System Connection Box. Engine Connection Box. Engine. Legend. VP Wiring. VP Supply. Yard Wiring SEM C. File Name: SEM C
|
|
- Dorthy Shields
- 5 years ago
- Views:
Transcription
1 Modbus on RS To yard System Connection Box Marine Control Unit MCU Potential free relay contacts X... X6 Signals from VP system to yard IDCOM Shut Down Unit SDU Terminal Block X9 Signals to VP system from yard Power Module PM Engine Shut Down Switches Fuel Valve Engine Connection Box Legend VP Wiring Engine Sensors EMS Terminal Block X0 VP Supply Shut down Reset Yard Wiring 4VDC Main voltage supply 4VDC Backup voltage supply Yard Supply Page Title: Single line diagram System layout Date For Last Change: :57:4 Page of 8
2 Inputs X9 B6 B7 B8 B9 B0 B B B B4 Customer Interface A5 A5 All terminals X through X9 are located in the system connection box mounted on a bracket at the rear of the genset. Optional rpm signals from load sharing and synchr. units. Implemented by Volvo Penta on request Contacts for speed up and down (default) Voltage: ±V Resistance: 050 Ohm, 0.4 kohm Current: ±0 ma Outputs SD Override Idle Start blocking Acknowledge Blackout start Remote start Remote stop Speed up Speed down Potential free relay contacts X X X X4 X5 X6 X7 X8.5 Shutdown override function All shutdown's (SDU input's SS5) possible to override except overspeed shutdown, which are not possible to override 5.4 EMERGENCY STOP (OPTIONAL) Yard supply SD override indication Local Mode Indication Disconnect Genbreaker EMS communication failure Start Failure Alarm Potential free relay contacts Horn Common shut down Common alarm Max 4VDC, 0VAC not allowed, on relay contacts X9 X0 X X X X4 X5 X6 Not controlled by the MCU. Use as general purpose relay Not controlled by the MCU. Use as general purpose relay For internal use (SD override) Disconnect wires 4 and and use relay as spare Disconnect wires 4 and and use relay as spare Engine running Ready to start Ready to take load Page Title: Customer Interface Date For Last Change: 00 7:0:4 Page of 8
3 System Connection Box 4. RB 5. BZ A5 A5 5.5 EA 5.4 DA 5. LA 5. KA ,4.8,4., B6 B7 5.7 B8 B9 5.7 B0 B 5.7 B B 5.7 B4 5.9 X9 A5 A5 EA DA LA KA B6 B7 B8 B9 B0 B B B B4 X9 A5 A5 EA DA LA KA B6 B7 B8 B9 B0 B B B B4 EA 6.4 DA 6. LA 6.9 KA Speed down Speed up Remote stop Remote start Blackout start Acknowledge Start blocking Idle SD Override Page Title: User inputs, X9 terminals Date For Last Change: 09 08:8:04 Page of 8
4 System Connection Box Common alarm Common Shut down Horn Start Failure Alarm EMS Communication Failure Disconnect Genbreaker Local Mode Indication SD override indication X7 X X X X4 X5 X6 X7 X8 X BO SL 5.4 BO BO 5.9 BO 5.8 BO 5.8 BO BO4 5.9 BO BO5 5.8 BO BO BO BO8 5.9 X9 X0 X X X X4 X5 X6 Not controlled by the MCU Use as general purpose relay Not controlled by the MCU Use as general purpose relay OR 5. RB. Disconnect wires 4 and use relay as spare Disconnect wires 4 and and use relay as spare Engine running Ready to start Ready to take load SD override (Not for yard use) Page Title: Potential free contacts Date For Last Change: 09 08:0: Page 4 of 8
5 System Connection Box.7, SL 4 SL OR 4.. OR 4..4 BZ 5.0 BZ Buzzer MCU jumper settings Current mode: Voltage mode: Resistance mode: 4 Jumper is the most inner one and jumper 4 is the one closest to the edge of the circut board.6 IDCOM * SF SB OS Shut Down Unit SDU T SA S6 S5 S4 S S S S 6.9 S 6.7.6, BO 4.8 BO5 4.8 BO BO 4.7 BO BO6 BZ RPM RPM IN BI BI BI BI4 BI5 BO BO BO BO4 BO5 BO6 BO7 MCU A A A A4 A5.6 SHIELD COM AIN AIN AIN AIN4 AIN5 AIN5 AIN6 AIN6 AIN7 AIN7 AIN8 AIN8 BI6 BI7 BI8 A5.7 A7 A8 A7 A8 B7.9 B6.8 B8.0.0 LA L COM. KA H.9 DA B COM.8 EA A L COM CAN J708 CAN IDCOM H 4.7 BO8 BO8 BI9 B9. S S S S4 S5 S6 POWER OVERSPEED RUNNING S4 RUNNING S, S SHUTDOWN ALARM OR Shut Down Override Shut Down Reset SA Shut Down Acknowledge SB Shut Down Buzzer SF Broken Wire Alarm OS Overspeed SL Shut Down Lamp RESET BROKEN WIRE BROKEN WIRE ALARM OVERSPEED TEST FV RPM S6 S5 S4 S S S 4. BO9 4. BO 4. BO 4. BO0 4. BO 4. BO4 BO9 BO0 BO BO BO BO4 BI0 BI BI BI BI4 B. B.5 B0. B.4 B D RS Page Title: MCU, SDU and IDCOM Date For Last Change: 00 0:5:44 Page 5 of 8
6 Engine Connection Box.7, S 5. S LA. KA.9 DA.8 EA.6 X0 S S S S4 S5 S LA KA FA DA EA X0 S S S S4 S5 S LA KA FA DA EA 0k 0k B 7.5 LA 8.0 KA 8. B 7.5 FA 8. DA 8. EA 8.4 Fuel stop valve Coolant temperature Shut down switch Lub oil pressure Shut down switch Speed pickup 4 4 Shutdown Reset Page Title: Terminals X0 Date For Last Change: :6:0 Page 6 of 8
7 Electric Starter 6.8 B Power Module PM 6. B Optional starter contact S 68 Ohm, 7 W D The connection for Backup voltage supply is located on the right hand side of the engine below the start motor (red) is positive (black) is negative STARTER M = B B G = Emergency stop!6a FUSE Yard supply Alternator Alternator: Optional, Customer choice TO EMS TO EMS Engine 4VDC Main voltage supply 4VDC Backup voltage supply Page Title: Voltage supply, Electric Starter Date For Last Change: 00 0::06 Page 7 of 8
8 Engine 6.9 LA 6.0 KA 6. FA 6. DA 6.4 EA Fuel pressure p Crank case pressure p Cyl 6 Coolant pressure p Cyl 5 Engine Management System EMS Cyl 4 Piston cooling pressure p Cyl Exhaust temp. t Cyl Coolant temp. t Cyl p,t p,t p L L L L Oil level Coolant Level Water in fuel (B) Water in fuel (A) Sea water pressure Boost temp & pressure Oil temp & pressure Crank speed Engine speed cam shaft Page Title: Engine sensors and EMS Date For Last Change: 00 7:06:00 Page 8 of 8
ECU. Speed Switch Manual. Contents. ECU is a registered trademark of Engineering Concepts Unlimited Inc.
ECU Speed Switch Manual Contents ECU is a registered trademark of Engineering Concepts Unlimited Inc. Contents Unit review Magnetic pickup example AC input example Design Guide Troubleshooting guide 24
More informationFlight Systems. Replacement for KASSEC DESCRIPTION
DESCRIPTION The is a universal generator controller that will start, stop, and provide engine protection for most generators. Universal replacement for both the 90353 and 90354 KASSEC Compatible with most
More informationGENSET CONTROL MODULE LEVEL 1 A121CM / A241CM. Special logic to re-establish cranking following a false start.
Technical Data Sheet GENSET CONTROL MODULE LEVEL 1 A121CM / A241CM Features: Models for both 12V and 24V systems. One model for both spark ignition and diesel engines. 5-alarm light outputs with lamp-test
More informationGENSET CONTROL MODULE A121A / A241A
Technical Data Sheet GENSET CONTROL MODULE A121A / A241A Features: Models for both 12V and 24V systems. One model for both spark ignition and diesel engines. 4-alarm light outputs with lamp-test provisions.
More informationGENSET CONTROL MODULE LEVEL 0 A120A. User selectable time delays for engine start and engine stop (cool down).
Technical Data Sheet GENSET CONTROL MODULE LEVEL 0 A120A Features: One model for both spark ignition and diesel engines. 4-alarm light outputs with automatic lamp-test provision. Overspeed adjustment not
More information1. AC VOLTS: Displays generator output in voltage. 2. AC FREQUENCY: Displays the speed of the generator set in Hertz.
1. AC VOLTS: Displays generator output in voltage. 2. AC FREQUENCY: Displays the speed of the generator set in Hertz. 3. AMMETER/PERCENT OF LOAD: Displays the load on the generator in amps or in percentage.
More informationGENSET CONTROL MODULE A121H / A241H. User selectable time delays for engine start and engine stop (cool down).
Technical Data Sheet GENSET CONTROL MODULE A121H / A241H Features: Models for both 12V and 24V systems. One model for both spark ignition and diesel engines. 4-alarm light outputs with lamp-test provisions.
More informationHGM1780 AUTOMATIC GENERATOR MODULE CONTENT 1. SUMMARY PERFORMANCE AND CHARACTERISTICS SPECIFICATION OPERATION...
CONTENT 1. SUMMARY...4 2. PERFORMANCE AND CHARACTERISTICS...4 3. SPECIFICATION...5 4. OPERATION...6 4.1. DISPLAY PANEL...6 4.2. LCD ICON INSTRUCTION...7 4.3. DISPLAY INSTRUCTIONS...7 4.4. DISPLAY DESCRIPTION...8
More informationModel H30 Operation Manual
Model H30 Operation Manual Model H30 Version 1.0 August 1, 2007 2 135 West Davenport Street Rhinelander WI 54501 Phone: 866.441.7997 Fax: 866.278.0036 info@houstonst.com www.houstonst.com 3 Table of Contents
More informationHGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic
HGM1770 Automatic Generator Control Module OPERATING MANUAL Smartgen Electronic CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 4 3. SPECIFICATIONS... 5 4. OPERATION... 6 5. PROTECTION...
More informationDKG-109J AUTOMATIC MAINS FAILURE UNIT
DKG-109J AUTOMATIC MAINS FAILURE UNIT CANBUS VERSION FEATURES True RMS measurements Automatic mains failure ECU control and monitoring through J1939 CAN J1939 ECU warnings displayed as text Various engine
More informationENGEN -100/ENGEN -200 ENGINE GENERATOR CONTROLLER
ENGEN -100/ENGEN -200 ENGINE GENERATOR CONTROLLER The engine/generator controller is an integrated genset controller contained in a single, easy to install package. The controller contains a microprocessor-based
More informationDEEP SEA ELECTRONICS PLC
DEEP SEA ELECTRONICS PLC 703 AUTOMATIC START MODULE OPERATING INSTRUCTIONS Author:- John Ruddock 703 Operating Instructions Issue Beta1 25/08/2003 2:45 PM JR - 1 - >
More informationHGM501 Gen-set Controller USER MANUAL. Smartgen Technology
HGM501 Gen-set Controller USER MANUAL Smartgen Technology Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. OVERVIEW... 4 PERFORMANCE AND CHARACTERISTICS... 4 TECHNICAL DATA... 5 OPERATION... 6 4.1. BUTTON DESCRIPTION...
More informationStarting System DS-102 Series 200. Elmatik AS P.O.Box 309 NO-3471, Slemmestad T F
Starting System DS-102 Series 200 Elmatik AS P.O.Box 309 NO-3471, Slemmestad T - +47 31 28 37 83 F - +47 31 28 37 93 www.elmatik.no post@elmatik.no CONTENT 1. INTRODUCTION 3 2. TECHNICAL SPECIFICATIONS
More information60 Series Engine Controls
ECU 60 Series Engine Controls Use CAUTION since you are applying 120VAC RMS to the AC Input terminals and that it is always potentially their during engine run!!! ECU is a registered trademark of Engineering
More informationDKG-509 AUTOMATIC MAINS FAILURE UNIT
DKG-509 AUTOMATIC MAINS FAILURE UNIT CANBUS AND MPU VERSIONS DESCRIPTION The controller is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. The unit is available
More informationHGM1780. Automatic Genset Controller USER MANUAL. Smartgen Technology
HGM1780 Automatic Genset Controller USER MANUAL Smartgen Technology Smartgen Technology Co., Ltd No. 28 Jinsuo Road Zhengzhou Henan Province P. R. China Tel: 0086-371-67988888/67981888 0086-371-67991553/67992951
More informationCascade CD101 Auto-Start Controller. Installation and Operations Manual Sections 40 & 75
Cascade CD101 Auto-Start Controller Installation and Operations Manual 00-02-0594 2018-02-15 Sections 40 & 75 In order to consistently bring you the highest quality, full featured products, we reserve
More informationFM200 FLOW/NO-FLOW MONITOR INSTALLATION AND TECHNICAL MANUAL 120 VAC MODEL 6/1/2017
FM200 FLOW/NO-FLOW MONITOR INSTALLATION AND TECHNICAL MANUAL 120 VAC MODEL 6/1/2017 Maxi-Tronic, Inc. 417 Wards Corner Road Loveland, OH 45140 513.398.2500 800.659.8250 FAX: 513.398.2536 info@maxitronic.com
More informationHP21 SERVICE SUPPLEMENT UNIT INFORMATION. TSC6 Two-Speed Control
SERVICE UNIT INFORMATION SUPPLEMENT HP21 Corp. 9426 L10 Litho U.S.A. All HP21-4 and -5 units (single and three phase) are equipped with a TSC6 two-speed control. The TSC6 (A14) two-speed control contains
More informationGCU-10. Automatic Engine Control Unit Operators Manual
GCU-10 Automatic Engine Control Unit Operators Manual KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw Headquarters : No.3, Lane 201, Chien Fu St.,
More informationDKG-109 AUTOMATIC MAINS FAILURE UNIT
Tel: +90-216-466 84 60 Fax: +90-216 364 65 65 datakom@datakom.com.tr http://www.datakom.com.tr DKG-109 AUTOMATIC MAINS FAILURE UNIT FEATURES Automatic mains failure Engine control Generator protection
More informationService Bulletin Trucks
Volvo Trucks North America, Inc. Greensboro, NC USA Service Bulletin Trucks Date Group No. Page 11.2002 370 129 1(17) Electrical Schematic User Guide VN,VHD VERSION2 Electrical Schematic User Guide Contents
More informationDEEP SEA ELECTRONICS PLC
COMPLEX SOLUTIONS MADE SIMPLE DEEP SEA ELECTRONICS PLC DSE704 AUTOSTART CONTROL MODULE OPERATING MANUAL 057-042 704 Operating Instructions Issue 2.1 18/06/2007 11:27:00 JR - 1 - Deep Sea Electronics Plc
More informationANALOG CONTROL PANEL
ANALOG CONTROL PANEL 1. AC VOLTS: Displays generator output in voltage. 2. AC FREQUENCY: Displays the speed of the generator set in Hertz. 3. Percent of Load: Displays percentage of load on the generator.
More informationAQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2
AQUAVAR Intelligent Pump Controller TECHNICAL BROCHURE BCPAQIPC R2 INTRODUCTION The Aquavar Intelligent Pump Controller from utilizes an all new Aquavar platform, and combines it with over 20 years of
More informationMODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM
MODEL 520 REMOTE START ENGINE MANAGEMENT SYSTEM DSE 520 ISSUE 4 4/4/02 MR 1 TABLE OF CONTENTS Section Page INTRODUCTION... 4 CLARIFICATION OF NOTATION USED WITHIN THIS PUBLICATION.... 4 1. OPERATION...
More informationRev 29. Caution
9469200995 Rev 29 communication ports include a mini-b USB port, CAN terminals, and provisions for an optional Remote Display Panel. The following paragraphs describe the communication ports in detail.
More information12,78 779, Bore , ,22 Compression ratio. 18,1:1 Wet weight. Engine incl. cooling system, air filtration system, and frame
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 12,78
More information7,15 436, Bore , ,12 Compression ratio 18 Wet weight. Engine incl. cooling system and air filtration system
Document No General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order
More informationHGM1750 Genset Security Module USER MANUAL Smartgen Technology
HGM1750 Genset Security Module USER MANUAL Smartgen Technology CONTENT 1. SUMMARY... 4 2. PERFORMANCE AND CHARACTERISTICS... 5 3. SPECIFICATION... 7 4. OPERATION... 8 5. PROTECTION... 9 6. PARAMETER RANGE
More information7,15 436, Bore , ,12 Compression ratio. 17 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More information7,15 436, Bore , ,12 Compression ratio. 18 Wet weight
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 7,15
More informationHGM72 Automatic Generator Module OPERATING MANUAL Smartgen Electronic
HGM72 Automatic Generator Module OPERATING MANUAL Smartgen Electronic CONTENT 1 SUMMARY... 4 2 FEATURES... 4 3 SPECIFICATION... 4 4 DISPLAY SYMBOL AND OPERATION... 5 5 ALARM... 7 6 PARAMETERS TABLE (ONLY
More informationVisit our web site at AMR LS-3000, LS-3010 & LS-3020 BELT SLIP/SEQUENCE CONTROL INSTALLATION AND SETUP INSTRUCTIONS
AMR INC. DESIGN & MANUFACTURING FOR MINING WORLDWIDE P.O. BOX 234, ROCKY GAP, VA 24366 PHONE (276)928-1712 FAX (276)928-1814 Email sales@americanmineresearch.com Visit our web site at www.americanmineresearch.com
More informationInstallation Instructions
BZ-200, BZ-250, BZ-250-347 Power Pack Auto/Manual Mode Switch BZ-250, BZ-250-347 only SPECIFICATIONS Voltages BZ-200, BZ-250... 120 277 VAC, 50/60 Hz, single phase BZ-250-347... 120 347 VAC, 50/60 Hz,
More informationTelephonic Car Alarm and Remote Starter Wiring Schematics
Telephonic Car Alarm and Remote Starter Wiring Schematics CLV INPUT-OUTPUT WIRING W - W ASPECT GENERAL 2 NOTE AFTER THE WIRING IS COMPLETE ALL STICKER #'s MUST BE REMOVED 0 AMPS ANTENA 2 3 4 9 0 2 3 4
More informationEngine incl. cooling system and air filtration system Engine incl. cooling system, air filtration system, and frame. Standby Power
20110216 General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in
More informationSenior Swing Control Box. Table of Contents
*740100* 740100 2800 Overhead Consealed Series 9500 Surface Applied Series Senior Swing Control Box Installation Instructions important These instructions are presented in step-by-step sequence. It is
More informationAdvanced Battery Charger. 3 - stage charging capability (IUOU) 4.1 A / 100VAC 1.8A / 240VAC
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationECU-02 Ver2.1 Automatic Engine Control Unit Operators Manual
ECU-02 Ver2.1 Automatic Engine Control Unit Operators Manual Headquarters : No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung, TAIWAN Tel : + 886-7-8121771 Fax : + 886-7-8121775 URL : http://www.kutai.com.tw
More informationVARIFAN ELECTRONIC TEMPERATURE/ SPEED CONTROLS
(519) 235-1431 / Fax (519) 235-2852 1-866-335-1431 www.exacon.com VARIFAN ELECTRONIC TEMPERATURE/ SPEED CONTROLS ECS CONTROLS VARIABLE STAGE ALARM CONTACTS MOTOR CURVES HI-LO READINGS TEMP RAMPING 120/240
More informationLotus Service Notes Section MVc
Lotus Service Notes MVc - CIRCUIT DIAGRAMS Exige Sport 350 models from '16my start of production For '12my - '16my exige s models refer to separate section mva for manual or mvb for automatic transmission
More informationDKG-707 MULTI GENSET PARALLELLING UNIT WITH J1939 INTERFACE
DKG-707 MULTI GENSET PARALLELLING UNIT WITH J1939 INTERFACE STANDARD FEATURES Automatic and manual start Multi genset synchronization (up to 8 gensets) Multi genset load sharing (up to 8 gensets) Both
More informationGSC300. Auto Start Engine Controller. Installation and User Manual for the GSC300 Auto Start Engine Controller. Full Version
GSC300 Auto Start Engine Controller Installation and User Manual for the GSC300 Auto Start Engine Controller Full Version File: GSC300_R2_6doc September 2009 LIMITED WARRANTY POLICY: The Northern Lights
More informationOption M4 Engine control and protection Functional description Modes and sequences General product information PID controller Additional functions
DESCRIPTION OF OPTIONS Option M4 Engine control and protection Modes and sequences General product information PID controller Additional functions DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614
More informationINSTALLATION MANUAL ACL 5500 COMBUSTION SAFETY CONTROLLER
5500 COMBUSTION SAFETY CONTROL INSTALLATION MANUAL FOR 5500 COMBUSTION SAFETY CONTROLLER WARNING This manual must be read in its entirety before installation of this controller. Installation must be performed
More informationContinuous level measuring system. LevelMax. Selection Guide. Overview 2
Table of contents Page Overview 2 ------------------------------------------------------------------- Specification / application 3 ------------------------------------------------------------------- 4
More informationwith discrete output (Overspeed) with auxiliary input (Synchronizer and Load Sharing)
Document: Digital Speed Governor Versions SDG-25 SDG-35 with discrete output (Overspeed) with auxiliary input (Synchronizer and Load Sharing) Integrated Heatsink Programming and Diagnostic Port Mode and
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS WARNING: WARNING: www.altronicinc.com DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY TO LEAD IMPROPER TO IMPROPER OP- ERATION OF ENGINE THE MACHINE
More informationHGM6000K Series Automatic Generator Module OPERATING MANUAL Smartgen Electronic
HGM6000K Series Automatic Generator Module OPERATING MANUAL Smartgen Electronic CONTENT 1 SUMMARY... 4 2 PERFORMANCE AND CHARACTERISTICS... 4 3 SPECIFICATION... 6 4 OPERATION... 6 4.1 KEY FUNCTION... 6
More informationBZ-150. Installation Instructions. Power Pack SPECIFICATIONS
SPECIFICATIS Voltages...120/. 50/60Hz Load Requirements Ballast... 20amp @120/ Incandescent... 20amp @ Motor... 1HP @120/240VAC Output...225mA @ (with relay connected) Input Control... 12- Hold... 12-
More informationICON 2 1. FEATURES AND CHARACTEIRICS
ICON 2 1. FEATURES AND CHARACTEIRICS High end Micro-controller(DSP) technology Wide range of auxiliary supply: 7V to 45Vdc. Low power Consumption : 200 ma @ 12 V DC. Alphanumeric 16X4 or 16X2 LCD display
More informationGSC300 Auto Start Engine Controller
GSC300 Auto Start Engine Controller Revision 2.12 Installation and User Manual for the GSC300 Auto Start Engine Controller File: MAN-0039 R2.12, GSC300 User Manual.doc June 2014 2 of 28 Thank You For Purchasing
More informationEngine incl. cooling system and air filtration system Engine incl. cooling system, air filtration system, and frame. Standby Power.
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More informationApplication Engineering
Application Engineering February, 2009 Copeland Digital Compressor Controller Introduction The Digital Compressor Controller is the electronics interface between the Copeland Scroll Digital Compressor
More informationHGM9510 GENSET PARALLEL (WITH GENSET) UNIT USER MANUAL
HGM9510 GENSET PARALLEL (WITH GENSET) UNIT USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO.,LTD. Chinese trademark English trademark SmartGen make your generator smart SmartGen Technology Co., Ltd. No.
More information4,76 290,7 Firing order Bore
General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel. Turbocharged Number of cylinders 4 Displacement, total litre in 3 4,76 29,7
More informationGenerator Sets Controller 210. Operation Manual. Ver1.0
Generator Sets Controller 210 Operation Manual Ver1.0 Note This information could include technical inaccuracies or typographical error. Manufacturer may make improvements and/or changes in the product(s)
More informationGSC400 Series. Automatic Gen-Set Controller Manual. Revision 2.6
GSC400 Series Automatic Gen-Set Controller Manual Revision 2.6 GSC400 Automatic Gen-Set Controller Installation and User Manual MAN-0076 Rev2.6, GSC400 User Manual.doc, May 2010 2 of 105 Thank You For
More informationDKG-114 MANUAL AND REMOTE START UNIT
DKG-114 MANUAL AND REMOTE START UNIT FEATURES Both manual and remote controlled engine starting and stopping, Automatic shutdown on fault condition, Optional cooldown cycle on remote start operation, Optional
More informationBLOWER VACUUM SWITCH FAILED OPEN
F1 F1 AC BLOWER VACUUM SWITCH FAILED CLOSED AC BLOWER VACUUM SWITCH FAILED CLOSED UHS If the blower vacuum switch is closed before blower start-up, the control module will not start the blower. Pre-check
More informationAdvanced Battery Charger 0 ~ 15A 0 ~ 25A 0 ~ 35A 0 ~ 50A 0 ~ 80A. 3 - stage charging capability (IUOU) 90 ~ 264VAC (refer to de-rating curve)
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationAlarms, remote indications and safeguards for main reciprocating I.C. engines installed in unattended machinery spaces
(1980) (Rev.1 1993) (Rev.2 1996) (Rev.3 1997) Rev.4 1999) (Rev.5 Aug 2008) (Rev.6 July 2013) (Rev.7 Mar 2016) s, remote indications and safeguards for main reciprocating I.C. engines installed in unattended
More informationDPS Telecom Your Partners in Network Alarm Management
DPS Telecom Your Partners in Network Alarm Management Using the Thermalogic Temp Sensor Instructions for Using the Thermalogic Temperature Sensor with a NetGuardian This document is to be used for installation
More informationKNC-SRV-FD123-CA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and CAN BUS Natural Air Cooling MODBUS and CANopen
More informationGSC400 Series. Automatic Gen-Set Controller Manual. Revision 2.5
GSC400 Series Automatic Gen-Set Controller Manual Revision 2.5 GSC400 Automatic Gen-Set Controller Installation and User Manual Full Version File: GSC400 User Manual Rev2.5.doc, December 2009 2 of 98 Thank
More informationPowerCommand 1.2 control system
Command 1.2 control system system description The Command control system is a microprocessor-based generator set monitoring, metering and control system designed to meet the demands of today s engine driven
More informationMINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
More informationKNC-SRV-FD123-EA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and Natural Air Cooling MODBUS and CANopen Standard
More informationTechnical data TAD1641GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More informationCaddy/Polo Classic. Current Flow Diagram No. 3 / 1. Edition Glow plug relay (104)
Page 1 of 6 Current Flow Diagram No. 3 / 1 Edition 09.1998 1.9 l/47 kw Cat diesel engine, engine code 1Y From November 1996 For alternatives to relay and fuse positions as well as multi-pin connector wiring
More information6 Displacement, total Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16.12 983.7
More informationTechnical data TAD1642GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More informationAudi A4 Fitting Locations No. 803 / 1
Page 1 of 8 Audi A4 Fitting Locations No. 803 / 1 Relays Overview of relays Overview also valid for Avant models (5-door)! 1 - Relay andfuse holder F -SF- Components: -J9-, -J84-, -J807- Location for models
More informationPSM72H Push-Button Start Module
Capricorn Controls DA02PSM72H1-2 Data & Application Note Page 1 of 6 PSM72H Push-Button Start Module Genset Controls - Timers/Monitors/Trips - Battery Charging Spares & Accessories - Custom Products Ultra
More informationEPM72 Engine Protection Module
Capricorn Controls DA01EPM1-1 Data & Application Note Page 1 of 8 EPM2 Engine Protection Module Genset Controls - Timers - Monitors - Trips - Battery Charging - Spares & Accessories - Custom Products All
More informationHGM7100N SERIES (HGM7110N/7120N) GENSET CONTROLLER USER MANUAL
HGM7100N SERIES (HGM7110N/7120N) GENSET CONTROLLER USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD. Chinese trademark English trademark SmartGen make your generator smart SmartGen Technology Co.,
More informationAdvanced Battery Charger. 3 - stage charging capability (IUoU) 25A
Cxx Features: Universal AC input with active PFC Compatible with Lead Acid, Li-ion, Gel and AGM batteries Support optional remote controller (CR-) Voltage / temperature compensation with battery temp.
More informationTechnical data TAD1641VE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel Number of cylders 6 Displacement, total Firg order s 3 16,12 984 153624 Bore Stroke 144
More informationDKG-317 MANUAL AND REMOTE START UNIT
Tel: +54-11-4629-600 Fax:+54-11-4627-3500 http://www.cramelectro.com DKG-317 MANUAL AND REMOTE START UNIT FEATURES Manual starting and stopping Engine control Generator protection Built in alarms and warnings
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
D11B-A (R-51IB) 5 General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front
More informationAuto Mains Failure AMF Controller AE10113
Auto Mains Failure AMF Controller AE03 Auto Mains Failure DESCRIPTION AMF Controller AE03 is an Automatic Mains Failure controller, which activates the generator during power failure & vice versa. The
More informationHGM6400 Automatic Genset Controller (With J1939 Interface) USER MANUAL Smartgen Technology
HGM6400 Automatic Genset Controller (With J1939 Interface) USER MANUAL Smartgen Technology Chinese trademark English trademark Smartgen make your generator smart Smartgen Technology Co., Ltd No. 28 Jinsuo
More informationPowerCommand 2.2 control system
PowerCommand 2.2 control system Control system description The PowerCommand control system is a microprocessor-based generator set monitoring, metering and control system designed to meet the demands of
More informationHGM72 Automatic Generator Module OPERATING MANUAL Smartgen Electronic
HGM72 Automatic Generator Module OPERATING MANUAL Smartgen Electronic Smartgen Electronic Equipment Co., Ltd No.28 Jinsuo Road Zhengzhou Henan Province P.R.China Tel: 0086-371-67988888/67981888 0086-371-67991553/67992951/67992952
More informationDeep Sea Electronics Plc
Deep Sea Electronics Plc 550 Operators Manual Author Miles Revell Deep Sea Electronics Plc Highfield House Hunmanby Industrial Estate North Yorkshire YO14 0PH ENGLAND Tel +44 (0) 1723 890099 Fax +44 (0)
More informationDesigned for ease of integration with automation systems
BAS, 200 ~ 600V, 1/2-30HP BUILDING AUTOMATION STARTER SMARTER AND MORE VERSATILE THAN EVER Smartstart Equipped with advanced I/O including Fireman s Override and damper control, the BAS was designed from
More informationINSTALLATION MANUAL & OPERATING INSTRUCTIONS
INSTALLATION MANUAL & OPERATING INSTRUCTIONS SIGALARM MODEL 210 PMB 405; West SR 46 Sanford, FL 32771 (800) 589-3769 (407) 328-9479 Fax: (407) 328-5889 Email:info@sigalarminc.com Internet: http://www.sigalarminc.com
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
More informationGENSET CONTROL MODULE
HGM7200/HGM7100 Series AUTOMATIC GENSET CONTROL MODULE User Manual SMARTGEN TECHNOLOGY Smartgen Technology Co., Ltd No.28 Jinsuo Road Zhengzhou Henan Province P. R. China Tel: 0086-371-67988888/67981888
More informationKomatsu Power Generation Systems
Komatsu Power Generation Systems Komatsu Air-to-Air aftercooled engine Advanced Air-to-Air aftercooled Engines have been introduced. EGS Series Generators are mounted with Komatsu engines that have High
More information702 AUTOMATIC START MODULE OPERATING INSTRUCTIONS
702 AUTOMATIC START MODULE OPERATING INSTRUCTIONS > TABLE OF CONTENTS 1 DESCRIPTION OF OPERATION... 4 1.1 MANUAL MODE OPERATION... 4 1.2 AUTOMATIC MODE OF OPERATION...
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
D11B3-A (R-625IB) 5 General -stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front
More informationTG410 User Manual. Manual Revision: Min. FW Revision: Date Released: 18/12/ DynaGen Technologies Inc
TG410 User Manual Manual Revision: 6.0.0 Min. FW Revision: 1.82.09 Date Released: 18/12/2017 TG410 User Manual Table of Contents User Guide 1 Introduction 4... 5 1.1 Specifications 2 Installation 6...
More informationDycon D1532SM. EN50131/PD6662 Grade 3, 12V 2A Power Supply. Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD
Dycon D1532SM EN50131/PD6662 Grade 3, 12V 2A Power Supply Technical Description Installation and Operating Manual DYCON POWER SOLUTIONS LTD Tel: +44 (0)1443 471 900 Unit A Cwm Cynon Business Park Mountain
More informationDKG-215 MANUAL AND REMOTE START UNIT
DKG-215 MANUAL AND REMOTE START UNIT FEATURES Manual and remote starting and stopping Zero power consumption at rest Engine control mode available Generator protection Built in alarms and warnings 1 phase
More informationTechnical data TAD1353GE
General Inline four stroke diesel engine with direct injection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylinders 6 Displacement, total Firing order in 3 12,78
More informationGSC300 Auto Start Engine Controller
GSC300 Auto Start Engine Controller Revision 2.9 Installation and User Manual for the GSC300 Auto Start Engine Controller File: MAN-0039 R2.9, GSC300 User Manual.doc May 2011 2 of 29 Thank You For Purchasing
More information