4/5 Port Solenoid Valve

Transcription

1 ubber Seal / ort Solenoid Valve Series 000 / 000 / 000 [Option] SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M. to M. Cover (stainless steel) Flow Characteristics Series Flow characteristics C [(dm /s bar)] b Cv

2 Manifold Variations, port size Manifold option Manifold Variations M M ø Onetouch fittings ø ø8 ø/'' ø/'' ø/'' lanking plate Individual SU spacer Individual EXH spacer Interface regulator Individual wiring port body ported port body ported Type 0 Type Common SU/Common EXH style port base mounted port base mounted port base mounted port base mounted port base mounted port base mounted Type Type Type 0 Type Type Type ( regulation) ( regulation) ( regulation) ( regulation) Common SU/ Individual EXH style port base mounted Type

3 Manifold Variations, port size Manifold option Manifold Variations M M ø Onetouch fittings ø ø8 ø/'' ø/'' ø/'' lanking plate Individual SU spacer Individual EXH spacer Interface regulator Flat ibbon Cable port body ported Type SJ SY port body ported port base mounted Type Type SV SZ V S000 VQ port base mounted port base mounted Type Type VQ VQ VQC VQZ SQ VFS VF VQ

4 Manifold Variations, port size Manifold option Manifold Variations M M ø Onetouch fittings ø ø8 ø/'' ø/'' ø/'' lanking plate Individual SU spacer Individual EXH spacer Interface regulator EX0 Gateway System Serial Transmission System port body ported 8 0 Type 0S 000 port body ported port base mounted Type S Type S port base mounted port base mounted Type S Type S port base mounted Type S Manifold option port valve and / port valve mixed mounting Individual SU spacer assembly Individual EXH spacer assembly Interface regulator, port valve port valve efer to page for further information on Series 000, page 0 on Series 000 and page on Series 000.

5 ubber Seal / ort Solenoid Valve Series 000/000/000 Variations Series 000 Sonic conductance: C [dm /(s. bar)] Type of actuation Voltage For DC Electrical entry For DC Option With light/surge voltage suppressor Manual override SJ SY ody ported Effective area 0.9 mm / / {(/ E/E) } 0. / / {(/ E/E) }. / / {(/ E/E) } osition Single Double VDC VDC VDC VDC VDC Grommet L plug connector M plug connector With surge voltage suppressor With light/surge voltage suppressor SV SZ V S000 VQ VQ VQ VQC VQZ ase mounted / / {(/ E/E) } 0.8 / / {(/ E/E) } osition Closed center Exhaust center ressure center For C 0 00 VC / 0Hz 0 0 VC / 0Hz 0 00 VC / 0Hz 0 0 VC / 0Hz DIN terminal (000, 000 only) M8 connector For C Note) With light/surge voltage suppressor Nonlocking push type ushturn locking slotted type ushturn locking lever type SQ VFS VF VQ.9 / / {(/ E/E) }. 8 Note) ll C voltage models have builtin surge voltage suppressor.

6 ubber Seal / ort Solenoid Valve Series 000 Specifications [Option] position single ()() ()()() position double ()() ()()() position closed center ()() ()()() position exhaust center ()() ()()() position single () () ()() position double () () ()() position closed center () () ()() position exhaust center () () ()() position pressure center position pressure center ()() () () ()()() ody ported ase mounted JIS Symbol port port (manifold) ()() Fluid ir position single 0. to 0. Operating pressure range (Ma) position double 0. to 0. position 0. to 0. mbient and fluid temperature ( C) 0 to 0 (No freezing) Note ) esponse time (ms) (at 0. Ma) Max. operating frequency (Hz) position single, double position position single, double position or less 0 or less 0 (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted 0/0 Dust proof ( M8 connector conforms to I.) ased on IEC09 Note ) ased on dynamic performance test, JIS 898. (Coil temperature: 0 C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 000 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications Electrical entry Coil rated voltage (V) llowable voltage fluctuation ower consumption (W) pparent power (V) Surge voltage suppressor Diode (Nonpolarity type: Varistor) Indicator light LED In common between 0 VC and VC, and between 0 VC and 0 VC. For VC and 0 VC, the allowable voltage is % to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: % to 0%, VDC: % to 0% T type: VDC: 8% to 0%, VDC: % to 0% racket Mounting DC C 0 /0 Hz DC Standard With power saving circuit 00 V 0 V [ V] C 00 V 0 V [0 V] q Insert the lower hook of the mounting bracket into the groove on the bottom of the valve as shown. Grommet (G), (H), L plug connector (L), M plug connector (M), M8 connector (W),,,, 00, 0, 00, 0 ±0% of rated voltage 0. (With light: 0.) 0. (With light only) 0.8 (With light: 0.8) 0.8 (With light: 0.89) [0.9 (With light: 0.9)].8 (With light:.).0 (With light:.) [. (With light:.)] w ress the valve and mounting bracket together until the upper hook of the bracket snaps into place in the groove on top of the valve. Made to Order (For details, refer to page.) 8

7 ubber Seal / ort Solenoid Valve Series 000 Flow Characteristics/Mass Valve model port ase mounted (with subplate) port ody ported Note ) ort ase mounted (For manifold base only) Type of actuation Cylinder Speed Chart ort size,, (, E, E), Grommet (, ) () 9 () Single position Double Closed center position Exhaust center 8 () ressure center Single position Double Closed center M x 0. M x 0. position Exhaust center position position ressure center Single Double Closed center Exhaust center ressure center Note, ) Mass (g) L/M plug connector () 8 () 8 (8) Note ) Dedicated for manifold base. For details, refer to page 8. Note ) [ ] denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. Note ) For DC voltages. For C voltages add g to the weight of the single solenoid and g to the weight of the double solenoid and position types. ody orted Series 0M ase Mounted Series 0M verage speed (mm/s) verage speed (mm/s) Effective Note ) Flow characteristics M8 area / ( /) / / (/ E/E) connector (mm ) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv () 89 () () [0.0] 0. [0.] 0. [0.] 0.8 [0.] 0. [0.] 0. [0.080] Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. 0.9 ore size Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 erpendicular, upward actuation Horizontal actuation ore size Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 erpendicular, upward actuation Horizontal actuation Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ((Load weight x 9.8) /Theoretical force) x 00% SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Conditions ody ported Tubing bore x Length 0M Speed controller Silencer Series CJ Series CM ø x m S0F0 N0M ase mounted Tubing bore x Length 0M Speed controller Silencer Series CJ Series CM ø x m S00F0 S0F0 N0M 9

8 Series 000 How to Order Note) : For DC only. [Option] port (Type 0 Manifold) ody ported ase mounted ( port) ase mounted ( port) Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center ated voltage DC V S VDC VDC VDC VDC VDC Light/surge voltage suppressor S Z U 0 M M 0 M 0 M Without light/surge voltage suppressor With surge voltage suppresor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. C ( 0 /0 Hz) 00 VC 00 VC 0 VC [ VC] 0 VC [0 VC] For type W, DC voltage is only available. Note) : For DC only. racket : Without bracket F: With bracket Single Double rackets cannot be retrofitted. Note) The double solenoid mounting bracket is supplied unattached. To order the double solenoid bracket for use with a single solenoid valve, order the single solenoid valve without a bracket and order the bracket (VJ000 ) separately. (Example) 0MM VJ000 (Manifold use only) port For manifold type, S,, S port Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. ody option 0: ilot valve individual exhaust for the pilot valve : Common exhaust type for main and pilot valve : Nonlocking push type D: ushturn locking slotted type ort size : Without subplate (With gasket and screws) M: With M port subplate For subplate, manifold type, S,, S port, E port port, E port Electrical entry,,,, VDC 00,0, 00, 0 VC,,,, VDC Grommet L plug connector M plug connector G: Lead wire L: With lead wire M: With lead wire MN: Without length 00 mm (Length 00 mm) (Length 00 mm) lead wire M8 connector WO: Without connector cable E: ushturn locking lever type Q Note) : For DC only. H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector W : With connector cable Note ) 0 LN, MN type: with sockets. efer to page 9 for the lead wire length of L and M plug connectors. efer to page for the connector assembly with cover for L and M plug connectors. For connector cable of M8 connector, refer to page. M8 thread conforming to IEC09 standard is also available. efer to page for details. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page. Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page.)

9 ubber Seal / ort Solenoid Valve Series 000 Construction ()() position single position double ()() e t ()()() qrw ()()() wq t r () () () () position closed center/exhaust center/ressure center position closed center ()() ()()() position exhaust center () () ()()() position pressure center () () ()()() () Component arts No. () Description ody iston plate End cover iston Spool valve assembly () V G Material Zinc diecasted esin esin esin lminum, HN How to Order ilot Valve ssembly Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC 00 VC 0/0 Hz 00 VC 0/0 Hz 0 VC 0/0 Hz [ VC 0/0 Hz] 0 VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. Electrical entry G H L LN LO M MN MO WO W Note) Since V is CEcompliant as standard, the suffix "Q is not necessary. u w Note White White White Grommet, 00 mm lead wire Grommet, 00 mm lead wire t Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor U (Nonpolar type) L plug connector M plug connector M8 connector For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable q () () () () r () (This figure shows a closed center type.) eplacement arts No. Description Subplate Note) ilot valve With connector cable Note ) For connector cable of M8 connector, refer to page. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page. () u () () art no. 000 (Q) V (T) Note) dd suffix Q for the CEcompliant product. y u Note Zinc diecasted SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

10 Series 000 osition Single [ ]: C G Grommet (G), (H): 0 H M With bracket: G 0 MF H. [.] G: pprox. 00 H: pprox. 00 x ø.. M x 0. (, port) x ø.8 (For manifold mounting) 9.. [.]... 8 []. [.] 0 (racket) ø. (E port). M x 0. (, port) L plug connector (L): 0 L M (F) M plug connector (M): 0 M M (F) M8 connector (WO): 0 WO M (F) pprox []. M8 x. pprox [.]. [.] ().. [.] () 9.. ()..... efer to page for dimentions with connector cable.

11 ubber Seal / ort Solenoid Valve Series 000 osition Double [ ]: C G Grommet (G), (H): 0 H M (F) 8.8 [8.]...8 G: pprox. 00 H: pprox. 00 L plug connector (L): 0 L M (F) pprox [].. 8. (8.) M x 0. (, port) x ø. equivalent (8.) x ø.8 (For manifold mounting) racket ø. (E port) (, port) M plug connector (M): 0 M M (F) (.) pprox [.] 8 [] M8 connector (WO): 0 WO M (F) M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 98.[0] 9 [8.]... efer topage for dimentions with connector cable.

12 Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C Grommet (G), (H): 0 H M (F) G 9. [9.] 0. [.] G: pprox. 00 H: pprox (.) 8. M x 0. (, port) x ø.8 (For manifold mounting) x ø. equivalent (8.) racket (8.).. 8 [] 0 ø. (E port) M x 0. (, port) L plug connector (L): 0 L M (F) M plug connector (M): 0 M M (F) M8 connector (WO): 0 WO M (F) pprox []. M8 x. pprox [.]. [.9] 0. [.]. 9.9 [9.] 0. [.] efer to page for dimentions with connector cable.

13 ubber Seal / ort Solenoid Valve Series 000 osition Single [ ]: C Grommet (G), (H): 0 M G H (, port) L plug connector (L): 0 L M. [8.].. [8.] pprox. 00 G: pprox. 00 H: pprox [.] M plug connector (M): 0 M M. 8.. M8 connector (WO): 0 WO M [.] x ø.. [9.] (,, port) pprox. 00 M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ. [.] efer to page for dimentions with connector cable.

14 Series 000 osition Double [ ]: C Grommet (G), (H): 0 M G H (, port) 0 0 x ø [8.].. [8.]. G: pprox. 00 H: pprox (,, port) L plug connector (L): 0 L M M plug connector (M): 0 M M M8 connector (WO): 0 WO M. [8.]. pprox. 00 M8 x. [9.] pprox [8.] 8 98.[0] efer to page for dimentions with connector cable.

15 ubber Seal / ort Solenoid Valve Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C G Grommet (G), (H): 0 M H 0 (, port) L plug connector (L): 0 L M G: pprox. 00 H: pprox. 00. [8.].. [8.] pprox. 00 x ø.. M plug connector (M): 0 M M. [9.] [9.]... [9.] (,, port) pprox. 00 M8 connector (WO): 0() WO M 8. M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ [9.]. [.9] [9.8] 9.9 [9.] efer to page for dimentions with connector cable.

16 Series 000 Manifold Specifications [Option] Manifold Standard Manifold Specifications Model Type 0 Type, S Type, S Type, S Type, S Manifold type (SU), (EXH) Valve stations, port orting specifications ort size Location Direction, port, port Valve Top M x 0. Single base/ mount Common SU/Common EXH to 0 stations ase Side Common SU Individual EXH : :, C (Onetouch fitting for ø) Flow Characteristics ody ported for internal pilot Manifold Type SSYJ0 Type SSYJM Type SSYJC Type SSYJSM Type SSYJSC ase mounted Type SSYJM for internal pilot Type SSYJC Type SSYJSM Type SSYJSC Type SSYJM Type SSYJC Type SSYJSM Type SSYJSC ort size (), /() ort (), () ort M x 0. Type SSYJ S M x C C C C C C Note) Value at manifold base mounted, position single operating Flow characteristics / ( /) / / (/ ) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv Effective area (mm ) How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ00 set (Manifold base) SSYJS0C set (Manifold base) 0GM sets (Valve) 0LZ sets (Valve) 000 set (lanking plate assembly) 000 set (alnking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Use manifold specification sheet. 8

17 ubber Seal / ort Solenoid Valve Series 000 Flat ibbon Cable Manifold Note) : For DC only. [Option] Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. For DC For C Type How to Order Valve D E Type of actuation position single position double position closed center position exhaust center position pressure center ated voltage ated voltage 00 VC 0 VC ( VC) Nonlocking push type ushturn locking slotted type ushturn locking lever type VDC VDC Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port Location orting specifications Direction, port ort size, port pplicable flat ribbon cable connector Internal wiring ated voltage Note ) How to Order Manifold Light/surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Nonpolar type) Note) Z: ositive common specifications only. LO U LO Z, port size Symbol ort size ase mounted M M x 0. Note) In the case of flat ribbon cable type, U and Z types are for DC specifications and Z type is for C specifications. Z type for DC is positive common specification only. For the other combination, please contact SMC. Q Note) : For DC only. Type Type Single base/ mount Common SU, Common EXH to stations Valve ase Top Side M x 0., C (Onetouch fitting for ø) Socket: pins MIL type with strain relief (MILC80) In common between COM and COM (Z type: COM only), VDC/00, 0 VC Note ) The withstand voltage specification for the wiring unit section conforms to JIS C 00, Grade or its equivalent. Note ) : For DC only. Flow Characteristics Flow characteristics ort size / ( /) / / (/ ) Manifold (), /() (), () C C b Cv b Cv ort ort [dm /(s bar)] [dm /(s bar)] Type SSYJ M x 0. Type SSYJM Type SSYJC C Note) Value at manifold base mounted, position single operating ody ported for internal pilot ase mounted for internal pilot SSYJ0C (Q) pc. (Manifold base) 000 (Q) pc. (lanking plate assembly) LOU (Q) pcs. (Valve) SY0008 pcs. (Connector assembly) LOU (Q) pcs. (Valve) SY0009 pcs. (Connector assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Note) lease indicate the connector assembly part no. below that connects the valve and the manifold. Note) : For DC only. [Option] Connector ssembly For, VDC Single solenoid Double solenoid, position type For 00 VC Single solenoid Double solenoid, position type For 0 VC ( VC) Single solenoid Double solenoid, position type SY0008 SY0009 SY000 SY000 SY000 SY000 Effective area (mm ) SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

18 Series 000 EX0 Gateway System Serial Transmission System Manifold for EX0 Serial Wiring Specifications Model Manifold type (SU), (EXH) Valve stations, port Location orting specifications Direction, port ort size, port ated voltage Type S Type S Single base/ mount Common SU, Common EXH to stations Valve ase Top Side M x 0. VDC, C (Onetouch fitting for ø) Flow Characteristics Type S Manifold ody ported for internal pilot Type SSYJS ase mounted Type SSYJSM for internal pilot Type SSYJSC ort size (), /() (), () C ort ort [dm /(s bar)] M x C Note) Value at manifold base mounted, position single operating Flow characteristics / ( /) / / (/ ) b Cv C [dm /(s bar)] b Cv Effective area (mm ) 0.9 How to Order Manifold SSYJS0 set (Type S stations manifold part no.) LOUM sets (Single solenoid part no.) LOUM sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering. 0

19 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

20 EX0 Gateway System Serial Transmission System ody orted Manifold Series 000 [Option] How to Order Manifold SSYJ S 0 N SI unit NN output ( COM.) N output ( COM.) Q Symbol Station stations 8 stations stations stations Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.), port thread type c 00F G 00N NT 00T NTF SI unit part no. Symbol N SI unit specifications NN output ( COM.) N output ( COM.) SI unit part no. EX0S00 EX0S0 age. to efer to pages 9 to for the details of the EX0 gateway system serial transmission system. Type of actuation position single position double position closed center position exhaust center position pressure center How to Order Valve LO Z M ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) D E Nonlocking push type ushturn locking slotted type ushturn locking lever type, port size Q How to Order Manifold ssembly (Example) Example Stations Double solenoid ( VDC) LOUM(Q) ( sets) Single solenoid ( VDC) LOUM(Q) ( sets) Manifold base ( stations) SSYJS0(Q) SSYJS0 (Q) set (Type S station manifold part no.) LOUM (Q) sets (Single solenoid part no.) LOUM (Q) sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering.

21 EX0 Gateway System Serial Transmission System ase Mounted Manifold Series 000 [Option] SSYJ S Symbol Station Type of actuation position single position double position closed center position exhaust center position pressure center N stations 8 stations stations stations LO Z Example ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) D E SI unit NN output ( COM.) N output ( COM.) Nonlocking push type ushturn locking slotted type ushturn locking lever type How to Order Manifold Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) How to Order Valve Q 0 M, port thread type F N T c G NT NTF, port size M C Onetouch fitting for ø N Onetouch fitting for ø/ Double solenoid ( VDC) LOU(Q) ( sets) Single solenoid ( VDC) LOU(Q) ( sets) Manifold base ( stations) SSYJS0M(Q) SSYJS0M (Q) set (Type S station manifold part no.) LOU (Q) sets (Single solenoid part no.) LOU (Q) sets (Double solenoid part no.) Q SI unit part no. Symbol N SI unit specifications NN output ( COM.) N output ( COM.) SI unit part no. EX0S00 EX0S0 age. to efer to pages 9 to for the details of the EX0 gateway system serial transmission system. How to Order Manifold ssembly (Example) Stations The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering. SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

22 Series 000 Common SU/Common EXH Type 0 ( ort/ody ported), port M x 0. port port Note) : For DC only. [Option] Note) For more than 0 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ Number of stations 0 stations : : 0 0 stations 0 0 Q pplicable solenoid valve 0 M(Q) M(Q) pplicable blanking plate assembly efer to page. Type ( ort/ase mounted), port M x 0. Type Type S port port Single solenoid pilot valve is ( ) on same side as the, port., port M x 0. Type ( ort/ase mounted) Type, port, C port Type S Single solenoid pilot valve is ( on same side as the, port. ) port, port, C How to Order SSYJ 0 M Valve mounting direction Single solenoid pilot valve is on opposite side as the, port. port Single solenoid pilot valve is on S same side as the, port. port How to Order Stations 0 : 0 stations SSYJ 0 M Valve mounting direction Stations Single solenoid pilot valve is on opposite side as the, port. 0 stations S Single solenoid pilot valve is on : : same side as the, port. 0 0 stations port, port size port M C Onetouch fitting for ø N Onetouch fitting for ø/" : 0 stations Q, port thread type F N T pplicable solenoid valve 0 (Q) (Q) pplicable blanking plate assembly efer to page. Q c G NT NTF Type ( ort/ase mounted) port, port, C Type Type S Single solenoid pilot valve is on same side as the, port. ( ) port, port, C port How to Order SSYJ 0 C Valve mounting direction port Single solenoid pilot valve is on opposite side as the, port. Single solenoid pilot valve is on S same side as the, port. Common SU/Individual EXH Type ( ort/ase mounted), port, C Type Type S Single solenoid pilot valve is on same side as the, port. ( ), port port, port, C How to Order Stations 0 stations : : 0 0 stations, port size M C Onetouch fitting for ø N Onetouch fitting for ø/" Note) For more than 0 stations, supply air to both sides of port. SSYJ 0 M, port Stations Valve mounting direction 0 stations Single solenoid pilot valve is on opposite side as the, port. : : S Single solenoid pilot valve is on 0 0 stations same side as the, port., port size M port C N Onetouch fitting for ø Onetouch fitting for ø/", port thread type Q F N T c G NT NTF pplicable solenoid valve 0 (Q) (Q) pplicable blanking plate assembly efer to page. port thread type F N T c G NT NTF Q pplicable solenoid valve 0 (Q) (Q) pplicable blanking plate assembly efer to page.

23 Series 000 Flat ibbon Cable Manifold Note) : For DC only. [Option] Common SU/Common EXH Type ( port/ody ported) Type ( port/ase mounted) How to Order SSYJ 0 C Type S ( port/ody ported) SSYJ SSYJ 0 Stations 0 stations : : stations How to Order, port thread type c 00F G 00N NT 00T NTF, port size M C Onetouch fitting for ø N Onetouch fitting for ø/" EX0 gateway system serial transmission system, port M x 0., port M x 0. port, port, C port port port N port port Symbol 0 : 08 0 : Stations 0 stations : : stations SI unit NN output ( COM.) N output ( COM.) Station stations : 8 stations stations : stations How to Order S Valve stations Note, port thread type 0 The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) Note) For more than 0 stations, supply air to both sides of port and exhaust air from both sides of port. Double wiring Note ) Specified layout Note ) (Up to solenoids) F N T Q c G NT NTF, port thread type c 00F G 00N NT 00T NTF pplicable solenoid valve efer to page 9. pplicable connector assembly efer to page 9. pplicable blanking plate assembly efer to page. pplicable solenoid valve efer to page 9. pplicable connector assembly efer to page 9. pplicable blanking plate assembly efer to page. Q pplicable solenoid valve efer to page 0. pplicable blanking plate assembly efer to page. Q SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Type S ( port/ase mounted) SSYJ, port,c port port N Symbol 0 : 08 0 : How to Order SI unit NN output ( COM.) N output ( COM.) Station stations : 8 stations stations : stations S Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) 0 M, port thread type c F G N NT T NTF Q pplicable solenoid valve efer to page 0. pplicable blanking plate assembly efer to page., port size M C Onetouch fitting for ø N Onetouch fitting for ø/

24 Series 000 Mixed Installation of the 00 and the 000 Valves on the Same Manifold Series 00 valves can be mounted on the manifolds for Series 000. q SSYJ0, SSYJ The port valve can be used by simply sealing off the unused port with rubber plug 000. pplicable solenoid valves: Series, M,, M w SSYJ, S, SSYJ, S, SSYJ, S, SSYJ The port valve can be used without modification. The port of the valve will flow out of the port of the manifold. pplicable solenoid valves: Series, M,, M e SSYJ, S The port valve can be used on the port manifold by simply sealing off the unused port with rubber plug 000. The port of the valve will flow out of the port of the manifold. pplicable solenoid valves: Series, M,, M lug (000) Seal the unused port at the end the manifold. (00 port valve) (00 port valve) lug (000) Seal the unused port at the end the manifold. Caution Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. Type SSYJ0 Type SSYJ port of the port valve flows out of the manifold port. Combinations of Solenoid Valve, Manifold Gasket and Manifold ase port body ported (Type 0 (Q)) Mark Steel ball is driven in. ound head combination screw SY00 (M. x, Matt nickel plated) pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJS(Q) Manifold base Mark Manifold gasket 000 port base mounted (Type 0 (Q)) 0 Difference between and 0, ( port) 0, ( port) ound head combination screw SY00 (M. x, Matt nickel plated) pplicable manifold base Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Manifold base port base mounted (Type 0 (Q)) ound head combination screw SY00 (M. x, Matt nickel plated) pplicable manifold base Subplate Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Manifold base rotrusion for positioning Manifold gasket Manifold gasket Note) Make sure to align the manifold gasket with the groove of the valve body. 0 Configuration of surface is different.

25 Series 000 Combination of lanking late ssembly and Manifold ase lanking plate assembly 000(Q) ound head combination screw lanking plate assembly 000(Q) ound head combination screw Mark pplicable manifold base Type SSYJ0(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Type SSYJ(Q) Type SSYJS(Q) Type SSYJS(Q) Note) Manifold gasket 000 can be used with the following manifold bases. Manifold base of lanking plate Manifold gasket Manifold base Type SSYJ(Q) S(Q) (Q) S(Q) S(Q) Dust cap lanking plate pplicable manifold base SSYJ(Q) SSYJ(Q) Manifold base Caution Mark Manifold gasket Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

26 Series 000 Type 0 Manifold: Top orted/ssyj0 Stations [ ]: C Grommet (G) pprox. 00 (itch) = [9.]. [.9] x ø..9 [.] 8.8 [8.] 0 9 (, port) L L. M x 0. (, port) (Station n) (Station ) [9].. L plug connector (L) M plug connector (M) M8 connector (WO) pprox. 00 [9]. pprox. 00. [0.] M8 x 0.8. [.9] 98.[0].8 []. 9.9 [9.] 9 [8.] 0.8 [.] efer to page for dimentions with connector cable. Station n L L Station Station 0.. 8

27 Series 000 Type Manifold: Side orted/ssyj Stations M [ ]: C Grommet (G) 9. [9.] pprox. 00. [.] 0... (Station ). [0.] [.] 8.8 [8.]. L plug connector (L) M plug connector (M) M8 connector (WO). [.9] [0] L L (itch) = 0. (itch) = 0. (Station n). [.] M x 0. (, port) x ø. 9.9 [9.] [8.].. (, port) Type S Manifold: Side orted SSYJS Stations M 9. [9.]. [.] [.] M x 0. (, port) (Station n) M8 x (itch) = L L (itch) = 0. 9 (Station ) Single solenoid pilot valve is on same side as the, port [.] [8.] x ø. 9.9 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ pprox. 00. [.] pprox [.] efer to page for dimentions with connector cable. Station n L L Station Station 0.. 9

28 Series 000 Type Manifold: Side orted/ssyj Stations M, Grommet (G) For M 9. [9.] pprox. 00. [.].. L L (itch) = 0... x ø.. [.] 8.8 [8.] 0 (, port).. C N [ ]: C For C N (uiltin onetouch fitting) (Station ) (.) (Station n) L L (Station ) (Station n) 8. [.].. (itch) = 0. 0 (, port). 0 (itch) Onetouch fitting = 0. (, port) pplicable tubing O.D.: ø, ø/" L plug connector (L) M plug connector (M) M8 connector (WO). [.9] 98. [0] 0.8. [.] 9.9 [9.] [8.]. [.] M8 x pprox [.] pprox [.] efer to page for dimensions with connector cable. Type S Manifold: Side orted For M 9. [9.].. [9.] x ø. L L (itch) = 0. (Station n) [8.]. (Station ) Single solenoid pilot valve is on same side as the, port. 8.8 [8.] /SSYJS Stations M, C N For C (uiltin onetouch fitting) N 0.. (.) (Station n) (Station ) L L.. 0 (, port) (itch) = 0.. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) = SSYJ, S Stations M Station n L L SSYJ, S Stations C Station n L L 80 Station.. Station Station Station 0..

29 Series 000 Type Manifold: Side orted/ssyj Stations M, Grommet (G) For M. 8 0 ( port) For M [9.] pprox. 00. [.9].8 9. x ø. 8. [.].. 8. [.] L L (Station ) (itch) = (Station n) (itch) = [.] 8.8 [8.] (, port) ( port). C N [ ]: C For C N (uiltin onetouch fitting) (Station ) (.) (Station n) L plug connector (L) M plug connector (M) M8 connector (WO). [.9] 98.[0] pprox [] Type S Manifold: Side orted (itch) = [9.] 9 [8.] pprox [.] Single solenoid pilot valve is on same side as the, port. [.] M8 x ( port) (itch) Onetouch fitting = 0. (, port) pplicable tubing O.D.: ø, ø/" efer to page for dimentions with connector cable. C /SSYJS Stations M, N For C N (uiltin onetouch fitting) SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 9. [9.]. [.].. L L (Station n) (Station ) [8.]. [.] x ø. (Station n) 0.. (.) (Station ) ( port) 0 (, port) (itch) = 0. 0 Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) = 0. Station n L L Station Station

30 Series 000 Type Manifold: Side orted/ssyj Stations M, Grommet (G) For M pprox [9.] 0. [.9] (itch) = [.] 8.8 [8.] 0 9 ( port) C N [ ]: C For C N (uiltin onetouch fitting) ( port) (.) 8.8 (Station ) L L (Station n) x ø. (Station ) (Station n) 8. [.]...8 (itch) = 0. 0 (, port) 0..8 (itch) Onetouch fitting = 0. (, port) pplicable tubing O.D.: ø, ø/" L plug connector (L) M plug connector (M) M8 connector (WO) M8 x. 0.8 pprox. 00. [.9] 98. [0] 9.8 [] 9.9 [9.] 9 [8.] 0 [.] [.] pprox [.] Type S Manifold: Side orted For M (itch) = 0.. Single solenoid pilot valve is on same side as the, port. efer to page for dimentions with connector cable. C /SSYJS Stations M, N For C N (uiltin onetouch fitting) 9.9 [9.]. [.9] L L (Station n) (Station )..9 [.] 8.8 [8.] x ø (.) (Station n) (Station ) ( port) 0 (, port) (itch) = Onetouch fitting (itch) (, port) = 0. pplicable tubing O.D.: ø, ø/".. Station n L L 8 Station Station

31 Series 000 Flat ibbon Cable Manifold [ ]: C SSYJ Stations 00 L L.[.9].[.] L L 8.[.] [.] SSYJ Stations M, C C N For N (uiltin onetouch fitting) For M (, port) (Station n) (Station ) (itch) =. M x 0. (, port) x ø. (itch) = [0] Triangle mark pplicable connector: pins MIL type With strain relief (Conforming to MILC80) 0.. (, port). Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) = SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 0 0.[.9].[.]. 8.[.] 0 x ø. (itch) =. 8. (Station n) (Station )...[.] [0] Triangle mark.. (, port) pplicable connector: pins MIL type With strain relief (Conforming to MILC80).. (.) (, port) Station n L L Station Station.. 8

32 Series 000 EX0 Gateway System Serial Transmission System 000:SSYJS Stations L L (itch) =. 8. M x 0. (, port) x ø Output no. (Station n) (Station ) (, port) SI unit 8. 0 W 8 9 COM Connector lock pin (Take out when wiring the connector assembly.) Station n L L Station Station.. 8

33 Series 000 EX0 Gateway System Serial Transmission System 000:SSYJS Stations M, C N For C N (uiltin onetouch fitting) (, port) (itch) =. 9. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) = L L (itch) = (.). SI unit 8. SJ SY SV SZ. x ø. Output no... 0 (, port).. (, port) V S000 VQ VQ VQ VQC VQZ SQ VFS (Station n) (Station ) VF VQ W COM.9.. Connector lock pin (Take out when wiring the connector assembly.) Station n L L Station Station.. 8

34 ubber Seal ort Solenoid Valve Series 000 Specifications [Option] ody ported Fluid position single Operating pressure range (Ma) position double position mbient and fluid temperature ( C) esponse time (ms) Note ) (at 0. Ma) Max. operating frequency (Hz) (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s ) Enclosure ased on IEC09 position single, double position position single, double position Note ) ir 0. to to to 0. 0 to 0 (No freezing.) or less 0 or less Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted 0/0 Dust proof ( DIN terminal, M8 connector conforms to I.) Note ) ased on dynamic performance test, JIS 898. (Coil temperature: 0 C, at rated voltage, without surge voltage suppressor) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 000 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications JIS Symbol ody ported position single ()() ()()() position double ()() ()()() position closed center ()() ()()() position exhaust center ()() ()()() position pressure center Order Made 8 ()() ()()() ase mounted ase mounted (with subplate) position single ()() ()() position double ()() ()() position closed center ()() ()() position exhaust center ()() ()() position pressure center ()() ()() Made to Order (For details, refer to pages and.) Electrical entry Coil rated voltage (V) DC C 0/0 Hz llowable voltage fluctuation ower consumption (W) DC Standard With power saving circuit 00 V 0 V pparent power (V) [ V] C 00 V 0 V [0 V] JIS Symbol (Single) How to order valve with builtin speed controller Type of actuation ody Option ated voltage Lead wire () () ()() ort size CEcompliant Effective area (mm ) Light/surge voltage suppressor Grommet (G), (H), L plug connector (L) M plug connector: (M), DIN terminal (D, Y) M8 connector (W) G, H, L, M, W D, Y,,,,, 00, 0, 00, 0 ±0% of rated voltage 0. {With light: 0. (DIN terminal with light: 0.)} 0. (With light only) 0.8 (With light: 0.8) 0.8 (With light: 0.89) [0.9 (With light: 0.9)].8 (With light:.).0 (With light:.) [. (With light:.)] [.9 (With light:.0)] Surge voltage suppressor Diode (DIN terminal, Varistor when nonpolar types) Indicator light LED (Neon light when C with DIN terminal) In common between 0 VC and VC, and between 0 VC and 0 VC. For VC and 0 VC, the allowable voltage is % to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: % to 0%, VDC: % to 0% T type: VDC: 8% to 0%, VDC: % to 0% uiltin Speed Controller uiltin exhaust flow controls enable simple cylinder speed adjustments. When mounted on the manifold, the common exhaust discharges the pilot and main valve exhaust through a common EXH port to enable simple exhausting. 0 (Fully (Fully closed) open) When using model the speed controller must be opend more than complete rotation from fully closed in order to function proerly. djust the speed controller with a torque of 0. N m or less. late fixing screw Note) Do not loosen plate fixing screw. 0.8 (With light: 0.8) 0.8 (With light: 0.9) [0.9 (With light:.0)]. (With light:.0). (With light:.) Throttle Valve Characteristics ( )

35 ubber Seal ort Solenoid Valve Series 000 Flow Characteristics/Mass ody ported ase mounted Valve model 0 M position 0 C position 0 C position 0 0 ody orted Series 0M Series 00 verage speed (mm/s) ase Mounted Type of actuation position position position position position verage speed (mm/s) Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center ort size Note ) Flow characteristics,,, / (/) // (/E/E) (, E, E) (, ) C [dm /(s bar)] 0. b 0. Cv 0. C [dm /(s bar)] 0. b 0. Cv [0.9] 0. [0.] 0. [0.0] 0.9 [0.9] 0. [0.8] 0. [0.0] ore size Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm 0.9 C (Onetouch 0.9 fitting for ø) [0.] C (Onetouch fitting for ø) [0.] 0. [0.9] 0. [0.] [0.] 0.9 [0.8] 0. [0.] erpendicular, upward actuation Horizontal actuation ore size Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm Series M, C ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 ø0 ø0 ø ø80 ø Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ( (Load weight x 9.8) /Theoretical force) x 00% [0.] [0.0] [0.] [0.] [0.0] [0.] [0.8] [0.] [0.] [0.] [0.8] 0.8 Grommet (9) 98 () 09 () L/M plug connector () 00 () () Note, ) Mass (g) DIN terminal (8) (08) (9) Note ) [ ]: denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. Note ) For DC voltages. For C voltages add g to the weight of the single solenoid and g to the weight of the double solenoid and position types. Cylinder Speed Chart Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. M8 connector erpendicular, upward actuation Horizontal actuation SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Conditions 0M ody ported Tubing bore x Length Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m ø8 x m S0F0 S0F0 S0F08 N0M N00 ase mounted Tubing bore x Length 00 Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m S0F0 S00F0 N00 N00 8

36 Series 000 Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center (For manifold type 0) ated voltage DC V S ody ported 0 L ase mounted 0 S Z U VDC VDC VDC VDC VDC DC specifications of type D, Y, DO and YO are only available with and VDC. How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M, W Without light/surge voltage suppressor With surge voltage suppresor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. C ( 0 /0 Hz) 00 VC 00 VC 0 VC [ VC] 0 VC [0 VC] For type W, DC voltage is only available. Note) Ctype models that are have DIN terminals only. L Note) Ctype models that are have DIN terminals only. M Electrical entry for D, Y S Z, port size M C Onetouch fitting for ø C Onetouch fitting for ø N Onetouch fitting for ø/" N Onetouch fitting for ø/" racket : Without bracket F: With bracket [Option] Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Note) The mounting bracket is supplied unattached. Made to Order ody orted X0 External ilot (efer to page.) For subplate, manifold type 0,,, ody option,,,, VDC 00,0, 00, 0 VC Grommet L plug connector M plug connector G: Lead wire length 00 mm 0: ilot valve individual exhaust for the pilot valve port L: With lead wire (Length 00 mm), E port : Common exhaust type for main and pilot valve port, E port M: With lead wire MN: Without (Length 00 mm) lead wire Coil specifications Standard With power saving circuit T <, VDC only> ower saving circuit is not available in the case of D, Y, DO, YO or W type., VDC 00,0, 00, 0 VC DIN terminal Electrical entry,,,, VDC M8 connector D, Y : With connector WO: Without connector cable : Nonlocking push type D: ushturn locking slotted type Thread type c F G N NT T NTF Q Note) Ctype models that are CE compliant have DIN terminals only. ort size : Without subplate (With gasket and screws) E: ushturn locking lever type 0: With subplate H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO, YO: Without connector W : With connector cable Note ) CE DC compliant C 88 LN, MN type: with sockets. efer to page 9 for the lead wire length of L and M plug connectors. efer to page for the connector assembly with cover for L and M plug connectors. DIN terminal type Y which conforms to EN080C (former DINC) is also available. For details, refer to page. For connector cable of M8 connector, refer to page. M8 thread conforming to IEC09 standard is also available. efer to page for details. Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page 0.) Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page.

37 ubber Seal ort Solenoid Valve Series 000 Construction position single () () position double () () () () () () () () () () () () e qy trw wq t r () () () position closed center/exhaust center/pressure center position closed center () () () ()() position exhaust center () () () ()() position pressure center () () () ()() Component arts No. Description Material ody luminum diecasted iston plate esin End cover esin iston esin Spool valve assembly luminum, HN Spool spring Stainless steel i t q () () () () () rw (This figure shows a closed center type.) Note White White White () eplacement arts i () () No. 8 Description Subplate Note) ilot valve racket assembly art no. 000 (Q) V(T) 000 Note) dd suffix Q for the CEcompliant product. u i Note luminum diecasted SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 89

38 Series 000 How to Order ilot Valve ssembly V G Coil specifications Standard T With power saving circuit (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC 00 VC 0/0 Hz 00 VC 0/0 Hz 0 VC 0/0 Hz [ VC 0/0 Hz] 0 VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. Electrical entry G H L LN LO M MN MO WO W Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M8 connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note ) For connector cable of M8 connector, refer to page. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page. V ated voltage VDC VDC 00 VC 0/0 Hz D 00 VC 0/0 Hz 0 VC 0/0 Hz [ VC 0/0 Hz] 0 VC 0/0 Hz [0 VC 0/0 Hz] DC specifications of type D and DO is only available with and VDC. ower saving circuit is not available in the case of D or DO type. D DO Y DO Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppressor (Nonpolar type) Z With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Electrical entry DIN terminal (Type D) With connector Without connector DIN terminal With connector (Type Y) Without connector Note) Do not replace V (G, H, L, M, W) to V (DIN terminal) and vice versa when replacing pilot valve assembly only. Note) Since V and V are CEcompliant as standard, the suffix Q is not necessary. 90

39 . [.] ubber Seal ort Solenoid Valve Series 000 osition Single [ ]: C G Grommet (G), (H): 0 M H G: pprox. 00 H: pprox. 00 With bracket G 0 MF H x ø. 0. x M x 0. (Mounting screw) 0 (, port) 9 x ø. (For manifold mounting) 0. (,, port) L plug connector (L): 0 L M(F) pprox [.] pprox. 00 x ø. ø. (E port) M plug connector (M): 0 M M(F) 9. [.]. 8. [.] (.) DIN terminal (D, Y): D 0 M(F) Max. 0 g Y pplicable cable O.D. ø. to ø (racket) (.) 9.. [.]. uiltin onetouch fitting: G C, N 0 (F) H C, N. [.] Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/" M8 connector (WO): 0 WO M(F) M8 x.. SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ [.] (.) 0 9. x ø.. [.] 8. (.) x ø.. (.) x ø... (.) 0 9. x ø. efer to page for dimentions with connector cable. 9

40 Series 000 osition Double [ ]: C Grommet (G), (H): 0 M G H uiltin onetouch fitting: G C, N 0 H C, N 8. [9.] G: pprox. 00 H: pprox. 00. (, port) 0 9 x ø. (For manifold mounting) 0. 0 (.). Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/" x ø.. 8. [.] (,, port) ø. (E port) L plug connector (L): 0 L M M plug connector (M): 0 M M DIN terminal (D, Y): D 0 M Y M8 connector (WO): 0 WO M pprox [.]. pprox [.] g Max. 0 pplicable cable O.D. ø. to ø M8 x.. 0 [.] 0 x ø. 8. [9.8]. 0 x ø x ø. x ø. efer to page for dimentions with connector cable. 9

41 ubber Seal ort Solenoid Valve Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C Grommet (G), (H): G 0 H M uiltin onetouch fitting: C, N 0 G H C, N 0. [0.]. [.].9. G: pprox. 00 H: pprox [.] L plug connector (L): 0 L M pprox. 00 [.]. [.] 0. (, port) (,, port) 8. [.] x ø M plug connector (M): 0 M M x ø. (For manifold mounting) x ø. pprox [0.8]. [.] ø. (E port) 9. [.] [.] (.). DIN terminal (D, Y): 0 M g x ø. Max. 0.. pplicable cable O.D. ø. to ø D Y x ø. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø, ø/" M8 connector (WO): 0 WO M. M8 x x ø. SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ efer to page for dimentions with connector cable. 9

42 Series 000 osition Single [ ]: C Grommet (G), (H): 0 0 G H uiltin speed controller: G 0 0 H (, port) Max.. 8. x ø.. With interface regulator G: pprox. 00 H: pprox [.8] 0. [09.] 0. [.] [.].. (, port)..9 L plug connector (L): 0 L 0 M plug connector (M): 0 M 0 DIN terminal (D, Y): D 0 0 Y M8 connector (WO): 0 WO [.]. 0. pprox. 00. [.].. [8.] pprox [.9] 8. pplicable cable O.D. ø. to ø Max g M8 x efer to page for dimentions with connector cable. 9

43 ubber Seal ort Solenoid Valve Series 000 osition Double [ ]: C G Grommet (G), (H): 0 0 H uiltin speed controller: G 0 0 H (, port). 8. Max [.].. L plug connector (L): 0 L 0 0. [.] G: pprox. 00 H: pprox. 00 pprox. 00 x ø.. (, port) M plug connector (M): 0 M 0. [8.] 8. [9.]. [.8] pprox [.]. DIN terminal (D, Y): D 0 0 Y pplicable cable O.D. ø. to ø With interface regulator Max. 0 g 0. [09.]...9. M8 connector (WO): 0 WO 0 M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ [.] 0 [.] [.9] 8. [9.8] efer to page for dimentions with connector cable. 9

44 Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C Grommet (G), (H): 0 0 G H uiltin speed controller: 0 0 G H (, port). Max x ø.. G: pprox. 00 H: pprox [.] 0. [0.] With interface regulator 08. [0.] 0. [.] [.] (, port) 8..9 L plug connector (L): 0 L 0 0. [.]. pprox. 00 M plug connector (M): 0 M 0. [8.] pprox. 00 DIN terminal (D, Y): D 0 0 Y pplicable cable O.D. ø. to ø Max. 0 g M8 connector (WO): 0 WO 0.. M8 x [.] [.] [.] 0. [0.8] efer to page for dimentions with connector cable. 9

45 Series 000 Manifold Specifications [Option] Manifold Standard Manifold Specifications Manifold type (SU), (EXH) Model Valve stations, port orting specifications ort size Flow Characteristics ody ported for internal pilot Manifold Location Direction, port, port Type SSYJ0 / / How to Order Manifold (Example) Type 0 Type 0 Type Type Type Valve Top, C (Onetouch fitting for ø) C (Onetouch fitting for ø) ort size (), /() ort (), () ort C C C C Single base/ mount Common SU, Common EXH to 0 stations ase ottom Type SSYJ0 Type SSYJ ase mounted Type SSYJ0 for internal pilot Type SSYJC Type SSYJ Note) Value at manifold base mounted, position single operating ase Side /, C (Onetouch fitting for ø) C [dm /(s bar)] C (Onetouch fitting for ø) Flow characteristics / ( /) / / (/ ) C b Cv b Cv [dm /(s bar)] Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ00 pc. (Manifold base) 0GM pcs. (Valve) 000 pc. (lanking plate assembly) SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ SSYJ0C pc. (Manifold base) 0LZ pc. (Valve) 0LZ pc. (Valve) 000 pc. (lanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Use manifold specification sheet. 9

46 Series 000 Flat ibbon Cable Manifold Note) : For DC only. [Option] Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port orting specifications ort size pplicable flat ribbon cable connector Internal wiring ated voltage Note ) Type 0 Type Type Single base/ mount Common SU, Common EXH to stations Location Direction, port Valve Top ase Side, port, C C (Onetouch fitting for ø) C (Onetouch fitting for ø) (Onetouch fitting for ø) Socket: pins MIL type with strain relief (MILC80) In common between COM and COM (Z type: COM only)., VDC/00, 0 VC Note ) The withstand voltage specification for the wiring unit section conforms to JIS C 00, Grade or its equivalent. Note ) CEcompliant: For DC only. Flow Characteristics ort size Manifold (), /() (), () C b ort ort [dm /(s bar)] ody ported Type SSYJ0 for internal pilot C C ase mounted Type SSYJ for internal pilot Type SSYJ C Note) Value at manifold base mounted, position single operating Flow characteristics / ( /) / / (/ ) Cv C [dm /(s bar)] b Cv How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ0C (Q) pc. (Manifold base) LOU (Q) pcs. (Valve) LOU (Q) pcs. (Valve) 000 pc. (lanking plate assembly) SY0008 pcs. (Connector assembly) SY0009 pcs. (Connector assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Note) lease indicate the connector assembly part no. below that connects the valve and the manifold. How to Order Valve For DC For C 98 ated voltage Type of actuation position single position double position closed center position exhaust center position pressure center ated voltage D E VDC VDC 00 VC 0 VC ( VC) Note) : For DC only. Light/surge voltage suppressor Z With light/surge voltage suppressor U With light/surge voltage suppressor (Nonpolar type) Note) Z: ositive common specifications only. Nonlocking push type ushturn locking slotted type ushturn locking lever type LO Z LOZ Symbol M C C N N [Option] Q Note) : For DC only., port size ort size ase mounted Onetouch fitting for ø Onetouch fitting for ø Onetouch fitting for ø/" Onetouch fitting for ø/" Note) In the case of flat ribbon cable type, U and Z types are for DC specifications and Z type is for C specifications. Z type for DC is positive common specification only. For the other combination, please contact SMC. Connector ssembly 0 For, VDC Single solenoid SY0008 Double solenoid, position type SY0009 Single solenoid With individual EXH spacer assembly SY000 Double solenoid, position type With individual EXH spacer assembly With port adaptor plate For 00 VC Single solenoid Double solenoid, position type Single solenoid With individual EXH spacer assembly Double solenoid, position type With individual EXH spacer assembly With port adaptor plate For 0 VC Single solenoid Double solenoid, position type Single solenoid With individual EXH spacer assembly Double solenoid, position type With individual EXH spacer assembly With port adaptor plate SY000 SY000 SY000 SY000 SY000 SY000 SY000 SY000 SY000 SY000 SY000 SY000

47 ubber Seal ort Solenoid Valve Series 000 EX0 Gateway System Serial Transmission System Manifold for EX0 Serial Wiring Specifications Type 0S For, VDC Single solenoid SY0008 Double solenoid, position type SY0009 Single solenoid With individual SU/EXH spacer assembly SY000 Double solenoid, position type With individual SU/EXH spacer assembly SY000 Single solenoid With interface regulator Double solenoid, position type With interface regulator With port adaptor plate SY000 SY000 SY000 Model Type 0S Manifold type (SU), (EXH) Valve stations, port Location Valve orting specifications Direction Top, port ort size, port C(Onetouch fitting for ø) C(Onetouch fitting for ø) ated voltage Flow Characteristics How to Order Manifold (Example) Type S Type S Single base/ mount Common SU, Common EXH to stations ase Side VDC SSYJ0S0 set (Type 0S stations manifold part no.) LOUM sets (Single solenoid part no.) LOUM sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Type S / C (Onetouch fitting for ø) Flow characteristics ort size /( /) / /(/ ) Manifold (), /() (), () C C b Cv b Cv ort ort [dm /(s bar)] [dm /(s bar)] ody ported Type SSYJ0S C for internal pilot C Type SSYJS ase mounted Type SSYJS0 / for internal pilot Type SSYJS C Note) Value at manifold base mounted, position single operating. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering. For 00 VC Single solenoid SY000 Double solenoid, position type SY000 Single solenoid With individual SU/EXH spacer assembly SY000 Double solenoid, position type With individual SU/EXH spacer assembly SY000 Single solenoid With interface regulator SY000 Double solenoid, position type With interface regulator SY000 With port adaptor plate SY000 For 0 VC Single solenoid SY000 Double solenoid, position type SY000 Single solenoid With individual SU/EXH spacer assembly SY000 Double solenoid, position type With individual SU/EXH spacer assembly SY000 Single solenoid With interface regulator SY0009 Double solenoid, position type With interface regulator SY000 With port adaptor plate SY000 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 99

48 EX0 Gateway System Serial Transmission System ody orted Manifold Series 000 [Option] How to Order Manifold SSYJ 0S 0 Symbol N Station stations 8 stations stations stations SI unit NN output ( COM.) N output ( COM.) Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) Q, port thread type c 00F G 00N NT 00T NTF SI unit part no. Symbol SI unit specifications NN output ( COM.) N N output ( COM.) SI unit part no. EX0S00 EX0S0 age. to efer to pages 9 to for the details of the EX0 gateway system serial transmission system. 00 LO Z M Type of actuation position single position double position closed center position exhaust center position pressure center ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) M C C N N How to Order Valve D E Nonlocking push type ushturn locking slotted type ushturn locking lever type, port size Onetouch fitting for ø Onetouch fitting for ø Onetouch fitting for ø/ Onetouch fitting for ø/ Q How to Order Manifold ssembly (Example) Example Stations Double solenoid ( VDC) LOUM(Q) ( sets) Single solenoid ( VDC) LOUM(Q) ( sets) Manifold base ( stations) SSYJ0S0(Q) SSYJ0S0 (Q) set (Type 0S station manifold part no.) LOUM (Q) sets (Single solenoid part no.) LOUM (Q) sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering.

49 EX0 Gateway System Serial Transmission System ase Mounted Manifold Series 000 [Option] N 08 0 SI unit NN output ( COM.) N output ( COM.) Symbol Station 0 stations 8 stations stations stations SSYJ SSYJ SSYJ Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) How to Order Valve LO Z How to Order Manifold S S S C N 0 0 M 0 C, port size Onetouch fitting for ø Onetouch fitting for ø/ Example 0, port size M, port size 0 " Q,,, port thread type c F G N NT T NTF SI unit part no. Symbol N SI unit specifications NN output ( COM.) N output ( COM.) SI unit part no. EX0S00 EX0S0 efer to pages 9 to for the details of the EX0 gateway system serial transmission system. Double solenoid ( VDC) LOU(Q) ( sets) age. to How to Order Manifold ssembly (Example) SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Type of actuation position single position double position closed center position exhaust center position pressure center ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) D E Nonlocking push type ushturn locking slotted type ushturn locking lever type Q Stations Single solenoid ( VDC) LOU(Q) ( sets) Manifold base ( stations) SSYJS0M(Q) SSYJS0M (Q) set (Type S station manifold part no.) LOU (Q) sets (Single solenoid part no.) LOU (Q) sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering. 0

50 Series 000 Common SU/Common EXH Type 0 ( ort/ody ported), port port port Note) Ctype models that are have DIN terminals only. [Option] Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ 0 0 Number of stations 0 stations : : 0 0 stations, port thread type 00F 00N 00T c G NT NTF Q pplicable solenoid valve M 0 C N (Q) C N M C N (Q) C N pplicable blanking plate assembly efer to page 0. pplicable individual EXH spacer assembly efer to page 0. Type 0 ( ort/ase mounted), port Type ( ort/ase mounted), port Type ( ort/ase mounted), port, C Type ( ort/ase mounted), port C port port port port port / port port port / How to Order SSYJ : 0 How to Order 0 : 0 How to Order 0 : 0 0 C N Stations stations : 0 stations, port size M SSYJ 0 Stations stations : 0 stations, port size M SSYJ 0 Stations stations : 0 stations How to Order 0 : 0 C N, port size Onetouch fitting for ø Onetouch fitting for ø/" SSYJ 0 Stations stations : 0 stations, port size Onetouch fitting for ø Onetouch fitting for ø/", port thread type F N T c G NT NTF, port thread type F N T c G NT NTF C Thread type F N T M Q M C c G NT NTF, port thread type F N T Q c G NT NTF pplicable solenoid valve 0 (Q) (Q) 0 (Q) (Q) pplicable blanking plate assembly efer to page 0. pplicable individual EXH spacer assembly efer to page 0. pplicable individual SU spacer assembly efer to page 0. Q Q pplicable solenoid valve 0 (Q) (Q) 0 (Q) (Q) pplicable blanking plate assembly efer to page 0. pplicable individual EXH spacer assembly efer to page 0. pplicable individual SU spacer assembly efer to page 0. pplicable individual SU spacer assembly efer to page 0. 0

51 Series 000 Flat ibbon Cable Manifold Common SU/Common EXH Type 0 ( ort/ody ported), port Type ( ort/ase mounted) port port, port port port Type ( ort/ase mounted), port C port port How to Order SSYJ 0 0 Number of stations 0 stations, port thread type : : stations 00F c G 00N NT 00T NTF How to Order SSYJ 0 Number of stations 0 stations : : stations How to Order Number of stations 0 stations : : stations EX0 Gateway System Serial Transmission System Type 0S ( ort/ody ported), port 8 0 N SI unit NN output ( COM.) N output ( COM.) port N port, port port port, port port / port / SI unit NN output ( COM.) N output ( COM.) N Symbol 0 : 08 0 : Type S ( ort/ase mounted) 8 0 Symbol 0 : 08 0 : Type S ( ort/ase mounted) 8 0 SI unit NN output ( COM.) N output ( COM.) Symbol 0 : 08 0 : Station stations : 8 stations stations : stations Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. C N, port thread type F N T SSYJ 0 SSYJ 0S Station stations : 8 stations stations : stations Valve stations Note Double wiring Note ) SSYJ S Station stations : 8 stations stations : stations How to Order Specified layout Note ) (Up to solenoids) How to Order Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) How to Order c G NT NTF, port size M C Onetouch fitting for ø Onetouch fitting for ø/" 0 0, port thread type F N T M c G NT NTF, port size M SSYJ S 0 0 Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) The number of the blanking plate assembly is also included. Note ) Double, port thread type pplicable solenoid valve efer to page 98. pplicable blanking plate assembly efer to page 0. pplicable connector assembly efer to page 98. pplicable solenoid valve efer to page 98. pplicable blanking plate assembly efer to page 0. pplicable connector assembly efer to page 98. pplicable solenoid valve efer to page 00. pplicable blanking plate assembly efer to page 0., port thread type 00F 00N 00T c G NT NTF pplicable solenoid valve efer to page 0. pplicable blanking plate assembly efer to page 0. wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control Q Q F N T c G NT NTF signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) Q Note) : For DC only. Q Q [Option], port size 0 " pplicable solenoid valve efer to page 0. pplicable blanking plate assembly efer to page 0. Q 0 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

52 Series 000 Flat ibbon Cable Manifold EX0 Gateway System Serial Transmission System Type S ( ort/ase mounted) How to Order SSYJ S 8 0 <Standard> N ound head combination screw M. x, Matt nickel plated (with spring washer) SI unit NN output ( COM.) N output ( COM.), port port port Symbol 0 : 08 0 : Station stations : 8 stations stations : stations, port size Specified layout Note ) C Onetouch fitting for ø (Up to solenoids) Q N Onetouch fitting for ø/" The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) ound head combination screw M. x, Matt nickel plated (with spring washer) Valve stations Note 0 Double wiring Note ) F N T <CEcomplaint> C,,, port thread type c G NT NTF Combinations of Solenoid Valve, Manifold Gasket and Manifold ase ound head combination screw M. x, Matt nickel plated (with spring washer) pplicable solenoid valve efer to page 0. pplicable blanking plate assembly efer to lanking late ssembly below. [Option] ound head combination screw M. x, Matt nickel plated (with spring washer) Manifold Gasket DXT90 Manifold Gasket DXT90 Manifold Gasket DXT90 Manifold Gasket DXT90 pplicable manifold base Type SSYJ0 Type SSYJ0 Type SSYJ0S pplicable manifold base Subplate Type SSYJ Type SSYJ0 Type SSYJ Type SSYJ Type SSYJS Type SSYJ Type SSYJS Type SSYJ Type SSYJS pplicable manifold base Type SSYJ0Q Type SSYJ0Q Type SSYJ0SQ pplicable manifold base Subplate Type SSYJQ Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJSQ Type SSYJQ Type SSYJSQ Type SSYJQ Type SSYJSQ lanking late ssembly ound head combination screw ound head combination screw ound head combination screw ound head combination screw lanking plate lanking plate lanking plate lanking plate Gasket Gasket Gasket Gasket pplicable manifold base SSYJ0(Q) pplicable manifold base SSYJ0(Q) SSYJ(Q) Dust cap SSYJ(Q) SSYJ(Q) Dust cap pplicable manifold base SSYJ0(Q) pplicable manifold base SSYJ(Q) SSYJ(Q) 0 Caution Mounting screw tightening torques M.: 0.N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts.

53 Series 000 Mix Installation of the 00 and the 000 Valves on the Same Manifold Use of an adapter plate makes it possible to mount Series 00 on the manifold bases of series 000. When mounting the 00 valve on the 000 manifold, the 00 solenoid must be positioned on the same side of the manifold as a single solenoid 00. (efer to the figure below.) For base mounted style, the port of the port valve flows out the port of manifold base. dapter late ssembly <Standard> 00 Gasket ound head combination screw ound head combination screw dapter plate dapter gasket pplicable manifold base Type SSYJ0 00 Individual EXH Spacer ssembly 000 ound head combination screw Manifold gasket ound head combination screw dapter plate (ositioning pin) dapter gasket pplicable manifold base Type SSYJ0 Type SSYJ Type SSYJ Type SSYJ 000 ound head combination screw <CEcomplaint> 00Q ound head combination screw ound head combination screw Manifold gasket Gasket Gasket pplicable manifold base Type SSYJ0Q Individual SU Spacer ssembly ound head combination screw ound head combination screw dapter plate (ositioning pin) dapter plate Q pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJQ (Q) Thread type F N T c G NT NTF Gasket SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ ositioning pin Manifold gasket Individual EXH spacer pplicable manifold base SSYJ0(Q) Individual SU spacer pplicable manifold base SSYJ0(Q) SSYJ(Q) SSYJ(Q) SSYJ(Q) Individual SU spacer pplicable manifold base Type SSYJ(Q) Type SSYJ(Q) Type SSYJ(Q) Caution Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. 0

54 Series 000 Interface egulator ( port regulation) Spacer type regulating valve on manifold block can regulate the pressure to the valve individually. YJ00000(Q) ound head combination screw ase mounted Gasket efer to page prior to handling. pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) Type SSYJ(Q) Caution Mounting screw tightening torques M.: 0. N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. 0

55 Series 000 Type 0: Top orted/ssyj0 Stations 00 [ ]: C Grommet (G) 0. [0.]. [9.9]. (DIN.) L 9 L g For C, N, C, N (uiltin onetouch fitting) pprox. 00. (DIN.8).. 8. [.]. (itch) =.. (Station n) (Station ) (DIN 0.8) (DIN.) x ø.. [9.] (, port) 8. [9.] (, port) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/", ø, ø/" (.).8 L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) pprox. 00 pprox [.] Max. 0 pplicable cable O.D. ø. to ø M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ [.] 0 [.] [9.] 0. [0.8] 8. [9.8]. [9.] [.] efer to page for dimentions with connector cable. Station n L L Station Station 0 8 0

56 Series 000 Type 0: ottom orted/ssyj0 Stations M [ ]: C Grommet (G) 0. [0.] pprox. 00. [.].9 (DIN 8.). (DIN.) L L (itch) = 9. x ø.. (DIN.). (DIN.).. [.8] 8. [9.] 8.. (, port) (Station n) (Station ) 8. [.]. 0 uiltin speed controller (, port) Max... (itch) = L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) pprox. 00 Max. 0 pplicable cable O.D. g ø. to ø pprox [.] M8 x [.] 0 [.]. [.] 0. [0.8] 8. [9.8] 0.. [.9] [.] efer to page for dimentions with connector cable. Station n L L 08 Station Station 0 8

57 Series 000 Type : Side orted/ssyj Stations M [ ]: C Grommet (G) pprox. 00. L L x ø. 0. [0.] 0. [.] 8. (DIN 9.) 0.9 (DIN.).... (DIN.) (DIN 8.) 9. [.8] 8. [9.] (, port) SJ SY SV 8 (itch) = SZ (Station ) (Station n) uiltin speed controller Max... V S000 VQ. [9.]. (itch) =. 8. (, port) L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) VQ VQ VQC VQZ SQ VFS [.] 0. 0 [.]. [9.]. 9. [.]. 0. [0.8] [9.8]. 9. [.9] M8 x VF VQ pprox. 00.[0.] pprox. 00 Max. 0 g pplicable code O.D. ø. to ø efer to page for dimentions with connector cable. Station n L L Station Station

58 Series 000 Type : Side orted/ssyj Stations 0, C N Grommet (G) For 0 [ ]: C C For N (uiltin onetouch fitting) pprox. 00. L L x ø. 0. [0.]. [.]. (DIN.).9 ( DIN.). (itch) =. (DIN.) 0. (DIN.). [.8] 8. [9.]. 0. / (, port) / (, port) (Station ) (Station n) uiltin speed controller (Station ) (Station n). [8.].. Max.... [8.].. (itch) = 8. (, port) 9 (itch) = 8. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" Other dimensions are the same as the grommet type. L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) [.] 0. 0 [.]. [8.].. [.] 0. [0.8] [9.8]. [.9] M8 x pprox. 00. [9.] pprox. 00 Max. 0 g pplicable code O.D. ø. to ø efer to page for dimentions with connector cable., port size For For C/N 0 Station n L L L L Station Station 0 9 0

59 Series 000 C Type : Side orted/ssyj Stations N Grommet (G) [ ]: C pprox. 00. L L [0.]. [.8]. [9.] 0. (DIN.) 8. (DIN 9.). 8. [9.].. (Station ) (itch) = (itch) = 0. (Station n) x ø. 9.9 (DIN:.). (DIN:.) Onetouch fitting (, port) [.] 8. [9.] pplicable tubing O.D.: ø, ø/" (, port).9. (.) uiltin slottle valve Max.. L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) 0.. M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 0 [.] [.] [.] 0. [0.8] 8. [9.8]. [.] pprox. 00. [0.] pprox. 00 Max. 0 g pplicable code O.D. ø. to ø efer to page for dimentions with connector cable. Station n L L Station Station 0 0

60 Series 000 Flat ibbon Cable Manifold [ ]: C SSYJ0 Stations 00 L L 9 (, port) x ø. [.]. [9.8] [9.] 0 [.] For C N C N (uiltin onetouch fitting) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/", ø, ø/" (itch) =. Triangle mark (, port) (.).8 (Station n) (Station ) 8. [.] 0.8. pplicable connector: pins With strain relief (Conforming to MILC80) 8. Station n L L Station Station.. SSYJ Stations M (, port) (itch) =.. 8. L L. uiltin slottle valve [.] 0. [.] [.] 0 [.] 8.8. Max.. x ø. (itch) =. Triangle mark (, port) (Station n) (Station ). [9.].8 9. pplicable connector: pins With strain relief (Conforming to MILC80) 8. Station n L L Station Station. 9.

61 Series 000 Flat ibbon Cable Manifold SSYJ Stations C N Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) =.. 8 [ ]: C L L. uiltin speed controller SJ SY [.]. [.] [.] 0 [.]...9 (.) 0.. Max.. SV SZ x ø. (itch) =. Triangle mark (, port) V S000 (Station n) (Station ) VQ. [9.] pplicable connector: pins With strain relief (Conforming to MILC80) VQ VQ VQC VQZ Station n L L Station Station. 9. SQ VFS VF VQ

62 Series 000 EX0 Gateway System Serial Transmission System SSYJ0S Stations Manual override L L 9 (itch) =. C, N For C, N (uiltin onetouch fitting)... x ø Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/", ø,ø/" (, port) (Station n) Output no. (Station ) (, port) (.) SI unit W COM 0.. Connector lock pin Take out when wiring the connector assembly. Station n Station L L Station 0. 8.

63 Series 000 EX0 Gateway System Serial Transmission System SSYJS Stations M (, port) (itch) = x ø. (Station n) L L (itch) =. Output no. (Station ) (, port) SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ SI unit W COM Connector lock pin Take out when wiring the connector assembly. Station n Station L L Station

64 Series 000 EX0 Gateway System Serial Transmission System SSYJS Stations 0 (, port) (itch) = L L (itch) = x ø. / (, port) (Nonlocking) Output no. (Station n) (Station ) Light/surge voltage suppressor SI unit W COM Connector lock pin Take out when wiring the connector assembly to the housing. Wiring part. Station n Station Station L L

65 Series 000 EX0 Gateway System Serial Transmission System SSYJS Stations C N Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" (itch) =.. 8 SJ SY SV L L. SZ V x ø. (itch) = (.).9 S000 VQ VQ VQ VQC VQZ SQ VFS Output no. (Station n) (Station ) (, port) VF VQ SI unit W COM Connector lock pin Take out when wiring the connector assembly. Station n Station L L Station

66 ubber Seal ort Solenoid Valve Series 000 Specifications [Option] JIS Symbol ody ported position single ()() ()()() position double ()() ()()() position closed center ()() ()()() position exhaust center ()() ()()() position pressure center ()() ody ported ase mounted ase mounted position single solenoid () () ()()() position double solenoid () () ()()() position closed center () () ()()() position exhaust center () () ()()() position pressure center () () Fluid ir position single 0. to 0. Operating pressure range (Ma) position double 0. to 0. position 0. to 0. mbient and fluid temperature ( C) 0 to 0 (No freezing) Note ) esponse time (ms) (at 0. Ma) Max. operating frequency (Hz) position single, double position position single, double position 0 or less 0 or less (Manual operation) ilot exhaust method Lubrication Mounting orientation Shock/Vibration resistance (m/s Note ) ) Enclosure Nonlocking push type, ushturn locking slotted type, ushturn locking lever type Individual exhaust for the pilot valve, Common exhaust for the pilot and main valve Not required Unrestricted 0/0 Dust proof ( M8 connector conforms to I.) ased on IEC09 Note ) ased on dynamic performance test, JIS 898. (Coil temperature: 0 C, at rated voltage, without surge suppressor) Note ) Impact resistance: No malfunction occurred when it is tested in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. (Value in the initial state) Vibration resistance: No malfunction occurred in one sweep test between and 000 Hz. Test was performed at both energized and deenergized states in the axial direction and at the right angles to the main valve and armature. (Value in the initial state) Solenoid Specifications Electrical entry Coil rated voltage (V) DC C 0/0 Hz llowable voltage fluctuation ower consumption (W) DC Standard With power saving circuit 00 V 0 V pparent power (V) [ V] C 00 V 0 V [0 V] Surge voltage suppressor Indicator light Grommet (G), (H) L plug connector (L) M plug connector (M) DIN terminal (D), (Y) M8 connector (W) G, H, L, M, W,,,,, 00, 0, 00, 0 ±0% of rated voltage 0. {With light: 0. (DIN terminal with light: 0.)} 0. (With light only) 0.8 (With light: 0.8) 0.8 (With light: 0.89) [0.9 (With light: 0.9)].8 (With light:.).0 (With light:.) [. (With light:.)] [.9 (With light:.0)] Diode (DIN terminal, Varistor when nonpolar types) LED (Neon light when C with DIN terminal) In common between 0 VC and VC, and between 0 VC and 0 VC. For VC and 0 VC, the allowable voltage is % to % of rated voltage. S, Z and T type (with power saving circuit) should be used within the following allowable voltage fluctuation range due to a voltage drop caused by the internal circuit. S and Z type: VDC: % to 0%, VDC: % to 0% T type: VDC: 8% to 0%, VDC: % to 0% D, Y 0.8 (With light: 0.8) 0.8 (With light: 0.9) [0.9 (With light:.0)]. (With light:.0). (With light:.) ()()() ()()() Made to Order (For details, refer to pages and.) 8

67 ubber Seal ort Solenoid Valve Series 000 Flow Characteristics/Mass ody ported ase mounted Valve model ody orted Series 00 Type of actuation position 0 0 position position 0 C position position 0 C8 position position 0 0 position position 0 0 position verage speed (mm/s) Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Single Double Closed center Exhaust center ressure center Cylinder Speed Chart ort size,, (,E,E) / Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm, (,) Flow characteristics Note ) Ρ/ (Ρ/) /Ρ/ (/ΡE/E) C [dm /(s bar)]..8 b Cv C [dm /(s bar)]..0 b Cv [.] 0.[0.] 0. [0.9].0 [0.8] 0. [0.0] 0.8 [0.] C (Onetouch. fitting for ø)..8 [0.8].0 C8 (Onetouch. fitting for ø8)..9 [0.8]..9.. [0.8]. /.9.. [0.8] [0.0] [0.] [0.] [0.] [0.] [0.] [0.] [0.]..9. [.]...0. [.]..8.. [.]..9.. [.]. Use as a guide for selection. lease confirm the actual conditions with SMC Sizing rogram. ore size [0.] [0.9] [0.] [0.] [0.8] [0.8] [0.] [0.] 0.8 Grommet Mass (g) Note, ) Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm Series M, C ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 ø0 ø0 ø ø80 ø (8) 8 (98) 88 (08) (8) 8 (98) 88 (08) L/M plug connector (8) 80 (00) DIN terminal (0) () 90 (0) () 98 (8) (8) 80 (00) 8 (0) () M8 connector (90) 88 (08) 0 (90) 88 (08) 90 (0) () 98 (8) Note ) [ ]: denotes the normal position. Exhaust center: / /, ressure center: / Note ) ( ): Without subplate. Note ) For DC voltages. For C voltages add g to the weight of the single solenoid and g to the weight of the double solenoid and position types erpendicular, upward actuation Horizontal actuation SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ ase Mounted Series 00 verage speed (mm/s) Series CJ ressure 0. Ma Load rate: 0% Stroke 0 mm ore size Series CM ressure 0. Ma Load rate: 0% Stroke 00 mm Series M, C ressure 0. Ma Load rate: 0% Stroke 00 mm ø ø0 ø ø0 ø ø ø0 ø0 ø0 ø ø80 ø Cylinder is in extending. Speed controller is meterout, which is directly connected with cylinder and its needle is fully opened. verage speed of cylinder is obtained by dividing the full stroke time by the stroke. Load factor: ( (Load weight x 9.8) /Theoretical force) x 00% erpendicular, upward actuation Horizontal actuation Conditions 00 ody ported Tubing bore x Length Speed controller Silencer Series CJ Series CM Series M/C ø x m ø x m S0F0 S0F0 S00F N00 N000 ase mounted Tubing bore x Length 00 Speed controller Silencer Series CJ Series CM Series M/C ø x m S0F0 S00F0 N00 N000 N0F0 9

68 Series 000 Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center (For manifold type 0, ) ated voltage DC V S VDC VDC VDC VDC VDC DC specifications of type D, Y, DO and YO are only available with and VDC. How to Order Light/surge voltage suppressor Electrical entry for G, H, L, M, W Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the "Z" type. C ( 0 /0 Hz) 00 VC 00 VC 0 VC [ VC] 0 VC [0 VC] For type W, DC voltage is only available. Note) Ctype models that are have DIN terminals only. Electrical entry for D, Y S Z Note) Ctype models that are have DIN terminals only. Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ and YOZ are not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. Thread type c F G N NT T NTF, port size 0 C Onetouch fitting for ø C8 Onetouch fitting for ø8 N Onetouch fitting for ø/" N9 Onetouch fitting for ø/" racket : Without bracket F: With bracket [Option] Note) Do not remove the factory installed bracket from models with the bracket option. emoval of the bracket will cause the valve to leak. rackets cannot be retrofitted. ody ported 0 M 0 ase mounted For subplate, manifold type 0,, 0 ody option 0: ilot valve individual : Common exhaust type exhaust for the pilot valve for main and pilot valve port, E port port, E port M Coil specifications Standard With power saving circuit T <, VDC only> ower saving circuit is not available in the case of D, Y, DO, YO or W type. Thread type c F G N NT T NTF X0 : Nonlocking push type Made to Order ody orted External ilot (efer to page.) Q Note) Ctype models that are CE compliant have DIN terminals only. ort size : Without subplate,,,, VDC 00,0, 00, 0 VC Grommet L plug connector M plug connector G: Lead wire length 00 mm L: With lead wire (Length 00 mm) M: With lead wire (Length 00 mm) MN: Without lead wire, VDC 00,0, 00, 0 VC DIN terminal D, Y: With connector Electrical entry,,,, VDC M8 connector WO: Without connector cable D: ushturn locking slotted type (With gasket and screws) 0: /8 With subplate Note) H: Lead wire length 00 mm LN: Without lead wire LO: Without connector MO: Without connector DO, YO: Without connector W : With connector Note ) cable E: ushturn locking lever type 0: / With subplate CE DC compliant C 0 LN, MN type: with sockets. efer to page 9 for the lead wire length of L and M plug connectors. efer to page for the connector assembly with cover for L and M plug connectors. DIN terminal type Y which conforms to EN080C (former DIN0C) is also available. For details, refer to page. For connector cable of M8 connector, refer to page. M8 thread conforming to IEC09 standard is also available. efer to page for details. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page. Note), port: / Note) When placing an order for body ported solenoid valve as a single unit, mounting screws for manifold and gasket are not attached. Order them separately, if necessary. (For details, refer to page.)

69 ubber Seal ort Solenoid Valve Series 000 Construction ()() position single position double () () ()() () e yq t r w w q t r () () () () ()() () position closed center/exhaust center/pressure center position closed center ()() ()() () position exhaust center ()() ()() () position pressure center ()() ()() () () Component arts No. () () Description Material ody luminum diecasted iston plate esin End cover luminum diecasted iston esin Spool valve assembly luminum, HN Spool spring Stainless steel How to Order ilot Valve ssembly V G V D i t q rw () Note White White White () () () () () eplacement arts () i () u (This figure shows a closed center type.) No. Description art no. Subplate Note) 000(Q) 000(Q) 8 ilot valve V(T) Note) dd suffix Q for the CEcompliant product. / i Note luminum diecasted SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Coil specifications Standard With power saving circuit T (, VDC only) ower saving circuit is not available in the case of W type. V S ated voltage VDC VDC VDC VDC VDC 00 VC 0/0 Hz 00 VC 0/0 Hz 0 VC 0/0 Hz [ VC 0/0 Hz] 0 VC 0/0 Hz [0 VC 0/0 Hz] For type W, DC voltage is only available. CEcompliant: For DC only. Light/surge voltage suppressor Without light/surge voltage suppressor S With surge voltage suppresor Z With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) U With light/surge voltage suppressor (Nonpolar type) For C voltage valves there is no S option. It is already builtin to the rectifier circuit. For type and U, DC voltage is only available. ower saving circuit is only available in the Z type. Electrical entry G H L LN LO M MN MO WO W Grommet, 00 mm lead wire Grommet, 00 mm lead wire L plug connector M plug connector M8 connector With lead wire Without lead wire Without connector With lead wire Without lead wire Without connector Without connector cable With connector cable Note ) For connector cable of M8 connector, refer to page. Note ) Enter the cable length symbols in. lease be sure to fill in the blank referring to page. Note) Since V and V are CEcompliant as standard, the suffix "Q is not necessary. ated voltage VDC VDC 00 VC 0/0 Hz 00 VC 0/0 Hz 0 VC 0/0 Hz [ VC 0/0 Hz] 0 VC 0/0 Hz [0 VC 0/0 Hz] Electrical entry D DO Y YO Light/surge voltage suppressor S Z DIN terminal (Type D) DIN terminal (Type Y) Without light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) DOZ is not available. For C voltage valves there is no S option. It is already builtin to the rectifier circuit. With connector Without connector With connector Without connector Note) Do not replace V (G, H, L, M, W) to V (DIN terminal) and vice versa when replacing pilot valve assembly only.

70 (.9) Series 000 osition Single [ ]: C Grommet (G), (H): 0 0 G H With bracket: G 0 0 F x ø. H 8 [8.] G: pprox. 00 H: pprox [.] x ø. (For manifold mounting) x ø. (, port) (racket). 8. [8.8]. [8.] uiltin onetouch fitting: C, N 0 (F) G H C8, N9 (,, port) ø. (E port) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/" (.) L plug connector (L): 0 L 0 (F) M plug connector (M): 0 M 0 (F) DIN terminal (D, Y): 0 0 (F) D Y M8 connector (WO): 0 WO 0 (F). [8.]. pprox. 00. [9.] pplicable cable O.D. ø. to ø pprox. 00 Max. 0 M8 x 9.9 [9.] 8. [8.]. g x ø. 8 (.) x ø. 8 (.) x ø. 8 (.) x ø. 8 (.) efer to page for dimentions with connector cable.

71 ubber Seal ort Solenoid Valve Series 000 osition Double [ ]: C Grommet (G), (H): 0 0 G H uiltin onetouch fitting: G C, N 0 H C8, N9 0. [.8] G: pprox. 00 H: pprox. 00 x ø. (For manifold mounting) x ø. (, port) (.9) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/" SJ SY SV 8... [8.] SZ V S000 8 VQ (,, port). ø. (E port) VQ VQ VQC VQZ SQ L plug connector (L): 0 L 0 pprox. 00. [8.]. M plug connector (M): 0 M 0 DIN terminal (D, Y): 0 D Y 0 Max M8 connector (WO): 0 WO 0 M8 x VFS VF VQ pprox. 00. [9.] 8.. [.] x ø. 0. [] 9. x ø. x ø x ø. 8 8 g pplicable cable O.D. ø. to ø 8 8 efer to page for dimentions with connector cable.

72 Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C Grommet (G), (H): 0 0 G H uiltin onetouch fitting: C, N 0 G H C8, N9 [.]. [.].. G: pprox. 00 H: pprox. 00 x ø. (For manifold mounting) x ø. (, port) (.9) Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" : ø8, ø/" [8.] (,, port). ø. (E port) L plug connector (L): 0 L 0 M plug connector (M): 0 M 0 DIN terminal (D, Y): 0 D Y 0 M8 connector (WO): 0 WO 0 pprox. 00. [8.]. pprox. 00. [9.] Max M8 x 8..8 [.]. [.] x ø.. [.]. [.8] 9.. x ø x ø x ø. 8 8 g 8 8 pplicable cable O.D. ø. to ø efer to page for dimentions with connector cable.

73 ubber Seal ort Solenoid Valve Series 000 osition Single [ ]: C Grommet (G), (H): 0 G 0 H 0. G: pprox. 00 H: pprox [.] L plug connector (L): 0 L 0. [.] 0 pprox x ø. 8. [8.] / (, port) M plug connector (M): 0 M [.] pprox. 00 /, (,, port) [8] With interface regulator. DIN terminal (D, Y): 0 D Y 0 0 pplicable cable O.D. ø. to ø 8.8 [] g [8.]... Max..0 M8 connector (WO): 0 WO 0 0 M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ 9. [9.] efer to page for dimentions with connector cable.

74 Series 000 osition Double [ ]: C G 0 H 0 Grommet (G), (H): 0 G: pprox. 00 H: pprox [.8] x ø. 8. With interface regulator 8.8 [] /, (,, port)... [.] 0 80 [8].. 8 / (, port)... L plug connector (L): 0 L 0 0 M plug connector (M): 0 M 0 0 DIN terminal (D, Y): 0 D Y 0 0 M8 connector (WO): 0 WO 0 0. [.]. pprox [.] pprox. 00 pplicable cable O.D. ø. to ø M8 x. 0. [.] [].. 0. g Max. 0 efer to page for dimentions with connector cable.

75 ubber Seal ort Solenoid Valve Series 000 osition Closed Center/Exhaust Center/ressure Center [ ]: C G 0 Grommet (G), (H): 0 H [.] G: pprox. 00 H: pprox. 00. L plug connector (L): 0 0 L.8 [.] pprox [.]. 0 [.] x ø [.] pprox With interface regulator. g M8 x Max. 0. [.]. [8.] /, (,, port) 0 / (, port) M plug connector (M): 0 0 M 0 [8.] 80 [8] DIN terminal (D, Y): 0 D 0 Y 0 pplicable cable O.D. ø. to ø 9. [.8] M8 connector (WO): 0 0 WO 0 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ.9 [8.] efer to page for dimentions with connector cable.

76 Series 000 Manifold Specifications [Option] Manifold Standard Manifold Specifications Model Type 0 Type Type 0 Type Type Manifold type (SU), (EXH) Valve stations, port orting specifications ort size Location Direction, port, port to stations Valve Top C (Onetouch fitting for ø) C8 (Onetouch fitting for ø8) Single base/ mount Common SU, Common EXH to 0 stations ase ottom / ase Side C (Onetouch fitting for ø) C8 (Onetouch fitting for ø8) Flow Characteristics ody ported for internal pilot ase mounted for internal pilot Manifold Type SSYJ0 Type SSYJ ort size (), /() (), () C ort ort [dm /(s bar)] / / / / / / C C8 C C8 C Type SSYJ0 Type SSYJ Type SSYJC Type SSYJC8 / C8 Note) Value at manifold base mounted, position single operating Flow characteristics / ( /) / / (/ ) b Cv C [dm /(s bar)] b Cv How to Order Manifold (Example) Instruct by specifying the valves and blanking plate assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ00 pc. (Manifold base) 0G0 pcs. (Valve) 000 pc. (lanking plate assembly) SSYJ00 pc. (Manifold base) 0LZ pc. (Valve) 0LZ pc. (Valve) 000 pc. (lanking plate assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. 8

77 ubber Seal ort Solenoid Valve Series 000 Flat ibbon Cable Manifold Note) : For DC only. [Option] Multiple valve wiring is simplified through the use of the flat cable connector. Clean appearance In the case of a flat ribbon cable type, each valve is wired on the print board of manifold base to allow the external wiring to be piped all together with pins MIL connector. How to Order Valve ated voltage For DC For C Type of actuation position single position double position closed center position exhaust center position pressure center ated voltage D E VDC VDC 00 VC 0 VC ( VC) Nonlocking push type ushturn locking slotted type ushturn locking lever type Note) : For DC only. LOZ 0 Flat ibbon Cable Manifold Specifications Model Manifold type (SU), (EXH) Valve stations, port location, port ort size, port pplicable flat ribbon cable connector Internal wiring ated voltage Note ) How to Order Manifold (Example) LOZ F N T, port size Symbol ort size 0 C Onetouch fitting for ø C8 Onetouch fitting for ø8 N Onetouch fitting for ø/" N9 Onetouch fitting for ø/" Thread type c G NT NTF 0 Note) In the case of flat ribbon cable type, U and Z types are for DC specifications and Z type is for C specifications. Z type for DC is positive common specification onlly. For the other combination, please contact SMC. Type Single base/ mount Common SU, Common EXH to stations Valve /, C, C8 Socket: pins MIL type with strain relief (MILC80) In common between COM and COM (Z type: COM only)., VDC, 00, 0 VC Note ) The value is for manifold base and individually operated position type. Note ) The withstand voltage specification for the wiring unit section is JIS C 00, Grade or its equivalent. Note ) CEcompliant: For DC only. Flow Characteristics ody ported for internal pilot Light/surge voltage suppressor Z With light/surge voltage suppressor With light/surge voltage suppressor U (Nonpolar type) Note) Z: ositive common specifications only. Manifold Type SSYJ0 Type SSYJC Type SSYJC8 ort size (), /() ort / / / Note) Value at manifold base mounted, position single operating Instruct by specifying the valves, blanking plate assembly and connector assembly to be mounted on the manifold along with the manifold base model no. Example: SSYJ0 (Q) pc. (Manifold base) LOUC8 (Q) pcs. (Valve) LOUC8 (Q) pcs. (Valve) 000 (Q) pc. (lanking plate assembly) SY000 pcs. (Connector assembly) SY000 pcs. (Connector assembly) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. Note) lease indicate the connector assembly part no. below that connects the valve and the manifold. Q [Option] Note) : For DC only. (), () ort C C8 Flow characteristics / ( /) / / (/ ) C b Cv b Cv [dm /(s bar)] C [dm /(s bar)]... Connector ssembly For, VDC Single solenoid Double solenoid, position type Single solenoid With individual EXH spacer assembly Double solenoid, position type With individual EXH spacer assembly With port adaptor plate SY000 SY000 SY000 SY000 SY000 For 00 VC Single solenoid SY000 Double solenoid, position type SY000 Single solenoid SY000 With individual EXH spacer assembly Double solenoid, position type SY000 With individual EXH spacer assembly With port adaptor plate SY000 For 0 VC Single solenoid SY000 Double solenoid, position type SY000 Single solenoid With individual EXH spacer assembly SY0009 Double solenoid, position type With individual EXH spacer assembly SY000 With port adaptor plate SY000 9 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

78 Series 000 EX0 Gateway System Serial Transmission System Manifold for EX0 Serial Wiring Specifications Model Manifold type (SU), (EXH) Valve stations, port orting Location specifications Direction, port ort size, port ated voltage Type S Type S Single base/ mount Common SU, Common EXH to stations Valve ase Top Side /, C, C8 (Onetouch fitting for ø, ø8) VDC Flow Characteristics Type S Manifold ody ported Type SSYJS for internal pilot ase mounted Type SSYJS for internal pilot ort size (), /() ort / / / / (), () ort C C8 Flow characteristics / ( /) / / (/ ) C C b Cv b Cv [dm /(s bar)] [dm /(s bar)] How to Order Manifold (Example) SSYJS0 set (Type S stations manifold part no.) LOU0 sets (Single solenoid part no.) LOU0 sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering. 0

79 SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

80 EX0 Gateway System Serial Transmission System ody orted Manifold Series 000 [Option] How to Order Manifold Symbol 0 SSYJ 08 0 Station stations 8 stations stations stations N S SI unit NN output ( COM.) N output ( COM.) Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) 0, port thread type 00F 00N 00T Q c G NT NTF SI unit part no. Symbol SI unit specifications NN output ( COM.) N N output ( COM.) SI unit part no. EX0S00 EX0S0 age. to efer to pages 9 to for the details of the EX0 gateway system serial transmission system. Type of actuation position single position double position closed center position exhaust center position pressure center LO Z 0 ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) Nonlocking push type ushturn locking slotted type ushturn locking lever type, port size 0 Thread type C C8 N N9 Onetouch fitting for ø Onetouch fitting for ø8 Onetouch fitting for ø/" Onetouch fitting for ø/" F N T c G NT NTF D E How to Order Valve Q How to Order Manifold ssembly (Example) Example Stations Double solenoid ( VDC) LOU0(Q) ( sets) Single solenoid ( VDC) LOU0(Q) ( sets) Manifold base ( stations) SSYJS0(Q) SSYJS0 (Q) set (Type S station manifold part no.) LOU0 (Q) sets (Single solenoid part no.) LOU0 (Q) sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering.

81 EX0 Gateway System Serial Transmission System ase Mounted Manifold Series 000 [Option] How to Order Manifold SSYJ S N Symbol Station 0 stations stations stations stations SI unit NN output ( COM.) N output ( COM.) LO Z Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) 0 The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) How to Order Valve 0, port size 0,,, port thread type F N T " c G NT NTF Q SI unit part no. Symbol N SI unit specifications NN output ( COM.) N output ( COM.) SI unit part no. EX0S00 EX0S0 efer to pages 9 to for the details of the EX0 gateway system serial transmission system. Double solenoid ( VDC) LOU0(Q) ( sets) age. to How to Order Manifold ssembly (Example) Example SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS Type of actuation position single position double position closed center position exhaust center position pressure center 8 0 Single solenoid ( VDC) LOU0(Q) ( sets) Manifold base ( stations) SSYJS0(Q) VF VQ ated voltage: VDC Light/surge voltage suppressor Z With light/surge voltage suppressor Without light/surge voltage suppressor U (nonpolar type) Stations D E Nonlocking push type ushturn locking slotted type ushturn locking lever type Q SSYJS0 (Q) set (Type S station manifold part no.) LOU0 (Q) sets ( station manifold part no.) LOU0 (Q) sets (Double solenoid part no.) The asterisk denotes the symbol for assembly. refix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers under the manifold base part number. In the case of complex arrangement, specify them on the manifold specification sheet. The connector assembly lead wire length used for EX0 manifold varies depending on the number of stations. Therefore, solenoid valves (including a blanking plate) and connector assembly are assembled when shipped as a standard specification. lease specify the mounting solenoid valve when ordering.

82 Series 000 Manifold Standard Common SU/Common EXH Note) Ctype models that are have DIN terminals only. [Option] Type 0 ( ort/ody ported), port, port port / port /, port, port C, C8 port port Type ( ort/ody ported) port / port / Type 0 ( ort/ase mounted), port Type ( ort/ase mounted) port / port / Type ( ort/ase mounted) port / port / How to Order SSYJ : Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ 0 0 : 0 Stations stations : stations Stations stations : stations Note) For more than stations, supply air to both sides of port and exhaust air from both sides of port. How to Order SSYJ Note) For more than 0 stations, supply air to both sides of port and exhaust air from both sides of port. How to Order Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. 0 : 0 0 : 0 Stations stations : 0 stations How to Order, port size 0 SSYJ 0 0 Stations 0 stations : : 0 0 stations, port size 0 SSYJ Stations stations : 0 stations, port thread type 00F 00N 00T Thread type c F G N NT T NTF 0 c G NT NTF, port thread type 00F 00N 00T c G NT NTF C, port size C Onetouch fitting for ø C8 Onetouch fitting for ø8 N Onetouch fitting for ø/" N9 Onetouch fitting for ø/" Thread type c F G N NT T NTF Thread type c F G N NT T NTF Note) For more than 8 stations, supply air to both sides of port and exhaust air from both sides of port. Q Q Q Q pplicable solenoid valve 0 0 C N(Q) C8 N9 0 C N(Q) C8 N9 pplicable blanking plate assembly efer to page. pplicable individual EXH spacer assembly efer to page. Q pplicable solenoid valve 0 (Q) (Q) pplicable blanking plate assembly efer to page. pplicable individual EXH spacer assembly efer to page. pplicable individual SU spacer assembly efer to page. pplicable interface regulator efer to page.

83 Series 000 Flat ibbon Cable Manifold Common SU/Common EXH Type ( ort/ody ported), port, port 8 0 port / port / EX0 Gateway System Serial Transmission System Type S ( ort/ody ported) N SI unit NN output ( COM.) N output ( COM.) port / port / Type S ( ort/ase mounted) N, port port / SI unit NN output ( COM.) N output ( COM.) port / How to Order SSYJ 0 Note) For more than 0 stations, supply air to both sides of port and exhaust air from both sides of port. 0 : 08 0 : Stations 0 stations : : stations How to Order SSYJ S 0 0 : 08 0 : Station stations : 8 stations stations : stations Valve stations Note Double wiring Note ), port thread type c 00F G 00N NT 00T NTF pplicable solenoid valve efer to page 9. pplicable blanking plate assembly efer to page. pplicable connector assembly efer to page 9. pplicable solenoid valve efer to page. pplicable blanking plate assembly efer to page. The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) How to Order, port thread type 00F 00N 00T c G NT NTF Q SSYJ S 0 0 Station stations : 8 stations stations : stations Valve stations Note Double wiring Note ) Specified layout Note ) (Up to solenoids) Specified layout Note ) (Up to solenoids) Q, port size 0 ", port thread type c F G N NT T NTF Note) : For DC only. pplicable solenoid valve efer to page. pplicable blanking plate assembly efer to page. Q The number of the blanking plate assembly is also included. Note ) Double wiring: Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note ) Specified layout: Indicate wiring specifications on the manifold specification sheet. (Note that double and position valves cannot be used where single solenoid wiring has been specified.) [Option] SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ

84 Series 000 Combinations of Solenoid Valve, Manifold Gasket and Manifold ase ound head combination screw M x Matt nickel plated (with spring washer) ound head combination screw M x Matt nickel plated (with spring washer) pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) Type SSYJS(Q) Individual EXH Spacer ssembly 000 (Q) ound head combination screw Gasket DXT990 Thread type c F G N NT T NTF 000 ound head combination screw Gasket DXT99 (Q) pplicable manifold base Subplate Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) Type SSYJS(Q) Thread type c F G N NT T NTF Individual EXH spacer Individual EXH spacer Manifold gasket Manifold gasket pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) Individual SU Spacer ssembly 000 ound head combination screw (Q) Thread type c F G N NT T NTF Interface egulator ( port regulation) Spacer type regulating valve on manifold block can regulate the pressure to the valve individually. YJ00000(Q) ound head combination screw Individual SU spacer Gasket ase mounted Manifold gasket Caution pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) Mounting screw tightening torques M: 0.8 N m Use caution to the assembly orientation for solenoid valves, gasket, and optional parts. pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) efer to page prior to handling.

85 Series 000 Mix Installation of the 00 and the 000 Valves on the Same Manifold Use of an adapter plate makes it possible to mount Series 00 on the manifold bases of series 000. When mounting the 00 valve on the 000 manifold, the 00 solenoid must be positioned on the same side of the manifold as a single solenoid 00. (efer to the figure below.) For base mounted style, the port of the port valve flows out the port of manifold base. dapter plate assembly 00(Q) 00 Series ody ported dapter plate assembly 00(Q) 00 Series ase mounted ound head combination screw Gasket ound head combination screw dapter plate Oring pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) lanking late ssembly <Standard> ound head combination screw lanking plate Gasket pplicable manifold base Type SSYJ0 Type SSYJ Type SSYJ0 Type SSYJ Type SSYJ Type SSYJS ound head combination screw lanking plate Gasket ound head combination screw ound head combination screw dapter plate Manifold gasket pplicable manifold base Type SSYJ0(Q) Type SSYJ(Q) Type SSYJ(Q) <CEcomplaint> 000Q 000Q 000Q pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJSQ pplicable manifold base Type SSYJ0Q Type SSYJQ Type SSYJQ Type SSYJSQ SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ (ositioning pin) Dust cap pplicable manifold base Type SSYJ pplicable manifold base Type SSYJQ

86 Series 000 Type 0: Top roted/ssyj0 Stations 00 [ ]: C Grommet (G) pprox. 00 L L x ø. 0. (DIN.).. (DIN.8). 8 [.] 9. [8.]. (DIN 8.).. (DIN.8) 8. [80.9] 0. [.8] 0 (, port) (itch) = 9 0 (, port) uiltin onetouch fitting (Station n) (Station ). [.] 0.. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" (.9) 0 L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO).8 [.] pprox. 00. [.] 0.8. [.] [90.8]. [.] pprox. 00. [.] 0. [] [8] Max g 9. pplicable cable O.D. ø. to ø M8 x efer to page for dimentions with connector cable. Station n L L Station Station 0 9 8

87 Series 000 Type : Top orted/ssyj Stations (00 ) [ ]: C Grommet (G) [.] pprox [8.] pprox. 00. (DIN.).. 8. [.]. L L 0 pprox [.] x ø.. (DIN.8) (itch) = 9. (, port) 8. [.]. (DIN.) (Station n) (Station ). (DIN.8) 8. [8.9] 0. [.8] Max. 0 g. Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, /". pplicable cable O.D. ø. to ø 0 0 uiltin onetouch fitting 9 8. / (, port) (.9) L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO). M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ [.] [.] 9. [9.8]. [.] 0. [] 8.8 [8] efer to page for dimentions with connector cable. Station n L L Station Station

88 Series 000 Type 0: ottom orted/ssyj0 Stations 0 [ ]: C Grommet (G) [.] pprox [8.]. (DIN.). (DIN.) L L (itch) = 9. (Station n) (Station ) 0 x ø.. (DIN.8). (DIN.8) 8. [8.9] 0. [.8] / (, port) pprox []. pprox [.] pplicable cable O.D. ø. to ø g [.]. [.] 9. [9.8]. [.] 0. [] 8.8 [8] [] (itch) = 9 (, port) L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) Max. 0 M8 x efer to page for dimentions with connector cable. Station n L L 0 Station Station

89 Series 000 Type : Side orted/ssyj Stations 0 [ ]: C Grommet (G) 0.8 [80]. [.] pprox [88.].8 (DIN.).8 (For DIN:.) [80]. L L 9 (Station ) 0.8. (itch) = 0 (itch) = 0 (Station n) 9 (DIN.) (, port) 8. [8.] 0. [.8] x ø / (, port) L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO) M8 x SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ.8 [.]. [.] 9. [9.]. [.] 0. [] 8. [8.] pprox [9.] pprox. 00 Max. 0 g pplicable cable O.D. ø. to ø efer to page for dimentions with connector cable. Station n L L Station Station 0 8 0

90 Series 000 C, N Type : Side orted/ssyj Stations C8, N9 [ ]: C Grommet (G) [.] pprox [88.]. (DIN ) L L x ø (DIN.) 8. [8.] 0. [.8] (DIN:.) 9 (itch) = 9 / (, port) (.9) (Station ) (Station n) [8] (itch) = 9 Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO).8 [.] 0.8. [.] [8] 8. 9 [9.]. [.] [] 8. [8.] M8 x pprox. 00 pprox [9.] Max. 0 g pplicable cable O.D. ø. to ø efer to page for dimentions with connector cable. Station n L L Station Station 0 9 9

91 Series 000 Flat ibbon Cable Manifold [ ]: C SSYJ Stations (00 ) pprox [.] 9. [9.]... (Nonlocking) L L (, port) (itch) = 0.. (Station n) (Station ) 0 9. x ø [9.8]. [.].. Triangle mark / (, port) SJ SY SV SZ V S000 VQ VQ 8. [.].. VQ VQC pplicable connector: pins MIL type (Conforming to MILC80) VQZ SQ For builtin onetouch fitting VFS VF VQ Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" (.9) Station n L L Station Station..

92 Series 000 EX0 Gateway System Serial Transmission System SSYJS Stations L L 0 (itch) = 0.. x ø W COM Output no. (Station n) (Station ) (, port) / (, port) For builtin onetouch fitting Onetouch fitting (, port) pplicable tubing O.D.: ø, ø/" ø8, ø/" Connector lock pin Take out when wiring the connector assembly.. Station n Station Station L (.9) L

93 Series 000 EX0 Gateway System Serial Transmission System SSYJS Stations 0 (, port) (itch) = SJ SY SV L L (itch) = 0. 9 x ø. SZ V S VQ VQ VQ VQC VQZ SQ / (, port) VFS VF (Nonlocking) (Station n) (Station ) VQ W COM.8. Connector lock pin Wiring part. Take out when wiring the connector assembly to the housing. Station n Station Station L L

94 Series 000/000 Made to Order (For detailed specifications, delivery and pricing, please contact SMC.) Made to Order ody orted External ilot [Option] pplicable solenoid valve series 0, 0 0 X0 Entry is the same as standard products. Operating ressure ange Ma External ilot ort Operating pressure range 00 ka to 0. Series ilot pressure range 0. to , 000 Dimensions 000: 8 mm 000: 8 mm longer in total length. Q Note) Ctype models that are have DIN terminals only. ort size JIS Symbol ody ported position single position double position closed center position exhaust center position pressure center () () () () () () () () () () () () () () () () () () () () () () () () () X X X X X

95 Series 000/000/000 Made to Order M8 Connector Conforming to IEC09 Standard Made to Order How to Order Valve [Option] S Z U Light/surge voltage suppressor Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) Type of actuation position single solenoid position double solenoid position closed center position exhaust center position pressure center ody ported ase mounted ( port) ase mounted ( port) Series V S ated voltage VDC VDC VDC VDC VDC 0 WO M 0 WO 0 WO ody option 0: ilot valve individual exhaust for the pilot valve port, E port port, E port, port size Thread piping Symbol ort size M M x 0. M 0 Electrical entry pplicable series Onetouch fitting piping (Metric size) Symbol ort size pplicable series C C Onetouch fitting for ø Onetouch fitting for ø C C8 Onetouch fitting for ø Onetouch fitting for ø Onetouch fitting piping (Inch size) Symbol N N N N9 : Common exhaust type for main and pilot valve ort size Onetouch fitting for ø/" Onetouch fitting for ø/" Onetouch fitting for ø/" Onetouch fitting for ø/" WO: Without connector Cable W : Note) With connector Cable pplicable series racket Without bracket F With bracket Note) Do not remove the factory installed bracket from Series 000 with the bracket option. emoval of the bracket will cause the valve to leak. (For manifold use only) ort size Without subplate M 0 0 / Made to Order ody ported external pilot X0 (efer to page.) X0 is not available for Series 000. Q Nonlocking push type D ushturn locking slotted type E ushturn locking lever type Note) Enter the cable length symbol in. lease be sure to fill in the blank referring to page. SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ How to Order ilot Valve ssembly V WO ated voltage DC V S VDC VDC VDC VDC VDC Light/surge voltage suppressor S Z U Without light/surge voltage suppressor With surge voltage suppressor With light/surge voltage suppressor With surge voltage suppressor (Nonpolar type) With light/surge voltage suppressor (Nonpolar type) Electrical entry WO Without connector Cable M8 connector Note) W With connector Cable Note) Enter the cable length symbol in. lease be sure to fill in the blank referring to page. Note) Since V is CEcompliant as standard, the suffix Q is not necessary.

96 Series 000/000/000 Specific roduct recautions e sure to read before handling. efer to front matters 8 and 9 for Safety Instructions and pages to for // ort Solenoid Valve recautions. Warning Manual Override Operation When the manual override is operated, connected equipment will be actuated. Confirm safety before operating. Nonlocking push type [Standard] ress in the direction of the arrow Solenoid Valve for 00, 0 VC Specifications Warning Solenoid valves with grommet and L/M type plug connector C specifications have a builtin rectifier circuit in the pilot section to operate the DC coil. With 00, 0 VC specification pilot valves, this builtin rectifier generates heat when energized. The surface may become hot depending on the energized condition; therefore, do not touch the solenoid valves. ushturn locking slotted type [Type D] While pressing, turn in the direction of the arrow. If it is not turned, it can be operated the same way as the nonlocking type. Caution Locked position When operating the locking type D with a screw driver, turn it gently using a watchmakers screw driver. [Torque: Less than 0. N.m] ushturn locking lever type [Type E] While pressing, turn in the direction of the arrow. If it is not turned, it can be operated the same way as the nonlocking type. Caution Locked position When locking the manual override on the pushturn locking types (D, E), be sure to push it down before turning. Turning without first pushing it down can cause damage to the manual override and trouble such as air leakage, etc. USH USH LOCK LOCK Common Exhaust Type for Main and ilot Valve lug position Type of actuation Number of solenoids Caution ilot air is exhausted through the main valve body rather than directly to atmosphere. Suitable for applications where exhausting the pilot valve to atmosphere would be detrimental to the surrounding working environment. For use in extremely dirty environments where there is the possibility that dust could enter the pilot exhaust and damage the valve. Ensure that the piping of exhaust air is not too restrictive. Series 000/000/000 Mixed Installation of ort and ort Valves on Same Manifold. Caution Series 000/000/000 and Series 00/00/00 can be mounted on the same manifold. How to mount on the same manifold is shown on the following pages. 000, , , 00. If or port valve is used as a port valve Series 000, 000, 000 may be used as a N.C.or N.O. port valve by plugging one of the, ports. e sure not to plug the exhaust ports (). Can be used when a double solenoid, port valve is required. Single Double () port N.C. () () () () () () () () () (JIS symbols above: Series 000) lug lug lug lug port N.O. () () () () () () () ()() () 8

97 Series 000/000/000 Specific roduct recautions e sure to read before handling. efer to front matters 8 and 9 for Safety Instructions and pages to for // ort Solenoid Valve recautions. Caution Core wire crimping area Crimping area Socket Hook How to Use lug Connector. ttaching and detaching connectors To attach a connector, hold the lever and connector unit between your fingers and insert straight onto the pins of the solenoid valve so that the lever s pawl is pushed into the groove and locks. To detach a connector, remove the pawl from the groove by pushing the lever downward with your thumb, and pull the connector straight out. Cover Groove in Cover Groove Connector. Crimping of lead wires and sockets Strip. to. mm at the end of the lead wires, insert the ends of the core wires evenly into the sockets, and then crimp with a crimping tool. When this is done, take care that the coverings of the lead wires do not enter the core wire crimping area. Use an exclusive crimping tool for crimping. (Contact SMC for special crimping tools.) Core wire Lead wire Insulation Hook Lever DC polarity display Socket Lead wire 0. to 0. mm Max. Cover diameter: ø. mm. ttaching and detaching sockets with lead wires ttaching Insert the sockets into the square holes of the connector (, indication), and continue to push the sockets all the way in until they lock by hooking into the seats in the connector. (When they are pushed in, their hooks open and they are locked automatically.) Then confirm that they are locked by pulling lightly on the lead wires. Detaching To detach a socket from a connector, pull out the lead wire while pressing the socket s hook with a stick having a thin tip (approx. mm). If the socket will be used again, first spread the hook outward. in lug Connector Lead Wire Length Caution Standard length is 00 mm, but the following lengths are also available. How to Order Connector ssembly For DC: SY00 0 For 00 VC: SY00 0 For 00 VC: SY00 0 For other voltages of C: SY00 0 Without lead wire: SY00 0 (with connector and of sockets only) How to Order Include the connector assembly part number together with the part number for the plug connector s solenoid valve without connector. Ex.) In case of 000 mm of lead wire For DC For C 0LOM 0LOM SY0000 SY0000 Lead wire length mm 00 mm 000 mm 00 mm 000 mm 00 mm 000 mm 000 mm SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ Socket Connector Hook Lead wire 9

98 Series 000/000/000 Specific roduct recautions e sure to read before handling. efer to front matters 8 and 9 for Safety Instructions and pages to for // ort Solenoid Valve recautions. Caution <For DC> Grommet, L/M lug Connector Standard type (with polarity) Surge voltage suppressor ( S) ed () lack Surge Voltage Suppressor Diode to prevent reverse current Coil With light/surge voltage suppressor ( Z) Diode to prevent reverse current DIN Terminal With surge voltage suppressor (DS) Varistor Coil With light/surge voltage suppressor (DZ) ed () lack Nonpolar type With surge voltage suppressor ( ) ( ) () () ( ) Varistor With light/surge voltage suppressor ( U) ( ) () Varistor () ( ) Connect the standard type in accordance with the, polarity indication. (The nonpolar type can be used with the connections made either way.) Since voltage specifications other than standard and VDC do not have diodes for polarity protection, be careful not to make errors in the polarity. lease use caution regarding the allowable voltage fluctuation because there is about a volt drop for a valve with polarity protection. (For details, refer to the solenoid specifications for the individual valve.) When wiring is done at the factory, positive () is red and negative ( ) is black. With power saving circuit ower consumption is decreased by / by reducing the wattage required to hold the valve in an energized state. (Effective energizing time is over ms at VDC.) Operating rinciple Timer circuit With the above circuit, the current consumption when holding is reduced to save energy. lease refer to the electric wave data to the right. lease be careful not to reverse the polarity, since a diode to prevent the reversed current is not provided for the power saving circuit. lease use caution regarding the Coil Coil Coil Electric circuit (with power saving circuit) LED Diode Coil ed () lack ( ) : Starting current : Holding current (In the case of 0T, the electric wave form of energy saving type) V 0 V 0. W 0. W 0 W pplied voltage ms Standard With power saving circuit allowable voltage fluctuation because there is about a 0. volt drop due to the transistor. (For details, refer to the solenoid specifications for the individual valve.) DIN terminal has no polarity. M8 Connector Standard type (with polarity) With light/surge voltage suppressor ( S) () (Type W) ( ) (Type W) Nonpolar type With surge voltage suppressor ( ) ( )() (Type W) Varistor ()( ) (Type W) (Ground) Diode to prevent reverse current Solenoid valve side pin wiring diagram Type W Coil Coil With light/surge voltage suppressor ( Z) () (Type W) ( ) (Type W) With light/surge voltage suppressor ( U) ( )() (Type W) Varistor ()( ) (Type W) Type W Diode to prevent reverse current For the standard type, connect to and to for Type W according to polarity, while to and to for Type W. lease be careful not to reverse the polarity, since a diode to prevent the reversed current is not provided for DC voltages other than and VDC. lease use caution regarding the allowable voltage fluctuation because there is about a volt drop for a valve with polarity protection. (For details, refer to the solenoid specifications for the individual valve.) The Wtype valve cannot be grounded. Varistor Coil Coil Coil 0

99 Series 000/000/000 Specific roduct recautions e sure to read before handling. efer to front matters 8 and 9 for Safety Instructions and pages to for // ort Solenoid Valve recautions. Surge Voltage Suppressor <For C> (There is no S type because the generation of surge voltage is prevented by a rectifier.) Grommet, L/M lug Connector With light ( Z) DIN Terminal With light (DZ) ( ) ( ) ( ) Varistor Varistor ( ) NL: Neon light Note) Surge voltage suppressor of varistor has residual voltage corresponding to the protective element and rated voltage; therefore, protect the controller side from the surge. The residual voltage of the diode is approximately V. DIN Terminal Type Y Ytype DIN connector is a DIN connector conforming to the 8 mm standard pitch between DIN terminals. Dtype DIN connector with 9. mm pitch between terminals if not interchangeable. DIN connector except Dtype has the N indication at the end of voltage symbol. (In case of DIN connector without light, N is not indicated. lease refer to the name plate to distinguish.) Dimensions are the same as Dtype DIN connector. When exchanging the pilot valve assembly only, V D is interchangeable with V Y. Do not replace V (G, H, L, M, W) to V D/ Y (DIN terminal), or vice versa. Caution How to Use DIN Terminal Connection. Loosen the holding screw and pull the connector out of the solenoid valve terminal block.. fter removing the holding screw, insert a flat head screwdriver, etc. into the notch on the bottom of the terminal block and pry it open, separating the terminal block and the housing.. Loosen the terminal screws (slotted screws) on the terminal block, insert the cores of the lead wires into the terminals according to the connection method, and fasten them securely with the terminal screws.. Secure the cord by fastening the ground nut. Caution When making connections, take note that using other than the supported size (ø. to ø) heavy duty cord will not satisfy I (enclosure) standards. lso, be sure to tighten the ground nut and holding screw within their specified torque ranges. Caution Changing the entry direction fter separating the terminal block and housing, the cord entry can be changed by attaching the housing in the desired direction Coil Coil ( directions at 90 intervals). When equipped with a light, be careful not to damage the light with the cord s lead wires. recautions lug in and pull out the connector vertically without tilting to one side. Compatible cable Cord O.D.: ø. to ø (eference) 0. mm, core or core, equivalent to JIS C 0 Ground nut tightening torque. to. N m Washer Grommet (ubber) (ating symbol) efer to the table below. <Type D> Without light With light ated voltage VDC VDC 00 VC 00 VC 0 VC 0 VC < Type Y> Without light With light ated voltage VDC VDC 00 VC 00 VC 0 VC( VC) 0 VC(0 VC) Voltage symbol V V 00V 00V 0V 0V Circuit Diagram with Light How to Use DIN Terminal Terminal screw ( locations) Tightening torque 0. to 0. N m Caution C circuit NL : Neon light : esister DIN Connector art No. Voltage symbol VN VN 00VN 00VN 0VN 0VN SY00 SY008 Set screw Tightening torque 0. N m Housing (Light mounting location) Terminal block Notch art no. SY000 SY000 SY000 SY000 SY000 SY000 art no. SY0080 SY0080 SY0080 SY0080 SY0080 SY0080 DC circuit LED : Light emitting diode : esister SJ SY SV SZ V S000 VQ VQ VQ VQC VQZ SQ VFS VF VQ