CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date

Size: px

Start display at page:

Download "CiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date"

Evelyn Ray
5 years ago
Views:

1 Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS (Part 2): 1984, (RA 2011) Upto 25 kn, Wrapping Test (Aluminium) IS (Part3 ): 1984 (RA 2011) Resistance Tests (Conductor) IS (Part 5): 1984 (RA 2011) 1 mω to11 Ω Upto 600 Ω km Test on Insulation & Sheath: Overall Diameter IS 694: 1990, IS 1554 (Part 1& 2):1988 (RA 2010) IS 7098 (Part 1):1988 (RA 2010) IS 9968 (Part 1):1988 (RA 2010) IS 9968 (Part 2):2002 (RA 2012) IS 14255: 1995 (RA 2010) Range: 0 to 300 mm Thickness of insulation & sheath IS 694: 1990 IS 1554 (Part 1& 2):1988 (RA 2010) IS 2465:1984 (RA 2011) IS 7098 (Part 1):1988 (RA 2010) IS 9857:1990 (RA 2010) IS 9968 (Part 1):1988 (RA 2010) IS 9968 (Part 2):2002 (RA 2012) IS (Part 6):1984 (RA 2011) Range: 0 to 25 mm, Tensile Strength IS 5831: 1984 (RA 2011) IS 6380:1984 (RA 2011) IS (Part 7):1984 (RA 2011) 0 to 2500 N,

2 Last Amended on - Page 2 of 6 PVC Insulated Cables Elongation at break IS (Part 7): 1984 (RA 2011) 0 to 500 % Loss of mass in air oven IS 5831: 1984 (RA 2011) IS (Part 10):1984 (RA 2011) 2 to 25 mg/cm 2 Ageing in Air Oven IS 5831: 1984 (RA 2011) IS 6380:1984 (RA 2011) IS (Part 11):1984 (RA 2011) Shrinkage Tests IS 5831: 1984 (RA 2011) IS (Part 12):1984 (RA 2011) Heat Shock Tests IS 5831: 1984 (RA 2011) IS (Part 14):1984 (RA 2011) Hot Deformation Tests IS 5831: 1984 (RA 2011) IS (Part15):1984 (RA 2011) Cold Bend IS 5831: 1984 (RA 2011) IS (Part 20):1984 (RA 2011) Cold Impact IS 5831: 1984 (RA 2011) IS (Part 21):1984 (RA 2011) Insulation Resistance IS 5831: 1984 (RA 2011) IS 6380: 1984 (RA 2011) IS (Part 43):1984 (RA 2011) Volume Resistivity IS 5831: 1984 (RA 2011) IS (Part 43):1984 (RA 2011) Variation up to ±80% Upto 20 % Upto 950 g, Upto 100 % Upto 50 M Ω km Upto 10 7 Ω-cm AC High Voltage (Water immersion) Test DC High Voltage (Water immersion)test IS 5831: 1984 (RA 2011) IS (Part 45):1984 (RA 2011) IS 5831: 1984 (RA 2011) IS (Part 45): 1984 (RA 2011) Upto 15 kv Upto 5 kv

3 Last Amended on - Page 3 of 6 CABLES (PVC Insulated Cables) AC High Voltage (at room temp) Test IS 5831: 1984 (RA 2011) IS (Part 45): 1984 (RA 2011) Flammability Test IS 5831: 1984 (RA 2011) IS (Part 53):1984 (RA 2011) Thermal Stability IS 5831: 1984 (RA 2011) IS (Part 60):1984, (RA 2011) Hot Set Test IS 6380: 1984 (RA 2011) IS (Part 30):1984 (RA 2011) Up to 15 kv Upto 100 mm diameter Ambient to 250 C Ambient to 250 C Oxygen Index Test IS (Part 58): 1998 (RA 2011) Upto 40 % Temperature Index IS (Part 64): 2003 (RA 2011) Upto 30 % Flame Retardant Test for Single Core Cable IS (Part 61): 1988 (RA 2011) Smoke Density IS (Part 63): 1993 (RA 2011) Upto 75 % Test of Halogen Acid Gas Evolution IS (Part 59): 1998 (RA 2011) Upto 40 % Test on Elastomeric Insulation & Sheath: Oil Resistance Test IS 6380: 1984 (RA 2011) IS (Part 31): 1984 (RA 2011) Tear Resistance IS 6380: 1984 (RA 2011) IS (Part 17): 1986 (RA 2011) Variation Upto ±80 % Upto 2500 N

4 Last Amended on - Page 4 of 6 CABLES (PVC Insulated Cables) 4.Tests Armouring Material: Dimensions IS 10810(Part 36): 1984 (RA 2011) 0 to 25 mm Tensile strength IS (Part 37): 1984 (RA 2011) 0t o 25 kn, LC: 1N % Elongation IS (Part 37): 1984 (RA 2011) Upto 80% Torsion test IS (Part 38): 1984 (RA 2011) Winding test IS (Part 39): 1984 (RA 2011) Uniformity of Zinc coating IS (Part 40): 1984 (RA 2011) Mass of Zinc coating IS (Part 41): 1984 (RA 2011) 0 to 500 g/m 2 Resistivity & Conductance IS (Part 42): 1984 (RA 2011) 0 to k Ω II. ELECTRICAL MATERIALS- CONDUCTORS 1. Aluminium Dimensions: i)diameter & ii)over all Diameter IS 398 (Part 1):1996 (RA 2012) IS 398 (Part 5):1992 (RA 2012) Mass kg/m IS 398 (Part 1):1996(RA 2012) IS 398 (Part 5):1992 (RA 2012) Resistance Test IS 398 (Part 1):1996(RA 2012) IS 398 (Part 5):1992(RA 2012) Breaking load IS 398 (Part 1):1996 Upto 25 mm Upto 300 mm Range: Upto 30 kg 1 militoohm to 11 Ω Upto 25 kn

5 Last Amended on - Page 5 of 6 Aluminium Lay ratio test IS 398 (Part 1): 1996 (RA 2012) IS 398 (Part 2): 1996 (RA 2012) IS 398 (Part 4): 1994 (RA 2009) Wrapping Test IS 398 (Part 1): 1996 (RA 2012) IS 398 (Part 2): 1996 (RA 2012) Elongation Test IS 398 (Part 2): 1996 (RA 2012) IS 398 (Part 4): 1994 (RA 2009) Torsion Test IS 398 (Part 2): 1996 (RA 2012) Upto 600 LC : 1mm Upto 80% Mass of Zinc Coating IS 6745: 1972 Upto 500 g/m 2 Uniformity of Zinc Coating IS 2633: Paper Covered Aluminium Tests on Conductor: Dimensions IS 6162 (Part 1): 1971(RA 2008) Resistance IS 6162 (Part 1): 1971 (RA 2008) IS 6162 (Part 2): 1971(RA 2008) Tensile Strength IS 6162 (Part 1): 1971 (RA 2008) Elongation IS 6162 (Part 1): 1971 (RA 2008) Wrapping Test IS 6162 (Part 1): 1971 (RA 2008) Upto 25 mm LC 0.001mm 0.2 µω to 11 Ω Upto 25 kn 0 to 80 %

6 Last Amended on - Page 6 of 6 Paper Covered Aluminium Freedom from defects IS 6162 (Part 1): 1971 (RA 2008) Tests on Paper: Thickness IS 6162 (Part 1): 1971 (RA 2008) Tensile Strength IS 6162 (Part 1): 1971 (RA 2008) ph Value of water extract IS 6162 (Part 1): 1971 (RA 2008) Upto 25mm Upto 2500 N Range 1 to 9 Conductivity of water extract IS 6162 (Part 1): 1971 (RA 2008) IS 6162 (Part 2): 1971(RA2008) Upto 200 mω LC 0.01 mω Oil Absorption IS 6162 (Part 1): 1971 (RA 2008) Ageing in Oil IS 6162 (Part 1): 1971 (RA 2008) Application of Paper IS 6162 (Part 1): 1971 (RA 2008) Upto 100 mm LC 0.1 mm Upto 25 kn 0 to 50 % -X-X-X-X-X-X-X-X-X-X-X-X-X-X-

I N T R O D U C T I O N

I N T R O D U C T I O N GEMSCAB are being manufactured by the people who have been associated with the industry for over years and understand the requirements their valued customers. The company took up