Quarter-Turn Pr20.1 L18

Transcription

1 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18, low profi le 15 Nm IP 65/67 Specially low profile Quarter-Turn. RH or LH application. This Quarter-Turn consists of three basic parts which can be combined to suit your application. By using the fl at external seal and the O-rings the quarter-turn is water- and dust-tight according to IP65 or IP67 DIN EN On request parts can be assembled. The Quarter-Turn, can be screwed into the cutout with the pre-assembled cam. Grounding by grounding nut or grounding clip. Housing: zinc die, chrome plated or black Nut: steel, zinc plated Grounding nut: zinc die, untreated Grounding clip: stainless steel a) Housing Ø32 zinc die, chrome plated zinc die, black see page with nut with grounding nut with nut and grounding clip b) Inserts 02.48, c) Cams c1) Special cams 02.80, 02.81, Keys 09.10, Other accessories , , Optional: Water-and dust-tight according to IP65 by: O-ring 12x2mm d) Flat external seal Water- and dust-tight according to IP67 by additional: O-ring 10x2mm Assembling of cam, without O-ring Assembling of cam, with O-ring Tel. / Phone: +49 (0) 2333/837-0 Fax: +49 (0) 2333/ /

2 1-100 Quarter-Turn Pr20.1 L18 for cutout 20.1, length Nm IP 65/67 Quarter-Turn, RH or LH application. The Quarter-Turn consists of three basic components a) to a4), b) and c) which can be combined to suit your application. On request parts can be assembled by DIRAK. A pre-assembled Quarter-Turn can be installed through the cutout. Housings with extended bodies see product system Housing: zinc die, chrome plated or black or PA, black Nuts: steel, zinc plated Grounding nut: zinc die, untreated Grounding clip: stainless steel a) Housing Ø28 zinc die, chrome zinc die, black PA black see page plated with nut with grounding nut with nut and grounding clip a1) Housing Ø30x4 with nut with grounding nut a2)housing Ø32x6 Housing with nut e.g with grounding nut with nut and grounding clip a3) Housing 30x6 with nut with grounding nut a4) Blind housing Ø28x4 with nut b) Inserts 02.48, c) Cams c1) Special cams 02.80, 02.81, d) Keys 09.10, e) Other accessories , , Optional: Water-and dust-tight according to IP65 by: f) O-ring 12x2mm g) Flat external seal Water- and dust-tight according to IP67 by additional: h) O-ring 10x2mm Assembling of cam, without O-ring Assembling of cam, with O-ring Assembling cam 90 to handle without O-ring Assembling cam 90 to handle with O-ring

3 1-100 Quarter-Turn Pr20.1 L18 for cutout 20.1, length 18 see page b) Inserts c) Cams c1) Special cams 02.80, 02.81,

4 1-101 Inserts Pr20.1 for Quarter-Turn cutout 20.1 M6 4Nm Square 6mm Square 7mm Square 8mm Square 8mm slotted Triangular 6.5mm CNOMO Type Triangular 7mm Triangular 8mm Triangular 9mm EDF a) Insert zinc die, chrome plated zinc die, black PA black, zinc die, core Double bit 3mm pin Double bit 5mm pin Hex 7/16" Hex. 10mm

5 1-101 Inserts Pr20.1 for Quarter-Turn cutout 20.1 M6 4Nm Socket hex. 6mm Socket hex. 8mm Socket hex. 10mm Socket head 5/16" 3mm pin Square socket 6mm Square socket 7mm Square socket 8mm Daimler Benz type Slotted 2x4mm Crown type Slotted recessed coinproof Crescent Czech FIAT Insert GDF 10x5mm France Keys for insert a) see product system b) Insert zinc die, chrome plated zinc die, black PA black, zinc die, core Star knob Ø c) Wing knob d) Wing knob (only for housing Ø28) Assembling cam 90 to wing knob see product system Further versions on request 02.49

6 1-102 Cams L35/45 lengths 35 and 45 Cams: steel, zinc plated H at housing length (GI): GI12 GI18 Gl20 GI22 GI30 GI32 GI36 GI40 GI42 GI46 GI50 GI56 GI60 GI ** ** ** ** ** ** ** ** ** ** * * * *Price and delivery time on request! **PLEASE NOTE: These cams connot be used with slide shoe product system 1-103SL. Part No. see page 2-point cam, steel, zinc plated Cam with ramp H=18, L= Hooked Cams Other cams 02.82, Cam for alternative solution Stainless steel cams

7 1-260 Hooked Cam Hooked cam suitable for all 200-series latches and handles. Please note: When assembling or by DIRAK, please indicate the locking direction of the cam only clockwise operation. Hooked cam: steel, zinc plated Part No. a) b) c)