2014 Product Catalog.
|
|
|
- Marion Harrell
- 6 years ago
- Views:
Transcription
1 Product Catalog Oil Center Boulevard, Houston, TX, Phone: Toll Free Sales: (USA) Fax:
2 Our Mission: To anticipate and exceed the needs of our customers, through innovative engineering, manufacturing excellence, exceptional customer service and real time turn-key solutions. Table of Contents MWD/ Wireline Replacement Parts 1-12 MS Collar Assembly 13 MWD Miscellaneous 14 Bluestar 15 Running Gear 18 Slide on Centralizers 21 Complete Assembly List 23 Rotatable Connectors, WTIR Rotatable Connectors for Pulser Solenoid & Exact-FIT Replacement Connectors 8 Channel Rotatable For Bluestar Rotatable Connectors, WTI Rotatable Connectors for Pulser Solenoid & Standard 4-Channel Rotatable Connectors 5-Channel Rotatable Connectors & 7-Channel Rotatable Connectors 10 Channel Rotatable connectors
3 MWD/ Wireline Replacement Parts WTI P/N Reference Description Illustration Signal Valve Shaft 17-4HT Signal Valve Shaft with No Built-in Stop 17-4HT Piston Cap (3 Poly Vented) Nit Piston Cap (4 Poly Vented) Nit Pulser Helix End 17-4HT Pulser Helix End, with flats and O- Ring Groove,17-4HT 1
4 Pulser Main Spring Piston Wear Sleeve, 2" Ceramic Mag Zirconia Piston Wear Sleeve, 3" Ceramic Mag Zirconia Poppet Housing 3" Wear Sleeve Poppet Housing 2" Wear Sleeve Poppet Stop Sleeve Naval Brass Screen Housing 2
5 Screen, Large Slots (Optional) SST Screen, Small Slots SST Mud Compensator Housing Compensator Membrane Support Oil Fill Housing Oil Fill Safety Vent Plug, Slotted SST Oil Fill Safety Vent Plug, Hex SST 3
6 Battery/Gamma Pressure Housing, 51.85" Sensor Pressure Housing, 62.75" Battery/Gamma Pressure Housing, 24" Piston Cap (3 Poly Vented) Nit Solenoid Housing, 14.20" Sensor / XXT Pressure Housing, 53.55" Oil Fill Plug / Vent Plug SST 4
7 Pressure Bulkhead Split Shell (Set of 2) Bottom Bulkhead Retainer Top Bulkhead Retainer Male Thread Protector Brass Male Thread Protector, Red Anodized Aluminum Picture Coming Soon! Female Thread Protector, Red Anodized Aluminum 5
8 Interconnect Housing, 8.005" Interconnect Housing, 7.925" Nit Intermodule End, Gamma Intermodule End, MWD Connector, 4-Pin 6-Socket (HT) Connector, 6-Pin 4-Socket (HT) Pigtail, Driver Snubber 6
9 Pigtail, Battery/ Gamma Snubber Pigtail, Sensor Snubber Also Called: Electronics Snubber Pigtail Directional Module Snubber Pigtail Pigtail, Gamma Top, Short Approx 12" OAL Pigtail, Gamma Top, Long Approx 18" OAL Transorb Pigtail, Electronics/Sensor Module Battery Snubber Assembly Sensor/Electronics Snubber 7
10 Intermodule End, Battery Bow Springs, High Profile Inconel Bow Springs, Low Profile Inconel Compression Springs/Low Profile Blades Inconel MWD Centralizer Shaft with O-Ring Groove Modification, Wired with 200C Connectors MWD Centralizer Shaft with O-Ring Groove Modification (Not Wired) Solid Shaft, Centralizer 8
11 Washer Collar, 4-Blade Nit Roll Pin, Spiral, 3/16" x 7/8" Long SST Rubber Bumper Assembly Brass Split Ring Threaded Ring Threaded Ring Nit 50 9
12 " Spacer (Optional) For Rubber Finned Centralizers Naval Brass " Rubber Fin Standard 2.8" OD No charge For modifications Brass " Rubber Fin Standard 3.50" OD No charge for modifications Brass " Rubber Fin Standard 2.8" OD No charge for modifications Brass 11" Rubber Fin 3.5" OD No charge for modifications Brass Fishneck (Spearpoint) Nit Dowel Pin.250" x 1.50" Long SST 10
13 " Muleshoe Collar Assembly 17-4HT " Muleshoe Collar Assembly 17-4HT Cast " / 8" Muleshoe Collar Assembly 17-4HT Cast Wear Cuff, Large, for use with 4.75" and 6.50" MS Assembly 17-4HT Abrasion Ring, Large 17-4HT Abrasion Ring, Small 17-4HT " Muleshoe Key 17-4HT 11
14 " Muleshoe Key 17-4HT " Muleshoe Key 17-4HT Bottom Sleeve, for use with 4.75" and 6.50" MS Assembly 17-4HT Muleshoe Snap Ring/Retainer Ring SST Set Screw 3/8-24 x 1/2" Roll Pin 5/32 x 1" SST 12
15 MS Collar Assy ( SPEC) /4" MS Collar Assembly Pulser Helix Latching " MS Collar Assembly Pulser Helix Latching Retainer Ring Pulser Helix End 17-4HT " Muleshoe Collar Modified for Locking Mechanism 17-4HT Cast " Muleshoe Collar Modified for Locking Mechanism 17-4HT Cast 13
16 MWD Miscellaneous WTI P/N APS Crossover Assembly 14
17 BLUESTAR WTI P/N Male Rotary Connector Housing Pulser Screen Housing Pressure Housing, Pulser Motor 21.34" Pressure Housing, Pulser Driver 18.85" Ball Screw Housing Transition Housing 15
18 Pressure Compensation Housing Pulser Screen SST Poppet Housing Fishneck (Spearpoint) SA Nit C 2 7/8" Barrel End, 4 Fin Thread Protector Plug SA Aluminum Thread Protector Cap SA Aluminum Picture Coming Soon! 16
19 Female Rotary Connector Housing Battery Pressure Housing, 55" Membrane Support Picture Coming Soon! Rotary Connector Male Support Picture Coming Soon! 17
20 RUNNING GEAR WTI P/N Reference Description Illustration Standard Fishing Tool Assembly (Bulldog Latch, Overshot) J-Latch Assembly On/Off Latch Assembly Fishing Tool Clevis Assembly With Safe-Lock Latch " Rope Socket Slick Line Assembly (.092") Swivel Assy. 1.75" 18
21 Aluminum Spacer Bar, 5' Brass Spacer Bar, 5' Spang Jar Muleshoe Stinger Assembly 1.75" Lifting Bail Assembly Alignment Wrench, Muleshoe OAL 22" HD Muleshoe Alignment Tool OAL 34" 19
22 Aluminum Jack Stand Alignment Tool MWD Centralizer Assembly 20
23 Slide on Centralizers WTI P/N Centralizer Assy, Slide On/Clamp On, 3.30" Rubber Fin, 1.75" Dia, RevA Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.75" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assy for 1.75" OD Rubber Ferrule for Slide On/Clamp On, 3.30" Rubber Fin Assy for 1.75" Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.875" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assembly for 1.875" OD 21
24 Slide On/Clamp On 3.30" Rubber Fin Centralizer Assy for 1.875" OD Slide On/Clamp On 3.80" Rubber Fin Centralizer Assy for 1.875" OD Rubber Ferrule for Slide On/Clamp On, 3.30" Rubber Fin Assembly for 1.875" OD Slide On/Clamp On 3.30" Rubber Fin Centralizer Assembly for 1.69" OD Compression Ferrule, Peek 1.69" Dia 22
25 Lower End Assemblies 1 pc Poppet Housing 3 Bore () pc Helix w/flat (17-4) pc Signal Valve Shaft (17-4 HT) pc Abrasion Ring (17-4 HT) pc Piston Cap w/short hex (Nit 50) (optional) GE Pulser Driver Housing Assemblies 1 pc Solenoid Pressure Housing 14.2 () 1 pc Pulser Pressure Housing () pc Intermodule End (No Holes) () pc Pressure Bulkhead, OFS () pc Oil Fill Housing () pc Screen Housing () pc Mud Compensator Housing () pc Support Compensator Housing () Electronic Housing Assemblies 1 pc Sensor Pressure Housing () pc Interconnect Housing () pc Intermodule End (No holes) () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) 2 pc Male Thread Protector (Red Anodize) pc Split Shell Set ()
26 Battery Housing Assemblies 1 pc Battery Pressure Housing () pc Interconnect Housing () pc Intermodule End (No holes) () pc Battery Intermodule End () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) pc Pigtail Aadapter pc Split Shell Set () pc Male Threaded Protector (Red Anodize) Gamma Housing Assemblies 1 pc Gamma Pressure Housing 24.0 () pc Interconnect Housing () pc Intermodule End (No Holes) () pc Gamma Intermodule End () pc Bulkhead 90 Degree () (Optional) 1 pc Bulkhead 45 Degree () (Optional) pc Pigtail Adapter pc Split Shell Set () pc Male Threaded Protector ( Red Anodize)
27 Rotatable Connectors WTIR Rotatable Connectors For Pulser Solenoid Channel Male 6P/4S Bulkhead Connector (replaceable canted spring contacts on pin) RTV or Epoxy potting Mates with Female Connector Channel Male 6P/4S Bulkhead Connector Same as except NO POTTING. (uses mechanical clamp) Channel Female Solenoid Connector (smooth-bore contacts Inside socket) Mates with and Exact-FIT Replacement Connectors Channel Male 6P/4S Bulkhead Connector. Exact-fit replacement for OEM. (pin is smooth) Mates with Female Connector Channel Male X 6P/4S Bulkhead Connector. Same as except NO POTTING. (uses mechanical clamp)mates with Female Connector Channel Female Solenoid Connector. Exact-fit Replacement for OEM. (leaf-contacts inside socket) Mates with and
28 8 Channel Rotatable For Bluestar WTI P/N Channel Male 6P/4S Bulkhead Connector. Exact-fit replacement for Bluestar OEM. (replaceable canted spring contacts on pin) Mates with Female Connector Channel Male 6P/4S Bulkhead Connector. Same as except NO POTTING. (uses mechanical clamp) Mates with Female Connector Channel Female Connector Exact-fit replacement for Bluestar OEM. (smooth-bore contacts; solder cups on back) Mates with and Channel Male Connector for Tool Interconnect; Exact-fit replacement for Bluestar OEM (wire leads only) Mates with Channel Female Connector for Tool Interconnect Exact-fit Replacement for Bluestar OEM (wire leads only) Mates with
29 Rotatable Connectors WTI Rotatable Connectors For Pulser Solenoid Channel Male Driver Connector Exact-fit replacement for Newsco/Telemetrix (canted-spring contacts) Mates with Channel Female Driver Connector. Exact-fit replacement for Newsco/Telemetrix (20ksi bulkhead w/ 15-pin MDM pigtail). Mates with Standard 4-Channel Rotatable Connectors Channel Male Connector, (canted springs, wire leads only) Used in & Mates with Channel Male Connector, (smooth pin, wire leads only) Used in & Mates with Channel Male Connector, (smooth pin, wire leads only) Mates with or Channel Female Connector, (leaf-contacts inside socket, wire leads only) Mates with or
30 5-Channel Rotatable Connectors WTI P/N Channel Male Connector, (smooth pin, wire leads only) Mates with (ASK SALES FOR DETAILS) Channel Female Connector, (leaf-contacts inside socket, MDM9 on back) (ASK SALES FOR DETAILS) 7-Channel Rotatable Connectors Channel Male Connector Mates with (ASK SALES FOR DETAILS) Channel Female Connector Mates with
31 10 Channel Rotatable connectors WTI P/N Channel Male Connector (Ø.75 x.47" smooth pin, wire leads only) Mates with (ASK SALES FOR DETAILS) Channel Female Connector, (leaf-contacts inside socket, MDM15 on back) Mates with (ASK SALES FOR DETAILS) Most parts are maintained in stock. Please call for availability due to large number of customers that utilize these products. This parts list is considered proprietary to W-Technology Link. Please do not reproduce or provide information to any third party. Revised:
32 HOUSTON (Main Office) Oil Center Blvd. Houston, TX Phone: Toll Free: Fax:
MWD/ Wireline Replacement Parts MS Collar Assembly 13. MWD Miscellaneous 14. Bluestar 15. Running Gear 18. Slide on Centralizers 21
Our Mission: To anticipate and exceed the needs of our customers, through innovative engineering, manufacturing excellence, exceptional customer service and real time turn-key solutions. Table of Contents
MWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
MINING & DRILLING PRODUCTS. P Core Retrieval System
MINING & DRILLING PRODUCTS P Core Retrieval System CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube
MINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
MINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
MINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
H Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
Continuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
Form 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212
CONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
AF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
Plumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
JOHN DEERE 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West
BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS
PARTS MANUAL BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX:
Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
Magnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
Receiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System
Receiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System Does your Hitch need an upgrade? Quic n Easy Call with your Extends to 7. Swings to 12. Year, Make & Model Fits
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
2" (50MM) ROTARY HAMMER
" (50MM) ROTARY HAMMER MODEL HR5000 05-03 75 7 70 80 39 3 4 5 6 7 8 63 58 59 60 6 57 56 55 54 3 53 5 5 4 5 6 7 8 9 0 3 4 4 4 43 44 45 46 47 48 49 50 38 37 40 5 6 7 36 35 34 33 3 3 8 9 30 99 84 85 83 8
GT21 String Trimmer UT Page 1 of 16 Accessories
GT21 String Trimmer UT-26051 Page 1 of 16 Accessories GT21 String Trimmer UT-26051 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 PS00997 1 STRAP?3 UP03075 1 DECAL
Model 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual
Model 58-93R Tubing Power Tong Installation, Operation, Service and Parts Book Manual WPI WELLKIN Inc. 8401 Industrial Dr. Pearland, TX 77584 PH: (281) 992-2064 FX: (281) 992-2076 E-mail: sales@wpiwellkin.com
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
A Resource for Semiconductor Manufacturers Illustrated Parts Guide for Axcelis GSD 200E² 160V
Illustrated Parts Guide for Axcelis GSD 00E² 0V GSD Water Cooled & Non-Water Cooled Bushing and Liner Flange Upgrades Pgs. - Source Body Components Non-Vaporizer / Vaporizer Pgs. -0 Extraction Electrode
PARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MINI RACK OVEN OV310G ML-132515 A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 (October 2011) Table of Contents 3 ADVANCED CONTROL
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
Easy Cover. Parts Lists Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1 Easy Cover s Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 00-- www.aeroindustries.com Indianapolis,
Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
MK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
PNEUMATIC TOOL PARTS LIST
PNEUMATIC TOOL PARTS LIST FINISH NAILER 2014 03 11 Model NT 65M2 (E2a) 1 PARTS CODE DESCRIPTION 1 949657 HEX. SOCKET HD. BOLT M6X12 (10 PCS.) 1 2 880515 PLATE 1 3 885673 TOP COVER 1 (GLAY) 3A 886740 TOP
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL D340 MIXER (INCLUDES MOTOR PARTS) D340 D340C ML-134254 ML-134257 PRIOR MLS COVERED IN THIS CATALOG D340 ML-134185 D340C ML-134188 D340 W/O Brake ML-104483 D340 W/Brake
... TX-L MODEL NUMBER CONTENTS 2-3 BODY. 4-6 HOOD ASSEMBLY IGNITION ASSEMBLY. 8-9 SEAT ASSEMBLY STEERING ASSEMBLY.
.. ~ : l~ :;~, ~ 0 J-I-'olaris I I '. ... TX-L MODEL NUMBER 080639 CONTENTS BODY. HOOD ASSEMBLY IGNITION ASSEMBLY. SEAT ASSEMBLY... STEERING ASSEMBLY. CHAINCASE ASSEMBLY. DRIVE CLUTCH. DRIVEN CLUTCH. DRIVE
RL-D40 PARTS LIST # H USE THIS PARTS LIST FOR:
RL-D40 PARTS LIST # 102689H USE THIS PARTS LIST FOR: Hoist Serial Number 24815 to For older hoists use the following: Parts List No. 102689E for Serial Number 17062 to 24814 Parts List No. 102689C for
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
SST Series Sand Media Filtration Systems
SST Series Sand Media Filtration Systems Kits and Spare Parts Listing LS-695 (Rev. 6 / 07) Page 1 SST SAND FILTERS Installation Profile Automatic Systems WLS-594B(REV.11/03) Installation Configurations
PARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
FIRST ORDER. 1 3/8" NPT Electric Solenoid Valve 12-VDC Air PN: JFSV Arduino Mega 2560 R3 PN: DEV IMU Digital Combo Board PN: SEN-10121
Qnty. Description FIRST ORDER 1 3/8" NPT Electric Solenoid Valve 12-VDC Air PN: JFSV00006 1 Arduino Mega 2560 R3 PN: DEV-11061 1 IMU Digital Combo Board PN: SEN-10121 SECOND ORDER 20 Nylon ball joint rod
PART # DESCRIPTION OIL HOUSINGS PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO
PART # DESCRIPTION OIL HOUSINGS 11-00069 PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) 11-00070 PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO STATION) PITCH INSERTS 10-10010 PITCH INSERT #24 10-10012
Illustrated Parts Guide for Quantum II / III Source
Illustrated Parts Guide for Quantum II / III Source End Station, Pgs.-0 Source Assembly Pgs.- Flight Tube / MRS Assembly Pg. Plasma Flood Assembly Pg. Extraction Assembly Pg. PO Box Leander, TX USA -0
Gelcoat Fluid Section
3102-00-01 Fluid Section MAGNUM VENUS PRODUCTS Maintenance & Repair Manual Part No. M3102-00-01 Revision 05.30.01 Maintenance & Repair Manual Fluid Section Module MVP Venus Phone: (253) 854-2660 (800)
INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
MAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
Automatic Lawn Tractor Model Series 600
Illustrated Parts Manual Automatic Lawn Tractor Model Series 600 MTD LLC, P.O. BOX 6 CLEVELAND, OHIO 6-009 Printed In USA Form No. 69-09 (January 8, 008) -Style Fender, Deck Lift & Seat 6 6 0 8 On some
Calle Quilla 140 Urb. San Juan Bautista de Villa, Chorrillos, Lima 09-Perú T (511) / /
REPORT BY: Taylor, Angela 29 MAY 2014 Page: 1 OF 3 PART DESCRIPTION PART NUMBER: DRAWING NO: 1283541 PUMP ASSEMBLY; L0918BCD GI, LH, W/1 1/2 DU500014241 REVISION: L NPT X 1 NPT FLUID END, CARBOX. NITRILE
XV. Parts. Mobile Climate Control 303
XV. Parts Mobile Climate Control 303 MCC Reference Manual 2014 XV.1. Valves and O-Rings Heater Solenoids Valve 26-0348 26-0330 26-0194 Heater solenoid valve 24V 3/4 3 way 26-0348 Heater solenoid valve
RK-33 BRUSH CUTTER - FIG 1
BRUSH CUTTER - FIG 1 BRUSH CUTTER - FIG 2 BRUSH CUTTER - FIG 3 BRUSH CUTTER - FIG 1 150 2090198 ANGLE TRANSMISSION 73.38 150-1 2820020 GEAR HOUSING 10.69 150-2 2200029 SPIRAL BEVEL GEAR 7.05 150-3 2200028
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
Auto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
SSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
RUNNING FLOOR II DXE
RUNNING FLOOR II DXE KEITH Manufacturing Co. www.keithwalkingfloor.com World Headquarters Toll-Free: 800-547-6161 Phone: 541-475-3802 Fax: 541-475-2169 10002001 Parts Catalog 2018 KEITH Manufacturing Co.
Liftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
Blade and Off Truck Kit
Fisher Engineering 50 Gordon Drive, Rockland, Maine 081 2139 www.fisherplows.com 90750, 90800, 90850, 90900 93800, 93900, 97200, 97300 97250(CH), 97250-1(CH) September 15, 2016 Lit. No. 1776, Rev. 02 Blade
MK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
Parts Manual 400A. Band Sawing Machine
Parts Manual 400A Serial No: 595-10101 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning your
MODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
Blade and Off Truck Kit
Fisher Engineering 90750, 90800, 90850, 90900, 93800 93900, 97200-1, 97250-2(CH), 97300-1 50 Gordon Drive, Rockland, Maine 081 2139 www.fisherplows.com July 15, 2018 Lit. No. 85302, Rev. 0 Blade and Off
Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE1250KW SPE140KW SPE150KH SPE151KW SPEL150KH
Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE10KW SPE0KW SPE10KH SPE11KW SPEL10KH MOWER UNIT MODEL SPE30 SPE480 SPE31 SPE481 IT IS POLICY OF SNAPPER TO
Parts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
Special Features. u Blanking plug seats in top of. u Bonded seal allows disconnects. and re-connects. u Right-hand or left-hand release
DT-2 On/Off Tool The D&L DT-2 On/Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug. The tubing string can then be removed from the well. When re-run,
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
MODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
Models: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
FEEDMAX W/ SHUTTLE IJ SERIES. Parts Manual
FEEDMAX W/ SHUTTLE IJ SERIES Parts Manual TABLE OF CONTENTS FEEDMAX SYSTEM FEEDMAX CONVEYOR (FIG. 1)....3 FRAME ASSEMBLY (FIG. 2).. 5 ADJUSTABLE PULLEY ASSEMBLY (FIG. 3)..7 DRIVE ASSEMBLY (FIG. 4)....9
Castle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
LF-72 PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-501 RETURN TO MAIN INDEX PARTS LIST FOR P-501 P-501-A P-501-A ILLUSTRATION
Quicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
DIPACO CATERPILLAR NEW SCROLL PARTS CATALOG 3304B/3306B AND 3406B/3406C. Updated April April CATERPILLAR NEW SCROLL
DIPACO 3304B/3306B AND 3406B/3406C PARTS CATALOG Updated April 2010 April 2010 1 INTRODUCTION ADDRESS DIPACO, Inc. 105 East Parr Boulevard Reno, Nevada 89512 USA Phone: (775) 329-7511 Fax: (775 329-9740
RL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
Part number: (X1361-) Description: Conduit Duraflex;.218 O.D. Coiled construction; H.D.P.E. jacket only, unlined.
Part number: 30133-1 (X0315-) Description: Conduit - Light Duty 3 series;.26 O.D. Stranded construction; H.D.P.E. Jacket, H.D.P.E. liner. sizes. Part number: 52020041 (X0321-) Description: Conduit Light
8. Illustrated Parts Lists
Hydraulics B 1-41 8. Illustrated Parts Lists To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use these five-column parts lists, and the accompanying illustrations,
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3
SERVICE INSTRUCTIONS ASSEMBLY & DISASSEMBLY T50X DOUBLE ACTING HYDRAULIC SERIES ACTUATORS
Page 1 of 7 SERVICE INSTRUCTIONS ASSEMBLY & DISASSEMBLY T50X DOUBLE ACTING HYDRAULIC SERIES ACTUATORS INTRODUCTION This service procedure is offered as a guide to enable general maintenance to be performed
Contents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT
PARTS BOOK FLAIL HEADS 90 SIDE MID-MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR SITUATION
22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced!
1-161 Compact Guide Cylinder (Basic type) ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Up to 17% Weight reduced! New Weight reduced by up to 17% with a shorter guide rod and thinner plate Guide rod
RL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
FIGURE 1 - PARTS LIST: MK-2025SSP LPG CONCRETE SAW P/N
EXPLODED VIEW FIGURE 1 - PARTS LIST: MK-0SSP LPG CONCRETE SAW P/N 16893 19 1 3 0 1 13 17 1 1 10 11 16 9 6 3 8 18 7 1 PARTS LIST FIGURE 1 - PARTS LIST: MK-0SSP LPG CONCRETE SAW P/N 16893 1 BELT, BX3 1076
TruCourse Retrievable Pulser. Maintenance Manual
TruCourse Retrievable Pulser Maintenance Manual 500770 C January 2016 Intellectual Property Notice Tolteq is a trademark of Tolteq Group, LLC. Other trademarks may be used in this document. Tolteq disclaims
Compressor MODEL 05G $3.00
Compressor MODEL 0G -0 $.00 Service Parts List MODEL 0G COMPRESSOR CONTENTS INTRODUCTION... I ORDERING INSTRUCTIONS... I GENERAL NOTES... i. TOOLS / OILS / FITTINGS.... CRANKCASE AND SUCTION SERVICE VALVE....
8. Illustrated Parts Lists
Hydraulics B 1-43 8. Illustrated Parts Lists To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use these five-column parts lists, and the accompanying illustrations,
ANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater
T E M P O S O N I C S I I I ANALOG P r o d u c t S p e c i f i c a t i o n s F e a t u r e s Superior resolution and repeatability Absolute displacement and velocity measurement Modular, non-contacting
PARTS BOOK PARTS BOOK CATALOG
PARTS BOOK PARTS BOOK CATALOG BOOM FLEXWING MOWER MOWERS HEADS ROTARY 15 CUT FLAIL DRAWBAR SAW HEAD MOUNT DITCHER DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND
Section 9 Pins, Rings, Springs & Hooks
Section 9 Pins, Rings, Springs & Hooks Contents...Page # Springs...234 Ajax Wire...235 Tube Assortments...236 Springs...237-242 Retaining Rings...243 Basic External Retaining Rings...244 Retaining Rings...245