Power Consumption. 4/5 Port Solenoid Valve. Series SYJ3000/5000/7000. With Power Saving Circuit

Transcription

1 CT.EUS8 UK ower Consumption / ort Solenoid Valve With ower Saving Circuit Series SYJ000/000/7000 Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M.7 to M. Cover (stainless steel) Flow Characteristics Series SYJ000 SYJ000 SYJ7000 Flow characteristics C [(dm /s bar)] b Cv Q[l/mibn(N)] 7

2 ubber Seal / ort Solenoid Valve Series SYJ000/000/7000 Variations Series SYJ000 Sonic conductance: C [dm /(s. bar)] Type of actuation Voltage For DC Electrical entry For DC Option With light/surge voltage suppressor Manual override ody ported. SYJ000. SYJ7000 Effective area 0.9 mm / / {(/ E/E) } 0.7 / / {(/ E/E) }. / / {(/ E/E) } osition Single Double VDC VDC VDC VDC VDC Grommet L plug connector M plug connector With surge voltage suppressor With light/ surge voltage suppressor ase mounted. 7 SYJ000. SYJ000. SYJ / / {(/ E/E) } 0.8 / / {(/ E/E) } osition Closed center Exhaust center ressure center For C 0 0 VC / 0Hz 0 VC / 0Hz 0 0 VC / 0Hz 0 VC / 0Hz DIN terminal (SYJ000, 7000 only) M8 connector For C Note) With light/surge voltage suppressor Nonlocking push type ushturn locking slotted type ushturn locking lever type.9 / / {(/ E/E) }. 7 Note) ll C voltage models have builtin surge voltage suppressor. Front matter

3 Series SYJ000/000/7000 Manifold Variations, port size Manifold option Valve series, port location M M ø With onetouch fitting pplicable tubing O.D ø ø8 N N7 N9 Individual Individual SU EXH spacer spacer assembly assembly Interface regulator Flat ribbon cable manifold ody ported SYJ000 SYJ000 SYJ7000 Top SYJ000 Side ottom ase mounted SYJ000 SYJ7000 Side ottom Side ottom ( port regulation) ( port regulation) ody ported, port port Individual SU spacer assembly Type port ase mounted, port port port Individual EXH spacer assembly Type, port port port Mixed mounting of port valves and, port valves port Interface regulator, port valve port valve, port port, port port port For detailed specifications about SYJ000, refer to page. For SYJ000, refer to page 8, and for SYJ7000, refer to page. Front matter

4 ubber Seal / ort Solenoid Valve Series SYJ000 Specifications For details about certified products conforming to international standards, visit us at JIS Symbol port port (manifold) position single ()() ()()() position double ()() ()()() ody ported position closed center ()() ase mounted position single () () ()() position double () () ()() position closed center () () Fluid ir position single 0. to 0.7 Operating pressure range (Ma) position double 0. to 0.7 position mbient and fluid temperature ( C) 0. to 0.7 to 0 (No freezing. efer to back page.) Note ) esponse time (ms) (at 0. Ma) Max. operating frequency (Hz) position single, double position position single, double position or less 0 or less (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted /0 Dust proof ( M8 connector conforms to I.) ased on IEC09 Note ) ased on dynamic performance test, JIS (Coil temperature: C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: Solenoid Specifications Electrical entry No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energised and deenergised states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state) Gromet (G), (H), L plug connector (L), M plug connector (M), M8 connector (W) Coil rated voltage (V) llowable voltage fluctuation DC,,,, ±% of rated voltage ower consumption (W) Surge voltage suppressor Indicator light DC Diode (Nonpolarity type: Valistor) LED Standard 0. (With light: 0.) With power saving circuit 0. (With light only) S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to %, VDC: % to % T type: VDC: 8% to %, VDC: % to % ()()() position exhaust center () () () ()() ()() position exhaust center () () ()() position pressure center position pressure center () () () () racket Mounting q Insert the lower hook of the mounting bracket into the groove on the bottom of the valve as shown. w ress the valve and mounting bracket together until the upper hook of the bracket snaps into place in the groove on top of the valve. ()()() () () Made to Order (For details, refer to page 78.)

5 Series SYJ000 Flow Characteristics/Weight Valve model port ase mounted (with subplate) port ody ported Note ) ort ase mounted (For manifold base only) SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ SYJ Type of actuation position position position position position position Cylinder Speed Chart Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center ort size,, (, E, E) M M, Grommet (, ) () 79 () M M M 8 () Note, ) Weight (g) L/M plug connector (7) 8 () 8 (8) M8 connector 7 () 89 () 9 () Effective area (mm ) Note ) Flow characteristics / ( /) / / (/ E/E) C [dm /(s bar)] b Cv Q[l/min(N)]* C [dm /(s bar)] b Cv Q[l/min(N)]* Note ) Dedicated for manifold base. For details, refer to page. Note ) [ ] denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. ody orted Series SYJM verage speed (mm/s) Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. 0.9 ore size Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø0 erpendicular, upward actuation Horizontal actuation [0.] [0.0] 0. [0.] 0. [0.] 0. [0.] 0. [0.080] [8] [] 8 ase Mounted Series SYJM verage speed (mm/s) ore size Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø0 erpendicular, upward actuation Horizontal actuation Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ((Load weight x 9.8) /Theoretical force) x 0% Conditions ody ported Tubing bore x Length SYJM Speed controller Silencer Series CJ Series CM ø x m SF0 NM ase mounted Tubing bore x Length SYJM Speed controller Silencer Series CJ Series CM ø x m S0F0 SF0 NM

6 Series SYJ000 Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center S Z U How to Order Light/surge voltage suppressor Without light/surge voltage suppressor With surge voltage suppresor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) ower saving circuit is only available in the "Z" type. racket : Without bracket F: With bracket port (Type Manifold) ody ported ated voltage DC V S VDC VDC VDC VDC VDC SYJ 0 M M Single Double rackets cannot be retrofitted. Note) The double solenoid mounting bracket is supplied unattached. To order the double solenoid bracket for use with a single solenoid valve, order the single solenoid valve without a bracket and order the bracket (VJ000 ) separately. (Example) SYJMM VJ000 Q ase mounted ( port) SYJ 0 M Q (Manifold use only) ase mounted ( port) SYJ 0 M Q port For manifold type, S,, S port ody option 0: ilot valve individual exhaust for the pilot valve Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. : Common exhaust type for main and pilot valve : Nonlocking push type D: ushturn locking slotted type ort size : Without subplate (With gasket and screws) M: With M port subplate For subplate, manifold type, S,, S port, E port port, E port Electrical entry,,,, VDC Grommet L plug connector M plug connector G: Lead wire L: With lead wire M: With lead wire MN: Without length 00 mm (Length 00 mm) (Length 00 mm) lead wire,,,, VDC M8 connector WO: Without connector cable E: ushturn locking lever type H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector W : With connector cable Note ) LN, MN type: with sockets. For connector cable of M8 connector, refer to back page. Connector M8 type W conforming to IEC 097 standard, is also available. For details, see page 80. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page. Note) When placing an order for body ported solenoid valve as a single unit, mounting bolt for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page.)

7 Series SYJ000 Construction ()() position single position double ()() e t () ()()() qrw () ()()() wq t r () () () position closed center/exhaust center/pressure center position closed center ()() ()()() position exhaust center () () () () u w t q () () r () () () y u ()()() position pressure center () () Component arts No. ()()() Description ody iston plate End cover iston Spool valve assembly Material Zinc diecasted esin esin esin lminum, HN How to Order ilot Valve ssembly Note White White White () (This figure shows a closed center type.) eplacement arts No. 7 () () Description Subplate ilot valve u No. SYJ000Q V (T) How to Order Connector ssebmly for L/M lug Connector Note Zinc diecasted V Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC For type W, DC voltage is only available. G Electrical entry G H L LN LO M MN MO WO W Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor U (Nonpolar type) Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M8 connector ower saving circuit is only available in the "Z" type. With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note ) For connector cable of M8 connector, refer to back page. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page. For DC Without lead wire (with connector and of sockets only) : SY Lead wire length 00 mm 00 mm 00 mm 0 mm 00 mm 0 mm 000 mm 000 mm How to Order M8 Connector Cable : SY00 V09 7 Cable length 00 mm 00 mm 00 mm 00 mm 000 mm

8 osition Single G Grommet (G), (H): SYJ H MQ With bracket: G SYJ MFQ H (Light/surge voltage suppressor). 8. Series SYJ ø. (E port) M (, port).... G: pprox. 00 H: pprox. 00 (racket) ø M (, port) ø.8 (For monifold mounting).7 9. L plug connector (L): SYJ L M (F)Q M plug connector (M): SYJ M M (F)Q M8 connector (WO): SYJ WO M (F)Q (). pprox pprox. 00 () (). M8 x..... efer to back page for dimentions with connector cable.

9 Series SYJ000 osition Double G Grommet (G), (H): SYJ H M (F)Q ø. equivalent (8.) racket. 8 []. (8.) (.) ø. (E port) M (, port) (Light/surge voltage suppressor) G: pprox. 00 H: pprox. 00 M (, port) 7 ø.8 (For monifold mounting) L plug connector (L): SYJ L M (F)Q M plug connector (M): SYJ M M (F)Q M8 connector (WO): SYJ WO M (F)Q pprox pprox M8 x efer to back page for dimentions with connector cable.

10 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ H M (F)Q G 0. (.) (Light/surge voltage suppressor) ø. equivalent (8.) ø. (E port) M (, port) racket. 8. (8.) G: pprox. 00 H: pprox M (, port) 7 ø.8 (For monifold mounting) L plug connector (L): SYJ L M (F)Q M plug connector (M): SYJ M M (F)Q M8 connector (WO): SYJ WO M (F)Q pprox pprox M8 x efer to back page for dimentions with connector cable. 7

11 Series SYJ000 osition Single Grommet (G), (H): SYJ MQ G H (Light/surge voltage suppressor) M (,, port) 7... ø.... G: pprox. 00 H: pprox. 00 M (, port) L plug connector (L): SYJ L MQ M plug connector (M): SYJ M MQ M8 connector (WO): SYJ WO MQ.. pprox. 00. pprox M8 x efer to back page for dimentions with connector cable. 8

12 Series SYJ000 osition Double Grommet (G), (H): SYJ MQ G H (Light/surge voltage suppressor). ø. 8 M (,, port) G: pprox. 00 H: pprox. 00 M (, port) L plug connector (L): SYJ L MQ M plug connector (M): SYJ M MQ M8 connector (WO): SYJ WO MQ.. pprox. 00. pprox M8 x efer to back page for dimentions with connector cable. 9

13 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center G Grommet (G), (H): SYJ 0 MQ H (Light/surge voltage suppressor). 8 M (,, port) 7... ø G: pprox. 00 H: pprox. 00 M (, port) L plug connector (L): SYJ 0 L MQ M plug connector (M): SYJ 0 M MQ M8 connector (WO): SYJ 0() WO M Q.. pprox. 00. pprox M8 x efer to back page for dimentions with connector cable.

14 Manifold Standard Series SYJ000 Manifold Specifications Manifold Specifications Model Type Type, S Type, S Type, S Type, S Manifold type (SU), (EXH) Valve stations, port orting specifications ort size Location Direction, port, port Valve Top M M Single base/ mount Common SU/Common EXH to stations ase Side Common SU Individual EXH : : M M, C (Onetouch fitting for ø) Flow Characteristics ody ported for internal pilot Manifold Type SSYJ Type SSYJ S Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ0Q set (Manifold base) SSYJSCQ set (Manifold base) SYJGMQ sets (Valve) SYJLZQ sets (Valve) SYJ000Q set (lanking plate assembly) SYJ000Q set (alnking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Use manifold specification sheet. SYJ SYJ Type SSYJM Type SSYJC SYJ Type SSYJSM Type SSYJSC ase mounted Type SSYJM for internal pilot Type SSYJC SYJ Type SSYJSM Type SSYJSC Type SSYJM Type SSYJC SYJ Type SSYJSM Type SSYJSC ort size (), /() ort M M M (), () C b ort [dm /(s bar)] M M M C M C M C M C M C M C Flow characteristics / ( /) / / (/ ) Cv Q[l/min C (N)]* [dm /(s bar)] b Cv Q[l/min (N)]* Effective area (mm )

15 Series SYJ000 Flat ibbon Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port orting specifications ort size Location Direction, port, port pplicable flat ribbon cable connector Type Type Single base/ mount Common SU, Common EXH to stations Valve ase Top Side M M, C (Onetouch fitting for ø) Socket: pins MIL type with strain relief (MILC80) Internal wiring In common between COM and COM (Z type: COM only) ated voltage, VDC Note) The withstand voltage specification for the wiring unit section conforms to JIS C 070, Grade or its equivalent. Type Flow Characteristics ody ported for internal pilot ase mounted for internal pilot Manifold Type SSYJ SYJ Type SSYJM SYJ Type SSYJC Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold ort size (), /() ort (), () ort M M C SSYJ7CQ pc. (Manifold base) SYJLOUQ pcs. (Valve) SYJLOUQ pcs. (Valve) Flow characteristics / ( /) / / (/ ) C Q[l/min C Q[l/min b Cv b [dm /(s bar)] (N)]* [dm /(s bar)] (N)]* SYJ000Q pc. (lanking plate assembly) SY00078Q pcs. (Connector assembly) SY00079Q pcs. (Connector assembly) 79 7 Effective area (mm ) 0.9 The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. How to Order Valve For DC SYJ ated voltage Use manifold specification sheet. VDC VDC Light/surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Nonpolar type) Note) Z: ositive common specifications only. LO U How to Order Connector ssembly For, VDC Q Single solenoid Double solenoid, position type SY00078 SY00079 Type of actuation position single position double position closed center position exhaust center position pressure center, port size Symbol M ort size ase mounted M D E Nonlocking push type ushturn locking slotted type ushturn locking lever type

16 Series SYJ000 Common SU/Common EXH Type ( ort/ody ported), port M port M port M Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ 0 Number of stations 0 stations : : stations Q pplicable solenoid valve SYJ MQ SYJ MQ pplicable blanking plate assembly SYJ000Q Type ( ort/ase mounted) Type Type S Single solenoid coil is on ( ) same side as the, port. How to Order SSYJ 0 M Q, port M port M port M, port M Type ( ort/ase mounted), port M, C Type port port Type S, port M, C Single solenoid coil is on ( same side as the, port. ) port M port M port port Valve mounting direction S Single solenoid coil is on opposite side as the, port. Single solenoid coil is on same side as the, port. How to Order SSYJ Valve mounting direction S Single solenoid coil is on opposite side as the, port. Single solenoid coil is on same side as the, port. 0 M M C N Stations 0 stations : : stations, port size M Onetouch fitting for ø Onetouch fitting for ø/" Stations 0 stations : : stations Q pplicable solenoid valve SYJ 0 Q SYJ Q pplicable blanking plate assembly SYJ000Q, port thread type c F G N NT T NTF Type ( ort/ase mounted) port, port M, C Common SU/Individual EXH Type ( ort/ase mounted), port M, C Type Type Type S Single solenoid coil is on same side as the, port. ( ) port, port M, C Type S Single solenoid coil is on same side as the, port. port port port M ( ), port M, C port port How to Order SSYJ Valve mounting direction S Single solenoid coil is on opposite side as the, port. Single solenoid coil is on same side as the, port. How to Order SSYJ 0 C M C N M C N Stations 0 stations : : stations, port size M Onetouch fitting for ø Onetouch fitting for ø/" Note) For more than stations, supply air to both sides of port. port M Valve mounting direction S Single solenoid coil is on opposite side as the, port. Single solenoid coil is on same side as the, port. 0 M Stations 0 stations : : stations, port size M Onetouch fitting for ø Onetouch fitting for ø/" Q pplicable solenoid valve SYJ 0 Q SYJ Q pplicable blanking plate assembly SYJ000Q, port thread type c F G N NT T NTF pplicable solenoid valve SYJ 0 Q SYJ Q pplicable blanking plate assembly SYJ000Q port thread type c F G N NT T NTF Q

17 Series SYJ000 Flat ibbon Cable Manifold Common SU/Common EXH Type, port M port Type, port M, C port port port How to Order SSYJ 07 How to Order Stations 0 stations : : stations SSYJ 07 C 0 : Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. Stations stations : stations, port size M M C Onetouch fitting for ø N Onetouch fitting for ø/" Q, port thread type c 00F G 00N NT 00T NTF Q, port thread type c F G N NT T NTF pplicable solenoid valve efer to page. pplicable connector assembly efer to page. pplicable blanking plate assembly SYJ000Q (With dust cap) pplicable solenoid valve efer to page. pplicable connector assembly efer to page. pplicable blanking plate assembly SYJ000Q (With dust cap) Mixed Installation of the SYJ00 and the SYJ000 Valves on the Same Manifold Series SYJ00 valves can be mounted on the manifolds for Series SYJ000. q SSYJ, SSYJ The port valve can be used by simply sealing off the unused port with rubber plug SYJ000. pplicable solenoid valves: Series SYJ, SYJM, SYJ, SYJM w SSYJ, S, SSYJ, S, SSYJ, S, SSYJ The port valve can be used without modification. The port of the valve will flow out of the port of the manifold. pplicable solenoid valves: Series SYJ, SYJM, SYJ, SYJM e SSYJ, S The port valve can be used on the port manifold by simply sealing off the unused port with rubber plug SYJ000. The port of the valve will flow out of the port of the manifold. pplicable solenoid valves: Series SYJ, SYJM, SYJ, SYJM lug (SYJ000) Seal the unused port at the end the manifold. (SYJ00 port valve) (SYJ00 port valve) lug (SYJ000) Seal the unused port at the end the manifold. Caution Mounting screw tightening torques M.7: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. Type SSYJ Type SSYJ port of the port valve flows out of the manifold port.

18 Series SYJ000 Combinations of Solenoid Valve, Manifold Gasket and Manifold ase port body ported 0 (Type SYJ Q) Mark pplicable manifold base Type SSYJQ Type SSYJQ Manifold base port base mounted 0 (Type SYJ Q) Mark pplicable manifold base Type SSYJQ Type SSYJSQ Manifold Type SSYJQ base Type SSYJSQ Type SSYJQ rotrusion for positioning Manifold gasket port base mounted 0 (Type SYJ Q) Manifold gasket Manifold gasket SYJ0007 SYJ000 SYJ000 ound head combination screw SY0 (M.7 x 7, Matt nickel plated) pplicable manifold base Type SSYJQ Type SSYJSQ Manifold Type SSYJQ base Type SSYJSQ Note) Make sure to align the manifold gasket with the groove of the valve body. Combination of lanking late ssembly and Manifold ase lanking plate assembly SYJ000Q lanking plate assembly SYJ000Q ound head combination screw 0 Difference between SYJ and SYJ SYJ 0, ( port) SYJ 0, ( port) 0 lanking plate Steel ball is driven in. lanking plate Mark Manifold gasket Mark Manifold gasket pplicable manifold base Type SSYJQ Manifold base pplicable manifold base Subplate Type SSYJQ Type SSYJSQ Type SSYJQ Type SSYJSQ Type SSYJQ Manifold base Type SSYJSQ Type SSYJQ Type SSYJSQ Note) Manifold gasket SYJ000 can be used with the following manifold bases. Type SSYJQ Manifold base of Type Type SQ Q Type SQ Configuration of surface is different. lanking plate assembly SYJ000Q ound head combination screw lanking plate assembly SYJ000Q ound head combination screw lanking plate Mark lanking plate Mark Manifold gasket Manifold gasket Dust cap Dust cap pplicable manifold base Type SSYJQ Manifold base pplicable manifold base Type SSYJQ Manifold base Caution Mounting screw tightening torques M.7: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts.

19 Series SYJ000 Type Manifold: Top orted/ssyj Stations Q Grommet (G) (Station n) (Light/surge voltage suppressor) (Station ) pprox. 00 (itch) = M (, port) ø L L. M (, port) L plug connector (L) pprox. 00. M plug connector (M) M8 connector (WO) pprox. 00. M8 x efer to back page for dimentions with connector cable. Station n L L Station Station. 7.

20 Series SYJ000 Type Manifold: Side orted/ssyj Stations MQ Grommet (G) (Station ) (Light/surge voltage suppressor) (Station n) Type S Manifold: Side orted SSYJS Stations MQ Single solenoid coil is on same side as the, port M (, port) pprox (itch) =. L L (itch) = M (, port) ø (Station n) (Light/surge voltage suppressor) 9.7. M (, port) 7. 0 (itch) =. 9 L L (Station ) (itch) = ø. L plug connector (L) M plug connector (M) M8 connector (WO) M8 x pprox. 00. pprox efer to back page for dimentions with connector cable. Station n L L Station Station. 7. 7

21 Grommet (G) For M Series SYJ000 Type Manifold: Side orted/ssyj Stations M, C N Q (Station ) (Station n) For C N (uiltin onetouch fitting) (Light/surge voltage suppressor) (, port) pprox (itch) =. L L (itch) =. M (, port) ø (Station ) L L (Station n) (Light/surge voltage suppressor). (itch) Onetouch fitting =. (, port) pplicable tubing O.D.: ø, ø/" 7.. (.) L plug connector (L) M plug connector (M) M8 connector (WO) M8 x pprox pprox efer to back page for dimensions with connector cable. Type S Manifold: Side orted For M (Light/surge voltage suppressor) M (, port). (Station n) (itch) =. L L (Station ) Single solenoid coil is on same side as the, port /SSYJS Stations M, C N Q For C (uiltin onetouch fitting) N (Station n) (Station ) L L. (Light/surge voltage suppressor). Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch). = SSYJ, S Stations MQ Station n L L SSYJ, S Stations CQ Station n L L Station.. Station.. ø (itch) = (.) Station.. Station.. 8

22 Series SYJ000 Type Manifold: Side orted/ssyj Stations M, C N Q Grommet (G) For M (Station ) (Light/surge voltage suppressor) ( port) pprox ø. 7 (itch) =. L L (Station n) (itch) =. M (, port) ( port) For C N (uiltin onetouch fitting) (Light/surge voltage suppressor) (Station ).. ( port) (.) (Station n) 7 (itch) =. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" L plug connector (L) M plug connector (M) M8 connector (WO) M8 x pprox pprox efer to back page for dimentions with connector cable. Type S Manifold: Side orted Single solenoid coil is on same side as the, port. C /SSYJS Stations M, N Q For M (Station n) (Light/surge voltage suppressor) (Station ) For C N (uiltin onetouch fitting) (Light/surge voltage suppressor) (Station n) (Station ) 9.7 M (, port).. (itch) =. (itch) = Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) =... ( port) L L ø. (.) Station n L L Station Station 8.. 9

23 Type Manifold: Side orted/ssyj Stations M, C N Q Grommet (G) For M (Station ) (Light/surge voltage suppressor) 9 ( port) pprox (itch) =. (itch) =. (Station n) M (, port) Series SYJ000 For C N (uiltin onetouch fitting) (Station ) (Station n) (Light/surge voltage suppressor).8. (itch) Onetouch fitting =. (, port) pplicable tubing O.D.: ø, ø/" ( port) 8.8 L L ø. (.) L plug connector (L) 0.8 M plug connector (M) 0.8 M8 connector (WO) M8 x pprox pprox Type S Manifold: Side orted For M (Light/surge voltage suppressor) 9.9 M (, port).7..8 (Station n) (Station ) (itch) =...7 (itch) =.. Single solenoid coil is on same side as the, port C /SSYJS Stations M, N Q For C N (uiltin onetouch fitting) (Light/surge voltage suppressor) (Station n) (Station ) efer to back page for dimentions with connector cable. Onetouch fitting (itch) (, port) =. pplicable tubing O.D.: ø, ø/"..7 ( port) L L ø (.) Station n L L Station Station 8..

24 Series SYJ000 Flat ibbon Cable Manifold SSYJ Stations 00 Q (Station n) (Station ) (Light/surge voltage suppressor) L L pplicable connector: pins MIL type With strain relief (Conforming to MILC80) (, port).. M (, port) ø. (itch) = Triangle mark 8. SSYJ Stations M, C Q For C N N (uiltin onetouch fitting) For M (Station n) (Station ) (Light/surge voltage suppressor) pplicable connector: pins MIL type With strain relief (Conforming to MILC80) 8. L L (.) (, port).... ø. (itch) = Triangle mark Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (, port) (itch) =. 9. M (, port) (itch) =. 9. Station n L L Station Station 7..

25

26 ubber Seal ort Solenoid Valve Series SYJ000 Specifications For details about certified products conforming to international standards, visit us at ody ported Fluid position single Operating pressure range (Ma) position double position mbient and fluid temperature ( C) esponse time (ms) Note ) (at 0. Ma) Max. operating frequency (Hz) (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s ) Enclosure position single, double position position single, double position Note ) ir 0. to to to 0.7 to 0 (No freezing. efer to back page.) or less 0 or less Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted /0 Dust proof ( DIN terminal, M8 connector conforms to I.) ased on IEC09 Note ) ased on dynamic performance test, JIS (Coil temperature: C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energised and deenergised states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state) JIS Symbol ody ported position single ()() ()()() position double ()() ()()() position closed center ()() ()()() position exhaust center ()() ()()() position pressure center () () ()()() ase mounted ase mounted (with subplate) position single () () ()() position double ()() ()() position closed center ()() ()() position exhaust center () () ()() position pressure center () () ()() Made to Order (For details, refer to pages 78 through to 80.) Solenoid Specifications Electrical entry Coil rated voltage (V) DC C 0/0 Hz llowable voltage fluctuation ower consumption (W) DC Standard With power saving circuit 0 V V pparent power V [ V] C 0 V V [ V] Surge voltage suppressor Indicator light uiltin Speed Controller SYJ uiltin exhaust flow controls enable simple cylinder speed adjustments. When mounted on the manifold, the common exhaust discharges the pilot and main valve exhaust through a common EXH port to enable simple exhausting. () JIS Symbol () (Single) How to order valve with builtin speed controller SYJ Q Type of actuation ody Option ated voltage Lead wire ()() ort size Light/surge voltage suppressor Grommet (G), (H), L plug connector (L) M plug connector: (M), DIN terminal (D) M8 connector (W) G, H, L, M, W D,,,,, 0,, 0, ±% of rated voltage 0. {With light: 0. (DIN terminal with light: 0.)} 0. (With light only) 0.78 (With light: 0.87) 0.8 (With light: 0.97) [0.9 (With light:.07)]. (With light:.0).7 (With light:.) [.9 (With light:.0)] Diode (DIN terminal, Varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between VC and VC, and between VC and VC. For VDC and VDC, the allowable voltage is % to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to %, VDC: % to % T type: VDC: 8% to %, VDC: % to % Throttle Valve Characteristics ( ) Effective area (mm ) 0 (Fully 7 (Fully closed) open) When using SYJ model the speed controller must be opend more than complete rotation from fully closed in order to function proerly. djust the speed controller with a torque of 0. N m or less. late fixing screw Note) Do not loosen plate fixing screw.

27 Series SYJ000 Flow Characteristics/Weight ody ported ase mounted Valve model SYJ M position SYJ C position SYJ C position SYJ 0 0 position ody orted Series SYJM Type of actuation position position position position Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center ore size Series CJ verage speed ressure 0. Ma Series CM ressure 0. Ma (mm/s) Load rate: 0% Stroke 0 mm Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø Note ) ort size Flow characteristics, / ( /) / / (/ E/E) (, ) C [dm /(s bar)] b Cv Q[l/min(N)]* Grommet C [dm /(s bar)] b Cv Q[l/min(N)]* M M x [0.9] 0. [0.] 0. [0.] [] [0.9] 0. [0.8] 0. [0.] [] C 7 M (Onetouch fitting for ø) [0.] 0.7 [0.7] 0. [0.] 9 [9] [0.] 0. [0.7] 0. [0.] [9] C 7 M (Onetouch fitting for ø) [0.] 0.8 [0.8] 0. [0.] [] [0.] 0. [0.9] 0. [0.] [9] (9) () [0.0] 0. [0.] 0. [0.8] 70 [8] 9 (7) 0.99 [0.7] 0.9 [0.8] 0. [0.] [] ,, (, E, E) erpendicular, upward actuation Horizontal actuation L/M plug connector (7) 0 () (77) Note, ) Weight (g) DIN terminal (8) (8) (9) Note ) [ ]: denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. Note ) For DC voltages. For C voltages add g to the weight of the single solenoid and g to the weight of the double solenoid and position types. * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. Cylinder Speed Chart Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. M8 connector ase Mounted Series SYJ0 ore size Series CJ verage speed ressure 0. Ma Series CM ressure 0. Ma Series M/C ressure 0. Ma (mm/s) Load rate: 0% Stroke 0 mm Load rate: 0% Stroke 00 mm Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø0 ø0 ø0 ø ø80 ø Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ( (Load weight x 9.8) /Theoretical force) x 0% erpendicular, upward actuation Horizontal actuation Conditions SYJM ody ported Tubing bore x Length Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m ø8 x m SF0 S0F0 S0F08 NM N0 ase mounted Tubing bore x Length SYJ0 Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m SF0 S00F0 N N

28 Series SYJ000 Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center (For manifold type ) ated voltage DC V S S Z U VDC VDC VDC VDC VDC How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M, W DC specifications of type D and DO is only available with and VDC. Without light/surge voltage suppressor With surge voltage suppresor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) ower saving circuit is only available in the "Z" type. C ( 0 /0 Hz) 0 VC 0 VC VC [ VC] VC [ VC] C specification is only available with D, DO type. Electrical entry for D Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. racket, port size M M C Onetouch fitting for ø C Onetouch fitting for ø N Onetouch fitting for ø/" N7 Onetouch fitting for ø/" : Without bracket F: With bracket Note) The mounting bracket is supplied unattached. ody ported SYJ 0 L M Q ase mounted SYJ 0 L Q For subplate, manifold type 0,,, ody option 0: ilot valve individual exhaust for the pilot valve port, E port : Common exhaust type for main and pilot valve Coil specifications Standard With power saving circuit T < V, VDC only> ower saving circuit is not available in the case of D, DO or W type. : Nonlocking push type Thread type c F G N NT T NTF ort size Nil: Without subplate D: ushturn locking slotted type port, E port Electrical entry,,,, VDC, VDC,, 0,, 0, VC,, VDC Grommet L plug connector M plug connector DIN terminal M8 connector G: Lead wire L: With lead wire M: With lead wire MN: Without D: With connector WO: Without length 00 mm (Length 00 mm) (Length 00 mm) lead wire connector cable E: ushturn locking lever type (With gasket and screws) 0: With subplate H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO: Without connector W : With connector Note ) cable LN, MN type: with sockets. DIN terminal type Y which conforms to EN7080C (former DIN0C) is also available. For details, refer to page 79. For connector cable of M8 connector, refer to back page. Connector M8 type W conforming to IEC 097 standard, is also available. For details, see page 80. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page.

29 Series SYJ000 Construction position single () () position double () () () () () () () () () () () () e qy trw wq t r () () () i () () () i u position closed center/exhaust center/pressure center position closed center () () () ()() position exhaust center () () t q () () rw () ()() position pressure center () () i () ()() () () () (This figure shows a closed center type.) Component arts No. Description Material ody luminum diecasted iston plate esin End cover esin iston esin Spool valve assembly luminum, HN Spool spring Stainless steel Note White White White eplacement arts No. 7 8 Description Subplate ilot valve racket assembly No. SYJ000Q V(T) SYJ000 Note luminum diecasted

30 Series SYJ000 How to Order ilot Valve ssembly V Coil specifications Standard T With power saving circuit (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC G Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) Electrical entry G H L LN LO M MN MO WO W ower saving circuit is only available in the "Z" type. Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M8 connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note ) For connector cable of M8 connector, refer to back page. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page. How to Order Connector ssembly for L/M lug Connector For DC : SY00 Without lead wire (with connector and of sockets only) Lead wire length 00 mm 00 mm 00 mm 0 mm 00 mm 0 mm mm mm How to Order M8 Connector Cable : SY00 V09 V VDC VDC 0 VC 0/0 Hz D 0 VC 0/0 Hz VC 0/0 Hz [ VC 0/0 Hz] ated voltage VC 0/0 Hz [ VC 0/0 Hz] DC specifications of type D and DO is only available with and VDC. ower saving circuit is not available in the case of D or DO type. Light/surge voltage suppressor Without light/surge voltage suppressor S Z With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry D DIN With connector DO terminal Without connector Note) Do not replace V (G, H, L, M, W) to V (DIN terminal) and vice versa when replacing pilot valve assembly only. Cable length 00 mm 00 mm 00 mm 00 mm mm 7

31 Series SYJ000 osition Single G Grommet (G), (H): SYJ MQ H With bracket G SYJ MFQ. (Light/surge voltage suppressor).7 8. M (,, port). M (, port) ø. (E port) ø.. ø. (For monifold mounting) M (Mounting screw). 8 G: pprox. 00 H: pprox. 00 (racket) uiltin onetouch fitting: G C, N SYJ (F)Q. (.) ø. 9. H C, N Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/". H (.) L plug connector (L): SYJ L M(F)Q M plug connector (M): SYJ M M(F)Q DIN terminal (D): SYJ D M(F)Q M8 connector (WO): SYJ WO M(F)Q pprox (.) pprox. 00 ø.. 8. (.) Max. g7 ø. pplicable cable O.D. ø. to ø7. (.) ø. M8 x 7..7 (.).. 9. ø. efer to back page for dimentions with connector cable. 8

32 Series SYJ000 osition Double Grommet (G), (H): SYJ MQ G H uiltin onetouch fitting: G C, N SYJ Q H C, N7 M (,, port) ø. (E port) (Light/surge voltage suppressor) (.) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/"..7 ø G: pprox. 00 H: pprox M (, port) 9 ø. (For monifold mounting) L plug connector (L): SYJ L MQ M plug connector (M): SYJ M MQ DIN terminal (D): SYJ D MQ M8 connector (WO): SYJ WO MQ pprox pprox g7 Max. pplicable cable O.D. ø. to ø M8 x.. 7 ø ø ø. 7 ø. efer to back page for dimentions with connector cable. 9

33 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ G H MQ uiltin onetouch fitting: G C, N SYJ Q H C, N7 (Light/surge voltage suppressor) M (,, port) ø. (E port) (.). Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/"...9. G: pprox. 00 H: pprox ø.... [.] M (, port) 9 ø. (For monifold mounting) L plug connector (L): SYJ L MQ M plug connector (M): SYJ M MQ DIN terminal (D): SYJ D MQ M8 connector (WO): SYJ WO MQ pprox ø. pprox ø. Max. g7.. pplicable cable O.D. ø. to ø ø.. M8 x ø. 7 efer to back page for dimentions with connector cable. 0

34 Series SYJ000 osition Single Grommet (G), (H): SYJ 0 Q G H (Light/surge voltage suppressor) uiltin speed controller: G SYJ 0 Q H 9.. Max.. (, port) ø With interface regulator. G: pprox. 00 H: pprox (, port) L plug connector (L): SYJ L 0 Q M plug connector (M): SYJ M 0 Q DIN terminal (D): SYJ D 0 Q M8 connector (WO): SYJ WO 0 Q pprox pprox pplicable cable O.D. ø. to ø Max. g M8 x efer to back page for dimentions with connector cable.

35 Series SYJ000 osition Double G Grommet (G), (H): SYJ 0 Q H uiltin speed controller: G SYJ 0 Q H (Light/surge voltage suppressor) Max (, port) ø. 7. With interface regulator G: pprox. 00 H: pprox (, port) L plug connector (L): SYJ L 0 Q M plug connector (M): SYJ M 0 Q DIN terminal (D): SYJ D 0 Q M8 connector (WO): SYJ WO 0 Q pprox pprox pplicable cable O.D. ø. to ø Max. g M8 x efer to back page for dimentions with connector cable.

36 Series SYJ000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ 0 0 Q G H uiltin speed controller: SYJ 0 0 Q G H (Light/surge voltage suppressor) Max (, port) ø. 7. G: pprox. 00 H: pprox With interface regulator 8. (, port) L plug connector (L): SYJ 0 L 0 Q 0..7 pprox. 00 M plug connector (M): SYJ 0 M 0 Q. pprox. 00 DIN terminal (D): SYJ 0 D 0 Q pplicable cable O.D. ø. to ø Max. g7 M8 connector (WO): SYJ 0 WO 0 Q. 7. M8 x efer to back page for dimentions with connector cable.

37 Series SYJ000 Manifold Specifications Manifold Standard Manifold Specifications Model Type Type 0 Type Type Type Manifold type Single base/ mount (SU), (EXH) Common SU, Common EXH Valve stations, port orting specifications ort size Location Direction, port, port Valve Top M, C (Onetouch fitting for ø) C (Onetouch fitting for ø) to stations ase ottom M ase Side /, C (Onetouch fitting for ø) C (Onetouch fitting for ø) Flow Characteristics ody ported for internal pilot Manifold Type SSYJ SYJ Type SSYJ0 Type SSYJ ase mounted Type SSYJ SYJ for internal pilot Type SSYJC Type SSYJ ort size (), /() ort / / (), () ort M C C M M C C Flow characteristics / ( /) / / (/ ) C C b Cv Q[l/min(N)]* [dm /(s bar)] [dm /(s bar)] b Cv Q[l/min(N)]* Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ0Q pc. (Manifold base) SYJGMQ pcs. (Valve) SYJ000Q pc. (lanking plate assembly) SSYJ0CQ pc. (Manifold base) SYJLZQ pc. (Valve) SYJLZQ pc. (Valve) SYJ000Q pc. (lanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Use manifold specification sheet.

38 Series SYJ000 Flat ibbon Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port orting specifications ort size pplicable flat ribbon cable connector Internal wiring Type Type Type Single base/ mount Common SU, Common EXH to stations Location Direction, port Valve Top ase Side, port M, C C (Onetouch fitting for ø) M C (Onetouch fitting for ø) (Onetouch fitting for ø) Socket: pins MIL type with strain relief (MILC80) In common between COM and COM (Z type: COM only). ated voltage, VDC Note) The withstand voltage specification for the wiring unit section conforms to JIS C 070, Grade or its equivalent. Flow Characteristics How to Order Valve For DC SYJ LO Z How to Order Connector ssembly ated voltage Light/surge voltage suppressor For, VDC VDC Z With light/surge voltage suppressor Single solenoid SY00078 VDC U With light/surge voltage suppressor(nonpolar type) Double solenoid, position type SY00079 Note) Z: ositive common specifications only. Single solenoid, individual SU, EXH spacer SY0007 Double solenoid, position individual SU/EXH spacer SY0007 Interface regulator for single solenoid SY0007 Double solenoid, position interface regulator SY0007 port adaptor plate SY0007 ody ported for internal pilot Manifold Type SSYJ SYJ ase mounted Type SSYJ SYJ for internal pilot Type SSYJ C Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ7CQ pc. (Manifold base) SYJLOUQ pcs. (Valve) SYJLOUQ pcs. (Valve) SYJ000Q pc. (lanking plate assembly) SY00078Q pcs. (Connector assembly) SY00079Q pcs. (Connector assembly) Use manifold specification sheet. ort size (), /() (), () ort ort M C C M Flow characteristics / ( /) / / (/ ) C C b Cv Q[l/min(N)]* b Cv Q[l/min(N)]* [dm /(s bar)] The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Q [dm /(s bar)] D E Type of actuation position single position double position closed center position exhaust center position pressure center Nonlocking push type ushturn locking slotted type ushturn locking lever type, port size Symbol M C C N N7 ort size ase mounted M Onetouch fitting for ø Onetouch fitting for ø Onetouch fitting for ø/" Onetouch fitting for ø/"

39 Series SYJ000 Common SU/Common EXH Type ( ort/ody ported), port M Type 0 ( ort/ase mounted), port M port port port port Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ 0 Number of stations 0 stations : : stations How to Order SSYJ 0 0 M Stations 0 stations : : stations M, port size M, port thread type 00F 00N 00T c G NT NTF, port thread type F N T Q c G NT NTF Q pplicable solenoid valve M SYJ CQ C M SYJ CQ C pplicable blanking plate assembly SYJ000Q pplicable individual EXH spacer assembly SYJ0007Q pplicable solenoid valve SYJ 0 Q SYJ Q SYJ 0 Q SYJ Q pplicable blanking plate assembly SYJ000Q pplicable individual EXH spacer assembly SYJ0007Q pplicable interface regulator YJ00000Q Type ( ort/ase mounted) How to Order SSYJ 0 M Q, port M Type ( ort/ase mounted), port, C Type ( ort/ase mounted) port port port / port / 0 : M Stations stations : stations How to Order, port size M Stations 0 stations : : stations, port size 0 C Onetouch fitting for ø N7 Onetouch fitting for ø/" How to Order, port thread type F N T SSYJ 0 C SSYJ 0 C c G NT NTF Thread type F N T c G NT NTF Q Q pplicable solenoid valve SYJ 0 Q SYJ Q SYJ 0 Q SYJ Q pplicable blanking plate assembly SYJ000Q pplicable individual EXH spacer assembly SYJ0007Q pplicable individual SU spacer assembly SYJ000Q pplicable interface regulator YJ00000Q Stations, port C port port 0 : stations : stations, port size C Onetouch fitting for ø N Onetouch fitting for ø/", port thread type F N T c G NT NTF

40 Series SYJ000 Flat ibbon Cable Manifold Common SU/Common EXH Type ( ort/ody ported), port Type ( ort/ase mounted) port port Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ 0 Number of stations 0 : stations : stations How to Order SSYJ 0 M, port thread type 00F 00N 00T Q c G NT NTF Q pplicable solenoid valve efer to page. pplicable blanking plate assembly SYJ000Q pplicable connector assembly efer to page., port M port port Type ( ort/ase mounted), port C port port Number of stations 0 stations : : stations How to Order SSYJ 0 C Number of stations 0 stations : : stations, port thread type, port size C N Onetouch fitting for ø Onetouch fitting for ø/" F N T Combinations of Solenoid Valve, Manifold Gasket and Manifold ase F N T c G NT NTF Q, port thread type c G NT NTF pplicable solenoid valve efer to page. pplicable blanking plate assembly SYJ000Q pplicable connector assembly efer to page. ound head combination screw M. x, Matt nickel plated (with spring washer) ound head combination screw M. x, Matt nickel plated (with spring washer) Manifold Gasket DXT9 pplicable manifold base Type SSYJQ lanking late ssembly Manifold Gasket DXT9 pplicable manifold base Subplate: SYJ000 Q Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ Thread type F N T c G NT NTF SYJ000Q SYJ000Q SYJ000Q pplicable manifold base Type SSYJQ SYJ000Q pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ ound head combination screw lanking plate Gasket (ositioning pin) ound head combination screw lanking plate Gasket Caution Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for Dust cap 7 pplicable manifold base Type SSYJQ Dust cap pplicable manifold base Type SSYJQ Type SSYJQ solenoid valves, gasket, and optional parts.

41 Series SYJ000 Mix Installation of the SYJ00 and the SYJ000 Valves on the Same Manifold Use of an adapter plate makes it possible to mount Series SYJ00 on the manifold bases of series SYJ000. When mounting the SYJ00 valve on the SYJ000 manifold, the SYJ00 solenoid must be positioned on the same side of the manifold as a single solenoid SYJ00. (efer to the figure below.) For base mounted style, the port of the port valve flows out the port of manifold base. dapter late ssembly SYJ00Q ound head combination screw SYJ00Q Interface egulator ( port regulation) Spacer type regulating valve on manifold block can regulate the pressure to the valve individually. YJ00000Q ound head combination screw ase mounted Gasket 7 ound head combination screw dapter plate 7 ound head combination screw dapter plate dapter gasket Gasket pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ dapter gasket pplicable manifold base Type SSYJQ pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ efer to back page prior to handling. Individual EXH Spacer ssembly SYJ0007Q ound head combination screw Manifold gasket ositioning pin SYJ0007Q ound head combination screw Manifold gasket Individual SU Spacer ssembly SYJ000 ound head combination screw Q Thread type F N T c G NT NTF Manifold gasket Individual EXH spacer Individual SU spacer pplicable manifold base Type SSYJQ pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ Individual SU spacer Caution pplicable manifold base Type SSYJQ Type SSYJQ Type SSYJQ Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. 8

42 Series SYJ000 Type : Top orted/ssyj Stations 00 Q Grommet (G) (Station n) (Station ) (Light/surge voltage suppressor). pprox (DIN.) (itch) =.. (DIN 0.8)... 9 (, port) (DIN.8).. L 9 L 8. (DIN.) ø. 7. [9.] M (, port) 87. uiltin onetouch fitting (.).8 L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) pprox pprox Max.. g pplicable cable O.D. ø. to ø M8 x efer to back page for dimentions with connector cable. Station n L L 9 Station Station 8

43 Series SYJ000 Type 0: ottom orted/ssyj0 Stations M Q Grommet (G) M (, port) uiltin speed controller... (DIN.7). (itch) = (Station n) (Station ) (Light/surge voltage suppressor) pprox L L 9 ø (, port).9 (DIN 8.). (DIN.) (itch) =.. (DIN.7). 87. Max... L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) pprox. 00 pprox. 00 Max. g7 pplicable cable O.D. ø. to ø7 9.7 M8 x efer to back page for dimentions with connector cable. Station n L L Station Station 8 0

44 Series SYJ000 Type : Side orted/ssyj Stations M Q Grommet (G) (Station ) (Station n) (Light/surge voltage suppressor) pprox. 00. (itch) = L L. M (, port) ø. uiltin speed controller (DIN 9.) (DIN 8.7) Max.. 7. (, port).9 (DIN.).. (DIN.7) 8 (itch) = L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) M8 x pprox pprox. 00 Max. g7 pplicable code O.D. ø. to ø7 efer to back page for dimentions with connector cable. Station n L L Station Station 0

45 Series SYJ000 Type : Side orted/ssyj Stations 0, C N7 Q Grommet (G) For 0 C For N7 (uiltin onetouch fitting) uiltin speed controller (Light/surge voltage suppressor) Max / (, port) pprox (DIN.).9 ( DIN 7.).. (Station ) (itch) = 7 L L (itch) = 7 (Station n) (DIN.7) (DIN.7). 87. (, port) ø. (Light/surge voltage suppressor).. (Station ) / (, port) (itch) = (Station n) 8. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" Other dimensions are the same as the grommet type. L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) 0. 7 pprox pprox Max g pplicable code O.D. ø. to ø M8 x efer to back page for dimentions with connector cable., port size For For C/N7 Station n L L L L Station Station 7 9 0

46 Series SYJ000 C Type : Side orted/ssyj Stations Q Grommet (G) N (Light/surge voltage suppressor) (Station ) (Station n) pprox (itch) = L L Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (, port) (DIN.7). ø. 9.9 (DIN:.) 87. uiltin slottle valve Max (DIN 9.7). (.).. (DIN:.) 8 (itch) = L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) M8 x pprox pprox Max g7 pplicable code O.D. ø. to ø efer to back page for dimentions with connector cable. Station n L L Station Station 0

47 Series SYJ000 Flat ibbon Cable Manifold SSYJ Stations 00 Q (Light/surge voltage suppressor) (Station n) (Station ) C N For C N7 (uiltin onetouch fitting) Onetouch fitting ø, ø/" (, port) pplicable tubing O.D.: ø, ø/", ø, ø/" (.) M (, port) pplicable connector: pins With strain relief (Conforming to MILC80) L L ø (, port) (itch) = 7. Triangle mark Station n L L Station Station.. SSYJ Stations M Q (Light/surge voltage suppressor) uiltin slottle valve pplicable connector: pins With strain relief (Conforming to MILC80) L L (itch) = 7. (Station ) (itch) = Max (, port) ø. M (, port) (Station n). Triangle mark Station n L L Station Station. 9.

48 Series SYJ000 Flat ibbon Cable Manifold C SSYJ Stations Q N (Station n) (Light/surge voltage suppressor) (itch) = 7. (Station ) pplicable connector: pins With strain relief (Conforming to MILC80) 8. uiltin speed controller L L (.) Max.. (, port) ø. Triangle mark Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) = Station n L L Station Station. 9.

49

50 ubber Seal ort Solenoid Valve Series SYJ7000 Specifications For details about certified products conforming to international standards, visit us at ody ported Fluid Operating pressure range (Ma) position mbient and fluid temperature ( C) esponse time (ms) Note ) (at 0. Ma) Max. operating frequency (Hz) (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s ) Enclosure position single position double position single, double position position single, double position Note ) ir 0. to to to 0.7 to 0 (No freezing. efer to back page.) 0 or less 0 or less Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted /0 Dust proof ( DIN terminal, M8 connector conforms to I.) ased on IEC09 Note ) ased on dynamic performance test, JIS (Coil temperature: C, at rated voltage, without surge suppressor) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energised and deenergised states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve and armature when pilot signal is ON and OFF. (Value in the initial state) JIS Symbol ody ported position single ()() ()()() position double ()() ()()() position closed center () () ()()() position exhaust center ()() ()()() position pressure center ()() ase mounted ase mounted position single solenoid ()() ()()() position double solenoid ()() ()()() position closed center () () ()()() position exhaust center () () ()()() position pressure center () () Solenoid Specifications Electrical entry Coil rated voltage (V) DC C 0/0 Hz llowable voltage fluctuation ower consumption (W) DC Standard With power saving circuit 0 V V pparent power V [ V] C 0 V V [ V] Surge voltage suppressor Indicator light Grommet (G), (H) L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (W) G, H, L, M, W,,,,, 0,, 0, ±% of rated voltage 0. {With light: 0. (DIN terminal with light: 0.)} 0. (With light only) [.9 (With light:.0)] Diode (DIN terminal, Varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between VC and VC, and between VC and VC. For VC and VC, the allowable voltage is % to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: 7% to %, VDC: % to % T type: VDC: 8% to %, VDC: % to % D 0.78 (With light: 0.87) 0.8 (With light: 0.97) [0.9 (With light:.07)]. (With light:.0).7 (With light:.) ()()() ()()() Made to Order (For details, refer to pages 78 through to 80.) 7

51 Series SYJ7000 Flow Characteristics/Weight ody ported ase mounted ort size Flow characteristics Note ) Weight (g) Note, ) Valve model Type of actuation,,, / ( /) / / (/ E/E) L/M plug DIN M8 (,E,E) (,) Grommet C [dm /(s bar)] b Cv Q[l/min(N)]* C [dm /(s bar)] b Cv Q[l/min(N)]* connector terminal connector Single position Double SYJ7 0 Closed center position Exhaust center [.] 0.[0.] 0.7 [0.9] 788 [89] 8 8 ressure center.0 [0.8] 0.7 [0.0] 0.78 [0.] 799 [] Single position Double C 9 9 SYJ7 C Closed center (Onetouch position Exhaust center fitting for ø) [.] 0.[0.] 0. [0.8] [9] 9 9 ressure center.8 [0.78] 0. [0.0] 0. [0.] 7 [] Single position Double C8 9 9 SYJ7 C8 Closed center (Onetouch position Exhaust center fitting for ø8) [.] 0.[0.9] 0.7 [0.8] 8 [79] 9 9 ressure center.9 [0.8] 0.7 [0.] 0.9 [0.] 9 [] Single (8) (8) 87 (7) 70 (90) position Double 78 (98) 80 (0) () 88 (8) SYJ7 0 0 Closed center position Exhaust center [.] 0.[0.7] 0.8 [0.] 899 [0] 88 (8) 90 () () 98 (8) ressure center. [0.8] 0. [0.] 0.78 [0.] 98 [9] Single (8) (8) 87 (7) 70 (90) position Double 78 (98) 80 (0) () 88 (8) SYJ7 0 0 Closed center / / position Exhaust center [.] 0.7[0.] 0.87 [0.] 9 [] 88 (8) 90 () () 98 (8) ressure center. [0.8] 0. [0.] 0.8 [0.] 877 [] Note ) [ ]: denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. Note ) For DC voltages. For C voltages add g to the weight of the single solenoid and g to the weight of the double solenoid and position types. * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. Cylinder Speed Chart ody orted Series SYJ70 ase Mounted Series SYJ70 Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. ore size Series CJ verage speed ressure 0. Ma Series M/CM ressure 0. Ma Series M/C ressure 0. Ma (mm/s) Load rate: 0% Stroke 0 mm Load rate: 0% Stroke 00 mm Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø0 ø0 ø0 ø ø80 ø erpendicular, upward actuation Horizontal actuation ore size Series CJ verage speed ressure 0. Ma Series M/CM ressure 0. Ma Series M/C ressure 0. Ma (mm/s) Load rate: 0% Stroke 0 mm Load rate: 0% Stroke 00 mm Load rate: 0% Stroke 00 mm ø ø ø ø ø ø ø0 ø0 ø0 ø ø80 ø Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ( (Load weight x 9.8) /Theoretical force) x 0% erpendicular, upward actuation Horizontal actuation Conditions SYJ70 ody ported Tubing bore x Length Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m SF0 S0F0 S00F N0 N00 ase mounted Tubing bore x Length SYJ70 Speed controller Silencer Series CJ Series CM Series M/C ø x m SF0 S00F0 N0 N00 N0F0 8

52 Series SYJ7000 Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center (For manifold type, ) ody ported ated voltage DC V S VDC VDC VDC VDC VDC DC specifications of type D and DO is only available with and VDC. SYJ7 0 How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M, W Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) ower saving circuit is only available in the "Z" type. C ( 0 /0 Hz) 0 VC 0 VC VC [ VC] VC [ VC] C specification is only available with D, DO type. M Electrical entry for D Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Thread type c F G N NT T NTF, port size 0 C Onetouch fitting for ø C8 Onetouch fitting for ø8 N7 Onetouch fitting for ø/" N9 Onetouch fitting for ø/" 0 racket : Without bracket F: With bracket Q Note) Do not remove the factory installed bracket from models with the bracket option. emoval of the bracket will cause the valve to leak. rackets cannot be retrofitted. ase mounted SYJ7 0 M Q For subplate, manifold type 0,, ody option 0: ilot valve individual exhaust for the pilot valve port, E port : Common exhaust type for main and pilot valve Coil specifications T Standard With power saving circuit < V, VDC only> ower saving circuit is not available in the case of D, DO or W type. : Nonlocking push type Thread type c F G N NT T NTF ort size : Without subplate port, E port D: ushturn locking slotted type Electrical entry,,,, VDC Grommet L plug connector M plug connector G: Lead wire L: With lead wire M: With lead wire MN: Without length 00 mm (Length 00 mm) (Length 00 mm) lead wire, VDC,, 0,, 0, VC,, VDC DIN terminal M8 connector D: With connector WO: Without connector cable E: ushturn locking lever type (With gasket and screws) Note) 0: /8 With subplate 0: / With subplate H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO: Without connector W : With connector Note ) cable 9 LN, MN type: with sockets. DIN terminal type Y which conforms to EN7080C (former DIN0C) is also available. For details, refer to page 79. For connector cable of M8 connector, refer to back page. Connector M8 type W conforming to IEC 097 standard, is also available. For details, see page 80. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page. Note), port: /

53 Series SYJ7000 Construction ()() position single position double () () ()() () ()() () e yq t r w w q t r () () () () i i () () () () () () position closed center/exhaust center/pressure center u position closed center ()() ()()() position exhaust center ()() t q rw () () ()()() position pressure center ()() i ()()() () () () (This figure shows a closed center type.) Component arts No. Description Material ody luminum diecasted iston plate esin End cover luminum diecasted iston esin Spool valve assembly luminum, HN Spool spring Stainless steel Note White White White eplacement arts No. 7 8 Description Subplate ilot valve No. SYJ7000Q SYJ7000Q V(T) / Note luminum diecasted How to Order ilot Valve ssembly V G V D Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) ower saving circuit is only available in the "Z" type. Electrical entry G H L LN LO M MN MO WO W Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M8 connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note ) For connector cable of M8 connector, refer to back page. ated voltage VDC VDC 0 VC 0/0 Hz 0 VC 0/0 Hz VC 0/0 Hz [ V C 0/0 Hz] VC 0/0 Hz [ VC 0/0 Hz] Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to back page. Light/surge voltage suppressor S Z Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry D DIN With connector DO terminal Without connector Note) Do not replace V (G, H, L, M, W) to V (DIN terminal) and vice versa when replacing pilot valve assembly only. 0

54 Series SYJ7000 How to Order Connector ssembly for L/M lug Connector How to Order M8 Connector Cable For DC Without lead wire : SY00 (with connector and of sockets only) Lead wire length 00 mm 00 mm 00 mm 0 mm 00 mm 0 mm mm mm : SY00 V09 Cable length 00 mm 00 mm 00 mm 00 mm mm

55 Series SYJ7000 osition Single Grommet (G), (H): SYJ7 0 Q G H With bracket: G SYJ7 0 FQ H (,, port) 7. ø. (E port) (Light/surge voltage suppressor) ø.. 8. ø. (For manifold mounting) (, port) G: pprox. 00 H: pprox. 00 uiltin onetouch fitting: C, N7 SYJ7 (F)Q (.9) G H C8, N9 (racket). ø.. 9. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/" (.) 8. 7 L plug connector (L): SYJ7 L 0 (F)Q M plug connector (M): SYJ7 M 0 (F)Q DIN terminal (D): SYJ7 D 0 (F)Q M8 connector (WO): SYJ7 WO 0 (F)Q pprox pprox. 00. Max. pplicable cable O.D. ø. to ø g M8 x ø. 8 (.) ø. 8 (.) ø. ø. 8 8 (.) (.) efer to back page for dimentions with connector cable.

56 Series SYJ7000 osition Double Grommet (G), (H): SYJ7 0 Q G H uiltin onetouch fitting: G C, N7 SYJ7 Q H C8, N9 (.9) (Light/surge voltage suppressor) (,, port) ø. 7. ø. (E port) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/".. G: pprox. 00 H: pprox. 00 ø. (For manifold mounting) 7 (, port) L plug connector (L): SYJ7 L 0 Q pprox M plug connector (M): SYJ7 M 0 Q pprox. 00. DIN terminal (D): SYJ7 D 0 Q Max M8 connector (WO): SYJ7 WO 0 Q M8 x ø ø... ø ø. 8 g7 8 pplicable cable O.D. ø. to ø7 8 8 efer to back page for dimentions with connector cable.

57 Series SYJ7000 osition Closed Center/Exhaust Center/ressure Center Grommet (G), (H): SYJ7 0 Q G H uiltin onetouch fitting: SYJ7 C, N7 Q G H C8, N (Light/surge voltage suppressor) (,, port) ø. ø. (E port) (.9) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/"..... G: pprox. 00 H: pprox ø. (For manifold mounting) 7 (, port) L plug connector (L): SYJ7 L 0 Q M plug connector (M): SYJ7 M 0 Q DIN terminal (D): SYJ7 D 0 Q M8 connector (WO): SYJ7 WO 0 Q pprox pprox. 00. Max M8 x ø ø ø ø. 8 8 g7 8 8 pplicable cable O.D. ø. to ø7 efer to back page for dimentions with connector cable.

58 Series SYJ7000 osition Single Grommet (G), (H): SYJ7 G 0 H 0 Q /, (,, port) (Light/surge voltage suppressor) ø. With interface regulator G: pprox. 00 H: pprox / (, port) L plug connector (L): 0 SYJ7 L Q 0 M plug connector (M): 0 SYJ7 M Q 0 DIN terminal (D): 0 SYJ7 D Q 0 M8 connector (WO): 0 SYJ7 WO Q pprox pprox pplicable cable O.D. ø. to ø g7. Max... M8 x efer to back page for dimentions with connector cable.

59 Series SYJ7000 osition Double G 0 H 0 Grommet (G), (H): SYJ7 Q /, (,, port) (Light/surge voltage suppressor) G: pprox. 00 H: pprox With interface regulator ø / (, port).. 8. L plug connector (L): 0 SYJ7 L Q 0 M plug connector (M): 0 SYJ7 M Q 0 DIN terminal (D): 0 SYJ7 D Q 0 M8 connector (WO): 0 SYJ7 WO Q pprox pprox. 00 pplicable cable O.D. ø. to ø M8 x g Max efer to back page for dimentions with connector cable.

60 Series SYJ7000 osition Closed Center/Exhaust Center/ressure Center G 0 Grommet (G), (H): SYJ7 0 H Q 0 /, (,, port) (Light/surge voltage suppressor) G: pprox. 00 H: pprox. 00 ø.. With interface regulator / (, port) L plug connector (L): 0 SYJ7 0 L Q 0 M plug connector (M): SYJ7 0 0 M Q 0 DIN terminal (D): 0 SYJ7 0 D Q 0 M8 connector (WO): 0 SYJ7 0 WO Q pprox pprox pplicable cable O.D. ø. to ø g7.. Max. 87. M8 x efer to back page for dimentions with connector cable. 7

61 Series SYJ7000 Manifold Specifications Manifold Standard Manifold Specifications Model Type Type Type 0 Type Type Manifold type (SU), (EXH) Valve stations, port orting specifications ort size Location Direction, port, port to stations Valve Top C (Onetouch fitting for ø) C8 (Onetouch fitting for ø8) Single base/ mount Common SU, Common EXH to stations ase ottom / ase Side C (Onetouch fitting for ø) C8 (Onetouch fitting for ø8) Flow Characteristics Manifold Type SSYJ7 ody ported for internal pilot Type SSYJ7 ase mounted for internal pilot Type SSYJ70 Type SSYJ7 Type SSYJ7C Type SSYJ7C8 SYJ7 SYJ7 ort size (), /() ort / / / / / / / (), () ort C C8 C C8 C C8 Flow characteristics / ( /) / / (/ ) C C b Cv Q[l/min(N)]* [dm /(s bar)] [dm /(s bar)] b Cv Q[l/min(N)]* Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ70Q pc. (Manifold base) SYJ7G0Q pcs. (Valve) SYJ7000Q pc. (lanking plate assembly) SSYJ70Q pc. (Manifold base) SYJ7LZQ pc. (Valve) SYJ7LZQ pc. (Valve) SYJ7000Q pc. (lanking plate assembly) Use manifold specification sheet. The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. 8

62 Series SYJ7000 Flat ibbon Cable Manifold Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port location ort size pplicable flat ribbon cable connector Internal wiring, port, port Type Single base/ mount Common SU, Common EXH to stations Valve /, C, C8 Socket: pins MIL type with strain relief (MILC80) In common between COM and COM (Z type: COM only). ated voltage, VDC Note ) The value is for manifold base and individually operated position type. Note ) The withstand voltage specification for the wiring unit section is JIS C 070, Grade or its equivalent. Flow Characteristics ody ported for internal pilot Manifold Type SSYJ7 Type SSYJ7C SYJ7 ort size (), /() ort / / Type SSYJ7C8 / C Note) Value at manifold base mounted, position single operating * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. How to Order Manifold (Example) (), () ort C Flow characteristics / ( /) / / (/ ) C C b Cv Q[l/min(N)]* b Cv Q[l/min(N)]* [dm /(s bar)] [dm /(s bar)] Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ77Q pc. (Manifold base) SYJ7LOUC8Q pcs. (Valve) SYJ7LOUC8Q pcs. (Valve) SYJ7000Q pc. (lanking plate assembly) SY0007 pcs. (Connector assembly) SY0007 pcs. (Connector assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc How to Order Valve For DC SYJ7 ated voltage Use manifold specification sheet. VDC VDC Light/surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Nonpolar type) Note) Z: ositive common specifications only. LO Z 0 How to Order Connector ssembly For, VDC Single solenoid SY0007 Double solenoid, position type SY0007 Single solenoid, individual SU, EXH spacer SY0007 Double solenoid, position individual SU/EXH spacer SY0007 Interface regulator for single solenoid SY0007 Double solenoid, position interface regulator SY0007 port adaptor plate SY0007 Q Type of actuation position single position double position closed center position exhaust center position pressure center D E Nonlocking push type ushturn locking slotted type ushturn locking lever type Symbol 0 C C8 N7 N9, port size ort size Onetouch fitting for ø Onetouch fitting for ø8 Onetouch fitting for ø/" Onetouch fitting for ø/" 9

63 Manifold Standard /Common SU/Common EXH Series SYJ7000 Type ( ort/ody ported), port Type ( ort/ody ported), port Type 0 ( ort/ase mounted) port / port / Type ( ort/ase mounted), port Type ( ort/ase mounted), port port port port / port /, port port / port / port / port / How to Order SSYJ7 0 SSYJ Stations 0 stations : : stations Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order 0 : How to Order 0 : Stations stations : stations Stations stations : stations, port size 0 SSYJ7 0 0, port size 0 Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. SSYJ7 0 C Q, port Stations thread type pplicable solenoid valve c 0 stations 00F G 0 : : SYJ7 CQ 00N NT C8 stations 00T NTF 0 SYJ7 CQ C8 Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. pplicable blanking How to Order plate assembly SSYJ7 0 Q SYJ7000Q Stations, port pplicable individual thread type 0 stations EXH spacer assembly c : : SYJ70007Q 00F G stations 00N NT 00T NTF Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order, port size C Onetouch fitting for ø C8 Onetouch fitting for ø8 N7 Onetouch fitting for ø/" N9 Onetouch fitting for ø/" Thread type Thread type Thread type Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. F N T F N T Q Q F N T Q c G NT NTF c G NT NTF c G NT NTF pplicable solenoid valve SYJ7 0 Q SYJ7 Q pplicable blanking plate assembly SYJ7000Q pplicable individual EXH spacer assembly SYJ70007Q pplicable individual SU spacer assembly SYJ7000Q pplicable interface regulator YJ700000Q Flat ibbon Cable Manifold /Common SU/Common EXH Type ( ort/ody ported), port port / port / How to Order SSYJ7 0 Stations 0 stations : : stations, port thread type 00F 00N 00T Q c G NT NTF Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. pplicable solenoid valve efer to page 9. pplicable blanking plate assembly SYJ7000Q pplicable connector assembly efer to page 9. 0

64 Series SYJ7000 Combinations of Solenoid Valve, Manifold Gasket and Manifold ase Mix Installation of the SYJ700 and the SYJ7000 Valves on the Same Manifold ound head combination screw M x Matt nickel plated (with spring washer) ound head combination screw M x Matt nickel plated (with spring washer) Use of an adapter plate makes it possible to mount Series SYJ700 on the manifold bases of series SYJ7000. When mounting the SYJ700 valve on the SYJ7000 manifold, the SYJ700 solenoid must be positioned on the same side of the manifold as a single solenoid SYJ700. (efer to the figure below.) For base mounted style, the port of the port valve flows out the port of manifold base. Gasket DXT99 Gasket DXT99 dapter plate assembly SYJ700Q SYJ700 Series ody ported dapter plate assembly SYJ700Q SYJ700 Series ase mounted pplicable manifold base Type SSYJ7Q Type SSYJ7Q pplicable manifold base Subplate Type SSYJ70Q Type SSYJ7Q Type SSYJ7Q Individual EXH Spacer ssembly ound head combination screw ound head combination screw SYJ70007 ound head combination screw Q Thread type c F G N NT T NTF SYJ70007 ound head combination screw Q Thread type c F G N NT T NTF Gasket ound head combination screw 7 ound head combination screw 7 dapter plate dapter plate Individual EXH spacer Manifold gasket pplicable manifold base Type SSYJ7Q Type SSYJ7Q Individual SU Spacer ssembly SYJ7000 ound head combination screw Individual SU spacer Manifold gasket Caution Q Mounting screw tightening torques M: 0.8 N m Individual EXH spacer Manifold gasket Thread type c F G N NT T NTF pplicable manifold base Type SSYJ70Q Type SSYJ7Q Type SSYJ7Q pplicable manifold base Type SSYJ70Q Type SSYJ7Q Type SSYJ7Q Interface egulator ( port regulation) YJ700000Q ound head combination screw Gasket Oring Spacer type regulating valve on manifold block can regulate the pressure to the valve individually. ase mounted pplicable manifold base Type SSYJ7 Type SSYJ7 pplicable manifold base Type SSYJ70Q Type SSYJ7Q Type SSYJ7Q Dust cap SYJ7000Q Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. Manifold gasket pplicable manifold base Type SSYJ70 Type SSYJ7 Type SSYJ7 lanking late ssembly SYJ7000Q pplicable manifold base Type SSYJ7Q Type SSYJ7Q efer to back page prior to handling. SYJ7000Q pplicable manifold base Type SSYJ70Q Type SSYJ7Q Type SSYJ7Q ound head combination screw lanking plate Gasket pplicable manifold base Type SSYJ7Q

65 Series SYJ7000 Type : Top roted/ssyj7 Stations 00 Q Grommet (G) uiltin onetouch fitting (Station n) (Station ) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" (Light/surge voltage suppressor). 0.. (.9) 0 pprox. 00 L L ø.. 8. (DIN.).. (DIN 7.8) (, port) (DIN 8.) 7.. (DIN 7.8) (itch) = 9 (, port) L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO).8 pprox pprox Max.. pplicable cable O.D. ø. to ø7 89 g M8 x efer to back page for dimentions with connector cable. Station n L L Station Station 0 9

66 Series SYJ7000 Type : Top orted/ssyj7 Stations (00 )Q Grommet (G) uiltin onetouch fitting (Station n) (Station ) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, /" (Light/surge voltage suppressor) 8... (.9) pprox. 00 L L ø.... (DIN.) (DIN.) 7. (DIN.8) (DIN.8) / (, port) (itch) = 9. (, port) L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) pprox pprox Max.. pplicable cable O.D. ø. to ø g M8 x efer to back page for dimentions with connector cable. Station n L L Station Station 08 88

67 Series SYJ7000 Type 0: ottom orted/ssyj70 Stations 0 Q Grommet (G) 9 0 (itch) = 9. (, port) (Station n) (Station ) (Light/surge voltage suppressor) pprox L L ø (DIN.) 8.. (DIN.8). (DIN.). (DIN.8) / (, port) (itch) = 9. L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) pprox pprox Max. pplicable cable O.D. ø. to ø g7 7.7 M8 x efer to back page for dimentions with connector cable. Station n L L Station Station 08 88

68 Series SYJ7000 Type : Side orted/ssyj7 Stations 0 Q Grommet (G) (Light/surge voltage suppressor) (Station ) (Station n) pprox. 00. (itch) = L L (, port) (DIN.) 9 (DIN.) / (, port).8 (For DIN:.) 9 (itch) = ø. L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) M8 x pprox pprox Max... g7 pplicable cable O.D. ø. to ø efer to back page for dimentions with connector cable. Station n L L Station Station 8

69 Series SYJ7000 Type : Side orted/ssyj7 Stations Grommet (G) C,N7 C8,N9 Q (Station ) (Light/surge voltage suppressor) (Station n) pprox (DIN ) L 8 (itch) = 9 L Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" 9.9 ø..9 (DIN.) / (, port) (.9).9 (DIN:.) 9 (itch) = 9 L plug connector (L) M plug connector (M) DIN terminal (D) M8 connector (WO) pprox pprox Max... g pplicable cable O.D. ø. to ø M8 x efer to back page for dimentions with connector cable. Station n L L Station Station 9 9

70 Series SYJ7000 Flat ibbon Cable Manifold SSYJ7 Stations (00 )Q (Light/surge voltage suppressor) (Station n) (Station ) 8. pplicable connector: pins MIL type (Conforming to MILC80) pprox. 00 L L... (, port) ø / (, port) (Nonlocking) (itch) =.. Triangle mark For builtin onetouch fitting Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" (.9) Station n L L Station Station 7.. 7

71 / ort ir Operated Valve Series SYJ000 How to Order ody ported SYJ M racket Without bracket F With bracket ase mounted ( port) SYJ 0 (Manifold use only) ase mounted ( port) SYJ 0 JIS Symbol port port position single ()() position single ()() Type of actuation position single position double position closed center position exhaust center position pressure center ort size Without subplate M port M With subplate ()()() position double ()() ()()() position closed center ()() ()() position double ()() ()() position closed center ()() How to Order Manifold ase Same manifolds as series SYJ000 are prepared. SSYJ Fill the same as SSYJ ()()() position exhaust center position exhaust center ()() ()() ()()() position pressure center position pressure center () () ()() ()() ()() Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) SSYJM pc. SYJ pc. SYJ pc. SYJ000 pc. The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. ()()() ()() Caution efer to back page through to for Safety Instructions and Common recautions. 8

72 Series SYJ000 Specifications ase mounted ody ported Fluid Operating pressure range (Ma) Note ) ilot pressure range (Ma) position single position double position position single position double position mbient and fluid temperature ( C) Lubrication Mounting orientation to 0 (No freezing. efer to back page.) Not required Unrestricted Impact/Vibration resistance (m/s ) Note ) 00/0 Note ) In case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {()} for activation. Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state) ilot ressure ange (Single pilot) ir 0. to to to 0.7 Operating pressure to to to 0.7 With racket ilot pressure Ma ilot pressure range ir operated valve SYJ MF The mounting bracket for the position double solenoid and position is supplied unattached Operating pressure range Ma Flow Characteristics/Weight efer to the memo for changed contents. port ase mounted (with subplate) ody ported ort ase Mounted (For manifold) Note ) 9 Valve model Type of actuation ort size SYJ 0M SYJ M SYJ 0 position position position position position position Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center M M ilot port size M M M Weight (g) Grommet 8 () () (8) 8 8 Note ) Effective area mm 0.9 Flow characteristics Note ) / ( /) / / (/ E/E) C [dm / C [dm / b Cv Q[l/min(N)]* b Cv Q[l/min(N)]* (s bar)] (s bar)] [0.] [0.] 0. [0.080] 97 [8] 0.9 [0.0] 0. [0.] 0. [0.] [] 8 Note ) Value when used on a manifold. efer to page 9 for details. Note ) [ ]: denotes normal position. Note ) ( ): Without subplate. Note ) port, base mounted without subplate: SYJ 0 * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma.

73 Series SYJ000 Dimensions/ody orted position single: SYJM(F) Dimensions/ase Mounted position single: SYJM ø (leed port) M (iping port) 7 7 ø. (racket) (8.) () () () (.) (.) () M (ilot port) ø (leed port) M (iping port) ø. M (ilot port) position double: SYJM(F) position double: SYJM Manual override () (0.) ø. equivalent () (8.) M (ilot port) 7 7 (8.) ø (leed port) M (iping port) ø (leed port) M (iping port) ø. M (ilot port) ø.8 (For manifold mounting) position closed center/exhaust center/pressure center SYJ M(F) position closed center/exhaust center/pressure center SYJ 0M () (0.) () ø. equivalent (8.) M (ilot port) 7 7 ø (leed port) M (iping port) (8.) M (iping port) ø ø (leed port) M (ilot port)

74 / ort ir Operated Valve Series SYJ000 How to Order, port size M M C Onetouch fitting for ø C Onetouch fitting for ø racket Without bracket F With bracket ody ported SYJ M ase mounted SYJ 0 JIS Symbol ody ported position single ()() position double ()() Type of actuation position single position double position closed center position exhaust center position pressure center ort size Without subplate 0 With subplate Thread type F N T c G NT NTF ()()() position closed center ()() ()()() position exhaust center ()() How to Order Manifold ase ()()() position pressure center () () ()()() ase mounted position single ()() ()()() position double ()() Same manifolds as series SYJ000 are prepared. SSYJ Fill the same as SSYJ. Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. () () position closed center ()() () () position pressure center ()() (Ex.) position exhaust center SSYJ0 set () () SYJ set SYJ set SYJ000 set () () () () The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. () () 7 Caution efer to back page through to for Safety Instructions and Common recautions.

75 Series SYJ000 Specifications ase mounted Fluid Operating pressure range (Ma) Note ) ilot pressure range (Ma) position single position double position position single position double position mbient and fluid temperature ( C) Lubrication Mounting orientation Impact/Vibration resistance (m/s ) Note ) ilot ressure ange (Single pilot) ir 0. to to to 0.7 (0. x 0.) to 0.7 : Operating pressure 0. to to 0.7 to 0 (No freezing. efer to back page.) Not required Unrestricted 00/0 Note ) In case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {()} for activation. Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state) With racket ody ported ilot pressure Ma ilot pressure range ir operated valve SYJMF The mounting brcket is supplied unttached. 0. Flow Characteristics/Weight Operating pressure range Ma ody ported ase mounted (with subplate) Valve model Type of actuation ort size SYJ M SYJ C SYJ C SYJ 00 position position position position position position position position Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center M, port: C (Onetouch fitting for ø), port: M, port: C (Onetouch fitting for ø), port: M Flow characteristics Note ) / ( /) / / (/ E/E) C [dm / C [dm / (s bar)] b Cv Q[l/min(N)]* (s bar)] b Cv Q[l/min(N)]* [0.9] [0.] [0.] [0.9] [0.8] [0.] [] [0.] [0.7] [0.] [0.] [0.7] [0.] [9] [0.] [0.8] [0.] [0.] [0.9] [0.] [9] [0.7] [0.8] 0. [0.]. [0.0] [0.] [0.8] ilot port size M M Weight (g) () 9 (0) (70) Note ) [ ]: denotes normal position. Note ) ( ): Without subplate. Note ) Model No. for port base mounted style without subplate is SYJ 0. * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma. 7 7 [] [] [9] 9 8 [] 8 70 [8] 9 Note )

76 Series SYJ000 Dimensions/ody orted Dimensions/ase Mounted position single: SYJM(F) M (iping port) position single: SYJ0 Manual override. (8) () ø. (0) (7) (racket). 9. (.) (.) ø.8 (leed port) With fiflter (80 mesh). ø. ø.8 (leed port) With fiflter (80 mesh) M (ilot port) ø. (iping port) M (ilot port) ø. (For manifold mounting) 7. 7 position double: SYJM position double: SYJ0 M (iping port) Manual override. ø.8 (leed port) With fiflter (80 mesh). ø. M (ilot port) ø.8 (leed port) With fiflter (80 mesh) M (ilot port) ø. (iping port)... 9 ø. (For manifold mounting) 7. 7 position closed center/exhaust center/pressure center SYJ M M (iping port) position closed center/exhaust center/pressure center SYJ ø.8 (leed port) With fiflter (80 mesh). ø. M (ilot port) ø. (For manifold mounting) (iping port) ø.8 (leed port) With fiflter (80 mesh) M (ilot port) 7 7. ø

77 / ort ir Operated Valve Series SYJ7000 How to Order, port size 0 C Onetouch fitting for ø C8 Onetouch fitting for ø8 racket Without bracket F With bracket ody ported SYJ7 0 ase mounted SYJ7 0 JIS Symbol ody ported position single ()() position double ()() Type of actuation position single position double position closed center position exhaust center position pressure center ort size Without subplate 0 With subplate / 0 With subplate Thread type F N T c G NT NTF ()()() position closed center ()() () ()() position pressure center ()() () ()() ase mounted position single ()() ()()() position closed center () () ()()() position pressure center () () ()()() position exhaust center () () () ()() position double () () ()() position exhaust center ()() () () ()() How to Order Manifold ase Same manifolds as series SYJ7000 are prepared. SSYJ7 Fill the same as SSYJ7. Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Ex.) SSYJ70 pc. SYJ7 pc. SYJ7 pc. SYJ7000 pc. The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. () ()() Caution efer to back page through to for Safety Instructions and Common recautions. 7

78 Series SYJ7000 Specifications ase mounted Fluid Operating pressure range (Ma) Note ) ilot pressure range (Ma) position single position double position position single position double position mbient and fluid temperature ( C) Lubrication Mounting orientation Impact/Vibration resistance (m/s ) Note ) ir 0. to to to 0.7 (0. x 0.) to 0.7 : Operating pressure 0. to to 0.7 to 0 (No freezing. efer to back page.) Not required Unrestricted 00/0 Note ) In case of single type, be certain that pressure within operating pressure range be supplied to supply port, because return pressure is introduced from supply port {()} for activation. Note ) Impact resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle directions of the main valve, when pilot signal is ON and OFF. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve when pilot signal is ON and OFF. (Value in the initial state) ody ported ilot ressure ange (Single pilot) With racket ilot pressure Ma ilot pressure range ir operated valve SYJ70F s a bracket is designed for a body, be sure that a bracket is attached when ordering and operating Operating pressure range Ma 7

79 Series SYJ7000 Flow Characteristics/Weight ody ported ase mounted (with subplate) Valve model Type of actuation ort size / ( /) SYJ7 0 SYJ7 C SYJ7 C8 SYJ7 00 SYJ7 00 position position position position position position position position position position Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center, port: C (Onetouch fitting for ø), port:, port: C8 (Onetouch fitting for ø8), port: Note ) Note ) / Note ) Flow characteristics / / (/ E/E) C [dm / b Cv (s bar)] Q[l/min(N]* C [dm / b Cv (s bar)] [0.8]....8 [0.78] [0.8]..9.. [0.8]..9.. [0.8] ilot port size Note),, port: c is, port: c (T) / Note) [ ]: for nomal position Note) ( ): without subplate Note) Model No. for base mounted style without subplate is SYJ 0. * These values have been calculated according to ISO8 and represent the flow rate measured in standard conditions at an upstream of 0.Ma (relative pressure) and a differential pressure of 0.Ma [0.0] [0.] [0.0] [0.] [0.] [0.] [0.] [0.] [0.] [0.] [] [] [] [9] []..0.0 [.] [.]...0. [.] [.] [.] [0.] [0.9] [0.] [0.8] [0.9] [0.8] [0.7] [0.] [0.] [0.] Q[l/min(N]* 788 [89] [9] [79] [0] [] 0 M M M Note ) Weight (g) (90) 90 () 0 () 70 (90) 90 () 0 () 7

80 Series SYJ7000 Dimensions/ody orted Dimensions/ase Mounted position single: SYJ70 (F) (.9) (iping port) 0 position single: SYJ7 0,/ (,, port) Manual override ø. () () 8 () () (racket) 7. ø. (.8). (9.) ø.8 (leed port) With fiflter (80 mesh) ø.8 (leed port) With fiflter (80 mesh) M (ilot port).. ø. 7 / (, port) 8. 0 ø. (For manifold mounting) 7 M (ilot port) position double: SYJ70 position double: SYJ7 (iping port) 0 0 Manual override ø.8 (leed port) With fiflter (80 mesh) ø. 9 ø.8 (leed port) With fiflter (80 mesh) M (ilot port),/ (,, port) ø. 8.. / (, port) ø. (For manifold mounting) 7 M (ilot port).. 7. position closed center/exhaust center/pressure center SYJ7 0 ø.8 (leed port) With fiflter (80 mesh) position closed center/exhaust center/pressure center 0 SYJ7 0 0,/ (,, port) Manual override 8 ø. Manual override (iping port) 8 9 ø. (For manifold mounting) ø.8 (leed port) With fiflter (80 mesh) M (ilot port). / (, port) ø M (ilot port)

81 Series SYJ000/7000 Made to Order (For detailed specifications, delivery and pricing, please contact SMC.) ody orted External ilot pplicable solenoid valve series SYJ, SYJ7 SYJ 7 X Q Entry is the same as standard products. Operating ressure ange Ma Operating pressure range 0 ka to 0.7 ilot pressure range 0. to 0.7 Dimensions SYJ000: 8 mm longer in total length. SYJ7000: 8 mm External ilot ort Series SYJ000, SYJ7000 ort size M JIS Symbol ody ported position single position double position closed center position exhaust center position pressure center ()() ()() ()() ()() ()() ()()() ()()() ()()() ()()() ()()() X X X X X 78

82 How to Order Valve Series SYJ000/7000 Made to Order DIN Connector Conforming to EN7080C (former DIN 0C) DIN connector type that conforms to the 8 mm pitch standards between DIN terminals. Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center ated voltage DC Light/surge voltage suppressor S Z VDC VDC Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor YOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. C ( 0 /0 Hz) 0 VC 0 VC VC [ VC] VC [ VC], port size M 0 C C N N7 M (SYJ7000 only) Onetouch fitting for ø Onetouch fitting for ø Onetouch fitting for ø/" Onetouch fitting for ø/" racket Without bracket F With bracket Note) Do not remove the factory installed bracket from models with the bracket option. emoval of he bracket will cause the valve to leak. ody ported SYJ 0 Y M Q ase mounted SYJ 0 Y Q 7 Series SYJ000 SYJ7000 ody option 0: ilot valve individual exhaust for the pilot valve : Common exhaust type for main and pilot valve port, E port port, E port Electrical entry Y: With connector YO: Without connector ort size Without subplate 0 0 / SYJ000 SYJ7000 SYJ7000 Nonlocking push type D ushturn locking slotted type E ushturn locking lever type Thread type c F G N NT T NTF How to Order ilot Valve ssembly V ated voltage DC VDC VDC C ( 0 0 Hz) 0 VC 0 VC VC [ VC] VC [ VC] 79 Y Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor YOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry Y DIN With connector YO terminal Without connector DIN Connector art No. Without light SY08 With light ated voltage Voltage symbol No. VDC VN SY08 VDC VN SY08 0 VC 0 VN SY08 0 VC 0 VN SY08 VC ( VC) VN SY08 VC ( VC) VN SY08 Caution. Use caution in wiring because it won't meet the I (enclosure) standard if you use the other cord than prescribed heavyduty cord of size (ø. to ø7.). lso be sure to tighten the ground nut and holding screw with the prescribed torque range.tighten the ground nut and set screw within the specified range of torque. For how to use DIN terminal (wiring procedures, procedures for changing electrical entries, precautions, applicable cable, circuit diagram), refer to back page 8.. D type DIN connector with 9. mm pitch between terminals is not interchangeable.. DIN connector except D type has the N indication in the end of voltage symbol. In case of DIN connector without light, N is not indicated. lease refer to the name plate to distinguish.. Dimensions are completely the same as D type connector.. When exchanging the pilot valve assembly only, V D is interchangeable with V Y. Do not replace V (G, H, L, M, W) to V D/ Y (DIN terminal), and vice versa.

83 How to Order Valve Series SYJ000/000/7000 Made to Order M8 Connector Conforming to IEC097 M8 Connector type conforming to IEC097 standard. Type of actuation position single solenoid position double solenoid position closed centre position exhaust centre position pressure centre ated voltage DC V S Light/surge voltage suppressor S Z U VDC VDC VDC VDC VDC Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type), port size M M 0 C C N N7 M (SYJ000 only) M (SYJ7000 only) Onetouch fitting for Onetouch fitting for Onetouch fitting for /" Onetouch fitting for /" racket Without bracket F With bracket Note) Do not remove the factory installed bracket from models with the bracket option. emoval of he bracket will cause the valve to leak. ody ported SYJ 0 WO M Q ase mounted ( port) SYJ 0 WO Q ase mounted ( port) SYJ 0 WO Q (For SYJ000 manifold use only) 7 Series SYJ000 SYJ000 SYJ7000 ody option 0: ilot valve individual exhaust for the pilot valve : Common exhaust type for main and pilot valve Electrical entry WO: Without connector cable W: With connector cable (Length 0, m) W: With connector cable (Length 0, m) W: With connector cable (Length m) W: With connector cable (Length m) W7: With connector cable (Length m) ort size M Without subplate SYJ / SYJ000 SYJ7000 SYJ7000 Thread type c F G N NT T NTF Nonlocking push type D ushturn locking slotted type E ushturn locking lever type How to Order ilot Valve ssembly V ated voltage DC VDC VDC V VC S VC VC WO Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) Electrical entry WO Without connector cable W With connector cable Note: is for cable length. lease refer to specific roduct recautions. 80

84 Series SYJ Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO Note ), JIS 870 Note ) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life. Danger : In extreme conditions, there is a possible result of serious injury or loss of life. Note ) ISO : neumatic fluid powergeneral rules relating to systems. Note ) JIS 870: General ules for neumatic Equipment Warning. The compatibility of pneumatic equipment is the responsibility of the person who designs the pneumatic system or decides its specifications. Since the products specified here are used in various operating conditions, their compatibility for the specific pneumatic system must be based on specifications or after analysis and/or tests to meet your specific requirements. The expected performance and safety assurance will be the responsibility of the person who has determined the compatibility of the system. This person should continuously review the suitability of all items specified, referring to the latest catalogue information with a view to giving due consideration to any possibility of equipment failure when configuring a system.. Only trained personnel should operate pneumatically operated machinery and equipment. Compressed air can be dangerous if an operator is unfamiliar with it. ssembly, handling or repair of pneumatic systems should be performed by trained and experienced operators.. Do not service machinery/equipment or attempt to remove components until safety is confirmed.. Inspection and maintenance of machinery/equipment should only be performed once measures to prevent falling or runaway of the driver objects have been confirmed.. When equipment is to be removed, confirm the safety process as mentioned above. Cut the supply pressure for this equipment and exhaust all residual compressed air in the system.. efore machinery/equipment is restarted, take measures to prevent shootingout of cylinder piston rod, etc.. Contact SMC if the product is to be used in any of the following conditions:. Conditions and environments beyond the given specifications, or if product is used outdoors.. Installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles, medical equipment, food and beverages, recreation equipment, emergency stop circuits, clutch and brake circuits in press applications, or safety equipment.. n application which has the possibility of having negative effects on people, property, or animals, requiring special safety analysis. ack page

85 / ort Solenoid Valves/Common recautions e sure to read before handling. Warning Design. ctuator drive When an actuator, such as a cylinder, is to be driven using a valve, take appropriate measures to prevent potential danger caused by actuator operation.. Intermediate stopping When a position closed center valve is used to stop a cylinder at an intermediate position, accurate stopping of the piston in a predetermined position is not possible due to the compressibility of air. Furthermore, since valves and cylinders are not guaranteed for zero air leakage, it may not be possible to hold a stopped position for an extended length of time. Contact SMC if it is necessary to hold a stopped position for an extended time.. Effect of back pressure when using a manifold Use caution when valves are used on a manifold, as actuator malfunction due to backpressure may occur. In case of position closed exhaust center valve or single acting cylinder, take appropriate measures to prevent the malfunction using with individual EXH interface assembly or individual exhaust manifold.. Holding of pressure (including vacuum) Since valves are subject to air leakage, they cannot be used for applications such as holding pressure (including vacuum) in a pressure vessel.. Cannot be used as an emergency shut off valve, etc. The valves presented in this catalogue are not designed for safety applications such as an emergency shut off valve. If the valves are used in this type of system, other reliable safety assurance measures should also be adopted.. Maintenance space The installation should allow sufficient space for maintenance activities (removal of valve, etc.). 7. elease of residual pressure rovide a residual pressure release function for maintenance purpose. Especially in case of position closed center valve, ensure the release of residual pressure between valve and cylinder. 8. Vacuum applications When a valve is used for vacuum switching, etc., take measures against the suction of external dust or other contaminants from vacuum pads and exhaust ports, etc. Moreover, an external pilot type valve should be used in this case. Contact SMC in case of an internal pilot type or air operated valve, etc. 9. bout using the double solenoid type When using the double solenoid type for the first time, actuators may travel in an unexpected direction depending on the switching position of a valve. Implement countermeasures not to occur any danger by the actuator's operation.. Ventilation When a valve is used inside a sealed control panel, etc., provide ventilation to prevent a pressure increase caused by exhausted air inside the control panel or temperature rise caused by the heat generated by the valve. Warning Selection. Confirm the specification The products presented in this catalogue are designed only for use in compressed air systems (including vacuum). Do not operate at pressures or temperatures, etc., beyond the range of specifications, as this can cause damage or malfunction. (efer to specifications.) Contact SMC when using a fluid other than compressed air (including vacuum).. Extended periods of continuous energisation Continuous energisation of the valve for extended periods of time may have an adverse effect on the solenoid valve performance and the peripheral equipment due to temperature rises caused by the heat generation of the coil. Consult with SMC if valves will be continuously energised for extended periods of time or the energised period per day will be longer than the deenergised period. It is also possible to shorten the energisation period by using valves of the N.O. (normally open) type. When solenoid valves are mounted in a control panel, employ measures to radiate excess heat, so that temperatures remain within the valve specification range. Use special caution when three or more stations sequentially aligned on the manifold are continuously energised since this will cause a drastic temperature rise. (s for C specifications, since the applicable products are ready to provide separately, contact SMC.) Caution. Momentary energisation If a double solenoid valve will be operated with momentary energisation, it should be energised for at least 0. second. However, depending on the secondary load conditions, it should be energised until the cylinder reaches the stroke end position, as there is a possibility of malfunction otherwise.. Leakage voltage When using a resistor in parallel with the switching element or using a C element (surge voltage suppressor) for protection of the switching element, note that leakage voltage will increase due to leakage current flowing through the resistor or C element. Limit the amount of residual leakage voltage to the following value: ower supply With DC coil : % or less of rated voltage With C coil : 8% or less of rated voltage Switching element OFF C Leakage current Leakage voltage Valve ack page

86 / ort Solenoid Valves/Common recautions e sure to read before handling. Caution Selection. Solenoid valve drive for C with solid state output (SS, TIC output, etc.) ) Current leakage When using a snubber circuit (C element) for surge protection of the output element, a very small electric current will still continue to flow in spite of the OFF state. This results in the valve not returning. In the cases when exceeding the tolerance as shown above, take measures to install a bleeder resistor. ) Minimum load allowable amount (Min. load current) When the consumption current of a valve is less than the output element s minimum load allowable volume or the margin is small, the output element may not be switched normally. lease confirm SMC.. Surge voltage suppressor If a surge protection circuit contains nonordinary diodes such as Varistor, a residual voltage that is in proportion to the protective elements and the rated voltage will remain. Therefore, give consideration to surge voltage protection of the controller. In the case of diodes, the residual voltage is approximately V.. Use in low temperature environments Unless otherwise indicated in the specifications for each valve, operation is possible to C, but appropriate measures should be taken to avoid solidification or freezing of drainage and moisture, etc.. Operation for air blowing When using a solenoid valve for air blow, use an external pilot type. Take note that when internal pilots and external pilots are used on the same manifold, the pressure drop caused by the air blowing can have an effect on the internal pilot type valves. Moreover, when compressed air within the pressure range of the established specifications is supplied to the external pilot port, and a double solenoid valve is used for air blowing, the solenoids should normally be energised when air is being blown. 7. Mounting orientation ubber seal: efer to the specifications of each series. Warning Mounting. If air leakage increases or equipment does not operate properly, stop operation. Check mounting conditions when air and power supplies are connected. Initial function and leakage tests should be performed after installation.. Instruction manual Mount and operate the product after reading the manual carefully and understanding its contents. lso keep the manual where it can be referred to as necessary.. ainting and coating Warnings or specifications printed or pasted on the product should not be erased, removed or covered up. Consult with SMC if paint is to be applied to resinous parts, as this may have an adverse effect due to the paint solvent. Caution ort Direction. reparation before piping efore piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil and other debris from inside the pipe.. Wrapping of sealant tape When connecting pipes and fittings, etc., be sure that chips from the pipe thread and sealing materials do not get inside the valve. Furthermore, when pipe tape is used, leave. to thread ridges exposed at the end of the threads. Expose approx. threads Winding direction ipe tape. Closed center valves When using closed center type valves, carefully check to ascertain that there is no air leakage from the piping between the valves and cylinders.. Screwing in fittings When connecting fittings to valves, tighten as indicated below. ) For M and M type () When using SMC fittings, follow the guidelines below. fter tightening by hand, tighten an additional M: /, M: / turn with a tightening tool. However, if miniature fittings are used, tighten an additional / turn with a tightening tool after tightening by hand. For fittings with gaskets in locations, e.g., universal elbow or universal tee, tighten an additional / turn. Note) If fittings are overtightened, air leakage may result due to breaking of fitting threads or deformation of the gaskets. However, if fittings are not tightened sufficiently, loosening of the threads and air leakage and may occur. () When fittings other than SMC fittings are used, follow the instructions of the respective fitting manufacturer. ) For c (T) When installing fitting, etc., follow the given torque levels below. Tightening Torque for iping Connection threads pplicable tightening torque N m 7 to 9 / to /8 to / 8 to 0 / 8 to 0 to 8 / 0 to / 8 to 0 8 to 0. Connection of piping to products When connecting piping to a product, refer to its instruction manual to avoid mistakes regarding the supply port, etc. ack page

87 / ort Solenoid Valves/Common recautions e sure to read before handling. Caution. olarity When connecting power to a DC specification solenoid valve equipped with (indicator light) surge voltage suppressor, confirm whether or not there is polarity. If there is polarity, take note of the following points. Without builtin diode to protect polarity (including any power saving circuit): If a mistake is made regarding polarity, the diode in the valve, the control device switching element or power supply equipment, etc., may burn out. With diode to protect polarity: If a mistake is made regarding polarity, it will not be possible to switch the valve.. pplied voltage When electric power is connected to a solenoid valve, be careful to apply the proper voltage. Improper voltage may cause malfunction or coil damage.. Confirm the connections. fter completing the wiring, confirm that the connections are correct. Caution Wiring Lubrication. Lubrication [ubber seal] ) The valve has been lubricated for life at the factory, and does not require any further lubrication. ) In the event that it is lubricated, use class turbine oil (without additives), ISO VG. However, once lubrication is applied it must be continued, as loss of the original lubricant may lead to malfunction. Contact SMC regarding class turbine oil (with additives), ISO VG. ir Supply Warning. Use clean air. Do not use compressed air which contains chemicals, synthetic oils containing organic solvents, salts or corrosive gases, etc., as this can cause damage or malfunction. ir Supply Caution. Install air filters. Install air filters close to valves at their upstream side. filtration degree of μm or less should be selected.. Install an air dryer, after cooler or Drain Catch (water separator), etc. ir that includes excessive drainage may cause malfunction of valves and other pneumatic equipment. To prevent this, install an air dryer, aftercooler or Drain Catch (water separator), etc.. If excessive carbon dust is generated, eliminate it by installing mist separators at the upstream side of valves. If excessive carbon dust is generated by the compressor, it may adhere to the inside of valves and cause malfunction. efer to SMC est neumatics catalogue for compressed air quality. Warning Operating Environment.Do not use valves in atmospheres of corrosive gases, chemicals, salt water, water or steam or where there is direct contact with any of these.. roducts with I enclosures (based on IEC09) are protected against dust and water, however, these products cannot be used in water. Take measures to prevent water and dust from coming from the exhaust port.. roducts compliant to I satisfy the specifications by mounting each product properly. e sure to read the Specific roduct recautions for each product.. Do not use in an explosive atmosphere.. Do not use in locations subject to vibration or impact. Confirm the specifications in the main section of the catalogue.. protective cover, etc., should be used to shield valves from direct sunlight. 7. Shield valves from radiated heat generated by nearby heat sources. 8. Employ suitable protective measures in locations where there is contact with water droplets, oil or welding spatter, etc. 9. When solenoid valves are mounted in a control panel or are energised for extended periods of time, employ measures to radiate excess heat, so that temperatures remain within the valve specification range. ack page

88 / ort Solenoid Valves/Common recautions e sure to read before handling. Warning Maintenance. erform maintenance procedures as shown in the instruction manual. If handled improperly, malfunction or damage of machinery or equipment may occur.. Equipment removal and supply/exhaust of compressed air When equipment is removed, first confirm that measures are in place to prevent dropping of work pieces and runaway of equipment, etc. Then cut the supply pressure and power, and exhaust all compressed air from the system using its residual pressure release function. In the case of position closed center style, exhaust the residual pressure between valve and cylinder. When the equipment is to be started again after remounting or replacement, first confirm that measures are in place to prevent lurching of actuators, etc., and then confirm that the equipment is operating normally.. Low frequency operation Valves should be switched at least once every 0 days to prevent malfunction. (Use caution regarding the air supply.). operation When the manual override is operated, connected equipment will be actuated. Confirm safety before operating. Caution. Drain flushing emove drainage from air filters regularly. ack page

89 Series SYJ000/000/7000 Specific roduct recautions e sure to read before handling. efer to back page through to for Safety Instruction and Common recautions. Warning Manual Override Operation When the manual override is operated, connected equipment will be actuated. Confirm safety before operating. Nonlocking push type [Standard] ress in the direction of the arrow Solenoid Valve for 0 V, VC Specifications Warning Solenoid valves with DIN terminal connector C specifications have a builtin rectifier circuit in the pilot section to operate the DC coil. With 0 V, VC specification pilot valves, this builtin rectifier generates heat when energised. The surface may become hot depending on the energised condition; therefore, do not touch the solenoid valves. ushturn locking slotted type [Type D] While pressing, turn in the direction of the arrow. If it is not turned, it can be operated the same way as the nonlocking type. Caution Locked position When operating the locking type D with a screw driver, turn it gently using a watchmakers screw driver. [Torque: Less than 0. N.m] ushturn locking lever type [Type E] While pressing, turn in the direction of the arrow. If it is not turned, it can be operated the same way as the nonlocking type. Caution Locked position When locking the manual override on the pushturn locking types (D, E), be sure to push it down before turning. Turning without first pushing it down can cause damage to the manual override and trouble such as air leakage, etc. USH USH LOCK LOCK Common Exhaust Type for Main and ilot Valve lug position Type of actuation Number of solenoids Caution ilot air is exhausted through the main valve body rather than directly to atmosphere. Suitable for applications where exhausting the pilot valve to atmosphere would be detrimental to the surrounding working environment. For use in extremely dirty environments where there is the possibility that dust could enter the pilot exhaust and damage the valve. Ensure that the piping of exhaust air is not too restrictive. Series SYJ000/000/7000 Mixed Installation of ort and ort Valves on Same Manifold. Caution Series SYJ000/000/7000 and Series SYJ00/00/700 can be mounted on the same manifold. How to mount on the same manifold is shown on the following pages. SYJ000, SYJ00. SYJ000, SYJ00. 8 SYJ7000, SYJ700. If or port valve is used as a port valve Series SYJ000, 000, 7000 may be used as a N.C.or N.O. port valve by plugging one of the, ports. e sure not to plug the exhaust ports (). Can be used when a double solenoid, port valve is required. Single Double () port N.C. () () () () () () () () () (JIS symbols above: Series SYJ000) lug lug lug lug port N.O. () () () () () () () ()() () ack page

90 Series SYJ000/000/7000 Specific roduct recautions e sure to read before handling. efer to back page through to for Safety Instruction and Common recautions. Caution How to Use lug Connector. ttaching and detaching connectors To attach a connector, hold the lever and connector unit between your fingers and insert straight onto the pins of the solenoid valve so that the lever s pawl is pushed into the groove and locks. To detach a connector, remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. Cover Groove in Cover Groove. Crimping of lead wires and sockets Strip. to.7 mm at the end of the lead wires, insert the ends of the core wires evenly into the sockets, and then crimp with a crimping tool. When this is done, take care that the coverings of the lead wires do not enter the core wire crimping area. Use an exclusive crimping tool for crimping. (Contact SMC for special crimping tools.) in Connector Hook Lever DC polarity display Socket Lead wire lug Connector Lead Wire Length Caution Standard length is 00 mm, but the following lengths are also available. How to Order Connector ssembly For DC: SY0 0 Without lead wire: SY0 0 Lead wire (with connector and of sockets only) How to Order Include the connector assembly part number together with the part number for the plug connector s solenoid valve without connector. Ex.) In case of 00 mm of lead wire For DC SYJLOM SY00 length mm 00 mm 00 mm 0 mm 00 mm 0 mm 000 mm 000 mm Core wire crimping area Socket Hook Crimping area Core wire Lead wire Insulation 0. to 0. mm Max. Cover diameter: ø.7 mm. ttaching and detaching sockets with lead wires ttaching Insert the sockets into the square holes of the connector (, indication), and continue to push the sockets all the way in until they lock by hooking into the seats in the connector. (When they are pushed in, their hooks open and they are locked automatically.) Then confirm that they are locked by pulling lightly on the lead wires. Detaching To detach a socket from a connector, pull out the lead wire while pressing the socket s hook with a stick having a thin tip (approx. mm). If the socket will be used again, first spread the hook outward. Socket Connector Hook Lead wire ack page 7

91 Series SYJ000/000/7000 Specific roduct recautions e sure to read before handling. efer to back page through to for Safety Instruction and Common recautions. Caution <For DC> Grommet, L/M lug Connector Standard type (with polarity) Surge voltage suppressor ( S) ed () lack Surge Voltage Suppressor Diode to prevent reverse current Coil With light/surge voltage suppressor ( Z) Diode to prevent reverse current DIN Terminal With surge voltage suppressor (DS) Varistor Coil With light/surge voltage suppressor (DZ) ed () lack Nonpolar type With surge voltage suppressor ( ) ( ) () () ( ) Varistor With light/surge voltage suppressor ( U) ( ) () Varistor () ( ) Connect the standard type in accordance with the, polarity indication. (The nonpolar type can be used with the connections made either way.) Since voltage specifications other than standard V and VDC do not have diodes for polarity protection, be careful not to make errors in the polarity. lease use caution regarding the allowable voltage fluctuation because there is about a volt drop for a valve with polarity protection. (For details, refer to the solenoid specifications for the individual valve.) When wiring is done at the factory, positive () is red and negative ( ) is black. With power saving circuit ower consumption is decreased by / by reducing the wattage required to hold the valve in an energised state. (Effective energising time is over ms at VDC.) Operating rinciple With the above circuit, the current consumption when holding is reduced to save energy. lease refer to the electric wave data to the right. lease be careful not to reverse the polarity, since a diode to prevent the reversed current is not provided for the power saving circuit. lease use caution regarding the Electric circuit (with power saving circuit) LED lack ( ) : Starting current : Holding current (In the case of SYJ T, the electric 7 wave form of energy saving type) V 0 V 0. W 0. W 0 W pplied voltage ms Standard With power saving circuit allowable voltage fluctuation because there is about a 0. volt drop due to the transistor. (For details, refer to the solenoid specifications for the individual valve.) Timer circuit Diode Coil Coil Coil Coil ed () DIN terminal has no polarity. M8 Connector (Ground) () ( ) Solenoid valve side pin wiring diagram (For W type) () Solenoid valve side pin wiring diagram (For W type) (Ground) Solenoid valve side pin wiring () ( ) diagram (For W type) With light/surge voltage suppressor ( U) ( ) Solenoid valve side pin wiring diagram (For W type) Varistor Coil Standard type (with polarity) With light/surge voltage suppressor ( S) With light/surge voltage suppressor ( Z) Nonpolar type With surge voltage suppressor ( ) In the case of standard type, connect to and to for W type, and connect to and to for W type, according the polarity. For DC voltages other than V and V, incorrect wiring will case damage to the surge suppressor circuit. lease use caution regarding the allowable voltage fluctuation because there is about a volt drop for a valve with polarity protection. (For details, refer to the solenoid specifications for the individual valve.) () ( ) () ( ) ( ) () ( ) () () ( ) Varistor Varistor Diode to prevent reverse current Coil Diode to prevent reverse current Coil Coil Coil ack page 8

92 Series SYJ000/000/7000 Specific roduct recautions e sure to read before handling. efer to back page through to for Safety Instruction and Common recautions. Surge Voltage Suppressor <For C> (There is no S type because the generation of surge voltage is prevented by a rectifier.) DIN Terminal With light (DZ) ( ) ( ) Varistor Changing the entry direction fter separating the terminal block and housing, the cord entry can be changed by attaching the housing in the desired direction ( directions at 90 intervals). When equipped with a light, be careful not to damage the light with the cord s lead wires. Coil Note) Surge voltage suppressor of varistor has residual voltage corresponding to the protective element and rated voltage; therefore, protect the controller side from the surge. The residual voltage of the diode is approximately V. Caution Connection. Loosen the holding screw and pull the connector out of the solenoid valve terminal block.. fter removing the holding screw, insert a flat head screwdriver, etc. into the notch on the bottom of the terminal block and pry it open, separating the terminal block and the housing.. Loosen the terminal screws (slotted screws) on the terminal block, insert the cores of the lead wires into the terminals according to the connection method, and fasten them securely with the terminal screws.. Secure the cord by fastening the ground nut. Caution When making connections, take note that using other than the supported size (ø. to ø7) heavy duty cord will not satisfy I (enclosure) standards. lso, be sure to tighten the ground nut and holding screw within their specified torque ranges. Caution How to Use DIN Terminal NL: Neon light Ground nut tightening torque. to. N m Washer Caution Without light With light ated voltage VDC VDC 0 VC 0 VC VC VC Voltage symbol V V 0 V 0 V V V Circuit Diagram with Light How to Use DIN Terminal Grommet (ubber) (ating symbol) efer to table of DIN connector part no. below. Terminal screw ( locations) Tightening torque 0. to 0. N m C circuit NL : Neon light : esister DIN Connector art No. SY0 Set screw Tightening torque 0. N m Housing (Light mounting location) Terminal block Notch Model no. SY0 SY0 SY0 SY0 SY0 SY0 DC circuit LED : Light emitting diode : esister Note) efer to page 80 for DIN connector (Y) conforming to EN7080C (former DIN 0C). recautions lug in and pull out the connector vertically without tilting to one side. Compatible cable Cord O.D.: ø. to ø7 (eference) 0. mm, core or core, equivalent to JIS C 0 ack page 9

93 Series SYJ000/000/7000 Specific roduct recautions e sure to read before handling. efer to back page through to for Safety Instruction and Common recautions. Connector ssembly with Cover Caution Connector assembly with dust proof protective cover. Effective to prevention of short circuit failure due to the entry of foreign matter into the connector. Chloroprene rubber for electrical use, which provides outstanding weather resistance and electrical insulation, is used for the cover material. However, do not allow contact with cutting oil, etc. Simple and unencumbered appearance by adopting roundshaped cord. How to Order SY0 8 Lead wire length 00 mm 00 mm 00 mm 0 mm 00 mm 0 mm mm mm Connector ssembly with Cover: Dimensions (0) Gray Caution. M8 connector types have an I (enclosure) rating, offering protection from dust and water. However please note: these products are not intended for use in water. Select a SMC connector cable (V09 ) or a F sensor type connector, with M8 threaded pin specifications conforming to Nippon Electric Control Equipment ssociation Standard, NEC (IEC097). Make sure the connector O.D. is. mm or less when used with the Series SYJ000 manifold. If more than. mm, it cannot be mounted due to the size.. Do not use a tool to mount the connector, as this may cause damage. Only tighten by hand. (0. to 0. Nm). The excessive stress on the cable connector will not be able to satisfy the I rating. lease use caution and do not apply a stress of 0 N or greater. Connector cable mounting M8 Connector Caution Failure to meet I performance may result if using alternative connectors than those shown above, or when insufficiently tightened. Triangle mark rrow mark (.9) () ed lack (ø.) (8) (8) (.) L Note) Connector cable should be mounted in the correct direction. Make sure that the arrow symbol on the connector is facing the triangle symbol on the valve when using SMC connector cable (V09 ). e careful not to squeeze it in the wrong direction, as problems such as pin damage may occur. How to Order Enter the part number for a plug connector solenoid valve without connector together with the part number for a connector assembly with cover. Ex. ) Lead wire length of 00 mm SYJLOZMQ SY08 Ex. ) Lead wire length of 00 mm (standard) SYJLZMQ Symbol for connector assembly with cover In this case, the part number for the connector assembly with cover is not required. Connector cable M8 connector cable for M8 can be ordered as follows: How to Order. To order solenoid valve and connector cable at the same time. (Connector cable will be included in the shipment of the solenoid valve.) SYJ 7 Electrical entry W, W: Cable length 00 mm W, W: Cable length 00 mm W, W: Cable length 00 mm W, W: Cable length 00 mm W7, W7: Cable length 000 mm Ex. ) Cable length: 00 mm SYJWZEMQ Symbol for electrical entry Q ack page