7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

Size: px

Start display at page:

Download "7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT"

Raymond Marshall
6 years ago
Views:

1 RC10GT & RTR GT MC 9 McCOY GLOW PLUG CLUTCH NUT CLIPS WASHER, # NYLON WIRE TIES, 6" heavy duty NYLON TIES, 8", light duty for receiver SELF-TAPPING screw, 2-6 X 1/4" /8 x /8 BALL BEARING, unflanged pr /16 x 3/8 BALL BEARING, unflanged pr SPRING pr X /16 SOCKET HEAD SCREW RED SILICONE "O" RINGS only, as used in rebuild kits # SILICONE SHOCK OIL, 10 wt. 2 ounce bottle SILICONE SHOCK OIL, 20 wt. 2 ounce bottle SILICONE SHOCK OIL, 30 wt. 2 ounce bottle SILICONE SHOCK OIL, 40 wt. 2 ounce bottle SILICONE SHOCK OIL, 80 wt. 2 ounce bottle SILICONE SHOCK OIL, 1 wt. 2 ounce bottle SILICONE SHOCK OIL, 2 wt. 2 ounce bottle SILICONE SHOCK OIL, 3 wt. 2 ounce bottle PRO-LINE GT BODY, F FRONT BLOCK CARRIER, 30 deg. caster (kit standard) pr FRONT BLOCK CARRIER, caster pr FRONT BLOCK CARRIER, 10. caster pr FRONT BLOCK CARRIER, 1 caster pr FRONT BLOCK CARRIER, 20 caster pr FRONT BLOCK CARRIER, 2 caster pr ALUMINUM FRONT INLINE AXLE. Axle thread is now -40, not Uses pr 6.00 #6222 black nylon locknut. Now standard on all off road cars & trucks INLINE STEERING BLOCK, for alum. axles. Now standard on all off road cars pr 2.00 & trucks SELF-THREADING NYLON LOCKNUT, for #6220 axles KINGPIN with clips, 1.00" pr HINGE PIN, outer, with clips, 1.020" pr FRONT WHEEL LOCKNUTS, TURNBUCKLE, 1.2 pr STEERING DRAG LINK, molded SHORT BALL ENDS, steel, (4-40 threaded ball studs) w/plastic end caps BALL END DUST COVER LONG BALL END,.10 longer thread than #6270, with cups and nuts. Stainless steel BALL CUP, standard size, nylon ALUMINUM FLAT HEAD Machine screw, 8-32 X 1/2" X 1/4 SOCKET HEAD SCREW SOCKET HEAD Cap screw, 4-40 X 1/4" steel FLAT HEAD Socket screw, 4-40 X 1/4" FLAT HEAD Socket screw, 4-40 X 3/8" NUTS, 6 each, plain nut, nylon & steel locknuts /8 E-CLIP HOOD PINS ANTENNA KIT DOGBONE SPRINGS & SPACERS REAR STUB AXLE with roll pin. Only fits #7800 or #7802 rear wheels ROLL PIN for stub axle. Fits #6374 or 7362 rear axles HINGE PIN, rear, outer. Fits #63 or #734 rear A-arms CONE WASHER, 1/4" x.400 x B SHOCK BODY, rear, 1.32, BLUE 1 6.7

2 642B SHOCK BODY, front, 1.02, BLUE END CAP, molded composite SHOCK ASSEMBLY TOOL SHOCK SET, rear, 1.32, RACING pr SHOCK SET, front, 1.02, RACING pr SHOCK BODY, rear, 1.32, RACING SHOCK BODY, front, 1.02, RACING REBUILD KIT, for 4 shocks set SHOCK SHAFT 1.32 Stroke SHOCK SHAFT 1.02 Stroke PISTONS, all 0.4 bore shocks SHOCK PISTON, 4 each of #1, #2 & #3 to adjust dampening SHOCK DOWNSTOP, (travel limiters),4 ea. of 3 sizes 1/8" (.12"), 1/16" (.062") set 1.0 and 1/32" (.031") O-RING, shock end caps-to-body seals MOUNTING KIT, with rod ends, for 2 shocks ROD ENDS for 2 shocks,.230 ball pr NYLON LOCKNUT SHOCK BUSHINGS SPRING COLLAR & CUP set TRUCK & BUGGY REAR RACING SPRING, silver pr TRUCK & BUGGY REAR RACING SPRING, green pr TRUCK & BUGGY REAR RACING SPRING, black pr SPUR GEAR SCREWS IDLER SHAFT & GEAR SET set DRIVE GEAR/SHAFT ASSEMBLY, roll pin DIFF THRUST WASHER PRECISION THRUST BALLS, /64" DIFF THRUST BOLT, Thrust Bearing Cover, Dogbone Spacers & Locking T- set 2.00 nut 681 CARBIDE DIFF BALLS, large 3/32" DIFF THRUST SPRING TORQUE CONTROL SPRING & LOCKNUT set BLACK GREASE /32" x /16" BALL BEARING, unflanged pr STEALTH DIFF LUBE THRUST BEARING WASHER, replaces #686 thrust bearing set COMPLETE BUSHING SET FOR STEALTH TRANSMISSION /32" x /16" BUSHING, unflanged /8" x /8" BUSHING, unflanged /16" x 3/8" BUSHING, unflanged LOCKNUT SERVO TAPE STRIP X 3/8 SOCKET HEAD CAP SCREW X /16 SOCKET HEAD CAP SCREW X 1/4 FLAT HEAD SCREW X 1/2 FLAT HEAD SCREW /16" X /16" BALL BEARING, flanged pr BUTTON HEAD Cap screw, 4-40 X 1/2" BUTTON HEAD Socket screw, 4-40 X /16" SOCKET HEAD Cap screw, 4-40 X 3/8" SOCKET HEAD Cap screw, 4-40 X 1/2" SOCKET HEAD Cap screw, 4-40 X 3/4" SOCKET HEAD Cap screw, 4-40 X 1" (for Yokomo exhaust manifold installation) 6932 SOCKET HEAD Cap screw, 4-40 X /16" ALUMINUM WASHER, # SET SCREWS & WRENCH, 4-40 X 1/8" TRUCK FRONT A-ARM, (new design) black composite material pr 7.00

3 7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.67" pr GT RACING FRONT SHOCK TOWER GT RACING FRONT SHOCK TOWER, composite SHOCK/TURNBUCKLE ROD END, nylon w/plastic pivot ball (replaces # w/steel ball end) 723 TURNBUCKLE, THIN PLAIN NUT, 4-40, for ball ends TRUCK NOSE PLATE SCREW SET GT FRONT TUBE MOUNTS pr NOSE BRACE TUBES, blue pr FRONT BODY MOUNT BRACE FRONT BODY MOUNTS pr REAR BODY MOUNTS with screws pr FRONT BUMPER, nylon SERVO MOUNT & OFFSET SPACER set SMALL WASHER TRUCK REAR A-ARMS, composite (requires use of #6381 hinge pin) pr REAR A-ARM HINGE PIN, inner; clips, 2.084" pr BUSHING, 1/4 X 3/8" unflanged, for #6374 or 7362 rear axles DOGBONE REAR HUB CARRIERS, 0 toe-in per side pr REAR HUB CARRIERS, 1. toe-in per side pr REAR AXLE SHIMS 3/16" I.D. X.010", fits MIP CVD s and #7367 axles /16" REAR AXLE ROLL PINS, fits MIP CVD s and #7367 axles REAR AXLE BEARING SPACER, aluminum (fits only the #7367 rear axle and MIP CVD s) 7379 MIP CVD BONE, for T2/T3 or GT MIP CVD AXLE, for T2/T3 or GT MIP CVD REBUILD KIT, for two axles set MIP CVD S, rebuildable universal axles. pr TRUCK FRONT RACING SPRING, gold pr TRUCK FRONT RACING SPRING, black pr TRUCK FRONT RACING SPRING, green pr TRUCK FRONT RACING SPRING, silver pr TRUCK FRONT RACING SPRING, blue pr TRUCK FRONT RACING SPRING, red pr TRUCK REAR RACING SPRING, blue pr TRUCK REAR RACING SPRING, gold pr TRUCK REAR RACING SPRING, red pr REAR BULKHEAD SERVO MOUNTS 2pr ANTENNA/RECEIVER MOUNT REAR BUMPER FOAM PAD, for mounting receiver battery pack SERVO SAVER, plastic only pr SERVO SAVER KIT COMPLETE BRAKE BRACKET, plated BRAKE SHOE, plated BRAKE DISC, fiber DISC BRAKE ADAPTER, plastic DISC BRAKE CAM,, steel BRAKE CAM CLIP (push nut) THROTTLE PIVOT, aluminum THROTTLE PIVOT CLIP (push nut) SERVO HORN ADAPTER, plastic BRAKE/THROTTLE LINKAGE KIT, complete DISK BRAKE ADAPTER, aluminum 1 3.0

4 762 THROTTLE RETURN SPRING SET set CLUTCH SHOE, PTFE pr CLUTCH NUT for Dynamite engine CLUTCH NUT (fits Yokomo and new OS Max engines) CLUTCH NUT, special (fits OS Max crankshafts made before Oct. 1993) TOOTH, 32 PITCH CLUTCH BELL, steel. Recommended gear for small, tight, off road tracks TOOTH, 32 PITCH CLUTCH BELL, steel. Recommended gear for larger off road tracks TOOTH, 32 PITCH CLUTCH BELL, steel. For use on oval track racing (will not fit pull start engines) TOOTH, 32 PITCH CLUTCH BELL, steel. For use on large oval track racing (will not fit pull start engines). WARNING: May require after-market parts and modification to truck FLYWHEEL, non-pull start engine (Yokomo, Dynamite, OS Max) RACING FOUR SHOE FLY-WHEEL, requires two #7601 clutch shoe sets, not included 7612 FLYWHEEL, pull start engine (Yokomo, Dynamite, OS Max) PICCO SPACER FLYWHEEL COLLET, with spacer shim FLYWHEEL PIN SPECIAL CUT OFF NUT, for cutting crankshaft to correct length for clutch nut installation (Yokomo, Dynamite and OS Max) 7633 BUTTON HEAD Socket Screw, 4-40 x /8" REAR SUSPENSION MOUNTS, 3 toe-in per side pr REAR SUSPENSION MOUNTS, 3 toe-in, 2 anti-squat per side pr RACING REAR SHOCK TOWER RACING REAR SHOCK TOWER, carbon fiber REAR SHOCK MOUNTS, nylon TRANSMISSION CASE TOOTH, 32 PITCH SPUR GEAR TOOTH, 32 PITCH SPUR GEAR DIFF GEAR, 2.60: DRIVE SHAFT ROLL PIN DIFF DRIVE RINGS, 2.60: DIFF OUTDRIVE HUB, right, 2.60: DIFF OUTDRIVE HUB, left, 2.60: DRIVE SHAFT SPACER TRANSMISSION BRACE FLAT HEAD Socket Screw, 4-40 x 7/ FLAT HEAD Socket screw, 4-40 X /16" LIGHTWEIGHT ALUMINUM SCREW SET, for all RC10GT models (70 screws) AIR FILTER KIT, consists of paper filter, foam prefilter, and air filter boot PAPER AIR FILTER ELEMENT FOAM PREFILTER ELEMENT AIR FILTER BOOT NYLON WIRE TIES, 4" light duty FUEL TANK, plastic, 7cc FUEL TANK FITTING FUEL TUBING, 1" FUEL TUBING, 3 feet GT MUFFLER BRACKET RTR MUFFLER BRACKET MUFFLER, TUNED PIPE SILICONE EXHAUST TUBING, 2" GASKET, exhaust manifold EXHAUST MANIFOLD, for pull start engine (Yokomo, Dynamite and OS Max) EXHAUST MANIFOLD, for non-pull start engine (Yokomo, Dynamite and OS Max) 7740 MUFFLER, black anodized

5 7741 MUFFLER, polished (chrome look) MUFFLER, blue anodized MUFFLER, purple anodized MANIFOLD, PULL START, black anodized MANIFOLD, PULL START, polished (chrome look) MANIFOLD, PULL START, blue anodized MANIFOLD, PULL START, purple anodized MANIFOLD, NON PULL START, black anodized MANIFOLD, NON PULL START, polished (chrome look) MANIFOLD, NON PULL START, blue anodized MANIFOLD, NON PULL START, purple anodized RTR BLUE CHASSIS NOSE TUBE MOUNT (RTR) pr NON PULL START ENGINE MOUNT PULL START ENGINE MOUNT TRANSMISSION MOUNT X 3/8 BUTTON HEAD SCREW GT FRONT BUMPER X 7/16 SOCKET HEAD CAP SCREW PLAIN NUT PRELOAD SPACER, 4 each of 4 different sizes TOOTH, 32 PITCH CLUTCH BELL, steel TOOTH, 32 PITCH CLUTCH BELL, steel TOOTH 32 PITCH SPUR GEAR TOOTH 32 PITCH SPUR GEAR TOOTH 32 PITCH SPUR GEAR SERVO SAVER TUBE & NUT SERVO HORNS, molded (1 ea. fits Airtronics, Futaba, Hitec or JRpropo) TORQUE CONTROL HUB, inner TORQUE CONTROL HUB, outer CLUTCH DISC MC-9 HIGH PERFORMANCE GLOW PLUG SP-406 FACTORY TEAM CAP, BLUE SP-407 FACTORY TEAM CAP, BLACK GREEN SLIME SHOCK LUBE FACTORY TEAM TURNBUCKLE WRENCH GT FACTORY BLUE TITANIUM TURNBUCKLES, complete set FACTORY BLUE TITANIUM TURNBUCKLE, 1.30 pr FACTORY BLUE TITANIUM TURNBUCKLE, 2.62 pr GT TITANIUM TURNBUCKLE/HINGE PIN COMBO, complete set FACTORY TEAM BODY MOUNTING HOLE REAMER CHASIS LEAD WEIGHTS, 1/4 OZ FACTORY TEAM LOCKING ADHESIVE 10ml GT TITANIUM HINGE PIN SET, complete B FACTORY BLUE INLINE FRONT AXLES pr CHASSIS PROTECTIVE SHEET UNOBTAINIUM SHOCK SHAFT 1.32 Stroke, rear UNOBTAINIUM SHOCK SHAFT 1.02 Stroke, front FACTORY BLUE 4-40 LOCKNUTS FACTORY BLUE 8-32 LOCKNUTS COMPLETE TUNING GUIDE: GT FRONT SHOCK TOWER, GRAPHITE B ALUMINUM BRAKE ADAPTER, BLUE REAR SHOCK TOWER, GRAPHITE FACTORY BLUE ALUMINUM SCREW KITS PRE-FILTER TREATMENT SILVER.190 CARB RESTRICTER, for OS Max engines BLUE.180 CARB RESTRICTER, for OS Max engines BLACK.170 CARB RESTRICTER, for OS Max engines 1 3.0

6 7740 BLACK TUNED PIPE CHROME TUNED PIPE BLUE TUNED PIPE PURPLE TUNED PIPE BLACK PULL START MANIFOLD CHROME PULL START MANIFOLD BLUE PULL START MANIFOLD PURPLE PULL START MANIFOLD BLACK NON PULL START MANIFOLD CHROME NON PULL START MANIFOLD BLUE NON PULL START MANIFOLD PURPLE NON PULL START MANIFOLD ONE-PIECE GT BLUE CHASSIS X 1/2 SOCKET HEAD CAP SCREW B BLUE SERVO SAVER TUBE & NUT NARROW GAS TRUCK BODY II PRO-LINE F10 GT BODY with spoiler (kit body) TRUCK REAR SPOILER Contact Pro-Line for other bodies for the GT FACTORY TEAM GT, non pull start FACTORY TEAM GT pull start RC10GT TEAM KIT, pull start RC10GT TEAM KIT, non pull start RTR GT GAS TRUCK PTFE SEALED BEARING KIT for GT, B3, T3 set GT PTFE SEALED BEARING KIT (with clutch bearings) set RTR RUBBER SEALED BEARING KIT set GT RUBBER SEALED BEARING KIT set REAR WHEEL, one piece, lightweight. White (Fits only #6374 or #7362 axles) pr B TRUCK REAR WHEELS, 1 piece, 2.2", black. (Fits only #6374 or #7362 axles) pr Y TRUCK REAR WHEELS, 1 piece, 2.2", fluorescent yellow. (Fits only #6374 or pr 7.00 #7362 axles) 7803 NEW TRUCK REAR WHEEL, 1 piece, 2.2" white (fits MIP CVD s or #7367 pr 7.00 rear axles only.) 7803B NEW TRUCK REAR WHEEL, 1 piece, 2.2" black (fits MIP CVD s or #7367 pr 7.00 rear axles only.) 7803Y NEW TRUCK REAR WHEEL, 1 piece, 2.2" fluorescent yellow (fits MIP CVD s pr 7.00 or #7367 rear axles only.) 7822 REAR TIRE, PROLINE - XTR-M2 compound, "Mini Pin" design, 2.2" w/foam pr 17.9 inserts 7824 REAR TIRE, PRO-LINE M2 compound, "Bow Tie" design, with foam inserts. pr ". New standard tire for Truck kits 7842 WIDE FRONT WHEEL, one piece, lightweight pr B TRUCK FRONT WHEELS, 1 piece, 2.2", black pr Y TRUCK FRONT WHEELS, 1 piece, 2.2", fluorescent yellow pr FRONT TIRE, PRO-LINE M2 compound, "Edge" design, 2.2" w/foam inserts pr TRUCK TIRE INSERT, white pr FACTORY TEAM TURNBUCKLE WRENCH FACTORY TEAM BODY MOUNTING HOLE REAMER ALLEN WRENCH SET, 3/32", 1/16",.00,.03 set ASSOCIATED MOLDED TOOL SET. Wrenches to install 11/32, ¼, and 3/16 set 4.0 nuts, adjust 1/8 and 3/16 turnbuckles, and install and remove Associated shock caps " ALLEN DRIVER, clear anodized alum. hex handle, precision ground

7 698 1/16" ALLEN DRIVER, black anodized alum. hex handle, precision ground /64" ALLEN DRIVER, blue anodized alum. hex handle, precision ground /32" ALLEN DRIVER, gold anodized alum. hex handle, precision ground mm ALLEN DRIVER, green anodized alum. hex handle, precision ground mm ALLEN DRIVER, purple anodized alum. hex handle, precision ground " REPLACEMENT TIP, precision ground /16" REPLACEMENT TIP, precision ground /64" REPLACEMENT TIP, precision ground /32" REPLACEMENT TIP, precision ground mm REPLACEMENT TIP, precision ground mm REPLACEMENT TIP, precision ground 1.0 SP-42 T3/GT T-SHIRT. T3 printed on front & GT on back in full color on 100% cotton Specify M, L, XL. SP-42 XXL T3/GT T-SHIRT. T3 printed on front & GT on back in full color on 100% cotton SP-406 FACTORY TEAM CAP. Low crown style. Heavy brushed twill cap has contrasting stitch. Buckle back adjustable. One size fits all. Blue color. SP-407 FACTORY TEAM CAP. Black color RC10GT DECALS, fluorescent red and yellow with GT in white smoke ASSOCIATED BUMPER STICKERS, 1 large, 1 small. Red, white & blue TEAM ASSOCIATED logo decal sheet, black TEAM ASSOCIATED logo decal sheet, white AE logo decal sheet FACTORY TEAM DRIVER DECAL, 10 x FACTORY TEAM LOGO DECAL SHEET ASSOCIATED LOGO DECAL SHEET TRUCK DECAL SHEET, for the #6122 body RC10GT GAS TRUCK DECAL SHEET, 4 color Mylar SP-41 ASSOCIATED CAR CARRIER BAG. Heavy duty reinforced nylon with brass zipper. (Boxes not included.) SP-100 ASSOCIATED CAR CARRIER BOXES. Fits inside #SP-41 bag. Three 24 x 12 set 1.00 x 6 inner boxes fit into one double thickness box with locking end flap. (Bag not included.) Due to its large size, add $1.00 to shipping charges. SP-101 INNER BOXES. Three 24 x 12 x 6 inner boxes. set.2

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are