Engineering Excellence STANDARDS. By Standard Body
|
|
|
- Evelyn Gordon
- 5 years ago
- Views:
Transcription
1 Engineering Excellence STANDARDS By Standard Body 6th June 2017
2 2 TESTING INSTRUMENTS Standard Instrument Standard Instrument 16 CFR Tension Test AATCC 106 AATCC 107 AATCC 117 AATCC 133 AATCC AATCC 15 AATCC 16 - Option 3 AATCC 165 AATCC 22 AATCC 8 AATCC TM 132 AATCC TM 151 AATCC TM 190 AATCC TM 61 AATCC TM 86 AATCC/ASTM TS-010 AATCC/ASTM TS-015 adidas Group 4.07 adidas Group 4.09 adidas Group 4.10 adidas Group 4.11 adidas Group 4.12 Version 01 adidas Group 4.13 Version 02 adidas Group 4.14 adidas Group 4.15 adidas Group 4.27 adidas Group 4.27 Version 03 adidas Group 4.40 adidas Group 5.09 adidas Group 5.11 adidas Group ST-05 ( ) adidas Group ST-07 Arcadia AG10 Arcadia AG26 Arcadia AG kgf Arcadia AG29 (07.12) Arcadia AG30 (07.12) Arcadia AG31 - ii Arcadia AG31 Part(i) (07.12) Arcadia AG32 Arcadia AG33 Arcadia AG34 Arcadia AG35 Arcadia AG36 (07.12) Arcadia AG37 (07.12) Arcadia AG38 (07.12) Arcadia AG39 (07.12) Arcadia AG61 Arcadia AG75 Spray Rating Tester ASTM D (2015) ASTM D i 10.3 & 10.4 ASTM D ii 10.5 ASTM D ASTM D ASTM D3512 ASTM D3759M Procedure A ASTM D3759M Procedure B ASTM D3759M-05 (2011) ASTM D ASTM D3939 ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D ASTM D (2010) ASTM D ASTM D (2004) ASTM D (2015) ASTM D ASTM D4964 (300mm/min) (SI units) ASTM D (2016) ASTM D4966 ASTM D4970 ASTM D (2013) ASTM D (2015) ASTM D (2010) ASTM D (2010) ASTM D ASTM D ASTM D (2001) ASTM D ASTM D ASTM D a (2010) ASTM D ASTM D (2009) ASTM D ASTM D (2015) ASTM D (2011) ASTM D (2013) ASTM D (2007) ASTM D ASTM D (2008) ASTM D ASTM D ASTM D ASTM D (Section 32) ASTM F ASTM F (Tension Test for Seams) ASTM F (Tension Test) ATSM D3786 ProMace AS 2001 AS AS AS AS AS AS AS AS AS/NZS s ASTM D1335 (IP units) ASTM D1424 ASTM D (2016) ASTM D (1975) ASTM D1683 (SD MOD) ASTM D a ASTM D (2015) ASTM D ASTM D1922 ASTM D ASTM D ASTM D (2010) ASTM D (2010) ASTM D (2010) ASTM D (2010) ASTM D (2010) ASTM D (2015) ASTM D2261 (IP units) (Manual-stop) ASTM D2261 (SI units) (Manual-stop) ASTM D ASTM D ASTM D2594 i 10.3 ASTM D2594 ii 10.4 BIS IS BIS IS BIS IS BS 1006: UK-TB BS 1006: UK-TJ BS :1989 BS 2543 BS 2543 BS 2543:1995 BS 2576:1986 BS 3084:2006 BS 3144: Ball Burst Test BS 3320:1988 (1995) BS 3424 Part 33 Method 36 BS 3424: Part 14 BS 3424:Part 4:1982 Method 6 BS 3424:Part 5:1982 Method 7A BS 3424:Part 5:1982 Method 7B BS 3424:Part 5:1982 Method 7C BS 3424:Part 6:1982 BS 3424:Part 7:1982 BS BS 4162:1983 BS 4303:1968 BS 4952 (LLL 50%) BS 4952:1992 BS :1991 BS :1981 BS :1980 BS 5438 BS 5690:1979 BS 5690:1988 BS 5690:1991
3 Standard Instrument Standard Instrument BS 5722 BS 5811 BS BS 6249 BS 7837 BS 7907 BS 7907:2007 (Annex B) BS 8428 BS 8479 BS 8479:2008 BS 8510:2009 (Section 10) CAN/CGSB 4.2 NO.12.3 CAN/CGSB-4.2 No CEN/TR Annex B CPSD-SL MTHD DBA RMQT-OI/ DBA RMQT-OI/ Rev 01 DECATHLON DS-044 DECATHLON DS TEST 1 DECATHLON DS TEST 2 DECATHLON DS TEST 3 DECATHLON DS TEST 4 DECATHLON DS-275 (02 CYCLES) DECATHLON DS-275 (05 CYCLES) DECATHLON DS-275 (10 CYCLES) DECATHLON DS-275 (15N 100mm/min) DECATHLON DS-275 (15N 200mm/min) DECATHLON DS-275 (15N) DECATHLON DS-275 (35N 100mm/min) DECATHLON DS-275 (35N 500mm/min) DECATHLON DS-275 (35N) DIN 53289:1974 DIN DIN 53356:1982 DIN 53357:1982 DIN 53504:1975 DIN DIN (Sheet Specimens) DIN 53530:1981 DIN Part 13:1983 DIN Part 14:1992 DIN 53858:1979 DIN Part 4:1977 DIN Part 5 DIN 53868:1992 DIN 53934:1986 DIN 54310:1980 DS-026 DS-275/B DS-275/C DS-275/D DS-288-C EN 1624 EN 1625 EN :1997 EN EN 26330: 1993 EN :1992 EN 343 EN 388 EN 388: Puncture Resistance EN 388: Tear Resistance EN 530 EN 71-1 (Compression Test: 110N) EN 71-1 (Seam Test) EN 71-1 (Tension Test) EN 71-2 EN EN EN EN ISO 11644:2009 (IUF 470) EN ISO EN ISO EN ISO EN ISO :2013 EN ISO :2014 EN ISO 13935/6-2 EN ISO 13935/6-2 (kgf) (combined method) EN ISO 13935/6-2 (N) (combined method) EN ISO :1999 EN ISO :2014 EN ISO :1999 EN ISO :2014 EN ISO :2004 EN ISO :2004 EN ISO :2007 (Apparel) EN ISO :2007 (Upholstery) EN ISO EN ISO :2000 EN ISO :2000 EN ISO :2000 EN ISO 1421:1998 EN ISO EN ISO 17695:2005 EN ISO 17708:2003 EN ISO 2062:2009 EN ISO 23910:2007 (IUP 44) EN ISO 2411:2000 EN ISO 3376:2011 (IUP 6) EN ISO :2011 (IUP 40-1) EN ISO :2002 (IUP 8) EN ISO EN ISO :2015 EN ISO : Method A EN ISO : Method B EN ISO 6330: 2000 EN ISO 6330:2012 EN ISO 6330:2012 EN ISO 6940 EN ISO 6941 EN ISO :1997 Spray Rating Tester DUPONT TTM 076 (2000) EN 1101 EN 1102 EN 1103 EN :1999 EN EN :1998 EN 12773:1999 EN 13514:2001 EN EN 13522:2001 EN 13571:2001 EN 13572:2001 Method A EN 13572:2001 Method B EN EN EN EN Method A EN Method B EN 14410:2003 EN EN EN 1464:2010 EN EN Method A EN Method A EN Method A EN EN 15598:2008 EN EN ERT ERT FTMS 191A FTMS 191A FTMS 191A FTMS 191A FTMS 191A FTMS 191A FTMS 191A FTMS 191A FTMS 191A FZ/T FZ/T FZ/T and 8.4 FZ/T FZ/T FZ/T FZ/T FZ/T FZ/T (5 High and 5 Low Peaks) FZ/T (Full Integration) FZ/T FZ/T FZ/T FZ/T (30%) FZ/T FZ/T FZ/T GAP INC S1023 3
4 Standard Instrument Standard Instrument GAP INC S1023 (05/12/09) GAP INC S1027 GAP INC S1027 GAP INC S1028 GAP INC S1028 GAP INC S1033 (November 2013) GAP INC S1034 GAP INC S1064 GAP INC S1064 (June 2015) GB (Compression Test) GB (Tension Test for Seams) GB (Tension Test) GB/T GB/T GB/T GB/T GB/T GB/T GB/T GB/T GB/T GB/T & Annex B-T GB/T & Annex C-T GB/T GB/T GB/T GB/T GB/T GB/T GB/T 3921 GB/T GB/T GB/T 455 GB/T GB/T 5711 GB/T 5718 GB/T 6152 GPF D5035 (305mm/min) H&M TM DS:12 H&M TM DS:12 H&M TM DS:13 H&M TM DS:13 ISO 11857:1999 ISO ISO ISO ISO ISO ISO ISO 17696:2004 ISO 17697:2003 Method A ISO 17697:2003 Method B ISO ISO 17706:2003 ISO 1805:1973 ISO 1974 ISO 2023 Annex C ISO 2023:1994 Annex C ISO 20866:2001 ISO 20872:2001 ISO 20874:2001 ISO ISO 2758 (paper) ISO Method A ISO Method B ISO 29864:2007 ISO 3303:1990 Method A ISO 3379: 1976 ISO 4578:1997 ISO 4637:1979 (BS 903-A27:1986) ISO ISO 4919:2012 ISO 4920 ISO 5081:1977 ISO 5082:1982 ISO ISO 6330: 1984 ISO ISO 6939:1988 ISO :2012 ISO :2012 (Compression Test) ISO :2012 (Tension Test) ISO :1989 ISO :2008 IUF 402 IUP 48-2 IUP 53-1 Spray Rating Tester ICI Test Method 444 IWTO 40 IEC IKEA IOS-TM-0002 IMO Resolution A 471(XII) IMO Resolution A563(14) IMO Resolution MSC.61(67) INEN 1061:1983 INEN 561:1981 IS (Part 2): 2002 (2007) IS Annex D IS (Part 4): 2011 IS 1969: 1985 IS 6489 (Part 2): 2011 IS 6489 (Part 3): 2011 IS 6489 (Part 4): 2011 IS 7016 (Part 2): 1981 (2003) IS 7016 (Part 3) - Method A1 IS 7016 (Part 3) - Method A2 IS 7016 (Part 5) IS 7071 (Part 1): 1986 IS 7703 (Part 2): 1990 (2002) ISO 105-B02 ISO 105-C06 ISO 105-C08 ISO 105-C09 ISO 105-C10 ISO 105-C12 ISO 105-D01 ISO 105-E01 ISO 105-E02 ISO 105-E03 ISO 105-E04 ISO 105-E12 ISO 105-X05 ISO 105-X11 ISO 105-X12 ISO Jantzen Test Method 3 Jantzen Test Method 3 JIS K JIS L 0844 JIS L 0850 JIS L 0860 JIS L 0879 JIS L 1058 JIS L1076 method D JIS L1076 method D JIS L1085:1998 (2013) JIS L1085:1998 (2013) JIS L1085:1998 (2013) (6.7.3) JIS L1086:2007 (superseded) JIS L1093 Grab Method A-1 JIS L1093 Grab Method A-2 JIS L1093 Grab Method A-3 JIS L1093:2011 Grab Method A-1 JIS L1093:2011 Grab Method A-2 JIS L1093:2011 Grab Method A-3 JIS L1096:2010 (8.14.1) JIS L1096:2010 (8.14.2) JIS L1096:2010 (8.15.1) JIS L1096:2010 (8.15.2) JIS L1096:2010 (8.16.1) JIS L1096:2010 (8.16.1) JIS L1096:2010 (8.17.1) JIS L1096:2010 (8.17.2) JIS L1096:2010 (8.23.1) Method A JIS L1096:2010 (8.23.1) Method B JIS L1096:2010 (8.23.1) Method C JIS L1096:2010 (8.23.1) Method D JIS L1096:2010 (8.23.1) Method D JIS L1096:2010 (8.23.2) Method B JIS L1096:2010 (8.23.3) JTA ST 2012 Compression Test JTA ST 2012 Tension Test LS&CO METHOD 11 (IP units) LS&CO METHOD 11 (IP units) ProMace 4
5 Standard Instrument Standard Instrument LTD 03 (01/30/2015) LTD 06 LTD 06 (05/27/10) LTD 07 LTD 07 (05/27/10) LTD 11 LTD 16 LTD 16 (05/27/10) LTD 18 (05/27/10) LTD 19 LTD 24 (05/27/10) LTD 26 (05/27/10) LTD 27 (05/27/10) LTD 81 (based on 16 CFR ) LTD 84 Part 1 LTD 84 Part 1 (04/12/2016) LTD 84 Part 2 (04/12/2016) M&S C04 M&S C05 M&S C08 M&S C10A M&S C13 M&S C15 M&S C37 M&S C58 M&S C9 M&S C9A M&S P1 M&S P10 M&S P11 M&S P114 M&S P115 M&S P115A M&S P115B M&S P115C M&S P115H M&S P11A M&S P11B M&S P11C M&S P12 M&S P12 M&S P122 M&S P124 M&S P12A M&S P12A M&S P12A M&S P12B M&S P12B M&S P12C M&S P12C M&S P13 M&S P134 M&S P134A M&S P13A M&S P14 M&S P141 M&S P14A M&S P14B M&S P14C M&S P15 PART 1 M&S P15A M&S P15B M&S P17 M&S P18A M&S P18B M&S P18C M&S P19 series M&S P1A M&S P1B M&S P1C M&S P21A M&S P23 M&S P27 M&S P29 M&S P35 M&S P3A M&S P4 M&S P42 M&S P43 M&S P4A M&S P4B M&S P4C M&S P5 M&S P5A M&S P6 M&S P69 M&S P7 M&S P70 M&S P91 M&S P98 Spray Rating Tester M&S P99A M&S PG01 Mercedes Benz DBL 7384 NEXT TM 2 NEXT TM 2A NEXT TM 3 NEXT TM 3A NEXT TM 5 NEXT TM06 NEXT TM10 NEXT TM10 NEXT TM11 NEXT TM11 NEXT TM12 NEXT TM12 NEXT TM16 NEXT TM16a NEXT TM17 NEXT TM18 series NEXT TM21 NEXT TM21a NEXT TM22 NEXT TM24 NEXT TM25 NEXT TM26 NEXT TM27 NEXT TM30 NEXT TM30A NEXT TM34 NEXT TM34 NEXT TM36 NEXT TM36a NEXT TM36A NEXT TM37 NEXT TM42 NEXT TM45 NEXT TM46 NEXT TM7 NEXT TM7 NEXT TM7a NEXT TM7A NEXT TM7b NEXT TM7B NEXT TM9 NEXT TM9 NEXT TM gf NEXT TM gf NEXT TM gf NEXT TM gf NF G NF G NF G :1984 NIKE TEST EQ01 NIKE TEST G76 for Binding Tape NIKE TEST G76 for Cables NIKE TEST G76 for Elastic Gore NIKE TEST G76 for Fabrics NIKE TEST G76 for Genuine Leathers NIKE TEST G76 for Insole Boards NIKE TEST G76 for Knitted Mesh NIKE TEST G76 for Shoe Laces NIKE TEST G76 for Synthetic Leathers NIKE TEST G76 for Threads NIKE TEST G76 for Webbings NIKE TEST G76 for Yarns NIKE TEST G77 - Textile NIKE TEST G77 Textile PAPTAC D9 PB-001 PB-002 PB-003 PB-004 PB-021 PB-027 PB-028 pren ISO 17698:2013 PSTC-131 PSTC-131 Procedure A PSTC-131 Procedure B Puma PT85 PV
6 6 Standard QB/T Ralph Lauren Fabric Stretch Renault D /--E SABS 1009 SABS SM 637:2000 SANS (IUF 470) SANS 11644:2009 (IUF 470) SANS 1540 SANS 5636 SANS 5636:2015 SANS 6116 SANS 6194 SANS 6194:2007 (Edition 2.1) SATRA PM117 SATRA TM225 (PM225) SATRA TM29 SATRA TM29 SATRA TM30: 1995 SC/T SFS 4328 SIS SLF 402 SN SN TAPPI T414 TEMA ELASTICITY FT-07 Method 2 TESCO TM/137/01 TM 8 Triumph TP-22 TWC 112 TWC-TM04 version 2009 TWC-TM117 version 2009 TWC-TM179 TWC-TM202 version 2009 TWC-TM248 TWC-TM264 version 2009 UNE 40902:2008 UNI 10606:2009 UNI :1992 UNI :1992 VDA VDA VDA Volvo 1024 Volvo 7122 Woolmark TM 152 Woolmark TM 177 Woolmark TM 193 Woolmark TM 240 Woolmark TM 241 Woolmark TM 250 Woolmark TM 294 Woolmark TM 300 Woolmark TM196 Woolmark TM254 Woolmark TM29 Woolmark TM31 WSP WSP (09) WSP (09) A Instrument ProMace
7 7 TEST MATERIALS (CONSUMABLES) Standard AATCC METHOD 116 AATCC METHOD 124 AATCC METHOD 130 AATCC METHOD 132 AATCC METHOD 135 AATCC METHOD 143 AATCC METHOD 150 AATCC METHOD 16 AATCC METHOD 172 AATCC METHOD 179 AATCC METHOD 188 AATCC METHOD 190 AATCC METHOD 61 AATCC METHOD 61 AATCC METHOD 8 AATCC METHOD 88B AATCC METHOD 88C AATCC METHOD 96 ASTM D 3786 ASTM D 3786 ASTM D 4966 TABLE 1 ASTM D 4966 TABLE 1 BHS TM46 BS 5651:1989 BS 5651;1978/1989 BS 8479:2008 BS EN 12127:1998 EN EN EN 26330:1994 EN 26330:1994 (ISO 6330:1984) EN 26330:1994 (ISO 6330:1984) EN 388:2016 EN ISO 105 C08/C09 EN ISO 10525:1995 EN ISO 10528:1995 EN ISO EN ISO 150 C06:2010 EN ISO 15028:1995 EN ISO 26330:1994 (ISO 6330:1984) EN ISO 633:2000 EN ISO 6330:2000 EN ISO 6330:2000 EN ISO 6330:2001 AMD.1:2008 (TYPE A2) EN ISO 6330:2012 (TYPE A1) EN ISO 6330:2012 (TYPE III) IEC ISO 105-A02 ISO 105-A03 ISO 105-B08 ISO 105-F02 ISO 105-F09 ISO 105-F10 ISO 105-F10 ISO 105-F10 ISO 105-X12 ISO ISO TABLE 1 ISO TABLE 1 ISO TABLE 2 ISO ISO ISO 3801:1997 ISO 6330:1984 ISO 6330:2000 AMD.1:2008 JIS L METHOD E JIS L METHOD E JIS L METHOD E M&S P1A/P1C Product Crocking Squares AATCC Crocking Squares AATCC Crocking Squares AATCC Crocking Squares AATCC Abrasive Cloth 5M Abrasive Cloth 50m Felt Covered Tubes ECE B Formulation Phosphate Refe IEC B Formulation Phosphate Refe Felt Covered Tubes Cutting Boards Abrasive Cloth 5M Abrasive Cloth 50m TAED ECE B Formulation Phosphate Refe Klingspor IEC B Formulation Phosphate Refe ECE B Formulation Phosphate Refe ECE B Formulation Phosphate Refe IEC B Formulation Phosphate Refe IEC A Formulation Non-Phosphate IEC A* Formulation Non-Phosphate TAED TAED Polyester Makeweights IEC A* Formulation Non-Phosphate Grey Scale Change in Colour Grey Scale Staining Pre-Mounted Blue Wools Cotton Limbric 1m Crocking Cloths - 5 x 5cm Multifibre Adjacent 10mt Multifibre 50M Multifibre Gimped BHT-Free Polythene Film Test Papers 100, pack 150 Control Fabrics Test Papers 100 (3 x pk50) Grey Scale Staining EMPA Photos Abrasive Cloth 5M Abrasive Cloth 50m Woven Felt Pads (140mm) Cutting Boards TAED Polyester Makeweights Abrasive Cloth 5M Woven Felt Pads (140mm) Abrasive Cloth 50m Test Papers 100, pack 150 Control Fabrics Test Papers 100 (3 x pk50) BHT-Free Polythene Film Grey Scale Staining Polyester Makeweights Stock Code / / / / / / / / / / /
8 TEST MATERIALS (CONSUMABLES) Standard Product Stock Code NEXT TM 22 NEXT TM 22 SN WOOLMARK TM29 WOOLMARK TM29 WSP 20.5 WSP 30.2 WSP 30.2 EMPA Photos Woven Felt Pads (140mm) STANDARD BODIES - REFERENCE LIST Prefix Standard Body Standard Body - Full Name AATCC adidas AG / Arcadia AS/NZS ASTM BIS IS BS CAN/CGSB CFR DBA DIN DS Dupont EN / EN ISO ERT FTMS FZ/T /GB / GB/T / SC/T / QB/T GAP INC H&M ICI IEC IKEA IMO INEN ISO IUF IUP IWTO Jantzen JIS JTA LS&CO LTD M&S Mercedes Benz NEXT NF G NIKE PAPTAC PB PSTC PV Ralph Lauren Renault SABS SANS SATRA SFS SIS SLF SN TAPPI TEMA TESCO Triumph UNE UNI VDA Volvo Woolmark TM / TWC-TM WSP AATCC adidas Group Arcadia AS ASTM BIS bsi CAN CFR DBA DIN Decathlon Dupont CEN EDANA FTMS SAC GAP INC H&M ICI IEC IKEA IMO INEN ISO IULTCS ALCA IWTO Jantzen JIS JTA LS&CO LTD M&S Mercedes Benz NEXT AFNOR NIKE PAPTAC Pacific Brands PSTC PV Ralph Lauren Renault Group SABS SANS SATRA SFS SIS SLTC SNV TAPPI TEMA TESCO Triumph AENOR UNI VDA Volvo Group Woolmark WSP American Association of Textile Chemists and Colorists adidas Group Arcadia Group Limited Standards Australia American Society for Testing and Materials Bureau of Indian Standards The British Standards Institution National Standard of Canada Code of Federal Regulations DB Apparel Deutsches Institut für Normung e.v. Decathlon Dupont Comité Européen de Normalisation European Disposables and Nonwovens Association Federal Test Method Standard Standardization Administration of the People's Republic of China GAP INC H&M Group Imperial Chemical Industries International Electrotechnical Commission IKEA GROUP International Maritime Organisation Servicio Ecuatoriano de Normalización International Organization for Standardization International Union of Leather Technologists and Chemists Society American Leather Chemists Association International Wool Textile Organisation Jantzen Japanese Industrial Standards Japan Toy Association Levi Strauss Limited Brands Marks & Spencer plc Mercedes Benz NEXT Plc Association Française de Normalisation NIKE Pulp and Paper Technical Association of Canada Pacific Brands Pressure Sensitive Tape Council Volkswagen Group Ralph Lauren Corporation Renault Group South African Bureau of Standards South African Bureau of Standards SATRA Technology Centre Finnish Standards Association Swedish Standards Institute Society of Leather Technologists and Chemists Swiss Association for Standardization Technical Association of the Pulp and Paper Industry TEMA TESCO Triumph International La Asociación Española de Normalización y Certificación Ente Nazionale Italiano di Unificazione Verband der Automobilindustrie e. V. Volvo Group Woolmark World Strategic Partners (INDA / EDANA) 6th June
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 7 I. TEXTILE MATERIALS 1. Yarn) Linear Density SO-IN-CTS-C02-QU-001 (Version 3.2) ASTM D1907/D1907 M-12 ASTM D 1059: 2001 ISO 7211-5: 1984 BS ISO 7211-5: 1984 ISO 2060:
Name of Laboratory : SGS CAMBODIA LABORATORY Accreditation Number : Testing : 1076 A-C, Street 371, Sangkat Stung Meanchey, Khan Meanchey,
Name of Laboratory Contact Person : Mr. Sopheak Chea Phone : + 855 23 967 888 Fax : - Email : Sopheak.Chea@sgs.com 1 Textiles - Colour fastness to light : ISO 105-B02 : 2014 Xenon-Arc BS EN ISO 105-B02
MAIN LAB CONDITIONED ROOM FLAMMABLES FTT SNAPRITE MMT SWEATING GUARDED HOT PLATE ROTAWASH AIRPERM ROTAPILL PILLING AND SNAGGING TESTER
1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST 1 1 1 1 1 1 0 M 1 -HEAD MARTINDALE UNIVERSAL TENSILE TESTER, K ST The innovative measures skin touch properties of textiles objectively and quantitatively.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
UL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
WATER TESTERS. Water Resistance and Repellency Testers
WATER TESTERS Water Resistance and Repellency Testers Testing for Water Resistance and Repellency Different fabric applications require different test methods. Apparel, Awnings, Boat and Vehicle Covers,
UL S EXPEDITED COMPLIANCE SERVICES APPAREL
APPAREL APPAREL (1 COLOR / 1SIZE) Tier 1 - Regulatory - All $150 $90 Flammability General Wearing Apparel 16 CFR 1610 Flammability - Vinyl 16 CFR 1611 Care Labeling 16 CFR 423, ASTM D 3136, ASTM D 5489
Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan
All Textile MaterialsProduct F-0602 Issue : 100815 Testing Laboratory. Accreditation Scope of Consumer & Retail Services Laboratory, Karachi, Pakistan Permanent laboratory premises H- 33, Korangi Industrial
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com
Accreditation No: LAB 007. SGS Consumer & Retail Services - Laboratory H-3/3, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan.
F-0602 Issue : 100815 Accreditation No: Awarded to SGS Consumer & Retail Services - Laboratory H-33, Sector 5, Korangi Industrial Area, Karachi 74900, Pakistan. The scope of accreditation is in accordance
11 BS 4468 ; Withdrawn and replaced by BS En : 1994, ISO 1974 : 1990( 2012). Determination of tearing resistance ( Elmendorf method )
S No Standrads Name 1 ASTM SEC 7 - Textiles 2 ASTM SEC 8 - Plastics 3 ASTM SEC 9 - Rubber 4 ASTM SEC 10 - Electrical Insulation and Electronics 5 ASTM SEC 4 VOL 04.04:2013 (construction: volume 04.04:Roofing
President For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
ProMace/ProView MACE SNAG TESTER & ASSESSMENT CABINET
PRODUCT UPDATE Extraordinary Testing Solutions ProMace/ProView MACE SNAG TESTER & ASSESSMENT CABINET We believe our ProMace to be the safest, most efficient, accurate and repeatable Mace Snag Tester available
Ahmedabad Textile Industry s Research Association (ATIRA), P.O. Ambawadi Vistar, Ahmedabad, Gujarat
Last Amended on - Page 1 of 13 I. TEXTILE MATERIALS 1. Fibre Micronaire Length Length uniformity Strength Elongation% Short fibre % Colour Whiteness (Rd) Colour Yellowness (+b) Neps/g Neps size SCN/g SCN
This document is a preview generated by EVS
CEN WORKSHOP CWA 15375 August 2005 AGREEMENT ICS 47.020.30 English version Separators for marine residual fuel - Performance testing using specific test oil This CEN Workshop Agreement has been drafted
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : EN ISO 105 B06 XNCQAY PDF EBOOK EPUB MOBI Page 1 Page 2 en iso 105 b06 xncqay en iso 105 b06 pdf en iso 105 b06 xncqay en. Format Language; std 1 88: PDF std 2 88: Paper CHF 88; Buy
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT
Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2)
The IULTCS official methods of analysis for leather
The IULTCS official methods of analysis for leather The IULTCS, through the IULTCS Testing Commissions (IUC, IUF and IUP), provides help and protection for the leather tanning industry worldwide by developing
This tester is designed for conducting tensile, compression, bending, shearing, bonding strength,
FOOTWEAR TESTING GT-K01 Universal Testing Machine (Dual Column) This tester is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes,rubber,
Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra
Last Amended on - Page 1 of 7 I. PLASTICS, RUBBER AND LEATHER 1. Container for Packing of Natural Mineral Water and Packaged Drinking Water (Cups, glasses, bottles & Jars) Design, Shape and dimension IS
INTERNATIONAL PERMEATION MEASUREMENT STANDARDS
INTERNATIONAL PERMEATION MEASUREMENT STANDARDS Area Sales Manager - Europe Permeation Testing Systems MOCON GmbH Standardisation organisations ASTM: ASTM International, formerly known as American Society
Specification Cloth, Fire Resistant, Softshell
Royal Canadian Mounted Police Gendarmerie royale du Canada Doc. no: G.S. 1045-373 Date: 2017-05-20 Specification Cloth, Fire Resistant, Softshell This document has 12 pages. This document was created in
--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T3923.
Translated English of Chinese Standard: GB/T3923.2-2013 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 59.080.30 W 04 Replacing GB/T 3923.2-1998
STS Directory Accreditation number: STS 0228
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TESTEX AG Schweizer Textilprüfinstitut Gotthardstrasse 61 CH-8027 Zürich Head: Responsible for MS: Dr. Jean-Pierre Haug
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017
NZWTA TEXTILE TESTING Price List Valid from 01 July 2017 Carpet Tests Test Method Minimum Sample Size ACCS Full Test Package (6 tests) 1 x 1.5 m, 6 tiles $734.00 Castor Chair Test ISO TR 4918, BS DIN EN
Cyclic Corrosion Test CORR Series
Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY
Services Directory updated: January 2016
Kulmbacher Straße 76 95213 Münchberg Tel. 09281/409-8720 Fax 09281/409-8799 E-mail: pruefamt@hof-university.de Director: Prof. Oliver Lottes Services Directory updated: January 2016 A) Mechanical and Technological
Discipline Chemical Testing Issue Date Certificate Number T-2217 Valid Until Last Amended on
Last Amended on 19.05.2014 Page 1 of 10 I. TEXTILES & RELATED PRODUCTS 1. Garment / Fabric C/F To Laundering Home & Commercial : Accelerated, Modified 2A Cold (27 0 C), 2A Warm (49 0 C) AATCC 61: 2013
Grade A. Evo EV-19 EV-5 EV-4 EV-2 EV-18 EV-14 EV-10 EV-22 EV-20 EV-21 EV-1 EV-23 EV-24 EV-25. Discover more at inscapesolutions.
Grade A Evo EV-2 EV-4 EV-5 EV-9 EV-10 EV-11 EV-14 EV-18 EV-1 EV-19 EV-20 EV-21 EV-22 EV-23 EV-24 EV-25 Evo Application Fan Specifications Contents Weight Per Unit 100% polyester 300 g/m² Performance Colorfastness
GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T3917.3-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 GB/T 3917.3-2009 Replacing
Laboratory Bureau Veritas Consumer Products Services Lanka (Pvt.) Ltd., No. 570, Galle Road, Katubedda, Moratuwa, Sri Lanka
Last Amended on - Page 1 of 14 I. TEXTILE & TEXTILE AUXILIARIES 1. Textiles- Fabric/Garment Colorfastness to Crocking AATCC 8: 2013 BS EN ISO 105-X12: 2002 AATCC 116: 2013 Colorfastness to Perspiration
Cyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
Textiles Bursting properties of fabrics
BRITISH STANDARD BS EN ISO 13938-1:1999 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension The European Standard EN ISO 13938-1:1999
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate
Cutler-Hammer. January 2001
Vol. 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed to provide circuit protection for low voltage distribution systems.
Cutler-Hammer. Molded Case Circuit Breakers Amperes. Product Selection January 2001 Vol. 1, Ref. No ) J-Frame
Vol. 1, Ref. No. 10499) Product Selection Table 12-56. Types 12-33 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed
9GV612G01 6x6x28 mm 12 V GV type Expected Life: 40,000 h (L10:Survival rate: 90% at 60 C, Tach output G speed : + red - black Sensor yellow Storage Temperature: -20 C to +70 C (Non-condensing) 9GV612G01
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services
A Case Study: Review of Flammability Product Testing, the Similarities and Differences Ellen Roaldi Bureau Veritas Consumer Products Services September 22, 2016 Agenda Methods Analysis Applicability Requirements
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT
[INCH-POUND] May 14, 1999 COMMERCIAL ITEM DESCRIPTION SEAT COVER CLOTH, POLYESTER OR NYLON, WATER-RESISTANT The General Services Administration has authorized the use of this commercial item description
Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General
SGS India Private Limited, Consumer Testing Services-Laboratory, No. 134, 2 nd Floor, Sivashakthi Nagar, College Road, Tirupur, Tamil Nadu
Last Amended on 03.12.2015 Page 1 of 13 I. TEXTILE & TEXTILE AUXILIARIES 1. Determination of ph of Aqueous Extract Determination of Formaldehyde Free and Hydrolysed (Water Extraction Method) Released Formaldehyde
AutomAtic Strength tester AUTODYN
Automatic Strength TESTER AUTODYN AUTODYN Automatic Strength Tester Description Automatic Strength Tester, up to 24 positions, for testing the tensile strength of yarns. It can also test yarns, hanks and
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
This document is a preview generated by EVS
CEN WORKSHOP CWA 15897 November 2008 AGREEMENT ICS 13.060.30 English version Submerged Membrane Bioreactor (MBR) Technology This CEN Workshop Agreement has been drafted and approved by a Workshop of representatives
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORIO CENTRAL DE BADER DE MEXICO 1 Bader de Mexico Sigma 601, Parque Industrial Delta Leon, Guanajuato C.P. 37179 MEXICO Juanita Landin Phone: 52 477
CombiTemp Accessories
CombiTemp Accessories Accessories for CombiTemp - the flexible building block system for temperature measurements Housings, standard DIN B and Bourdon-Haenni ø80 mm stainless steel Brackets for wall mounting
OX2/231 i-oxtra OX2/230 i-oxtra VAC-V2 i-gastra 7100
Classic Series Product Name & Description Classic + Big Data Standards To Follow OX2/231 i-oxtra 7600 Oxygen Permeability Tester This tester utilizes the coulometric sensor method to test the oxygen transmission
GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T25978-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 04 GB/T 25978-2010 Road vehicles
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
D-LAB Specifications. Your Partner for textile testing and quality assurance
D-LAB Specifications Your Partner for textile ing and quality assurance D-LAB is your neutral partner for reliable quality management and evaluation in all textile areas. Producers of home textiles, furnishing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK CTI Building No.4, Liuxian 3rd Road Xin'an Street Bao'an District Shenzhen Peoples Republic of China Contact: Rachel Lee Tel: +86 755 3368
Accessories Performance Standards Manual. Version 1 24/12/
Accessories Performance Standards Manual Version 1 24/12/2010-1 - CONTENTS Page/s Introduction 3 QVC Preferred Laboratories 4-7 Restricted Substances 8 List of Restricted Substances 9 Azo Dye Self Certification
Cleanroom Standards and Updates
Cleanroom Standards and Updates Cleanroom Standards / Environmental Guides FED-STD 209E: Established Sept, 1992: Cancelled November 2001 ISO 14644-1: Established May 1999 (replaces Fed-STD 209E, BS 5295)
DILLARD'S INC TEST PROTOCOL FOR DILL USA- (V22) HANDBAG (CHILDREN)
By/Date: Page 1 of 6 SCOPE: This protocol is applicable for testing of handbag for children. SUPPLEENTAY POTOCOL Note: Additional cost, sample size and TAT may be required if testing to 1 or more supplemental
Long Life Coolant Blue
Long Life Coolant Blue Hi-Tec Long Life Coolant Blue is an ethylene glycol based antifreeze/coolant concentrate incorporating an advanced Organic Acid Technology (OATS) formula with virtually non-depleting
Laboratory SGS Bangladesh Limited, Laboratory Services, IIUC Tower, Plot No. 9, Agrabad Commercial Area, SK Mujib Road, Chittagong, Bangladesh
Last Amended on 22.04.2015 Page 1 of 5 I. TEXTILE & TEXTILE AUXILIARIES 1. Dimensional stability to washing Dimensional stability to Dry cleaning Appearance of fabric after repeated home laundering Smoothness
Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang
Footwear Testing Guide & Requirements
Footwear Testing Guide & Requirements MTS Testing Services on Consumer Products Modern Testing Services is a global, strategic partner for fast, accurate, and cost effective quality assurance solutions
Material Testing TEXTILE/LEATHER TESTER. Digital Bursting and Strength Tester Strength Tester. Manual Wrap Reel Motor Wrap Reel Spray Tester
TEXTILE/LEATHER TESTER Bursting and Strength Tester Digital Bursting and Strength Tester Accesories Bursting and Strength Tester Manual Wrap Reel Motor Wrap Reel Spray Tester Motor Twist Tester Yarn Inspector
PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS 10 A TECHNICAL FEATURES
PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS II2 G D Ex e ia or ib IIC FROM 12 TO 37 CONTACTS LOCKING IN CONNECTED OR DISCONNECTED POSITION CORROSION-FREE METAL CASING TECHNICAL FEATURES PXN12C DXN25C
UPDATING OF THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION AND LABELLING OF CHEMICALS (GHS) Physical hazards
UNITED NATIONS Secretariat Distr. GENERAL ST ST/SG/AC.10/C.3/2007/11 12 April 2007 Original: ENGLISH COMMITTEE OF EXPERTS ON THE TRANSPORT OF DANGEROUS GOODS AND ON THE GLOBALLY HARMONIZED SYSTEM OF CLASSIFICATION
SVENSK STANDARD SS-EN ISO 4684:2005. Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005)
SVENSK STANDARD SS-EN ISO 4684:2005 Fastställd 2005-11-11 Utgåva 1 Läder Kemiska provningar Bestämning av flyktiga ämnen (ISO 4684:2005) Leather Chemical tests Determination of volatile matter (ISO 4684:2005)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
Cutler-Hammer. January 2001
Cutler-Hammer Vol. -2 Product Line Overview Vol. 1, Ref. No. [0468] Product Line Description Cutler-Hammer Molded Case s are designed to provide circuit protection for low voltage distribution systems.
EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS
Intelligent Drivesystems, Worldwide Services EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS EN INTERNATIONAL REQUIREMENTS EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS Electric drives in industrial
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33757-5 Edition 4.1 IEC 60269-2:2016 Edition 5.1 SOUTH AFRICAN NATIONAL STANDARD Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorised persons (fuses mainly
German Hydrogen Association
German Hydrogen Association EVA, Vienna, 31. March 2004 Safety of Hydrogen: Standards and Regulations, Ulrich Schmidtchen German Hydrogen Association (DWV), Berlin Missing link? A lot can be said about
Reflective Products Color Selector
Reflective Products Color Selector Avery Dennison Traffic & Work Zone Products Avery Dennison s technology has been making highway safety solutions brighter with prismatic signs since 1924. Avery Dennison
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
Vertical Tensile Machine
Vertical Tensile Machine Code: 11.202.100 For the determination of force, tensile resistance, elongation and tensile energy absorption (TEA) in paper or tissue. Standards: ISO 1924-1, ISO 1924-2, ISO 1924-3,
Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame
![Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame](/thumbs/89/98397840.jpg "Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame")
Cutler-Hammer January 200 Vol., Ref. No. [077] s Molded Case s 5-00 Amperes 2- 2-2 Product Line Overview January 200 Vol., Ref. No. [068] 2 Product Line Description Cutler-Hammer Molded Case s are designed
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D PL 11231 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 24.08.2015 to 24.07.2018
Cutler-Hammer. Molded Case Circuit Breakers Amperes F-Frame. January 2001
2-22 0-225 Amperes F-Frame Cutler-Hammer January 200 Vol.,Ref. 2-2 Product Line Overview January 200 Vol., Ref. No. [0468] 2 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed
EFIT. By Alegre Design
By Alegre Design - Features... 0 Finishes... 05 Serie 0... 06 Serie 0... 0 Serie 0 Draughtsman Chair... 0 Ergonomics... 09 Ecodesign... 0 - Price List Serie 0... Serie 0 Draughtsman Chair... Serie 0...
Conductive Fabric Over Foam Gaskets
Product Overview This product is manufactured from a synthetic polyester or nylon yarn which is plated to give electrical conductivity over the surface of the fibre and then woven in a traditional way
Eurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
QB/T Translated English of Chinese Standard: QB/T
Translated English of Chinese Standard: QB/T2858-2007 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL LIGHT INDUSTRY STANDARD QB OF THE PEOPLE S REPUBLIC OF CHINA ICS 97 180 Y 50 Reference No.
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13595-1:2002 Kaitserõivad professionaalsetele mootorratturitele. Jakid, püksid ja ühevõi kaheosalised ülikonnad. Osa 1: Üldnõuded Protective clothing for professional motorcycle riders
Description Series 70/71 Solid State Reduced Voltage Starters
Nordic Controls Description Series 70/71 Solid State Reduced Voltage Starters *«Introduction Smooth Start and Stop AC induction motors and their associated high torque starting have been a routine cause
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 nd Floor uilding No 4 Shanghai Comalong Industrial Park 889 Yi Shan Road Shanghai 200233 China Contact: Ms Cynthia Liu Tel: +86 21 6091
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MONTOI, S.A. DE C.V. Libramiento Noreste Km.27 Escobedo, CP 66052 Nuevo Leon, Mexico Rodolfo Caballero Phone: 52-818154030 Email: Rodolfo.Caballero@Mattel.com
@-MOTION R15K steel 33 chrome with an Epron Syncron mechanism and seat sliding system
www.nowystyl.com/products/office-chairs/at-motion/at-motion-r15k-steel-33-chrome-with-an-epron-syncron-mechanism-and-seat-sliding-system Main Site / Products / Office chairs / @-MOTION @-MOTION R15K steel
BS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39
COLOR OPTIONS Please Call For Availability SPECIALTY WHITE BLACK BROWN GREY CLEAR BS-02 BS-02-SD FEEL THE DIFFERENCE Of Our Soft Durometer Line *SD = Optional Soft Durometer Domestic Phone: 856-345-7650
Engine Oils for Passenger Cars. High-Tech Protection for Engines
Engine Oils for Passenger Cars High-Tech Protection for Engines 2 The right high-tech engine oil for every engine! engine oils are the result of the latest research and development by the world s largest
EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS
Intelligent Drivesystems, Worldwide Services EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS EN INTERNATIONAL REQUIREMENTS EFFICIENCY REGULATIONS FOR MOTORS AND MOTOR SYSTEMS Electric drives in industrial
GARMENT MECHANICAL SAFETY TESTING EQUIPMENT
GARMENT MECHANICAL SAFETY TESTING EQUIPMENT Safety is Our Business SDL Atlas knows that you have a commitment to ensuring the integrity and safety of your products. Stringent government safety regulations
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares