HMD914 & HMD914S PORTABLE MAGNETIC DRILLS
|
|
- Victoria Allison
- 6 years ago
- Views:
Transcription
1 HMD914 & HMD914S PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN CUTTERS
2 HOUGEN Portable Magnetic Drills Models HMD914 & HMD914S Welcome to Hougen Congratulations on your purchase of the Hougen Portable Magnetic Drill. Your model is designed to produce superior holes quickly and effi ciently. Through constant innovation and development, Hougen is committed to provide you with hole-producing tools and products to help you be more productive. Before attempting to operate your new Portable Magnetic Drill, please read all instructions fi rst. These include the Operator s Manual and Warning Label on the unit itself. With proper use, care, and maintenance, your model will provide you with years of effective hole drilling performance. Once again, thank you for selecting our product and welcome to Hougen. Specifications Cutter Type...Hougen 12,000-Series Hole Capacity...7/16 to 2-1/16 Depth of Cut...3 Motor RPM, 11.2A Net Weight...44 Lbs Commercial / Industrial Limited Warranty Hougen Manufacturing, Incorporated warrants its Portable Magnetic Drills and its Electro-hydraulic Hole Punchers for a period of 1 year and other products for ninety (90) days from date of purchase against defects due to faulty material or workmanship and will repair or replace (at its option) without charge any items returned. This warranty is void if the item has been damaged by accident or unreasonable use, neglect, improper service, or other causes not arising out of defects in material or workmanship. No other expressed warranty is given or authorized. Hougen Manufacturing, Inc. disclaims any implied warranty of MERCHANTABILITY or FITNESS for any period beyond the expressed warranty and shall not be liable for incidental or consequential damages. Some states do not allow exclusions of incidental or consequential damages or limitation on how long an implied warranty lasts and, if the law of such a state governs your purchase, the above exclusion and limitation may not apply to you. This warranty gives you specifi c legal rights and you may also have other rights which vary from state to state. To obtain warranty service, return the item(s), transportation prepaid, to your nearest Factory Authorized Warranty Repair Center or to Hougen Manufacturing, Inc., 3001 Hougen Drive, Swartz Creek, Michigan Hougen Drills are warranted against manufacturing defects only. Subject to Hougen Manufacturing inspection. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Hougen Manufacturing, Inc. Hougen Patent Notice The products in this manual may be covered by one or more of the following U.S. patents, foreign patents, and pending patents: Photographs and Specifi cations shown are accurate in detail at time of printing. Manufacture reserves the right to make improvements and modifi cations without prior notice. Hougen, Hougen-Edge, and Punch Pro are proprietary trademarks of Hougen Manufacturing Inc. Ogura and the Ogura logo are proprietary trademarks of Ogura & co., Ltd. Vac-Pad are propriety trademark of Drillmate PTY, Ltd. 2
3 INDEX WELCOME TO HOUGEN 2 COMMERCIAL WARRANTY 2 UNPACKING YOUR DRILL 3 SAFETY INSTRUCTIONS 4-5 SAFETY SWITCH INDICATOR LIGHT 5 OPERATING INSTRUCTIONS 6 INSTALLING HOUGEN CUTTERS 7 FRONT SUPPORT BRACKET SETUP 8 DRILL MAINTENANCE 8 COOLANT BOTTLE ASSEMBLY 9 ELECTRICAL PANEL LAYOUTS 10 WIRING DIAGRAM 11 MOTOR LAYOUT AND COMPONENTS EXPLODED VIEW 14 PARTS LISTING 15 WARRANTY SERVICE CENTERS 16 Unpacking Your New Portable Magnetic Drill 1. Open shipping carton and remove the literature and hardware packages. 2. Read and follow all Instructions before attempting to operate your new Magnetic Drill. 3. Complete and mail the Product Registration Card NOW. It is important that Hougen Manufacturing, Inc. have a record of product ownership. 4. Open hardware package and check contents /8 Allen Wrench for Gib Adjustment Feed handles (3) Feed handle knobs (3) /16 Allen Wrench for reversing feed handle Safety Chain /32 Allen Wrench for cutter installation /32 Allen Wrench for arbor installation 5. Using the handle of the Magnetic Drill, lift unit out of the shipping case. 6. Remove all packing and securing material from the drill unit. 7. Screw the three Knobs (04532) onto the three feed handles (10569) and then screw the handles into the hub. Do not overtighten. 8. Your Magnetic Drill was factory adjusted prior to shipping. Check to make sure that all gib adjustment screws, motor mount screws, front support bracket screws, and magnet mounting screws are snug and have not vibrated loose in transit. 9. Your New Magnetic Drill comes complete with arbor mounted. The 3/4 diameter arbor bore fi ts all 3/4 - shank 12,000-Series Hougen Cutters. SAFETY FIRST Always wear eye protection while using cutting tools, or in the vicinity of cutting. CAUTION! The slug is ejected at the end of the cut. Do not aim cutter or arbor so that ejected slug may hit someone around, or below you. CAUTION! Cutters are sharp. Wear gloves when installing or removing cutter from arbor. Do not grab a rotating cutter. CAUTION! To prevent electric shock, do not use power tools near wet areas, or where power tool may become wet. 3
4 1. Read All Instructions Important Safety Instructions WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: Extension Cord Table 2. Grounding Instructions This tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with a 3-conductor cord and a 3-prong grounding type plug to fi t the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. (Refer to Plug Diagram) Section A 3. Safe Electrical Connection Your Mag Drill is rated for use on 115VAC (Plug A) or 230V (Plug B) at 50-60Hz. Do not attempt to use drill on power sources rated other than this. Wet electrical connections are shock hazards. To prevent the cutting fl uid from traveling along the cord and contacting the plug or power outlet, tie a drip loop in the power cord. Also elevate extension cords or gang box connections. 4. Extension Cords Use only 3-wire extension cords that have 3-prong grounding type plugs and 3-pole receptacles that accept the tool s plug. Replace or repair damaged cords. Make sure the conductor size is large enough to prevent excessive voltage drop which will cause loss of power and possible motor damage. 5. Do Not Force Tool It will do the job better and faster at the rate for which it was intended. 6. Keep Work Area Clean Cluttered areas and benches invite injuries. Keep dirt and chips from under the Cutter area. 7. Consider Work Area Environment Do not expose tool to rain. Do not use tool in damp or wet locations. Keep work area well lit. Do not use tool in presence of fl ammable liquids or gases. Disconnect from power source when changing cutters or maintaining drill. 8. Guard Against Electric Shock Prevent body contact with grounded surfaces. For example: pipes, radiators, ranges, refrigerator enclosures. 9. Keep Children Away Do not let visitors contact tool. All visitors should be kept away from work area while in use. 10. Store Idle Tools When not in use, tools should be stored in a dry, and high or locked-up place out of reach of children. 11. Use Right Tool Do not force small tool or attachment to do the job of a heavy duty tool. Do not use tool for purpose not intended for example do not use a circular saw for cutting tree limbs or logs. LENGTH OF CORD, FEET RECOMMENDED WIRE GAUGE 115V MOTOR AMPS Plugs and Receptacles 12. Non-Conforming Cutting Tools Your Mag Drill is designed to use Hougen Cutters. The use of drilling tools having different shank styles is not recommended as they may not tighten securely in the drill arbor with risk of accident or injury. 13. Secure Work Use clamps or a vise to hold work. It is safer than using your hand and it frees both hands to operate tool. 14. Always Wear Safety Glasses or Goggles RECOMMENDED WIRE GAUGE 230 V MOTOR 5-6 AMPS UP TO Grounding Pin (C) Grounding Means Grounding Pin 15. Dress Properly Do not wear loose clothing or jewelry. They might entangle with spinning chips or get caught in moving parts. Rubber gloves and nonskid foot wear are recommended when working outdoors. Wear sturdy leather gloves when working indoors. Wear protective hair covering to contain long hair. 16. Do Not Abuse Cord Never carry drill unit by its cord or yank it to disconnect from receptacle. Keep cord away from heat, oil, and sharp edges. (A) 17. Do Not Overreach Keep proper footing and balance at all time. (B) (D) 4
5 Important Safety Instructions - Continued 18. Maintain Tools With Care Keep tools sharp and clean for better and safer performance. Do not use dull or broken Hougen Cutters. Follow instructions for lubricating and changing accessories.inspect tool cords periodically and, if damaged, have repaired by authorized service facility. Inspect extension cords periodically and, if damaged, have repaired by authorized service facility. Keep handles dry, clean, and free from oil and grease. 19. Disconnect Tools Disconnect when not in use, before servicing, and when changing cutters or accessories. 20. Remove Adjusting Keys and Wrenches Form a habit of checking to see that keys and wrenches are removed from tool before turning it on. 21. Check Damaged Parts Before further use of the drill, a part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this operator manual. Do not operate tool if switch does not turn it on and off. 22. Stay Alert Watch what you are doing and use common sense. Do not operate tool when you are tired. Have defective switches replaced by authorized service center. 23. Outdoor Use Extension Cords When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 24. Additional Safety Precautions Arbor and cutter should never be used as a handhold. Keep hands and clothing away from all moving parts. Do not use Hougen Cutters where ejected slug might cause injury (slug ejected at end of cut). Also, adhere to all operating instructions. Do not drill through any surface that may contain live electrical wiring. Drilling into a live wire could cause exposed metal parts of the drill to be made live. Remove chips wrapped around Cutter and arbor after each hole. With motor off and power disconnected, grasp chips with leather gloved hand or pliers and pull while rotating counterclockwise. Should the cutter become jammed in the work, stop the unit immediately to prevent personal injury. Disconnect the drill from the power supply and loosen jammed cutter by turning the arbor counterclockwise. Never attempt to free the jammed cutter by starting the motor. Service at authorized repair center only. 25. Operating Near Welding Equipment DO NOT operate this unit on the same work surface that welding is being performed on. Severe damage to the unit, particularly the power cord, could occur. This could also result in personal injury to the operator. 26. Circuit Breaker Changing of the circuit breaker to a higher amp rated breaker, or bypassing the circuit breaker is not recommended and will void product warranty. 27. Circuit Breaker Operation The circuit breaker is a thermal breaker. When it reaches the higher temperature rating it will trip and cause the unit to shut down. This is a protective device and can be reset after 5 to 10. To reset the breaker, press the breaker button back in. If it does not reset, let the unit cool a little longer until you can push the button in ans it stays n position. 28. Safe Electrical Connection Wet electrical connections are shock hazards. To prevent the cutting fl uid from traveling along the cord and contacting the plug or power outlet, tie a drip loop as shown. Also elevate extension cords or gang box connections. 29. Save these Instructions. SAFETY SWITCH INDICATOR LIGHT The Safety Switch Indicator Light is a Standard Safety Feature on HMD914(S) magnetic drills. Its purpose is to inform the user that an unsafe condition exists. If light is Green: In normal operation the safety switch light will be green. Motor On and Off Switches function normally. If light is Red: A condition with the safety switch exists that needs to be corrected. Possible causes: Safety Switch is defective. Have drill serviced. Uneven work surface or material. Check work surface for flatness. Dirt or chips under magnet. Clean work surface. Too thin material. Make sure material is at least 3/8 thick. HOUGEN MANUFACTURING RECOMMENDS THAT CONDITIONS ARE CORRECTED SO LIGHT TURNS GREEN. THIS ALLOWS FOR THE UNIT TO BE OPERATED IN A SAFE MANNER. When light is Red the motor will still function, but ON switch becomes a momentary switch. (The switch must be held down to operate motor.) For any questions please contact Hougen Manufacturing s Technical Service at (810)
6 Operating Instructions Always remember that the magnet s holding power is directly related to the workpiece thickness and surface condition. Since magnetic attraction diminishes with thinner material or rough surfaces, mechanical clamping of drill unit to workpiece should be used when cutting thin material (3/8 or less) or material with uneven surfaces. Note: Always form a loose knot in the power cord close to the molded plug. This prevents cutting fluid from running down the cord and into the power receptacle. (Refer to the diagram within the Safety Instructions in this manual) 1. Make sure workpiece and bottom of magnet are free of chips, oil, etc. 2. Secure unit to workpiece with safety chain. 3. Position drill by sliding it and gently feeding Arbor so that pilot point is touching center of hole to be drilled. 4. Turn magnet ON by pressing the magnet ON button. 5. Turn Feed Handle, raising the cutter until the pilot is above the work surface. 6. Open the cutting fl uid valve several full turns (Models HMD914 only) 7. Make certain that cutter is clear of workpiece and turn motor On by pressing the motor START button. 8. Feed the cutter slowly into workpiece. Only after cutting path is established to a depth of about 1/16 can full force be applied to feed handles. 9. Ease up on feed pressure as cutter starts breaking through. 10. At conclusion of cut, turn motor OFF by pressing motor STOP button. Turn feed handles to raise Arbor thereby ejecting the slug if it hasn t already fallen free. 11. Turn magnet OFF by pressing the magnet OFF button. 12. Disconnect from power source. 13. If necessary, remove chips from cutter and magnet., preferably wearing leather work gloves and/or with pliers. 14. Disconnect safety chain and you are ready to move unit to new drilling position. Special Instructions for horizontal or Overhead Operation 1. Always Use Safety Chain. 2. Use grease or animal-fat base solid lubricant applied liberally to cutter. 3. For horizontal use, apply cutting fl uid to external parts of cutter with plastic bottle or oiling can. Arbor Adjustment 1. Loosen all Gib Screws (40237) 2. Feed the drill in and out a few times and then, with top of motor slide fl ush with top of housing, tighten the Gib Screws until you feel them touch the Steel Gib (40225) 3. Feed the drill in and out again. 4. Adjust Gib screws so that there is uniform pressure from top to bottom. (Top of motor slide fl ush with top of housing) 5. Turn each Gib Screw in about 1/8 to 1/4 turn, depending upon your preference. 6. Gibs should be tight enough so that slide moves in and out smoothly with no wobble or shaking. (looseness will cause cutter breakage) 6
7 INSTALLING HOUGEN CUTTER IN ARBOR 1. Disconnect power source. 2. Lay drill on its side with feed wheel up to be sure arbor clears table if unit is in normal operating position. 3. Turn feed handles until cutter mounting set screws are exposed and then completely remove the set screws. 4. Insert proper pilot into shank end of the cutter. 5. Insert the Cutter until fl ats on cutter shank are aligned with set screw holes and is exactly perpendicular to the axis of set screw hole Set Screws go here 6. Insert Set Screws and tighten. Pilot "12000-Series" Hougen Cutter 7
8 Adjusting Arbor Support Bracket for Depth Bolt Lock Washer Flat Washer Spacer Front Support Bracket Front Support Bracket Spacer 1" & 2" Depth of Cut 3" Depth of Cut NOTE : Spacers must always be installed with short side toward arbor Drill Maintenance In order to minimize wear on moving parts and insure smoother operation and longer life, the following maintenance should be done periodically, based on use. 1. At intervals of 500 holes or 10 hours of actual running time, check all fasteners for tightness and retighten if necessary. This is especially important for fasteners required for smooth, effi cient cutting action. These include: Gib screws and nuts, motor hold down screws, skid plate screws, bracket mounting screws and nuts, housing bolts, clamp screw and front support bracket bolts. 2. Coolant bottle must be attached to inducer under pressure with shut-off valve open to lubricate inducer o-rings whenever motor, is running. 3. Apply grease to slide dovetails, brass gibs, and the feed gear rack. (For best results, use Shell Cyprina-RA or equivalent.) 4. Remove front support bracket from arbor and pack bearing with grease. (Shell Cyprina-RA or equivalent) #1 cause of cutter breakage and prematurely dull teeth is too little feed pressure Babying the cutter through the cut will only decrease tool life 8
9 COOLANT BOTTLE ASSEMBLY - P/N: See Parts List on Page 15 Checking Operation of Automatic Cutting Fluid Inducer Checking Operation of Cutting Fluid Arbor Reservoir (HMD914S) Note: The automatic cutting fl uid inducer system works on a gravity fl ow basis. Therefore, it is only effective when the drill is mounted on a horizontal or slightly inclined work surface. 1. With Magnetic Drill in operation position, turn feed handle so that the cutter and pilot are above the work surface. 2. Fill cutting fl uid bottle with cutting fl uid. 3. To test automatic cutting fl uid inducer (with the magnet ON and motor OFF), feed the arbor gently toward the work surface until the pilot is pushed up into the cutter. Open the needle valve until fl uid is visible fi lling the plastic tube. Fluid should fi lter down onto the work surface through the groove in the pilot. 4. To insure proper cutter lubrication, always make sure that the slot in the pilot is kept clean from residual buildup. 1. With magnetic drill in operating position, turn feed handle so that cutter and pilot are above the work surface. 2. With magnet turned ON and Motor OFF, fi ll reservoir by introducing cutting fl uid through slots in Arbor. Cutting fluid should not leak out. 3. Test metering capabilities of Arbor/Cutter/ Pilot assembly (magnet ON-motor OFF) by feeding the Arbor gently toward work surface until pilot is pushed up into Cutter, thus allowing fl uid to fi lter down onto work surface through groove in pilot. 4. For proper lubrication, all cutting fl uid in reservoir should empty onto work surface in no less than 15 seconds and no more than 30 seconds. 9
10 PANEL COMPONENTS Panel Assembly HMD914 P/N: HMD914S P/N: (HMD914) (HMD914S) White Wire Note: When inserting LED into wiring harness make sure red anode lines up with white wire Red Anode Part # Description Qty Magnet Switch Wire Harness LED Spacer LED Lens Cover LED Spacer Phillips Screw 3 Part # Description Qty Circuit Board On/Off Switch Faceplate (HMD914) * Wire Harness Jumper * Wire Harness Ground Faceplate (HMD914S) Power Cord 1 * Not Shown 10
11 HOOK UP DIAGRAM Motor Black Jumper Wires (White) From J5 Black from Circuit Board (P3) White from Circuit Board (P4) Motor White Power In (White) Power In (Black) Safety Switch (Blue-J4) LED (J3) Ground (Green) Blue from Circuit Board (P2) Brown from Circuit Board (P1) J1 J2 Ground (Green) From Magnet 11
12 Motor Exploded View and Parts List (115V) Torque to 4-6 in/lb Torque to in/lb (Use Loctite #242) Loctite #271 to outside of Brush Holder 12
13 Motor Bolt Sequence 1. Tighten bolts in the sequence shown to 5-10 in/lb. 2. Retighten bolts in the same sequence to in/lb Motor Parts List Part # Description Qty Motor Cord Housing, Brush End Armature Assy 115V Bearing Flat Spring Seal Flat Spring Washer Bearing Gear Housing Gear Cluster Gasket Cap. Gear Housing Lock Washer 1/ Bearing Flat Spring Gear Output Bearing Ball 1 Part # Description Qty Motor Slug Field Assy 115V Brush Plug Brush (Package of 2) Brush Holder Screw #10-32 x 1/ Washer Retaining Ring Screw 1/4-20 x 3-1/ Seal Plug Syntech grease 8 oz Baffl e Screw # Baffl e Spacer End Cap Strain Relief Spacer Screw #10-32 x Brush Holer Clip 2 13
14 EXPLODED VIEW (HMD914) (HMD914S) Arbor See Note COOLANT BOTTLE SHOWN ON PAGE Carrying Case Note 1: HMD HMD914S Includes: 05049, 10517, 40222, 40223, 40256, for Coolant arbors only 14
15 PARTS LIST Part # Description Qty Part # Description Qty Arbor HMD914S Motor Slide Arbor Sup. Bracket Assy Inducer Feed Handle Knob Screw-Slotted Hex Safety Switch Arbor Support Brkt Safety Switch Bracket O-Ring Plunger Assy Thrust Washer Arbor Spring Retaining Ring Control Panel (HMD914) Coolant Fitting Control Panel (HMD914S) Tubing 1/4 OD Magnet Cord Clamp Warning Label Roll Pin-Modifi ed Retaining Ring Cutting Fluid Valve Feed Handle Inducer Assy Screw SHC # Brass Insert Screw SHC 1/4-20 x 5/ Nylon Ferrule, 1/4 Tube Screw BHC # Shrink Tube Carrying Case Bolt-HH 1/ Brass Gibbs-Pair Ejector Collar Re. Ring Screw SHC 1/ Coolant Bottle Screw BHC # Retaining Bracket-Right Screw BHC 1/ Retaining Bracket-Left Safety Switch Ins. Shield Coolant Bottle Clamp Taper Spring Anti-Rotational Finger Spring Seat Nut-Locking Set Screw - Arbor Coolant Bottle Cap Ejector Collar Cutting Fluid Bottle Assy Steel Gib Arbor Bolt Kit Feed Gear Ground Strap Gear Rack Screw HH 1/ Bushing Bronze Washer 1/4 Int. Tooth Thrust Washer Screw SHC 1/ Set Screw 1/ Washer Flat Housing Washer 1/4 Helical Arbor Assy HMD Washer Ground Screw Motor 115V Washer 1/4 Star Hub Assy Screw SHC 1/ Set Screw 5/ Washer #10 Internal 3 15
PORTABLE MAGNETIC DRILLS
HMD914 SERIES PORTABLE MAGNETIC DRILLS COVERS DRILL PART NUMBER 0914102 FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drills Models HMD914 Welcome to Hougen Congratulations on your
More informationMODELS &10914S PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN CUTTERS
MODELS 10914 &10914S PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drills Models 10914 & 10914S Welcome to Hougen Congratulations on your
More informationHMD904 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL
HMD904 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill Model HMD904 Welcome to Hougen Congratulations on your purchase of the Hougen Portable
More informationHMD904S PORTABLE MAGNETIC DRILL
HMD904S PORTABLE MAGNETIC DRILL OPERATOR S MANUAL PATENT PENDING FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill Model HMD904S Welcome to Hougen Congratulations on your purchase
More informationHMD925 POWER FEED MAGNETIC DRILL
HMD925 POWER FEED MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill Model HMD925 Welcome to Hougen Congratulations on your purchase of the Hougen
More informationPORTABLE MAGNETIC DRILLS
MODEL HMD115 SERIES PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL COVERS DRILL MODEL 0115101 FOR USE WITH ROTALOC CUTTERS HOUGEN PORTABLE MAGNETIC DRILL Welcome to Hougen Congratulations on your purchase
More informationHMD904 SERIES PORTABLE MAGNETIC DRILL OPERATOR S MANUAL COVERS DRILL PART NUMBER , , , , &
HMD904 SERIES PORTABLE MAGNETIC DRILL OPERATOR S MANUAL COVERS DRILL PART NUMBER 090420, 0904202, 090403, 0904203, 090404 & 0904204 FOR USE WITH 2,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill
More informationMODEL HMD150 SERIES OPERATOR S MANUAL
MODEL HMD150 SERIES PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL COVERS DRILL PART NUMBERS 0150201, 0150301 & 0150401. FOR USE WITH ROTALOC PLUS CUTTERS HOUGEN Welcome to Hougen PORTABLE MAGNETIC DRILL Congratulations
More informationHMD501 PORTABLE MAGNETIC DRILL
HMD501 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL COVERS DRILL PART NUMBER 0501302 FOR USE WITH 12,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill Model HMD501 Welcome to Hougen Congratulations
More informationHMD505 SERIES PORTABLE MAGNETIC DRILL OPERATOR S MANUAL COVERS DRILL PART NUMBERS , &
HMD505 SERIES PORTABLE MAGNETIC DRILL OPERATOR S MANUAL COVERS DRILL PART NUMBERS 0505102, 0505202 & 0505402 FOR USE WITH HOUGEN 12,000-SERIES CUTTERS HOUGEN Portable Magnetic Drill Model HMD505 Welcome
More informationHMD904 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH 12,000-SERIES HOUGEN
HMD904 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH,000-SERIES HOUGEN CUTTERS HOUGEN Portable Magnetic Drill Model HMD904 Welcome to Hougen Congratulations on your purchase of the Hougen Portable
More informationCONTROL PANEL PARTS. Part # Description Qty. Part # Description Qty Momentary Switch Push Button Guard 1.
CONTROL PANEL PARTS MAGNET 7 A M P MOTOR PRESS-ON OFF / ON RELEASE- OFF 04437 17575 04644 17032 17552 04438 04449 AUS 17035 01226 17049 BLACK POWER 01835 WHITE POWER 17048 17041 MOTOR WHITE MOTOR BLACK
More informationCONTROL PANEL PARTS. Part # Description Qty. Part # Description Qty Momentary Switch Push Button Guard Rocker Switch 1
CONTROL PANEL PARTS MAGNET 7 A M P MOTOR PRESS-ON OFF / ON RELEASE- OFF 01833 17575 17032 04644 17034 17545 17035 01226 17049 BLACK POWER 01835 WHITE POWER 17048 MOTOR WHITE MOTOR BLACK Part # Description
More informationMODEL AND 10914S PANEL COMPONENTS MODEL AND 10909S PANEL COMPONENTS
MODEL 09 AND 09S PANEL COMPONENTS Panel Assembly 009 085 0907 07 06 08 05 09 P/N: 090 09S P/N: 0908 0 C BR S.N. J5 CR 0880 006 + R C + J J6 J 006 088 CR J ZD J BR ZD C + QA CR R T8 T7 T 07 T T T0 T 0065
More informationportable magnetic drills
HMD115 series portable magnetic drills operator s manual COVERS DRILL MODEL 0115201, 0115301 & 0115401 for use with Rotaloc cutters OM1151014 Printed in U.S.A. HOUGEN Portable Magnetic Drill Welcome to
More informationHMD505 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH 12,000-SERIES ROTABROACH
HMD505 PORTABLE MAGNETIC DRILL OPERATOR S MANUAL FOR USE WITH,000-SERIES ROTABROACH CUTTERS HOUGEN Portable Magnetic Drill Model HMD505 Welcome to Hougen Congratulations on your purchase of the Hougen
More informationOPERATOR S MANUAL HMD933 SERIES PORTABLE MAGNETIC DRILL
OPERATOR S MANUAL HMD933 SERIES PORTABLE MAGNETIC DRILL Covers Drill Part Numbers: 093302 0933302 0933202 093302 OM93306EF Printed in U.S.A. HOUGEN PORTABLE MAGNETIC DRILL MODEL HMD933 SERIES Welcome to
More informationMODEL HMD150 SERIES PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL COVERS DRILL PART NUMBERS , & FOR USE WITH ROTALOC PLUS CUTTERS
MODEL HMD50 SERIES PORTABLE MAGNETIC DRILLS OPERATOR S MANUAL COVERS DRILL PART NUMBERS 05020, 05030 & 05040 FOR USE WITH ROTALOC PLUS CUTTERS HOUGEN Welcome to Hougen PORTABLE MAGNETIC DRILL Congratulations
More informationoperator s manual HMD918 SERIES PORTABLE MAGNETIC DRILL
operator s manual HMD918 SERIES PORTABLE MAGNETIC DRILL Covers Drill Part Numbers: 0918102 OM9180717EF Printed in U.S.A. HOUGEN PORTABLE MAGNETIC DRILL MODEL HMD918 SERIES Welcome to Hougen Congratulations
More informationportable magnetic drills
model HMD150 Series portable magnetic drills operator s manual COVERS DRILL PART NUMBERS 0150101 for use with Rotaloc plus cutters OM1500216CSA Printed in U.S.A. HOUGEN Welcome to Hougen Portable Magnetic
More informationroto-kut frame drill
operator s manual portable magnetic drills Part No. 82-4427 roto-kut frame drill For Use with ROTO-KUT Frame Cutters roto-kut frame drill Part No. 82-4427 Welcome to Kimball Midwest Congratulations on
More informationportable magnetic drills
model HMD50 Series portable magnetic drills operator s manual COVERS DRILL PART NUMBERS 05020, 05030 & 05040 for use with Rotaloc plus cutters OM50026 Printed in U.S.A. HOUGEN Welcome to Hougen Portable
More informationoperator s manual HMD905 SERIES PORTABLE MAGNETIC DRILL
operator s manual HMD905 SERIES PORTABLE MAGNETIC DRILL Covers Drill Part Numbers: 09050 090504 090530 0905304 090540 090540 OM9050717BEF Printed in U.S.A. HOUGEN PORTABLE MAGNETIC DRILL MODEL HMD905 SERIES
More informationOPERATOR S MANUAL MODEL 10923TS
OPERATOR S MANUAL MODEL 10923TS PORTABLE ELECTRIC RAIL DRILL --- MANUAL FEED 70 LB. A.S.C.E. TO 155 LB. P.S. Serial Number: Date: Index Welcome to TRAK-STAR Page 3 Unpacking Your New Rail Drill 3 Important
More informationPUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER OPERATOR S MANUAL
PUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER OPERATOR S MANUAL Model 75004A IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the
More informationHOUGEN HMD505 EXPLODED VIEW , , &
HOUGEN HMD0 EXPLODED VIEW 000, 000, 000 & 000 0, The 000 is assembled with a Type I Plug. The 000 is assembled without an electrical plug at the end of the power cord. a c 0 b,0 0 End Panel Assembly 0v
More information75005 PUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER operator s manual COVERS HOLE PUNCHER PART NUMBERS &
75005 PUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER operator s manual COVERS HOLE PUNCHER PART NUMBERS 07551 & 755201 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions
More information75006 PUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER operator s manual COVERS HOLE PUNCHER PART NUMBERS &
75006 PUNCH PRO ELECTRO-HYDRAULIC HOLE PUNCHER operator s manual COVERS HOLE PUNCHER PART NUMBERS 07561 & 0756201 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions
More information24 Volt - 3/8" Cordless Impact Wrench
24 Volt - 3/8" Cordless Impact Wrench INSTRUCTION MANUAL Item # 3994040 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical equipment such as this, basic safety precautions should always be followed
More informationINSTRUCTION MANUAL ANGLE GRINDER PT W
INSTRUCTION MANUAL ANGLE GRINDER PT50360 4½ INCHES 120V 60Hz 600W 5A 12,000 rpm C US Note : Before operating this tool, read this manual and follow all safety rules and operating instructions. This electric
More informationMOTOR PARTS DIAGRAM. Wires to Motor. Cord
17625 17627 17605 17624 17614 17611 05462 17612 MOTOR PARTS DIAGRAM 17601 17609 17626 17608 17618 17613 17603 17602 17607 17610 17617 17628 Wires to Motor Cord 17623 17606 17602 17604 17600 17630 17632
More information05060 Coolant Bottle Assembly
Coolant Bottle Assembly 05060 Coolant Bottle Assembly 0506 Round Bottle 05059 Coolant Botttle Bracket 05065 Ball Valve 05067 Brass Barb Fitting (bottem of the bottle) 030 Vinyl Tube 07080 Brass Fitting
More informationDisc Grinder Model G 18MR G 23MR G 23MRU
Disc Grinder Model G 18MR G 23MR G 23MRU Handling instructions G23MR NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation.
More informationCompressor Duty Motor - 1 HP. Model 40132
Compressor Duty Motor - 1 HP Model 40132 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight
More informationHMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
More informationORIGINAL INSTRUCTIONS
OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this
More informationPRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:
FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS
More informationW6VB3 W8VB2. Handling instructions
Screw Driver Model W 6VM W 6V4 W 6VA4 W 6VB3 W 8VB2 Handling instructions W6VM W6V4 W6VA4 W6VB3 W8VB2 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to
More information3-Pt. Quick Hitch. Owner s Manual
3-Pt. Quick Hitch Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationPower Head E System. Owners Manual and Safety Instructions Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved.
Power Head E System Owners Manual and Safety Instructions 2006 Mantis, Div. of Schiller-Pfeiffer Inc. All Rights Reserved. Table of Contents Important Information Introduction............................1
More informationElectric Chainsaw Sharpener With Bar Mount
Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More information18V CORDLESS STAPLER/NAILER
18V CORDLESS STAPLER/NAILER MODEL NO: CONSN18LI PART NO: 6487055 OPERATION & MAINTENANCE INSTRUCTIONS LS1213 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,
More information18V Cordless Chain Saw INSTRUCTION MANUAL
18V Cordless Chain Saw INSTRUCTION MANUAL WARNING: Read and understand RULES FOR SAFE OPERATION and instructions carefully before operating. Failure to follow the safety rules and other basic safety precautions
More informationAngle Grinder Holder
Angle Grinder Holder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationASSEMBLY and OPERATING INSTRUCTIONS Mission Oaks Blvd. / Camarillo, CA 93011
SPARK PLUG CLEANER ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork
More information6 x 10 Belt Disc Sander
6 x 10 Belt Disc Sander FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500400 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT
More informationCORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414
CORDLESS TACKER MODEL NO: CCT48 PART NO: 6485070 OPERATION & MAINTENANCE INSTRUCTIONS LS0414 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read
More information4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT
SKU 241-1394 4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT Operation Manual WARNING! Please read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS
More informationElectric Chainsaw Sharpener
Electric Chainsaw Sharpener Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationWith Smart Magnet Circuitry. Slugger Portable Magnetic Drilling Machine OPERATOR S MANUAL WARNING!
Slugger Magforce With Smart Magnet Circuitry Slugger Portable Magnetic Drilling Machine OPERATOR S MANUAL WARNING! before use, be sure everyone using this machine reads and understands all safety and operating
More informationSawhorse with Chainsaw Holder
Sawhorse with Chainsaw Holder Owner s Manual Chainsaw not included. WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationTABLE OF CONTENTS. Section 1 - Important Safety Instructions Section 2 - Grounding Instructions Section 3 - Operator Cautions...
Light Tools - DC Screwdriver Operation & Maintenance Manual For Models: SKD-2000L/UL/B, SKD-2200L/UL/B, SKD-2300L/UL/B SKD-5200L/UL/B, SKD-5200P/UL/B SKD-5300L/UL/B, SKD-5300P/UL/B Dixon Automatic Tool
More informationDisc Grinder PDA-100H. Handling Instructions. Read through carefully and understand these instructions before use.
Disc Grinder PDA100H Handling Instructions Read through carefully and understand these instructions before use. 1 2 4 6 8 1 2 3 4 5 6 7 9 0 8 L K I G 1 3 5 7 15 ~30 A B 1 A D 5 9 8 B C 0 1 2 J 4 5 8 0
More informationCordless High Speed Drill
ENGLISH Cordless High Speed Drill MODEL 6503D 00039 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationOPERATOR S MANUAL COVERS PART NUMBER
TM OPERATOR S MANUAL COVERS PART NUMBER 0028602 PORTABLE 4-STROKE RAIL DRILL - MANUAL FEED 70 LB. A.S.C.E. TO 155 LB. P.S. Serial #: Date: OMRB280815 Printed in U.S.A. TRAK-STAR Portable Gas Rail Drill
More informationManual Chain Hoist. Owner s Manual
Manual Chain Hoist Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information60 Watt Industrial LED Low Bay Light
60 Watt Industrial LED Low Bay Light Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationBENCH GRINDER MODEL NO. OZBG150WA
BENCH GRINDER 150mm MODEL NO. OZBG150WA OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed:
More informationSPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA
SPECIFICATIONS 2 Forged Safety Latch Hooks Cable extends to: 44 Drop forged steel hanging bracket Heavy duty 3/16 Steel Cable Pulling Capacity: 1200 LB. One piece double ratchet gear Save This Manual You
More informationTJ lb Capacity Trailer Jack. 2-in-1 Combo With Swing Back Design. Assembly & Operating Instructions
TJ1500 1500 lb Capacity Trailer Jack 2-in-1 Combo With Swing Back Design Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information
More information1200W Paint DRYING Lamp
1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationOWNER S OPERATING MANUAL
OWNER S OPERATING MANUAL ARC 140 AMP WELDER TABLE OF CONTENTS Page Safety instructions 3-4 Inverter Arc Welder 5 Welder Information 5 Arc 140 AMP welder set up 6 Assembly instructions 6 Operation 7 Welding
More information3.5 CUbIC feet portable CEMENT MIxER 02/2015 INSTRUCTION MANUAL MODEL: KC-15CM-2 COPYRIGHT 2014 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
3.5 CUbIC feet portable CEMENT MIxER 02/2015 MODEL: KC-15CM-2 INSTRUCTION MANUAL COPYRIGHT 2014 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. WARRANTY INfORMATION 2-YEAR LIMITED WARRANTY FOR THIS CEMENT
More information1000-lb Hydraulic Truck Crane
1000-lb Hydraulic Truck Crane Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationHYDRAULIC SPRING COMPRESSOR SET
HYDRAULIC SPRING COMPRESSOR SET Model 47890 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor
More informationHeavy-Duty Drywall Dolly Cart
Heavy-Duty Drywall Dolly Cart Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationSlugger Portable Magnetic Drilling Machine OPERATOR S MANUAL WARNING!
Slugger USA5 Slugger Portable Magnetic Drilling Machine OPERATOR S MANUAL WARNING! before use, be sure everyone using this machine reads and understands all safety and operating instructions in this manual.
More information2 GALLON COOLANT PUMP
2 GALLON COOLANT PUMP Model 45333 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More information4400-Lb. Capacity Pallet Jack
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#
More informationELECTRIC HYDRAULIC GEAR PUMP
ELECTRIC HYDRAULIC GEAR PUMP 46169 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2001 by Harbor Freight Tools.
More informationAIR PAINT SHAKER OWNER'S MANUAL
AIR PAINT SHAKER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationDrum Deheader. Owner s Manual
Drum Deheader Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More information8 Inch Benchtop Buffer
8 Inch Benchtop Buffer Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:
4 AIR ANGLE GRINDER Model 95504 ASSEMBLY AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious
More information16 Inch Surface Cleaner
16 Inch Surface Cleaner Owner s Manual WARNING: Read and understand all instructions, warnings, and cautions before using this product. Failure to follow the instructions, warnings, and cautions may result
More informationAir-Operated Waste Oil Drainer
Air-Operated Waste Oil Drainer 20-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationSAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min)
3 Wheel Belt Grinder Parts Page Reorder No. PD.36 Effective October 0 SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Model Number Motor hp FLA Voltage Phase Frequency SFPM (SM/Min) Sound Level Weight Pound
More informationWHEEL KIT FOR 13 HP GENERATOR
WHEEL KIT FOR 13 HP GENERATOR 94192 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationHeavy-Duty Welding Fabrication Table
Heavy-Duty Welding Fabrication Table with Fix-Up Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More information2-Pack Indoor Simulated Dome Security Cameras
2-Pack Indoor Simulated Dome Security Cameras Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationVICE MOUNTED BEAD ROLLER
VICE MOUNTED BEAD ROLLER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationPOLISHER KIT Model 95030
3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More information2-1/4 Gallon Sprayer
2-/4 Gallon Sprayer 94008 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All rights
More information4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL
CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When
More informationHeavy-Duty Sawhorse. Owner s Manual
Heavy-Duty Sawhorse Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information50 Ft. Retractable Cord Reel
50 Ft. Retractable Cord Reel with Triple Tap Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationWR 22SE WR 25SE WR25SE. Handling instructions
WR 22SE WR 25SE WR25SE Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric
More information2-Pack Indoor/Outdoor Simulated Security Cameras. Owner s Manual
2-Pack Indoor/Outdoor Simulated Security Cameras Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationECSS. Electric Chain Saw Chain Sharpener Assembly & Operating Instructions
ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides
More informationTelescoping Pressure Washer Wand 18'
Telescoping Pressure Washer Wand 18' Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationMini Lever Hoist. Owner s Manual
Mini Lever Hoist Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information1000-Lb. Drum Truck. Owner s Manual
1000-Lb. Drum Truck Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information84in. Driveway Drag. Owner s Manual
84in. Driveway Drag Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationGarden Hose Reel with 3/4In. x 100Ft. Hose. Owner s Manual
Garden Hose Reel with 3/4In. x 100Ft. Hose Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationMini Manual Tire Changer
Mini Manual Tire Changer Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationAdjustable Steel Welding Table
Adjustable Steel Welding Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationWINDSHIELD REMOVAL KIT
WINDSHIELD REMOVAL KIT 94180 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationLarge Hydraulic Bead Breaker
Large Hydraulic Bead Breaker Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationManual Tire Changing Station
Manual Tire Changing Station Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information