PRODUCT NAME ORDER # PAGE # ANTENNAS
|
|
|
- Bennett Hall
- 5 years ago
- Views:
Transcription
1
2 PRODUCT NAME ORDER # PAGE # ANTENNAS Yagi Antenna UBR-Y9000 w/ lead Mhz Yagi Antenna UBR-Y4000 w/ lead & MHz Dual Band Omni Antenna & Yagi Multiband Antenna SURGE PROTECTOR Coaxial Surge Protector CSP-BNFNF Gas Tube Replacement Fuse GT TOWERS (HARDWARE IS INCLUDED WITH ALL TOWERS) Tower Exposure Overview 6 5G Tower Top w/.5 " Diameter Steeple G 0 Top Section for 45 Series Tower Tower Mid Section 5G-MS 0899 Tower Mid Section 45G-MS Tower Base Section 45G-BS 049 BASE PLATES Tower Base Plate- Hinged 835 Tower Base Plat- Tilt 0058 Tower Base Plate- Fixed COAX 40-SFX Jumper Coax SFX Transmission Line Coax HPX Transmission Line Coax 0090 TNC-Male Coax Connector UBR-40-SFX 0098 SMA-Male Coax Connector UBR-40-SFX N-Female Coax Connector UBR-400-SFX 000 -Custom coax is availabe in any length & termination --Ask us about our bulk order discounts 9
3 ELECTRICAL SPECIFICATIONS Frequency Range: MHz Impedance: 50 ohms Gain: 0 ± 0.5 dbi Maximum Input Power: 00 W Polarization: VERT/HORZ Front to Back Ratio: 0 db Horizontal Half Power Beam Width: 56 Vertical Half Power Beam Width: 46 VSWR: >.5 MECHANICAL SPECIFICATIONS Length: 609 mm Rated Wind Velocity: 60 m/s (30 mph) Connector: N-Female Radiator Composition: Aluminum Antenna Color: Black Lightning Protection: DC Ground
4 ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS Frequency Range: MHz Dimensions: Length: 4 Width:.8 Impedance: 50 ohms Rated Wind Velocity: 60 m/s (50 mph) VSWR: <.5 Gain: 0 dbi Maximum Input Power: 00 W Polarization: VERT/HORZ Lightning Protection: DC Ground Operating Temperature: -40 F +58 F Connector: N-Female Radiator Composition: Aluminum Antenna Color: Black
5 Features: Integral N-female type connector Operational Frequencies: MHz or MHz 4.6/6.3 dbi, bracket included SPECIFICATIONS Frequency Range MHz MHz Gain 4.6 dbi 6.3 dbi Front to Back Ratio VSWR < >5 db Horizontal Beam Width H 360 Vertical Beam Width E 3 E Operating Temperature -40 C +70 C Input Impedance 50 ohms Maximum Power 50 W Connector Type/Termination N-Female Wind Velocity 56 m/s Polarization Vertical Lightning Protection DC Open STRUCTURE Length 0.5 in./ 360 mm Depth 57 mm Weight.66 lbs (0.3 kg) Diameter.09 in./ 5 mm CONSTRUCTION Antenna Cap: Glass Steel Cap Color: White Heavy Duty Bracket U-Bolt Included
6 SPECIFICATIONS Frequency Range (MHz) (MHz) Gain 9 dbi Front to Back Ratio >0 db VSWR <.5 (3dB)Half Power Beam Width 90 H plane 60 E plane F/B >5 db Input Impedance 50 ohms Maximum Power >50 W Connector Type N-Female Wind Velocity 4 MPH Polarization Vertical Lightning Protection DC Ground Ambient Temperature Installation Mast Tower STRUCTURE Length Width Depth Weight Hold Pole Diameter.8 in./ 300 mm 8.46 in./ 5 mm.4 in./ 57 mm 650(g),.43 lbs 45±3mm (.77in. ±3mm) CONSTRUCTION Heavy duty stainless steel construction Steel mounting bracket 360 weld elements to boom Black polyester powder coat finish Radome Material: ABS Radome Color: Black
7 SPECIFICATIONS VALUE Bulkhead Mounting Nominal DC Spark Over Voltage 90 Volts ± 0% Maximum Peak Power 500 Watts Impedance 50 ohms Discharge Capacity: (ka, 8/0µS wave) 0/0 Frequency Range 0~3000 Mhz Discharge Voltage 90 V Insertion Loss < 0.5 db Return Losses > 0 db > 0 db VSWR <.5@DC-3000MHz Nom. Discharge Current 8/0 µs - 0 x 5 ka Residual Voltage kv/ µs <600 Min. Insulation Resistance > 0 MΩ Operation Temperature -40 to +76 F (-40 to +80 C) Waterproof IP 67 A drop-in replacement for other major brands- field proven for excellent performance
8 Exposure B Tower 5 Tower 45 Height of Tower Maximum Sq. Ft of Load at Top (CaAa) Flat Plate Area (sq. ft.) Weight of Top Load (lbs) w/no ice Number of / coax on top Foundation plan dimension (ft.) Foundation Thickness (ft.) Total Concrete (cubic yards) Size of Anchor Bolts req d per leg (in.) Number of Anchor Bolts req d per leg Exposure C Tower 5 Tower 45 Height of Tower Maximum Sq. Ft of Load at Top (CaAa) Flat Plate Area (sq. ft.) Weight of Top Load (lbs) w/no ice Number of / coax on top Foundation plan dimension (ft.) Foundation Thickness (ft.) Total Concrete (cubic yards) Size of Anchor Bolts req d per leg (in.) / / / 5/8 5/8 Number of Anchor Bolts req d per leg
9 SPECIFICATIONS MATERIAL /4 Rnd x 6GA HRP&O /4 Steel tubing with 5/6 Z-Bar Side rails: -/4 heavy duty steel tubing Rod bracing: continuous solid steel 5/6 solid serpentine zig zag Outer diameter tube cap: -/4-4 gauge Number of bays: 5 bracing and swaged Equilateral face: -/ Cap: 8 above apex side rails Walls: 6 gauge Interchangeable.5 triangular design Double bolted: bolts at each connection 9.5" Long "U" Brkt GA HRP&O Size Finish See below-sizing by model ASTM A 3 Hot- Dip Galvanized " Rnd X 6GA HRP&O Weight 35 lbs. TOWER TOP SECTION MODELS 4 " 6GA HRP&O Uberluft Tower Top Section 5G-TS Length: Uberluft Tower Top Section 5G Series Length: 0 x 8 Mast with -/4 bushing 0' Uberluft Tower Top Section 45G-TS Length: 0 TOWER HARDWARE KIT (INCLUDED) Uberluft Tower Top Section Hardware Kit Includes hex bolts, lock washers, and nuts. 5 6 " RND
10 SPECIFICATIONS MATERIAL /4 Rnd x 6GA HRP&O /4 Steel tubing with 5/6 Z-Bar Side rails: -/4 heavy duty steel tubing Rod bracing: continuous solid steel 5/6 solid serpentine zig zag Outer diameter tube cap: -/4-4 gauge Number of bays: 5 bracing and swaged Equilateral face: -/ Cap: 8 above apex side rails Walls: 6 gauge Interchangeable.5 triangular design Double bolted: bolts at each connection Size See below-sizing by model Finish ASTM A 3 Hot- Dip Galvanized Weight 35 lbs. (for Mid-Section) TOWER MID & BASE-SECTION MODELS Uberluft Tower Mid Section 5G-MS Length: Uberluft Tower Mid Section 45G-MS Length: Uberluft Tower Base Section 45G-BS Length: 5 TOWER HARDWARE KIT (INCLUDED) Uberluft Mid-Section Hardware Kit Includes hex bolts, lock washers, and nuts. 0' 5 6 "Ø HR View Scale : View 4" X 6GA 5 6 " Rnd Scale :
11 4 3 REVISIONS REV. DESCRIPTION DATE APPROVED B B *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE TOP VIEW TYP A ISO VIEW EXPLODED FRONT VIEW REVISIONS REV. DESCRIPTION DATE APPROVED REVISIONS.30 REV. DESCRIPTION DATE APPROVED BASE ASSEMBLY A B DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF B *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN *ALIGN HOLES IN SWEDGE TUBES TO CENTER HOLE IN BASE PLATE AS SHOWN TOP VIEW CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE CENTER SWEDGE TUBES ON OVER HOLES IN BASE PLATE TOP VIEW TYP. TYP. FRONT VIEW FRONT VIEW A A BASE ASSEMBLY BASE ASSEMBLY 3 3 DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF DO NOT SCALE DRAWING SCALE: :4 WEIGHT: 3.49 LBS SHEET OF
12 CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Stranded bare copper mm Dielectric Foam polyethylene mm Outer Conductor Multi-ply aluminum tape mm Overall Braid Tinned copper (90% coverage) mm Jacket UV resistant thermoplastic elastomer mm ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.4 Time Delay ns/ft (ns/m). (3.97) Impedance ohms 50 Capacitance pf/ft (pf/m) 4. (79.4) Inductance uh/ft (uh/m).060 (.0) Shielding Effectiveness db >9 ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 / /+85 Storage Temp. Range -94 / /+85 Operating Temp. Range -40 / /+85 MECHANICAL SPECIFICATIONS Performance Property Inches Metric Bend Radius: Installation mm Bend Radius: Repeated mm Bending Moment mm Performance Property lb/ft kg/m Weight Tensile Strength Flat Plate Crush Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 5000 Peak Power kw 5.6 DC Resistance Inner Conductor ohms/000ft(km) 4.8 (4.) Outer Conductor ohms/000ft(km) 3.89 (.8) Stranded BC PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) db/00ft db/00m
13 CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Stranded bare copper mm Dielectric Foam polyethylene mm Outer Conductor Multi-ply aluminum tape mm Overall Braid Tinned copper (90% coverage) mm Jacket UV resistant thermoplastic elastomer mm ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.38 Time Delay ns/ft (ns/m).0 (3.9) Impedance ohms 50 Capacitance pf/ft (pf/m) 3.9 (78.40) Inductance uh/ft (uh/m).060 (.) Shielding Effectiveness db 9 Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 8000 Peak Power kw 6 DC Resistance Inner Conductor ohms/000ft(km).07 (3.5) Outer Conductor ohms/000ft(km).65 (5.4) ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 / /+85 Storage Temp. Range -94 / /+85 Operating Temp. Range -40 / /+85 MECHANICAL SPECIFICATIONS Performance Property Value Bend Radius: Installation mm Bend Radius: Repeated mm Bending Moment lb/ft (Nm) Performance Property lb/ft kg/m Weight Tensile Strength Flat Plate Crush Stranded BC PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) db/00ft db/00m
14 CONSTRUCTION SPECIFICATIONS Description Material Inches Metric Inner Conductor Solid copper clad aluminum mm Dielectric Foam polyethylene mm Outer Conductor AL Multi-ply aluminum tape mm ENVIRONMENTAL SPECIFICATIONS Performance Property F C Installation Temp. Range -40 / /+85 Storage Temp. Range -94 / /+85 Operating Temp. Range -40 / /+85 Overall Braid Tinned copper (90% coverage) mm Jacket UV resistant thermoplastic elastomer mm MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Performance Property Units Value Velocity of Propogation % 86 Dieletric Constant na.38 Time Delay ns/ft (ns/m).0 Impedance ohms 50 Capacitance pf/ft (pf/m) 3.9 Inductance uh/ft (uh/m).060 Shielding Effectiveness db >90 Voltage Withstand Volts DC 500 Jacket Spark Volts RMS 8000 Peak Power kw 6 DC Resistance Inner Conductor ohms/000ft(km).39 Outer Conductor ohms/000ft(km).65 Performance Property Value Bend Radius: Installation mm Bend Radius: Repeated mm Bending Moment lb/ft (Nm) Performance Property lb/ft kg/m Weight Tensile Strength Flat Plate Crush Solid CCA PE Foam Dielectric Multi-ply AL Tape UV Resistant Black TPE Tinned Copper Shield (90% Coverage) FREQUENCY BAND (MHZ) db/00ft db/00m
15
16
LMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
HexPort Multi-Band Antenna
DATA SHEET Four foot (1.2 m), six port antenna with a 65 azimuth beamwidth covering 698-894 MHz and 1710-2360 MHz Four high band and two low band ports including the WCS band in a single antenna Sharp
2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
Frequency Range Dual Polarization HPBW Adjust. Electr. DT 1695 2690 2 10 set by hand or by optional RCU (Remote Control Unit) Y1 X 35 2-Port Antenna 1695 2690 35 19.5dBi 2 10 T Type No. 80010678 Highband
OctoPort Multi-Band Antenna
DATA SHEET Six foot (1.8 m), eight port antenna with an 45 azimuth beamwidth covering 698-787 MHz, 824-896 MHz and 1695-2180 MHz Four high band and four low band ports in a single antenna Sharp elevation
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
75 OHM COAXIAL CABLE (RG6)
RG6 CABLE (RG6) Drop Cable RG6 UL listed as type CMG for indoor cables. RG-6. 18 AWG copper covered steel with nominal diameter of 0.040 inch (1.02mm). Gas injected foam polyolefin insulation. Nominal
N Male Connector Clamp/Solder Attachment for PE-C600, inch, LMR-600
N Male Connector Clamp/Solder Attachment for PE-C600, 0600 inch, LMR-600 RF Connectors Technical Data Sheet Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
V
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT R1 0 8 0 8 set by hand or by optional RCU (Remote Control Unit) X 65 R2 X 65 4-Port Antenna / 65 /65 17.5/17.5dBi 0 8 /0 8 T Type
Multi-band Bi-SectorTM Array
DATA SHEET Patented twin asymmetric beam 33 Bi-Sector array phase array over a frequency range of (698-896 MHz) and (1710-2360 MHz), optimized to match existing cloverleaf (65 ) deployments. 4 low band
Tender No. : Ref. No. : LSGS-13-CX User / Customer : Page No. : 1 of 9. Specification. For
Tender No. : Ref. No. : LSGS-13-CX0022-05 User / Customer : Page No. : 1 of 9 Tender Title : Bidder : LS Cable & System Ltd. Document Title : Specification For RG Cable
Directional Antenna MHz K SITEL Caponago Tel.02 /
47 86 MHz K 72 6 4. SITEL Caponago Tel.2 / 95.74.6.9 ly polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Type No. K 72 6 47 K 72 6 41 A Input 7-16 female N
OFFSHORE WIND FEASIBILITY STUDY APPENDICES Appendix C.2 Subsea Cable Data Sheets
OFFSHORE WIND FEASIBILITY STUDY APPENDICES 10-7 10.3.2 Appendix C.2 Subsea Cable Data Sheets Design data for TFVA 36 kv 3x1x240 mm 2 KQ Metallic Laying up Inner sheath Bedding Armor Diameter of conductor
DynaFlex series cable assemblies employ innovative designs and material technology to deliver optimized electrical and
REVISED DynaFlex_021516_final_no logos.qxp_layout 1 5/10/17 1:56 PM Page 1 See back cover to learn about R single path to optimal performance www.dynawave.com DynaFlex RF and microwave cable assemblies
BRS Quasi-Omni Antenna
DATA SHEET Sub two foot (0.5 m), two port, quasi-omni antenna with uniform horizontal beamwidths covering the BRS band from 2496-2690 MHz 360 of coverage area across all bands of operation in a single
Detailed Specifications & Technical Data
Description: 20 AWG stranded (7x28).038" tinned copper conductors, polyethylene insulation, Beldfoil (100% coverage) plus a tinned copper braid shield (55% coverage), sunlight-resistant PVC jacket. Physical
GHz Standard Performance Dual Pole Parabolic Reflector Antenna
5.25-5.85 GHz Standard Performance Dual Pole Parabolic Reflector Antenna Standard Performance Dual Pole Parabolic Reflector Antennas from Cambium Networks are well suited for deployment with any of the
Connected Home OTRX 2-way 1.2GHz Regal Tap
5-1218MHz Hum and noise tested to ANSI/SCTE 16 2001 RF and power bypass capability Compatible with existing Regal Taps Available in faceplate only replacements Overview The Technetix OTRX series of Regal
BRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
DURAREEL TRAILING REELING CABLE
Supplementary Technical Information Reeling and trailing material characteristics: A. Power core conductor Flexible strands tinned annealed copper complies with AS/NZS 1802, AS/NZS 2802, AS/NZS 1125, and
High Voltage Copper, Smooth Aluminum Shield/Sheath
High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816 APPLICATION The cables are designed for use as connection between central fices. The cables are suitable for installation
INSTRUCTION MANUAL_. Specifications. Electrical.
308 Industrial Park Road Starkville, MS 39759 USA Ph: (662) 323-9538 FAX: (662) 323-6551 DX-77A 7-Band HF Vertical 10, 12, 15, 17, 20, 30, 40-Meter INSTRUCTION MANUAL_ General Description The "DX-77-A"
High Voltage Aluminum, Smooth Aluminum Shield/Sheath
High Voltage Aluminum, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 : 18 AWG stranded bare copper conductors, Flamarrest insulation and jackets, no overall jacket, all cables are Beldfoil shielded, cable jackets are color
Product accessories. Accessories HUBER+SUHNER
Product accessories Gas discharge tube (GDT) 134 Gas discharge tubes 135 SEMPER GDT units 136 Definitions 137 Selection of a suitable gas discharge tube 137 138 Protective caps 138 Mounting wacher nut
Qty: L50 50W. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45 PM6 60.
Date: Customer: Project: Type: Qty: Avanza 450 LED Solar Order Code: AV4LS - - - - - - - - - - AV4LS Series AV4LS Avanza 450 LED Solar Optics RW Type III Distribution (Wide) RN Type III Distribution (Narrow)
A-PDF Merger DEMO : Purchase from to remove the watermark
A-PDF Merger DEMO : Purchase from www.a-pdf.com to remove the watermark Model: ZDADJ1800-16-120 VPol 1710 «1880MHz 120 16dBi Sector Panel Antenna Electrical DataFrequency Range-MHz1710 «1880 Gain-dBi16
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 : 18 AWG stranded bare copper conductors, PP insulation, PVC jackets, no overall jacket, all cables are Beldfoil shielded, cable jackets are color coded by
MODEL DB-1015A 10- and 15-Meter Duo-Band Antenna Order No
MODEL DB-1015A 10- and 15-Meter Duo-Band Antenna Order No HY-GAIN ELECTRONICS CORPORATION 8601 Northeast Highway 6 Lincoln, Nebraska 68505 Telephone 464-9151 Area Code 402 printed. copyri ght Hy-Gain Electronics
2009 ROHN PRODUCTS LLC
2009 ROHN PRODUCTS LLC G U Y E D T O W E R S S T A N D A R D 2 5 G G U Y E D T O W E R GENERAL USE The is available in the standard 0 section length and a 7 length which is UPS shippable. The uses double
FISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
Time scale: from 0.05 s to 100 h Multi-function Plug-in for use with 96 series sockets. Relay + socket. Wiring diagram (without control signal)
86 Timer modules 86 Timer modules for use in conjunction with relay & socket. 86.00T - Multi-function & multi-voltage timer module 86.30T - Bi-function & multi-voltage timer module Complies with EN 45545-2:2013
Assembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
Cheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
SPECIFICATION. Part No. : GW
SPECIFICATION Part No. : GW.71.13 Product Name : 2.4GHz/.8GHz Dipole Antenna for ISM Band and WLAN IEEE 82.11a/b/g/h Feature : dbi High Performance Antenna RP-SMA(M) Hinged Antenna RoHS Compliant SPE-11-8-12/C
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
Coupling ring, screw thread provides secure cable coupling. Shielded Cat 5e coupler maintains screening. Retaining Nut
Coupling ring, screw thread provides secure cable coupling Shroud for RJ45 provides protection against damage through mis-use and positive alignment for mating of connectors Panel gasket maintains IP68
Type MMV-WP Medium Voltage Wind Power Cable
WP Type MMVWP Medium Voltage Wind Power Cable ThreeConductor: 5kV & 5kV, % Rated 05 C Renewable Energy Cables Conductors Soft annealed flexible stranded tinned copper per IEEE 580 Table and UL 07 Insulation
Time scale: from 0.05s to 100h Multi-function Plug-in for use with 90.02, 90.03, and sockets
86 Series - Timer modules Features 86.00 86.30 Timer modules for use in conjunction with relay & socket. 86.00 - Multi-function & multi-voltage timer module 86.30 - Bi-function & multi-voltage timer module
Data sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
ASSEMBLY AND INSTALLATION INSTRUCTIONS 738XB 70 CM OSCAR BOOMER MHz COMMUNICATIONS ANTENNAS (7/94)
ASSEMBLY AND INSTALLATION INSTRUCTIONS 7XB 70 CM OSCAR BOOMER 432-4 MHz COMMUNICATIONS ANTENNAS 951451 (7/94) WARNING THIS ANTENNA IS AN ELECTRICAL CONDUCTOR. CONTACT WITH POWER LINES CAN RESULT IN DEATH,
K CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
UNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
Easier! Faster! Safer!
Gexol CIR Crush and Impact Resistant Without External Armoring Passes the same stringent crush and impact testing required by UL 2225 for Type MC-HL Index CIR Power Cables Three & Four Conductor + Ground...
FEATURES. ~ Compression resistant low loss, low density dielectric. ~ Quadraform shielding. ~ Highly reliable soldered connections
TRUE BLUE Low Loss cable assemblies The Answer: An unmatched combination of low loss, durability, and value. The Question: What does Storm s True Blue line of cable assemblies provide? For more than 30
PHASE MASTER NOW IN 4 SIZES
NOW IN 4 SIZES PHASE MASTER Phase Stable ASSEMBLIES Are you a design or test engineer looking for cable assemblies that offer an unmatched combination of phase stability, low loss, and value? Then take
Gas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
Standard hook-up wires and cables for Electronics Filotex
Standard hook-up wires and cables for Electronics Filotex . Content Guideline of wires and cables... 4 Part 1 - Standard coaxial cables... 7 KX & RG standard coaxial cables... 9 Data bus cable M17/176-00002...
RockStar HighPower. Contents. RockStar HighPower Introduction C.2 C.1
ontents Introduction.2 HighPower 250 A.4 4000 V 250 A 1 4 poles HighPower 550 A.10 4000 V 550 A 1 3 poles.1 Introduction Uncompromising power in clever and safe packaging. The modular high-current connector
GAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
Qty: R4 Type IV Distribution. B4 Two 12V 146 Ah. B5 One 12V 176 Ah. P4 150W Double. 4 XXX 4 hours PM 0 hours AM. 5 XXX 6 hours PM 0 hours AM PM4 45
Date: Customer: Project: Type: Qty: SonneLITER LED Solar Order Code: SDSLS SDSLS Series - - - - - - - - - - SDSLS SonneLITER LED Solar Optics R Type I Distribution R Type II Distribution R Type III Distribution
CABLED SINGLE CONDUCTORS
CABLED SINGLE CONDUCTORS NQ SERIES Single uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete line of
Maximizer & Optimizer Fixed Tilt Antennas Polarization: Vertical Electrical Downtilt: Fixed or Variable Horizontal beamwidth: 65, 80 or 90
: Electrical Downtilt: Fixed or Variable Horizontal beamwidth: 65, 8 or 9 Applications This well-known ranges of fixed or variable tilt antennas are vertically polarized for space diversity with an option
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Contents. DX Ignition Page 2
Contents 1.0 Intent 2.0 Specifications 3.0 Installation 4.0 Operation Precautions 5.0 Repair 6.0 Parts List 7.0 Glossary of Terms 8.0 Contact Information DX Ignition Page 2 1.0 Intent The purpose of this
DURESCA Busbar system. For indoor and outdoor applications, type DE / type DG DURESCA
DURESCA Busbar system For indoor and outdoor applications, type DE / type DG DURESCA DURESCA Busbar system Swiss quality combined with global experience PRODUCT OVERVIEW Moser Glaser General description
Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
High Power Directional Coupler
DATA SHEET High power coupler at 500 W across a wideband from 698 to 2700 MHz Low RF Insertion Loss and excellent return loss performance Outdoor unit with a wide range of coupling values from 6 to 20
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
INTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
CF270.UL.D.
Outer jacket: Pressure extruded PUR mixture Overall shield: Bending-stable braid made of tinned copper wires Core insulation: Mechanically high-quality, especially low-capacitance TPE mixture Conductor:
Kuhlman Electric Corporation Volt Instrument Transformers
Kuhlman Electric Corporation 46000 Volt Instrument Transformers 46000 Volt Table of Contents Description Model Page Wound, Dry-Type VT (High Accuracy available) U/VRU-52(H) 3-4 Wound, Oil-Filled VT (High
Corflex. Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables. Introduction Applications... 3
Corflex Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables Introduction................................. 2 Applications................................. 3 Corflex PL 300V Instrumentation
INSTRUMENTATION CABLE
APPLICATION Used in data processing and process control. Suitable for fixed installations in damp locations and open spaces. The electrostatic screen protects against outer interference fields. Design
LDC Pricelist. ( WEF 1st August 2017 ) "POLYCAB" 4 Pair Unshielded Twisted Pair (UTP) LAN (Computer) Cables. Unarmoured.
INDUSTRIAL JELLY FLOODED COAXIAL CABLES LDC Pricelist LAN (COMPUTER) CABLES "POLYCAB" Gas Injected Physical Polyethylene Foam Insulation with Laminated Aluminium Tape and Aluminium Wire Braid, Jelly Flooded
Automotive products. RADOX cables and system solutions. Edition 2018/02
Automotive products RADOX cables and system solutions Edition 2018/02 One source from start to finish Innovation to achieve the goal The HUBER+SUHNER group is a leading international manufacturer of electrical
2 pole, 10 A AC/DC supply non polarized Plug-in for use with 94 series sockets
Miniature plug-in timers 7-10 A Plug-in timer.02-2 Pole 10 A.03-3 Pole 10 A.04-4 Pole 7 A Multifunctions Seven time scales, from 0.05 s to 100 h 94 series sockets for 35 mm rail (EN 60715) mount with push-in
Data sheet chainflex CF270.UL.D
For detailed overview please see design table 1. Outer jacket: Pressure extruded PUR mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic fleece 4. Core
UL Recognised Wirewound Resistors
UL1412 recognised fusible resistor * Failsafe mains fusing at 12 / 24Vrms Inrush and surge withstanding UL94-V flameproof coating SMD leadform option available RoHS compliant * UL file number E23449. Electrical
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
CF11.LC / CF11.LC.D CF14.CAT5
TPE - e-chain - Bus cable for maximum load requirements (Class 6.6.4): shielded, oil- and biooil-resistant, PVC- and halogen-free as well as hydrolysis- and microbe-resistant. Overview Example drawing
Data sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
www. h itech controls.com (800) I (303) Click or Call for a Quotel Photo: HELUKABEL Robotic Cables C HELUKABEL
Photo: HELUKABEL Robotic Cables Robotic Cables With over 30 years of experience with cables and lines, we also have the right solutions for the demands placed on the components to be installed by the applications
- (90 - f (GHz)) db (.05 SQT(f(GHz))) db
TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
Data sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
Flame Resistance, LOI 95 >
Fluoropolymers 100 When Your Application Requires 100% Reliability. NWI fluoropolymer cables offer these outstanding performance characteristics: Resistance to flame, acids, solvents, chemicals and more
GK-600. Product Classification. Dimensions. Electrical Specifications. Environmental Specifications. General Specifications
GK-600 Standard Grounding Kit for CNT CNT-600 cable OBSOLETE This product was discontinued on: April 9, 2018 This part number is supported until: April 12, 2018 Replaced By GK-SUNV Universal Grounding
Data sheet CFBUS.PVC PVC - e-chain - Bus cable for medium load requirements (class 4.3.2): shielded, oil-resistant as well as flame-retardant.
Overview Bus system Profibus CAN-Bus / Feldbus CC-Link Part. No..001.021 &.022.035 Example drawing Bus system Part. No. Ethernet (CAT5 / CAT5e / GigE / PoE).040,.045 &.049 Ethernet (CAT6 A / PoE).050 FireWire
High Performance Thermal-Magnetic Circuit Breakers 410/520/
High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism
GENERAL ATOMICS ITER CEnTRal SolEnoId ModulE FabRICaTIon September 2018
GENERAL ATOMICS ITER Central Solenoid Module Fabrication September 2018 ITER Central Solenoid The heart of the international fusion energy device The Central Solenoid (CS) is the heart of ITER. The 5-story,
Data sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
Electronic Circuit Breaker ESS20-0..
Electronic Circuit Breaker ES-0.. Description Electronic circuit breaker type ES-0.. is designed to ensure selective disconnection of individual loads in systems which are powered by a DC 4 V switch-mode
A 1.2 kv class externally removable secondary bushing
OEM Equipment Catalog Data CA800018EN Supersedes July 2015 COOPER POWER SERIES 3010-4515 A 1.2 kv class externally removable secondary bushing General Eaton s Cooper Power series 3010-4515 A externally
Data sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
CABLED TWISTED PAIRS CONDUCTORS
CABLED TWISTED PAIRS CONDUCTORS NQP SERIES Twisted Pair uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
Data sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.