Second Correlating Revision No. 3 NFPA [ Section No ]

Size: px

Start display at page:

Download "Second Correlating Revision No. 3 NFPA [ Section No ]"

Alisha Pierce
6 years ago
Views:

1 Second Correlating Revision No. 3 NFPA [ Section No ] ASTM Publications. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA ASTM D747, Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam, ASTM D751, Standard Methods of Testing Coated Fabrics, 2006 (2011). ASTM D1776, Standard Practice for Conditioning and Testing Textiles, 2008e1. ASTM D2136, Standard Test Method for Coated Fabrics Low Temperature Bend Test, ASTM D2582, Standard Test Method for Puncture Propagation Tear Resistance of Plastic Film and Thin Sheeting, ASTM D4157, Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method), ASTM D6413, Standard Test Method for Flame Resistance of Textiles (Vertical Test), 2013b. ASTM F392, Standard Test Method for Flex Durability of Flexible Barrier Materials, ASTM F739, Standard Test Method for Resistance of Permeation of Liquids and Gases Through Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact, ASTM F903, Standard Test Method for Resistance of Protective Clothing Materials to Penetration by Liquids, ASTM F1001, Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials, ASTM F1052, Standard Test Method for Pressure Testing of Vapor Protective Ensembles, ASTM F1154, Standard Practice Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity Durability of Chemical Protective Suit Ensembles and Ensemble Components, ASTM F1301, Standard Practice for Labeling Chemical Protective Clothing, 2011e1. ASTM F1342, Standard Test Method for Resistance of Protective Clothing Materials to Puncture, 2005 (2013) e1. ASTM F1358, Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance, ASTM F1359, Standard Test Method for Measuring the Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Using Under a Shower Spray While on a Mannequin, ASTM F1790, Standard Test Methods for Measuring Cut Resistance of Materials Used in Protective Clothing, ASTM F1930, Standard Test Method for Evaluation of Flame Resistant Clothing for /6

2 Protection Against Flash Fire Simulations Using an Instrumented Manikin, ASTM F2010, Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test, ASTM F2412, Standard Test Methods for Foot Protection, 2011 ASTM F2413, Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear, ASTM F2700, Standard Test Method for Unsteady State Heat Transfer Evaluation of Flame Resistance Resistant Materials for Clothing with Continuous Heating, ASTM F2913, Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester, Submittal Date: Thu May 14 13:38:34 EDT 2015 Committee The Correlating Committee notes that the chemicals are not specified for chemical Statement: penetration resistance testing of closures as specified in Section Previously, the list of chemicals was specified as part of the Chapter 7 performance criteria. The Technical Committee moved the challenge lists to the respective test methods, but did not make this change for chemical penetration resistance testing. The reference to ASTM F1001 is needed to accomplish this change. Committee Comment No. 93 NFPA [Section No ] /6

3 ] Second Correlating Revision No. 5 NFPA [ Section No * Protective cover(s) constructed using a material that meets all the applicable performance criteria in Section 7.2 shall be provided to protect the suit closure assembly from direct chemical splashes. The cover(s) shall allow access to the closure(s) for donning, doffing, and inspection. Submittal Date: Thu May 14 13:41:57 EDT 2015 Committee The Correlating Committee noted the negative comment of one voter on Second Statement: Revision 70 and has incorporated clarification of the requirement for a cover over the suit closure assembly. SR 70 NFPA /6

4 Second Correlating Revision No. 1 NFPA [ Section No ] Vapor protective ensembles and elements shall be tested for overall heat transfer performance as specified in Section 8.18 and shall have an average predicted body burn rating of not more than 25. Submittal Date: Thu May 14 13:33:05 EDT 2015 Committee The Correlating Committee notes that the criteria in this paragraph should have Statement: been removed during the preparation of the second draft as the committee made the decision to continue the use of the current overall ensemble flash fire test /6

5 ] Second Correlating Revision No. 4 NFPA [ Section No Procedure. Penetration resistance testing of suit closure assemblies shall be conducted in accordance with ASTM F903, Standard Test Method for Resistance of Protective Clothing Materials to Penetration by Liquids, Procedure C, using the following modifications: (1) All tests shall be conducted at 25 C, ±3 C (77 F, ±5 F). (2) The test cell shall be modified to accommodate the shape of the suit closure assembly without affecting other parts of the test procedure. The Plexiglas shield shall be omitted from the test cell. (3) Use of blotting paper at the end of the test shall be permitted to assist in the visual observation of liquid penetration. Visually observed chemical on the blotting paper shall constitute failure of this test. (4) An observation to determine specimen penetration shall be made at the end of the chemical contact period. (5) Testing shall be conducted against the 15 liquid chemicals specified in ASTM F1001, Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials. Submittal Date: Thu May 14 13:40:39 EDT 2015 Committee The Correlating Committee notes that the chemicals are not specified for chemical Statement: penetration resistance testing of closures as specified in Section Previously, the list of chemicals was specified as part of the Chapter 7 performance criteria. The Technical Committee moved the challenge lists to the respective test methods, but did not make this change for chemical penetration resistance testing. The proposed paragraph provides the needed specification for adding the chemical challenge chemicals as part of the test method /6

6 Second Correlating Revision No. 2 NFPA [ Section No ] 8.26 Manikin Test Specimens Three specimens shall be tested Fabrics to be tested shall be used to construct the standard garment design specified in of ASTM F1930, Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin Procedure Specimens shall be tested in accordance with ASTM F1930, Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin, using an exposure heat flux of 84 kw/m 2 (2.02 cal/cm 2 sec) with an exposure time of 6 seconds The manikin shall be dressed in 150 g/m 2 (4.5 oz/yd 2 ) (± 5 percent), jersey knit, 100 percent cotton underwear briefs and short sleeved crew neck T shirts before the garment specimen is placed on the manikin. Submittal Date: Thu May 14 13:36:33 EDT 2015 Committee The Correlating Committee notes that the criteria in this paragraph should have Statement: been removed during the preparation of the second draft as the committee made the decision to continue the use of the current overall ensemble flash fire test /6

NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents

Reference: Various TIA 13-1 (SC 13-8-21/TIA Log #1098) Tentative Interim Amendment NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents 2013 Edition Pursuant to Section 5 of the NFPA