Dialock Wall Terminals For outdoor and indoor use

Transcription

1 Dialock Wall Terminals For outdoor and indoor use Dialock electronic locking systemdialock TerminalsFor outdoor and indoor useprices Availability OrderingPlanning, Construction WT Wall terminal set With Legic processor or Tag-it TM -ISO processor Technical description Function: Mains operated, intelligent wall terminal for various application and design requirements. Wall reader with standard design Dimensions wall reader Electronic control unit in housing for hat rail installation Touchless activation of functions via Dialock key: Selective control of up to 4 electrical devices. Red/green LEDs for indication of the activation status. For service personnel: Indication of programming status. Infrared interface in wall reader for programming. Electronic control unit with integrated real-time clock for programming time restricted locking authorisations (setting of time zones), logging of all processes, with 4 input ports for analysing input signals (e.g. reed contact for door monitoring), with serial interface RS 232 for optional networking via online sets. Optional extension of functions by means of additional macro software. Area of application: For outdoor and indoor use: Car park barriers, gates, any type of doors, equipment and furniture, lighting, alarm systems, video surveillance. Space requirement flush mounted box Dimensions electronic control unit Wall reader: Plastic anthracite/silver coloured housing. Also available with Siedle and Merten designs. Electronic control unit: Light grey plastic housing. Technical data Technical reference Connection between wall reader and electronic control unit with four core installation cable in compliance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 50 m (Legic ) or max. length 35 m (Tag-it TM -ISO), (please contact Dialock specialist for other lengths). Installation of wall readers in flush mounted box with 2 device fastening screws with 15 mm distance (60 mm in compliance with DIN). Make sure the fastening points on the flush box are horizontal. Minimum distance between 2 wall readers 250 mm. The installation of the wall reader in metal surroundings must be planned. Wall reader Protection class IP 65 Ambient temperature (operation) C Power supply Via electronic control unit Connection Screw terminals 1.0 mm 2 Electronic control unit Protection class IP 20 Ambient temperature (operation) C Power supply 9 40 V DC or 8 36 V AC Current input <150 ma, > 300 ma Contact rating of relays Voltage <60 V DC or <125 V AC Switching current <2.0 A (momentary) Switching capacity <30 W or <60 VA Continuous current <1.0 A Data storage in the event of a power failure >10 years Relative humidity 0 95 % (non-condensating) Connection Screw terminals 2.5 mm 2 Hat rail installation M36 rail technology 6 joint units DK 14

2 Dialock Wall Terminals For outdoor and indoor use Technology System Legic Dialock Standard Dialock-Integra* Tag-it TM -ISO Dialock Standard * Version for integration into online systems. Planning by Dialock specialist is required. Ordering unit WT wall terminal set 1 Wall reader with standard design with frame 1 Electronic control unit in housing for hat rail installation Dialock electronic locking systemdialock Wall TerminalsFor outdoor and indoor useprices Availability OrderingPlanning, Construction Additional wall reader on opposite side Technical description Area of application: For protecting a door at both sides (inside and outside), with identical access authorisations. Ordering unit additional wall reader on opposite side 1 Wall reader with standard design with frame 1 Configuration transponder no. 20 (for addressing the wall reader) Technical reference If using an additional wall reader, the total length of cable for both wall readers must not exceed 50 m (please contact Dialock specialist for other lengths). Minimum distance between 2 wall readers 250 mm. The installation of the wall reader in metal surroundings must be planned. Technology System Legic Dialock Standard Tag-it TM -ISO Dialock Standard Cross reference Other accessories for wall terminal sets Page DK 66 Wall terminal set with Siedle designs Page DK 16 Wall terminal set with Merten designs Page DK 18 OS Standard Online set Page DK 21 OS Online set TCP/IP Page DK 22 DK 15

3 Dialock Design Wall Terminal For outdoor use Dialock electronic locking systemdialock Design Wall TerminalFor outdoor useprices Availability OrderingPlanning, Construction Siedle WT Wall terminal set With Legic processor or Tag-it TM -ISO processor Technical description Function: Mains operated, intelligent wall terminal for various application and design requirements. Wall reader with Siedle design Dimensions wall reader Electronic control unit in housing for hat rail installation Touchless activation of functions via Dialock key: Selective control of up to 4 electrical devices. Red/green LEDs for indication of the activation status. For service personnel: Indication of programming status. Infrared interface in wall reader for programming. Electronic control unit with integrated real-time clock for programming time restricted locking authorisations (setting of time zones), logging of all processes, with 4 input ports for analysing input signals (e.g. reed contact for door monitoring), with serial interface RS 232 for optional networking via online sets. Optional extension of functions by means of additional macro software. Dimensions electronic control unit Area of application: For outdoor and indoor use: Car park barriers, gates, any type of doors, equipment and furniture, lighting, alarm systems, video surveillance. Wall reader: Plastic housing with Siedle designs. Electronic control unit: Light grey plastic housing. Technical data Technical reference Dialock wall terminal sets with Siedle design were especially developed for the integration into the Siedle Vario intercom system. For installation in Siedle mounting frame provided on site (1 free field must be provided). Minimum distance between 2 wall readers 250 mm. Connection between wall reader and electronic control unit with four core installation cable in compliance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 50 m (Legic ), max. length 35 m (Tag-it TM -ISO), (please contact Dialock specialist for other lengths). Wall reader Protection class IP 65 (front side when installed) Ambient temperature (operation) C Power supply Via electronic control unit Connection Screw terminals 1.0 mm 2 Electronic control unit Protection class IP 20 Ambient temperature (operation) C Power supply 9 40 V DC or 8 36 V AC Current input <150 ma, >300 ma Contact rating of relays Voltage <60 V DC or <125 V AC Switching current <2.0 A (momentary) Switching capacity <30 W or <60 VA Continuous current <1.0 A Data storage in the event of a power failure >10 years Relative humidity 0 95 % (non-condensating) Connection Screw terminals 2.5 mm 2 Hat rail installation M36 rail technology 6 joint units DK 16

4 Dialock Design Wall Terminal For outdoor use Technology System Colour Legic Dialock Standard Brown metallic Titanium metallic White Silver metallic Legic Dialock Integra* Brown metallic Titanium metallic White Silver metallic Tag-it TM -ISO Dialock Standard Brown metallic Titanium metallic White Silver metallic * Version for integration into online systems. Planning by Dialock specialist is required. Ordering unit Siedle WT wall terminal set 1 Wall reader with Siedle design with clamping block 1 Electronic control unit in housing for hat rail installation Order reference For use in Siedle modules of the steel system components or for installation behind glass on request. Dialock electronic locking systemdialock Design Wall TerminalFor outdoor useprices Availability OrderingPlanning, Construction Additional wall reader on opposite side Technical description Area of application: For protecting a door at both sides (inside and outside), with identical access authorisations. Ordering unit additional wall reader on opposite side 1 Wall reader with Siedle design with clamping block 1 Configuration transponder no. 20 (for addressing the wall reader) Technical reference If using an additional wall reader, the total length of cable for both wall readers must not exceed 50 m (please contact Dialock specialist for other lengths). Minimum distance between 2 wall readers 250 mm. The installation of the wall reader in metal surroundings must be planned. Technology System Colour Legic Dialock Standard Brown metallic Titanium metallic White Silver metallic Tag-it TM -ISO Dialock Standard Brown metallic Titanium metallic White Silver metallic Cross reference Other accessories for wall terminal sets Page DK 66 Wall terminal set with standard design Page DK 14 Wall terminal set with Merten designs Page DK 18 OS Standard Online set Page DK 21 OS Online set TCP/IP Page DK 22 DK 17

5 Dialock Design Wall Terminal For indoor use Dialock electronic locking systemdialock Design Wall TerminalFor indoor useprices Availability OrderingPlanning, Construction Merten WT Wall terminal set With Legic processor or Tag-it TM -ISO processor Technical data Function: Mains operated, intelligent wall terminal for various application and design requirements. Touchless activation of functions via Dialock key: Selective control of up to 4 electrical devices. Red/green LEDs for indication of the activation status. For service personnel: Indication of programming status. Wall reader with Merten design Dimensions wall reader Electronic control unit in housing for hat rail installation Infrared interface in wall reader for programming. Electronic control unit with integrated real-time clock for programming time restricted locking authorisations (setting of time zones), logging of all processes, with 4 input ports for analysing input signals (e.g. reed contact for door monitoring), with serial interface RS 232 for optional networking via online sets. Optional extension of functions by means of additional macro software. Area of application: For indoor use: Access to guest rooms in hotels, any type of interior door, equipment and furniture, lighting. Space requirement flush mounted box Technical data Dimensions electronic control unit Wall reader: Plastic housing with Merten System M designs. Electronic control unit: Light grey plastic housing. Technical reference Dialock wall terminals with Merten design are compatible with the Merten System M switch range. Connection between wall reader and electronic control unit with four core installation cable in compliance with VDE 0815: Type J-Y (St) Y 2 x 2 x 0.8 mm (twisted pair, shielded), max. length 50 m (Legic ), max. length 35 m (Tag-it TM -ISO), (please contact Dialock specialist for other lengths). Installation of wall readers in flush mounted box with 2 device fastening screws with 15 mm distance (60 mm in compliance with DIN). Make sure the fastening points on the flush box are horizontal. Minimum distance between 2 wall readers 250 mm. The installation of the wall reader in metal surroundings must be planned. Wall reader Protection class IP 20 Ambient temperature (operation) C Power supply Via electronic control unit Connection Spring terminals 0.5 mm 2 Electronic control unit Protection class IP 20 Ambient temperature (operation) C Power supply 9 40 V DC or 8 36 V AC Current input <150 ma, >300 ma Contact rating of relays Voltage <60 V DC or <125 V AC Switching current <2.0 A (momentary) Switching capacity <30 W or <60 VA Continuous current <1.0 A Data storage in the event of a power failure >10 years Relative humidity 0 95 % (non-condensating) Connection Screw terminals 2.5 mm 2 DK 18

6 Dialock Design Wall Terminal For indoor use Technology System Colour Legic Dialock Standard Polar white Aluminium coloured White Anthracite Legic Dialock Integra* Polar white Aluminium coloured Anthracite White Tag-it TM -ISO Dialock Standard Polar white Aluminium coloured Anthracite White * Version for integration into online systems. Planning by Dialock specialist is required. Ordering unit Merten WT wall terminal set 1 Wall reader with Merten design with support ring, central plate and frame 1 Electronic control in housing for hat rail installation Order reference Different combinations of central plates and frames in all available colours of the Merten System M range on request. Please order the wall terminal set without central plate and frame separately. Dialock electronic locking systemdialock Design Wall TerminalFor indoor useprices Availability OrderingPlanning, Construction Merten WT Wall terminal set without central plate and frame Wall reader with Merten design without central plate and frame Electronic control unit in housing for hat rail installation * Version for integration into online systems. Planning by Dialock specialist is required. Ordering unit Merten WT wall terminal set without central plate and frame 1 Wall reader with Merten design with support ring 1 Electronic control unit in housing for hat rail installation Order reference Please order central plate and frame for Merten System M separately. The Merten must be specified when ordering (see Technology System Legic Dialock Standard Dialock Integra* Tag-it TM -ISO Dialock Standard Cross reference For other colours, see application brochures or Other accessories for wall terminal sets Page DK 66 Wall terminal set with standard design Page DK 14 Wall terminal set with Siedle designs Page DK 16 OS Standard Online set Page DK 21 OS Online set TCP/IP Page DK 22 DK 19

7 Dialock Accessories For wall terminals Dialock electronic locking systemdialock AccessoriesFor wall terminalsprices Availability OrderingPlanning, Construction Box For flush mounting Dialock electronic locking systemdialock accessoriesfor wall terminal setsprices Availability OrderingPlanning, Construction Distributor Technical description Plastic black. With 2 device fastening screws 15 mm. Dimensions in compliance with DIN. 14 joint units Box for flush mounting For cavity wall mounting 14 joint units Technical description Area of application: For installation of safety transformer, automatic circuit breaker, installation control relay and electronic control module. Grey plastic housing. Technical description Plastic orange. Protection class: IP 65 With hat rail. With retaining edge. Dimensions in compliance with DIN. For drill hole Ø 68 mm. For panels 7 35 mm thick. Box for cavity wall mounting Joint units (single-row) Joint units (double-row) Dialock electronic locking systemdialock accessoriesfor wall terminal setsprices Availability OrderingPlanning, Construction Hat rail Technical description Yellow chromatized steel. Conforms to EN Length 2,000 mm Hat rail DK 66

8 Dialock Door Locks Motorised mortise locks Dialock electronic locking systemdialock Door LocksMotorised mortise locksprices Availability OrderingPlanning, Construction mortise lock model SVP 2277/2278 With self-locking action Function Lock system for controlled release of locked doors (actuarial point of view) by access control systems Insurance relevant complete locking of the door in-between authorised openings Discharge controlled self-locking action, also in case of a power failure Permanent on function (do not use with fire resistant and smoke control doors) Panic release: Freely accessible by activating the lever handle from inside (escape route) Forend width 24 mm for flush doors DK 90

9 Dialock Door Locks Motorised mortise locks Area of application: Suitable for: For flush wooden or steel doors Fire resistant and smoke control doors, for use in escape and rescue routes, Dialock electronic locking system Forend: Stainless steel (quality ), Striking plate: Stainless steel (quality ), Latch, deadbolt, lock case and lever follower: Steel Finish: Closure: Deadbolt: Forend and striking plate: Matt, latch and deadbolt: Chrome plated, lock case and lever follower: Galvanized Prepared for profile cylinder 1 turn With key action, panic release, Operation with external motorised lock control, Discharge safety device Forend: Round Lever follower: 9 mm Distance B: 72 mm Connection: 12 V ±10 % to stabilised direct current Peak starting current: 1 A Stand-by current: approx. 65 ma Contact rating: 24 V with 0.1 A of internal micro switches (direct/alternating current) Standard: External dimensions in compliance with DIN 18251, subject to external monitoring according to the buildings regulation list A Pin configuration Forend width mm Supplied with 1 Motorised mortise lock 1 Striking plate 1 Set of fixing material Mounting Order reference The scope of delivery does not include the following: Inside: Lever handle and alternate spindle: 9 mm, split Outside: Fixed knob Backplates or roses Please order separately. Stainless steel matt Backset A 65 mm 24 For DIN left hand and DIN right hand use External motorised lock control Page DK 98 Connecting cable Page DK 99 Reed door contact Page DK 99 Cable transition Page DK 100 DK 91

10 Dialock Door Locks Motorised mortise locks Dialock electronic locking systemdialock Door LocksMotorised mortise locksprices Availability OrderingPlanning, Construction mortise lock model SVP 2719 With self-locking action Function Lock system for controlled release of locked doors (actuarial point of view) by access control systems Insurance relevant complete locking of the door in-between authorised openings Discharge controlled self-locking action, also in case of a power failure Permanent open function Panic release: Freely accessible by activating the lever handle from inside (escape route) Forend width 24 mm DK 92

11 Dialock Door Locks Motorised mortise locks Area of application: Suitable for: For metal profile frame doors Fire resistant and smoke control doors, For use in escape and rescue routes, Dialock electronic locking system Forend: Stainless steel (quality ), Striking plate: Stainless steel (quality ), Latch, deadbolt, lock case and lever follower: Steel Finish: Closure: Deadbolt: Forend: Lever follower: Distance B: Connection: Peak starting current: Stand-by current: Contact rating: Standard: Forend and striking plate: Matt, latch and deadbolt: Chrome plated, lock case and lever follower: Galvanized Prepared for profile cylinder 1 turn With key action, panic release, operation with external motorised lock control, discharge safety device Round 9 mm 92 mm 12 V ±10 % to stabilised direct current 1 A approx. 65 ma 24 V with 0.1 A of internal micro switches (direct/alternating current) Subject to external monitoring according to the buildings regulation list A Pin configuration Forend width mm Supplied with 1 Motorised mortise lock 1 Striking plate 1 Set of fixing material Mounting Order reference The scope of delivery does not include the following: Inside: Lever handle and alternate spindle: 9 mm, continuous Outside: Fixed knob Backplates or roses Please order separately. Stainless steel matt Backset A 35 mm 24 For DIN left hand and DIN right hand use External motorised lock control Page DK 98 Connecting cable Page DK 99 Reed door contact Page DK 99 Cable transition Page DK 100 DK 93

12 Dialock Door Locks Motorised mortise locks Dialock electronic locking systemdialock Door LocksMotorised mortise locksprices Availability OrderingPlanning, Construction mortise lock, electrically connectable Models SVP 6275 A/6278 A, SVP 6276 A/6277 A With self locking action and electrically monitored lever handle activation Function Lock system for controlled release of locked doors (actuarial point of view) by access control systems Insurance relevant complete locking of the door in-between authorized openings Locking and latch locking by spring tension after closing the door Permanent on function, permanent engagement of outside lever handle is possible Panic release: Freely accessible by activating the lever handle from inside (escape route) Operating current details: Outside handle is currentless unlinked Forend width 24 mm for flush doors DK 94

13 Dialock Door Locks Motorised mortise locks Area of application: Suitable for: For flush wooden or steel doors Fire resistant and smoke control doors, for use in escape and rescue route doors, Dialock electronic locking system Forend: Stainless steel (quality ), Striking plate: Stainless steel (quality ), Latch, deadbolt, lock case and lever follower: Steel Finish: Closure: Deadbolt: Forend and striking plate: Matt, latch and deadbolt: Chrome plated, lock case and lever follower: Galvanized Prepared for profile cylinder 1 turn With key action, Panic release, Operation with external power supply unit, Outside lever handle can be engaged Forend: Round Lever follower: Split in centre, 9 mm Distance B: 72 mm Connection: 12 V ±10 % to stabilised direct current Contact rating: 24 V with 0.1 A of internal micro switches (direct/alternating current) Standard: External dimensions in compliance with DIN 18251, Subject to external monitoring according to the buildings regulation list A Current consumption at 12 V DC: 0.4 A Pin configuration Forend width mm Supplied with 1 Motorised mortise lock 1 Striking plate 1 Set of fixing material Mounting Order reference The scope of delivery does not include the following: Inside: Lever handle and square spindle: 9 mm, split Outside: Lever handle Backplates and roses Please order separately. Stainless steel matt Backset A 65 mm 24 For DIN left hand inward and DIN right hand outward use For DIN left hand outward and DIN right hand inward use Connecting cable Page DK 99 Reed door contact Page DK 99 Cable transition Page DK 100 DK 95

14 Dialock Door Locks Motorised mortise locks Dialock electronic locking systemdialock Door LocksMotorised mortise locksprices Availability OrderingPlanning, Construction mortise lock, electrically connectable Models SVP 6710 A, SVP 6719 A With self locking action and electrically monitored lever handle activation Function Lock system for controlled release of locked doors (actuarial point of view) by access control systems Insurance relevant complete locking of the door in-between authorized openings Locking and latch locking by spring tension after closing the door Permanent open function Permanent engagement of outside lever handle is possible Panic release: Freely accessible by activating the lever handle from inside (escape route) Operating current details: Outside handle is currentless unlinked Forend width 24 mm DK 96

15 Dialock Door Locks Motorised mortise locks Area of application: Suitable for: For metal profile frame doors Fire resistant and smoke control doors, for use in escape and rescue routes, Dialock electronic locking system Forend: Stainless steel (quality ), striking plate: Stainless steel (quality ), latch, deadbolt, lock case and lever follower: Steel Finish: Closure: Deadbolt: Forend and striking plate: Matt, latch and deadbolt: Chrome plated, lock case and lever follower: Galvanized Prepared for profile cylinder 1 turn With key action, panic release, operation with external power supply unit, outside lever handle can be engaged Forend: Round Lever follower: Split in centre, 9 mm Distance B: 92 mm Connection: 12 V ±10 % to stabilised direct current Contact rating: 24 V with 0.1 A of internal micro switches (direct/alternating current) Standard: Subject to external monitoring according to the buildings regulation list A Current consumption at 12 V DC: 0.4 A Pin configuration Forend width mm Supplied with 1 Motorised mortise lock 1 Striking plate 1 Set of fixing material Mounting Order reference The scope of delivery does not include the following: Inside: Lever handle and alternate spindle: 9 mm, split Outside: Lever handle Backplates or roses Please order separately. Stainless steel matt Backset A 35 mm 24 For DIN left hand inward and DIN right hand outward use For DIN left hand outward and DIN right hand inward use Connecting cable Page DK 99 Reed door contact Page DK 99 Cable transition Page DK 100 DK 97

16 Dialock Accessories For motorised mortise locks Dialock electronic locking systemdialock AccessoriesFor motorised mortise locksprices Availability OrderingPlanning, Construction Motorised control with power supply unit model SVP-S-24 Function: SVP-S Motorised lock control as electronic control board for operating SVP 2000 motorised panic locks, for highest possible tamper resistance (automatic locking in case of power failure via electric discharge safety device, integration of external reed contact TK into latch control function), Release period can be set via potentiometer (1 15 s), status LEDs for error, sabotage and operation, selectable function parameter via DIL switch, unlocking via impulse with voltage free electric strike, "Permanent open" (switching off the self-locking action e.g. during daytime operation), as long as the contact remains closed. Messages for Unlocked, Locked, Door open/closed, Lever operation/panic release are available on the terminal strip voltage free. Terminal strip can be removed. Installed in the plastic housing with RZ-S 01 power supply unit. Technical data Motorised lock control Power supply 24 V DC, 12 V DC or 12 V AC Peak starting current 1 A Stand-by current approx. 65 ma Contact rating 12 V DC, 125 ma, 1.5 W RZ-S 01 Power supply unit Power supply 230 V AC ±10 % Dimensions (W x H x D) 300 x 230 x 85 mm Protection class IP 54 Note The permanent open function must not be used in combination with SVP 2000 on fire resistant and smoke control doors, as it cannot be guaranteed that the door remains closed in case of fire. Pin configuration Material Finish Plastic White DK 98

17 Dialock Accessories For motorised mortise locks Dialock electronic locking systemdialock AccessoriesFor motorised mortise locksprices Availability OrderingPlanning, Construction Connecting cable model SVP-A-1000 Suitable for: Diameter: Cable length: Dialock electronic locking system 12-pins, highly flexible, coupling fixed to one side for guaranteed correctly poled connection with the lock Cable 6.5 mm 10 m Pin configuration Finish Grey Dialock electronic locking systemdialock AccessoriesDorma motorised mortise lock accessoriesprices Availability OrderingPlanning, Construction Reed door contact TK 210, 203 Area of application: Suitable for: Voltage: Alternating current: Cable length: Switching distance: Supplied with: For screw fixing to wooden or metal doors Dialock electronic locking system, Identifying the information "door locked" N/C contact 42 V <0.5 A 4 m <10 mm Fixing material Material Finish Plastic White TK Brown TK DK 99

18 Dialock Accessories For motorised mortise locks Dialock electronic locking systemdialock AccessoriesFor motorised mortise locksprices Availability OrderingPlanning, Construction Cable transition models KUE 260, 480 Function: In order to guarantee that the cable transition between door and frame is tamper-proof and not being squashed Area of application: For pulling flexible cable up to Ø 8 mm through Suitable for: Dialock electronic locking system Installation: Concealed Pivot point: Door hinge <18/36 mm Opening angle: KUE 260: 110 /KUE 480: 180 Material Finish KUE 260 KUE 480 Flexible hose 155 mm Flexible hose 370 mm Stainless steel Matt Supplied with 1 Flexible hose 1 Receiver DK 100

19 Dialock Multiple Locking Devices For entrance doors Dialock electronic locking systemdialock Multiple Locking DevicesFor entrance doorsprices Availability OrderingPlanning, Construction Model Secury Automatic A opener With 2 automatic latch bolts Area of For rebated wooden doors, application: suitable for Dialock electronic locking system Forend: Steel or stainless steel, automatic latch bolt and deadbolt: Zinc alloy with hardened steel core, latch and lever follower: Zinc alloy, lock cases: Steel Finish: Forend: ferguard*silver or matt Tested to VdS guideline 2292 class A, with key action, with latch and deadbolt, 1 turn Mounting: For DIN left hand and DIN right hand use Closure: Prepared for profile cylinder Nominal voltage: 12 V AC 50 Hz, 12 V DC Current input: < 1 A Protection class: IP 40 With 2 automatic latch bolts that are pre-locked automatically when closing the door Technical data Backset mm A Distance mm B Lever handle height mm C 1,020 1,050 Forend length mm D 2,285 2,285 Forend width mm 16 16/20 Lever follower mm Opening and locking function Automatic locking: Automatic latch bolts are automatically pre-locked when the door is being closed. Automatic release (motor driven): From inside: By push button, e.g. intercom. Latch and automatic latch bolt are retracted simultaneously. From outside: By Dialock electronic locking system. Mechanical activation (always possible): From inside: By lever handle activation. From outside: With key. Note For more detailed information about the lock cases please refer to the information pages in the Häfele Architectural Hardware catalogue. Backset A Forend width Stainless steel Steel mm mm matt ferguard*silver Supplied with 1 Multiple locking device 1 Connecting cable approx. 6 m with plug and wire end sleeves 1 Plug with wire end sleeves Lock cases and locking plates Page DK 101 Striking plates Page DK 104 Hinge side protection Page DK 107 Electric strike and exchange components Page DK 108 Cable transition Page DK 114 DK 101

20 Dialock Multiple Locking Devices For entrance doors Dialock electronic locking systemdialock Multiple Locking DevicesFor entrance doorsprices Availability OrderingPlanning, Construction Model Secury Automatic A opener With 2 automatic latch bolts Area of For rebated metal and plastic doors, application: suitable for Dialock electronic locking system Forend: Stainless steel, automatic latch bolt and deadbolt: Zinc alloy with hardened steel core, latch and lever follower: Zinc alloy, lock cases: Steel Finish: Forend: Matt Tested to VdS guideline 2292 class A, with key action, with latch and deadbolt, 1 turn Mounting: For DIN left hand and DIN right hand use Closure: Prepared for profile cylinder Nominal voltage: 12 V AC 50 Hz, 12 V DC Current input: < 1 A Protection class: IP 40 With 2 automatic latch bolts that are pre-locked automatically when closing the door Technical data Backset mm A Distance mm B 92 Lever handle height mm C 1,020 Forend length mm D 2,285 Forend width mm 24 Lever follower mm 8 Opening and locking function Automatic locking: Automatic latch bolts are automatically pre-locked when the door is being closed. Automatic release (motor driven): From inside: By push button, e.g. intercom. Latch and automatic latch bolt are retracted simultaneously. From outside: By Dialock electronic locking system. Mechanical activation (always possible): From inside: By lever handle activation. From outside: With key. Note For more detailed information about the lock cases please refer to the information pages in the Häfele Architectural Hardware catalogue. Backset A Forend width Stainless steel mm mm matt Supplied with 1 Multiple locking device 1 Connecting cable approx. 6 m with plug and wire end sleeves 1 Plug with wire end sleeves Lock cases and locking plates Page DK 101 Striking plates Page DK 104 Hinge side protection Page DK 107 Electric strike and exchange components Page DK 108 Cable transition Page DK 114 DK 102

21 Dialock Accessories For multiple locking devices Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Locking plate For automatic latch or solid bolt Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate For automatic latch or solid bolt, concealed Area of application: For multiple locking devices with Secury MR Without cover housing, for groove mounting Zinc alloy For forend: 20 mm Rebate gap: 4 mm Closing pressure adjustable ±1 mm Area of application: For Secury Automatic A opener and Secury MR multiple locking devices Steel For forend: 20 mm Rebate gap: 4 mm Dimension Y: 13 mm Closing pressure adjustable by ±1 mm Finish ferguard*silver Finish ferguard*silver Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Lock case For automatic latch or solid bolt Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Locking plate For automatic latch Area of application: With multiple locking device Secury Automatic and MR With cover housing Zinc alloy For forend: 20 mm Rebate gap: 4 mm Closing pressure adjustable 0 or +1 mm Finish Packing, pieces ferguard*silver 1 or Nickel plated matt 1 or Area of application: For multiple locking devices Secury Automatic A opener Stainless steel For forend: 24 mm Rebate gap: mm Finish Matt DK 103

22 Dialock Accessories For multiple locking devices Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Lock case For automatic latch Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled security striking plate Area of application: For multiple locking devices Secury Automatic A opener With cover housing Stainless steel For forend: 24 mm Rebate gap: mm Closing pressure adjustable by +2 mm DIN left hand Finish Matt Area of application: For forend: Rebate gap: For Secury multiple locking devices, for rebated wooden doors Steel 20 mm 4 mm Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Lock case For automatic latch Finish DIN left hand DIN right hand ferguard*silver Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled security striking plate Area of application: For multiple locking devices Secury Automatic A opener With cover housing Stainless steel For forend: 24 mm Rebate gap: mm Closing pressure adjustable by +2 mm Finish Matt DIN left hand Area of application: For forend: Rebate gap: For Secury multiple locking devices, for rebated wooden doors Prepared for electric strike and exchange components Steel 20 mm 4 mm Finish DIN left hand DIN right hand ferguard*silver DK 104

23 Dialock Accessories For multiple locking devices Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled security striking plate Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate DIN left hand DIN left hand Area of For Secury multiple locking devices, application: for rebated wooden doors For forend: 20 mm Rebate gap: 4 mm With exchange component Area of For Secury multiple locking devices, application: for rebated wooden doors Steel For forend: 16 mm Rebate gap: 4 mm With exchange component, adjustable by 3 mm Material Finish DIN left hand DIN right hand Steel ferguard*silver Stainless steel Matt Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate Finish DIN left hand DIN right hand ferguard*silver Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate DIN left hand Area of application: For forend: Rebate gap: For Secury multiple locking devices, for rebated wooden doors Prepared for electric strike/exchange components Steel 16 mm 4 mm Finish DIN left hand DIN right hand ferguard*silver DIN left hand Area of application: For forend: Rebate gap: For Secury multiple locking devices, for rebated wooden doors Steel 20 mm 4 mm Finish DIN left hand DIN right hand ferguard*silver DK 105

24 Dialock Accessories For multiple locking devices Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate DIN left hand Area of application: For forend: Rebate gap: Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate For Secury multiple locking devices, for rebated wooden doors Prepared for electric strike and exchange components Steel 20 mm 4 mm Finish DIN left hand DIN right hand ferguard*silver DIN left hand Area of application: For Secury multiple locking devices, for wooden doors Mounting: For DIN left hand and DIN right hand use Steel For forend: 20 mm Rebate gap: 4 mm Finish ferguard*silver DIN left hand Area of application: For Secury multiple locking devices, for rebated wooden doors For forend: 20 mm Rebate gap: 4 mm With exchange component, adjustable by 3 mm Material Finish DIN left hand DIN right hand Stainless steel Matt Steel ferguard*silver DK 106

25 Dialock Accessories For multiple locking devices Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Angled striking plate Dialock electronic locking systemdialock AccessoriesFor multiple locking devicesprices Availability OrderingPlanning, Construction Hinge side protection DIN left hand Area of application: Mounting: Rebate gap: For forend: Against lifting out the door on the hinge side, for Secury multiple locking devices Steel Continuously adjustable For DIN left hand and DIN right hand use 4 mm 20 mm Area of application: For Secury multiple locking devices, for rebated wooden doors Steel For forend: 20 mm Rebate gap: 4 mm Dimension Y: 13 mm With exchange component, concealed and adjustable by 3 mm Finish Dowel Locking wedge ferguard*silver Finish DIN left hand DIN right hand ferguard*silver DK 107

26 Dialock Electric Strikes For exterior and interior doors Dialock electronic locking systemdialock Electric StrikesFor exterior and interior doorsprices Availability OrderingPlanning, Construction StarTec Electric strike Dialock electronic locking systemelectric strikefor exterior and interior doorsprices Availability OrderingPlanning, Construction StarTec Flat striking plate Area of application: For installation in striking plate Housing and latch: Zinc alloy Operating current function, with adjustable latch Voltage: 6 12 V AC/DC Voltage tolerance: ±15 % Electric strike Mounting For DIN left hand and DIN right hand use Supplied with 1 Electric strike 1 Set of fixing material (striking plate screws M4 x 8) Area of application: 24 For wooden or metal door frames, for rebated doors 3 Dialock electronic locking systemdialock Electric strikefor exterior and interior doorsprices Availability OrderingPlanning, Construction StarTec Angled striking plate Material Finish Mounting Stainless Matt For DIN left hand and steel DIN right hand use Area of application: For wooden frames, for rebated doors Material Finish Mounting Stainless steel (quality ) Matt DIN left hand DIN right hand DK 108

27 Dialock Electric Strikes For exterior and interior doors Dialock electronic locking systemdialock StrikesFor exterior and interior doorsprices Availability OrderingPlanning, Construction Electric strike 1 model Dialock electronic locking systemdialock strikefor exterior and interior doorsprices Availability OrderingPlanning, Construction Electric safety strike model FaFix/A01 Area of application: For installation in striking plate, suitable for Dialock electronic locking system With permanent operation (on-period 100 %), with regenerative diode, operating current function, Fafix version with 4 mm interval adjustment, with feedback (without Fafix) Housing: Zinc alloy, latch: Brass Finish: Latch: Nickel plated Technical data Power supply 12 V DC Voltage tolerance V DC Direct current consumption 0.2 A Resistance 60 Ω On-period 100 % Note Only to be used with DC power supply units. Mounting Model DIN left hand DIN right hand Order reference Fixing material (striking plate screws M4 x 8) supplied. Area of application: Suitable for equipping and retro-fitting of fire resistant doors, for wooden or metal doors, suitable for Dialock electronic locking system With permanent operation (on-period 100 %), with regenerative diode, operating current function, Fafix version with 4 mm interval adjustment Housing: Stainless steel Finish: Installation: Technical data Housing: Matt Surface-mounted housing for installation in door frame Power supply 12 V DC Voltage tolerance V DC Direct current consumption 0.29 A Resistance 42 Ω On-period 100 % Note Only to be used with DC power supply units. Mounting Model For DIN left hand and DIN right hand use FaFix/A DK 109

28 Dialock Electric Strikes For all-glass doors Dialock electronic locking systemdialock StrikesFor all-glass doorsprices Availability OrderingPlanning, Construction Electric strike model Dialock electronic locking systemdialock strikefor all-glass doorsprices Availability OrderingPlanning, Construction Electric safety strike model FaFix/A01/A04 Area of application: To suit glass 12 mm thick, suitable for Dialock electronic locking system With permanent operation (on-period 100 %), with regenerative diode, operating current function Electric strike latch: Brass Finish: Housing: Grey lacquered, electric strike latch: Nickel plated Mounting: For DIN left hand and DIN right hand use Technical data Power supply 12 V DC Voltage tolerance V DC Direct current consumption 0.2 A Resistance 60 Ω On-period 100 % Note Only to be used with DC power supply units. Mounting Model For DIN left hand and DIN right hand use Area of application: Suitable for equipping and retro-fitting of fire resistant doors, suitable for Dialock electronic locking system With permanent operation (on-period 100 %), with regenerative diode, operating current function, Fafix version with 4 mm interval adjustment Housing and counter plate: Stainless steel Finish: Installation: Technical data Note Only to be used with DC power supply units. Housing and counter plate: Matt Surface-mounted housing for installation in door frame, counter piece and counter plate are glued (e.g. two-component adhesive with minimum tensile strength of 30 N/cm 2 for glass/metal connection) Power supply 12 V DC Voltage tolerance V DC Direct current consumption 0.29 A Resistance 42 Ω On-period 100 % Mounting Model For DIN left hand and DIN right hand use FaFix/A01/A DK 110

29 Dialock Electric Strikes For fire resistant doors Dialock electronic locking systemdialock StrikesFor fire resistant doorsprices Availability OrderingPlanning, Construction Electric strike model 111U Area of application: Suitable for installation in smoke control doors and access control systems Housing, latch and screw-on part: Zinc alloy Operating current function, with radius latch, with adjustable and fixable Fafix latch, with interference protection by suppressor diode Voltage: 22 42V AC/DC Direct current input: At 24 V: 0.14 A with DC operation, 0.24 A with AC operation Resistance: 172 Ω Mounting Model For DIN left hand and 111U DIN right hand use Supplied with 1 Electric strike 1 Set of fixing material (striking plate screws M4 x 8) DK 111

30 Dialock Accessories For electric strikes Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Current transmitter models 10305, Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Taper contact model Model Model Area of application: For wooden frames Housing: Metal Installation: For recess mounting in door frame Adjusting facility: 13 mm Contact voltage: <25 V Switching current: <1.0 A Response distance approx. 1 mm Model Taper contact Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Magnetic contact model Model Area of application: Finish: Contact voltage: Switching current: On-period/pause-period <10 sec/>40 sec Distance between contact blocks <5 mm For current transfer from door frame to door Contact pins: Brass, housing: Plastic Contact pins: Nickel plated, housing: Plastic white Screw terminal for cable <24 V <1.5 A with electric strike connection (snap action switch) Connection Model 2-pin pin Area of application: For steel door frames Housing: Plastic Finish: Housing: White, similar to RAL 9002 Contact voltage: <24 V Switching current: <0.1 A Ohm resistive load Length: Connecting cable 6 m Switching distance approx. 10 mm Model Magnetic contact DK 112

31 Dialock Accessories For electric strikes Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Magnetic contact model Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Bolt switching contact model Housing: Plastic Finish: Housing: White, similar to RAL 9002 Contact voltage: <24 V Switching current: <0.1 A Ohm resistive load Length: Connecting cable 6 m Switching distance approx. 20 mm Model Magnetic contact Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Bolt switching contact model 878 Installation: Contact voltage: Switching current: Length: Contact travel <18 mm Response distance approx. 4 mm Function Switches when the lock bolt is extending. Housing: Zinc alloy With M4 screws, installation behind existing striking plate, minimum dimension for bolt throw = response distance of bolt switching contact + air gap Change-over contact, waterproof <25 V <1.5 A Connecting cable 4 m Installation: Contact voltage: Switching current: Length: Unlimited contact travel Response distance approx. 3 mm Housing: Zinc alloy Behind existing striking plate or metal door frame Change-over contact, waterproof <25 V <1.5 A Connecting cable 4 m Function Switches when the lock bolt is extending. Model Bolt switching contact Model Bolt switching contact DK 113

32 Dialock Accessories For electric strikes Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Cable transition model Dialock electronic locking systemdialock AccessoriesElectric strike accessoriesprices Availability OrderingPlanning, Construction Safety transformer Area of application: Installation: Length: For current transfer from door frame to door for Ø 7 mm cable, suitable for installation in wooden, plastic or metal doors Screw-on holder and hose: Stainless steel Concealed, optional in door frame or in door leaf Flexible hose <110 mm Suitable for permanent operation, short-circuit proof provided by PTC (resistor) Input voltage: 220 V AC Output voltage: Width 36 mm: Alternating current 8 V, width 54 mm: Alternating current 8/12 V Output current: 2 A Installation: Installation in flush distributor: Width 36 mm: 2 ju, width 54 mm: 3 ju, surface mounting is possible with the supplied mounting set Standard: In compliance with EN 60742/9.95, VDE 0551, DIN Dimensions (D x H): 50 x 90 mm Note Nominal secondary voltage only occurs with nominal current. No-load voltage lies up to 50 % above nominal voltage. Note Please order mounting set for installation in wood separately. Model Cable transition Mounting set for wooden doors Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction Cable transition models 10318, Area of application: For current transfer from door frame to door for pulling flexible cable up to Ø 7 mm through Flexible hose: Rust-proof metal, screw-on holder: Plastic Finish: Screw-on holder: white Installation: Visible Length: Flexible hose: <180 mm with 10318, <300 mm with Model Cable transition Safety transformer Dialock electronic locking systemdialock AccessoriesFor electric strikesprices Availability OrderingPlanning, Construction DC power supply unit Note Not short circuit proof. Width Installation mm 36 2 joint units joint units Unregulated, suitable for permanent operation Input voltage: 230/115 V AC Output voltage: Direct current 12 V Output current: 3 A Temperature range of operation: C Installation: Hat rail installation, 3 joint units Standard: In compliance with EN, VDE, UL, CSA Dimensions (W x D x H): 55 x 110 x 75 mm Installation DC power supply unit 3 joint units DK 114

33 Dialock Profile Cylinders With standard profile Dialock electronic locking systemdialock Profile CylindersWith standard profileprices Availability OrderingPlanning, Construction StarTec Double cylinder With different key changes Dim. A Dim. B Dim. C Nickel Polished mm mm mm plated matt Keyed alike Closure: Locking system: Standard: Note No secured locking Supplied with 1 Double profile cylinder 3 Nickel plated steel keys 1 Fixing screw Cylinder housing: Brass With different key changes, keyed alike S11 or S12 With 5 pin tumblers In compliance with EN 1303 with DIN / Dim. A Dim. B Dim. C S11 S11 S12 mm mm mm Nickel plated matt Polished Nickel plated matt DK 115

34 Dialock Profile Cylinders With standard profile Dialock electronic locking systemdialock Profile CylindersWith standard profileprices Availability OrderingPlanning, Construction StarTec Single cylinder With different key changes Dim. A Dim. B Dim. C Nickel Polished mm mm mm plated matt Keyed alike Dim. A Dim. B Dim. C S11 S11 S12 mm mm mm Nickel plated matt Polished Nickel plated matt Closure: Locking system: Standard: Note No secured locking. Supplied with 1 Single profile cylinder 3 Nickel plated steel keys 1 Fixing screw Cylinder housing: Brass With different key changes, keyed alike S11 or S12 With 5 pin tumblers Follower adjustable to 12 positions In compliance with EN 1303 with DIN / DK 116

35 Dialock Profile Cylinders As protected individual locking Dialock electronic locking systemdialock Profile CylindersAs protected individual lockingprices Availability OrderingPlanning, Construction Double cylinder model 810 Dialock electronic locking systemdialock Profile cylindersas protected individual lockingprices Availability OrderingPlanning, Construction Single model 851 ½ Finish: Locking system: Standard: Cylinder housing: Brass Cylinder housing: Nickel plated matt, glass-bead blasted With 5 pin tumblers each locking side Anti-pick protection provided by particularly refined housing pins providing effective protection against lock picking tools, approved drilling and pull protection in compliance with VdS with RE (optional also with SP) In compliance with EN 1303 with DIN / Finish: Locking system: Standard: Cylinder housing: Brass Cylinder housing: Nickel plated matt, glass-bead blasted With 5 pin tumblers Anti-pick protection provided by particularly refined housing pins providing effective protection against lock picking tools, approved drilling and pull protection in compliance with VdS with RE (optional also with SP) In compliance with EN 1303 with DIN / Basic lengths Dimension A mm Dimension B mm Dimension C mm Dimension A = external length of cylinder Dimension B = internal length of cylinder Note The security pass protects against unauthorized re-ordering of cylinders and keys. It contains name and code of locking system and locking cylinder and must be provided as legitimation when re-ordering. System Supplied with SP 1 Double profile cylinder New silver keys 1 Fixing screw 1 CES security pass 1 Locking plan RE 1 Double profile cylinder 5 New silver keys including purse key 1 Fixing screw 1 CES security pass 1 Locking plan Order reference Please specify dimension A and dimension B when ordering. Available finishes: Matt nickel plated, polished chrome plated, matt chrome plated, polished or matt brushed. Basic lengths are without surcharge. Basic lengths Dimension A mm Dimension B mm Dimension C mm Dimension A = external length of cylinder Dimension B = internal length of cylinder Note The security pass protects against unauthorized re-ordering of cylinders and keys. It contains name and code of locking system and locking cylinder and must be provided as legitimation when re-ordering. System Supplied with SP 1 Single profile cylinder New silver keys 1 Fixing screw 1 CES security pass 1 Locking plan RE 1 Single profile cylinder 5 New silver keys including purse key 1 Fixing screw 1 CES security pass 1 Locking plan Order reference Please specify dimension A and dimension B when ordering. Available finishes: Matt nickel plated, polished chrome plated, matt chrome plated, polished or matt brushed. Basic lengths are without surcharge. DK 117