OX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
|
|
- Colin Norton
- 6 years ago
- Views:
Transcription
1 Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission rate of flexible films, sheets, foils and packages. It can test 3 specimens in one operation with average results. ISO , ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K OX2/230 i-oxtra 7700 Oxygen Transmission Rate Test System This system is based on the coulometric sensor method and available for the OTR test of flexible films, sheets, foils and packages. It can test 3 specimens in one operation with independent results. ISO , ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, JIS K VAC-V1 VAC-V1 is based on the differential pressure method and can be used to measure gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible films. It can test O2, N2 and CO2. ISO , ISO 2556, ASTM D1434, JIS K VAC-V2 i-gastra 7100 This equipment is based on differential pressure method and used to measure Gas (O2, N2 or CO2) transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible materials. It is equipped with 3 test cells for different specimens with independent results. ISO , ISO 2556, ASTM D1434, JIS K VAC-V3 This tester is used to measure gas (O2, N2 or CO2) transmission rate as well as solubility coefficient, diffusion coefficient, and permeability coefficient of flexible films. It is advaced with 6 test cells, which are in two groups with different accuracy. ISO , ISO 2556, ASTM D1434, JIS K VAC-VBS This tester is based on differntial pressure method and used to measure gas permeability of plastic films, sheeting, paper, foils and etc. This equipment can test 3 specimens with average results in one operation. ISO , ISO 2556, ASTM D1434, JIS K7126-1
2 DM2/330 This is an advanced gas permeability tester. The equipment is based differential and equal pressure method and conforms to various international standards. ISO , ISO , ISO 2556, ASTM D3985, ASTM F2622, ASTM F1307, ASTM F1927, ASTM D1434 BTY-B2P This is specially designed for battery separators. It can have 3 equivalent specimens tested simultaneously with average test results. ISO 5636, SJT G2/130 Container G2/130 is based on differential pressure method, and can be used to measure gas transmission rate of flexible containers, including various bottles of carbonated drinks, juice, tea and packages of edible oil, dairy products, washing supplies and metal containers. OR2/410 Organic Gas Transmission Rate Test System OR2/410 is professionally applicable to the quantitative determination of organic gas transmission rate of films, composite films, sheeting, and packages. G2/131 i-gastra 7210 G2/131 is based on differential pressure method to measure gas permeability of plastic films, sheeting, paper and etc. It is adopts Labthink patent design and can test 3 specimens with independent results. ISO 2556, ISO , ASTM D1434, JIS K G2/132 i-gastra 7200 G2/132 is designed to measure gas permeability as well as solubility coefficient, diffusion coefficient and permeability coefficient of flexible films. It is adopts Labthink patent design and can test 3 specimens with average results in one operation. ISO 2556, ISO , ASTM D1434, JIS K W3/330 i-hydro 7500 Water Vapor Transmission Rate Test System This test system is based on the electrolytic sensor method, which are available for the WVTR test of flexible films, sheets, foils and packages. This equipment adopts Labtink patent design and can test 3 specimens with independent results. ISO , DIN
3 W3/230 i-hydro 7900 Water Vapor Transmission Rate Test System This test system utilizes the infrared sensor method to test the WVTR of flexible films, sheets, foils and packages. It can test 3 specimens with independent results. ISO , ASTM F1249, TAPPI T557, JIS K7129 W3/030 i-hydro 7300 Water Vapor Transmission Rate Tester This tester is based on gravimetric method (cup method) and can be used to determine WVTR of flexible films, sheets, foils and etc. It is equipped with 3 test cups for accurate test. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN , JIS Z0208 W3/031 i-hydro 7310 Water Vapor Transmission Rate Tester This tester is based on the gravimetric method and available for the WVTR test of flexible films, sheets and foils. It is equipped with 3 test cups and can test 3 specimens independently. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN , JIS Z0208 W3/130 i-hydro 7400 Water Vapor Transmission Rate Tester This Tester is based on the humidity sensor method, are designed to measure the WVTR of flexible films, sheets, foils and etc. It has 3 test cups, which can test independently. ISO , ASTM E398, TAPPI T523, JIS K7129 W3/060 i-hydro 7320 Water Vapor Transmission Rate Test System This test system is based on the gravimetric method to determine the WVTR of flexible films, sheets and foils. It is advaced with 6 test cups for 6 different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN , JIS Z0208 W3/062 Water Vapor Transmission Rate Test System This test system is based on the gravimetric method to determine the WVTR of flexible films, sheets and foils. It is advaced with 6 test cups for 6 different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN , JIS Z0208 W3/0120 Water Vapor Transmission Rate Tester W3/0120 is based on the gravimetric method, which is available for water vapor transmission rate test of flexible films and sheets. It is advaced with 12 test cups for different specimens. ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN , JIS Z0208
4 TSY-W3 Water Vapor Permeability Tester This equipment utilizes electrolytic detection method. It is a basic type and designed for WVTR test of flexible films, sheets and foils. ERT-01 i-resitest 8100 Evaporation Residue Constant Weight Tester This tester is professionally designed for the precise mass determination of dissolved substances of samples. ISO , DIN GBT , GB/T , GB/T , GB/T , GB/T , GB/T XLW(B) Auto Tensile Tester XLW(B) Tensile Tester is a basic type to measure physical force of plastic films, textiles, adhesive tapes and etc. It can be used for tensile strength and elongation, peeling force, seal strength test and so on. GB/T , GB8808, GB/T , GB/T17200, GB/T2790, GB/T2791, GB/T2792, QB/T2358 XLW Auto Tensile Tester XLW is professional designed for tensile strength, elongation test for plastic films, sheeting materials. This equipment can also be used for peeling, seal strength, tearing test for extention. XLW(M) i-strentek 1200 Auto Tensile Tester This tester is professionaly designed for flexible materials physical properties test. It is designed according to various international standards and can be used for tensile strength, elongation, peeling, seal strength test and etc. XLW(PC) Auto Tensile Tester XLW(PC) is professional designed for tensile strength, elongation test, peeling test and other physical properties test for flexible materials with high accuracy (0.5%) and extra-long stroke. ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 XLW(EC) i-strentek 1100 Auto Tensile Tester This tensile tester is newly designed with features of bidirectional movement for tensile and compression test. It is also be used for open force for bottle caps, puncture test, peeling test and etc with high accuracy (better than 0.5%) ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113
5 XLW(G6) Auto Tensile Tester XLW(G6) is used to measure tensile strength and elongation rate of flexible materials. This instrument is equipped with 6 test stations can measure 6 spciements in one time. MED-01 i-meditek 1300 Medical Packaging Tester This tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges. BLD-200N Auto Stripping Tester BLD-200N can be used for peeling and stripping tests of adhesives, protective films, release paper, laminated films, leatheroid, woven bags, films and paper. ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113 GB/T , GB8808, GB/T , GB/T 17200, GB/T 2790, GB/T 2791, GB/T 2792, QB/T 2358 NLW-20 Adhesive Tensile & Shear Tester NLW-20 is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives. ISO 4587, ASTM D1002, ASTM D2095, ASTM D3165, ASTM D2339, JIS K6850, JIS K6849 XYD-15K Box Compression Tester XYD-15K is designed for measurement of compressing resistance, shape change and stacking capability of cartons, beehive crates, and other packages. ISO 12048, ASTM D642, ASTM D4169,TAPPI T804, JIS Z0212 i-boxtek 1700 Box Compression Tester i-boxtek 1700 is newly designed for the determination of compressive resistance, deformation and stacking capability of cartons and beehive crates. ASTM D4169, ASTM D642, TAPPI T804, ISO 12048, JIS Z0212 NJY-20 Digital Torque Tester NJY-20 is an manual torque tester to measure open force and closure force of the caps of bottles, suction and flexible tube packages. ASTM D2063, ASTM D3198, ASTM D3474
6 HST-H3 Heat Seal Tester HST-H3 is used to seal specimen for further determination of seal temperature, pressure and time of plastic films. It is equipped with up and low sealing draws. ASTM F2029 HST-H6 Heat Seal Tester HST-H6 is designed to measure seal temperature, seal pressure and seal time of flexible films. This is a basic type with one sealing jaw. ASTM F2029 GHS-03 Gradient Heat Seal Tester GHS-03 is designed for the determination of heatsealability of plastic films, composite films, coated paper, and other sealing films under certain sealing speed, pressure and 5 different temperatures. ASTM F2029 CLASSIC 513 Gradient Heat Seal Tester CLASSIC 513 is designed for the determination of heatsealability of plastic films, composite films, coated paper, and other sealing films under certain sealing speed, pressure and 5 different temperatures. ASTM F2029 HTT-L1 i-thermotek 2500 Hot Tack Tester This tester is used to determine hot tack property test for plastic films, laminated films and other packaging films. Meanwhile, it is also used for peel, shear, tension and other test items for adhesives and laminated films. ASTM F2029, ASTM F1291 PSST-100 Portable Heat Seal Strength Tester PSST-100 is a portable heat seal strength tester for plastic films, composite films and other materials. This instrument is suitable for on-site quantitative inspection. QB/T 2358 MXD-01 Coefficient of Friction Tester MXD-01 is designed to measure static and kinetic coefficients of friction of plastic films, sheeting, textiles and other materials, according to GB GB 10006
7 MXD-01A Coefficient of Friction Tester MXD-01A is used to measure static and kinetic coefficients of friction of plastic films, paper, rubber, textiles and non-wovens, according to ASTM D1894. ASTM D1894 MXD-02 i-coftek 3300 Coefficient of Friction Tester This is used to precisely determine static and kinetic coefficient of friction of plastic films, paper and paperboard, rubber, textiles with high accuracy (0.5 of FS). ISO 8295, ASTM D1894, TAPPI T816 COF-P01 Inclined Surface Coefficient of Friction Tester COF-P01 is used to measure the static coefficient of friction on a inclined surface of paper, cardboard, plastic films, sheets, and conveyor belt and etc. ASTM D202, ASTM D4918, TAPPI T815 FPT-F1 i-coftek 3500 Friction & Peel Tester This is designed for the friction coefficient test of films as well as peel strength test of adhesives. ISO 8295, ISO , ASTM D1894, ASTM D4917, ASTM D3330, TAPPI T816, TAPPI T549 CHY-C2A Thickness Tester This thickness tester is based on the contacting method, is available for the thickness test of specimens with LCD display. CHY-CA i-thickness 4400 Thickness Tester This Thickness Tester is designed with automatic specimen feeding feature, which is used for thickness test of specimens within 12mm. CHY-CB i-thickness 4100 Thickness Tester This thickness tester is designed to precisely measure thickness of plastic films, sheeting, paper and other materials within 12mm. Test results include maximum, minimum and average value. ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702 ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702 ISO 4593, ISO 534, ISO 3034, ASTM D374, ASTM D1777, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702
8 SLY-S1 i-lacera 5500 Tear Tester This is based on Elmendorf method to measure tearing strength of plastic films, foils, textiles and non-woven materials. ISO , ISO , ISO 1974, ASTM D1922, ASTM D1424, ASTM D689, TAPPI T414 BMC-B1 Falling Dart Impact Tester This is designed to measure impact resistance property of plastic films, paper and other packaging materials using free falling dart method. ISO , ASTM D1709, JIS K FDI-01 i-freefall 5100 Falling Dart Impact Tester This tester is designed to measure impact resistance property of plastic films, sheeting, paper and foils. It is based on free falling dart method and equipped wtih LCD display. ISO , ASTM D1709, JIS K FIT-01 i-pendum 5200 Pendulum Impact Tester This tester is professionally designed for plastic films to measure impact resistance property by pendulum method. ASTM D3420, NF T RSY-R2 Film Free Shrink Tester This tester is designed for the heat shrinkage test and size stability test of films in liquid medium at various temperatures. ASTM D2732 FST-02 i-thermotek 2710 Film Thermal Shrinkage Tester This tester is based on ISO and designed for determination of shrinking force, contracting force and shrinkage ratio of heatshrinkable films. ISO 14616, DIN MFY-01 Leak Tester MFY-01 is designed for gross leak test of packages for food, drugs, medical instruments, daily chemical products, cars, electronic components, stationeries and other industrial products. ASTM D3078
9 LSSD-01 i-leaktek 6600 Leak and Seal Strength Tester This tester is used to measure leak and seal strength of packages. It can be used to conduct burst, creep and creep to failure test. ISO 11607, ASTM F1140, ASTM F2054 HGA-02 Headspace Gas Analyzer HGA-02 can provide accurate and fast evaluation of the volumes and proportions of O2 and CO2 in sealed packages. HGA-03 i-gasatek 6900 Package Headspace Analyzer This analyzer provides accurate and fast evaluation of the volumes and proportions of O2 and CO2 in sealed packages on production lines, at warehouses or in laboratories. RGT-01 i-vacupack 6100 Vacuum Packaging Analyzer This analyzer provide the quantitative analysis of seal performance and residual oxygen for vacuum packages. FDT-02 i-flexdura 9100 Flex Durability Tester This tester can simulate the kneading and creasing behaviors of films happened during production, processing and transportation, by which the flex durability of samples can be determined. ASTM F392 CZY-G Primary Adhesive Tester CZY-G utilizes rolling ball method to measure the primary adhesive property of adhesives. JIS Z0237, GB/T 4852 CZY-6S Lasting Adhesive Tester CZY-6S can be used to measure the durable adhesion of pressure-sensitive adhesives. ASTM D3654, JIS Z0237
10 SBG-80 D65/A Standard Light Source SBG-80 D65/A is equipped with double light source and is available for the color evaluation and comparison. SPS-80T Double Light Source Viewer SPS-80T is designed for the all-day color evaluation and comparison. MCJ-01A Rub Tester MCJ-01A is used to measure abrasion resistance of surface layers of printed materials. GB/T 7706 RT-01 Ink Rub Tester RT-01 is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. ASTM D5264, TAPPI T830 YGJ-02 Adhesive Tape Roller YGJ-02 is kind of sample preparing device, working with BLJ-02 to test ink fastness. JIS C2107, JIS Z0237, GB/T 7707 BLJ-02 Disk Stripping Tester BLJ-02 is professionally used to test ink fastness of plastic films and printed materials. JIS C2107, JIS Z0237, GB/T 7707 GC-6890 Gas Chromatograph GC-6890 is used to measure residual solvent, smell analysis, and solvent purity for packaging industry or other related industries.
11 GC-7800 Gas Chromatograph GC-7800 is widely used to test the relative indexes of various materials, gases, smell, residue, and cigarette packages, because of its powerful functions and high sensitivity. GC-7800 Gas Chromatograph with Autosampler GC-7800 with autosampler is designed for gas chromatographic analysis and control of testing organizations, research institutions, packaging companies as well as food and pharmaceutical industries. FT-F1 Fogging Tester FT-F1 is professionally applicable to the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts at high temperature conditions. ISO 6452, DIN 75201, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X83231, NES M0161, D , GM 9305P, TSM 0503G TQD-G1 Air Permeability Tester TQD-G1 is professionally applicable to the determination of air permeability of decorating materials used in cars, e.g. polyurethane, expanded plastics, PVC, leather, textiles, nonwoven and other materials. ISO 9237, ISO 4638, ISO 5636, ASTM D737, TAPPI T460, JIS P8117 i-process 6200 Leak Test and Data Processing System i-process 6200 is professionally designed for the on-site leakage test of packages used for food, pharmaceuticals and other industries. ASTM D3078 i-process 6610 Leak & Seal Test and Data Processing System i-process 6610 is professionally used for the on-site measurement of seal strength, seal quality, bursting pressure, compression resistance and leakage of flexible packages, aseptic packages and many others. ISO 11607, ASTM F1140, ASTM F2054 i-process 6910 Headspace Gas Test and Data Processing System i-process 6910 is professionally used to test the volume and proportion of O2 and CO2 left in sealed packages.
12 i-process 9200 Volume & Weight Analyzer Test and Data Processing System i-process 9200 is professionally used to test weight and volume of packaging bags and bottles. i-process 1600 Torque Test and Data Processing System i-process 1600 is professionally designed for the on-site torque value determination of caps used in bottles, spout pouches and flexible tube packages. ASTM D2063, ASTM D3198, ASTM D3474
Labthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
More informationLabthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
More informationINTERNATIONAL PERMEATION MEASUREMENT STANDARDS
INTERNATIONAL PERMEATION MEASUREMENT STANDARDS Area Sales Manager - Europe Permeation Testing Systems MOCON GmbH Standardisation organisations ASTM: ASTM International, formerly known as American Society
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
More informationLaboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationMIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
More informationPresident For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
More informationUL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5]
More informationAccessories for Force Test Stands, Universal Testers and Tensile Testers
Accessories for Force Test Stands, Universal Testers and Tensile Testers Compatible with: Fixtures, General, Page 1 MT-500 MT-1500 MT-2500 PEEL TEST FIXTURE, 180 DEGREE, ASTM D-903 Force Test Stand Universal
More informationServices Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
More informationJINAN HENGRUIJIN TESTING MACHINE CO.LTD
1. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 2 2. WDW Series Microcomputer Control Electronic Universal (Tensile) Testing Machine... 3 3. WDW Series Microcomputer
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
Page 1 of 15 Wire terminal grips u All dimensions shown as IN [MM] For securing wire terminals, cables, connectors, and other samples for pull testing. ØA B C D G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationAUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00
AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested
More informationMetal package testing
Metal package testing Gauges for dimensional measurement, and testers for package integrity and failure analysis. Manual and semiautomatic solutions for ensuring quality in food, beverage, and aerosol
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
More information11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
More informationSGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
More informationVertical Tensile Machine
Vertical Tensile Machine Code: 11.202.100 For the determination of force, tensile resistance, elongation and tensile energy absorption (TEA) in paper or tissue. Standards: ISO 1924-1, ISO 1924-2, ISO 1924-3,
More informationAutomotive Testing and Engineering Services
UL PERFORMANCE MATERIALS Automotive Testing and Engineering Services OEM Testing according to OEM Delivery Specifications performance materials for automotive applications Automotive Supplier Raw Materials
More informationAhmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
More informationVegetable based lubricating & degreasing solvent with high solvent power
Vegetable based lubricating & degreasing solvent with high solvent power PRODUCT DESCRIPTION IMPACT is Vegetable based degreasing solvent with high solvent power, demonstrated by a Kauri Butanol index
More informationASTM Consensus Standards The Latest in Packaging Testing. Presented by: Dhuanne Dodrill President Rollprint Packaging Products, Inc.
ASTM Consensus Standards The Latest in Packaging Testing Presented by: Dhuanne Dodrill President Rollprint Packaging Products, Inc. ASTM Overview Established in 1898 Voluntary, Full-Consensus Standards
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationVentureClad Insulation Jacketing Tapes 1577 Series
VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate
More informationKhushboo Scientific Private Limited
+91-8048602052 Khushboo Scientific Private Limited https://www.indiamart.com/khushbooscientific/ We are a distinguished Importer, Distributor, Exporter of Scientific. These products find application in
More informationTest report P E. J. Magner Dipl.-Ing. (FH) N. Machill
Kiwa Polymer Institut GmbH Quellenstraße 3 D-65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 8464-2-E Testing order: Tests on the coating Wecryl 124
More informationName of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
More informationThis tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur UP 410 Laminate TI 216 Laminate system for concrete and steel substrates Base Polyester resin, unsaturated Material Group Membranes Tank- / vessel
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
More informationMaterial Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationHANATEK FRICTION TESTER. MODEL 6010 (Obsolete) INSTRUCTION MANUAL. Replaced by:
HANATEK FRICTION TESTER MODEL 6010 (Obsolete) INSTRUCTION MANUAL Replaced by: http://www.hanatekinstruments.com/advanced-friction-tester.html March 2004 2 CONTENTS SECTION No. Page No. 1 Contents 2 2 Introduction
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
More informationACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
More informationAsian Test Equipment. Laboratory Solution by AN ISO 9001:2008 CERTIFIED COMPANY. Tensile Strength Tester. Indentation Hardness Tester
AN ISO 9001:2008 CERTIFIED COMPANY Tensile Strength Tester Indentation Hardness Tester Box Compression Tester Bursting Strength Tester Specific Gravity Balance Hot Air Oven Toxicity Tester Flexometer Melt
More informationComparison of IG Testing Standard. IGMA Summer Meeting August 8, 2004
Comparison of IG Testing Standard IGMA Summer Meeting August 8, 2004 1 The Task Compare the new Harmonized standards to: Old ASTM stds. Canadian stds. CEN stds. (Europe) ISO std. (proposed) 2 The Standards
More informationTensile (Reinf. Geomembranes)
POLYMERIC GEOMEMBRANES Asperity Height ASTM D7466, GRI GM12 Thickness (PVC) ASTM D1593 Thickness (Smooth PE) ASTM D751, D5199, ISO9863-1 Thickness (Textured PE) ASTM D5994 Weight ASTM D751, ISO 9864 Composition
More informationMechanical Testing Solutions for Lithium-Ion batteries in Automotive applications
Intelligent Testing Mechanical Testing Solutions for Lithium-Ion batteries in Automotive applications A. Koprivc testxpo 2017 Mechanical testing solutions for Li-Ion batteries Contents Lithium-ion batteries
More informationAnnex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationAccreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
More informationAccreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-SR Mechanical applied electrically conductive laminate system Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates
More informationTLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS
A brand of TLS ADVANCED SOLUTIONS FOR QUALITY CONTROL AND TESTING MATERIALS TECHLAB SYSTEMS, S.L. is a company which specialises in designing, developing, manufacturing and marketing advanced technologies
More informationRaw Materials for Pressure-Sensitive Adhesives
Raw Materials for Pressure-Sensitive Adhesives Table of Contents 03 Best adhesion properties for all applications 04 05 Labels 06 Primers for Plastic Films 07 Graphic Films 08 09 Specialty Tapes 10 11
More informationStandard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
More informationForce Measurement Testing Systems
Force Measurement Testing Systems The Better Solution Starrett Innovation. Helping You Make Your Products Better. Our new Starrett force measurement systems exemplify the craftsmanship and quality synonymous
More informationPE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
More informationAppendix A.1 Calculations of Engine Exhaust Gas Composition...9
Foreword...xi Acknowledgments...xiii Introduction... xv Chapter 1 Engine Emissions...1 1.1 Characteristics of Engine Exhaust Gas...1 1.1.1 Major Components of Engine Exhaust Gas...1 1.1.2 Units Used for
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
More informationDELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
More informationBS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39
COLOR OPTIONS Please Call For Availability SPECIALTY WHITE BLACK BROWN GREY CLEAR BS-02 BS-02-SD FEEL THE DIFFERENCE Of Our Soft Durometer Line *SD = Optional Soft Durometer Domestic Phone: 856-345-7650
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
More informationRAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels
RW 2518 Revision 1 Page 1 of 9 Date Printed 15-Apr-08 Tyco Electronics Cheney Manor, Swindon. UK RW 2518 Revision 1 RAYMARK LABELS SCOPE This Quality Assurance Specification establishes the quality standard
More informationPreventive Maintenance and Calibration Program: IDM provides OEM services:
RUBBER Industry Product Guide Preventive Maintenance and Calibration Program: The IDM Preventive Maintenance and Calibration (PM&C) program has been designed to make the maintenance and calibration of
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips
G50 90 Degree Peel Test Fixtures G50 test fixtures are ideal to test inflexible adherends for which a 180 peel test is not suitable because of the cracking, breaking or delamination of the adherend. The
More informationSecond Correlating Revision No. 3 NFPA [ Section No ]
Second Correlating Revision No. 3 NFPA 1991 2015 [ Section No. 2.3.2 ] 2.3.2 ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428 2959. ASTM
More informationHiTec Paper. Barrier Paper
www.mitsubishi-paper.com HiTec Paper. Barrier Paper Mitsubishi HiTec Paper Passion for First Class HiTec Papers As a leading international supplier of direct thermal, inkjet, carbonless, label and barrier
More informationFECR. World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments
FECR World Class Testing Equipments An ISO 9001 Certified co. Paper & Packaging Equipments Bursting Strength Testing Humidity Chamber / Conditioning Chamber Bursting Strength is reliable index of the strength
More informationRECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS
Phone : +32 2 742 96 82 Fax : +32 2 732 12 18 e-mail : recyclass@plasticsrecyclers.eu website: www.recyclass.eu RECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS Standard Laboratory Practice Version 1.0 Published
More informationC224-E031A. Autograph AGS-J. Shimadzu Table-top Type Universal Tester
C224-E031A Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions in a compact body! AGS-J Autograph AGS-J Shimadzu Table-top Type Universal Tester All the necessary functions
More informationPTFE Lined Pipe and Fittings
Allied Supreme Corp. - 1 - PTFE Lined Pipe and Fittings Allied Supreme Corp. - 2 - Index Specification For PTFE Lined Pipe and Fittings..3 PTFE Lined Pipe 7 PTFE Lined 90 Elbow. 8 PTFE Lined 45 Elbow.9
More informationSTS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
More informationSurface Protective Systems
Surface Protective Systems Technical information Oxydur VEL-U Laminate system for concrete and steel substrates Base Vinyl ester resin Material Group Membranes Tank- / vessel linings - laminates Description
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationBEVS New Products 2019
BEVS Industrial Co.,Ltd Headquarter Shanghai Address: Floor 3, Building A, No. 257 Junye Road, Huangpu District, Guangzhou, 510530, China Tel: +86 20 29038636 Fax: +86 20 89851362 Email: sales@bevsinfo.com
More informationSingle Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover
SECTION 1 SAE100R1 Page 6 SAE100R2 Page 6 SAE100R2XP Page 7 SAE100R2GP Page 7 Quick Reference Taipan Hose Single Wire Smooth Cover Double Wire Smooth Cover Extra Pressure Double Wire Wrapped Cover SAE100R2H
More informationHigh performance chain oils
High performance chain oils High performance chain oils for extreme temperatures BECHEM Lubrication solutions for industry PICTOGRAMS As the oldest German manufacturer of industrial lubricants, BECHEM
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationProduct information. cuturon. neobond pretex
Product information cuturon neobond pretex pretex impregnated special papers neobond robust synthetic fibre papers cuturon versatile nonwovens PRODUCT SPECIFICATION High-quality, impregnated special paper:
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips. G Width 130 mm (5.1 )
G50 Peel Test Fixture 90 Degrees with optional angle adjustment laminated surface coatings films packaging and rigid backings The G50 test fixture is ideal to test inflexible adherends for which a 180
More informationINDUSTRIAL TAPE PRODUCT GUIDE
INDUSTRIAL TAPE PRODUCT GUIDE POLYESTER FILM TAPES Ideal Tape s complete line of pressure-sensitive polyester film tapes are backed by more than 100 years of coating experience. These products are widely
More informationUL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationDILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationHigh performance chain oils
High performance chain oils High performance chain oils for extreme temperatures BECHEM Lubrication solutions for industry PiCtogramS As the oldest German manufacturer of industrial lubricants, BECHEM
More informationCrastin PBT Thermoplastic polyester resins
Crastin PBT Thermoplastic polyester resins Product guide and properties Start with DuPont Engineering Polymers DuPont s registered trademark Crastin PBT Thermoplastic polyester resins Introduction CRASTIN
More informationMAIN LAB CONDITIONED ROOM FLAMMABLES FTT SNAPRITE MMT SWEATING GUARDED HOT PLATE ROTAWASH AIRPERM ROTAPILL PILLING AND SNAGGING TESTER
1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST 1 1 1 1 1 1 0 M 1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST The innovative measures skin touch properties of textiles objectively and quantitatively.
More informationWashability & Abrasion. Elcometer 5135 & Rotary Abrasers. elcometer.com
Elcometer 5135 & 5155 elcometer.com Rotary Abrasers 1 Elcometer 5135 & 5155 Taber Rotary Abrasers Used primarily in the testing of ceramics, plastics, textiles, metals, leather, rubber and painted, lacquered
More informationMATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
More informationCertificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
More informationTesting based on UL 1667 (Tall Institutional Carts for Audio, Video and TV-Type Equipment)
MEDICAL PRODUCT DESIGN AND MANUFACTURING 114 DOUGLAS ROAD EAST OLDSMAR, FLORIDA 34677 OFFICE: 813.889.9250 800.899.5278 FAX: 813.886.9342 WWW.PROMEDICA-USA.COM Risk Assessment and Testing Results for Promedica
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationDELO -ML DB133 anaerobic and UV-curing adhesive
DELO -ML DB133 anaerobic and UV-curing adhesive Base - Modified urethane acrylate - one-component, solvent-free - dual-curing adhesive Use - for impact-resistant metal bondings - for mixed bondings with
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More informationDual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive
3 Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive Technical Data Sheet June 2012 General Description Applications 3M Dual Lock Reclosable Fasteners are positive-locking, blind
More informationFIXED CONE VALVE. The flow is guided by the inner vanes, in order to decrease the vortex and the vibration;
BEI JI NG JOI NTFLOW SYSTEM CO. FI XEDCONEVALVE The Fixed cone Valve is typically operated by a manual, electric or hydraulic actuator mounted above the bevel gear. The bevel gear transmits torque to the
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing...............................FIT-7-2 Metric Industrial Tubing.............................FIT-7-3 Inch D.O.T. Tubing.................................FIT-7-3
More information