MWD/ Wireline Replacement Parts MS Collar Assembly 13. MWD Miscellaneous 14. Bluestar 15. Running Gear 18. Slide on Centralizers 21
|
|
- Lesley Horn
- 5 years ago
- Views:
Transcription
1 Our Mission: To anticipate and exceed the needs of our customers, through innovative engineering, manufacturing excellence, exceptional customer service and real time turn-key solutions. Table of Contents MWD/ Wireline Replacement Parts 1-12 MS Collar Assembly 13 MWD Miscellaneous 14 Bluestar 15 Running Gear 18 Slide on Centralizers 21 Complete Assembly List 23 Rotatable Connectors, WTIR Rotatable Connectors for Pulser Solenoid & Exact-FIT Replacement Connectors 8 Channel Rotatable For Bluestar Rotatable Connectors, WTI Rotatable Connectors for Pulser Solenoid & Standard 4-Channel Rotatable Connectors 5-Channel Rotatable Connectors & 7-Channel Rotatable Connectors 10 Channel Rotatable connectors
2 MWD/ Wireline Replacement Parts Reference Description Illustration Signal Valve Shaft 17-4HT Signal Valve Shaft with No Built-in Stop 17-4HT Piston Cap (3 Poly Vented) Nit Piston Cap (4 Poly Vented) Nit Pulser Helix End 17-4HT Pulser Helix End, with flats and O- Ring Groove,17-4HT 1
3 Pulser Main Spring Piston Wear Sleeve, 2" Ceramic Mag Zirconia Piston Wear Sleeve, 3" Ceramic Mag Zirconia Poppet Housing 3" Wear Sleeve Poppet Housing 2" Wear Sleeve Poppet Stop Sleeve Naval Brass Screen Housing 2
4 Screen, Large Slots (Optional) SST Screen, Small Slots SST Mud Compensator Housing Compensator Membrane Support Oil Fill Housing Oil Fill Safety Vent Plug, Slotted SST Oil Fill Safety Vent Plug, Hex SST 3
5 Battery/Gamma Pressure Housing, 51.85" Sensor Pressure Housing, 62.75" Battery/Gamma Pressure Housing, 24" Piston Cap (3 Poly Vented) Nit Solenoid Housing, 14.20" Sensor / XXT Pressure Housing, 53.55" Oil Fill Plug / Vent Plug SST 4
6 Pressure Bulkhead Split Shell (Set of 2) Bottom Bulkhead Retainer Top Bulkhead Retainer Male Thread Protector Brass Male Thread Protector, Red Anodized Aluminum Picture Coming Soon! Female Thread Protector, Red Anodized Aluminum 5
7 Interconnect Housing, 8.005" Interconnect Housing, 7.925" Nit Intermodule End, Gamma Intermodule End, MWD Connector, 4-Pin 6-Socket (HT) Connector, 6-Pin 4-Socket (HT) Pigtail, Driver Snubber 6
8 Pigtail, Battery/ Gamma Snubber Pigtail, Sensor Snubber Also Called: Electronics Snubber Pigtail Directional Module Snubber Pigtail Pigtail, Gamma Top, Short Approx 12" OAL Pigtail, Gamma Top, Long Approx 18" OAL Transorb Pigtail, Electronics/Sensor Module Battery Snubber Assembly Sensor/Electronics Snubber 7
9 Intermodule End, Battery Bow Springs, High Profile Inconel Bow Springs, Low Profile Inconel Compression Springs/Low Profile Blades Inconel MWD Centralizer Shaft with O-Ring Groove Modification, Wired with 200C Connectors MWD Centralizer Shaft with O-Ring Groove Modification (Not Wired) Solid Shaft, Centralizer 8
10 Washer Collar, 4-Blade Nit Roll Pin, Spiral, 3/16" x 7/8" Long SST Rubber Bumper Assembly Brass Split Ring Threaded Ring Threaded Ring Nit 50 9
11 " Spacer (Optional) For Rubber Finned Centralizers Naval Brass " Rubber Fin Standard 2.8" OD No charge For modifications Brass " Rubber Fin Standard 3.50" OD No charge for modifications Brass " Rubber Fin Standard 2.8" OD No charge for modifications Brass 11" Rubber Fin 3.5" OD No charge for modifications Brass Fishneck (Spearpoint) Nit Dowel Pin.250" x 1.50" Long SST 10
12 " Muleshoe Collar Assembly 17-4HT " Muleshoe Collar Assembly 17-4HT Cast " / 8" Muleshoe Collar Assembly 17-4HT Cast Wear Cuff, Large, for use with 4.75" and 6.50" MS Assembly 17-4HT Abrasion Ring, Large 17-4HT Abrasion Ring, Small 17-4HT " Muleshoe Key 17-4HT 11
13 " Muleshoe Key 17-4HT " Muleshoe Key 17-4HT Bottom Sleeve, for use with 4.75" and 6.50" MS Assembly 17-4HT Muleshoe Snap Ring/Retainer Ring SST Set Screw 3/8-24 x 1/2" Roll Pin 5/32 x 1" SST 12
14 MS Collar Assy ( SPEC) /4" MS Collar Assembly Pulser Helix Latching " MS Collar Assembly Pulser Helix Latching Retainer Ring Pulser Helix End 17-4HT " Muleshoe Collar Modified for Locking Mechanism 17-4HT Cast " Muleshoe Collar Modified for Locking Mechanism 17-4HT Cast 13
15 MWD Miscellaneous APS Crossover Assembly 14
16 BLUESTAR Male Rotary Connector Housing Pulser Screen Housing Pressure Housing, Pulser Motor 21.34" Pressure Housing, Pulser Driver 18.85" Ball Screw Housing Transition Housing 15
17 Pressure Compensation Housing Pulser Screen SST Poppet Housing Fishneck (Spearpoint) SA Nit C 2 7/8" Barrel End, 4 Fin Thread Protector Plug SA Aluminum Thread Protector Cap SA Aluminum Picture Coming Soon! 16
18 Female Rotary Connector Housing Battery Pressure Housing, 55" Membrane Support Picture Coming Soon! Rotary Connector Male Support Picture Coming Soon! 17
19 RUNNING GEAR Reference Description Illustration Standard Fishing Tool Assembly (Bulldog Latch, Overshot) J-Latch Assembly On/Off Latch Assembly Fishing Tool Clevis Assembly With Safe-Lock Latch " Rope Socket Slick Line Assembly (.092") Swivel Assy. 1.75" 18
20 Aluminum Spacer Bar, 5' Brass Spacer Bar, 5' Spang Jar Muleshoe Stinger Assembly 1.75" Lifting Bail Assembly Alignment Wrench, Muleshoe OAL 22" HD Muleshoe Alignment Tool OAL 34" 19
21 Aluminum Jack Stand Alignment Tool MWD Centralizer Assembly 20
22 Slide on Centralizers Centralizer Assy, Slide On/Clamp On, 3.30" Rubber Fin, 1.75" Dia, RevA Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.75" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assy for 1.75" OD Rubber Ferrule for Slide On/Clamp On, 3.30" Rubber Fin Assy for 1.75" Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.875" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assembly for 1.875" OD 21
23 Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.875" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assy for 1.875" OD Rubber Ferrule for Slide On/Clamp On, 3.30" Rubber Fin Assembly for 1.875" OD Slide On/Clamp On 3.30" Rubber Fin Centralizer Assembly for 1.69" OD Compression Ferrule, Peek 1.69" Dia 22
24 Lower End Assemblies 1 pc Poppet Housing 3 Bore () pc Helix w/flat (17-4) pc Signal Valve Shaft (17-4 HT) pc Abrasion Ring (17-4 HT) pc Piston Cap w/short hex (Nit 50) (optional) GE Pulser Driver Housing Assemblies 1 pc Solenoid Pressure Housing 14.2 () 1 pc Pulser Pressure Housing () pc Intermodule End (No Holes) () pc Pressure Bulkhead, OFS () pc Oil Fill Housing () pc Screen Housing () pc Mud Compensator Housing () pc Support Compensator Housing () Electronic Housing Assemblies 1 pc Sensor Pressure Housing () pc Interconnect Housing () pc Intermodule End (No holes) () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) 2 pc Male Thread Protector (Red Anodize) pc Split Shell Set ()
25 Battery Housing Assemblies 1 pc Battery Pressure Housing () pc Interconnect Housing () pc Intermodule End (No holes) () pc Battery Intermodule End () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) pc Pigtail Aadapter pc Split Shell Set () pc Male Threaded Protector (Red Anodize) Gamma Housing Assemblies 1 pc Gamma Pressure Housing 24.0 () pc Interconnect Housing () pc Intermodule End (No Holes) () pc Gamma Intermodule End () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) pc Pigtail Adapter pc Split Shell Set () pc Male Threaded Protector ( Red Anodize)
26 HOUSTON (Main Office) Oil Center Blvd. Houston, TX Phone: Toll Free: Fax:
2014 Product Catalog.
www.wtechnologylink.com 2014 Product Catalog 19515 Oil Center Boulevard, Houston, TX, 77073 Phone: 281-209-9111 Toll Free Sales: 1-888-592-2996 (USA) Fax: 281-209-9191 Email: sales@wtechnologylink.com
More informationMWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
More informationMINING & DRILLING PRODUCTS. P Core Retrieval System
MINING & DRILLING PRODUCTS P Core Retrieval System CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube
More informationMINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
More informationMINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More informationMINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationContinuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More information2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
More informationPNEUMATIC TOOL PARTS LIST
PNEUMATIC TOOL PARTS LIST FINISH NAILER 2014 03 11 Model NT 65M2 (E2a) 1 PARTS CODE DESCRIPTION 1 949657 HEX. SOCKET HD. BOLT M6X12 (10 PCS.) 1 2 880515 PLATE 1 3 885673 TOP COVER 1 (GLAY) 3A 886740 TOP
More informationBALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS
PARTS MANUAL BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX:
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MINI RACK OVEN OV310G ML-132515 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 (October 2011) Table of Contents 3 ADVANCED CONTROL
More informationRK-33 BRUSH CUTTER - FIG 1
BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028
More informationRL-D40 PARTS LIST # H USE THIS PARTS LIST FOR:
RL-D40 PARTS LIST # 102689H USE THIS PARTS LIST FOR: Hoist Serial Number 24815 to For older hoists use the following: Parts List No. 102689E for Serial Number 17062 to 24814 Parts List No. 102689C for
More informationReceiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System
Receiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System Does your Hitch need an upgrade? Quic n Easy Call with your Extends to 7. Swings to 12. Year, Make & Model Fits
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationSTUD WELDING EQUIPMENT & ACCESSORIES CATALOG
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212
More informationEasy Cover. Parts Lists Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1 Easy Cover s Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 00-- www.aeroindustries.com Indianapolis,
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationSST Series Sand Media Filtration Systems
SST Series Sand Media Filtration Systems Kits and Spare Parts Listing LS-695 (Rev. 6 / 07) Page 1 SST SAND FILTERS Installation Profile Automatic Systems WLS-594B(REV.11/03) Installation Configurations
More informationMAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
More information... TX-L MODEL NUMBER CONTENTS 2-3 BODY. 4-6 HOOD ASSEMBLY IGNITION ASSEMBLY. 8-9 SEAT ASSEMBLY STEERING ASSEMBLY.
.. ~ : l~ :;~, ~ 0 J-I-'olaris I I '. ... TX-L MODEL NUMBER 080639 CONTENTS BODY. HOOD ASSEMBLY IGNITION ASSEMBLY. SEAT ASSEMBLY... STEERING ASSEMBLY. CHAINCASE ASSEMBLY. DRIVE CLUTCH. DRIVEN CLUTCH. DRIVE
More informationTruCourse Retrievable Pulser. Maintenance Manual
TruCourse Retrievable Pulser Maintenance Manual 500770 C January 2016 Intellectual Property Notice Tolteq is a trademark of Tolteq Group, LLC. Other trademarks may be used in this document. Tolteq disclaims
More informationF3 Dual Tower Trainer F3DTT
F3AT TOWER BOM (Quantities shown in table on the left are for (1) Tower. Actual quantity per machine is double.) PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-0020 1 7/16-14 UNC x 5 Bolt 01-1331
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationLiftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationWRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL D340 MIXER (INCLUDES MOTOR PARTS) D340 D340C ML-134254 ML-134257 PRIOR MLS COVERED IN THIS CATALOG D340 ML-134185 D340C ML-134188 D340 W/O Brake ML-104483 D340 W/Brake
More informationColVic Tanker Fittings
Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationHighline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1
Highline Manufacturing TopGun 1999 Page 1 A. Table of Contents A. TABLE OF CONTENTS... 1 B. ASSEMBLY & INSTALLATIONS... 3 1. FLAIL DRUM ASSEMBLY... 3 2. FLAIL DRUM INSTALLATION... 4 3. FEED ROLLER ASSEMBLY...
More informationMOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationForm No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.
MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series
More informationP-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationAutomatic Lawn Tractor Model Series 600
Illustrated Parts Manual Automatic Lawn Tractor Model Series 600 MTD LLC, P.O. BOX 6 CLEVELAND, OHIO 6-009 Printed In USA Form No. 69-09 (January 8, 008) -Style Fender, Deck Lift & Seat 6 6 0 8 On some
More informationPart number: (X1361-) Description: Conduit Duraflex;.218 O.D. Coiled construction; H.D.P.E. jacket only, unlined.
Part number: 30133-1 (X0315-) Description: Conduit - Light Duty 3 series;.26 O.D. Stranded construction; H.D.P.E. Jacket, H.D.P.E. liner. sizes. Part number: 52020041 (X0321-) Description: Conduit Light
More informationGT21 String Trimmer UT Page 1 of 16 Accessories
GT21 String Trimmer UT-26051 Page 1 of 16 Accessories GT21 String Trimmer UT-26051 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 PS00997 1 STRAP?3 UP03075 1 DECAL
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationPART # DESCRIPTION OIL HOUSINGS PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO
PART # DESCRIPTION OIL HOUSINGS 11-00069 PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) 11-00070 PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO STATION) PITCH INSERTS 10-10010 PITCH INSERT #24 10-10012
More informationModel 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual
Model 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual WPI WELLKIN Inc. 8401 Industrial Dr. Pearland, TX 77584 PH: (281) 992-2064 FX: (281) 992-2076 E-mail: sales@wpiwellkin.com
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV310G MINI RACK OVEN ML-132515 OV310G A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 Rev. D (January 2018) F-43242 Rev. D (January
More informationBALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS
PARTS MANUAL BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306)
More informationRUNNING FLOOR II DXE
RUNNING FLOOR II DXE KEITH Manufacturing Co. www.keithwalkingfloor.com World Headquarters Toll-Free: 800-547-6161 Phone: 541-475-3802 Fax: 541-475-2169 10002001 Parts Catalog 2018 KEITH Manufacturing Co.
More informationLF-72 PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-501 RETURN TO MAIN INDEX PARTS LIST FOR P-501 P-501-A P-501-A ILLUSTRATION
More informationAIR HYDRAULIC PUMP SIDE VIEW
Parts List for: form No. 101260 PA462 PA464 PA464-5R AIR HYDRAULIC PUMP SIDE VIEW 7 Basic Pump Ass'y See sheet 2 of 4. 1 6 5 2 4 Item Part No. Item Part No. No. No. Req d Description No. No. Req d Description
More informationSTRIP NAILER. Model NR 90AD (E3) LIST NO. E016 38A 16A 37A 18A 41A 19A 40A 38A 46B 47A 76A 96 46A 75A 24A 23A 48A 68A 50A 32B 51A 32A 52A 53B 53A 54A
5A 28A 48A 24A 29A 35A 59A 58A 57A 56A 55A 54A 53A 52A 46B 47A 50A 41A 37A 39 73A 79B 85A 81A 20 44 45 38 49 51A 34A 89A 506 501 505 1 2 3 4 6 7 8 9 10 11 12 13A 14 15 16 17 18 19 20 91 22 23 25 1 27 29
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationAIRSHIRZ PARTS PART # DESCRIPTION
100315 POWER UNIT, POULTRY, XXLARGE CYLINDER 108171 POWER UNIT LARGE CYLINDER 108172 POWER UNIT SMALL CYLINDER 108476 POWER UNIT X-LARGE CYLINDER 108723 POWER UNIT XXLARGE CYLINDER 102473 BLADE ASSY, TABLE
More informationCATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO
CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC ML-136043 208/240 V. 8.5kW ML-136045 480 V. 8.5kW 3-PAN PRO ML-136037 208/240 V. 9.25kW ML-136044 480 V. 9.25kW ML-152030 3-PAN LWE 5-PAN BASIC
More informationINDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
More information1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationPARTS LIST WRANGLER 2016 AE, AB, DB
PARTS LIST WRANGLER 2016 AE, AB, DB 1 ITEM PART NO. DESCRIPTION QTY. 101 2397081 MOTOR HOUSING 1 102 9120790 10 X 5/8 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 10] 4 103 2397991 WATER SOLENOID 24 VOLT
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationModels: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationPARTS ORDERING INFORMATION
RP-268 REPAIR PARTS FOR VE268 Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order and send
More informationForm No , 9 5, 6. Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP. Max. Capacity: 10,000 PSI
Form No. 101249 Parts List for: X1A1 AIR DRIVEN WITH REMOTE CONTROL HYDRAULIC PUMP Max. Capacity: 10,000 PSI Air Motor Assembly See sheet 3 of 6 13 12 1 11 10 8, 9 Basic Pump Assembly See sheet 4 of 6
More informationPARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG
PARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG CONTROL PANEL ASSEMBLY 101 1394151 ROUND POWER SWITCH 1 102 0693141 RUBBER SWITCH BOOT 2 103 9122465.516 I.D. X.813 O.D. X.027/.030 THICK FLAT
More informationELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 1000048 PE55TWP PE55TWP-220 MODEL D ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI See Back Sheet 5 of 8 1 13 2,3 11 OFF ON WARNING 6 4,5 0IL 7 VALVE DETAIL TORQUE SPOOL
More informationPARTS LIST MODEL M-1 - PIG
PARTS LIST MODEL M-1 - PIG FAN HOUSING ITEM PART NO. PART DESCRIPTION QTY. 101 1090601 DECAL KIT - M-1 PIG 1 102 2590019 SWIVEL COUPLING ASSEMBLY - INCLUDES: 1 102A 2590111 HOSE COUPLING GASKET 1 103 1092519
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationALL PLANT & MIN TILL DRILL
4000 SERIES ALL PLANT & MIN TILL DRILL OWNER S MANUAL ADDENDUM OPERATION MAINTENANCE REPAIR PARTS #608869 (03-08) 2 Table of Contents Precision Planting Metering System 5-9 Precision Planting Introduction
More informationControl Panel Assembly Model : " Marathon 2000 (20 Gallon) - Series H
Control Panel Assembly Model :990 " Marathon 000 (0 Gallon) - Series H Page- 7 9 0 7 9 0 Number Description Qty Req. 077 NUT-FINISHED HEX #0- (ZP) 070 SWITCH ROCKER (9-) PLUG-HOLE (ZINC) / DIA 0 NUT-HEX.LOCK(KEPS)
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationFC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S
SPARE PARTS CATALOG FC-S3 FC-5 FC-3 FC-TD FC-AP FC-LD FC-S FC SERIES BREWERS FC-TS TABLE OF CONTENT Base Assemblies Pages 3-5 Cover Assemblies Pages 6-7 Tank Assemblies Pages 8-13 Fill Tube Assembly Page
More informationMAIN FRAME 85-G
MAIN FRAME 85-G80-6599-00 PART # DESCRIPTION QTY 99-280-7005-03 1/4-20 X 3/4 H.H. 1 99-280-7006-01 #10-32 X 3/8 SHCS SST. 25 99-280-7006-04 1/4-20 X 3/4 SHCS SST. 3 99-280-7006-05 1/4-20 X 1 SHCS SST 2
More informationVolvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112
Volvo - Product Code 100,1,2, 4, 6, 7, 8, 9, 10 & 112 Item Description Product_ Code On Hand Qty 20460353 TEMPERATURE SENSOR 100 1 3854260 DISTRIBUTOR 100 1 3854001 COIL 100 1 876839 GASKET KIT 100 1 70326595
More informationK & KRM-Series Liftgate Terminology
K & KRM Series K & KRM Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
More informationCalle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
More informationParts Manual 400A. Band Sawing Machine
Parts Manual 400A Serial No: 595-10101 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning your
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationRL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationMK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
More informationK&T Saw Shop or
11-600076 SUPER PRO 125C 01/77 to 06/77 IPL 92219-R1 Page 1 of 22 Accessories www.ktoutdoor.com 11-600076 SUPER PRO 125C 01/77 to 06/77 IPL 92219-R1 Page 2 of 22 Accessories 64797 Wrench - Spark plug 61040
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL C ELECTRIC HYDRAULIC PUMP
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationSAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationTornado [Nov. 20, 2012]/Year 2000-Current: Schematics, Accessories, Brochures, Replacement & Optional Items/Carpet Care/Marathon 800, 1200 & 2000
Tornado [Nov. 20, 2012]/Year 2000-Current: Schematics, Accessories, Brochures, Replacement & Optional Items/Carpet Care/Marathon 800, 1200 & 2000 Carpet Extractors/98190 22" Marathon 2000 (20 Gallon) -
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299661 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationMacro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL LT1 DISHWASHER ML-104239 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18581 Rev. B (October 2005) Table of Contents 3 CHEMICAL DETECTION BOX 5 CONTROL
More information