 4W L x 4W L R S70 C Luminaire aeroscreen lamp and PE cell H35 H L7 C D E REERENCE DRWING ENERGEX pproved Ergon pproved Energex REERENCE DRWING ERGON. Zaini Checked BN BN HRD COPY UNCONTROLLED P. Relf /. Bletchly 0/04/7 0/0/0 NOTES: Bracket/Luminaire minimum clearance to conductors:- L.V. = 00mm EE DRWG NO: kv-kv-33kv = 00mm 66kV = 800mm Open wire conductor configuration depends on regional location - configuration shown is illustrative only. Provide a minimum clearance of 50mm between LVBC suspension or termination clamp and bracket mounting base. Bracket / Luminaire shall be mounted such that they are not contacting other pole top hardware eg, crossarms, arm braces, etc. LED Luminaires are only to be installed on approved brackets. Refer QPLDM for approved brackets. POLE BRCKETS MINOR ROD WOOD POLE 3.0m OUTRECH.0m UPLIT TYPE MI - MTERIL EGX DRWG NO: VOLUME OLDER PGE 8 4-0E

11 ssy Selection or 7 ssy intervals ssy 804- (EE) or ssy 804- (EGX) ssy 804- (EE) or ssy 804- (EGX) ssy ssy 805- (EE) ssy ssy ssy ssy 803- Conductor clearance Refer note 300 ssy 803- CONNECTION TO OPEN WIRE MINS CONNECTION TO LV BC MINS CONNECTION TO O/H SERVICE 5 o Top Coachscrew ssy Selection 87-3, 7, 9 & to 5,, 3, 3 or 900- & 7.5m mounting height ssy ssy 80-6 To Ground Surface ssy 80- To Road Surface Construction Type SLWPB (Bracket) SL (Luminaire) SLED (LED Luminaire) ORIGINL B C D E REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 0/0/0 POLE BRCKETS MINOR ROD WOOD POLE 3.0m OUTRECH.0m UPLIT TYPE MI - CONSTRUCTION EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8 4-0E

12 MTERIL - BRCKET & SUPPLY SSY DESCRIPTION QTY 845- Bracket MI3 & cable, mounting to wood pole use holder 00 (service) to bracket Cartridge fuse link 3 HRC Saddle (0mm) to wood pole Bracket cable support to x-arm Connector Tap-off bare aluminium mains Connector Tap-off bare copper mains End cap - push on 5mm BC Connector I.P.C. 5/95mm main to 6/35mm tap luminium / 4-35mm Copper Thru Connector ORIGINL B R R R Conduit PVC flexible - 6mm. R MTERIL - LUMINIRE SSY DESCRIPTION QTY Luminaire normal lamp and PE cell S70 C3 H35 H L L x 4W L R 900- x 4W L S70 C Luminaire aeroscreen lamp and PE cell H35 H L7 C D E REERENCE DRWING ENERGEX pproved Ergon ,. pproved Energex REERENCE DRWING ERGON. Zaini Checked BN BN HRD COPY UNCONTROLLED P. Relf /. Bletchly 0/04/7 0/0/0 NOTES: Bracket/Luminaire minimum clearance to conductors:- L.V. = 00mm EE DRWG NO: kv-kv-33kv = 00mm 66kV = 800mm Open wire conductor configuration depends on regional location - configuration shown is illustrative only. Provide a minimum clearance of 50mm between LVBC suspension or termination clamp and bracket mounting base. Bracket / Luminaire shall be mounted such that they are not contacting other pole top hardware eg, crossarms, arm braces, etc. LED Luminaires are only to be installed on approved brackets. Refer QPLDM for approved brackets. POLE BRCKETS MINOR ROD WOOD POLE 0.5m OUTRECH TYPE MI3 - MTERIL EGX DRWG NO: VOLUME OLDER PGE 8 5-0E

13 ssy Selection or 7 ssy intervals ssy 804- (EE) or ssy 804- (EGX) 300 ssy 805- (EE) ssy 803- ssy CONNECTION TO OPEN WIRE MINS ssy 845- Conductor clearance Refer note ssy Selection 87-3, 7, 9 & to 5,, 3, 3 or 900- & CONNECTION TO O/H SERVICE ssy 804- (EE) or ssy 804- (EGX) ssy ssy 803- Top Coachscrew 5 o ssy 803- Refer note ssy 80-6 ssy m mounting height 300 ssy CONNECTION TO LV BC MINS To ground surface To ground surface Construction Type SLWPB (Bracket) SL (Luminaire) SLED (LED Luminaire) ORIGINL B C D E REERENCE DRWING ENERGEX ,. REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 0/0/0 POLE BRCKETS MINOR ROD WOOD POLE 0.5m OUTRECH TYPE MI3 - CONSTRUCTION EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8 5-0E

14 MTERIL - BRCKET & SUPPLY SSY DESCRIPTION QTY 80- Cartridge fuse link 3 HRC 80-6 use holder 00 (service) to bracket Connector I.P.C. 5/95mm main to 6/35mm TP 6-35 luminium / 4-35mm Copper Thru Connector 805- End cap - push on 5mm BC Bracket MI & cable mounting to wood pole Bracket MI & cable mounting to wood pole Bracket for insulating street light to concrete pole NOTES:. Bracket/Luminaire minimum clearance to conductors:- L.V. = 00mm kv-kv-33kv = 00mm 66kV = 800mm. Ensure a minimum of 50mm clearance is maintained between the concrete pole and fittings and the street light bracket. MTERIL - LUMINIRE SSY DESCRIPTION QTY 87-3 S C3 87- H Luminaire normal lamp and PE cell H L7 3. LED Luminaires are only to be installed on approved brackets. Refer QPLDM for approved brackets L x 4W L 900- x 4W L 87-7 S C Luminaire aeroscreen lamp and PE cell H H L7 R ORIGINL B C D E REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 4/0/0 POLE BRCKETS MINOR ROD CONCRETE POLE.m & 3.0m OUTRECH TYPE MI & MI - MTERIL EE DRWG NO: EGX DRWG NO: VOLUME OLDER PGE 8 6-0E

15 5 o Refer note on assy 836 Top Coachscrew (.m outreach) (3m outreach) To To Ground Ground Surface Surface ssy 804- (EE) or ssy 804- (EGX) ssy 805- (EE) ssy 80-6 ssy 80- ssy 836- Concrete pole NOTE: ll bands to be double wrapped ssy Selection 87-3, 7, 9 & to 5,, 3, 3 ssy Selection or 900- & 8- or (Refer detail B & note ) 7.5m mounting height To Road Surface 0 C L Drill to 85 suit bracket DETIL B DETIL Insulation Drilling Detail (000 x 50 x 00) SL Construction Type SLCPB (Bracket) (Luminaire) ORIGINL B C REERENCE DRWING ENERGEX REERENCE DRWING ERGON BN BN HRD COPY UNCONTROLLED pproved Ergon pproved Energex. Zaini Checked P. Relf /. Bletchly 0/04/7 /0/4 POLE BRCKETS MINOR ROD CONCRETE POLE.m & 3.0m OUTRECH TYPE MI & MI - CONSTRUCTION EE DRWG NO: EGX DRWG NO: SLED (LED Luminaire) VOLUME OLDER PGE 8 6-0C