SOUTH AFRICAN NATIONAL STANDARD
|
|
- Nelson Young
- 6 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS/TC 147, Water, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in December Reaffirmed and reprinted in March This document will be reviewed every five years and be reaffirmed, amended, revised or withdrawn. SABS
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM Licensed exclusively to SABS. EN 937 January 1999 ICS Descriptors: water, potable water, water treatment, chemical compounds, chlorine, description, physical properties, chemical properties, impurities, toxic substances, tests, labelling, marking, storage, utilization English version Chemicals used for treatment of water intended for human consumption - Chlorine Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Chlore Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Chlor This European Standard was approved by CEN on 2 November CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E
4 Page 2 Licensed exclusively to SABS. Contents Page Foreword...3 Introduction Scope Normative references Description Identification Commercial form Physical properties Chemical properties Purity criteria Composition of commercial product Impurities and main by-products Toxic substances Test methods Labelling - Transportation - Storage Means of delivery Risk and safety labelling in accordance with the EU directives Transportation regulations and labelling Marking Storage...10 Annex A (informative) General information on chlorine...11 Annex B (normative) General rules relating to safety...13 Annex C (normative) Sampling and analytical methods...14 Annex D (informative) Bibliography...25
5 Page 3 Foreword This European Standard has been prepared by Technical Committee CEN/TC 164 "Water supply", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1999, and conflicting national standards shall be withdrawn at the latest by July According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
More informationDEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042
DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042
More informationSVENSK STANDARD SS-EN 12913
SVENSK STANDARD SS-EN 12913 Handläggande organ Fastställd Utgåva Sida Standardiseringsgruppen STG 1999-10-15 1 1 (1+13) Copyright SIS. Reproduction in any form without permission is prohibited. Products
More informationDEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
More informationDEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
More informationDEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016
DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)
More informationDEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
More informationWATER-TUBE BOILERS AND AUXILIARY
IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -
More informationDEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
More informationCOLD ROLLED STEEL SECTIONS -
STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL
More informationDEUTSCHE NORM February 2003
DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas
More informationDEUTSCHE NORM January 2004 DIN EN {
DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden
More informationINDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.
IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION
More informationGasflaskor Fyllningsförhållanden för batterifordon för acetylen
SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous
More informationRESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking
More informationEurocode 1 Actions on structures
BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British
More informationKemikalier för behandling av vatten för simbassänger Triklorisocyansyra
SVENSK STANDARD SS-EN 15032:2006 Fastställd 2006-07-13 Utgåva 1 Kemikalier för behandling av vatten för simbassänger Triklorisocyansyra Chemicals used for treatment of swimming pool water Trichloroisocyanuric
More informationFlödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997)
SVENSK STANDARD SS-EN ISO 10628 Fastställd 2003-04-04 Utgåva 1 Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) ICS
More informationDEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN
DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationCHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF VIRUCIDAL ACTIVITY AGAINST BACTERIOPHAGES OF
IRISH STANDARD I.S. EN 13610:2003 ICS 11.080.20 67.050 71.100.35 CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel:
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13652:2002 Soil improvers and growing media - Extraction of water soluble nutrients and elements Soil improvers and growing media - Extraction of water soluble nutrients and elements
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationEurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles
More informationEurocode 8: Design of structures for earthquake resistance
BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard
More informationAerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification
SVENSK STANDARD SS-EN 3747 Fastställd 2003-01-31 Utgåva 1 Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification ICS 49.025.40 Språk: engelska Publicerad: mars 2003 Copyright
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 805:2000 Water supply - Requirements for systems and components outside buildings Water supply - Requirements for systems and components outside buildings EESTI STANDARDIKESKUS EESTI
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination
More informationKondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001)
SVENSK STANDARD SS-EN ISO 4257 Fastställd 2001-09-14 Utgåva 2 Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) ICS 75.160.30
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword
More informationSVENSK STANDARD SS-EN 899. Processkemikalier för beredning av dricksvatten Svavelsyra
SVENSK STANDARD SS-EN 899 Fastställd 2003-06-18 Utgåva 2 Processkemikalier för beredning av dricksvatten Svavelsyra Chemicals used for treatment of water intended for human consumption Sulfuric acid ICS
More informationSVENSK STANDARD SS-EN Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning
SVENSK STANDARD SS-EN 13385 Fastställd 2002-04-19 Utgåva 1 Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning Transportable gas cylinders Battery
More informationDel 8: Krav på skyddsanordningar mot skadligt tryck. Shell boilers Part 8: Requirements for safeguards against excessive pressure
SVENSK STANDARD SS-EN 12953-8 Fastställd 2001-12-07 Utgåva 1 Eldrörspannor Del 8: Krav på skyddsanordningar mot skadligt tryck Shell boilers Part 8: Requirements for safeguards against excessive pressure
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 13577:2007 Fastställd 2007-04-16 Utgåva 1 Betong Kemiskt angrepp Bestämning av halt av aggressiv koldioxid i vatten Chemical attack on concrete Determination
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationSteel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing
Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI
More informationSVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar
SVENSK STANDARD SS-EN 1949/A1:2005 Fastställd 2005-07-28 Utgåva 1 Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar Specification for the installation
More informationSVENSK STANDARD SS-EN 12300
SVENSK STANDARD SS-EN 12300 Handläggande organ Fastställd Utgåva Sida Tryckkärlsstandardiseringen, TKS 1999-05-28 1 1 (1+11) Copyright SIS. Reproduction in any form without permission is prohibited. Cryogenic
More informationSVENSK STANDARD SS-EN Armering Specifikation för textila glasrovings Del 1: Beteckning
SVENSK STANDARD SS-EN 14020-1 Fastställd 2002-12-20 Utgåva 1 Armering Specifikation för textila glasrovings Del 1: Beteckning Reinforcements Specification for textile glass rovings Part 1: Designation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12092:2002 Adhesives - Determination of viscosity Adhesives - Determination of viscosity EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS- Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene and propylene adducts Surface active agents - Determination of ethylene oxide and propylene
More informationGasflaskor - Koniska gängor av typ 25E för anslutning av ventiler till gasflaskor - Del 2: Gängtolk
Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection Gasflaskor - Koniska gängor av typ 25E för anslutning av ventiler till gasflaskor - Del
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods Derivatives from coal pyrolysis
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 867-4:2001 Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 867-5:2002 Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers
More informationSkyddshandskar mot kemikalier och mikroorganismer
SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and
More informationSanitetsarmaturer Lågresistenta duscharmaturer. Low resistance shower outlets for sanitary tapware
SVENSK STANDARD SS-EN 13904:2004 Fastställd 2004-04-08 Utgåva 1 Sanitetsarmaturer Lågresistenta duscharmaturer Low resistance shower outlets for sanitary tapware ICS 91.140.70 Språk: engelska Publicerad:
More informationSVENSK STANDARD SS-EN ISO Gasflaskor Parallella gängor för anslutning av ventil till gasflaska Del 1: Specifikation (ISO :2001)
SVENSK STANDARD SS-EN ISO 15245-1 Fastställd 2001-12-07 Utgåva 1 Gasflaskor Parallella gängor för anslutning av ventil till gasflaska Del 1: Specifikation (ISO 15245-1:2001) Gas cylinders Parallel threads
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13654-1:2002 Soil improvers and growing media - Determination of nitrogen - Part 1: Modified Kjeldahl method Soil improvers and growing media - Determination of nitrogen - Part 1:
More informationPart 1: Specifications for pipes, fittings and the system English version of DIN EN
DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI
More informationSVENSK STANDARD SS-EN 14263:2004. Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck
SVENSK STANDARD SS-EN 14263:2004 Fastställd 2004-10-22 Utgåva 1 Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck Egenskaper och testmetoder Derivatives
More informationSVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005)
SVENSK STANDARD SS-EN ISO 4684:2005 Fastställd 2005-11-11 Utgåva 1 Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) Leather Chemical tests Determination of volatile matter (ISO 4684:2005)
More informationJärnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd
SVENSK STANDARD SS-EN 13146-5 Fastställd 2002-11-29 Utgåva 1 Järnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd Railway applications Track Test methods for fastening
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 13880-4 Fastställd 2003-07-11 Utgåva 1 Vägmaterial Varmapplicerade fogmassor för vägar och flygfält Del 4: Provningsmetod för bestämning av stabilitet för värmning, förändring i penetrationsvärde
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12723:2000 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units Liquid pumps - General terms for pumps and installations -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural
More informationVärmeväxlare Vattenkylda köldmediekondensorer
SVENSK STANDARD SS-EN 1117/A1 Fastställd 2002-11-22 Utgåva 1 Värmeväxlare Vattenkylda köldmediekondensorer Provningsmetoder för prestationsförmåga Heat exchangers Liquid cooled refrigerant condensers Test
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS
More informationContinuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as
More informationBUILDING LIME - PART 2: TEST METHODS IRISH STANDARD I.S. EN 459-2:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 459-2:2002 ICS 91.100.10 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 BUILDING LIME - PART 2: TEST METHODS NSAI 2002 Údarás um Chaighdeáin
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12806:2003 Automotive liquefied petroleum gas components - Other than containers Automotive liquefied petroleum gas components - Other than containers EESTI STANDARDIKESKUS EESTI
More informationDEUTSCHE NORM July 1998
DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85
More information