|
|
- Lisa Bradley
- 5 years ago
- Views:
Transcription
1
2 E x p o r t i n g P r o d u c t s C a t a l o g u e 1. Bitumen Penetration Grade (40/50 50/70 60/70 80/100 85/100) 2. Bitumen Viscosity Grade (VG10 VG20 VG30 VG40) 3. Bitumen Medium Curing Grade (MC30 MC70 MC250 MC3000) 4. Paraffin Wax 5. Residue Wax 6. Slack Wax 7. Petroleum Jelly 8. RPO 9. Base Oil
3 Bitumen Penetration Grade 40/50 : Bitumen Grade 40/50 CHARACTERISTICS TEST METHOD UNIT MIN. MAX. Specific Gravity at 25 C ASTM D70 C Penetration at 25 C, 100g, 5s ASTM D5 mm Softening Point ASTM D36 C Ductility at 25 C ASTM D113 Cm 100 Loss on heating ASTM D6 % 0.5 Drop in penetration after heating ASTM D5 % 20 Flash point ASTM D92 C 250 Solubility in Trichloroethylene ASTM D2042 % 99.5
4 Bitumen Penetration Grade 50/70: Bitumen Grade 50/70 CHARACTERISTICS TEST METHOD UNIT MIN. MAX. Penetration at 25 C, 100g, 5s EN 1426 mm Softening Point (Ring&Ball) EN 1427 C Kinematic Viscosity@135 C EN mm/s 295 Penetration Index EN Flash point (Cleveland Open) EN ISO 2595 C 230 Solubility in Toluene or Xylene EN % 99
5 Bitumen Penetration Grade 60/70: Bitumen Grade 60/70 CHARACTERISTICS TEST METHOD UNIT MIN. MAX. Specific Gravity at 25 C ASTM D70 C Penetration at 25 C, 100g, 5s ASTM D5 mm Softening Point ASTM D36 C Ductility at 25 C ASTM D113 Cm 100 Loss on heating ASTM D6 % 0.2 Drop in penetration after heating ASTM D5 % 20 Flash point ASTM D92 C 250 Solubility in Trichloroethylene ASTM D2042 % 99
6 Bitumen Penetration Grade 80/100: Bitumen Grade 80/100 CHARACTERISTICS TEST METHOD UNIT MIN. MAX. Specific Gravity at 25 C ASTM D70 C Penetration at 25 C, 100g, 5s ASTM D5 mm Softening Point ASTM D36 C Ductility at 25 C ASTM D113 Cm 100 Loss on heating ASTM D6 % 0.5 Flash point ASTM D92 C 225 Solubility in Trichloroethylene ASTM D2042 % 99
7 Bitumen Penetration Grade 85/100: Bitumen Grade 85/100 CHARACTERISTICS TEST METHOD UNIT MIN. MAX. Specific Gravity at 25 C ASTM D70 C Penetration at 25 C, 100g, 5s ASTM D5 mm Softening Point ASTM D36 C Ductility at 25 C ASTM D113 Cm 100 Loss on heating ASTM D6 % 0.5 Flash point ASTM D92 C 225 Solubility in Trichloroethylene ASTM D2042 % 99 Drop in penetration after heating ASTM D5 % 20
8 Bitumen Viscosity Grades (VG): VISCOSITY GRADE (VG) BITUMEN SPECIFICATION AS PER IS 73:2006 CHARACTERISTICS VG10 VG20 VG30 VG40 Absolute Viscosity 60C, Poises, min Kinematic Viscosity, 135oC, CST, min Flash point, C, min Solubility in trichloroethylene, %, min Penetration at 25 C Softening point, C, min Tests on residue from thin film over test / RTFOT: i. Viscosity ratio at 60oC, max ii. Ductility at 25oC, cm, min, after thin film over test
9 Bitumen Medium Curing (MC30): Property Min Max Test Method Kinematic viscosity at 60 ºc mm2/s ASTM D2170 Flash point (tag opencup), ºc 38 ASTM D3143 Distillate test: Distillate, volume, percent of total distillate to 360 ºc To 225 ºc 25 ASTM D402 To 260 ºc ASTM D402 To 316 ºc ASTM D402 Residue from distillation to 360 ºc, Percent volume by difference 50 ASTM D402 Test on residue from distillation : Viscosity at 60 ºc ASTM D2170 Penetration at 25 ºc ASTM D5 Ductility at 25 ºc 100 ASTM D113 Solubility in trichloroethylene, % 99 ASTM D2042
10 Bitumen Medium Curing (MC70): Property Min Max Test Method Kinematic viscosity at 60 ºc mm2/s ASTM D2170 Flash point (tag opencup), ºc 38 ASTM D3143 Distillate test: Distillate, volume, percent of total distillate to 360 ºc To 225 ºc 20 ASTM D402 To 260 ºc ASTM D402 To 316 ºc ASTM D402 Residue from distillation to 360 ºc, Percent volume by difference 55 ASTM D402 Test on residue from distillation : Viscosity at 60 ºc ASTM D2170 Penetration at 25 ºc ASTM D5 Ductility at 25 ºc 100 ASTM D113 Solubility in trichloroethylene, % 99 ASTM D2042
11 Bitumen Medium Curing (MC250): Property Min Max Test Method Kinematic viscosity at 60 ºc mm2/s ASTM D2170 Flash point (tag opencup), ºc 66 ASTM D3143 Distillate test: Distillate, volume, percent of total distillate to 360 ºc To 225 ºc 10 ASTM D402 To 260 ºc ASTM D402 To 316 ºc ASTM D402 Residue from distillation to 360 ºc, Percent volume by difference 67 ASTM D402 Test on residue from distillation : Viscosity at 60 ºc ASTM D2170 Penetration at 25 ºc ASTM D5 Ductility at 25 ºc 100 ASTM D113 Solubility in trichloroethylene, % 99 ASTM D2042
12 Bitumen Medium Curing (MC3000): Property Min Max Test Method Kinematic viscosity at 60 ºc mm2/s ASTM D2170 Flash point (tag opencup), ºc 66 ASTM D3143 Distillate test: Distillate, volume, percent of total distillate to 360 ºc To 225 ºc 10 ASTM D402 To 260 ºc 15 ASTM D402 To 316 ºc ASTM D402 Residue from distillation to 360 ºc, Percent volume by difference 80 ASTM D402 Test on residue from distillation : Viscosity at 60 ºc ASTM D2170 Penetration at 25 ºc ASTM D5 Ductility at 25 ºc 100 ASTM D113 Solubility in trichloroethylene, % 99 ASTM D2042
13 Paraffin Wax: Paraffin wax is a white or colorless soft solid derivable from petroleum, which can be processed and achieved in a wide range of physical and chemical properties, using different refining methods. Paraffin waxes are mostly graded according to the oil content, ranging from around 0.5% to above 20%. The change in oil content can lead to different physical and chemical behaviors of paraffin wax. Paraffin wax is mostly found in two types of Fullyrefined and Semirefined, with a typical melting point between about 46 and 68 C J g 1. Wax expands (115 and 154 F), and a density considerably when it melts and of around 900 kg/m3. It is this allows its use in wax insoluble in water, but soluble thermostatic in ether, benzene, and element thermostats for certain esters. Paraffin is industrial, domestic and, unaffected by most common particularly, automobile chemical reagents but burns re purposes. adily. Its heat of combustion is 42 kj/g. Paraffin wax is an excellent electrical insulator, with a resistivity of between 1013 and 1017 ohm meter. Paraffin wax is also an excellent material for storing heat, with a specific heat capacity of J g 1 K 1 (joules per gram kelvin) and a heat of fusion of
14 Paraffin Wax: Paraffin Wax is the primary and the main product. Ranging in different grades, Global Infinity is specialized in Semi Refined Paraffin Wax, which is applicable in industrial circumstances, and offers the product in different qualities: Types of Paraffin Wax Packing: PP Bags Containing: 6 slabs Wt.: 30±1 kg Net Wt.:29.5±1 kg Tare Wt.: 1 kg Packing Details: Protected by 3 straps Shrink wrapped (upon customer s request) 5layered Dimension:52.5 x 24.5 x 32.5 cm Metalized Bag Containing: 6 slabs Wt.: 25±1 kg Net Wt.:25±1 kg Tare Wt.: 1 kg Packing Details: Aluminum Tight and hard swing at the edges Dimension: 80 x 60 cm Carton Containing: 6 slabs Wt.: 30±1 kg Net Wt.:29.5±1 kg Tare Wt.: 1 kg Packing Details: Polypropylene bags Tight and hard swing at the edges Dimension: 84 x 55 cm
15 Types of Paraffin Wax Grades: Semirefined Paraffin Wax (12%) CHARACTERISTIC RESULT METHOD Oil content 12 % wt ASTM D721 Melting Point 6468 C ASTM D87 Flash Point C ASTM D92 Kinemeatic Viscosity at 100 C 67.5 CST ASTM D445 Color (Lovibond) White Method (2"cell) Packing: Cartons / Metalized bags Application: Candles, Match sticks, Tires, cosmetics, wooden boards, Tarpaulin, etc.
16 Types of Paraffin Wax Grades: Semirefined Paraffin Wax (24%) CHARACTERISTIC RESULT METHOD Oil content 24 % wt ASTM D721 Melting Point 6266 C ASTM D87 Flash Point C ASTM D92 Kinemeatic Viscosity at 100 C 67.5 CST ASTM D445 Color (Lovibond) White Method (2"cell) Packing: Cartons / Metalized bags Application: Candles, Match sticks, Tires, cosmetics, wooden boards, Tarpaulin, etc.
17 Types of Paraffin Wax Grades: Semirefined Paraffin Wax (57%) CHARACTERISTIC RESULT METHOD Oil content 46 % wt ASTM D721 Melting Point 6265 C ASTM D87 Flash Point C ASTM D92 Kinemeatic Viscosity at 100 C 67.5 CST ASTM D445 Color (Lovibond) Yellowish White Method (2"cell) Packing: Cartons / Metalized bags Application: Candles, Match sticks, Tires, cosmetics, wooden boards, Tarpaulin, etc.
18 Types of Paraffin Wax Grades: Semirefined Paraffin Wax (57%) CHARACTERISTIC RESULT METHOD Oil content 46 % wt ASTM D721 Melting Point 6265 C ASTM D87 Flash Point C ASTM D92 Kinemeatic Viscosity at 100 C 67.5 CST ASTM D445 Color (Lovibond) Yellowish White Method (2"cell) Packing: Cartons / Metalized bags Application: Candles, Match sticks, Tires, cosmetics, wooden boards, Tarpaulin, etc.
19 Residue Wax: Residue wax (also known as made this material a suitable Foots Oil) is the oil extracted substitute in industrial form Slack wax in the process applications. of producing Paraffin wax. Residue wax contains high percentage of oil and, based on the oil content, can be found as liquid or semisolid in the room temperature. Oily nature of residue wax makes this product applicable as a lubricant in industrial environments. Resides Wax (aka Foots Oil) is a byproduct derived from Slack Wax. Greasy nature of Reside Wax along with relatively cheap price, have Iron Drums Containing: Residue Wax Wt.: 195 kg Net Wt.:177 kg Tare Wt.: 18 kg Packing Details: Iron Drums
20 Residue Wax Grade: CHARACTERISTIC RESULT METHOD Oil content 3040 % wt ASTM D721 Melting Point 4050 C ASTM D127 Flash Point C ASTM D92 Kinemeatic Viscosity at 100 C 67.5 CST ASTM D445 Penetration at 25 C (1/10 mm) ASTM D937 Color (Lovibond) Yellowish White Method (2"cell) Packing: Iron Drums Application: Tire, Rubber, Plastic, Match sticks, Polish, etc.
21 Slack Wax: Slack wax is the feedstock for Paraffin Wax, which is a mixture of oil and wax. It is a byproduct derived in the process of producing Lube cut. During paraffin wax production, Slack wax is feeded into the system as raw material which is finally processed into different grades of Paraffin Wax after performing the refining processes, deoiling and bleaching. The oil extracted during the deoiling process, is a byproduct called Residue Wax (aka Foots Oil). Slack wax is naturally brown in color, ranging from 4% oil content to more than 35% Generally, there are two types of Slack wax: Light Slack Wax and Heavy Slack Wax, which can result in different types of paraffin wax applicable in various industries. Usually Light Slack wax is processed for production of fullyrefined paraffin wax which can be used in cosmetics and food industries. Yet, Heavy Slack Wax is usually processed into semirefined paraffin wax that contains higher weight percentage of oil in it and is applicable in candles, rubbers, adhesive and hot melts, inks, industries. Slack wax is feedstock for Paraffin Wax and Residue Wax. Although Slack Wax is more of a rax material than a product to the company, yet Global Infinity Co. can provide different types of slack wax for their customers upon their request. Iron Drums Containing: Residue Wax Wt.: 195 kg Net Wt.:177 kg Tare Wt.: 18 kg Packing Details: Iron Drums
22 Slack Wax Grades: Heavy Slack Wax (12%) CHARACTERISTIC RESULT METHOD Oil content 12 % wt ASTM D721 Melting Point 5462 C ASTM D938 Flash Point min. 245 C ASTM D92 Density at 15 C kg/l ASTM D4052 Color (Lovibond) Brown Method (2"cell) Packing: Drum / Metalized Bag Application: Paraffin manufacturing, fuel industries, etc.
23 Slack Wax Grades: Heavy Slack Wax (35%) CHARACTERISTIC RESULT METHOD Oil content Max 35 % wt ASTM: D721 Drop Melting Point 65 C ASTM: D127 Congealing Point 61 C ASTM: D937 Flash Point 265 C ASTM: D92 Kinemeatic C 8 CST ASTM: D445 Packing: Drum / Metalized Bag Application: Paraffin manufacturing, fuel industries, etc.
24 Petroleum Jelly: Petroleum Jelly, white petrolatum, recognized by the U.S. Food and soft paraffin/paraffin wax or multihydrocarbon, CAS number 8009 approved overthecounter (OTC) Drug Administration (FDA) as an 038, is a semisolid mixture of skin protectant, and remains hydrocarbons (with carbon widely used in cosmetic skin care. numbers mainly higher than 25), originally promoted as a topical ointment for its healing properties. After petroleum jelly became a medicine chest staple, consumers began to use it for myriad of ailments as well as cosmetic purposes, including toenail fungus, genital rashes (nonstd), nosebleeds, diaper rash, and chest colds. Its folkloric medicinal value as a "cureall" has since been limited by better scientific understanding of appropriate and inappropriate uses. It is
25 White Petroleum Jelly: Test/ Method I.P.1996 Specifications B.P.2002 Specifications U.S.P.25 Specifications Results Melting Range (Drop Point) 3856 C 4260 C 3860 C 4452 C Specific Gravity at 60 C Consistency at 25 C dmm Description White, Translucent, Soft, Unctuous Mass Solubility Soluble in chloroform, ether & light petroleum Insoluble in water & ethanol
26 Rubber Process Oil (RPO): Rubbers, both synthetic and natural are commercially used to produce products from rubber bands to a toy to the giant tires for various vehicles including aircrafts. Rubber Process Oils are used during mixing of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during further processing. Rubber Process Oils are specially developed taking into consideration the type of rubber and the end product applications. The range of Rubber Process Oils is broadly divided in following three categories. Aromatic types: The primary characteristics of aromatic hydrocarbons are the presence of the double bonded mix ring carbon structure. Naphthenic types: Naphthenic are a class of hydrocarbons also referred to as cycloparaffins. Though their structure is similar to the aromatic ring, these are single bonded thus having a stable structure. Paraffinic types: This class of hydrocarbons constitutes branched chain or straight linked hydrocarbon molecules of various viscosities. As the chain length increases, the viscosity increases and the rubber process oil becomes more viscous.
27 Aromatic RPO: Characteristics Test Methods PRO 701 PRO 702 PRO 801 PRO 150 Appearance Visual Color ASTM D 1500 Greenish Greenish Greenish Greenish Kinematic Viscosity at 40 C in cst ASTM D Kinematic Viscosity at 100 C in cst ASTM D Flash point (COC) C, minimum ASTM D Aniline Point C ASTM D Pour Point C, maximum ASTM D Carbon Type Analysis ASTM D 2140 CA % CN % CP % Acidity mgms KOH/ gm Oil, maximum ASTM D Volatile matter, % at 150 C for 1 Hour ASTM D 972 ( IS:1448 P 64) Compatibility NR,SBR & PBR NR, SBR & PBR NR,SBR & PBR NR,SBR & PBR Applications Tyres, Retread Rubber, Moulded & Extruded Products Moulded, Calendered & Extruded Products, Flooring & Rubber Sheets
28 Naphthenic RPO: Characteristics Test Methods PRO 501 PRO 507 L PRO 507 D Appearance Visual Bright & Clear Bright & Clear Bright & Clear Color ASTM D max Kinematic Viscosity at 40 C in cst ASTM D Kinematic Viscosity at 100 C in cst ASTM D 445 Flash point (COC) C, minimum ASTM D Aniline Point C ASTM D Pour Point C, maximum ASTM D Carbon Type Analysis ASTM D 2140 CA % CN % CP % Acidity mgms KOH/ gm Oil, maximum ASTM D Volatile matter, % at 150 C for 1 Hour ASTM D 972 ( IS:1448 P 64) Compatibility NR,SBR, EPDM & IIR NR,SBR,EPDM & IIR NR,SBR,EPDM & IIR Applications Extruded & Moulded Articles, Micro, Hawaii Sheets, LPG Tubes, Shoe Soles, Automotive Tubes Hawaii Slippers, Micro Cellular Sheets, Butyl Tube, Garden Hose, Firefighting Hose, LPG Tubes, Floor Tiles Micro & Hawaii Sheet, Automotive Tubes
29 Paraffinic RPO: Characteristics Test Methods PRO 2300 PRO 2300 N PRO 1423 W PRO 310 Appearance Visual Bright & Clear Bright & Clear Bright & Clear Bright & Clear Bright & Clear Color ASTM D max Kinematic Viscosity at 40 C in cst ASTM D Flash point (COC) C, minimum ASTM D Aniline Point C ASTM D Pour Point C, maximum ASTM D Carbon Type Analysis ASTM D 2140 CA % CN % CP % Acidity mgms KOH/ gm Oil, maximum ASTM D Volatile matter, % at 150 C for 1 Hour ASTM D 972 ( IS:1448 P 64) Compatibility EPDM & IIR EPDM & IIR EPDM & IIR RECLAIM RUBBER EPDM & IIR EPDM & IIR Applications Oil extended EPDM Rubber & Profile, Heat Resistant Conveyor Belts, Microwave/LCM Cured EPDM Profiles & Based Products, Butyl Tubes, Butyl Tubes, EPDM Profile, Conveyor Belts, Hoses & Other Moulded Butyl Tubes, Steam Cured, EPDM Profile
30 Base Oil : Base oils are used to manufacture products greater than 0.03 percent sulfur and have a including lubricating greases, motor oil and viscosity index greater than or equal to 80 metal processing fluids. Different products and less than 120". require different compositions and Group II properties in the oil. One of the most Better grade of petroleum base oil, which important factors is the liquid s viscosity at may be partially produced by Hyrocracking. various temperatures. Whether or not a API defines group II as "base stocks crude oil is suitable to be made into a base contain greater than or equal to 90 percent oil is determined by the concentration of saturates and less than or equal to 0.03 base oil molecules as well as how easily percent sulfur and have a viscosity index these can be extracted. greater than or equal to 80 and less than Base oil is produced by means of refining 120". crude oil. This means that the crude oil is Group III heated in order that various distillates can The best grade of petroleum base oil, since be separated from one another. During the they are fully produced by Hyrocracking, heating process, light and heavy which make these oils purer. hydrocarbons are separated the light API defines group III as "base stocks ones can be refined to make petrol and contain greater than or equal to 90 percent other fuels, while the heavier ones are saturates and less than or equal to 0.03 suitable for bitumen and base oils percent sulfur and have a viscosity index Group I greater than or equal to 120". The least refined type which produced by This group may be described as Synthetic Solvent Refining. It usually consists of Technology oils or HydroCracked Synthetic conventional petroleum base oils. oil. However, some oil companies may call API defines group I as "base stocks contain less than 90 percent saturates and/or their products under this group as synthetic oil. Group IV Consists of synthetic oils made of Polyalphaolfiens PAO. Polyalphaolfiens PAO oils are much more stable in extreme temperatures, which make much more suitable for use in very cold weather (as found in northern Europe) as well as very hot weather (as in Middle East). Group V Any type of base oil other than mentioned in the previously defined groups. They include, among others, naphthenic oils and esters
31 Base Oil SN90: Base Oil SN90 Specifications Min. Typical Max. Method Kinematic 40 C cst 20 ASTM D445 Kinematic 100 C cst ASTM D445 Viscosity Index 100 ASTM D2270 Flash Point (COC) C 177 ASTM D92 Pour Point C 9 ASTM D97 Carbon residue (Conradson) Wt% 0.05 ASTM D189 Total Acid Number mgkoh/g 0.05 ASTM D664 Demulsibility Pass ASTM D1401 Sulfur Content Wt% ASTM D1552 Color ASTM D C Kg/m³ 865 ASTM D1298 Copper Corrosion (3 100 C) 1A ASTM D130 Foam ml Nil ASTM D892
32 Base Oil SN150: Base Oil SN150 Specifications Min. Typical Max. Method Kinematic 40 C cst 38 ASTM D445 Kinematic 100 C cst ASTM D445 Viscosity Index 100 ASTM D2270 Flash Point (COC) C 190 ASTM D92 Pour Point C 6 ASTM D97 Carbon residue (conradson) Wt% 0.06 ASTM D189 Total Acid Number mgkoh/g 0.05 ASTM D664 Demulsibility Pass ASTM D1401 Sulfur Content Wt% ASTM D1552 Color ASTM D C Kg/m³ 875 ASTM D1298 Copper Corrosion (3 100 C) 1A ASTM D130 Foam ml Nil ASTM D892
33 Base Oil SN350: Base Oil SN350 Specifications Min. Typical Max. Method Kinematic 40 C cst 75 ASTM D445 Kinematic 100 C cst ASTM D445 Viscosity Index 95 ASTM D2270 Flash Point (COC) C 220 ASTM D92 Pour Point C 6 ASTM D97 Carbon residue (conradson) Wt% 0.06 ASTM D189 Total Acid Number mgkoh/g 0.05 ASTM D664 Demulsibility Pass ASTM D1401 Sulfur Content Wt% ASTM D1552 Color 2 1 ASTM D C Kg/m³ 880 ASTM D1298 Copper Corrosion (3 100 C) 1A ASTM D130 Foam ml Nil ASTM D892
34 Base Oil SN500: Base Oil SN500 Specifications Min. Typical Max. Method Kinematic 40 C cst 96 ASTM D445 Kinematic 100 C cst ASTM D445 Viscosity Index 95 ASTM D2270 Flash Point (COC) C 230 ASTM D92 Pour Point C 6 ASTM D97 Carbon residue (conradson) Wt% ASTM D189 Total Acid Number mgkoh/g 0.05 ASTM D664 Demulsibility Pass ASTM D1401 Sulfur Content Wt% 0.7 ASTM D1552 Color 2.5 ASTM D C Kg/m³ 885 ASTM D1298 Copper Corrosion (3 100 C) Nil ASTM D130 Foam ml Nil ASTM D892
35 Infinity Galaxy Address: P.O. Box, , Ras Al Khaimah, UAE
Contents. Rubber Process Oils Secondary Plasticiser for Thermoplastics, Elastomers & Plastics Aromatic Naphthenic...
Process Oils Contents Product Page Rubber Process Oils... 3 Aromatic... 3 Naphthenic... 4 Paraffinic... 5 Secondary Plasticiser for Thermoplastics, Elastomers & Plastics... 5 Process Oils Rubbers both
More informationSEMI REFINED PARAFFIN WAX 2-3% SPECIFICATION SEMI REFINED PARAFFIN WAX 3-5% SPECIFICATION LOW DENSITY POLYETHILENE WAX HIGH DENSITY POLYETHILENE WAX
SEMI REFINED PARAFFIN WAX 2-3% SPECIFICATION MELTING POINT 60-62 C º OIL CONTENT 2-3 % IN CARTON (25 KGS) APPLICATIONS CANDLE - TEXTILE - MDF - MATCH - CABLE... SEMI REFINED PARAFFIN WAX 3-5% SPECIFICATION
More informationPETROLEUM WAX & VASELINE PLANT
PETROLEUM WAX & VASELINE PLANT Seoul, Korea Q_iso s Activities OPTIMUM SOLUTION PROJECT MANAGEMENT FRONT-END ENGINEERING PROCESS & MECHANICAL ENGINEERING INSTALLATION & CONSTRUCTION OPERATION & MAINTENANCE
More informationUnitrade Company at a Glance
Unitrade ompany at a Glance World lass Petrochemical Supplier Unitrade ompany www. Unitradeco.com.my info@unitradeco.com.my Address: Level 2, Lot 19 Lazenda ommerical enter 3, 87007,Federal Territory of
More informationSupply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
More informationREBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
More informationCUSTOMS TARIFF - SCHEDULE. Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
CUSTOMS TARIFF - SCHEDULE 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate chemically
More informationCUSTOMS TARIFF - SCHEDULE V - 1
V - 1 Section V MINERAL PRODUCTS 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate
More informationNeutral Oils : 60R, 110RVL, 100R, 150R, 220R, 600R
Neutral Oils : 60R, 1RVL, 0R, 150R, 220R, 600R (80) Neutral Oils are all-hydroprocessed, / II+ paraffinic base oils that can be used in blending in a variety of lubricant and process oils. Application
More informationSoftening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer
Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification
More informationInfluence of Rubber Process Oils on EPDM Compound Properties. Dr. Markus Hoffmann SGF Meeting Huskvarna, Sweden November 24, 2016
Influence of Rubber Process Oils on EPDM Compound Properties Dr. Markus Hoffmann SGF Meeting Huskvarna, Sweden November 24, 2016 About Nynas AB 2 Nynas is the largest specialty oil producer in Europe Offices
More informationएमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
More informationModule8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS
FUELS AND EFFECTS ON ENGINE EMISSIONS The Lecture Contains: Transport Fuels and Quality Requirements Fuel Hydrocarbons and Other Components Paraffins Cycloparaffins Olefins Aromatics Alcohols and Ethers
More informationBEARING OILS FOR STEEL PLANTS HP FILM OIL
BEARING OILS FOR STEEL PLANTS HP FILM OIL Special Features: HP FILM OILS are highly refined mineral oils suitable for oil film bearings used in steel plants. The product is blended from solvent extracted
More informationDiluent Evaluation for Pipelining
NCUT National Centre for Upgrading Technology a Canada Alberta alliance for bitumen and heavy oil research Diluent Evaluation for Pipelining Parviz Rahimi, Zhiming Fan, Simon Cooper, Teclemariam Alem,
More informationSYNTHETIC BASE STOCKS
Polybutenes Acetylene Black Performance mance Chemical Additiv Additives Polyalphaolefins Alkylate Fluids Refrigeration Fluids Dielectric Fluids Cable Flood, Fill & Gels SYNTHETIC BASE STOCKS Corrosion
More informationPersian Gulf Polymer, established in 2016, is a reputed, professionally managed business company active in
About Us Persian Gulf Polymer, established in 2016, is a reputed, professionally managed business company active in the field of oil, gas, chemical and petrochemical products. The company s main focus
More information9e Lustrum VKRT. Oils, A surprising impact on rubber. 12 November 2010,Vaals. Rogier van Hoof. General Manager Benelux
9e Lustrum VKRT Oils, A surprising impact on rubber 12 November 2010,Vaals Rogier van Hoof General Manager Benelux 1 Agenda Nynas company profile Oils for rubber vs. rubber for oil Global refining trends
More informationPrestanda och karaktäristik för Grupp I- basoljor. Henrik Marits, Nynas AB, Naphthenics Underhållsdagen 24 november 2015
Prestanda och karaktäristik för Grupp I- basoljor Henrik Marits, Nynas AB, Naphthenics Underhållsdagen 24 november 2015 Outline A brief overview of base oils API Groups I to V and their applications A
More informationCOMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320
COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,
More informationDMS-9203, Asphaltic Concrete Patching Material (Containerized)
Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.
More informationOregon Department of Transportation Standard Specifications For Asphalt Materials 2004
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt
More informationLubricants and Greases. Shibu G. Pillai
Lubricants and Greases Shibu G. Pillai Contents Introduction Functions of lubricants Mechanism of lubrication Classification of lubricants Properties of lubricants Selection of lubricants Classification
More informationSection 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily
More informationPPG NOVAGUARD 650 Chemical Resistance Guide
Validity of this list This resistance list supersedes all earlier issues. The information provided in this resistance list is to the best of our knowledge correct and given in good faith. It is not intended
More informationLow carbon content Carbon content lower than 0.01%wt. Low nitrogen content Very low content of nitrogen compounds (traces)
BASE oils The refinery PARAMO, a.s. founded in the year 1889 is a traditional producer of fuel, lubricants and a leading producer of bitumen and related products in the Czech Republic. Research and manufacturing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationUSES FOR RECYCLED OIL
USES FOR RECYCLED OIL What happens to your recycled used oil? Used oil, or 'sump oil' as it is sometimes called, should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants
More informationDMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)
Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationFREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
More informationCharacterization of crude:
Crude Oil Properties Characterization of crude: Crude of petroleum is very complex except for the lowboiling components, no attempt is made by the refiner to analyze for the pure components that contained
More informationSpecifications of Products
ations of Products General Purpose Oil : White Mineral Oil Kinematic Viscocity 15/4 cst 40 HP-080 0.875 7.85 180 78-25.0 Lubricants and petrochemical applications, textile HS-080 0.864 8.56 158 60-35.0
More informationAdditin RC 9305 Additive Package
Technical Data Sheet Additin RC 935 Additive Package Type Ashless multifunctional oxidation, rust and wear inhibiting additive package - for antiwear hydraulic fluids according to: DIN 51524, part 2 and
More informationOIL REFINERY PROCESSES
OIL REFINERY PROCESSES 1 Types of hydrocarbons Types of hydrocarbons (parafffins, naphthenes, and aromatics). This rating is important to the refinery since the value of the crude oil decreases from classification
More informationArticle: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018
Article: The Formation & Testing of Sludge in Bunker Fuels By Dr Sunil Kumar Laboratory Manager VPS Fujairah 15th January 2018 Introduction Sludge formation in bunker fuel is the source of major operational
More informationHari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
More informationuridongne co,. ltd. uridongne co., ltd. Industrial Lubricants
Industrial Lubricants uridongne co,. ltd. Lubricant Research Institute #40 Galji-ro, Namsan-myeon, Gyeongsan-si, Gyeongsangbuk-do, 38573, South Korea TEL : +82-53-857-5900 FAX : +82-53-851-7116 www.euridongne.com
More informationANNEX 2, REFERENCE FUELS
ANNEX 2, REFERENCE FUELS A.2.1. A.2.1.1. EUROPE, INDIA, SOUTH AFRICA Petrol (E5) Parameter Unit Limits (1) Test method Research octane number, RON 95.0 EN 25164 pren ISO 5164 Motor octane number, MON 85.0
More informationOil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p.
Oil & Gas From exploration to distribution Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir W3V19 - Refining Processes1 p. 1 Crude Oil Origins and Composition The objective of refining, petrochemical
More informationSHELLSOL D60. Shell Chemicals. Data Sheet. Lemont, IL Cotton Valley, LA. Product Name
Shell Chemicals Data Sheet Product Name SHELLSOL D60 This product is manufactured at more than one production site. The sales specifications of these products are the same, some typical data however may
More informationJOHNSON CONTROLS PARTS CENTRE. Sabroe S68 refrigeration oil
JOHNSON CONTROLS PARTS CENTRE refrigeration oil Hydro-treated, high performance oil for refrigeration Sabroe offers the highest quality lubricants available for today s refrigeration market. The increased
More informationPhysical Properties of Alkanes
Physical Properties of Alkanes The common physical properties that we will focus on are: Melting point Boiling point Solubility However, any inferences drawn on these may also extend to other properties
More informationPetroleum Refining Fourth Year Dr.Aysar T. Jarullah
Oil Products 1- Gaseous Fuels. Natural gas, which is predominantly methane, occurs in underground reservoirs separately or in association with crude oil. The principal types of gaseous fuels are oil (distillation)
More informationDMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)
DMS - 9202 (STOCKPILE STORAGE) EFFECTIVE DATES: AUGUST 2004 APRIL 2010. 9202.1. Description. This Specification governs for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile
More informationFuel Related Definitions
Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the
More informationMATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1102 APRIL 2017 (FORMERLY OPSS 1102, NOVEMBER 2007) Note: The PROV implemented in April 2017 replaces OPSS 1102 COMMON, November 2007 with no
More informationShellSol T. Data Sheet. Isoparaffins. Product Name. Africa Q7412. Product Code. Product Category. CAS Registry Number
Data Sheet Product Name Issued: 23-Jul-2009 ShellSol T Product Code Q7412 Africa Product Category Isoparaffins CAS Registry Number 64741-65-7 EINECS Number 265-067-2 Description Typical Properties ShellSol
More informationANNEX 3 REFERENCE FUELS. Parameter Unit Limits (1) Test method Minimum Maximum Research octane number, RON
WLTP-2012-018 Annex 3 Draft Reference fuels 03.06.2012 ANNEX 3 REFERENCE FUELS The reference fuel specifications listed in this annex are those that are to be used for the WLTP Validation 2 exercise and
More informationएमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
More informationProduction of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
More informationMATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 1102 NOVEMBER 2016 MATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS TABLE OF CONTENTS 1102.01 SCOPE
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationAlkylate. Alkylate petrol has been used in many years as an environmentally and healthy adjusted fuel for forest workers and other. WHY?
Alkylate Alkylate petrol has been used in many years as an environmentally and healthy adjusted fuel for forest workers and other. WHY? In various ways we affect our surroundings and our environment. If
More informationPetroleum Oils for Rubber
Petroleum Oils for Rubber Refining, Properties, Polymer Compatibility Jude Abia, PhD AEQ Technical Session Nov 8, 2017 @ Bromont, Quebec HollyFrontier Overview Inland Merchant Refiner 5 refineries in Mid
More informationCeiba Crude (31.44 API, Sul WT%)
Ceiba Crude (31.44 API, 0.398 Sul WT%) Crude Name: Ceiba Crude API Gravity API 31.44 Component Wt % Vol % Crude ID: CEIBA2015 Density @15 deg C KG/L 0.8679 C2 Minus 0.004 0.01 Country: Equatorial Guinea
More informationSmoke Point Significance and Use
Smoke Point The maximum height, in millimetres, of a smokeless flame of fuel burned in a wick-fed lamp of specified design. The sample is burned in an enclosed wick-fed lamp that is calibrated against
More informationTypes of Oil and their Properties
CHAPTER 3 Types of Oil and their Properties Oil is a general term that describes a wide variety of natural substances of plant, animal, or mineral origin, as well as a range of synthetic compounds. The
More informationMILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
More informationFig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]
Introduction :Composition of petroleum,laboratory tests,refinery feedstocks and products Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy
More informationWHITE OILS MAX 160 MIN. liquid cst
WHITE OIL 8 0.812 0.845 0.810 0.842 0.819 0.816 7 10 cst 5 cst 476 6 MAX 39 150 MIN 154 WHITE OIL 12 0.818 0.858 0.815 0.855 0.824 0.821 10 14 cst 19 cst 6 MAX 24 160 MIN 166 476 The above data is indicated
More informationNational Oil Corporation Libyan Petroleum Institute. Crude oil assay Sarir crude oil
National Oil Corporation Libyan Petroleum Institute Crude oil assay Sarir crude oil Work Order No. LPI- 00344/10/IL02/2008 Client: National Oil Corporation Date of Issue: Dec., 2008 Prepared by: Industrial
More informationNational Oil Corporation Libyan Petroleum Institute. Crude Oil Assay Messla Crude Oil
National Oil Corporation Libyan Petroleum Institute Crude Oil Assay Messla Crude Oil Work Order No. LPI- 00344/08/IL02/2008 Client: National Oil Corporation Date of Issue: Nov., 2008 Prepared by: Industrial
More informationCrude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist
Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist
More informationFig 1. API Classification of base oils
SYNTHETIC VS MINERAL OIL Introduction Oil is the life blood of an engine and just like the blood in our bodies, it is required to fulfill a number of functions. Oil does not only lubricate, it also carries
More informationConversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES
Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES 1 Physical and chemical processes Physical Thermal Chemical Catalytic Distillation Solvent extraction Propane deasphalting Solvent dewaxing
More informationKing Industries, Inc. Additives & Synthetic Base Oils for Use in Lubricants with Incidental Food Contact
King Industries, Inc. Additives & Synthetic Base Oils for Use in Lubricants with Incidental Food Contact NSF HX-1 Registered Products: KR - Synthetic Base Oils AW - Multi-functional Additive K-CORR NF
More informationOil to boost your refrigeration performance. PR-OLEO C-MH68A / C-MH68A-FG. Premium-Quality Ammonia Refrigeration Oils
Oil to boost your refrigeration performance. PR-OLEO C-MH68A / C-MH68A-FG Premium-Quality Ammonia Refrigeration Oils 2 PR-OLEO C-MH68A / C-MH68A-FG Significant advantages over common ammonia refrigeration
More informationCHAPTER 5 FUEL CHARACTERISTICS
66 CHAPTER 5 FUEL CHARACTERISTICS 5.1 EVALUATION OF PROPERTIES OF FUELS TESTED The important properties of biodiesel, biodiesel-diesel blends, biodiesel-ethanol blends, biodiesel-methanol blends and biodiesel-ethanoldiesel
More informationFundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna
Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More information1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More information15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines.
15W40 CH4/SJ : This oil is a high performance, dedicated heavy duty engine lubricant designed for use in modern high speed turbocharged diesel engines. It uses an exclusive additive formulation in conjunction
More information1 The diagram shows the separation of petroleum into fractions. gasoline. petroleum Z. bitumen. What could X, Y and Z represent?
1 The diagram shows the separation of petroleum into fractions. gasoline X Y petroleum Z bitumen What could X, Y and Z represent? 2 What is not the correct use for the fraction named? name of fraction
More informationAdvancements in bright stock refining technology. Timothy Langlais Technical Marketing Manager, Specialty Base Oils
Advancements in bright stock refining technology Timothy Langlais Technical Marketing Manager, Specialty Base Oils Which product below is refined from naphthenic crude? L R API Classification Group I Group
More informationDMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)
Asphaltic Concrete Patching Material (Stockpile Storage or Bagged) Effective Date: May 2017 1. DESCRIPTION This Specification governs for crushed stone asphaltic concrete intended primarily as a cool-
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 16
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 16 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More informationAnalysis of gas condensate and its different fractions of Bibiyana gas field to produce valuable products
Available online at www.banglajol.info Bangladesh J. Sci. Ind. Res. 50(1), 59-64, 2015 Analysis of gas condensate and its different fractions of Bibiyana gas field to produce valuable products S. M. A.
More informationINDUSTRIAL GEARBOX OILS PARTHAN EP
INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby
More informationSpecial Provision No. 111S12 July 2017
AMENDMENT TO OPSS 1103, NOVEMBER 16 Special Provision No. 111S12 July 17 OPSS 1103, November 16, Material Specification for Emulsified Asphalt, is deleted in its entirety and replaced with the following:
More informationAEROSHELL PRESERVATIVES
AEROSHELL AEROSHELL AeroShell Preservatives are used for the preservation and protection of aircraft, aircraft engines and aircraft components. Two classes of corrosion preservatives are used on aircraft,
More informationHarmonized Tariff Schedule of the United States (2005) Annotated for Statistical Reporting Purposes
CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES 27-1 Notes 1. This chapter does not cover: (a) (b) Separate chemically defined organic compounds,
More informationTests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL. SINCE 1985 Quality Controlled Through Analysis
Tests conducted under the following industry standards for PermaFrost API ASHRAE ARI ASTM EPA ANSI UL SINCE 1985 Client: Powertron LLC Requested By: Mr. Tony Sgarbi Sample: 10% PermaFrost + 90% Report
More informationCHAPTER 2 REFINERY FEED STREAMS: STREAMS FROM THE ATMOSPHERIC AND VACUUM TOWERS
CHAPTER 2 REFINERY FEED STREAMS: STREAMS FROM THE ATMOSPHERIC AND VACUUM TOWERS About This Chapter The previous chapter introduced crude oil as a mixture of compounds. The characteristics of these compounds
More informationFORLINE LTD. Global Energy Solutions Kenneth Pike, Suite 200B Greenville, Delaware, 19807, USA. 19 Kathleen Road, SW11 2JR, London, England
Greenville, Delaware, 9807, USA Gasoline Diesel Jet Fuel Motor Oil Crude Oil 9 Kathleen Road, SW 2JR, Company Overview Forline LTD is London, UK based integrated distributor and marketer of commodities.
More informationPETE 203: Properties of oil
PETE 203: Properties of oil Prepared by: Mr. Brosk Frya Ali Koya University, Faculty of Engineering, Petroleum Engineering Department 2013 2014 Lecture no. (3): Classification of Crude oil 6. Classification
More informationCHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES NOTES: 1. This Chapter does not cover: (a) Separate chemically defined organic compounds
More information294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680
294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680 Supreme Gear Lube No Tack is a multipurpose thermally stable and thermally durable para-synthetic gear lubricant that is recommended
More informationSpecialty Industrial Lubricants
Specialty Industrial Lubricants Since 1958, The Orelube Corporation has manufactured and marketed Specialty Lubricating Oils & Greases for Industrial applications worldwide. From synthetic base fluids
More informationSpecifications Of Straight Run Naphtha for Exportation
Specifications Of Straight Run Naphtha for Exportation ASTM Specific Gravity @ 60/60 F 1298 160 0.690-0.730 Colour VISUAL Colourless R.V.P @ 100 F kg/cm2 max 323 69 0.07 Sulphur, Total %mass max 1266 107
More informationNEAT ASPHALTS 40-50, 60-70, , , , & Complies to ASTM D 946 & AASHTO M20, BS 3670 DIN 1995
NEAT ASPHALTS 4050, 6070, 80100, 85100, 120150, 180200 & 200300 Complies to 946 & AASHTO M20, BS 3670 DIN 1995 DESCRIPTION PenetrationGrade Asphalt Cement for use in the construction and maintenance of
More informationProject Reference No.: 40S_B_MTECH_007
PRODUCTION OF BIODIESEL FROM DAIRY WASH WATER SCUM THROUGH HETEROGENEOUS CATALYST AND PERFORMANCE EVALUATION OF TBC DIESEL ENGINE FOR DIFFERENT DIESEL AND METHANOL BLEND RATIOS Project Reference No.: 40S_B_MTECH_007
More informationGroup I replacement in industrial oil formulations: A look at hydraulic fluids
Group I replacement in industrial oil formulations: A look at hydraulic fluids 5 to Encontro Internacional com o Mercado, June 2015 Dr. Luis Bastardo-Zambrano, Nynas AB Lubricant base oil slate development
More informationPetroleum Refining Fourth Year Dr.Aysar T. Jarullah
Catalytic Operations Fluidized Catalytic Cracking The fluidized catalytic cracking (FCC) unit is the heart of the refinery and is where heavy low-value petroleum stream such as vacuum gas oil (VGO) is
More informationBy Authority Of THE UNITED STATES OF AMERICA Legally Binding Document
By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has
More informationDevelopment of the CONCAWE SCEDs Arlean Rohde, CONCAWE
Development of the CONCAWE SCEDs Arlean Rohde, CONCAWE ENES4, Helsinki, 16-17 May 2013 Outline What are petroleum substances? Which petroleum substances are sold for consumer uses? And what do these uses
More informationLGFD 2 SKF Food Grade Lubricants
LGFD 2 SKF Food Grade Lubricants High load food grade grease SKF LGFD 2 is a premium synthetic base oil and Aluminium complex thickened grease suitable for applications experiencing high loads. Excellent
More informationHeritage Research Group 940 N. Wynn Rd - Oregon, OH Phone (419) Fax (317)
CSS-1h Furol Viscosity @ 25 C, sec. Residue by Weight, % Cement Mixing Test, % Particle Charge Test 35 64.5 0.8 0.9 ASTM D 6935-04 Penetration @ 25 C, dmm. Solubility, % Ductility @ 25 C 60 99.9 100+ ASTM
More information