Aircraft Philipp. For manufacturers of aircraft engines and gas turbines. Every flight a part of us.
|
|
- Warren Pierce
- 5 years ago
- Views:
Transcription
1 Aircraft Philipp For manufacturers of aircraft engines and gas turbines Every flight a part of us.
2 2 Toni Liedl Rolf Philipp Timm Dinges Tilmann Rosch Heinz Bähr
3 THE AIRCRAFT PHILIPP GROUP Who we are The Aircraft Philipp Group is an owner-operated, medium-sized group of companies located at three sites in Germany. With 45 years of experience in manufacturing precision parts for the aerospace industry, we share a long-term partnership with our customers that is shaped by mutual confidence. If it comes to quality, precision, flexibility and innovation, our customers from the aerospace sector, chemical industry, mechanical engineering, medical engineering and semiconductor technology have their high-quality single and serial parts as well as complete assemblies produced by the Aircraft Philipp Group. Our strenghts is the machining of all common aerospace materials from aluminium and titanium up to high grade nickel based alloys like e.g. inconel, hastelloy, waspalloy, etc. We take pride in the fact that our parts are used in almost every project of worldwide aviation. 3
4 6 / 7 CAD / Cam 8 / 9 Milling / turning of small parts 10 / 11 Rings 12 / 13 casings 14 / / / / 21 disks / shafts Fans, Blisks, Impeller, blades non destructive testing assemblies 22 / 23 Quality assurance 24 / 25 Quality management 26 / 27 References 4
5 Supply chain Management Procurement - Production - Logistics Being a One Stop Shop for machining and component assembly for the international aerospace industry, we cover the complete process chain from the purchasing of raw materials and production to special processes. The decisive factor of success for the Aircraft Philipp Group is the optimization of corporate processes and the successful integration and coordination of our worldwide supply chain. This capability is permanently enhanced and further-developed. It enables us to guarantee that your special requirements are sustainably implemented on a high level of quality. 5
6 6
7 CAD / CAM NC Programming Our manufacturing engineers generate process reliable NC programmes using the CAD / CAM Systems CATIA V5, Hypermill 5 Axis and NCL. We program parts of different size and complexity on various vertical and horizontal milling and turning centres. The test times at the machines are reduced through the use of the machine simulation software Vericut. Our experience with our in-house production lines up perfectly with the many years of practice in the field of CAD/ CAM service. Here, we employ NC programmers in the production of our customers worldwide. Owing to the high quality of our NC programmes and the outstanding flexibility of our employees we have established a very good reputation amongst our customers. The combination of these two business areas and our 20 highly qualified NC programmers enable us to introduce even large work packages into the production within a very short lead time. 7
8 8
9 Series production for manufacturers of AIRCRAFT ENGINES / GAS TURBINES Milling / Turning of small parts 9
10 10
11 Series production for manufacturers of AIRCRAFT ENGINES / GAS TURBINES Rings As a manufacturer of rotating and static rings up to Ø mm (43,3 inch) we support our customers from the prototype phase to process reliable series production. For example, we produce critical and rotating rings for the high-pressure turbine of the MTR390 engine. 11
12 12
13 Single piece production for manufacturers of AIRCRAFT ENGINES / GAS TURBINES Casings Our qualification also includes casings up to a size of mm (43,3 inch). For instance, we machined a split case for the Geared Turbofan (GTF) test rig. 13
14 14
15 Single piece production for manufacturers of AIRCRAFT ENGINES / GAS TURBINES Disks, Shafts We produce disks and shafts primarily as single pieces. Shafts can be machined up to a maximum turning length of mm (118,1 inch). The tie-shaft for a test setup for the Geared Turbofan (GTF) is one example. 15
16 16
17 Single piece production for manufacturers of AIRCRAFT ENGINES / GAS TURBINES Fans, Blisks, Impeller and Blades A special challenge within our customer cooperation are highly complex parts or small series that we produce rapidly during the development phase of new customer projects. Here, we have implemented a titanium fan rotor with a diameter of 820 mm for a test setup. 17
18 18
19 NON DESTRUCTIVE TESTING Fluorescent Penetrant Inspection and Magnetic Particle Inspection In order to be able to supply our customers with ready-to-install components, we have a non destructive testing department using fluorescent penetration and magnetic particle inspection. Several customer certificates like Rolls-Royce Germany, MTU Aero Engines, Liebherr Aerospace, Airbus UK as well as a NADCAP approval stand for our international high level of quality. This service is also offered as a stand-alone service. 19
20 20
21 ASSEMBLIES Ready-to-install components & assemblies The cooperation with approved suppliers (NADCAP, EN/AS 9100) allows us to produce components including surface and heat treatment, flame and plasma spraying as well as TIG and EB welding. For example, we manufacture a static seal ring including a honeycomb seal and subsequent finishing. Assembly work like self-locking threaded inserts, rivets, shoulder pins, etc. is carried out in-house by qualified experts. This allows us to deliver ready-to-install components & assemblies. 21
22 22
23 QUALITY ASSURANCE Coordinate measurement technology, Conductivity measurement, Hardness test, Small measurement equipment Our quality assurance is a fixed part of a successful production process. With our extensive inspection planning we ensure that all components meet the individual customer s requirements from the goods receiving until delivery. It is a matter of course to us to professionally adapt our performance to new customers and to establish the particular customer s requirements within the complete company. Our air-conditioned measurement laboratories and modern measurement equipment guarantees an exact measurement of all parts that are manufactured in our production. With the use of coordinate measurement machines in combination with offline programming on a CAD model we ensure that the amount of time needed for first article inspection can be kept as short as possible. We perform these tests according to the regular aviation standards like EN/AS 9100 / EN/AS For an economic series production, we also employ small measurement tools and perform conductivity measurements, hardness tests as well as surface and coating thickness measurements. 23
24 24
25 QUALITY MANAGEMENT Full scale certification. We regard our quality management system as a core task and most important tool to improve our processes and performances. It fully meets the requirements of EN/AS In addition to EN/AS 9100, we have several customer specific certificates like Rolls-Royce Germany, MTU Aero Engines, Airbus Germany, Airbus UK, RUAG Aerospace, Premium Aerotec, Eurocopter and Pilatus. Our customers confirm regularly that our quality management system is understood and lived actively. We take our commitment towards our environment very seriously. This is evidenced by our certification as per DIN EN ISO
26 26
27 Worldwide References Satisfied customers are the best reference. The large number of international projects are an indicator of our high performance capability and a clear sign of confidence of our customers in a long-standing and successful cooperation. Here are some of our current projects: Military Aviation Airbus A400 M Dassault Rafale Eurofighter Saab Gripen Space flight Ariane 4 Ariane 5 Civil Aviation Airbus A380 Airbus A330 / A340 Airbus A318 / A319 / A320 / A321 Boeing 787 Bombardier CRJ700 / 900 / 1000 Helicopters Eurocopter BO105 Eurocopter NH90 Eurocopter EC145 Eurocopter Tiger Business Aircraft Pilatus PC12 Gulfstream G650 Engines PW300 PW1000G TP400 RB199 MTR390 Larzarc EJ200 Tay GP
28 Aircraft Philipp Ampfing GmbH & Co. KG Wernher-von-Braun-Straße Ampfing, Germany Phone: +49 (0) 8636 / Fax: +49 (0) 8636 / ampfing@aircraft-philipp.com Rolf Philipp President Phone: +49 (0) rolf.philipp@aircraft-philipp.com Toni Liedl Management Uebersee Phone: +49 (0) toni.liedl@aircraft-philipp.com Aircraft Philipp Karlsruhe GmbH Erzberger Straße Karlsruhe, Germany Phone: +49 (0) 721 / Fax: +49 (0) 721 / karlsruhe@aircraft-philipp.com Tilmann Rosch Management Ampfing Phone: +49 (0) tilmann.rosch@aircraft-philipp.com Aircraft Philipp Übersee GmbH & Co. KG Gewerbestraße Übersee, Germany Phone: +49 (0) 8642 / Fax: +49 (0) 8642 / uebersee@aircraft-philipp.com Timm Dinges Management Karlsruhe Phone: +49 (0) timm.dinges@aircraft-philipp.com
Company Presentation
Company Presentation SMF operates mainly in Aerospace fields. SMF has a system of internal rules that allows the Company to meet all requirements that are the characteristics of this peculiar sector.
More informationOver 100 Years of History
IT1903 Over 100 Years of History AND AEROSPACE TECHNOLOGY www.secondomona.com 1903 We started together Over 100 years OF SUCCESSFUL HISTORY 1903 Founded by Mr. Secondo Mona in Somma Lombardo, Italy 1913
More informationCommitted to the mission. Military engine programs
Committed to the mission Military engine programs Germany s number one engine manufacturer MTU Aero Engines is Germany s leading engine manufacturer and a key player in the industry both in Germany and
More informationBall Screws for Aerospace Applications. Built-to-print Built-to-spec Engineering services
Ball Screws for Aerospace Applications. Built-to-print Built-to-spec Engineering services Ball Screws for Aerospace Applications. Steinmeyer develops customized solutions for many applications in the aerospace
More informationNumber one in Germany Partners down the road Leaders in engineering and service
Engine programs MTU Aero Engines Number one in Germany MTU Aero Engines is Germany s leading engine manufacturer and ranks among the global players in the industry. It designs, develops, manufactures,
More informationFrom aviation pioneer to partner in the global engine community
Engine programs From aviation pioneer to partner in the global engine community In the aviation industry, three simple letters stand for top-notch engine technology: MTU has been providing propulsion
More informationIntelligent Balancing Solutions
Intelligent Balancing Solutions Smooth running brought to the point. Measuring and Balancing Technologies from Hofmann In every vehicle on the road, on rails, in the air, and on water a large number of
More informationJuly Turbomeca Safety Initiatives
July 2009 Turbomeca Safety Initiatives World leader in its market Number one in 2008 An international company on a global scale World leader for helicopter turbines Turbomeca 44% All sectors Rolls-Royce
More informationInvestor Update - Paris Defence Aerospace Axel Arendt
Investor Update - Paris 2009 Defence Aerospace Axel Arendt 2009 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied or communicated to a third party,
More informationMTU Aero Engines Lifetime Excellence. July 2018
MTU Aero Engines Lifetime Excellence Agenda Our 1 environment Our 2 track record Our 3 expertise Your 4 questions 46,000 Aircrafts The globally active fleet of 23,000 aircrafts will double by 2036. Less
More informationSchaeffler Global Technology Network. Together we move the world
Schaeffler Global Technology Network Together we move the world Working together to turn challenges into opportunities Globalization opens up limitless opportunities for companies while at the same time
More informationPower Converter Products. For Naval, Aviation and Land Applications
Power Converter Products For Naval, Aviation and Land Applications Power Converter Products for Naval, Aviation and Land Applications Naval Today, advanced electronic power supply equipment supports critical
More informationdrive is what matters
drive is what matters www.pmdm.de PM DM driven by motion PM DM Specialized in modern motor systems, Precision Motors Deutsche Minebea GmbH (PM DM) designs and produces motor systems for computer hard drives
More informationMTU Maintenance Zhuhai. The passion for perfection. MTU Maintenance Zhuhai An MTU Aero Engines Company
MTU Maintenance Zhuhai The passion for perfection MTU Maintenance Zhuhai An MTU Aero Engines Company MTU_Standort_Brosch_Zhuhai_2009_01.qxd Center of excellence in Asia 13.11.2009 14:02 Uhr Seite 2 MTU
More informationThe Company. Munich, 2017
The Company Munich, 2017 Agenda The company Aviation and engine market MTU s know-how Business segments Financials Corporate responsibility Agenda The company Aviation and engine market MTU s know-how
More informationBild : Bernhard Mühr German Aerospace Center Flight Operations
German Aerospace Center Flight Operations Bild : Bernhard Mühr www.wolkenatlas.de Introduction DLR is Germany s aerospace research center and space agency with about 4700 employees in 31 research institutes
More informationGreat support for small engines CF34-3, CF34-8, CF MTU Maintenance Berlin-Brandenburg An MTU Aero Engines Company
Great support for small engines CF34-3, CF34-8, CF34-10 MTU Maintenance Berlin-Brandenburg An MTU Aero Engines Company The center of excellence for the entire CF34 engine family MTU Maintenance is the
More informationDMG. Aerospace Industry
www.gildemeister.com DMG innovative technologies DMG Aerospace Industry Complete machining of a compressor housing with a DMC 160 FD duoblock -milling and turning in a single setup. DMG Your High-tech
More informationOVER 30 YEARS SPECIALISED IN AERONAUTICS/ AEROSPACE
OVER 30 YEARS SPECIALISED IN AERONAUTICS/ AEROSPACE SOLUTIONS FOR AERONAUTICS AND AEROSPACE Our company offers customers total machining solutions and specialises in guaranteeing high quality, precision
More informationAcme NonStop Power. for Every Mission
Acme NonStop Power.................................................................................................................. for Every Mission Sealed fiber nickel-cadmium battery and power systems
More informationMotors and Gearboxes for Material Handling. Innovative Energy efficient Reliable
Motors and Gearboxes for Material Handling Innovative Energy efficient Reliable Reliability In All Areas ABM Greiffenberger develops and manufactures cutting edge drive solutions in highest quality. Individual
More informationTAILOR MADE SOLUTIONS. Sitec Aerospace A Worldwide Synergy
TAILOR MADE SOLUTIONS Sitec Aerospace A Worldwide Synergy Company Sitec Aerospace GmbH, a worldwide synergy. Sitec Aerospace GmbH founded 1974 as Sitec-Präzisionstechnik GmbH by Franz Sichart, steadily
More informationElectronic Control Units and Power Electronics for Aerospace Applications
Electronic Control Units and Power Electronics for Aerospace Applications Electronic Control Units and Power Electronics for Aerospace Applications Liebherr-Elektronik GmbH has been a competent partner
More informationALES KREMEN NEW DIRECTION IN AVIATION.
NEW DIRECTION IN AVIATION www.woodcomp.cz PRODUCTION We have 4.500 square meters of our own production facilities and organization, regularly audited and supervised by EASA. All production is handled by
More informationPower Modules to meet your exact Requirements
Power Modules to meet your exact Requirements D A N F O S S S I L I C O N P O W E R About Danfoss Silicon Power Danfoss Silicon Power was founded in August 1998 as a subsidiary of Danfoss and is located
More informationTP400-D6 Turboprop A European Collaboration Programme
TP400-D6 Turboprop A European Collaboration Programme Royal Aeronautical Society Lecture, 19 September 2006 Hamburg Content l Why a Turboprop? l The Engine Team l TP400-D6 Overview l TP400-D6 Validation
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationSAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS
HOW BUSINESS FLIES SAFRAN OVERVIEW PROPULSION Safran Aircraft Engines Safran Nacelles CTRICAL ELECTRICAL POWER Safran Transmission Systems Safran Electrical & Power Safran Power Units Safran Landing Systems
More informationOur Mission. Our Vision
1 2 Company Profile TEI was established in 1985 to assemble F110 engines and manufacture 12 parts of this engine powering the F16 fighters in the Turkish Air Force Inventory; and today, with more than
More informationDavis Aircraft Products Co., Inc. Manufacturing and Production Capabilities
Manufacturing and Production Capabilities FACILITIES 2 Locations totaling over 55,000 sq.ft. Bohemia, Bohemia, NY Headquarters FAA FAA Repair Station & Light Manufacturing 2 The Company Established in
More informationLESJÖFORS. Spring manufacturing since 1852.
LESJÖFORS Spring manufacturing since 1852. Global manufacturer and supplier with the market s widest range of springs, gas springs and stampings and pressings. Complete production system adjusted to customer
More informationMission Critical Metallics. Hunter Dalton, EVP ATI High Performance Specialty Materials Group May 20, ATI. All Rights Reserved.
Mission Critical Metallics Hunter Dalton, EVP ATI High Performance Specialty Materials Group May 20, 2014 2014 ATI. All Rights Reserved. Forward Looking Statements This presentation contains forward-looking
More informationHydraulic Ground Power Unit - Accessories >Hgpu<
Hydraulic Ground Power Unit - Accessories >Hgpu< HYDRAULICS 1. Hydraulic Coupling Kit There are basically two types of Coupling Kits: a) female () b) male (CK...M) a) b) Illustrative example - CK001F Illustrative
More informationSenior AEROSPACE APPLICATIONS ENGINEERED SOLUTIONS FOR AEROSPACE APPLICATIONS ENGINEERED SO
Senior AEROSPACE APPLICATIONS ENGINEERED SOLUTIONS FOR AEROSPACE APPLICATIONS ENGINEERED SO GLOBAL AEROSPACE ENGINEERING Senior is an international manufacturing group with over 5800 employees and operations
More informationThe complete range of engineering solutions to satisfy customer requirements from hardware procurement through to testing and final stripping.
Rig testing The complete range of engineering solutions to satisfy customer requirements from hardware procurement through to testing and final stripping. Customer: order Planning Design of modules/test
More information2018 ANSYS, Inc. ANSYS.COM
Dramatic innovations in electrical systems are underway to increase the energy efficiency of the millions of industrial motors that power fans, pumps and compressors used around the globe. The targeted
More informationENGINEERING CAPABILITIES
GES Engineering is founded in 2013 in Ankara OSTİM Organized Industry. It is active in Aerospace and Defense Industry with precision mechanical production, design and assembly. To satisfy customer needs
More informationSOURCE OF PRECISION.
SOURCE OF PRECISION. Minimal energy consumption, reduced scrap, lowest production costs during the entire life cycle the requirements for plastics processors are continuously rising. Due to increasingly
More informationGround Support Equipment for Helicopters. Maintenance-free Products for ergonomic and frictionless working procedures
Ground Support Equipment for Helicopters Maintenance-free Products for ergonomic and frictionless working procedures LICO - who we are... with over 35 years of experience in design, manufacturing and test
More information87 Jersey St West Babylon, NY (631)
87 Jersey St West Babylon, NY 11704 (631) 253-2377 Who Is Wal Machine? Founded in 1965 Highly Experienced & Dedicated Staff Specializing in Hard Metals Machining (Titanium and Alloy Steels) and Complex
More informationBrush seals. World class sealing technology
Brush seals World class sealing technology MTU brush seal team High-tech from a technology leader The MTU brush seal team is a highly specialized center of expertise of MTU Aero Engines, Germany s leading
More informationINNOVATION POWERING SAFRAN
INNOVATION POWERING SAFRAN Stéphane CUEILLE, Chief Technology Officer 106 Safran - Capital Markets Day / November 29, Technology, key to our competitiveness R&T plan BUSINESSES PROPULSION EQUIPMENT INTERIORS
More informationSAFRAN OVERVIEW 8% OF SALES INVESTED IN R&D. $18.5 BILLION IN SALES generated in 2017 (1) #1 WORLDWIDE AEROSPACE: PROPULSION SYSTEMS
HOW BUSINESS FLIES PROPULSION Safran Aircraft Engines Safran NacellesRICAL ELECTRICAL POWER Safran Transmission Systems Safran Electrical & Power Safran Power Units Safran Landing SystemsAL LANDING AND
More informationPrecision meets innovation custom-made assembly systems
Precision meets innovation custom-made assembly systems bwm line concept bwm assembly lines enable different versions of complex components to be produced, with the option of increasing component variety
More informationD. A. Davidson 7 th Annual Aerospace & Industrials 1-1 Conference Boston, Mass Standex Engineering Technologies Group.
D. A. Davidson 7 th Annual Aerospace & Industrials 1-1 Conference Boston, Mass Standex Engineering Technologies Group December 8, 2015 Company History Spincraft; North Billerica, MA Acquired by Standex
More information87 Jersey St West Babylon, NY (631)
87 Jersey St West Babylon, NY 11704 (631) 253-2377 www.walmachine.com About Wal Machine Founded in 1965 Highly Experienced & Dedicated Staff Specializing in Hard Metals Machining (Titanium and Alloy Steels)
More informationPOWER SUPPLY AND CONTROL TECHNOLOGY
IPS-FEST GmbH Lange Wende 2 4 Tel. +49 (0) 2385 9355-0 info@ips-fest.de D-59069 Hamm Fax +49 (0) 2385 9355-60 www.ips-fest.de POWER SUPPLY AND CONTROL TECHNOLOGY INDUSTRIAL POWER SOLUTIONS - Individual
More informationType Acceptance Report
TAR 17/21B/16 Pratt & Whitney PW1500G/1900G Series Aircraft Certification Unit TABLE OF CONTENTS EXECUTIVE SUMMARY 1 1. INTRODUCTION 1 2. PRODUCT CERTIFICATION DETAILS 1 4. NZCAR 21.43 DATA REQUIREMENTS
More informationReliability is our profession
Reliability is our profession Drive components for wind turbines Siemens AG Am Industriepark 2 46562 Voerde Germany Phone +49 2871 92-4 Fax +49 2871 92-2487 E-Mail info@winergy-group.com www.winergy-group.com
More informationTurbocharging: Key technology for high-performance engines
Engine technology Turbocharging: Key technology for high-performance engines Authors: Dr. Johannes Kech Head of Development Turbocharging Ronald Hegner Team Leader, Design of Turbocharging Systems Tobias
More informationPowering a better world: Rolls-Royce and the environment
Powering a better world: Rolls-Royce and the environment Tony Davis CEO Rolls-Royce Australasia RAeS New Zealand Division Sustainable Aviation Seminar, Wellington 28 March 2008 Rolls-Royce plc Civil Aerospace
More informationͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ
ͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ Do you know the potential and the limits of your products? Your one-stop test laboratory for environmental simulation and EMC Treo is your partner during the process of
More informationGear Drive Solutions a Dedicated and Reliable Partner
Gear Drive Solutions a Dedicated and Reliable Partner /// Gears, spindle gears, actuators, motors etc. /// Flange bearing and pillow block bearing units /// Standard or customized products /// Complete
More informationSubcontracting TEC. Components & subassemblies for electric machines. Electric Components
Subcontracting Components & subassemblies for electric machines TEC Electric Components Complex solutions in outsourcing Independent producer of our own line and supplier of custom made products and services
More informationIrkut Corporation plant is manufacturing fuselage sections and carries out its assembly
MC-21 MC-21 is a perspective commercial aircraft with a capacity of 150 to 211 passengers. Irkut Corporation (a UAC company) is creating the plane within a wide international cooperation First aircraft
More informationMAHLE Industrial Filters. Dust Filter Equipment
MAHLE Industrial Filters Dust Filter Equipment Pioneering systems, modules and components of the highest precision and quality for engines and vehicles as well as for industrial applications that s what
More informationClean Sky Programme. JTI Workshop, Vienna 3 rd of February, Helmut Schwarze, Project Officer CSJU Andrzej Podsadowski, Project Officer CSJU
Clean Sky Programme Helmut Schwarze, Project Officer CSJU Andrzej Podsadowski, Project Officer CSJU JTI Workshop, Vienna 3 rd of February, 2011 1 1 Clean Sky Programme Overview 2 2 Clean Sky Integrated
More informationTechnics and parts by MAANS
Technics and parts by MAANS Grain and corn headers Trailers (with and without balancer) Parts and consumables to agricultural machines Sale of agricultural machines Production Selling Service Repair MAANS,
More informationHELIWORK SERVICES UK APPROVED CAPABILITY MANUAL. Ref: HW/ENG/145/3. Issue 6
HELIWORK SERVICES Ref: HW/ENG/145/3 Issue 6 Dated: 16 October 2013 General INTRODUCTION Section: 0.1 Issue: 6 Rev: 1 Date: 01/06/2016 This Approved Capability Manual Ref HW/ENG/145/3 contains a detailed
More informationDunkermotoren VENETIAN BLIND DRIVES
Dunkermotoren VENETIAN BLIND DRIVES Your Partner for accuracy, compact and high efficient motion solutions. Synergy effects through:» Quick availability of samples and prototypes» Qualified systems for
More informationSuccess made in Germany
RESOL Your partner for solar thermal and control technology since 1977 RESOL has more than 100 employees RESOL products control over 3 million systems in more than 60 countries Success made in Germany
More informationCONFERENCE ON AVIATION AND ALTERNATIVE FUELS
CAAF/09-IP/11 19/10/09 English only CONFERENCE ON AVIATION AND ALTERNATIVE FUELS Rio de Janeiro, Brazil, 16 to 18 November 2009 Agenda Item 1: Environmental sustainability and interdependencies IMPACT
More informationRadiPac EC radial impellers Perfection in air handling
RadiPac EC radial impellers Perfection in air handling The engineer s choice One-stop shopping A coherent concept RadiPac stands for... Real Information - The performance documentation for the entire fan,
More informationVDL Groep. Strength through Co-operation. VDL Defence Technologies
VDL Groep Strength through Co-operation VDL Defence Technologies Contents VDL Groep Benefits from offset with RUAG Defence VDL Defence Technologies 3 6 juni 2012 VDL Defence Technologies VDL Groep Establishment
More informationInvestor Relations News
Investor Relations News Financial year 2017: MTU Aero Engines AG once again posts record figures Earnings forecast for 2017 fully met Outlook for 2018: Moderate earnings increase, cash conversion rate
More informationTurbocompressors Volumetric flow rate: m 3 /min DYNAMIC
www.almig.de Turbocompressors Volumetric flow rate: 25 350 m 3 /min DYNAMIC 2 INTELLIGENTE DRUCKLUFT MADE IN GERMANY ALMiG Kompressoren GmbH A name that guarantees top-grade technology in the compressed
More informationInfinite variety needs limitless creativity. CellPac PLUS Your individual battery design service.
Infinite variety needs limitless creativity. CellPac PLUS Your individual battery design service. www.varta-storage.com CELLPAC PLUS PAGE 3 CELLPAC PLUS PAGE 2 YOUR BATTERY, PRECISELY. FULLY LOADED EXPERTISE.
More informationReady for Takeoff. Leading the Way in Military and Commercial Fixed Wing Aircraft AEROSPACE & DEFENSE
AEROSPACE & DEFENSE Leading the Way in Military and Commercial Fixed Wing Aircraft Ready for Takeoff. Airplanes take to the skies nearly 80 million times each year, carrying five billion passengers and
More informationEngines for Green Aviation s Future
Engines for Green Aviation s Future Alan Epstein Vice President, Technology & Environment Pratt & Whitney EcoAviation Washington, June 2010 Evolution in By-Pass Ratio, Efficiency, & Noise Turbojets Turbofans
More informationBrochure, Flight control and actuation systems EN ver. 1, June 2016
www.saab.com Brochure, Flight control and actuation systems EN ver. 1, June 2016 FLIGHT CONTROL AND ACTUATION SYSTEMS SAFETY ASSURED FLIGHT CONTROL AND ACTUATION SYSTEMS > RELIABLE PRODUCTS RELIABLE PRODUCTS
More informationAdditive Manufacturing at MTU
Additive Manufacturing at MTU 2 nd Munich Technology Conference on Additive Manufacturing 10/10/2018 - Lars Wagner, COO MTU Aero Engines Proprietary Notice This document contains proprietary information
More informationVEHICLE COMPONENTS SUPPLY EXPERTS
VEHICLE COMPONENTS SUPPLY EXPERTS VEHICLE COMPONENTS We build and maintain the strong supply chain links which power the global automotive industry. API Engineering have more than 15 years of experience
More informationCentrifugal fan with highly efficient EC drive motor
Centrifugal fan with highly efficient EC drive motor simple and safe application and installation 2 Why HLU? 90 years of experience in the plastics processing market More than 10.000 m² production in Germany
More informationType Acceptance Report
TAR 17/21B/13 IAE PW1100G-JM/PW1400G-JM Series Aircraft Certification Unit TABLE OF CONTENTS EXECUTIVE SUMMARY 1 1. INTRODUCTION 1 2. PRODUCT CERTIFICATION DETAILS 1 4. NZCAR 21.43 DATA REQUIREMENTS 3
More informationMotors- Basic principles. Expertise, performance, innovation
Motors- Basic principles Expertise, performance, innovation As a leading supplier of ventilation and drive engineering technology, ebm-papst is a highly respected engineering partner in many industries.
More informationElectric motors, generators and gears for rail cars. INNOVATIVE. INDEPENDENT. IMPASSIONED.
Electric motors, generators and gears for rail cars. INNOVATIVE. INDEPENDENT. IMPASSIONED. 20 years ago, people thought that the electric motor had reached its limit. But technological development never
More informationScrew compressors. Volumetric flow rate: m 3 /min acfm
Screw compressors Volumetric flow rate: 0.43 43.07 m 3 /min 20 1550 acfm 2 We have the right product for almost any application! ALMiG Kompressoren GmbH A name that guarantees top-grade technology in the
More informationCase Report Conformal cooling using the example of a core for a die-casting mold insert 3D printing in tool construction and die-casting
Case Report Conformal cooling using the example of a core for a die-casting mold insert 3D printing in tool construction and die-casting Optimizing tool construction and die-casting processes at Oskar
More informationBreakthrough Sensing Technology
Breakthrough Sensing Technology Sensors Switches Hydra-Electric s sensors and switches have been put to the test across a wide range of critical aircraft systems. Flight Control APU (actuators, rudder,
More informationDefence and Security Innovation
Defence Defence and and Security Security Defence and Security Innovation Providing the power to detect, deceive, defend, defeat teledyne-e2v.com/rf Page 1 Introduction ABOUT US Founded in 1947, Teledyne
More informationTURBOCOMPRESSORS Volumetric flow rate: m 3 /min DYNAMIC
www.almig.de TURBOCOMPRESSORS Volumetric flow rate: 11.5 180 m 3 /min 2 INTELLIGENTE DRUCKLUFT MADE IN GERMANY ALMiG Kompressoren GmbH a name that guarantees top-grade technology in the compressed air
More informationPropeller Blade Bearings for Aircraft Open Rotor Engine
NTN TECHNICAL REVIEW No.84(2016) [ New Product ] Guillaume LEFORT* The Propeller Blade Bearings for Open Rotor Engine SAGE2 were developed by NTN-SNR in the frame of the Clean Sky aerospace programme.
More informationPower and Distribution Transformers
Power and Distribution Transformers VRT Power Ltd. We Enable Energy VRT is a modern manufacturer for high-performance oil-immersed power transformers up to 800 MVA 500 kv. Customized design and the development
More informationHORIZON 2020 The European Union's programme for Research and Innovation Open to the world!
歓迎 かんげい HORIZON 2020 The European Union's programme for Research and Innovation Open to the world! Aviation Unit European Commission DG Research & Innovation Horizon 2020 Aviation R&I WHAT is? Horizon2020
More informationClean Sky Challenges and perspectives
Clean Sky Challenges and perspectives EUCASS, Munich, July 3rd, 2013 Eric Dautriat Clean Sky today: Unique Public-Private-Partnership in Aeronautics Focused on environmental goals: CO2, noise, Nox Europe
More informationAdress: Anadolu OSB 4/A, Ankara Phone: Fax: Web: Mail:
Adress: Anadolu OSB 4/A, Ankara Phone: +90 312 354 40 99 Fax: +90 312 354 40 93 Web: www.gesmuhendislik.com Mail: info@gesmuhendislik.com GES Engineering founded in 2013 in Ankara OSTİM Organized Industry.
More informationTel.: +49 (0) /
www.dreiling-maschinenbau.com Tel.: +49 (0) 36084 / 840-1100 Email: info@dreiling-maschinenbau.com ry The Company Maschinenbau Company profile Production- and assembly halls ry Electronic Department Welding
More informationDunkermotoren SOLAR WIND POWER
Dunkermotoren SOLAR WIND POWER Your Partner for accuracy, compact and high efficient motion solutions. Synergy effects through:» Quick availability of samples and prototypes» Qualified systems for your
More informationGerman Aerospace Center Flight Operations
German Aerospace Center Flight Operations Introduction DLR is Germany s aerospace research center and space agency with about 4700 employees in 31 research institutes distributed over 8 main research centers
More informationPresented by Darrell A. Drake Director, Strategic Development
Presented by Darrell A. Drake Director, Strategic Development Company Overview Globally recognized provider of inventory management solutions: 24 year history 288 employees worldwide Core Competencies:
More informationEnvironmentally friendly aero-engines for the 21st century Dr. Norbert Arndt, Managing Director Engineering Rolls-Royce Deutschland
Environmentally friendly aero-engines for the 21st century Dr. Norbert Arndt, Managing Director Engineering Rolls-Royce Deutschland CEAS Berlin, 12 th September 2007 Content ACARE goals & physical boundaries
More informationEMERGENCY ALERT SERVICE BULLETIN
EMERGENCY ALERT SERVICE BULLETIN SUBJECT: MAIN ROTOR DRIVE - Epicyclic module Replacement of the epicyclic module second stage planet gears For the attention of HELICOPTER(S) NUMBER CONCERNED Civil AS332
More informationInnovation Takes Off. Not legally binding
Innovation Takes Off How to finance project under the Clean Sky 2 Joint Undertaking Antonio VECCHIO, Clean Sky 2 JU Lampoldshausen, 15-16 September 2015 Innovation Takes Off 2 Addressing the H2020 Challenges
More informationoil-free, Water-InJected ScreW compressors Volumetric flow rate: m 3 /min acfm
www.almig.de oil-free, Water-InJected ScreW compressors Volumetric flow rate: 0.86 12.46 m 3 /min 36 440 acfm 2 IntellIgente druckluft Made In germany almig Kompressoren gmbh A name that guarantees top-grade
More informationPlay it safe Connectors Switches Contactors. New Energy. Special Switchgear Solutions
Play it safe Connectors Switches Contactors New Energy Special Switchgear Solutions The future is sustainability Sustainability and the green spirit are our inspiration: As a globally-operating company
More informationBizJet International Sales & Support, Inc. FAA Certificated Repair Station Number IY2R915K CAPABILITY LIST. Revision Number: 38
BizJet International Sales and Support, Inc. FAA Certificated Repair Station Number IY2R915K CAPABILITY LIST Revision Number: 38 Current Revision Date: 26 July 2017 BizJet International Sales & Support,
More informationbenteler steel/tube customized tube solutions Individual Precise High-quality
benteler steel/tube customized tube solutions Individual Precise High-quality 2 3 For almost one century, we have been developing and selling steel that not only offer quality and precision but also comply
More informationOIL-FREE, WATER-INJECTED SCREW COMPRESSORS Volumetric flow rate: m 3 /min acfm
www.almig.de OIL-FREE, WATER-INJECTED SCREW COMPRESSORS Volumetric flow rate: 0.86 19.62 m 3 /min 36 693 acfm 2 INTELLIGENTE DRUCKLUFT MADE IN GERMANY ALMiG Kompressoren GmbH A name that guarantees top-grade
More informationTest before take off. Special development competence for your aviation and aerospace products
Test before take off Special development competence for your aviation and aerospace products IMA GmbH Dresden, Germany I www.ima-dresden.de I November 2009 I 1 At the forefront Scarcely any other system
More informationHow do things run smoothly even in rough winds?
How do things run smoothly even in rough winds? Rotor blade inspection during production and ongoing operation Rotor blade quality essential for energy yield Rotor blades must satisfy the most stringent
More information