SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Harry Townsend
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope Amdt Amended to update referenced standards, and to move reference to South African legislation in the text to the foreword. Foreword This South African standard was approved by National Committee SABS/TC 1018/SC 1018A, Petroleum products, biofuels and lubricants Fuels, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in January This document supersedes (edition 2). A vertical line in the margin shows where the text has been technically modified by amendment No. 1. Reference is made in 4.5 to the "relevant national department". In South Africa, this means the South African Revenue Service (SARS). Amdt 1 Annex A is for information only.
3 Contents Page Foreword 1 Scope Normative references Definitions and abbreviations Requirements General Burning quality Applicable requirements and related test methods Storage stability Markers Sampling Precision and dispute Logistics requirements Packing and transport Classification and labelling Storage equipment for kerosene... 9 Annex A (informative) Quality verification of kerosene for domestic use Bibliography
4 This page is intentionally left blank 2
5 Kerosene for domestic heating and illuminating 1 Scope This standard specifies the requirements for a hydrocarbon fuel suitable for use in wick-fed, pressure vaporizing and other kerosene burning appliances for space heating, cooking and illumination. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Information on currently valid national and international standards can be obtained from the SABS Standards Division. ASTM D56, Standard test method for flash point by tag closed cup tester. ASTM D86, Standard test method for distillation of petroleum products at atmospheric pressure. ASTM D130, Standard test method for corrosiveness to copper from petroleum products by copper strip test. ASTM D156, Standard test method for Saybolt color of petroleum products (Saybolt chromometer method). ASTM D187, Standard test method for burning quality of kerosine. ASTM D1266, Standard test method for sulfur in petroleum products (Lamp method). ASTM D1322, Standard test method for smoke point of kerosine and aviation turbine fuel. ASTM D2622, Standard test method for sulfur in petroleum products by wavelength dispersive x-ray fluorescence spectrometry. ASTM D3227, Standard test method for (Thiol Mercaptan) sulfur in gasoline, kerosine, aviation turbine, and distillate fuels (Potentiometric method). ASTM D3244, Standard practice for utilization of test data to determine conformance with specifications. ASTM D4057, Standard practice for manual sampling of petroleum and petroleum products. ASTM D4177, Standard practice for automatic sampling of petroleum and petroleum products. 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31203-9 SOUTH AFRICAN NATIONAL STANDARD Traffic lights WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32599-2 SOUTH AFRICAN NATIONAL STANDARD Electrical security installations Part 3: Electric fences (non-lethal) and manufacture requirements WARNING This document references other documents
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28761-0 SOUTH AFRICAN NATIONAL STANDARD Earthing of low-voltage (LV) distribution systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32159-8 Any reference to SABS 1551-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Check valves (flanged and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29010-8 SOUTH AFRICAN NATIONAL STANDARD Homologation of motor vehicle models Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32948-8 SOUTH AFRICAN NATIONAL STANDARD Petroleum jelly (petrolatum) WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33678-3 SANS 1239:2004 Any reference to SABS 1239 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21023-6 Any reference to SABS 0241 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Tachograph centres Installation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24538-2 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Design, construction, testing, approval and maintenance of road vehicles and portable tanks WARNING: Can only be read
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34898-4 SOUTH AFRICAN NATIONAL STANDARD Motor vehicle tyres and rims Dimensions and loads Part 1: General WARNING This document references other documents normatively. Published by the South
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
SOUTH AFRICAN NATIONAL STANDARD
ICS 43020 ISBN 0-626-17429-5 Edition 11 Any reference to SABS 0319 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The registration
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-17643-3 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 3: Lifts for persons with Amdt 3 disabilities (stairlifting platforms) Published by Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
SOUTH AFRICAN NATIONAL STANDARD. Plug and socket-outlet systems for household and similar purposes for use in South Africa
ISBN 978-0-626-27016-2 SANS 164-1:2012 SOUTH AFRICAN NATIONAL STANDARD Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system, 16 A 250 V
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23643-4 SOUTH AFRICAN NATIONAL STANDARD The testing of motor vehicles for roadworthiness WARNING This standard can only be used in conjunction with the relevant national legislation (see
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22612-1 SANS 20013-H:2009 Edition 2 and ECE amdt 1 ECE R13-H:2008 Revision 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Uniform provisions concerning the approval of passenger cars with
SOUTH AFRICAN NATIONAL STANDARD
ICS 23.020.10; 75.200 ISBN 0-626-15187-2 SOUTH AFRICAN NATIONAL STANDARD Above-ground storage tanks for petroleum products Published by Standards South Africa 1 dr lategan road groenkloof! private bag
SOUTH AFRICAN NATIONAL STANDARD
ICS 4304040 ISBN 0-626-17644-1 Any reference to SABS SV 1051-1 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Motor vehicle
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-2-3382-8 Edition 3.2 and IEC corr. 1 IEC 0309-1:2012 Edition.2 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets and couplers for industrial purposes This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33757-5 Edition 4.1 IEC 60269-2:2016 Edition 5.1 SOUTH AFRICAN NATIONAL STANDARD Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorised persons (fuses mainly
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31092-9 IEC 62485-3:2014 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for secondary batteries and battery installations Part 3: Traction batteries This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29978-1 IEC 60079-17:2013 SOUTH AFRICAN NATIONAL STANDARD Explosive atmospheres Part 17: Electrical installations inspection and maintenance This national standard is the identical implementation
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28543-2 Edition 2.1 and IEC corr. 1 IEC 62271-100:2012 Edition 2.1 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD High-voltage switchgear and controlgear This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27311-8 SANS 1332:2013 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Accessories for medium-voltage XLPE and impregnated paper-insulated power cables (3,8/6,6 kv to 19/33 kv) This national standard
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
EAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE
Document number 022/SANS 1496 Reference SANS 1496 DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE Date of circulation 2017-09-14 Closing date 2017-11-15 Number and title: SANS 1496:XXXX Wheel
Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells (SOFC)
ISBN 978-0-626-30629-8 IEC TS 62282-7-2:2014 SABS STANDARDS DIVISION Technical specification Fuel cell technologies Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18502-5 SANS 60335-2-76:2006 IEC 60335-2-76:2006 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
SOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
DRAFT EAST AFRICAN STANDARD
ICS 75.160.20 DRAFT EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY EAC 2018 Third Edition 2018 Copyright notice This EAC document is copyright-protected
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
ISO INTERNATIONAL STANDARD. Gas turbines Procurement Part 3: Design requirements
INTERNATIONAL STANDARD ISO 3977-3 Second edition 2004-08-15 Gas turbines Procurement Part 3: Design requirements Turbines à gaz Spécifications pour l'acquisition Partie 3: Exigences de conception Reference
ISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16861 First edition 2015-05-15 Petroleum products Fuels (class F) Specifications of dimethyl ether (DME) Produits pétroliers Combustibles (classe F) Spécifications du diméthyléther
Australian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES. ooooooooooooooooooooo
ISSUED FOR COMMENTS ONLY oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo FINAL DRAFT BELIZE STANDARD SPECIFICATION FOR UNLEADED GASOLINE FOR MOTOR VEHICLES ooooooooooooooooooooo
SOUTH AFRICAN NATIONAL STANDARD
ICS 75.160.20 ISBN 0-626-17621-2 SANS 465:2005 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS DEAS 158 Third Edition 2019-mm-dd Automotive gasoline (premium motor spirit) Specification PUBLIC REVIEW DRAFT Reference number DUS DEAS 158: 2019 UNBS 2019 DUS DEAS 158: 2019
Australian/New Zealand Standard
AS/NZS 10542.1:2009 AS/NZS 10542.1:2009 Australian/New Zealand Standard Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-2 Second edition 2008-04-15 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 23671 Second edition 2015-09-01 Passenger car tyres Method for measuring relative wet grip performance Loaded new tyres Pneumatiques pour voitures particulières Méthode de mesure
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites
ISO 8754 INTERNATIONAL STANDARD. Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 8754 Second edition 2003-07-15 Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-1 Second edition 2016-04-01 Road vehicles Circuit breakers Part 1: Definitions and general test requirements Véhicules routiers Coupe-circuits Partie 1: Définitions et
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14635-3 First edition 2005-09-15 Gears FZG test procedures Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
ISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method
INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62391-2 First edition 2006-04 Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer capacitors for power
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 17306 First edition 2015-02-01 Petroleum products Biodiesel Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography Produits pétroliers
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-1 First edition 2011-08-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 1: High-power applications Véhicules
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7641 First edition 2012-11-15 Road vehicles Trailers up to 3,5 t Calculation of the mechanical strength of steel drawbars Véhicules routiers Remorques jusqu à 3,5 t Calcul de
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11992-1 Second edition 2003-04-15 Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical layer and data-link
Australian Standard. Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) AS AS 2788
AS 2788 2002 AS 2788 Australian Standard Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) This Australian Standard was prepared by Committee ME-035, Fluid Power Systems and Components.
ISO INTERNATIONAL STANDARD. Mopeds Methods for setting the running resistance on a chassis dynamometer
INTERNATIONAL STANDARD ISO 28981 First edition 2009-11-01 Mopeds Methods for setting the running resistance on a chassis dynamometer Cyclomoteurs Méthodes pour fixer la résistance à l'avancement sur un
TECHNICAL SPECIFICATION
IEC/TS 62257-7-3 TECHNICAL SPECIFICATION Edition 1.0 2008-04 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set Selection of generator sets
Australian Standard. Wind turbines. Part 2: Design requirements for small wind turbines. AS IEC IEC , Ed.2.
AS IEC 61400.2 2013 IEC 61400-2, Ed.2.0 (2006) AS IEC 61400.2 2013 Australian Standard Wind turbines Part 2: Design requirements for small wind turbines This Australian Standard was prepared by Committee
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
ISO 4928 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4928 Third edition 2006-07-15 Road vehicles Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62133 First edition 2002-10 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 19425 First edition 2015-12-15 Reciprocating internal combustion engines Measurement method for air cleaners Sound power level of combustion air inlet noise and insertion
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16924 First edition 2016-12-01 Natural gas fuelling stations LNG stations for fuelling vehicles Stations-service de gaz naturel Stations GNL pour le ravitaillement de véhicules
ISO 4925 INTERNATIONAL STANDARD. Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
INTERNATIONAL STANDARD ISO 4925 Second edition 2005-02-01 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems Véhicules routiers Spécifications pour liquides de frein à
EAST AFRICAN STANDARD
DEAS 186:2013 ICS 71.100.40 Toilet soap Specification EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY HS 3401.11.0000 EAS 2013 Second Edition 2013 Table of contents 1 Scope... 1 2 Normative references...
AS/NZS ISO :2013
ISO 7176-28:2012, IDT Australian/New Zealand Standard Wheelchairs Part 28: Requirements and test methods for stair-climbing devices AS/NZS ISO 7176.28:2013 This Joint Australian/New Zealand Standard was
DETAIL SPECIFICATION TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS)
METRIC (USAF) 25 July 2016 SUPERSEDING (USAF) 04 September 2015 DETAIL SPECIFICATION TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) This specification is approved for use by the Department of the Air
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60923 Edition 3.1 2006-09 Edition 3:2005 consolidated with amendment 1:2006 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) Performance
ISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
ISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-2 First edition 2014-02-15 Road vehicles Circuit breakers Part 2: User s guide Véhicules routiers Coupe-circuits Partie 2: Guide de l utilisateur Reference number ISO 10924-2:2014(E)