DIAMOND DOOR PRODUCTS TECHNICAL DETAILS MARCH 2010

Transcription

1 DIAMOND DOOR PRODUCTS TECHNICAL DETAILS 1. Table of Contents 2. Overall Specifications 3. Warranty 4. Door Overall Dimensions Standard locations 5. Door Construction 6. Total Preassembled Dimensions 7. Overall Frame Dimensions (Preassembled System) 8. 5 ¾ Frame Profile (Preassembled System) 9. 5 ¾ STD Header Profile (Preassembled System) ¾ 4" x 2" Optional Head ¼ Frame Overall (Knock Down System) ¼ Frame Profile (Knock Down System) ¼ Header Profile (Knock Down System) 14. Masonry Frame 15. Masonry Frame Profile 16. Subframe System 17. Subframe Extensions 18. Flush Mount Door Installation 19. Header and Base Install 20. Attachment L-Clip 21. Anchors Non Metal Wall Applications 22. Grade 2 Cylindrical Lever Lock 23. Grade 1 Cylindrical Lever Lock 24. Mortise Lever Lock 25. Exit Device 26. Closers 27. Hinges 28. Thresholds 29. Weatherseals 30. Sweep/Drip Page 1

2 DIAMOND DOOR PRODUCTS OVERALL SPECIFICATIONS Door Door skins are manufactured of 20 gauge galvanized steel (A60) with a mechanical edge seam. With 16 gauge steel channels forming the top and bottom end closures, the face panels shall be securely welded around their entire perimeters. Doors have an insulated polystyrene core. Door skins are smooth or textured and have a straight or beveled lock edge. Hinge reinforcements are 7 gauge steel mortised for a 4 ½ x 4 ½ standard weight hinge. 161 lock ring and 86 lock reinforcements are 14 gauge, as is the standard closer reinforcement (optional). Doors are reversible and have a finish coat baked on white or antique bronze paint. 18 gauge and smooth skin doors are available. Frames Preassembled and Knock Down Frames are manufactured of 16 gauge galvanized steel (A60). Preassembled frames have a standard double rabbited 5 ¾ kerf profile, with ½ returns. Frame faces are 2". The head has an extended front face (6") designed to butt against the girt flange (2" and 4" faces for other applications). Knock down frames are various sizes to match the girt depth. Jambs may be open back or have a ½ return, while the heads have no returns (so as not to interfere with the down leg of the girt). 7 gauge steel hinge reinforcements are projection welded in 4 places, and are designed for 4 ½ x 4 ½ full mortise standard weight hinges. Strike jambs comes prepared with an ASA strike. Jambs are fully reversible and have a finish coat baked on white or bronze paint. Subframe System (Preassembled Doors and wind rated applications) Subframes are constructed of 16 gauge galvanized material (A40 min). They are 84 5/8" or 86" in height, while the width is variable based on matching the building manufacturers girt depth. Subframes have 1 ¾ flanges at both ends. Subframes are flush mounted so additional jamb trim is required (supplied by building manufacturer). The subjambs replace the need for a framed opening. When using a 2" x 2" head, an additional subframe header is added (4" x 2") to close off the interior cavity so there is a full framed opening on the inside for liner panel or other wall framing types. Other head profiles are available such as 6" x 2", and 4" x 4" (masonry). Attachment L-Clips Attachment L-clips (L angles) are used both at the header/girt connection and base. Clips are 12/14 gauge galvanized steel and come pre-punched with hole locations. Clips for preassembled doors are 5 ¾ wide x 8" tall and are attached through the subframes and into returns of the frame with self drilling screws. Top clip is attached to the girt (adjustable) with self drilling screws and the bottom clip (5 ¾ x 4") is fastened to the floor with sleeve anchors. Clips included in the knock down frame package base clip is welded in place, while the top adjustable clip is a c-channel piece 12" long with a L bracket welded at the top. Hardware Locking hardware are Southern, Parker or PDQ brands. Standard lock is typically a keyed entry lever function (US32D or US26D)). Hinges are 4 ½ x 4 ½ full mortise ball bearing hinges with non-removable pins and a silver powder coat finish. Preassembled threshold is a full 5 ¾ wide aluminum piece matching the frame depth while the knock down threshold is 3 ½. Kerf weatherseal and a Sweep/drip is included in both types of doors standard. Other hardware options are available. Packaging Knock down doors are polybagged and fully wrapped in corrugated material. Frames and hardware come supplied in a corrugated frame box. Preassembled doors are crated in wood surround. All packages are clearly marked with the PO# or job number (or other) as requested by the customer. Page 2

3 DIAMOND DOOR PRODUCTS DOOR SYSTEM WARRANTY WARRANTY Diamond Door Product doors, frames, and hardware carry a five year warranty for defective product or workmanship, provided it is not a result of negligence, caused by damage while in transit, improper installation, or other damage caused by second parties (individual hardware items may have additional warranty timeframes). The two years will commence from the date of original shipment from. Defective or damaged products must be returned to to receive credit or replacement unless otherwise instructed. If a product is not returned as required, no credit or replacement will be issued, except when special instructions are given for disposition of defective products or material. When returning product, documentation is required to identify the returned product with customer name, order number, or our invoice number, etc. A copy of the original packing slip is the best document to send. No credit or replacement can be issued if proper documentation cannot be completed. will issue an invoice for the price of the replacement component or will replace the component at no charge, depending upon the agreement between and the purchaser of the product. It is imperative that a Diamond Door Product representative and the purchaser together agree on the best course of action before this determination has been made. Do not replace the product with another from a different provider as this may cause the warranty to not be applicable. Steps to take in the event of a Warranty claim: 1. Contact. Provide a brief description of the problem and documentation of product purchase available. 2. Agree on a course of action with the representative either product replacement or credit 3. Return defective product to per their instructions. 4. After receiving the product and undergoing a thorough review to confirm defect, Diamond Door Products will issue credit. 5. In the event that a replacement product is required prior to being able to return the defective product, will send out a replacement and bill the customer. Once the old product has been confirmed defective, will credit the full amount for the new replacement product. 6. In the event the product is not considered defective, customer will be contacted and a course of remedy will be agreed upon. * Freight claims are not considered a part of the warranty process. However, will replace damaged freight items as a result of third party damage as quickly as possible. The freight claim must be initiated by the receiver to the company that transported the product within the time frames required by the carrier to file a claim. Page 3

4 DIAMOND DOOR PRODUCTS DOOR OVERALL DIMENSIONS 3070 Door 35 13/16" 41 9/ /64" 6 19/64" 72 19/64" 41 9/16 C L 83 1/8" Door shown are at standard Diamond lock/hinge locations Doors are beveled and are reversible by flipping door end over end Doors can be manufactured to meet any lock/hinge prep locations Page 4

5 DIAMOND DOOR PRODUCTS DOOR CONSTRUCTION 14 Gauge Closer Reinforcement (optional) Door Core Rigid Styrene Foam 1# Density Straight Edge Beveled Edge 7 Gauge Hinge Reinforcement 2 nd Closer Reinforcement used for reversible beveled doors 161 Lock Reinforcement 14 Gauge 86 Lock Preparation 14 Gauge Page 5

6 DIAMOND DOOR PRODUCTS OVERALL PREASSEMBLED DOOR DIMENSIONS 43 ½" (3070) 55 ½" (4070) 7'6" 1 ¾ 40" (3070) 52 " (4070) 1 ¾ * Fire-rated Preassembled units have the same dimensions Page 6

7 DIAMOND DOOR PRODUCTS 5 ¾ OVERALL FRAME DIMENSIONS 5/8" C L 42 5/16" 7" 4 9/16" Equal 42 5/16" 4 9/16" 7' 6" 4 9/16" 7" 2" Equal 36" Inside Opening 40 " Overall 2" Page 7

8 DIAMOND DOOR PRODUCTS 5 ¾ FRAME PROFILE 5 ¾ Equal Rabbet Frame ½ 2" 1 15/16" 1 7/8 1 15/16" Kerf Type Frame Profile ` 2 1/16" 1 5/8 2 1/16" Page 8

9 DIAMOND DOOR PRODUCTS 5 ¾ STANDARD HEAD 4" X 2" 4" ½ Optional Kerf Type Note that dimensions change 2" 1 15/16" 1 7/8" 1 15/16" Equal Rabbet Kerf Frame 2 1/6" 1 5/8" 2 1/16" Page 9

10 DIAMOND DOOR PRODUCTS 5 ¾ HEADER PROFILE 4" X 2" SUB ADDER Optional 4" x 2" Header Designed for low girt heights that cannot use the 2" x 2" head with added 4" x 2" subframe 6" 4" Head Subframe to match girt depth 1 3/4" 2" Optional Kerf Type Note that dimensions change Equal Rabbet Frame 1 15/16" 1 7/8" 1 15/16" Equal Rabbet Kerf Frame 2 1/6" 1 5/8" 2 1/16" Page 10

11 DIAMOND DOOR PRODUCTS 8 ¼ OVERALL FRAME DIMENSIONS 5/8" C L 42 5/16" 7" 4 9/16" 4 9/16" 7" Equal Equal 7' 2 3/8" 2 3/8" 36" Inside Opening 40 3/4" Overall 2 3/8" Page 11

12 DIAMOND DOOR PRODUCTS 8 ¼ FRAME PROFILE (KNOCK DOWN SYSTEM) 8 ¼ Welded in anchor Both ends of jamb 2 3/8" 1 15/16" 4 3/8 1 15/16" Optional Kerf Type Frame Profile 2 1/16" 4 1/8 2 1/6" Page 12

13 DIAMOND DOOR PRODUCTS 8 ¼ HEADER PROFILE (KNOCK DOWN SYSTEM) 8 ¼ 2 3/8" Optional Kerf Type Note Kerf frame has different dimensions 2 3/8" Equal Rabbet Frame 1 15/16" 4 3/8 1 15/16" Equal Rabbet Kerf Frame 2 1/16" 4 1/8 2 1/16" Optional Top Adjustable Anchor Page 13

14 DIAMOND DOOR PRODUCTS OVERALL MASONRY FRAME DIMENSIONS 5/8" C L 42 5/16" 7" 4 9/16" 4 9/16" 7" 7' 4" Equal Equal 36" Inside Opening 2" 2" 40" Overall Page 14

15 DIAMOND DOOR PRODUCTS MASONRY FRAME PROFILE 5 ¾ ½ 2" Optional Kerf Type Note Kerf frame has different dimensions Equal Rabbet Frame 1 15/16" 1 7/8" 1 15/16" Equal Rabbet Kerf Frame 2 1/16" 1 5/8" 2 1/16" 5 ¾ 4" Head Profile Page 15

16 DIAMOND DOOR PRODUCTS SUBFRAME SYSTEM Various Depths To Match Girt 7' 1" Subjambs are 16 gauge galvanized. Optional 14 gauge available. Page 16

17 DIAMOND DOOR PRODUCTS SUBFRAME EXTENSIONS Subjamb extensions can be installed flush or inverted. Extensions are undersized to fit exactly within existing subjambs Page 17

18 DIAMOND DOOR PRODUCTS FLUSH MOUNT SUBFRAME SYSTEM Wall Panel Flush Mount Application Requires Jamb/Head trim C-channel (subframe) Jamb Trim Frame Page 18

19 DIAMOND DOOR PRODUCTS HEADER & BASE INSTALL Page 19

20 DIAMOND DOOR PRODUCTS ATTACHMENT L-CLIP Top Adjustable Anchor 12 Gauge Base Adjustable Anchor 12 Gauge Page 20

21 DIAMOND DOOR PRODUCTS ANCHORS NON METAL WALL APPLICATIONS Page 21

22 DIAMOND DOOR PRODUCTS GRADE 2 CYLINDRICAL LEVER LOCK FEATURES * Cylindrical type construction * Non-handed * 2 ¾ backset * Chrome (US26D) finish (Stainless steel option) * Stainless steel latchbolt with ½ throw, deadlocking for lock functions * Steel lock chassis, zinc dichromated for corrosion resistance * Fits standard 161 door prep with thru-bolting through the door * Free wheeling vandal resistant lever * Solid cast levers * Independent lever return springs * Strike 1 ¼ x 4 7/8" ANSI * Schlage C Keyway 6 pin cylinder * Meets ANSI A117.1 accessibility (ADA) code * Meets ANSI A156.2 series 4000, grade 2 * UL listed for A label (3 hour) single swing doors * Warranty based on final product brand selection Page 22

23 DIAMOND DOOR PRODUCTS GRADE 1 CYLINDRICAL LEVER LOCK FEATURES * Cylindrical type construction * Non-handed * 2 ¾ backset * Chrome (US26D) finish (Stainless steel option) * Stainless steel latchbolt with ½ throw, deadlocking for lock functions * Steel lock chassis, zinc dichromated for corrosion resistance * Fits standard 161 door prep with thru-bolting through the door * Free wheeling vandal resistant lever * Solid cast levers * Independent lever return springs * Strike 1 ¼ x 4 7/8" ANSI * Schlage C Keyway 6 pin cylinder * Meets ANSI A117.1 accessibility (ADA) code * Meets ANSI A156.2 series 4000, grade 1 * UL listed for A label (3 hour) single swing doors * Warranty based on final product brand selection Page 23

24 DIAMOND DOOR PRODUCTS MORTISE LEVER LOCK FEATURES * ANSI A series 1000, Grade 1 * UL listed for A rated (3) hour fire door * ANSI A117.1 American Disabilities Act (ADA) * Cases are cold rolled formed steel.090. thick Zinc dichromate plated * Lever Non-handed, field reversible, solid forged brass * Trim roses, escutcheon, turns (solid forged brass) * Latchbolt latch ¾ throw (brass), deadbolt 1" throw (brass), antifriction * 2 ¾ backset * US26D Finish * Schlage (SCC) 6 pin solid brass, C keyway * Warranty based on final product brand selection Page 24

25 DIAMOND DOOR PRODUCTS EXIT DEVICE FEATURES * ANSI A156.3 Grade 1 * Rail fits 28" to 36" doors * Aluminum powder coat finish painted * Latch stainless steel 3/4" throw * Deadlocking latchbolt standard * 2 ¾ backset * Adjustable strike with slotted holes * Surface mounted * Exterior sectional free-wheeling lever trim * Exterior trim is chrome (US26D) finish * Warranty based on final product brand selection Page 25

26 DIAMOND DOOR PRODUCTS CLOSERS FEATURES * ANSI Grade 1, UL listed (ADA Compliant) * installed closers are parallel arm application * Single piece cast aluminum body * Aluminum powder coat painted finish * Forged steel main arm for superior strength, adjustable extension arm * Door opening to 180 degrees * Non-handed * Adjustable hydraulic backcheck to provide cushioning and prevents uncontrolled opening of the door * Two independent non-critical adjusting valves for sweep and latch to provide consistent closing speeds * Warranty based on final product brand selection Page 26

27 DIAMOND DOOR PRODUCTS HINGES Ball Bearing NRP Plain Bearing NRP FEATURES * 4 ½ x 4 ½ size * Standard weight hinges * Non-removable pin for higher security * Five knuckle with button tip and plug * Ball bearing standard * ANSI * Includes metal screws for installation * Powder coat finish for corrosion resistance Page 27

28 DIAMOND DOOR PRODUCTS THRESHOLDS Threshold for Preassembled Door System 5 ¾ wide Threshold for Knock Down Door Systems 3 3/8" wide Page 28

29 DIAMOND DOOR PRODUCTS WEATHERSEAL Kerf Type Weatherseal Additional Weatherseal Types Page 29

30 DIAMOND DOOR PRODUCTS SWEEP/DRIP Door Sweep Aluminum with Vinyl Seal Additional Sweep Types Special Order Page 30