CAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
|
|
- Claire Spencer
- 5 years ago
- Views:
Transcription
1 063 LOCK ø DD-CC ZAAK - CHROE DD-CC ZAAK - BLACK COATED DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast zinc alloy or with polyamide housing Electric panels, machinery covers or PA6 GR 30 or Plastic 063 Plastic 2 No finish 0 SPECIICATIONS DD aster System 04 CH751 (Stainless steel dust cap) 07 or cams please check pages:
2 SPRING LOCK 163 LH RH ø Spring-loaded cam provides depress-to-lock action Distance between inside of lock face and front of cam fixed at 24 mm There is no IP 65 version of this lock,due to spring loaded cam Electric panels, machinery covers : Left hand LH Right hand RH SPECIICATIONS DD aster System 04 CH751 (Stainless steel dust cap tel fax
3 261 KNOB LOCK Clip fixing for easy assembly ounting nut not required Special 20 mm x 26 mm cut out No IP 65 version of this lock 1.8 mm maximum panel thickness Clips to fix Electric panels, machinery covers Polyamide DIN-EN ISO PA6 GR 30 or Plastic DT in ax 0.8 mm 1.8 mm DT Door Thickness SPECIICATIONS DD aster System 04 CH751 (Stainless steel dust cap 07 or cams please check pages:
4 LOCK WING KNOB 065 ø Stainless steel version: page 446 Quarter-turn operation Available in all die-cast zinc alloy or with polyamide wing knob and housing Optional blind version DD-CC ZAAK CHROE DD-CC ZAAK BLACK COATED DD-CC PLASTIC Electric panels, machinery covers or Plastic 065 No cylinder 00 Plastic 2 No finish 0 or cams please check pages: SPECIICATIONS DD No cylinder 00 aster System 04 CH751 (Stainless steel dust cap) tel fax
5 165 INI LOCK WING KNOB ø 45º cut out DD-CC ZAAK CHROE DD-CC ZAAK BLACK COATED Quarter-turn operation Available all die-cast zinc alloy Suitable for small cabinets Electric panels, machinery covers KNOB: SPECIICATIONS DD or cams please check page:
6 LOCK T HANDLE 110 IP 65 ø Stainless steel version: page 444 Quarter-turn operation Available in all die-cast zinc alloy or with polyamide wing handle and housing Optional blind version DD-CC ZAAK CHROE DD-CC ZAAK BLACK COATED DD-CC PLASTIC Electric panels, machinery covers or Plastic No cylinder 00 or only IP 65 Plastic 2 No finish 0 SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 or cams please check pages: tel fax
7 111 LOCK L HANDLE ø DD-CC ZAAK CHROE DD-CC ZAAK BLACK COATED DD-CC PLASTIC Stainless steel version: page 445 Quarter-turn operation Available in all die-cast zinc alloy or with polyamide wing handle and housing Optional blind version Electric panels, machinery covers or Plastic No cylinder or only IP 65 Plastic 2 No finish 0 SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 or cams please check pages:
8 LOCK T HANDLE 064 D T LH ø or soundproof or isolated doors Supplied with adapter suitable to standard housing Available in all die-cast zinc alloy or with polyamide wing handle and housing Optional blind version DT-1-1-DD-CC ZAAK CHROE DT-1-2-DD-CC ZAAK BLACK COATED DT-2-0-DD-CC PLASTIC Electric panels, machinery covers or Plastic No cylinder D T HANDLE DOOR THICKNESS Plastic 2 No finish 0 or cams please check pages: SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) tel fax
9 064 LOCK L HANDLE D T LH ø DT-1-1-DD-CC ZAAK CHROE DT-1-2-DD-CC ZAAK BLACK COATED DT-2-0-DD-CC PLASTIC Primarily for soundproof or isolated doors Supplied with adapter suitable to standard housing Available in all die-cast zinc alloy or with polyamide wing handle and housing Optional blind version Electric panels, machinery covers or Plastic D T No cylinder 00 HANDLE DOOR THICKNESS Plastic 2 No finish 0 SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 or cams please check page:
10 COPRESSION LOCK T HANDLE 240 IP 65 Used for cabinets require better sealing under vibrating conditions Provides 6 mm of compression Provides noise isolation Standard cams without stopper required for these locks :1 :3 Railway applications, construction equipment, electric panels, machinery covers HANDLE: Chrome or black coated Standard Cut Out Attention Special Cut Out ERSION SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 or cams please check pages: tel fax
11 240 COPRESSION LOCK T HANDLE IP 65 KNOB CH CL H GRIP IN AX :2 :4 or the cabinets that require better sealing under vibrating conditions Provides 6 mm of compression Wide grip range with adjustable screw Provides noise isolation Three cam alternatives available Standard Cut Out Attention Special Cut Out Railway applications, construction equipment, electric panels, machinery covers HANDLE: Chrome or black coated ERSION 060 A3 IXING DEICE SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 Can be ordered separately 225
12 340 COPRESSION LOCK WING KNOB KNOB CH CL H GRIP IN AX Padlock application or the cabinets that require better sealing under vibrating conditions Lock provides 6 mm of compression Wide grip range with adjustable screw Provides noise isolation Three cam alternatives available :2 Standard Cut Out Attention :4 Special Cut Out Railway applications, construction equipment, electric panels, machinery covers KNOB: Chrome or black coated ERSION or padlock only 060 A3 IXING DEICE SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 Can be ordered separately 227
13 COPRESSION LOCK WING KNOB 340 Used for cabinets that require better sealing under vibrating conditions Provides 6 mm of compression Provides noise isolation Standard cams without stopper required for these locks 1 Padlock application Railway applications, construction equipment, electric panels, machinery covers :1 :3 KNOB: Chrome or black coated Standard Cut Out Attention Special Cut Out ERSION or padlock only SPECIICATIONS DD No cylinder 00 CH751 (Stainless steel dust cap) 07 or cams please check pages: tel fax
14 LOCK 050 KEY ROTATION ANGLE GROUP :1 12 Nut 2 Briefcases, steel drawers, machinery covers KEY ROTATION ANGLE GROUP Chrome plated :2 12 Nut ERSION or cams please check page: 149 SPECIICATIONS DD Stainless steel dust cap (1000 Keyed differ) tel fax
15 050 LOCK KEY ROTATION ANGLE GROUP 1 Wooden and steel cupboard Chrome plated 050 LH HOUSING LENGTH SPECIICATIONS DD Stainless steel dust cap (1000 Keyed differ) 32 or cams please check page:
16 LOCK 150 Non removable key KEY ROTATION ANGLE GROUP 5 Bolt Designed for polyester cabinets ery low profile head Please note special shape of mounting hole Polyester cabinets and steel cabinets Chrome plated HOUSING LENGTH SPECIICATIONS DD Stainless steel dust cap (1000 Keyed differ) 32 or cams please check page: tel fax
17 250 LOCK KEY ROTATION ANGLE GROUP 5 Bolt Briefcases, steel drawers, machinery covers Chrome plated HOUSING LENGTH SPECIICATIONS DD Stainless steel dust cap (1000 Keyed differ) 32 or cams please check page:
18 INI LOCK 057 :1 ixed by nut KEY ROTATION ANGLE Keyed differ has maximum 100 key combination etal drawers, metal cabinets, post boxes Chrome :3 ixed by clips KEY ROTATION ANGLE 057 ERSION SPECIICATIONS DD or cams please check page: tel fax
19 157 INI LOCK DT ixed by clips KEY ROTATION ANGLE Suitable for both steel and aluminium profile Thickness: 0.7 mm etal drawers, metal cabinets, post boxes, aluminium profiles STOCK CODE CH CL LH:9.5 H Hook cam (CC: 29) DOOR THICKNESS ERSION mm thickness panel mm thickness panel ERSION SPECIICATIONS DD 233
20 INI LOCK 257 Easy assembly with clips on housing etal drawers, metal cabinets, plastic boxes Chrome Polyamide DIN-EN ISO PA6 GR 30 KEY ROTATION ANGLE 45 STOCK CODE CH CL LH:9.5 H Hook cam (CC: 29) 257 SPECIICATIONS DD 234 tel fax
21 056 LOCK High-security lock Unique key combination available Two different housing lengths (18 mm and 25 mm) or different cam alternatives contact Essentra etal cabinets, post boxes NUT: Brass Brass 056 H GRIP SPECIICATIONS DD Stainless steel dust cap (Keyed alike) 01 Stainless steel dust cap (Keyed differ) 02 or cams please check page:
LH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)
107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to
More informationSTEEL CUPBOARD LOCKS FIRE-HOSE CABINET LOCK
013 IRE-HOSE CABINET LOCK Designed for fire-hose cabinet Special fixing plate supplied for easy fixing lush design provides flat surface on cabinet Customized colours available ire hose cabinet BODY: KNOB:
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationQuarter-Turn Pr20.1 L18
1-100.01 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which
More informationStainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationSwing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
More informationACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN
ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133
More informationB2082. Swing Handles - with Rod Control 40mm euro cylinder lock - dust cover - zinc or polyamide. wixroyd.com
40mm euro cylinder lock - dust cover - zinc or polyamide B2082 Type One: Body & Handle: die cast zinc, black Type Two: Body: Polyamide PA6, black. Handle: die cast zinc, black Order No. Type Body Handle
More informationH3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationHandbook for Industrial Applications CATALOGUE SUPPLEMENT 2016 / Locks Latches Handles Hinges Sealing profiles Miscellaneous Stainless products
Handbook for Industrial Applications CATALOGUE SUPPLEMENT 0 / 07 Locks Latches Handles Hinges Sealing profiles Miscellaneous products CONTENT ONE PHILOSOPHY. MANY SOLUTIONS. About Industrilas Page - WWW:
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationLocking System. White Paper
Locking System White Paper Contents Introduction...4 Easy Integration...4 Benefits...4 Floor standing Mild steel...5 Floor standing Stainless steel... 10 Floor standing Aluminum... 15 Wall mounted Mild
More informationROUND RODS. Espagnolette round and flat rod applications and accessories. 178 tel fax FLAT-ROD APPLICATIONS
ROUND RODS Espagnolette round and flat rod applications and accessories IC IL ROUND-ROD APPLICATIONS FLAT-ROD APPLICATIONS Gear box Gear box Espagnolette cam Rod adapter (CT) Round-rod guide (CY) Flat-rod
More informationLocks. Product range:
Locks Product range: Coin Locks Combination Locks Espagnolette Locks Keys Lay on Locks Locks for Metal Furniture Lock Strikers Mortise Locks Padlock Handle Pedestal Locks Removable Cylinder Locks Rim Locks
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationCAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationCams, Latches & Locks
a Keys & Cams Rod Latching Systemss Cam Latches Compression Latches Cam Locks Cams, Latches & Locks b ov-cam-latches-&-locks-divider - Updated - 12-01-2017 d 1 d 2 Cam Latches, Locks & Swing Handles
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More information1-103 Slide Shoe for Cams
1-103 Slide Shoe for Cams Slide shoe for cams, 2 parts, consisting of housing and latch. Matching cams as of 35 mm, steel product system 1.102 and stainless steel product system 7-080, in combination with
More informationFURNITURE & CABINET LOCK
FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"
More informationMH3. Door Stops (Floor Mounts) Door Stops (Wall Mounts) Door Holders (Door Mounts)
CH-202NS...MH20 DB-008...MH11 DB-036a...MH11 DC-011...MH23 DC-018...MH21 DC-063...MH23 DC-070...MH12 DG-106N...MH21 DG-109...MH21 DG-110...MH21 DG-111...MH21 DP-042...MH23 DP-042L...MH23 DS-003...MH 4
More informationMultiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationProduct Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationLOCKS. Lock Cylinder and Keys. Installation. Removal. Key to Differ. Keyed Alike
PAGE 264 Lock Cylinder & Keys 265 Keys 266 Door and Drawer 270 Multi Drawer 272 Flat Multi Drawer 273 Anti Tilt 275 Double Door 276 Large Door 278 Sliding Door 278 Roller Shutter 279 Glass Door 281 Glass
More informationProduct Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More information. Ball catch and counterpart: brass or brass, chrome plated
www.dirak.com 6-130 Dual Ball Catch Material:. Ball catch and counterpart: brass or brass, chrome plated. Spring: stainless steel Ball: stainless steel chrome Ball catch Counterpart Assembly brass plated
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationHandle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
More information10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More informationLocks and handles 19
19 19 25074 Complete CYLINDER LOCK : 1.47 kg : Complete cylinder lock with black outside plating. Including 3 keys and 2 brackets. Stroke: 50mm. 25147 EURO PROFILECYLINDER : 0.22 kg : Suitable for article
More informationP r e l i m i n a r y. Digital cylinder with 17 mm Euro profile. 1435MID/options. Kaba digital cylinder. Digital cylinder with 17 mm Euro profile
Digital cylinder with 17 mm Euro profile Kaba digital cylinder Description The digital locking cylinder is fitted with a Mifare reader antenna on the knob. The security-relevant electronics are installed
More informationHinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Rod Controls Locking Systems
Rod Controls Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression
More informationargenta opening doors
Door and window fittings Content Table of contents Introduction... 03 Window restrictors... 04 Window handles for aluminium frames... 06 Window handles for wooden frames... 07 Window handles for PVC frames...
More informationMOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 pumps
PUMPMASTER 2 oil pumps MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 pumps Kg. 000 000 Iquip iriuscidunt nosand niammeters ver ip fluidmodit dispense guns control valves for oil......................................................
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationD-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
More informationKin Kei Hardware Industries Limited
Kin Kei Hardware Industries Limited E-mail: kinkei@hardware.com.hk Website: www.hardware.com.hk Rim Cylinder Euro Cylinder Mortise Cylinder VOLAR 1 INDEX A) Cylinder 1) Euro Profile Cylinders a) Yale Keyway
More informationCut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L LOCKS
111 112 Cut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L C L C L C L C L C L C L C L C L 113 C L PRODUCT NUMBER T1 T2 T3 V1 W1 EWTC140, EWTP140 WTC140, WTP140 UES052047 X UES052048
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationTECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More informationAC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
More informationsection section eclipse series2 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15
vision & style section eclipse series INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15 No. ECL-750-KP9 Patent pending No. ECL-750-KP9
More informationC-Rail Festoon track systems
C-Rail Festoon track systems & Hose carrying systems Application C-Rail festoon track systems are the ideal solution for carrying cables supplying power to many types of moving machinery using either flat
More informationWeld-on Hinges Weld-on Hinges
54 53 Weld-on Hinges 7004.00 Satin Brass Washer Pin Grease Nipple Weld-on Hinges 7004.90 Aluminium Satin Stainless Washer Stainless Pin Grease Nipple 55 Weld-on Hinges 7005.00.080, 7005.00.100 Satin Brass
More informationAccessories. The extensive accompaniment for glass doors.
The extensive accompaniment for glass doors. CONTENTS Materials and surface finishes 138 Product information Door rails 139-140 Door holders 141 Hinges - special applications 142 Door stop and strike plates
More informationHINGES Weld-on Hinges Steel. Weld-on Hinges Steel. MATERIAL Steel. FINISH Raw. FEATURES Brass Washer Steel Pin Grease Nipple
47 48 Weld-on Hinges 7004.00 Raw Brass Washer Pin Grease Nipple Weld-on Hinges 7010.00 Raw Brass Washer Pin 49 Weld-on Hinges 7005.00.080, 7005.00.100 Raw Brass Washer Brass Pin Grease Nipple 7005.00.080
More informationRack and Pinion Actuator BR 31a Typ SRP und DAP
Forged stainless steel Rack and Pinion Actuator BR 31a Typ SRP und DAP Application: The stainless steel actuators are a corrosion resistant rack and pinion actuator particular engineered for corrosive
More informationXMR & XMSR Modular Key Exchange Units with Rotary Switches
page 1 of 9 Product Data Sheet XMR & XMSR Modular Key Exchange Units with Rotary Switches Description The XMR and XMSR (full stainless steel version) are modular key exchange units. These units are fitted
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationLocking and Security Information
Information Profile cylinder Locking cylinders are catergorized according to a) Front view b) Side view Profile cylinder Double cylinder Single cylinder Thumbturn cylinder The definition of important components
More informationQuarter turns. Quarter turns J-1
Quarter turns Further materials and surface finishes on demand. We will be pleased to give you advice. J-1 Quarter turns Quarter-turns have been inserted in the most varied technical ranges, because of
More informationSLIDING DOOR SYSTEM MIR SS-304
SLIDING DOOR SYSTEM MIR SS-304 Application Material: Stainless steel 304. Glass thickness: 8-10 mm Max load capacity: 120 KG. 1 Set for door width 960-1060 mm consists of: 1 x Tube Ø 25 x 2050 mm. 2 x
More informationOne-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
More informationDoor Hinges Concealed Hinges
Concealed mortise hinge For installation in wall recesses For flush wooden or metal doors Suitable for DIN left hand and DIN right hand Certified for fire resistant and smoke control doors in compliance
More informationTERMS and CONDITIONS
TERMS and CONDITIONS Hour of operation ( mountain standard time ) 8.00 AM to 12.00 PM 12.30 PM to 4.30 PM Monday to Friday Terms of Payment Net 30 days from date of invoice - The seller reserves the right
More informationLOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy
118 117 Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES
More informationIndustrial Applications
Industrial Applications M Industrial Applications TESA catalogue 1 Locking solutions for Industrial Applications The monitoring of the opening and locking of doors does not only apply to the access to
More informationStandard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
More informationAll directions given in this book are as seen from the operator s position at the rear of the machine.
Service Manual S12, S16 S12cc Upright Vacuum READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationTABLE OF CONTENTS PRODUCT PART # PAGE PRODUCT PART # PAGE
TABLE OF CONTENTS PRODUCT PART # PAGE CABINET LOCKS Pin Tumblers 0737 3 0738 3 0370B 4 Disc Tumblers 02067 4 Combination D900, D901 39 CAM LOCKS Pin Tumblers 15748, 15749, 15750 10 15783 & 15890 11 C-510-XS
More informationScrew-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
More informationLED Universal Three-Stud Combination Tail Light 16pcs Super flux LED 12V or 24V Material:Acrylic lens, black ABS base 12pcs/2.37 N.W.7.
SAE Multiple Purpose Light 0071-0282 LED Universal Three-Stud Combination Tail Light 16pcs 12pcs/2.37 N.W.7.5kg, version of plug at side 0075-12V 0075-24V 0076-12V 0076-24V 0077-12V 0077-24V, version of
More informationSISO A/S MILEPARKEN 11 DK SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+45) FAX: (+45) DISTRIBUTOR
The technical descriptions and dimensions in this catalogue, also those the photographs and drawings, are not binding. We reserve the right to make design improvements. We bear no liability for any misprints
More informationBifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationPNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
More informationAFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
More informationBRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: Fax: PRODUCT GUIDE
BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: 01406 351249 Fax: 01406 351658 PRODUCT GUIDE SECURITY - PADLOCKS, LOCKS, CHAINS AND CHAIN FITTINGS CONTENTS PAGE 1 PADLOCKS PAGE 1 PAGE 2 PADLOCKS PAGE 2 PAGE
More informationSLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
More informationInternationally approved.
E X - M A N U A L M O T O R S T A R T E R S Up to 2 A Motors have to be protected against over loads, phase failures and overheating: CEAG s power circuit breaker and manual motor starter features phase-failure
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationMETLAM PARTITION HARDWARE. Metlam Partition Hardware. > Washroom Hardware & Accessories
METLAM PARTITION HARDWARE Metlam Partition Hardware > Washroom Hardware & Accessories Metlam Proud to be Australian Owned Metlam is proud to be Australian owned and managed. Formed in the mid 1990 s, it
More informationCOMPETENCE COMPONENTS FOR HVAC APPLICATIONS: SYSTEM SOLUTIONS! NEW DEVELOPMENTS
COMPETENCE COMPONENTS FO HVC PPLICTIONS: SYSTEM SOLUTIONS! The Klimaflex line of products is designed for HVC applications, fulfilling the strict requirements for housings of air conditioning, ventilation
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationActuators for air dampers and control valves of oil burners
7 812 Actuators for air dampers and control valves of oil burners SQM1... SQM2... Reversible electromotoric actuators Torques: - SQM1... up to 10 Nm - SQM2... up to 20 Nm Running times: - SQM1... 14...100
More informationPre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
More informationBall Valves with Electrical Actuator Screw-on and Flange Connection, Weld Ends
Ball Valves with lectrical Actuator Screw-on and Flange onnection, Weld nds measuring monitoring analysing pmax. PN 6 tmax. +60 onnections: screw thread / to / weld ends 5 to 50 flanges 5 to 50 V D, 30
More information