FERTILIZER Dry Fertilizer... P128 Fertilizer Openers, Mounts And Attachments... P116 Liquid Fertilizer... P134 Rear Trailer Hitch...

Transcription

1 PARTS LIST INDEX ROW UNIT 15" Seed Opener Disc Blade/Bearing Assembly And Scrapers... P11 Brush-Type Seed Meter... P21 Coulter Mounted Residue Wheels... P34 Covering Discs/Single Press Wheel... P14 Drag Closing Attachment... P17 Finger Pickup Seed Meter... P20 Frame Mounted Coulter W/Residue Wheels... P36 Gauge Wheels... P12 Granular Chemical Banding Options... P25 Granular Chemical Hopper And Hopper Panel Extension... P22 Granular Chemical Meter And Meter Drive... P24 Hopper Support And Meter Drive... P18 Pneumatic Down Pressure Package Option... P4 Parallel Arms, Mounting Support Plate And Quick Adjustable Down Force Springs Option... P10 Pneumatic Down Pressure Control Console, Sending Unit And Harnesses... P6 Pneumatic Down Pressure Air Compressor Package Option, Dual Solenoid Assembly, Tubing And Fittings... P8 Row Unit Mounted Bed Leveler... P28 Row Unit Mounted Disc Furrower... P30 Row Unit Mounted No Till Coulter... P27 Row Unit Mounted Residue Wheel... P32 Seed Hopper And Lid... P19 Shank Assembly, Seed Tube And Depth Adjustment... P2 Spring Tooth Incorporator... P26 V Closing Wheels... P16 BASE MACHINE 2-Point Hitch Option... P44 Axle Assembly... P60 Bolt-On Wheel Module/Transport Latch Catch... P70 Center Frame... P52 Center Pivot... P58 Contact Wheel And Drive Shaft(s)... P64 Cylinders... P84 Electrical Components... P104 Ground Drive Wheel... P67 Hose Take-Up... P50 Hydraulic Drive Package Option... P54 Hydraulic Hoses And Fittings... P98 Inner Hitch... P46 Inner Module Drive... P71 Outer Hitch... P42 Point Row Clutch... P72 Row Marker Assemblies... P80 Row Marker Spindle/Hub/Blade... P79 Safety Chain... P42 Seed Rate Transmission And Row Unit Drill Shafts... P68 Transport Wheels/Rock Guards... P62 Two-Speed Point Row Clutch... P74 Two-Speed Point Row Clutch Wheel Module Extension... P76 Valve And Junction Blocks... P92 Valve Box Module... P102 Valves (Solenoid, Flow Control, Pressure Relief, Check)... P97 Wing Frame... P56 ELECTRONIC SEED MONITOR KPM III Electronic Seed Monitor... P106 KINZE Cobalt Display... P112 KINZE Vision Display... P108 Planter Monitor Module (PMM)... P110 INTERPLANT SYSTEM Interplant Push Row Unit... P38 Interplant Push Row Unit, Air Clutch Package... P40 Interplant Push Row Unit Drive... P114 FERTILIZER Dry Fertilizer... P128 Fertilizer Openers, Mounts And Attachments... P116 Liquid Fertilizer... P134 Rear Trailer Hitch... P150 Decals, Paint And Miscellaneous... P152 Numerical Index... P155 P1 8/08

2 SHANK ASSEMBLY, SEED TUBE AND DEPTH ADJUSTMENT (RU166/D16245) P2 Rev. 7/09

3 SHANK ASSEMBLY, SEED TUBE AND DEPTH ADJUSTMENT (Per Row) 1. G Hex Washer Head Cap Screw, ⅜"-16 x 1 ¼" 2. GB Cover, Depth Adjustment 3. GB Handle, Depth Adjustment 4. GB Lever, Depth Adjustment 5. GD Cap Plug 6. GD Spring 7. GD Pin, ⅜" x 1 ⅔" 8. GD Sleeve, ⅜" I.D. x ⅝" O.D. x " Long 9. G Hex Head Cap Screw, ⅜"-24 x 2 ½", Grade 8 G Lock Nut, ⅜"-24, Grade C 10. G Chain, No. 41, 98 Pitch Including Connector Link G Chain, No. 41, 16 Pitch Including Connector Link (Used W/Row Unit Extension Brackets) GR Connector Link, No GD Sleeve, " Long 12. G Special Washer, ⅜" x 1 ½" O.D. 13. GD Idler Spring 14. GD Sleeve, 1" Long 15. G Lock Nut, ⅜" G Washer, ⅜" USS 17. GD Idler 18. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Nut, ⅜" GD Stop 20. G Hex Head Cap Screw, ⅜"-16 x 3 ¾" 21. G Clevis Pin, ¼" x 2 ½" G Hair Pin Clip, No G Carriage Bolt, 5 16"-18 x ¾" G Serrated Flange Nut, 5 16" GD Shield See Gauge Wheels, Pages P12 And P GA Shank W/Gauge Wheel Pivot Spindle And Set Screw GD Spindle G Hex Head Cap Screw, ½"-13 x ¾" 26. G Washer, ⅞" O.D. x 13 32" I.D. x.134" (If Applicable) 27. GD Dust Cap 28. See KPM III Electronic Seed Monitor, Pages P106-P107 Or Planter Monitor Module (PMM), Pages P110-P GB Collar, Depth Adjustment 30. GB Pivot Link, Depth Adjustment 31. GD Sun Shade (Rubber) 32. G Hex Slotted Head Cap Screw, #10-32 x 1" (If Applicable) G Serrated Flange Nut, #10-32 (If Applicable) 33. GA Limit Switch W/Cable (If Applicable) 34. GD Implement Switch Bracket (If Applicable) A. GA Implement Switch Assembly, (Items 32-34) (If Applicable) P3 8/08

4 PNEUMATIC DOWN PRESSURE PACKAGE OPTION (RU157c/RU159a/RU157d/A12405) Pull Row Unit Shown NOTE: Items that are not referenced on this page may be referenced on page P Push Row Unit Shown P4 Rev. 7/09

5 PNEUMATIC DOWN PRESSURE PACKAGE OPTION (Per Row) 1. GA Air Spring Assembly G Hex Head Cap Screw, ½"-13 x 1 ¼" G Lock Washer, ½" 2. GB Saddle 3. G Hex Head Cap Screw, ⅝"-18 x 1 ¼" GD Special Washer, ⅝", Hardened GD Sleeve, ⅞" O.D. x ⅝" I.D. x 21 32" 4. GB Head Mount 5. GB Shoulder Nut, ¾" GB Bracket 7. G Hex Socket Cap Screw, ½"-13 x 1 ½" G Serrated Flange Nut, ½" G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" SAE GD Spacer, ¼" G Lock Nut, ⅜" GD Link 10. GB Plate 11. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Washer, ½" SAE (Lower Two Holes Only) G Lock Washer, ½" 12. GB Yoke Mount 13. GB Yoke 14. GB Mount 15. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GB Plate 17. GB Extension 18. G Hex Head Cap Screw, ½"-13 x 1 ¾" G Washer, ½" SAE G Lock Nut, ½" GD Lock Clamp 20. GD Spacer, 1 ¼" O.D. x 1" 21. G Hex Head Cap Screw, ¼"-20 x ⅝" 22. GR Sprocket, 19 Tooth 23. G Retaining Ring 24. G Slotted Flat Head Machine Screw, No x ½", Stainless Steel 25. GR Air Housing Cover 26. GR Sprocket Hub 27. GR Ratchet Gear 28. GR Clutch Spring 29. GR Hex Bushing 30. GR Air Clutch Housing 31. G Hex Head Cap Screw, ¼"-20 x ¾" G Hex Nut, ¼" GR Air Cylinder 33. GR Push Connect, ⅛" NPT Male x ¼" 34. G Pan Head Machine Screw, ¼"-20 x ¾" x ¾" 35. GR Filter 36. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration A. GA Air Clutch Assembly, (Items 20-35) P5 Rev. 7/09

6 PNEUMATIC DOWN PRESSURE CONTROL CONSOLE, SENDING UNIT AND HARNESSES (PNE30b/MTR27a/ELC27b/MTR45/MTR27t/PNE30c) P6 8/08

7 PNEUMATIC DOWN PRESSURE CONTROL CONSOLE, SENDING UNIT AND HARNESSES 1. GA Power Lead Adapter 2. GA Control Box Assembly 3. GA Sending Unit 4. GA Wiring Harness W/Fuse Holder And Fuse, 206" GD Fuse Holder GD Fuse, 2 Amp Delay Action 5. G1K268 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (1) Lock Ring, (3) Female Terminal Pins 6. G1K267 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (3) Male Terminal Pins 7. GA Strain Relief 8. GR Hex Face Nut, 15 32"-32 GR Internal Tooth Lock Washer, 15 32" 9. GA Switch, 3 Position Toggle, Momentary On-Off-Momentary On 10. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 11. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 12. GA Pin Female Connector Kit, Includes: (1) 4-Pin Female Housing, (4) Pin Contacts, (4) Seals 13. GA Pin Male Connector Kit, Includes: (1) 4-Pin Male Housing, (4) Socket Contacts, (4) Seals 14. G1K321-2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female Housings, (6) Pin Contacts, (6) Seals 15. G1K320-2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, (6) Socket Contacts, (6) Seals 16. GA Strain Relief 17. GA Wiring Harness W/Fuse Holder And Fuse, 60' GD Fuse Holder GD Fuse, 20 Amp 18. GA Wiring Harness, 60' 19. See Pneumatic Down Pressure Air Compressor Package Option, Dual Solenoid Assembly, Tubing And Fittings, Pages P8 And P9 20. GD Nylon Tubing, ¼" O.D. x 1 ½' 21. GD Reducer, ⅜" To ¼" 22. GD Tee, ⅜" Tube Union 23. GA Hall Effect Adapter 24. See Planter Monitor Module (PMM), Pages P110 And P111 P7 Rev. 7/09

8 AIR COMPRESSOR PACKAGE OPTION, DUAL SOLENOID ASSEMBLY, TUBING AND FITTINGS (PNE06c/PNE02/PNE05/A13169/PNE09/PNE08) 1. GD Cover 2. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel G Serrated Flange Nut, No GA Air Compressor 4. GA Filter Assembly GR Filter 5. GA Compressor Mount P8 Rev. 7/09

9 AIR COMPRESSOR PACKAGE OPTION, DUAL SOLENOID ASSEMBLY, TUBING AND FITTINGS 6. G Hex Head Cap Screw, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" GA Valve Stem, ¼" NPT 8. GD Nipple, ¼" NPT 9. GD Plug, ¼" NPT 10. GD Tee, ¼" NPT 11. GA Tank, 3 Gallon 12. GA Drain, ¼" NPT 13. GR Pressure Switch 14. GA Tube Cutter W/Blade GR Blade 15. G Slotted Pan Head Machine Screw, M4-0.7 x GA Shutoff Valve, ¼" NPT 17. GD Plug, ¼" NPT 18. GA Breather, ¼" NPT 19. GD Connector, ¼" Male NPT 20. GA Block 21. GD Connector, ¼" Male NPT 22. GA Solenoid 23. GD Female Cross, ¼" NPT 24. GA Pressure Gauge, ¼" NPT 25. GD Swivel Elbow, ¼" NPT x ⅜" 26. GD U-Bolt, 3" x 3" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Compressor Mount 28. G Hex Head Cap Screw, ¼"-20 x 1 ¾" G Lock Washer, ¼" G Washer, ¼" USS 29. GD Tee, ⅜" Tube Union, Pull Row Unit (Pneumatic Down Pressure) GD Tee, ⅜" x ⅛" NPT Extended, Push Row Unit (Pneumatic Down Pressure) GD Tee, ¼" Press On, Pull/Push Row Units (Air Clutch) 30. GD Nylon Tubing, ⅜" O.D. x 44', 8 Row Pull Row Units (Pneumatic Down Pressure) GD Nylon Tubing, ⅜" O.D. x 64', 12 Row Pull Row Units (Pneumatic Down Pressure) GD Nylon Tubing, ⅜" O.D. x 86', 16 Row Pull Row Units (Pneumatic Down Pressure) GD Nylon Tubing, ⅜" O.D. x 60', 11 Row Push Row Units (Pneumatic Down Pressure) GD Nylon Tubing, ⅜" O.D. x 82', 15 Row Push Row Units (Pneumatic Down Pressure) GD Nylon Tubing, ⅜" O.D. x 5', Even-Row Push Row Unit (Pneumatic Down Pressure) GD Nylon Tubing, ¼" O.D. x 52', 12 Row Pull/Push Row Units (Air Clutch) GD Nylon Tubing, ¼" O.D. x 70', 16 Row Pull Row Units (Air Clutch) GD Nylon Tubing, ¼" O.D. x 37', 11 Row Push Row Units (Air Clutch) 31. GD Elbow, ⅜" x ⅛" NPT Extended, Pull Row Unit (Pneumatic Down Pressure) 32. GA Mini Regulator W/Gauge 33. GD Elbow, ¼" x ⅛" NPT Swivel 34. GD Grommet, 1" 35. G Hex Head Cap Screw, ¼" - 20 x ½" G Lock Washer, ¼" G Hex Nut, ¼" - 20 A. GA Air Compresor Assembly (Items 1-14) B. GA Dual Solenoid Assembly (Items 15-25) (Only applicable with pneumatic down pressure option) P9 Rev. 7/09

10 PARALLEL ARMS, MOUNTING SUPPORT PLATE AND QUICK ADJUSTABLE DOWN FORCE SPRINGS OPTION RUB021/RUB022(RU78f/B0366) (Per Row) 1. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Mounting Support Plate 3. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 4. GD Upper Parallel Arm 5. G Hex Head Cap Screw, ⅝"-18 x 2" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GB Spring Anchor 7. GD Tab Lock Pin, 7 16" x 1 ½" 8. GD Spring 9. - See Hopper Support And Meter Drive, Page P GA Lower Parallel Arm 11. GA Bearing/Sprocket, ⅞" Hex Bore 12. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GB Extension Bracket A. G6325X - U-Bolt Package For 5" x 7" Toolbar, Includes: (2) GD1113, (4) G10230, (4) G10104 P10 Rev. 7/09

11 15" SEED OPENER DISC BLADE/BEARING ASSEMBLY AND SCRAPERS (RU139) (Per Row) 1. G Hex Head Cap Screw, ⅜"-16 x ⅝" G Serrated Flange Nut, ⅜" GA2012R 1 Disc Scraper, R.H. GA2012L - Disc Scraper, L.H. (Shown) 3. G Rivet, ¼" x ½" 4. GD Special Hex Head Cap Screw, ⅝"-11 x 1 ½", L.H. Threads G Hex Head Cap Screw, ⅝"-11 x 1 ½" 5. GD Dust Cap 6. G Special Machine Bushing, ⅝" x 1" O.D. 7. GD Bearing Housing 8. GA Bearing 9. GD Disc Blade, 3.5 mm x 15" 10. G Machine Bushing, ⅝" (.030" Thick)(As Required) See Shank Assembly, Pages P2 And P3 12. GB Seed Tube Guard/Inner Scraper 13. G Hex Socket Head Cap Screw, 5 16"-18 x 1", Grade G Hex Head Cap Screw, ⅜"-16 x 2 ¾" G Serrated Flange Nut, ⅜" GD Sleeve, ⅜" I.D. x ⅝" O.D. x " Long A. GA Disc Blade/Bearing Assembly, Less Dust Cap (Items 3 And 7-9) P11 8/08

12 GAUGE WHEELS (RU140) P12 8/08

13 GAUGE WHEELS (Per Row) 1. G Machine Bushing, 1" (.048" Thick) 2. G Washer, ½" USS 3. G Lock Washer, ½" 4. G Hex Head Cap Screw, ½"-13 x 1" 5. GD Cover 6. G Carriage Bolt, 5 16"-18 x 1 1 / 4 " G Serrated Flange Nut, 5 16" G Carriage Bolt, 5 16"-18 x 1 ¾" G Serrated Flange Nut, 5 16" G Hex Head Cap Screw, ⅝"-11 x 3" G Lock Washer, ⅝" 9. G Hex Head Cap Screw, 5 16"-18 x ⅝" G Lock Nut, 5 16"-18, Grade GD Half Wheel 11. GD Tire 12. GA Bearing 13. G Special Machine Bushing, ⅝" x 1" O.D. 14. GA Wheel Arm W/Grease Fitting, Bushings And Seals, L.H. (Shown) GA Wheel Arm W/Grease Fitting, Bushings And Seals, R.H. G Grease Fitting, ¼"-28 (Per Arm) GB Bushing, 1" I.D. x 1 ¼" O.D. x 1" Long (Per Arm) GD Seal (Per Arm) See Shank Assembly, Pages P2 And P3 A. GA Gauge Wheel Complete (Items 5-7 And 9-12) B. G1K296 - Gauge Wheel Arm Bushing And Seal Driver Kit, Includes: (1) Seal Driver, (1) Bushing Driver, (1) Instruction P13 8/08

14 COVERING DISCS/SINGLE PRESS WHEEL RUA054/RUB026(RU94d) P14 8/08

15 COVERING DISCS/SINGLE PRESS WHEEL (Per Row) 1. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS 2. GB Wheel Arm Stop 3. G Carriage Bolt, ½"-13 x 2 ¼" G Carriage Bolt, ½"-13 x 2 ½" (Used W/Straight Drop In-Furrow Granular Chemical Bracket) G Hex Nut, ½" GA Spring 5. GB Eccentric Bushing 6. G Hex Nut, ½" G Adjusting Bolt, ½"-13 x 5" 8. GA Mounting Arm 9. G Cotter Pin, ¼" x 1 ½" 10. G Hex Head Cap Screw, 5 16"-18 x 1 ¼" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Bracket 12. GA Mount 13. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" G Lock Nut, ⅝" GD Bushing, 41 64" I.D. x ⅞" O.D. x ¼" Long 16. GD Disc Blade, 8" 17. G Hex Head Cap Screw, 5 16"-18 x ⅝" G Lock Nut, 5 16"-18, Grade G Hex Head Cap Screw, 5 / 8 "-11 x 9" 19. GD Sleeve, ⅝" I.D. x ⅞" O.D. x 2 ⅞" Long 20. GD Half Wheel 21. GA Bearing 22. GD Tire 23. GA Bearing 24. GD Bearing Housing 25. G Rivet, ¼" x ½" 26. G Hex Head Cap Screw, ⅝"-11 x 2 ¼" 27. GD Dust Cap A. GA Single Press Wheel Complete W/Bearing (Items 17 And 20-22) B. GA Covering Disc Blade Complete W/Bearing (Items 16 And 23-25) P15 8/08

16 V CLOSING WHEELS (RU83i/RU83n) (Per Row) 1. G Carriage Bolt, ½"-13 x 2 ¼" G Carriage Bolt, ½"-13 x 2 ½" (Used W/Straight Drop In-Furrow Granular Chemical Bracket) G Lock Nut, ½" GB Wheel Arm Stop 3. G Hex Head Cap Screw, ⅜"-16 x 1" G Washer, ⅜" USS 4. GB Stepped Bushing 5. GB Eccentric Bushing 6. GD Spring 7. G Hex Head Cap Screw, ¼"-20 x 1" 8. G Hex Head Cap Screw, ⅝"-11 x 3 ½" G Lock Nut, ⅝" G1K345 - Closing Wheel Shield Kit W/Hardware And Instruction G Carriage Bolt, ⅜"-16 x ¾" G Carriage Bolt, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" GD Nylon Half Wheel 11. GA Bearing 12. GD Rubber Tire, 1" x 12" 13. GD Bushing, 41 64" I.D. x ⅞" O.D. x ¼" Long 14. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade GA Cast Iron Closing Wheel W/Bearing GA Bearing 16. GA Arm 17. GB Lever 18. GD Special Washer, ⅝", Hardened 19. G Lock Washer, ⅝" A. GA Rubber Closing Wheel Complete W/Bearing (Items 7 And 10-12) P16 8/08

17 DRAG CLOSING ATTACHMENT RUB050(RU90c) (Per Row) 1. G Carriage Bolt, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" GD Front Bracket 3. GD Blade 4. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Rear Bracket A. G7566X - Drag Closing Attachment Complete (Items 1-5) P17 8/08

18 HOPPER SUPPORT AND METER DRIVE (METR22d) (Per Row) 1. GB Hopper Mount 2. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 3. G Hex Head Cap Screw, ⅝"-18 x 2 ¼" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" G Hex Head Cap Screw, ⅝"-18 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" G Spring Pin, ¼" x 1 ½" 6. G External Retaining Ring, ⅝" 7. GD Knob 8. G Carriage Bolt, 5 16"-18 x 1 ¼" G Serrated Flange Nut, 5 16" GB Clutch Adapter Plate 10. G Hex Head Cap Screw, ⅜"-16 x 3 ½" G Washer, ⅜" USS G Lock Nut, ⅜" G Carriage Bolt, ¼"-20 x ⅝", Grade 2 G Serrated Flange Nut, ¼" GA Hopper Hold Down Latch 13. GA Hopper Support 14. GA Double Sprocket And Bearing, Drive Clutch, 11/19 Tooth 15. GD Spring 16. GD Shaft 17. GB Coupler 18. G Spring Pin, 3 16" x 1 ¼" A. GA Meter Drive Assembly Complete, 11/19 Tooth (Items 5-7 And 14-18) P18 8/08

19 SEED HOPPER AND LID (RU87e/RU87a) (Per Row) 1. GD Lid 2. GA Seed Hopper, Reinforced 3. GD Seed Reserve Baffle P19 8/08

20 FINGER PICKUP SEED METER RUA015/RUA056/RUA057(RU13k/RU13d) Left Rear View Of Complete Meter (Per Row) 1. G Spring Pin, ¼" x 1 ½" 2. G Spring Pin, 3 16" x 1 ½" 3. GD Housing Cover 4. GD Belt Drive Sprocket 5. GD Seed Belt 6. GA Bearing 7. GA Conveyor Housing 8. GB Bearing Housing 9. GR Carrier Plate W/Brush And Screw (Corn) GR Carrier Plate W/Brush And Screw (Sunflower) GA Brush G Rolling Thread Screw, No. 10 x ¾" 10. G Slotted Hex Washer Head Screw, No x ⅝" 11. GD Finger, Corn 12. GD Spring 13. GB Cam (Corn) 14. GD Finger Holder 15. G Cotter Pin, 5 32" x 1" 16. G Locking Thumbscrew, 5 16"-18 x ¾" 17. GD Seed Baffle 18. GD Cover Nut 19. G Jam Nut, ⅝"-18 UNF 20. GA Wave Washer, ⅝" (Triple Wave) 21. G Hex Head Cap Screw, ¼"-20 x ⅝" G Hex Flange Nut, ¼"-20, No Serrations 22. G Hex Head Cap Screw, ¼"-20 x ½" G Serrated Flange Nut, ¼" G Hex Head Cap Screw, ¼"-20 x 1 ½" G Serrated Flange Nut, ¼" G Spring Pin, ¼" x 1 ¼" 25. GD Idler 26. GB Bushing, 17 64" I.D. x " Long 27. GD Finger, Oil Sunflower 28. GD Shank Cover, Finger Pickup Seed Meter 29. GD Half Rate Blank Finger 30. GB Cam (Sunflower) A. GR Finger Assembly, Corn (Items And 20) B. GR Finger Assembly, Oil Sunflower (Items 12, 14, 20, 27 And 30) P20 8/08

21 BRUSH-TYPE SEED METER RUA037/RUA056/RUA057(RU14f) Left Rear View Of Complete Meter Used W/ Soybean And Cotton Discs Used W/ Milo/Grain Sorghum Discs ¾" ⅜" (Per Row) 1. G Locking Thumbscrew, 5 16"-18 x ¾" 2. GA Housing W/Bearing GA Bearing 3. GA Hub W/Shoulder Bolts GD Shoulder Bolt, ¼"-20 (2 Used) 4. G Spring Pin, ¼" x 1 ¼" 5. G Spring Pin, ¼" x 1 ½" 6. GD Wear Strip 7. GA Upper Brush 8. GD Upper Brush Retainer (Used W/Soybean And Cotton Discs) 9. GA Lower Brush 10. GA Seed Disc, Soybean, 60 Cell, Black Color-Coded GA Seed Disc, Specialty Soybean, 48 Cell, Dark Blue Color-Coded GA Seed Disc, Cotton, Acid-Delinted, 30 Cell, White Color-Coded GA Seed Disc, Large Cotton, Acid-Delinted, 36 Cell, Tan Color-Coded GA Seed Disc, High-Rate Cotton, Acid-Delinted, 48 Cell, Light Green Color-Coded GA Seed Disc, Hill-Drop Cotton, Acid-Delinted, 12 Cell, Brown Color-Coded GA Seed Disc, Small Hill-Drop Cotton, Acid-Delinted, 12 Cell, Dark Green Color-Coded 11. G Wing Nut W/Nylon Insert, ¼" G Hex Washer Head Screw, No x ½" G Slotted Tap Screw, No x ⅝" (Use As Required) 13. GD Cover 14. GD Shank Cover, Brush-Type Seed Meter 15. GA Seed Disc, Small Milo/Grain Sorghum, 30 Cell, Red Color-Coded GA Seed Disc, Large Milo/Grain Sorghum, 30 Cell, Light Blue Color-Coded GA Seed Disc, High-Rate Small Milo/Grain Sorghum, 60 Cell, Red Color-Coded GA Seed Disc, High-Rate Large Milo/Grain Sorghum, 60 Cell, Yellow Color-Coded 16. GD Upper Brush Retainer (Used W/Milo/Grain Sorghum Discs) P21 8/08

22 GRANULAR CHEMICAL HOPPER AND HOPPER PANEL EXTENSION (METR14d) P22 8/08

23 GRANULAR CHEMICAL HOPPER AND HOPPER PANEL EXTENSION (Per Row) 1. G Washer, ⅜" USS 2. GD Sleeve, 9 16" Long 3. GD Spring 4. G Special Washer, ⅜" x 1 ½" O.D. 5. GD Sleeve, " Long 6. GD Idler 7. G Lock Nut, ⅜" G Hair Pin Clip, No GD1059L 1 Support, L.H. (Shown) GD1059R 1 Support, R.H. 10. G Hex Head Cap Screw, ⅜"-16 x ¾" G Lock Washer, ⅜" 11. G Carriage Bolt, 5 16"-18 x ¾" G Serrated Flange Nut, 5 16" G Hex Head Cap Screw, ⅜"-16 x 2 ¾" 13. G External Retaining Ring, ⅝" 14. GD Plate 15. A Hopper Panel Extension (Non-Stock Item) (Sub Wholegoods Order Code ) 16. GD Block 17. G Hex Head Cap Screw, ¼"-20 x ¾" G Serrated Flange Nut, ¼" GD Hinge 19. GA Hopper 20. GA Lid 21. GD Knob 22. G Spring Pin, ¼" x 1 ½" P23 8/08

24 GRANULAR CHEMICAL METER AND METER DRIVE RUA051/RUB028(RU91a) (Per Row) 1. G External Retaining Ring, ⅝" 2. GD Knob 3. G Spring Pin, ¼" x 1 ½" 4. - See Granular Chemical Hopper And Hopper Panel Extension, Pages P22 And P23 5. GA Sprocket And Bearing, Drive Clutch, 24 Tooth 6. GD Spring 7. GD Shaft 8. GB Coupler 9. G Spring Pin, 3 16" x 1 ¼" 10. GD Shaft 11. G Hex Socket Head Cap Screw, No x ⅞" G Lock Washer, No GD Feed Roller, Hex Bore 13. GB Bearing 14. GD Hex Bushing 15. G Chain, No. 41, 114 Pitch Including Connector Link GR Connector Link, No G Wave Washer, ½" 17. G Washer, ¼" USS 18. G Slotted Hex Self-Tapping Screw, ¼"-20 x ¾" 19. G Slotted Hex Self-Tapping Screw, No. 10 x ⅜" 20. GD Support Strap 21. GD Metering Gate 22. GB Granular Housing A. GA Granular Chemical Meter Complete (Items 1, 9, 10, And 16-22) P24 8/08

25 GRANULAR CHEMICAL BANDING OPTIONS RUA061/RUA073(RU101m/RU83m) 1. GD Funnel 2. G Wire Hose Clamp, ¾" 3. GD Hose, 7 16" x 28" 4. G Slotted Pan Head Self-Tapping Screw, No. 10 x ½" 5. GA Slope-Compensating Bander W/Hardware (4 ½" Band Width) G Uni-Clamp G Pan Head Screw, No x 1 ¼" G Hex Nut, No GD U-Bolt, 1 ½" x " x ¼"-20 G Washer, ¼" USS G Lock Nut, ¼"-20, Grade B 7. GD Spacer 8. GD1115L - Hanger Bracket, L.H. 9. G Cotter Pin, ⅛" x ½" 10. GD1115R - Hanger Bracket, R.H. 11. G Carriage Bolt, ¼"-20 x 3 ¾", Grade 2 G Lock Washer, ¼" G Hex Nut, ¼" GD Hanger 13. GA Diffuser, 14" Band 14. G Carriage Bolt, ⅜"-16 x 2" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Clamp 16. G Carriage Bolt, ½"-13 x 2 ½" (Replaces Existing ½" x 2 ¼" Hardware) 17. GA Bracket (Straight Drop In-Furrow) 18. G1K385 - Bander Shield Kit W/Hardware And Instruction G Hex Head Cap Screw, ⅜"-16 x 1 ½" GD Special Washer, ⅜", Hardened P25 8/08

26 SPRING TOOTH INCORPORATOR RUA055(RU95) (Per Row) 1. G Serrated Flange Nut, ¼" GD Eyebolt, ¼" G Twin Loop Chain, 9 Links 4. GD Front Bracket 5. G Carriage Bolt, ⅜"-16 x 1" G External Tooth Lock Washer, ⅜" G Serrated Flange Nut, ⅜" GD Spring Tooth 7. G Carriage Bolt, ⅜"-16 x 1" G Serrated Flange Nut, ⅜" GD Rear Bracket 9. GA Cable Assembly P26 Rev. 7/09

27 ROW UNIT MOUNTED NO TILL COULTER (D14398/RU102c/RU152) (Per Row) 1. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GA Arm 3. G Hex Head Cap Screw, ⅝"-11 x 4" G Lock Nut, ⅝" G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GD Adapter 6. GA Hub W/Bearing And Retaining Ring GA Bearing, Double Row GD Retaining Ring, " 7. GD Disc Blade, Fluted, 1", 8 Flutes (Shown) GD Disc Blade, Bubbled, 1" GD Disc Blade, Fluted, ¾", 13 Flutes 8. GD Spacer P27 Rev. 7/09

28 ROW UNIT MOUNTED BED LEVELER RUA059/RUA060(RU99/RU100) P28 8/08

29 ROW UNIT MOUNTED BED LEVELER (Per Row) 1. G Detent Pin, ½" x 2 ½" Grip 2. G Square Head Set Screw, ⅝"-11 x 2 ¼" 3. G Hex Jam Nut, ⅝"-11, Grade 2 4. GA Mounting Bracket 5. GD Bushing, 1" O.D. x 9 16" I.D. x 7 16" Long 6. G Hex Head Cap Screw, ½"-13 x 1 ¾" GD Special Washer, ½", Hardened G Lock Nut, ½" G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" USS G Lock Nut, ½" GD Link 9. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Nut, ½" GA Anchor 11. G Hex Head Cap Screw, ½"-13 x 1 ½" G Lock Nut, ½" GA Leveler 13. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Nut, 5 16"-18, Grade GD Blade P29 8/08

30 ROW UNIT MOUNTED DISC FURROWER RUA059/RUA058(RU99/RU98g) P30 8/08

31 ROW UNIT MOUNTED DISC FURROWER (Per Row) 1. G Detent Pin, ½" x 2 ½" Grip 2. G Square Head Set Screw, ⅝"-11 x 2 ¼" 3. G Hex Jam Nut, ⅝"-11, Grade 2 4. GA Mounting Bracket 5. GD Bushing, 1" O.D. x 9 16" I.D. x 7 16" Long 6. G Hex Head Cap Screw, ½"-13 x 1 ¾" GD Special Washer, ½", Hardened G Lock Nut, ½" G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" USS G Lock Nut, ½" GD Link 9. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Nut, ½" GA Anchor 11. G Hex Head Cap Screw, ½"-13 x 1 ½" G Lock Nut, ½" GA Support Arm 13. G Truss Head Slotted Machine Screw, 5 16"-18 x ⅞" G Hex Nut, 5 16" GD Dust Cap 15. G Hex Head Cap Screw, ⅝"-11 x 4 ½" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Hub W/Bearings GA Bearing 17. GD Disc Blade, Solid, 12" (Shown) GD Disc Blade, Notched, 12" 18. GD Spacer, 11 16" I.D. x ¾" Long GD Spacer, 11 16" I.D. x ½" Long P31 8/08

32 ROW UNIT MOUNTED RESIDUE WHEEL (RU103dd) P32 Rev. 7/09

33 ROW UNIT MOUNTED RESIDUE WHEEL (Per Row) 1. GD Dust Cap 2. GB Wheel, 12 Tine, ⅜" x 12" 3. G Hex Head Cap Screw, ⅝"-11 x 2 ¼" 4. GD Backing Plate 5. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade 8 6. GD Spacer, ½" x " Long 7. GA Wheel Mount 8. G Hex Head Cap Screw, ½"-13 x 3 ½" G Lock Washer, ½" G Hex Nut, ½" GD Spring 10. G Hex Head Cap Screw, ½"-13 x 4 ½" G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 5" (Lockup Bolt) G Lock Nut, ½" GD Spacer, ½" x 3" Long 13. GA Lower Link 14. GA Mount 15. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GA Upper Link 17. G Hex Head Cap Screw, ½"-13 x 3", Full Thread G Hex Jam Nut, ½"-13, Grade GA Hub W/Bearings GA Bearing A. GA Wheel Assembly, 12 Tine, R.H. (Items 2, 4, 5, And 18) P33 Rev. 7/09

34 COULTER MOUNTED RESIDUE WHEELS (RU153) P34 Rev. 7/09

35 COULTER MOUNTED RESIDUE WHEELS (Per Row) 1. GD Dust Cap 2. G Hex Head Cap Screw, ⅝"-11 x 3" G Hex Jam Nut, ⅝"-11, Grade 2 3. GA Locking Pin 4. GA Hub W/Bearings GA Bearing 5. GA Cam 6. GD Spring 7. G Washer, ½" SAE 8. G Lock Nut W/Nylon Insert, ½" G Hex Head Cap Screw, ¾"-10 x 10 ½" GB Bushing, 1 ⅛" O.D. x 25 32" I.D. x ¾" Long G Washer, ¾" SAE G Lock Nut, ¾" GB Mount 11. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Lock Washer, ⅜" 12. G Machine Bushing, ⅝" (.030" Thick) 13. GA Weed Guard W/Spring Pin G Spring Pin, ¼" x 1" 14. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade GD Backing Plate 16. GB Wheel, 12 Tine, ⅜" x 12" A. GA Wheel Assembly, 12 Tine, R.H. (Items 3, 4, 14, And 15) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 3, 4, 14, And 15) B. G1K467 - Residue Wheel Mount Kit (Items 17-20) P35 Rev. 7/09

36 FRAME MOUNTED COULTER W/RESIDUE WHEELS (RU135c/RU135g/RU153b/RU135hh) With Residue Wheels P36 Rev. 7/09

37 FRAME MOUNTED COULTER W/RESIDUE WHEELS (Per Row) 1. G Hex Head Cap Screw, ¾"-10 x 12" 2. GA Plate W/Angle 3. G Hex Head Cap Screw, ½"-13 x 1 ¾" 4. GA Coulter Frame 5. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Nut, ⅝" G Hex Head Cap Screw, ¾"-10 x 6 ½" G Lock Nut, ¾" GD Spring Anchor Bar 8. G Carriage Bolt, ½"-13 x 1 ¼" G Lock Nut, ½" GD Adapter 10. GA Hub W/Bearing And Retaining Ring GA Bearing, Double Row GD Retaining Ring, " 11. GD Disc Blade, Fluted, 1", 8 Flutes (Shown) GD Disc Blade, Bubbled, 1" GD Disc Blade, Fluted, ¾", 13 Flutes 12. GB Spring Seat 13. GD Compression Spring 14. GD Sleeve 15. G Hex Head Cap Screw, ⅝"-11 x 5" G Lock Nut, ⅝" GA Coulter Arm W/Grease Fitting G Grease Fitting, 45, ¼" G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Lock Nut, ⅝" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 19. GD Dust Cap 20. G Hex Head Cap Screw, ⅝"-11 x 3" G Hex Jam Nut, ⅝"-11, Grade GB Wheel, 12 Tine, ⅜" x 12" 22. GA Hub W/Bearings GA Bearing 23. GD Backing Plate 24. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade G Machine Bushing, ⅝" (.030" Thick) 26. GA Weed Guard W/Spring Pin G Spring Pin, ¼" x 1" 27. GA Mount 28. GA Cam 29. GD Spring 30. G Lock Nut W/Nylon Insert, ½" G Hex Head Cap Screw, ⅝"-11 x 1 ¾" G Lock Nut, ⅝" GA Support 33. G Hex Head Cap Screw, ½"-13 x 1" G Hex Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Washer, ⅝" SAE G Lock Nut W/Nylon Insert, ⅝" GD Sleeve, 3" A. GA Wheel Assembly, 12 Tine, R.H. (Items 21, 22, 23, And 24) (Shown) GA Wheel Assembly, 12 Tine, L.H. (Items 21, 22, 23, And 24) P37 Rev. 7/09

38 INTERPLANT PUSH ROW UNIT (RU156c/R141h) NOTE: Push row units use the same seed tube, row unit depth adjustment components, quick adjustable down force springs, 15" opener disc blades, gauge wheels, closing wheels, meter drive and seed hopper as the pull row unit. See those pages for common parts. P38 8/08

39 INTERPLANT PUSH ROW UNIT (Per Row) 1. GD Sleeve, " Long 2. GD Spring 3. G Special Washer, ⅜" x 1 ½" O.D. 4. GD Sleeve, 1 ⅜" Long 5. GD Idler 6. G Washer, ⅜" USS 7. G Lock Nut, ⅜" G Chain, No. 41, 96 Pitch Including Connector Link GR Connector Link, No GA Push Row Unit Shank 10. GB Hopper Mount 11. G Hex Head Cap Screw, ⅝"-18 x 1 ¾" G Lock Nut, ⅝" G Carriage Bolt, ⅜"-16 x 1 ¼" G Hex Nut, ⅜"-16 G Lock Nut, ⅜" G Carriage Bolt, ⅜"-16 x 3 ½" 14. GD Stop 15. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Nut, ⅜" GB Seed Tube Guard/Inner Scraper 17. G Hex Socket Head Cap Screw, 5 16"-18 x 1", Grade G Hex Head Cap Screw, ⅝"-18 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 20. GA Upper Arm 21. GA Lower Arm 22. G Hex Head Cap Screw, ⅝"-18 x 2" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Bearing/Sprocket, ⅞" Hex Bore 24. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" GA Mounting Plate 26. GA T-Bolt, ⅝"-11 x 6" G Lock Washer, ⅝" G Hex Nut, ⅝" G Spring Pin, 5 16" x 1 ⅛" 28. GD Lockup 29. G Cotter Pin, ¼" x 1 ½" 30. GD Spring 31. G Clevis Pin, ½" x 1 ½" G Cotter Pin, ⅛" x ¾" 32. GD Spring Tab 33. G Washer, ½" USS 34. GA Lift Lever W/Boot GD Boot 35. GD Bracket (Lift Lever) 36. GD Wire Lock Pin, ¼" x 1 ¾" 37. GD Mount 38. G Washer, ⅜" SAE P39 8/08

40 INTERPLANT PUSH ROW UNIT, AIR CLUTCH PACKAGE (RU156d/RU141h/RU164a) NOTE: Push row units use the same seed tube, row unit depth adjustment components, quick adjustable down force springs, 15" opener disc blades, gauge wheels, closing wheels, meter drive and seed hopper as the pull row unit. See those pages for common parts. NOTE: Items that are not referenced on this page may be referenced on pages P38 and P39. P40 8/08

41 INTERPLANT PUSH ROW UNIT, AIR CLUTCH PACKAGE (Per Row) 1. GA Hanger Bearing, ⅞" Hex Bore 2. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" G Slotted Flat Head Machine Screw, No x ½", Stainless Steel 4. GR Air Housing Cover 5. GR Hex Bushing 6. GR Ratchet Gear 7. GR Clutch Spring 8. GR Sprocket Hub 9. GR Anti-Rotation 10. G Pan Head Machine Screw, ¼"-20 x ¾" x ¾" 11. GR Air Clutch Housing 12. GR Air Cylinder 13. GR Push Connect, ⅛" NPT Male x ¼" 14. GR Filter 15. G Retaining Ring 16. GR Sprocket, 19 Tooth 17. G Hex Head Cap Screw, x ½" 18. GD Spacer, 1 ¼" O.D. x 1" 19. GD Lock Clamp 20. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration A. GA Air Clutch Assembly, (Items 3-18) P41 8/08

42 OUTER HITCH/SAFETY CHAIN PHA038/PHA025(TWL1f/WGN47a/B0292) 1. GB Clevis, Single (1 ¾" Hole) 2. GA Hitch Mount, 16 Row 30" 3. G Hex Head Cap Screw, 1 ¼"-7 x 6" G Lock Nut, 1 ¼"-7 4. G Hex Head Cap Screw, ¾"-10 x 2 ¾" G Lock Washer, ¾" G Hex Nut, ¾" GD Pin, 1 ¼" x 5 ⅛" G Cotter Pin, 3 16" x 2" 6. G Hex Head Cap Screw, ⅝"-11 x 2 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GA Jack Assembly Complete GA Detent Pin Assembly GR Crank Assembly GR Bevel Gear Set, Includes: (2) Bevel Gears, (1) Gear Pin, (1) Groove Pin 8. GA Hitch Mount, 8 Row 36"/38", 12 Row 30" And 12 Row 36"/38" ( Y Hitch Only) 9. GD Hose Holder 10. GA Detent Pin W/Chain (Transport Latch Locking Pin) 11. See Transport Latch Cylinder, Page P G Hex Head Cap Screw, ⅝"-11 x 2 ¼" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Catch Bar 14. GD Spring 15. GA Transport Latch 16. G Spring Pin, ¼" x 1" P42 Rev. 7/09

43 OUTER HITCH/SAFETY CHAIN 17. G Hex Head Cap Screw, ⅜"-16 x 3" GD Sleeve, 2" Long G Lock Nut, ⅜" G Washer, ½" SAE G Lock Nut, ½" GD Pin, ¾" x 3 ⅜" G Cotter Pin, 5 32" x 1 ½" 20. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Strip, ⅜" 21. GD Hose Clamp, 9 16" x 2 ½" x 2" 22. GD U-Bolt, 3" x 4" x ⅝"-11 G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" See Hose Take-Up, Pages P50 And P GA Roller W/Bronze Bushings, 8 Row Y And 12 Row Y Hitch GA Roller W/Bronze Bushings, 12 Row T Hitch And 16 Row Y and T Hitch GD Bronze Bushing 25. G Lock Nut, ⅜" G Lock Nut, ½" G Hex Head Cap Screw, ¾"-10 x 2" G Lock Nut, ¾" GA Bracket, Jack Mount GD Rubber Strip, ⅜" 29. GA Safety Pin, 12 ¾", 8 Row 36"/38" And 12 Row 30", 12 Row 36"/38" ( Y Hitch Only) GA Safety Pin, 14 ¾", 16 Row 30" GD Lynch Pin, ¼" GD Lynch Pin, 7 16" 30. G Hex Head Cap Screw, ½"-13 x 2" G Washer, ½" SAE 31. G Hex Head Cap Screw, ½"-13 x 1 ½", 8/12 Row G Hex Head Cap Screw, ½"-13 x 2", 16 Row G Serrated Flange Nut, ½" GA Wear Mount, 8 Row 36"/38" And 12 Row 30", 12 Row 36"/38" ( Y Hitch Only) GA Wear Mount, L.H., 16 Row 30" GA Wear Mount, R.H., 16 Row 30" GA Wear Pad Retainer, 16 Row 30" 33. GD Shim, 4" x 4" (As Required), All Sizes GD Shim, 4" x 6" (As Required), 16 Row 30" 34. GD Wear Pad, Nylatron, 4" x 4" (As Required), All Sizes GD Wear Pad, Nylatron, 4" x 6" (As Required), 12 Row 36"/38" ( T Hitch Only) And 16 Row 30" 35. GD Shim, 16 Gauge (16 Row Only) GD Shim, ⅜" (16 Row Only) 36. G Hex Head Cap Screw, ½"-13 x 1" G Lock Washer, ½" G Washer, ½" USS 37. A Outer Hitch, Y, 73", 8 Row 36"/38" (Non-Stock Item) A Outer Hitch, Y, 97", 12 Row 30" (Non-Stock Item) A Outer Hitch, T, 121", 12 Row 30" (Non-Stock Item) A Outer Hitch, Y, 121", 12 Row 36"/38" (Non-Stock Item) A Outer Hitch, Y, 127 ½", 16 Row 30" (Non-Stock Item) A Outer Hitch, T, 151 ½", 16 Row 30" (Non-Stock Item) 38. GD Pin, 1 ¼" x 12", 8 Row Y And T Hitch, 12 Row Y Hitch GD Pin, 1 ¼" x 14", 12 Row T Hitch And 16 Row Y and T Hitch G Pin, ⅜" x 2" 39. GA ½" Safety Chain W/Hook G1K412 - Safety Chain Repair Kit, Includes Hook, Flat Washer, Latch Pin, Safety Latch, Spring And Retaining Ring 40. G Hex Head Cap Screw, 1 ¼"-7 x 3" GD Special Washer G Washer, 1 ¼" SAE G Lock Nut, 1 ¼" GB Hitch Clevis, Single (2" Hole) P43 Rev. 7/09

44 2-POINT HITCH OPTION (IP1012/A12406) P44 Rev. 7/09

45 2-POINT HITCH OPTION 1. GA Hitch Pivot (March 1, 2009 and on) 2. GA Pivot Mount 3. G Hex Head Cap Screw, 1 ¼"-7 x 6" G Lock Nut, 1 ¼"-7 4. GA Pin, 13 ⅜" GD Washer, 4" O.D. x 2 ¼" I.D. x ¼" 5. GD Washer, 4" O.D. x " I.D. X ⅜" G Hex Head Cap Screw, 1"-8 x 2" G Lock Washer, 1" 6. GD Pivot Lock G Lock Washer, ⅝" G Washer, ⅝" USS G Hex Head Cap Screw, ⅞"-11 x 1 ¾" 7. GD Sleeve, 3" O.D. x " x 29 32" Thick GD Washer, 3" O.D. x " x ¼" Thick 8. GA Pivot Pin (March 1, 2009 and on) 9. GA Hammer Strap, Category 3 And 3N G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" 10. GA Hitch Bar 11. GD Tapped Bar 12. GA Pivot Bolt W/Grease Fitting, 1 ¾" x 10 ⅜" (Total Length) (Prior to March 1, 2009) G Grease Fitting, ¼"-28 GD Washer, 3" O.D. x " x ¼" Thick GD Sleeve, 3" O.D. x " x 29 32" Thick 13. GA Hitch Pivot W/Bushings And Grease Fittings (Prior to March 1, 2009) GD Hardened Bushing, 2 ¾" O.D. x 2 ¼" I.D. x 3" G Grease Fitting, 90, ¼"-28 P45 Rev. 7/09

46 INNER HITCH, Y PHA035/PHA037(TWL2i) P46 Rev. 7/09

47 INNER HITCH, Y 1. G Hex Head Cap Screw, ½"-13 x 1", 8 Row 36"/38" And 12 Row 30"/36"/38" G Hex Head Cap Screw, ½"-13 x 1 ½", 16 Row 30" G Lock Washer, ½", 16 Row 30" 2. GD Wear Pad, Nylatron, 4" x 4" GD Shim, 4" x 4" 3. G External Washer 4. GD Shaft, 1 ¼" x 6 ⅜", 8 Row 36"/38" And 12 Row 30"/36"/38" GD Shaft, 1 ¼" x 7 ⅜", 16 Row 30" 5. GA Tongue Hook W/Grease Fittings, 8/12 Row GA Tongue Hook W/Grease Fittings,16 Row G Grease Fitting, ⅛" NPT 6. GD Pin, 1 ¼" x 12", 8/12 Row GD Pin, 1 ¼" x 14 ½", 16 Row G Cotter Pin, ⅜" x 2" 7. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Strip, ⅜" 8. See Hose Take-Up, Pages P50 And P51 9. G Hex Head Cap Screw, ½"-13 x 3 ½" G Lock Nut, ½" G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Hose Clamp 12. G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Washer, ⅜" USS G Lock Nut, ⅜" GD Shield (If Applicable) 14. GD Pin, 1 ¼" x 5 ⅛" G Cotter Pin, 3 16" x 2" 15. G Square Head Set Screw, 5 16"-18 x ¾" 16. GB Shoe 17. GD Shaft, 1 ¼" x 7", 8/12 Row GD Shaft, 1 ¼" x 8", 16 Row 18. A Inner Hitch, 145 ⅜", 8 Row 36"/38" (Non-Stock Item) A Inner Hitch, 169 ⅜", 12 Row 30" (Shown) (Non-Stock Item) A Inner Hitch, 191 ⅝", 12 Row 36"/38" (Non-Stock Item) A7426 Inner Hitch, 205 ⅜", 16 Row 30" (Non-Stock Item) See Tongue Cylinder, Pages P87-P See Tongue Lock Cylinder, Page P GD U-Bolt, 2 ⅛" x 1 ⅞" x ⅜"-16 G Lock Washer, ⅜" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" SAE G Serrated Flange Nut, ½" GD Sleeve 24. GD Shim, 2 ½" x 10", 7 Gauge GD Shim, 2 ½" x 10", 10 Gauge GD Shim, 2 ½" x 10", 12 Gauge GD Shim, 2 ½" x 10", 14 Gauge 25. GD Shield (If Applicable) 26. GD Hose Clamp, 9 16" x 2 ½" x 2" G Lock Nut, ⅜" GD Rubber Strip, ⅜" GD Hose Clamp, ⅞" x 3" x 5 ⅜" G Lock Nut, ½"-13 P47 Rev. 7/09

48 INNER HITCH, T PHA035/PHA036(TWL3f) P48 8/08

49 INNER HITCH, T 1. G Hex Head Cap Screw, ½"-13 x 1", 8 Row 36"/38" And 12 Row 30" G Hex Head Cap Screw, ½"-13 x 1 ½", 12 Row 36"/38" And 16 Row 30" G Lock Washer, ½", 12 Row 36"/38" And 16 Row 30" 2. GD Wear Pad, Nylatron, 4" x 4" GD Shim, 4" x 4" 3. G External Washer 4. GD Shaft, 1 ¼" x 6 ⅜", 8 Row 36"/38" And 12 Row 30" GD Shaft, 1 ¼" x 7 ⅜", 12 Row 36"/38" And 16 Row 30" 5. GA Tongue Hook W/Grease Fittings, 8 Row 36"/38" And 12 Row 30" GA Tongue Hook W/Grease Fittings,12 Row 36"/38" And 16 Row 30" G Grease Fitting, ⅛" NPT 6. GD Pin, 1 ¼" x 12", 8 Row 36"/38" And 12 Row 30" GD Pin, 1 ¼" x 14 ½", 12 Row 36"/38" And 16 Row 30" G Cotter Pin, ⅜" x 2" 7. - See Hose Take-Up, Pages P50 And P51 8. GD Pin, 1 ¼" x 5 ⅛" G Cotter Pin, 3 16" x 2" 9. G Square Head Set Screw, 5 16"-18 x ¾" 10. GB Shoe 11. GD Shaft, 1 ¼" x 7", 8 Row 36"/38" And 12 Row 30" GD Shaft, 1 ¼" x 8", 12 Row 36"/38" And 16 Row 30" 12. A Inner Hitch, 121 ⅝", 8 Row 36"/38" (Non-Stock Item) A Inner Hitch, 145 ⅜", 12 Row 30" (Shown) (Non-Stock Item) A Inner Hitch, 183 ⅛", 12 Row 36"/38" And 16 Row 30" (Non-Stock Item) See Tongue Cylinder, Pages P87-P See Tongue Lock Cylinder, Page P GD U-Bolt, 2 ⅛" x 1 ⅞" x ⅜"-16 G Lock Washer, ⅜" G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 3 ¼" G Washer, ½" SAE G Serrated Flange Nut, ½" GD Sleeve 18. GD Shim, 2 ½" x 10", 7 Gauge GD Shim, 2 ½" x 10", 10 Gauge GD Shim, 2 ½" x 10", 12 Gauge GD Shim, 2 ½" x 10", 14 Gauge P49 Rev. 7/09

50 HOSE TAKE-UP PHA039(TWL137TWL137f) P50 8/08

51 HOSE TAKE-UP 1. G Carriage Bolt, ⅝"-11 x 2" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Take-Up, 28 ¼", 8 Row 36"/38" Y Hitch GA Take-Up, 44 ¼", 8 Row 36"/38" T Hitch And 12 Row 30" Y Hitch (Shown) GA Take-Up, 56 ¼", 12 Row 30" T Hitch, 12 Row 36"/38" And 16 Row 30" Y Hitch GA Take-Up, 67 ⅝", 12 Row 36"/38" And 16 Row 30" T Hitch 3. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Strip, ⅜" 4. G Hex Head Cap Screw, ½"-13 x 2 ¼" G Hex Head Cap Screw, ½"-13 x 2 ½" G Lock Nut, ½" G Hex Head Tap Bolt, ½"-13 x 3 ½" G Lock Nut, ½" GA Take-Up, 28 ¼", 8 Row 36"/38" Y Hitch GA Take-Up, 44 ¼", 8 Row 36"/38" T Hitch And 12 Row 30" Y Hitch (Shown) GA Take-Up, 67 ⅝", 12 Row 36"/38" And 16 Row 30" T Hitch 7. GD Cover, 8 Row 36"/38" T Hitch, 12 Row 30"/36"/38" Y / T Hitch And 16 Row 30" Y / T Hitch (Shown) GD Cover, 8 Row 36"/38" Y Hitch 8. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" SAE G Serrated Flange Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 5" G Washer, ⅜" USS G Lock Nut, ⅜" See Valve Block - Located On Hitch, Pages P94 And P GA Take-Up, 56 ¼", 12 Row 30" T Hitch And 12 Row 36"/38" And 16 Row 30" Y Hitch P51 8/08

52 CENTER FRAME PFA070/VVB034(TWL138b) 12 ROW 30" SHOWN P52 8/08

53 CENTER FRAME 1. G Hex Nut, ½"-13 G Hex Socket Set Screw, ½"-13 x 1 ¼" 2. G Machine Bushing, 3 ⅛" x 2 ⅛" x 3 16" (As Required) G Machine Bushing, 2 ⅛", 10 Gauge (As Required) G Machine Bushing, 2 ⅛", 14 Gauge (As Required) 3. GD Hinge Pin, 2 ⅛" x 25 ¾" 4. GD Adjustment Block 5. G Hex Head Cap Screw, ¾"-10 x 3 ¾" G Washer, ¾" USS G Lock Nut, ¾" GA Safety Hook 7. GD Pin, 1 ¼" x " 8. G Washer, ⅝" SAE G Lock Nut, ⅝" GD Spring 10. GD Pin, 1 ¼" x 6" 11. GA Spring Rod 12. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Washer, ½" SAE G Lock Washer, ½" GD Sleeve, ½" x ½" Long 13. GA Pad Holder W/Bars GD Bar, 1 ¼" x 6" x ¼" Thick GD Bar, 1 ¼" x 6" x ⅜" Thick G Hex Head Cap Screw, ⅜"-16 x 1" 14. GD Wear Pad, 7" x 7" x ½" Thick 15. GD Special Washer, ⅝", Hardened G Hex Nut, ⅝" GD Cap 17. GD Hose Clamp, ⅞" x 3" x 5 ⅜" GD Rubber Strip, ⅜" 18. G Hex Head Cap Screw, ½"-13 x 2 ½" G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ¾"-10 x 3", Full Thread G Hex Nut, ¾" See Valve Blocks - Located On R.H. Rear Center Frame, Page P A Frame W/Cam Follower Mounts, 136" (Non-Stock Item) GA Cam Follower Mount, L.H. GA Cam Follower Mount, R.H. 22. G Hex Head Cap Screw, ¾"-10 x 2" 23. GB Spring Washer 24. GD Sleeve 25. GA Cam Follower W/Grease Fitting G Grease Fitting, ¼" GD Valve Box Mount (If Applicable) 27. GD U-Bolt, 5 16"-18 (If Applicable) G Hex Nut, 5 16"-18 (If Applicable) G Lock Washer, 5 16" (If Applicable) 28. See Valve Box Module, Pages P102 and P103 (If Applicable) 29. G Hex Head Cap Screw, ¼"-20 x 1" (If Applicable) G Lock Washer, ¼" (If Applicable) GD Sleeve, ½" Long (If Applicable) G Hex Nut, ¼"-20 (If Applicable) P53 Rev. 7/09

54 HYDRAULIC DRIVE PACKAGE OPTION (VI55a) P54 Rev. 7/09

55 HYDRAULIC DRIVE PACKAGE OPTION 1. GD U-Bolt, 3" x 3" x ½"-13 G Hex Nut, ½" GD Spacer 3. GA Motor Bracket 4. G Flangette 5. G Bearing, ⅞" Hex Bore, Spherical 6. G Hex Head Cap Screw, ⅜"-16 x ¾" 7. GD Hex Spacer 8. G Machine Bushing, ½" x 1 32", 10 Gauge 9. See Valve Block - Located On L.H. Rear Center Frame, Pages P G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Washer, 5 16" G Hex Nut, 5 16" G Hex Head Cap Screw, ¼"-20 x 1 ½" G Lock Nut, ¼"-20, Grade B 12. G Hex Head Cap Screw, ⅝"-11 x 4" G Hex Nut, ¼" G Hex Head Cap Screw, ½"-13 x 1 ½" G Hex Nut, ½" G Chain, No. 40, 84 Pitch Including Connector Link GR Connector Link, No GD Spring 16. GA Idler W/Sprocket And Hardware GA Sprocket W/Bearing, 19 Tooth G Hex Head Cap Screw, ½"-13 x 1 ½" G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade 2 GD Idler Arm 17. GA Sprocket, 15 Tooth 18. GD Coupler, 1" I.D. 19. G Chain, Double No. 40, 16 Pitches GR Connector Link, Double No GD Coupler, ⅞" Hex 21. G Hex Head Cap Screw, ⅜"-16 x 1" G Hex Nut, ⅜" GA Sprocket, 23 Tooth 23. GA Hanger Bearing, ⅞" Hex Bore 24. GA Hex Lock Clamp Assembly 25. GA Encoder Module 26. G Hex Socket Set Screw, ¼"-20 x ⅜" 27. GA Hex Adapter Encoder 28. GD Encoder Bracket 29. GD Carrier Bracket 30. GD Hex Shaft, ⅞" x 54 ¾" (No Holes), 12 R 30" P55 8/08

56 WING FRAME (TWL180a/TWL139g) WITH INTERPLANT PACKAGE OPTIONS NOTE: Installed On Even-Row Push Row Unit 1. GA Light Bracket (Wide Row Sizes Only) 2. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" SAE G Serrated Flange Nut, ⅜" GD Light Bracket (Wide Row Sizes Only) 5. G Hex Head Cap Screw, ¼"-20 x 1" G Lock Nut, ¼"-20, Grade B 6. - See Electrical Components, Pages P104 And P105 P56 Rev. 7/09

57 WING FRAME 7. GD Hose Clamp, 9 16" x 2 ½" x 2" 8. G Lock Nut, ⅜" GD Pin, 1 ¼" x 9" G Cotter Pin, ¼" x 2" 10. A Wing, R.H., 75 ½", 8 Row 36"/38" (Non-Stock Item) A Wing, L.H., 75 ½", 8 Row 36"/38" (Non-Stock Item) A Wing, R.H., 119 ¼", 12 Row 30" (Non-Stock Item) A Wing, L.H., 119 ¼", 12 Row 30" (Non-Stock Item) A Wing, R.H., 152", 12 Row 36"/38" (Non-Stock Item) A Wing, L.H., 152", 12 Row 36"/38" (Non-Stock Item) A Wing, R.H., 179 ¼", 16 Row 30" (Two Wheel Towers Per Wing) (Non-Stock Item) A Wing, L.H., 179 ¼", 16 Row 30" (Two Wheel Towers Per Wing) (Non-Stock Item) 11. GA Link 12. GD Strap, 56", 8 Row 36"/38" And 12 Row 36"/38" GD Strap, 41", 12 Row 30" And 16 Row 30" 13. GD Pin, 1 ¼" x 10 ½" G Machine Bushing, 1 ¼", 10 Gauge G Cotter Pin, ¼" x 2" 14. GA Toggle Link 15. GD Pin, 1 ¼" x 7" G Machine Bushing, 1 ¼", 10 Gauge G Cotter Pin, ¼" x 2" See Wing Lock Cylinder, Page P GD Pin 1 ¼" x 7" G Spring Pin, ¼" x 2" 18. GD Bracket 19. GD Pin, 1 ¼" x 5 ½" G Cotter Pin, ¼" x 2" 20. G Detent Pin, ½" x 3 ½" Grip 21. GD Push Row Unit Light Bracket 22. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 3 ½" G Lock Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 6 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GD Mounting Bracket 26. G Carriage Bolt, ⅜"-16 x 1" G Serrated Flange Nut, ⅜" GD Light Mount Extension 28. G Hex Head Cap Screw, ¼"-20 x 1" G Lock Washer, ¼" G Hex Nut, ¼" GA Light Bracket 30. GB Light Mount Bracket A. G7698X - Push Row Unit Mounted Light Bracket Package (Items 21 And 22 On This Page And 42" Harness Extension, Item 5 On Pages P104 And P105) P57 Rev. 7/09

58 CENTER PIVOT PFA067/PFA068(TWL7c) P58 8/08

59 CENTER PIVOT 1. - See Center Lift Cylinder, Page P84 2. GA Hook Strap 3. GD Sleeve, 3 ⅝" GD Sleeve, " 4. G Hex Head Cap Screw, ⅝"-11 x 5 ½" G Lock Nut, ⅝" G Carriage Bolt, ⅝"-11 x 2" G Lock Nut, ⅝" G Hex Head Cap Screw, ¾"-10 x 2 ½" GD Special Washer, 25 32" I.D. x 1 ¼" O.D., Hardened 7. GA Pin, 2 ⅛" 8. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GR Pin, 1" x 3 ½" GR Hair Pin Clip 10. GA Center Post 11. G Hex Head Cap Screw, ⅞"-9 x 3", Grade 8 GD Hardened Washer, ⅞" G Hex Nut, ⅞"-9, Grade GA Cone 13. GA Bearing Housing W/Cups, Less Grease Fitting GD Cup G Grease Fitting, 90, ¼" GD Shim,.005" Thick (As Required) GD Shim,.020" Thick (As Required) GD Shim,.007" Thick (As Required) 15. GD O-Ring 16. GD Bearing Cap P59 Rev. 7/09

60 AXLE ASSEMBLY HTA043/HTA044/PFA071/PHA033/PHA034/PFA073(TWL140cc) P60 8/08

61 AXLE ASSEMBLY 1. GD Lynch Pin, ¼" 2. G Hex Head Cap Screw, ¾"-10 x 2 ¾" G Hex Head Cap Screw, ¾"-10 x 3" G Lock Washer, ¾" G Hex Nut, ¾" GA Manual Safety Lockup W/Detent Pin GA Detent Pin W/Chain 4. GA Bulkhead Mount 5. GD Pin G Lock Washer, 7 16" G Hex Nut, 7 16" GA Cable, 8 Row 36"/38" And 12 Row 36"/38" GA Cable Assembly, 12 Row 30" And 16 Row 30" 7. G Lock Washer, ½" G Hex Nut, ½" G Lock Nut, ¾"-16 G Lock Nut, ⅞" GD Pin, 1 ¼" x 5 ¼" G Machine Bushing, 1 ¼", 10 Gauge G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Lock Nut, ⅜" See Rotation Cylinder, Page P G Hex Head Cap Screw, ¾"-8 x 2 ½", Grade 8, Y Hitch G Hex Head Cap Screw, ¾"-10 x 3 ½", Grade 8, T Hitch GD Special Washer, 25 32" I.D. x 1 ¼" O.D., Hardened G Hex Nut, ¾" GD Pin, 1 ¼" x 5 ¼", All Sizes G Cotter Pin, ¼" x 2" 13. GA Axle W/Stub Axle, 12 Row 30" And 16 Row 30" GA Stub Axle, Narrow Row GA Axle W/Stub Axle, 8 Row 36"/38" And 12 Row 36"/38" GA Stub Axle, Wide Row 14. GD Scraper 15. G Carriage Bolt, ½"-13 x 1 ½" G Serrated Flange Nut, ½" G Hex Head Cap Screw, 1"-8 x 10", Grade 8, Y Hitch G Hex Head Cap Screw, 1"-8 x 11", Grade 8, T Hitch GD Special Washer, " I.D. x 2" O.D. G Hex Nut, 1"-8, Grade G Carriage Bolt, ½"-13 x 1 ½" G Lock Washer, ½" G Hex Nut, ½" GD Cable Guard (If Applicable) P61 Rev. 7/09

62 TRANSPORT WHEELS/ROCK GUARDS HTA032/HTA040/HTA043/HTA004(TWL141c) P62 8/08

63 TRANSPORT WHEELS/ROCK GUARDS (Per Assy.) 1. G Hex Head Cap Screw, ⅞"-9 x 3", Grade 8 G Lock Washer, ⅞" 2. GA Spindle W/Retaining Ring, 1 ¾" G External Retaining Ring, 2 ½" 3. GA Seal 4. GA Bearing 5. GA Hub W/Cups, Bolts, Nuts And Grease Fitting, 8 Bolt, 1 ¾" Bore G Grease Fitting, ¼"-28 GD Cup GR Stud Bolt, ⅝"-12 x 2 ¼", Grade 8 6. GD Special Nut, 1 ¾"-12 UNF 7. GD Special Hex Nut, 1 ¾"-12 UNF 8. GA Rim, 5.5" x 22.5", All Sizes 9. GD Tire, R 22.5" W/O Center Rib, Tubeless (Specify Brand*) 10. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Lock Washer, ½" G Hex Nut, ½" GA Rock Guard (Optional) 12. GA Valve Stem 13. GD Lug Bolt, ⅝"-18 x 2 ¾" (If Applicable) 14. GD Jump Start Wheel (If Applicable) 15. G Hex Head Cap Screw, ¼"-20 x ⅝" (If Applicable) G Lock Washer, ¼" (If Applicable) G Hex Nut, ¼"-20 (If Applicable) 16. GD Sensor Bracket Cover (If Applicable) 17. GA Hall Effect Sensor (If Applicable) 18. GA Sensor Bracket (If Applicable) A. GA Tire And Rim Assembly (Items 8, 9 And 12) (Specify Brand*) B. GA Sensor Bracket Assembly (Items 15-18) (If Applicable) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. P63 Rev. 7/09

64 CONTACT WHEEL AND DRIVE SHAFT(S) (PLTR155/TWL11e/TWL11k/PLTR150/TWL11f) 16 Row 8/12 Row P64 8/08

65 CONTACT WHEEL AND DRIVE SHAFT(S) (TWL157/TWL156) See Pages P68 And P69 See Pages P68 And P69 8/12 Row (L.H. Side) 16 Row (L.H. Side) (Per Assy.) 1. GD SMV Sign 2. G Hex Head Cap Screw, ¼"-20 x 1" G Serrated Flange Nut, ¼" GD Bracket 4. GD Cover 5. GD Spring 6. - See Hydraulic Hoses And Fittings On Planter Frame, Pages P100 And P See Inner Module Drive, Page P71 8. GD Hex Shaft, ⅞" x 13", See Point Row Clutch, Pages P72-P75 For 8 And 12 Row Machines Equipped With Point Row Clutches 9. G Spring Pin, ¼" x 1 ½" 10. G Hex Head Cap Screw, ⅜"-16 x 10" (Used To Secure Point Row Clutch) G Lock Nut, ⅜" GA Sprocket, 30 Tooth 12. G Machine Bushing, 1 ½" x 1 32", 10 Gauge G Machine Bushing, 1", 14 Gauge 13. G Hex Head Cap Screw, ⅝"-11 x 4" G Hex Nut, ⅝"-11 G Lock Nut, ⅝" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GA Pin, 2 ⅛" 16. G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" See Wing Lift Cylinder, Page P GA Spring W/Plug 19. GD Lynch Pin, ¼" 20. GA Sprocket, 30 Tooth GA Sprocket, 15 Tooth, Half Rate (2 To 1) Drive (Continued On Following Page) B B P65 Rev. 7/09

66 CONTACT WHEEL AND DRIVE SHAFT(S) (Per Assy.) (Continued) 21. GD Hex Shaft, ⅞" x 11 ¾" (2 Holes) 22. GA Flanged Bearing, ⅞" Hex Bore 23. G Carriage Bolt, 5 16"-18 x 1" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Idler W/Sprocket And Hardware, L.H. Side Of Planter GA Idler W/Sprocket And Hardware, R.H. Side Of Planter GA Sprocket W/Bearing, 19 Tooth G Hex Head Cap Screw, ½"-13 x 1 ½" G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade G Hex Head Adjusting Bolt, ½"-13 x 4", Grade 2 G Hex Jam Nut, ½"-13, Grade GD Tire, 4.80" x 8", 4 Ply, Rib Implement (Specify Brand*) GD Valve Stem 27. GA Rim, 3.75" x 8" 28. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 29. GA Wheel Arm 30. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 31. GD Shield 32. G Hex Head Cap Screw, ⅝"-11 x 1 ¼" G Machine Bushing, ⅞", 14 Gauge GD Special Washer, ⅝", Hardened GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long G Lock Nut, ⅝" GA Slip Joint Assembly 34. G Hex Head Cap Screw, ¼"-20 x 1" G Serrated Flange Nut, ¼" GD Hex Shaft, ⅞" x 29 ⅝" 36. G Cotter Pin, 3 16" x 1" 37. GD Spring 38. GA Block And Hub Assembly 39. GD L-Pin 40. GA Sprocket, 30 Tooth 41. G External Retaining Ring, 1 ¼" 42. G Chain, No. 40, 110 Pitch Including Connector Link, Half Rate (2 To 1) Drive G Chain, No. 40, 118 Pitch Including Connector Link GR Connector Link, No GD Coupler, 1 ¾", 16 Row Only See Point Row Clutch, Pages P72-P75 A. GA Tire And Rim Assembly (Items 26 And 27) (Specify Brand*) B. GA Ratchet/Sprocket Assembly, L.H. Side Of Planter (Items 36-41) GA Ratchet/Sprocket Assembly, R.H. Side Of Planter (Items 36-41) C. G1K324 - Contact Wheel Arm Replacement Kit (Items 9, 21-23, 25, 28 And 29) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Different brand tires may have different diameters. Change in tire brand may affect rates. Field checks are recommended after any change in contact tires. P66 Rev. 7/09

67 GROUND DRIVE WHEEL PTD057(TWL142c/TWL142d) ITEM PART NO. QTY. (Per Assy.) DESCRIPTION 1. GD Pin, 1 ¼" x 13 ¼" 2. GA Wheel Module 3. G Spring Pin, ⅜" x 2" 4. GD Pin, 1 ¼" x 5 ⅝" G Washer, 1 ¼" SAE G Cotter Pin, ¼" x 2" 5. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" 6. G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" G Hex Nut, ¾" GD Scraper Arm (If Applicable) 8. GA Spindle W/Round External Retaining Ring, 10" GD Round External Retaining Ring 9. GA Bearing 10. GR Lug Bolt, 9 16" GA Hub W/Cups, 6 Bolt GR Cup 12. G Hex Jam Nut, 1 ½"-12, Grade GD Tire, 7.50" x 20", 8 Ply, Tubeless W/O Center Rib (Specify Brand*) 14. GA Valve Stem 15. GA Rim, 5.5" x 20" 16. GD Bar Clamp (If Applicable) 17. G Hex Head Cap Screw, ½"-13 x 1 ½" G Hex Head Cap Screw, ½"-13 x 1 ¾" G Lock Washer, ½" G Hex Nut, ½" G Carriage Bolt, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GD Scraper 20. GA Scraper A. GA Tire And Rim Assembly (Specify Brand*)(Items 13-15) B. GA Hub And Spindle Assembly (Items 8, 9, 11 And 12) * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. P67 8/08

68 SEED RATE TRANSMISSION AND ROW UNIT DRILL SHAFTS (TWL14o) 8/12 Row Shown (Per Side) 1. GD Shaft, ⅞" x 15" 2. GD Lynch Pin, ¼" 3. GA Sprocket, 17 Tooth GA Sprocket, 19 Tooth GA Sprocket, 23 Tooth GA Sprocket, 24 Tooth GA Sprocket, 25 Tooth GA Sprocket, 26 Tooth GA Sprocket, 27 Tooth GA Sprocket, 28 Tooth 4. G Spring Pin, ¼" x 1 ½" 5. G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" 6. G Hex Head Cap Screw, 5 16"-18 x 2 ¾" GD Sleeve, 1" O.D. x 9 16" I.D. x ⅞" G Lock Washer, ½", Internal/External G Lock Nut, ½" GD Spring 8. GA Sprocket Storage Rod 9. GB Coupler See Inner Module Drive, Page P GD Coupler, 1 ¾", 16 Row Only 12. GD Hex Shaft, ⅞" x 31 ⅜", 16 Row Only 13. G Square Head Set Screw, 5 16"-18 x ¾" 14. G Square Head Set Screw, ⅜"-16 x ⅝" 15. GD Shear Coupler 16. G Cotter Pin, 3 16" x 2" 17. G Chain, No. 40, 80 Pitch Including Connector Link GR Connector Link, No GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth G Hex Head Cap Screw, ⅜"-16 x 1 ¾" GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" P68 Rev. 7/09

69 SEED RATE TRANSMISSION AND ROW UNIT DRILL SHAFTS (Per Side) 19. GD Shaft, ⅞" x 13 ½" 20. G Carriage Bolt, 5 16"-18 x 1" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Special Bearing 22. G Flangette 23. G Bearing, ⅞" Hex Bore, Spherical 24. GA Sprocket, 19 Tooth, Interplant Package Drive 25. GD Lock Clamp 26. GD Hex Shaft, ⅞" x 58 ½" (No Holes), Wing, 8 Row 36"/38" GD Hex Shaft, ⅞" x 106 ½" (No Holes), Wing, 12 Row 30" GD Hex Shaft, ⅞" x 134 ½" (No Holes), Wing, 12 Row 36"/38" GD Hex Shaft, ⅞" x 166 ¾" (No Holes), Wing, 16 Row 30" 27. GA Hanger Bearing, ⅞" Hex Bore 28. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 29. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 30. GA U-Joint W/Grease Fitting, Female, 18 ⅛" Long, 8 Row 36"/38" And 12 Row 36"/38" GA U-Joint W/Grease Fitting, Female, 10 ¼" Long, 12 Row 30" And 16 Row 30" GR Grease Fitting, 45, Metric GR Inboard Yoke And Outer Profile (18 ¼" U-Joint) GR Inboard Yoke And Outer Profile (10 ¼" U-Joint) GR Cross And Bearing Kit GR Yoke, ⅞" Hex 31. GA U-Joint W/Grease Fitting, Male, 12 ¼ " Long GR Grease Fitting, 45, Metric GR Inner Profile GR Inboard Yoke GR Spring Pin, 8mm x 50mm GR Cross And Bearing Kit GR Yoke, ⅞" Hex 32. GD Hex Shaft, ⅞" x 53" (No Holes), R.H. Main Frame, 8 Row 36"/38" And 12 Row 36"/38" GD Hex Shaft, ⅞" x 44" (No Holes), L.H. Main Frame, 8 Row 36"/38" And 12 Row 36"/38" GD Hex Shaft, ⅞" x 45" (No Holes), R.H. Main Frame, 12 Row 30" And 16 Row 30" GD Hex Shaft, ⅞" x 35" (No Holes), L.H. Main Frame, 12 Row 30" And 16 Row 30" GD Hex Shaft, ⅞" x 38" (No Holes, L.H. Main Frame, 12 Row 30" And 16 Row 30" 33. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Tightener Shaft, 3 ⅜" 35. GD Handle 36. G Vinyl Cap 37. G Hex Socket Button Head Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS 38. G Machine Bushing, ⅞", 14 Gauge 39. G External Inverted Snap Ring, 1 ½" 40. G External Inverted Snap Ring, ⅞" 41. GD Sleeve, 1 ¼" 42. GD Torsion Spring, R.H. (Used On L.H. Wrap Spring Wrench)(Shown) GD Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 43. GD Release Collar, L.H. (Shown) GD Release Collar, R.H. A. G1K269 - Lock Clamp Kit (Items 25 And 28) B. G1K381 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 34-43) (Shown) G1K380 1 Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 34-43) P69 Rev. 7/09

70 BOLT-ON WHEEL MODULE/TRANSPORT LATCH CATCH PFA072(TWL15a) 8 Row 36"/38" 12 Row 36"/38" (Per Side) 1. GD U-Bolt, 5" x 7" x ¾"-10 G Lock Washer, ¾" G Hex Nut, ¾" GA Wheel Tower W/Grease Fitting, L.H. GA Wheel Tower W/Grease Fitting, R.H. G Grease Fitting, ¼" GA Transport Latch Catch 4. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" P70 8/08

71 INNER MODULE DRIVE PTD058/PFA046/PTD077(TWL16e) 16 Row (Per Module) 1. - See Seed Rate Transmission And Row Unit Drill Shafts, Pages P68 And P See Contact Drive Wheel And Drive Shaft(s), Pages P64-P66 3. G Hex Head Cap Screw, ⅝"-11 x 3 ¾" G Machine Bushing, ⅝", 14 Gauge (As Required) G Hex Nut, ⅝"-11 G Lock Nut, ⅝" GA Idler W/Sprocket And Hardware, L.H. Side Of Planter GA Idler W/Sprocket And Hardware, R.H. Side Of Planter GA Sprocket W/Bearing, 18 Tooth G Hex Head Cap Screw, ½"-13 x 3" GD Spacer, 1 ⅛" Long G Washer, ½" SAE G Lock Nut, ½" GD Spring 6. GA Sprocket, 50 Tooth 7. G Hex Head Cap Screw, ½"-13 x 2 ¼" GD Bushing, 1" O.D. x 9 16" I.D. x 7 16" Long G Machine Bushing, ½", 7 Gauge G Washer, ⅝" SAE G Lock Nut, ½" GA Sprocket W/Bearing, 18 Tooth 9. GA Sprocket, 28 Tooth 10. G Spring Pin, ¼" x 1 ½" 11. G Chain, No. 40, 100 Pitch Including Connector Link GR Connector Link, No G Clevis Pin, ⅜" x 1" G Retaining Ring, ⅜" P71 Rev. 7/09

72 POINT ROW CLUTCH PRC019(TWL70d/TWL71d/TWL71/TWL18/A10054) L.H. Point Row Clutch Shown (Used On L.H. Side Of Planter) Input Shaft Connects To Clutch Solenoid Connects To Planter Harness At Valve Block On Rear Center Frame On Point Row Clutch P72 8/08

73 POINT ROW CLUTCH (Per Assy.) 1. GD Input Shaft, R.H. Threads (Shown) GD Input Shaft, L.H. Threads 2. G Hex Socket Head Screw, ¼"-20 x 1" G Lock Washer, ¼" 3. G External Inverted Snap Ring, 1 ½" 4. GD V-Ring Seal 5. GD Input Hub 6. GA Hub/Sleeve Assembly W/Spring Pins G Spring Pin, ¼" x 1" G Spring Pin, 5 32" x ⅞" 7. G Hex Head Cap Screw, ¼"-20 x ¾" G Lock Washer, ¼" G Hex Nut, ¼" GA Solenoid Complete GR Snap Ring GR Spring GR Boot GR Plunger 9. G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Hex Nut, ⅜"-16 G Washer, ⅜" SAE G Lock Washer, ⅜" G Hex Jam Nut, ⅜"-16, Grade G Hex Socket Head Cap Screw, ¼"-20 x 1 ¾", Grade 8 G Lock Washer, ¼" G Hex Nut, ¼" GD Spring 12. GD Mounting Plate 13. GD Bushing 14. GD Coupler W/R.H. Threads (Shown) GD Coupler W/L.H. Threads 15. GD Felt Washer 16. GD Spring, L.H. (Shown) GD Spring, R.H. 17. GD Stop Collar 18. GD Rue Ring Cotter, 5 16" 19. GD Actuator Arm 20. G Spring Pin, 3 16" x 2 ¼" 21. G Hex Socket Head Cap Screw, No x ½" G Lock Washer, No GD Hex Shaft, ⅞" x 13" 23. GA Wiring Harness, 192", R.H. Side, 8 Row 36"/38" GA Wiring Harness, 228", L.H. Side, 8 Row 36"/38" And R.H. Side, 12 Row 30" GA Wiring Harness, 264", L.H. Side, 12 Row 30" And R.H. Side, 12 Row 36"/38" GA Wiring Harness, 312", L.H. Side, 12 Row 36"/38" GA Wiring Harness, 252", R.H. Side, 16 Row 30" GA Wiring Harness, 300", L.H. Side, 16 Row 30" 24. GA Ground Cable, Green 25. G Fork Terminal 26. GD Lock Wire, 10", Stainless Steel 27. G Spring Pin, 3 16" x 1 ¼" A. GA Point Row Clutch Assembly, R.H. (R.H. Side Of Machine) (Items 1-21, 24, 26 And 27) GA Point Row Clutch Assembly, L.H. (L.H. Side Of Machine) (Items 1-21, 24, 26 And 27) P73 8/08

74 TWO-SPEED POINT ROW CLUTCH PRC023(FF47b/A7274/TWL71/TWL18/A10054) L.H. Two-Speed Point Row Clutch Shown (Used On L.H.Side Of Planter) Input Shaft Jumper Wire Between Point Row Clutch Solenoids Connects To Planter Harness At Valve Block On Rear Center Frame Connects To Clutch Solenoids P74 8/08

75 TWO-SPEED POINT ROW CLUTCH (Per Assy.) 1. GD Threaded Rod, ¼"-20 x 3 ½" G Hex Nut, ¼"-20 G Lock Washer, ¼" GD Allen Nut, ¼" G Hex Head Cap Screw, ¼"-20 x ¾" G Lock Washer, ¼" G Hex Nut, ¼" GD Threaded Rod, ⅜"-16 x 4 ¼" G Lock Nut, ⅜"-16 G Lock Washer, ⅜" G Hex Nut, ⅜" GD Spring 5. GA Hub/Sleeve Assembly W/Seals, Sleeve, Pins And Screws GD Seal GD Sleeve G Hex Socket Set Screw, 5 16"-18 x ¾" G Hex Socket Set Screw, 5 16"-18 x ¼" G Spring Pin, 5 32" x ⅞" G Spring Pin, ¼" x 1" 6. GD Actuator Arm 7. GD Bushing 8. GA Solenoid Complete GR Snap Ring GR Spring GR Boot GR Plunger 9. GD Mounting Plate 10. G Spring Pin, 3 16" x 2 ¼" 11. G Hex Socket Head Screw, No x ¼" 12. GD Spring, L.H. (Shown) 13. GD Stop Collar 14. GD Felt Washer 15. GA Hub W/Seal GD Seal 16. G External Inverted Snap Ring, 1 ½" 17. GD Output Sprocket, 28 Tooth 18. GD Rue Ring Cotter, 5 16" 19. G Hex Socket Head Screw, ¼"-20 x 1" GD Key 20. GD Input Shaft, R.H. Threads (Shown) GD Input Shaft, L.H. Threads 21. GD Input Sprocket, 28 Tooth 22. GD Coupler W/R.H. Threads (Shown) GD Coupler W/L.H. Threads 23. GA Hub W/Seal GD Seal 24. G Fork Terminal 25. GD Contact 26. GD Housing, Black GD Housing, Red 27. GA Jumper Wire W/Ring Terminals, " 28. GA Wiring Harness, 228", R.H. And L.H. Sides, 8 Row 36"/38" And R.H. Side, 12 Row 30" GA Wiring Harness, 264", L.H. Side, 12 Row 30" And R.H. Side, 12 Row 36"/38" GA Wiring Harness, 312", L.H. Side, 12 Row 36"/38" GA Wiring Harness, 252", R.H. Side, 16 Row 30" GA Wiring Harness, 300", L.H. Side, 16 Row 30" 29. GD Spring, R.H. P75 Rev. 7/09

76 TWO-SPEED POINT ROW CLUTCH WHEEL MODULE EXTENSION (TWL77h/TWL84b/TWL79a/TWL80) Output Sprocket TRAVEL See Inner Module Drive Input Sprocket TRAVEL TRAVEL P76 8/08

77 TWO-SPEED POINT ROW CLUTCH WHEEL MODULE EXTENSION (Per Assy.) 1. GD Spring 2. G Spring Pin, ¼" x 1 ½" 3. GA Sprocket, 24 Tooth GA Sprocket, 15 Tooth GA Sprocket, 17 Tooth GA Sprocket, 27 Tooth GA Sprocket, 23 Tooth (From Transmission) GA Sprocket, 25 Tooth (From Transmission) GA Sprocket, 26 Tooth (From Transmission) 4. GA Sprocket, 28 Tooth 5. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 6. G Flangette 7. G Bearing, ⅞" Hex Bore, Spherical 8. G Carriage Bolt, 5 16"-18 x ¾" G Lock Washer, 5 16" G Hex Nut, 5 16" GD Shaft, ⅞" x 13 ¾" 10. GA Extension Bracket 11. G Hex Head Cap Screw, ¼"-20 x 1 ¼" G Washer, ¼" USS G Lock Washer, ¼" G Hex Nut, ¼" G Clevis Pin, 5 16" x ¾" G Retaining Ring, 5 16" 13. G Hex Head Cap Screw, ¼"-20 x 1" G Washer, ¼" USS G Lock Washer, ¼" G Hex Nut, ¼" See Contact Wheel And Drive Shaft(s), Pages P64-P See Two-Speed Point Row Clutch, Pages P74 And P G Chain, No. 40, 74 Pitch Including Connector Link GR Connector Link, No G Chain, No. 40, 100 Pitch Including Connector Link GR Connector Link, No GA Overrunning Sprocket Assembly, R.H. GA Overrunning Sprocket Assembly, L.H. G External Retaining Ring, 1 ¼" GD L-Pin G Spring Pin, 3 16" x 1 ¼" G Cotter Pin, 5 32" x 1" GD Spring GA Block GA Sprocket W/Bushing, 30 Tooth 19. GD Hex Shaft, ⅞" x 13" 20. GA Idler W/Sprocket And Hardware GD Bushing, ¾" Long G Machine Bushing, ½", 14 Gauge G Hex Jam Nut, ½"-13, Grade 2 G Hex Head Cap Screw, ½"-13 x 2 ½" GA Sprocket W/Bearing, 18 Tooth (Continued On Following Page) P77 Rev. 7/09

78 TWO-SPEED POINT ROW CLUTCH WHEEL MODULE EXTENSION (Per Assy.) (Continued) 21. GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" 22. G Hex Head Cap Screw, ⅝"-11 x 4" G Lock Nut, ⅝"-11 G Hex Nut, ⅝" G Hex Head Cap Screw, ⅜"-16 x 10" G Lock Nut, ⅜" G External Inverted Snap Ring, 1 ½" 25. G External Inverted Snap Ring, ⅞" 26. GD Sleeve, 1 ¼" 27. GD Torsion Spring, R.H. (Used On L.H. Wrap Spring Wrench) (Shown) GD Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 28. GD Release Collar, L.H. (Shown) GD Release Collar, R.H. 29. GD Tightener Shaft, 3 ⅜" 30. GD Handle 31. G Machine Bushing, ⅞", 14 Gauge 32. G Hex Socket Button Head Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS 33. G Vinyl Cap 34. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GA Sprocket Storage Rod 36. GD Lynch Pin, ¼" A. G1K381 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 24-33) (Shown) G1K380 1 Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 24-33) P78 8/08

79 ROW MARKER SPINDLE/HUB/BLADE IP1035a (Per Assy.) 1. GA Depth Band 2. GD Disc Blade, Solid, 16" (Shown) GD Disc Blade, Notched, 16" (Optional) 3. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Nut, 5 16"-18, Grade 8 4. GA Hub W/Cups, 4 Bolt (Includes Items 5 and 6) 5. GR Inner Cup 6. GR Outer Cup 7. GA Grease Seal 8. GA Bearing 9. GA Bearing 10. GA Rubber Seal 11. GD Retainer 12. GD Dust Cap 13. G Hex Head Cap Screw, ½"-20 x 1" G Lock Washer, ½" 14. G Cotter Pin, 5 32" x 1" 15. G Slotted Hex Nut, ⅝" G Washer, ⅝" SAE 17. GA Spindle 18. G Carriage Bolt, ½"-13 x 3 ½" G Machine Bushing, ½", 7 Gauge G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 4 ½" G Machine Bushing, ½", 7 Gauge G Lock Washer, ½" G Hex Nut, ½"-13 A. GA Hub And Spindle Assembly, (Items 11-17) P79 Rev. 7/09

80 ROW MARKER ASSEMBLY, 8 ROW 36"/38" AND 12 ROW 30" MKR019/MKR027(MKR14i/A11590) P80 Rev. 7/09

81 ROW MARKER ASSEMBLY, 8 ROW 36"/38"12 ROW 30" (Per Assy.) 1. GA Arm W/Grease Fittings, Second Stage, 110", 12 Row 30" G Grease Fitting, ⅛" NPT GA Arm W/Grease Fittings, Second Stage, 67", 8 Row 36"/38" 2. G Washer, 1 ¼" SAE (As Required) G Machine Bushing, 1 ¼", 10 Gauge (As Required) G Machine Bushing, 1 ¼", 18 Gauge (As Required) 3. GA Pin W/Grease Fitting, 1 ¼" x " G Grease Fitting, ¼"-28 G Cotter Pin, ¼" x 1 ½" 4. GA Arm, First Stage 5. GD Sleeve, 1" 6. GA Safety Lockup W/Detent Pins, 19 ⅜" G Detent Pin, ½" x 2 ½" Grip 7. G Hex Head Cap Screw, ⅝"-11 x 5 ½" (If Applicable) G Hex Head Cap Screw, ⅝"-11 x 5" (If Applicable) G Hex Head Cap Screw, ⅝"-11 x 2" (If Applicable) GD Special Washer, ⅝", Hardened G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" GD Extension Tube, 45", 12 Row 30" GD Extension Tube, 60", 12 Row 30" (L.H. Even-Row Marker) (If Applicable) GD Extension Tube, 65", 8 Row 36"/38" 9. - See Row Marker (Cushion) Cylinder, Page P GD Pin, 1 ¼" x 8 ¼" G Cotter Pin, ¼" x 2" 11. GA Pin W/Grease Fitting, 1 ¼" x 9 ½" G Grease Fitting, ¼"-28 G Cotter Pin, ¼" x 1 ½" 12. GD Shim, 2 ½" x 7 ¼", 16 Gauge (As Required) 13. GA Mount 14. GA Stand, 20" (12 Row 30" Only) 15. GD U-Bolt, 2" x 2" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Bar 17. GD U-Bolt, 3" x 3" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GA Molded Stop, 12 ¼" Long 20. GD Plate, 6" x 6" P81 8/08

82 ROW MARKER ASSEMBLY, 12 ROW 36"/38" AND 16 ROW 30" MKR019/MKR023MKR027(MKR15jj/A11569) P82 8/08

83 ROW MARKER ASSEMBLY, 12 ROW 36"/38" AND 16 ROW 30" (Per Assy.) 1. GA Arm, Second Stage, 138 ¼", 12 Row 36"/38" GA Arm, Second Stage, 172 ¼", 16 Row 30" 2. GD Pin, 1 ¼" x 6 ½" G Cotter Pin, ¼" x 2" 3. G Special Washer, 1 ¼" (As Required) G Machine Bushing, 1 ¼", 10 Gauge (As Required) G Machine Bushing, 1 ¼", 18 Gauge (As Required) 4. GA Pin W/Grease Fitting, 1 ¼" x 13" G Grease Fitting, ¼"-28 G Cotter Pin, ¼" x 1 ½" 5. GA Arm, First Stage 6. GA Safety Lockup W/Detent Pins, 19 ⅜" G Detent Pin, ½" x 2 ½" Grip 7. G Hex Head Cap Screw, ⅝"-11 x 6 ½" (If Applicable) G Hex Head Cap Screw, ⅝"-11 x 6" (If Applicable) G Hex Head Cap Screw, ⅝"-11 x 2 ¼" (If Applicable) GD Special Washer, ⅝", Hardened G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" GD Extension Tube, 75", 12 Row 36"/38" And 16 Row 30" (L.H. Even-Row Marker) (If Applicable) GD Extension Tube, 50", 16 Row 30" 9. - See Row Marker (Cushion) Cylinder, Page P GD Pin, 1 ¼" x 9 ½" G Cotter Pin, ¼" x 2" 11. GA Pin W/Grease Fitting, 1 ¼" x 11 ½" G Grease Fitting, ¼"-28 G Cotter Pin, ¼" x 1 ½" 12. GD Shim, 2 ½" x 12 ½", 16 Gauge (As Required) (Shown) GD Shim, 2 ½" x 8 ¼", 16 Gauge (As Required) 13. GA Mount 14. GA Stand, 30" 15. GD U-Bolt, 2" x 2" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Bar 17. GD U-Bolt, 3" x 3" x ½"-13 G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Nut, ½" GA Molded Stop, 12 ¼" Long 20. G Special Washer, 1 ¼" (As Required) 21. GD Plate, 7" x 7" 22. G Washer, 1 ¼" SAE G Machine Bushing, 1 ¼", 18 Gauge P83 Rev. 7/09

84 ROTATION CYLINDER, ALL SIZES (CYL11i) 1. GA Threaded Ball Joint End 2. G Hex Jam Nut, 1 ¼"-12, Grade 2 3. GD Gland 4. GD Rod 5. GD Piston 6. G Lock Nut, 1 ¼" A Barrel (Non-Stock Item) A. GA Cylinder Complete, 4" x 16" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) U-Cup, (1) Wiper, (1) Seal, (2) Cast Iron Rings, (1) BU Ring, (1) Expander CENTER LIFT CYLINDER, ALL SIZES (CYL39c) Port Type Rephasing 1. GD Clevis 2. G Set Screw, ¼"-20 x ¼" 3. GD Cap 4. GD Rod 5. GD Gland 6. GD Piston 7. G Lock Nut, 1" GA Barrel 9. G Hex Head Cap Screw, ⅜"-16 x 2 ¼" G Lock Nut, ⅜" G6408-H04-O 1 Hex Socket Head Plug W/O-Ring, 7 16"-20 O-Ring GR O-Ring A. GA Cylinder Complete, 3" x 48" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (2) BU Rings, (1) Wiper, (1) U-Cup, (1) Piston Seal, (2) Cast Iron Rings, (1) Expander P84 8/08

85 WING LIFT CYLINDER, 8 AND 12 ROW CYL031/CYL011(CYL45d) ITEM PART NO. QTY DESCRIPTION Port Type Rephasing 1. GA Rod Assembly W/Grease Fitting G Grease Fitting, ¼" GD Gland 3. GD Piston 4. G Lock Nut, 1" A Barrel (Non-Stock Item) A. GA Cylinder Complete, 4 ¼" x 6" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) Wiper, (2) O-Rings, (1) BU Ring, (1) U-Cup, (1) Seal, (2) Cast Iron Rings, (1) Expander WING LIFT CYLINDER, 16 ROW CYL031/CYL011(CYL41c) 1. G Set Screw, ¼"-20 x ¼" 2. GD Cap 3. GA Rod Assembly W/Grease Fitting G Grease Fitting, 3 16", Drive-In 4. GD Gland 5. GD Piston 6. G Lock Nut, 1" A Barrel (Non-Stock Item) Port Type Rephasing A. GA Cylinder Complete, 3" x 6" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (2) BU Rings, (1) Expander, (1) Wiper, (1) U-Cup, (1) Piston Seal, (2) Cast Iron Rings P85 8/08

86 TRANSPORT LATCH CYLINDER, ALL SIZES CYL035/CYL050(CYL9c) 1. G Internal Retaining Ring, " 2. GD Gland 3. GD Rod 4. GD Piston 5. G Lock Nut, ½" D Barrel (Non-Stock Item) 7. GD Tension Bushing, 1" x 2" Long 8. GD End Cap A. GA Cylinder Complete, 1 ½" x 2 ½" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (3) O-Rings, (2) BU Rings, (1) Wiper, (1) T-Seal, (1) Bronze Bushing, (1) Seal, (1) U-Cup TONGUE LOCK CYLINDER, ALL SIZES CYL035(CYL9d) 1. G Internal Retaining Ring, " 2. GD Gland 3. GD Rod 4. GD Piston 5. G Lock Nut, ½" D Barrel (Non-Stock Item) 7. GD Tension Bushing, 1" x 2" Long 8. GD End Cap A. GA Cylinder Complete, 1 ½" x 2 ½" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (3) O-Rings, (2) BU Rings, (1) Wiper, (1) T-Seal, (1) Bronze Bushing, (1) Seal, (1) U-Cup P86 8/08

87 TONGUE CYLINDER, 8 ROW 36"/38" WITH Y HITCH (CYL12f) ¾"-16 O-Ring Port 7/₁6"-20 O-Ring Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7/₁6"-20 O-Ring GR O-Ring 7. A Barrel (Non-Stock Item) 8. GA Steel Hydraulic Line, 44 11/₁6" 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 36" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal P87 8/08

88 TONGUE CYLINDER, 8 ROW 36"/38" WITH T HITCH, 12 ROW 30" WITH Y HITCH (CYL12f) ¾"-16 O-Ring Port 7/₁6"-20 O-Ring Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 7. GA Barrel 8. GA Steel Hydraulic Line, " 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 60" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal P88 8/08

89 TONGUE CYLINDER, 12 ROW 30" WITH T HITCH, 12 ROW 36"/38" AND 16 ROW 30" WITH Y HITCH CYL036(CYL12f) ¾"-16 O-Ring Port 7 16"-20 O-Ring Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 7. GA Barrel 8. GA Steel Hydraulic Line, " 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 84" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal P89 8/08

90 TONGUE CYLINDER, 12 ROW 36"/38" AND 16 ROW 30" WITH T HITCH CYL036(CYL12f) ¾"-16 O-Ring Port 7 16"-20 O-Ring Port 1. GA Rod Assembly 2. GD Gland 3. GD Spacer 4. GD Piston 5. G Lock Nut, 1 ¼" G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 7. GA Barrel 8. GA Steel Hydraulic Line, " 9. G Bulkhead Tube Union, ¾"-16 Male JIC 10. GD Bracket 11. G Lock Nut, ¾" G Hex Head Cap Screw, ⅜"-16 x ⅝" G Lock Washer, ⅜" 13. G Hose Clamp, No. 52 A. GA Cylinder Complete, 3" x 108" (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring, (1) Wear Ring, (1) Wiper, (1) U-Cup, (1) T-Seal P90 8/08

91 WING LOCK CYLINDER, ALL SIZES CYL032(CYL3f) 1. GA Rod Assembly 2. GD Gland 3. A Barrel (Non-Stock Item) 4. GD Piston 5. G Lock Nut, ⅞"-14 A. GA Cylinder Complete, 2 ½" x " (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) T-Seal, (2) O-Rings, (1) BU Ring, (1) U-Cup, (1) Wiper ROW MARKER (Cushion) CYLINDER, ALL SIZES (CYL3d) 1. GA Rod Assembly 2. GD Gland 3. A Barrel (Non-Stock Item) 4. G Cotter Pin, ⅛" x 1 ¾" 5. GD Piston 6. G Slotted Hex Nut, ⅞"-14 A. GA Cylinder Complete, 2 ½" x " (Part Number Stamped On Barrel) B. GR Seal Kit, Includes: (1) T-Seal, (2) O-Rings, (1) BU Ring, (1) Cast Iron Ring, (1) Wiper, (1) U-Cup P91 8/08

92 JUNCTION BLOCK - LOCATED ON R.H. SIDE OF CENTER PIVOT VVB036(TWL24) 1. GD Manifold Block 2. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 3. G Connector W/O-Ring, ⅞"-14 Male JIC To ¾"-16 O-Ring GR O-Ring 4. G Hex Head Cap Screw, ⅜"-16 x 5" G Lock Washer, ⅜" G Hex Nut, ⅜"-16 P92 8/08

93 VALVE BLOCKS - LOCATED ON R.H. REAR CENTER FRAME VVB034(TWL25e) 1. G Hex Head Cap Screw, 5 16"-18 x 2 ¾" G Lock Washer, 5 16" 2. 2 See Check Valve, Page P See Solenoid Valve, Page P GD Block 5. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 6. G Connector W/O-Ring, ⅞"-14 Male JIC To O-Ring GR O-Ring 7. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To ⅞"-14 O-Ring GR O-Ring 8. G Plug W/O-Ring, ¾"-16 O-Ring GR O-Ring 9. 2 See Flow Control Valve, Page P GD Block 11. G6408-H06-O 6 Hex Socket Head Plug W/O-Ring, 9 16"-18 O-Ring GR O-Ring 12. G Connector W/O-Ring, ¾"-16 Male JIC To ⅞"-14 O-Ring GR O-Ring 13. G Plug W/O-Ring, ⅞"-14 O-Ring GR O-Ring 14. GD Sleeve, 1" Long 15. GD Cover 16. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" 17. G Hex Head Cap Screw, ⅜"-18 x 1 ½" G Serrated Flange Nut, ⅜" GA Terminal Strip W/Screws, No. 6, 14 Terminal GR Screw, No x ¼" 19. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel 20. G Phillips Pan Head Machine Screw, No x ¾", Stainless Steel 21. GA Terminal Strip Mount 22. G Phillips Pan Head Machine Screw, No x ½", Stainless Steel 23. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 24. G6801-L-08 1 Long Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring P93 Rev. 7/09

94 VALVE BLOCK - LOCATED ON HITCH VVB035(TWL26f) 1. GD Block 2. - See Solenoid Valve, Page P See Pressure Relief Valve, Page P97 4. G Connector W/O-Ring, 9 16"-18 Male JIC To O-Ring GR O-Ring 5. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 6. G Connector W/O-Ring, ⅞"-14 Male JIC To O-Ring GR O-Ring 7. G Swivel Elbow, 90, 9 16"-18 Male JIC To Female 8. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To O-Ring GR O-Ring 9. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 10. G6408-H06-O 2 Hex Socket Head Plug W/O-Ring, 9 16"-18 O-Ring GR O-Ring See Hose Take-Up, Pages P50 And P GD Terminal Strip Mount 13. G Phillips Flat Head Machine Screw, No x ⅝", Stainless Steel 14. GA Terminal Strip W/Screws, No. 6, 8 Terminal GR Screw, No x ¼" 15. G Phillips Pan Head Machine Screw, No x ⅝", Stainless Steel See Electrical Components, Pages P104 And P105 P94 8/08

95 VALVE BLOCK - LOCATED ON L.H. REAR CENTER FRAME (PNE39) 1. GR Manual Override 2. GA Coil 3. See Proportional Valve, Page P97 4. G6408-H08-O 1 Hex Socket Head Plug W/O-Ring, ¾"-16 O-Ring 5. G6408-H10-O Hex Socket Head Plug W/O-Ring, ⅞"-14 O-Ring 6. See Check Valve, Page P97 7. GA Hydrualic Motor 8. G Elbow W/O-Ring, 90, ⅞"-14 Male JIC To O-Ring GR O-Ring 9. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 10. GD Valve Block 11. G6408-H06-O 1 Hex Socket Head Plug W/O-Ring, 9 16"-18 O-Ring 12. G Hex Head Cap Screw, 5 16"-18 x 3 ½" G Lock Washer, 5 16" A. GA Hydraulic Motor (Items 1-12) P95 8/08

96 SOLENOID VALVE VVB019(TWL27c/TWL18/PLTR75c/A9481) 1. GR Special Hex Nut, ½" G1K274 1 Coil Kit W/Coil, Contacts, Housings And Fork Terminals GD Housing, Black GD Contact G Fork Terminal 3. GR Cartridge A. G1K275 - Solenoid Valve Kit W/Solenoid Valve, Contacts, Housings And Fork Terminals GD Housing, Black GD Contact G Fork Terminal B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring Contact Solenoid Valve Holds Load In One Direction Fork Terminal Housing FLOW CONTROL VALVE VVB020(TWL28) A. GA Flow Control Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring P96 8/08

97 PRESSURE RELIEF VALVE VVB020(TWL29) A. GA Pressure Relief Valve, 1000 PSI B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring CHECK VALVE VVB020(TWL30) A. GA Check Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring PROPORTIONAL VALVE (TWL322) A. GA Proportional Valve B. GR Seal Kit, Includes: (2) O-Rings, (1) BU Ring P97 8/08

98 HYDRAULIC HOSES AND FITTINGS ON HITCH (TWL107d/TWL107b) Tongue Cylinder A3 B3 Transport Latch Cylinder B5 A5 A4 B4 C2 A5 A3 A1 B5 C1 A2 B2 A6 B6 B3 B1 D1 D2 Valve Bock - Located On Hitch NOTE: See pages P94 for additional information. B6 A6 Tongue Lock Cylinder C1 Hose Support/Junction - Located On L.H. Side Of Center Pivot D1 B1 A4 B4 Rotation Cylinder A1 P98 8/08

99 HYDRAULIC HOSES AND FITTINGS ON HITCH 1. GD ISO Coupler 2. *A Hose Assembly, ½" x 156", 8 Row 36"/38" Y Hitch *A Hose Assembly, ½" x 191", 12 Row 30" Y Hitch *A Hose Assembly, ½" x 250", 12 Row 30" T Hitch *A Hose Assembly, ½" x 246", 12 Row 36"/38" And 16 Row 30" Y Hitch *A Hose Assembly, ½" x 300", 16 Row 30" T Hitch 3. *A Hose Assembly, ⅜" x 156", 8 Row 36"/38" Y Hitch *A Hose Assembly, ⅜" x 191", 12 Row 30" Y Hitch *A Hose Assembly, ⅜" x 240", 12 Row 30" T Hitch *A Hose Assembly, ⅜" x 246", 12 Row 36"/38" And 16 Row 30" Y Hitch *A Hose Assembly, ⅜" x 300", 16 Row 30" T Hitch 4. *A Hose Assembly, ⅜" x 48", 8 Row 36"/38" Y Hitch (If Applicable) *A Hose Assembly, ⅜" x 72", 12 Row 30" Y Hitch (If Applicable) *A Hose Assembly, ⅜" x 96", 12 Row 36"/38" Y Hitch, 12 Row 30" T Hitch And 16 Row 30" Y Hitch (If Applicable) 5. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 6. *A Hose Assembly, ¼" x 90", 8 Row 36"/38" Y Hitch *A Hose Assembly, ¼" x 110", 12 Row 30" Y Hitch *A Hose Assembly, ¼" x 157", 12 Row 30" T Hitch And 12 Row 36"/38" Y Hitch *A Hose Assembly, ¼" x 168", 16 Row 30" Y Hitch *A Hose Assembly, ¼" x 216", 16 Row 30" T Hitch 7. G Elbow W/O-Ring, 90, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 8. G Swivel Elbow, 45, 9 16"-18 Male JIC To Female 9. G Connector W/O-Ring, 9 16"-18 Male JIC To ¾"-16 O-Ring GR O-Ring 10. *A Hose Assembly, ¼" x 32", 8 Row 36"/38" Y Hitch *A Hose Assembly, ¼" x 40", 12 Row 30" Y / T Hitch, 12 Row 36"/38" Y Hitch And 16 Row 30" Y / T Hitch 11. *A Hose Assembly, ½" x 112", 8 Row 36"/38" Y Hitch *A Hose Assembly, ½" x 72", 12 Row 30" T Hitch *A Hose Assembly, ½" x 120", 12 Row 30"/36"/38" Y Hitch *A Hose Assembly, ½" x 78", 12 Row 36"/38" And 16 Row 30" T Hitch *A Hose Assembly, ½" x 128", 16 Row 30" Y Hitch 12. *A Hose Assembly, ⅜" x 116", 8 Row 36"/38" Y Hitch *A Hose Assembly, ⅜" x 79", 12 Row 30" T Hitch *A Hose Assembly, ⅜" x 125", 12 Row 30"/36"/38" Y Hitch *A Hose Assembly, ⅜" x 84", 12 Row 36"/38" And 16 Row 30" T Hitch *A Hose Assembly, ⅜" x 130", 16 Row 30" Y Hitch 13. G Bulkhead Tube Union, ⅞"-14 Male JIC 14. G Bulkhead Tube Union, ¾"-16 Male JIC 15. *A Hose Assembly, ¼" x 125", 8 Row 36"/38" Y Hitch *A Hose Assembly, ¼" x 85", 12 Row 30" T Hitch *A Hose Assembly, ¼" x 130", 12 Row 30"/36"/38" Y Hitch *A Hose Assembly, ¼" x 95", 16 Row 30" T Hitch *A Hose Assembly, ¼" x 136", 16 Row 30" Y Hitch 16. *A Hose Assembly, ⅜" x 60", 8 Row 36"/38" Y Hitch *A Hose Assembly, ⅜" x 68", 12 Row 30"/36"/38" Y Hitch *A Hose Assembly, ⅜" x 97", 16 Row 30" T Hitch *A Hose Assembly, ⅜" x 79", 12 Row 30" T Hitch *A Hose Assembly, ⅜" x 80", 16 Row 30" Y Hitch * Hydraulic hose is not stocked by KINZE Repair Parts, but can be made available on a special order basis. Call for quote. P99 8/08

100 HYDRAULIC HOSES AND FITTINGS ON PLANTER FRAME (TWL105c) 16 Row Shown (Two Wing Lift Cylinders Per Wing) 12 Row (One Wing Lift Cylinder Per Wing) Hose Support/Junction - Located On L.H. Side Of Center Pivot NOTE: See pages P98-P99 for additional information. B1 C1 A1 A5 B5 L.H. Row Marker Cylinder D1 Valve Block - Located On L.H. Rear Center Frame NOTE: See page P96 for additional information. L.H. Wing Lift Cylinder(s) SLAVE D4 L.H. Wing Lock Cylinder A7 B7 C2 Center Lift Cylinder REAR L.H. MASTER D2 D1 D3 D1 Center Lift Cylinder FRONT R.H. MASTER 1. *A Hose Assembly, ⅜" x 260", 8 Row 36"/38" *A Hose Assembly, ⅜" x 272", 12 Row 30" *A Hose Assembly, ⅜" x 318", 12 Row 36"/38" *A Hose Assembly, ⅜" x 332", 16 Row 30" 2. G Elbow W/O-Ring, 90, ¾"-16 Male JIC To O-Ring GR O-Ring 3. G Connector W/O-Ring, ¾"-16 Male JIC To 7 16"-20 O-Ring GR O-Ring 4. *A Hose Assembly, ½" x 62", 8 Row 36"/38" And 12 Row 36"/38" *A Hose Assembly, ½" x 58", 12 Row 30" And 16 Row 30" 5. *A Hose Assembly, ⅜" x 62", 8 Row 36"/38" And 12 Row 36"/38" *A Hose Assembly, ⅜" x 58", 12 Row 30" And 16 Row 30" 6. G Tee, ¾"-16 Male JIC, 16 Row 30" 7. *A Hose Assembly, ⅜" x 230", 8 Row 36"/38" *A Hose Assembly, ⅜" x 250", 12 Row 30" *A Hose Assembly, ⅜" x 284", 12 Row 36"/38" *A Hose Assembly, ⅜" x 272", 16 Row 30" 8. *A Hose Assembly, ⅜" x 66" 9. G Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 10. *A Hose Assembly, ⅜" x 42" 11. G Bulkhead Tee, ⅞"-14 Male JIC 12. G Reducer, ⅞"-14 Female JIC To ¾"-16 Male JIC 13. *A Hose Assembly, ⅜" x 30" 14. *A Hose Assembly, ⅜" x 52" 15. *A Hose Assembly, ⅜" x 40", 16 Row 30" P100 8/08

101 HYDRAULIC HOSES AND FITTINGS ON PLANTER FRAME D1 C1 B1 D1 A1 B1 Junction Block - Located On R.H. Side Of Center Pivot NOTE: See page P92 for additional information. C1 A1 B4 A4 R.H. Row Marker Cylinder R.H. Wing Lift Cylinder(s) SLAVE R.H. Wing Lock Cylinder B6 A6 D5 C3 C2 D4 C3 D5 D2 C1 D3 A5 B6 A7 B7 A4 B4 A6 B6 B1 A1 Valve Block - Located On R.H. Rear Center Frame NOTE: See page P93 for additional information. 16. *A Hose Assembly, ½" x 41" 17. *A Hose Assembly, ½" x 30" 18. *A Hose Assembly, ⅜" x 30" 19. *A Hose Assembly, ⅜" x 204", 8 Row 36"/38" *A Hose Assembly, ⅜" x 225", 12 Row 30" *A Hose Assembly, ⅜" x 280", 12 Row 36"/38" *A Hose Assembly, ⅜" x 288", 16 Row 30" 20. *A Hose Assembly, ⅜" x 30" 21. *A Hose Assembly, ⅜" x 168", 8 Row 36"/38" *A Hose Assembly, ⅜" x 186", 12 Row 30" *A Hose Assembly, ⅜" x 234", 12 Row 36"/38" *A Hose Assembly, ⅜" x 216", 16 Row 30" 22. G6400-L-08 - Long Connector W/O-Ring, ¾"-16 Male JIC To O-Ring GR O-Ring 23. *A Hose Assembly, ⅜" x 10 ½", 16 Row 30" 24. G Swivel Elbow, 90, ¾"-16 Male JIC To Female 25. G Bulkhead Tee ⅞"-14 Male JIC To ¾"-16 JIC 26. GA Hose Assembly, ⅜" x 510", 12 Row 30" (If Applicable) GA Hose Assembly, ⅜" x 570", 16 Row 30" (If Applicable) 27. GA Hose Assembly, ½" x 510", 12 Row 30" (If Applicable) GA Hose Assembly, ½" x 570", 16 Row 30" (If Applicable) 28. GD ISO Coupler (If Applicable) * Hydraulic hose is not stocked by KINZE Repair Parts, but can be made available on a special order basis. Call for quote. P101 8/08

102 VALVE BOX MODULE (A12554) P102 8/08

103 VALVE BOX MODULE 1. GD Straight Union, ¼" 2. GD Strap 3. GA Valve Box Harness 4. GA Manifold 5. GA Valve 6. G Slotted Flat Head Machine Screw, No x ½", Stainless Steel 7. GD Male Connector, ¼" 8. G Slotted Flat Head Machine Screw, No x 1 ½", Stainless Steel G Hex Nut, No G Hex Head Cap Screw, ¼"-20 x ½" G Lock Nut, ¼"-20, Grade B 10. GD Nylon Tube, ¼" O.D. x 5" Long 11. GD Hex Nipple, ⅛" Pipe 12. GA Strain Relief 13. GD Valve Box Cover A. GA Valve Box Module Assembly, (Items 1-13) P103 8/08

104 ELECTRICAL COMPONENTS (TWL19a/TWL18/ELC14/ELC3a/ELC5c/MTR27a/ELC39/TWL26e/ELC8/A9481/ELC12b/MTR27t/A9689b/A10924ELC4/FF27b/FF27c/ELC38/A9201a/A9202a/TWL20g/ELC34/ELC35/ELC10c) Socket Contact (Tractor) Pin Contact (Planter) Sealing Plug Amber Amber Red See Wing Frame, pages P52 and P53 for light brackets. For Planter Harness For Tractor Harness Planter Harness Harness Extension Tractor Harness 1. GA Ground Clamp 2. GD Contact 3. GD Housing, Black GD Housing, Red 4. GA Double Light Assembly (Shown) GA Double Light Assembly GR Red Lens GR Amber Lens GR Cover GR Rubber Grommet (4) GR Lamp Unit GR Bulb 5. GA Harness Extension, 42" 6. GD Sealing Plug, No GD Socket Contact, No GD Pin Contact, No. 14 P104 Rev. 7/09

105 ELECTRICAL COMPONENTS 9. GA Wiring Harness W/7 Terminal Female Connector, 786" (2 Light Connections), 12 Row 30" GA Wiring Harness W/7 Terminal Female Connector, 882" (2 Light Connections),16 Row 30" GA Terminal Female Connector 10. GA Connector W/Cable Clamp, 23 Pin Capacity 11. GA Dust Cap W/Chain 12. GA Dust Cap W/Chain 13. GA Connector W/Cable Clamp, 23 Socket Capacity 14. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 15. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 16. GD Sealing Plug 17. GA Dust Plug (Black) 18. GA Wiring Harness W/Dust Cap, 500", 8 Row 36"/38" And 12 Row 30" GA Wiring Harness W/Dust Cap, 612", 12 Row 36"/38" And 16 Row 30" 19. GA Harness Extension W/Dust Caps, 180" 20. GA Indicator Light 21. GA Fuse Holder W/Spade, " 22. GD Fuse, 15 Amp, Type AGC 23. GD Fuse, MDL 10 Amp Delay Action 24. GR Hex Face Nut, 15 32"-32 GR Internal Tooth Lock Washer, 15 32" 25. GA Cover Plate (Shown) GA Cover Plate, Planters Equipped With Two-Speed Point Row Clutch 26. GR Hex Socket Button Head Cap Screw, No x ½" 27. GD O-Ring (If Applicable) 28. GA Switch, 3 Position Toggle, On-Off-On 29. GA Switch, 3 Position Toggle, Momentary On-Off-Momentary On 30. GA Switch, 2 Position Toggle, On-Off 31. GA Switch, Push Button W/Transformer 32. GD Mounting Bracket 33. G Washer, ¼" SAE 34. GA Knob 35. GR Cage Nut, ¼" G1K267 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (3) Male Terminal Pins 37. G1K268 - Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable Clamp, (1) Lock Ring, (3) Female Terminal Pins 38. GA Power Lead Adapter 39. GA Wiring Harness W/Dust Cap And Power Cable 40. G7633X - Backlit Control Console Assembly W/Mounting Brackets, Short Harness W/Dust Cap And Power Cable G7639X - Backlit Control Console Assembly W/Mounting Brackets, Short Harness W/Dust Cap And Power Cable, Planters Equipped With Two-Speed Point Row Clutches 41. GD Insulated Clamp, ⅜" GD Insulated Clamp, 11 16" 42. GD Jumper, 7 16" 43. GA Jumper Wire W/Fork Terminal, 13" G Fork Terminal 44. GA Wiring Harness W/7 Terminal Female Connector, 714" (4 Light Connections), 8 Row 36"/38" GA Wiring Harness W/7 Terminal Female Connector, 870" (4 Light Connections), 12 Row 36"/38" GA Terminal Female Connector 45. GA Single Amber Light Assembly GR Amber Lens GR Rubber Grommet (2) GR Lamp Unit GR Bulb 46. G1K321-2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female Housings, (6) Pin Contacts, (6) Seals 47. G1K320-2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, (6) Socket Contacts, (6) Seals 48. GA Work Light Assembly 49. GD Bracket, 4 ¼" x 4" 50. G T-Bolt Clamp, 3 ½", Stainless Steel 51. GA Wiring Harness, 348" NOTE: See Point Row Clutch or Two-Speed Point Row Clutch for R.H. and L.H. Wiring Harness for the point row clutches. P105 Rev. 7/09

106 KPM III ELECTRONIC SEED MONITOR (MTR59) Shaft Rotation Sensor Radar Distance Sensor Magnetic Distance Sensor (MDS) Shaft Rotation Sensor Power Lead Adapter Blue Radar Y-Cable Adapter Harness Planter Harness Extension Harness Blue Acre Counter Switch Kit Magnetic Distance Sensor (MDS) Adapter 1. GA Radar Distance Sensor W/20' Cable 2. GA Radar Sensor Pipe/Mounting Bracket Package 3. G1K323-4-Pin Connector Kit W/Female Housing, Includes: (4) Pins, (1) Cable Clamp 4. GA Magnetic Distance Sensor 5. GD Magnetic Distance Sensor Pulse Wheel 6. GD Insulated Clamp, ⅜" 7. GD Bracket 8. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Spring Wave Washer P106 Rev. 7/09

107 KPM III ELECTRONIC SEED MONITOR 10. GD Mount 11. GA Power Lead Adapter 12. GA Monitor/Radar Adapter Cable, 10" 13. G1K267 - Console Cable Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (3) Male Terminal Pins 14. G1K268 - Console Cable Connector Kit, Includes: (1) Cable Clamp, (1) 3-Pin Connector, (1) Lock Ring, (3) Female Terminal Pins 15. GA KPM III Backlit Console W/Brush (Item 22), Dust Plug (Item 33), Mounting Bracket Assembly, Console Mounting Bracket Hardware And Power Harness GA Mounting Bracket Assembly, Includes: (2) Mounting Brackets, (2) Connector Halves, (1) Compression Spring, (1) Tension Knob, (1) ¼"-20 x 1 ¾" Hex Head Cap Screw, (1) ¼" Plastic Washer, (1) ¼" Steel Washer GR Console Mounting Bracket Hardware Package, Includes: (3) No x ⅝" Hex Socket Pan Head Screws, (3) No. 10 Lock Washers GR Power Harness 16. G1K322-4-Pin Connector Kit W/Male Housing, Includes: (4) Female Socket Contacts And (1) Cable Clamp See Tractor/Planter Wiring Harness, Items 18 And 39 On Pages P104 And P GA Planter Harness W/Dust Caps, 6 Row (9 Connectors) GA Planter Harness W/Dust Caps, 8 Row (12 Connectors) GA Planter Harness W/Dust Caps, 12 Row (16 Connectors) GA Planter Harness W/Dust Caps, 16 Row (20 Connectors) GD Dust Cap 19. GA Seed Tube W/Computerized Sensor GR Sensor Only GA Seed Tube (With Holes For Sensor Installation) 20. GA Magnetic Distance Sensor Adapter (Analog To Digital) 21. GD Shaft Sensor Mount 22. GR Brush 23. GR Radar Y-Cable (Used To Connect Radar Distance Sensor For Multiple Functions) 24. GA Adapter Harness, 1' 25. GA Extension Harness W/Dust Cap, 15' GA Extension Harness W/Dust Cap, 30' GD Dust Cap 26. G1K364 - Rotation Sensor Mount Kit, Includes: (2) Mounts, (2) GD " x 7" U-Bolts, (4) G10228 Lock Washers, (4) G10102 Hex Nuts, (1) Instruction 27. G1K321-2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female Housings, (6) Pin Contacts, (6) Seals 28. G1K320-2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, (6) Socket Contacts, (6) Seals 29. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals G1K362-3-Pin Female Connector Kit (Blue), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 30. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals G1K363-3-Pin Male Connector Kit (Blue), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 31. GD Sealing Plug 32. G1K249 - Acre Counter Switch Kit 33. GA Dust Plug (Black) GA Dust Plug (Blue) 34. GA Dust Plug (Black) GA Dust Plug (Blue) 35. GR Rotation Sensor 36. GD Mount 37. G Pan Head Screw, No x 1 ¼" G Washer, No. 10 SAE G Hex Nut, No GD Cover 39. GD Spring 40. GD Spring Mount 41. GR Actuator 42. G Pan Head Machine Screw, No x 1 ¼", Stainless Steel G Lock Washer, No. 8, Internal/External, Stainless Steel G Hex Nut, No. 8-32, Stainless Steel 43. G Hex Head Cap Screw, ⅜"-16 x 8" G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. GA Magnetic Distance Sensor And Mounting Package (Items 4-9) P107 Rev. 7/09

108 KINZE VISION DISPLAY (IP1046) CABLES AIR LINES B A C B A C Air Valves Sections Section 1 Section 2 Section 3 Section P108 Rev. 7/09

109 KINZE VISION DISPLAY 1. GA Vision Loaner (Display Only) 2. GA Switch Box Module 3. GR Switch Box Bracket 4. GA Mounting Bracket Assembly GD Ram Base GD Ram Vesa Base 5. GA Power Supply 6. GR Flash Card 7. GR SMS CD 8. GA Display Cable 9. GA Power Cable 10. GA Seed Rate Power Cable 11. GD Y-Splice Connector 12. GD Terminator 13. GA Radar Adapter Cable 14. GA Power Control Relay 15. GA Implement Cable, 16 Row GA Implement Cable, 12 Row 16. GA Planter Monitor Module 17. GA Planter Monitor Module Cable 18. GA Seed Rate Control Module 19. GA Can Extension Cable, 4" (Hydraulic Drive) 20. GA Can Stub Cable, 6" (Hydraulic Drive) 21. GA Clutch Control Module 22. GA Can Extension Cable, 5'' 23. GA Can Stub Cable, 8'' 24. GA Seed Command Cable 25. GA Implement Switch Extension Cable 26. GA13593 See Shank Assembly, Seed Tube and Depth Adjustment, Pages P4 and P5 27. GA Hall Effect Sensor 28. GA Seed Rate Cable 29. See Valve Block - Located On R.H. Rear Center Frame (Mechanical) Page P114, Or Valve Block Located On R.H. Rear Center Frame (EdgeVac ), Page GA Encoder Module 31. See Clutch Valve Assembly, Page P See Pnuematic Down Pressure and Pull Row Unit Air Clutch, Pages P6 and P7 33. GR Dust Plug 34. GR Dust Plug 35. GA GPS Antenna 36. GA GPS Cable 37. GA Null Modem Cable A. G8266x - Vision Display Package (Items 1-5) P109 Rev. 7/09

110 PLANTER MONITOR MODULE (PMM) (MTR60/MTR63/PMM01/MTR65/MTR61/MTR64/MTR62/PMM03) Shaft Rotation Sensor Magnetic Distance Sensor (MDS) Planter Harness Blue Magnetic Distance Sensor (MDS) Adapter 1. G Hex Head Cap Screw, ⅜"-16 x 8" G Serrated Flange Nut, ⅜" GD Shaft Sensor Mount 3. GR Rotation Sensor 4. GR Actuator 5. GD Mount P110 Rev. 7/09

111 PLANTER MONITOR MODULE (PMM) 6. G Pan Head Screw, No x 1 ½" G Washer, No. 10 SAE G Hex Nut, No GD Cover 8. G Pan Head Machine Screw, No x 1 ¼", Stainless Steel G Lock Washer, No. 8, Internal/External, Stainless Steel G Hex Nut, No. 8-32, Stainless Steel 9. GA Magnetic Distance Sensor 10. GD Magnetic Distance Sensor Pulse Wheel 11. GD Insulated Clamp, ⅜" 12. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Washer, ⅜" G Hex Nut, ⅜" GD Bracket 14. GD Spring Wave Washer 15. GA Dust Plug (Black) GA Dust Plug (Blue) 16. GA Dust Plug (Black) GA Dust Plug (Blue) 17. G1K248-3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female Housings,, (9) Pin Contacts, (9) Seals G1K362-3-Pin Female Connector Kit (Blue), Includes: (3) 3-Pin Female Housings, (9) Pin Contacts, (9) Seals 18. G1K252-3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals G1K363-3-Pin Male Connector Kit (Blue), Includes: (3) 3-Pin Male Housings, (9) Socket Contacts, (9) Seals 19. GD Sealing Plug 20. GA Module Cover Assembly W/Lock Clamps GD Module Cover GA Lock Clamp G Phillips Pan Head Machine Screw, No x ⅝", Stainless Steel G Serrated Flange Nut 21. GD Bracket 22. GA Planter Monitor Module 23. G Hex Head Cap Screw, 5 16"-18 x ¾" G Lock Washer, 5 16" G Hex Nut, 5 16" GA Magnetic Distance Sensor Adapter (Analog To Digital) 25. GA Planter Monitor Module Cable 26. GD Support G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Washer, 5 16" G Hex Nut, 5 16" GR Brush 28. GA Planter Harness W/Dust Caps, 6 Row (9 Connectors) GA Planter Harness W/Dust Caps, 8 Row (12 Connectors) GA Planter Harness W/Dust Caps, 12 Row (20 Connectors) GA Planter Harness W/Dust Caps, 16 Row (22 Connectors) GD Dust Cap 29. GA Seed Tube W/Computerized Sensor GR Sensor Only GA Seed Tube (With Holes For Sensor Installation) A. GA Magnetic Distance Sensor And Mounting Package (Items 9-14) P111 Rev. 7/09

112 KINZE COBALT DISPLAY (CO1a/VI18/VI21/A12553/GR1838/GR1839/A12852/A12853) P112 Rev. 7/09

113 KINZE COBALT DISPLAY 1. *GA Cobalt Display 2. GA Power Supply 3. GA Seed Rate Module 4. GR Flash Card 5. GR SMS CD 6. GA Display Cable 7. GA Power Cable 8. GA Power Control Relay 9. GA Seed Rate Power Cable 10. GA Radar Adapter Cable 11. GA Switch Box Module 12. GR Dust Plug 13. GR Dust Plug 14. GA Mounting Bracket Assembly GD Ram Base GD Ram Vesa Base 15. GA Clutch Control Module 16. GA Implement Cable (12 Row) GA Implement Cable (16 Row) 17. GA Seed Command Cable 18. GA Can Stub Cable, 8'' 19. GA Can Extension Cablet, 5'' 20. GA Implement Switch Extension Cable 21. GA Encoder Module 22. GR Switch Box Bracket See Planter Monitor Module (PMM), Pages P110 And P See Planter Monitor Module (PMM), Pages P110 And P GA Hall Effect Sensor 27. GA See Shank Assembly, Seed Tube And Depth Adjustment, Pages P2 And P3 28. See Center Frame, Pages P52 And P See Pneumatic Down Pressure Package Option, Pages P4 And P5 And Interplant Push Row Unit, Air Clutch Package, Pages P40 And P GD Y-Splice Connector 31. GD Terminator 32. GA Seed Rate Cable *See alternate view for mounting bracket. P113 Rev. 7/09

114 INTERPLANT PUSH ROW UNIT DRIVE (RU134/TWL516) 8 Row 36"/38" 12 Row 30"/36"/38" If Applicable (Viewed From Front Of Machine) (Per Side) 1. G Machine Bushing, 1", 10 Gauge (As Required) 2. GD Lock Clamp 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 4. GA Hanger Bearing, ⅞" Hex Bore 5. GD Hex Shaft, ⅞" x 55" (No Holes), R.H. Side, 8 Row 36"/38" GD Hex Shaft, ⅞" x 84" (No Holes), L.H. Side, 8 Row 36"/38" GD Hex Shaft, ⅞" x 48" (No Holes), R.H. Side, 12 Row 30" And 16 Row 30" GD Hex Shaft, ⅞" x 66" (No Holes), L.H. Side, 12 Row 30" And 16 Row 30" GD Hex Shaft, ⅞" x 55" (No Holes), R.H. Side, 12 Row 36"/38" GD Hex Shaft, ⅞" x 84" (No Holes), L.H. Side, 12 Row 36"/38" 6. GD Hex Shaft, ⅞" x 49" (No Holes), Both Sides, 8 Row 36"/38" GD Hex Shaft, ⅞" x 90" (No Holes), Both Sides, 12 Row 30" GD Hex Shaft, ⅞" x 108" (No Holes), Both Sides, 12 Row 36"/38" GD Hex Shaft, ⅞" x 124" (No Holes), R.H. Side, 16 Row 30" GD Hex Shaft, ⅞" x 138" (No Holes), L.H. Side, 16 Row 30" 7. GD Hex Shaft, ⅞" x 24" (No Holes), 12 Row 30" W/Even-Row Push Row Unit GD Hex Shaft, ⅞" x 33" (No Holes), 16 Row 30" W/Even-Row Push Row Unit 8. GA U-Joint W/Grease Fitting, Female, 18 ⅛" Long, 8 Row 36"/38" And 12 Row 36"/38" GA U-Joint W/Grease Fitting, Female, 10 ¼" Long, 12 Row 30" And 16 Row 30" GR Grease Fitting, 45, Metric GR Inboard Yoke And Outer Profile (10 ¼" U-Joint) GR Inboard Yoke And Outer Profile (18 ⅛" U-Joint) GR Cross And Bearing Kit GR Yoke, ⅞" Hex P114 Rev. 7/09

115 INTERPLANT PUSH ROW UNIT DRIVE (Per Side) 9. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" G External Inverted Snap Ring, 1 ½" 11. G Spring Pin, 5 32" x 7 16" 12. GR Lock Collar 13. GR Spring 14. GR Drive Shaft 15. GR Shim 16. GR Bushing 17. GR Sprocket, 19 Tooth 18. G Hex Socket Set Screw, ⅜"-16 x ¾" 19. GR Pin 20. GR Knurled Collar 21. GR Compression Spring 22. GD U-Bolt, 7" x 5" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Plate, R.H Side (Shown) GD Plate 24. G Chain, No. 40, 226 Pitch Including Connector Link GR Connector Link, No GD Brace 26. GA Sprocket W/Bearing, 18 Tooth 27. G Hex Head Cap Screw, ½"-13 x 2" G Washer, ½" SAE G Lock Washer, ½" G Hex Nut, ½" G Hex Head Cap Screw, ½"-13 x 2" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GA Sprocket, 19 Tooth 30. GD Support Angle, R.H. 31. GD Support Angle, L.H. 32. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Coupler, 4" 34. GA U-Joint W/Grease Fitting, Male, 12 ¼" Long GR Grease Fitting, 45, Metric GR Inner Profile GR Inboard Yoke GR Spring Pin, 8mm x 50mm GR Cross And Bearing Kit GR Yoke, ⅞" Hex 35. G Hex Head Cap Screw, ⅝"-18 x 2 ¼" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" G Square Head Set Screw, ⅜"-16 x ⅝" A. GA Clutch Sprocket Assembly, 19 Tooth (Items 10-21) B. G1K269 - Lock Clamp Kit (Items 2 And 3) C. G1K331 - Clutch Sprocket Kit (Items 11, 16 And 17) P115 Rev. 7/09

116 DOUBLE DISC FERTILIZER OPENER AND MOUNT FOC007(PT25e/TWL34a/FRTZ208) To Pump To Opener Optional - Liquid Fertilizer Only P116 Rev. 7/09

117 DOUBLE DISC FERTILIZER OPENER AND MOUNT (Per Assy.) 1. GA Bracket 2. G Grease Fitting, ¼"-28, Taper Threads 3. G Cotter Pin, ⅛" x 1" 4. GD Lockup Pin 5. GD Hex Head Adjusting Bolt, ⅝"-18 x 3 ¼" G Hex Jam Nut, ⅝"-18, Grade 2 6. GA Spring 7. GD Bushing, 41 64" I.D. x 3 ½" Long 8. G Machine Bushing, ⅝" (.030" Thick) 9. G Rivet, ¼" x " 10. GD Dust Cap 11. G Hex Jam Nut, ⅝"-11, Grade 2 G Hex Jam Nut, ⅝"-11, L.H. Threads, Grade G Special Machine Bushing, ⅝" x 1" O.D. 13. GB Hub 14. GA Bearing 15. GD Disc Blade, 3.5 mm x 15" 16. GD Inner Scraper 17. GA Mount 18. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Washer, 5 16" 19. GA Drop Tube, Dry Fertilizer 20. GD Extension 21. G Hose Clamp, No GA Drop Tube, Liquid Fertilizer 23. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Washer, 5 16" SAE G Lock Nut, 5 16"-18, Grade GA Shank 25. GA Scraper Mount 26. GD Scraper 27. G Carriage Bolt, ⅜"-16 x 1" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" G Hex Head Cap Screw, ½"-13 x 4 ½" G Lock Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 5" G Lock Nut, ⅝" GD U-Bolt, 2 ½" x 2 ½" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GA Mount (One Per Opener) W/U-Bolts GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Check Valve, Low Rate A. GA Disc Blade And Bearing Assembly (Items 9 And 13-15) P117 Rev. 7/09

118 HD SINGLE DISC FERTILIZER OPENER (Soil Press Wheel) (TWL35d/TWL35b) P118 Rev. 7/09

119 HD SINGLE DISC FERTILIZER OPENER (Soil Press Wheel) (Per Assy.) 1. GD J-Bolt, ½"-13 G Lock Washer, ½" G Hex Nut, ½" See HD Single Disc Fertilizer Opener (Blade And Drop Tube), Pages P120 And P GD Lockup Bar 4. G Hex Head Cap Screw, ⅝"-11 x 3" 5. G Flanged Whiz Lock Screw, 5 16"-18 x ⅝", No Serration G Serrated Flange Nut, 5 16" GD Half Wheel Cover, Nylon 7. GA Bearing 8. GD Offset Tire 9. GD Half Wheel 10. G Hex Head Cap Screw, ½"-13 x ¾" G Lock Washer, ½" G Washer, ½" USS 11. G Lock Washer, ⅝" 12. G Machine Bushing, 1" (.048" Thick) 13. G Clevis Pin, ½" x 1 ¾" G Cotter Pin, ⅛" x ¾" 14. GD Yoke 15. G Washer, ⅝" SAE See HD Single Disc Fertilizer Opener (Blade And Drop Tube), Pages P120 And P GD Pivot Pin 18. G Spring Pin, ⅜" x 2" 19. GA Wheel Arm W/Grease Fitting, R.H. GA Wheel Arm W/Grease Fitting, L.H. (Shown) G Grease Fitting, ¼" GD Spring 21. GB Spring Washer 22. GD Special Bolt A. G1K215 - Lockup Kit (Items 1 And 3) B. GA Gauge Wheel Complete (Items 5-9) P119 Rev. 7/09

120 HD SINGLE DISC FERTILIZER OPENER (Blade And Drop Tube) FOC016/FOC007/FOC019(PT27c/FRTZ208) To Pump To Opener Optional - Liquid Fertilizer Only (Per Assy.) 1. GD Disc Blade, 18" GD Disc Blade, 20" (Optional) 2. GB Spindle 3. GA Seal 4. GA Bearing 5. GA Arm W/Cups And Washers GD Inner Cup GR Outer Cup G Washer, ⅝" SAE 6. G Hex Head Cap Screw, ⅝"-11 x 1 ½" 7. G Hex Head Cap Screw, ⅜"-16 x 1" G Lock Nut, ⅜" GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 9. GD Channel 10. GD Spring 11. G Grease Fitting, ⅛" NPT 12. G Hex Nut, ¾" GD Tap Block 14. GB Spring Seat 15. GA Bearing 16. G Machine Bushing, ", 10 Gauge 17. G Slotted Nut, 1" GD Dust Cap P120 Rev. 7/09

121 HD SINGLE DISC FERTILIZER OPENER (Blade And Drop Tube) (Per Assy.) 19. GD Pin G Lock Washer, 7 16" G Hex Nut, 7 16" GD Compression Spring 21. G Hair Pin Clip, No G Bolt, ½"-13 x 1 ½" G Lock Nut, ½" G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Washer, ⅜" USS G Lock Nut, ⅜" G Carriage Bolt, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" GD Scraper 26. GB Drop Tube, R.H., Dry Fertilizer GB Drop Tube, L.H., Dry Fertilizer (Shown) 27. GA Drop Tube, L.H., Liquid Fertilizer (Shown) GA Drop Tube, R.H., Liquid Fertilizer 28. GD Bar 29. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Washer, ⅜" 30. GD Clamp 31. GD Angle, R.H. GD Angle, L.H. (Shown) 32. G Hex Head Cap Screw, ½"-13 x 2" G Lock Nut, ½" G Machine Bushing, 1 ¼", 18 Gauge (As Required) 34. G Hex Head Cap Screw, ⅝"-11 x 3 ¼" G Washer, ⅝" SAE G Lock Washer, ⅝" 35. G Grease Fitting, ¼" GD Bushing, 2 ¼" 37. G Hex Head Cap Screw, ½"-13 x 1 ¾" G Lock Nut, ½" G Cotter Pin, 3 16" x 1 ½" 39. GA Opener Mount, R.H. GA Opener Mount, L.H. (Shown) 40. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Special Bolt 42. GB Rod Guide 43. GD Storage Strap 44. GD Sleeve, ½" x ½" Long 45. G Washer, ½" USS 46. GA Check Valve, Low Rate P121 Rev. 7/09

122 NOTCHED SINGLE DISC FERTILIZER OPENER (FRTZ208/B0405/TWL34e/TWL34g/FRTZ268/A12108) To Pump To Opener Optional - Liquid Fertilizer Only Liquid Fertilizer Dry Fertilizer P122 Rev. 7/09

123 NOTCHED SINGLE DISC FERTILIZER OPENER (Per Assy.) 1. G Hex Head Cap Screw, ½"-13 x 1 ½" G Hex Nut, ½" GB Mount, L.H. (Shown) GB Mount, R.H. 3. GB Arm, 13 ½" 4. G Grease Fitting, ¼" GD Bushing, ¾" O.D. x ½" Long 6. GA Compression Spring Assembly 7. G Hex Head Cap Screw, ⅜"-16 x 1 ¾" G Washer, ⅜" USS G Lock Nut, ⅜" GD Sleeve, " Long 9. GA Pivot Arm, L.H. GA Pivot Arm, R.H. (Shown) 10. GD Scraper, L.H. GD Scraper, R.H. (Shown) 11. G Hex Head Cap Screw, ⅜"-16 x ¾" 12. G Carriage Bolt, ⅜"-16 x 2" G Lock Nut, ⅜" G Hex Head Cap Screw, 5 16"-18 x ⅞" G Lock Washer, 5 16" G Washer, 5 16" USS 14. GD Stepped Spacer, 3" Long 15. GA Hub W/Bearing GA Bearing, Double Row 16. G Hex Head Cap Screw, ⅝"-11 x 5 ½" GD Washer, 1 ½" O.D., 7 Gauge, Hardened G Lock Nut, ⅝" G Hex Head Cap Screw, ⅝"-11 x 5" G Washer, ⅝" USS G Machine Bushing, 1 ½", 18 Gauge (As Required) G Lock Nut, ⅝" GD Disc Blade, Notched, 16 ¾" 19. G Hex Head Cap Screw, ½"-13 x 6" G Washer, ½" SAE G Lock Nut, ½" GD U-Bolt, 1 ½" x 2 ½" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GB Knife, L.H. GB Knife, R.H. (Shown) 22. GA Drop Tube, Liquid Fertilizer GA Drop Tube, Liquid Fertilizer (Shown) 23. GA Drop Tube, L.H., Dry Fertilizer GA Drop Tube, R.H., Dry Fertilizer (Shown) 24. GA Check Valve, Low Rate 25. GA Mount W/U-Bolts, Liquid Fertilizer GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Mount W/U-Bolts, L.H., Dry Fertilizer GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Mount W/U-Bolts, R.H., Dry Fertilizer GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝"-11 P123 Rev. 7/09

124 RESIDUE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER DFC024(FRTZ165l) P124 Rev. 7/09

125 RESIDUE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER (Per Assy.) 1. - See Notched Single Disc Fertilizer Opener, Pages P122 And P GD Bushing, 1 ⅓" Long 3. GD Adjustment Lever 4. G Spring Pin, ¼" x 1 ¼" 5. G Hex Head Cap Screw, ½"-13 x 7" G Lock Nut, ½" G Hex Head Cap Screw, ⅝"-11 x 7 ½" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GD Sleeve, 2 ⅛" Long 8. GD Spring 9. G Carriage Bolt, ⅜"-16 x 2" G Washer, ⅜" SAE G Lock Nut, ⅜" GA Mount W/Grease Fitting, L.H. (Shown) GA Mount W/Grease Fitting, R.H. G Grease Fitting, ¼" G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Lock Nut, 5 16"-18, Grade GD Dust Cap 13. GD Wheel, 12 Tine, ⅜" x 12" 14. GA Hub W/Bearings GA Bearing 15. GD Backing Plate 16. GD Spacer, 11 16" I.D. x ½" Long 17. GD Spacer 18. G Carriage Bolt, ⅝"-11 x 3" G Hex Jam Nut, ⅝"-11, Grade GD Spring, L.H. (Shown) GD Spring, R.H. A. GA Wheel Assembly, 12 Tine, L.H. (Items 11 And 13-15)(Shown) GA Wheel Assembly, 12 Tine, R.H. (Items 11 And 13-15) P125 Rev. 7/09

126 DEPTH/GAUGE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER (FRTZ256) Three Depth Adjustment Holes P126 Rev. 7/09

127 DEPTH/GAUGE WHEEL ATTACHMENT FOR NOTCHED SINGLE DISC FERTILIZER OPENER (Per Assy.) 1. G Hex Head Cap Screw, ⅝"-11 x 3" 2. GD Special Washer, ⅝", Hardened 3. - See Notched Single Disc Fertilizer Opener, Pages P122 And P GA Blade Mount 5. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 6. GA Wheel Mount, L.H. (Shown) GA Wheel Mount, R.H. 7. GD Spacer 8. GD Half Wheel 9. GD Offset Tire 10. GA Bearing 11. GD Half Wheel Cover, Nylon 12. G Flanged Whiz Lock Screw, 5 16"-18 x ¾", No Serration G Serrated Flange Nut, 5 16" G Special Machine Bushing, ⅝" x 1" O.D. (As Required) A. GA Gauge Wheel Complete (Items 8-12) P127 Rev. 7/09

128 DRY FERTILIZER DRIVE (TWL37h) (Per Side) 1. G Chain, No. 40, 88 Pitch Including Connector Link GR Connector Link, No GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" 3. GD Shear Coupler 4. G Cotter Pin, 3 16" x 2" 5. GD Shaft, ⅞" x 7 ½" 6. GA Sprocket, 15 Tooth GA Sprocket, 19 Tooth GA Sprocket, 30 Tooth GA Sprocket, 33 Tooth GA Sprocket, 35 Tooth 7. G Spring Pin, ¼" x 1 ½" 8. GA Special Bearing, ⅞" Hex Bore x 1.6" 9. G Hex Head Cap Screw, ½"-13 x 1 ¼" G Lock Nut, ½"-13 P128 Rev. 7/09

129 DRY FERTILIZER DRIVE (Per Side) 10. GA Sprocket Storage Rod 11. GD Lynch Pin, ¼" 12. GD Shaft, ⅞" x " 13. GD Spring 14 G Grease Fitting, ¼" See Dry Fertilizer Couplers/Shafts, Pages P132 And P GA Bearing, ⅞" Hex Bore, Cylindrical 17. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 18. GD Sleeve, ⅝" I.D. x ⅞" O.D. x 3 ¼" Long 19. GD Sleeve, 1 ¼" O.D. x ⅝" Long 20. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" SAE G Lock Washer, ½" G Hex Nut, ½" G Chain, No. 40, 130 Pitch Including Connector Link GR Connector Link, No GA Sprocket, 24 Tooth 23. G Carriage Bolt, ½"-13 x 4 ½" G Washer, ½" SAE G Lock Nut, ½" GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" G Hex Head Cap Screw, ⅜"-16 x 2 ½" G Lock Nut, ⅜" GD U-Bolt, 7" x 5" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Mount, L.H. (Shown) GA Mount, R.H. 27. GA Transmission Plate, L.H. (Shown) GA Transmission Plate, R.H. 28. GD Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) (Shown) GD Torsion Spring, R.H. (Used On L.H. Wrap Spring Wrench) 29. GD Handle 30. G Hex Socket Button Head Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS 31. G External Inverted Snap Ring, ⅞" 32. G External Inverted Snap Ring, 1 ½" 33. GD Tightener Shaft, 4 ⅞" 34. G Vinyl Cap 35. GD Sleeve, 1 ¼" 36. GD Release Collar, R.H. (Shown) GD Release Collar, L.H. A. G1K378 1 Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 28-36) (Shown) G1K379 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 28-36) P129 Rev. 7/09

130 DRY FERTILIZER HOPPER AND MOUNTS DFC009/DFC018(TWL36) P130 Rev. 7/09

131 DRY FERTILIZER HOPPER AND MOUNTS (Per Hopper) 1. GA Lid W/Retainers, Clips, Rivets, Rubber Straps And Hardware GD Front Clip GD Rear Retainer G Rivet, 3 16" x 13 32" GD Rubber Strap G Hex Head Cap Screw, 5 16"-18 x 1 ¼" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" GB Auger, R.H. 3. GB Auger, L.H. 4. G Hex Head Cap Screw, 5 16"-18 x 1 ½" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" GD Shaft 6. G Hex Head Cap Screw, ¼"-20 x 2", Stainless Steel G Hex Nut, ¼"-20, Stainless Steel 7. GD Strap 8. G Hair Pin Clip, No GD Baffle 10. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" G Hex Head Cap Screw, 5 16"-18 x 1 ¼" G Special Washer, ⅜" x 1 ½" O.D. GD Rubber Washer G Lock Washer, 5 16" G Hex Nut, 5 16" G Grease Fitting, ⅛" NPT 13. GD Hopper 14. GD Outlet Housing 15. G Carriage Bolt, 5 16"-18 x 1" G Hex Head Cap Screw, 5 16"-18 x 1 ¼" (If Applicable) G Washer, 5 16" USS (If Applicable) G Special Washer, ⅜" x 1 ½" O.D. GD Rubber Washer G Lock Washer, 5 16" G Hex Nut, 5 16" G Cotter Pin, ¼" x 2" 17. GB Bearing 18. G Hose Clamp, No. 36, Stainless Steel 19. G Hose Clamp, No GD Rubber Tube 21. GD U-Bolt, 7" x 5" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" G Hex Head Cap Screw, ½"-13 x 1 ½" G Lock Washer, ½" G Hex Nut, ½" GD Angle, L.H. 24. GA Mount, L.H. 25. GD Angle, R.H. 26. GA Mount, R.H. 27. GD Holder, Rubber Tube (As Required) A. GA Hopper Sub-Assembly (Items 8, 10 And 12-15) B. GA Hopper Hardware Box (Items 2-7, 9, 11, 16 And 17) P131 Rev. 7/09

132 DRY FERTILIZER COUPLERS/SHAFTS RH100594(TWL38a) 8 Row 36" 8 Row 38" 12 Row 30" 12 Row 36" 12 Row 38" 16 Row 30" L.H. Side Of Machine Shown Direction Of Travel P132 Rev. 7/09

133 DRY FERTILIZER COUPLERS/SHAFTS 1. - See Dry Fertilizer Drive, Pages P128 And P GD Coupler, 6" 3. G Cotter Pin, ¼" x 2" 4. GA U-Joint W/Grease Fitting, Male, 12 ¼" Long GR Yoke, ⅞" Hex GR Cross And Bearing Kit GR Inboard Yoke GR Inner Profile GR Grease Fitting, 45, Metric GR Spring Pin, 8mm x 50mm 5. GA U-Joint W/Grease Fitting, Female, " Long GR Yoke, ⅞" Hex GR Cross And Bearing Kit GR Inboard Yoke And Outer Profile GR Grease Fitting, 45, Metric 6. G Machine Bushing, 1 ½" x 1 32", 10 Gauge 7. GD Coupler, 3" 8. GD Hex Shaft, ⅞" x 15 ½" (1 Hole) 9. G Spring Pin, ¼" x 1 ½" 10. GD Coupler, 1 ¾" 11. GA U-Joint W/Grease Fitting, Female, 10 ¼" Long GR Yoke, ⅞" Hex GR Cross And Bearing Kit GR Inboard Yoke And Outer Profile GR Grease Fitting, 45, Metric 12. GD Coupler, 4" 13. GD Hex Shaft, ⅞" x 24 ½" (1 Hole) 14. GD Hex Shaft, ⅞" x 13 ½" (1 Hole) 15. GD Coupler, 10 ¾" 16. G Square Head Set Screw, ⅜"-16 x ⅝" P133 Rev. 7/09

134 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES LFC021/LFC023/LFC030/LFC012(FRTZ201g) 8" Lid 1 ¼" At Bottom Of Tank ¾" At Bottom And Top Of Tank Polypropylene Fitting Assemblies See Items 5 And G Elbow, 90, ¾" NPT To Barb 2. GD Band, 30" (4 Per Tank) 3. G Hose Clamp, No G Hose, ¾" x 72" (One Per Tank) 5. GA Tank W/Lid And Fittings, 30" x 150 Gallon, 8 Row Sizes (Qty. 2), 12/16 Row Sizes (Qty. 4) GR Lid W/Vent, 8" (Top Of Tank) GR ¾" Polypropylene Fitting Assembly (Overflow Fitting, Nut, Bushing And O-Ring) (Top And Bottom Of Tank) GR Overflow Fitting GR ¼" Polypropylene Fitting Assembly (Nut, Bushing And O-Ring) (Bottom Of Tank) P134 Rev. 7/09

135 LIQUID FERTILIZER TANKS, SADDLES, SADDLE MOUNTS AND HOSES 6. GD Pad, 8" x 14' (For Two 30" Tanks) 7. GA Tank Mount (2 Per Tank) 8. GD Mounting Angle (2 Per Tank) 9. G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" G Hex Head Cap Screw, ¾"-10 x 8" G Washer, ¾" USS G Lock Washer, ¾" G Hex Nut, ¾" G Adapter, 1 ¼" NPT To Barb 12. GD J-Bolt, 5 16"-18 (8 Per Tank) G Lock Nut W/Nylon Insert, 5 16"-18, Grade 8 (8 Per Tank) 13. G Hose Clamp, No GA Shutoff Valve, 1 ¼" NPT GR Body O-Ring GR Stem O-Ring GR Teflon Seat GR Ball GR Handle 15. G Elbow, 90, 1 ¼" Male NPT To Female 16. G Close Nipple, 1 ¼" NPT 17. G Pipe Plug, ¾" NPT 18. G Tee, 1 ¼" Barb 19. G Hose, 1 ¼" x 32', 8 Row 36"/38" And 12 Row 30" G Hose, 1 ¼" x 40', 12 Row 36"/38" And 16 Row 30" 20. G Tee, 2" Female NPT 21. G Reducing Bushing, 2" Male NPT To 1 ¼" Female 22. GD Dust Plug, 2" Male Cam Lock 23. GD Adapter, 2" Female NPT To Cam Lock 24. GD Dust Cap, 2" Cam Lock 25. G Elbow, 45, 2" Male NPT To Female 26. GD Adapter, 2" Male NPT To Cam Lock 27. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Shutoff Valve, 2" NPT 29. G Elbow, 90, 2" NPT To Barb 30. G Hose Clamp, No. 36, Stainless Steel 31. G Hose, 2" x 12', 8 Row G Hose, 2" x 18', 12/16 Row 32. GA Quick Fill Mount, 2" 33. G Close Nipple, 2" NPT P135 Rev. 7/09

136 LIQUID FERTILIZER PISTON PUMP MOUNT AND GROUND DRIVE WHEEL (TWL219rr) 48 Tooth Drive Sprocket And 18 Tooth Driven Sprocket 18 Tooth Sprocket 48 Tooth Sprocket 1. G Hex Head Cap Screw, ⅝"-11 x 7 ½" G Lock Washer, ⅝" G Hex Nut, ⅝" GA Wheel Arm Mount 3. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 4. G Hex Head Cap Screw, 5 / 8 "-11 x 1 ¾" GD Special Washer, ⅝", Hardened G Lock Nut, ⅝" GA Spring Mount 6. GD Pin, 1 ¼" x 13 ½" G Cotter Pin, ¼" x 2" 7. GA Arm W/Grease Fittings G Grease Fitting, ⅛" NPT 8. GA Wheel, 5" x 15" 9. GD Valve Stem P136 Rev. 7/09

137 LIQUID FERTILIZER PISTON PUMP MOUNT AND GROUND DRIVE WHEEL 10. G Hex Head Cap Screw, ⅝"-11 x 6 ½" GD Special Washer, ⅝", Hardened 11. GA Spring Mount 12. GB Washer 13. GD Compression Spring 14. GA Spring Guide 15. G Hex Head Cap Screw, ⅝"-11 x 12" G Lock Nut, ⅝" G Hex Head Cap Screw, ¾"-10 x 2" G Lock Washer, ¾" 17. G Hex Head Cap Screw, ¾"-10 x 1 ¾" G Lock Washer, ¾" G Hex Nut, ¾" GD Hose Holder 19. GR Sprocket, 18 Tooth 20. G Hex Head Cap Screw, ⅜"-16 x 1 ½" GR Mounting Pad G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 GR Offset Link, No See Liquid Fertilizer Piston Pump, Pages P140 And P G Hex Head Cap Screw, ⅝"-11 x 1 ½" G Washer, ⅝" USS G Lock Washer, ⅝" G Hex Nut, ⅝" GA Pump Mount 24. G Hex Head Cap Screw, ½"-13 x 1 ½" G Washer, ½" USS G Lock Washer, ½" G Hex Nut, ½" GD Scraper 26. G Hex Head Cap Screw, ⅝"-11 x 3 ½" G Washer, ⅝" SAE G Lock Washer, ⅝" G Hex Nut, ⅝" GA Idler Sprocket W/Bearing, 15 Tooth 28. GD Spacer, 11 16" I.D. x 1 ¼" Long 29. GD Tire, 7.60" x 15", 8 Ply (Specify Brand*) 30. GA Spindle 31. GA Seal 32. GA Bearing 33. GR Lug Nut, ½" G Sprocket, 48 Tooth 35. G Hex Head Cap Screw, 5 16"-18 x 1" G Lock Washer, 5 16" 36. GD Shoulder Nut, 1 ¼"-12 UNF-2A 37. GA Hub W/Cups And Studs, 5 Bolt GR Cup GR Stud 38. G Chain, No. 2050, 63 Pitch Including Connector And Offset Link, Used With NGP-7075 Piston Pump GR Connector Link, No GR0200 `- Offset Link, No GD Lynch Pin, ¼" * Specific brand requests will be supplied only as available from current KINZE Repair Parts stock. If a specific brand requested is not in stock, the brand available will be supplied. Different brand tires may have different diameters. Change in tire brand may affect rates. Field checks are recommended after any change in tires. P137 Rev. 7/09

138 LIQUID FERTILIZER FLOW DIVIDER MOUNT AND HOSES (FRTZ280/FRTZ298) P138 Rev. 7/09

139 LIQUID FERTILIZER FLOW DIVIDER MOUNT AND HOSES 1. G Hose, ⅜" x 160', 12 Row G Hose, ⅜" x 120', 16 Row 2. G Hose Clamp, No GD Adapter, ¼" NPT To ⅜" Barb 4. - See Liquid Fertilizer Piston Pump Flow Divider, Pages P142 And P G Pipe Plug, ¼" NPT 6. G Reducing Bushing, 1" Male NPT To ¾" Female, Stainless Steel (If Applicable) 7. GA Mount, ¾" NPT 8. GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GA Strainer Complete GR Screen, No. 40 Mesh GR Gasket GR Y-Body GR End Cap 10. G Hose Clamp, No G Adapter, 1 ¼" NPT To Barb See Liquid Fertilizer Tanks, Saddles, Saddle Mounts And Hoses, Pages P134 And P G Hose Clamp, No G Coupler, ¾" Female NPT 15. G Hose, ¾" x 200" 16. G Adapter, ¾" NPT To Barb 17. G Elbow, 90, ¾" NPT To Barb See Liquid Fertilizer Piston Pump, Pages P140 And P G Reducing Bushing, 1 ½" Male NPT To 1 ¼" Female 20. G Close Nipple, 1 ¼" NPT 21. G Elbow, 90, 1 ¼" Male NPT To Female P139 Rev. 7/09

140 LIQUID FERTILIZER PISTON PUMP Uses 18 Tooth Sprocket (A12335a/GR1808) Model NGP-7055 P140 Rev. 7/09

141 LIQUID FERTILIZER PISTON PUMP Uses 18 Tooth Sprocket 1. GR Flange Cover Assembly G Hex Head Cap Screw, 5 16"-18 x ⅞" 2. GR Connecting Rod Assembly 3. GR Spacer Assembly G Hex Socket Head Set Screw, 5 16"-18 x ⅜" 4. GR Plug 5. GR Vent Plug 6. GR Woodruff Key 7. GR Eccentric Pin 8. GR Pin 9. GR Bearing 10. GR Setting Hub Assembly 11. GR Stuffing Box Insert 12. GR Sprocket, 18 Tooth 13. GR Adjustment Wrench 14. GR Setting Pointer Assembly 15. GR Repair Kit, Includes: (6) Gaskets, (9) O-Rings, (4) Washers, (1) Retaining Ring, (2) Oil Seals, (1) Snap Ring, (1) Thrust Washer, (1) Rod Bushing, (2) Flange Plunger Packings, (2) Packing Springs, (2) Rod Vee Packing Sets 16. GR Discharge Valve Assembly 17. GR Suction Valve Assembly 18. GR Setting Arm Key 19. GR Bearing 20. G Carriage Bolt, ⅜"-16 x 2" G Lock Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ½" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜"-16 A. GA Piston Pump Complete W/18 Tooth Sprocket (Model NGP-7055) P141 Rev. 7/09

142 LIQUID FERTILIZER PISTON PUMP FLOW DIVIDER (FRTZ159/PT40a/FRTZ202c) Model FD-1200 Flow Divider, 12 Outlet Model FD-2000 Flow Divider, 20 Outlet ¾" NPT 1" NPT P142 Rev. 7/09

143 LIQUID FERTILIZER PISTON PUMP FLOW DIVIDER 1. GR Vent Plug 2. GR Hex Socket Head Screw, ¼"-20 x ¾", Stainless Steel GR Lock Washer, ¼", Stainless Steel 3. GR Cap 4. GR Needle Assembly W/Seal Kit (Item 22) 5. GR Seal Kit, Includes: (3) O-Rings, (1) Seal, (1) Spring, (1) Stainless Steel Sleeve 6. GR Sleeve 7. GR Body, 12 Outlets 8. G Hex Socket Head Plug, ¼" NPT, Stainless Steel 9. GR Cap 10. GR Needle Assembly W/Seal Kit (Item 22) 11. GR Seal Kit, Includes: (3) O-Rings, (1) Seal, (1) Spring 12. GR Sleeve 13. GR Body, 20 Outlets 14. GR Sleeve, 1" O.D. x ½" Long, Stainless Steel A. GA Liquid Fertilizer Piston Pump Flow Divider Complete, 12 Outlet (Model FD-1200) (Items 1-7) (8/12 Row Planters) B. GA Liquid Fertilizer Piston Pump Flow Divider Complete, 20 Outlet (Model FD-2000) (Items 1, 2 And 8-14) (16 Row Planters) P143 Rev. 7/09

144 LIQUID FERTILIZER SQUEEZE PUMP DRIVE (TWL46f) (Per Side) 1. GA Idler W/Bolt-On Sprockets GD Sprocket, 12 Tooth GD Sleeve, " Long G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Head Cap Screw, ⅜"-16 x 1 ¾" 2. GD Lock Clamp 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Flange Nut, 5 16"-18, No Serration 4. G Machine Bushing, 1 ½" x 1 32", 10 Gauge (As Required) 5. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Lock Washer, 5 16" G Hex Nut, 5 16" G Clevis Pin, 5 16" x 1" G Retaining Ring, 5 16" 7. GD Spring P144 Rev. 7/09

145 LIQUID FERTILIZER SQUEEZE PUMP DRIVE (Per Side) 8. GA Sprocket, 15 Tooth GA Sprocket, 19 Tooth GA Sprocket, 32 Tooth GA Sprocket, 34 Tooth GA Sprocket, 46 Tooth GA Sprocket, 62 Tooth (Optional) 9. GD Hex Shaft, ⅞" x 48" (1 Hole), 8 Row GD Hex Shaft, ⅞" x 54" (1 Hole), 12/16 Row 10. G Hex Head Cap Screw, 5 16"-18 x 2" G Lock Washer, 5 16" G Hex Nut, 5 16" G Cotter Pin, 3 16" x 2" 12. GD Lynch Pin, ¼" 13. GA Sprocket Storage Rod 14. GD Shear Coupler See Liquid Fertilizer Squeeze Pump, Pages P146-P GA Pump Mount, L.H. 17. GA Pump Mount, R.H. 18. G Bearing, ⅞" Hex Bore, Spherical 19. G Flangette 20. GA Drive Plate W/Grease Fitting GA Drive Plate W/Grease Fitting (Shown) G Grease Fitting, ¼" GD U-Bolt, 7" x 5" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD U-Bolt, 5" x 7" x ⅝"-11 G Lock Washer, ⅝" G Hex Nut, ⅝" GD Coupler 24. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Washer, ⅜" USS G Lock Washer, ⅜" G Hex Nut, ⅜" G Chain, No. 40, 170 Pitch Including Connector Link GR Connector Link, No See Seed Rate Transmission And Row Unit Drill Shafts, Pages P68 And P GD Sleeve, 1 ¼" 28. GD Release Collar, L.H. (Shown) GD Release Collar, R.H. 29. GD Torsion Spring, R.H. (Used On L.H. Wrap Spring Wrench) (Shown) GD Torsion Spring, L.H. (Used On R.H. Wrap Spring Wrench) 30. GD Handle 31. G Hex Socket Button Head Cap Screw, ¼"-20 x ½", Grade 8 G Lock Washer, ¼" G Washer, ¼" USS 32. GD Sleeve, 1 ¼" O.D. x ⅝" Long 33. G External Inverted Snap Ring, ⅞" 34. G External Inverted Snap Ring, 1 ½" 35. GD Tightener Shaft, 4 ⅞" 36. G Vinyl Cap A. G1K269 - Lock Clamp Kit (Items 2 And 3) B. G1K379 - Wrap Spring Wrench Replacement Kit, Silver Collar, L.H. (Items 27-36) (Shown) G1K378 1 Wrap Spring Wrench Replacement Kit, Gold Collar, R.H. (Items 27-36) P145 Rev. 7/09

146 LIQUID FERTILIZER SQUEEZE PUMP, 8 ROW SIZE LFC011(PT46a) 1. GR Spring Anchor Bar 2. GR Spring 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Washer, 5 16" USS G Wing Nut, 5 16" GR Plate 5. GR Nylon Bushing 6. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Wing Nut, 5 16" GR Metering Hose, ½" x 13" 8. G Hose Clamp, No G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Hex Nut, ⅜" GR Angle 11. GR Manifold Plug 12. GR Adapter 13. GR Intake Manifold 14. GR Discharge Manifold Less Hose Barbs 15. G Hose, ⅜" x 120' 16. GR Rubber Cap 17. GR Nylon Washer 18. G Square Head Set Screw, 5 16"-18 x ¾" 19. G Grease Fitting, ¼" GR Roller Arm 21. GR Roller 22. G Spring Pin, 5 16" x 1 ⅛" 23. GD Sleeve 24. GD Shaft 25. GR Shim, 3 64" 26. GR Shim, 1 32" 27. GR Frame 28. GR Nylon Hose Barb, ½" x ⅜" (If Applicable) A. GA Squeeze Pump Complete, 4 Rows (Items 1-14, And 24-28) P146 Rev. 7/09

147 LIQUID FERTILIZER SQUEEZE PUMP, 12 ROW SIZES LFC011/LFC011(PT47a) 1. GR Spring Anchor Bar 2. GR Spring 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Washer, 5 16" USS G Wing Nut, 5 16" GR Plate 5. GR Nylon Bushing 6. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Wing Nut, 5 16" GR Metering Hose, ½" x 13" 8. G Hose Clamp, No G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Hex Nut, ⅜" GR Angle 11. GR Manifold Plug 12. GR Adapter 13. GR Intake Manifold 14. GR Discharge Manifold Less Hose Barbs 15. G Hose, ⅜" x 160', 12 Row 30" G Hose, ⅜" x 120', 12 Row 36"/38" 16. GR Rubber Cap 17. GR Nylon Washer 18. GR Bushing 19. G Square Head Set Screw, 5 16"-18 x ¾" 20. G Grease Fitting, ¼" GR Roller Arm 22. GR Roller 23. G Spring Pin, 5 16" x 1 ⅛" 24. GD Sleeve 25. GD Shaft 26. GR Shim, 3 64" 27. GR Shim, 1 32" 28. GR Frame 29. GR Nylon Hose Barb, ½" x ⅜" (If Applicable) A. GA Squeeze Pump Complete, 6 Rows (Items 1-13, And 25-29) P147 Rev. 7/09

148 LIQUID FERTILIZER SQUEEZE PUMP, 16 ROW SIZE LFC010(PT48a) P148 Rev. 7/09

149 LIQUID FERTILIZER SQUEEZE PUMP, 16 ROW SIZE 1. GR Spring Anchor Bar 2. GR Spring 3. G Square Head Machine Bolt, 5 16"-18 x 1 ¾" G Washer, 5 16" USS G Wing Nut, 5 16" GR Plate 5. GR Nylon Bushing 6. G Carriage Bolt, 5 16"-18 x 1" G Washer, 5 16" USS G Wing Nut, 5 16" GR Metering Hose, ½" x 13" 8. G Hose Clamp, No GR Adapter 10. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Hex Nut, ⅜" GR Angle, L.H. GR Angle, R.H 12. GR Manifold Plug 13. GR Intake Manifold 14. GR Discharge Manifold Less Hose Barbs 15. G Hose, ⅜" x 120' 16. GR Rubber Cap 17. GR Nylon Washer 18. GR Bushing 19. G Square Head Set Screw, 5 16"-18 x ¾" 20. G Grease Fitting, ¼" GR Roller Arm 22. GR Roller 23. GR Set Collar 24. GR Back Up Roller 25. G Spring Pin, 5 16" x 1 ⅛" 26. GD Sleeve 27. GD Shaft 28. GR Shim, 3 64" 29. GR Shim, 1 32" 30. GR Frame 31. GR Nylon Hose Barb, ½" x ⅜" (If Applicable) A. GA Squeeze Pump Complete, 8 Rows (Items 1-14, And 27-31) P149 Rev. 7/09

150 REAR TRAILER HITCH PHA032/LFC003(TWL47a) P150 Rev. 7/09

151 REAR TRAILER HITCH 1. GA Hitch 2. G Hex Head Cap Screw, ⅝"-11 x 1 ½" GD Special Washer, ⅝", Hardened G Lock Washer, ⅝" 3. G Washer, 1 ¼" SAE 4. GD Pin, 1 ¼" x 12 ¾" G Cotter Pin, ¼" x 2" 5. GA Hitch 6. GB Bushing, 21 32" I.D. x ⅞" O.D. x 19 32" Long 7. GD Tap Block 8. GB Spring Seat 9. GD Spring 10. GB Rod Guide 11. GD Special Bolt G Hex Nut, ¾" G Hex Head Cap Screw, 1"-8 x 2 ½" G Lock Nut, 1" GD U-Bolt, 2" x 2" x ½"-13 G Lock Washer, ½" G Hex Nut, ½" GD Hanger Tube 15. GD Spring 16. G Twin Loop Chain, 15 Links 17. GA Hose Support 18. G Hex Head Cap Screw, ¼"-20 x 1" G Washer, ¼" USS G Lock Nut, ¼"-20, Grade B 19. GA Hose Support 20. G Hex Head Cap Screw, ⅜"-16 x 1 ¼" G Lock Nut, ⅜" G Hose, 1 ¼" x 22' 22. G Hose Clamp, No G Adapter, 1 ¼" NPT To Barb 24. GA Shutoff Valve, 1 ¼" NPT GR Body O-Ring GR Stem O-Ring GR Teflon Seat GR Ball GR Handle 25. GD Adapter, 1 ¼" Male NPT To Cam Lock 26. GD Dust Cap, 1 ¼" Cam Lock 27. GD Adapter, 1 ¼" Barb To Female Cam Lock 28. GD Dust Plug, 1 ¼" Male Cam Lock 29. G Hex Head Cap Screw, ⅜"-16 x 5" G Lock Washer, ⅜" G Hex Nut, ⅜" G Hex Head Cap Screw, ⅜"-16 x 6" G Lock Washer, ⅜" G Hex Nut, ⅜"-16 P151 Rev. 7/09

152 DECALS, PAINT AND MISCELLANEOUS Connect directly to DO NOT REMOVE THIS ASSEMBLY AFTER PLANTER IS ASSEMBLED FOR USE. REMOVAL OF THIS WHEEL AND AXLE ASSEMBLY CAN CAUSE THE MACHINE TO BECOME UNSTABLE AND TIP OVER CAUSING DAMAGE OR SERIOUS INJURY P152 Rev. 7/09

153 DECALS, PAINT AND MISCELLANEOUS A A 9 DRAIN MOISTURE FROM AIR TANK DAILY. DRAIN TANK COMPLETELY FOR STORAGE. R EQUIPPED P153 Rev. 7/09