4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT

Size: px
Start display at page:

Download "4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT"

Transcription

1 SKU VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT Operation Manual WARNING! Please read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL For technical questions or replacement parts, please call our toll free customer support line at (855)

2 PRODUCT SPECIFICATIONS Single speed: 200 RPM Battery: 4.0V, 1.3 Ah Charger input: 120V AC, 60 Hz, 8W Charger output: 6V DC, 300 ma Plug-in battery charger: 2 Hours Driver: 1/4" (6.35 mm) Hex GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medications. A moment of inattention while operating power tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 3. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 4. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. 5. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 3. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. 4. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 5. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous SERVICE 1. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained BATTERY AND CHARGER WARNINGS WARNING: The lithium-ion battery is an integral part of the tool. If it no longer charges properly or is damaged, the tool and battery must not be discarded as household trash, burned or thrown into water. The tool and battery must be disposed of as hazardous waste in accordance with all municipal requirements. Page 2

3 Battery and Charger Warnings (cont.) Do not incinerate a discarded battery. It can explode in a fire. Plug the charger cord directly into an electrical outlet. Charge the battery only with the charger supplied with this cordless screwdriver. Do not use the charger in wet or damp conditions. It is intended for indoor use only. Do not allow the cord to hang over the edge of a table or counter or touch hot surfaces. The charger should be kept away from sinks and hot surfaces. Do not use charger to charge any batteries other than the cordless screwdriver battery. Other batteries may explode. Do not operate charger if cord or plug is damaged. Replace damaged cord and plug immediately. Do not operate charger if it has received a sharp impact, been dropped or otherwise damaged in any way. Have a qualified technician examine the charger and repair it if necessary. For best results, charge the battery when the temperature range of the battery and the work area is 0-45º C (32-113)º F. Unplug the charger when not in use and before cleaning or maintenance. ADDITIONAL SAFETY INSTRUCTIONS FOR CHARGERS AND BATTERIES DANGER! If the battery is cracked or damaged, do not connect the tool to the charger. There is a danger of electric shock or electrocution. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of fire, electric shock or electrocution. DO NOT store the tool in locations where the temperature may reach or exceed 40º C (such as outside sheds or metal buildings in summer). The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage! The battery is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures. This tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Do not abuse the cord. To reduce the risk of damage to the electric cord or plug, never carry the charger by the cord or yank the cord to unplug. Always grasp the plug and pull to disconnect. Always keep the cord away from heat, oil and sharp edges. PREPARATION FOR RECYCLING To preserve our natural resources, please recycle or dispose of battery operated tools properly. This product contains lithium-ion batteries. Never dispose of this tool or its lithium-ion batteries in normal household garbage or in landfill sites as they will add to the pollution of the environment. Consult the local waste authority for information regarding available recycling and disposal options. Check your local listings for battery recycling centers. Page 3

4 PRODUCT FUNCTION Built-in Bits Cartridge Battery Status Indicator LED s Magnetic Bit Holder Bit Forward/Reverse Switch Barrel Assembly LED Light Trigger Switch Charger Receptacle PRODUCT LIST Description Qty Cordless Screwdriver 1 Charger 1 Operation Manual 1 Page 4

5 ASSEMBLY AND OPERATION CHARGING THE BATTERY 1. Place the cordless screwdriver near a 120V, 60 Hz electrical outlet. 2. Insert the battery charger plug (1) into the charger receptacle (2) in the handle of the cordless screwdriver (3) (Fig. 1). 3. Plug the battery charger (4) into a120v 60 Hz wall receptacle. The red charging LED indicator light (5) will turn ON when the battery is being charged. Yellow light and green light will turn ON when the battery is fully charged. 2. To remove a driver bit and replace it with another, pull out the barrel assembly and rotate the bit cartridge until the selected bit to be removed is at the top; close the barrel assembly. Then remove the exposed bit from the barrel and replace it with the 1 hex driver bit of choice. 3. This tool can work with longer hex driver bits, however, the built-in bits cartridge in the barrel assembly can only accommodate and store 1 hex driver bits. The cartridge can hold up to 9 driver bits and comes fully loaded. Note: A new battery or one that is completely exhausted should be charged for 2 hours. After normal use, the battery should be fully charged in about 2 hours. BATTERY CHARGE INDICATOR The level of charge remaining in the battery can be checked by using the battery charge indicator system that is located in the top of the screwdriver housing. Fig. 2 WARNING: Be sure to read the General Power Tool Safety, Battery and Charger Warnings and Symbols on pages 2,3 & 6 of this manual before operating this auto-load screwdriver. Before using your auto-load screwdriver, check that: INSTALLING SCREWDRIVER BITS WARNING: Never hold the screwdriver with your fingers near the switch while changing screwdriver bits. Accidentally touching the switch may start the tool and possibly cause an injury. Refer to Fig. 2 for bit selection and replacement: 1. To select a screwdriver bit simply pull forward on the barrel assembly exposing the driver bit cartridge. Then rotate the cartridge until your selected bit is at the top. Then close barrel assembly. 1. Screwdriver bit is the correct type and size and is not worn or damaged in any way. 2. Workpiece is properly secured. 3. Safety glasses are being worn. Failure to adhere to these safety rules can greatly increase the chances of injury or property damage. Page 5

6 SYMBOLS WARNING: Some of the following symbols may appear on the screwdriver. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. Page 6

7 4 V. LI-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT 2-YEAR LIMITED WARRANTY This PERFORMAX brand power tool carries a 2-Year Limited Warranty to the original purchaser. If, during normal use, this PERFORMAX power tool breaks or fails due to a defect in material or workmanship within two (2) years from the date of original purchase, simply bring this tool with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PERFORMAX agrees to have the tool or any defective part(s) repaired or replaced with the same or similar PERFORMAX product or part free of charge, within the stated warranty period, when returned by the original purchaser with original sales receipt. Notwithstanding the foregoing, this limited warranty does not cover any damage that has resulted from abuse or misuse of the merchandise. This warranty: (1) excludes expendable parts including but not limited to bits, light bulbs, and/or batteries; (2) shall be void if this tool is used for commercial and/or rental purposes; and (3) does not cover any losses, injuries to persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary from state to state. Be careful, tools are dangerous if improperly used or maintained. Seller s employees are not qualified to advise you on the use of this merchandise. Any oral representation(s) made will not be binding on seller or its employees. The rights under this limited warranty are to the original purchaser of the merchandise and may not be transferred to any subsequent owner. This limited warranty is in lieu of all warranties, expressed or implied including warranties or merchantability and fitness for a particular purpose. Seller shall not be liable for any special, incidental, or consequential damages. The sole exclusive remedy against the seller will be for the replacement of any defects as provided herein, as long as the seller is willing or able to replace this product or is willing to refund the purchase price as provided above. For insurance purposes, seller is not allowed to demonstrate any of these power tools for you. For questions, comments, technical assistance or repair parts Call toll free: (855) Page 7

8 2014 Menard, Inc., Eau Claire, WI /2014 Page 8

4 VOLT PIVOTING SCREWDRIVER

4 VOLT PIVOTING SCREWDRIVER 4 VOLT PIVOTING SCREWDRIVER 241-1395 Owner s Manual PRODUCT SPECIFICATIONS Rotation: Clockwise or counter clockwise Single speed: 220 RPM Battery: 4.0 V, 1.5 Ah Charger input: 120 V AC, 60 Hz, 8 W Charger

More information

12.0-Volt Lithium-Ion Power Source

12.0-Volt Lithium-Ion Power Source 12.0-Volt Lithium-Ion Power Source 241-0318 OPERATOR S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator s Manual. Save These Instructions For Future Reference. Page

More information

original instructions 18V Torch RFP1801

original instructions 18V Torch RFP1801 original instructions 18V Torch RFP1801 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL POWER

More information

12 Volt Lithium-Ion Impact Driver

12 Volt Lithium-Ion Impact Driver 12 Volt Lithium-Ion Impact Driver 241-0314 OPERATOR S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator s Manual. Save These Instructions For Future Reference. For

More information

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL

More information

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When

More information

26-GALLON AIR COMPRESSOR Owner s Manual

26-GALLON AIR COMPRESSOR Owner s Manual 26-GALLON AIR COMPRESSOR 207-1521 Owner s Manual PRODUCT SPECIFICATIONS Rating: 120 V, 60 Hz, Induction Amperes: 14.5A Tank Size: 26 U.S. gallons Air Delivery (CFM*)@40 PSI: 6.2 Air Delivery (CFM*)@90

More information

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.

More information

SAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9

SAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9 SAFETY AND OPERATING MANUAL 2 Original Instructions General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

More information

4.8V CORDLESS SCREWDRIVER WITH 12PC ACCESSORIES Operator s Manual

4.8V CORDLESS SCREWDRIVER WITH 12PC ACCESSORIES Operator s Manual 241-1391 4.8V CORDLESS SCREWDRIVER WITH 12PC ACCESSORIES Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original

More information

Instruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172

Instruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172 Instruction Manual CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION Model SROM 1172 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. Keyless

More information

SBC12 H Operating instructions Mode d emploi Manual de instrucciones

SBC12 H Operating instructions Mode d emploi Manual de instrucciones *254901* 254901 SBC12 H Operating instructions Mode d emploi Manual de instrucciones Safety Precautions Read all Instructions GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! Read and understand

More information

Cordless Blower. 18 Volt OZCBL18VA. To view the full range visit: Operation Manual 2 Year Replacement Warranty

Cordless Blower. 18 Volt OZCBL18VA. To view the full range visit:   Operation Manual 2 Year Replacement Warranty Cordless Blower 18 Volt Operation Manual 2 Year Replacement Warranty OZCBL18VA 1008 To view the full range visit: www.ozito.com.au SPECIFICATIONS - MODEL NO. OZCBL18VA Batteries: Charge time: No load speed:

More information

eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #:

eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Test Equipment Depot - 800.517.8431-99

More information

8-GALLON AIR COMPRESSOR Owner s Manual

8-GALLON AIR COMPRESSOR Owner s Manual 8-GALLON AIR COMPRESSOR 207-1520 Owner s Manual PRODUCT SPECIFICATIONS Rating: 120 V, 60 Hz, Induction Amperes: 12 A Tank Size: 8U.S. gallons Air Delivery (CFM*)@0 PSI: 5.2 Air Delivery (CFM*)@90 PSI:.2

More information

ELECTRIC CHAIN SAW SHARPENER

ELECTRIC CHAIN SAW SHARPENER 39-495 ELECTRIC CHAIN SAW SHARPENER Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe

More information

WR 22SE WR 25SE WR25SE. Handling instructions

WR 22SE WR 25SE WR25SE. Handling instructions WR 22SE WR 25SE WR25SE Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

Instruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S.

Instruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S. Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 ECLIPSE ENTERPRISES, INC. 13302 Chula Road, Amelia Court House, VA 23002, U.S.A 2 3 Intended use Your ECLIPSE ENTERPRISES, INC. 902-588 screwdriver

More information

12 Volt Lithium-Ion Right Angle Drill

12 Volt Lithium-Ion Right Angle Drill 12 Volt Lithium-Ion Right Angle Drill 241-0315 OPERATOR S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator s Manual. Save These Instructions For Future Reference.

More information

INSTRUCTION MANUAL. MODEL No: FLEXC-3PX FLEXC-8PX FLEXC-11PX FLEXC-12PX 10.8V Cordless Shut-off Screwdriver.

INSTRUCTION MANUAL. MODEL No: FLEXC-3PX FLEXC-8PX FLEXC-11PX FLEXC-12PX 10.8V Cordless Shut-off Screwdriver. a) Torque adjustment cover b) 1/4" F/Hex with quick change chuck c) LED indicator provides simple process information to the operator d) LED light for working in dark area e) Press button for easy Forward/Reverse

More information

TOOLPRO 18V Li-Ion Brushless Impact wrench

TOOLPRO 18V Li-Ion Brushless Impact wrench TOOLPRO 18V Li-Ion Brushless Impact wrench Instruction Manual CIW180HB.9 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill MT064 MT065 003947 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT064 MT065 Steel 0 mm 3 mm Capacities Wood 25 mm 28 mm Wood

More information

Screwdriver. Cordless 3.6V. Operating Instructions XSD-360. XU1 Power tools

Screwdriver. Cordless 3.6V. Operating Instructions XSD-360. XU1 Power tools Cordless Operating Instructions XSD-360 Screwdriver 3.6V XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XSD-360 0816 SAFETY INSTRUCTIONS

More information

Instruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170

Instruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170 Instruction Manual CORDLESS DRILL & DRIVER 18V Model SROM 1170 Product Features: Dear Valued Customer, Thank you for purchasing this Samson Power Tool. We are dedicated to providing quality Samson Power

More information

1200W CaR PoliSheR en RS4900

1200W CaR PoliSheR en RS4900 1200W Car Polisher RS4900 RS4900 8 1 2 7 3 4 5 6 A B flat nozzle C D E F 1200W Car Polisher RS4900 G H flat nozzle I J K L 4 1200W Car Polisher COMPONT LIST 1 2 3 4 5 6 7 Variable speed control Switch

More information

ATD V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual

ATD V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual ATD 10525 12V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual KNOW YOUR PRODUCT (DRILL) 1. Keyless chuck 2. Torque adjustment collar 3. Speed selector 4. Forward/reverse selector 5. Battery

More information

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com.

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com. WHAT S IN THE BOX METAL CUTTING SHEARS 500W INSTRUCTION MANUAL SPECIFICATIONS Motor: No load speed: Max. Thickness: Tool weight: 500W 0 1,600 rpm 1.2mm 2.2kg Metal Cutting Shears Hex Key ozito.com.au MCS-5000

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 607D 637D 6337D 6347D 0089 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 607D 637D 6337D 6347D

More information

Cordless Rechargeable Saw Instructions for Use

Cordless Rechargeable Saw Instructions for Use Technical data Voltage: DC 10.8V Weight: 1.25Kg Stroke rate: 0-2100/min Stroke: 15mm Cutting capacity: max diameter in wood 80mm / in soft metal 7mm Charging time: Between 5.0-5.5 Hours Battery: 1.3Ah

More information

Power Carver 50W CPC-050. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Power Carver 50W CPC-050. To view the full range visit:   Instruction Manual 3 Year Replacement Warranty Power Carver 50W Instruction Manual 3 Year Replacement Warranty CPC-050 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,

More information

CORDLESS GLUE GUN. 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au GGL-7000 WHAT S IN THE BOX. Cordless Glue Gun.

CORDLESS GLUE GUN. 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au GGL-7000 WHAT S IN THE BOX. Cordless Glue Gun. WHAT S IN THE BOX CORDLESS GLUE GUN 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: 7.2V Glue Stick Diameter: 7.2mm Glue Stick Length: 190mm Heating Time: 15sec Working Time: 45min Battery Power:

More information

Power Paint Scraper 200W CPS-200. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Power Paint Scraper 200W CPS-200. To view the full range visit:  Instruction Manual 3 Year Replacement Warranty Power Paint Scraper 200W Instruction Manual 3 Year Replacement Warranty CPS-200 WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 670D 680D 6390D R 0056 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 670D 680D 6390D Steel

More information

INSTRUCTION MANUAL. Cordless Angle Drill XAD01

INSTRUCTION MANUAL. Cordless Angle Drill XAD01 INSTRUCTION MANUAL Cordless Angle Drill XAD0 0474 ENGLISH (Original instructions) SPECIFICATIONS Model XAD0 Capacities Steel 0 mm (3/8") Wood 25 mm (") No load speed (RPM) 0 -,800 /min Overall length 34

More information

W6VB3 W8VB2. Handling instructions

W6VB3 W8VB2. Handling instructions Screw Driver Model W 6VM W 6V4 W 6VA4 W 6VB3 W 8VB2 Handling instructions W6VM W6V4 W6VA4 W6VB3 W8VB2 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to

More information

12 Volt Lithium-Ion Cordless Drill/Driver

12 Volt Lithium-Ion Cordless Drill/Driver 12 Volt Lithium-Ion Cordless Drill/Driver 241-0313 OPERATOR S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand The Operator s Manual. Save These Instructions For Future Reference.

More information

Drill Driver. Cordless 18V. Operating Instructions XDD-180. XU1 Power tools

Drill Driver. Cordless 18V. Operating Instructions XDD-180. XU1 Power tools Cordless Operating Instructions XDD-180 18V Drill Driver XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XDD-180 0916 1 2 3 4 5

More information

CAMBELT TENSION GAUGE

CAMBELT TENSION GAUGE CAMBELT TENSION GAUGE Model 96557 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product

More information

12V CORDLESS DRILL DRIVER. Model HY2150. User Manual

12V CORDLESS DRILL DRIVER. Model HY2150. User Manual 12V CORDLESS DRILL DRIVER Model HY2150 User Manual CONTENTS Section Description Page N o /N o s 1. OWNER S MANUAL & SAFETY INSTRUCTIONS 3 2. GENERAL SAFETY 3 5 3. BATTERY PACK 5 6 4. CHARGING 6 5. INSERTING/REMOVING

More information

18V CORDLESS DRILL DRIVER CDT16180

18V CORDLESS DRILL DRIVER CDT16180 18V CORDLESS DRILL DRIVER CDT16180 LX400 SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or

More information

Cordless Impact Wrench

Cordless Impact Wrench ENGLISH INSTRUCTION MANUAL Cordless Impact Wrench BTW0 00534 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH SPECIFICATIONS Capacities

More information

WR 16SE. de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru. Handling instructions

WR 16SE. de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru. Handling instructions en WR 16SE de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to

More information

CORDLESS AIR PUMP. 12V Li-ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LAP-4100 WHAT S IN THE BOX. Cordless Air Pump.

CORDLESS AIR PUMP. 12V Li-ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LAP-4100 WHAT S IN THE BOX. Cordless Air Pump. WHAT S IN THE BOX CORDLESS AIR PUMP 12V Li-ion INSTRUCTION MANUAL SPECIFICATIONS Input: Max Air Pressure: Flow Rate: Battery: Charge time: Weight with Battery: ozito.com.au 12V 160psi 14l/min 1.3Ah Li-ion

More information

BUFFER/POLISHER SYSTEM

BUFFER/POLISHER SYSTEM Owner s Manual Double Insulated BUFFER/POLISHER SYSTEM Model No. 646.10729 NRTL CAUTION: Read and follow all safety rules and operating instructions before first use of this product. Safety Rules Operation

More information

E-DRIV MD-Series DC Torque Control System Calibration Procedure

E-DRIV MD-Series DC Torque Control System Calibration Procedure Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and

More information

R18DDBL ORIGINAL INSTRUCTIONS. 18V Brushless Drill Driver

R18DDBL ORIGINAL INSTRUCTIONS. 18V Brushless Drill Driver R18DDBL ORIGINAL INSTRUCTIONS 18V Brushless Drill Driver Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical

More information

BENCH GRINDER MODEL NO. OZBG150WA

BENCH GRINDER MODEL NO. OZBG150WA BENCH GRINDER 150mm MODEL NO. OZBG150WA OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed:

More information

RD V RECIPRO/PRUNING SAW

RD V RECIPRO/PRUNING SAW RD2865 RD2865 7 1 6 2 3 5 4 8 9 RD2865 1 A B C 2 7 1 2 D E F1 F2 COMPONT LIST 1 2 3 4 5 6 7 8 9 TOOL-FREE BLADE CLAMP LEVER LOCK-OFF BUTTON HANDLE BATTERY PACK * BATTERY PACK RELEASE LATCH ON/OFF SWITCH

More information

18V Cordless Precision Clutch Shut Off Pistol Screwdriver SPC-P2625Q SPC-P2925Q SPC-P21225Q

18V Cordless Precision Clutch Shut Off Pistol Screwdriver SPC-P2625Q SPC-P2925Q SPC-P21225Q 18V Cordless Precision Clutch Shut Off Pistol Screwdriver MODEL NO.: SPC-P2325Q SPC-P2625Q SPC-P2925Q SPC-P21225Q 2 (A) (B) (C) (D) (E) (H) (F) (G) (I) (A) 1/4" Hex with quick change chuck. (B) Covered

More information

TOOLPRO 18V 2 Speed Drill Driver

TOOLPRO 18V 2 Speed Drill Driver TOOLPRO 18V 2 Speed Drill Driver Instruction Manual CDT218G.1 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 7 6 2 5 4 2 3 A1 A2 1 2 A3 B A3 B C1 C2 3 C3 D 1. FORWARD/ REVERSE ROTATION CONTROL 2. SOFT GRIP HANDLE 3. BATTERY PACK RELEASE BUTTON 4. BATTERY PACK*

More information

C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL

C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow

More information

CORDLESS LED TORCH INSTRUCTION MANUAL

CORDLESS LED TORCH INSTRUCTION MANUAL WHAT S IN THE BOX CORDLESS LED TORCH INSTRUCTION MANUAL LED Torch SPECIFICATIONS Input: 18V Number of LEDs: 1 Cree LED 3W Brightness: 250 Lumen Weight: 0.2kg ozito.com.au Battery & Charger sold separately

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill FD0 008796 ENGLISH (Original instructions) SPECIFICATIONS Model FD0 Steel 0 mm (3/8") Capacities Wood 2 mm (3/6") Wood screw 5. mm x 63 mm (7/32" X 2-/2") Machine

More information

HDE 500-A22. English. Printed: Doc-Nr: PUB / / 000 / 03

HDE 500-A22. English. Printed: Doc-Nr: PUB / / 000 / 03 HDE 500-A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

Cordless Leaf Blower Instruction Manual

Cordless Leaf Blower Instruction Manual Power Glide Limited Warranty Consumer Power Tools for Home Use World Factory, Inc. (Seller) warrants to the original Buyer only, that each POWER GLIDE portable power tool will be free from defects in material

More information

18V CORDLESS DRILL MODEL NO: CON18LiC

18V CORDLESS DRILL MODEL NO: CON18LiC 18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before

More information

SSW 18 LTX 600 SSW 18 LTX 400 BL

SSW 18 LTX 600 SSW 18 LTX 400 BL SSW 18 LTX 600 SSW 18 LTX 400 BL en Operating Instructions 5 fr Mode d'emploi 9 es Instrucciones de manejo 13 www.metabo.com SSW 18 LTX 400 BL 1 SSW 18 LTX 600 1 2 3 2 3 4 5 7 4 7 6 6 9 8 9 8 10 2 11.

More information

360 LINE LASER LEVEL. 20m Working Range WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LLT-3605 WHAT S IN THE BOX

360 LINE LASER LEVEL. 20m Working Range WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au LLT-3605 WHAT S IN THE BOX WHAT S IN THE BOX 360 LINE LASER LEVEL 20m Working Range INSTRUCTION MANUAL SPECIFICATIONS Battery: Laser Power: Working Range: Laser Diode: Accuracy: 6V DC (4 x AA Battery) Class 2,

More information

Air-Operated Waste Oil Drainer

Air-Operated Waste Oil Drainer Air-Operated Waste Oil Drainer 20-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3.

MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3. WHAT S IN THE BOX MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS Input: Voltage: No Load Speed: Stroke Length: Blade Fitment: Cutting Capacity: Weight: ozito.com.au 500W 230-240V ~ 50Hz 500-3000

More information

Cordless Line Trimmer

Cordless Line Trimmer RLT6X RLT6B ORIGINAL INSTRUCTIONS Cordless Line Trimmer Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine. Subject to technical

More information

TABLE OF CONTENTS. Section 1 - Important Safety Instructions Section 2 - Grounding Instructions Section 3 - Operator Cautions...

TABLE OF CONTENTS. Section 1 - Important Safety Instructions Section 2 - Grounding Instructions Section 3 - Operator Cautions... Light Tools - DC Screwdriver Operation & Maintenance Manual For Models: SKD-2000L/UL/B, SKD-2200L/UL/B, SKD-2300L/UL/B SKD-5200L/UL/B, SKD-5200P/UL/B SKD-5300L/UL/B, SKD-5300P/UL/B Dixon Automatic Tool

More information

GTC650L-XE Australia New Zealand

GTC650L-XE Australia New Zealand www.blackanddecker.com.au GTC650L-XE Australia New Zealand 2 11 D1 D2 D3 D4 3 ENGLISH (Original instructions) Intended use Your Black & Decker hedgetrimmer has been designed for trimming hedges, shrubs

More information

CORDLESS TORCH LIGHT. 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PXTLS-900 WHAT S IN THE BOX. Torch Light

CORDLESS TORCH LIGHT. 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au PXTLS-900 WHAT S IN THE BOX. Torch Light WHAT S IN THE BOX CORDLESS TORCH LIGHT 18V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: 18V Number of LEDs: 1 Brightness: 250 Lumen Weight: 0.2kg ozito.com.au Torch Light Battery & Charger sold

More information

Model TC-20. Tube Cut-Off Machine. Operator s Manual REV H

Model TC-20. Tube Cut-Off Machine. Operator s Manual REV H Model TC-20 Tube Cut-Off Machine Operator s Manual 90-2333 REV H Scientific Systems, Inc. 349 N. Science Park Road State College, PA 16803 www.ssihplc.com Phone: 800-441-4752 Fax: 814-238-7532 Email: sales@ssihplc.com

More information

SPECIFICATIONS MODEL NO. OZBG150WA

SPECIFICATIONS MODEL NO. OZBG150WA SPECIFICATIONS MODEL NO. OZBG150WA Input Power: 150W Input Voltage: 230V ~ 50Hz No Load Speed: 2950/min Wheel Diameter: 150mm (6 ) Wheel Thickness: 16mm Wheel Bore: 12.7mm Protection Class: 1 (earthed

More information

EC DECLARATION OF CONFORMITY

EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY 14 2500W INVERTER GENERATOR IM2500I CERTIFICATE OF GUARANTEE This product is guaranteed for a period of 1 Year, with effect from the date of purchase and applies only to the

More information

40 V HEDGE TRIMMER ATTACH YOUR RECEIPT HERE

40 V HEDGE TRIMMER ATTACH YOUR RECEIPT HERE ITEM #0796788 40 V HEDGE TRIMMER MODEL #KHT 240-07 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer

More information

2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos Part Nos. CRIL/COB/BL CRIL/COB/OR CRIL/COB/GR CRIL/COB/YW

2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos Part Nos. CRIL/COB/BL CRIL/COB/OR CRIL/COB/GR CRIL/COB/YW INSTRUCTIONS FOR 2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos.82679 Part Nos. CRIL/COB/BL 82684 CRIL/COB/OR 82685 CRIL/COB/GR 82688 CRIL/COB/YW IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY

More information

Owner s Manual. 4.8 V Cordless Screwdriver

Owner s Manual. 4.8 V Cordless Screwdriver Owner s Manual 4.8 V Cordless Screwdriver 054-2823-2 CAUTION: Before using this cordless screwdriver or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions.

More information

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 8 5 6 7 A1 A2 1 2 1 3 2 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 C2 C3 D F E 1. KEYLESS CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE

More information

15A Angle Grinder OPERATOR S MANUAL

15A Angle Grinder OPERATOR S MANUAL 15A Angle Grinder 241-0782 OPERATOR S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator s Manual. Save These Instructions For Future Reference. Page 1 table of contents

More information

EVO181B1. English

EVO181B1. English EVO181B1-TW EVO181B1-KR EVO181B1 English 4 10 16 A B 8 C EVO181B1-KR EVO181B1-TW D 2 E 13 8 9 EVO181B1-KR EVO181B1-TW F 3 ENGLISH (Original instructions) EVO181B1 MULTI TOOL Technical data Multi Tool Voltage

More information

SAFETY AND OPERATING MANUAL. Cordless Hedge Trimmer WG259E WG259E.5 WG259E.9

SAFETY AND OPERATING MANUAL. Cordless Hedge Trimmer WG259E WG259E.5 WG259E.9 SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS LITHIUM-ION BRUSHLESS DRILL DRIVER LITHIUM-ION BRUSHLESS HAMMER DRILL WU175 WU175.1 WU309 1 2 3 4 10 5 9 8 6 7 12 11 100% A1 A2 0% 1 2 A3 A4 B1 B2 2 C1

More information

SFC 18 A SFC 22 A English

SFC 18 A SFC 22 A English SFC 18 A SFC 22 A English en 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a is a prerequisite for safe, trouble-free

More information

1200W Paint DRYING Lamp

1200W Paint DRYING Lamp 1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Adjustable Steel Welding Table

Adjustable Steel Welding Table Adjustable Steel Welding Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

VICE MOUNTED BEAD ROLLER

VICE MOUNTED BEAD ROLLER VICE MOUNTED BEAD ROLLER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Electric Chainsaw Sharpener With Bar Mount

Electric Chainsaw Sharpener With Bar Mount Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

G-24V LITHIUM-ION CORDLESS HEDGE TRIMMER

G-24V LITHIUM-ION CORDLESS HEDGE TRIMMER G-24V LITHIUM-ION CORDLESS HEDGE TRIMMER 2200302 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill XFD0 0360 ENGLISH (Original instructions) SPECIFICATIONS Model XFD0 Steel 3 mm (/") Capacities Wood 38 mm (-/") Wood screw 0 mm x 89 mm (3/8" X 3-/") Machine screw

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 8 9 5 7 6 A1 A2 1 2 1 3 2 A3 B1 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 D E1 1-18 D E1 E2 E3 F 1-18 6 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR

More information

Angle Grinder Holder

Angle Grinder Holder Angle Grinder Holder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

60 Watt Industrial LED Low Bay Light

60 Watt Industrial LED Low Bay Light 60 Watt Industrial LED Low Bay Light Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 5 8 7 6 A2 A1 1 2 B1 A3 3 2 1 C1 B2 2 3 1 C2 C3 C2 C3 D E F G -- -- -- = 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE

More information

40V LITHIUM-ION CORDLESS HEDGE TRIMMER

40V LITHIUM-ION CORDLESS HEDGE TRIMMER 40V LITHIUM-ION CORDLESS HEDGE TRIMMER 22332 Some Greenworks Lithium-Ion products are sold with or without battery and charger. To order: Battery (Sold Separately) (2Ah Model # 29462 / 4Ah Model # 29472)

More information

PT-1441 Cordless Drill Driver 14.4V User s Manual

PT-1441 Cordless Drill Driver 14.4V User s Manual PT-1441 Cordless Drill Driver 14.4V User s Manual 1 st Edition, 2009 2009 Copy Right by Prokit s Industrial Co., Ltd. Please read this handbook carefully before using the tool General Safety Rules WARNING

More information

OPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual.

OPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual. OPERATOR'S MANUAL Cat. No. C12 PC M12 Cordless Copper Tubing Cutter To reduce the risk of injury, user must read and understand operator's manual. General POWER TOOL SAFETY WARNINGS WARNING Read all safety

More information

Sawhorse with Chainsaw Holder

Sawhorse with Chainsaw Holder Sawhorse with Chainsaw Holder Owner s Manual Chainsaw not included. WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and

More information

Cordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.

Cordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280. Taille-haies sans fil Cortasetos Inalámbrico F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.9 2 5 3 6 4 7 1 8 9 A B1 1 2 1 3 B2 C C B2 1 2 D1 D2 D3 E 1. BATTERY PACK* 2. REAR HANDLE

More information

CORDLESS BLOWER KIT INSTRUCTION MANUAL

CORDLESS BLOWER KIT INSTRUCTION MANUAL WHAT S IN THE BOX Cordless Blower CORDLESS BLOWER KIT INSTRUCTION MANUAL 4.0Ah Battery & Fast Charger SPECIFICATIONS Voltage: 18V Battery: 4.0Ah Li-ion Charge Time: 80 min No Load Speed: 12,000/min Max.

More information

CORDLESS AUTO-LOADING

CORDLESS AUTO-LOADING WHAT S IN THE BOX CORDLESS AUTO-LOADING SCREWDRIVER 3.6V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Voltage: 3.6V Driver Bit Size: 6.35mm (1/4 ) No Load Speed: 210/min Battery: 1.3Ah Li-ion Charge Time:

More information

IMPORTANT SAFETY INSTRUCTIONS VP200ESK SAFETY INSTRUCTIONS 1

IMPORTANT SAFETY INSTRUCTIONS VP200ESK SAFETY INSTRUCTIONS 1 IMPORTANT SAFETY INSTRUCTIONS VP200ESK SAFETY INSTRUCTIONS VP200ESK SAFETY INSTRUCTIONS 2 MAIN COMPONENTS ITEMS INCLUDED SPRAYER TANK 6.8 VOLT BATTERY -3400 mah 6.8 VOLT CHARGER NOZZLE WRENCH TANK CAP

More information

Pressure Washer Hose Reel

Pressure Washer Hose Reel Pressure Washer Hose Reel Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

model no IMPORTANT: Read and understand this instruction manual thoroughly before using the product. INSTRUCTION MANUAL

model no IMPORTANT: Read and understand this instruction manual thoroughly before using the product. INSTRUCTION MANUAL Impact Wrench no. 054-1264-8 IMPORTANT: Read and understand this instruction manual thoroughly before using the product. INSTRUCTION MANUAL 3 table of contents Technical Specifications 4 Safety Guidelines

More information

16 Inch Hanging Pendant Barn Light

16 Inch Hanging Pendant Barn Light 16 Inch Hanging Pendant Barn Light Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

PA 5000 INSTRUCTION MANUAL

PA 5000 INSTRUCTION MANUAL PA 5000 INSTRUCTION MANUAL BEFORE USING THE PA 5000, READ, UNDERSTAND AND SAVE ALL SAFETY INFORMATION AND INSTRUCTIONS, INCLUDING: BATTERY CHARGER MANUAL PA 5000 INSTRUCTION MANUAL BATTERY INFORMATION

More information