Nightscape High performance floodlights and spotlights for discharge lamps
|
|
|
- Avice Rogers
- 5 years ago
- Views:
Transcription
1 Nightscape High performance floodlights and spotlights for discharge lamps Nightscape is a range of floodlights and spotlights which offers new possibilities for the architectural illumination of buildings. Wide, medium and narrow beam axially symmetrical and rotationally symmetrical reflectors are available for all wattages. The high IP rating makes them suitable for exterior use and for applications in buildings where dust is a problem. Concept: Roland Jéol Design: Roy Fleetwood Both sizes of housing take double ended discharge lamps. Concentrating on this type of lamp made it possible to design luminares with a very shallow cross section. When installed horizontally on a facade, the luminaires only have a minimal effect on the overall appearance of the building. 14 Nightscape
2 The range of accessories for the Nightscape series includes a particularly strong wall arm. By moving a guiding bar, the direction of the arm can be adjusted 45. Once the required position has been reached, it is fixed by tightening the screw. Nightscape is the result of international cooperation between the lighting consultant Roland Jéol and the architect and industrial designer Roy Fleetwood. Impressive illumination of the new office building of Ströer Out-of-Home Media AG, Cologne. Nightscape A floodlights equipped with red colour filters make the façade stand out at night. Architecture: Fischer + Fischer, Cologne Lighting design: Mailänder Licht Design, Cologne Nightscape 15
3 Nightscape Nightscape A Asymmetrical, wide beam For metal halide lamps (HIT-DE), ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, asymmetrical satin finish aluminium reflector, all exterior steel parts stainless steel, safety glass flush with frame, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral ignitor and LPF ballast, HPF available (see page 196), supplied without lamp Nightscape A, asymmetrical, wide beam C C black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm m 16 m 12 m 8 m 4 m 168 lx 42 lx 19 lx 11 lx 7 lx 5 lx 2 m 4 m 6 m 8 m 12 m 3, 7 m lm , 14 m 17, 21 m 24 m 16 m 12 m 8 m 4 m 348 lx 87 lx 38 lx 22 lx 14 lx 10 lx 3, 7 m 10, 14 m 17, 21 m m 4 m 6 m 8 m 12 m Asymmetrical, wide beam For metal halide lamps (HIT-DE) and ceramic metal halide lamps (HIT-DE-CE) Technical description: see above, asymmetrical, wide beam C C black HIT-DE 250 W Fc kg white HIT-DE-CE 250 W silver grey HIT-DE 250 W lm 39 m 32, m 19, 13 m 6, 216 lx 54 lx 24 lx 13 lx 9 lx 6 lx 3 m 6 m 9 m 12 m m m 6 m 12 m 18 m 24 m 36 m Nightscape HIT-DE HIT-DE-CE HIT-DE HST-DE
4 Accessories for Nightscape floodlights Part number Colour Description black Pole outrigger, for 1 luminaire, white for poles Ø mm silver grey Accessories for Nightscape Accessories for Nightscape floodlights Part number Colour Description black Pole outrigger, for 2 luminaires white for poles Ø mm silver grey Nightscape 17
5 Nightscape C 270 C Axially symmetrical reflectors Axially symmetrical reflectors distribute the light in 2 principal planes: Vertical (C0 180) and horizontal (C 270). The Nightscape range includes reflectors which offer narrow, medium or wide beam distribution in the vertical plane. All reflectors have wide beam distribution in the horizontal plane. Example 1: Axially symmetrical wide beam are mounted close to the facade. Axially symmetrical wide beam reflectors reach large areas of the facade and create uniform illumination. Example 2: Axially symmetrical narrow and medium beam As the distance from the facade increases, the light distribution needs to be more precisely directed. Axially symmetrical narrow or medium beam reflectors are used to achieve a sufficiently high luminous intensity. Example 3: Axially symmetrical narrow beam Horizontal features on a façade are to be uniformly illuminated. Axially symmetrical narrow beam floodlights produce linear light distribution which can be projected accurately onto a horizontal surface. Example 4: Axially symmetrical narrow beam The floodlights are mounted on a facade in order to provide uniform illumination. Axially symmetrical narrow beam reflectors produce an intensive band of light. The light shines parallel to the facade (wall washing). 18 Nightscape
6 Rotationally symmetrical reflectors The light distribution of rotationally symmetrical reflectors is the same in all planes. Therefore the beam angle in one plane is sufficient to describe the characteristics of a reflector. C 270 C Nightscape Example 1: Rotationally symmetrical medium or wide beam Rotationally symmetrical medium or wide beam reflectors are suitable for the uniform illumination of symmetrical surfaces, e.g. circular or square signs. Example 2: Rotationally symmetrical medium or wide beam In situations where vertical surfaces, e.g. banners, along a facade are to be illuminated, rotationally symmetrical medium or wide beam floodlights should be used as they create a uniform light cone. The uniformity can be increased by mounting the floodlight on an arm. Example 3: Rotationally symmetrical narrow beam A facade detail is to be accentuated from a long distance. Rotationally symmetrical narrow beam spotlights are used to project light of high intensity over greater distances. Example 4: Rotationally symmetrical narrow beam The luminaires are to be mounted on a facade to provide accent lighting. Rotationally symmetrical narrow beam reflectors create intensive bands of light along the facade and thus highlight the architectural features. Nightscape 19
7 Nightscape A Nightscape A For compact fluorescent lamps (TC-L) die cast aluminium housing, polyester powder coated, axially symmetrical high gloss aluminium reflector, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral starter and LPF ballast, supplied without lamp Nightscape A Part number* Colour Lamp Lampholder Weight Beam angle C C black 3 x TC-L 18 W 2G kg white silver grey TC-L 18 W 3750 lm ,4 m 13,7 m 10,9 m 8,2 m 5, 2,7 m 2,7 m 5, 4 m 8,1 m 10,8 m 13, 16,2 m 187 lx 47 lx 21 lx 12 lx 7 lx 5 lx 1 m 2 m 3 m 4 m 6 m *Can also be supplied with electronic ballast. 20 Nightscape A TC-L
8 Nightscape A Axially symmetrical For metal halide lamps (HIT-DE), ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, axially symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral ignitor and LPF ballast, HPF available upon request (see page 196), supplied without lamp Nightscape A HIT-DE-CE 70 W 6500 lm ,4 m 22,0 m 17,6 m 13,2 m 8,8 m 4,4 m 0,8 m 1, 2,3 m 3, 1 m 3,8 m 4,6 m 541 lx 135 lx lx 34 lx 22 lx 15 lx 3 m 6 m 9 m 12 m 18 m lm ,1 m 36,7 m 29,4 m 22,0 m 14,7 m 7,3 m 1,3 m 2, 6 m 3,8 m 5, 1 m 6,4 m 7,7 m 405 lx 101 lx 45 lx 25 lx 16 lx 11 lx Nightscape A, axially symmetrical, narrow beam C C black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm , 22,1 m 17,7 m 13,3 m 8,8 m 4,4 m 1,2 m 2, 3,7 m 5, 0 m 6,2 m 7, 399 lx 100 lx 44 lx 25 lx 16 lx 11 lx 3 m 6 m 9 m 12 m 18 m lm 26, 22,1 m ,7 m 13,3 m 8,8 m 4,4 m 8 lx 207 lx 92 lx 52 lx 33 lx 23 lx 3 m 6 m 9 m 12 m 18 m 1,2 m 2, 3,7 m 5, 0 m 6,2 m 7, Nightscape A, axially symmetrical, medium wide beam C C black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm 28,3 m 23,6 m ,9 m 14,2 m 9,4 m 4,7 m 251 lx 63 lx 28 lx 16 lx 10 lx 7 lx 3 m 6 m 9 m 12 m 18 m 2,2 m 4, 3 m lm 6, 8, 6 m 10,8m 13,0 m 28,3 m 23,6 m ,9 m 14,2 m 9,4 m 4,7 m 521 lx 1 lx 58 lx 33 lx 21 lx 14 lx 3 m 6 m 9 m 12 m 18 m 2,2 m 4, 3 m 6, 8,6 m 10,8 m 13,0 m Nightscape A, axially symmetrical, wide beam C C black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE HIT-DE-CE HST-DE Nightscape A 21
9 Nightscape A Nightscape A Rotationally symmetrical For metal halide lamps (HIT-DE), ceramic metal halide lamps (HIT-DE-CE) and high pressure sodium lamp (HST-DE) die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral ignitor and LPF ballast, HPF available upon request (see page 196), supplied without lamp Nightscape A, rotationally symmetrical, narrow beam black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm Ø 1, Ø 3,1 m 482 lx 121 lx lm Ø 4,6 m 54 lx Ø 9,2 m Ø 6,2 m lx Ø 12,3 m Ø 7,7 m 19 lx Ø 15,4 m Ø 6,2 m Ø 3,1 m 250 lx 63 lx 28 lx 16 lx 10 lx m 80 m 100 m Nightscape A, rotationally symmetrical, medium wide beam black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm Ø 1,8 m Ø 3,6 m 554 lx 139 lx lm Ø 5,4 m 62 lx Ø 10,8 m Ø 7,2 m 35 lx Ø 14,4 m Ø 9 m 22 lx Ø 18 m Ø 7,2 m Ø 3,6 m 288 lx 72 lx 32 lx 18 lx 12 lx Nightscape A, rotationally symmetrical, wide beam black HIT-DE 70 W Rx7s 6.0 kg white HIT-DE-CE 70 W silver grey HST-DE 70 W black HIT-DE 150 W Rx7s 6.5 kg white silver grey HST-DE 150 W HIT-DE-CE 70 W 6500 lm Ø 2, Ø 399 lx 100 lx 3 m 6 m lm Ø 7, 44 lx 9 m Ø 12,4 m Ø 9,9 m 25 lx 12 m Ø 16,6 m Ø 12,4 m 16 lx Ø 20,7 m Ø 8,3 m Ø 4,1 m 299 lx 75 lx 33 lx 19 lx 12 lx 22 Nightscape A HIT-DE HIT-DE-CE HST-DE
10 For compact fluorescent lamps (TC-L) die cast aluminium housing, polyester powder coated, axially symmetrical high gloss aluminium reflector, all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range120, M20 cable gland, possibility for through wiring, integral starter and LPF ballast, HPF available upon request (see page 196), supplied without lamp TC-L 18 W 5000 lm ,8 m 15,7 m 12,6 m 9,4 m 6,3 m 3,1 m 2,9 m 5, 7 m 8,6 m 11,4 m 14,3 m 17,1 m 186 lx 46 lx 21 lx 12 lx 7 lx 5 lx 1 m 2 m 3 m 4 m 6 m Part number* Colour Lamp Lampholder Weight Beam angle C C black 4 x TC-L 18 W 2G kg white silver grey *Can also be supplied with electronic ballast. The screws used to close the fitting are integrated into the hinges. Depending on the installation, the frame can be opened to either side to gain access to the inside of the luminaire. TC-L 23
11 , 250 W Axially symmetrical For metal halide lamps (HIT-DE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, axially symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral ignitor and LPF ballast, HPF available upon request (see page 196), supplied without lamp, axially symmetrical, narrow beam C C black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey HIT-DE 250 W lm ,9 m 36,6 m 29,3 m 22,0 m 14,6 m 7,3 m 1,3 m 2, 3,8 m 5, 1 m 6,3 m 7,6 m 541 lx 135 lx lx 34 lx 22 lx 15 lx HST-DE 250 W lm ,9 m 36,6 m 29,3 m 22,0 m 14,6 m 7,3 m 6 lx 1,3 m 2, 173 lx 3,8 m 77 lx 5, 1 m 43 lx 6,3 m 28 lx 7,6 m 19 lx , axially symmetrical, medium wide beam C C black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey HIT-DE 250W lm , 35,4 m 28,3 m 21,2 m 14,2 m 7,1 m 2, 5, 0 m 7, 10,0 m 12,6m 15,1 m 407 lx 102 lx 45 lx 25 lx 16 lx 11 lx HST-DE 250 W lm 44,2 m 36,9 m , 22,1 m 14,7 m 7,4 m 564 lx 141 lx 63 lx 35 lx 23 lx 16 lx 2,1 m 4, 1 m 6,2 m 8, 3 m 10,4m 12,4 m , axially symmetrical, wide beam C C black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey HIT-DE 250W lm 25,3 m 21,1 m ,9 m 12,7 m 8,4 m 4,2 m 721 lx 180 lx 80 lx 45 lx 29 lx 20 lx 3 m 6 m 9 m 12 m 18 m 2,7 m HST-DE 250 W lm 2,7 m 5, 4 m 5, 4 m 8,2 m 8,2 m 10,9 m 13,6m 16,3 m 25,3 m 21,1 m ,9 m 12,7 m 8,4 m 4,2 m 919 lx 2 lx 102 lx 57 lx 37 lx 26 lx 10,9 m 13,6 m 16,3 m m 6 m 9 m 12 m 18 m 24 HIT-DE HST-DE
12 , 250 W Rotationally symmetrical For metal halide lamps (HIT-DE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, rotationally symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, integral ignitor and LPF ballast, HPF available upon request (see page 196), supplied without lamp HIT-DE 250 W lm Ø 3,4 m 258 lx HST-DE 250 W lm Ø 6,7 m 64 lx Ø 10,1 m 29 lx m Ø 10,1 m Ø 13,4 m 16 lx 80 m Ø 13,4 m Ø 16,8 m 10 lx 100 m Ø 16,8 m, rotationally symmetrical, narrow beam black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey Ø 6,7 m Ø 3,4 m 328 lx 82 lx 36 lx 21 lx 13 lx m 80 m 100 m HIT-DE 250 W lm Ø 3,7 m 318 lx HST-DE 250 W lm Ø 7, 79 lx Ø 11,2 m 35 lx Ø 20 lx Ø 19,8 m Ø 18,7 m 13 lx Ø 24,7 m, rotationally symmetrical, medium wide beam black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey Ø 14,8 m Ø 9,9 m Ø 4,9 m 281 lx 70 lx 31 lx 18 lx 11 lx HIT-DE 250 W lm Ø 3,2 m Ø 6,3 m 687 lx 172 lx HST-DE 250 W lm Ø 9, 76 lx Ø 12,7 m 43 lx Ø 15,8 m Ø 15,9 m 27 lx Ø 19,7 m, rotationally symmetrical, wide beam black HIT-DE 250 W Fc kg white silver grey black HST-DE 250 W Fc kg white silver grey Ø 11,8 m Ø 7,9 m Ø 3,9 m 1 lx 150 lx 67 lx 38 lx 24 lx HIT-DE HST-DE 25
13 , 400 W Axially symmetrical For metal halide lamps (HIT-DE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, axially symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, separate ballast required, integral ignitor, LPF and HPF ballasts available (see page 196), supplied without lamp, axially symmetrical, narrow beam C C black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey HIT-DE 400 W 0 lm ,6 m 7,3 m 1,3 m 22,0 m 2, 29,3 m 3,8 m 36,6 m 5, 1 m 43,9 m 6,3 m 7,6 m 974 lx 244 lx 108 lx 61 lx 39 lx 27 lx HST-DE 400 W lm ,3 m 14,6 m 325 lx 2, 43,9 m 5, 1 m 81 lx 58,6 m 7,6 m 36 lx 73,2 m 10,1 m 20 lx 87,8 m 12,6m 13 lx 15,2 m 9 lx m, axially symmetrical, medium wide beam C C black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey HIT-DE 400 W 0 lm ,1 m 826 lx 14,2 m 2,2 m HST-DE 400 W lm ,7 m 266 lx 21,2 m 4, 4 m 207 lx 29, 4,1 m 44,2 m 8, 3 m 66 lx 28,3 m 6, 92 lx 59,0 m 12,4 m lx 35,4 m 8, 7 m 52 lx 42, 73,7 m 16,6 m 17 lx 10,9m 33 lx 88, 20,7m 11 lx 13,1 m 23 lx 24,9 m 7 lx m, axially symmetrical, wide beam C C black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey HIT-DE 400 W 0 lm ,1 m 504 lx 14,1 m 4,3 m HST-DE 400 W lm ,0 m 623 lx 21,2 m 8, 6 m 126 lx 14,1 m 4, 21,1 m 9, 1 m 156 lx 28,2 m 12,9 m 56 lx 28,1 m 13,6 m 69 lx 35,3 m 17,1 m 32 lx 42,3 m 35,1 m 18,1 m 39 lx 21,4 m 20 lx 42,2 m 22,7 m 25 lx 25,7 m 14 lx 27,2 m 17 lx HIT-DE HST-DE
14 , 400 W Rotationally symmetrical For metal halide lamps (HIT-DE) and high pressure sodium lamps (HST-DE) die cast aluminium housing, polyester powder coated, axially symmetrical aluminium reflector (high gloss or satin finish), all exterior steel parts are stainless steel, tempered safety glass, silicon gasket, closure with 4 stainless steel screws, hinged frame, mounting bracket powder coated aluminium with tilt scale: 6 drilled holes Ø 8.m, spacing 70 mm (1m, 200 mm), 1 centre hole Ø 22 mm, tilt range 120, M20 cable gland, possibility for through wiring, separate ballast required, integral ignitor, LPF and HPF ballasts available (see page 196), supplied without lamp HIT-DE 400 W 0 lm Ø 2,7 m Ø 5,3 m 780 lx 195 lx HST-DE 400 W lm Ø 8 m 87 lx m Ø 9 m Ø 10,6 m 49 lx 80 m Ø 12 m Ø 13,3 m 31 lx 100 m Ø, rotationally symmetrical, narrow beam black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey Ø 6 m Ø 3 m 1 lx 75 lx 33 lx 19 lx 12 lx m 80 m 100 m HIT-DE 400 W 0 lm Ø 3,7 m Ø 7, 572 lx 143 lx HST-DE 400 W lm Ø 11,2 m 64 lx Ø 36 lx Ø 19,8 m Ø 18,7 m 23 lx Ø 24,7 m, rotationally symmetrical, medium wide beam black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey Ø 14,8 m Ø 9,9 m Ø 4,9 m 5 lx 132 lx 59 lx 33 lx 21 lx HIT-DE 400 W 0 lm Ø 6,3 m 9 lx HST-DE 400 W lm Ø 12,7 m 77 lx Ø 19 m 34 lx Ø 25,4 m 19 lx Ø 31, Ø 31,7 m 12 lx Ø 39,4 m, rotationally symmetrical, wide beam black HIT-DE 400 W Fc2 7.5 kg white silver grey black HST-DE 400 W Fc2 7.5 kg white silver grey Ø 23,6 m Ø 15,8 m Ø 7,9 m 283 lx 71 lx 31 lx 18 lx 11 lx HIT-DE HST-DE 27
15 Accessories Nightscape Accessories Nightscape A/B Part number Colour Description black Wall arm, 0 mm white adjustable aluminium profile silver grey with 1 sliding suspension rod Nightscape A/B Part number Colour Description black Wall arm, 18m white adjustable aluminium profile silver grey with 2 sliding suspension rods Design: Roy Fleetwood Accessories Nightscape A/B Part number Colour Description black Single pole mount arm, white aluminium, silver grey for pole Ø mm Accessories Nightscape A/B Part number Colour Description black Double pole mount arm, white aluminium, silver grey for pole Ø mm Accessories Nightscape A/B Part number Colour Description black Pole top fitter, aluminium, polyester powder white coated, for pole Ø 76 mm with M20 thread, silver grey for mounting one floodlight black Pole top fitter, aluminium, polyester powder white coated, for pole Ø 89 mm with M20 thread, silver grey for mounting one floodlight Accessories, 400 W Part number Colour Power factor Description black LPF Remote ballast unit white LPF for HIT-DE/HST-DE 400 W silver grey LPF IP black HPF white HPF silver grey HPF 28 Nightscape
16 Accessories Nightscape A Part number Part number Colour Description black Cowl white c/w frame silver grey Nightscape A Part number Part number Colour Description black Protection grill white c/w frame silver grey Accessories Nightscape Nightscape A Part number Part number Colour Description black Vertical louvre white c/w frame silver grey black Horizontal louvre white c/w frame silver grey Nightscape A Part number Part number Colour Description black Radial louvre white c/w frame silver grey Nightscape A Part number Part number Colour Description black Green colour filter white c/w frame silver grey black Blue colour filter white c/w frame silver grey black Red colour filter white c/w frame silver grey black Yellow colour filter white c/w frame silver grey For use on spotlights with rotationally symmetrical narrow beam reflectors only black Ribbed glass white for vertical beam silver grey c/w frame black Ribbed glass white for horizontal beam silver grey c/w frame The frames can carry a special glass plus another accessory. They can therefore also be ordered individually. Accessories such as louvres and special glasses are fitted into a supporting frame which is screwed onto the front of the floodlight. A special glass plus another accessory can be fitted into one frame. Nightscape A Part number Part number Colour Description yellow Filter blue red green For use on spotlights with rotationally symmetrical narrow beam reflectors only Ribbed glass for vertical beam Ribbed glass for horizontal beam Nightscape 29
Ecospot LED floodlights
Ecospot LED floodlights Design: Roy Fleetwood Ecospot is a floodlight series which was designed specifically for LEDs. They offer extremely narrow beam light distribution with very little scattered light
Ecospot LED floodlights
Ecospot LED floodlights Design: Roy Fleetwood Ecospot is a floodlight series which was designed specifically for LEDs. They offer extremely narrow beam light distribution with very little scattered light
MACH 3 D10,5 D10,5 D10,5. Light as star
11 116 335 379 MACH 3 246 6 6 D1,5 D1,5 D1,5 Light as star The Mach 3 floodlight has been designed to offer the ultimate in technical prowess, especially with regard to new, high-performing sources of
Ceiling-recessed downlights for metal halide lamps and LEDs
for metal halide lamps and LEDs The range of ceiling mount recessed downlights for miniature metal halide lamps and LEDs is characterised by extremely compact dimensions and a high degree of flexibility.
Superlight Compact Nano
Willy Meyer+Sohn GmbH+Co. KG Stemmessiepener Weg 5 D-58675 Hemer Telephone: +49 (0) 23 72/98 91-0 Telefax: +49 (0) 23 72/98 91-48 E-mail: info@meyer-lighting.com www.meyer-lighting.com 258 00 530-1011
Gizmo, gizmo mini, gizmo micro and gizmo nano LED, metal halide and halogen CSA listed wet label IP65 suitable for up or down aiming with Light Lock
Gizmo, gizmo mini, gizmo micro and gizmo nano LED, metal halide and halogen CSA listed wet label IP65 suitable for up or down aiming with Light Lock designplan MEYER LIGHTING GMMN 1/10 5 Zollverein Park,
Light as emotion MACH 2
118 16 284 328 MACH 2 22 6 6 D1,5 D1,5 D1,5 Light as emotion The Mach 2 floodlight stands out for its versatile, cutting edge structure. It is addressed to a whole range of uses, especially for indoor
Ecoscape LED area and street lighting luminaires
LED area and street lighting luminaires is a range of exterior LED luminaires for the illumination of open spaces, streets and paths. They are available in two sizes for various different optical systems.
Lumena 400 and 600 Floodlights for streets and squares
Lumena 400 and 600 Floodlights for streets and squares Light and slender appearance, sturdy and functional design these are the typical characteristics of the Lumena floodlights. But not the only ones.
4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22)
.6 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 / FZD EN (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial
4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22)
.7 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation
GENERAL ALUMINIUM FLOODLIGHT For general area lighting
GUARDIAN CAST ALLOY FLOODLIGHT High Efficiency asymmetric floodlight, incorporating 400W metal halide or sodium Designed and manufactured to comply with EN 60598 and is CE certified. 434 167 lamps. SON:
C O N T R A S T NORTH STAR LIGHTING INC. A R C H I T E C T U R A L F L O O D L I G H T S E R I E S
C O N T R A S T A R C H I T E C T U R A L F L O O D L I G H T S E R I E S T h e w i d e s t p o s s i b l e r a n g e o f a r c h i t e c t u r a l f l o o d l i g h t s Versatility - For the first time,
Beam Type Lamp Type Gear Type. Rated Input Power
1/9 Description IP66, Class I. IK07. Marine-grade die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG Controlled Compression Gasket. Safety glass lens. PMMA-LED
FLC131 LED + Linear spread lens IO
1/9 Description IP66, Class I. IK07. Marine-grade die-cast aluminium alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG Controlled Compression Gasket. Safety glass lens. PMMA-LED
Industrial luminaires
Industrial luminaires acciaio When rapidity is money......you install 4 fittings in the time of 1 Industrial luminaires T5 and T8 Material: body: in zinc steel painted color: gray Degree of protection:
264 urban lighting VIGILA
264 urban lighting 265 STRUcture FITTING FOR URBAN LIGHTING APPLICATION. POST-TOP VERSION FOR CYLINDRICAL SECTION POLES. aluminium BODY. FRAME OPENING THROUGH FOUR FAST RELEASE HOOKS PLACED ON THE UPPER
Industrial luminaires
Industrial luminaires Acciaio 112 Leader BS 101 114 Leader BS 103 3G 115 Leader BS 111 116 Leader BS 113 117 Leader 21-01, 21-04 118 BS100, BS110 119 Tores 23-01 120 Castor 25-05 121 Lumino 26-91 122 Leo
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01 Page LED Outdoor Commercial Lighting Venus LED Bulkhead...1-2 Vesta LED Bulkhead...3-4 Jupiter LED Bulkhead...5-6 Cube LED Bulkhead...7-8 LED Up-Down
T U N N E L A N D U N D E R P A S S LIGHTING
T U N N E L A N D U N D E R P A S S LIGHTING Indoor Indoor Tunnelite TGX220 Tunnel luminaire suitable for use with 18-58W TL-D lamps. Tunnelite TGX220 Type Features Light source Lamp included Gear Optic
BRUDA. Removable control gear plate. Computer aided design reflector. Single piece high-pressure diecast aluminium housing.
, designed specifically to allow for tool free maintenance is a single piece high pressure die cast area light. High output computer designed reflector with a removable control gear plate. is equipped
Platea. Features. Platea system
Platea design P. Castiglioni - M. Cucinella Features 03 IP66 IK08 Direct light luminaire for use with metal halide, sodium vapour, halogen, fluorescent lamps and LEDs. The fixture is installed into the
CONTENTS PCFL 20 ASYMMETRIC... G1 PCFL 2000DS SYMMETRIC... G2 PCFL 2000DA ASYMMETRIC... G3 PCFL 2000JDA ASYMMETRIC.. G4 PCFL 420NB NARROW BEAM...
CONTENTS PCFL 20 ASYMMETRIC... G1 PCFL 2000DS SYMMETRIC... G2 PCFL 2000DA ASYMMETRIC... G3 PCFL 2000JDA ASYMMETRIC.. G4 PCFL 420NB NARROW BEAM... G5 PCFL 420WB WIDE BEAM... G6 PCFL 20 ASYMMETRIC FLOODLIGHT
ROOF. design: Laura Andreini
526 / 527 ROOF design: Laura Andreini ROOF recessed Body Light sources Power supply Components Sheet steel body with anodized sheet aluminium reflector with smooth or ribbed finish. TC-D, TC-DE compact
SOURCE TE- Electronic MH. OPTIONS See Below OPTIONS. L = Lamped BLANK = General Purpose Optics A = Asymmetric Optics S = Spot
CATALOG NO. TYPE NO. JOB NAME -8 GP Flood Series Floodlighting GP (Mini) ORDERING INFORMATION Catalog Number: Example: GPA070TEL GP A TE SERIES GP-General Purpose Flood SIZE -Mini ACCESSORIES GPGS = Visor
ETC330-FS LED
1/7 Description IP67, Class I. IK10+. Stainless steel construction including PCS hardware. Safety glass lens, max. load 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket. Factory-sealed
4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22)
.5 Ex Floodlights for high-pressure discharge lamps, series PX 0 and FLT 10 (Zone 1, 2, 21, 22) The powerful floodlights for harsh environments Thanks to the high degree of protection IP66, the robust
seattle The Seattle floodlight luminaire combines applications 10.1 seattle Area floodlighting Building facades Car parks Security Service yards
10.1 seattle applications Area floodlighting Building facades Car parks Security Service yards Sports facilities Retail parks The Seattle floodlight luminaire combines functionality with style. Its contemporary
Compact. Walk over.
118 Compact Walk over In-ground fitting that keeps mm recessing depth independently from the models. It assures high precision in the optical control and homogenous light distribution on the facade. Even
seattle The Seattle floodlight luminaire combines applications 10.1 seattle Area floodlighting Building facades Car parks Security Service yards
10.1 seattle applications Area floodlighting Building facades Car parks Security Service yards Sports facilities Retail parks The Seattle floodlight luminaire combines functionality with style. Its contemporary
ISTHAR 66 LED ISTHAR 88 LED ISTHAR 110 LED
ISTHAR LED ISTHAR LED ISTHAR LED is a range of IP66 surface-mounted luminaires made of extruded aluminium for LED light sources. Available in three different power options, each has a specific length:
SunLuce Adjustable projector
Design Fabio Reggiani The essential and elegant nature of Sunios has been developed further in, a more compact projector but with many more versions. In, control gear and optical compartment are separated
Asia Pacific Edition Inground Luminaires General Catalogue Architectural Lighting WE-EF LEUCHTEN
Asia Pacific Edition 2006-2009 Inground Luminaires General Catalogue Architectural Lighting WE-EF LEUCHTEN INGROUND LUMINAIRES 17 HIGHLIGHTS 18 EFC120 20 LED ETC110/120 [B]/[M] 30 ESC130/140 [B] 48 EFC120
Smooth Wall effect and pole mounted. Design K.Begasse.
34 Design K.Begasse Smooth Wall effect and pole mounted Smooth is the summary of both technical and aesthetic expressions taken to the extreme. The proportions, the absence of sharp edges, the smooth and
WALKIE CAR. design: Martini Staff
150 / 151 WALKIE CAR design: Martini Staff WALKIE CAR 230/300 recessed drive-over Walkie Car 230 Walkie Car 300 Body Light sources Emissions Colours floor-recessed luminaire, die-cast aluminium body and
The Denver Pole Mount luminaire with its attractive
1.3 denver pole applications Landscaped areas Car parks Amenity areas Retail parks Entrance roads Pedestrian areas The Denver Pole Mount luminaire with its attractive contemporary styling and exceptional
Control Spot. Control Spot. 1.5m. Housing White Silver. Reflectors Order in addition to Housing
BESTSELLERLIST Control Spot Control Spot High output for 70w and 150w CMI-T (G12) lamps Lightweight electronic gear Reflectors provide beam options from 15º-40º 191 CMI-T/HIT-CE 70/150w G12 order separately
Indoor high bay. Industrial and Commercial High Bays
YES 1 TECH YES 1 TECH/S Indoor high bay YES 1 TECH-Safe YES 1 TECH/S-Safe 105 The Body made of zinc plated steel coated with polyester powders in silver colour Ral 7035, wired power corrected. For power
CONTENTS. Golf 65 wall LED. Rio wall led p.94 p.96 p.97. yeti LED. Arosa LED p.100. Pacer led p.98. fusion LED p.99 SECTION 04 : WALL LIGHTS
CONTENTS yeti Golf 65 wall Rio wall led p.94 p.96 p.97 SECTON 04 : WALL LGHTS Pacer led p.98 fusion p.99 Arosa p.100 93 SECTON 04 : WALL LGHTS suspended / surface mounted YET An innovative high powered
Floodlight Series 6521/4
> The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight
Clyde I. Recessed / Wall. Features: Applications:
Clyde I Recessed / Wall 10 Flat small square/round 2W LED wall recessed light fixture. Asymmetric pinhole aperture throws bright band of light at to wash surfaces. The high intensity of the single power
floodlighting - index
floodlighting - index AM5000 A versatile range of floodlights available with 3 beam distributions, including a flat glass version with a beam emergence of 60 Suitable for all general purpose exterior floodlighting
INDUSTRIAL LIGHTING TAURIS MODEL NUMBER F220 TAURIS 2 MODULE F221 TAURIS 3 MODULE F222 TAURIS 4 MODULE SPECIFICATIONS HOUSING : LM 6 die cast aluminium and extruded aluminium. LIGHT SOURCE : The fitting
T9 Exterior Range. p64. n CALDERA. p65. n BOCA JUNIOR. p66. n BOCA. p67. n ESEDRA. p68. n LITEPK. p69. n FL1. p70. n BOL. p71.
T9 n CALDERA n BOCA JUNIOR n BOCA n ESEDRA n LITEPK n FL1 n BOL n BOL STAINLESS p64 p65 p66 p67 p68 p69 p70 p71 63 CODE: CALDERA A discrete IP65 luminaire capable of up and down illumination. Black drypowder
Compact corrosion resistant, weather proof IP 65 flood light with integral gear tray for use with 70W HPS, 70W/150W HQI and 80W MBF lamps.
AZAR LAMP COMPARTMENT CORROSION RESISTANT, WEATHER PROOF COMPACT FLOODLIGHT RANGE Compact corrosion resistant, weather proof flood light with integral gear tray for use with 70W HPS, 70W/150W HQI and 80W
SCAN WITH. Download the free Layar App. Scan this page
TARGA targa SCAN WITH Download the free Layar App Scan this page The front finish of the luminaire can be customized to better merge into the architectural setting. Visit get.layar.com and download the
WE-EF LIGHTING USA Floodlights FLC200 LED Series 2017
WE-EF LIGHTING USA Floodlights FLC200 LED Series 2017 Design and Engineering The most important element in the design process is the development of luminaires that encompass timeless design; in other
TUBE. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles.
TUBE TUBE TUBE family is available in 4 different sizes. They are protected from the ingress of dust and water and are used in both outdoor and indoor environments. Operating with PAR, Compact Fluorescent,
Arc IP 66 IP 66 IK 08 IK 09 Class I Class II (SIP) (DIP ) (Glass) (Bowl)
IP 66 IP 66 IK 08 IK 09 Class I Class II (SIP) (DIP ) (Glass) (Bowl) Complete and multi-functional range in a modern timeless design and with highly valued concepts like Double Ingress Protection (DIP),
Contrast 2 LED. Performance Compactness Complete flexibility NEW
NEW Contrast 2 LED High light output in a compact and discreet design with a wide choice of light effects created using different light distributions and accessories Performance Compactness Complete flexibility
ZIP DOWNLIGHT.
ZIP DOWNLIGHT www.simes.it/zip-downlight 249 MICROZIP STAINLESS-STEEL FRONT TRIM DOWNLIGHT Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Marine grade stainless steel
SAPPHIRE 1 SAPPHIRE 2 SAPPHIRE 3
SAPPHIRE 1 SAPPHIRE 2 SAPPHIRE 3 ADVANTAGES Sealsafe IP 66 maintained over time Innovative, high-performance photometry Easilok locking mechanism (Sapphire 1 and 2) Easy maintenance Adjustable inclination
I-BRICK. High quality LED from Samsung. Curve shaped design. Vandal proof protective cover. Visual comfort. Available in 2 sizes.
I-BRICK is a range of wall recessed luminaires with LED and compact fluorescent light sources. The glare-free cover enables I-BRICK to be installed in most places where a comfortable illumination is needed.
Lutera 100. Individual lighting accents from the ground.
Lutera 100 ndividual lighting accents from the ground. The Lutera ground-recessed spotlight sets architecture in scene with striking light accents and can be flexibly used thanks to two construction sizes
RONDO-01 TECHNICAL SHEET. Outdoor architectural projector. About the product RONDO-01-80W, RONDO-01-35W, RONDO-01-20W, RONDO-01-70W
No. 99 / 08.01.2014, Edition No. 10, 1/5 Outdoor architectural projector RONDO-01 RONDO-01-80W, RONDO-01-35W, RONDO-01-20W, RONDO-01-70W About the product The projector RONDO-01 is designed for architectural
parkpack For rugged, vandal resistant security lighting, inside applications 19.1 parkpack Multi-storey car parks Open car parks Precincts
19.1 parkpack applications Multi-storey car parks Open car parks Precincts Amenity areas Walkways Residential areas Roads For rugged, vandal resistant security lighting, inside or out, Parkpack cannot
Light Up. Light Blade* Adjustable. Light Blade* Diffuser. Floor Washer* Wall Washer. Diffuser. ø 80 ø 250. ø 50 ø 200. ø 28 ø 144
Light Up Orbit Earth Fixed Fixed Light Blade* Adjustable Diffuser Light Blade* Floor Washer* Wall Washer Diffuser ø 80 ø 250 ø 50 ø 200 ø 28 ø 144 * Only for ø 80 and ø 50 * Only for ø 144 550 products.iguzzini.com/light_up_line
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
VESPER-LED IP Application: outdoor areas, main and side roads of the cities and villages, parking and industrial areas.
VESPER-LED IP 65 pplication: outdoor areas, main and side roads of the cities and villages, parking and industrial areas. allast: EP electronic 220-240 V/50-60 Hz ody: luminium die cast housing Optical
We provide you with solutions
NEWS 2005 We provide you with solutions Professional solutions mean more than good design and products which are technically good. They mean being party to a process and contributing practical solutions
RING - FLAT.
104 RING - FLAT www.simes.it/ring 105 MICRORING-MICROFLAT DRIVE-OVER Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Marine grade stainless steel AISI 316L 3 mm thick
IP 66 IK 08 Class I Class II
IP 66 IK 08 Class I Class II The classic T-shape design makes Osiris a particulary decorative lantern. Due to the well balanced light technical sollutions, a wide range of applications can be achieved.
SPECIFICATION - PLAZA 10, 20, 35
SPECIFICATION - PLAZA 0, 20, 35 A COMPACT, SURFACE MOUNTED ARCHITECTURAL FLOODLIGHT 08mm 28mm 72mm 8mm 28mm 08mm 46mm PRODUCT FEATURES Minimalistic Design: Minimal in its design PLAZA is designed to blend
Futura Urban decorative lighting
59 60 reduces light pollution. The evolution of a classic. In the 1980 s, the well-known industrial designer ndré Ricard surprised us again with a new concept in exterior luminaire design. The.C.L series,
Battens & special purpose
& special purpose are the simple, inexpensive lighting solution for applications where aesthetics and luminance control are not critical. 107 7 Pentura TMS 122 Pentura TMS 122 TMS 122 TMS 122/228 TMS 122/228
Floodlights. An extensive suite of general purpose, area and high performance sports floodlights. Floodlights
262 Floodlights Floodlights An extensive suite of general purpose, area and high performance sports floodlights. Floodlights 263 264 Floodlights Force 266 Briteline Elite 278/281 Elio 267 Mini Marine 282
Tempo compact and consistent
Lighting Tempo compact and consistent Tempo 2 RVP251 Tempo is a complete floodlighting range offering a wide choice of lamp types and symmetrical and asymmetrical reflectors. It is designed for general-purpose
Outdoor Light fittings
Outdoor Light fittings SCHUCH Outdoor Light fittings NEW Description Series Page Technical outdoor luminaires With multi-purpose mounting system 43 136 NEW 43 FG 137 53 139 44 140 44 F 142 NEW 44 FG 142
urban lighting DELOS
228 urban lighting 229 STRUCTURE SERIES AVAILABLE IN TWO DIMENSIONS FOR APPLICATIONS FROM 5m TO 10m. UPPER JOINT CONSISTING OF An ALUMINIUM HUB Ø 65mm. AVAILABLE MOUNTING SYSTEM FOR INSTALLATION ON An
Under Water Luminaire NHG 10. Under Water Luminaire NHG 10. Flood Lighting. Flood Lighting NHG Flood Lighting. Technical Data.
Flood lighting Lighting should perfectly illuminate the sports players, it should never disturb them or be uncomfortable for the live spectators. Many years of experience have enabled Philips engineers
ipro design Mario Cucinella products.iguzzini.com/ipro_line medium 155 large 192 Ecosustainable house in Salento - Salve, Italy
ipro design Mario Cucinella micro 51 mini 81 small medium large Ecosustainable house in Salento - Salve, Italy Architectural and lighting project: Massimo Iosa Ghini Photo: Cosmo Laera 509 ipro micro /
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01
INDEX PAGE WHERE LIGHT CREATES COLOUR SERIES, EDITION 01 Page LED Roadway Lighting Atlas Basic LED Roadway...1-2 ROADWAY LIGHTING Atlas LED Roadway...3-4 Atlas Evo LED Roadway I...5-6 Atlas Evo LED Roadway
D02 egeo/n2. ing. castaldi illuminazione
12 egeo/n2 is a floodlight of great reliability, a classical in the design history, suitable for both outdoor and indoor applications in the illumination of architectural sites. Supported by a large choice
FOCUS.
FOCUS www.simes.it/focus 267 NANOFOCUS Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance. Clear toughened glass 3 mm thick. Stainless steel screws. Silicone gaskets. Double
ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
Thorn GLORIE X38W TC-DD LO AC WHI [STD] / Luminaire Data Sheet
![Thorn GLORIE X38W TC-DD LO AC WHI [STD] / Luminaire Data Sheet](/thumbs/96/129233057.jpg "Thorn GLORIE X38W TC-DD LO AC WHI [STD] / Luminaire Data Sheet")
Thorn 96 100 728 GLORIE 505034 1X38W TC-DD LO AC WHI [STD] / Luminaire Data Sheet 40 60 30 15 0 15 30 24% Luminaire classification according to CIE: 95 CIE flux code: 44 72 90 95 25 A shallow ceiling mounted
road lighting - index
road lighting - index AM600 A range of high performance general road lanterns for road lighting applications. Ideal for either side entry or post top mounting. Designed for roadlighting installations to
Tempo compact and consistent
ing Tempo compact and consistent Tempo 3 RVP351 Tempo is a complete floodlighting range offering a wide choice of lamp types and symmetrical and asymmetrical reflectors. It is designed for general-purpose
Lighting the world around you. Architectural Exterior Lighting 2018/19. Supplement
Lighting the world around you Architectural Exterior Lighting 2018/19 Supplement The Cube family offers a versatile solution for lighting designers and architects. The design is a study in clean lines
LED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
ETC310-FS LED
1/6 Description IP67. IK10+. Stainless steel construction including PCS hardware. Safety glass lens with opal diffuser, max. load 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket.
Nordland Lighting HAZARDOUS, INDUSTRIAL AND COMMERCIAL LIGHTING SINCE 1967
Nordland Lighting HAZARDOUS, INDUSTRIAL AND COMMERCIAL LIGHTING SINCE 1967 Hazardous, Industrial and commercial lighting manufacturers Nordland Lighting, based in Muldersdrift, Gauteng, South Africa started
Sistema Easy. Sistema Easy MH page 115. ø 212. Sistema Easy FL page 117. Sistema Easy FL page 117. ø 212. ø 250. design Maurizio Varratta
Sistema Easy design Maurizio Varratta Sistema Easy MH page 115 General light Wall Washer Sistema Easy FL page 117 Sistema Easy FL page 117 General light General light ø 250 114 products.iguzzini.com/sistema_easy_line
Floodlights. XL-LED Performance IP66 Mini Floodlights 58 LED Weatherproof Floodlights 60
XL-LED Performance IP66 Mini 58 LED Weatherproof 60 The LED Technology XL-LED IP66 Mini Floodlight The Crompton XL-LED IP66 Floodlight has been uniquely developed and engineered to incorporate the latest
PALADINE ROUND ROUND BULKHEADS For protected area lighting
130 PALADINE ROUND ROUND BULKHEADS For protected area lighting 130 IP65 surface mounted luminaire constructed of die cast aluminium housing and front end grille with UV stabilised polycarbonate vandal
A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S
T A B L E O F C O N T E N T S A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S LLF755 - Low Level Flood with Anti-Glare Faceplate C1.1 LLF800 - Low Level Flood with Anti-Glare Faceplate
lights and gypsum units from one source.
Schmitz-Leuchten GmbH & Co. KG P.O.Box 24 60 D-59714 Arnsberg Niedereimerfeld 29 D-59823 Arnsberg Tel. +49(0)29 32. 96 77. 0 Fax +49(0)29 32. 96 77. 77 itz@schmitz-leuchten.de www.schmitz-leuchten.de Luminaires
Project. Luminaire Schedule. Engineer. Issuing Office EDEN PROJECT GREEN BUILD HUB ELECTRICAL PARTICULAR SPECIFICATION LUMINAIRE SCHEDULE
Project Eden Project Green Build Hub Luminaire Schedule Engineer Issuing Office Michael Jay & Jason Tetlow Plymouth X:\Central File\03-07579-Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\0307579-4B-Luminaire
S/H/MPC SERIES S/H/MPC SERIES. City Beautification. City Beautification. City Beautification. Technical Data
City beautification It s about improving the quality of life, the appearance, feeling and atmosphere of where people live, work and play. It s about introducing aesthetics in the lighting of our streets
Lighting for petrol stations
Lighting for petrol stations Making your brand sparkle Safety first guidance and accident prevention With petrol stations often being in isolated locations and having money-handling areas in the open,
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
Airtrace IP 66 IP 66 IK 09 Class I Class II
IP 66 IP 66 IK 09 Class I Class II (SIP) (DIP) A highly aesthetic state-ofthe-art design is combined with proven functionality, including high performance micro-optics. Its two sizes and a serie of exclusively
1000W and 2000W versions
503 FLOODLIGHT 126 600W HPS 1000W and 2000W versions The 503 is a high powered floodlight with a wide ambient temperature range. The high upper ambient and corrosion resistant aluminium constriction, make
Replacement. Metal Halide OB150S. Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle
LED BULB OB150S 35W FEATURES LED replacement for 70~100 W Metal Halide Lamp Energy Saving up to 65% than conventional lighting Improved efficiency of 130 lm/w 2 years standard warranty Ultra-light and
V ista Grande complements the original Vista
2.19 vista grande applications Car parks Amenity areas Town squares Retail parks V ista Grande complements the original Vista luminaire, combining a sleek contemporary design with exceptional technical
Overall Dimensions. Specifications
Overall Dimensions EFX B EFX VM Vertical Mount C 13 housing (70-400W) 19 housing (450-1000W) E D H B C D E 13.3 16.8 16.2 7.0 9.8 (33.78cm) (42.67cm) (41.15cm) (17.78cm) (24.89cm) F G H I J 22.2 11.3 6.3
Online. Surface linears. Fitting: Can be fitted as individual modules or in continuous lines or other structures. Requires accessories, not included.
IN Surface linears 7.4 Online Online is a range of fluorescent luminaires for surface mounting or hanging. They are designed to form continuous lines or other structures, or to be installed as single modules.
Industrial LED lighting ENERGY SAVING
www.disano.it Industrial lighting ENERGY SAVING 2 Industrial lighting Echo Led The best of the technology applied to a product that has been a leader in the market for years thanks to the exceptional quality
SELECTION
SELECTION 2018 1 APPLICATIONS supermarkets warehouses workshops corridors cloakroom staircases garages SUR surface mounted installation LIGHT SOURCES T5 linear fluorescent lamp LED ECG electronic control
Norwich Hostry Norwich. 14 Downlights & Spotlights
Norwich Hostry Norwich 14 Downlights & Spotlights RXS LED RXS is the all new high performance specification downlight to complement the ground breaking RXD LED range and highly successful Solstar CFL family.