Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]

Size: px
Start display at page:

Download "Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17]"

Transcription

1 Introduction :Composition of petroleum,laboratory tests,refinery feedstocks and products Fig:1.1[15] Fig.1.2 Distribution of world energy resources. (From World Energy Outlook 2005, International Energy Agency.)[16,17] Introduction to petroleum refinery Petroleum refineries have goal to convert as much of the barrel of crude oil into transportation

2 fuels which is economically practical. Refineries produce many profitable products however, the high volume profitable products are the transportation fuel gasoline, diesel and turbine (jet) fuels, and the light heating oils. These transportation fuels have boiling points between 25 and 350 o C. Although products such as lubricating oils, refrigeration and transformer oils, and petrochemical feedstocks are profitable.they amount to less than 5 percent of the total crude oil charged to refineries. The processing equipment indicated is for processing crude oils of average gravities and sulfur contents. Crude oils with low API gravities (high specific gravities) and high sulfur contents require additional hydrotreating equipment. The quality of crude oils processed by worldwide refineries is expected to worsen slowly in the future with the sulfur contents and densities to increase. Therefore refineries will require processing the entire barrel of crude rather than just the material boiling below (550 o C).Sulfur restrictions on fuels, coke and heavy fuel oils affects the bottom of the barrel processing as well. These factors requires extensive refinery additions modernization the shift in market requirements among gasolines and reformulated fuels for transportation challenges. [16] Refinery Overview [15 20] The crude oil is heated in a furnace and charged to an atmospheric distillation tower, where it is separated into light gas (C 1 C 4 ), light naphtha, heavy naphtha, kerosine, atmospheric gas oil, and reduced (topped) crude. The reduced crude is sent to the vacuum distillation tower and separated into vacuum gas oil stream and vacuum reduced crude bottoms (residua, resid). The reduced crude bottoms from the vacuum distillation tower is thermally cracked in a delayed coker to produce gas, coker gasoline, coker gas oil, and coke. The atmospheric and vacuum crude unit gas oils and coker gas oil are used as feedstocks for the catalytic cracking or hydrocracking units where heavy molecules get converted into lower molecular weight compounds boiling in the gasoline and distillate fuel ranges. The hydrocracked products are saturated whereas catalytic cracker products are unsaturated and further need improvement in quality by either hydrotreating or by reforming. The light naphtha streams from the crude tower, coker and cracking units are sent to an isomerization unit to convert straight chain paraffins into isomers which have higher octane numbers. The heavy naphtha streams from the crude tower, coker, and cracking units are fed to the catalytic reformer to improve octane numbers. The products from the catalytic reformer can be blended into regular and premium gasolines for marketing. The wet gas streams from the crude unit, coker, and cracking units are separated in the vapor recovery section (gas plant) into fuel gas, liquefied petroleum gas (LPG), unsaturated hydrocarbons (propylene, butylenes, and pentenes), normal butane, and isobutane. The fuel gas is burned as a fuel in refinery furnaces and the normal butane is blended into gasoline or LPG. The unsaturated hydrocarbons and isobutane are sent to the alkylation unit to react olefins with isobutane to yield isoparaffins. The alkylation is done at high pressure and low temperature in the presence of sulfuric or hydrofluoric acid as catalyst. The product is called alkylated gasoline, which is a high octane product blended into premium motor gasoline and aviation gasoline. The middle distillates from the crude unit, coker, and cracking units are blended into diesel and jet fuels and furnace oils. In some refineries, the heavy vacuum gas oil and reduced crude from paraffinic or naphthenic base crude oils are processed into lubricating oils. The asphaltenes are removed in a propane deasphalting unit, and the reduced crude from bottoms are processed with the vacuum gas oils to produce lubeoil base stocks (LOBS). The vacuum gas oils and deasphalted stocks are solvent extracted to remove the aromatic compounds followed by dewaxing to improve the pour point. These LOBS are further treated with acid clays to improve their color and stability before being blended into lubricating oils. Each refinery has its own unique processing scheme which is determined by the process equipment available, crude oil characteristics, operating costs, and product demand. Refinery Feed Stocks [19 20] The basic raw material for refineries is petroleum or crude oil. The chemical compositions of crude

3 oils obtained from various sources are almost uniform although their physical characteristics vary widely. The elementary composition of crude oil usually falls within the following ranges: C 84 88; H 11 15; S up to 5%, N up to 0.5 %. Crude oils are classified as paraffin base, naphthene base, asphalt base, or mixed base depending upon the composition of the residue left after distillation. Crude oils which have up to 80% aromatic content are known as aromatic base oils. The U.S. Bureau of Mines has developed a system which classifies the crude according to two key fractions obtained in distillation: No. 1 from 250 to 275 o C at atmospheric pressure and No. 2 from 275 to 300 o C at 40 mmhg pressure. The API gravity of these fractions varies depending upon paraffinic and naphthenic grade of the crude(paraffin : API 40 for No. 1 and 30 for No. 2, Naphthene : API < 30 for No. 1 oil and <=20 for No. 2 oil). The paraffinic and asphailtic classifications in common use are based on the properties of the residuum left from nondestructive distillation and are more descriptive to the refiner because they convey the nature of the products to be expected and the processing necessary. Composition Of Petroleum [19 20] Crude oils are composed of many members of homologous series of hydrocarbons. Petroleum is essentially a mixture of hydrocarbons, and even the non hydrocarbon elements are generally present as components of complex molecules predominantly hydrocarbon in character, but containing small quantities of oxygen, sulfur, nitrogen, vanadium nickel, and chromium. The composition of the total mixture, in terms of elementary composition, does not vary a great deal, but small differences in composition can greatly affect the physical properties and the processing required to production marketable products. The hydrocarbons present in crude petroleum are classified into three general types: paraffins, naphthenes, and aromatics. Olefins are generally not present in crude oil, however these are formed during processing by the dehydrogenation of paraffins and naphthenes. The paraffin series of hydrocarbons is characterized by the rule that the carbon atoms are connected by a single bond and the other bonds are saturated with hydrogen atoms.the general formula for paraffins is C n H 2n+2. Crude oil contains molecules with up to 70 carbon atoms, and the number of possible paraffinic hydrocarbons is very high.olefins do not naturally occur in crude oils but are formed during the processing. They are very similar in structure to paraffins but at least two of the carbon atoms are joined by double bonds. The general formula is C n H 2n. Olefins are generally undesirable in finished products because the double bonds are reactive and the compounds are more easily oxidized and polymerized to form gums and varnishes. Olefins containing five carbon atoms have high reaction rates with compounds in the atmosphere that form pollutants and, even though they have high research octane numbers, are considered generally undesirable. Some diolefins (containing two double bonds) are also formed during processing, but they react very rapidly with olefins to form high molecular weight polymers consisting of many simple unsaturated molecules joined together. Diolefins are very undesirable in products because they are so reactive they polymerize and form filter and equipment plugging compounds. Cycloparaffin hydrocarbons in which all of the available bonds of the carbon atoms are saturated with hydrogen are called naphthenes. There are many types of naphthenes present in crude oil, but except for the lower molecular weight such as cyclopentane and cyclohexane, are generally not handled as individual compounds. They are classified according to boiling range and their properties determined with the help of correlation factors such as the characterization (K w ) factor or correlation index ( CI). The aromatic series of hydrocarbons is chemically and physically very different from the paraffins and cycloparaffins (naphthenes). The cyclic hydrocarbons, both naphthenic and aromatic, can add paraffin side chains in place of some of the hydrogen attached to the ring carbons and form a mixed structure. Petroleum /crude oil [19] Petroleum (also called crude oil) is a mixture of gaseous, liquid, and solid hydrocarbon

4 compounds. Petroleum occurs in sedimentary rock deposits throughout the world and also contains small quantities of nitrogen oxygen and sulfur containing compounds as well as trace amounts of metallic constituents. Petroleum [19] The fuels derived from Petroleum contribute approximately one third to one half of the total world energy supply and are used for transportation fuels (gasoline,diesel fuel,and aviation fuel,among others) and heating buildings. Petroleum products have a wide variety of uses that vary from gaseous and liquid fuels to near solid machinery lubricants. Residue of many refinery processes asphalt is now a premium value product for highway surfaces, roofing materials, and miscellaneous waterproofing uses. Crude petroleum is a mixture of compounds boiling at different temperatures that can be separated into a variety of different generic fractions by distillation and the terminology of these fractions has been bound by utility and often bears little relationship to composition. Major Processes: [19 20] Desalting Sweetening Hydrogen Generation Unit DHDS/DHDT Reformer Isomerisation Amine Treating Sulphur Recovery Unit Bitumen Blowing Unit Lube and wax Solvent Extraction Solvent dewaxing Solvent Deoiling Solvent deasphalting Lube isomerisation Hydrodesulfurisation

5 Typical Refinery Products Fig:1.3 [15] A typical REFINERY PROCESS CHART LPG 2.1% NAPHTHA 5.0% MS 11.2% OTHERS 18.3% LIGHT DISTILLATE 36.6% ATF 9.0 Chemistry in Fuel refining Key properties of Fuels MS: Octane number, Sulphur, distillation, Oxidation stability, Bz/ Aromatics/ Olefin content. HSD: Cetane number,sulphur,distillation,lubricity. Kerosene: Smoke Point. ATF: Freezing point. Furnace oil: Stability. Bitumen: Penetration, viscosity, Softening point. LOBS: Viscosity, Viscosity Index. Definations and Terminology [19,20]

6 Petroleum is a mixture of gaseous, liquid, and solid hydrocarbon compounds that occur in sedimentary rock deposits throughout the world and also contains small quantities of nitrogen, oxygen, and sulfur containing compounds as well as trace amounts of metallic constituents.petroleum is a naturally occurring mixture of hydrocarbons, generally in a liquid state, which may also include compounds of sulfur, nitrogen, oxygen, metals, other elements.any naturally occurring hydrocarbon, whether in a liquid, gaseous, or solid state may found explorations. Complexity of a refinery [19,20] The combination of refining processes and operations employed (complexity) varies from one refinery to another.modern refinery is highly complex, energy and capital intensive. Role of catalytic processes, secondary processing and hydroprocessing is increasing.factors deciding the complexity of a refinery. Nature/source of crude oils flexibility to process variety of crudes. Demand pattern in the markets. Product quality current/ future. Production of feedstocks for downstream units. Inter fuel substitution. Separation : Heavy on the bottom, light on the top The separation of crude oil by atmospheric and vacuum distillation into groups of hydrocarbon compounds of different boiling point ranges called fractions or cuts. The first step in crude oil processing, where the first separation takes place is called Crude Distillation Unit (CDU) Atmospheric & Vacuum Unit (AVU). This step is performed in all refineries :These units are called Mother Units Typical products from CDU are : Gas, LPG, naphtha, SKO/ATF, HSD and RCO. Vacuum Distillation of RCO produces VGO (or LOBS cuts) and VR All products need further treatment/processing.

On-Line Process Analyzers: Potential Uses and Applications

On-Line Process Analyzers: Potential Uses and Applications On-Line Process Analyzers: Potential Uses and Applications INTRODUCTION The purpose of this report is to provide ideas for application of Precision Scientific process analyzers in petroleum refineries.

More information

Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna

Fundamentals of Petroleum Refining Refinery Products. Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna Fundamentals of Petroleum Refining Refinery Products Lecturers: assistant teachers Kirgina Maria Vladimirovna Belinskaya Natalia Sergeevna 1 Refinery Products Composition There are specifications for over

More information

Distillation process of Crude oil

Distillation process of Crude oil Distillation process of Crude oil Abdullah Al Ashraf; Abdullah Al Aftab 2012 Crude oil is a fossil fuel, it was made naturally from decaying plants and animals living in ancient seas millions of years

More information

Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES

Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES 1 Physical and chemical processes Physical Thermal Chemical Catalytic Distillation Solvent extraction Propane deasphalting Solvent dewaxing

More information

CHAPTER 2 REFINERY FEED STREAMS: STREAMS FROM THE ATMOSPHERIC AND VACUUM TOWERS

CHAPTER 2 REFINERY FEED STREAMS: STREAMS FROM THE ATMOSPHERIC AND VACUUM TOWERS CHAPTER 2 REFINERY FEED STREAMS: STREAMS FROM THE ATMOSPHERIC AND VACUUM TOWERS About This Chapter The previous chapter introduced crude oil as a mixture of compounds. The characteristics of these compounds

More information

Coking and Thermal Process, Delayed Coking

Coking and Thermal Process, Delayed Coking Coking and Thermal Process, Delayed Coking Fig:4.1 Simplified Refinery Flow Diagram [1,2] Treatment processes : To prepare hydrocarbon streams for additional processing and to prepare finished products.

More information

Bottom of Barrel Processing. Chapters 5 & 8

Bottom of Barrel Processing. Chapters 5 & 8 Bottom of Barrel Processing Chapters 5 & 8 Gases Gas Sat Gas Plant Polymerization LPG Sulfur Plant Sulfur Alkyl Feed Alkylation Butanes Fuel Gas LPG Gas Separation & Stabilizer Light Naphtha Heavy Naphtha

More information

Alkylation & Polymerization Chapter 11

Alkylation & Polymerization Chapter 11 Alkylation & Polymerization Chapter 11 Petroleum Refinery Schematic Gasses Polymerization Sulfur Plant Sulfur Gas Sat Gas Plant Alkyl Feed Butanes LPG Fuel Gas Alkylation LPG Gas Separation & Stabilizer

More information

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah Catalytic Operations Fluidized Catalytic Cracking The fluidized catalytic cracking (FCC) unit is the heart of the refinery and is where heavy low-value petroleum stream such as vacuum gas oil (VGO) is

More information

Oil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p.

Oil & Gas. From exploration to distribution. Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir. W3V19 - Refining Processes1 p. Oil & Gas From exploration to distribution Week 3 V19 Refining Processes (Part 1) Jean-Luc Monsavoir W3V19 - Refining Processes1 p. 1 Crude Oil Origins and Composition The objective of refining, petrochemical

More information

OIL REFINERY PROCESSES

OIL REFINERY PROCESSES OIL REFINERY PROCESSES 1 Types of hydrocarbons Types of hydrocarbons (parafffins, naphthenes, and aromatics). This rating is important to the refinery since the value of the crude oil decreases from classification

More information

THE OIL & GAS SUPPLY CHAIN: FROM THE GROUND TO THE PUMP ON REFINING

THE OIL & GAS SUPPLY CHAIN: FROM THE GROUND TO THE PUMP ON REFINING THE OIL & GAS SUPPLY CHAIN: FROM THE GROUND TO THE PUMP ON REFINING J. Mike Brown, Ph.D. Senior Vice President Technology BASICS OF REFINERY OPERATIONS Supply and Demand Where Does The Crude Oil Come From?

More information

Characterization of crude:

Characterization of crude: Crude Oil Properties Characterization of crude: Crude of petroleum is very complex except for the lowboiling components, no attempt is made by the refiner to analyze for the pure components that contained

More information

Crude Distillation Chapter 4

Crude Distillation Chapter 4 Crude Distillation Chapter 4 Gases Gas Sat Gas Plant Polymerization LPG Sulfur Plant Sulfur Alkyl Feed Alkylation Butanes Fuel Gas LPG Gas Separation & Stabilizer Light Naphtha Heavy Naphtha Isomerization

More information

Co-Processing of Green Crude in Existing Petroleum Refineries. Algae Biomass Summit 1 October

Co-Processing of Green Crude in Existing Petroleum Refineries. Algae Biomass Summit 1 October Co-Processing of Green Crude in Existing Petroleum Refineries Algae Biomass Summit 1 October - 2014 1 Overview of Sapphire s process for making algae-derived fuel 1 Strain development 2 Cultivation module

More information

HOW OIL REFINERIES WORK

HOW OIL REFINERIES WORK HOW OIL REFINERIES WORK In order to model oil refineries for model railroads some research was conducted into how they operate and what products a refinery produces. Presented below is a basic survey on

More information

Preface... xii. 1. Refinery Distillation... 1

Preface... xii. 1. Refinery Distillation... 1 Preface... xii Chapter Breakdown... xiii 1. Refinery Distillation... 1 Process Variables... 2 Process Design of a Crude Distillation Tower... 5 Characterization of Unit Fractionation... 11 General Properties

More information

Lecture 3: Petroleum Refining Overview

Lecture 3: Petroleum Refining Overview Lecture 3: Petroleum Refining Overview In this lecture, we present a brief overview of the petroleum refining, a prominent process technology in process engineering. 3.1 Crude oil Crude oil is a multicomponent

More information

HOW OIL REFINERIES WORK

HOW OIL REFINERIES WORK HOW OIL REFINERIES WORK In order to model oil refineries for model railroads some research was conducted into how they operate and what products a refinery produces. Presented below is a basic survey on

More information

Refinery Maze Student Guide

Refinery Maze Student Guide Refinery Maze Student Guide Petroleum Refining Student Text Distillation In its crude form, petroleum is of little use to us. To make it into products we know and use, petroleum must be refined or separated

More information

Catalytic Reforming for Aromatics Production. Topsoe Catalysis Forum Munkerupgaard, Denmark August 27 28, 2015 Greg Marshall GAM Engineering LLC 1

Catalytic Reforming for Aromatics Production. Topsoe Catalysis Forum Munkerupgaard, Denmark August 27 28, 2015 Greg Marshall GAM Engineering LLC 1 Catalytic Reforming for Aromatics Production Topsoe Catalysis Forum Munkerupgaard, Denmark August 27 28, 2015 Greg Marshall GAM Engineering LLC GAM Engineering LLC 1 REFINERY CONFIURATION LPG NAPHTHA HYDROTREATING

More information

Annex A: General Description of Industry Activities

Annex A: General Description of Industry Activities Annex A: General Description of Industry Activities 65. The EHS Guidelines for Petroleum Refining cover processing operations from crude oil to finished liquid products, including liquefied petroleum gas

More information

HOW OIL REFINERIES WORK

HOW OIL REFINERIES WORK HOW OIL REFINERIES WORK In order to model oil refineries for model railroads some research was conducted into how they operate and what products a refinery produces. Presented below is a basic survey on

More information

Module8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS

Module8:Engine Fuels and Their Effects on Emissions Lecture 36:Hydrocarbon Fuels and Quality Requirements FUELS AND EFFECTS ON ENGINE EMISSIONS FUELS AND EFFECTS ON ENGINE EMISSIONS The Lecture Contains: Transport Fuels and Quality Requirements Fuel Hydrocarbons and Other Components Paraffins Cycloparaffins Olefins Aromatics Alcohols and Ethers

More information

CHAPTER 1 THE NATURE OF CRUDE PETROLEUM

CHAPTER 1 THE NATURE OF CRUDE PETROLEUM CHAPTER 1 THE NATURE OF CRUDE PETROLEUM About This Chapter For most of history crude oil was a nuisance. It had no widespread commercial application, although evidence for water proofing and cement can

More information

Solvent Deasphalting Conversion Enabler

Solvent Deasphalting Conversion Enabler Kevin Whitehead Solvent Deasphalting Conversion Enabler 5 th December 2017 Bottom of the Barrel Workshop NIORDC, Tehran 2017 UOP Limited Solvent Deasphalting (SDA) 1 Natural Gas Refinery Fuel Gas Hydrogen

More information

CHAPTER 3 OIL REFINERY PROCESSES

CHAPTER 3 OIL REFINERY PROCESSES CHAPTER 3 OIL REFINERY PROCESSES OUTLINE 1. Introduction 2. Physical Processes 3. Thermal Processes 4. Catalytic Processes 5. Conversion of Heavy Residues 6. Treatment of Refinery Gas Streams INTRODUCTION

More information

Crude Assay, ASTM, TBP distillations, Evaluation of crude oil properties.

Crude Assay, ASTM, TBP distillations, Evaluation of crude oil properties. Crude Assay, ASTM, TBP distillations, Evaluation of crude oil properties. Crude Oil Distillation Crude oil distillation is an open art technology. The crude oil is distilled at atmospheric pressure and

More information

Product Blending & Optimization Considerations. Chapters 12 & 14

Product Blending & Optimization Considerations. Chapters 12 & 14 Product Blending & Optimization Considerations Chapters 12 & 14 Gases Polymerization Sulfur Plant Sulfur Gas Sat Gas Plant LPG Butanes Fuel Gas Gas Separation & Stabilizer Light Naphtha Isomerization Alkyl

More information

SOLVENT DEASPHALTING OPTIONS How SDA can increase residue upgrading margins

SOLVENT DEASPHALTING OPTIONS How SDA can increase residue upgrading margins SOLVENT DEASPHALTING OPTIONS How SDA can increase residue upgrading margins ME Tech Dubai, February 18 & 19, 2014 Steve Beeston - Vice President, Technology Business Environment Requirements Improve refinery

More information

Consulting and Training Services Available to the Petroleum Industry

Consulting and Training Services Available to the Petroleum Industry Consulting and Training Services Available to the Petroleum Industry Iraj Isaac Rahmim, PhD, Inc. Houston, Texas, USA Crude Oil Quality Group Chateau Sonesta Hotel New Orleans January 2005 Products and

More information

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah Oil Products 1- Gaseous Fuels. Natural gas, which is predominantly methane, occurs in underground reservoirs separately or in association with crude oil. The principal types of gaseous fuels are oil (distillation)

More information

PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry)

PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry) PRACTICE EXAMINATION QUESTIONS FOR 1.6 ALKANES (includes some questions from 1.5 Introduction to Organic Chemistry) 1. (a) Name the process used to separate petroleum into fractions....... Give the molecular

More information

Guidance on Manufacturing Process Descriptions & Use of EINECS/CAS Number Definitions for REACH Registrations

Guidance on Manufacturing Process Descriptions & Use of EINECS/CAS Number Definitions for REACH Registrations Guidance on Manufacturing Process escriptions & se of EINECS/CAS Number efinitions for REACH Registrations January 2008 Contents Introduction... 1 8052-42-4 - Asphalt... 1 64741-56-6 - Residues (petroleum),

More information

1-3 Alkanes structures and Properties :

1-3 Alkanes structures and Properties : 1-3 Alkanes structures and Properties : The simplest family of organic molecules is the (Alkanes). Alkanes are relatively unreactive and not often involved in chemical reactions, but they nevertheless

More information

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah

Petroleum Refining Fourth Year Dr.Aysar T. Jarullah Catalytic Reforming Catalytic reforming is the process of transforming C 7 C 10 hydrocarbons with low octane numbers to aromatics and iso-paraffins which have high octane numbers. It is a highly endothermic

More information

PETE 203: Properties of oil

PETE 203: Properties of oil PETE 203: Properties of oil Prepared by: Mr. Brosk Frya Ali Koya University, Faculty of Engineering, Petroleum Engineering Department 2013 2014 Lecture no. (3): Classification of Crude oil 6. Classification

More information

Evaluation of Crude Oil

Evaluation of Crude Oil Evaluation of Crude Oil Evaluation of crude oil is important for refiner because it gives the following types of information: 1. Base and general properties of the crude oil. 2. Presence of impurities

More information

Part 4. Introduction to Oil Refining Processes

Part 4. Introduction to Oil Refining Processes Part 4 Introduction to Oil Refining Processes Iran First Refinery: Abadan Refinery (1909) Other Refineries 1 REFINERY FEEDSTOCKS The basic raw material for refineries is petroleum or crude oil, even though

More information

CONTENTS 1 INTRODUCTION SUMMARY 2-1 TECHNICAL ASPECTS 2-1 ECONOMIC ASPECTS 2-2

CONTENTS 1 INTRODUCTION SUMMARY 2-1 TECHNICAL ASPECTS 2-1 ECONOMIC ASPECTS 2-2 CONTENTS GLOSSARY xxiii 1 INTRODUCTION 1-1 2 SUMMARY 2-1 TECHNICAL ASPECTS 2-1 ECONOMIC ASPECTS 2-2 3 INDUSTRY STATUS 3-1 TRENDS IN TRANSPORTATION FUEL DEMAND 3-3 TRENDS IN ENVIRONMENTAL REGULATION 3-3

More information

360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338

360 INDEX. boiling point of gas oil components, 84 boiling range, 353 bunker fuels, 8 fuel No. 6 characteristics, 339 classification, 338 Index acidity/acid no., 351 additives aviation gasoline, 317 classification, 178 composition, 256 consumption, 182 diesel distribution, 180 diesel fuels, 179 diesel vehicle system, 181 fuels, 121, 351

More information

CUSTOMS TARIFF - SCHEDULE V - 1

CUSTOMS TARIFF - SCHEDULE V - 1 V - 1 Section V MINERAL PRODUCTS 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate

More information

Challenges and Solutions for Shale Oil Upgrading

Challenges and Solutions for Shale Oil Upgrading Challenges and Solutions for Shale Oil Upgrading Don Ackelson UOP LLC, A Honeywell Company 32 nd Oil Shale Symposium Colorado School of Mines October 15-17, 2012 2012 UOP LLC. All rights reserved. UOP

More information

Why do we study about Fuel for IC Engine? Because fuel properties affect the combustion process in engine and its operation

Why do we study about Fuel for IC Engine? Because fuel properties affect the combustion process in engine and its operation FUELS 1 Introduction 2 Why do we study about Fuel for IC Engine? Because fuel properties affect the combustion process in engine and its operation Engines are designed to run on fuels that meet certain

More information

Fischer-Tropsch Refining

Fischer-Tropsch Refining Fischer-Tropsch Refining by Arno de Klerk A thesis submitted in partial fulfillment of the requirements for the degree Philosophiae Doctor (Chemical Engineering) in the Department of Chemical Engineering

More information

oil and its derivates

oil and its derivates speech transcript Liceo Scientifico Isaac Newton oil and its derivates in accordo con il Ministero dell Istruzione, Università, Ricerca e sulla base delle Politiche Linguistiche della Commissione Europea

More information

USES FOR RECYCLED OIL

USES FOR RECYCLED OIL USES FOR RECYCLED OIL What happens to your recycled used oil? Used oil, or 'sump oil' as it is sometimes called, should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants

More information

ANALYSIS OF ENERGY USE AND CO 2 EMISSIONS IN THE U.S. REFINING SECTOR, WITH PROJECTIONS OF HEAVIER CRUDES FOR 2025 SUPPORTING INFORMATION

ANALYSIS OF ENERGY USE AND CO 2 EMISSIONS IN THE U.S. REFINING SECTOR, WITH PROJECTIONS OF HEAVIER CRUDES FOR 2025 SUPPORTING INFORMATION ANALYSIS OF ENERGY USE AND CO 2 EMISSIONS IN THE U.S. REFINING SECTOR, WITH PROJECTIONS OF HEAVIER CRUDES FOR 2025 SUPPORTING INFORMATION MathPro Inc. P.O. Box 34404 West Bethesda, Maryland 20827-0404

More information

A new simple and robust process FT-NIR Spectrometer with small footprint and extended maintenance interval

A new simple and robust process FT-NIR Spectrometer with small footprint and extended maintenance interval Thomas Buijs, Michael B. Simpson, ABB Quebec, BU MA Analytical Measurements Oil & Gas Industry A new simple and robust process FT-NIR Spectrometer with small footprint and extended maintenance interval

More information

PETROLEUM SUBSTANCES

PETROLEUM SUBSTANCES ENVIRONMENTAL SCIENCE FOR THE EUROPEAN REFINING INDUSTRY PETROLEUM SUBSTANCES WORKSHOP ON SUBSTANCE IDENTIFICATION AND SAMENESS Helsinki 7 October 2014 Foreword Petroleum Substances (PS) in the context

More information

Results Certified by Core Labs for Conoco Canada Ltd. Executive summary. Introduction

Results Certified by Core Labs for Conoco Canada Ltd. Executive summary. Introduction THE REPORT BELOW WAS GENERATED WITH FEEDSTOCK AND PRODUCT SAMPLES TAKEN BY CONOCO CANADA LTD, WHO USED CORE LABORATORIES, ONE OF THE LARGEST SERVICE PROVIDERS OF CORE AND FLUID ANALYSIS IN THE PETROLEUM

More information

Unit 1. Naphtha Catalytic Reforming. Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna

Unit 1. Naphtha Catalytic Reforming. Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna Unit 1. Naphtha Catalytic Reforming Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna Introduction Catalytic reforming of heavy naphtha and isomerization of light naphtha constitute

More information

Unit 4. Fluidised Catalytic Cracking. Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna

Unit 4. Fluidised Catalytic Cracking. Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna Unit 4. Fluidised Catalytic Cracking Assistant lecturers Belinskaya Nataliya Sergeevna Kirgina Maria Vladimirovna Introduction Catalytic cracking is the process in which heavy low-value petroleum stream

More information

MARKETS & APPLICATIONS. Elliott Turbomachinery for Refineries

MARKETS & APPLICATIONS. Elliott Turbomachinery for Refineries MARKETS & APPLICATIONS Elliott Turbomachinery for Refineries Elliott in the Refinery C 2 To LPG Facility C 3 To LPG Facility Absorber ic 4 Gas Plant nc 4 Plant Power Turbine Generator Package Refrigeration

More information

CUSTOMS TARIFF - SCHEDULE. Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES

CUSTOMS TARIFF - SCHEDULE. Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES CUSTOMS TARIFF - SCHEDULE 27 - i Chapter 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES Notes. 1. This Chapter does not cover: (a) Separate chemically

More information

Fraction Distillation of Crude Oil

Fraction Distillation of Crude Oil Fraction Distillation of Crude Oil Question Paper 2 Level A Level Subject Chemistry Exam Board AQA Module 3.3 Organic Chemistry Topic 3.3.2 Alkanes Sub-Topic 3.3.2.1 Fractional Distillation of Crude Oil

More information

PILOT PLANT DESIGN, INSTALLATION & OPERATION Training Duration 5 days

PILOT PLANT DESIGN, INSTALLATION & OPERATION Training Duration 5 days Training Title PILOT PLANT DESIGN, INSTALLATION & OPERATION Training Duration 5 days Training Date Pilot Plant Design, Installation & Operation 5 21 25 Sep $3,750 Dubai, UAE In any of the 5 star hotels.

More information

LECTURE 14 PETROCHEMICAL INDUSTRIES

LECTURE 14 PETROCHEMICAL INDUSTRIES LECTURE 14 PETROCHEMICAL INDUSTRIES Chapter 38 in Shreve s Chemical Process Industries OUTLINE 1. Introduction 2. Physical Processes 3. Thermal Processes 4. Catalytic Processes 5. Conversion of Heavy Residues

More information

PDHengineer.com. Course O Fundamentals of Petroleum Refining

PDHengineer.com. Course O Fundamentals of Petroleum Refining PDHengineer.com Course O-3001 Fundamentals of Petroleum Refining This document is the course text. You may review this material at your leisure before or after you purchase the course. If you have not

More information

Maximizing Refinery Margins by Petrochemical Integration

Maximizing Refinery Margins by Petrochemical Integration Topic Maximizing Refinery Margins by Petrochemical Integration Presented by : Rajeev Singh Global Demand for Refined Products 29% 29% 29% 29% 30% 30% 33% 10% 10% 10% 9% 8% 8% 7% 7% 7% 7% 7% 7% 7% 22% 22%

More information

Maximize Vacuum Residue Conversion and Processing Flexibility with the UOP Uniflex Process

Maximize Vacuum Residue Conversion and Processing Flexibility with the UOP Uniflex Process Maximize Vacuum Residue Conversion and Processing Flexibility with the UOP Uniflex Process Hans Lefebvre UOP LLC, A Honeywell Company XVIII Foro de Avances de la Industria de la Refinación 11 and 12, July,

More information

1 The diagram shows the separation of petroleum into fractions. gasoline. petroleum Z. bitumen. What could X, Y and Z represent?

1 The diagram shows the separation of petroleum into fractions. gasoline. petroleum Z. bitumen. What could X, Y and Z represent? 1 The diagram shows the separation of petroleum into fractions. gasoline X Y petroleum Z bitumen What could X, Y and Z represent? 2 What is not the correct use for the fraction named? name of fraction

More information

Edexcel GCSE Chemistry. Topic 8: Fuels and Earth science. Fuels. Notes.

Edexcel GCSE Chemistry. Topic 8: Fuels and Earth science. Fuels. Notes. Edexcel GCSE Chemistry Topic 8: Fuels and Earth science Fuels Notes 8.1 Recall that Hydrocarbons are compounds that contain carbon and hydrogen only 8.2 Describe crude oil as: A complex mixture of hydrocarbons

More information

Unity TM Hydroprocessing Catalysts

Unity TM Hydroprocessing Catalysts Aravindan Kandasamy UOP Limited, Guildford, UK May 15, 2017 May 17, 2017 Unity TM Hydroprocessing Catalysts A unified approach to enhance your refinery performance 2017 Honeywell Oil & Gas Technologies

More information

PCE154. Refinery Process and Products. H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E

PCE154. Refinery Process and Products. H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E PCE154 Refinery Process and Products H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: To provide broad technical information on refining

More information

International Association of Certified Practicing Engineers

International Association of Certified Practicing Engineers www.iacpe.com Knowledge, Certification, Networking Page: 1 60 November, 2016 IACPE No 19, Jalan Bilal Mahmood 80100 Johor Bahru Malaysia CERTIFIED CRUDE OIL ANALYST The International is providing the introduction

More information

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer Softening point by Ring & Ball Density and relative density of liquids by Hubbart pycnometer Distillation of petroleum Melting point of petroleum wax Precipitation number of lubricating oils Saponification

More information

PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California

PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Menlo Park, California Abstract Process Economics Program Report No. 169 REFINERY/CHEMICALS INTERFACE (January 1985) Demand for most major refinery products

More information

Supply of Services for Detailed OEB Crude Assay Analysis

Supply of Services for Detailed OEB Crude Assay Analysis Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries

More information

OIL REFINERY PROCESSES. Department of Chemistry Makerere University

OIL REFINERY PROCESSES. Department of Chemistry Makerere University OIL REFINERY PROCESSES Department of Chemistry Makerere University OUTLINE 1. 2. 3. 4. 5. 6. Introduction Physical Processes Thermal Processes Catalytic Processes Conversion of Heavy Residues Treatment

More information

Strategies for Maximizing FCC Light Cycle Oil

Strategies for Maximizing FCC Light Cycle Oil Paste Logo Here Strategies for Maximizing FCC Light Cycle Oil Ann Benoit, Technical Service Representative Refcomm, March 4-8, 2015 LCO and Bottoms Selectivity 90 Bottoms wt% 24 LCO wt% Hi Z/M Low Z/M

More information

9e Lustrum VKRT. Oils, A surprising impact on rubber. 12 November 2010,Vaals. Rogier van Hoof. General Manager Benelux

9e Lustrum VKRT. Oils, A surprising impact on rubber. 12 November 2010,Vaals. Rogier van Hoof. General Manager Benelux 9e Lustrum VKRT Oils, A surprising impact on rubber 12 November 2010,Vaals Rogier van Hoof General Manager Benelux 1 Agenda Nynas company profile Oils for rubber vs. rubber for oil Global refining trends

More information

OIL REFINERY PROCESSES. CHEE 2404 Dalhousie University

OIL REFINERY PROCESSES. CHEE 2404 Dalhousie University OIL REFINERY PROCESSES CHEE 2404 Dalhousie University OUTLINE 1. Introduction 2. Physical Processes 3. Thermal Processes 4. Catalytic Processes 5. Conversion of Heavy Residues 6. Treatment of Refinery

More information

Mini refinery feasibility study

Mini refinery feasibility study Mini refinery feasibility study Introduction The first part of any study into a mini-refinery application is an initial assessment of its economic feasibility. This requires an understanding of what a

More information

Chemical Technology Prof. Indra D. Mall Department of Chemical Engineering Indian Institute of Technology, Roorkee

Chemical Technology Prof. Indra D. Mall Department of Chemical Engineering Indian Institute of Technology, Roorkee Chemical Technology Prof. Indra D. Mall Department of Chemical Engineering Indian Institute of Technology, Roorkee Module - 6 Petroleum Refinery Lecture - 5 Catalytic Cracking Fluid Catalytic Cracking

More information

Chapter 11 Gasoline Production

Chapter 11 Gasoline Production Petroleum Refining Chapter 11: Gasoline Production Chapter 11 Gasoline Production INTRODUCTION Convert SR naphtha to motor gasoline stocks through 1. Reforming 2. Isomerization Production of motor gasoline

More information

MEG/WRI s Partial Bitumen Upgrader Project Adding Value to MEG and Alberta

MEG/WRI s Partial Bitumen Upgrader Project Adding Value to MEG and Alberta MEG/WRI s Partial Bitumen Upgrader Project Adding Value to MEG and Alberta February 2015 Presentation Format Who we are - MEG and WRI Introduction to Alberta oil sands Resource recovery, transportation

More information

PETROLEUM: CHEMISTRY, REFINING, FUELS AND PETROCHEMICALS - Petroleum: Chemistry, Refining, Fuels and Petrochemicals Refining - James G.

PETROLEUM: CHEMISTRY, REFINING, FUELS AND PETROCHEMICALS - Petroleum: Chemistry, Refining, Fuels and Petrochemicals Refining - James G. PETROLEUM: CHEMISTRY, REFINING, FUELS AND PETROCHEMICALS -REFINING James G. Speight 2476 Overland Road,Laramie, WY 82070-4808, USA Keywords: Dewatering, desalting, atmospheric distillation, vacuum distillation,

More information

Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist

Crude Assay Report. Crude Oil sample marked. Barrow Crude Oil. On Behalf Of. Chevron Australia Pty Ltd. Laboratory Supervisor. Crude Assay Chemist Crude Assay Report on Crude Oil sample marked Barrow Crude Oil On Behalf Of Chevron Australia Pty Ltd. Reported by: Approved by: Michelle Fernandez Laboratory Supervisor Jhonas Fernandez Crude Assay Chemist

More information

exactly the same savings in investment cost much faster overall construction profitability

exactly the same savings in investment cost much faster overall construction profitability WHY MODULAR? For 37 years, modular equipment has been manufacturing and delivering to customers. Modular construction is, in our opinion, the best way to build an oil refinery, particularly in capacities

More information

Types of Oil and their Properties

Types of Oil and their Properties CHAPTER 3 Types of Oil and their Properties Oil is a general term that describes a wide variety of natural substances of plant, animal, or mineral origin, as well as a range of synthetic compounds. The

More information

(A) Herbal plants (B) Used vegetable oils (C) LSHS (D) Bagasse 04. Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil 05. A fuel oil

More information

Renewable Liquids as Steam Cracker Feedstocks

Renewable Liquids as Steam Cracker Feedstocks PERP/PERP ABSTRACTS 2010 Renewable Liquids as Steam Cracker Feedstocks PERP 09/10S12 Report Abstract October 2010 Report Abstract Renewable Liquids as Steam Cracker Feedstocks PERP 09/10S12 October 2010

More information

Petroleum Refining Overview

Petroleum Refining Overview Petroleum Refining Overview Topics Energy consumption & petroleum s place Size of U.S. industry Major refiners Petroleum products Basic petroleum economics Trends for crude oil & gasoline prices When do

More information

TYPES OF BLENDING PROCESS

TYPES OF BLENDING PROCESS SYSTEMS LTD Blending operations became a major strategy as an answer to the ever-growing competitions between refineries. The strategy of blending crude oils and refinery products is to increase refining

More information

Basics of Market Fundamentals. March 7, 2007

Basics of Market Fundamentals. March 7, 2007 Basics of Market Fundamentals March 7, 2007 2 Crack Spreads Overview Definition The price difference between a barrel of product and a barrel of feedstock Also called indicator margin, differential, crack,

More information

I-4 : lp : ISO : Isomer :

I-4 : lp : ISO : Isomer : Contents I... 2 I-4 :... 2 ILMA :... 2 ILSAC :... 2 Inhibitor :... 2 Internal Combustion Engine :... 2 lp :... 2 ISO :... 2 ISO viscosity classification system :... 2 Isomer :... 2 Isooctane :... 2 Isoparaffin

More information

Recycle and Catalytic Strategies for Maximum FCC Light Cycle Oil Operations

Recycle and Catalytic Strategies for Maximum FCC Light Cycle Oil Operations Recycle and Catalytic Strategies for Maximum FCC Light Cycle Oil Operations Ruizhong Hu, Manager of Research and Technical Support Hongbo Ma, Research Engineer Larry Langan, Research Engineer Wu-Cheng

More information

Fuel Related Definitions

Fuel Related Definitions Fuel Related Definitions ASH The solid residue left when combustible material is thoroughly burned or is oxidized by chemical means. The ash content of a fuel is the non combustible residue found in the

More information

Refinery / Petrochemical. Integration. Gildas Rolland

Refinery / Petrochemical. Integration. Gildas Rolland Refinery / Petrochemical Integration Gildas Rolland 1 Global Middle Eastern Market 2 nd ~30% 10ppm Growing market for global Refined Product Demand +1.6% AAGR 2014-2035 of worldwide refining capacity expansion

More information

Gaseous fuel, production of H 2. Diesel fuel, furnace fuel, cracking

Gaseous fuel, production of H 2. Diesel fuel, furnace fuel, cracking ALKANES Introduction Hydrocarbons, as the name implies are compounds whose molecules contain only carbon and hydrogen. They are extracted from petroleum, natural gas and coal. Straight chain alkanes take

More information

Schwechat Refinery Visit

Schwechat Refinery Visit Schwechat Refinery Visit Thomas Gangl SVP Refining & Petrochemicals Vienna, Austria November 7, 2018 OMV Aktiengesellschaft Safety is our top priority Process safety 1 1.0 0.8 0.6 0.4 Concawe 1st quartile

More information

The Role of a New FCC Gasoline Three-Cut Splitter in Transformation of Crude Oil Hydrocarbons in CRC

The Role of a New FCC Gasoline Three-Cut Splitter in Transformation of Crude Oil Hydrocarbons in CRC 8 The Role of a New FCC Gasoline Three-Cut Splitter in Transformation of Crude Oil Hydrocarbons in CRC Hugo Kittel, Ph.D., Strategy and Long Term Technical Development Manager tel. +0 7 80, e-mail hugo.kittel@crc.cz

More information

Development of the CONCAWE SCEDs Arlean Rohde, CONCAWE

Development of the CONCAWE SCEDs Arlean Rohde, CONCAWE Development of the CONCAWE SCEDs Arlean Rohde, CONCAWE ENES4, Helsinki, 16-17 May 2013 Outline What are petroleum substances? Which petroleum substances are sold for consumer uses? And what do these uses

More information

Technology Development within Alternative Fuels. Yves Scharff

Technology Development within Alternative Fuels. Yves Scharff Technology Development within Alternative Fuels Yves Scharff 1 Agenda Introduction Axens and Alternative Fuels Axens Renewable Iso-paraffins Route 2 Why Alternative Fuels? Environmental Regulation By 2020,

More information

Hydroprocessing: Hydrotreating & Hydrocracking. Chapters 7 & 9

Hydroprocessing: Hydrotreating & Hydrocracking. Chapters 7 & 9 Hydroprocessing: Hydrotreating & Hydrocracking Chapters 7 & 9 Gases Gas Sat Gas Plant Polymerization LPG Sulfur Plant Sulfur Alkyl Feed Alkylation Butanes Fuel Gas LPG Gas Separation & Stabilizer Light

More information

Once a waste of lamp oil production

Once a waste of lamp oil production Refinery All processes and activities described so far happened on the upstream side. he next step to convert crude to e.g. gasoline is happening on the downstream side in refineries. olie 1 Once a waste

More information

Challenges and Opportunities in Managing CO 2 in Petroleum Refining

Challenges and Opportunities in Managing CO 2 in Petroleum Refining Challenges and Opportunities in Managing CO 2 in Petroleum Refining Theresa J. Hochhalter ExxonMobil Research & Engineering Fairfax, VA GCEP Workshop on Carbon Management in Manufacturing Industries STANFORD

More information

Oil Refinery Processes Process Engineering Associates Llc

Oil Refinery Processes Process Engineering Associates Llc Oil Refinery Processes Process Engineering Associates Llc We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer,

More information

STUDIES ON FUSHUN SHALE OIL FURFURAL REFINING

STUDIES ON FUSHUN SHALE OIL FURFURAL REFINING Oil Shale, 2011, Vol. 28, No. 3, pp. 372 379 ISSN 0208-189X doi: 10.3176/oil.2011.3.02 2011 Estonian Academy Publishers STUDIES ON FUSHUN SHALE OIL FURFURAL REFINING G. X. LI, D. Y. HAN *, Z. B. CAO, M.

More information