Rubber seal 3 Port Pilot Solenoid Valve. Specifications. Fluid Operating pressure range MPa. Internal pilot

Transcription

1 ubber seal ort ilot Solenoid Valve Series SYJ00 Specifications efer to for details of products compatible with overseas standards. Body ported Base mounted Fluid Operating pressure range Ma Internal pilot ir 0. to 0. mbient and fluid temperature ( C) Note 1) esponse time ms (at 0. Ma) Max. operating frequency (Hz) (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure 10 to 0 (No freezing. efer to page 0.) or less Nonlocking push type, pushturn locking slotted type, pushturn locking lever type Individual exhaust for the pilot valve, common exhaust for the pilot and main valve Not required Unrestricted 0/0 Dust proof ( DIN terminal, M connector conforms to I.) Based on IEC Note 1) Based on dynamic performance test, JIS B. (Coil temperature C, at rated voltage, without surge voltage suppressor.) Note ) Impact resistance No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance No malfunction occurred in one sweep test between and 00 Hz. Test was performed to axis and right angle directions of the main valve and armature when pilot signal is ON and OFF. (Value in the initial state) Solenoid Specifications JIS Symbol Internal pilot SYJ1 SYJ () 1 ()() External pilot SYJ1 SYJ () 1 ()() Order Made () 1 () () () 1 () () Made to Order (For details, refer to pages through.) Electrical entry Coil rated voltage (V) ower consumption (W) pparent power (V) DC C DC C 0 /0 Hz llowable voltage fluctuation Standard With power saving circuit 100 V 0 V [1 V] 0 V V [ V] Surge voltage suppressor Indicator light Grommet (G), (H), L plug connector (L), M plug connector (M), DIN terminal (D), M connector (W), 1,,, 100, 0, 0, ±10% of rated voltage 0. (With light 0. (DIN terminal with light 0.)) 0.1 (With light only) 1. (With light 1.) 1. (With light 1.) [1. (With light 1.)]. (With light.). (With light.) [. (With light.)] Diode (DIN terminal, varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between 0 VC and 1 VC, and between VC and VC. For 1 VC and VC, the allowable voltage is % to % of rated voltage.

2 Flow Characteristics/Weight Valve model Body ported Base mounted (with subplate) SYJ1 SYJ SYJ1 SYJ Flow characteristics Type of ort 1 () () actuation size Grommet C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv N.C N.O N.C N.O () Note) Value for DC. dd 1 g for C. ( ) Without subplate. Weight (g) Note) L/M plug connector 1 () DIN terminal () M connector 1 (1) External ilot SYJ00 ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 100 ka) or low pressure line with 0. Ma or less. Specifications pplicable model Operating pressure range Ma Base mounted (SYJ1, SYJ) Main pressure 100 ka to 0. External pilot pressure 0. to 0., port port (External pilot) port Note 1) For manifold base, refer to page 1. Note ) External pilot type body ported valves (SYJ ) can only be used on the manifold. For body ported models with the external pilot option, please refer to page. 1

3 How to Order port (For manifold type, 1) ated voltage DC V S 1 Type of actuation 1 VDC 1 VDC VDC VDC VDC DC specifications of type D and DO is only available with 1 and VDC. C ( 0 /0 Hz) 100 VC 0 VC 0 VC [1 VC] VC [ VC] For type W, DC voltage is only available. Normally closed Normally open Light/surge voltage suppressor Electrical entry for G, H, L, W S Z U Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. Electrical entry for D Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Bracket Without bracket F With bracket Bracket is mounted. External pilot type is not available. Body ported Base mounted SYJ 1 M M SYJ 1 M 01 port For subplate style, manifold type 0, 0, 1, 1 Body option Coil specifications Standard With power saving circuit T (, 1 VDC only) ower saving circuit is not available in the case of D, DO, W type. Nonlocking push type D ushturn locking slotted type ort size Without subplate (With gasket and screws) E ushturn locking lever type 01 port With subplate Thread type F N T c G NT NTF Individual pilot exhaust style port, E port M Common exhaust for the pilot and main valve Electrical entry, 1,,, VDC/100, 0, 0, VC, 1 VDC/ 100, 0, 0, VC, 1,,, VDC Grommet L plug connector M plug connector DIN terminal M connector G Lead wire length 00 mm L With lead wire (Length 00 mm) M With lead wire (Length 00 mm) MN Without lead wire D With connector W0 Without connector cable port, E port External pilot style H Lead wire length 00 mm LN Without lead wire LO Without connector MO Without connector DO Without connector SYJ is only for manifold use. Note) When placing an order for body ported solenoid valve as a single unit, mounting bolt for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to catalog on page.) LN, MN type with sockets. DIN terminal Type Y conforming to DIN0C standard is also available. For details, refer to catalog on page. For connector cable of M connector, refer to page.

4 Construction N.C. () cf a e bd () N.O. () cf a e bd () 1 ()() 1 ()() h h 1 () () 1 () () Component parts No. 1 Description Body iston plate End cover iston Spool valve assembly Spool spring Material luminum diecasted esin luminum diecasted esin Stainless steel How to Order ilot Valve ssembly g Note White White White eplacement parts No. Description Subplate ilot valve No. SYJ001 V1(T) g Note Zinc diecasted How to Order Connector ssemby for L and M lug Connector V1 Coil specifications T V S 1 Standard DC specifications Standard C specifications With power saving circuit (, 1 VDC only) ower saving circuit is not available in the case of W type. V1 G ated voltage VDC 1 VDC VDC VDC VDC 100 VC 0/0 Hz 0 VC 0/0 Hz 0 VC 0/0 Hz [1 VC 0/0 Hz] VC 0/0 Hz [ VC 0/0 Hz] For type W, DC voltage is only available. D ated voltage VDC 1 VDC VC 0/0 Hz 0 VC 0/0 Hz 0 VC 0/0 Hz [1 VC 0/0 Hz] VC 0/0 Hz [ VC 0/0 Hz] DC specifications of type D and DO is only available with 1 and VDC. ower saving circuit is not available in the case of D or DO type. Light/surge voltage suppressor S Z U Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For and U, DC voltage is only available. ower saving circuit is only available in the "Z" type. G H L LN LO M MN MO W0 Electrical entry Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M connector Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry D DIN With connector DO terminal Without connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable For connector cable of M connector, refer to page. Do not replace V1 (G, H, L, M, W) to V1 (DIN terminal) and vice versa when replacing pilot valve assembly only. For DC For 100 VC For 0 VC For other voltages of C Without lead wire (with connector and of sockets only) How to Order M Connector Cable V1001 SY1000 SY10001 SY1000 SY1000 SY1000 Lead wire length 00 mm 00 mm mm 00 mm 00 mm 00 mm mm mm Cable length 1 00 mm 00 mm 1000 mm 00 mm 000 mm 1

5 Body orted [ ] for C Grommet (G), (H) SYJ G H M With bracket SYJ G H MF ( port).. [.].. G H pprox. 00 ø [.1] L plug connector (L) SYJ L M (F) M plug connector (M) SYJ M M (F) DIN terminal (D) SYJ D M (F) M connector (M0) SYJ W0 M (F).1 [.1] 1.. [.] g Max. 10 pplicable cable O.D. ø. to ø M x [.]. [.] ø. (For manifold mounting) ø. 1. (, port) 1..1 [.1] (Bracket).. [.]. ø1. (E port) efer to the page for dimensions with connector cable. 1

6 Base Mounted (With Subplate) [ ] for C Grommet (G), (H) SYJ G H 01 ( port) 1. ø. G H pprox [.] 1.. [.]. ( port) 1. (, port) L plug connector (L) SYJ L 01 M plug connector (M) SYJ M 01 DIN terminal (D) SYJ D 01 M connector (W0) SYJ W0 01. [.]. 0. [.].... pplicable cable O.D. ø. to ø M. 10 g.1. M x [.] [.] efer to the page for dimensions with connector cable.

7 Manifold Specifications Manifold Specifications For internal pilot Model For external pilot Manifold type (SU), (EH) Valve stations port Location orting specifications Direction, port ort size port Type Type 1 Valve Top 1 / Type 0 Type 0 Single base/b mount Common SU, common EH to stations Base Bottom 1 / 1 / Type 1 Type 1 Side 1 /, 1 /, C (Onetouch fitting for ø),,c (Onetouch fitting for ø) port Note) Note) Only for external pilot Flow Characteristics Body ported for internal pilot Base mounted for internal pilot Body ported for external pilot Base mounted for external pilot Manifold Type SSYJ Type SSYJ0M Type SSYJ001 Type SSYJ1M Type SSYJ101 Type SSYJ1C Type SSYJ1C Type SSYJ1 Type SSYJ0M Type SSYJ001 Type SSYJ1M Type SSYJ101 Type SSYJ1C Type SSYJ1C SYJ SYJ SYJ SYJ 1(), () port ort size Note) Value at manifold base mounted, position single operating () port C [dm /(s bar)] C C C C () b Flow characteristics Cv C [dm /(s bar)] () b Cv How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. (Example) SSYJ set (manifold base) SSYJ10C... 1 set (manifold base) SYJ1LZM... sets (valve) SYJ1G... sets (valve) SYJ set (blanking plate assembly) SYJ set (blanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. 1

8 Combinations of Solenoid Valve, Manifold Gasket and Manifold Base Blanking late ssembly Body ported (Type SYJ ()) Base mounted (Type SYJ ()) Model no. SYJ0010 ound head combination screw M. x, Matt nickel plated ound head combination screw M. x, Matt nickel plated Blanking plate SYJ0010 Manifold gasket SYJ00 Manifold gasket SYJ00 Manifold gasket DT0 pplicable base Subplate SSYJ0 SSYJ1 SSYJ0 SSYJ1 Model no. SYJ00101 Manifold base pplicable base SSYJ1 SSYJ Manifold base pplicable base Subplate SSYJ0 SSYJ1 SSYJ0 SSYJ1 Manifold base ound head combination screw M. x, Matt nickel plated Blanking plate SYJ0010 Manifold gasket SYJ00 pplicable base SSYJ SSYJ1 Caution Mounting screw tightening torques M. 0. N m Use caution to the assembly orientation for solenoid valves (blanking plate) and manifold gasket.

9 Manifold for Internal ilot Type Type Type 0 Type 1 Type 1 Type 0 port Manifold for External ilot Type How to Order SSYJ 0 0 pplicable solenoid valve SYJ1 M SYJ1M M SYJ M SYJM M pplicable blanking plate assembly SYJ00101 Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ0 0 M 0 Stations stations stations Stations stations stations pplicable solenoid valve SYJ1 SYJ1M SYJ SYJM pplicable blanking plate assembly SYJ0010 Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ1 0 C 0 Stations stations stations pplicable solenoid valve SYJ1 SYJ1M SYJ SYJM pplicable blanking plate assembly SYJ0010 Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ1 0 0 pplicable solenoid valve SYJ1 M SYJ M pplicable blanking plate assembly SYJ00101 Note) For more than stations, supply/exhaust air to/from both sides of and port How to Order SSYJ port size M 01 C C N N ø onetouch fitting ø onetouch fitting ø/" onetouch fitting ø1/" onetouch fitting ilot valve pressure is supplied separately from the main valve pressure through the use of a separate supply port. It can be used in the vacuum (up to 100 ka) or low pressure line with 0. Ma or less. port port port port, port port port port port,, C, C port (External pilot type) port port port port, port port (External pilot type) port port Stations stations stations Stations stations stations, port thread type c 00F G 00N NT 00T NTF port size M 01 port size M 01 Bracket Without bracket F With bracket, port thread type, port thread type 00F 00N 00T F N T c G NT NTF, port thread type F N T c G NT NTF c G NT NTF, port thread type F N T c G NT NTF pplicable solenoid valve SYJ1 SYJ pplicable blanking plate assembly SYJ0010 Type 1 port,, C, C port (External pilot type) port port Note) For more than stations, supply/exhaust air to/from both sides of and port How to Order SSYJ 1 0 M 0 Stations stations stations port size M 01 C ø onetouch fitting C ø onetouch fitting N ø/" onetouch fitting N ø1/" onetouch fitting, port thread type F N T c G NT NTF pplicable solenoid valve SYJ1 SYJ pplicable blanking plate assembly SYJ0010 Note) For more than stations, supply/exhaust air to/from both sides of and port

10 Series SYJ00 Type Manifold Top orted/ssyj Stations 00 (F) [ ] for C Grommet (G) (10) () (1.) L ø.. [0.]...1 [.] (DIN.) 1 ø. 0 ( port). (itch) 1. =1 (, port) (.). (Station 1) (Station n) 1. L M x 0. (Bracket mounting screw) L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0). [0.].. [1.] pplicable cable O.D. ø. to ø Max. 10 g... M x [.]. [.] efer to the page for dimensions with connector cable. Station n L L Station Station 1 0

11 Type 0 Manifold Bottom orted/ssyj0 Stations M, 01 [ ] for C Grommet (G) For M.1 [.] (DIN.) (itch) = ø (, port) For.1 [.] (DIN.) (itch) = ø. (Station n) (Station 1). (Station n) (Station 1)..1 [1.1] ( port) (itch) = ( port) (itch) = L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0) [.]. [.]..1. g [1.1]. [.] Max pplicable cable O.D. ø. to ø M x efer to the page for dimensions with connector cable. ort size M Station n Station Station 0 1 0

12 Type 1 Manifold Side orted/ssyj1 Stations C, N C, N [ ] for C Grommet (G).1 [.] (DIN.) (itch) =1 1. ø. (, port) (.). (Station n) (Station 1).1 [1.1].. Onetouch fitting ( port) pplicable tubing O.D. ø, ø/" (itch) =1. L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0) [.]. [.]..1 g [1.1]. [.] Max pplicable cable O.D. ø. to ø M x efer to the page for dimensions with connector cable. ort size Onetouch fitting Station n Station Station

13 Type 1 Manifold Side orted/ssyj1 Stations M, 01 [ ] for C Grommet (G) For M (itch) =1 1 For (itch) = 1.1 [.] (DIN.) 1. ø..1 [.] (DIN.) 1. ø. (Station n) (Station 1). (Station n) (Station 1)..1 [1.1]...1 [1.1].. ( port) (itch) =1 1.. ( port) (itch) = 1.. ort size M Station n Station Station 0 1 0

14 Series SYJ00 Type 1 Manifold Top orted (External ilot Type)/SSYJ1 Stations 00 [ ] for C Grommet (G) ( port).. L [.] (DIN.) 1. ø. ( port). (, port) (itch) =1. (Station n) (Station 1).1 [1.1].. L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0) [.]. [.] [1.1]. [.] Max g pplicable cable O.D. ø. to ø M x efer to the page for dimensions with connector cable. Station n L Station Station 0 1

15 Type 0 Manifold Bottom orted (External ilot Type)/SSYJ0 Stations M, 01 [ ] for C Grommet (G) For M.1 [.] ( port) (DIN.). L.. 1. ø. (For mounting) Manual (itch) override =1. (Station n) (Station 1) (, port) For.1 [.] ( port) (DIN.). L. (itch) = (Station n) (Station 1). 1. ø. (For mounting) Manual override..1 [1.1] ( port) (itch) = ( port) (itch) = L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0) [.]. [.]..1 g [1.1]. [.] Max pplicable cable O.D. ø. to ø M x efer to the page for dimensions with connector cable. ort size M Station n L L Station Station 0 1 0

16 Type 1 Manifold Side orted (External ilot Type)/SSYJ1 Stations C, N C, N [ ] for C Grommet (G).1 [.] ( port) (DIN.). L.. 1. ø (itch) =1 1. (, port) (.) (Station n) (Station 1).1 [1.1].. Onetouch fitting ( port) pplicable tubing O.D. ø,ø/" (itch) =1 1. L plug connector (L) M plug connector (M) DIN terminal (D) M connector (W0) [.]..1 [1.1]. [.].. [.].1 g Max pplicable cable O.D. ø. to ø.1. M x efer to the page for dimensions with connector cable. ort size Onetouch fitting Station n L Station Station 1 0

17 Type 1 Manifold Side orted (External ilot Type)/SSYJ1 Stations M, 01 [ ] for C For M For ( port) L. ( port) L..1 [.] (DIN.).. 1. ø..1 [.] (DIN.).. 1. ø. (Station n) (itch) =1 (Station 1) Manual override. (Station n) (itch) = (Station 1) Manual override..1 [1.1]...1 [1.1].. ( port) (itch) =1 1.. ( port) (itch) = 1.. ort size M Station n L L Station Station