NOVEMBER 2017 PRICING GUIDE - ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE

Transcription

1 NOVEMBER 2017 PRICING GUIDE - ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE

2 CS1 STANDARD CASE LIGHT WEIGHT TRANSMISSIONS (1" GEAR SETS) DESCRIPTION RACER 2-SPEED ONLY 3, SPEED ADD-ON SECTION 3, SPEED AND REVERSE 4, SPEED AND REVERSE w/shifter ($300.00) 4, SPEED ONLY 5, SPEED AND REVERSE 6, SPEED AND REVERSE w/shifter ($410.00) 7, SPEED ONLY 8, SPEED AND REVERSE 8, SPEED AND REVERSE w/shifter ($520.00) 9, SPEED 5-SPEED AND REVERSE OPTIONS: TITANIUM PLANET CASE (QUOTE DAY OF ORDER) (PER SECTION) ADD REVERSE LOCKOUT ADD FORM SPRAGS (PER SECTION) ADD NEUTRAL SAFETY SWITCH ADD SPRAG REPLACEMENT MODULE ADD NOTE: ALL TRANSMISSIONS COME WITH THE FOLLOWING: LIGHT WEIGHT COMPONENTS THROUGHOUT (EXCEPT RING GEARS) LOW DRAG ANGULAR CONTACT AND NEEDLE BEARINGS CHOICE OF RATIO AIR SERVO OR MAX-ADJUST SHIFT TOWERS CHOICE FOR OUTPUT LENGTH AND SPLINE (16 OR 32) NEUTRAL IF REQUESTED INPUT SHAFT THROWOUT BEARING COLLAR (4 SPEED ONLY)

3 CS1N LARGE CASE COMPOUND PLANETARY TRANSMISSION DESCRIPTION RACER 2-SPEED ONLY 3, SPEED AND REVERSE 4, SPEED ONLY 6, SPEED AND REVERSE 7, SPEED ONLY 8, OPTIONS: SHIFTER ADD REVERSE LOCKOUT ONLY ADD FORM SPRAGS (PER SECTION) ADD MARAGING SHAFTS ADD SPRAG REPLACEMENT MODULE ADD RATIOS AVAILABLE: *1.27 * * NOTE: * AVAILABLE/NOT IN INVENTORY NOTE: ALL TRANSMISSIONS COME WITH THE FOLLOWING: STANDARD COMPONENTS LOW DRAG (ANGULAR CONTACT AND NEEDLE BEARINGS) CHOICE OF RATIO AIR SERVO OR MAX-ADJUST SHIFT TOWER INPUT SHAFT CHOICE OF OUTPUT LENGTH AND SPLINE (16, 32 OR 35)

4 CS2 BIG CASE NEW GENERATION TRANSMISSIONS (3/4" GEAR SETS) DESCRIPTION RACER 2-SPEED ONLY 3, SPEED ADD-ON SECTION 3, SPEED AND REVERSE 4, SPEED AND REVERSE w/shifter ($300.00) 4, SPEED ONLY 5, SPEED AND REVERSE 6, SPEED AND REVERSE w/shifter ($410.00) 7, SPEED ONLY 8, SPEED AND REVERSE 8, SPEED AND REVERSE w/shifter ($520.00) 9, SPEED ONLY 9, SPEED AND REVERSE 9, SPEED AND REVERSE w/shifter ($630.00) 10, OPTIONS: FORM SPRAGS (PER SECTION) ADD TITANIUM PLANET CASE (QUOTE DAY OF ORDER) (PER SECTION) ADD. REVERSE LOCKOUT ONLY ADD NEUTRAL SAFETY SWITCH ADD SPRAG REPLACEMENT MODULE ADD NOTE: ALL TRANSMISSIONS COME WITH THE FOLLOWING: LIGHT WEIGHT COMPONENTS LIGHT WEIGHT RING GEARS (UNITS w/27 AND 32 SPLINE SHAFTS ONLY) LOW DRAG (ANGLUAR CONTACT AND NEEDLE BEARINGS) CHOICE OF RATIO CHOICE OF STANDARD OR NEW GENERATION REVERSES AIR SERVOS OR MAX-ADJUST SHIFT TOWERS INPUT SHAFT THROWOUT BEARING COLLAR (4 & 5-SPEED ONLY) SHIFTERS AND LOCKOUTS CAN BE EITHER STYLE

5 CS3 SMALL CASE NEW GENERATION TRANSMISSIONS (1/2" GEAR SETS) CS4 SMALL CASE NEW GENERATION TRANSMISSIONS (5/8" GEAR SETS) DESCRIPTION RACER 2-SPEED ONLY 3, SPEED ADD-ON SECTION 2, SPEED AND REVERSE 4, SPEED AND REVERSE w/shifter ($300.00) 4, SPEED ONLY 5, SPEED AND REVERSE 6, SPEED AND REVERSE w/shifter ($410.00) 7, SPEED ONLY 7, SPEED AND REVERSE 8, SPEED AND REVERSE w/shifter ($510.00) 9, SPEED ONLY 9, SPEED AND REVERSE 10, SPEED AND REVERSE w/shifter ($630.00) 10, OPTIONS: TITANIUM PLANET CASES...ADD (PER SECTION)(QUOTE DAY OF ORDER). REVERSE LOCKOUT ONLY ADD NEUTRAL SAFETY SWITCH ADD FORM SPRAGS (PER SECTION) ADD SPRAG REPLACEMENT MODULE ADD NOTE: ALL TRANSMISSIONS COME WITH THE FOLLOWING: LIGHT WEIGHT COMPONENTS LIGHT WEIGHT RING GEARS (UNITS w/27 AND 32 SPLINE SHAFTS ONLY) LOW DRAG (ANGULAR CONTACT AND NEEDLE BEARINGS) CHOICE OF RATIO NEW GENERATION REVERSE w/neutral AIR SERVOS OR MAX-ADJUST SHIFT TOWERS INPUT SHAFT THROWOUT BEARING COLLAR (4 & 5 SPEED ONLY) CHOICE OF SHIFTER STYLE AND LOCKOUT STYLE

6 ST-1200 STREET/STRIP TRANSMISSION (3/4" GEAR SETS) DESCRIPTION RACER 4-SPEED AND REVERSE w/shifter 5, SPEED AND REVERSE w/shifter 6, SPEED AND REVERSE w/shifter 7, OPTION: ANGULAR CONTACT BEARINGS (PER SECTION) ADD $ NON-REFUNDABLE DEPOSIT TO START TRANSMISSION; BALANCE DUE WHEN COMPLETED NOTE: ALL TRANSMISSIONS COME WITH THE FOLLOWING: CHOICE OF RATIO AND FRONT ADAPTER ALUMINUM CASES /4" PLANETARY ASSEMBLIES LARGE SPRAGS REVERSE w/neutral 16 OR 32 SPLINE OUTPUT CHOICE OF SHIFTER STYLE AND POSITION INPUT SHAFT YOKE THROWOUT BEARING COLLAR

7 LENCODRIVE TRANSMISSION DESCRIPTION RACER 2-SPEED AND REVERSE 8, SPEED AND REVERSE 10, SPEED AND REVERSE 12, DRIVE ONLY SECTION 5, OPTIONS: RACER MANUAL SHIFTER (2 SPEED) WITH NEUTRAL SAFETY SWITC ADD MANUAL SHIFTER (3 SPEED) WITH NEUTRAL SAFETY SWITC ADD MANUAL SHIFTER (4 SPEED) WITH NEUTRAL SAFETY SWITC ADD LOCKOUT SHIFTER WITH NEUTRAL SAFETY SWITCH ADD FORMSPRAGS ADD ACCESSORIES: MC VENT KIT MC TRANS-BRAKE BUTTON MC NEUTRAL SAFETY SWITCH MC TRANSMISSION RELAY SWITCH NOTE: ALL LENCODRIVES COME WITH THE FOLLOWING (LESS CONVERTER): ~ AIR SERVO OR MAX-ADJUST SHIFT TOWER AND LEVER ~ CHOICE OF OUTPUT SHAFT LENGTH AND SPLINE ~ REVERSE LEVER

8 BOAT CLUTCH DESCRIPTION RACER BOAT CLUTCH, SMALL CLUTCH PACK 1, BOAT CLUTCH, LARGE CLUTCH PACK 2, BOAT CLUTCH, SMALL ADD-ON 1, BOAT CLUTCH, LARGE ADD-ON 1, BOAT CLUTCH, LARGE TOP FUEL 25-PACK (300-M SHAFTS) 2, BOAT CLUTCH, LARGE TOP FUEL 25-PACK (MARAGING SHAFTS) 3, BOAT CLUTCH / CS1 OR CS2 2-SPEED TRANSMISSIONS DESCRIPTION RACER BOAT CLUTCH, SMALL & 2-SPEED TRANS WITH SINGLE SPRAG ASSY 5, BOAT CLUTCH, SMALL & 2-SPEED TRANS WITH DUAL SPRAG ASSY 5, BOAT CLUTCH, SMALL & 2-SPEED TRANS WITH SPRAG REPLACEMENT 6, BOAT CLUTCH, LARGE & 2-SPEED TRANS WITH SINGLE SPRAG ASSY 5, BOAT CLUTCH, LARGE & 2-SPEED TRANS WITH DUAL SPRAG ASSY 5, BOAT CLUTCH, LARGE & 2-SPEED TRANS WITH SPRAG REPLACEMENT 6, BOAT CLUTCH / CS1 OR CS2 3-SPEED TRANSMISSIONS DESCRIPTION RACER BOAT CLUTCH, SMALL & 3-SPEED TRANS WITH SINGLE SPRAG ASSY 7, BOAT CLUTCH, LARGE & 3-SPEED TRANS WITH SINGLE SPRAG ASSY 7,635.00

9 BOAT CLUTCH / CS3 TRANSMISSIONS DESCRIPTION RACER BOAT CLUTCH, SMALL & 2-SPEED TRANS WITH SINGLE SPRAG ASSY 4, BOAT CLUTCH, SMALL & 3-SPEED TRANS WITH SINGLE SPRAG ASSY 7, NOTE: ALL UNITS (w/transmissions) COME WITH M-50 SPRAGS FORMSPRAG UPGRADE (PER ADDITIONAL SPRAG) NOTE: BOAT CLUTCH COMES IN TWO DIFFERENT STYLES: SMALL: COMES w/the SMALL BLUE CLUTCHES (5.5" DIA.) LARGE: COMES w/the LARGE BLUE CLUTCHES (6.75" DIA.) THE LARGE IS RECOMMENDED FOR BLOWN ALCOHOL OR TOP FUEL BOATS AND ALL HEAVY DUTY APPLICATIONS. NOTE: ALL UNITS COME WITH THE FOLLOWING: INPUT SHAFT LOW DRAG ANGULAR CONTACT & NEEDLE BEARING CHOICE OF RATIO AIR SERVOS OR MAX ADJUST SHIFT TOWERS CHOICE OF OUTPUT SPLINE (16 OR 32) & LENGTH SPRAG REPLACEMENT MODULE LID ASSEMBLY - BOAT ONLY DESCRIPTION RACER CS-1 ASSEMBLY (INCLUDES SUN GEAR) 1, CS-2 OR CS-3 ASSEMBLY 1, NOTE: SPRAG REPLACEMENT MODULE UNITS INCLUDE OUTPUT SHAFT, REAR LID, BEARING, SMR, LINES, FITTINGS AND VALVING.

10 16/32-SPLINE REVERSE DESCRIPTION RACER TRANSMISSION STYLE ADD-ON (CS1/CS2/CS3) 1, HIGH GEAR ADAPTER (ALUMIN /32-SPLINE) 2, HIGH GEAR ADAPTER (MAGNESIUM). MONSTER TRUCK ADD-ON (CS1 ONLY) 2, NOTE: 16/32-SPLINE REVERSES COME WITH THE FOLLOWING: MAGNESIUM CASE 300M SHAFTS INPUT SHAFT CHOICE OF OUTPUT SHAFT LENGTH (NO CHARGE) REVERSE LEVER

11 40-SPLINE HIGH GEAR REVERSE DESCRIPTION RACER STANDARD OUTPUT, ALUMINUM ADAPTER (300M SHAFTS) 3, LONG OUTPUT, ALUMINUM ADAPTER (300M SHAFTS) 3, STANDARD OUTPUT, MAGNESIUM ADAPTER (300M SHAFTS). LONG OUTPUT, MAGNESIUM ADAPTER (300M SHAFTS). STANDARD OUTPUT, CANNON STYLE (MA SHAFTS). LONG OUTPUT, CANNON STYLE (MA SHAFTS). OPTION: LESS INPUT SHAFT SUBTRACT NOTE: 40-SPLINE REVERSES COME WITH THE FOLLOWING: INPUT SHAFT REVERSE LEVER FRONT RETAINER AND SEAL (CANNON STYLE ONLY)

12 GEAR REDUCTION DESCRIPTION RACER GEAR REDUCTION ONLY 2, GEAR REDUCTION AND REVERSE 3, GEAR REDUCTION ADD-ON 2, NOTE: ALL UNITS COME WITH THE FOLLOWING: MAGNESIUM CASE 16 OR 32-SPLINE OUTPUT INPUT SHAFT

13 BILLET 9310 STARTER GEARS DESCRIPTION RACER STARTER GEAR QUANTITY: QUANTITY: QUANTITY: QUANTITY: QUANTITY: 500 OR MORE NOTE: QUANTITIES OVER 100 PIECES AND ALL SPECIAL ORDER GEARS, PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.

14 MARAGING SHAFTS (AVAILABLE IN 300 & 350) DESCRIPTION ALL SPECIAL ORDER / QUOTED UPON ORDER RACER. NOTE: ALL SHAFTS ARE CUSTOM AND ARE NOT RETURNABLE OR EXCHANGEABLE

15 FULL FLOATER REAR END ASSEMBLIES DESCRIPTION RACER FULL FLOATER REAR END ASSEMBLY 5, FULL FLOATER REAR END ASSEMBLY (LESS THIRD MEMBER) 3, FULL FLOATER KIT w/spindles & 35 OR 40 SPLINE AXLES (LESS CALIPERS, HOUSING & THIRD MEMBER) 2, OPTIONS: FABRICATED HOUSING ADD. MARAGING AXLES ADD 1, RIFLE DRILLED AXLES ADD MAGNESIUM HOUSING ADD CARBON FIBER ROTORS ADD NOTE: FULL FLOATER REAR END ASSEMBLY COMES COMPLETE WITH: MODIFIED STANDARD HOUSING w/fabricated BRACE & COVER FILL AND DRAIN PLUGS BILLET SPINDLES ALUMINUM OR NODULAR CENTER w/billet CAPS CHOICE OF RATIO (9310 PRO GEAR) 35 OR 40 SPLINE LIGHT WEIGHT SPOOL 300M AXLES MAGNESIUM OR BILLET ALUMINUM FLOATER HUBS (w/11/16" STUDS) NUTS AND WASHERS CALIPERS w/light WEIGHT BRAKE ROTORS YOUR CHOICE OF COUPLER OR YOKE

16 FLOATER AXLES DESCRIPTION RACER LENCO FLOATER AXLE, 35-SPLINE (300M) LENCO FLOATER AXLE, 40-SPLINE (300M) LENCO FLOATER AXLE, 35-SPLINE (MARAGING) 1, LENCO FLOATER AXLE, 40-SPLINE (MARAGING) 1, STRANGE OR SUMMERS FLOATER AXLE, 35-SPLINE (300M) STRANGE OR SUMMERS FLOATER AXLE, 40-SPLINE (300M) STRANGE OR SUMMERS FLOATER AXLE, 35-SPLINE (MARAGING) 1, STRANGE OR SUMMERS FLOATER AXLE, 40-SPLINE (MARAGING) 1, OPTIONS: RIFLE DRILLING ADD NOTE: PRICES ARE FOR HOUSINGS UP TO 38" WHEEL FLANGE TO WHEEL FLANGE, WIDER HOUSINGS PRICES ON REQUEST. NOTE: STRANGE OR SUMMERS TYPE AXLES LENGTHS MUST BE VARIFIED BY CUSTOMER. THESE ARE SPECIAL ITEMS AND ARE NOT RETURNABLE.

17 LENCO SHIFTER - NEW STYLE (HEX-TYPE) PART NO. DESCRIPTION RACER CS1 REVERSE LOCK-OUT ONLY CS1 2-SPEED AND REVERSE CS1 3-SPEED AND REVERSE CS1 4-SPEED AND REVERSE CS1 5-SPEED AND REVERSE 1, CS2 REVERSE LOCK-OUT ONLY CS2 2-SPEED AND REVERSE CS2 3-SPEED AND REVERSE CS2 4-SPEED AND REVERSE CS2 5-SPEED AND REVERSE 1, CS3 REVERSE LOCK-OUT ONLY CS3 2-SPEED AND REVERSE CS3 3-SPEED AND REVERSE CS3 4-SPEED AND REVERSE CS3 5-SPEED AND REVERSE 1, NEUTRAL SAFETY SWITCH ADD NOTE: FORWARD, MID, OR REAR MOUNT ALL THE SAME PRICE NEUTRAL SAFETY SWITCH MANDATORY ON SHIFTERS BEING USED ON A LENCODRIVE!

18 AP LENCO T-SHIRT, MEDIUM AP LENCO T-SHIRT, LARGE AP LENCO T-SHIRT, EXTRA LARGE AP LENCO T-SHIRT, DOUBLE X AP LENCO T-SHIRT, TRIPLE X AP LENCO T-SHIRT, FOUR X AP LENCO HAT AP LENCO APRON AP LENCO SWEATSHIRT, SMALL AP LENCO SWEATSHIRT, MEDIUM AP LENCO SWEATSHIRT, LARGE AP LENCO SWEATSHIRT, EXTRA LARGE AP LENCO SWEATSHIRT, DOUBLE X AP LENCO SWEATSHIRT, TRIPLE X AP LENCO PATCHES N/C

19 AS SCALE, ST AS SCALE, BRASS 0 TO 50# DISC. AS DEGREE FITTING, 1/8" PIPE (BRASS) 6.00 AS STRAIGHT FITTING, 1/8" PIPE (BRASS) 3.00 AS T-FITTING, 1/8" PIPE (BRASS) AS T-FITTING, 1/8" PIPE (PLASTIC) AS PLASTIC AIRLINE, 1/8" PIPE (PER FOOT) 2.00 AS DEGREE FITTING, 1/4" PIPE (PLASTIC) 7.00 AS STRAIGHT FITTING, 1/4" PIPE (PLASTIC) 5.00 AS AIR LINE SHIFT KIT, 2-SPEED (CS1/CS2/CS3/LD) AS AIR LINE SHIFT KIT, 3-SPEED (CS1/CS2/CS3/LD) AS AIR LINE SHIFT KIT, 4-SPEED (CS1/CS2/CS3/LD) AS AIR LINE SHIFT KIT, 5-SPEED (CS1/CS2/CS3/LD) AS C02 RELAY KIT AS AIR SHIFTER VALVE BODY AS AIR SHIFTER VALVE PISTON AS CLIPPARD VALVES AS AIR SHIFTER VALVE DETENT BALL 1.00 AS SPRING, SHIFT DETENT 5.00 AS AIR SHIFTER VALVE KNOB AS AIR SHIFTER VALVE ASSEMBLY AS AIR SERVO BODY (DISCONTINUED) AS AIR SERVO BODY WITH JET OUTLET AS AIR SERVO BODY, TALL (DISCONTINUED) AS AIR SERVO PISTON (DISCONTINUED) AS AIR SERVO PISTON TOP AS AIR SERVO PISTON SHAFT AS AIR SERVO COVER AS AIR SERVO PISTON ASSEMBLY AS AIR SERVO ASSEMBLY AS AIR BOTTLE BRACKET, LARGE (EACH) 65.00

20 AS AIR BOTTLE BRACKET, SMALL (EACH) AS AIR REGULATOR TUBE & NUT AS AIR REGULATOR PLUNGER AS AIR REGULATOR, 250# w/liquid FILLED GAUGES AS AIR REGULATOR, 250# NO GAUGES AS AIR REGULATOR, 125# w/liiquid FILLED GAUGES AS AIR REGULATOR, 125# NO GAUGES AS AIR REGULATOR, 150# w/liquid FILLED GAUGES AS AIR REGULATOR, 150# NO GAUGES AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM, AS AIR REGULATOR SHIM KIT (10-SHIMS) AS CO2 BOTTLE TOPS (DISC) DISC. AS AIR BOTTLE BURST CAP, LARGE (DISC) AS AIR BOTTLE BURST PANEL, SMALL (DISC) 8.00 AS CO2 BOTTLE, 10 OZ AS CO2 VALVE BODY 10 OZ AS CO2 BOTTLE, 2.5lb AS CO2 VALVE BODY, 2.5lb AS CO2 PLASTIC SEAL 2.00 AS REGULATOR GAUGE H/P, 1/4" PIPE AS REGULATOR GAUGE H/P, 1/4" PIPE (LIQUID FILLED) AS REGULATOR GAUGE L/P, 1/4" PIPE AS REGULATOR GAUGE L/P, 1/4" PIPE (LIQUID FILLED) AS REGULATOR GAUGE L/P, 1/8" PIPE AS REGULATOR GAUGE L/P, 1/8" PIPE (LIQUID FILLED) AS REGULATOR GAUGE H/P, 1/8" PIPE 17.00

21 AS REGULATOR GAUGE H/P, 1/8" PIPE (LIQUID FILLED) AS AIR SERVO BODY, LARGE (DISCONTINUED) DISC. AS AIR SERVO PISTON TOP, LARGE AS AIR SERVO PISTON SHAFT, SMALL AS AIR SERVO PISTON SHAFT, LARGE 2-PC AS AIR SERVO COVER, LARGE AS AIR SERVO COVER, w/boss & 1/8" PIPE AS AIR SERVO COVER, w/boss & 1/4" PIPE AS AIR SERVO PISTON ASSEMBLY (N.G.) AS AIR SERVO PISTON ASSEMBLY, LARGE (N.G.) AS AIR SERVO ASSEMBLY, SMALL (N.G.) AS AIR SERVO ASSEMBLY, LARGE (N.G.) AS AIR SERVO BODY, LARGE (2-PC) TOP BODY END AS AIR SERVO BODY, LARGE (2-PC) BOTTOM THREAD END AS AIR SERVO LOCKING ACTUATOR LID, SMALL AS AIR SERVO LOCKING ACTUATOR LID, LARGE AS AIR SERVO LOCKING ACTUATOR LID CHECK VALVE AS AIR SERVO LOCKING ACTUATOR LID PLUNGER PIN AS AIR SERVO LOCKING ACTUATOR LID PLUNGER BODY AS AIR SERVO LOCKING ACTUATOR LID ASSEMBLY, SMALL AS AIR SERVO LOCKING ACTUATOR LID ASSEMBLY, LARGE AS AIR SERVO REMOTE RELEASE SYSTEM (CS1, CS2, CS3, CS4) AS AIR REGULATOR MANIFOLD, 2-PORT AS AIR REGULATOR MANIFOLD, 3-PORT AS AIR REGULATOR, 100 PSI, SMR AS AIR VALVE ASSEMBLY, SPRAGLESS, SMR AS SHIFT VALVE PISTON, SMR AX PLUG, 40 AXLE 15.00

22 BE BELLHOUSING CROSS SHAFT BE BELLHOUSING CROSS SHAFT CLAMP BE BELLHOUSING CROSS SHAFT LEVER BE BELLHOUSING CROSS SHAFT FORKS BE BELLHOUSING, 7.200" TURBO-400 (LENCODRIVE) (DISC) (DISC) BE BELLHOUSING, 7.375" LONG (LENCODRIVE) (DISC) (DISC)

23 BG RACE, 35-SPLINE SPOOL BEARING (DISC) (DISC) BG BEARING, 35-SPLINE SPOOL (DISC) (DISC) BG BUSHING, SHIFT PLUNGER BG SHIFT PLUNGER ROLLER ASSEMBLY BG BEARING, B BG BEARING, B BG BUSHING, BOAT CLUTCH 6.00 BG BEARING, 31-SPLINE SPOOL (DISC) (DISC) BG RACE, 31-SPLINE SPOOL BEARING (DISC) (DISC) BG BEARING AND RACE ASSEMBLY, 31-SPLINE (DISC) (DISC) BG PILOT THRUST BEARING, (ALL HG REVERSERS) 5.00 BG THROWOUT BEARING BG CHEVY PILOT BEARING ASSEMBLY(SB & BB) BG PILOT BEARING BG SLEEVE, CHEVY BEARING BG SLEEVE, FORD BIG-BLOCK PILOT BEARING BG SLEEVE, FORD SMALL-BLOCK PILOT BEARING BG FORD BIG-BLOCK PILOT BEARING ASSEMBLY BG FORD SMALL-BLOCK PILOT BEARING ASSEMBLY BG ROLLER PLATE ROLLER ASSEMBLY BG BUSHING, ROLLER PLATE ROLLER BG BEARING, PINION SUPPORT (6-SPLINE) (DISC) (DISC) BG BEARING, FRONT PINION SUPPORT (STOCK) (DISC) (DISC) BG RACE, FRONT PINION SUPPORT (DISC) (DISC) BG RACE, LARGE REAR PINION SUPPORT BG RACE, SMALL REAR PINION SUPPORT BG BEARING, LARGE REAR PINION SUPPORT BG BEARING, SMALL REAR PINION SUPPORT BG TAIL BEARING RETAINER (DISC) (DISC) BG PINION TAIL BEARING (DISC) (DISC) BG BEARING, 35-SPLINE FRONT PINION 35.00

24 BG BEARING, FUEL PUMP OVERDRIVE SPUR GEAR BG BEARING, FUEL PUMP OVERDRIVE RING GEAR BG BEARING, HIGH GEAR SHAFT BELLHOUSING BG BEARING, 1-3/8" SEALED (REAR LID) BG BEARING, 1-3/8" SEALED w/snap RING (REV. FRONT / REAR LID) BG BUSHING, STANDARD SHAFT 6.00 BG CASE BEARING, LOW-DRAG BG CASE BEARING, STANDARD BG PLANETARY THRUST BEARING 7.00 BG BEARING, 3/4" PLANETARY BG BEARING, 5/8" PLANETARY BG BEARING, 1/2" PLANETARY 8.00 BG BEARING, SUN GEAR THRUST (CS-1 & NG 32-SPLINE PLANETARY) 9.00 BG BEARING, SUN GEAR SUPPORT BG BEARING, 40 SPLINE H/G REV. PLANETARY THRUST BG BEARING (STANDARD), PRESSURE PLATE & ST1200 CASE BG BEARING (LOW-DRAG), PRESSURE PLATE & NG CASE BG BEARING, SEALED (2 SPEED LID) BG BEARING, 1-3/8" REVERSE FRONT BG BEARING, REV RING GEAR / L-DRIVE SAFETY SPRAG THRUST 8.00 BG BEARING, REVERSE LID BG BEARING, 35-SPLINE REAR LID SEALED BG BEARING, 35-SPLINE REAR LID SEALED w/snap RING BG BEARING, 35-SPLINE DOUBLE ROW w/snap RING BG BUSHING, BOAT SHAFT 6.00 BG BEARING, FLOATER HUB BG RADIAL PLATE BEARING (3NBF512YJ) BG BEARING, 3/8" PILOT BG BEARING, SHAFT PILOT BG BEARING, NG PLANETARY & 35-SPLINE REVERSE THRUST 9.00 BG BEARING, 3/4"-PIN (1/2" GEAR SET) 10.00

25 BG BEARING, 5/8"-PIN (1/2" GEAR SET) 9.00 BG BEARING, NG SUN GEAR THRUST (27-SPLINE PLANETARY) 6.00 BG BEARING, 15.87MM-PIN (1/2" GEAR SET) BG BEARING,.472" (68% & 73% 1" GEAR SETS) BG BEARING, 20MM-PIN (1/2" GEAR SET) BG BEARING, 40-SPLINE REVERSE PLANETARY THRUST BG BEARING, 40-SPLINE REVERSE FRONT BG BEARING, 40-SPLINE REVERSE FRONT, LARGE BG BEARING, 40-SPLINE REVERSE LID (w/snap RING) BG BEARING, 40-SPLINE REVERSE LID (NO SNAP RING) BG BEARING, 32-SPLINE LOW-DRAG REVERSE THRUST BG BEARING, CLUTCH HUB THRUST BG BEARING, 18MM-PIN (3/4" GEAR SET) BG BUSHING, PUMP HOUSING (LENCODRIVE) N/A BG BUSHING, C-6 PUMP 7.00 BG BUSHING, TURBO-400 PUMP 6.00 BG BEARING, OUTER SAFETY SPRAG RACE THRUST BG BEARING, FRONT SIDE INNER SPRAG RACE SMALL CAGE THRUST BG BEARING, INPUT SHAFT/SAFETY SPRAG OUTER RACE BG BEARING, REAR OUTER SPRAG RACE LARGE CAGED THRUST BG BEARING, FRONT PLATE BG BEARING, STATOR SUPPORT (C-6 ONLY) BG BEARING, MEGA FRONT PLATE SUPPORT BG BEARING, CARRIER SMR BG BEARING, B-65 (ST1200 & CS-3 RADIAL PLATE) BG BEARING INNER RACE (ST1200 & CS-3 RADIAL PLATE) 6.00 BG BEARING OUTER RACE (ST1200 & CS-3 RADIAL PLATE) 8.00 BG BEARING ASSEMBLY, (ST1200 & CS-3 RADIAL PLATE) (DISC) 24.00

26 BK BLANKET, 2 SPEED (CS-1) BK BLANKET, 2 SPEED w/reverse (CS-1) BK BLANKET, 3 SPEED w/reverse (CS-1) BK BLANKET, 4 SPEED w/reverse (CS-1) BK BLANKET, GEAR REDUCTION w/reverse BK BLANKET, HIGH GEAR REVERSE (CS-2) BK BLANKET, 3 SPEED w/reverse (CS-2) BK BLANKET, 4 SPEED w/reverse (CS-2) BK BLANKET, 5 SPEED w/reverse (CS-2) BK BLANKET, 3 SPEED w/reverse (CS-3) BK BLANKET, 4 SPEED w/reverse (CS-3) BK BLANKET, 5 SPEED w/reverse (CS-3) BK BLANKET, SPECIAL ONLY

27 BL BOLT, 1/4-20 X 1" SHIFT TOWER SHOULDER 3.60 BL FHCS, 1/4-20 X 3/8" (LENCO LOCKER HOUSING) 0.75 BL FHCS, 1/4-20 X 3/4" (REAR LID BRG. RET. / AIR SERVO PISTON SHAFT) 0.75 BL FHCS, 1/4-20 X 1" (N.G. THROW-OUT BEARING COLLAR) 0.75 BL FHCS, 1/4-28 X 1/2" (LARGE 2-PC. AIR SERVO BASE) 0.75 BL FHCS, 5/16-18 X 3/4" (N.G. LOW-DRAG REVERSE PLANET CARRIER) 0.75 BL FHCS, 5/16-18 X 1" (EARLY STYLE ADAPTOR RING) 0.75 BL FHCS, 5/16-18 X 1-1/4" (EARLY STYLE ADAPTER RING) 1.00 BL FHCS, 5/16-24 X 1" (EARLY STYLE ADAPTER RING) 0.75 BL FHCS, 5/16-24 X 1-1/4" (EARLY STYLE ADAPTER RING) 1.00 BL FHCS, 3/8-16 X 1-1/4" (HIGH-GEAR REVERSE ADAPTER) 1.00 BL FHCS, 3/8-16 X 1-1/2" (HIGH-GEAR REVERSE ADAPTER) 1.00 BL FHCS, 3/8-24 X 1-1/4" (THROWOUT BEARING COLLAR) 1.00 BL HEX HEAD BOLT, X 1/2" (REAR SEAL RETAINER) 0.75 BL HEX HEAD BOLT, 1/4-20 X 3/4" (STD. 1-3/8" REVERSE PLANETARY) 0.75 BL HEX HEAD BOLT, 5/16-24 X 1-1/4" (SHIFT LINKAGE) 0.75 BL HEX HEAD BOLT, 5/16-24 X 1-1/2" (SHIFT LINKAGE) 1.00 BL HEX HEAD BOLT, 5/16-24 X 2-1/2" (COUPLER SLEEVE, 1-3/8") 1.00 BL HEX HEAD BOLT, 5/16-24 X 2-3/4" (COUPLER SLEEVE, 1-1/2" & 1-3/4") 1.25 BL HEX HEAD BOLT, 3/8-16 X 2" (HEX LOCK-OUT ONLY SHIFT HANDLE BRACKET) 1.50 BL HEX HEAD BOLT, 3/8-16 X 5" (HEX 4-SPEED SHIFT HANDLE BRACKET) 5.00 BL HEX HEAD BOLT, 3/8-16 X 6" (HEX 5-SPEED SHIFT HANDLE BRACKET) 5.00 BL HEX HEAD BOLT, 3/8-16 X 7" (HEX 6-SPEED SHIFT HANDLE BRACKET) 6.00 BL HEX HEAD BOLT, 3/8-24 X 3/4" (CALIPER BRACKET) 1.00 BL HEX HEAD BOLT, 3/8-24 X 1" (CALIPER BRACKET) 1.00 BL HEX HEAD BOLT, 3/8-24 X 4-1/2" (SHIFT/BR.) 3.50 BL SHCS, #10-24 X 3/4" (40-SPLINE CANNON REV. FRONT BEARING RETAINER) 0.75 BL SHCS, #10-32 X 1" (REVERSE SHIFT LEVERS) 0.75 BL SHCS, 1/4-20 X 5/8" (GEAR RED. SUN GEAR / OIL PICK-UP) 0.75 BL SHCS, 1/4-20 X 3/4" (1-3/8" DRIVE SHAFT CLAMP) 0.75 BL SHCS, 1/4-20 X 1" (1-1/2" DRIVE SHAFT CLAMP) 0.75

28 BL SHCS, 1/4-20 X 1-1/4" VALVE BODY 1.00 BL SHCS, 1/4-20 X 1-1/2" (BOAT CLUTCH ROLLER PLATE HUB) 1.00 BL SHCS, 1/4-20 X 1-3/4" 1.00 BL SHCS, 1/4-20 X 2" (SPRAG COVER) 1.00 BL SHCS, 1/4-20 X 2-1/4" (DOUBLE SMALL SPRAG COVER) 1.25 BL SHCS, 1/4-20 X 2-1/2" (FUEL PUMP OVERDRIVE HOUSING) 1.75 BL SHCS, 5/16-18 X 5/8" (40-SPLINE REVERSE PLANETARY) 0.75 BL SHCS, 5/16-18 X 3/4" (2-SPEED BOAT CLUTCH ADAPTOR RING) 0.75 BL SHCS, 5/16-18 X 1" (STANDARD CASE - ALL STYLES) 0.75 BL SHCS, 5/16-18 X 1-1/4" (REVERSE REAR LID - ALL STYLES) 1.00 BL SHCS, 5/16-18 X 1-1/2" (REVERSE CASE / LD PUMP HOUSING & FRONT PLATE) 1.00 BL SHCS, 5/16-18 X 1-3/4" (MID/FRONT - SHIFT LINKAGE TO CASE) 1.25 BL SHCS, 5/16-18 X 2" (RAER MOUNT SHIFT LINKAGE TO CASE) 1.75 BL SHCS, 5/16-24 X 7/8" (BRAKE ROTOR TO HUB) 0.75 BL SHCS, 5/16-24 X 1" (EARLY STYLE STD. CASE) 1.00 BL SHCS, 5/16-24 X 1-1/4" (EARLY STYLE REAR LID) 1.25 BL SHCS, 5/16-24 X 1-1/2" (EARLY STYLE REVERSE CASE) 1.25 BL SHCS, 5/16-24 X 2" (EARLY STYLE SHIFT LINKAGE TO CASE) 1.25 BL SHCS, 3/8-16 X 1-1/4" (HG REV CASE FRONT ADAPTOR PLATE) 1.25 BL SHCS, 3/8-16 X 1-1/2" (HG REV CASE FRONT ADAPTOR PLATE) 1.50 BL SET SCREW, #10-24 X 1/4" (NG AIR SERVO PISTON BASE) 0.75 BL SET SCREW, 5/16-18 X 1/2" (LENCODRIVE REVERSR CASE PLUG) 0.75 BL SET SCREW, 1/4-20 X 3/16" (SHIFT VALVE DET / NG FRONT CASE) 0.75 BL SET SCREW, 3/8-24 (CS-1 FRONT CASE COLLAR BOLT HOLE PLUG) 3.00 BL BHCS, 5/16-18 X 1 1/4 (CS1 LOCKOUT SHIFTER) 1.00 BL TRANS CASE MOUNTING STUD 3.00 BL TRANS CASE MOUNTING STUD ASSEMBLY 8.00 BL /2" PIPE PLUG (OIL FILL/DRAIN - ALL CASES) 2.00 BL /4" PIPE PLUG (AIR REGULATOR / LENCODRIVE OIL PAN) 2.00 BL /8" PIPE PLUG (LENCODRIVE TRANS COOLER PORT / AIR REG) 2.00 BL X 1/2" FHCS (LD SEAL REATAINER SCREW) 0.75

29 BL X 1/4" BHAS (LD OIL FILTER MOUNTING SCREW) 0.75 BL SHCS, 5/16-18 X 7/8" LENCODRIVE OIL PAN BOLT 0.75 BL PHAS, X 1" LENCODRIVE TERMINAL SCREW (PAN HEAD) 1.25 BL BHAS, X 3/4" LENCODRIVE OIL FILTER SCREW 0.75 BL BHAS, X 1/4" LENCODRIVE OIL FILTER BRACKET SCREW 0.75 BL PLUG, #12 AN (LENCODRIVE OIL FILLER) BL PLUG EXTENSION, #12 AN (LENCODRIVE OIL FILLER) BL OBSOLETE PLUG, 1/4" CUP STEEL EXPANSION (LENCODRIVE) 0.25 BL PLUG, 5/8" CUP STEEL EXPANSION (LENCODRIVE) 0.75 BL PLUG, 1/2" CUP STEEL EXPANSION (LENCODRIVE) 0.75

30 BP SHAFT, QUILL BR THRUST WASHER, 3-EARED (REV PLANETARY / SPRAG COVER) BR THRUST WASHER, 6-EARED ( 35 & 40-SPLINE HG REV PANETARY) BR WASHER, 1/2" PLANETARY (68% GS / LD-32 & 40-SPL REV) 3.00 BR WASHER, 1/2" PLANETARY 2.00 BR WASHER, 5/8" PLANETARY 2.00 BR WASHER, 3/4" PLANETARY 2.00 BR WASHER, 3/4" PLANETARY THICK 3.50 BR WASHER, 20MM PLANETARY 3.50 BR COATED WASHER, 1/2" PLANETARY (68% GS / LD-32 & 40-SPL REV.) 5.00 BR COATED WASHER, 1/2" PLANETARY 4.00 BR COATED WASHER, 5/8" PLANETARY 4.50 BR COATED WASHER, 3/4" PLANETARY 5.00 BR COATED WASHER, 3 PLANETARY THICK 6.00 BR COATED WASHER, 20MM PLANETARY 5.00 BR THRUST RACE, SUN GEAR (CS1 / NG 32-SPLINE PLANETARY) 5.00 BR THRUST RACE, REV RING GEAR / L-DRIVE SAFETY SPRAG 6.50 BR RACE, FLOATER HUB BR THRUST RACE, NG PLANETARY & 35-SPLINE H/G REVERSE 6.00 BR THRUST RACE, SUN GEAR (NG 27-SPLINE PLANETARY) 6.60 BR THRUST RACE, 40-SPLINE HG REVERSE PLANETARY 8.00 BR THRUST RACE, SUN GEAR (NG 27-SPLINE DBL PLANETARY) 5.00 BR THRUST RACE, 32-SPLINE LD REVERSE RING GEAR 8.00 BR WASHER, PLASTIC 4-EARED (32-SPLINE LD REV PLANETARY) 6.00

31 BT BELLHOUSING, CHEVY BOAT BT BELLHOUSING, CHRYSLER BOAT BT BELLHOUSING, CHRYSLER BOAT (392 STYLE) BT SAFE DRIVE, DRIVE HUB. BT BOAT CLUTCH DRIVE FLANGE BT SPRAG RACE, SAFE DRIVE INNER. BT BOAT INNER CLUTCH HUB BT BOAT INNER CLUTCH HUB, TOP FUEL (35-SPLINE) BT BOAT INNER CLUTCH HUB, TOP FUEL (31-SPLINE) BT BOAT ROLLER PLATE HUB BT BOAT ROLLER PLATE SPACER BT BOAT CLUTCH HOUSING BT BOAT CLUTCH DRIVE FLANGE, 1-3/8" 6-SPLINE (DISC) BT BOAT CLUTCH DRIVE FLANGE BT BOAT CLUTCH DRIVE FLANGE, 35-SPLINE W/BEARING BT BOAT CLUTCH DRIVE FLANGE, 40-SPLINE W/BEARING BT BOAT INNER CLUTCH HUB, T/F 35-SPLINE BT BOAT INNER CLUTCH HUB, T/F 40-SPLINE BT BOAT CLUTCH HOUSING, 15-PACK

32 CB CRANK BUTTON, CHEVY 1-3/8" 10-SPLINE (6-HOLE) CB CRANK BUTTON, CHEVY 1-3/8" 16-SPLINE (6-HOLE) CB CRANK BUTTON, CHEVY 1-3/8" 16-SPLINE (1/2" 6-HOLE) CB CRANK BUTTON, CHEVY 32-SPLINE (DUAL PATTERN) CB CRANK BUTTON, CHEVY 35-SPLINE (DUAL PATTERN) CB CRANK BUTTON, CHRYSLER 35-SPLINE (8-HOLE) CB CRANK BUTTON, CHRYSLER 35-SPLINE (SLOTTED) CB CRANK BUTTON, CHRYSLER 40-SPLINE (SLOTTED) CB CRANK BUTTON, CHRYSLER 32-SPLINE (6-HOLE) CB CRANK BUTTON, CHRYSLER 10-SPLINE (EVEN PATTERN) CB CRANK BUTTON, CHRYSLER 10-SPLINE (WEDGE 6-BOLT) CB CRANK BUTTON, CHRYSLER 10-SPLINE CB CRANK BUTTON, CHRYSLER 16-SPLINE CB CRANK BUTTON, CHRYSLER 16-SPLINE (WEDGE 6-BOLT) CB CRANK BUTTON, FORD 10-SPLINE (w/out STARTER RING) CB CRANK BUTTON, FORD 16-SPLINE (w/out STARTER RING) CB CRANK BUTTON, FORD 35-SPLINE (w/out STARTER RING) CB CRANK BUTTON, FORD 10-SPLINE (w/flywheel) CB CRANK BUTTON, FORD 16-SPLINE (w/flywheel) CB CRANK BUTTON, FORD 35-SPLINE (w/flywheel) CB CRANK BUTTON, FORD 10-SPLINE (w/starter RING) CB CRANK BUTTON, FORD 16-SPLINE (w/starter RING) CB CRANK BUTTON, FORD 35-SPLINE (w/starter RING) CB SPACER, CHRYSLER CRANK BUTTON CB SPACER, CHEVY CRANK BUTTON CB CRANK BUTTON, 429 FORD CB CRANK BUTTON, 429 FORD 1-1/2" 35-SPLINE

33 CL PRESSURE PLATE SPRING CL CLUTCH HOUSING, STEEL (8-LUG) OBSOLETE (DISC) CL CLUTCH HOUSING, STEEL (MULTI 56-TOOTH) CL CLUTCH HOUSING, ALUMINUM (MULTI 56-TOOTH) CL CLUTCH HOUSING, STEEL 68% (MULTI 56-TOOTH) (DISC) CL CLUTCH HOUSING, ALUMINUM, BOLT-ON (MULTI 56-TOOTH) CL CLUTCH HUB, 7-PACK (EARLY STYLE) (DISC) CL CLUTCH HUB, 10-PACK ALUMINUM CL CLUTCH HUB, 10-PACK STEEL CL FLOATER, STEEL THIN (.060") 7.50 CL FLOATER, STEEL MEDIUM (.072") 8.75 CL FLOATER, STEEL THICK (.090") 9.00 CL FLOATER, STEEL BEAD BLASTED THIN (.060") 9.00 CL FLOATER, ALUMINUM THIN (.060") CL FLOATER, ALUMINUM MEDIUM (.072") CL FLOATER, ALUMINUM THICK (.090") CL FLOATER, ALUMINUM X-THICK (.120") CL DISC, BLUE (SMALL) CL DISC, BLUE (SMALL, MACHINED O.D. for RUBBERIZED FLOATERS) CL DISC, KEV AR/GREY(SMALL) CL DISC, GREEN (SMALL) 8.95 CL DISC, RED (OBSOLETE) 8.95 CL PRESSURE PLATE, 10 PACK CL PRESSURE PLATE, 10 PACK (.450") CL PRESSURE PLATE, 7 PACK CL SHIM, (.015") 3.50 CL SHIM, (.030") 3.50 CL SHIM, (.080") (DISCONTINUED) 4.75 CL SHIFT FORK CL SHIFT FORK, 19% CL ROLLER PLATE ASSEMBLY SET

34 CL ROLLER PLATE, MALE w/pins CL ROLLER PLATE, FEMALE CL ROLLER PLATE, MALE ASSEMBLY CL ROLLER PLATE, FEMALE ASSEMBLY CL ROLLER PLATE ASSEMBLY SET (LIGHT WEIGHT) CL ROLLER PLATE, MALE (LIGHT WEIGHT w/pins) CL ROLLER PLATE, FEMALE (LIGHT WEIGHT) CL ROLLER PLATE, MALE ASSEMBLY (LIGHT WEIGHT) CL ROLLER PLATE FEMALE ASSEMBLY (LIGHT WEIGHT) CL CLUTCH HOUSING, 5 PACK CL CLUTCH HOUSING, 6 PACK CL CLUTCH HOUSING, 7 PACK CL CLUTCH HOUSING, 8 PACK CL CLUTCH HUB, 8 PACK (LIGHT WEIGHT) CL FLOATER, RUBBER BOND (40-DUROMETER) CL FLOATER, RUBBER BOND (50-DUROMETER) CL FLOATER, RUBBER BOND (70-DUROMETER) CL PRESSURE PLATE, 5 PACK (LIGHT WEIGHT) CL PRESSURE PLATE, 6 PACK (LIGHT WEIGHT) CL PRESSURE PLATE, 7 PACK (LIGHT WEIGHT) CL PRESSURE PLATE, 8 PACK (LIGHT WEIGHT) CL SHIM, (.120") CL SHIM, (.125") CL SHIM, (.130") CL SHIM, (.135") CL SHIM, (.140") CL SHIM, (.145") CL SHIM, (.150") CL SHIM, (.155") CL SHIM, (.160") CL SHIM, (.165") 12.00

35 CL SHIM, (.170") CL SHIM, (.175") CL SHIM, (.180") CL SHIM, (.185") CL SHIM, (.190") CL SHIM, (.200") CL SHIM, (.210") CL SHIM, (.220") CL RADIAL PLATE ASSEMBLY, CS2 (NG LARGE CASE) CL RADIAL PLATE, (CS2/CS3) CL RADIAL PLATE STUD CL RADIAL PLATE NIPPLE, LONG (CS2) CL RADIAL PLATE NIPPLE, SHORT (CS3 / ST1200) CL CLUTCH HOUSING, 5-PACK DOUBLE CL PRESSURE PLATE, 5-PACK DOUBLE CL RADIAL PLATE ASSEMBLY, CS3 (NG SMALL CASE) CL CLUTCH HUB,CS4 STEEL CL RETAINER,CS4 CLUTCH HUB SNAP RING RETAINER CL CLUTCH HOUSING, 5-PACK ALUM 10%-GEAR SET (CS2 BOLT-ON) CL CLUTCH HOUSING, 7-PACK LARGE (CS2 BOAT) CL CLUTCH HOUSING, 7-PACK LARGE (CS2) CL CLUTCH HOUSING, 8-PACK LARGE (CS2) CL CLUTCH HUB, 7-PACK LARGE (CS2) CL CLUTCH HUB, 8-PACK LARGE (CS2) CL CLUTCH HUB, 7-PACK LARGE STEEL (CS2) CL FLOATER, LARGE STEEL THIN.060" (CS2) 9.80 CL FLOATER, LARGE STEEL THIN.072" (CS2) CL FLOATER, LARGE STEEL THICK.090" (CS2) CL FLOATER, LARGE ALUMINUM THIN.060" (CS2) BLACK ANODIZED CL FLOATER, LARGE ALUMINUM THICK.072" (CS2) CL DISC, LARGE BLUE (CS2) 17.50

36 CL DISC, LARGE KEVLAR (CS2) CL DISC, LARGE GREEN (CS2) CL DISC, LARGE SPECIAL GREEN KEVLAR (CS2 / SK WELLMAN) CL DISC, LARGE RED (CS2 / ALTO) CL PRESSURE PLATE, 7-PACK LARGE (CS2) CL PRESSURE PLATE, 8-PACK LARGE (CS2) CL CLUTCH HOUSING, 7-PACK LARGE STEEL (CS GEAR SET) CL CLUTCH PLATE, GOLD (TRANS-BRAKE) CL CLUTCH PLATE, RED (TRANS-BRAKE) CL CLUTCH PLATE, GREY (TRANS-BRAKE) CL FLOATER PLATE,.050 (TRANS-BRAKE) CL FLOATER PLATE,.060 (TRANS-BRAKE) CL PRESSURE PLATE SPRING,.030"-THICK (ST-1200) CL CLUTCH HOUSING (ST-1200) CL CLUTCH HUB, 7-PACK STEEL (ST-1200) CL CLUTCH DISC, RED (ST1200) 8.00 CL PRESSURE PLATE, 7-PACK (ST-1200) CL RADIAL PLATE (ST-1200) CL RADIAL PLATE ASSEMBLEY (ST1200)

37 CP GEAR SET ELIMINATOR, 6-SPLINE CP GEAR SET ELIMINATOR, 29 X 35-SPLINE CP GEAR SET ELIMINATOR, 32 X 35-SPLINE CP COUPLER, 8-3/4" CHRYSLER MALE PINION (1-3/16" 10-SPLINE) CP COUPLER, 1-1/4" 10-SPLINE MALE (HALIBRAND REAR END) CP COUPLER, 1-3/8" 10-SPLINE MALE SHORT (1.200" OAL) CP COUPLER, 1-3/8" 10-SPLINE MALE (2.5" OAL) CP COUPLER, 1-3/8" 13-SPLINE MALE (LATE OLDS PINION 2.460" OAL) CP COUPLER, 1-3/8" 16-SPLINE MALE (2.5" OAL) CP COUPLER, 1-3/8" 16-SPLINE MALE LONG (3.5" OAL) CP COUPLER, 1-3/8" 16-SPLINE MALE SHORT (1.200" OAL) CP COUPLER, 1-3/8" 32-SPLINE MALE SHORT (1.200" OAL) CP COUPLER, 1-3/8" 32-SPLINE MALE (2.5" OAL) CP COUPLER, 1-3/8" 32-SPLINE LONG (3.5" OAL) CP COUPLER, 1-1/2" 35-SPLINE MALE (2.5" OAL) CP COUPLER, 1-1/2" 35-SPLINE MALE LONG (3.5" OAL) CP COUPLER, 1-1/2" 35-SPLINE MALE PINION (2.5" OAL) CP DRIVE SHAFT CLAMP, 1-1/2" 35-SPLINE (1-PIECE) CP DRIVE SHAFT CLAMP, 1-3/8" 16/32-SPLINE (1-PIECE) CP DRIVE SHAFT CLAMP, 1-3/8" 16/32-SPLINE STEEL (1-PIECE) CP DRIVE SHAFT CLAMP, 1-3/8" 16/32-SPLINE w/magnet HOLES (2-PC) CP DRIVE SHAFT CLAMP, 1-1/2" 35-SPLINE (2-PIECE) CP DRIVE SHAFT CLAMP, 1-3/8" 16/32-SPLINE (2-PIECE) CP COUPLER SLEEVE, 1-1/4" 10-SPLINE (DISC) CP COUPLER SLEEVE, 1-3/8" 10-SPLINE (DISC) CP COUPLER SLEEVE, 1-3/8" 16-SPLINE CP COUPLER SLEEVE, 1-3/8" 32-SPLINE CP COUPLER SLEEVE, 1-1/2" 35-SPLINE CP TRANSMISSION ELIMINATOR SLEEVE CP COUPLER, POWERGLIDE SHORT CP COUPLER, POWEGLIDE LONG

38 CP COUPLER, 1-1/4" 10-SPLINE MALE CP COUPLER, DUAL ENGINE (CHRYSLER) (DISC) CP COUPLER, DUAL ENGINE, FLYWHEEL HALF (CHRYSLER) (DISC) CP COUPLER, DUAL ENGINE (CHEVY) (DISC) CP COUPLER, DUAL ENGINE, FLYWHEEL HALF (CHEVY) (DISC) CP COUPLER SLEEVE, DUAL ENGINE (DISC) CP COUPLER, DUAL ENGINE CRANK HUB (DISC) CP COUPLER, ENGINE REAR/FRONT (FORD 2) (DISC) CP COUPLER, 1-1/2" 35-SPLINE STAR (1.50" OAL) (DISC) CP COUPLER, 1-1/2" 35-SPLINE STAR (3.25" OAL) CP COUPLER, 1-3/8" 10-SPLINE FEMALE CP COUPLER, 1-1/4" 28-SPLINE FEMALE PINION (STOCK FORD) CP COUPLER, 1-3/8" 6-SPLINE FEMALE PINION (DISC) CP COUPLER, 1-3/8" 13-SPLINE FEMALE PINION (LATE OLDS) (DISC) CP COUPLER, 1-3/16" 10-SPLINE FEMALE PINION (EARLY OLDS) (DISC) CP COUPLER, 1-3/16" 10-SPLINE FEMALE PINION (8-3/4" CHRYSLER) CP COUPLER, 1-3/8" 29-SPLINE FEMALE PINION (DANA) CP COUPLER, 1-3/8" 16-SPLINE FEMALE CP COUPLER, 1-3/8" 16-SPLINE FEMALE LONG CP COUPLER, 1-3/8" 32-SPLINE FEMALE CP COUPLER, 1-3/8" 32-SPLINE FEMALE LONG CP COUPLER, 1-1/2" 35-SPLINE FEMALE CP COUPLER, 1-1/2" 35-SPLINE FEMALE LONG CP COUPLER, 1-1/2" 35-SPLINE FEMALE (CUSTOM LENGTH) CP COUPLER, 1-1/2" 35-SPLINE FEMALE PINION CP COUPLER, 1-1/2" 35-SPLINE FEMALE PINION (CUSTOM LENGTH) CP COUPLER, 1-1/4" 10-SPLINE FEMALE (CUSTOM LENGTH) CP YOKE, 1-3/8" 16-SPLINE (LENCO OUTPUT) CP U-JOINT, SERIES 1350 CP YOKE, 1-3/8" 16-SPLINE BILLET CP YOKE, 1-3/16" 27-SPLINE BILLET POWERGLIDE

39 CP YOKE, 1-38" 32-SPLINE BILLET CP COUPLER, 1-1/8" 48-SPLINE BLOWER SNOUT DRIVE (DISC) CP GEAR SET ELIMINATOR, 27 X 32-SPLINE CP GEAR SET ELIMINATOR, 27 X 35-SPLINE CP COUPLER, 40-SPLINE REVERSE FRONT DRIVE CP COUPLER, 40-SPLINE REVERSE FRONT DRIVE (MA-350) CP COUPLER, 35 TO 40-SPLINE FRONT DRIVE (DISC) CP COUPLER, 40 TO 35-SPLINE FRONT DRIVE (DISC) CP COUPLER, 40-SPLINE FRONT DRIVE (SMALL BEARING) (DISC) CP COUPLER, 40-SPLINE FRONT DRIVE (LARGE BEARING) CP COUPLER, 40-SPLINE FRONT DRIVE (SMALL BEARING / MA-350) CP COUPLER, 40-SPLINE FRONT DRIVE (LARGE BEARING / MA-350) CP CLAMP, 1-3/4" 40-SPLINE DRIVE SHAFT CP CLAMP, 1-3/4" 40-SPLINE (2-PIECE) DRIVE SHAFT CP SLEEVE, 1-3/4" 40-SPLINE DRIVE SHAFT CP COUPLER, 1-3/4" 40-SPLINE MALE (2.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (3.00" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (3.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (4.00" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (4.25" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (4.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE MALE (CUSTOM LENGTH) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (2.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (3.19" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (3.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (4.00" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (4.375" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (4.50" OAL) CP COUPLER, 1-3/4" 40-SPLINE FEMALE (CUSTOM LENGTH) CP CLAMP, 1-3/4" 40-SPLINE COMPUTER (DISC) 39.00

40 CS CASE, 2-SPEED ONLY (12 HOLE) CS CASE, 2-SPEED ONLY (CS1-N) CS CASE, 2-SPEED ONLY (CS1-N / DUAL SPRAG) CS CASE, GEAR REDUCTION (68%) CS CASE, GEAR REDUCTION (ADD-ON) CS CASE, GEAR REDUCTION (FRONT) CS CASE, 3-SPEED 12-BOLT FRONT (NO SIDE HOLES) CS CASE, CS1N FRONT CS CASE, 4-SPEED 12-BOLT FRONT (w/side HOLES) CS CASE, CS1-N CENTER (DUEL SPRAG) CS CASE, 4-SPEED 12-BOLT CENTER CS CASE, 3-SPEED 12-BOLT REAR (NO SIDE HOLES) (DISC) CS CASE, CS1-N REAR CS CASE, 3 & 4-SPEED 12-BOLT REAR (w/side HOLES) CS CASE, CS1-N REAR (DUEL SPRAG) CS CASE, REVERSE ONLY (FLANGE STYLE) (DISC) CS CASE, REVERSE ONLY (EARLY STYLE) (DISC) CS CASE, 2-3 & 4-SPEED REVERSE CS CASE, CS1-N REVERSE CS CASE, CS1-N REVERSE (DUEL SPRAG) CS ENDPLATE, 2-SPEED 12-BOLT.360" C'BORE (MAG) CS ENDPLATE, 2-SPEED 12-BOLT.360" C'BORE (ALUM) CS ENDPLATE, 2-SPEED CS1-N (MAG) CS ENDPLATE, 2-SPEED CS1-N (ALUM) CS HIGH GEAR ONLY ADAPTER, 35-SPLINE (MAG) (DISC) CS HIGH GEAR ONLY ADAPTER, 35-SPLINE (ALUM) (DISC) CS HIGH GEAR REVERSE FRONT PLATE, 1-3/4" 40-SPLINE CS ADAPTER RING, CS1 REAR TO CS1-N REAR CS ADAPTER RING, CS1 FRONT TO CS1-N REAR CS ADAPTER RING, 12-BOLT CS ADAPTER RING, CS1-N TO CS1-N

41 CS ADAPTER RING, CS1-N FRONT TO CS1 REAR CS REVERSE LID, 35-SPLINE SINGLE BEARING (ALUM) CS REVERSE LID, 35-SPLINE DOUBLE BEARING (ALUM) CS REVERSE LID, 8-HOLE (MAG) CS REVERSE LID, QUICK DISCONNECT CS TUBE, COUPLER COVER QUICK DISCONNECT (6") CS TUBE, COUPLER COVER QUICK DISCONNECT (13") CS TUBE, COUPLER COVER QUICK DISCONNECT (35-SPLINE / 6") CS REVERSE LID, QUICK DISCONNECT (35-SPLINE) CS CLAMP, QUICK DISCONNECT CS CASE, LARGE NG FRONT CS CASE, LARGE NG FRONT BILLET NEW CS CASE, LARGE NG FRONT (LIGHT WEIGHT) CS CASE, LARGE NG FRONT (LIGHT WEIGHT) BILLET BLACK ANODIZED NEW CS CASE, LARGE NG REAR CS CASE, LARGE NG REAR BILLET NEW CS CASE, LARGE NG REAR (LIGHT WEIGHT) CS CASE, LARGE NG REAR (LIGHT WEIGHT) BILLET BLACK ANODIZED NEW CS CASE, LARGE NG REAR (3/4" DOUBLE) CS CASE, LARGE NG REVERSE CS CASE, LARGE NG REVERSE (LIGHT WEIGHT) CS ADAPTOR PLATE, LARGE NG CASE (3/4" DOUBLE) CS REAR LID, LARGE NG 2-SPEED 12-BOLT CS ADAPTER RING, CS1 TO CS CS ADAPTER RING, CS1-N TO CS CS CASE, SMALL NG FRONT CS CASE, SMALL NG GEAR REDUCTION ADD-ON CS CASE, SMALL NG REAR (DISC) CS CASE, SMALL NG REAR (16%) CS CASE, SMALL NG REVERSE CS CASE, 35-SPLINE CANNON STYLE HG REVERSE

42 CS CASE, 40-SPLINE CANNON STYLE HG REVERSE CS ENDPLATE, 2-SPEED 6-BOLT (ALUMINUM) CS REVERSE LID, 40-SPLINE ALUM (SINGLE BEARING) CS REVERSE LID, 40-SPLINE ALUM (DOUBLE BEARING) CS REVERSE LID, 40-SPLINE (SINGLE BEARING) CS CASE, 40-SPLINE CANNON (HIGH GEAR ONLY) CS CASE, 40-SPLINE w/adapter (HIGH GEAR ONLY) CS ENDPLATE, 2-SPEED (DOUBLE SPRAG) CS ENDPLATE, 2-SPEED CS3 (DOUBLE SPRAG) CS ENDPLATE, 2-SPEED MOTORCYCLE CS3 (DOUBLE SPRAG) CS ENDPLATE, BOAT 10% CS ENDPLATE, 2-SPEED 19% (DOUBLE SPRAG) CS ENDPLATE, 2-SPEED CS2 (DOUBLE SPRAG) CS ENDPLATE, 2-SPEED CS2 (DOUBLE LARGE SPRAG) CS HIGH GEAR ONLY ADAPTER, 40-SPLINE (MAG) CS HIGH GEAR ONLY ADAPTER, (ALUMINUM) CS CASE, BOAT (10%) CS CASE, LENCODRIVE (ALUMINUM) 1, CS CASE, LENCODRIVE (MAG) 1, CS OIL PAN, LENCODRIVE (ALUMINUM) CS OIL PAN, LENCODRIVE (MAG) CS BELLHOUSING, LENCODRIVE SHORT (6.700") (DISC) CS BELLHOUSING, LENCODRIVE LONG (7.375") (DISC) CS CASE, ST CS ADAPTER PLATE, ST-1200 UNIVERSAL (FORD, CHRYS. & CHEVY) CS ADAPTER PLATE, ST1200 LENCO PATTERN CS REVERSE CASE, ST CS REAR LID, ST SPEED ONLY CS REVERSE LID, ST HOLE (ALUM) CS REVERSE LID, ST HOLE (BILLET ALUM) CS ADAPTER, BOAT OVERDRIVE

43 DS DRIVE SHAFT, 10-SPLINE 4" ALL-SPLINE (300-M) DS DRIVE SHAFT, 16-SPLINE 4" ALL-SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 4" ALL-SPLINE (300-M) DS DRIVE SHAFT, 35-SPLINE 4" ALL-SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 4" ALL SPLINE (MA-300) DS DRIVE SHAFT, 35-SPLINE 4" ALL SPLINE (MA-300) DS DRIVE SHAFT, 40-SPLINE 4" ALL SPLINE (MA-300) DS DRIVE SHAFT, 16-SPLINE 6" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 6" ALL SPLINE (300-M) DS DRIVE SHAFT, 35-SPLINE 6" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 6" ALL SPLINE (MA-300) DS DRIVE SHAFT, 35-SPLINE 6" ALL SPLINE (MA-300) DS DRIVE SHAFT, 40-SPLINE 6" ALL SPLINE (MA-300) DS DRIVE SHAFT, 16-SPLINE 8" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 8" ALL SPLINE (300-M) DS DRIVE SHAFT, 35-SPLINE 8" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 8" ALL SPLINE (MA-300) DS DRIVE SHAFT, 35-SPLINE 8" ALL SPLINE (MA-300) DS DRIVE SHAFT, 40-SPLINE 8" ALL SPLINE (MA-300) DS DRIVE SHAFT, 16-SPLINE 10" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 10" ALL SPLINE (300-M) DS DRIVE SHAFT, 35-SPLINE 10" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 10" ALL SPLINE (MA-300) DS DRIVE SHAFT, 35-SPLINE 10" ALL SPLINE (MA-300) DS DRIVE SHAFT, 40-SPLINE 10" ALL SPLINE (MA-300) DS DRIVE SHAFT, 16-SPLINE 12" (300-M) DS DRIVE SHAFT, 32-SPLINE 12" (300-M) DS DRIVE SHAFT, 35-SPLINE 12" (300-M) DS DRIVE SHAFT, 32-SPLINE 12" (MA-300) DS DRIVE SHAFT, 35-SPLINE 12" (MA-300) DS DRIVE SHAFT, 40-SPLINE 12" (MA-300)

44 DS DRIVE SHAFT, 16-SPLINE 14" (300-M) DS DRIVE SHAFT, 32-SPLINE 14" (300-M) DS DRIVE SHAFT, 35-SPLINE 14" (300-M) DS DRIVE SHAFT, 32-SPLINE 14" (MA-300) DS DRIVE SHAFT, 35-SPLINE 14" (MA-300) DS DRIVE SHAFT, 40-SPLINE 14" (MA-300) DS DRIVE SHAFT, 16-SPLINE 16" (300-M) DS DRIVE SHAFT, 32-SPLINE 16" (300-M) DS DRIVE SHAFT, 35-SPLINE 16" (300-M) DS DRIVE SHAFT, 32-SPLINE 16" (MA-300) DS DRIVE SHAFT, 35-SPLINE 16" (MA-300) DS DRIVE SHAFT, 40-SPLINE 16" (MA-300) DS DRIVE SHAFT, 16-SPLINE 18" (300-M) DS DRIVE SHAFT, 32-SPLINE 18" (300-M) DS DRIVE SHAFT, 35-SPLINE 18" (300-M) DS DRIVE SHAFT, 32-SPLINE 18" (MA-300) DS DRIVE SHAFT, 35-SPLINE 18" (MA-300) DS DRIVE SHAFT, 40-SPLINE 18" (MA-300) DS DRIVE SHAFT, 16-SPLINE 20" (300-M) DS DRIVE SHAFT, 32-SPLINE 20" (300-M) DS DRIVE SHAFT, 35-SPLINE 20" (300-M) DS DRIVE SHAFT, 32-SPLINE 20" (MA-300) DS DRIVE SHAFT, 35-SPLINE 20" (MA-300) DS DRIVE SHAFT, 40-SPLINE 20" (MA-300) DS DRIVE SHAFT, 16-SPLINE 22" (300-M) DS DRIVE SHAFT, 32-SPLINE 22" (300-M) DS DRIVE SHAFT, 35-SPLINE 22" (300-M) DS DRIVE SHAFT, 32-SPLINE 22" (MA-300) DS DRIVE SHAFT, 35-SPLINE 22" (MA-300) DS DRIVE SHAFT, 40-SPLINE 22" (MA-300) DS DRIVE SHAFT, 16-SPLINE 24" (300-M)

45 DS DRIVE SHAFT, 32-SPLINE 24" (300-M) DS DRIVE SHAFT, 35-SPLINE 24" (300-M) DS DRIVE SHAFT, 32-SPLINE 24" (MA-300) DS DRIVE SHAFT, 35-SPLINE 24" (MA-300) DS DRIVE SHAFT, 40-SPLINE 24" (MA-300) DS DRIVE SHAFT, 16-SPLINE 26" (300-M) DS DRIVE SHAFT, 32-SPLINE 26" (300-M) DS DRIVE SHAFT, 35-SPLINE 26" (300-M) DS DRIVE SHAFT, 32-SPLINE 26" (MA-300) DS DRIVE SHAFT, 35-SPLINE 26" (MA-300) DS DRIVE SHAFT, 40-SPLINE 26" (MA-300) DS DRIVE SHAFT, 16-SPLINE 28" (300-M) DS DRIVE SHAFT, 32-SPLINE 28" (300-M) DS DRIVE SHAFT, 35-SPLINE 28" (300-M) DS DRIVE SHAFT, 32-SPLINE 28" (MA-300) DS DRIVE SHAFT, 35-SPLINE 28" (MA-300) DS DRIVE SHAFT, 40-SPLINE 28" (MA-300) DS DRIVE SHAFT, 16-SPLINE 30" (300-M) DS DRIVE SHAFT, 32-SPLINE 30" (300-M) DS DRIVE SHAFT, 35 SPLINE 30" ALL SPLINE (300-M) DS DRIVE SHAFT, 32-SPLINE 30" (MA-300) DS DRIVE SHAFT, 35-SPLINE 30" (MA-300) DS DRIVE SHAFT, 40-SPLINE 30" (MA-300) SPECIAL LENGTHS...ADD RIFLE DRILLING (EXCEPT 16 SPLINE)...ADD EXPEDITION CHARGE...ADD LENGTHS OVER 36" (16/32 SP. 300M)...ADD (PER INCH) LENGTHS OVER 36" (32 SP. MARAGE)...ADD (PER INCH) LENGTHS OVER 36" (35 SP. 300M)...ADD (PER INCH) LENGTHS OVER 36" (35 SP. MARAGE)...ADD (PER INCH) LENGTHS OVER 36" (40 SP. MARAGE)...ADD (PER INCH) 60.00

46 DW DOWEL PIN, 1/4" X 1/2" HEX REV. LOCKOUT SLIDE BLOCK 0.75 DW DOWEL PIN, 1/4" X 5/8" TOWER PLUNGER / NG SPRAG COVER ER 0.75 DW DOWEL PIN, 1/4" X 7/8" ROLLER PLATE ROLLER 1.50 DW DOWEL PIN, 1/4" X 1" STD. SHIFT FORK 1.50 DW DOWEL PIN, 1/4" X 1 1/4" MALE-HALF ROLLER PLATE GUIDE 1.60 DW DOWEL PIN, 3/8" X 7/8" REVERSE SHIFT FORK 1.50 DW DOWEL PIN, 3/16" X 7/8" NG RADIAL PLATE 1.25 DW DOWEL PIN, 1/4" X 1-3/4" LENCODRIVE TRANS BRAKE FLOATER 1.50 DW DOWEL PIN, 1/8" X 1" LENCODRIVE VALVE BODY CONV./MAIN 0.50 DW DOWEL PIN, 1/8" X 1-1/8" LENCODRIVE TRANS BRAKE 0.60