TABLE OF CONTENTS PRODUCT PART # PAGE PRODUCT PART # PAGE

Transcription

1 TABLE OF CONTENTS PRODUCT PART # PAGE CABINET LOCKS Pin Tumblers B 4 Disc Tumblers Combination D900, D CAM LOCKS Pin Tumblers 15748, 15749, & C-510-XS & C-510-S 12 C520L 12 Disc Tumblers 15751, 15752, 15753, D 15 C1091A 15 Cam Lock Accessories 16 Bent Cams A 17 Hook Cams K6L A N 17 Offset Cams C3S/C5S 17 C3L/C5L 17 C4S/C6S 17 C4L/C6L E 17 Straight Cams C2S 17 C2L 17 S EA EB EC ED 17 CAM LOCKS - KEYLESS COMBINATION CK2113, CK3113, CK CATCHES CATCHES-DRAW PULL 834, 834S, 834U , 642, 643, 643W , 0797, 797W , 250W 31 CATCHES-MULTIPURPOSE SUITCASE CHEST LOCKS Pin Tumblers DISPLAY BOARDS 48 DRAWER LOCKS Pin Tumblers 0666 & / Disc Tumblers & / & / PRODUCT PART # PAGE ENCLOSURE LOCKS Pin Tumblers Warded Construction R357SGS 20 R557SGS 20 Disc Tumblers & & HANDLES Disc Tumblers 1000 Series Series HANDLES-PULL S HUSKI PADLOCKS Disc Tumbler - Rekeyable 66 Series 41 66R, 66KR 41 KEY BLANKS 47 KEYING KITS & PARTS 46 PADLOCKS & CHAINS Pin Tumblers , 178A Series Series 44 PRESTOLOCK COMBINATION PADLOCKS SEARCHALERT COLLECTION K6430, K7400, K7470, K7450, K8470 Series , , PRESTOLOCK COUNTERTOP DISPLAYS 40 SESAMEE PADLOCKS PCW K436, K437, K440, K500 Series 33 AB SLIDING DOOR LOCKS Pin Tumblers SLIDING DOOR LOCKS-PUSH & TURN Pin Tumblers Disc Tumblers SPECIAL PURPOSE LOCKS Disc Tumblers 2060N & 2060C 18 S2060NC & S2060GF 18 STRIKES 7S, 12S, 21S, 26S, 49S, 52S, 69S, 100S, SUPER SESAMEE TM PADLOCKS K636, K637, K646 Series 33

2 POLICY AND TERMS PATENT INDEMNITY We agree to defend any suit or proceeding brought against our customers so far as based on a claim that any of our products, or any part thereof, made solely to our specifications and furnished to our customer constitute an infringement of any U.S. Patent, if notified in writing and given authority, information and assistance at our expense for the defense of same, and we shall pay all damages and costs awarded therein against our customer. In case our products, or any part thereof, are in such suit to constitute infringement and their use as enjoined, we will at our expense and discretion, either procure for our customer the right to continue using the products or replace the same with non-infringing products, or modify them so they become non-infringing, or remove such products and refund the purchase price (less depreciation, prorated from the purchase date). The foregoing states our entire liability for patent infringement by our products or any part thereof. LIMITED WARRANTY We warrant our products against defects in workmanship, material or operation subject, of course, to ordinary wear and tear as it pertains to particular installations. However, we do not warrant against defects due to improper installation or failure to exercise normal maintenance, nor against the consequences of uses for which our products were not designed. Our only liability whether in tort, or in contract under this warranty or any express or implied warranty, is to repair or replace products which are returned to us, shipping charges prepaid, at the address below within one year after or delivery thereof to the original purchaser from us, and are determined by us to be defective. We expect that our customer will inspect these products upon receipt. If damage has resulted from shipment, or customer's only remedy is by claim against the carrier. Products will not be accepted for repair or replacement under this warranty unless we have given prior authorization for their return. Upon receipt of products returned for repair or replacement we will determine whether products qualify for repair or replacement under this warranty; if they do not, we will notify our customer of estimated costs of repair or replacement involved and will obtain authorization prior to proceeding. We have no liability to pay any costs of repairs performed by anyone other than us, unless in each instance we have given prior written approval of such repair in which case we will pay what we consider to be the reasonable cost thereof. CCL will warrant that at the time of delivery, its products will be free from defects in material and workmanship, and shall be liable only to the extent of replacement of locks. This warranty will NOT include labor or installation. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES. IMPLIED WARRANTIES SHALL BE LIMITED TO THE DURATION OF THE WARRANTY PERIOD OF THIS EXPRESS WARRANTY. WE SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OF EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. FREIGHT POLICY All goods are invoiced F.O.B. shipping point. When delivered to the transportation company, shipments become the property of the purchaser who assumes the risk of loss or damage in transit. COMPANY POLICY No CCL product or part can be returned for credit unless written or verbal authorization has been given in advance. Merchandise returned must be identified as to original date of purchase, purchase order number, and shipper's name and address. Service and handling charge is 25% of net billing price, except in case of defective parts. Merchandise returned in unsalable condition will not be acceptable. The return of obsolete, discontinued, modified, or special parts is not permissible. CCL reserves the right to charge for all work completed or materials purchased when an order is cancelled or reduced prior to shipment, where special or modified parts are involved. CCL reserves the right to assess an additional cancellation charge, other than the normal 25% handling charge, in the event the quantity cancelled is in excess of our normal stock requirements. Prices are subject to change in the event the purchaser receives original order quantity. CLAIMS: CCL will not be responsible for goods lost in transit. Purchaser is solely responsible for filing claims with the carrier for losses. Claims for shortages in shipment not chargeable to the carrier must be reported within ten (10) days from receipt of merchandise. FINISHING SYMBOLS US3 Bright Brass US26D Satin Chrome Plated US4 Satin Brass US2G Zinc Plated US10 Satin Bronze PS Plain Steel US14 Bright Nickel PSS Plain Stainless Steel US26 Bright Chrome Plated 2 CCL SECURITY PRODUCTS Fax:

3 CABINET LOCKS Pin Tumbler 0737 CABINET LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Brass Cylinder Operation: Bolt moves right and left for either hand door Strike: No. 2540, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Brass Regular Also Available Changes Key Blank No. 7 8" 3/4", 1 1 8", 1 3 8" All Different 8618C SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - 4T / /8" KA - 4T / /4" * /8" /8" /8" * Available in R1 keyway only DRAWER LOCKS Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Brass Cylinder Operation: Bolt moves up and down Strike: No. 2540, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 3/4", 1 1 8", 1 3 8" All Different 8618C SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - 4T / /4" * /8" /8" /8" * Available in R1 keyway only. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made-To-Order items are shaded. For explanation of finishing symbols, refer to Page 2. 3

4 CABINET LOCK Pin & Disc Tumbler 0370B CABINET LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All brass Regularly furnished right hand. Left hand available if specified when ordered. Strike: No. 12S, brass US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 8618C-R1 (5 Pin) HALF MORTISE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4* Qty. (lbs./ oz.) 0370B 7/8" * Minimum order 500 pieces CABINET LOCK Disc Tumbler Can be Masterkeyed Material: Brass Plated Steel Backplate & Bolt, Pressure Cast Cylinder Operation: Reversible for either hand door Rekeying: Plug removal access hole added to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert end of small tool (e.g., paper clip) into access hole and depress retainer while pulling key and plug out. Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7/8" 3 4", 1 1 8" JVR (5 Disc) KS (5 Disc) JVR (6 Disc) KS (6 Disc) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) /4" KA - CAT / /8" KD / /8" KA - CAT / /8" CAT / /8" AUE / /8" MKY M8003(KD) / /8" KD / /8" KA - CAT / /8" CAT / /8" KD / /1/8" KA - CAT / /8" CAT / /1/8" KA - CAT / /4" /8" /8" 4 CCL SECURITY PRODUCTS Fax:

5 No Dead Bolt 0666 & /2 DRAWER LOCK Pin Tumbler Can be Masterkeyed No /2 Latch Bolt DRAWER LOCKS Pin Tumbler Keyways Available: R1 & CR Material: All Brass Strike: No. 12S, brass, US4 only, furnished only when ordered with lock 0666 Strike: No. 100S, brass, US4 only, regularly furnished with lock /2. Key can be removed in either locked or unlocked position on 0666 only. For key retaining, specify 0666K on order. For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" All Different 8618C-R1 (5 Pin) 3 4" All Different 8632C-R1 (4 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - 4T / /8" /2-7/8" KD / /2-7/8" KA - 4T / /2-7/8" * Minimum order 250 pieces (R1 keyway only) ** Minimum order 1000 pieces DRAWER LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Pressure Cast Case, Steel Backplate and Bolt, Brass Cylinder and Plug If longer bolt is required, specify 02063A (Bolt length unlocked: 1 1/8" from centerline of lock to end) Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" All Different 8618C-R1 (5 Pin) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26* US26D Qty. (lbs./ oz.) /8" KD / /8" KA 4T / /8" /8" 02063A 7/8" 02063A 1 1/8" * Minimum order 300 pieces Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made-To-Order items are shaded. For explanation of finishing symbols, refer to Page 2. 5

6 DRAWER LOCKS Disc Tumbler & DRAWER LOCKS Disc Tumbler 7 8" Can be Masterkeyed, 11 8 Cannot be Masterkeyed* Material: Brass Plated Steel Backplate, Cylinder and Bolt, Pressure Cast Strike: No. 26S, brass, US4 only. Regularly furnished with locks /2 and /2. Strike: No. 7 S, brass, US4 only. F u rnished only when ord e red with locks a n d Rekeying: No Dead Bolt No /2 Latch Bolt Plug removal hole added to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert end of small tool (e.g., paper clip) into access hole and depress retainer while pulling key and plug out. For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8" JVR (5 Disc) 1 1 8" JVR (6 Disc) Part No/Cyl Length Stock ID No MKYD US4 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - CAT / /8" AUE / /8" KA - CAT / /8" KD /8 K /8" Drawer Lock, KD, Carded 7/8" Length / /8" /8" * /2" - 7/8" KD / /2" - 7/8" KA - CAT / /2" - 7/8" AUE / /2" - 7/8" KA - CAT / /2" - 7/8" /2" - 1 1/8" * & DRAWER LOCKS Disc Tumbler Cannot be Masterkeyed* Refer to Top of Page for Strikes and Rekeying Information No Dead Bolt Part No/Cyl Length Stock ID No MKYD US4 US26D Qty. (lbs./ oz.) /8" KD / /8" KA -CAT / /8", 1 1/8" * /2-7/8" KD / /2-7/8" KA -CAT / /2-7/8" * No /2 Latch Bolt SURFACE MOUNTING RECESSED MOUNTING 6 CCL SECURITY PRODUCTS Fax:

7 DRAWER LOCKS Disc Tumbler DRAWER LOCK Disc Tumbler Can be Masterkeyed Material: Brass Plated Steel Backplate and Bolt, Pressure Cast Cylinder If longer bolt is required, specify 02066B (Bolt length unlocked: 2" from centerline of lock to end) Gang lock S16596: 12" overall bolt length. Bolt extends from both ends of lock (Unlocked: 6.3" from top of lock; 4.2" from bottom of lock). Strike: No. 7S, brass, US4 only, furnished only when ordered For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7 8" 3/4, 1 1 8" JVR (5 Disc) KS (5 Disc) JVR (6 Disc) KS (6 Disc) SURFACE MOUNTING Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) /4" KD / /4" KA - CAT / /4" AUE / /4" KD / /8" KD / /8" KA - CAT / /8" CAT / /8" AUE / /8" MKY M8003(KD) / /8" KD / /8" KA - CAT / /8" CAT / /8" KD / /8" KA - CAT / /8" CAT / /8" KA - CAT /13 K /8" Drawer Lock, KA-CAT30, Carded / /8" /8" 02066B 7/8" 02066B 1 1/8" S /8" NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 7

8 SLIDING DOOR LOCK Pin Tumbler SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All Brass Operation: Push bolt type. To lock, push end of cylinder. To unlock, use key. As regularly furnished, key is removable in locked or unlocked position. Strike: No S, brass, US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 5862C-R1 (3 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26* US26D Qty. (lbs./ oz.) /8" * Minimum order 250 pieces SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: : All Brass Operation: Push bolt type. To lock, push end of cylinder. To unlock, use key A: Same as except key is used to BOTH lock and unlock the mechanism Strike: : No.02290S, brass, US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8", 1 3 8" All Different 8618C-R1 (5 Pin) Part No/Cyl Length Stock ID No MKYD US4 US26 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - 4T / /8" 4R / /8" KA - 4T / /8" /8" /8" * 02291A 7/8" * Minimum order 2000 pieces 8 CCL SECURITY PRODUCTS Fax:

9 PUSH & TURN SLIDING DOOR LOCK Pin & Disc Tumbler PUSH & TURN SLIDING DOOR LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 Material: All Brass. Operation: To lock, push in cylinder and turn counter-clockwise with key. To unlock, turn clockwise with key. End of bolt locks behind strike, which prevents doors from being spread apart. For protection of doors, bolt is locked in both in and out positions. Key is removable in both locked and unlocked positions. Strike: No. 213F472, brass US4 only, regularly furnished For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" 1 1 8", 1 3 8" All Different 8618C-R1 (5 Pin) Part No/Cyl Length Stock ID No. MKYD US4 US26 US26D Qty. (lbs./ oz.) /8" /8" * /8" * * Minimum order 250 pieces STRIKE PUSH & TURN SLIDING DOOR LOCK Disc Tumbler Can be Masterkeyed, except for 11 8" cylinder Material: Brass Outside Cylinder, Pressure Cast Plug Operation: To lock, push in cylinder and turn counter-clockwise with key. To unlock, turn clockwise with key. End of bolt locks behind strike which prevents doors from being spread apart. For protection of doors, bolt is locked in either in or out position. Key is removable in locked and unlocked position. For key removal in locked position only, specify 02069K. Strike: No S, brass US4 only, regularly furnished For Thickness of Material (A) Regular Key Masterkeyed Regular Also Available Changes Key Blank No. Key Changes Key Blank No. 7/8" 1 1/8", 1 3/8" JVR (5 Disc) KS (5 Disc) JVR (6 Disc) KS (6 Disc) STRIKE Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) /8" KD / /8" KA - CAT / /8" /8" /8" * 02069K 7/8" 02069K 1 1/8" 02069K 1 3/8" * * Minimum order 250 pieces Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 9

10 CHEST LOCKS Pin Tumbler 0168 CHEST LOCK Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: All brass Hook Bolt: Not self locking, retracts when unlocked Strike: No. 12S, brass US4 only, regularly furnished 3/64 57/64 3/8 5/16 5 / 16 THROW 25/64 13/64 For Thickness of Material (A) Regular Key Regular Also Available Changes Key Blank No. 7 8" All Different 8618C-R1 (5 Pin) 3/4 C SUNK FOR No. 4 SCREWS 1 1 / / /32 29/32 7 / 8 A 1 1 /2 15/64 Part No/Cyl Length Stock ID No. MKYD US4 Qty. (lbs./ oz.) /8" HALF MORTISE MOUNTING CAM LOCKS Pin Tumbler 15748, 15749, & CAM LOCKS Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Brass Key Blank No.: 8632C-R1 (4 pin) for C-R1 (5 pin) for C-R1 (5 pin) for Regular Key Changes: All different Cams: See dimension in table. Cams measured from center of plug to end of cam. Other cam options on Page 16. Cam Positions: Specify position when ordering. End of cylinder plug milled square and cams punched with square hole to allow cam to be applied in any one of four positions. Regular locked position for cam is at 12 o clock. Cam Rotation: Furnished with 90 degree rotation (12 o clock to 3 o clock standard). Key removable in locked position only. Cylinder: Slabbed on one side Strike: No. 2540, brass, US4 only, furnished only when ordered 7/8 B 1 B B1 0 3/4 1/8 A No.15748* No * No.15750* Distance Under Distance Under Distance Under Cam Cam Head to Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 B B 1 B 0 C2S 7 8" 5 8" 13 16" 1" C2L 1 1 4" 5 8" 13 16" 1" C3S 7 8" 1 2" 11 16" 7 8" C3L 1 1 4" 1 2" 11 16" 7 8" C4S 7 8" 3 8" 9 16" 3 4" C4L 1 1 4" 3 8" 9 16" 3 4" C5S 7 8" 3 4" 15 16" 1 1 8" C5L 1 1 4" 3 4" 15 16" 1 1 8" C6S 7 8" 7 8" " 1 1 4" C6L 1 1 4" 7 8" " 1 1 4" *Specify cam required on order, i.e x C2S Part No/Cyl Length Stock ID No. MKYD US4 US14 US26D Qty (lbs./oz.) DIA. Mounting Cutout: "Single D" Standard cutout for RH & LH Pin Tumbler Cam Locks 10 CCL SECURITY PRODUCTS Fax:

11 CAM LOCKS Pin Tumbler & CAM LOCKS with LAZY CAM FUNCTION Pin Tumbler Can be Masterkeyed Keyways Available: R1 & CR Material: Brass Key Blank No.: 8618C - R1 (5-Pin) Cam Rotation: Furnished with 90 degree rotation clockwise from 12 to 3 o clock, 3 to 6 o clock, 6 to 9 o clock, or 9 to 12 o clock. Specify cam rotation on order. Operation: Lock operated by full turn of key. Key removable in locked or unlocked position. Can also be set so that key is removable in locked position only with 90 degree cam rotation. Cylinder: Slabbed on one side 7/8 1/8 B 1 B 1 3 /8 A No.15783* No * Distance Under Distance Under Cam Cam Head to Cam Head to Cam No. Length B B 1 B 0 B " 1" " " 25 32" " " 11 16" 1" " 9 16" 7 8" " 1" " " 29 32" " *Specify cam required on order, i.e., x 205. No /8 1/8 B 1 B A Part No/Cyl Length Stock ID No. MKYD US2G US14 US26D Qty. (lbs./ oz.) / /16 No /8 1 3 / /8 1 1 /8 1 1 /4 1 7 /16 15/ DIA. Mounting Cutout: "Single D" Standard cutout for RH & LH Pin Tumbler Cam Locks Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 11

12 CAM LOCKS Tubular Pin Tumbler Package Includes: (1) (7 Pin) cylinder (w / key pulls at 12, 3, and 9 positions) (2) keys (KA or KD) (1) Straight cam 1 1/8 (1) Straight cam 7/8 (1) Offset cam 1 1/8 (1/8 offset) C-510-XS & C-510-S DIE CAST / BRASS TUBULAR CAM LOCK PACKAGE Pin Tumbler (1) Offset cam 1 1/8 (1/4 offset) (1) 90 Degree stop cam (1) 180 Degree stop cam (1) cam securing hex nut (1) cam securing lock B 3 32 Material: Zinc die cast housing, brass plug and spindle Operation: Push key and turn to desired position for locking and unlocking. Key removeable at various locations depending on mounting configurations. Specifications: Tubular cam lock available with removeable style cam only. Engineered for use in metal or fiberglass products. Mechanism: 7 Pin tumbler mechanism utilizing a tubular key which offers over 750,000 combinations. 2,000 combinations available for stock locks. No. C-510-XS No. C-510-S Distance Distance B C E B C E 7/16 5/16 23/32 23/32 9/16 1 5/64 D DIA. C E Part No/Cyl Length * Stock ID No. MKYD US26 Qty. (lbs./ oz.) BDB510XS KD /5 BDB510XS KA /5 BDB510XS KA /5 BDB510XS KA /5 BDB510XS KA /5 BDB510S KD /5 BDB510S KA /5 BDB510S KA /5 BDB510S KA /5 BDB510S KA /5 *Other keypulls and keying available with minimum quantity orders. Check with Customer Service. C520L DIE CAST / BRASS TUBULAR CAM LOCK PACKAGE Pin Tumbler Cannot be Masterkeyed Material: Zinc die cast Operation: Push key and turn 90 degrees to desired position for locking and unlocking. Key removeable at 12:00 position only. Specifications: Miniature tubular cam lock with removable style cam only. Engineered for use in metal or fiberglass products. Mechanism: 4 Pin tumbler mechanism utilizing a tubular key which offers 150 combinations. Package Includes: 1 1/8 Straight Cam 1 1/8 Offset 1 1/8 cam B 1 16 No. C520L-KA601-2CAM-US26 No. C520L-KD-2CAM-US26 Distance Distance B C D E B C D E 5/8 9/16 1 1/8 7/8 5/8 9/16 1 1/8 7/8 D DIA. C E.472 ±.002 DIA. Part No/Cyl Length Stock ID No. MKYD US26 Qty. (lbs./ oz.) C520L KA601-2CAM /0 C520L KD-2CAM / Recommended Application Hole Size 12 CCL SECURITY PRODUCTS Fax:

13 CAM LOCKS Disc Tumbler 7/8 19/32 THREAD LENGTH 7/8 B1 0 B B /64 No B 1 B B /32 THREAD LENGTH 1 9 /16 3/4 No A 7/8 13/32 THREAD LENGTH 7/8 3/4 B1 0 B B , 15752, 15753, & CAM LOCKS Disc Tumbler Can be Masterkeyed Material: Pressure cast Regular Key Changes: 200 with key blank 5865JVR (5 disc), 700 with key blank 8658JVR (6 disc) 61/64 B 1 B1 0 B 3/4 THREAD LENGTH MOUNTING CUTOUT A 1 21/64 3/4 No No DIA. 3/4 A A Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc), 700 with key blank 5861KS (6 disc) Cams: See dimension in table. Cams measured from center of cylinder to end of cam. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted at 12 o clock locked position. Cam may be mounted at 3, 6, 9, or 12 o clock locked position. Specify on order. Cam Rotation: Regular rotation 90 degrees from 12 to 9 o clock, key removable only in locked position at 12. Also available with 180 degree rotation from 12 to 6 o clock so key can be withdrawn in both locked and unlocked positions. Specify when ordering. Cylinder: Slabbed on both sides Clip: No also available with Clip (Page 15). Specify No. C15751 for 18, 20, and 22 gauge metal. No.15751* No * No.15753* No.15760* Distance Under Distance Under Distance Under Distance Under Cam Cam Head to Cam Head to Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 B B 1 B 0 B B 1 B 0 C2S 7 8" 5 8" 13 16" 1" 1 1 4" C2L 1 1 4" 5 8" 13 16" 1" 1 1 4" C3S 7 8" 1 2" 11 16" 7 8" 1 1 8" C3L 1 1 4" 1 2" 11 16" 7 8" 1 1 8" C4S 7 8" 3 8" 9 16" 3 4" 1" C4L 1 1 4" 3 8" 9 16" 3 4" 1" C5S 7 8" 3 4" 15 16" 1 1 8" 1 3 8" C5L 1 1 4" 3 4" 15 16" 1 1 8" 1 3 8" C6S 7 8" 7 8" " 1 1 4" 1 1 2" C6L 1 1 4" 7 8" " 1 1 4" 1 1 2" *Specify cam required on order, i.e., x C2S. Part No/Cyl Length Stock ID No. MKYD US4 US26D Qty. (lbs./ oz.) B15751 KD /9 B15751 KA - CAT /9 B15751 CAT /9 B15751 MKY M8003(KD) /9 B15751 C B15752 KD /9 B15752 KA - CAT /9 B15752 CAT /9 B15752 MKY M8003(KD) /9 B B15760 KD /9 B15760 KA - CAT /9 B15760 CAT /9 B15760 AUE /9 B15760 MKY M8003(KD) /9 B15760 K15760 Cam Lock, KD, Carded /2 K15760A Cam Lock, KA - CAT30, Carded /2 K15760 Carded K15760A KA - CAT30, Carded 121F Stop Cam 1 1 /4 9/16 1/4 C4L/C6L 1/4 Offset Cam 21/32 53/ /8.762 DIA F248 Pronged Washer 231F558 Collar Ring Bulk Pack: B15751, B15752, & B15760 locks are individually polybagged in US26D, keyed different, keyed alike, and masterkeyed. Each lock is assembled with C2L cam, 12 to 9 rotation, and 2 keys. Accessories also included in polybag are shown at left. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 13

14 CAM LOCKS Disc Tumbler No CAM LOCK with SPUN-ON CAM Disc Tumbler Cannot be Masterkeyed Material: Pressure Cast Cams: See dimension in table. Cams measured from center of cylinder to end of cam. Cam cannot be removed. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted in locked position at 12 o clock. Specify on order if different position required. Cam Rotation:Furnished with 90 or 180 degree rotation. Specify on order. (Regular rotation 90 degrees counter clockwise from 12 to 9 o clock). 180 degree stop cam allows key to throw cam 180 degrees which permits key to be withdrawn in both locked and unlocked positions. 90 degree stop cam allows key to throw cam 90 degrees which permits key to be removed in locked position only. Clip: Also available with clip (Page 15) for 18, 20, and 22 gauge metal. Specify No. C No / CAM LOCK with SPUN-ON CAM Disc Tumbler Can be Masterkeyed B1 0 Material: Pressure Cast Cams: See dimension "A" in table. Cams measured from center of cylinder to end of cam. Cam cannot be removed. Other cam options on Page 16. Cam Positions: Regularly furnished with cam mounted in locked position at 12 o clock. Specify on order if different position required. End of cylinder plug milled square. Cams punched with square hole to allow cam to be applied in any one of four positions. Cam Rotation: Furnished with 90 or 180 degree rotation. Specify on order. (Regular rotation 90 degrees counterclockwise from 12 to 9 o clock). Key removable in both locked and unlocked positions. A15259: Same as except cam is affixed with nut. C15259 or AC15259 available with clip (Page 15) for 18, 20, and 22 gauge metal. 9/16 B1 B 1 7/8 9/16 3/16 13/16 No B 1 B1 0 B1 A 15/32 3/4 No.15258* No * Distance Under Distance Under Cam Cam Head to Cam Head to Cam No. Length B B 1 B 0 B B 1 B 0 C2S 7 8" 15 32" 1 2" C2L 1 1 4" 15 32" 1 2" C3S 7 8" 11 32" 3 8" C3L 1 1 4" 11 32" 3 8" C4S 7 8" 7 32" 1 4" C4L 1 1 4" 7 32" 1 4" C5S 7 8" 19 32" 5 8" C5L 1 1 4" 19 32" 5 8" C6S 7 8" 23 32" 7 8" C6L 1 1 4" 23 32" 7 8" *Specify cam required on order, i.e., x C2S. A 7/32 No /8 3/4 Part No/Cyl Length Stock ID No MKYD US26D Qty. (lbs./ oz.) C A15259 C15259 AC DIA. MOUNTING CUTOUT 14 CCL SECURITY PRODUCTS Fax:

15 CAM LOCKS Disc Tumbler 15295D CAM LOCK Disc Tumbler Cannot be Masterkeyed. Key removable only in locked position. (180 degree rotation only) Material: Pressure Cast. Regular Key Changes: 200 with key blank No JVR (5 Disc) Part No/Cyl Length Stock ID No. MKYD US2G US26D Qty. (lbs./ oz.) 15295D 15295A Cam 15295D Cam 3/16 7/8 3/4 7/16 1/ DIA. Mounting Cutout: "Double D" Standard cutout for Disc Tumbler Cam Locks 5/16 5/8 55/64 11/32 11/32 5/8 1 1 /16 19/32 5/ REF No D No A No. S /16 33/64 C1091A MINIATURE CAM LOCK PACKAGE Disc Tumbler Cannot be Masterkeyed Material: Zinc die cast cylinders Specifications: Miniature cam lock available with removable style cam only. Engineered for use in metal or fiberglass products Mechanism: 4 Disc tumbler single bitted mechanism Package Includes: 1 1/8 Straight Cam 1 1/8 Offset 11/32 cam Key Pulls / 12:00 and 3:00 position 90 degree rotation only D.472 ±.002 DIA. D Recommended Application Hole Size 5 64 No. C-1091-A No. C1091A-KA-US14 No. C1091A-KD-US14 Key No. 105 Key No Distance Distance D D 1 1/8 1 1/ DIA Part No/Cyl Length * Stock ID No. MKYD US14 Qty. (lbs./ oz.) C1091A KA /0 C1091A KD /0 *Other keypulls and keying available with minimum quantity orders. Check with Customer Service. Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 15

16 CAMS CAM LOCK ACCESSORIES MOUNTING CLIP FOR CAM LOCKS TURNED-DOWN LEG PREVENTS PERMANENT SET Locks available with Clip: 2060C C15751 S2060NC C15258 S2060GF C15259 LOCKING NOTCHES POSITIVE POINTER TURNED-DOWN LEG PREVENTS PERMANENT SET No. 099F268 Made of tempered spring steel. Locks and snaps into place with an assuring click. An exclusive design holds clip securely in place; notches on clip engage notches on cylinder. For 18, 20, and 22 gauge metal. Stock ID Boxed Wt. Part No. No MKYD US2G US4 US14 US26D DICH Stock Qty (lbs./ oz.) 02069S 02290S 108F F F F F F F F F78 096F F26 CAM LOCK ACCESSORIES WASHER: 100 per box. For use under nut on wood application to prevent cylinder from turning DIA No. 253F268 Pronged Washer For use with pin tumbler cam locks DIA No. 230F248 Pronged Washer For use with disc tumbler cam locks. 8 STOP CAMS NUTS 8 No. 108F558 For 90 throw of cam. No. 096F402 PLUG NUT (Disc and Pin Tumbler) 8 No. 121F428 For 180 throw of cam. No. 407F78 CYLINDER NUT (Disc and Pin Tumbler) 3/4-24NC CCL SECURITY PRODUCTS Fax:

17 CAMS Bent Straight Offset Hook BENT CAMS No No A HOOK CAMS No. K6L Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) C2L C2S C3L C3S C4L C4S C5L C5S C6L C6S K6L 15703N A A 15751E 15751EA 15751EB 15751EC 15751ED OFFSET CAMS No A No N No. C3S/C5S No. C3L/C5L No. C4S/C6S No. C4L/C6L No E STRAIGHT CAMS No. C2S No. C2L No. S14509 No No EA No EB No EC No ED Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 17

18 SPECIAL PURPOSE LOCKS Disc Tumbler 2060N & 2060C SPECIAL PURPOSE LOCK Disc Tumbler Can be Masterkeyed, 1000 piece minimum Material: Pressure Cast. Regular Key Changes: 200 with key blank 5865JVR (5 disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc) 2060C: Same as 2060N except mounted by "clip" (Pg.15) instead of "nut" Cylinder: Slabbed on both sides 3/16 5/8 27/32 13/64 THROW 13/16 5/16 3/4 7/8 5/8 No. 2060N 3/16 7/8 7/16 No. S2060NC & S2060GF S2060NC & S2060GF SPECIAL PURPOSE LOCK Disc Tumbler with SPRING-IN Bolt Can be Masterkeyed, 1000 piece minimum. Regularly furnished with both nut and clip. Clip (Page 15) is for mounting on 18, 20, and 22 gauge metal. S2060NC bolt, clip, cylinder, and plug packed unassembled. Bolt inserted after cylinder is installed. S2060GF: Same as S2060NC, but with longer bolt and packed assembled. Bolt easily removed by using picking tool. Material: Pressure Cast Cylinder: Slabbed on both sides Regular Key Changes: 200 with key blank 5865JVR(5 Disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 Disc) 19/32 3/16 UNLOCKED POSITION LOCKED POSITION 27/32 19/32 3/16 LOCKED POSITION UNLOCKED POSITION 27/ /64 51/64 1/2 1 9 /64 31/32 43/64 13/64 13/64 53/64 7/8 O.D. 53/64 7/8 O.D. No. S2060C No. S2060GF Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) 2060C 2060N S2060C S2060NC KD /12 S2060NC CAT /12 S2060GF S2060N Masterkey: 1000 piece minimum. 18 CCL SECURITY PRODUCTS Fax:

19 STRIKES MATERIAL: Wrought brass. US4 only. STANDARD PACK: 25 Dimensions shown for reference only. No. 7S 1 15/16 x 17/32 x 3/64 1 9/16 c. to c. screw holes Bolt hole: 9/32 x 29/32 No. 12S 21/8 x 15/32 x 1/ /16 c. to c. screw holes Bolt hole: 9/32 x 61/64 No. 21S 2 7/16 x 41/64 x 1/ /36 c. to c. screw holes Bolt hole: 7/32 x 1 1/4 No. 26S 1 3/4 x 7/8 x 1/ /64 c. to c. screw holes Bolt hole: 19/64 x 3/4 No. 49S 1 1/2 x 21/64 x 3/64 1 7/32 c. to c. screw holes No.52S 2 1/16 x 17/32 x 5/64 1 5/8 c. to c. screw holes No. 69S 2 9/32 x 39/64 x 3/ /16 c. to c. screw holes Bolt hole: 1/4 x 1 1/8 No.100S 1 3/4 x 1 x 3/ /32 c. to c. screw holes Bolt hole: 9/32 x 61/64 No /16 x 7/16 x 3/ /32 c. to c. screw holes Stock ID Boxed Wt. Part No. No MKYD US4 Stock Qty (lbs./ oz.) 7S Strike /4 7S 12S Strike /4 12S 21S 26S 49S 52S 69S Strike /8 69S 100S 2540 Strike / Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 19

20 RH, Latch Bolt Pictured ENCLOSURE LOCKS Pin Tumbler & Warded ENCLOSURE LOCK Pin Tumbler Can be Masterkeyed ENCLOSURE LOCK Cannot be Masterkeyed 3/4.203 DIA. HOLES Keyways Available: CR Material: All Brass 15481RS: Right Hand, Latch Bolt 15481LS: Left Hand, Latch Bolt A15481RS: Right Hand, Dead Bolt A15481LS: Left Hand, Dead Bolt Material: Zinc Die Cast 55481RS: Right Hand, Latch Bolt A55481RS: Right Hand, Dead Bolt Operation: 1 4 turn of key retracts latch bolt. Regularly furnished with Dust Cap to cover keyway. Also available without Dust Cap. Operation & Specifications: Available Right Hand, Keyed Alike #2 in CR Keyway Only 1 1 /4 2 3/4 1/2 1 3 /4 2 1 /4 5/8 11/64 9/16 THROW 7/ 8 A 15/16 No. 238K Regular Key Nickel Silver For Thickness of Material (A) Changes Key Blank No. 7 8" All Different S8690 (5 Pin) Part No/Cyl Length Stock ID No. MKYD US2G US4 Qty. (lbs./ oz.) 15481RS-LS A15481RS-LS 55481RS, KA A55481RS, KA 465F062 R357SGS ENCLOSURE LOCK Ward Construction Cannot be Masterkeyed R557SGS ENCLOSURE LOCK Ward Construction Cannot be Masterkeyed Material: Brass, Cast Zinc Alloy Bolt Police Call Box Lock Furnished Right Hand Only Material: Zinc Die Cast Case & Bolt Furnished Right Hand Only Operation: Self Latching, latch bolt retracted by key Operation: Self Latching, latch bolt retracted by key 2 1 /4 Regular Possible Key Regular Key Changes Changes Key Blank No. 1 1 R /64 25/ 32 7/32 11/ / /16 THROW 21/32 Part No/Cyl Length Stock ID No. MKYD US4 Qty. (lbs./ oz.) R357SGS, Packed with 1 short key, R /6 R357SGS, Packed with 1 long key, R4266 R557SGS, Diecast, Packed with 1 short key, R /12 R557SGS, Diecast, Packed with 2 long keys, R R4266 Long Key 3 9/32" /7 R4266 Long Key R4277 Short Key 2 25/64" /3 R4277 Short Key 20 CCL SECURITY PRODUCTS Fax:

21 ENCLOSURE LOCKS Disc Tumbler & ENCLOSURE LOCKS (PANELBOARD) Disc Tumbler Can be Masterkeyed Material: Pressure Cast Lift Lever & Bolt, Steel Case, Zinc Plated Standard Regularly furnished right hand, left hand available when specified Operation: Self latching. Latch bolt retracted by lifting up on lift lever except when lever is locked down by key. Key is removable in both locked and unlocked positions : Same as except without key locking mechanism.193/ /16 7/16 Regular Key Masterkeyed Changes Key Blank No. Key Changes Key Blank No JVR (5 Disc) KS (5 Disc) 1/4 3/4 5/ /16 9/32 THROW PANEL / / Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) RH KA - CAT / RH CAT / Non-locking / /8 7/ & ENCLOSURE LOCKS (PANELBOARD) Disc Tumbler Can be Masterkeyed Material: Pressure Cast Lift Lever, Steel Case, Zinc Plated Standard Reversible for right or left hand door Operation: Self latching. Latch bolt retracted by lifting up on lift lever except when lever is locked down by key. Key is removable in either locked or unlocked position. Easy installation with steel mounting clip 199F : Same as except without key locking mechanism Regular Key Masterkeyed Changes Key Blank No. Key Changes Key Blank No JVR (5 Disc) KS (5 Disc) / /64 13/32 Part No/Cyl Length Stock ID No. MKYD US26D Black Qty. (lbs./ oz.) KA - CAT / F838 1/ 1/2 MOUNTING CLIP NO. 199F838 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 21

22 HANDLES 2506 TEE HANDLE Handle Size: 13 4" Handle Projection: 11 8" Base Diameter: 3 4" Shoulder Diameter: 7 16" Height: 3 32" Spindle Length: 15 16" 1 1 /2 SPINDLE LENGTH 2516 TEE HANDLE Handle Size: 23 4" Handle Projection: 15 8" Base Diameter: 1" Shoulder Diameter: 5 8" Height: 1 8" Spindle Length: 11 4" Tee Handle: Cast bronze Operation: Cam is operated by quarter turn of handle Cam: Steel, zinc plated. No regularly furnished. Spindle: Bronze, 5 16" on the diamond Hand: Reversible for right or left hand doors. Assembly plate is regularly furnished blank for spot welding. 3/32 1/8 Proj. 2 1 /8 1 1 /2 Stock Part No/Cyl Length ID No. MKYD US2G US10 US26 Qty. (lbs./ oz.) 2506 Flush metal catch, non-locking / Tee handle, non-locking / Cam 2506B Assembly plate 1 1 /2 3/ / /8 No Cam Zinc Plated Assembly Plate No. 2506D Blank for spot welding NOTES 22 CCL SECURITY PRODUCTS Fax:

23 HANDLES 2504 FLUSH METAL CATCH Handle: Cast bronze Handle Size: 5 8" Base Diameter: 5 8" Shoulder Diameter: 7 16" Height: 1 16" Operation: Cam is operated by quarter turn of screwdriver or coin in slotted head Cam: Steel, zinc plated. No regularly furnished. Spindle: Bronze, 5 16" on the diamond, 9 16" length Hand: Reversible for right or left hand doors Assembly Plate: Wrought steel, 2 1 8" x 5 8" with stop for cam. Regularly furnished blank for spot welding. 1 1 /2 1/2 1/16 3/32 7/16 1/8 5/8 1/16 Stock Part No/Cyl Length ID No. MKYD US2G US10 US26 Qty. (lbs./ oz.) 2504 Flush metal catch, non-locking / Cam 2506B Assembly plate 1 1 /2 3/ / /8 No Cam Zinc Plated Assembly Plate No. 2506D Blank for spot welding NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 23

24 LEVER HANDLE Disc Tumbler 1000 Series LEVER HANDLE Disc Tumbler Can be Masterkeyed For Metal or Wood Application Material: Pressure Cast Handle, Steel Zinc Plated Spindle Operation: Furnished for one, two, or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degrees RH regularly furnished) 90 degree RH handles rotate counter clockwise from 12 to 9 o clock 90 degree LH handles rotate clockwise from 12 to 3 o clock 180 degree handles are reversible for RH or LH doors Key is removable in locked or unlocked position for either 90 or 180 degree handles Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o clock. Rods and Guides: Not furnished Spindle Length: Regularly furnished 25 32" and 3 1 2" long (measured from back of escutcheon). Also available in 1 4" increments from 1" to 3 1 2" Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for surface mounting " c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1000S). Screws not furnished. Rekeying: Plug removal access hole added to shank of handle allows for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. NO.8-32 X 1/4 LG 1 1 /2" CENTER TO CENTER 1/8 MAX DOOR THICKNESS 3/8 2 9 /16 3/16 Part Material Key Key Masterkeyed Key Number Function Handle Spindle Changes Blank No. Key Changes Blank No. Locking Pressure Steel, JVR KS 1000 Handle Cast zinc JVR KS Operating satin plated 1000A Handle, chrome non-locking finish 1000B Rigid Handle, US26D non-operating 11/32 25/32 REG 1 11 / /32 5/16 SQ. 1 3 /32 (H1) 1 15 / 32 (H2) 21/ 2 25/32 15/16 H3 HOLDING PLATE 1/2 1 9 /32 4 Spindle Part No/Hand Stock ID No. MKYD Length US2G US26D Qty. lbs./ oz RH CAT 60 Lever /32" 10 5/ RH KA-CAT45 Lever /2" 10 5/ RH CAT 60 Lever /2" 10 5/ RH or LH 2.23 X 1000A - RH Lever Non-locking /32" 10 5/ A - RH Lever Non-locking /2" 10 5/ A Non-locking X 1000AS Surface non-locking X 1000B Non-locking rigid 1000S 2.23 X H1-US2G H1 H2-US2G H2 H3-US2G H3 S14441 S14452 S14271 X = Spindle for metal applications standard length is 25/32". Other lengths available 1" up to 3 1/2", at additional cost. CAMS FOR USE ON BOTH THE 1000 AND 1001 (Cams continued on Page 24. NOTE: All cams on Page 16 may be used with 1000.) 3/32 3/ DIA. 1 7 /8 1 7 / SQ. 1 3 /32 R. 3/32R (H1) 1 15 /32 (H2) 2 1 /2 3/8R 1/2 35/64R 1/32R 1 7 / SQ. 11/16 3/ /8 1 7 / / SQ. Cam No. H1 and No. H2 SPECIFY CAM REQUIRED Packed 10 per Box 3/ /4 1/32R Holding Plate No. H3 Packed 10 per Box Cam No. S CCL SECURITY PRODUCTS Fax:

25 TEE HANDLES Disc Tumbler NO.8-32 X 1/4 LG 1 1 /2" CENTER TO CENTER 1/8 MAX DOOR THICKNESS 3/ Series TEE HANDLE Disc Tumbler Can be Masterkeyed For Metal or Wood Application Material: Pressure Cast Handle, Steel Zinc Plated Spindle Operation: Furnished for one, two, or three point locking, right or left hand doors, with 90 or 180 degrees rotation (90 degrees RH regularly furnished) 90 degree RH handles rotate counter clockwise from 12 to 9 o clock 2 9 /16 3/16 90 degree LH handles rotate clockwise from 12 to 3 o clock 180 degree handles are reversible for RH or LH doors Key is removable in locked or unlocked position for either 90 or 180 degree handles Cam Positioning: Square spindle allows cams to be mounted at 12, 3, 6, and 9 o clock Rods and Guides: Not furnished Spindle Length: Regularly furnished 25 32" and 3 1 2" long (measured from back of escutcheon). Also available in 1 4" increments from 1" to 3 1 2". Surface Mounting: In addition to mounting shown, handles are available with attaching holes through face of escutcheon for surface mounting -11 2" c. to c., countersunk for #10-32 screws. When ordering, suffix S to number (1001S). Screws not furnished. Rekeying: Plug removal access hole added to shank of handle allows for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert a small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. Part Material Key Key Masterkeyed Key Number Function Handle Spindle Changes Blank No. Key Changes Blank No. Locking Pressure Steel, JVR KS 1001 Handle Cast Zinc JVR KS Operating Satin Plated 1001A Handle, Chrome non-locking Finish 1001B Rigid Handle, US26D non-operating 11/32 25/32 REG 1 19 / /32 5/16 SQ. 1 3 /32 15/16 (H1) 1 15/32 (H2)2 1/2 1/2 H3 HOLDING PLATE Spindle Part No/Hand Stock ID No. MKYD Length US26D US2G Qty. (lbs./ oz.) RH KA-CAT45 Tee /32" 10 5/ RH CAT 60 Tee /32" 10 5/ RH KA-CAT45 Tee /2" 10 5/ RH CAT 60 Tee /2" 10 5/ RH or LH 2.23 X 1001A - RH Tee Non-locking /32" 10 5/ A - RH Tee Non-locking /2" 10 5/ A Non-locking - X 1001AS Surface non-locking X 1001B Non-locking rigid* 1001S 2.23 X H1-US2G H1 H2-US2G H2 H3-US2G H3 S14441 S14452 * Minimum order 500 pieces X = Spindle for metal applications standard length is 25/32". Other lengths available 1" up to 3 1/2", at additional cost. CAMS FOR USE ON BOTH THE 1000 AND 1001 ( NOTE: All cams on Page 16 may be used with 1000.) SQ. 3/8 7/ SQ. 3/8 7/16 7/32 DIA. (2 holes) 11/16 11/16 13/16 DIA. 1 5 /8 1 5 /8 1 1 /2 Mounting Hole Locations for 1000/1001 5/8 5/8 3/4 Cam No. S14441 Wrought Steel Zinc Plated Cam No. S14452 Wrought Steel Zinc Plated For use with 1000 & 1001 handle ONLY. For use with locking devices or handles having 0.314/0.317 spindle on the square. 25

26 3 POINT TEE HANDLES/ PULL HANDLES Disc Tumbler RH Pictured POINT TEE HANDLES Disc Tumbler Can be Masterkeyed Regularly furnished right hand. Left hand available when specified on order. Material: Pressure Cast, Steel Zinc Plated Cam (RH No. 262F79 or LH No. 262F80) Operation: Top and bottom bolts and cam are operated by quarter turn of handle, except when handle is locked by key. Key removable in either locked or unlocked position. Metal Thickness: 1 8" Maximum Regular Key Changes: 200 with key blank 5865JVR (5 disc) Masterkeyed Key Changes: 180 with key blank 5860KS (5 disc) Rods and Guides: Not furnished Hand: Regularly furnished right hand Rekeying: Plug removal access hole added to shank of handle to allow for removal of plug assembly for rekeying purposes. To remove plug, insert key and rotate 90 degrees. Insert small tool (e.g., paper clip) in access hole and depress retainer while pulling key and plug out of handle. 5/8 11/ /4 1 3 /8 1 5 /8 1 3 /4 1 3 /4 13/64 55/64 Part No/Cyl Length Stock ID No. MKYD US26D Qty. (lbs./ oz.) RH Tee KA - CAT / RH Tee KA - CAT / F79 (RH) 262F80 (LH) 1 3 / / SQ. 27/32 1 /4 3 POINT CAM RH 262F PULL HANDLE Overall Size: 11 2" x 53 4" Base Width: 7 8" Projection: 11 4" Clearance: 7 8" Material: Steel, No Finish For Welding or Stainless Steel 1 1 /2 7/8 5 3 /4 7/8 1 1 /4 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) 3284* /3 3284* 3284* *Only sold in quantities of 100 S14810 PULL HANDLE Overall Size: 11 2" x 53 4" Base Width: 7 8" Projection: 11 4" Clearance: 7 8" Material: Steel or Stainless Steel /2 7/8 13/64 7/8 1 1 /4 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) S14810* S14810* * Only sold in quantities of / CCL SECURITY PRODUCTS Fax:

27 CATCHES With Concealed Compression Springs 834, 834S, 834U DRAW PULL CATCHES Material: : Spring cover and cradle are of stainless steel, other parts are carbon steel Designed for compressing gaskets. Made for heavy duty service. Withstands 600 lb. pull test. Top piece designed (for catch protection) to withstand lb. pull. Proper positioning of catch and strike automatically adjusts springs to proper holding tension. Overall Size: 2 3 4" x 1 1 8" x 3 8" Strike No: S 834 Less Strike: Specify on order using prefix "LS" (e.g., LS834). S16127 available by special order. 834S DIA. 4 places Number Description Desired Tension A B 834 Lever Curves In 30 lbs U Lever Curves Out 70 lbs B A.85 Part No/Cyl Length Stock ID No. MKYD US2G PSS Qty. (lbs./ oz.) 834* /3 834* 834S* S16127 S-S16127 No. 834 compressions spring draw pull catch meets U.S. Signal Corps specification, Drawing number SC-B * Special minimum order quantities. Contact Customer Service. NOTES Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 27

28 CATCHES With Compression Springs 824 DRAW PULL CATCHES Normal attaching hole spacing tension, 50 lbs. ± 10% - 1 8" deflection Material: Steel with Stainless Steel Strike No: S794 for 824, S794W for 824W Less Strike: Specify on order using prefix "LS" (e.g., LS824) DIA. 2 places Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) /0 S794 S794W DIA. 2 places 804 DRAW PULL CATCH Normal attaching hole spacing catch tension, 100 lbs. ± 10% - 1 8" deflection Material: 804 Steel with Stainless Steel; R801 Steel Strike No.: S641 Less Strike: Specify on order using prefix "LS" (e.g., LS804). Optional Strike No. S644 (Page 28) DIA. 2 places Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) /0 S644 S641 R801 * * Minimum order required. Check with Customer Service No. R801 Loop retainer Spring Furnished only when ordered, i.e., 804 x R DIA. 3 places /32 7/32 DIA. 3 HOLES 9/16 13/ 16 3/8 9/16 13/64 13/ Shown Applied 28 CCL SECURITY PRODUCTS Fax:

29 DRAW PULL CATCHES 641, 642, 643, 643W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS641). No. 641 Number Material Strike No.* 641 Steel S Steel S Steel S W Steel. Without S641W holes for welding Dia. 2 Places Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) / / /0 S641 S Dia. 3 Places Dia. 2 Places Dia Places No. 642 No. 643/643W Dia Dia. 2 Places Dia. 2 Places No. S644 with attaching holes for Catches 641, 642, 643, 804 3/4 41/ /32 3/4 5/64 13/64 DIA. 2 HOLES 13/ 16 Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 29

30 DRAW PULL CATCHES 794 DRAW PULL CATCH Material: Steel, no finish Strike No.: S794 Less Strike: Specify on order using prefix "LS" (e.g., LS794) Part No/Cyl Length Stock ID No. MKYD US3 US2G Qty. (lbs./ oz.) /3 794 S Dia. 2 Places Dia. 2 Places 797, 0797, 797W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS797). Number Material Strike No.* 797 Steel S Brass, dipped S0794 and lacquered Steel without 797W holes for welding S794W Dia. 2 Places Part No/Cyl Length Stock ID No. MKYD US3 US2G Qty. (lbs./ oz.) / * Minimum order 500 pieces Dia. 2 Places 30 CCL SECURITY PRODUCTS Fax:

31 DRAW PULL CATCHES 798 DRAW PULL CATCH Material: Steel Designed to withstand 100 lb. pull Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) / Dia. 2 Places , 250W DRAW PULL CATCH Less Strike: Specify on order using prefix "LS" (e.g., LS250). Number Material Strike No.* 250 Steel S250 Steel, no finish 250W Without holes S250W for welding Part No/Cyl Length Stock ID No. MKYD US2G Qty. (lbs./ oz.) /3 S Dia Dia. 4 Places Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 31

32 MULTI-PURPOSE SUIT CASE CATCHES 1771 SUIT CASE CATCH Material: Steel Part No/Cyl Length Stock ID No. MKYD US3 US14 Qty. (lbs./ oz.) 1771 US / US /7 1 7 /16 3/8 3/32 5/32 Dia. 1 1/2 1/2 31/32 3/8 3/4 2 3 / / /32 MOUNTING DIMENSIONS 1778 SUIT CASE CATCH Material: Steel Part No/Cyl Length Stock ID No. MKYD US3 US14 Qty. (lbs./ oz.) 1778 US / US /8 1 3 /4 7/16 3/32 3/8 1 1 /4 5/8 5/8 1 3 /32 15/ / / /32 MOUNTING DIMENSIONS SESAMEE Display PCW SESAMEE CUT-AWAY DISPLAY 4 1 4" x 6 5 8" Easel Stand for counter top. Internal parts of SESAMEE cut-away are fully operational. Part No/Cyl Length Stock ID No. MKYD Qty. (lbs./ oz.) PCW /0 32 CCL SECURITY PRODUCTS Fax:

33 SESAMEE Padlocks No.K436 No.K500 3/4 No. AB410 K436, K437, K440, K500 SERIES CCL - Sesamee, "the padlock without a key", means strength and simplicity in locking security. Choose from 10,000 possible combinations which can be easily changed and set. Heel and toe locking. All brass internal locking mechanism. Automatic "0000" stop. Full instructions furnished. Chain: Can be furnished with 9-inch chain. Steel shackle with 2217N chain assembly. Brass shackle with 02217N chain assembly. Specify on order using suffix "C" (e.g., 436C). AB410 Ruggedly built padlock with case hardened steel shackle, chrome plated to resist corrosion. Choose from 1,000 possible combinations. Full instructions furnished. SESAMEE Display PCW SESAMEE CUT-AWAY DISPLAY 4 1 4" x 6 5 8" Easel Stand for counter top. Internal parts of SESAMEE cutaway are fully operational. Part No/Cyl Length Stock ID No. MKYD Qty. (lbs./ oz.) PCW /0 No. K636 SUPER SESAMEE TM Padlocks K636, K637, K646 CCL - Super Sesamee TM, the industrial strength 4-Dial combination padlock, encased in a hardened steel full metal jacket, with a black, weather resistant electrocoating. Set your own combination from 10,000 available combinations. Heel and toe locking, all brass internal mechanism. Full combination resetting instructions furnished along with Change Pin. Combination cannot be changed unless the lock is in the open position. No. K637 No. K646 Shackle Number Material Shackle Material Clearance Qty. (lbs./oz.) AB410 Heavy pressure cast, Hardened steel, Chrome plated 9/16" 5 1/11 Black Epoxy finish K436 Brass Body Hardened steel, Chrome plated 1" 5 3/4 K0436 Brass Body Marine Type Brass 1" 5 3/4 K437 Brass Body Hardened steel, Chrome plated 2 1/4" 5 3/4 K0437 Brass Body Marine Type Brass 2 1/4" 5 3/8 KCR0436 Brass Body, Polished Marine Type Brass 1" 5 3/8 Chrome Finish Chrome plated K440 Brass Body Hardened steel, Chrome plated 4" 5 3/12 K Heavy pressure cast, Hardened steel, Chrome plated 1" 5 3/1 Black Epoxy finish K /4 Heavy pressure cast, Hardened steel, Chrome plated 2 1/4" 5 3/4 Black Epoxy finish K636 Black Hardened Steel Jacket Chrome Plated Molybdenum 1" 5 7/0 K637 Black Hardened Steel Jacket Chrome Plated Molybdenum 2" 5 7/8 K646 Black Hardened Steel Jacket Chrome Plated Molybdenum 1" 5 8/0 CCL SECURITY PRODUCTS Fax:

34 SEARCHALERT TSA Accepted by PRESTOLOCK SearchAlert Collection: K6430, K7400, K7450, K7470, K8470 No.K /32 33/64 1/8 1 1/8 23/ /64 Combination: 3 and 4 dials, 1,000/10,000 possible combinations Colors: * The new SearchAlert re-settable combination padlock by Prestolock offers two unique innovations in luggage security: 1. SearchAlert may be opened with a secured access device controlled by Transportation Security Administration (TSA) agents. No SearchAlert lock should be cut off by TSA agents. 2. SearchAlert features a Security Window which changes color from Green to Red when any secured access device is used. The Security Window shows Red under the following conditions: Luggage checked at an Airport is sent through an electronic screening. If a TSA agent determines the luggage needs to be hand searched, the SerachAlert lock will be opened by the agent. When the TSA secured access device is used, the Security Window changes color from Green to Red. The Security Window also changes color from Green to Red if a counterfeit secured access device is used to open the SearchAlert lock. If a TSA agent hand searches a piece of luggage, the agent will leave a TSA Notification of Baggage Inspection in the bag. If the SearchAlert lock Security Window shows red, and no official Notification of Baggage Inspection is found, the traveler should take the luggage to the airlines luggage claim office to determine if anything is missing, or if anything has been added to the luggage. 1/8 23/64 1/8 23/64 1/4 15/32 27/32 27/32 23/32 1 7/8 1 39/ /64 No.K /64 1 1/8 No.K /64 1 1/8 No.K /64 1 1/8 No.K7450 Bright Nickel Brass Plated Black Cobalt Blue Lime Green Color Options Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Pack Pack (lbs./oz.) Pewter Construction Orange Hot Pink Sunshine Yellow White Camouflage Purple Grape Fire Engine Red 6430 Carded** K6430* 6 1/ Bulk** B6430* / Carded K7400* 6 0/ Bulk** B7400* / Pack K7400X2* 12 4/ Carded K7450* 6 1/ Bulk** B7450* / Carded K7470* 6 1/ Bulk** B7470* / Carded K8470* 6 1/ Bulk** B8470* /0 ** Bulk items sold only in quantities of 100 unless specified. *NOTES: For carded items, use "K" prefix (e.g., K3470) For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Brass Plated BP For colors, specify one suffix from below (e.g., K3470PSB): Black PSB Construction Orange PFO Sunshine Yellow PFY Cobalt Blue PBL Hot Pink PFP Camouflage PCF White PW Lime Green PFG Purple Grape PPU Pewter PTR Fire Engine Red PRD Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 34 CCL SECURITY PRODUCTS Fax:

35 PRESTOLOCK Combination Padlocks Each lock is made of zinc die-cast housings with steel shackles for strength and durability--we back it up with a lifetime guarantee. Set your own combination on a wide variety of styles, colors, finishes, and sizes DELUXE COMBINATION PADLOCK Combination: 2 dials, 100 possible combinations Colors: Black 47/ /8 31/64 5/16 55/64 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Packaging Pack (lbs./oz.) 2402 Carded K2402* 6 0/ Bulk** B2402* /2 ** Bulk items sold only in quantities of 100 unless specified DELUXE COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations 27/ /64 5/16 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Gold Chrome Pack Pack (lbs./oz.) 2400 Carded K2400* / Bulk** B2400* /10 ** Bulk items sold only in quantities of 100 unless specified. 31/64 55/64 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Gold PG Antique Brass ABR Brass Plated BP Polished Chrome PC Black Chrome ABC For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Neon Orange PFO Flame Red PRD Royal Blue PBL Hot Pink PFP Snow White PW Lime Green PFG Passion Purple PPU Bright Yellow PFY Pewter PTR Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. NOTES 35

36 PRESTOLOCK Combination Padlocks 3470 TRADITIONAL COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, 27/ /64 31/64 PRESTOLOCK 5/16 55/64 1/8 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Pack Pack (lbs./oz.) 3470 Carded K3470* / Bulk** B3470* / Pack *** K3470X2* 6 1/4 ** Bulk items sold only in quantities of 100 unless specified. *** Comes in All Finishes 4400 TRADITIONAL COMBINATION PADLOCK Combination: 4 dials, 10,000 possible combinations Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs/oz.) 4400 Carded K4400* 6 0/ Bulk** B4400* / Pack K4400X /9 ** Bulk items sold only in quantities of 100 unless specified DIAL CLIP LOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Black Pack Pack (lbs./oz.) 2405 Carded K2405* / Bulk** B2405* / Pack K2405X2* /2 ** Bulk items sold only in quantities of 100 unless specified. *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Gold PG Antique Brass ABR Brass Plated BP Polished Chrome PC Black Chrome ABC 36 CCL SECURITY PRODUCTS Fax:

37 PRESTOLOCK Combination Padlocks 2430 DELUXE COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations 15/ /64 35/64 1/4 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Orange Pack Pack (lbs./oz.) 2430 Bulk** B2430* /10 ** Bulk items sold only in quantities of 100 unless specified. 31/ / STANDARD COMBINATION PADLOCK Combination: 3 dials, 1,000 possible combinations Colors: Black, other colors 1,000 piece minimum 15/ /64 35/64 1/ 4 Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Black Pack Pack (lbs./oz.) 2470 Carded K2470* / Bulk** B2470* /11 ** Bulk items sold only in quantities of 100 unless specified. 31/ / TRAVELOCK For securing doors, windows, drawers, and cabinets. Includes 2470 nickel plated padlock, hook, slotted plate, and storage pouch. Appox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Chrome Nickel Pack Pack (lbs./oz.) /2 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Neon Orange PFO Flame Red PRD Royal Blue PBL Hot Pink PFP Snow White PW Lime Green PFG Passion Purple PPU Bright Yellow PFY Pewter PTR Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 37

38 PRESTOLOCK Combination Padlocks 1/2 7/16 1/8 2340, 2350 KEYED MINI LUGGAGE LOCK Pin Tumbler, two keys per lock Side entry, keyed alike, key retaining Material: Solid brass housing with steel shackle 2350 same except two per card 2341, 2351 KEYED MINI LUGGAGE LOCK Pin Tumbler, two keys per lock 3-pin, keyed alike, key retaining Material: Steel housing with steel shackle same except two per card 25/32 PRESTO 57/64 13/32 Aprox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Brass Black Pack Pack (lbs./oz.) 2340 Carded K2340* / Bulk** B2340* / Carded K2341* / Bulk** B2341* / Carded 2-Pack K / Carded 2-Pack K /13 ** Bulk items sold only in quantities of 100 unless specified HEAVY DUTY COMBINATION PADLOCK Material: Die cast housing with case hardened steel shackle Combination: 4 dials, 10,000 possible combinations Toe and Heel locking Appox. Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs./oz.) 2620 Carded K2620* / Bulk B2620* / /64 5/ / /64 25/32 *NOTES: For carded items, use "K" prefix (e.g., K3470). For bulk items, use "B" prefix (e.g., B3470). For plated finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel BN Polished Chrome PC Antique Brass ABR Brass Plated BP Black Chrome ABC For colors, specify one suffix from below (e.g., K3470PSB): Midnight Black PSB Not all plated finishes available with all locks. Check with Customer Service for information on custom colors. 38 CCL SECURITY PRODUCTS Fax:

39 PRESTOLOCK Combination Padlocks 2621 HEAVY DUTY COMBINATION PADLOCK Material: Die cast housing with case hardened steel shackle Combination: 4 dials, 10,000 possible combinations Toe and Heel locking Shelf Master Boxed Wt. Part No/Cyl Length Stock ID No. Nickel Pack Pack (lbs./oz.) 2621 Carded K2621* / Bulk B2621* / / /64 5/ / /64 25/32 COMBINATION LOCKS for Cabinet Doors D900 and D901 COMBINATION LOCKS for Cabinet Doors Available for Wood or Metal Applications. They easily retrofit existing locks of similar design and feature re-settable combinations with easy to use instructions. Available in US26D or US4. D900 x US26D D901 x US26D D901 x US4 Full templates for new installations! Mechanical, no batteries needed. Latex Free for Hospital, Medical Center and Nursing Care facilities. Boxed Wt. Part No/Cyl Length Stock ID No. Description Qty. (lbs./ oz.) D900 x US26D Combination Lock Push Button US26D, Sheet Metal Door ea. D901 x US26D Combination Lock Push Button US26D, Wood Door 5/8"-7/8" ea. D901 x US Combination Lock Push Button US4, Wood Door 5/8"-7/8" ea. *NOTES: For carded items, use "K" prefix (e.g., K2620). For bulk items, use "B" prefix (e.g., B2620). For finishes, specify one suffix from below (e.g., K3470BN): Bright Nickel Polished Chrome BN PC 39

40 PRESTOLOCK Countertop Displays TSAD Display Options There are three options for TSAD Displays: Build Your Own Display, TSAD-2, TSAD-3. All Include*: 1 Each SearchAlert Counter Card 1 Each SearchAlert Spin Rack Header 1 Each Prestolock Promise Sheet 1 Each SR Hook Spin Rack 1 Each SearchAlert Poster An attractive and convenient way to display your PRESTOLOCKS. To obtain, contact Customer Service. 1. Build Your Own TSAD Display Order 48 pieces of SearchAlert, Prestolock or Prestoseal and receive Core Items Free of Charge. *Core Items in Display Options 2. TSAD-2 Display 18 Each: K7400PSB Black 12 Each: K7400PTR Pewter 12 Each: K7400BN Bright Nickel 6 Each: K7400PW White 3. TSAD-3 Display 18 Each: K7400PSB Black 6 Each: K7400PTR Pewter 6 Each: K7400BN Bright Nickel 6 Each: K7400PW White 6 Each: K61900 Deluxe Prestoseal Black 6 Each: K61902 Mimi Prestoseal Yellow 40 CCL SECURITY PRODUCTS Fax:

41 HUSKI TM PADLOCKS Disc Tumbler Rekeyable 66 Series HUSKI PADLOCKS Material: Solid pressure cast, textured military green matte finish. Hardened steel, chrome plated shackle. Key Blank No.: 5865-JVR (5 Disc), 8658-JVR (6 Disc) Disc Tumblers: 6 regular Regular Key Changes: 200 (5 Disc), 700 (6 Disc) Masterkeyed Key Changes: 180 (5 Disc), 700 (6 Disc) Masterkeying: Available when specified on order Chain: Available with 2217N steel chain assembly, 9" chain. Specify on order using suffix "C" (e.g., 66C). 1/4 3/4 A 1 13 /32 3/4 1 1 /2 Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Qty. (lbs./ oz.) 66 KD /4" 10 4/0 K66 KD, Carded /4" 8 4/0 66 KA - CAT /4" 10 4/0 66 CAT /4" 10 4/0 66 AUE /4" 10 4/0 66 AUE /4" 10 4/0 66 MKY M8003 (KD) /4" 10 4/0 66 3/4" 66H 1 1/4" 66HB 1 1/4" 66K 5" 66P 2 3/4" 66 Series Only 66H available with breakable shackle for emergency entry. Specify on order using suffix "B" (e.g., 66HB) 66R, 66KR HUSKI PADLOCKS 66R: 2 3 4" shackle with tag and clevis 66KR: 5" shackle with tag and clevis Clevis: Nylon holder and brass tag Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Qty. (lbs./ oz.) 66R KD /4" 10 4/5 66R KA - AUE /4" 10 4/5 66R MKY M8003 (KD) /4" 10 4/5 66R 2 3/4" 66KR KD " 10 4/3 66KR KA - AUE " 10 4/3 66KR MKY M8003 (KD) " 10 4/3 66KR 5" 1/4 3/4 2 3 / /32 3/4 1 1 /2 41

42 PADLOCKS & CHAINS Pin Tumbler 95 PADLOCK Heel and toe deadlocking security Material: Solid pressure cast case with silver gray finish. Hardened steel, chrome plated shackle. Regular Key Changes: All different Masterkeying: Available when specified on order 2 Keys Blank No.: 8687C-CR Keyways Available: CR Number of Pin Tumblers: 6 Chain: Available with 2217N steel chain assembly, 9" chain. Specify on order using suffix "C" (e.g., 95C). 9/32 7/8 3/4 Shackle Zinc Brass Silver Part No./Cyl Length Stock ID No MKYD Clearance Plated Dipped Gray 95 3/4" N N/A 02217N N/A 1 19 /32 15/ /4 43/64 178, 178A PADLOCKS Material: Solid brass case, with wheel finish Masterkeying: Available when specified on order 2 Keys Blank No.: 8618C Number of Pin Tumblers: 5 Regular Key Changes: All different Special Stamping: Available with case stamped to customer requirements when specified on order. 15/32 Shackle Shackle Part No/Cyl Length Stock ID No. MKYD Clearance Material 178 5/8" Brass 178A 5/8" Hardened Steel 3/16 5/8 1 5 /32 9/ /8 42 CCL SECURITY PRODUCTS Fax:

43 PADLOCKS Pin Tumbler 904 SERIES PADLOCKS Keyways Available: CR, R1, R4, VR Number of Pin Tumblers: 5 or 6 Regular Key Changes: All different Masterkeying: Available when specified on order Chain: Available with 9" chain. Steel shackle with 2217N chain assembly. Brass shackle with 02217N chain assembly. Specify on order using suffix "C" (e.g., 904C). Special Stamping: Available with case stamped to customer requirements when specified on order. Unassembled padlocks available. 5/16 41/64 A 1 13 /32 5/8 1 1 /2 Key Appox. Material Shackle Blank Part No/Cyl Length Stock ID No. MKYD Case Shackle Clearance No. Qty. (lbs./ oz.) 904 US4 KD Solid brass, Hardened 3/4" 8618C 10 4/8 wheel finish steel, chrome plated 904 US4 KA - BAZ Solid brass, Hardened 3/4" 8618C 10 4/8 wheel finish steel, chrome plated 904 Solid brass, Hardened 3/4" 8618C wheel finish steel, chrome plated 0904 Solid brass, Solid brass 3/4" 8618C wheel finish 904S Solid brass, Hardenede 1 1/4" 8618C wheel finish steel, chrome plated 0904S Solid brass, Solid brass 1 1/4" 8618C wheel finish 904H Solid brass, Hardened 2 1/2" 8618C wheel finish steel, chrome plated 9-inch Chain Assemblies for CCL Padlocks Weight per For Shackle pack of 10 Number Used with Padlock Series Material Diameter (lbs./oz.) 2217N 904, 436, 437, 500, 95, 66 Steel, zinc plated / N 0904, 0436, 0437 Brass, dipped /8 2223N 906 Steel, zinc plated / N 0906 Brass, dipped /10 43

44 PADLOCKS Pin Tumbler 906 SERIES PADLOCKS Keyways Available: AR, BR & WR Number of Pin Tumblers: 5 Regular Key Changes: All different Masterkeying: Available when specified on order. Chain: Available with 9" chain. Steel shackle with 2223N chain assembly. Brass shackle with 02223N chain assembly. Specify on order using suffix "C" (e.g., 906C). Special Stamping: Available with case stamped to customer requirements when specified on order. Unassembled padlocks available in this series. 11/32 13/16 A 1 19 /32 23/ /4 Key Appox. Material Shackle Blank Part No/Cyl Length Stock ID No. MKYD Case Shackle Clearance No. Qty. (lbs./ oz.) 906 US4 KD Solid brass, Hardened 13/16" 4193C 10 7/4 wheel finish steel, chrome plated 906 US4 KA - 2A Solid brass, Hardened 13/16" 4193C 10 7/4 wheel finish steel, chrome plated 906 Solid brass, Hardened 13/16" 4193C wheel finish steel, chrome plated 0906 Solid brass, Solid brass 13/16" 4193C wheel finish 906S Solid brass, Hardened 1 1/4" 4193C wheel finish steel, chrome plated 0906S Solid brass, Solid brass 1 1/4" 4193C wheel finish 906W Solid brass, Hardened 1 3/4" 4193C wheel finish steel, chrome plated 0906W Solid brass, Solid brass 1 3/4" 4193C wheel finish 906H Solid brass, Hardened 2 1/2" 4193C wheel finish steel, chrome plated 0906H Solid brass, Solid brass 2 1/2" 4193C wheel finish 0906L Solid brass, Solid brass 1 1/2 4193C wheel finish 44 CCL SECURITY PRODUCTS Fax:

45 KEYLESS COMBINATION CAM LOCK CK2113, CK3113, CK4113 Materials and Finishes: Vault Knob: Die-cast zinc; zinc and yellow chromate-finished, then black polyurethane painted, plus over painted white numbers Shell: Die-cast zinc; polished plus copper and nickel-plated Cylinder & Mounting Nut: Die-cast zinc; zinc and clear chromatefinished Combination Discs: Carbon steel; case-hardened and nickel-plated MOUNTING CUTOUT CK2113 CK3113 CK4113 Distance Under Distance Under Distance Under Cam Length Head to Cam Head to Cam Head to Cam No. Cam A B B 1 B 0 B B 1 B 0 B B 1 B 0 CFL " 5 8" 7 8" 1 1 8" COF " 3 8" 7 8" 5 8" 1 1 8" 7 8" 1 3 8" DIA. Standard Cutouts same as for Disc Tumblers Cam Locks Part No/Cyl Length Stock ID No. US14 Qty. (lbs./ oz.) CK2113 CD, Carded /2 CK2113 CA, Carded /2 CK3113 CD, Carded /4 CK3113 CA, Carded /4 CK4113 CD, Carded /6 CK4113 CA, Carded /6 KEYING KITS Stock Stock Part No/Cyl Length ID No. Description Qty. C Tech Lock Recombinating Kit 1 0 B1 B B 1 B1 0 B B 1 B1 0 B B 1 1 A 1 A 1 A 3/4 3/4 5/8 CYLINDER LENGTH 7/8 7/8 CYLINDER LENGTH 1 1 /8 3/4 1 1 /8 CYLINDER LENGTH 1 3 /8 No. CK2113 No. CK3113 No. CK4113 New Packaging Accessories Furnished with Combination Cam Locks: Screw Lockwasher COF2500 1/4 Offset Cam CFL1500 Straight Cam 90 Stop Cam 3/4 Cylinder Nut Pronged Washer Collar Ring Notes: Stock items are not shaded and are available in stock quantity units only. Use Stock ID No. when ordering stock items. Made - To - Order items are shaded. For explanation of finishing symbols, refer to Page 2. 45

46 KEYING KITS & PARTS KEYING KITS FOR CABINET LOCKS CONTENTS: Service Tumblers Master Tumblers Cams Lock Retainers Cylinder Nuts Pronged Washers Escutcheons Plug Nuts Stop Cams Tumbler Springs Lock Washers NO. KK125 DISC TUMBLER KEYING KIT For rekeying CCL s 4T, B4R, and 4R type bitting requiring.095 diameter pins, and OLYMPUS D4219 keyway in.101 diameter pins. NOTE: CCL s 4T and B4R have the same bitting. CONTENTS: 100 Bottom Pins, size 0-8 ( 4R type) 100 Bottom Pins, size 0-9 ( B4R type) 100 Bottom Pins, size 0-9 (D4219 Keyway) 100 Master Pins, size 2-9 ( 4R & B4R type) 100 Master Pins, size 2-7 (D4219 Keyway) 100 Top Pins, size 0 & 5 ( 4R type) 100 Top Pins, size 1-4 (D4219 Keyway) 100 Tumbler Springs.095 diameter 100 Tumbler Springs.101 diameter 1 Tweezer 1 Follower NO. OLYMP-1 PIN TUMBLER KEYING KIT KEYING KITS Stock Stock Part No/Cyl Length Description ID No. Qty. OLYMP-1 Pin Tumbler Keying Kit KK125 Disc Tumbler Keying Kit PARTS FOR DISC TUMBLERS Part No. Description #0 thru #2 Service Disc #0-1 thru #2-1 Master Disc C-2065 Spring for Disc Tumblers * Only supplied in quantities of 100 PARTS FOR PIN TUMBLERS Part No. Description #0 thru #8 Ball End Pin Tumbler for "4R" type Bitting #2 thru #8 Master Pin Tumbler for "4R" type Bitting #0 thru #9 Ball End Pin Tumbler for "4T" & "B4R" type Bitting #2 thru #9 Ball End Pin Tumbler for "4T" & "B4R" type Bitting #0 thru #5 Driver for "4T", "B4R", "4R" type Bitting 026F757 Tumbler Spring /4" Cylinder Slide /8" Cylinder Slide /16" Cylinder Slide * Only supplied in quantities of CCL SECURITY PRODUCTS Fax: