LP Gas Hose Couplings and Adapters

Transcription

1 LP Gas Hose Couplings and Adapters female Acme filler hose couplings Acme x NPT adapters Products meet or exceed the requirements of Compressed Gas Association (CGA), the National Fire Protection Association (NFPA), the Canadian Gas Association, American Society of Mechanical ngineers (ASM) and Underwriters Laboratories (UL) Brass Male Acme x MNPT Adapters Male Acme thread 1¾" 2¼" 3¼" M217 M233 M03-16 Brass Male NPT thread 1¼" 1¼" 2" M217 M233 M03-16 Brass Male Acme x FNPT Adapter $ M22-16 Male Acme thread 1¾" 3¼" Female NPT thread 2" M214 M22-16 Brass $ Steel Male Acme x MNPT Adapters Male Acme thread 1¾" 2¼" 3¼" M217S Male NPT thread 1¼" 1¼" 2" M03S-16 Steel M217S M233S M03S-16 $ Steel Male Acme x FNPT Adapter M22S-16 Steel Male Acme thread Female NPT thread 3¼" 2" M22S-16 $2. 1

2 LP Gas Hose Couplings and Adapters Female Acme x MNPT Filler Couplings, Brass Nut M112 M130 M1 Female Acme thread Male NPT thread Material 1¾" 2¼" 2¼" 3¼" 1¼" 1¼" 2" nut, nipple nut, nipple nut, nipple nut, nipple M112 M1 M1S M130 Female Acme x MNPT Filler Couplings, Steel Nut $ M112S M130S M121S Female Acme thread Male NPT thread Material 1¾" 2¼" 3¼" 1¼" 2" Clamp sections and hose barbs are made of and ductile iron. nut and nipple nut and nipple nut and nipple Acme Gaskets Clamp Style Hose Couplings M112S M121S M130S $ Material 1¾" 2¼" 3¼" nitrile nitrile nitrile MW2 MW MW6 $ The 32B and 32S size offers a female Acme swivel to eliminate the need to add additional weight and bulk to the hose assembly. Hose Barb 1¼" 1½" 2" 2" 2" M3162- Wrench M B Thread Material MNPT 1¼" MNPT 1½" MNPT 2" MNPT 3¼" female Acme 3¼" female Acme nipple with 2 piece ductile iron clamp nipple with 2 piece ductile iron clamp nipple with 2 piece ductile iron clamp nipple with 2 piece ductile iron clamp nipple and nut with 2 piece ductile iron clamp nipple and nut with 2 piece ductile iron clamp M M3162- M M M B M S $ Aluminum Description Acme spanner wrench for 2¼", 3¼" and 4¼" fittings MP1B $93. 2

3 LP Gas Hose Couplings and Adapters Female Acme x Male Acme Adapters M612 M612S Female Acme thread Male Acme thread Material 3¼" 3¼" 1¾" 1¾" M612 M612S $ Metal Acme Caps M229 M441F Female Acme thread Description 1¾" 1¾" 2¼" 2¼" 3¼" 3¼" cap with ring and chain, cap with ring and chain, cap with knob plug and chain, cap with knob plug, ring, chain, cap knob with ring and chain, cap with knob plug, ring and chain, Plastic Acme Caps M229-1 M229S-1 M431F-1 M431FS-1 M441F-1 M441FS-1 $ M9 M9-NH3 Female Acme thread Description 1¾" 1¾" cap with ring and chain, yellow plastic cap with chain assembly, for anyhydrous service Plastic Dust Plugs M9-1 M9-NH3-1 $ M179 M180 M181 Male Acme thread Description 1¾" 2¼" 3¼" plug with dust seal and chain assembly, yellow plastic plug with dust seal and chain assembly, yellow plastic plug with dust seal and chain assembly, yellow plastic M179-1 M180-1 M181-1 $

4 Ground Joint Hammer Couplings Ground Joint Type - rounded head of stem fits concave inserts in spuds for superior sealing. metal-to-metal copper seat seal plated and / or iron for use with Boss clamps Style Hose ID and NPT s Coarse Nut Thread complete female stem wing nut Plated Steel Iron Compact Heavy duty 1-31/64" OD x 8 TPI 1-47/64" OD x 8 TPI GDF6 GDF8 GDF GDF12 $ GBA4 GBA46 GBB18 GBB11 $ J47 J47 DLB12 DLB12 $ female spud male spud double spud Style NPT s Coarse Spud Thread Plated Steel w/ copper seat Plated Steel w/ copper seat Plated Steel w/ copper seat Compact Heavy duty 1-31/64" OD x 8 TPI 1-47/64" OD x 8 TPI GJ6 GJ GDL8 GDL13 $ GJ60 GJ0 GDL7 GDL $ GJ7 GJ7 GDL2 GDL2 $ rated to 10 PSI at ambient temperature (70 F) use with Boss clamps, see page 99. King 4 - Lug Quick-Acting Couplings 1¼" 1½" 2" Hose nds Female NPT nds Washer Warning: Not to be used for steam service. Caution: Must use safety clips. Safety clips are same size for both 2-lug and 4-lug Universal Couplings, see page 9. Iron Brass Opt Qty AM16 $26.00 AB16 1 $ AM AB AM AB Item will be discontinued when stock is depleted. 1¼" 1½" 2" Iron Brass Opt Qty AM18 $26.60 AB18 1 $69. 2 AM AB AM AB Item will be discontinued when stock is depleted. Rubber Washer AWR14 $4.30 4

5 Sand Blast Couplings Sand blast couplings are designed for use on sand blast hose. supplied with screws nozzle holders have 1¼" NPSM thread rated to 1 PSI at ambient temperature (70 F) Abrasive blasting equipment must have hose safety cables (page 1) or hose coupling safety locks. Installation: 1) nds of hose must be cut square to fit snug against metal end. 2) Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180 from first to ensure best centering. 3) After all screws have been placed, check tube opposite screws to be sure screws have not penetrated completely through. 4) On quick couplings, insert safety clips Quick Couplings Hose 1-1- Hose OD 1-1-7/8" 2-/32" 2- Brass Aluminum BSB7 BSB0 BSB12 BSB10 $ ASB7 ASB0 ASB12 ASB10 $ Nozzle Holders Hose 1-1- Hose OD 1-1-7/8" 2-/32" 2- Brass Aluminum BNH7 BNH0 BNH12 BNH10 $ ANH7 ANH0 ANH12 ANH10 $ Threaded Couplings 1-1- Brass Aluminum BSC12 BSC10 $ ASC12 ASC10 $ Description SBG USBG SBCS Replacement Parts black nitrile replacement gasket urethane replacement gasket replacement screw $

6 King Universal Couplings /8" Hose nds may use with King ferrules Iron Opt Brass Opt 316 Stainless Steel * Qty * Qty * AMH AM1 AM AM6 AM11 $ Male NPT nds ABH AB1 1 AB AB6 1 AB11 1 $ RAMH RAM1 --- RAM6 RAM11 $ Iron Opt Brass Opt 316 Stainless Steel * Qty * Qty * AMB1 AMB AM2 AM7 AM12 $ Female NPT nds ABB1 ABB AB2 1 AB7 1 AB12 1 $ RAMB RAM2 RAM7 RAM $ Iron Opt Brass Opt 316 Stainless Steel * Qty * Qty * AMC1 AMC AM3 AM8 AM13 $ ABC1 ABC AB3 1 AB8 1 AB13 1 $ RAMC RAM3 RAM8 RAM $ Blank nds Iron Opt Brass Opt 316 Stainless Steel * Qty * Qty * AM0 $ AB0 1 $2. 2 RAM0 $0.30 Triple Connections Iron Opt Brass Opt * Qty * Qty AM $ AB 1 $ global investment cast * Prices for Universal couplings listed above include safety clip (not pictured). The use of an King safety clip or wire type retainer is necessary to ensure King universal couplings will not become accidentally disconnected. This guarantees the fittings are properly connected because the safety pin will not go through the holes in mating flanges until couplings are locked in place. Only one King safety clip or wire type retainer is required for each King universal coupling. To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose. See page 6 for Whip Hose safety information. King is rated to 10 PSI at ambient temperature (70 F). Standard King fittings come with AWR4 rubber washers. King meets pressure requirements as specified in A-A-93 commercial item description superseding Mil Spec. WWC-633D. King is for air and water service only Warning: Never use any King coupling for steam service! None of Dixon's catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose. 6

7 Global King Universal Couplings Hose nds Plated Steel * GAM1 $3.30 GAM GAM11 4. Pkg Qty Male NPT nds Plated Steel * GAM2 $3.80 GAM GAM12 4. Pkg Qty Female NPT nds Plated Steel * GAM3 $3.80 GAM GAM Pkg Qty Blank nd Plated Steel Pkg * Qty --- GAM0 $4. 2 * Prices for Universal couplings listed above include safety clip. couplings are supplied with rubber washers Triple Connection Plated Steel Pkg * Qty --- GAM $8.0 2 Global King 4 - Lug Quick-Acting Couplings rated to 10 PSI at ambient temperature (70 F) use with Boss clamps, see page 99. 1¼" 1½" 2" GAM16 GAM21 GAM26 Plated Steel Hose nds Warning: Not to be used for steam service. Caution: Must use safety clips. Safety clips are same size for both 2-lug and 4-lug Universal Couplings, see page 9. $ Opt Qty 2 2 1¼" 1½" 2" GAM18 GAM23 GAM28 Female NPT nds Plated Steel $ Opt Qty 2 2 King is for air and water service only Warning: Never use any King coupling for steam service! None of Dixon's catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose. 7

8 King Ferrules Offers a low profile streamline appearance with maximum retention. lightweight can be crimped See page 671 for crimp recommendations and ferrule OD ranges. Ferrule ID Plated Steel CCF0906 CCF11 CCF1149 CCF1190 CCF1218 CCF1246 CCF1438 CCF1469 CCF100 CCF131 $ King Clamps Hose OD Plated Iron From: To: 44/64" 1-8/64" 1-/64" 1-32/64" 6/64" 1-12/64" 1-/64" 1-32/64" 1-2/64" CD 3 A4 A9 3 A 2, 3 A14 $ Opt Qty Torque recommended torque rating in ft. lbs. 2 can be used with AM6 and AM11 3 global investment cast carbon Torque values for clamps are based on dry bolts. The use of lubricant on bolts will adversely effect clamp performance. King is for air and water service only Warning: Never use any King coupling for steam service! None of Dixon's catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose. 8

9 King Accessories The use of an King safety clip or wire type retainer is necessary to ensure couplings will not become accidentally disconnected. This guarantees the fittings are properly connected as the pin will not go through the holes in the mating flanges until couplings are locked in place. Only one King safety clip or wire type retainer is required for each King universal coupling. same size for all coupling sizes Standard Safety Clip Wire Diameter Pkg Qty heavy duty oversized.080 AC1 $0.2 2 King Safety Pins Wire Diameter same size for all coupling sizes AKSP1 AKSP2 $ Wire Diameter.072 AC7 $1.9 Stainless Steel Clip synthetic cord same size for all coupling sizes Pkg Qty ACL8 $ Lanyards 304 stainless breaking strength: 160 lbs. overall length: 7" eye to eye LR7 $7. same size for all coupling sizes rubber temperature range: - F to 160 F neoprene temperature range: - F to 190 F neoprene is oil resistant Washers Rubber Pkg Qty AWR4 $0. 0 Neoprene Pkg Qty AWS6 $

10 King with Ferrules Universal design provides quick, easy and effective coupling of air hose. xclusive interlocking ferrule can be crimped or swaged to achieve maximum coupling sealing and retention with a low profile streamline appearance. For crimp or swage diameter recommendations see page 670. iron and stainless King with carbon ferrules can be crimped or swaged rated to 10 PSI working pressure at ambient temperature (70 F) for air and water service only Hose OD Iron Stainless Steel From: To: 4/64" 1-4/64" 1-18/64" 1-30/64" 1-2/64" 1-22/64" 1-34/64" 1-46/64" AM1WF AM6WF AM11WF-1 AM11WF $ RAM6WF $ King with Gauge Port drilled with ¼" NPT for mounting gauge gauge sold separately Iron Stainless Steel AM7T $.1 RAM7T $73.00 In-Line Ball Valve with King nd easily maintained in line valve one piece ball and stem positive on/off Iron VAM7 1 $66. 1 Item will be discontinued when stock is depleted. King Universal Swivels These universal swivel fittings interchange with other King fittings and include a heavy-duty, free-turning joint that swivels under pressure to prevent hose kinking. Working pressure: 10 PSI at ambient temperature (70 F). For air and water service only. hose end male NPT female NPT Iron Iron Iron --- AM6SWIV --- $64.00 AM2SWIV AM7SWIV $ AM8SWIV --- $8.00 King is for air and water service only Warning: Never use any King coupling for steam service! None of Dixon's catalog information is to be interpreted to mean that this type of coupling is suitable for use on steam hose. 1

11 Surelock Quick Acting Couplings The Surelock coupling is a multi-purpose coupling for water and air, commonly used in construction and mining. This coupling excels where ease, economy, safety and speed are paramount. They are stocked in sizes from through 2". The pressure activated gasket allows easy coupling (less than 1 lbs. of force is required to connect the coupling) and gaskets seal upon introduction of line pressure. Safety pin is supplied with each coupling and is required as a safety precaution. Specifications: body: SG iron AS bellow seal: natural rubber (patent pending), other seal material available upon request working pressure: 00 PSI at ambient temperature (70 F) Hose nds Head Pkg Qty small medium 1-2" SL038H SL00H SL07H SL0H SL10H SL0H $ Male NPT nds Head Pkg Qty small medium 1-2" SL038M SL00M SL07M SL0M SL10M SL0M $ Female NPT nds Head Pkg Qty small medium 1-2" SL038F SL00F SL07F SL0F SL10F SL0F $ Surelock Quick Acting Couplings with Ferrules Universal design provides quick, easy and effective coupling of air hose. xclusive interlocking ferrule can be crimped or swaged to achieve maximum coupling sealing and retention with a low profile streamline appearance. See page 672 for crimp recommendations. Dixon recommends that all hose assemblies be tested in accordance with RMA testing procedures. rated to 00 PSI working pressure at ambient temperature (70 F) for air and water service only Head small medium 1-2" Hose OD From: 4/64" 1-4/64" 1-30/64" 2-1/64" 2-41/64" To: 1-2/64" 1-22/64" 1-46/64" 2-8/64" 2-48/64" SL00CR SL07CR SL0CR SL10CR SL0CR $

12 Surelock Accessories Blank nds Head Pkg Qty small medium * ½" to 1½" to 2" SL00 SL01 $ small blank end medium blank end * Three Way Connectors * medium blank end comes with NPT pipe plug Head Pkg Qty small medium * ½" to 1½" to 2" SL09 SL $ small three way connector medium three way connector * * medium three way connector comes with NPT pipe plug Standard Natural Rubber Seals Head Pkg Qty small medium ½" to 1½" to 2" SLR1 SLR2 $ SLR1 SLR2 Safety Locking Pin Warning: The use of a safety locking pin is necessary to ensure that Surelock couplings will not become accidentally disconnected. This guarantees that the fittings are properly connected as the pin will not go through the holes in both couplings until the couplings are locked into place. Pkg Qty SLP1 $ Seal Insertion Tools When inserting in quantity, seal insertion tools ensure correct alignment of standard Surelock seals. Head small medium to 1-1- to 2" IT0SL IT0SL $ small tool medium tool In-line Strainer and Lubricator To ensure proper operation the lubricator should be installed within feet of the tool to be lubricated. To adjust the lubricator oil flow: Remove the plug. Using a small screw driver turn the jet clockwise to decrease flow, or counter-clockwise to increase flow When adjusted correctly the spray of oil exhausting should cover an area of -12" in diameter when held 18" away from the subject line strainer lubricator Description Pkg Qty to 1- FNPT in-line strainer FNPT x FNPT in-line lubricator SLS1 SLL1 $

13 Dix-Lock is rated to 300 PSI at ambient temperature (70 F) Dix-Lock Quick Acting Couplings Body Hose Shank Material Opt Qty Male Head x Hose nd plated plated plated plated plated 303 stainless QM1 QM2 QM3 QM4 QM QB2 QB3 QB4 QB QSS4 $ Body Hose Shank Material Opt Qty Female Head x Hose nd plated plated plated plated plated 303 stainless QM QM21 QM22 QM23 QM2 QB21 QB22 QB23 QB2 QSS23 $ Body NPT Thread Material Opt Qty Male Head x Male NPT nd plated plated plated plated plated 303 stainless QM40 QM41 QM42 QM43 QM4 QB41 QB42 QB43 QB4 QSS43 $ Body NPT Thread Material Opt Qty Female Head x Male NPT nd plated plated plated plated plated 303 stainless QM60 QM61 QM62 QM63 QM6 QB61 QB62 QB63 QB6 QSS63 $

14 Dix-Lock is rated to 300 PSI at ambient temperature (70 F) Dix-Lock Quick Acting Couplings Male Head x Female NPT nd Body NPT Thread Material Opt Qty plated plated plated plated 303 stainless QM81 QM82 QM83 QM8 QB81 QB82 QB83 QB8 QSS83 $ Female Head x Female NPT nd Body NPT Thread Material Opt Qty plated plated plated plated 303 stainless QM1 QM2 QM3 QM QB1 QB2 QB3 QB QSS3 $ Male Locking Head x Hose Shank Body Hose Shank Material plated plated QM33 QM44 QB33 QB44 $ Male Locking Head x Male NPT Body NPT Thread Material plated plated QM66 QM88 QB66 QB88 $ Positive safety lock With locking nut in place sleeve cannot be moved to open coupling. Dix-Lock Gaskets Body QBM1 QBM2 Buna-N $

15 Dix-Lock Converter Body Steel Opt Qty ½" QM0 $ Dix-Lock Cap Body Brass Opt Steel Opt Qty Qty ½" QBCAP $ QMCAP $ Dix-Lock Quick-Acting Couplings with Ferrules rated to 300 PSI working pressure at ambient temperature (70 F) for crimp recommendations see page 669 also available in stainless, contact Dixon for further information Body Hose ID From: Hose OD To: Material Male Head 27/32" 1-/32" 27/32" 1-/32" 1-1/32" 1-11/32" 1-1/32" 1-11/32" plated plated QM3WF QM4WF QB3WF QB4WF $ Body Hose ID From: Hose OD To: Material Female Head 27/32" 1-/32" 27/32" 1-/32" 1-1/32" 1-11/32" 1-1/32" 1-11/32" plated plated QM22WF QM23WF QB22WF QB23WF $ Body Hose ID From: Hose OD To: Material Male Locking Head 27/32" 1-/32" 27/32" 1-/32" 1-1/32" 1-11/32" 1-1/32" 1-11/32" plated plated QM33WF QM44WF QB33WF QB44WF $

16 interchanges with National A type, Dixon Quick Coupling P type and Thor PHC series couplings. PM and PF series must be used with mating locking sleeve fittings. trivalent chrome plated Dual Lock Quick-Acting Couplings spring loaded interlocking engagement full opening permits full flow to tool optional locking key prevents sleeve retraction 300 PSI working pressure at ambient temperature (70 F) Male Pipe Thread Body NPT Thread Material Opt Qty Must be used with locking sleeve fittings below. plated plated plated plated 303 stainless PM6 PM8 PM12 PM16 PMB8 PMB12 PMB16 PM12SS $ Female Pipe Thread Body NPT Thread Material Opt Qty Must be used with locking sleeve fittings below. plated plated plated plated 303 stainless PF6 PF8 PF12 PF16 PFB8 PFB12 PFB16 PF12SS $ Hose nd Barb with Locking Sleeve Body Hose ID Material Opt Qty plated plated plated plated 303 stainless PHL6 PHL8 PHL12 PHL16 PHLB12 PHLB16 PHL12SS $ Male Pipe Thread with Locking Sleeve Body NPT Thread Material Opt Qty plated plated plated 303 stainless PML6 PML8 PML12 PML12SS $ Female Pipe Thread with Locking Sleeve Body NPT Thread Material Opt Qty plated plated 303 stainless PFL8 PFL12 PFL12SS $ Replacement Gaskets Locking Key Buna-N Viton 86 $ $6.16 Body Steel ½" 8231 $1.76 fits couplings with locking sleeve 116

17 Dual Lock Quick-Acting Couplings with Ferrule Dual Lock couplings with ferrules are rated to 300 PSI working pressure at ambient temperature (70 F). trivalent chrome plated coupling with plated ferrule also available in and stainless for crimp recommendations see page 669 Body Hose ID Hose OD From: To: 4/64" 1-/64" 1-2/64" 1-22/64" PHL8WF PHL12WF $ Dual Lock Quick-Acting Couplings with Knurled Flanged Sleeve large, raised collar sleeve permits easier handling when wearing gloves trivalent chrome plated Body Hose ID Opt Qty Hose nd Barb with Knurled Flanged Sleeve PHL6FS PHL8FS PHL12FS $ Body NPT Thread Opt Qty Male Pipe Thread with Knurled Flanged Sleeve PML6FS PML8FS PML12FS $ Body NPT Thread Opt Qty Female Pipe Thread with Knurled Flanged Sleeve PFL8FS PFL12FS $ dual action valve, ideal for compressor applications female NPT threads non-vented rated to 600 PSI WOG vented rated to 12 PSI CWP (Cold Working Pressure) Dual Y Valves Female NPT Inlet (1) 1¼" Non-Vented Female NPT Brass Outlet (2) ¾" BBV0DW ¾" BBV12DW $ Female NPT Inlet (1) 1¼" Vented Female NPT Brass Outlet (2) ¾" BBV0DWV ¾" BBV12DWV $ converts a single supply source to a dual outlet Compressor Y Female NPT Male NPT Iron Inlet (1) Outlet (2) ¾" Y07 $

18 Steel 300 Nipples Hose NPT Male Nipple (hose shank x male NPT) Zinc Plated Steel $ Opt Qty Female Nipple (hose shank x female NPT) Zinc Plated Steel Hose NPT $ Opt Qty Steel 300 Nipples with Ferrules xclusive interlocking ferrule can be crimped or swaged to achieve maximum coupling sealing and retention. The 300 nipples with ferrules have a low profile, streamline appearance. For crimp dimensions see page 669. zinc plated 300 nipple with carbon ferrule can be crimped or swaged-on rated to 600 PSI working pressure at ambient temperature (70 F) for air and water service only Hose OD Steel From: To: 4/64" 1-/64" 1-30/64" 8/64" 1-14/64" 1-34/64" 312WF 314WF 318WF $ The Importance of Whip Hose The constant vibration created by air tools, like air drills and pavement breakers, is destructive to air hose couplings, especially the quick-acting type. To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose. To construct a whip hose, connect one end of a short (3' to ')air hose to the air tool using a 300 type nipple. Connect the other end of the hose to the air supply using the standard quick-acting coupling. The heat-treated 300 nipple will withstand vibration far better than the standard coupling and provide a safer connection. The whip hose should remain permanently connected to the tool. 118

19 In-Line Lubricators Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms. ach time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor. Installation is recommended within 2 feet of the tool to be lubricated. Refer to the arrow for proper air flow direction. Transparent sight disc allows visual inspection of oil level. Oil flow regulated by screwdriver screw adjustment. Minimum flow rate is 30. Not recommended for constant flow applications. For reciprocating tools only. Type of oil to use: Use any petroleum-base, non-detergent light weight oil (SA /10SSU) which will readily break up into a mist, i.e., Mobil DT light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. See page 137 for air tool lubricant. NPT s ½" ¾" ¾" Oil Capacity 1.4 fluid ozs. 3.7 fluid ozs fluid ozs fluid ozs. Max. Working Pressure at ambient temperature (70 F) 00 PSI 0 PSI 300 PSI PSI Flow at 70 PSI Aluminum PL300 PL400 PL400L PL00 $ Replacement Parts Description Description (A) oil adjustment valve assembly (B) valve gasket (C) fill plug $ (D) fill plug O-ring () sight disk (F) sight disk seal (G) sight disk lock nut $ A B C D G F In-Line Filters Designed specifically for the protection of small air tools, such as impact wrenches, nut runners, grinders and screwdrivers. The all-anodized, lightweight aluminum housing is compact and can be used directly before the air tool. maximum operating pressure: 00 PSI operating temperatures: 3 F to 0 F air flow is 140 Male Overall Weight Aluminum Diameter NPT Length Lbs. 3-13/16" M $68.00 standard element is 40 micron, which ensures minimum pressure drop elements can be replaced quickly In-Line Lubricator with Filter Combination unit consists of 9076M particle filter with 40 micron sintered bronze element and PL400 (3.7 ounce) or PL400L (11.0 ounce) lubricator. NPT s ¾" ¾" Oil Capacity 3.7 fluid ozs fluid ozs. Max.Work. Press. at ambient temp. (70 F) 0 PSI 300 PSI Aluminum PL400WF PL400LWF $ Base can be fitted to any existing PL lubricator, keeps lubricator from flipping or rolling over, ensuring that it provides continuous lubrication to the downstream air tool. Description leveling base for PL300 leveling base for PL400 leveling base for PL00 In-Line Lubricator Base Aluminum LB300 $1.00 LB LB

20 King Safety Cables When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators. King safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose. Thoroughly tested with years of service. A positive safeguard for air hose connections - helps you meet today's safety standards. King safety cable must be installed in the extended position (no slack). Features: hose-to-hose or hose-to-rigid outlet King cable is the low cost answer to eliminate injuries caused by broken air hose connections highly resistant to rust and corrosion no tools needed - easy to install and remove maximum working pressure: 0 PSI Hose nd Tool nd Hose nd Hose nd Style WSR, for hose-to-tool service Style W, for hose-to-hose service Max. Work. Steel Stainless Steel Max. Work. Steel Stainless Steel Hose ID Cable Length Hose ID Cable Length Press. PSI Press. PSI ½" - 1¼" ½" - 2" 1½" - 3" 4" 3/16" ¼" 28" 38" 44" WSR1 WSR3 WSR2 WSR4 $ WSR1SS --- WSR2SS --- $ ½" - 1¼" ½" - 2" 1½" - 3" 4" 3/16" ¼" 28" 38¼" 44" Note: Cables are shipped with safety restraint labels attached. Labels are not pictured. King Safety Cable Options WB1 WB3 WA2 WA4 $ WB1SS --- WA2SS --- $ WSR1 WSR1 with stainless marine eye correct installation WB1C WB1 with safety clip and lanyard Cable Description WSR1C WB1C WSR1 WA2B incorrect installation WSR1 with safety clip and lanyard used to lock King couplings WB1 with safety clip and lanyard used to lock King couplings WSR1 with stainless safety marine eye used to connect safety cable to a bolt on tool WA2 with bronze/copper ferrule for special environmental conditions Max. Working Pressure PSI $ See page for OSHA regulations. Spring Guard Protects hose against the effects of flexing at its most vulnerable point - immediately behind the coupling. nd 'tang' allows end guard to be secured under a clamp or ferrule. Made of half-round galvanized wire to fit hose OD's from 7/8" to 3-. Guard ID ¾" 1¼" 1½" 1¾" 2" 2½" 3" Hose OD Wire Over All Tang Approx. Galvanized Steel From To Gauge Length Length # of Coils 7/8" 1/16" " 2-3" 1/16" " 2-3" " 12" 14" 14" 16" 16" 18" 18" 1 2" 2" 2" 2" 2" 2" SGC SGC SGC SGC SGC SGC SGC SGC $

21 ASM Receiver Manifold Compressor Receiver: built to ASM Code, National Board registered 7 gallon capacity all openings are female NPT thread conforms to OSHA standards and painted safety orange 0 PSI working pressure 1217AR-4AK 1217AR-4FR 40" ,, 6 9,, 11 Three holes located 2" 180 of this side 2" 8 / Locations 1217AR FRAM Location 1 Location 2 Location 3 Locations 4,, 6, 9,, 11 Location 7 Location AR-4AK 1217AR-4PHL 17" 12" Dixon 1217AR-4AK air receiver manifold assembly with King outlet ports includes the following: Description Price ASM compressed air receiver 1 protective frame 1 HB2F6M ¾" male x ¼" female hex bushing 1 GL PSI gauge 1 HB2F4M ½" male x ¼" female hex bushing 1 SV0 safety pop-off valve 1 GM28 2" male spud 1 B27SC wing nut cap 6 HB7G male x ¾" female bushings 6 BCN7 ¾" hex nipples 6 BBLV7 ball valves 6 SCVS6 safety shut-off valves 6 AM7 King universal couplings 4 S40 4 street elbow (1 each in locations 4, 6, 9 and 11 only) 1 HB7 2" male x ¾" female bushing 1 BCN7 ¾" hex nipples 1 BBLV7 ball valve 1 SCVS6 safety shut-off valve 1 AM7 King universal coupling 1 HB2F4M ½" male x ¼" female hex bushing 1 D04 ¼" drain cock Labor cost for assembly of complete unit 7 gallon ASM compressed air receiver manifold complete assembly with King 7 gallon ASM compressed air receiver manifold complete assembly with Dual Lock $ $ Tank and frame only 1217AR-4FR 7 gallon ASM compressed air receiver with frame only --- $

22 ASM Tank with and Watts Filter Designed to remove compressed air contaminants such as water, compressor oil, dirt, pipe scale and water particles from the air supply at the point of entry into the ASM air tank. includes basic 1217AR-4AK ASM manifold assembly F602-16WJR 2" auto drain filter with 26 ounce metal bowl and related plumbing installed on the inlet port of the ASM air tank supply hose connects directly to GM28 2" male spud on the filter air inlet. includes a B27SC wing nut cap with a chain ASM air tank with fittings and Watts filter 2" inlet, ¾" outlets 1217AR-4AKWF $ Wilkerson Combination Unit with Protective Frame Provides downstream air preparation with protective frame and includes the following components: C31-08AMB FRL with metal bowls and auto drain filter FBV0 ball valve and AM12 air king on inlet port BBV0DTW 2-way ball valve installed between regulator and lubricator provides option for non-lubricated air heavy duty frame protects air prep components operating conditions: maximum pressure: PSIG temperature range: 40 F to 10 F : 3 FRL with protective frame C31-08FRAM $

23 Safety Check Valves Flow Direction Check Valve in Open Position Check Valve in Closed Position Features: high flow valve to provide optimum performance controls excess air flow () in only one direction automatically senses change in air flow and shuts off the flow in the event of a surge in excess of valve flow rating thus preventing hose whip conforms to OSHA regulation (b) (7) requiring a safety device at the source of the air supply and at branch air lines applications include temporary plant/factory air, construction sites, shipyards or utilities not for use in applications where 0% of the available air is required, i.e. sand blast, pile driving rigs,expansion joint blow down pipes, etc. does not prevent backflow Construction: solid body and valve stainless spring and roll pin maximum working pressure: PSI maximum temperature: F Use: Safety check valves operate by using the pressure differential across the valve to operate the valve and spring assembly. The pressure differential is directly related to the flow of air () through the valve. When the pressure differential is within the operating limits - below the cutoff flow - of the unit, the force on the valve exerted by the spring is greater than that caused by the pressure differential (see "Open Position" graphic above). The valve remains open and normal operation continues. When the pressure differential is above the cutoff limit, the force on the valve exerted by the pressure differential is greater than the force exerted by the spring, and the valve closes (see the "Closed Position" graphic above). After the repair is made, normal operation is automatically enabled when pressure across the valve equalizes through the bleeder hole. The valve spring size can be specified by determining the air flow during normal operation and by estimating the air flow if a failure or rupture occurs. NPT and Hose ID Cut-off Flow Rate ( at 90 PSI) NPT and Hose ID Cut-off Flow Rate ( at 90 PSI) SCVL2 SCVM3 SCVS3 SCVM4 SCVS4 SCVL6 SCVM6 SCVR6 SCVJ6 SCVS6 SCVH6 SCVL8 SCVM8 SCVS8 SCVH $ " 3" SCVL SCVM SCVS SCVH SCVL12 SCVM12 SCVS12 SCVH12 SCVL16 SCVM16 SCVS16 SCVH16 SCVL24 SCVS24 SCVH $

24 Actual Profile Chart Industrial Series body size body size body size * body size Automotive Series body size body size body size * ARO Series 2 3 Lincoln Series Lincoln * ½" industrial series may also interchange with ½" automotive series Ball Swivel Plugs material: - threaded portion is - plug and nut portion is nickel-plated hardened rated PSI Male NPT Ball Swivel x Industrial Plug Opt Qty DCP21SWIV $13.3 Male NPT Ball Swivel x ARO Plug Opt Qty DCP37SWIV $13.3 Male NPT Ball Swivel x Automotive Plug Opt Qty DCP1SWIV $

25 Angled Swivel Industrial Interchange Plugs Angled swivel plugs are lightweight and streamlined. They can be used in the automotive and electronics industries, workstations, commercial and residential construction and robotic joints. Helps alleviate carpal tunnel syndrome and back stress resulting in fewer lost time injuries. 360 circular rotation and 4 angled rotation material: - body is nickel-plated - dust cover is polyurethane rated to 14 PSI temperature range: F to 140 F for air service only Body NPT Thread Male Thread DCP21ANSW DCP21ANSW DCP23ANSW DCP2ANSW DCP2ANSW $ Chief Industrial Interchange Quick-Connect Plugs Chief industrial quick-connect plugs are the popular industrial interchange design and will interchange with many other makes. Couplers shut-off when disconnected. rated to 300 PSI temperature range: -40 F to F for air service only interchanges with MIL Spec. MIL-C-49F/A-A-9439 Body NPT Thread Material Flow Rating at 0 PSI Opt Qty Female Pipe Thread 303 stainless 303 stainless 303 stainless 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM DCP21 DCP DCP23 DCP2622 DCP26 DCP2624 DCP1823 DCP18 DCP1826 DCP7024 DCP7026 DCP7028 DCPB DCP23B DCPS DCP26S DCP18S $

26 Chief Industrial Interchange Quick-Connect Plugs Chief industrial quick-connect plugs are the popular industrial interchange design and will interchange with many other makes. Couplers shut-off when disconnected. rated to 300 PSI temperature range: -40 F to F for air service only interchanges with MIL Spec. MIL-C-49F/A-A-9439 Male Pipe Thread Body NPT Thread Material 303 stainless 303 stainless 303 stainless Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Opt Qty DCP21 DCP21 DCP23 DCP2 DCP2 DCP4 DCP1703 DCP17 DCP1706 DCP74 DCP76 DCP78 DCP21B DCP21B DCP23B DCP21S DCP2S DCP17S $ Standard Hose Barb Body Hose ID Material DCP714 /16" 303 stainless 303 stainless 303 stainless Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Opt Qty DCP2142 DCP2143 DCP2144 DCP242 DCP244 DCP24 DCP1744 DCP174 DCP1746 DCP714 DCP7146 DCP7148 DCP2142B DCP2144B DCP2142S DCP244S DCP174S $ Push-On Hose Barb Body Hose ID Material Flow Rating at 0 PSI 70 CFM 70 CFM Opt Qty DCP2142L DCP2144L DCP242L DCP244L $

27 Chief Industrial Interchange Quick-Connect Couplers Chief industrial quick-connect couplers are the popular Industrial Interchange design and will interchange with many other makes. Couplers shut-off when disconnected. rated to 300 PSI temperature range: -40 F to F Body NPT Thread Material 303 stainless 303 stainless 303 stainless * are automatic sleeve Body NPT Thread * are automatic sleeve Material 303 stainless 303 stainless 303 stainless Body Hose ID Material /16" * are automatic sleeve 303 stainless 303 stainless 303 stainless Body Hose ID Material Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Flow Rating at 0 PSI 70 CFM 70 CFM for air service only interchanges with MIL Spec. MIL-C-49F/A-A-9439 Opt Qty Female Pipe Thread DC21 DC DC23 DC2622 DC26 DC2624 DC23 DC DC26 DC7024 * DC7026 * DC7028 * DCS DC26S DCS Opt Qty Male Pipe Thread DC21 DC21 DC23 DC2 DC2 DC4 DC903 DC9 DC906 DC74 * DC76 * DC78 * DC21S DC2S DC9S $ Opt Qty Standard Hose Barb DC42 DC43 DC44 DC2642 DC2644 DC264 DC44 DC4 DC46 DC704 * DC7046 * DC7048 * DC42S DC2644S DC4S $ Opt Qty Push-On Hose Barb DC42L DC44L DC2642L DC2644L $ $ semi-automatic pull sleeve to connect semi-automatic pull sleeve to connect semi-automatic pull sleeve to connect semi-automatic pull sleeve to connect 127

28 Parker z-mate Industrial Interchange Couplers z-mate couplings combine push-to-connect, exhaust-style action with a self-locking valve sleeve to guard against accidental disconnection. Simply follow the direction of the on-off arrow stamped on the yellow chromate valve sleeve. Valve sleeve acts as an integral shut-off valve that allows connection and disconnection at zero pressure. When the sleeve is moved to shut off air flow, it automatically vents downstream allowing for disconnection at zero pressure and eliminating the risk of hose whip. rated to 300 PSI temperature range (standard seals): -40 F to + F Meet ISO 4414 requirements for a controlled pressure release system. not recommended for vacuum service Female Pipe Thread Body Female NPT Material /2 Male Pipe Thread Body Male NPT Material Standard Hose Barb Body Hose ID Material Flow Rating at 0 PSI 70 CFM 70 CFM 10 CFM 10 CFM 0 CFM 0 CFM Flow Rating at 0 PSI 70 CFM 10 CFM 0 CFM Flow Rating at 0 PSI 70 CFM 10 CFM Opt Qty DCS DC23S DC26S DC2624S DCS DC26S DC7026S DC7028S $ Opt Qty DC21S DC23S DC2S DC9S DC76S Opt Qty DC42S DC44S DC2644S DC4S $ $ Push-Lock Hose Barb Body Hose ID Material Flow Rating at 0 PSI 70 CFM 10 CFM Opt Qty DC42LS DC44LS DC2644LS DC4LS $ Legris Automatic Industrial Interchange Safety Couplers composite, non-marring body body size ensures an excellent flow and total security due to disconnection in two steps compatible with industrial interchange plugs Perfectly suited for numerous installations including: - pneumatic tools - blow guns - pneumatic automotive equipment 1. vents plug side 2. disconnects NPT Body male NPT straight body 940U U0618 $ NPT Body female NPT straight body 941U U0618 $

29 Chief Industrial Interchange Quick-Connect Couplers Chief industrial quick-connect couplers are the popular industrial interchange design and will interchange with many other makes. Couplers shut-off when disconnected. rated to 300 PSI temperature range: -40 F to F for air service only interchanges with MIL Spec. MIL-C-49F/A-A-9439 Body NPT Thread Material Flow Rating at 0 PSI Opt Qty Female Pipe Thread 303 stainless 303 stainless 303 stainless 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM DCB DCB23 DCB2622 DCB26 DCB2624 DCB23 DCB DCB26 DC7024 DC7026 DC7028 DCS DCS26 DCS $ automatic push to connect Body NPT Thread Material Flow Rating at 0 PSI Opt Qty Male Pipe Thread 303 stainless 303 stainless 303 stainless 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM DCB21 DCB23 DCB2 DCB2 DCB4 DCB903 DCB9 DCB906 DC74 DC76 DC78 DCS21 DCS2 DCS9 $ automatic push to connect Body Hose ID Material 303 stainless 303 stainless 303 stainless Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM 0 CFM 0 CFM 0 CFM 70 CFM 10 CFM Opt Qty Standard Hose Barb DCB42 DCB44 DCB2642 DCB2644 DCB264 DCB44 DCB4 DCB46 DC704 DC7046 DC7048 DCS42 DCS2644 DCS4 $ automatic push to connect 129

30 Chief Automotive Interchange Quick-Connect Plugs Chief automotive quick-connect plugs will interchange with the popular makes of automotive quick-connect fittings such as Amflo, Dill, Milton and Truflate. There are some makes however, which do not interchange with any others. If you plan to interchange these couplings, make sure you have plug ends with the proper configuration. rated 300 PSI temperature range: -40 F to F Female Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Opt Qty 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM DCP221 DCP2 DCP223 DCP8 DCP6 DCP624 DCP1823 DCP18 DCP1826 $ Male Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Opt Qty 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM DCP1 DCP1 DCP3 DCP7 DCP DCP1703 DCP17 DCP1706 $ Standard Hose Barb Body Hose ID Material Flow Rating at 0 PSI Opt Qty 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM DCP142 DCP144 DCP42 DCP44 DCP1744 DCP174 DCP1746 $ Push-On Hose Barb Body Hose ID Material Flow Rating at 0 PSI Opt Qty 70 CFM DCP142L DCP144L DCP44L $

31 Chief Automotive Interchange Quick-Connect Couplers Chief automotive quick-connect couplers will interchange with the popular makes of automotive quick-connect fittings such as Amflo, Dill, Milton and Truflate. There are some makes however, which do not interchange with any others. If you plan to interchange these couplings, make sure you have plug ends with the proper configuration. rated 300 PSI temperature range: -40 F to F Body NPT Thread Material Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM Opt Qty Female Pipe Thread DC221 $13. 2 DC semi-automatic DC pull sleeve to connect DC DC6 19. DC DC DC 27. DC26 3. Body NPT Thread Material Flow Rating at 0 PSI Opt Qty Male Pipe Thread 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM DC1 DC1 DC3 DC7 DC DC04 DC903 DC9 DC906 $ semi-automatic pull sleeve to connect Body Hose ID Material /16" Flow Rating at 0 PSI 70 CFM 70 CFM 70 CFM 10 CFM 10 CFM 10 CFM Opt Qty Standard Hose Barb DC242 DC243 DC244 DC642 DC644 DC64 DC44 DC4 DC46 $ semi-automatic pull sleeve to connect Body Hose ID Material Flow Rating at 0 PSI 70 CFM 70 CFM Opt Qty Push-On Hose Barb DC242L DC244L DC642L DC644L $ semi-automatic pull sleeve to connect 131

32 Chief ARO Speed Quick-Connect Plugs These semi-automatic quick connects interchange with both the ARO 2 and 3 Design. rated 300 PSI at ambient temperature (70 F) Female Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty 70 CFM DCP38 DCP3823 DCP36 $ Male Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty 70 CFM DCP37 DCP3703 DCP3 $ Standard Hose Barb Body Hose ID Material Flow Rating at 0 PSI Pkg Qty DCP3742 DCP3744 $ Push-On Hose Barb Body Hose ID Material Flow Rating at 0 PSI Pkg Qty DCP3742L DCP3744L $ Chief ARO Speed Quick-Connect Couplers These semi-automatic quick connects interchange with both the ARO 2 and 3 design. Couplers shut-off when disconnected. rated 300 PSI at ambient temperature (70 F) semi-automatic - pull sleeve to connect Female Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty 70 CFM DC38 DC3823 DC36 $ Male Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty 70 CFM DC37 DC3703 DC3 $ Standard Hose Barb Body Hose ID Material Flow Rating at 0 PSI Pkg Qty DC3842 DC3844 $ Push-On Hose Barb Body Hose ID Material Flow Rating at 0 PSI Pkg Qty DC3842L DC3844L $

33 Chief A Series Quick-Connect Plugs Chief A series are intended for use in compressed air service where the convenience of one hand operation and a compact profile is desired. Machined from solid bar stock, stainless balls and springs maximize corrosion resistance. maximum working pressure: 00 PSI at ambient temperature (70 F) Body NPT Thread Material Flow Rating at 0 PSI 7 CFM 2 CFM Pkg Qty Female Pipe Thread A1F1-B A2F2-B $ Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty Male Pipe Thread 7 CFM 2 CFM A1M1-B A2M2-B $ Body Hose ID Material Flow Rating at 0 PSI 7 CFM A1S1-B $7.1 Pkg Qty Hose Barb Chief A Series Quick-Connect Couplers automatic - push to connect Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty Female Pipe Thread 7 CFM 2 CFM 1AF1-B 2AF2-B $ Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty Male Pipe Thread 7 CFM 2 CFM 1AM1-B 2AM2-B $ Body Hose ID Material Flow Rating at 0 PSI 7 CFM 2 CFM Pkg Qty Hose Barb 1AS1-B 2AS2-B $

34 Chief Universal Quick-Connect U-series are the first 6-in-1 couplers, works with: ARO 2, MIL-C-49F, Truflate, Lincoln, Italian Standard and CJN 3. uro-style valving ensures maximum flow performance and automatic connection with minimal force required. Couplers have a sleeve-guard lip to reduce the risk of accidental disconnection while in service. Female Pipe Thread Male Pipe Thread Body Body automatic - push to connect NPT Thread NPT Thread Material Material Flow Rating at 0 PSI Flow Rating at 0 PSI UDC UDC23 UDC21 UDC23 $ $ Standard Hose Barb Body Hose ID Material Flow Rating at 0 PSI UDC42 UDC44 $ Chief Lincoln Series Quick-Connect Plugs These sockets and plugs are interchangeable with Lincoln's long stem series. Couplers shut-off when disconnected. rated 300 PSI at ambient temperature (70 F) Female Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty DCP28 $6.70 Male Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty DCP27 $.6 Chief Lincoln Series Quick-Connect Couplers These sockets and plugs are interchangeable with Lincoln's long stem series. Couplers shut-off when disconnected. rated 300 PSI semi-automatic - pull sleeve to connect Female Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty DC28 $1. Male Pipe Thread Body NPT Thread Material Flow Rating at 0 PSI Pkg Qty DC27 $

35 Dixon Keychain halves separate like a coupler and plug Plated Steel DKC1 $18.40 Breather Vents Breather vents have many applications, including vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Common uses can be found on single acting cylinders or valves to prevent dirt and foreign particles from entering ports open to the atmosphere. standard pipe thread fittings for quick assembly and removal for cleaning nickel plated insert with a bronze filter The filter element is rated for 40 micron filtration. maximum operating pressure: 10 PSI operating temperatures: 3 F to 300 F NPT Thread Overall Length 7/16" /8" 7/8" 1-/16" Nickel Plated Steel ASP-1BV ASP-2BV ASP-3BV ASP-4BV ASP-6BV ASP-8BV $ Conical Mufflers Conical mufflers are easy to install, threading the exhaust ports of air tool, valves, cylinders and other pneumatic equipment. They offer an economical method of reducing the noise levels below 90 dba, conforming with OSHA standards. The bronze filter element is rated for 40 micron filtration. The element is bonded directly to the fitting. These elements are not replaceable. maximum operating pressure: 300 PSI operating temperature: 3 F to 300 F NPT Thread Overall Length /8" 2-2-7/8" Nickel Plated Steel CMF18 CMF28 CMF38 CMF48 CMF68 CMF88 $ Speed Control Mufflers Speed control mufflers provide an infinite variation of metering air flow at an acceptable sound level on exhaust ports of air valves with complete safety. The speed of an operating cylinder or air tool may be increased or decreased with the adjusting screw. The final position is then locked in place by the lock nut. Objectionable exhaust air noise is eliminated by the surrounding sleeve of sintered bronze. maximum operating pressure: 300 PSI operating temperature: 3 F to 300 F NPT Thread Approximate Full Operating Height 1-/16" 1-9/16" 1-/8" 2" 2-2- Maximum Adjusted T3 Aluminum Brass ASCM18 ASCM28 ASCM38 ASCM48 ASCM68 ASCM88 $ SCM18 SCM28 SCM38 SCM48 SCM68 SCM88 $ aluminum 13

36 Mini In-Line Lubricators can be refilled under line pressure oil capacity is ¼ fluid ounce flow rating is 22 at 0 PSIG maximum operating conditions: 0 PSIG and 17 F Female NPT Inlet Mini In-Line Filter NPT Outlet female male male Aluminum ML0 ML0M ML300M $ either port may be used as an inlet port filter element rated at microns flow rating is 17 inlet pressure at 0 PSIG maximum operating conditions: 0 PSIG and 17 F Female NPT Male NPT Aluminum MF0 $42.0 Description Replacement element FRP $14.00 In-Line Filter Designed specifically for the protection of small air tools, such as impact wrenches, nut runners, grinders and screwdrivers. The all-anodized, lightweight aluminum housing is compact and can be used directly before the air tool. standard element is 40 micron, which ensures minimum pressure drop elements can be replaced quickly maximum operating pressure: 00 PSI operating temperatures: 3 F to 0 F air flow is 140 Male Overall Weight Aluminum Diameter NPT Length Lbs. 3-13/16" M $68.00 Miniature Non-Repairable General Purpose Regulators Relieving piston design allows reduction of downstream pressure when the system is dead-ended. reliable pressure regulation at air flows up to 13 left to right flow to 12 PSIG outlet pressure adjustment range compact design and light weight construction wrench flats for easy installation model supplied with a GC6 gauge with gauge without gauge ¼" R46-0RG $6.40 ¼" R46-0R $

37 Anti-Freeze Lubricants Winter grade air tool lubricant that prevents air line, air tool and in-line lubricator freeze-up. can be poured directly into tool or used with air line lubricators performance is good to -4 F Opt Qty 1 pint 1 gallon DATL016W DATL128W $ pint 1 gallon Tool Lubricants A specially formulated high grade lubricant that prolongs the service life of air tools, cylinders and accessories while permitting maximum performance. It is a # weight lubricant. This compound is superior in performance to ordinary lubricants. Prohibits rust and removes moisture as it lubricates. It is non-corrosive, non-reactive and does not decompose. The easy pour spout helps prevent costly spills. Use with the in-line lubricators on page 119. Opt Qty 1 pint 1 gallon DATL016 DATL128 $ gallon 1 pint 137

38 maximum working pressure is 300 PSI at ambient temperature (70 F) hex head plugs sold on page 3 Bar Manifolds The bar manifold can be mounted on a wall or work bench, safely distributing four hose lines to a work area. AMF32 AMF42 AMF43 Aluminum $ A B C D F G H J 7-/8" 7-/8" 8" 7/8" /8" 1-7/8" 2" "."."." Applications: supplies 3 air operated tools from a single hose, permits use of air by more than one mechanic 3 in 1 Manifolds mount to pipe at workbench or overhead different tools in the shop use different styles of couplers, mount 3 different style couplers on one manifold NPT Inlet (1) NPT Outlet (3) Aluminum D3404 D3406 D3408 $ Applications: supplies 2 air operated tools from a single hose, permits use of air by more than one mechanic mount to pipe at workbench or overhead 2 in 1 Manifolds different tools in the shop use different styles of couplers, mount 2 different style couplers on one manifold stock quantity only NPT Inlet (1) NPT Outlet (2) Aluminum D2404 D2406 D2408 $ Flat Hex Manifolds The flat hex manifold is designed to lay flat on the floor, safely distributing three hose lines to the work area. NPT Inlet (1) NPT Outlet (3) Brass $

39 Safety Pop-Off Valves Heavy Duty, High Capacity Safety Pop-Off Valves ASM Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. all construction with chrome ball on a precision machined seat equipped with a pull ring for manual testing maximum temperature 400 F (4 C) male NPT Preset Pressure PSI Brass SV30HD SV0HD SV12HD SV10HD SV17HD SV0HD $ /16" Standard Safety Pop-Off Valves ASM Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Brass valves are supplied with a stainless ball. Stainless valves are all stainless construction. maximum operating temperature is 400 F (4 C) male NPT Preset Pressure PSI Brass Stainless Steel SV30 SV0 SV12 SV10 SV17 SV0 $ SV30SS SV0SS SV12SS SV10SS SV17SS SV0SS $ Soft Seat Safety Pop-Off Valves ASM Code, National Board Certified Safety Valve for compressed air service applications. Designed for Original quipment Manufacturers, utilizing ASM Code un-fired pressure vessels in their finished product. constructed of precision machined bar stock, with a maximum operating temperature is 400 F (4 C) silicone disc seating on Preset Pressure PSI male NPT Brass 33 KSV-0 40 KSV KSV-10 4 KSV-17 $

40 Brass Lever xternal Drains for air service only maximum working pressure: 30 PSI at ambient temperature (70 F) LDC2 LDCM2 LDCF2 Female NPT Male NPT Brass Male NPT Male NPT Brass Female NPT Female NPT Brass LDC2 $28. LDCM2 $31.2 LDCF2 $29.80 Brass xternal Drain Cocks designed for low pressure water and air applications maximum working pressure: 10 PSI at ambient temperature (70 F) NPT Brass D02 D04 $ Brass Needle Valves metal-to-metal seats allow positive sealing and flow adjustment designed for air and water applications maximum working pressure: 10 PSI at ambient temperature (70 F) Female NPT Female NPT Brass Male NPT Male NPT Brass NV2F NV4F $ NV4M $19.7 Brass Check Valves - Series C provides free flow in one direction and dependable shutoff in the opposite direction maximum operating pressure: 00 PSI at ambient temperature (70 F) cracking pressure: PSI also available in, see page 39 Female NPT Free Flow GPM Brass BCV0 BCV400 BCV600 BCV800 $

41 Flow control valves provide precision flow control and full shutoff in one flow direction and automatically allow unrestricted free flow in the opposite direction. Two-step needle provides fine adjustments at low flow with the first three turns of the adjusting knob.the next three turns give full-open needle position and conventional throttling control. When flow is reversed, the heavy-duty poppet/retainer permits full-flow return capacity. Thread BFC0 BFC400 BFC600 BFC800 BFC10 Brass Flow Control Valves Series F Brass $ xclusive color coded reference scale on the adjusting knob greatly simplifies flow setting, resetting, adjusting and return to an original flow. A simple set screw locks the valve on any desired setting. maximum operating pressure: 00 PSI at ambient temperature (70 F) also available in, see page 39 Series PF Utilizes a ball type check that meters flow of air in one direction and allows free flow in the reverse direction. Used to control actuator speed by acting as a restriction. maximum operating pressure: 00 PSI at ambient temperature (70 F) cracking pressure: PSI also available in, see page 39 Thread Brass BPF0 BPF400 BPF600 BPF800 $ Series N Ideal for use as speed controls on pneumatic systems where a reverse flow check valve is not needed. Provides excellent control and reliable shutoff in a very small envelope. Color coded reference scale on the adjusting knob simplifies setting, resetting, adjusting and quick return to a previous speed setting. maximum operating pressure: 00 PSI at ambient temperature (70 F) also available in, see page 39 Thread Brass BN0 BN400 BN600 BN800 BN10 $

42 Chief Safety Blow Gun This basic safety blow gun is designed to conform to OSHA Standard (B) permitting a maximum of 30 PSI outlet pressure when dead ended based on a maximum of 10 PSI inlet pressure as well as OSHA Standard 19.9 regulating occupational noise level exposure. Safety glasses or shield must be worn when using any blow gun. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with black vinyl grip further adds to the ergonomic design and allows for easy air flow activation. Recessed internal slotted screw allows easy access to valve assembly for repairs or replacement. Chrome plated zinc die cast body, nickel plated lever, vinyl thumb grip, stainless spring, valve, Buna-N seals and nickel plated tip combine for superior corrosion resistance as well as a contemporary look. ¼" female NPT inlet D4-30 $18. Note: The Chief safety blow gun has a safety tip which prevents buildup of tip pressure in the event the outlet is obstructed or "dead ended". It complies with the requirements for OSHA (B) and 19.9 when used on air lines of 10 PSI or less. Premium Safety Blow Gun The premium safety blow gun features a distinctive black powder coat finish to give it a rich appearance as well as long term protection from corrosion and rough handling. Designed to conform to OSHA Standard (B) permitting a maximum of 30 PSI outlet pressure when dead ended based on a maximum of 10 PSI inlet pressure as well as OSHA Standard 19.9 regulating occupational noise level exposure. Safety glasses or shield must be worn when using any blow gun. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with vinyl grip further adds to the ergonomic design and allows for easy air flow activation. Zinc die cast body with a black powder coat finish, nickel plated lever, vinyl thumb grip, stainless spring, valve, Buna-N seals and nickel plated tip. ¼" female NPT inlet D4-30P $19.2 Note: The premium safety blow gun has a safety tip which prevents buildup of tip pressure in the event the outlet is obstructed or "dead ended". It complies with the requirements for OSHA (B) and 19.9 when used on air lines of 10 PSI or less. 142

43 Safety Booster Blow Gun The multiple holes in the safety booster tip of the safety air booster gun create a venturi effect that increases air flow (working capacity) while still remaining compliant with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with vinyl grip further adds to the ergonomic design and allows for easy air flow activation. Chrome plated zinc die cast body, nickel plated lever, vinyl thumb grip, stainless spring, valve, Buna-N seals and nickel plated Safety Booster tip provide superior corrosion resistance. ¼" female NPT inlet D4-30SB $22.60 Note: The safety air booster blow gun has a safety tip which prevents buildup of tip pressure in the event the outlet is obstructed or "dead ended". It complies with the requirements for OSHA (B) and 19.9 when used on air lines of 10 PSI or less. Non-Safety Brass Tip Blow Gun The ventless, nickel-plated tip provides the most economical means of achieving a concentrated stream of air for many blowoff applications. All other components and design features are the same as our Chief safety blow gun (D4-30). Must be used on air lines having a maximum regulated pressure of 30 PSI in order to comply with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with vinyl grip further adds to the ergonomic design and allows for easy air flow activation. Chrome plated zinc die cast body, nickel plated lever, vinyl thumb grip, stainless spring, valve, Buna-N seals and ventless, nickel plated tip provide superior corrosion resistance. ¼" female NPT inlet D60 $16.90 Caution: This blow gun does not have a safety by-pass to prevent buildup of tip pressure in the event of tip blockage. It may be used for cleaning purposes only if the air supply (inlet pressure) has been reduced to 30 PSI or less. Non-Safety Rubber Tipped Blow Gun The rubber tip will not scratch or mar delicate surfaces. The conical, rubber tip can also be used to create a seal between the blow gun and fluid lines (or any other opening). Base of the tip is nickel-plated for additional corrosion resistance. Must be used on air lines having a maximum regulated pressure of 30 PSI in order to comply with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. Blow gun body is designed to comfortably fit the contour of the hand, minimizing user fatigue. Large lever with vinyl grip further adds to the ergonomic design and allows for easy air flow activation. Chrome plated zinc die cast body, nickel plated lever, vinyl thumb grip, stainless spring, valve, Buna-N seals and rubber tip with a nickel plated base provide superior corrosion resistance. ¼" female NPT inlet D1 $21. Caution: This blow gun does not have a safety by-pass to prevent buildup of tip pressure in the event of tip blockage. It may be used for cleaning purposes only if the air supply (inlet pressure) has been reduced to 30 PSI or less. 143

44 Blow Gun xtensions These extension tips allow easier access to blow-off applications in high or hard to reach places. Supplied with male NPT connections. Can be used with all Dixon Chief lever operated blow guns as well as most blow guns from other manufacturers. Made from a base with a rugged extension tube, all nickel plated. xtension 6" " 12" 18" 24" Blow Gun Tips BG6 BG BG12 BG18 BG24 $ Nickel plated safety tip with male NPT connection can be used with all Dixon Chief lever operated blow guns as well as most blow guns from other manufacturers. SST $3.0 Rubber non-safety tip with nickel-plated male NPT connection can be used with all Dixon Chief lever operated blow guns as well as most blow guns from other manufacturers. D1RT $7.7 Cannon Blow Guns High Volume Cannon Blow Gun Ideal where a large air supply is available to move heavy, stubborn debris. Designed for, but not limited to, outdoor use. Compliant with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. ¾" female NPT inlet minimum inlet pressure 90 PSI on ½" hose consumes 13 CFM at 0 PSI 48" long extension S $30.00 ¾" female NPT inlet minimum inlet pressure 90 PSI on ½" hose Multi-Jet Cannon Blow Gun Ideal where a large air supply is available to move heavy, stubborn debris. Designed for, but not limited to, outdoor use. Compliant with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. consumes 1 CFM at 0 PSI 2" long extension 9000-MJ $

45 Heavy Duty - High Volume Blow Guns heavy duty - high volume safety blow guns requires high volume coupler and plug for optimum performance lightweight and ergonomic pistol grip / hanging hook handle made from high quality aluminum casting maximum operating pressure: 10 PSI ¼" female NPT inlet Safety glasses or shield must be worn when using any blow gun. reduced to 30 PSI when tip is blocked Description HTBG HTBG6 HTBG12 HTBG24 HTBG36 gun with no extension gun with 6" extension gun with 12" extension gun with 24" extension gun with 36" extension Blow Gun with Safety Tip $ Note: The safety air booster blow gun has a safety tip which prevents buildup of tip pressure in the event the outlet is obstructed or "dead ended". It complies with the requirements for OSHA (B) and 19.9 when used on air lines of 10 PSI or less. Blow Gun with Quiet Conical Tip 7.0 CFM Description HTBG-CT gun with tip only $1.0 Accessories Description Material Description Material HTBG6XT HTBG12XT HTBG24XT HTBG36XT 6" extension with safety tip 12" extension with safety tip 24" extension with safety tip 36" extension with safety tip aluminum aluminum aluminum aluminum $ HTBGS HTBGC HTBGA DC41 DCP41 safety tip conical tip tip adapter high flow female coupler high flow male plug aluminum aluminum aluminum $ High Volume Typhoon Blow Guns chrome plated aluminum body variable flow control silicone free for use in paint applications ¼" female NPT inlet 34 CFM at 12 PSI Compliant with OSHA Standard (B). Safety glasses or shield must be worn when using any blow gun. Description TYP1-12 TYP1-24 TYP1-36 gun with 12" extension gun with 24" extension gun with 36" extension $

46 Pistol Grip Safety Blow Gun PG700 $.90 conforms to U.S. Department of Labor, OSHA Standard (B) allowing a maximum of 30 PSI outlet pressure at the nozzle when dead-ended conforms to U.S. Department of Labor, OSHA Standard 19.9 regulating noise level exposure conforms to Title 41, Walsh-Healy Rules and Regulations P0-4.8, Safety and Health Standards Contoured pistol-grip for safe, comfortable handling, even with greasy hands. convenient hang-up hook ¼" female NPT inlet Safety glasses or shield must be worn when using any blow gun. xtended Nozzle Pistol Grip Safety Blow Gun NBG1 $30. conforms to U.S. Dept. of Labor, OSHA Standard (B) allowing a maximum of 30 PSI outlet pressure at the nozzle when dead-ended conforms to U.S. Dept. of Labor, OSHA Standard 19.9 regulating noise level exposure conforms to Title 41, Walsh-Healy Rules and Regulations P0-4.8 Safety and Health Standards Slender 4" extended nozzle allows access to hard to reach places and holes as small as.0". variable output trigger enables user to control air flow Hook design near trigger provides finger protection as well as easy storage. lightweight to help minimize user fatigue. Side holes allow air to escape if nozzle tip is dead-ended, thus preventing back pressure buildup. pressure rating: 10 PSI ¼" female NPT inlet Safety glasses or shield must be worn when using any blow gun. 146

47 bright orange for use with jack hammers, chipping hammers, rock drills and other large pneumatic tools ½" male NPT swivels on each end abrasion resistant oil and grease resistant working pressure: 0 PSI at 70 F strain relief spring bend restrictors Hose ID Length Male NPT ½" ½" ½" 6' ' 2' ½" ½" ½" Polyurethane Whip Hose fittings included PFD068 PFD8 PFD12 $ Polyurethane Hose fittings included A sturdy, nylon-reinforced braid between the inner and outer tube allows for a higher working pressure. durable lightweight excellent flexibility oil resistant durometer: Shore A 8 temperature range: -40 F to 1 F working pressure: 2 PSI at 70 F Hose ID Length Male NPT 0' 0' 0' 40-4S 60-4S 60-6S $ extremely flexible - resists kinking impervious to abrasions, heat and oil superior elasticity and coil memory blue Polyurethane working pressure: 12 PSI at 70 F both ends swivel Polyurethane Self-Storing Hose fittings included Hose ID Length Male NPT ' 1' 2' 1' ' 2' 0' 1' PU14 PU141 PU142 PU381 PU38 PU382 PU380 PU121 $ Repair Kits ID Tubing OD Type 9/16" swivel male swivel male PSM0404 PSM0604 $

48 Coil-Chief Self-Storing Hose yellow nylon working pressure: 0 PSI at 70 F Coil-Chief comes standard with swivel on one end bulk hose - no fittings Hose ID Length 0' 0' 0' CC140B CC380B CC1B Note: bulk hose needs assembly kits for ends $ fittings included Hose ID Length Male NPT 12' 2' 0' 2' 0' 2' 0' CC1412 CC142 CC140 CC382 CC380 CC122 CC1 $ Repair Kits Repair / assembly kits include fittings, nut, insert, ferrule and spring guard. Fitting Type rigid male swivel male rigid male swivel male rigid male swivel male RK090 RK092 RK1 RK112 RK118 RK119 $

49 Tire Pressure Gauges and Accessories 12" hose with swivel dual foot chuck inflator tapered chuck nut fits wheel cover holes on cars and light trucks calibrated in 2 PSI increments from to 1 PSI Heavy Duty Tire Gauge D1 $ " hose with straight-on chuck straight chuck nut fits wheel cover holes on cars and light trucks ideal for use on wells and reels calibrated in 2 PSI increments from to 90 PSI Passenger Car Tire Gauge D10 $73.3 permanently lubricated easy to read, dual calibrated (PSI and kpa), four-sided nylon indicator bar body is made of chrome-plated, head is chromeplated zinc pocket clip calibrated in 2 PSI increments from to 0 PSI Professional Tire Pressure Gauge DFG $11.0 heavy duty hang-up ring calibrated in 2 PSI increments from to 130 PSI Dual Foot Gauges DFG2 $3.0 handy pocket clip calibrated in 2 PSI increments from to 1 PSI DFG1 $16.7 ball foot chuck for direct connection to live air only features a built-in shutoff valve (will not work on inflator gauges) ¼" NPT female thread maximum pressure is 300 PSI Opt Qty D4 $7.60 Brass Tire Inflator Chuck 149

50 Ball Swivels and hardened construction O-ring seals wobble action for increased flexibility with air driven tools Ball and Push-On Ball Swivels Push-On Ball Swivels special barb design for secure grip in push-on type air hoses Hose Male NPT Opt Qty D444S D446S $ Hose Male NPT Opt Qty D444SL D446SL $ heavy-duty, free turning swivel for air service only rated to PSI at ambient temperature (70 F), minimum 3 PSI In-Line Swivels for air service only rated to 10 PSI at ambient temperature (70 F) Male NPT Female NPT SV17 SV SV26 Steel $ Male NPT Female NPT Brass D344R D366R $ Angled Swivel Angled swivel plugs are lightweight and streamlined. They can be used in the automotive and electronics industries, workstations, commercial and residential construction, and robotic joints. Helps alleviate carpal tunnel syndrome and back stress resulting in fewer lost time injuries. 360 circular rotation and 4 angled rotation Material: - body is nickel-plated - dust cover is polyurethane rated to 14 PSI temperature range: F to 140 F for air service only Male Pipe Thread Male Pipe Thread male x male male x female D244ANSW D266ANSW $ Male Pipe Thread Female Pipe Thread male x hose barb D324ANSW D344ANSW D364ANSW D366ANSW $ Male Pipe Thread Hose Barb D424ANSW D444ANSW D446ANSW D466ANSW $

51 Steel Bent Stem Swivels bent stem swivels are designed for normal operation at 90 PSI at ambient temperature (70 F) hose barb 7/8" thread fits the following tool brands: Ingersoll-Rand, Thor, Black & Decker, Harper, Jet, Texas Pneumatic, Kent and Sullair thread fits all tools with female NPT thread Description 7/8" - 24 thread x hose barb NPT thread x hose barb Steel ATS7812H ATS1212H $ Opt Qty 0 0 female pipe thread 7/8" thread fits most chipping hammers Description Steel Opt Qty 7/8" - 24 thread x female NPT ATS7838F $ male pipe thread 7/8" thread fits most chipping hammers Description Steel Opt Qty 7/8" - 24 thread x male NPT ATS7838M $ Tool Swivels swivels at two locations so air hose can drop directly to the floor rated to 10 PSI at ambient temperature (70 F) Aluminum D344U * D346U D348U $ * D344U is a non-marring composite. 11

52 reel inlet NPTF all construction full shaft and swivel furnished standard with PVC hose Spring Driven Hose Reels Reelcraft 000 Series maximum temperature is 10 F Compressed air hose should not be converted to oxygen service. Compressed air hoses are often contaminated with an oil coating, which can react explosively when oxygen is introduced. with hose Hose ID Hose Length Service PSI Weight lbs. 0' 3' 0' air / water air / water air / water LP 63LP 60LP $ without hose Hose Capacity Service PSI Weight lbs. 0' of or 3' of 0' of air / water air / water LP 60LP $ all construction "LP" Low Pressure reels: - maximum temperature 10 F - reel inlet NPTF - PVC hose is standard Reelcraft 7000 Series "MP" Medium Pressure reels: - maximum temperature 2 F - reel inlet NPTF - SA 0 R1T 1-wire braid hose available "HP" High Pressure reels: - maximum temperature 2 F - reel inlet NPTF - SA 0 R2T 2-wire braid hose available with hose Hose ID Hose Length Service PSI Weight lbs. 70' 0' air / water air / water LP 780LP $ without hose Hose Capacity Service PSI Weight lbs. 70' of, 0' of 0' of or 0' of 0' of or 0' of reel inlet NPTF Five-in-one heat treated aluminum casting incorporates main shaft, ratchet, spring arbor and inlet/outlet plumbing in one piece casting. furnished standard with PVC hose air / water oil grease Reelcraft Series LP 7800MP 7600HP The most compact x 0' hose reel of its capacity available. maximum temperature is 10 F with hose maximum temperature is 2 F without hose $ with hose Hose ID Hose Length Service PSI Weight lbs. 7' 0' 0' air / water air / water air / water LP 8LP 8300LP $ See next page for bumper stops. Consult factory for uses other than stated services. without hose Hose Capacity Service PSI Weight lbs. 0' of or 0' of air / water LP $

53 Adjustable Hose Bumper Stops Hose ID or 2-wire Hose OD Dimensions Reel Series From: To: B,C, D Used On.438".62".62".70" 1.060".70" 1.060" 1.390".62".749".749" 1.00" 1.300" 1.00" 1.380" 1.0" " 3" 3" /8" 2-7/8" 2-7/8" 000 series 000 series 7000 series 7000 series 7000 series 9000 series 9000 series 9000 series 1-HR04A 1-HR04 1-HR HR HR HR0 3-HR0 4-HR0 Adjustable Hose Bumper Stops are not included on hose reels ordered without hose. Order separately. $ Hose ID Hose Capacity Reelcraft 30,000 Manual Driven Hose Reels unitized construction: reel frame, spool and drum are fabricated from heavy gauge all bolted construction - no welds manual driven standard motor drive available ½" inlet ¾" ½" 0' 0' Spool Width 12" 12" without hose Weight PSI lbs C33112L C32112M Hose Racks can be used for fire or water hose fabricated of heavy, 12 gauge sheet for rugged industrial and shipboard use provides compact and economical hose storage curved saddle design avoids sharp bends in the hose prolonging hose life red enamel finish Hose Rack Hose Capacity Single Jacket Double Jacket $ Wt. Lbs. 1½" - 1¾" 0' HR16-3 $1.6 1½" - 1¾" 0' HR ½" - 2½" 0' 10' 0' 7.8 HR " - 2½" 0' HR Hung Up On Dixon Hose Racks can be used for fire or water hose aluminum rack can be easily mounted single and double racks have pre-drilled /16" mounting holes two racks can be bolted face to face to create extra hose capacity single rack overall dimensions 19- x 6" x 9-3/16" double rack overall dimensions 19- x 12" x 9-3/16" DHR1 single hose rack Description Weight lbs. single hose rack double hose rack DHR1 DHR2 $ DHR2 double hose rack 13

54 ] Applications: high pressure high temperature nitrogen helium Instrumentation fittings come completely assembled. Installation Instructions: 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Insert the tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight. 3. Tighten the nut with a wrench 1¼ turns, while holding the body with a second wrench. Instrumentation flammable gases hydraulic gases corrosive media Suggested Working Pressures wall thk ,000,0 7,00, ,300 4,700 6, ,600 3,700,000 6, /8" ,900 3,900,0 6, ,400 3,0 4,0 4,900,700 Features: fully interchangeable with Swagelok and Parker A-Lok fittings double collet (ferrule) swaging action two positive seal points ASTM material construction material: 316 stainless temperature ratings: -32 F to 10 F (-198 C to 648 C) pressure ratings: see chart to the left Ratings listed are for reference only. Safety Guidelines: Never connect, disconnect or remake a fitting with pressure in the system. Make sure all fittings are properly installed. It is not recommended to go beyond the pressure rating of the tubing. longation could occur in the tubing, shrinking the wall thickness and cause potential harm. For proper sealing it is recommended that the tubing and fittings be of like material. Always use proper thread lubricant and sealants on tapered pipe threads. Never bleed a system by loosening a fitting. Male Connectors Tube OD Female Connectors ] /8" Male NPT Interchanges Stainless Steel Pkg Qty 4-DMC-2 4-DMC-4 4-DMC-6 4-DMC-8 6-DMC-4 6-DMC-6 6-DMC-8 8-DMC-4 8-DMC-6 8-DMC-8 -DMC-8 12-DMC-8 12-DMC-12 $ Tube OD Female NPT Interchanges Stainless Steel Pkg Qty 4-DFC-2 4-DFC-4 6-DFC-4 6-DFC-8 8-DFC-8 $ Male lbows Tube OD Male NPT Interchanges Stainless Steel Pkg Qty 4-DM-2 4-DM-4 6-DM-4 6-DM-6 8-DM-8 12-DM-8 12-DM-12 $

55 Instrumentation Union Tees Tube OD Interchanges Stainless Steel Pkg Qty 4-DTTT-4 6-DTTT-6 8-DTTT-8 $ Tube OD x x x x Interchanges Stainless Steel Pkg Qty 4-DU $ DU DU DU Unions Bulkhead Unions Tube OD Interchanges Stainless Steel Pkg Qty 4-DBHU-4 6-DBHU-6 8-DBHU-8 $ Front Ferrules Tube OD Interchanges Stainless Steel Pkg Qty DFC-4 DFC-6 DFC-8 $ Rear Ferrules Tube OD Interchanges Stainless Steel Pkg Qty DRC-4 DRC-6 DRC-8 $ Tube OD Interchanges 400ST 600ST 800ST 316 Stainless Steel Pkg Qty DCST-4- DCST-6- DCST-8- $ Ferrule Sets NW for 11!! Nuts Tube OD Interchanges Stainless Steel Pkg Qty DN-4 DN-6 DN-8 $

56 NW for 11!! Instrumentation Union lbows Tube OD Interchanges Stainless Steel Pkg Qty 4-DLU-4 6-DLU-6 8-DLU-8 $ NW for 11!! Reducers Tube OD x x x x x Interchanges 400-R R R-8 8-R R Stainless Steel Pkg Qty 4-DRATT-2 6-DRATT-4 6-DRATT-8 8-DRATT DRATT-8 $ NW for 11!! Female lbows Tube OD Female NPT Interchanges Stainless Steel Pkg Qty 4-DF-2 6-DF-4 8-DF-8 $ NW for 11!! Male Branch Tee Tube Male 316 Stainless Steel Pkg Interchanges OD NPT Qty TTM 4-DTTM-4 $2.2 NW for 11!! Male Run Tees Tube OD Male NPT Interchanges TMT 600-3TMT 316 Stainless Steel Pkg Qty 4-DTMT-4 6-DTMT-4 $2.2.4 Caps Tube OD Interchanges 400-C 600-C 8-C 316 Stainless Steel Pkg Qty 4-DCAP 6-DCAP 8-DCAP $ Plugs Tube OD Interchanges 400-P 600-P 8-P 316 Stainless Steel Pkg Qty 4-DFPLUG 6-DFPLUG 8-DFPLUG $

57 Brass SA 4 Flare Advantages: economical fitting resists mechanical pullout easy to disassemble and may be reassembled repeatedly, for a leak-proof connection manufactured from CA 360, CA 34, or CA377 manufactured especially for hard-to-hold liquids and gases Specifications: Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SA J12 and J13, ASA and MS (Military Standards). temperature range: -6 F to F Applications: use with copper,, aluminum and welded hydraulic tubing that can be flared Working Pressure Ranges: Temperature and type of tubing used are important factors, the following table is a good guide for proper selection. The PSI rating given is based on a temperature of 73 F using copper tubing. PSI Tube OD Tube Wall /8" Assembly Instructions: 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. Flare tube end with flaring tool to provide 4 flare. (flare tools are available, please contact the factory for pricing and availability) 4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional ¼ turn for a metal-to-metal seal. long nut offers additional vibration capacity reference SA 0111 Long Nuts Tube Straight Thread Hex Brass 7/16- /8-18 3/4-16 9/16" 7/8" 41FL-4 41FL-6 41FL-8 $ Short Nuts short nut may be used when vibration is minimal reference SA 01 Tube Straight Thread Hex Brass 7/16- /8-18 3/4-16 9/16" 7/8" 41FS-4 41FS-6 41FS-8 $

58 Brass SA 4 Flare Unions reference SA 01 Tube Straight Thread Hex Brass 7/16- /8-18 3/4-16 7/16" /8" 42F-4 42F-6 42F-8 $ Union Tees reference SA 0401 Tube Straight Thread 7/16- /8-18 3/4-16 Brass 144F-4 144F-6 144F-8 $ Female Connectors reference SA 03 Tube Pipe Straight Thread Hex Brass /8" 7/16-7/16- /8-18 /8-18 /8-18 3/4-16 3/4-16 3/4-16 7/ /16" 13/16" 11/16" 13/16" 13/16" 7/8" 46F F F F F F F F F--6 $ Male Connectors reference SA 02 Tube Pipe Straight Thread Hex Brass /8" 7/16-7/16-7/16- /8-18 /8-18 /8-18 /8-18 3/4-16 3/4-16 3/4-16 7/ / /16" 11/16" 7/8" /8" /8" 11/16" 7/8" 7/8" 7/8" 1-1/16" 48F F F F F F F F F F F--6 48F $

59 reference SA 02 Tube /8" Pipe reference SA 03 Tube Pipe Straight Thread 7/16-7/16-7/16- /8-18 /8-18 /8-18 3/4-16 3/4-16 3/4-16 7/ /16-14 Straight Thread 7/16-7/16- /8-18 /8-18 /8-18 3/4-16 3/4-16 Brass SA 4 Flare Male lbows Brass 149F F F F F F F F F F F $ Brass 10F F F F F F F-8-8 Female lbows $ reference SA 01 Tube Straight Thread 7/16- /8-18 3/4-16 Brass 1F-4 1F-6 1F-8 Union lbows $ reference SA 0302 Tube Pipe Straight Thread 7/16- /8-18 /8-18 3/4-16 3/4-16 3/4-16 Brass 19F F F F F F lbows $ Swivel lbows Tube Straight Thread 7/16- /8-18 3/4-16 Brass 166FSV FSV FSV-8-8 $

60 Brass Compression Advantages: no flaring, soldering or other preparation of tubing necessary to assemble manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved Specifications: Listed with Underwriter's Laboratories for flammable liquid. Compression fittings meet functional requirements of SA J-12 and ASA. Applications: use with copper, aluminum and Parflex thermoplastic tubing not recommended for tubing not recommended for application using gaseous media Assembly Instructions: 1. Slide nut, then sleeve onto tubing. The thread end of the nut must face out. 2. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder. 3. Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right. Delrin Sleeves Fitting Tube 1/8 3/16 1/4 /16 3/8 1/2 /8 3/4 7/8 Turns required to seal from hand-tight 60C Series with soft metal tubing 1-1/4 1-1/4 1-1/4 1-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 Brass Sleeves 60PT Series with thermoplastic tubing reference SA Tube /16" /8" Delrin 60PT-04 60PT-0 60PT-06 60PT-08 60PT- 60PT-12 $ Tube 3/16" /16" 7/16" /8" 7/8" Brass 60C-02 60C-03 60C-04 60C-0 60C-06 60C-07 60C-08 60C- 60C-12 60C-14 $ Long Nuts Nuts reference SA reference SA 0601 Tube /16" /8" Straight Thread 7/ /2-24 9/ /16-13/ Brass 61CL-04 61CL-0 61CL-06 61CL-08 61CL- 61CL-12 $ Tube 3/16" /16" 7/16" /8" 7/8" Straight Thread / /8-24 7/ /2-24 9/16-24 / /16-13/ /8-18 Brass 61C-02 61C-03 61C-04 61C-0 61C-06 61C-07 61C-08 61C- 61C-12 61C-14 $

61 Brass Compression Unions Union Reducers reference SA 0601 BA Tube 3/16" /16" 7/16" /8" 7/8" Brass 62C-02 62C-03 62C-04 62C-0 62C-06 62C-07 62C-08 62C- 62C-12 62C-14 $ reference SA 0601 BA Tube 3/16" x x x x /8" Brass 62C C C C-06 $ Union Tees Union lbows reference SA BA Tube 3/16" /16" /8" Brass 164C C C C-0 164C C C- 164C-12 $ reference SA 0601 BA Tube 3/16" /16" 7/16" /8" Brass 16C-02 16C-03 16C-04 16C-0 16C-06 16C-07 16C-08 16C- 16C-12 $ Brass Inserts Bulkhead Unions Tube Wall Thickness 3/16" 3/16" /16" /16" /8" PT Note: Delrin sleeves and inserts convert standard compression fittings for use with industrial grades of thermoplastic tubing. See page 160 for Delrin sleeves Brass 63PT PT PT PT PT PT PT PT PT PT PT-0862 $ Tube Brass 62CBH-04 62CBH-06 $

62 162 Brass Compression Female Connectors Male Connectors Male lbows Female lbows Tube Pipe Thread Brass 3/16" 7/16" 170C C C C C C C C-0806 $ Tube Pipe Thread Brass 3/16" 3/16" /16" /16" /8" 66C-02 66C C C C C C C C C C C C C C-08 $ Tube Pipe Thread Brass 3/16" 3/16" /16" /16" 7/16" /8" /8" /8" 7/8" 68C-02 68C C C C C C C C C C C C C C C C C-06 68C-08 68C-12 68C-18 68C C-1412 $ Tube Pipe Thread Brass 3/16" 3/16" /16" /16" /16" /8" 269C C C C C C C C C C C C C C C C C C C-1212 $

63 Brass Compression Male Run Tees Male Branch Tees Tube Pipe Thread Brass 171C C C C-0604 $ Tube 3/16" Pipe Thread Brass 172C C C C C C C C-0806 $ lbows Straight Through Tank Tube Pipe Thread Brass Tube Pipe Thread Brass 179C C C C C C-0806 $ /16" 682C C C-0808 $ Adapter Tee Brass Pipe Thread Straight Thread 7/ C-0402 $11.49 Brass Tube Pipe Thread 177C-0402 $1.61 Female Branch Tee Brass Tube 639C-04 $4.04 Seal Plug 163

64 Brass Push-In Quick connect: simply push tubing in, no tools required. Saves up to 7% of assembly time versus the standard compression fittings. Quick disconnect: hold two fingers on insert and pull tubing out, no tools required. reusable: connect and disconnect numerous times Full flow design provides up to 60% more flow than conventional fittings with internal tube supports. Male Swivel lbows positive seal: no leaks, after tubing is inserted, seal is made secure tube retention: pulling on tubing only serves to tighten the connection. Pre-applied Teflon based pipe sealant on all male pipe threads saves customer additional labor. Working pressure: fittings are suitable for use up to the maximum working pressure of the plastic tubing used. Also suitable for vacuum service. working temperature: - F to 0 F Male lbows tube to male NPTF Tube OD Male NPTF Forged Brass Opt Qty /32" /32" /32" -32 * -32 * 69S4x4 69Sx 69Sx4 69Sx8 69S8x 69S8x4 69S8x8 69S8x12 69S12x4 69S12x8 69S12x12 69S12x16 69S16x12 69S16x16 * UNF - Straight thread, supplied with gasket $ tube to male NPTF Tube OD Male NPTF Forged Brass Opt Qty /32" 3/16" 694x4 69x4 696x4 698x4 698x8 698x x4 6912x8 6912x x8 6916x12 $ Unions Bulkhead Unions tube to tube tube to male thread Tube OD Brass Opt Qty Tube OD Thread Brass Opt Qty /32" $ /32" 3/16" 7/16-7/16-1/2-1/2-3/4-16 1/ $

65 Brass Push-In Male Connectors Female Connectors tube to male NPTF tube to female NPTF Tube OD Male NPTF Brass Opt Qty /32" /32" /32" 3/16" 3/16" -32 * -32 * -32 * -32 * 684x 684x4 68x 68x4 68x8 686x 686x4 688x 688x4 688x8 688x x4 6812x8 6812x x x8 6816x x16 $ Tube OD /32" Female NPTF Brass 664x4 66x4 668x4 668x8 6612x8 6612x12 $ Opt Qty * UNF - Straight thread, supplied with gasket Female lbows Union lbows tube to female NPTF tube to tube Tube OD Female NPTF Forged Brass Opt Qty Tube OD Forged Brass Opt Qty /32" 70x4 708x4 708x8 7012x8 $ /32" $ Tube OD /32" 3/16" tube to tube Forged Brass $ Union Tees Opt Qty 16

66 Brass Push-In Male Swivel Branch Tees Male Branch Tees tube to male NPTF Tube OD Male NPTF Brass Opt Qty /32" /32" -32 * 72S4x4 72Sx 72Sx4 72S8x4 72S8x8 72S12x8 72S12x12 72S16x12 72S16x16 * UNF - Straight thread, supplied with gasket. $ tube to male NPTF Tube OD Male NPTF Brass Opt Qty /32" 3/16" 724x4 72x4 726x4 728x4 728x8 7212x4 7212x8 7212x x12 $ Male Run Tees Male Swivel Run Tees tube to male NPTF Tube OD Male NPTF Brass Opt Qty /32" 3/16" 714x4 71x4 716x4 718x4 718x8 7112x4 7112x8 7112x x12 $ tube to male NPTF Tube OD Male NPTF Brass Opt Qty /32" /32" -32 * 71S4x4 71Sx 71Sx4 71S8x4 71S8x8 71S12x8 71S12x12 71S16x12 71S16x16 * UNF - Straight thread, supplied with gasket. $

67 Stainless Steel Legris Push-In Suitable for many industries such as: chemical, food, packaging and medical. Technical characteristics: working temperature: -4 F to F working pressure: 43 PSI maximum Maximum circuit pressure depends equally on the type and diameter of the tube used. no silicone conforms to FDA and 1934/04 C standards Male Swivel lbows Compatible with a range of tubes: semi-rigid nylon tube flexible polyurethane tube low density polyethylene Teflon tube FP 140 stainless and copper tube (when grooved) Materials of construction: body - AISI 316 stainless backup washer - 316L stainless collet - 303L stainless seal - FKM O-ring Thread sealant does not come preapplied on male threads, allowing the appropriate sealant for the application to be applied by the user. Straight Male Connectors tube to male NPT tube to male NPT Tube OD Male NPT Stainless Steel $ Pkg Qty Tube OD Male NPT Stainless Steel $ Pkg Qty Unions qual lbow Union tube to tube tube to tube Tube OD Stainless Steel Pkg Qty Tube OD Stainless Steel Pkg Qty $ $79.70 Union Tees Bulkhead Connectors tube to tube to tube tube to tube Tube OD Stainless Steel Pkg Qty Tube OD Stainless Steel Pkg Qty $ $

68 Nickel-Plated Brass Legris Push-In Technical characteristics and materials of construction: body with external and internal nickel plating chemical (electroless) nickel plated working temperature: F to 180 F seal: Buna-N pressure: vacuum to 290 PSI Maximum circuit pressure depends equally on the type and diameter of the tube used. thread: length of threads in accordance with ISO 7.1 standards pre-applied thread sealant on all male NPT threads no silicone Female Connectors Features and benefits: nickel-plated push-to-connect fitting tube compatibility: urethane, nylon, polyethylene, Teflon, metallic tubes (stainless and copper, when grooved) Applications: A solution for pneumatic applications and fluids in aggressive environments where stainless is not necessary. various fluids: compressed air and fluids compatible with materials of construction typical industries: automotive, packaging, paper mills, wood working, factories with wash-down processes Male Connectors tube to female NPT Tube OD Female NPT Nickel-plated Brass Pkg Qty /32" Male Swivel lbows $ Tube OD /32" /32" /32" Male NPT -32 * -32 * tube to male NPT Nickel-plated Brass * UNF - Straight thread, supplied with gasket Male Run Swivel Tees $ Pkg Qty tube to male NPT tube to male NPT Tube OD Male NPT Nickel-plated Brass Pkg Qty Tube OD Male NPT Nickel-plated Brass Pkg Qty /32" /32" /32" -32 * * UNF - Straight thread, supplied with gasket $ /32" /32" /32" -32 * * UNF - Straight thread, supplied with gasket $

69 Nickel-Plated Brass Legris Push-In qual Unions Union lbows qual Union Tees Tube OD /32" tube to tube tube to tube tube to tube Nickel-plated Brass Nickel-plated Brass Nickel-plated Brass Pkg Qty $ $ $ Nylon/Nickel-Plated Brass Legris Push-In materials: - nickel-plated threads; black body is glass-filled nylon; Buna-N D seal; polypropylene release button; silicone free positive seal: sealing and holding is accomplished instantaneously reusable: connect and disconnect numerous times full flow: fitting seals on outside diameter of tubing working pressure: fittings rated to 290 PSI at ambient temperature. Maximum circuit pressure depends equally on the type and diameter of the tube used. working temperature: -4 F to 17 F pre-applied thread sealant on all tapered male pipe threads compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube vacuum capability: vacuum of 28" Hg (99% vacuum) Male Swivel Branch Tees Gripping Ring Technology Quick Connect and Disconnect: To connect, simply push tubing in. To disconnect, press the release ring towards the fitting and pull tubing out. No tools required. Male Swivel Run Tees Tube OD /32" /32" /32" /16" /16" /16" Male NPT -32 * -32 * tube to male NPT Nylon/Nickel-plated Brass * UNF - Straight thread, supplied with gasket $ Pkg Qty Tube OD /32" /32" /32" /16" /16" Male NPT -32 * 1/16" -32 * tube to male NPT Nylon/Nickel-plated Brass * UNF - Straight thread, supplied with gasket $ Pkg Qty 169

70 Nylon/Nickel-Plated Brass Legris Push-In "Hybrid" Male Connectors Male Swivel lbows Tube OD Tube OD /32" /32" /16" /16" /16" fractional inch tube to male BSPT Male BSPT Male NPT 1/16" Nickel-plated Brass Male Connectors tube to male NPT Nickel-plated Brass $ $ Opt Qty Opt Qty Tube OD /32" /32" /32" /16" /16" /16" Male NPT -32 * 1/16" -32 * -32 * tube to male NPT Nylon/Nickel-plated Brass * UNF - Straight thread, supplied with gasket Female Swivel lbows $ Opt Qty Female Connectors Tube OD Female NPT tube to female NPT Nylon/Nickel-plated Brass Opt Qty Tube OD /32" /32" /16" /16" Female NPT tube to female NPT Nickel-plated Brass $ Opt Qty /32" /16" /16" $

71 Nylon/Nickel-Plated Brass Legris Push-In 4 Male lbows xtended Male Swivel lbows Tube OD Male NPT fractional inch tube to male NPT fractional inch tube to male NPT Nylon/Nickel-plated Brass Nylon/Nickel-plated Brass Pkg Price Price Qty $ $ Unions Bulkhead Unions Union lbows Tube OD /32" /16" tube to tube tube to tube tube to tube Nylon Nylon Nylon Pkg Qty $ $ $ Y Male Swivel Connectors Y Connectors Union Tees Tube OD /32" /32" Male NPT tube to male NPT Nylon/Nickel-plated Brass $ Pkg Qty Tube OD /32" /16" tube to tube Nylon $ Pkg Qty Tube OD /32" /16" tube to tube Nylon $ Pkg Qty Tube OD /32" /16" Plugs tube Plastic $ Pkg Qty 171

72 Push-In Fitting Kit Kit includes plastic case with threaded connectors, threaded elbows and several tube to tube connector configurations found on pages A tubing cutter is also included in the kit. TFK $4.00 Kit contains the following parts: Qty Description tube to male NPT connector tube to male NPT connector tube to male NPT connector tube to male NPT connector tube to male NPT connector tube to male NPT connector tube to male NPT elbow tube to male NPT elbow tube to male NPT elbow tube to male NPT elbow tube to male NPT elbow tube to male NPT elbow tube to tube union tube to tube union tube to tube union Y connector Y connector Y connector tube to tube union tee tube to tube union tee tube to tube union tee tubing cutter Legris Modular Manifolds Manifold with push-to-connect ports OD NPT Number of Outlets A B C D /32" $

73 Legris Composite Mini Ball Valves Mini ball valves enable in-line opening and closing of a pneumatic circuit. Compact and lightweight, they are suited to all types of installations. Their screwdriver slot allows opening and closing even when access is difficult. The handle is differentiated by a blue color and marked with the corresponding pneumatic symbol in order to enable immediate identification by the user. 2-way, non-venting valve Materials: nylon body nickel-plated ball /32" /16" Technical specifications: suitable fluid: compressed air maximum pressure: 14 PSI vacuum capability: vacuum of 28" Hg (99% of vacuum) working temperature: -4 F to 17 F Legris Quick xhaust Valves The quick exhaust valve can be used in all pneumatic equipment. It dramatically increases system efficiency and speed of a cylinder by purging cylinder air at the cylinder port rather than the control valve. Materials: body: nickel-plated piston: polyurethane seals: nylon NPT Thread $ $ Technical specifications: working pressure: PSI to 10 PSI working temperature: 0 F to 160 F Legris Flow Control Valves Push-to connect, unidirectional flow control valves, with one-piece design. Controls the speed of a cylinder by regulating air exhaust. Intake air flows freely through the flow control and exhaust air is metered out through a specially designed fine adjustment screw. Control pressure range: 1 PSI to 14 PSI. Temperature range: 30 F to 160 F. compact flow control valves Tube OD NPT Pkg Qty /32" $ miniature exhaust flow control valves Tube OD NPT Pkg Qty /32" /32" * UNF - Straight thread, supplied with gasket Legris In-Line Flow Control Valves Push-to connect flow control valve for use where cylinder access is difficult or another fitting is attached to the cylinder port. Stackable using 2 joining clips supplied, or panel mountable using existing holes. Materials: body: nylon gripping ring: stainless adjustment screw: nickel-plated locking nut: nickel-plated Tube OD Pkg Qty /32" -32 * -32 * $ $ Technical specifications: working fluid: compressed air working pressure: 1 PSI to 14 PSI working temperature: 30 F to 160 F 173

74 Legris Threaded In-Line Flow Control Valves Threaded in-line flow control valves are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow. The valves may be installed as meter in or meter out devices. Technical specifications: working fluid: compressed air working pressure: 1 PSI to 14 PSI working temperature: 30 F to 160 F Materials: body: nylon with nickel plated thread adjustment screw: nickel-plated locking nut: nickel-plated threads: nickel-plated Tube OD $ Legris Non-Return In-Line Check Valves Allows air to pass in one direction while blocking flow in the other direction. A pressure of more than 7 PSI will overcome the spring pressure and allow flow. An arrow indicates free flow direction. Maximum working pressure: 14 PSI at ambient temperature (70 F) Tube OD Pkg Qty /32" 6mm /16" $ Legris In-Line Check Valves These in-line check valves allow air to pass in one direction while blocking flow in the other direction. Their extreme compactness and light weight make them suitable as a safety item in compressed air circuits. The body of the fitting contains an arrow to indicate the direction of flow. A pressure of more than 7 PSI will overcome the spring pressure, which is keeping the valve closed, thus allowing the passage of air. Meter out check valve. Technical specifications: working pressure: 1 PSI to 14 PSI at ambient temperature (70 F) Materials: body: nylon with nickel plated base pre-applied thread sealant on tapered threads Tube OD NPT /32" /32" -32 * * UNF - Straight thread, supplied with gasket $ Stainless Steel Legris Uni-Directional Check Valves Stainless valve blocks the fluid passage when the pressure differential is lower than 3.6 PSI. Technical specifications: working pressure: 7 PSI to 80 PSI working temperature: -4 F to 360 F Materials: body: 316L stainless shut-off valve: 316L stainless return spring: 302 stainless seals: Viton NPT Thread $

75 naturally transparent temperature range: -40 F to 16 F (working pressure given at 7 F) designed for use with the push-in fittings sold on pages Tubing Polyurethane Tubing excellent memory, flexibility and resistance to kinking good resistance to fuels and oils low gas and vapor permeability high compressive strength low compressive set and extractability levels outstanding abrasion resistance OD ID x.062" /32" x.094" x.160" x." x.3" Wall Thickness Working 7 F Length Price/Length ' roll 0' roll 0' roll 0' roll 0' roll $ Polyethylene Tubing designed for FDA applications temperature range: -0 F to 140 F (working pressure given at 70 F) designed for use with the push-in fittings sold on pages flexible, lightweight, low-density polyethylene (LDP) tubing for use with plastic or metal inserts with outer sleeve; ferrule or clamps formulated to resist stress cracking OD ID Wall Thickness Working 70 F Length Tubing Color Price/Length x.12" x.170" x." x.37" ' roll 0' roll 0' roll 0' roll natural natural natural natural $ OD ID Wall Thickness Working 70 F Length Tubing Color Price/Length x.170" x.170" x.170" x.170" x." x." ' roll 00' roll 00' roll 00' roll 00' roll 00' roll blue blue black natural black natural 0817BL0 0817BL 0817BR 0817CR 18BR 18CR $ naturally transparent temperature range: -60 F to 0 F (working pressure given at 7 F) designed for use with the push-in fittings sold on pages OD ID x.093" /32" x.6" 3/16" x.138" x.170" x.180" x.27" x.37" Wall Thickness Working 7 F Nylon 11 Tubing recommended for applications requiring low density, lightweight toughness, flexibility and chemical resistance 0' lengths are packaged in plastic bags. Length Price/Length 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll $ Tubing cutters sold on page

76 Legris Tubing Nylon 12 Tubing Nylon tubing is ideal for many industrial applications. It has optimum mechanical properties and good chemical, humidity and abrasive resistance. semi rigid tubing working temperature: -4 F to 17 F (working pressure given at 7 F) Wall Working Clear Black Blue Thickness Pressure Length OD ID at 7 F Price/Length Price/Length Price/Length x.093" /32" x.6" 3/16" x.138" x.18" /16" x.232" x.27" x.37" Wall Working Clear Black Blue Thickness Pressure Length OD ID at 7 F Price/Length PriceLength Price/Length x.093".016 /32" x.6".02 3/16" x.138".02 x.18".03 /16" x.232".040 x.27".00 x.37".063 * 3/16" size is nylon ' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 91P300 91P P00 * 91P600 91P P P60 94P300 94P P00 * 94P600 94P P P60 $ $ P301 91P P01 * 91P601 91P P P61 94P301 94P P01 * 94P601 94P P P61 Polyurethane - 9 Durometer Tubing $ $ working temperature: -40 F to 16 F (working pressure given at 7 F) 91P304 91P P604 91P P P64 94P304 94P P604 94P P P64 $ $ Wall Working Clear Black Blue Thickness Pressure Length OD ID at 7 F Price/Length Price/Length Price/Length x.066" /32" x.094" x.160" /16" x.216" x.24" x.32" ' roll 0' roll 0' roll 0' roll 0' roll 0' roll 91U3R00 91U04R00 91U6R00 91U08R00 91U60R00 91U62R00 $ U301 91U U601 91U U U61 $ U304 91U U604 91U U U64 $ Wall Working Clear Black Blue Thickness Pressure Length OD ID at 7 F Price/Length Price/Length Price/Length x.066" /32" x.094" x.160" /16" x.216" x.24" x.32" Polyurethane tubing has high flexibility and a small bend radius and thus is very good for applications where space is tight. For applications where the tubing will be exposed black tubing is recommended. 0' roll 0' roll 0' roll 0' roll 0' roll 0' roll 94U3R00 94U04R00 94U6R00 94U08R00 94U60R00 94U62R00 $ U301 94U U601 94U U U61 Fluoropolymer FP 140 Tubing $ FDA compliant materials maximum working temperature: 300 F (working pressure given at 7 F) 94U304 94U U604 94U U U64 Wall Working Clear Thickness Pressure Length OD ID at 7 F Price/Length x.06" ' roll 92T300 $6.80 x.17" ' roll Tubing cutters sold 92T600 on page x.30" ' roll 92T x.42" ' roll 92T $ Fluoropolymer tubing is of food quality and provides excellent resistance to aggressive and corrosive agents as well as high temperatures. 176

77 materials: - nickel-plated threads; black body is glass-filled nylon; Buna-N D seal; polypropylene release button; silicone free positive seal: sealing and holding is accomplished instantaneously reusable: connect and disconnect numerous times full flow: fitting seals on outside diameter of tubing working pressure: fittings rated to 290 PSI at ambient temperature working temperature: -4 F to 17 F pre-applied thread sealant on all tapered male pipe threads compatible tubing: semi-rigid nylon, polyurethane and polyethylene tube vacuum capability: vacuum of 28" Hg (99% vacuum) Male Connectors Metric Push-In Gripping Ring Technology Quick Connect and Disconnect: To connect, simply push tubing in. To disconnect, press the release ring towards the fitting and pull tubing out. No tools required. Female Connectors tube to male BSPT Tube OD Male BSPT Pkg Qty 4 mm 4 mm 6 mm 6 mm 8 mm 8 mm 8 mm mm mm $ Male Swivel lbows Tube OD Female BSPP Pkg Qty 4 mm 4 mm 6 mm 6 mm 8 mm 8 mm tube to female BSPP $ Male Swivel Branch Tees OD ID 4 mm x 2.7 mm 6 mm x 4 mm 8 mm x 6 mm tube to male BSPT Tube OD Male BSPT Pkg Qty 4 mm 4 mm 6 mm 6 mm 8 mm 8 mm 8 mm mm mm Wall Thickness.6 mm 1 mm 1 mm Working F $ tube to male BSPT Tube OD Male BSPT Pkg Qty 4 mm 4 mm 6 mm 6 mm 8 mm 8 mm Nylon Metric Tubing Rolls translucent color resistant to fungus, abrasion, moisture and UV radiation temperature range -60 F to 0 F (working pressure given at 7 F) Tubing cutters sold on page 331 Length Price/Length 2 m 2 m 2 m 2P0400 2P0600 2P0800 $ $

78 Unions Metric Push-In Union Tees Tube OD Tube OD Pkg Qty 4 mm 6 mm mm 6 mm 6 mm mm tube to tube Union lbows $ Tube OD Tube OD Pkg Qty 6 mm mm 6 mm mm tube to tube Bulkhead Unions $ Tube OD Tube OD Pkg Qty 6 mm mm 6 mm mm tube to tube Y Connectors $ Tube OD Tube OD Pkg Qty 6 mm 6 mm $8.6 Plugs Tube OD Tube OD Pkg Qty 6 mm 6 mm $7.90 Tube OD Tube OD Pkg Qty 6 mm mm 6 mm mm $ Male Connectors Male Swivel lbows tube to thread Tube OD Thread Pkg Qty 4 mm 4 mm 6 mm 6 mm 6 mm 8 mm 8 mm mm M 1/8 BSPP M 1/8 BSPP 1/4 BSPP 1/8 BSPP 1/4 BSPP 1/4 BSPP $ tube to thread Tube OD Thread Pkg Qty 4 mm 4 mm 6 mm 6 mm 6 mm 8 mm 8 mm mm M 1/8 BSPP M 1/8 BSPP 1/4 BSPP 1/8 BSPP 1/4 BSPP 1/8 BSPP $

79 materials: - body (straights) tube, supports and grippers: CA360 - forged elbows and tees: CA377 - O-ring: Buna-N working pressure: are suitable for use up to the maximum working pressure of the plastic tubing used. Also suitable for vacuum service. working temperature: -40 F to 212 F pre-applied thread sealant (Loctite 16) on all male pipe threads compatible tubing: SA J844 specifications: meets D.O.T FMVSS 71.6 and SA J1131, SA J and SA J D.O.T. Push-In tube to male NPT Tube OD Male NPT Pkg Qty Male lbows AQ69DOT4x2 AQ69DOT4x4 AQ69DOT6x4 $ Swivel Male lbows Male Connectors tube to male NPT Tube OD Male NPT Pkg Qty AQ69DOTS4x2 AQ69DOTS4x4 AQ69DOTS4x6 AQ69DOTS6x4 AQ69DOTS6x6 $ tube to male NPT Tube OD Male NPT Pkg Qty AQ68DOT4x2 AQ68DOT4x4 AQ68DOT4x6 AQ68DOT6x4 AQ68DOT6x6 $ Swivel Male Run Tees Union Connectors tube to male NPT Tube OD Male NPT Pkg Qty AQ71DOTS4x2 AQ71DOTS4x4 $ Tube OD Pkg Qty tube to tube AQ62DOT4 AQ62DOT6 $ Swivel Male Branch Tees Union Tees tube to tube Tube OD Male NPT Pkg Qty AQ72DOTS4x2 AQ72DOTS4x4 $ tube to tube Tube OD Pkg Qty AQ64DOT4 AQ64DOT6 $

80 materials: - bases are and bodies are glass reinforced nylon 12 - seals are low temperature Buna-N silicone free working pressure: vacuum to 27 PSI at ambient temperature maximum circuit pressure depends equally on the type and diameter of the tube used working temperature: -40 F to 230 F Straight Male Connectors Legris D.O.T. Push-In suitable fluids: compressed air only, lubricated or nonlubricated compatible tubing: SA J844 which also meets NHTSA FMVSS 6 specifications: meets D.O.T FMVSS 71.6 and SA J1131, and SA J These fittings are designed for use on all pneumatic circuits other than air brake assemblies between the frame and axle or between towed and towing vehicle. Straight Female Connectors tube to male NPTF tube to female NPTF Tube OD Male NPTF Pkg Qty Tube OD Female NPTF Pkg Qty /32" /32" 3/16" 3/16" DOT DOT 31111DOT 31114DOT DOT DOT DOT DOT DOT DOT DOT DOT DOT DOT $ /32" 3/16" DOT DOT DOT DOT DOT DOT $ Male lbows Male Branch Tees Tube OD /32" 3/16" Male NPTF tube to male NPTF Note: This fitting can be oriented 360 allowing proper positioning of the fitting. * nickel-plated construction Pkg Qty DOT 3911DOT * 39611DOT 39614DOT 39618DOT DOT DOT DOT DOT DOT DOT $ Tube OD /32" /32" 3/16" tube to male NPTF to tube Male NPTF Pkg Qty DOT DOT 3811DOT * 38611DOT 38614DOT 38618DOT DOT DOT DOT DOT DOT DOT $ Note: This fitting can be oriented 360 allowing proper positioning of the fitting. 180

81 Legris D.O.T. Push-In Male Run Tees Y Connectors tube to tube to male NPTF Tube OD Male NPTF Pkg Qty 3/16" 3311DOT * 33611DOT 33614DOT 33618DOT DOT DOT DOT DOT DOT DOT Note: This fitting can be oriented 360 allowing proper positioning of the fitting. * nickel-plated construction Unions $ male NPTF to tube Tube OD Male NPTF Pkg Qty /32" DOT DOT DOT $ Note: This fitting can be oriented 360 allowing proper positioning of the fitting. Union lbows tube to tube Tube OD Pkg Qty /32" 3/16" DOT 3600DOT 36600DOT DOT 3660DOT Union Tees $ tube to tube Tube OD Pkg Qty /32" 3400DOT 32600DOT DOT 3260DOT Y Unions $ tube to tube to tube Tube OD Pkg Qty /32" 3/16" DOT 3400DOT 34600DOT DOT 3460DOT $ tube to tube Tube OD Pkg Qty /32" DOT DOT DOT $

82 Legris D.O.T. Push-In Plug In lbow Plug In Run Tee Tube OD Pkg Qty DOT $3.40 Tube OD Pkg Qty DOT $9.8 Reducers Bulkhead Unions Tube OD Tube OD Pkg Qty /32" DOT DOT xpander $ tube to tube Tube OD Pkg Qty /32" DOT * DOT DOT DOT * * nickel-plated construction $ Tube OD Tube OD Pkg Qty /32" DOT $4.4 D.O.T. Brake Tubing Rolls meets Department of Transportation FMVSS-6 nylon material conforming to SA J844 shipped in lengths of 0' roll working pressure: 10 PSI temperature range: -40 F to 0 F OD Tubing Color 3/16" /8" black black blue red black blue red black black black J BL-0 J BL-0 J B-0 J R-0 J BL-0 J B-0 J R-0 J BL-0 J844--BL-0 J BL-0 $ Tubing cutters sold on page

83 Compression style air brake fittings utilizes ribbed sleeve for compression and positive grip. materials: machined from CA360, CA34, or CA377 pre-applied thread sealant (Loctite Vibra-Seal 16) on all male pipe threads working pressure: 10 PSI maximum working temperature: -40 F to 0 F compatible tubing: SA J844 type A and B specifications: meets D.O.T FMVSS 71.6 and SA J1131, and SA J2494 These fittings are designed for use in air brake systems or in cab controls. Brake Assembly Instructions: 1. Cut tubing squarely - maximum of 1 angle allowable. 2. Check that port or mating part is clean and free of debris. 3. Insert tubing into fittings until it bottoms on seat. 4. Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrenchtightened as indicated in the chart below. Tube 3/16" & /8" & Turns required to seal from hand-tight 2½ 3 4 3½ Sleeves Female Connectors ref. SA 011 ref. SA 03 BA Tube OD Pkg Qty 3/16" /8" 60NAB3 60NAB4 60NAB6 60NAB8 60NAB 60NAB12 Inserts $ Tube OD /8" /8" Pipe Thread Straight Thread 7/ / / / /16-11/16-13/ /16-18 Pkg Qty 66NAB42 66NAB44 66NAB62 66NAB64 66NAB86 66NAB88 66NAB6 66NAB8 $ Male Connectors for SA J844 Tubing Tube OD /8" ref. SA 01 Tube OD 3/16" /8" 302/304 Stainless Steel 63NAB4 63NAB6 63NAB8 63NAB 63NAB12 Straight Thread / / / /16-13/ Nuts $ Pkg Qty Pkg Qty 61NAB3 61NAB4 61NAB6 61NAB8 61NAB 61NAB12 $ ref. SA 02 BA Tube OD 3/16" 3/16" 3/16" /8" /8" Pipe Thread 1/16" Straight Thread /16-24 /16-24 / / / / / / / / /16-11/16-11/16-13/ / Pkg Qty 68NAB31VS 68NAB32VS 68NAB34VS 68NAB42VS 68NAB44VS 68NAB46VS 68NAB62VS 68NAB64VS 68NAB66VS 68NAB68VS 68NAB84VS 68NAB86VS 68NAB88VS 68NAB6VS 68NAB8VS 68NAB126VS 68NAB128VS 68NAB1212VS $

84 Unions Brake Male Run Tees Tube OD /8" Straight Thread 7/ / /16-13/ Pkg Qty 62NAB4 62NAB6 62NAB8 62NAB 62NAB12 Bulkhead Unions $ ref. SA 03 BA Tube OD /8" Pipe Thread Straight Thread 7/ / / / /16-11/16-13/ NAB42VS 71NAB44VS 71NAB64VS 71NAB66VS 71NAB86VS 71NAB88VS 71NAB8VS $ Pkg Qty 2 Tube OD Straight Thread 7/ / /16- Pkg Qty 62NABH4 62NABH6 62NABH8 Bulkhead Unions $ ref. SA 042 BA Male Branch Tees Tube OD Pipe Thread Straight Thread Pkg Qty Tube OD 3/16" /8" Straight Thread / / / /16-13/16-18 Pkg Qty 62NBH3 62NBH4 62NBH6 62NBH8 62NBH Bulkhead Unions $ /16" /8" 7/ / / / / / / / /16-11/16-11/16-13/ NAB32VS 72NAB42VS 72NAB44VS 72NAB62VS 72NAB64VS 72NAB644VS 72NAB66VS 72NAB84VS 72NAB86VS 72NAB88VS 72NAB8VS $ Union Tees Tube OD Straight Thread Pkg Qty /8" 7/ / /16-13/ NFBH4 62NFBH6 62NFBH8 62NFBH Bulkhead Union $ ref. SA 0401 BA Straight Tube OD Thread Pkg Qty /8" 7/ / /16-13/ NAB4 64NAB6 64NAB8 64NAB $ Tube OD Pipe Thread Pkg Qty 66NBH86 $

85 Brake Union lbows 4 lbows ref. SA 0302 BA Tube OD Straight Thread Pkg Qty Tube OD Pipe Thread Straight Thread Pkg Qty /8" 7/ / /16-13/ NAB4 6NAB6 6NAB8 6NAB $ /8" /8" 7/ / / / / / /16-11/16-11/16-13/ / NAB42VS 79NAB44VS 79NAB62VS 79NAB64VS 79NAB66VS 79NAB68VS 79NAB84VS 79NAB86VS 79NAB88VS 79NAB6VS 79NAB8VS 79NAB128VS $ Female lbows Male lbows ref. SA 03 BA Tube OD Pipe Thread Straight Thread Pkg Qty Tube OD Pipe Thread Straight Thread Pkg Qty 3/16" /8" / / / / / / /16-11/16-13/ NAB32 70NAB42 70NAB44 70NAB62 70NAB64 70NAB66 70NAB86 70NAB88 70NAB8 $ /16" 3/16" /8" /8" /16-24 / / / / / / / / /16-11/16-11/16-13/ / NAB32VS 69NAB34VS 69NAB42VS 69NAB44VS 69NAB46VS 69NAB62VS 69NAB64VS 69NAB66VS 69NAB68VS 69NAB84VS 69NAB86VS 69NAB88VS 69NAB6VS 69NAB8VS 69NAB128VS 69NAB1212VS $

86 Wilkerson Miniature Filters 1.69 (43) transparent bowl (7).72 (18) 1.60 (41) Bowl Removal Clearance With Transparent Bowl With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain F03-01A F03-02A $.7.7 F03-01M F03-02M excellent water removal efficiency micron element. oz. bowl maximum operating conditions: transparent bowl: 10 PSIG ( bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17 bar) and 32 F to 17 F (0 C to 80 C) $ F03-01AMB F03-02AMB $ F03-01MMB F03-02MMB $ metal bowl micron element.4 oz. bowl maximum operating conditions: transparent bowl: 10 PSIG ( bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17 bar) and 32 F to 10 F (0 C to 6. C) 2 0 With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain F08-01A F08-02A $ F08-01M F08-02M $ F08-01AMB F08-02AMB $ F08-01MMB F08-02MMB $ See pages for filter accessories. Wilkerson Miniature Regulators 2-12 PSI adjusting range balanced valve design self-relieving standard non-rising push/pull locking adjustment knob two NPT gauge ports standard on models without gauge, one NPT gauge port standard on models with gauge - can be used for additional outlet ports. models supplied without gauge use a GC6 gauge. panel mount nuts sold separately maximum operating conditions: 300 PSIG (.17 bar) and 32 F to 12 F (0 C to 2 C) With Gauge Without Gauge R03-01RG R03-02RG $ R03-01R R03-02R $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 186

87 0-12 PSI adjusting range balanced valve design self-relieving standard non-rising push/pull locking adjustment knob two NPT gauge ports standard on models without gauge, one NPT gauge port standard on models with gauge - can be used for additional outlet ports. models with gauge are supplied with a flush mount style gauge models supplied without gauge use a GC6 gauge. panel mount nuts sold separately maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) Wilkerson Miniature Regulators With Gauge Without Gauge R08-01RG R08-02RG $ R08-01R R08-02R $ Wilkerson Miniature Water Regulators 2-12 PSI adjusting range suitable for water and compressed air service construction - wetted parts non-relieving spring-loaded diaphragm panel mount nut included two NPT gauge ports standard models supplied without gauge use a GC6 gauge maximum operating conditions: 300 PSIG (.7 bar) and 40 F to 12 F (4.4 C to 2 C) With Gauge Without Gauge RB3-01RG RB3-02RG $ See pages for regulator accessories. RB3-01R RB3-02R Wilkerson Miniature Filter / Regulators $ PSI adjusting range micron element. oz. bowl self-relieving supplied with a GC6 gauge maximum operating conditions: transparent bowl: 12 PSIG (8.6 bar) and 40 F to 12 F (4.4 C to 2 C) metal bowl: 300 PSIG (.7 bar) and 40 F to 12 F (4.4 C to 2 C) transparent bowl With Transparent Bowl With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain BB3-01AG BB3-02AG $ BB3-01MG BB3-02MG $ BB3-01AGMB BB3-02AGMB $ BB3-01MGMB BB3-02MGMB $ FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 187

88 Wilkerson Miniature Filter / Regulators metal bowl 0-12 PSI adjusting range micron element.4 oz. bowl self-relieving supplied with a PSI flush mount style gauge maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain B08-01AG B08-02AG $ B08-01MG B08-02MG $ B08-01AGMB B08-02AGMB See pages for filter/regulator accessories. $ B08-01MGMB B08-02MGMB $ Wilkerson Miniature Lubricators transparent bowl 1 oz. bowl adjustable oil feed full view sight dome Do not fill under pressure. supply must be turned off and pressure bled from unit prior to adding oil. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 17 F (0 C to 80 C) With Transparent Bowl With Metal Bowl L03-01A L03-02A $ L03-01AMB L03-02AMB $ metal bowl oz. bowl adjustable oil feed full view sight dome fill under pressure design maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl With Metal Bowl L08-01A L08-02A $ See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. L08-01AMB L08-02AMB $

89 Wilkerson Miniature Combination Units (Filter, Regulator, Lubricator) maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 17 F (0 C to 80 C) Filter series F03: micron element. oz. bowl Regulator series R03: 2-12 PSI adjusting range balanced valve design self-relieving supplied with a GC6 gauge Regulator can be mounted with knob in up or down position. Lubricator series L03: 1 oz. bowl adjustable oil feed full view sight dome Included components: (2) adapters With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain C03-01A C03-02A $ C03-01M C03-02M $ C03-01AMB C03-02AMB $ C03-01MMB C03-02MMB $ maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) Filter series F08: micron element.4 oz. bowl Regulator series R08: 0-12 PSI adjusting range balanced valve design self-relieving supplied with a PSI flush mount style gauge Lubricator series L08:.6 oz. bowl adjustable oil feed full view sight dome Included components: (2) mounting brackets with joiner set With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain C08-01A C08-02A $ C08-01M C08-02M $ C08-01AMB C08-02AMB $ C08-01MMB C08-02MMB $ FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 189

90 Wilkerson line Compact Filters with guard micron element oz. bowl maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain F16-02A F16-03A F16-04A $ F16-02M F16-03M F16-04M $ F16-02AMB F16-03AMB F16-04AMB $ F16-02MMB F16-03MMB F16-04MMB $ (60) 7.36 (187) 1.02 (26) high flow capacity micron element 4 oz. bowl maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) with metal bowl 1.60 (41) Bowl Removal Clearance With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain F18-02A F18-03A F18-04A $ F18-02M F18-03M F18-04M $ F18-02AMB F18-03AMB F18-04AMB $ F18-02MMB F18-03MMB F18-04MMB $ Wilkerson line Standard Filters micron element oz. bowl maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) with guard With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain F26-02A F26-03A F26-04A $ F26-02M F26-03M F26-04M $ F26-02AMB F26-03AMB F26-04AMB $ F26-02MMB F26-03MMB F26-04MMB $ See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 190

91 Wilkerson line Standard Filters 2.90 (73) high flow capacity micron element 6 oz. bowl maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) (213) 1.02 (26) 2.00 (1) Bowl Removal Clearance with metal bowl With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain F28-03A F28-04A F28-06A $ F28-03M F28-04M F28-06M $ F28-03AMB F28-04AMB F28-06AMB $ F28-03MMB F28-04MMB F28-06MMB $ Wilkerson line Jumbo Filters micron element 1 qt. bowl maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) with guard With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain F30-06A F30-08A $ F30-06M F30-08M $ F30-06AMB F30-08AMB $ F30-06MMB F30-08MMB $ micron element 1 qt. bowl maximum operating conditions: metal bowl: 10 PSIG (.3 bar) and 32 F to 10 F (0 C to 6. C) 1½" 2" with metal bowl With Heavy Duty Metal Bowl Automatic Drain Manual Drain F3-0BAMB F3-0CAMB $ See pages for filter accessories. F3-0BMMB F3-0CMMB FRL's are designed for air service only, unless otherwise indicated. $ ratings at 10 PSIG inlet pressure. 191

92 Wilkerson Modular Coalescing Filters for removal of extremely fine oil mists, oil aerosols and microscopic particles A standard airline filter should be installed as a pre-filter when using a coalescing filter. 0. micron type B and micron type D elements are optional differential pressure indicator changes from green to red with pressure loss 0.01 micron type C element oz. bowl can be installed in modular system maximum operating conditions: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) with guard With Compact Transparent Bowl and Guard Automatic Drain Manual Drain M16-02A M16-03A M16-04A $ M16-02M M16-03M M16-04M $ micron type C element oz. bowl can be installed in modular system maximum operating conditions: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) with guard With Standard Transparent Bowl and Guard Automatic Drain Manual Drain M26-02A M26-03A M26-04A $ M26-02M M26-03M M26-04M $ micron type C element 1 qt. bowl maximum operating conditions: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) with guard With Jumbo Transparent Bowl and Guard Automatic Drain M30-04A M30-06A M30-08A $ See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 192

93 Wilkerson Heavy Duty Modular Coalescing Filters for removal of extremely fine oil mists, oil aerosols and microscopic particles A standard airline filter should be installed as a pre-filter when using a coalescing filter. 1.0 micron type B1 and micron type D elements are optional differential pressure indicator changes from green to red with pressure loss 0.01 micron type C element 1 qt. bowl differential pressure indicator eliminates the guesswork of element placement maximum operating conditions: 10 PSIG (.3 bar) and 32 F to 10 F (0 C to 6. C) with metal bowl With Metal Bowl Automatic Drain 1¼" 741 M32-0AAMB $ micron type C element 1 qt. bowl differential pressure indicator eliminates the guesswork of element placement maximum operating conditions: 10 PSIG (.3 bar) and 32 F to 10 F (0 C to 6. C) with metal bowl With Metal Bowl Automatic Drain 1½" 2" 7 7 M3-0BAMB M3-0CAMB $ See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 193

94 Wilkerson Manual In-Line Desiccant Dryers Manual air dryers are used to remove water vapor from compressed air systems, in applications such as paint spraying, laboratory instruments and small control air systems. Filtration for absorber type dryers is important to protect the desiccant bed from contamination. Cleaner incoming air will result in better performance, longer life and fewer service problems. To regenerate silica gel desiccant, it must be heated to at least 30 F for approximately 3 hours or until color has changed from pink to blue. Allow desiccant to cool to room temperature before pouring back into unit bowl. An after-filter should be placed downstream from the desiccant dryer to ensure solid contaminants such as desiccant dust do not migrate downstream lb. bowl will dry up to 4400 standard cubic feet of air desiccant is good for approximately 440 minutes at maximum continuous air flow before regeneration is required silica gel changes from blue to pink to indicate the need to replace or regenerate the desiccant slotted bowl guard for visual detection of color change no electrical connection necessary provides atmospheric dew point of -4 F with dry desiccant at 0 PSI and 70 F maximum operating conditions: transparent bowl: 10 PSIG ( bar) and 12 F (2 C) metal bowl: 10 PSIG ( bar) and 10 F (66 C) with metal bowl With Transparent Bowl With Metal Bowl X03-02 $314.0 X03-02MB $ See page 8 for silica gel refill. Wilkerson Dial Regulators Dial-air regulators feature a transparent, pressure-calibrated, non-rising adjustment dial for quick adjustment of secondary pressure. The full reduced pressure range can be dialed in less than 270 of dial rotation. This feature is particularly advantageous if secondary pressure must be changed frequently. Dial air regulators can be mounted in any position so dial face is always visible. All dial-air units have a slight constant air bleed (33.8) 2.24 (6.9) 3.19 (81).9 (24) PSI adjusting range balanced valve design relieving type non-rising pressure adjusting dial piston operated two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports. models supplied without gauge use a GC230 gauge maximum supply pressure: 300 PSIG (.7 bar) operating temperature: 32 F to 10 F (0 C to 6. C) With Gauge Without Gauge R21-02RG R21-03RG R21-04RG R21-06RG $ R21-02R R21-03R R21-04R R21-06R $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 194

95 Wilkerson Compact Regulators 0-12 PSI adjusting range for 0-60 PSI adjusting range, add an L to the end of the part number self-relieving standard can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C). (132) 1. (31) 3.00 (76) With Gauge Without Gauge R16-02RG $6.70 R16-02R $86.00 R16-03RG 6.70 R16-03R R16-04RG 6.70 R16-04R PSI adjusting range self-relieving standard can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. Two ¼" NPT gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges. models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C).3 (136) 2.36 (60) 1.74 (44) With Gauge Without Gauge R18-02RG $92. R18-02R $71.8 R18-03RG 92. R18-03R 71.8 R18-04RG 92. R18-04R 71.8 Wilkerson Standard Regulators 0-12 PSI adjusting range non-rising push/pull locking adjustment knob panel mount nut standard excellent flow characteristics can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) With Gauge Without Gauge R26-02RG $11.70 R26-02R $ R26-03RG R26-03R R26-04RG R26-04R See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 19

96 Wilkerson Standard Regulators (149) 2.90 (73) With Gauge 1.74 (44) Without Gauge R28-03RG R28-04RG R28-06RG $ PSI adjusting range self-relieving standard four adjusting pressure ranges available To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. Two ¼" NPT gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges. models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) R28-03R R28-04R R28-06R $ Wilkerson High Flow Regulators 0-12 PSI adjusting range self-relieving standard piston operated can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) ¾" 1¼" With Gauge Without Gauge R30-06RG R30-08RG R30-0ARG $ R30-06R R30-08R R30-0AR $ PSI adjusting range self-relieving standard piston operated can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC230 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) 1½" 2" With Gauge Without Gauge R40-0BRG R40-0CRG $ R40-0BR R40-0CR $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 196

97 Wilkerson High Pressure Compact Regulators 0- PSI adjusting range self-relieving standard non-rising push/pull locking adjustment knob panel mount nut standard excellent flow characteristics can be installed with the adjusting knob in any position two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC240 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C). (132) 1. (31) 3.00 (76) With Gauge Without Gauge R16-02RHG R16-03RHG R16-04RHG $ R16-02RH R16-03RH R16-04RH $ Wilkerson High Pressure Standard Regulators 0- PSI adjusting range self-relieving standard non-rising push/pull locking adjustment knob panel mount nut standard excellent flow characteristics can be installed with the adjusting knob in any position two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC240 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) With Gauge Without Gauge R26-02RHG R26-03RHG R26-04RHG $ R26-02RH R26-03RH R26-04RH $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 197

98 Wilkerson High Pressure High Flow Regulators PSI adjusting range self-relieving standard piston operated can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC240 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) ¾" 1¼" With Gauge Without Gauge R30-06RHG R30-08RHG R30-0ARHG $ R30-06RH R30-08RH R30-0ARH $ PSI adjusting range self-relieving standard piston operated can be installed with the adjusting knob in any position To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise. two ¼" NPT gauge ports standard on models without gauge, one ¼" NPT gauge port standard on models with gauge - can be used for additional outlet ports models supplied without gauge use a GC240 gauge maximum operating conditions: 300 PSIG (.7 bar) and 32 F to 10 F (0 C to 6. C) 1½" 2" With Gauge Without Gauge R40-0BRHG R40-0CRHG $ R40-0BRH R40-0CRH $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 198

99 Wilkerson Compact Filter / Regulators Over-under units are space savers and provide for installation in tight areas. One common inlet/outlet for both filter and regulator saves on piping costs PSIG adjusting range micron reusable element oz. bowl self-relieving standard diaphragm operated quick-disconnect bowl guard with integral plastic bowl and safety latch standard Two ¼" gauge ports are provided in either side of the regulator body for installation of a gauge or to use as an additional outlet port. Plug unused port(s). supplied with GC230 gauge maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) with guard With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain CB6-02AG CB6-03AG CB6-04AG $ CB6-02MG CB6-03MG CB6-04MG $ CB6-02AGMB CB6-03AGMB CB6-04AGMB $ CB6-02MGMB CB6-03MGMB CB6-04MGMB $ PSIG adjusting range micron element 4 oz. bowl self-relieving standard spring-loaded diaphragm To increase regulated pressure, pull adjusting knob and turn clockwise. To reduce pressure, turn knob counter clockwise. To lock knob, push down. Two ¼" gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges. Plug unused port(s). supplied with GC230 gauge maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C).00 (24) 2.36 (60) 3.66 (93) 1.60 (41) Bowl Removal Clearance with metal bowl With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain B18-02AG B18-03AG B18-04AG $ B18-02MG B18-03MG B18-04MG $ B18-02AGMB B18-03AGMB B18-04AGMB $ B18-02MGMB B18-03MGMB B18-04MGMB $ See pages for filter/regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 199

100 Wilkerson Standard Filter / Regulators with metal bowl (291) 2.90 (74) 2.00 (1) Bowl Removal Clearance 4.09 (4) 0-12 PSIG adjusting range micron element 6 oz. bowl self-relieving standard spring-loaded diaphragm To increase regulated pressure, pull adjusting knob and turn clockwise. To reduce pressure, turn knob counter clockwise. To lock knob, push down. Two ¼" gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges. Plug unused port(s). supplied with GC230 gauge maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain B28-03AG B28-04AG B28-06AG $ B28-03MG B28-04MG B28-06MG $ B28-03AGMB B28-04AGMB B28-06AGMB $ B28-03MGMB B28-04MGMB B28-06MGMB $ See pages for filter/regulator accessories. ratings at 0 PSIG inlet pressure. Wilkerson conomist Type Lubricators Designed so that all the oil flow observed in the sight dome is broken into a mist and delivered via the airflow to the application. The oil in the bowl can be filled or replenished without interrupting airflow or bleeding pressure from the system. Once the oil-fill cap is removed, the bowl is depressurized and isolated from line pressure, and the bowl itself can then be removed for faster refill, if desired. The bowl can be filled right to the top. oz. bowl full view sight dome fill under pressure design maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) with metal bowl With Transparent Bowl With Metal Bowl L16-02A L16-03A L16-04A $ L16-02AMB L16-03AMB L16-04AMB $ See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 0

101 Wilkerson Lubricators Flow Guide The elastomer disc-shaped device is located in the throat of all Wilkerson lubricators and automatically maintains a constant ratio of oil flow to airflow regardless of changing rates of airflow. This allows one lubricator to serve several pneumatic components operating together or intermittently. Type of oil to use: For all Wilkerson lubricators, use any petroleum-base, non-detergent light weight oil (SA /10SSU) which will readily break up into a mist, i.e., Mobil DT light or comparable oil. Do not use any synthetic oil or oils containing additives or solvents. See page 137 for air tool lubricants. Wilkerson conomist Compact Lubricators 4.09 oz. bowl manual drain high flow capacity can be filled under pressure To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit. Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery. If flow increases or decreases, the oil delivery rate will increase or decrease proportionally. Turning the sight dome clockwise will stop all oil delivery. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) (41) Bowl Removal Clearance FRL's are designed for air service only, unless otherwise indicated (2) 2.36 (60) Wilkerson conomist Standard Lubricators See pages for lubricator accessories. See page 137 for air tool lubricant (9) with metal bowl With Transparent Bowl With Metal Bowl L18-02A L18-03A L18-04A $ L18-02AMB L18-03AMB L18-04AMB $ oz. bowl adjustable oil feed can be filled under pressure quick-disconnect metal bowl guard with integral safety latch siphon tube filter provides clean lubricant downstream The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and clockwise for less oil delivery. If flow increases or decreases, the oil delivery rate will increase or decrease proportionally. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) with metal bowl metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) * metal bowl has sight gauge with petcock drain With Transparent Bowl With Metal Bowl * L26-02A L26-03A L26-04A $ L26-02AMB L26-03AMB L26-04AMB $ ratings at 10 PSIG inlet pressure. 1

102 Wilkerson conomist Standard Lubricators with metal bowl 8.40 (213) 2.90 (73) 1.02 (26) 2.00 (1) Bowl Removal Clearance 6.11 oz. bowl manual drain high flow capacity can be filled under pressure To adjust and set oil delivery rate the unit must be pressurized and air must be flowing through the unit. Turn the sight dome, located on the top of the unit, counter clockwise to initiate oil delivery. If flow increases or decreases, the oil delivery rate will increase or decrease proportionally. Turning the sight dome clockwise will stop all oil delivery. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl With Metal Bowl L28-03A L28-04A L28-06A $ L28-03AMB L28-04AMB L28-06AMB $ ratings at 10 PSIG inlet pressure. with metal bowl 26 oz. bowl transparent bowl: no drain metal bowl: manual petcock drain can be filled under pressure The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and clockwise for less oil delivery. The oil delivery rate will change automatically to deliver more oil during higher air flows and less oil for air flows lower than the one at which the setting was made. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl With Metal Bowl L30-06A L30-08A $ L30-06AMB L30-08AMB $ See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 1 PSIG inlet pressure. 2

103 Wilkerson conomist Standard Lubricators 26 oz. bowl transparent bowl: solid bottom metal bowl: manual drain with sight glass full view sight dome adjustable oil feed can be filled under pressure quick-disconnect clamp ring for easy bowl removal The rate of oil delivery may be controlled by turning the adjusting screw counter clockwise for more and clockwise for less oil delivery. The oil delivery rate will change automatically to deliver more oil during higher air flows and less oil for air flows lower than the one at which the setting was made. maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (14 bar) and 32 F to 10 F (0 C to 6. C) illustration represents L40 series with metal bowl 1¼" 1½" 2" With Transparent Bowl With Metal Bowl L40-0AA L40-0BA L0-0CA $ L40-0AAMB L40-0BAMB L0-0CAMB $ See pages for lubricator accessories. See page 137 for air tool lubricant. ratings at 1 PSIG inlet pressure. Wilkerson Compact Combination Units maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 17 F (0 C to 80 C) Filter series F16: micron element oz. bowl Regulator series R16: 0-12 PSI adjusting range self-relieving supplied with a GC230 gauge Lubricator series L16: oz. bowl adjustable oil feed full view sight dome Included components: (2) modular sleeves (2) mounting brackets (sleeve and bracket) (2) end blocks with metal bowl With Transparent Bowl and Guard Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain C16-02A C16-03A C16-04A $ C16-02M C16-03M C16-04M $ C16-02AMB C16-03AMB C16-04AMB $ C16-02MMB C16-03MMB C16-04MMB $ FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 3

104 Wilkerson Compact Combination Units 2.31 (9) 7.77 (197) maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. C) with metal bowl 1.60 (41) Bowl Removal Clearance 8.66 (2) Filter series F18: micron element 4 oz. bowl Regulator series R18: 0-12 PSI adjusting range self-relieving supplied with a GC230 gauge Lubricator series L18: 4.09 oz. bowl adjustable oil feed full view sight dome Included components: (2) end blocks (2) mounting brackets with joiner set and port O-ring With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain C18-02A C18-03A C18-04A $ C18-02M C18-03M C18-04M $ C18-02AMB C18-03AMB C18-04AMB $ C18-02MMB C18-03MMB C18-04MMB $ Wilkerson Standard Combination Units maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 17 F (0 C to 80 C) with metal bowl Filter series F26: micron element oz. bowl Regulator series R26: 0-12 PSI adjusting range self-relieving supplied with a GC230 gauge Lubricator series L26: oz. bowl adjustable oil feed full view sight dome Included components: (2) modular sleeves (2) mounting brackets (sleeve and bracket) (2) end blocks With Transparent Bowl and Guard With Metal Bowl Automatic Drain Manual Drain Automatic Drain Manual Drain C26-02A C26-03A C26-04A $ C26-02M C26-03M C26-04M $ C26-02AMB C26-03AMB C26-04AMB $ C26-02MMB C26-03MMB C26-04MMB $ FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 4

105 modern design and appearance quick disconnect bowl / bowl guard Wilkerson Standard Combination Units maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 10 F (0 C to 6. F) metal bowl: PSIG (17.2 bar) and 32 F to 10 F (0 C to 6. F) 2.6 (6) 9.32 (237) 9.92 (22) Filter series F28: micron element 6 oz. bowl Regulator series R28: 0-12 PSI adjusting range self-relieving supplied with a GC230 gauge Lubricator series L28: 6.11 oz. bowl adjustable oil feed full view sight dome Included components: (2) end blocks (2) mounting brackets with joiner set and port O-ring 2.00 (1) Bowl Removal Clearance with metal bowl With Transparent Bowl and Guard With Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain C28-03A C28-04A C28-06A $ C28-03M C28-04M C28-06M $ C28-03AMB C28-04AMB C28-06AMB ratings at 10 PSIG inlet pressure. $ C28-03MMB C28-04MMB C28-06MMB $ Wilkerson Jumbo Combination Units high flow capacity large bowl reservoir maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 17 F (0 C to 80 C) Filter series F30: micron element 1 qt. bowl Regulator series R30: 0-12 PSI adjusting range self-relieving supplied with a GC230 gauge Lubricator series L30: 26 oz. bowl adjustable oil feed full view sight dome Included components: (2) hex nipples with metal bowl With Transparent Bowl and Guard Metal Bowl with Sight Glass Automatic Drain Manual Drain Automatic Drain Manual Drain C31-06A C31-08A $ C31-06M C31-08M $ C31-06AMB C31-08AMB $ C31-06MMB C31-08MMB $ FRL's are designed for air service only, unless otherwise indicated. ratings at 1 PSIG inlet pressure.

106 Wilkerson Combination Unit with Protective Frame Provides downstream air preparation with protective frame and includes components: C31-08AMB FRL with metal bowls and auto drain filter BBLV0 ball valve and AM12 air king on inlet port BBV0DTW 2-way ball valve installed between regulator and lubricator provides option for non-lubricated air heavy duty frame protects air prep components operating conditions: maximum pressure: PSIG temperature range: 40 F to 10 F : 3 FRL with protective frame C31-08FRAM $ FRL's are designed for air service only, unless otherwise indicated. 6

107 Wilkerson Automatic Drain As liquid contaminants collect in the bowl, they raise a closed-cell cellular float. When the liquid level reaches a given point, the float triggers a mechanism which pilots line pressure against a large area piston or diaphragm which snaps open the drain valve. The contaminants are discharged from the drain orifice at line pressure. As the liquid level falls, the pilot valve closes, line pressure against the piston/diaphragm returns to atmosphere and the drain valve snaps closed. A NPT drain discharge orifice allows the liquid discharge to be piped to a container or sewer. oz. bowl fully automatic, float operated full ½" NPT drain inlet quick-disconnect clamp ring for easy bowl removal when servicing no electrical connections easily installed maximum operating conditions: transparent bowl: 10 PSIG (.3 bar) and 32 F to 12 F (0 C to 2 C) metal bowl: 0 PSIG (13.8 bar) and 32 F to 10 F (0 C to 6. C) With Transparent Bowl With Metal Bowl X02-04 $1.4 X02-04MB $ with metal bowl Wilkerson Automatic Drain Valve Automatically drains liquid water and oil from compressed air receivers and systems. Drain valve automatically opens and closes every time the system pressure drops approximately to PSIG (0.7 to 1.4 bar) during the compressor cycle. An internal piston design, which utilizes no floats, minimizes the risks associated with drain failures. for up to 0 HP compressors maximum pressure: 0 PSIG (13. bar) temperature range: 32 F to 10 F (0 C to 6. C) minimum differential pressure required: PSIG (1.4 bar) inlet/outlet ports: ¼" NPT (F) screen adapter: NPT (M) inlet, ¼" NPT (M) outlet X1-02 $ FRL's are designed for air service only, unless otherwise indicated. 7

108 FRP-9-11 Wilkerson Filter Accessories lements Used On Description F00 F03 F08 F16 F18 F26 F28 F30 F3 F42 micron element micron element micron element micron element micron element micron element micron element micron element micron element micron element FRP-9-23 PS403 FRP FRP FRP FRP-9-11 FRP FRP-9-9 FRP-9-0 FRP-9-66 $ MTP-9-48 lements Used On Description M16, M26, M30 M16 M26 M30 M3 type B element (0. micron) type C element (0.01 micron) type C element (0.01 micron) type C element (0.01 micron) type C element (0.01 micron) MSP MTP-9-48 MTP-9-49 MTP-9-1 MTP-9-02 $ Gel Refills Used On Description X03 8 bags of silica gel refill DRP-8-09 $39.0 FRP-9-01 Bowls and Bowl Guards Used On Description F00 F03 F08 F16, M16 F18 F26, M26 F28 F30, M30 plastic bowl with check valve drain metal bowl with manual drain plastic bowl with piston drain metal bowl with manual drain plastic bowl with guard and manual drain metal bowl with manual drain plastic bowl and metal bowl guard with flex tip drain plastic bowl and metal bowl guard with auto drain metal bowl with sight glass and manual drain metal bowl with auto drain plastic bowl, bowl guard, manual drain plastic bowl, bowl guard, auto drain metal bowl with sight glass, manual drain metal bowl with sight glass, auto float drain plastic bowl and metal bowl guard with flex tip drain plastic bowl and metal bowl guard with auto drain metal bowl with sight glass and manual drain metal bowl with auto drain plastic bowl with guard, auto drain plastic bowl, bowl guard, manual drain metal bowl, with sight glass, manual drain metal bowl with sight glass, auto float drain plastic bowl and metal bowl guard with manual drain plastic bowl and metal bowl guard with auto drain plastic bowl with flex tip drain metal bowl with sight glass and manual drain metal bowl with auto drain GRP-96-3 GRP PS408B PS447B GRP GRP FRP FRP-9-01 GRP FRP-9-90 GRP GRP GRP GRP GRP-9-93 GRP GRP GRP GRP GRP GRP GRP FRP FRP-9-77 FRP GRP GRP $

109 F00 Auto and Manual Drains Used On Description F08 F16, F18, F26, F28, F30, F3, M16, M26, M30, M32, M3 F16, F18, F26, F28, F30, M16, M26, M30 F16, F18, F26, F28, F30, F3, M16, M26, M30, M3 F16, F26, F30, M16, M26, M30 F16, F26, F30, M16, M26, M30 F18, F28 automatic drain manual drain automatic drain automatic drain with flourocarbon seal automatic float drain with a nitrile seal manual override drain manual pet cock drain for use with metal bowl units manual flex tip drain manual drain Wilkerson Filter Accessories GRP-9-84 GRP-96-2 GRP GRP GRP GRP GRP FRP-9-6 GRP $ GRP Sight Glass Used On Description M16, M26 sight glass kit for metal bowls GRP $1.30 GRP Mounting Brackets and Joiner Sets Used On Description F00 F03 F08 F16, M16 F18 F18, F28 F26, M26 F28 F30 mounting bracket (type L) mounting bracket mounting bracket (type T) with joiner set and port O-ring mounting bracket (type C) joiner set and port O-ring mounting bracket (type L) mounting bracket (type C) mounting bracket (type L) mounting bracket (type T) mounting bracket (type T) with joiner set and port O-ring joiner set and port O-ring with nitrile O-ring joiner set with port O-ring with fluorocarbon O-rings bracket with joiner set and port O-ring mounting bracket (type L) mounting bracket (type C) mounting bracket (type L) wall mount, U-bolt pipe clamp GRP-9-74 PS417B GPA GPA-97-0 GPA GPA GPA GPA GPA GPA GPA GPA GPA GPA GPA GPA GRP $ GPA Designed for mounting a single unit or combination of units directly to the wall. The sleeve and mounting bracket can be ordered assembled from the factory, or just the mounting bracket alone to be used on existing modular sleeves. Used On Description F16, F26 bracket sleeve and bracket Modular Sleeve with Wall Mounting Brackets GPA GPA $ GPA

110 Wilkerson Filter Accessories Modular Sleeve Unique modular sleeve design easily and quickly connects one or more units and accessories together without pipe nipples. Hand tightening the threaded pin provides a tight seal between the units. GPA Used On Description F16, F26 modular sleeve GPA $17.00 nd Blocks When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet and outlet) Used On Description GPA F08 end block set, NPT end block set, NPT GPA GPA-97-0 $ GPA Modular Blocks Manifold Block allows easy design flexibility can be installed after the filter or regulator, providing three additional ¼" NPT tapped auxiliary ports inlet/outlet ports are non-tapped 1-17/32" width nd Block When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet and outlet) Used On Description GPA GPA-96-6 F16, M16, F26, M26 F18, F28 manifold block, three NPT auxiliary ports end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, G end block, G end block, G end block, G GPA GPA GPA GPA-9-22 GPA-9-3 GPA GPA-96-6 GPA GPA GPA GPA-96-6 GPA GPA GPA $ Modular Adapters When used with the modular sleeve, adapter inserts allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks Used On Description GPA F16, M16, F26, M26 NPT pipe adapter NPT pipe adapter NPT pipe adapter GPA-9-03 GPA GPA $

111 Used On Description F16, F26 NPT safety shut-off valve NPT safety shut-off valve NPT safety shut-off valve Wilkerson Filter Accessories Modular Shut-Off Valves can be installed immediately upstream of a single unit or combination of units secured to the unit with a modular sleeve or modular sleeve wall mounting bracket ball-type valve operates with a 1/4 turn from open to shut position useful for isolating and depressurizing a downstream unit requiring maintenance or replacement can be locked in the open position left to right flow GPA GPA GPA $ GPA Differential Pressure Indicators used to replace damaged indicators on filters and modular coalescing filters Pressure loss changes color of indicator window from green to red. Used On Description M16, M26, M30, M32 F3,M3 indicator indicator DP DP $ DP Wilkerson Regulator Accessories Replacement Springs Used On Description R16 R18 R26 R PSI spring 0-12 PSI spring 0-12 PSI spring 0-60 PSI spring 0-12 PSI spring 0-12 PSI spring RRP RRP RRP RRP GRP-9-22 RRP $ RRP Gauges for units originally purchased with flush mounted gauge Used On Description R PSI, flush mount design GRP $27.0 GRP Tamper Resistant Kit Used On Description R00,R08 R16,R26 R18 R28 ring style tamper resistant kit ring style tamper resistant kit ring style tamper resistant kit ring style tamper resistant kit RPA RPA RRP RRP $ RPA

112 Wilkerson Regulator Accessories Repair Kits Used On Description RRP-9-92 R16 R18 R26 R28 R30 R40 self-relieving repair kit relieving diaphragm assembly self-relieving repair kit relieving diaphragm assembly valve assembly: valve, spring, bottom plug O-ring valve assembly: valve, spring, retaining ring, O-ring RRP RRP RRP-9-92 RRP RRP-9-19 RRP $ Mounting Brackets and Joiner Sets Used On Description GPA R00, RB3 R03 R08 R16 R16, R21, R26, R30, R40 R26 R30 mounting bracket (type L) and nut mounting bracket mounting bracket (type T) with joiner set mounting bracket (type C) mounting bracket (type L) joiner set with port O-ring mounting bracket (type L) and nut wall mount bracket with ¼" NPT gauge port adapter mounting bracket (type C) and nut wall mount, U-bolt pipe clamp GRP PS417B GPA GPA-97-0 GRP GPA GPA RRP-9-90 RPA GRP $ Modular Sleeve with Wall Mounting Brackets Designed for mounting a single unit or combination of units directly to the wall. The sleeve and mounting bracket can be ordered assembled from the factory, or just the mounting bracket alone to be used on existing modular sleeves. Used On Description GPA R16, R26 bracket sleeve and bracket GPA GPA $ Modular Sleeve Unique modular sleeve design easily and quickly connects one or more units and accessories together without pipe nipples. Hand tightening the threaded pin provides a tight seal between the units. GPA Used On Description R16, R26 modular sleeve GPA $17.00 nd Blocks When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet and outlet) Used On Description GPA R08 end block set, NPT end block set, NPT GPA GPA-97-0 $

113 Wilkerson Regulator Accessories Modular Blocks Manifold Block allows easy design flexibility can be installed after the filter or regulator, providing three additional ¼" NPT tapped auxiliary ports inlet/outlet ports are non-tapped 1-17/32" width nd Block When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet & outlet) GPA Used On Description R16, R26 R18, R28 manifold block, three NPT auxiliary ports end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, G end block, G end block, G end block, G GPA GPA GPA GPA-9-22 GPA-9-3 GPA GPA-96-6 GPA GPA GPA GPA-96-6 GPA GPA GPA $ GPA GPA-96-6 Modular Adapters When used with the modular sleeve, adapter inserts allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks Used On Description R16, R26 NPT pipe adapter NPT pipe adapter NPT pipe adapter GPA-9-03 GPA GPA $ GPA Modular Shut-Off Valves can be installed immediately upstream of a single unit or combination of units secured to the unit with a modular sleeve or modular sleeve wall mounting bracket ball-type valve operates with a 1/4 turn from open to shut position useful for isolating and depressurizing a downstream unit requiring maintenance or replacement can be locked in the open position left to right flow Used On Description R16, R26 NPT safety lock-out valve NPT safety lock-out valve NPT safety lock-out valve GPA GPA GPA $ GPA see page 23 for replacement gauges 213

114 GRP Wilkerson Lubricator Accessories Bowls and Bowl Guards Used On Description L00, L03 L08 L16 L18 L26 L28 L30, L40 L30, L40, L0 metal bowl with manual drain plastic bowl with no drain metal bowl with manual drain plastic bowl with guard and manual drain metal bowl with sight glass and manual drain plastic bowl, bowl guard, manual drain plastic bowl with no drain metal bowl with sight glass, manual drain plastic bowl, bowl guard, manual drain metal bowl with sight glass and manual drain plastic bowl with no drain metal bowl with sight glass, manual drain plastic bowl, bowl guard, manual drain metal bowl with sight glass and manual drain plastic bowl with no drain GRP PS421 GRP LRP GRP GRP LRP GRP LRP GRP LRP GRP LRP GRP LRP $ GRP Drains Used On Description L16, L26, L30, L40, L0 L18, L28 manual pet cock drain for use with metal bowl units manual drain GRP GRP $ LRP GPA Sight Domes and Fill Plugs Used On Description L00, L08, L16, L26 L08 L08, L18, L28 L16, L26 L16, L26, L30 L18, L28 L30, L40, L0 L40, L0 sight dome kit: dome and O-ring fill plug kit: fill plug and O-ring sight dome kit (old style -08) sight glass kit for metal bowls fill plug kit: fill plug and O-ring sight dome assembly (new style) sight dome kit: dome and O-ring fill plug kit: fill plug and O-ring LRP LRP LRP-96-7 GRP LRP-9-23 LRP-96-3 LRP LRP-9- $ Mounting Brackets Used On Description L00 L03 L08 L16 L18 L18, L28 L26 L28 L30 mounting bracket (type L) mounting bracket mounting bracket (type T) with joiner set and port O-ring mounting bracket (type C) joiner set and port O-ring mounting bracket (type L) mounting bracket (type C) mounting bracket (type L) mounting bracket (type T) mounting bracket (type T) with joiner set and port O-ring joiner set with port O-ring bracket with joiner set and port O-ring mounting bracket (type L) mounting bracket (type C) mounting bracket (type L) wall mount, U-bolt pipe clamp GRP-9-74 PS419 GPA GPA-97-0 GPA GPA GPA GPA GPA GPA GPA GPA GPA GPA GPA GRP $

115 Wilkerson Lubricator Accessories Designed for mounting a single unit or combination of units directly to the wall. The sleeve and mounting bracket can be ordered assembled from the factory, or just the mounting bracket alone to be used on existing modular sleeves. Used On Description L16, L26 bracket sleeve and bracket Modular Sleeve with Wall Mounting Brackets GPA GPA Modular Sleeve Unique modular sleeve design easily and quickly connects one or more units and accessories together without pipe nipples. Hand tightening the threaded pin provides a tight seal between the units. $ Used On Description L16, L26 modular sleeve GPA $17.00 GPA GPA nd Blocks When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet and outlet) Used On Description L08 end block set, NPT GPA $3.80 end block set, NPT GPA GPA Modular Blocks Manifold Block allows easy design flexibility can be installed after the filter or regulator, providing three additional ¼" NPT tapped auxiliary ports inlet/outlet ports are non-tapped 1-17/32" width nd Block When used with the modular sleeve, end blocks allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks (inlet and outlet) Used On Description L16, L26 L18, L28 manifold block, three NPT auxiliary ports end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, NPT end block, G end block, G end block, G end block, G GPA GPA GPA GPA-9-22 GPA-9-3 GPA GPA-96-6 GPA GPA GPA GPA-96-6 GPA GPA GPA $ GPA GPA GPA

116 GPA Wilkerson Lubricator Accessories Used On Description L16, L26 NPT pipe adapter NPT pipe adapter NPT pipe adapter Modular Adapters When used with the modular sleeve, adapter inserts allow a single unit or a combination of units to be piped into the air system in the modular mode. allows ease of unit servicing or replacement without disturbing the air line connections set of 2 blocks GPA-9-03 GPA GPA $ GPA Modular Shut-Off Valves can be installed immediately upstream of a single unit or combination of units secured to the unit with a modular sleeve or modular sleeve wall mounting bracket ball-type valve operates with a 1/4 turn from open to shut position useful for isolating and depressurizing a downstream unit requiring maintenance or replacement can be locked in the open position left to right flow Used On Description L16, L26 NPT safety lock-out valve NPT safety lock-out valve NPT safety lock-out valve GPA GPA GPA $ Wilkerson Filter/Regulator Accessories FRP Used On Description B08 CB6 B18 B28 micron element micron element micron element micron element lements FRP FRP FRP FRP $ GRP Bowls and Bowl Guards Used On Description B08 CB6 B18 B28 plastic bowl with guard and manual drain metal bowl with manual drain plastic bowl and metal bowl guard with flex tip drain plastic bowl and metal bowl guard with auto drain metal bowl with auto drain plastic bowl, bowl guard, manual drain plastic bowl, bowl guard, auto drain metal bowl with sight glass, manual drain metal bowl with sight glass, auto float drain plastic bowl with guard, auto drain plastic bowl, bowl guard, manual drain metal bowl, with sight glass, manual drain metal bowl with sight glass, auto float drain GRP GRP FRP FRP-9-01 FRP-9-90 GRP GRP GRP GRP GRP GRP GRP GRP $

117 Wilkerson Filter/Regulator Accessories Auto and Manual Drains Used On Description B08 CB6 CB6, B18, B28 B18, B28 automatic drain manual pet cock drain for use with metal bowl units manual flex tip drain automatic drain with flouracarbon seal automatic float drain with a nitrile seal manual override drain manual drain Accessories GRP GRP FRP-9-6 GRP GRP GRP GRP $ Used On Description CB6 sight glass kit for metal bowl GRP $1.30 GRP Replacement Springs Used On Description CB6 B18 B PSI spring 0-12 PSI spring 0-12 PSI spring 0-12 PSI spring RRP RRP RRP RRP $ RRP Tamper Resistant Kits Used On Description B08 B18 B28 ring style tamper resistant kit ring style tamper resistant kit ring style tamper resistant kit RPA RRP RRP $ Repair Kits Used On Description B18 B28 diaphragm assembly, relieving diaphragm assembly, relieving RRP RRP $ Mounting Brackets and Joiner Sets Used On Description R08 CB6 B18 B18, B28 B28 mounting bracket (type T) with joiner set mounting bracket (type C) mounting bracket (type L) joiner set with port O-ring mounting bracket (type L) and nut bracket, wall mount, gauge port adapter with ¼" NPT mounting bracket (type C) mounting bracket (type L) mounting bracket (type T) mounting bracket (type T) with joiner set joiner set with port O-ring bracket with joiner set and port O-ring joiner set mounting bracket (type C) mounting bracket (type L) GPA GPA-97-0 GRP GPA GPA RRP-9-90 GPA GPA GPA GPA GPA GPA GPA GPA GPA $ GPA

118 Wilkerson FRL Display Increase your sales with this heavy duty, point-of-purchase Dixon FRL Display, designed to highlight the features and benefits of a modular Filter-Regulator-Lubricator Combination Unit for air line services. The display is perfect for your "Will Call" or showroom sales area. The display features: FRL combination unit with standard metal bowl with sight glass manual drain modular mounting clamps pipe adapters Note: Assembly is required. WILK26DISPLAY $ Series 1 FRL Display Increase your sales with this heavy duty, point-of-purchase Dixon FRL Display, designed to highlight the features and benefits of a modular Filter-Regulator-Lubricator Combination Unit for air line services. The display is perfect for your "Will Call" or showroom sales area. The display features: 74 Series basic combination unit with metal bowl with sight glass manual drain modular mounting clamps pipe adapters Note: Assembly is required. NORG74DISPLAY $

119 Norgren Series 1 Carded Miniature FRL's Dixon offers the Series I line of miniature filters, filter/regulators, regulators and lubricators in prepackaged clear plastic units suitable for hanging on store peg racks or displays. The primary features of each unit are printed on the packaging. ach package contains 1 miniature filter, filter/regulator, regulator or lubricator and instruction sheet. micron element 1 oz. reservoir inlet pressure 10 PSI maximum at ambient temperature (70 F) Carded Miniature Filter with Transparent Bowl Port Automatic Drain Manual Drain 21 F07-0AC $60.9 F07-0MC $2.0-0 PSI range relieving type inlet pressure PSI at ambient temperature (70 F) maximum model supplied with a GC6 gauge Carded Miniature Regulator Port with Gauge 22 R07-0RGC $ PSI range relieving type micron element 1 oz. reservoir push to lock adjusting knob inlet pressure 10 PSI maximum at ambient temperature (70 F) model supplied with a GC6 gauge bowl guard not available Carded Miniature Filter/Regulator with Transparent Bowl Port Automatic Drain Manual Drain 21 B07-2AGC $12. B07-2MGC $ oz. reservoir inlet pressure 10 PSI maximum at ambient temperature (70 F) Carded Miniature Lubricator Port Transparent Bowl 14 L07-0AC $ (0) 0.33 (8) Miniature Non-Repairable General Purpose Regulators 1.6 (42) Dia (41) -12 PSI range lightweight construction left to right flow wrench flats for easy installation Relieving piston design allows reduction of downstream pressure when the system is dead-ended model supplied with a GC6 gauge Compact Port with Gauge without Gauge 13 R46-0RG $6.40 R46-0R $39.70 FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 219

120 Manual Drain Manual Drain Norgren Series 1 Miniature FRL's micron element 1 oz. reservoir Port inlet pressure 10 PSI maximum at ambient temperature (70 F) Miniature Filter with Transparent Bowl Automatic Drain Manual Drain F07-0A F07-0A $9. 9. F07-0M F07-0M $ (18) ** 6.07 (14) ** 1.63 (42) 0.91 (23) Automatic Drain 0.38 () 4. (4) Automatic Drain ** minimum clearance to remove bowl 4.2 (8) -0 PSI range regulation at flows up to 22 at relieving type 0 PSIG inlet pressure 300 PSI max. models supplied with a GC6 gauge at ambient temperature (70 F) Miniature Regulators Port with Gauge without Gauge R07-0RG R07-0RG $ R07-0R R07-0R $ (28) 1.63 (41) 0.9 (24) 2.2 (64) 2.91 (7) -0 PSI range relieving type micron element 1 oz. reservoir push to lock adjusting knob Miniature Filter/Regulator with Transparent Bowl Port Automatic Drain Manual Drain B07-2AG B07-2AG inlet pressure 10 PSI maximum at ambient temperature (70 F) models supplied with a GC6 gauge bowl guard not available $ B07-2MG B07-2MG $ (28) 8.41 (214) ** Manual Drain 8.26 (2) ** Automatic Drain 1.12 (28) 2.67 (68) 6.29 (160) Automatic Drain 1.63 (41) ** minimum clearance to remove bowl 6.44 (164) Manual Drain 1 oz. reservoir Port inlet pressure 10 PSI maximum at ambient temperature (70 F) Miniature Lubricators Transparent Bowl L07-0A L07-0A $ (183) ** Without Drain 7.60 (193) ** Manual Drain 1.63 (41) 0.38 () 1.6 (42).12 (130) Manual Drain ** minimum clearance to remove bowl 4.72 (1) Without Drain -12 PSI range 1 oz. reservoir Miniature Combination Unit with Transparent Bowl Port Automatic Drain Manual Drain P1A-0A P1A-0A models supplied with a GC6 gauge inlet pressure 10 PSI maximum at ambient temperature (70 F) $ P1A-0M P1A-0M Norgren Series 1 Micro Mate Combination Units FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. $ PSI range inlet pressure 10 PSI maximum at requires only 2 pipe connections ambient temperature (70 F) Miniature Filter/Regulator/Lubricator with Transparent Bowl Port Automatic Drain PTH-0AG PTH-0AG $ (64) 3.87 (98) Manual Drain 0.9 (24) 0.38 () 3.72 (94) Automatic Drain 3.07 (78) Without Drain 2.67 (68).47 (139) 0.38 () ** minimum clearance to remove bowl 1.12 (28) 3.87 (98) Manual Drain 3.72 (94) Automatic Drain 3.07 (78) Without Drain 3. (90) 0.38 () 1.6 (42) ** minimum clearance to remove bowl 1.6 (42) 8.31 (211) ** 8.31 (211) **

121 Norgren Series 1 line Filters 7.27 (18) (19) (134) 40 micron element 2 oz. reservoir quick-release bayonet bowl prismatic lens liquid level indicator particle removal per ISO 873-1, Class and Class 3 inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) Minimum clearance to remove bowl 0.7 (19) Port with Transparent Bowl Semi-Automatic Drain Manual Drain F72G-2A F72G-3A $ F72G-2M F72G-3M $ with transparent bowl with Metal Bowl and Sight Glass 7.27 (18).27 (134) Minimum clearance to remove bowl Port Semi-Automatic Drain Manual Drain F72G-2A-MB F72G-3A-MB $ F72G-2M-MB F72G-3M-MB $ with metal bowl 40 micron element 4 oz. reservoir quick-release bayonet bowl prismatic lens liquid level indicator particle removal per ISO 873-1, Class and Class 3 inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) with Transparent Bowl Port Automatic Drain Manual Drain F73G-2A F73G-3A F73G-4A $ F73G-2M F73G-3M F73G-4M $ with transparent bowl Port with Metal Bowl and Sight Glass Automatic Drain Manual Drain F73G-2A-MB F73G-3A-MB F73G-4A-MB $ F73G-2M-MB F73G-3M-MB F73G-4M-MB $ with metal bowl See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 221

122 Norgren Series 1 line Filters 40 micron element 7 oz. reservoir quick-release bayonet bowl prismatic lens liquid level indicator particle removal per ISO 873-1, Class and Class 3 inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) with transparent bowl Port with Transparent Bowl and Guard Automatic Drain Manual Drain F74G-3A F74G-4A F74G-6A $ F74G-3M F74G-4M F74G-6M $ with Metal Bowl and Sight Glass Port Automatic Drain Manual Drain F74G-3A-MB F74G-4A-MB F74G-6A-MB $ F74G-3M-MB F74G-4M-MB F74G-6M-MB $ with metal bowl 40 micron element 1 qt. reservoir general purpose with low pressure drop and excellent water removal characteristics Port ¾" 1¼" 1½" inlet pressure: PSI at ambient temperature (70 F) with Metal Bowl and Sight Glass Automatic Drain Manual Drain F17-600A F17-800A F17-A00A F17-B00A $ F17-600M F17-800M F17-A00M F17-B00M $ micron element 7 oz. reservoir inlet pressure: PSI at ambient temperature (70 F) 2" with Metal Bowl and Sight Glass Port Automatic Drain Manual Drain 2" 1400 F18-C00A $ F18-C00M $1232. See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 222

123 Norgren Series 1 Oil Removal (Coalescing) Filters in-line or modular installation quick-release bayonet bowl prismatic lens liquid level indicator provides air quality class 2 hydrocarbon and class 1 particulate removal per ISO element removes particles down to 0.01mm. Maximum remaining oil content of air leaving the filter is 0.01 ppm at 70 F (21 C) with an inlet concentration of 8 ppm service life indicator turns from green to red when element needs to be replaced For maximum service life install a general purpose filter upstream of the oil removal filter. Port Port Standard Flow with Metal Bowl Automatic Drain Saturated Dry 3 3 High Flow with Metal Bowl Automatic Drain Saturated Dry F74C-3A-MB F74C-4A-MB F74H-4A-MB F74H-6A-MB $ $ Norgren Series 1 Oil Vapor Removal Filters in-line or modular installation quick-release bayonet bowl Activated carbon cartridge filter element absorbs oil vapors and removes most hydrocarbon odors. provides air quality class 1 particulate removal per ISO 873-1, when used with the F74C series Filter and element designs optimizes air velocity and contact time to reduce oil content of air leaving the filter to ppm at 70 F (21 C). Minimum service life of 400 hours can be expected if the vapor removal filter is protected upstream by an oil removal (coalescing) filter and if the filtration temperature is in the region of 70 to 80 F (21 to 26 C). Above this range, oil vapor content of compressed air increases substantially and element service life is reduced. Carbon cartridge element provides long service life. For maximum service life install a general purpose filter and an oil removal filter upstream of the oil vapor removal filter. Port with Metal Bowl Automatic Drain F74V-3A-MB F74V-4A-MB F74V-6A-MB $ See pages for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 223

124 -10 PSI range inlet pressure: 300 PSI at ambient temperature (70 F) in-line or modular installation Port Norgren Series 1 Regulators two full flow NPT gauge ports models supplied with GC6 gauge For 0-60 PSI range, add an L to the end of the part number. with Gauge without Gauge R72G-2RG R72G-3RG -10 PSI range inlet pressure: 300 PSI at ambient temperature (70 F) in-line or modular installation relieving type Port $ R72G-2R R72G-3R $ two full flow NPT gauge ports models supplied with GC230 gauge For 0-60 PSI range, add an L to the end of the part number. with Gauge without Gauge R73G-2RG R73G-3RG R73G-4RG $ R73G-2R R73G-3R R73G-4R $ PSI range inlet pressure: 300 PSI at ambient temperature (70 F) in-line or modular installation relieving type two full flow NPT gauge ports models supplied with GC230 gauge For 0-60 PSI range, add an L to the end of the part number. Port with Gauge without Gauge R74G-3RG R74G-4RG R74G-6RG $ R74G-3R R74G-4R R74G-6R $ PSI range inlet pressure: 300 PSI at ambient temperature (70 F) in-line or modular installation Port ¾" 1¼" 1½" relieving type two full flow NPT gauge ports models supplied with GC230 gauge with Gauge without Gauge R17-600RG R17-800RG R17-A00RG R17-B00RG $ R17-600R R17-800R R17-A00R R17-B00R $ (8) 1.2 (32) 4.88 (124) 7.26 (184) -12 PSI range inlet pressure: 40 PSI at ambient temperature (70 F) relieving type two full flow NPT gauge ports models supplied with GC230 gauge 2" Port with Gauge without Gauge 2" 00 R18-C0RG $ R18-C0R $ See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 224

125 Miniature Non-Repairable General Purpose Regulators 1.97 (0) 0.33 (8) 1.6 (42) Dia (41) -12 PSI range lightweight construction left to right flow wrench flats for easy installation relieving piston design allows reduction of downstream pressure when the system is dead-ended model supplied with a GC6 gauge Compact Port with Gauge without Gauge 13 R46-0RG $6.40 R46-0R $39.70 Norgren Series 1 General Regulators Floating valve pin provides positive seating and dependability. Large diaphragm provides quick response to flow demands and line pressure changes. Balanced valve reduces inlet pressure variations on outlet pressure. -12 PSI range inlet pressure: 400 PSI at ambient temperature (70 F) T-handle adjustment models supplied with GC6 gauge Port with Gauge R11-013RG R11-037RG R11-061RG $ Norgren Series 1 Manifold Regulators Manifold up to six regulators on a single air supply. Design allows in-line installation with hex nipple or modular installation with 72 Series accessories (see page 243). -10 PSI range models supplied with GC6 gauge inlet pressure: 300 PSI at ambient temperature (70 F) Port with Gauge without Gauge R72M-2RG R72M-3RG $ R72M-2R R72M-3R $ Norgren Series 1 Cylinder Gas Regulator UL listed for service with Carbon Dioxide, water, pumped air, Nitrogen, Argon, Helium, Krypton, Neon and Xenon. Not to be used with flammable gases. -12 PSI range inlet pressure: 3000 PSI at ambient temperature (70 F) relieving type two ports for high pressure and two ports for service without Gauge Port R83-0R $10. See pages for regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 22

126 Norgren Series 1 Miniature Water Regulator Designed for use with deionized water and potable water systems. Plastic and metals in contact with fluid are approved by the National Sanitation Foundation (NSF) or the Food and Drug Administration (FDA) for use in potable water systems. lastomers are food grade. non-relieving type models supplied with GC6 gauge with Gauge Port GPM 1.7 R91-221RG $83.1 Norgren Series 1 Water Regulators Used in water systems to reduce and maintain pressure at a nearly constant level despite changes in the inlet pressure and changes in downstream flow requirements. Brass body and aluminum bonnet. -12 PSI range inlet pressure: 400 PSI at ambient temperature (70 F) T-handle adjustment non-relieving type gauge port is full-flow and can be used as an outlet port models supplied with GC230 gauge Port GPM with Gauge R43-1RG R43-301RG R43-406RG $ Norgren Series 1 Water Pressure Regulators Balanced valve minimizes effects of the inlet pressure variations on outlet pressure. Body, valve and bottom plug are. Bonnet is aluminum and. lastomers are nitrile. inlet pressure: 400 PSI T-handle adjustment non-relieving type operating temperature: water service: 3 to 0 F (2 to 93 C) air service: -30 to 0 F (-34 to 93 C) Port GPM without Gauge $ See pages for regulator accessories. ratings at 0 PSIG inlet pressure. 226

127 Norgren Series 1 Filter / Regulators -10 PSI range in-line or modular installation 40 micron element 2 oz. reservoir quick-release bayonet bowl prismatic lens liquid level indicator particle removal per ISO 873-1, Class and Class 3 Port Port models supplied with GC6 gauge inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) with Transparent Bowl Semi-Automatic Drain Manual Drain B72G-2AG $178.0 B72G-2MG $127.0 B72G-3AG B72G-3MG with Metal Bowl and Sight Glass Semi-Automatic Drain Manual Drain 80 B72G-2AG-MB $192.0 B72G-2MG-MB $ B72G-3AG-MB B72G-3MG-MB PSI range in-line or modular installation 40 micron element 2 oz. reservoir quick-release bayonet bowl prismatic lens liquid level indicator particle removal per ISO 873-1, Class and Class 3 with Transparent Bowl Port Automatic Drain Manual Drain B73G-2AG B73G-3AG B73G-4AG $... B73G-2MG B73G-3MG B73G-4MG $ Port models supplied with GC230 gauge inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) with Metal Bowl and Sight Glass Automatic Drain Manual Drain 78 B73G-2AG-MB $28.60 B73G-2MG-MB $ B73G-3AG-MB B73G-3MG-MB B73G-4AG-MB B73G-4MG-MB 19.2 with transparent bowl with transparent bowl with metal bowl -12 PSI range 40 micron element 7 oz. reservoir relieving type models supplied with GC230 gauge Port Port with Transparent Bowl and Guard Automatic Drain Manual Drain 163 B74G-3AG $29.0 B74G-3MG $ B74G-4AG 29.0 B74G-4MG B74G-6AG 29.0 B74G-6MG with Metal Bowl and Sight Glass Automatic Drain Manual Drain B74G-3AG-MB B74G-4AG-MB B74G-6AG-MB $ B74G-3MG-MB B74G-4MG-MB B74G-6MG-MB $ with guard See page 242 for filter/regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. with metal bowl 227

128 Norgren Series 1 Micro-Fog Lubricators Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of lubrication, cylinders and multiple or single tools. flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fall back into the reservoir. The micro-fog lubricator delivers % of the oil drops visible through the transparent sight-feed dome. Micro-fog lubricators cannot be filled under pressure. 2 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Port 1 1 Transparent Bowl Metal Bowl L72M-2 L72M-3 $ L72M-2MB L72M-3MB $ with transparent bowl 4 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Port Transparent Bowl Metal Bowl L73M-2 L73M-3 L73M-4 $ L73M-2MB L73M-3MB L73M-4MB $ with metal bowl See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 228

129 Norgren Series 1 Micro-Fog Lubricators Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of lubrication, cylinders and multiple or single tools. flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fall back into the reservoir. The micro-fog lubricator delivers % of the oil drops visible through the transparent sight-feed dome. Micro-fog lubricators cannot be filled under pressure. 7 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Port Transparent Bowl Metal Bowl L74M-3 L74M-4 L74M-6 $ L74M-3MB L74M-4MB L74M-6MB $ metal bowl 1 qt. reservoir oil level sight gauge one turn threaded bowl attachment permits easy maintenance inlet pressure: PSI at ambient temperature (70 F) Port ¾" 1¼" 1½" Metal Bowl with Sight Glass L17-600A L17-800A L17-A00A L17-B00A $ metal bowl 2 gallon reservoir oil flow can be positively set reservoir is ASM construction inlet pressure: PSI at ambient temperature (70 F) 2" General Purpose (Oil-Fog Only) Metal Bowl with Sight Glass Port 2" $ See pages for lubricator accessories. See page 137 for air tool lubricant. metal bowl FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 229

130 Norgren Series 1 Micro-Fog Lubricator with Pyrex Sight Feed Dome Designed for use with alcohol or other anti-freeze agents when units are installed in cold temperature environments. Pyrex sight feed dome with aluminum case and fluorocarbon O-Rings and seals; Pyrex sight glass on bowls and metal petcock drain. Micro-fog lubricators, identified by a red adjusting screw, are used for applications containing one or more points of lubrication, cylinders and multiple or single tools. flow through the lubricator lifts oil from the reservoir to the sight-feed dome. Oil is dropped into the fog generator and atomized into a fine mist. Lightweight particles are delivered downstream for lubrication. Heavier particles fall back into the reservoir. The micro-fog lubricator delivers % of the oil drops visible through the transparent sight-feed dome. Micro-fog lubricators cannot be filled under pressure. metal bowl 2 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist Port 1 1 recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F inlet pressure: PSI maximum temperature: 17 F Metal Bowl with Sight Glass L72M-2MBPX $242. L72M-3MBPX metal bowl metal bowl metal bowl 4 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist Port oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist Port qt. reservoir oil level sight gauge particle removal per ISO 873-1, class and class 3 Port ¾" 1¼" 1½" recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F inlet pressure: PSI maximum temperature: 17 F Metal Bowl with Sight Glass L73M-2MBPX $ L73M-3MBPX L73M-4MBPX recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F inlet pressure: PSI maximum temperature: 17 F Metal Bowl with Sight Glass L74M-3MBPX $ L74M-4MBPX L74M-6MBPX one turn threaded bowl attachment permits easy maintenance inlet pressure: PSI Metal Bowl with Sight Glass L17-600APX $ L17-800APX L17-A00APX L17-B00APX See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 230

131 Norgren Series 1 Oil-Fog Lubricators Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor, and are located as near the device as possible. All the oil visible dropping through the transparent sight-feed dome goes to the airstream. L72C, L73C and L74C OIL-FOG lubricators can be filled under pressure. 2 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist can be filled under pressure recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Port 1 1 Transparent Bowl Metal Bowl L72C-2 L72C-3 $ L72C-2MB L72C-3MB $ with transparent bowl 4 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist can be filled under pressure recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Port Transparent Bowl Metal Bowl L73C-2 L73C-3 L73C-4 $ L73C-2MB L73C-3MB L73C-4MB $ with metal bowl See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 231

132 Norgren Series 1 Oil-Fog Lubricators Oil-fog lubricators, identified by a green adjusting screw, are used for lubricating a single air tool or air motor, and are located as near the device as possible. All the oil visible dropping through the transparent sight-feed dome goes to the airstream. L72C, L73C and L74C OIL-FOG lubricators can be filled under pressure. 7 oz. reservoir in-line or modular installation quick release bayonet bowl micro-fog design delivers aerosol mist can be filled under pressure Port recommended lubricants: misting type oil rated 0 to 0 SSU (ISO Grade 7 to 46) at 0 F maximum operating conditions: transparent bowl: 10 PSI and 12 F metal bowl: PSI and 17 F Transparent Bowl Metal Bowl L74C-3 L74C-4 L74C-6 $ L74C-3MB L74C-4MB L74C-6MB $ metal bowl 1 qt. reservoir oil level sight gauge cannot be filled under pressure one turn threaded bowl attachment permits easy maintenance inlet pressure: PSI at ambient temperature (70 F) metal bowl Port ¾" 1¼" 1½" Metal Bowl with Sight Glass L17-600D L17-800D L17-A00D L17-B00D $ gallon reservoir oil flow can be positively set cannot be filled under pressure reservoir is ASM construction inlet pressure: PSI at ambient temperature (70 F) 2" General Purpose (Oil-Fog Only) Metal Bowl with Sight Glass Port 2" $ metal bowl See pages for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 232

133 Norgren Series 1 Combination Units These units are intended for use in industrial compressed air systems only. Not for use with fluids. They must not be used where pressure or temperature may exceed maximum rated operating conditions. Combination Units are supplied with micro-fog lubricators. The polycarbonated plastic bowls used on these units can be damaged and possibly burst if exposed to such substances as certain solvents, strong alkalies, compressor oils that contain ester-based additives or synthetic oils. Fumes of these substances in contact with the polycarbonate bowl, externally or internally, can also result in damage. Use metal bowl in applications where a plastic bowl might be exposed to substances that are incompatible with polycarbonates. Clean with warm water only. -12 PSI range 1 oz. reservoir Miniature Combination Units with Transparent Bowl Port Automatic Drain Manual Drain P1A-0A P1A-0A inlet pressure 10 PSI maximum at ambient temperature (70 F) models supplied with a GC6 gauge $ P1A-0M P1A-0M $ transparent bowls -10 PSI range 2 oz. reservoir inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) Port Combination Unit with Transparent Bowl Automatic Drain Manual Drain A 72-3A models supplied with a GC6 gauge connected modularly Includes 2 clamps and wall mounting brackets # , 2 clamps # and 2 NPT pipe adapters. See modular components on pages 237, 239 and 241 for other options. $ M 72-3M $ Port Combination Unit with Metal Bowl Automatic Drain Manual Drain A-MB 72-3A-MB $ M-MB 72-3M-MB $ transparent bowls -10 PSI range 2 oz. reservoir inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) Port Port Combination Unit with Transparent Bowl Automatic Drain Manual Drain A 73-3A 73-4A $ FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 73-2M 73-3M 73-4M $ Combination Unit with Metal Bowl Automatic Drain Manual Drain A-MB 73-3A-MB 73-4A-MB models supplied with a G230 gauge connected modularly Includes 2 clamps and wall mounting brackets # , 2 clamps # and 2 NPT pipe adapters. See modular components on pages 237, 239 and 241 for other options. $ M-MB 73-3M-MB 73-4M-MB $ metal bowls 233

134 with metal bowls Norgren Series 1 Combination Units -10 PSI range 7 oz. reservoir inlet pressure: transparent bowl: 10 PSI at ambient temperature (70 F) metal bowl: PSI at ambient temperature (70 F) Combination Unit with Transparent Bowl and Guard Port Automatic Drain Manual Drain 74-3A 74-4A 74-6A $ M 74-4M 74-6M $ Combination Unit with Metal Bowl and Sight Glass Port Automatic Drain Manual Drain A-MB 74-4A-MB 74-6A-MB models supplied with a GC230 gauge connected modularly Includes 2 clamps and wall mounting brackets # , 2 clamps # and 2 NPT pipe adapters. See modular components on pages 237, 239 and 241 for other options. $ M-MB 74-4M-MB 74-6M-MB $ with metal bowls -12 PSI range 1 qt. reservoir Combination Unit with Metal Bowl and Sight Glass Port Automatic Drain Manual Drain P8A-660A P8A-860A inlet pressure: PSI at ambient temperature (70 F) $ P8A-660M P8A-860M $ Desiccant Compressed Dryers Compressed air dryers help to eliminate condensation at the point of use. A replaceable element filters outlet air to help prevent desiccant dust migration downstream. Silica gel desiccant changes color from blue to pink when desiccant replacement is needed. Desiccant can be dried and reused by heating to 27 F, or replaced. Moisture indicator on top of body. An after filter should be placed downstream from the desiccant dryer to ensure solid contaminants such as desiccant dust do not migrate downstream (429)*.06 (26) 2.40 (61) Automatic Drain 2.40 (61) * Minimum clearance required to remove bowl. Manual Drain 2.38 (60).4 (26) 7 oz. reservoir: uses 1 gel packet nominal air drying capacity 70 cubic feet at 0 PSI and 77 F maximum inlet pressure: 10 PSI maximum temperature: 17 F 1 qt. reservoir: uses gel packets nominal air drying capacity 6000 cubic feet at 0 PSI and 77 F maximum inlet pressure: PSI maximum temperature: 17 F in-line or modular installation 1.2 lb. bowl capacity quick release bayonet bowl Reservoir 7 oz. 1 qt. Metal Bowl with Guard W74D-2A-MB7 W74D-2A-MB32 $ oz. reservoir 1 qt. reservoir See page 236 for silica gel refills. FRL's are designed for air service only, unless otherwise indicated. ratings at 0 PSIG inlet pressure. 234

135 Norgren Series 1 Drip Leg Automatic Drain Used in compressed air systems to automatically expel liquids from piping systems. Installed at low points in piping and at end of pipe network, where water is likely to accumulate. metal bowl drain is ported to NPT inlet for metal bowl: PSIG at ambient temperature (70 F) Port $2.0 Norgren Series 1 Three-Way Shut-Off Valves Shut-off valves, typically attached to the inlet end of a combination unit, are manually operated, slide type valves that open and close with a short movement of the slide. The valve slide can be locked in the closed position with a customer supplied padlock. The standard valve is a 3-way valve that exhausts downstream air in the closed position. recommended pressure is PSI at ambient temperature (70 F) conforms to OSHA lockout regulation for use with 73 Series filters, regulators and lubricators on pages T73-2 T73-3 T73-4 $ Brass Hex Nipples x x x x x x BCN12 BCN2 BCN37 BCN0 BCN7 BCN0 $ Opt Qty Carbon Steel Close Nipples Stainless close nipples are available on pages 273 and 83. Brass close nipples are available on page 311. x 1- x 1-1- x 1-2" x 2" CN0 CN12 CN10 CN0 $ Opt Qty Do not use pipe nipples as hose inserts. 23

136 micron element Norgren Series 1 Filter Accessories lements Used On Description F07 F08 F17 F18 F72 F73 F74 F74C F74H F74V micron micron 40 micron micron 2 micron 40 micron micron 2 micron 0 micron micron 40 micron micron 40 micron micron 40 micron oil removal filter oil removal filter vapor removal filter $ Gel Refills Used On Description W74D silica gel refills,.2 lb. ea $192.6 transparent bowl and guard 432-1R Used On Description F07 F08 F17 F72 F73 F74 Bowls and Bowl Guards polycarbonate bowl with auto drain polycarbonate bowl with manual drain transparent bowl with manual drain transparent bowl with auto drain metal bowl with drain transparent bowl with manual drain transparent bowl with semi-automatic drain transparent bowl with manual drain, ¼ turn transparent bowl with auto drain transparent bowl and guard transparent bowl assy with manual drain, ¼ turn bowl guard only RF RF 442-0RF 442-1RF 432-1R 432-2R $ Auto and Manual Drains auto drain Used On Description F08,F17 F72 F72, F73 F74 F72, F73, F74 auto drain manual drain assembly semi-automatic drain auto drain auto drain manual drain RK R $ Lens Kits liquid level lens kit Used On Description F72 F73 F74 liquid level lens kit liquid level lens kit Pyrex sight glass kit $

137 Norgren Series 1 Filter Accessories Indicator Conversion Kit allows addition of service life indicator in the field for general purpose and oil removal filters Used On Description F72, F73, service life indicator $62.30 F74 Used On Description F07 F08 F17 Wall Mounting Brackets For use instead of quick-clamps and pipe adapters to secure to a wall, machine panel or other flat surface Use close nipples to connect combination unit and then place in bracket. Used On Description F72 F73 F74 Mounting Brackets mounting bracket only mounting bracket only mounting bracket kit for ¾" and ported units mounting bracket kit for 1¼" and 1½" ported units wall mounting bracket for all F72 series wall mounting bracket for all F73 series wall mounting bracket for all F74 series Quick Clamps and Brackets Quick-clamp provides modular installation capability flanges on the products slide into V grooves in clamp face-sealing O-rings provide a positive seal when clamp is closed and screw tightened Bracket for quick-clamp provides secure mounting to a wall, machine panel or other flat surface $ Used On Description F72 F73, F74 quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 3/16" screws) quick-clamp and bracket assembly quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 7/32" screws) quick-clamp and bracket assembly $ Blocks installs with quick-clamps provides additional outlets and manifolding capability $ service life indicator quick-clamp mounting bracket bracket quick-clamp with bracket Used On Description F72 F73, F74 porting block, three PTF outlets manifold block, three PTF outlets porting block, three PTF outlets manifold block, three PTF outlets $ Adapters installs with quick-clamps provides PTF connections to system piping sold individually porting block manifold block Used On Description F72 PTF connections PTF connections $ F73, F74 PTF connections PTF connections PTF connections PTF connections pipe adapters 237

138 Norgren Series 1 Filter Accessories Used On Description F08 F17 F18 F72 F73 F74 Used On Description R72 R73 R74 O-rings, seals, and gaskets O-rings, seals, and gaskets O-rings, seals, and gaskets O-rings, seals, and gaskets O-rings, seals, and gaskets O-rings, seals, and gaskets -60 PSI -10 PSI -60 PSI -10 PSI -60 PSI -10 PSI Service Kits Norgren Series 1 Regulator Accessories Replacement Springs $ $ tamper resistant cover Tamper Resistant Cover and Seal Wire helps prevent unauthorized adjustment to the pressure setting cover can be locked in place with up to four padlocks installs on adjusting knob Used On Description R72 R73 R74 tamper proof kit tamper proof kit tamper proof kit $ panel nut Panel Nuts Used On Description R07 R08 R17 R22 R72 R73 R74 plastic panel nut plastic panel nut metal panel nut stainless panel nut plastic panel nut zinc panel nut zinc panel nut $ Repair Kits Used On Description R06 R07 R08 R11 R17 R18 R72 R73 R74 diaphragm, relieving diaphragm, relieving diaphragm, relieving diaphragm, relieving diaphragm, relieving seal kit only diaphragm, relieving diaphragm, relieving diaphragm, relieving $

139 Norgren Series 1 Regulator Accessories Wall Mounting Brackets For use instead of quick-clamps and pipe adapters to secure to a wall, machine panel or other flat surface Use close nipples to connect combination unit and then place in bracket. Used On Description R72 R73 R74 Mounting Brackets Used On Description R07 R08 R17 R22 mounting bracket with plastic panel nut mounting bracket with plastic panel nut mounting bracket with plastic panel nut mounting bracket mounting bracket with panel nut wall mounting bracket for all R72 series wall mounting bracket for all R73 series wall mounting bracket for all R74 series $ $ Quick Clamps and Brackets Quick-clamp provides modular installation capability flanges on the products slide into V grooves in clamp face-sealing O-rings provide a positive seal when clamp is closed and screw tightened Bracket for quick-clamp provides secure mounting to a wall, machine panel or other flat surface Used On Description R72 R73, R74 quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 3/16" screws) quick-clamp and bracket assembly quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 7/32" screws) quick-clamp and bracket assembly $ quick-clamp bracket quick-clamp with bracket Blocks installs with quick-clamps provides additional outlets and manifolding capability Used On Description R72 porting block, three PTF outlets manifold block, three PTF outlets $ R73, R74 porting block, three PTF outlets manifold block, three PTF outlets porting block manifold block Adapters installs with quick-clamps provides PTF connections to system piping sold individually Used On Description R72 PTF connections PTF connections $ R73, R74 PTF connections PTF connections PTF connections PTF connections pipe adapters see page 23 for replacement gauges 239

140 Norgren Series 1 Lubricator Accessories Bowls and Bowl Guards Used On Description L07 L08 L72 L73 L74 polycarbonate bowl with manual drain transparent bowl with manual drain metal bowl with Pyrex liquid level indicator and ¼ turn manual drain transparent bowl with manual drain metal bowl with Pyrex liquid level indicator and ¼ turn manual drain transparent bowl with manual drain bowl guard only Auto and Manual Drain RF 442-0RL R 432-0R $ seal wire Used On Description L08, L17 manual drain assembly $13.90 Seal Wire provides tamper resistant protection of the lubricator drip rate setting Used On Description L73, L74 metal $13.00 Domes, Caps and Plugs Used On Description L08 L17, L74 L72 L73, L74 L72, L74, L73 L72, L74 L74 quick fill cap quick fill cap acetal fill plug aluminum fill plug sight feed dome (micro-fogging design) sight feed dome (oil-fogging design) Pyrex sight feed dome liquid level indicator repair kit $ Used On Description L17 L72 L73 L74 O-rings, seals, and gaskets O-rings, seals, and gaskets Viton seal buna seal O-rings, seals, and gaskets O-rings, seals, and gaskets Viton seal Seal Kits $ mounting bracket Used On Description L07 L08 L17 Mounting Brackets mounting bracket only mounting bracket only mounting bracket kit for ¾" and ported units mounting bracket kit for 1¼" and 1½" ported units $

141 Norgren Series 1 Lubricator Accessories Wall Mounting Brackets For use instead of quick-clamps and pipe adapters to secure to a wall, machine panel or other flat surface Use close nipples to connect combination unit and then place in bracket. Used On Description L72 L73 L74 wall mounting bracket for all L72 series wall mounting bracket for all L73 series wall mounting bracket for L74 series wall mounting bracket for L74 series with 1 quart reservoir $ Quick Clamps and Brackets Quick-clamp provides modular installation capability flanges on the products slide into V grooves in clamp face-sealing O-rings provide a positive seal when clamp is closed and screw tightened Bracket for quick-clamp provides secure mounting to a wall, machine panel or other flat surface Used On Description L72 L73, L74 quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 3/16" screws) quick-clamp and bracket assembly quick-clamp quick-clamp service kit (2 O-rings) wall bracket for quick-clamp (uses 7/32" screws) quick-clamp and bracket assembly $ quick-clamp bracket quick-clamp with bracket Blocks installs with quick-clamps provides additional outlets and manifolding capability Used On Description L72 porting block, three PTF outlets manifold block, three PTF outlets $ L73, L74 porting block, three PTF outlets manifold block, three PTF outlets porting block manifold block Adapters installs with quick-clamps provides PTF connections to system piping sold individually Used On Description L72 PTF connections PTF connections $ L73, L74 PTF connections PTF connections PTF connections PTF connections pipe adapters 241

142 Norgren Series 1 Filter/Regulator Accessories 432-1R Used On Description B74 Bowls and Bowl Guards transparent bowl with manual drain transparent bowl with auto drain bowl guard only 432-1R 432-2R $ Tamper Resistant Cover and Seal Wire helps prevent unauthorized adjustment to the pressure setting cover can be locked in place with up to four padlocks installs on adjusting knob tamper resistant cover Used On Description B72 B73 B74 tamper proof kit tamper proof kit tamper proof kit $ Panel Nuts panel nut Used On Description B08 B72 B73 B74 plastic panel nut plastic panel nut zinc panel nut zinc panel nut $ Mounting Brackets Used On Description B07 B08 mounting bracket mounting bracket kit $ see page 23 for replacement gauges 242

143 Watts Filters 40 micron polypropylene element oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Compact Polycarbonate Bowl with Plastic Bowl Guard Automatic Drain Manual Drain 7 F602-02BJR F602-03BJR $ F602-02BJ F602-03BJ $ micron polypropylene element 8 oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Standard Polycarbonate Bowl with Plastic Bowl Guard Automatic Drain Manual Drain 1 F602-04BJR $211. F602-04BJ $ micron polypropylene element 16 oz. bowl zinc body automatic drain operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 17 PSIG (12 bar) maximum manual drain operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass Automatic Drain Manual Drain 340 F602-06WJR F602-08WJR $ F602-06WJ F602-08WJ $ See page 248 for filter accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 243

144 Watts Filters 40 micron polypropylene element 16 oz. bowl zinc body automatic drain operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 17 PSIG (12 bar) maximum manual drain operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass Automatic Drain Manual Drain 1½" 380 F602-12WJR $417. F602-12WJ $ micron polypropylene element 26 oz. bowl aluminum body automatic drain operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 17 PSIG (12 bar) maximum manual drain operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass Automatic Drain Manual Drain 2" 112 F602-16WJR $ F602-16WJ $ See page 248 for filter accessories. Watts Filter / Regulator 2-12 PSIG (.1-8. bar) range 40 micron filter 4 oz. bowl zinc body relieving diaphragm operated spring adjustment mechanism glass-filled acetal plastic spring cage tamper resistant, snap lock, removable knobs temperature range: 40 F (4.4 C) to 1 F (48.9 C) use a GC230 gauge (not supplied) Zinc Bowl with Sight Glass Automatic Drain Manual Drain B11-02WJCR B11-03WJCR B11-04WJCR $ B11-02WJC B11-03WJC B11-04WJC $ See page for filter/regulator accessories. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 244

145 1.6 (40) 2.6 (6) 3.06 (78).0 (13) 2-12 PSIG (.1-8. bar) range body relieving diaphragm operated non-rising adjusting knob Watts Regulators supply pressure: 300 PSIG (.4 bar) maximum temperature range: 40 F (4.4 C) to 1 F (48.9 C) gauge port Mini With Gauge Without Gauge R364-02CG $78.00 R364-02C $7.30 NW for 11!! 2-12 PSIG (.1-8. bar) t-handle design range supply pressure: 300 PSIG (.4 bar) zinc body maximum relieving temperature range: 40 F (4.4 C) to diaphragm operated 1 F (48.9 C) spring adjustment mechanism uses a GC230 gauge Compact With Gauge Without Gauge R11-02CG R11-03CG R11-04CG $ R11-02C R11-03C R11-04C $ PSIG (.1-8. bar) bottom plug range aluminum spring cage zinc body supply pressure: 300 PSIG (.4 bar) relieving maximum diaphragm operated temperature range: 40 F (4.4 C) to spring adjustment mechanism 1 F (48.9 C) t-handle design uses a GC230 gauge ¾" 1½" Standard With Gauge Without Gauge R119-02CG R119-03CG R119-04CG R119-06CG R119-08CG R119-12CG $ $ FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. R119-02C R119-03C R119-04C R119-06C R119-08C R119-12C $ PSIG (.1-8. bar) acetal bottom plug range aluminum spring cage zinc body supply pressure: 300 PSIG (.4 bar) relieving maximum diaphragm operated temperature range: 40 F (4.4 C) to spring adjustment mechanism 1 F (48.9 C) t-handle design uses a GC230 gauge Standard With Gauge Without Gauge See page 249 for regulator accessories. $

146 Watts Lubricators general purpose high performance over a very wide flow range lubricator is fillable while under pressure rate of lubrication is automatically proportioned to air flow eliminating readjustment oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Compact Polycarbonate Bowl with Plastic Bowl Guard L606-02B $ L606-03B oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Standard Polycarbonate Bowl with Plastic Bowl Guard 12 L606-04B $ oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum 27 3 Standard Zinc Bowl with Sight Glass L606-06W $ L606-08W oz. bowl zinc body operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass 1½" 0 L606-12W $ See pages 249 for lubricator accessories. See page 137 for air tool lubricant. FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 246

147 Watts Combination Units oz. bowl 40 micron polypropylene element zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Compact Polycarbonate Bowl with Plastic Bowl Guard Automatic Drain Manual Drain C11-02A C11-03A $ C11-02M C11-03M $ oz. bowl 40 micron polypropylene element zinc body operating conditions: temperature range: 40 F (4.4 C) to 1 F (48.9 C) pressure: 10 PSIG (.2 bar) maximum Standard Polycarbonate Bowl with Plastic Bowl Guard Automatic Drain Manual Drain 12 C119-04A $84.61 C119-04M $ oz. bowl 40 micron polypropylene element zinc body operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass Automatic Drain Manual Drain 27 3 C119-06AMB C119-08AMB $ C119-06MMB C119-08MMB $ oz. bowl 40 micron polypropylene element zinc body operating conditions: temperature range: 40 F (4.4 C) to 10 F (6.6 C) pressure: PSIG (17 bar) maximum Standard Zinc Bowl with Sight Glass Automatic Drain Manual Drain 1½" 0 C119-12AMB $ C119-12MMB $84.3 FRL's are designed for air service only, unless otherwise indicated. ratings at 10 PSIG inlet pressure. 247

148 Watts Filter Accessories 40 micron filter K602G lements Used On Description F602-02, F F602-02, F F F F602-06, F602-08, F F602-06, F602-08, F F micron 40 micron micron 40 micron micron 40 micron 40 micron K602VY K602Y K602VA K602A K602VB K602B K602G $ polycarbonate bowl BK602Y Bowls and Sight Glass Repair Kit Used On Description F602-02, F F polycarbonate bowl polycarbonate bowl with plastic bowl guard BK602Y BK602A $ internal auto drain SA602MD Auto and Manual Drains Used On Description F602 F602 F602 internal auto drain internal auto drain repair kit manual drain SA602MD RK602MD SA600Y7-1 $ mounting bracket SA0AW7 Accessories Used On Description F602 compact F602 standard F602 ¾" F602 mounting bracket mounting bracket mounting bracket (2 required) mounting bracket (2 required) SAF SAF SA0AW7 SA0CW7 $

149 Watts Regulator Accessories Repair Kits Used On Description R11 R119-02, R R R119-06, R R R relieving diaphragm, valve assembly relieving diaphragm, valve assembly relieving diaphragm, valve assembly relieving diaphragm, valve assembly relieving diaphragm, valve assembly relieving diaphragm, valve assembly RKRY RK119Y RK119A RK119B RK119D RKR164Y $ repair kit RK119B Accessories Used On Description R11 R119-02, R R R R119-08, R R mounting bracket with panel nut mounting bracket mounting bracket mounting bracket mounting bracket with panel nut SARY7 SA1Y7 18A7 18B7 SA161X7 $ mounting bracket SARY7 mounting bracket SA1Y7 Watts Lubricator Accessories Bowls and Sight Glass Repair Kit Used On Description L L L L606-06, L606-08, L polycarbonate bowl with plastic bowl guard polycarbonate bowl with plastic bowl guard sight glass BK606Y BK606A RKB60WB $ polycarbonate bowl BK602Y Accessories Used On Description L606-02, L L L L mounting bracket mounting bracket mounting bracket (2 required) mounting bracket (2 required) SAF SAF SA0AW7 SA0CW7 $ mounting bracket SA0AW7 249

150 Bi-Metal Thermometers case: sturdy, corrosion resistant series 304 stainless case and bezel crystal: optically clear, strong glass, gasketed to maintain weather-tight integrity is standard stem: 304 series stainless, welded at tip and case connector to prevent leakage, ¼" (6.3 mm) diameter is standard hermetic seal: hermetically sealed per ASM B40.3 external reset: slotted-hex adjustment head offers screwdriver or wrench use to field calibrate the thermometer bi-metal element: an extremely responsive temperature sensing helix which has been carefully sized and tested, heat treated and aged to relieve inherent stresses and insure continued accuracy dampening: bi-metal helix is coated with a viscous silicone to minimize pointer oscillation and to improve temperature transmission immersion: for accurate temperature readings, immerse stem a minimum of 2" (0 mm) in agitated liquids or 4" (0 mm) in moving air or gas over range: temporary over or under range of 0% of scale up to 260 C or 00 F will not affect the instrument accuracy accuracy: guaranteed to be accurate to within 1% of full scale (Grade A per ASM B40.3) (The American Society of Mechanical ngineers issued a new standard for Bi-Metal Thermometers in 1990 referred to as ASM B40.3.) Standard Connection is ½" male NPT Stem Length Range 2½" 2½" 4" 4" 6" 6" 9" 9" Model 30 Back Connected 3" Thermometers 0- F/--1 C 0-00 F/-260 C 0- F/--1 C 0-00 F/-260 C 0- F/--1 C 0-00 F/-260 C 0- F/--1 C 0-00 F/-260 C $ Stem Length Range 2½" 4" Model 31 Bottom Connected 90 Angle 3" Thermometers 0- F/--1 C 0-00 F/-260 C $ Stem Length Range 2½" 4" Model 0 Back Connected " Thermometers 0-00 F/-260 C 0- F/--1 C $ Stem Length Range 2½" 4" 4" Model 2 Adjustable Angle " Thermometers 0- F/--1 C 0- F/--1 C 0-00 F/-260 C $

151 case: 304 stainless case, hermetically sealed crystal: extra heavy polycarbonate crystal stem: 304 series stainless external reset: hex nut on back of case bi-metal element: responsive actuation by bi-metal helix dampening: bi-metal helix is coated with a viscous silicone to minimize pointer oscillation scale length: approximately 2- (4mm) accuracy: 1% carrying case: polyethylene case with clip Bi-Metal Pocket Thermometers range 0-2 F 0-0 F PT2 PT0 $ ¾" male NPT process connection 'A' dimension 1-/8" 'B' dimension 2-4" 6" 9" Magnetic Surface Mount Thermometers case:, 2" x ½" dial: polished aluminum bi-metal element: responsive actuation by bi-metal helix accuracy: ± 2% 2" Face range 0- F 0-00 F MT MT Stainless Steel Threaded Thermowells 7TH2R01SS 7TH2R02SS 7TH2R04SS 7TH2R07SS $ $ º Steam Gauge Siphons In steam service, the siphon will prevent hot steam from entering a pressure gauge, diaphragm seal or transmitter. Recommended for applications involving temperatures above 0 F (37 C). Also use siphons whenever condensing hot vapors (not just steam) are present. A B red pipe complies with ASTM B-43 withstands pressure of 0 PSI at 406 F Red Brass male IPS $30.4 ¼" NPT schedule 40, welded suitable for 17 PSI at 340 F Steel male NPT S $

152 Dixon Gauges All of the gauges supplied by Dixon are designed for long, reliable service under rugged conditions. Typical applications include those on pumps, hydraulic and pneumatic systems, compressors, machine tools and many other installations where it is necessary to have a gauge with a non-corrosive movement. The gauges available include standard dry and liquid-filled pressure gauges, compound pressure gauges, vacuum gauges and welding gauges. Materials available include, stainless and plastic. Fig. Inter. - Figure Interval. Increments between PSI numbers on gauge face. Grad. Inter. - Graduation Interval. Fractional increments between PSI numbers on gauge face. ASM B40.1 Grade B (± 3/2/3% accuracy) polished case polished ring Brass Standard Dry Gauges copper alloy bourdon tube dual PSI / kpa scale dial ambient temperature range of -40 F to 140 F 2½" face ¼" lower mount PSI Fig. Inter. Grad. Inter GBR1 GBR30 GBR60 GBR0 GBR160 GBR0 GBR300 GBR400 GBR600 GBR00 GBR100 GBR00 GBR3000 GBR000 $ Process Gauges Specifically designed for process, chemical and petroleum industries, these process gauges are engineered to deliver years of accurate service while withstanding vibration, corrosive media and corrosive atmosphere. ambient process temperature: dry -40 F to 0 F (-40 C to 93 C) case: black impact resistant thermoplastic, with safety blowout back, solid front, integral back flange (dry) ring: ethylene propylene wetted parts: 316L stainless window: polycarbonate dial: white aluminum pointer: black aluminum accuracy: ± 0.% ANSI/ASM Grade 2A scale: single scale PSI only 4½" face ½" lower mount PSI Fig. Inter. 0 0 Grad. Inter L Stainless Steel PGS30 PGS60 PGS0 PGS160 PGS0 PGS300 PGS600 PGS00 $

153 ABS Standard Dry Gauges ASM B40.1, Grade B (± 3-2-3% accuracy) ABS plastic case c-shaped bronze safety bourdon tube (600 PSI and lower) helical wound bronze safety bourdon tube (00 PSI and higher) polycarbonate crystal black aluminum pointer PowerFlex movement with polyester segment, designed to resist the effects of shock, vibration and pulsation. ambient temperature range of -40 F to 10 F PSI Fig. Inter. 1½" face center back mount Minor Grad. Center Back Mount GC60 GC6 GC61 GC6 GC62 $ " face center back mount PSI Fig. Inter. Minor Grad GC0 GC21 GC2 GC22 GC230 GC23 GC240 $ GC230 2" face lower mount Lower Mount PSI Fig. Inter. Minor Grad GL0 GL11 GL1 GL12 GL130 GL13 GL140 $ PSI Fig. Inter ½" face lower mount Minor Grad GL300 GL3 GL32 GL330 GL33 GL340 GL34 GL347 GL30 GL3 GL360 GL36 GL370 GL37 $ PSI Fig. Inter Minor Grad GL140 3½" face lower mount GS1-4 GS30-4 GS60-4 GS0-4 GS160-4 GS0-4 GS300-4 GS400-4 GS600-4 GS00-4 $

154 accuracy class: ± 1% of span material of wetted parts: copper alloy window: acrylic, snap in Contractor Pressure Gauges FlutterGuard Dry Gauges dial: aluminum, white pointer: aluminum, black, adjustable mounting flange/bracket: rear flange, stainless stainless case 4½" face ¼" lower mount PSI FlutterGuard virtually eliminates pointer flutter, making the gauge easier to read and reducing excessive movement wear. Liquid-free casing results in lighter weight and eliminates the chance of gauge leakage. ASM B40.1, Grade B (± 3-2-3% accuracy) ABS plastic case c-shaped bronze safety bourdon tube (600 PSI and lower) helical wound bronze safety bourdon tube (00 PSI and higher) polycarbonate crystal black aluminum pointer GL30FG PSI Fig. Inter Minor Grad GL300FG GL3FG GL32FG GL330FG GL33FG GL340FG GL34FG GL347FG GL30FG GL3FG GL360FG GL36FG GL370FG GL37FG $ PowerFlex movement with polyester segment, designed to resist the effects of shock, vibration and pulsation. ambient temperature range of -40 F to 10 F 2½" face ¼" lower mount All Stainless Panel Builder Gauges $ suitable for corrosive environments used in gaseous and liquid media ASM B40.0 Grade A 2/1/2% full scale accuracy 316L stainless wetted parts materials ambient temperature range of -4 F to 140 F media temperature 212 F maximum dial - white aluminum with black lettering; stop pin pointer - black aluminum glycerin filled case PBLSS0 laminated safety glass window lens fits industry standard 2.6" panel hole cutout PSI Fig. Inter ½" face ¼" lower back mount Minor Grad PBLSS1 PBLSS30 PBLSS60 PBLSS0 PBLSS160 PBLSS0 PBLSS300 PBLSS400 PBLSS600 PBLSS800 PBLSS00 PBLSS100 PBLSS00 PBLSS3000 PBLSS000 $

155 PSI PSI Fig. Inter Fig. Inter Minor Grad Minor Grad All Stainless Steel Dry Gauges Stainless gauges provides the corrosion resistance and durability of a permanently sealed gauge. Designed for severe service applications. 2½" face ¼" lower mount PSI Fig. Inter ¼" lower mount GSS1 GSS30 GSS60 GSS0 GSS160 GSS0 GSS300 GSS400 GSS600 GSS00 GSS100 GSS00 GSS3000 GSS000 GSS000 GSS1-4 GSS30-4 GSS60-4 GSS0-4 GSS160-4 GSS0-4 GSS300-4 GSS400-4 GSS600-4 GSS00-4 GSS100-4 GSS00-4 GSS GSS000-4 GSS000-4 $ $ All Stainless Steel Liquid Filled Gauges 2-1-2% accuracy 2½" 304 series stainless case with stainless crimp ring 2½" face ¼" lower mount Minor Grad..2 GLSS1. GLSS30 1 GLSS60 2 GLSS0 2 GLSS160 GLSS0 GLSS300 GLSS400 GLSS600 GLSS00 GLSS100 0 GLSS00 0 GLSS GLSS000 0 GLSS000 $ ½" face 2-1-2% accuracy 304 series stainless case with stainless crimp ring polycarbonate window ¼" lower mount stainless connector 316 stainless bourdon tube and socket ambient temperature range: -40 F to 140 F GSS % accuracy 316 series stainless solid back case polycarbonate window ¼" lower mount stainless connector 316 stainless bourdon tube and socket, polyester segment ambient temperature range of -40 F to 140 F GSS160-4 Stainless gauges provides the corrosion resistance and durability of a permanently sealed gauge. Designed for severe service applications. polycarbonate window ¼" lower mount stainless connector 304 stainless case with stainless crimp ring glycerin filled ambient temperature range of -4 F to 140 F GLSS100 2

156 All Stainless Steel Liquid Filled Gauges Stainless gauges provides the corrosion resistance and durability of a permanently sealed gauge. Designed for severe service applications % accuracy 2½" 304 series stainless case with stainless crimp ring polycarbonate window ¼" center back mount stainless connector 304 stainless case with stainless crimp ring glycerin filled ambient temperature range of -4 F to 140 F PSI Fig. Inter. 2½" face ¼" center back mount Minor Grad. GLSSC GLSSC0 GLSSC160 GLSSC0 $ % accuracy on 2½"; 1% accuracy on 4" acrylic window with membrane assembly copper alloy bourdon tube movement with highly polished bearing surfaces GLBR160 Brass Liquid Filled Gauges glycerin filled ambient temperature range of -4 F to 140 F 2½" face gauges have solid cast case with polished slip-fit ring 4" face gauges have cast, silver painted case with chrome plated ring 2½" face ¼" lower mount PSI Fig. Inter Minor Grad GLBR1 GLBR30 GLBR60 GLBR0 GLBR160 GLBR0 GLBR300 GLBR400 GLBR600 GLBR00 GLBR100 GLBR00 GLBR3000 GLBR000 $ ½" face ¼" center back mount 4" face ½" lower mount PSI Fig. Inter. Minor Grad. PSI Fig. Inter. Minor Grad GLBRC1 GLBRC30 GLBRC60 GLBRC0 GLBRC160 GLBRC0 GLBRC300 GLBRC400 GLBRC600 GLBRC00 GLBRC100 GLBRC00 GLBRC3000 GLBRC000 $ GLBR1-4 GLBR30-4 GLBR60-4 GLBR0-4 GLBR160-4 GLBR0-4 GLBR300-4 GLBR400-4 GLBR600-4 GLBR00-4 GLBR100-4 GLBR00-4 GLBR GLBR000-4 GLBR0004 $