UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
|
|
|
- Nelson Norris
- 5 years ago
- Views:
Transcription
1 Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO : 2013 EN ISO : 2013 ISO : 2013 ASTM D AS : N to 1800 N Tensile Strength -Grab test BS EN ISO :2014 EN ISO :2014 ISO :2014 ASTM D N to 1800 N Tear strength By Elmendorf Apparatus Tear Strength -Single Rip (Single tear) BS EN ISO :2000 EN ISO :2000 ISO :2000 ASTM D (2013) BS EN ISO :1998 BS EN ISO : 2000 ISO : 2000 BS EN ISO : 2003 ASTM D gf to 5120 gf 15 N to 1800 N Seam Strength BS EN ISO : 2014 BS EN ISO : 2014 ASTM D a AS : 2004 Resistance to Seam Slippage BS EN ISO : 2004 BS EN ISO : 2004 ASTM D BS 3320: N to 1800 N 15 N to 1800 N
2 Last Amended on - Page 2 of 22 Textile- Fabric/Garment Determination of elasticity of fabrics BS 4952: 1992 straight specimens (2.1 to 2.4) BS EN : 2005 (Method A) ASTM D ASTM D (Reapproved 2012) 1 cm to 55 cm Bursting strength (Pneumatic) BS EN ISO : 1999 EN ISO : 1999 ISO : 1999 BS 4768: kpa to 1000 kpa by Diaphragm bursting tester (hydraulic) ASTM D BS EN ISO : kpa to 1000 kpa Pilling resistance Pill Box BS BS EN ISO : 2001 EN ISO : 2000 ISO : 2000 (Grade 1 to 5) by Martindale tester BS EN ISO : 2000 EN ISO : 2000 ISO : 2000 ASTM D (Grade 1 to 5) by Random Tumble pilling tester ASTM D e-2 (Grade 1 to 5) Abrasion resistance BS EN ISO : 1998 EN ISO : 1998 ISO : Cycles to Cycles Upto 50%
3 Last Amended on - Page 3 of 22 Textile- Fabric/Garment ( Abrasion continued ) Accelerator method A AATCC 93: 2011 Upto 50% Mass per unit area (Weight) ISO 3801: 1977 BS 2471: 2005 BS EN 12127: 1998 EN 12127: 1998 ASTM D a (2013) AS : g/m 2 to 1000 g/m 2 Yarn Number (Based on short length the specimens) Warp & Filling / Count SOP-PHY-8: Ne to 120 Ne Woven fabric ASTM D EN : 1994 BS EN : 1994 Knitted fabric ASTM D BS 5441 (1988) Crease recovery BS EN 22313: 1992 AATCC 66: 2008 (2 threads per cm to 80 threads per cm) (5 threads per inch to 200 threads per inch) (2 Wales & coarse / inch to 250 Wales & coarse / inch) (5 per cm to 100 per cm) Upto 180º Determination of width and length fabrics BS EN 1773: cm to 300 cm Fabric Width ASTM D (Reapproved 2012) AS : cm to 200 cm
4 Last Amended on - Page 4 of 22 Textile- Fabric/Garment Bow and Skew ASTM D (Reapproved 2012) BS 2819: % to 50 % Flammability 16 CFR 1610: 2012 (Part A) 1 s to 100 s Water Repellency AATCC 22: 2014 ISO 4920: 2012 BS EN 24920: Rating to 100 Rating 1 Rating to 5 Rating Water Absorbency AATCC 79: 2010 Upto 60 sec 2. Textiles and Textiles Accessories Determination of Sharp Points under a force of 4.45 N (1 Pound) 16 CFR : 2011 ASTM F (Section 4.9) EN71-1: 2011, Amd3 : 2014 (Section 8.12) Determination of Sharp Edges under a force up to 8.90 N (2 Pound) 16 CFR : 2011 ASTM F (Section 4.7) EN71-1: 2011, Amd3 : 2014 (Section 8.11) Determination of Small parts Chocking Hazards test (Small parts cylinder of 31.7 mm inner diameter) 16 CFR 1501: 2009 ASTM F (Section 4.6) EN71-1: 2011, Amd3 : 2014 (Section 8.2)
5 Last Amended on - Page 5 of 22 Textiles and Textiles Accessories Determination of Small parts Torque test upto 9 kg-cm (upto 7.8 inch pounds) ASTM F (Section 8.8) EN71-1: 2011, Amd3: 2014 (Section 8.3) 16 CFR (e) Determination of Small parts Tension test upto 294k N (Upto 30 kg or 66 pounds) ASTM F (Section 8.9) EN71-1: 2011 Amd3: 2014 (Section 8.4) 16 CFR (f) Determination of Flammability of Rugs and Carpets (Larger) 16 CFR 1630: 2010 Determination of Flammability of Rugs and Carpets (Smaller) 16 CFR 1631: 2010 Fabric Propensity to surface fuzzing and pilling Modified Martindale method Fabric Propensity to surface fuzzing and pilling Pilling Box Method Impact resistance of Plastic sew through Buttons GB/T : 2008 GB/T : 2008 ASTM D a (Grade 1 to 5) (Grade 1 to 5)
6 Last Amended on - Page 6 of 22 II. PLASTICS, RUBBER & LEATHER 1. Leather Tensile Strength Tear Strength Flexing Endurance (Flexo Meter Method) ISO 3376: 2011 BSEN ISO 3376: 2011 BSEN ISO 20344: 2004 (Amd1: 2011, Cl.6.4) ISO : 2011 BSEN ISO : 2011 ISO : 2002 BSEN ISO (Amd1: 2011, Cl.6.3) ISO : 2011 BSEN 13512: N to 1800 N 15 N to 1800 N 500 Cycles to 250,000 Cycles Thickness ISO 2589: mm to 5mm Apparent Density ISO 2420: kg/m³ to 1000 kg/m³ Sole Bond Peeling Strength BS : 1978 ISO 17708: 2003 BSEN ISO (Amd1: 2011, Cl.5.2) 15 N/mm to 1800 N/mm
7 Last Amended on - Page 7 of 22 III. TOYS 1. Toys with Small Parts Small part test Drop test Torque test Tension test Compression test Flexure Test Cl.4.4, Cl.5.2 Cl Cl Cl Cl Cl.5.24 ASTM F , Cl CFR : CFR 1501: 2012, Cl Toys with Edges Sharp Edge Test Torque test Cl.4.6, Cl.5.8 Cl Cl Cl ASTM F , Cl CFR : 2012 Sharp Edge Test Cl.4.7 Cl Toys with Points Sharp Point test Cl.4.7, Cl 5.9 ASTM F , Cl CFR : 2012
8 Last Amended on - Page 8 of Toys with Projections Torque test Tension test Compression test Flexure test Cl.4.8, Cl Cl Cl Cl Cl Normal use test Tension test Compression test ASTM F , Cl.4.8 Cl Toys with Protruding Component Sharp Edge Sharp point Cl.4.9 Cl Cl.8.11 Cl Toys ith Metal Wire and Rod Flexure test Tension test Sharp Edge Sharp point Cl.4.9 Cl Cl Cl.5.8 Cl.5.9
9 Last Amended on - Page 9 of 22 Toys ith Metal Wire and Rod Sharp edge test Sharp point test Flexure test ASTM F Cl.4.10 Cl.4.7 Cl.4.9 Cl.8.12 Sharpness of Point Cl.4.8 Cl Toys with Flexible Plastic Sheeting Thickness Cl.4.3, Cl.5.3, Cl.6 Cl Cl mm to 1 mm Thickness test ASTM F Cl.4.12, Cl Toys with Glass & Marbles Impact Test Sharpness of edges Sharpness of Points Cl.4.5, Cl.5.7 Cl.8.11 Cl.8.12 ASTM F Cl.4.33, Cl.5.3.1, Cl CFR : 2011
10 Last Amended on - Page 10 of 22 Toys with Glass & Marbles Flexure test s Cl Cl Cl Cl Cl Cl Cl Toys Comprising Monofilament Fibers Length Cl.5.9, Cl cm to 300 cm 10. Toys with Expanding Materials Small part cylinder test Tension test Impact Test Dimension test Cl.4.6 Cl.8.2 Cl.8.3 Cl Cl.8.14 Small part Cl Cl Cl Cl Cl.5.2
11 Last Amended on - Page 11 of Toys - Parts Moving against each other / Folding Mechanisms and Hinges Driving Mechanism / Springs Sharpness of edges Sharpness of point Drop test Impact test Folding & Sliding Mechanism Normal use test Tension test Compression test Locking mechanism Cl.4.10 Cl.8.11 Cl.8.12 Cl.8.18 ASTM F , Cl.4.13 Cl Cl , Cl Toy pushchairs and perambulators Folding mechanism test Other toy with folding mechanisms Folding & sliding Mechanism Accessibility part of component Cl , Cl , Cl.5.20 ISO :2014 Cl Mouth Actuated and other Toys intended to be put in the Mouth Small part cylinder test Soaking test Torque test Tension test Cl.4.11 Cl.8.2 Cl.8.3 Cl
12 Last Amended on - Page 12 of 22 Mouth Actuated and other Toys intended to be put in the Mouth Small part Tension test Torque test Cl.5.2 Cl Cl Cl.5.22 Cl Toys Balloons Thickness Thickness Small Part Tension test Torque test Cl.4.12, Cl.4.3, Cl ASTM F Cl.4.31, Cl CFR : 2011 Cl.4.5.6, Cl.4.10, Cl.4.25 a, b, d Cl.5.10 Cl.5.2 Cl Cl mm to 1 mm 0.001mm to 1 mm 14. Toys - Enclosures / Confined Spaces/ Toy Bag Sharpness of edges Sharpness of point Torque test Tension test Drop test Impact test Compression test Comply With Enclosure Cl. 4.14, Cl , Cl.4.4 Cl.8.11 Cl.8.12 Cl.8.3 Cl Cl. 8.8 Cl (Cl a)
13 Last Amended on - Page 13 of 22 Toys - Enclosures / Confined Spaces/ Toy Bag Normal use test Impact test Torque test Tension test Compression test ASTM F Cl Cl. 8.6 Folding & Sliding Mechanism Folding Mechanisms Cl , Cl Heavy Immobile Toys / Stability of stationary floor toy/toys intended to bear the mass of child Normal use Testing Impact Test ASTM F Cl.4.15, Cl Cl.8.6 Stability test Cl.5.12, Cl Cl.5.22
14 Last Amended on - Page 14 of 22 Heavy Immobile Toys / Stability of stationary floor toy/toys intended to bear the mass of child Sharpness of edges Sharpness of point Static strength Stability Test Break Performance Test Cl. 4.16, Cl.4.15 Cl Cl.8.11 Cl.8.12 Cl.8.21 Cl.8.23 Cl.8.26 Strength Of Toys Scooter Steering Tubes Determination Speed Test Cl.8.27 Cl.8.29 Small ball & suction cup Kinetic Energy Test Cl.4.17 Cl Cl Cl.8.3 Cl & Joules to 10 Joules 16. Projectile Toys Normal use Testing Impact Test Kinetic Energy Test ASTM F , Cl.4.21 Cl.8.6 Cl Joules to 10 Joules Kinetic Energy Test Small part Cl.5.15 Cl Cl Joules to 10 Joules
15 Last Amended on - Page 15 of 22 Projectile Toys Cl Cl Aquatic Toys and Inflatable Toys Small Part test, Cl.4.18 Cl.8.3 Cl Cl Toys Acoustics Emission Sound pressure Level Test Normal use Test Impact Test Emission Sound pressure Level Test Sound pressure level test Cl.4.20 Cl.8.28 ASTM F , Cl.4.5 Cl. 8.5 Cl. 8.6 Cl.8.19 Cl.5.25, Cl db to 135 db 0.05 db to 135 db 0.05 db to 135 db
16 Last Amended on - Page 16 of Toys Attached to Food Small Part test Impact Test Small Ball and suction cup test Cl.4.25 Cl.8.2 Cl.8.3 Cl Cl Toys Length of Cords, Chains and Electrical Cable in Toys / Straps intended to be worn fully or partially around the neck / Cords, Straps and Elastics / Cords Cord cross-sectional dimension Length of cords, chains electrical cables Normal use Testing Test for Loops and Cords Cl.5.4 Cl.8.20 Cl.8.40 ASTM F , 2, 3, 5 of Cl.4.14 Cl Cl.8.22 Determination of cord thickness Self retracting pull cords Cl , Cl
17 Last Amended on - Page 17 of Liquid Filled Toys Leakage test Cl.5.5, Cl.8.15 Cl.4.24, Cl.4.21, Cl Hemispheric- Shaped Toys Dimensions & Volume Impact Test Soaking Test, Cl.5.12 Cl.8.3 Cl ASTM F , Cl.4.36 Cl Abuse tests Cl.4.5.8, Cl Toys With Suction Cups Impact Test Small ball and suction cup test EN 71-1:2014, Cl.5.13 Cl.8.3 Cl Cl
18 Last Amended on - Page 18 of Toys -Nails & Fasteners / Wheels, Tires And Axles Toys -Nails & Fasteners / Wheels, Tires And Axles Normal use Testing Tire Removal Test Small Part test ASTM F Cl.4.11, Cl Cl Cl.8.11 Cl Toys With Holes, Clearance and Accessibility of Mechanisms Normal use Testing ASTM F , Cl.4.18 Cl Hole and clearance test ISO :2014 Cl Toys with simulated protective devices Impact Test for face Impact Test ASTM F , Cl.4.19 Cl Cl.4.17
19 Last Amended on - Page 19 of Test with Pacifiers Test for pacifiers ASTM F , Cl CFR 1511: Squeeze toys, Rattles and certain other toys / Certain toys with spherical ends Cl SOR: , Cl.M-09 Template test Cl.4.5.1, Cl.5.3 ASTM F Cl.4.23, Cl.4.24, Cl Cl CFR : CFR : 2011 ASTM F , Cl CFR (a)(17) 16 CFR : Toys Balls Small ball test Cl.5.4 Cl Cl Cl
20 Last Amended on - Page 20 of 22 Toys Balls Small ball & suction cup test Tip over Test Impact Test Cl.4.22, Cl.5.10 Cl.8.32 Cl.8.3 Cl.8.4 Cl Toys Pompoms ASTM F , Cl.4.35 Cl.8.16 Template test Cl.5.24 Cl Toys Flammability Burning rate Thermal & Flammability Hazard ASTM F , Cl.4.2 Annex A5, A6 16 CFR : 2011 ISO : 2014 IS : 1999 BS EN 71-2: 2014 AS/NZS ISO : 2009 Cl.5.1, Cl.5.2, Cl.5.3, Cl.5.4 Cl.5.5, Cl.5.7, Cl.5.8 SOR: Sections 32, 33 & 34 Schedule 5, 6,7 1s to 1800 s
21 Last Amended on - Page 21 of Battery Operated Toys Normal use Testing Flexure Test ASTM F Cl.4.25 Cl Cl Stuffed and Beanbag Type Toys Tension test ASTM F Cl.4.27,.1 Cl.5.2, Cl Toys stability & over load requirements Normal use Testing & Abuse Test Test for Over load of ride on toys & toys Seats ASTM F Cl , Cl Cl Cl Toys Scooter Sharpness of edges Sharpness of point Static strength Stability Test Break Performance Test Cl Cl.4.15 Cl Cl.8.11 Cl.8.12
22 Last Amended on - Page 22 of 22 Toys Scooter Strength of Toys Scooter Steering Tubes Cl.8.21 Cl.8.23 Sharp Edge Test Sharp Point test Stability & Over load Test Static strength for toy scooter Break Performance for toys scooter Strength of toy scooter tube Cl.4.29 Cl.5.8 Cl.5.9 Cl Cl.5.26, Cl.5.28, Cl X-X-X-X-X-X-X-X-X-X-X-X-X-X-
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
Report number: EN71 - S Date:
Pagina 1 van 9 Distelweg 88 1031 HH Amsterdam The Netherlands Tel. : +31 20 4947783 Fax : +31 20 6366131 Email: qc@koopmanint.com Report number: EN71 - S47000040-606025-1 Date: 09-06 - 2016 Age grading:
Sýnishorn. Part 1: Safety of toys. Safety aspects related to mechanical and physical properties
INTERNATIONAL STANDARD ISO 8124-1 Fourth edition 2014-12-15 Safety of toys Part 1: Safety aspects related to mechanical and physical properties Sécurité des jouets Partie 1: Aspects de sécurité relatifs
Report number: W Date:
Koopman International b.v. Pagina 1 van 9 Distelweg 88 1031 HH Amsterdam The Netherlands Tel. : +31 20 4947783 Fax : +31 20 6366131 Email: qc@koopmanint.com Report number: W17280310-448629-14 Date: 07-13
Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 MECHANICAL Valid To: May 31, 2018 Certificate Number:
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES (FAR EAST), LTD Unit 703-704 7 th Floor, Riley House 88 Lei Muk Road Kwai Chung, Hong Kong David Chung Phone: (852) 242-37161
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause
1. EN71 - Part1: Mechanical and Physical Properties Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause Test method : EN71-1:
NOT SPECIFIED. TESTS CONDUCTED: AS REQUESTED BY THE APPLICANT, FOR DETAILS REFER TO ATTACHED PAGE(S)
NUMBER: SZHJ094788 APPLICANT: DATE: Jan 15, 2007 SAMPLE DESCRIPTION: ONE (1) SET OF SUBMITTED SAMPLE SAID TO BE : ITEM ME EVA INTERLOCKING PUZZLE MAT (EVA INTERLOCKING FLOOR MAT). LABELLED AGE GROUP PACKAGING
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TTL LABORATORIES - A DIVISION OF 41 Illinois Avenue Warwick, RI 02888-3007 Ben Miranda Phone: 401 562 1333 MECHANICAL Valid To: March 31, 2019 Certificate Number:
UL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
ADDRESS : 5/F., NO NAIYAN RD, JIAOJIANG, TAIZHOU, ZHEJIANG, CHINA. TURN AROUND TIME : 19-Jun-2012 to 25-Jun-2012, 4 working days
TEST REPORT Page : 1 of 7 APPLICANT : KINGDOM TOYS & GIFTS CO., LTD ADDRESS : 5/F., NO.71-2 71-7 NAIYAN RD, JIAOJIANG, U, ZHEJIANG, CHINA U KINGDOM TOYS & GIF SAMPLE DESCRIPTION : WOODEN TOYS ITEM NO.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
TEST REPORT Report No.: R-cn E-S2 Page 1 of 9
Report No.: R-cn5-1505057-E-S2 Page 1 of 9 Applicant Name Applicant Address : WINHAND TOYS MANUFACTURING CO.,LTD : NO.106 HAIFA ROAD, HAICANG INDUSTRIAL DISTRICT, XIAMEN, CHINA. The following information
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bay Area Compliance Laboratories Corp.(ongguan) No 69 Pulongcun Puxinhu Industry Zone Tangxia ongguan Guangdong People s Republic of China
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
September 16, 2016 VIA . UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082
September 16, 2016 VIA EMAIL UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Arthur: This letter is to inform you that
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that CertifiGroup, Inc. 901 Sheldon Dr. Cary,
11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
F 427/3 Strength Tester for Yarns, Hanks and Fabrics
F 427/3 Strength Tester for Yarns, Hanks and Fabrics In its basic form the F 427/3 Strength Tester has since its introduction proved its worth with clients throughout the world. Its various testing programmes
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MONTOI, S.A. DE C.V. Libramiento Noreste Km.27 Escobedo, CP 66052 Nuevo Leon, Mexico Rodolfo Caballero Phone: 52-818154030 Email: Rodolfo.Caballero@Mattel.com
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES
TESTING SERVICES OFFERED BY ATIRA TEXTILE & CHEMICAL TEXTILE TESTING LABORATORIES Ahmedabad Textile Industry s Research Association P.O. Ambawadi Vistar, Ahmedabad- 380 015 Phones : 91-79-26307921-7922-7923,
Accessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
Grade A. Evo EV-19 EV-5 EV-4 EV-2 EV-18 EV-14 EV-10 EV-22 EV-20 EV-21 EV-1 EV-23 EV-24 EV-25. Discover more at inscapesolutions.
Grade A Evo EV-2 EV-4 EV-5 EV-9 EV-10 EV-11 EV-14 EV-18 EV-1 EV-19 EV-20 EV-21 EV-22 EV-23 EV-24 EV-25 Evo Application Fan Specifications Contents Weight Per Unit 100% polyester 300 g/m² Performance Colorfastness
AutomAtic Strength tester AUTODYN
Automatic Strength TESTER AUTODYN AUTODYN Automatic Strength Tester Description Automatic Strength Tester, up to 24 positions, for testing the tensile strength of yarns. It can also test yarns, hanks and
Labthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
This document is expired, please contact Jennifer Buoniconti at for updated protocol information or about UL s Services.
Protocol Printed: May 2, 2016 10:24 am UL Standard Product Requirement Protocol ID: 8887 Approved by: Lardner-Stone, Anne Approved Date: May 31, 2013 Modified Date: Jun 04, 2014 Category: Item: Country:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
Laboratory Bureau Veritas Consumer Products Services Lanka (Pvt.) Ltd., No. 570, Galle Road, Katubedda, Moratuwa, Sri Lanka
Last Amended on - Page 1 of 14 I. TEXTILE & TEXTILE AUXILIARIES 1. Textiles- Fabric/Garment Colorfastness to Crocking AATCC 8: 2013 BS EN ISO 105-X12: 2002 AATCC 116: 2013 Colorfastness to Perspiration
DILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
JINAN HENGRUIJIN TESTING MACHINE CO.LTD
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer
Engineering Excellence STANDARDS. By Standard Body
Engineering Excellence STANDARDS By Standard Body 6th June 2017 2 TESTING INSTRUMENTS Standard Instrument Standard Instrument 16 CFR 1500.51-53 Tension Test AATCC 106 AATCC 107 AATCC 117 AATCC 133 AATCC
The Groz-Beckert central laboratory. Overview and service specifications
The Groz-Beckert central laboratory Overview and service specifications Material testing Determination of the chemical composition of inorganic materials Emission spectroscopy (Fe, Ni, Al, Cu basis) C,
Sealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
Sapphire Cubicle System. Spec Sheet. Sapphire 52 H & 65 H. skutchi.com cubicles.cc. Vol DESIGNS. inc.
Sapphire Cubicle System Spec Sheet 2019 Sapphire 52 H & 65 H skutchi.com cubicles.cc Vol. 1 2019 DESIGNS The gorgeous, modern Sapphire System enables you to create endless solutions. Fabricate private
Automotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
D-LAB Specifications. Your Partner for textile testing and quality assurance
D-LAB Specifications Your Partner for textile ing and quality assurance D-LAB is your neutral partner for reliable quality management and evaluation in all textile areas. Producers of home textiles, furnishing
MAIN LAB CONDITIONED ROOM FLAMMABLES FTT SNAPRITE MMT SWEATING GUARDED HOT PLATE ROTAWASH AIRPERM ROTAPILL PILLING AND SNAGGING TESTER
1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST 1 1 1 1 1 1 0 M 1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST The innovative measures skin touch properties of textiles objectively and quantitatively.
BS EN 14465:2003 Test Report
Report Ref: LEHTX00601372 Date Received: BS EN 14465:2003 Test Report Buying Division: 20/10/2011 Date Issued: 24/10/2011 Company Name & ddress Contact Name FLMEPROOFING LIMITED UNITS 1 & 2 LYON INDUSTRIL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
Geoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
TRACKSAFE INFLATABLE BARRIER SYSTEM T.I.B.S. Champion Products Limited 95d Attleborough Road Nuneaton Warwickshire CV11 4JQ United Kingdom
TRACKSAFE INFLATABLE BARRIER SYSTEM T.I.B.S. Champion Products Limited 95d Attleborough Road Nuneaton Warwickshire CV11 4JQ United Kingdom 1 I N D E X 1 Introduction 3 2 Dimensions 3 3 Design and Construction
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
ProMace/ProView MACE SNAG TESTER & ASSESSMENT CABINET
PRODUCT UPDATE Extraordinary Testing Solutions ProMace/ProView MACE SNAG TESTER & ASSESSMENT CABINET We believe our ProMace to be the safest, most efficient, accurate and repeatable Mace Snag Tester available
MITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
Asian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
Type. Call +44 (0)
Disposable Coverall and Lab Coat Cleanroom Apparel Integrity Cleanroom Apparel products are designed and manufactured to meet the stringent demands of the cleanroom industry. Manufactured from a lightweight,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate
COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
T1838 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fisher-price.com.au Consumer Information WARNING Prevent serious injury or death from falls or sliding out: Always use the restraint system
This tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
SWING DOOR SOFT ENCLOSURE (part# 16733)
800-643-7332 americanlandmaster.com This kit is for use with all fullsize, 2 passenger ALM utility vehicles. SWING DOOR SOFT ENCLOSURE (part# 16733) NOTE TOOLS REQUIRED Drill 1/4 Drill Bit 7/16 Wrench
OX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
Be sure to read this page before using and after re-assembling the Hit-Air. Key Box. Slide cover. Key Ball
Specifications,shapes and how to use may change without prior notice. AIRBAG JACKET ALL-IN-ONE AIRBAG USER S GUIDE For Horseback Riding B-type Thank you for using the Hit-Air. For your safety, peace of
All Prices listed are in US Dollars 35% Discount on lab list prices, if not listed in this document
APPAREL PRICE LIST ACCESSORIES PRICE LIST COSMETICS PRICE LIST SOCKS AND HOSIERY PRICE LIST JEWELRY PRICE LIST AT HOME - HOME TEXTILES PRICE LIST ADULT FOOTWEAR PRICE LIST CHILDREN FOOTWEAR PRICE LIST
Dodge opening upper console w/non-opening middle bottom Installation
2009-12 Dodge 40-20-40 opening upper console w/non-opening middle bottom Installation Step 1. Prepare the driver and passenger seat for installation by temporarily removing the headrests. Recline the backrests
The Revised ASTM F963 Toy Safety Standard: What s Changed and What you Need to Know
The Revised ASTM F963 Toy Safety Standard: What s Changed and What you Need to Know Alan Kaufman Senior Vice-President, Technical Affairs The Toy Association January 10, 2018 Hong Kong Changes impact numerous
Geomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
STRENGTH AND ELONGATION, BREAKING OF WOVEN CLOTH; GRAB METHOD
December 28, 1989 SUPERSEDING METHOD 5100 July 20, 1978 1. SCOPE STRENGTH AND ELONGATION, BREAKING OF WOVEN CLOTH; GRAB METHOD 1.1 This method is intended for determining the breaking strength and elongation
ENGLISH MF-7500(D)/UT37
ENGLISH MF-7500(D)/UT7 Instruction Manual CONTENTS!. SPECIFICATIONS... @. AT THE BEGINNING... #. Installing the accessories.... Installing the presser lifting cylinder.... Installing the air regulator....
child trailer Burley d lite, Encore, Solo and LE Tiger d lite Owner s Instruction and Safety Manual Designed For One Or Two Children (Optional)
Burley d lite, Encore, Solo and LE Tiger d lite Owner s Instruction and Safety Manual child trailer Designed For One Or Two Children (Optional) (Optional) (Optional) child trailer Burley d lite, Encore,
CIMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDINGS MATERIALS 1. Cement & Pozzolanic Material Fineness (Dry Sieving) IS 4031(Part 1): 1996 (RA 2011) 10 % to 100 % Fineness (Blain Air Permeability) IS 4031(Part
GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
![For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]](/thumbs/89/97509625.jpg "For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]")
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
Thermal Wraps. GT Exhaust Accessories Installation and Operation Manual. Rev. A. Copyright 2012 GT Exhaust, Inc. All Rights Reserved
Thermal Wraps GT Exhaust Accessories Installation and Operation Manual Rev. A Copyright 2012 GT Exhaust, Inc. All Rights Reserved Published: December 20, 2012 NOTICE The instructions herein must be expressly
Second Correlating Revision No. 3 NFPA [ Section No ]
![Second Correlating Revision No. 3 NFPA [ Section No ]](/thumbs/76/73230477.jpg "Second Correlating Revision No. 3 NFPA [ Section No ]")
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
Standard Test Methods for Rubber Property Adhesion to Flexible Substrate 1
Designation: D 413 98 (Reapproved 2002) e1 Standard Test Methods for Rubber Property Adhesion to Flexible Substrate 1 This standard is issued under the fixed designation D 413; the number immediately following
WATER TESTERS. Water Resistance and Repellency Testers
WATER TESTERS Water Resistance and Repellency Testers Testing for Water Resistance and Repellency Different fabric applications require different test methods. Apparel, Awnings, Boat and Vehicle Covers,
Elite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCHAP LABORATORY SERVICES, LLC 17309 Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone: 616 846 6530 MECHANICAL Valid To: June 30, 2020 Certificate Number:
Discipline Chemical Testing Issue Date Certificate Number T-2217 Valid Until Last Amended on
Last Amended on 19.05.2014 Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric C/F To Laundering Home & Commercial : Accelerated, Modified 2A Cold (27 0 C), 2A Warm (49 0 C) AATCC 61: 2013
amicus task, general use & guest
amicus task, general use & guest reinforced nylon scuff-resistant plastic " base 0mm ( 1/") hard (carpet casters) reinforced nylon twin-wheeled and hooded 1/" hard plastic glides soft glides have soft
AR77.31-P-1001QA Remove/install soft top canvas MODEL 209.4
AR77.31-P-1001QA Remove/install soft top canvas 14.3.03 MODEL 209.4 1 Bolts 4 Soft top canvas 6 Rivet 2 Roof peak 5 Tension cable 49 Fabric tape 3 Rubber seal P77.31-2159-09 4 Soft top canvas 9 Zipper
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
FILL-ON-SITE FOR REMOTE LOCATION PROJECTS
ECOBAG Geotextile Pipeline Weight (GPW) ECOBAG GPW is an easy-to-install, high-strength, free-standing pipeline set on weight that provides predictable performance in a variety of installation environments.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of
A2LA has accredited RELIABLE ANALYSIS INC. Troy, MI for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International ISO/IEC 17025:2005
NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents
Reference: Various TIA 13-1 (SC 13-8-21/TIA Log #1098) Tentative Interim Amendment NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents 2013 Edition Pursuant to Section 5 of the NFPA
child trailer Burley Bee and Honey Bee Owner s Instruction and Safety Manual Designed For One Or Two Children Burley Bee model shown Honey Bee
child trailer Burley Bee and Honey Bee Owner s Instruction and Safety Manual Designed For One Or Two Children Honey Bee Burley Bee model shown child trailer Burley Bee and Honey Bee Owner s Instruction