WARNINGS... 4 SHACKLES CHAIN COMPARISON HERC-ALLOY OVERHEAD LIFTING HEAVY DUTY TIEDOWNS... 52

Transcription

1 hain & ttachments

2 Table of ontents WRNINGS SHKES HIN OMPRISON HER-OY OVERHE IFTING HEVY UTY TIEOWNS RON HIN TURNUKES SPEITY HIN WIRE ROPE TTHMENTS EOW THE HOOK INEX (FU PROUT ISTING)

3 olumbus McKinnon orporation has a rich tradition of providing quality products and services to meet the needs of users in a variety of industries around the globe which continues with an expanded line of chain and attachments by M. Used by professional riggers, maintenance workers, plant engineers and safety specialists to lift, pull, and secure loads, the broad product offering allows users to select the proper product for everyday use or for those challenging, unique applications which arise during the course of a project. n integral part of a lifting system, M chain and attachments come in a wide range of configurations and capacities. Our broad product offering is one advantage M has over the competition, complemented by: thoroughly trained and knowledgeable technical sales force providing expertise on applications, regulations, training requirements, and product features and benefits. global network of authorized distributors providing inventory, technical support, service after the sale, and consultation regarding specific needs. Knowledgeable customer service representatives addressing an array of issues related to shipments, product selection, specifications, and auxiliary items. World-class, global manufacturing facilities performing product testing which exceeds the standards outlined by industry regulations. n engineering team working to improve existing products, while developing unique and innovative new products. Training programs dedicated specifically to rigging products, as well as broad-based programs to cover all aspects of lifting and positioning. The ONY manufacturer of rigging products that is also a EER in the design and manufacturing of hoists, overhead cranes, and related products. More than 130 years of experience in providing products and services that exceed the expectations of customers. Some of the most recognized names in the material handling industry including the following that are registered in the U.S. Patent and Trademark Office: ig Orange, levlok, M, radle Grab, E-Z Pro, Hammerlok, Herc-lloy, ister, Piggyack, atchlok. dditionally, ady and ixie are trademarks of olumbus McKinnon orporation. 3

4 Warning olumbus McKinnon orporation assumes no responsibility for the misuse or misapplication of any of its products. s are provided with the express understanding that the purchaser and user are thoroughly familiar with the correct application and proper use of such products in rigging.! WRNING! Improper use or care of chain can result in loss of load and/or personal injury To avoid injury: o not exceed the working load limit. lways inspect chain before use for wear, damage, and elongation, o not impact load or jerk chain. pply load slowly. Protect chain from corrosion and high temperatures. Use only alloy chain and attachments for overhead lifting. o not use twisted, knotted, or kinked chain. Select the proper grade and size chain for the application. Select attachments such as hooks to match the grade, size, and working load limit of the chain. e aware of the environment where chain and hardware are being used. Extreme temperatures and corrosive media can affect the working load limit life of chain and hardware.! WRNING! Improper use of rigging attachments can result in bodily injury or property damage To avoid injury: o not exceed the working load limit. o not tip load or use attachments in any manner for which they were not intended. o not shock or dynamic load. o not apply load to latches. atches are to retain slack slings and chain only. Select attachments to match the grade, size, and working load limit of the chain. o not use excessively worn or damaged attachments. o not use mechanical coupling links to repair alloy chains used for overhead lifting. When using master rings or master links, do not use oversize crane hooks where the link does not fit in the saddle of the hook. When using shackles, do not side load. enterline of the load must coincide with centerline of shackle. o not replace pins or bolts with other than original equipment parts. Use only forged carbon wire rope clips for critical or lifting applications. o not use malleable iron wire rope clips for critical or lifting applications. Use wire rope clips in conjunction with wire rope thimbles. When using shoulder eyebolts, always apply load in the plane of the eye. When using shoulder eyebolts, make sure shoulder is at 90 degrees to axis of hole and seated. When using hoist rings, verify full 360 degree seating and re-torque periodically. o not move unbalanced loads. When using load binders, do not use a cheater bar or handle extension. o not operate a load binder while anyone is on the load. Release lever type load binders with extreme care. Make sure everyone is clear of the load as handle may whip suddenly. For complete care, use, and inspection information, refer to the M ifting, Pulling, & inding s Manual #PM-10. 4

5 Super Strong arbon nchor Shackles Super Strong arbon hain Shackles lloy nchor Shackles lloy hain Shackles Industrial/Government Rated nchor Shackles Industrial/Government Rated hain Shackles arbon Web Shackles lloy Web Shackles Trawling Shackles ong Reach Shackles NV Shackles NV Sub ssemblies Shackles

6 SHKES arbon M Super Strong nchor Shackles Screw Pin Round Pin olt & Nut ll shackles meet or exceed Federal Specification RR-271 Working oad and traceability codes shown as permanent marking on body and pin vailable in powder coated, galvanized and self-colored finishes ll shackles have alloy quenched and tempered pins Shackles made from technically advanced microalloy material oad break tests consistently show microalloy outperforms quenched and tempered carbon material Shock load testing of assemblies at -30ºF consistently demonstrate microalloy outperforms quenched and tempered carbon material* Shackles exhibit extreme deformation before failure* Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order Special products engineering available to fit your special lifting, tie down, and pulling needs esign factor 6:1 (Round pin shackles design factor 5:1) E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R min in. Ton in. in. in. in. in. in. lb. 3/16 1/2 M645 M /4 3/4 M646 M346 M /16 1 M647 M347 M /8 1-1/2 M648 M348 M /16 2 M649 M349 M /2 3 M650 M350 M /8 4-1/2 M651 M351 M /4 6-1/2 M652 M352 M /8 8-1/2 M653 M353 M M654 M354 M /8 12 M655 M355 M /4 14 M656 M356 M /8 17 M666 M366 M /2 20 M657 M357 M /8 24 M685 M385 M /4 30 M677 M377 M M658 M358 M * Independent lab verified

7 M Super Strong hain Shackles arbon Shackles Screw Pin Round Pin olt & Nut ll shackles meet or exceed Federal Specification RR-271 Working oad and traceability codes shown as permanent marking on body and pin vailable in powder coated, galvanized and self-colored finishes ll shackles have alloy quenched and tempered pins Shackles made from technically advanced microalloy material oad break tests consistently show microalloy outperforms quenched and tempered carbon material Shock load testing of assemblies at -30ºF consistently demonstrate microalloy outperforms quenched and tempered carbon material* Shackles exhibit extreme deformation before failure* Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order Special products engineering available to fit your special lifting, tie down, and pulling needs esign factor 6:1 (Round pin shackles design factor 5:1) E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R in. Ton in. in. in. in. in. lb. 1/4 3/4 M746 M546 M /16 1 M747 M547 M /8 1-1/2 M748 M548 M /2 3 M750 M550 M /8 4-1/2 M751 M551 M /4 6-1/2 M752 M552 M /8 8-1/2 M753 M553 M M754 M554 M /8 12 M755 M555 M /4 14 M756 M556 M /8 17 M766 M566 M /2 20 M757 M557 M /8 24 M785 M585 M /4 30 M777 M577 M M758 M558 M * Independent lab verified 7

8 SHKES lloy M nchor Shackles Screw Pin Round Pin olt & Nut ll shackles meet or exceed Federal Specification RR-271 Working oad and traceability codes shown as permanent marking on body and pin vailable in powder coated, galvanized and self-colored finishes ll shackles have alloy quenched and tempered pins Shackles exhibit extreme deformation before failure* Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order Special products engineering available to fit your special lifting, tie down, and pulling needs esign factor 5:1 E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R min in. Ton in. in. in. in. in. in. lb. 3/8 2 M648 - M / M649 M349 M /2 3.3 M650 M350 M /8 5 M651 M351 M /4 7 M652 M352 M /8 9.5 M653 M353 M M654 M354 M /8 15 M655 M355 M /4 18 M656 M356 M /8 21 M666 M366 M /2 25 M657 M / M /8 29 M685 M / M /4 34 M677 M / M M658 M M / M860G M862G * Independent lab verified

9 M hain Shackles lloy Shackles Screw Pin Round Pin olt & Nut ll shackles meet or exceed Federal Specification RR-271 Working oad and traceability codes shown as permanent marking on body and pin vailable in powder coated, galvanized and self-colored finishes ll shackles have alloy quenched and tempered pins Shackles exhibit extreme deformation before failure* Special testing and certification including magnetic particle, proof load, and fatigue test available upon request at time of order Special products engineering available to fit your special lifting, tie down, and pulling needs esign factor 5:1 E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R in. Ton in. in. in. in. in. lb. 3/8 2 M748 - M /2 3.3 M750 M550 M /8 5 M751 M551 M /4 7 M752 M552 M /8 9.5 M753 M553 M M754 M554 M /8 15 M755 M555 M /4 18 M756 M556 M /8 21 M766 M566 M /2 25 M757 M / M /8 29 M785 M / M /4 34 M777 M / M M758 M M * Independent lab verified 9

10 SHKES Industrial / Government Rated M arbon nchor Shackles Screw Pin Round Pin olt & Nut These shackles meet requirements of Federal Specification RR--271 mendment 1 ll shackle pins are forged from alloy steel, heat treated and tempered to give greater strength ll shackles are marked with size (inches and millimeters) and working load limit in tons Ultimate strength equals 5 times working load limit ll bolt, nut & cotter shackles have thread protected ends Galvanized per STM 153 Standard industry tolerances apply esign factor 5:1 E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R min in. Ton in. in. in. in. in. in. lb. 3/16 1/3 M645G M345G /4 1/2 M646G M346G M846G /16 3/4 M647G M347G M847G /8 1 M648G M348G M848G /2 2 M650G M350G M850G /8 3-1/4 M651G M351G M851G /4 4-3/4 M652G M352G M852G /8 6-1/2 M653G M353G M853G /2 M654G M354G M854G /8 9-1/2 M655G M355G M855G /4 12 M656G M356G M856G /8 13-1/2 M666G M366G M866G /2 17 M657G M357G M857G /8 20 M685G M385G M885G /4 25 M677G M377G M877G M658G M358G M858G / M860G

11 Industrial / Government Rated M arbon hain Shackles Shackles Screw Pin Round Pin olt & Nut Shackles meet or exceed Federal Specification RR-271 Working oad and traceability codes shown as permanent marking on body and pin vailable in powder coated, galvanized and self-colored finishes Special products engineering available to fit your special lifting, tie down, and pulling needs esign factor 5:1 E P R W Working oad (Screw Pin) (Round Pin) (olt & Nut) P E W R in. Ton in. in. in. in. in. lb. 1/4 1/2 M746G M546G M946G /16 3/4 M747G M547G M947G /8 1 M748G M548G M948G /2 2 M750G M550G M950G /8 3-1/4 M751G M551G M951G /4 4-3/4 M752G M552G M952G /8 6-1/2 M753G M553G M953G /2 M754G M554G M954G /8 9-1/2 M755G M555G M955G /4 12 M756G M556G M956G /8 13-1/2 M766G M566G M966G /2 17 M757G M557G M957G /8 20 M785G M585G M985G /4 25 M777G M577G M977G M758G M558G M958G

12 SHKES Web Shackles arbon Web Sling Shackle Finish: hot dip galvanized inch pin (zinc plated) as shown furnished as standardcotter or hair pin can be furnished on special order Shackle body: carbon steel, heat treated Shackle pin: alloy steel, heat treated Tolerances: 11/32" unless otherwise indicated esign ultimate strength equals 4 times the working load limit R W P ode inch Pin Working oad Pin Number P W R Number lb. in. in. in. in. in. lb. M702 2X , M703 2X , M704 2X , M705 2X , M706 2X , M706H 2X706H , lloy Web Sling Shackle Web Sling Shackles can be used on web slings from 3 to 6 inches in width Utilize a bolt and nut with linch style pin to secure the assembly in place ll shackles are galvanized for longer life Marked with working load limit (W) and size R W P ode inch Pin Working oad Pin Number P W R Number 12 lb. in. in. in. in. in. lb. M703 2X , M704 2X , M705 2X , M706 2X ,

13 Trawling & ong Reach Shackles Shackles M Trawling Shackle oad rated trawling chain shackles are used for various applications, such as on trawl doors, the rigging of nets, and areas where critical loads are applied. Heat treated bodies Heat treated alloy pins Square head pins for convenience in wrench tightening and loosening Proof load 2.2 times working load limit Ultimate strength 6 times working load limit urable orange powder coat finish R K W P O Working oad P W O R K lb. in. in. in. in. in. in. in. lb. M449 4, M450 6, M451 9, M452 13, M453 17, M454 20, M ong Reach Shackles lloy Steel oad Rated W forged on body Meets the requirements of SME esign factor of 5:1 Offered in self-colored or durable orange powder coat finish W P G I Working oad Screw Pin olt Type P W G Self olored Painted Self olored Painted lb. lb. lb. in. in. in. in. in. 7,000 M7151 M7151P 1.80 M9151 M9151P ,000 M7152 M7152P 2.72 M9152 M9152P ,000 M7154 M7154P 5.86 M9154 M9154P ,000 M7156 M7156P M9156 M9156P ,000 M7157 M7157P M9157 M9157P ,000 M7177 M7177P M9177 M9177P

14 SHKES Shackles NV Shackles ssembly consists of shackle body, bolt, nut & cotter Galvanized coating for protective finish ertified to meet NV standard Offshore ontainers ssemblies comply with NV rules for lifting appliances Exceeds harpy V impact strength of STM J at 20º (31 ft-lb at -4ºF) Each shackle is serialized individually and batch coded for complete traceability of material and manufacturing ertification of compliance supplied with each shipment Shackles are 100% proof tested at the manufacturing facility at 2x W esigned for use with chain, wire rope, and synthetic slings esigned factor of 5:1 or higher in accordance with NV requirements E P R W Working oad P E W R min in. ton in. in. in. in. in. in. lb. 3/4" 7.0 M852NV " 12.5 M854NV /8" 15.0 M855NV /4" 18.0 M856NV /2" 30.0 M857NV

15 Sub ssemblies Shackles NV Master Sub ssemblies Made from Superior Triple lloy Steel Galvanized coating for protective finish ertified to meet NV standard Offshore ontainers Exceeds STM 952 specification for lifting components Exceeds harpy V impact strength of STM J at 20º (31 ft-lb, at -4ºF) Welds exceed harpy V impact strength of 27J at -20º (20 ft-lb, at -4ºF) Each link is serialized individually and batch coded for complete traceability of material and manufacturing ertification of compliance supplied with each shipment inks are 100% proof tested at the manufacturing facility at 2x W esigned for use with chain, wire rope, and synthetic slings esigned to meet SME 30.9 requirements esign factor of 5:1 or higher in accordance with NV requirements. Suitable for use at -50ºF (-46º) vailable in sizes from 1-1/4" to 2" diameter - other sizes available upon request W from metric ton Trade Working oad Master ink imensions Material Inside Inside iameter ength Width Intermediate ink imensions Material Inside Inside iameter ength Width in. lb. in. in. in. in. in. in. lb. 1-1/4" 35,280 S125NV /2" 55,125 S150NV /4" 77,175 S175NV " 100,000 S200NV

16 hain omparison M offers a wide range of welded chains. ll chains meet or exceed requirements of NM & STM standards. ll chain is proof tested to insure you get the highest quality chain in the market. isted below you will find a summary of chain specifications, which can be used as a comparison when selecting the chain for your application. Only Herc-lloy 1000 or Herc-lloy 800 chain should be used for overhead lifting. hain Wire iameter Nominal Herc-lloy 1000 (Grade 100) Inside ength Nominal Inside Width Nominal Per 100 ft. Working oad in. in. in. in. lb. lb. 7/ ,700 9/ ,300 3/ ,800 1/ ,000 5/ ,600 3/ ,300 Herc-lloy 800 (Grade 80) in. in. in. in. lb. lb. 7/ ,100 9/ ,500 5/ ,500 3/ ,100 1/ ,000 5/ ,100 3/ ,300 7/ , , / , ,300 Transport (Grade 70) in. in. in. in. lb. lb. 1/ ,150 5/ ,700 5/ ,700 3/ ,600 3/ ,600 1/ ,300 High Test (Grade 43) in. in. in. in. lb. lb. 1/ ,600 5/ ,900 3/ ,400 1/ ,200 5/ ,000 3/ ,200 Proof oil (Grade 30) in. in. in. in. lb. lb. 3/ / ,300 5/ ,900 3/ ,650 1/ ,500 5/ ,900 3/ ,600 16

17 are, Use & Inspection Herc-lloy 1000 hain Herc-lloy 1000 Slings Herc-lloy 1000 omponents Master ink Sub-ssembly Pear Shape Master ink Hammerlok hain Shortener Rigging Hook levlok Sling Hook Eye Sling Hook levlok radle Grab Hook Eye radle Grab Hook levlok Foundry Hook Eye Foundry Hook levlok Style atchlok 100 Hook Eye Style atchlok 100 Hook earing Swivel Style atchlok 100 Hook ushing Swivel Style atchlok 100 Hook atchlok 100 Reference hart Herc-lloy 1000

18 are, Use & Inspection The life and strength of Herc-lloy 1000 chain slings depend on proper inspection, maintenance and use. For additional information, refer to SME 30.9 and OSH are hain requires careful storage and regular maintenance. Store chains on an frame in a clean, dry place. To avoid corrosion, oil chains before prolonged storage. o not heat Herc-lloy 1000 chain; this will alter its thermal treatment. Use To protect both operators and materials, observe these precautions when using chain slings: efore use, inspect chain and attachments following the instructions under Inspection below. o not exceed working load limit. ny of the factors listed here can reduce the load the chain will hold: - cceleration in rate of load application can produce dangerous overloads. - Variations in the angle of the load to the sling, will change the W, please refer to the chart on page 22 for proper W. - Twisting, knotting or kinking, subjects links to unusual loading, decreasing the working load of the sling. - Use for purposes other than those for which slings are intended, can reduce the working load of the sling. Free chain of all twists, knots and kinks. enter load in hook(s); hook latch must not support load. void sudden jerks when lifting or lowering load. alance all loads; avoid tipping of loads. Use pads around sharp corners. o not drop load on chains. Match the size and working load limits of attachments such as hooks and rings to the size and working load limits of the chain. For overhead lifting, use only alloy chain and attachments. Inspection It is important both to inspect chain slings regularly and to keep a record of all chain inspections. Follow this guide for such an inspection system. efore inspecting, clean chain with a non-acid/non-caustic solvent so that marks, nicks, wear and other defects are visible. Inspect each link for these conditions: - Twists and bends. - Nicks or gouges. - Excessive wear at bearing points Stretch istorted or damaged master links, coupling links or attachments, especially spread in throat opening of hooks. Mark plainly with paint each link or attachment showing any of the conditions listed here to indicate rejection; remove from service until properly repaired. Wear llowances of Herc-lloy1000 hain Measure cross section at link ends to determine wear. If chain is worn to less than the minimum allowable thickness, remove from service. hain in. mm in. mm 7/ / / / / / M hain Inspection Programs M provides chain users with a wide range of informative materials and instructive programs on chain and chain inspection. Our colorful chain safety poster/chart and our factfilled booklet, M ifting, Pulling & inding s Manual PM-10, are available on request. Use of hain & omponents Under Extreme Temperature onditions When the chain itself is subjected to temperatures shown here, working load limits should be reduced as indicated. Temperature Minimum llowable Thickness (T) Reduction of Working oad While at Temperature fter Exposure to Temperature ºF º elow 400 elow 204 None None % None % 5% % 15% % 20% % 25% % 30% % 35% The identification tag found on each chain sling contains this information: Grade Reach Serial Number Number of egs Working oad (at a specific angle of lift) T 18

19 Herc-lloy 1000 hain Herc-lloy 1000 Meets or exceeds many national and international standards 25% higher working load limit when compared to Grade 80 Environmentally friendly gray coating for distinct appearance, ease of identification ertification included with every drum 100% proof tested 1000 hain Working oad hain Part # Nominal hain imensions rum pprox. pprox No. Of inks Part # ength pprox in. lb. in. in. in. lb./ft. per ft. ft. lb. 7/32 2, /32 4, /8 8, /2 15, /8 22, /4 35, How to Select and Order the Proper hain Sling 1. etermine the weight and configuration of the load(s) to be lifted. 2. etermine the type of chain sling required, according to weight and configuration. 3. etermine the size of the body chain according to the working load limits. e sure to take into consideration the effect of the required angle. The working load limit is the maximum load in pounds which should ever be applied in direct tension to a straight length of chain. 4. etermine the reach required to give the desired angle. The reach is measured from the upper bearing surface of the master link to the bearing surface of the lower attachment. If chain slings are to be used in pairs and are to be matched for reach, please indicate when ordering. 19

20 Slings Types of hain Slings In describing the type, the following symbols should be used if attachments are other than standard, give detail specifications. First symbol (basic type) S Single chain sling Single choker chain sling with a standard end link on each end, no hook ouble branch chain sling (2 legs) T Triple branch chain sling (3 legs) Q Quad branch chain sling (4 legs) Second symbol (type of master link or end link) O Oblong master link of standard dimensions Third symbol (type of hook) S Sling hook G Grab hook F Foundry hook atchlok 100 hook dditional coding is defined as follows S djustable single ES Endless single S Single adjustable loop djustable double S Single basket E Endless double ouble adjustable loop ouble basket Single (1 eg) ouble (2 egs) Triple (3 egs) Quad (4 egs) SING ONFIGURTION hain size 90 in. Working oad s for ngles vailable (shown elow) for each Sling Type lb. 7/32 2,700 4,700 3,800 2,700 7,000 5,700 4,000 7,000 5,700 4,000 9/32 4,300 7,400 6,100 4,300 11,200 9,100 6,400 11,200 9,100 6,400 3/8 8,800 15,200 12,400 8,800 22,900 18,700 13,200 22,900 18,700 13,200 1/2 15,000 26,000 21,200 15,000 39,000 31,800 22,500 39,000 31,800 22,500 5/8 22,600 39,100 32,000 22,600 58,700 47,900 33,900 58,700 47,900 33,900 3/4 35,300 61,100 49,900 35,300 91,700 74,900 53,000 91,700 74,900 53,000 Metric O NOT USE T NGES SMER THN

21 Slings djusters on sling allow for easy and safe take up of chain when applications require shorter leg lengths, or when lifting objects of abnormal sizes. Specialty chain slings can be manufactured to suit your specific lifting applications. Herc-lloy 1000 Single djustable ouble djustable djust--ink Single asket ouble asket Single Endless ouble Endless SING ONFIGURTION hain in. Working oad s lb. 60 7/32 9/32 3/8 1/2 5/8 3/4 4,700 7,400 15,200 26,000 39,100 61,100 7,000 2,700 11,200 4,300 22,900 8,800 39,000 15,000 58,700 91,700 22,600 35,300 4,700 7,400 15,200 26,000 39,100 61,600 O NOT USE T NGES SMER THN 60 merican National Standard NSI 30.9, the National ssociation of hain Manufacturers (NM) and the Occupation Safety & Health dministration (OSH) recommend only the use of alloy steel chain for overhead lifting, i.e. sling chain. Slings may be constructed by the user using Herc lloy chain, Herc lloy 1000 or Herc lloy 800 chain and attachments. M lloy chain slings are provided with a durable metal identification tag. The tag is typically affixed to a master coupling link and contains the following data:. of sling. Reach of sling. Working load limit at 90º on a single and 60º from horizontal on multi-leg slings. Serial number E. olumbus McKinnon (Manufacturer s name) and grade of sling F. Number of branches 21

22 omponents olumbus McKinnon is a leader in the Overhead ifting Industry. Since trade marking Herc lloy in 1936, we have continued to add overhead lifting products as required by the industry. Trademarked products such as Herc-lloy chain, levlok hooks and Hammerlok couplers represent a few of the most-recognized and widely-used products in the industry. From master links to eye hooks, we have lifted the industry to new heights with the introduction of Herc-lloy We have one of the most comprehensive lines of high grade overhead lifting chain and attachments in the industry. ll our products are made by olumbus McKinnon to assure form and fit. Herc-lloy a vital part of M omplete ifting Systems From eam...to Hoist...to elow the Hook OMPONENTS hain hain (ulk) hain (rum) Master ink Sub-ssembly Pear Shaped Master ink Hammerlok hain Shortener Rigging Hook levlok Sling Hook w/ atch levlok Sling Hook w/o atch In. mm Page 19 Page 19 Page 24 Page 24 Page 25 Page 25 Page 26 Page 26 Page 27 Page 27 SINGE OUE TRIPE & QU 7/ N/ N/ M7502 N/ N/ 9/ M M / M M / M M / M M / N/ M / N/ N/ M7502 N/ N/ 9/ M M / M M / M M / M M / N/ M / N/ N/ M7502 N/ N/ 9/ M M7503 3/ M M7504 1/ M M7505 5/ M M7507 3/ N/ M

23 omponents Herc-lloy 1000 hain Eye Sling Hook w/ atch Eye Sling Hook w/o atch levlok radle Grab Hook OMPONENTS Eye radle Grab Hook levlok Foundry Hook Eye Foundry Hook levlok Style THOK100 OMPONENTS Eye Style earing Swivel Style ushing Swivel Style In. mm Page 27 Page 27 Page 28 Page 28 Page 29 Page 29 Page 30 Page 30 Page 31 Page 31 SINGE OUE TRIPE & QU 7/ N/ N/ N/ N/ N/ N/ N/ N/ N/ 9/ M M M / M M M / M M M / M M M / N/ N/ N/ N/ N/ 7/ N/ N/ N/ N/ N/ N/ N/ N/ N/ 9/ M M M / M M M / M M M / M M M / N/ N/ N/ N/ N/ 7/ N/ N/ N/ N/ N/ N/ N/ N/ N/ 9/ M M M / M M M / M M M / M M M / N/ N/ N/ N/ N/ N/ M M M M N/ N/ M M M M N/ N/ M M M M N/ 23

24 Master ink & Sub-ssemblies Master ink esigned to accept Herc-lloy 1000 chain and components urable gray powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested Trade Working oad Nominal imensions Material Inside ength Inside Width iameter Type and of hain Sling on Which Used SINGE OUE TRIPE QU in. lb. in. in. in. lb. in. in. in. in. 13/32 5, /32 7/ /2 8, /32 9/32 7/32 7/32 3/4 17, /8 3/8 9/32 9/ , /2 & 5/8 1/2 3/8 3/8 1 1/4 45, /4 5/8 1/2 1/2 1 1/2 70, /4 5/8 5/8 1 3/4 105, /4 3/4 Sub-ssembly esigned for Triple and Quad branch Herc-lloy 1000 chain slings onsists of an Oblong Master ink and two welded Master oupling inks urable gray powder coated finish May be used for mechanical or welded sling assemblies 100% proof tested F E Trade Working oad at 60º ode Type and of hain Master ink Nom. ims. Intermediate ink Nom. ims. Sling on Which Used Material Inside Inside Material Inside Inside iameter ength Width iameter Width ength TRIPE QU E F 24 in. lb. in. in. in. in. in. in. lb. in. in. 1/2 7, /32 7/32 3/4 11, /32 9/ , /8 3/8 1 1/4 39, /2 1/2 1 1/2 58, /8 5/8 1 3/4 91, /4 3/4

25 Pear Shaped Master ink & Hammerlok Pear Shaped Master ink Made from alloy material Proof tested at two times W urable gray powder coated finish ustom sizes available upon request Herc-lloy 1000 Trade atalog No. Working oad Finished ode Inside Inside Inside iameter ength Width Width Type and of hain Sling Single ouble Triple in. lb. in. in. in. in. lb. in. in. in. 1/2 H51 9, /32,9/32 & 3/8 7/32 & 9/32 7/32 3/4 H79 18, /2 3/8 9/32 1 H103 30, /8 1/2 3/8 1-1/4 H129 45, /4 5/8 1/2 1-1/2 H153 71, /4 5/8 1-3/4 H179 86, H , /4 2-1/4 H , Hammerlok New lassic stainless steel non-corrosive retainer E F Working oad oad Pin Kit imensions Max max E F in. lb. in. in. in. in. in. in. lb. 9/32 4, R /8 8, R /2 15, R /8 22, R /4 35, R

26 hain Shortener & Rigging Hook hain Shortener T Quickly and easily adjust chain length of sling when the load has uneven pick points urable gray powder coated finish Marked with both fraction and metric sizes Forged alloy steel - quenched & tempered Mechanically attaches directly to master ring M S (PIN I) G F (PIN I) H J K Working oad ode imensions G H J K F M S T in. lb. in. in. in. in. in. in. in. in. in. in. in. lb. 9/32 4,300 M /8 8,800 M /2 15,000 M /8 22,600 M Rigging Hook arge eye to easily accommodate other G100 fittings Quench & tempered alloy steel urable gray powder coated finish R K G O F T P J H K Working oad ode w/ latch ode w/o latch imensions F G H J K O P R T 26 in. lb. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lb. 7/32 2,700 M7502 M /32 4,300 M7503 M /16 5,700 M7504 M /8 8,800 M7505 M /2 15,000 M7507 M /8 22,600 M7509 M

27 Sling Hooks levlok Sling Hook Herc-lloy 1000 Fraction and metric markings Fatigue rated to Grade 100 specifications Fits Grade 80 and Grade 100 chain New I beam body 100% proof tested urable gray powder coated finish Improved forged latch New E compliant hooks and latches Meets EN 1677 R P H G R P H M (MIN) M (MIN) G O I Working oad ode w/ latch ode w/o latch atch Kit imensions G H I M O P R w/o latch in. lb. in. in. in. in. in. in. in. in. in. lb. 9/32 4, X /8 8, X /2 15, X /8 22, X /4 35, X Eye Sling Hook Fraction and metric markings vailable with or without latch urable gray powder coated finish 100% proof tested Fatigue rated to Grade 100 specifications For welded 7/32 hain Sling use 9/32 Eye Hook S M P O I H E N K G Working oad ode w/ latch ode w/o latch atch Kit imensions E G H I K M N O P S in. lb. in. in. in. in. in. in. in. in. in. in. in. in. in. lb. 9/32 4, /8 8, /2 15, /8 22, /4 35,

28 Grab Hooks levlok radle Grab Hook H J Fits grade 80 and grade 100 chain Fraction and metric markings New I beam body with chain cradle saddle 100% proof tested Fatigue rated to grade 100 specifications urable gray powder coated finish R P M G K Working oad ode imensions G H J K M P R in. lb. in. in. in. in. in. in. in. in. in. lb. 9/32 4, /8 8, /2 15, /8 22, Eye radle Grab Hook Fraction and metric markings urable gray powder coated finish 100% proof tested Fatigue rated to grade 100 specifications ertification of test available For welded 7/32 hain Sling use 9/32 Eye radle Hook M H E K P Working oad imensions E G H I K M P 28 in. lb. in. in. in. in. in. in. in. in. in. in. lb. 9/32 4, /8 8, /2 15, /8 22, /4 35,

29 Foundry Hooks levlok Foundry Hook levlok head designed for easy assembly I beam body design increases grip when removing from load Quench & tempered alloy steel Individually proof tested urable gray powder coated finish (PIN I) R H M G J Herc-lloy 1000 P K Working oad ode imensions G H J K M P R in. lb. in. in. in. in. in. in. in. in. in. lb. 9/32 4, /8 8, /2 15, /8 22, Eye Foundry Hook Throat opening to 4.5 (114 mm) urable gray powder coated finish 100% proof tested Fatigue rated to grade 100 specifications ertification of test available For welded 7/32 hain Sling use 9/32 Eye Foundry Hook M G (REF) H O I E N K R (SPHER.) (REF) Working oad ode imensions E G H I K M N O R in. lb. in. in. in. in. in. in. in. in. in. in. in. in. lb. 9/32 4, /8 8, /2 15, /8 22, /4 35,

30 atchlok 100 Hooks levlok Style High cycling, long life spring Factory replaceable pins I beam construction for greater strength 100% proof tested Fatigue rated to grade 100 specifications urable gray powder coated finish Pin ø M Reach P H F G J K Working oad ode Replace atch Kit Part # imensions H M P F J K G in. lb. in. in. in. in. in. in. in. in. in. lb. 9/32 4,300 M /8 8,800 M /2 15,000 M /8 22,600 M Eye Style arge eye design for use with chain, wire rope and synthetic material Factory replaceable pins 100% proof tested Fatigue rated to grade 100 specifications For welded 7/32 hain Sling use 9/32 Eye odelok Hook urable gray powder coated finish M (Reach) P F H K Working oad ode Replace atch Kit Part # imensions M P F H K 30 in. lb. in. in. in. in. in. in. in. lb. 9/32 4,300 M /8 8,800 M /2 15,000 M /8 22,600 M

31 atchlok 100 Hooks earing Swivel Style The eye easily positions to attach to the load Factory replaceable pins 100% proof tested Fatigue rated to grade 100 specifications ertification of test available For welded 7/32 hain Sling use 9/32 Swivel odelok Hook urable gray powder coated finish M (Reach) F H Herc-lloy 1000 P K Working oad Replace atch Kit Part # imensions H M P F in. lb. in. in. in. in. in. in. in. lb. 9/32 4,300 M /8 8,800 M /2 15,000 M /8 22,600 M ushing Swivel Style The eye easily positions to attach to the load Factory replaceable pins 100% proof tested Fatigue rated to grade 100 specifications ertification of test available For welded 7/32 hain Sling use 9/32 Swivel odelok Hook urable gray powder coated finish M (Reach) P F H K Working oad Replace atch Kit Part # imensions H M P F in. lb. in. in. in. in. in. in. in. lb. 9/32 4,300 M /8 8,800 M /2 15,000 M /8 22,600 M

32 atchlok 100 Hooks atchlok 100 Hook Reference hart ttachment Type W 4:1 W 5:1 in. lb. lb. Hook : 9/32" Maximum W: 4,300 lbs. Grade 80 9/32 3,500 2,800 Grade 100 9/32 4,300 3,440 Round Sling (Vertical) #1 Purple 3,250 2,600 Wire Rope (EIP) max. 3/8 3,775 3,020 Hook : 3/8" Maximum W: 8,800 lbs. Grade 80 3/8 7,100 5,680 Grade 100 3/8 8,800 7,040 Round Sling (Vertical) #2 Green 6,625 5,300 Wire Rope (EIP) max. 9/16 8,400 6,720 Hook : 1/2" Maximum W: 15,000 lbs. Grade 80 1/2 12,000 9,600 Grade 100 1/2 15,000 12,000 Round Sling (Vertical) #3 Yellow 10,500 8,400 Round Sling (Vertical) #4 Tan 13,250 10,600 Wire Rope (EIP) max. 3/4 14,700 11,760 Hook : 5/8" Maximum W: 22,600 lbs. Grade 80 5/8 18,000 14,400 Grade 100 5/8 22,600 18,080 Round Sling (Vertical) #5 Red 16,500 13,200 Round Sling (Vertical) #6 White 21,000 16,800 Wire Rope (EIP) max. 7/8 19,900 15,920 o not apply load unless latch and hook are completely closed and locked Make certain that the latch does not support any part of the load When lifting, make certain that the load is firmly seated in the base (bowl) of the hook Inspect hook and latch periodically. If the hook or latch is damaged or if the latch fails to interlock with the tip, the hook should be removed from service o not exceed the working load limit o not use if the hook is visibly distorted, damaged or worn Keep body and other objects clear of the latch when closing to avoid the pinch point o not side load or tip load hook User should be properly trained and understand safe rigging practices W (Working oad ) is the maximum load a product is designed to support during use 32

33 are, Use & Inspection Herc-lloy 800 hain Herc-lloy 800 Slings Herc-lloy 800 omponents Master ink Forged Master ink Master ink with Flats Flat ottom Master ink Sub-ssembly Sub-ssembly with Flats Master Ring Grab ink Omegalok onnector Hammerlok levlok Sling Hook Eye Sling Hook levlok Grab Hook levlok radle Grab Hook Eye radle Grab Hook Eye Foundry Hook Sorting Hook Shank Hook Eye Grab Hook levis Grab Hook Plate Hook S Hook Stainless Steel Heavy uty Tiedowns Overhead ifting

34 are, Use & Inspection The life and strength of Herc-lloy 800 chain slings depend on proper inspection, maintenance and use. For additional information, refer to SME 30.9 and OSH are hain requires careful storage and regular maintenance. Store chains on an frame in a clean, dry place. To avoid corrosion, oil chains before prolonged storage. o not heat Herc-lloy 800 chain; this will alter its thermal treatment. Use To protect both operators and materials, observe these precautions when using chain slings: efore use, inspect chain and attachments following the instructions under Inspection below. o not exceed working load limit. ny of the factors listed here can reduce the load the chain will hold: - cceleration in rate of load application can produce dangerous overloads. - Variations in the angle of the load to the sling, will change the W please refer to the chart on page 38 for proper W. - Twisting, knotting or kinking, subjects links to unusual loading, decreasing the working load of the sling. - Use for purposes other than those for which slings are intended, can reduce the working load of the sling. Free chain of all twists, knots and kinks. enter load in hook(s); hook latch must not support load. void sudden jerks when lifting or lowering load. alance all loads; avoid tipping of loads. Use pads around sharp corners. o not drop load on chains. Match the size and working load limits of attachments such as hooks and rings to the size and working load limits of the chain. For overhead lifting, use only alloy chain and attachments. Inspection It is important both to inspect chain slings regularly and to keep a record of all chain inspections. Follow this guide for such an inspection system. efore inspecting, clean chain with a non-acid/non-caustic solvent so that marks, nicks, wear and other defects are visible. Inspect each link for these conditions: - Twists and bends. - Nicks or gouges. - Excessive wear at bearing points. Stretch. istorted or damaged master links, coupling links or attachments, especially spread in throat opening of hooks. Mark plainly with paint each link or attachment showing any of the conditions listed here to indicate rejection; remove from service until properly repaired. Wear llowances of Herc-lloy 800 hain Measure cross section at link ends to determine wear. If chain is worn to less than the minimum allowable thickness, remove from service. hain in. mm in. mm 7/ / / / / / M hain Inspection Programs M provides chain users with a wide range of informative materials and instructive programs on chain and chain inspection. Our colorful chain safety poster/chart and our factfilled booklet, M ifting, Pulling & inding s Manual PM-10, are available on request. Use of hain & omponents Under Extreme Temperature onditions When the chain itself is subjected to temperatures shown here, working load limits should be reduced as indicated. Temperature The identification tag found on each chain sling contains this information: Grade Reach Serial Number Number of egs Working oad (at a specific angle of lift) T Minimum llowable Thickness (T) Reduction of Working oad While at Temperature fter Exposure to Temperature F elow 400 elow 204 None None % None % None % 5% % 10% % 15% % 20% % 25% 34

35 Herc-lloy 800 hain Overhead ifting hain Working oad hain ode Material iameter Nominal hain imensions Inside ength Inside Width hain pprox No. Of inks rum ode rum ata ength rum in. lb. in. in. in. lb./ft. per ft. ft. lb. 7/32 2, /32 3, /16 4, N N N 3/8 7, /2 12, /8 18, /4 28, /8 34, , /4 72, ,278 How to Select and Order the Proper hain Sling 1. etermine the weight and configuration of the load(s) to be lifted. 2. etermine the type of chain sling required, according to weight and configuration. 3. etermine the size of the chain according to the working load limits. e sure to take into consideration the effect of the required angle. The working load limit is the maximum load in pounds which should ever be applied in direct tension to a straight length of chain. 4. etermine the reach required to give the desired angle. The reach is measured from the upper bearing surface of the master link to the bearing surface of the lower attachment. If chain slings are to be used in pairs and are to be matched for reach, please indicate when ordering. 35

36 Slings Types of hain Slings In describing the type, the following symbols should be used if attachments are other than standard, give detail specifications. First symbol (basic type) S Single chain sling Single choker chain sling with a standard end link on each end, no hook ouble branch chain sling (2 legs) T Triple branch chain sling (3 legs) Q Quad branch chain sling (4 legs) Second symbol (type of master link or end link) O Oblong master link of standard dimensions Third symbol (type of hook) S Sling hook G Grab hook F Foundry hook atchlok 100 hook dditional coding is defined as follows S djustable single ES Endless single S Single adjustable loop djustable double S Single basket E Endless double ouble adjustable loop ouble basket Single (1 eg) ouble (2 egs) Triple (3 egs) Quad (4 egs) hain Working oad for ngles vailable (shown below) in. lb. 7/32 2,100 3,600 3,000 2,100 5,500 4,400 3,200 5,500 4,400 3,200 9/32 3,500 6,100 4,900 3,500 9,100 7,400 5,200 9,100 7,400 5,200 5/16 4,500 7,800 6,400 4,500 11,700 9,500 6,800 11,700 9,500 6,800 3/8 7,100 12,300 10,000 7,100 18,400 15,100 10,600 18,400 15,100 10,600 1/2 12,000 20,800 17,000 12,000 31,200 25,500 18,000 31,200 25,500 18,000 5/8 18,100 31,300 25,600 18,100 47,000 38,400 27,100 47,000 38,400 27,100 3/4 28,300 49,000 40,000 28,300 73,500 60,000 42,400 73,500 60,000 42,400 7/8 34,200 59,200 48,400 34,200 88,900 72,500 51,300 88,900 72,500 51, ,700 82,600 67,400 47, , ,200 71, , ,200 71, /4 72, , ,200 72, , , , , , ,

37 Slings ny Sling to fit your application Magnet Sling djustable hain Sling Overhead ifting Single asket ouble asket Single Endless ouble Endless SING ONFIGURTION hain Working oad s in. lb. 7/32 3,600 5,500 2,100 3,600 9/32 6,100 9,100 3,500 6,100 5/16 7,800 11,700 4,500 7,800 3/8 12,300 18,400 7,100 12,300 1/2 20,800 31,200 12,000 20,800 5/8 31,300 47,000 18,100 31,300 3/4 49,000 73,500 28,300 49,000 7/8 59,200 88,900 34,200 59, , ,900 47,700 82, /4 125, ,800 72, ,200 37

38 omponents olumbus McKinnon is a leader in quality and manufacturing excellence. With over 130 years of material handling experience, we strive for superior customer service in all aspects of our business. olumbus McKinnon pioneered the welding of Herc-lloy over 70 years ago, and we continue to upgrade our process with the latest in technology and mechanical equipment. We are the original designer of the mechanical coupler link, trademark Hammerlok, as well as the levlok style hook for overhead lifting slings. From beam to hoist to below the hook attachments, the product offering that represents M omplete ifting Systems is unparalleled in the industry. dditionally, diverse training programs in the areas of rigging, applications, safety, and service are components of the package available to users and distributors when they purchase M products. hain and forge divisions are ISO certified companies, and a direct, highly trained, sales force provides expertise in numerous areas. ll rigging products from chain to master links to forged attachments are produced in olumbus McKinnon facilities, thus ensuring form and fit. hain Working oad hain (ulk) hain (rum) Master ink OMPONENTS Master ink w/ Flats Sub- ssembly Sub- ssembly w/ Flats Omega inks in. Page 35 Page 35 Page 40 Page 41 Page 42 Page 42 Page 44 TRIPE & QU OUE SINGE 38 7/32 2, M040 9/32 3, M /8 7, M /2 12, M /8 18, M /4 28, M125 7/8 34, M , M /4 72, M200 7/32 3, M050 9/32 6, M /8 12, M /2 20, M /8 31, M /4 49, M150 7/8 59, M , M /4 125, M250 7/32 5, S063 9/32 9, S /8 18, S /2 31, S /8 47, S /4 73, S200 7/8 88, S , S /4 187, S300

39 omponents Overhead ifting hain Hammerlok levlok Sling Hook w/ atch levlok Sling Hook w/o atch Eye Sling Hook w/ atch OMPONENTS Eye Sling Hook w/o atch levlok Grab Hook levlok radle Grab Hook Eye radle Grab Hook Foundry Hook (Eye) in. Page 44 Page 45 Page 45 Page 45 Page 45 Page 46 Page 46 Page 47 Page 47 OUE SINGE TRIPE & QU 7/ / / / / / / / / / / / / / / / / / / / / / / /

40 Master inks Master ink esigned to accept H 800 chain and components urable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested Trade Working oad atalog No. Nominal imensions Material Inside Inside iameter ength Width Type and size of hain Sling Single ouble in. lb. in. in. in. lb. in. in. 3/8 3,600 H /32 7/32 1/2 6,100 H /32 9/32 3/4 12,300 H /8 3/8 1 20,800 H /2 or 5/8 1/2 1-1/4 31,300 H /4 5/8 1-1/2 49,000 H /8 3/4 1-3/4 73,500 H /8 2 88,900 H / /4 125,200 H /4 2-3/4 187,800 H Forged Master ink Quench and tempered alloy steel 100% proof tested Raised markings for better identification urable orange powder coated finish Fatigue rated to Grade 80 specifications Trade Working oad ode Nominal imensions Material Inside Inside End iameter ength Width 40 in. lb. in. in. in. in. lb. 1/2 5,100 M50P /8 7,700 M62P /4 10,600 M75P ,400 M100P

41 Master inks Master ink with Flats esigned to accept H 800 hain, Wire Rope and Synthetic Use with mechanical and welded assemblies s up to 1 1/4 available with flats to accommodate Omega link 100% proof tested Extra wide body for Wire Rope applications Nominal im. Flat Type & of hain Sling Overhead ifting Trade Working oad Material iameter Inside ength Inside Width Single ouble in. lb. in. in. in. lb. in. in. 7/16 4,200 M /32 & 9/32 1/2 5,750 M /32 5/8 9,000 M /8 9/32 3/4 14,200 M /2 3/8 7/8 17,300 M ,500 M /8 1/2 1-1/4 37,400 M /4 & 7/8 5/8 1-1/2 53,000 M /4 1-3/4 72,150 M /8 2 94,200 M / /4 119,200 M /2 147,150 M /4 2-3/4 178,050 M ,850 M /4 282,650 M /2 327,800 M Flat ottom Master ink esigned to accept H 800 chain and components Made from lloy Steel Extra wide width allows for larger hook usage 100% proof tested hain Trade Working oad Material iameter Inside ength Inside Width in. in. lb. in. in. in. lb. 5/8 & 3/4 1-3/4 73, /8 & , & 1/4 2-1/2 187,

42 Sub-ssemblies Sub-ssembly esigned for triple and quad branch H 800 slings onsists of an Oblong Master link and two Master oupling links urable orange powder coated finish May be used for mechanical and welded sling assemblies 100% proof tested E F Trade atalog No. Working oad at 60 ode Master ink Nominal im. Material iameter Inside ength Inside Width Intermediate ink Nominal im Material iameter Inside ength Inside Width Type & of hain Sling on Which Used E F Triple Quad in. lb. in. in. in. in. in. in. lb. in. in. 1/2 H50-S 7, /32 7/32 3/4 H75-S 14, /32 9/32 1 H100-S 24, /8 3/8 1-1/4 H125-S 36, /2 1/2 1-1/2 H150-S 56, /8 5/8 1-3/4 H175-S 84, /4 3/4 2 H200-S 102, /8 7/8 2-1/4 H225-S 144, /4 H275-S 216, /4 1-1/4 Sub-ssembly with Flats esigned to accept Herc-lloy 800 chain, wire rope and synthetic urable orange powder coated finish 100% proof tested May be used for mechanical and welded sling assemblies E Extra wide body for wire rope applications s up to 1 1/4 intermediate links available with flats to accommodate Omega link F Flat Trade Working oad ode Master ink Nominal im. Material iameter Inside ength Inside Width Intermediate ink Nominal im. Material iameter Inside ength Inside Width E F Type & of hain Sling on which used Triple Quad 42 in. lb. in. in. in. in. in. in. lb. in. in 1/2 4,600 S /8 7,200 S /32 7/32 3/4 11,200 S /32 9/32 7/8 13,840 S ,200 S /8 3/8 1-1/4 29,920 S /2 1/2 1-1/2 42,400 S /4 57,720 S /8 5/8 2 75,360 S /4 3/4 2-1/4 95,360 S /8 7/8 2-1/2 117,720 S /4 142,400 S ,680 S /4 1-1/4 3-1/4 226,120 S /2 262,240 S

43 Master Ring & Grab ink Master Ring Trade Working oad Finished ode Material iameter Made from alloy material Proof tested at two times W urable orange powder coated finish imensions Inside ength Type and of hain Sling Single ouble Triple Quad. Overhead ifting in. lb. in. in. lb. in. in. in. in. 1/2 3, /32 & 9/32 5/8 6, /32 7/32 7/32 3/4 10, /8 9/32 9/32 9/32 7/8 12, /2 1 18, /8 3/8 1-1/4 28, /4 1/2 3/8 3/8 1-1/2 31, /4 53, /8 & 1 5/8 1/2 1/2 2 73, /4 7/8 5/8 5/8 2-1/4 88, /2 141, /4 3/4 7/8 & 1 7/8 & 1 Grab ink Made from alloy material Proof tested at two times the W Economical chain adjuster for single slings urable orange powder coated finish Trade Working oad iameter Inside ength Inside Width Inside Width in. lb. in. in. in. in. lb. 1/2 3, /4 7, , /4 18, /8 28, /2 34, /4 47,

44 onnector inks Omegalok onnector Fraction and metric markings urable orange powder coated finish 100% proof tested Fatigue rated to Grade 80 specifications For use with master link w/flats G E M PIN H Working oad ode oad Pin Retainer Pin imensions E G H M T in. lb. in. in. in. in. in. in. in. in. lb. 9/32 3, /8 7, /2 12, /8 18, Hammerlok ttaches chain to master link and hooks Quench and tempered alloy steel 100% proof tested Fatigue rated Replacement kits available Working oad oad Pin kit imensions 44 in. lb. in. in. in. in. lb. 7/32 2, R /32 3, R /8 7, R /2 12, R /8 18, R /4 28, R /8 34, R , R /4 72, R

45 Sling Hooks levlok Sling Hook vailable with and without a latch Quench and tempered alloy steel M s clevlok head design 100% proof tested fatigue rated urable orange powder coated finish Replacement pin and latch kit available Improved forged latch New E compliant hooks and latches Meets EN 1677 R P H G R P H M (MIN) M (MIN) G O I Overhead ifting Working oad ode w/ latch ode w/o latch atch Kit imensions G H I M O P R w/o latch in. lb. in. in. in. in. in. in. in. in. in. lb. 9/32 3, X /8 7, X /2 12, X /8 18, X /4 28, X Eye Sling Hook vailable with and without latch Quench and tempered alloy steel 100% proof tested Fatigue rated Replacement latch available urable orange powder coated finish S M P O I H E N K G Working oad ode w/ latch ode w/o latch atch Kit imensions E G H I K M N O P S w/o latch in. lb. in. in. in. in. in. in. in. in. in. in. in. in. in. lb. 7/32 2, /32 3, /8 7, /2 12, /8 18, /4 28, /8 34, , /4 72,

46 Grab Hooks levlok Grab Hook H Quench and tempered alloy steel Fatigue rated Replacement pin available uilt without lugs to avoid catching when slipping into tight clearance urable orange powder coated finish G M E K P T Working oad ode oad Pin Retainer Pin imensions E G H K M P T in. lb. in. in. in. in. in. in. in. in. in. in. lb. 9/32 3, /8 7, /2 12, /8 18, levlok radle Grab Hook H M s unique cradle grab design Quench and tempered alloy steel Fatigue rated Replacement pin available urable orange powder coated finish M E K G P T Working oad ode imensions E G H K M P T 46 in. lb. in. in. in. in. in. in. in. in. in. in. lb. 9/32 3, /8 7, /2 12, /8 18, /4 28,

47 Grab Hooks & Foundry Hook Eye radle Grab Hook M s unique cradle grab design Quench and tempered alloy steel 100% proof tested Fatigue rated urable orange powder coated finish M H E K P I G Overhead ifting Working oad ode imensions E G H I K M P in. lb. in. in. in. in. in. in. in. in. in. in. lb. 7/32 2, /32 3, /8 7, /2 12, /8 18, /4 28, /8 34, , /4 72, Eye Foundry Hook H Throat opening up to 6 Quench and tempered alloy steel Fatigue rated to Grade 80 specifications urable orange powder coated finish M G (REF) O I E N K R (SPHER.) (REF) Working oad ode imensions E G H I K M N O R in. lb. in. in. in. in. in. in. in. in. in. in. in. in. lb. 9/32 3, /8 7, /2 12, /8 18, /4 28, /8 34, , /4 72,

48 Sorting Hooks Sorting Hook Quench and tempered alloy steel ong tapered point designed for easy grab in rings, pear links, eyebolts or lifting holes urable orange powder coated finish 5:1 design factor M G E H I F ode ode (With Handle) W at Tip W at bottom of hook E imensions F G H I M Ton Ton in. in. in. in. in. in. in. in. in. in. lb. M129 M129H Shank Hooks Heat treated alloy steel provides a strength without bulk or weight Pre drilled boss allows for latch Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load. The following should be observed: 1. Shanks are not intended for internal threading or swaging 2. To obtain maximum strength threads should be class 1 or 2 3. Thread engagement in nut or object must be a minimum of 1-1/2 times the thread diameter Z X J w/o atch Y O Z H R F P K G T Hook Working oad ode Max Shank iameter atch Hole atch Kit ode K imensions F G H J K O P R X Y Z 48 No. Ton in. in. in. in. in. in. in. in. in. in. in. in. 2 1 M X /2 M X M X M X M X M X

49 ttachments Eye Grab Hook Quench and tempered alloy steel urable orange powder coated finish Meets STM & NM Standards 4:1 esign Factor Not recommended for overhead lifting Working oad Standard Pkg. pprox. Each in. lb. lb. 1/4 3, M /16 4, M /8 7, M /16 6, M /2 12, M /8 18, M Overhead ifting HET TRETE Grade 63 levis Grab Hook Quench and tempered alloy steel urable orange powder coated finish Meets STM & NM Standards 4:1 esign Factor Not recommended for overhead lifting Working oad Standard Pkg. pprox. Each in. lb. lb. 1/4 3, M /16 4, M /8 7, M /16 6, M /2 12, M /8 18, M Grade 63 Note: Refer to M ifting, Pulling and inding Manual for the proper use of Grab Hooks in binding applications. 49

50 Specialty Hooks Plate Hook T Made from alloy material esigned to handle plate steel urable orange powder coated finish vailable as components or attached to certified slings M R N R R W ode Working oad M N T W R in. lb. in. in. in. in. in. in. in. in. in. in. lb. 9/ , / , / , / , / , / , S Hook Made from alloy material Proof tested at two times W urable orange powder coated finish ustom sizes available upon request W embossed on hooks Serialized upon request ode Working oad imensions 50 lb. in. in. in. in. lb , , , , , , , ,

51 Stainless Steel Stainless Steel hain Made from 300 series stainless Higher temperature resistance than H 800 Safely used in the food handling industry vailable components to build single and double slings ess corrosive than standard alloy material hain Working oad ode Nominal im. Material iameter Inside ength Inside Width pprox. # of inks in. lb. in. in. in. lb. 9/32 2, /8 3, /2 6, Overhead ifting Wear llowances of Stainless Steel Measure cross section at link ends to determine wear. If chain is worn to less than the minimum allowable thickness, remove from service. hain Minimum llowable Thickness (T) In. mm In. mm 9/ / / T Use of hain & omponents Under Extreme Temperature onditions When the chain itself is subjected to temperatures shown here, working load limits should be reduced as indicated. Temperature Reduction of Working oad While at Temperature fter Exposure to Temperature F elow 400 elow 204 None None % None % None % None % None % None % None % None Stainless Steel Master ink Made from 300 series stainless Retains strength in high temperatures esigned to be used with stainless steel chain 100% proof tested Trade Working oad Nominal im. Material iameter Inside ength Inside Width in. lb. in. in. lb. 1/2 4, /4 7, ,

52 Heavy uty Tiedowns Meets FMS, VS tiedown requirements Made from high quality alloy steel omestic attachments made by MO an not be used for overhead lifting ighter weight than most transport binder chains oes not degrade in ultra-violet light Permanent identification on chain and attachments Made to order assemblies available in 3 days or less levis Style G80 Heavy uty Tiedowns hain hain Grade Working oad Finish pp. in. lb. ft. lb. 5/ , V20 20 lack / , V25 25 lack /8 80 7, V20 20 lack /8 80 7, V25 25 lack / , V20 20 lack / , V25 25 lack 67.9 levlok Style G80 & G100 Heavy uty Tiedowns hain hain Grade Working oad Finish pp. in. lb. ft. lb. 3/8 80 7, lack 31 3/8 80 7, lack 38 1/ , lack 42 1/ , lack 55 3/ , Gray 31 3/ , Gray 38 Ratchet inders G80 & G100 Heavy uty Tiedowns With hain Use With hain Grade Working oad End Fittings Take Up pp. 52 in. lb. in. lb. 5/ , Hook/Hook /8 80 7, Hook/Hook /8 80 or 100 9, Hook/Hook / , Hook/Hook 8 16

53 G70 Transport hain inder hain Specifications G70 Welded ssembly G70 levis ssembly G70 Rivet ssembly ircraft ssembly G Safety hain G,T,R,S luster ssembly G,T,S luster ssembly G,R luster ssembly J Hook Recovery ssembly Mini J Hook R Hook T Hook J Hook G70 levis Grab G70 Eye Grab Hook G70 levis Slip Hook G70 Eye Slip Hook ever Type oad inder law Hook oad inder Ratchet Type oad inder Tightener oad inder Specialty Forged ever oad inder Removable Handle oad inder E-Z PRO am Release ever inder G43 hain G43 Hanger hain G43 Welded ssembly G43 levis ssembly G43 levis Slip with atch G43 levis Slip (Zinc) G43 Eye Slip Hook with atch G43 Eye Slip Hook (Zinc) G43 levis Grab Hook (Zinc) G43 Eye Grab Hook (Zinc) G30 hain G30 Hanger hain G30 levis Slip Hook G30 Eye Slip Hook G30 levis Grab Hook G30 Eye Grab Hook Turnbuckles arbon hain

54 Transport hain Grade 70 Transport (binding) hain Meets STM & NM standards Meets FMS & VS requirements Thermal heat treated using advanced technology Heat treated for superior wear and toughness 100% proof tested Permanent identification on chain Full Weld Trim hain Working oad ode pp. pp. No. of links Full rum rum Pack ode No. (Yellow hromate Finish) ength Half rum ength Pail ength in. lb. in. in. in. lb./ft. per ft. ft. ft. ft. 1/4 3, /16 4, /16 4, /8 6, /8 6, /2 11, inder hain Specifications This chart indicates the minimum number of chains required to secure loads in the forward direction (0.8g deceleration)* per federal Motor arriers Safety dministration, OT Regulations; per 49FR, Part Paragraph *Refer to 49FR, Parts 392 and 393, for North merican Standard for Protection gainst Falling and Shifting argo for complete regulations Min. # of chians required to secure loads in forward direction by weight of the article in lbs. (kn) hain Grade Working oad 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000 50,000 (22) (44) (67) (89) (111) (133) (156) (178) (200) (222) in. lb. kn Grade 30 Proof oil Grade 43 High Test 5/16 5/16 1,900 3, /8 3/8 2,650 5, /4 3, Grade 70 Transport 5/16 4, /8 6, /32 2, Grade 80 Herc-lloy 9/32 3, /16 4, /8 7, Grade 100 Herc-lloy 3/8 8,

55 hain ssemblies G70 Welded ssembly Meets FMS, VS, OT requirements vailable in custom built lengths ssemblies are available with your choice of end attachments ssemblies are available with mechanical or welded attachments Welded assemblies are proof tested after welding. Full line of lever and ratchet binders to accommodate binder chain offering arbon hain hain Working oad in bag Finish in. lb. ft. lb. 5/16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /8 6, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate

56 Transport hain G70 levis ssembly hain ssemblies Meets all epartment of Transportation requirements No worries with ultra-violet degrading ustom lengths available Required in most states by OT hain Working oad ulk in bag Finish in. lb. ft. lb. Short ink 1/4 3, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, G 25 Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate /2 11, Yellow hromate Standard ink 5/16 4, Yellow hromate /16 4, Yellow hromate /16 4, Yellow hromate /16 4, G 20 Yellow hromate /16 4, Yellow hromate /16 4, G 25 Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate /8 6, Yellow hromate /8 6, G 20 Yellow hromate /8 6, Yellow hromate G70 Rivet ssembly hain Working oad Finish 56 in. lb. ft. lb. Short ink 5/16 4, RV 14 Yellow hromate /16 4, RV 16 Yellow hromate /16 4, RV 18 Yellow hromate /16 4, RV 20 Yellow hromate /8 6, RV 14 Yellow hromate /8 6, RV 16 Yellow hromate /8 6, RV 18 Yellow hromate /8 6, RV 20 Yellow hromate Standard ink 5/16 4, RV 20 Yellow hromate /16 4, RV 25 Yellow hromate /8 6, RV 20 Yellow hromate 30.20

57 irraft ssembly & G Safety hain irraft ssembly hain Minimum reak Strength Finish in. lb. ft. in. lb. 9/32 14, Yellow hromate 6.9 arbon hain G Safety hain esigned for agricultural equipment Meets SE S338 standard ssemblies may be installed as permanent or temporary safety chain Unique latch type hook facilitates positive attachment to chain Identification tag on all chain assemblies Zinc plate finish to prevent premature corrosion hain hain Grade Minimum reak Strength Minimum ength Finish in. lb. ft. 5/ , WR 5' 6" lue right 1/ , WR 5' 6" Yellow hromate 3/ , WR 5' 8" Yellow hromate 57

58 Transport hain luster ssemblies G, T, R & Mini J T Hook Mini J Hook Grab Hook R Hook hain Working oad Finish ustom length of chain available upon request ustom end attachments assortments available to satisfy your needs End attachments available include, R Hooks, T Hooks, Mini J Hooks, Grab Hooks in. lb. ft. lb. 5/16 2, Yellow hromate hain /16 2, Yellow hromate hain /16 2,700 U Self olored /16 2, Yellow hromate hain /16 2,700 U Self olored /16 2, Yellow hromate hain /16 2, Yellow hromate hain /16 2,700 U Self olored /16 2, Yellow hromate hain /16 2,700 U Self olored /16 2, Yellow hromate hain /16 2, Yellow hromate hain G, T, & Mini J T Hook Mini J Hook Grab Hook ustom length of chain available upon request ustom end attachments assortments available to satisfy your needs End attachments available include, R Hooks, T Hooks, Grab Hooks, Mini J 58 hain Working oad Finish in. lb. ft. lb. 5/16 2,700 U Self olored /16 2,700 U Self olored /16 2, Yellow hromate hain /16 2,700 U Yellow hromate hain /16 2,700 U Self olored /16 2,700 U Self olored 14.63

59 luster ssemblies G & R R Hook Grab Hook ustom length of chain available upon request ustom end attachments assortments available to satisfy your needs End attachments available include, R Hooks, T Hooks, S Hooks, Grab Hooks, Mini J hain Working oad Finish in. lb. ft. lb. 5/16 4,700 U Self olored /16 4,700 U Self olored /16 4,700 U Self olored /16 4,700 U Self olored arbon hain Recovery J Hook ssemblies Patented I beam profile towing 15 levlok lloy J Hook levlok style head, no catch points Patented nose design reduces hook slippage on chain oad rest reduces load rolling out of hook bowl (load must be behind rest) esigned for the professional towing G80 Proof oaded ssemblies ll mechanical connections... no welded links Working oad hain ength escription in. lb. ft. 3/8 7, G8 10 Omegalok and Master ink 3/8 7, G9 10 levlok radle Grab 59

60 Transport hain Towing ttachments Mini J Hook esigned specifically for the towing and transport industry esigned for use with 5/16 grade 70 chain Not to be used with 1/4 chain ombinations available for all tie down needs Finishes available are yellow chromate, Self colored and zinc plated Not for overhead lifting F E Working oad (grade 70) (Yellow hromate) (Zinc) imensions E F in. lb. in. in. in. in. in. in. lb. 5/16 4, R Hook esigned specifically for the towing and transport industry esigned for use with 5/16 grade 70 chain Not to be used with 1/4 chain ombinations available for all tie down needs Finishes available are yellow chromate, Self colored and zinc plated Not for overhead lifting E Working oad (grade 70) (Self olored) (Zinc) imensions E 60 in. lb. in. in. in. in. in. lb. 5/16 4, !! WRNING Not for overhead lifting

61 Towing ttachments T Hook esigned specifically for the towing and transport industry esigned for use with 5/16 grade 70 chain Not to be used with 1/4 chain ombinations available for all tie down needs Finishes available are yellow chromate, self colored and zinc plated Not for overhead lifting E arbon hain Working oad (grade 70) (Self olored) (Zinc) imensions E in. lb. in. in. in. in. in. lb. 5/16 4, J Hook I eam construction offers greater strength with less weight and a wider bowl for stability arger tip to help prevent hook from tip loading or slipping off Forged in US vailable in self colored, zinc plated, yellow chromate, and powder coated finishes Not for overhead lifting Grade Working oad Finish escription lb. G70 4, Yellow hromate Forged 8" J Hook G70 4, Yellow hromate Forged 15" J Hook

62 Transport hain G70 Grab Hooks G70 levis Grab Hooks Meets STM & NM standards esigned specifically for transport grade 70 chain 4:1 design factor Yellow chromate finish Not recommended for overhead lifting P W H R Working oad (Yellow hromate) imensions W H R P in. lb. in. in. in. in. in. in. lb. 5/16 4, /8 6, G70 Eye Grab Hooks Meets STM & NM standards esigned specifically for transport grade 70 chain 4:1 design factor Self colored finish Not recommended for overhead lifting W H R P Working oad (Self olored) imensions W H R P in. lb. in. in. in. in. in. in. lb. 5/16 4, /8 6,

63 G70 Slip Hooks G70 levis Slip Hook Meets STM & NM standards esigned specifically for transport grade 70 chain 4:1 design factor Hook embossed with trace code providing traceability throughout the manufacturing and testing process to heat of steel P R W H Working oad imensions W H R P arbon hain in. lb. in. in. in. in. in. in. lb. With atch 5/16 4, W /8 6, W Without atch 5/16 4,700 M /8 6,600 M G70 Eye Slip Hook W Meets STM & NM standards esigned specifically for transport grade 70 chain 4:1 design factor Hook embossed with trace code providing traceability throughout the manufacturing and testing process to heat of steel H R G Working oad imensions W H R G in. lb. in. in. in. in. in. in. lb. 1/4 3,150 M /16 4,700 M /8 6,600 M /16 8,750 M

64 inders ever Type oad inder ll components are forged, no cast parts Forged binders are lighter and stronger than cast binders Under equal force a forged handle will yield and bend while a cast handle may break G30 G43 G70 G80 Working oad Handle Take Up Working oad ength in. in. in. in. lb. in. in. lb. 1/4 1/ , /8 3/8 5/ , /2 1/2 3/ , /8 3/8 3/8 3/ , law Hook oad inder 3. o not operate with anyone on load. 4. lways apply lever binder in straight line hook to hook manner without bending and such that handle goes down when securing load. 5. Tighten binders before moving and recheck frequently. oad binder operating instructions 1. Follow.O.T. Federal Motor arrier Safety Regulations S 392.9, S , and S Inspect before use. Replace worn and deformed binders. ubricate pivot and swivel points for optimum performance. 6. o not exceed working load limit shown on binder - hand effort will tighten binder to working load limit. 7. o not use cheater bar or handle extension as their use can overload binder system and result in injury. 8. Secure handle down with a positive retaining method. 9. Release handle/load with extreme care. Make sure everyone is clear. ever binder handle can snap back over center. Use open palm under handle and push up. G43 G70 Working oad Handle Take Up Working oad ength in. in. lb. in. in. lb. 3/8 - Special Order 5, /8 Special Order 9, /8 3/8 Special Order 6, ! WRNING! oad binding systems store energy which can release suddenly To avoid injury: Operate only by hand from a firm standing position. Operate handle cautiously. Stay clear of handle path: handle may release suddenly. Follow instructions.

65 inders Ratchet Type oad inder Each ratchet component is forged from pure alloy steel Handle is designed loose using self-locking one-way bolts allowing easy removal of unwanted debris such as mud, snow or ice Proof tested to 50% of the minimum breaking strength Gears are permanently welded to the barrel G30 G43 G70 G80 G100 ode End Fittings Working oad Take Up Handle ength arrel O.. (ia. x ength) Screw iameter in. in. in. in. in. lb. in. in. in. in. lb. 1/4 1/ Hook / Hook 2, /16 x 6 3/ Eye / Eye (no hook) 5, /16 x 6 3/ Eye / Eye (no hook) 13, /2 x /8 3/8 5/ ody Only 5, /2 x /2 1/2 3/ ody Only 9, /2 x H Handle Only /8 3/8 5/ Hook / Hook 5, /16 x 6 3/ /8 3/8 3/8 3/ Hook / Hook 7, /2 x /8 3/8 5/16 5/ Hook / Hook 5, /2 x /2 1/2 3/8 3/ Hook / Hook 9, /2 x /8 5/8 1/2 1/ Hook / Hook 13, /2 x /2 1/2 1/ Hook / Hook 12, /2 x /8 3/8 3/8 3/ Hook / Hook 8, /2 x arbon hain Tightener oad inder Features a swivel hook for easier operation Either hook may be permanently attached to chain Rugged cast construction with formed hooks Working oad Handle Take Up Handle ength lb. in. in. lb !! WRNING oad binder systems store energy which can release suddenly 65

66 inders Specialty Forged ever oad inder IXI-O (48385) binders provide extra security by allow the binder to be locked in closed position using a pad lock, linch pin or bolt. OMPRESSION INERS (48758 & 48395) are designed for securing bar and rod steel, lumber, poles and machinery with rubber tires. EZ GR (48325) is a military style binder designed to use the handle leverage to remove slack from the chain before hook-up, achieving correct tension on the first try. G30 G43 G70 Working oad Take Up Handle ength in. in. in. lb. in. in. lb. 3/8 3/8 5/ , /8 3/8 5/ , /8 3/8 5/ , Removable Handle oad inder Removing handle provides greater load security by making it less likely for load to be stolen Reduces overall weight G30 G43 G70 Working oad Handle Take Up Handle ength in. in. in. lb. in. in. lb. 3/8 3/8 5/ ody 5, /2 1/2 3/ ody 9, H Handle !! WRNING oad binder systems store energy which can release suddenly

67 inders E-Z Pro am Release ever inder inder releases effortlessly without the use of any tools or prying Free turning, 360º continuous swivel action in both tongue and clevis for enhanced straight line pull. Highly visible yellow paint finish G30 G43 G Working oad Take Up Handle ength arbon hain in. in. in. lb. in. in. lb. 3/8 3/8 5/ , /2 1/2 3/ , ow energy release binder allows you to release the binder effortlessly, without using any tools or prying. It can actually be released under load with one finger! ue to it s unique design, the handle releases the load at the same point every time, when the handle is at the 12 o clock position. 67

68 arbon hain hain & ssemblies G43 hain Gr-43, commonly called High Test, is manufactured to meet STM & NM specifications. Typical uses include container securement, logging, towing, and marine industry. Gr-43 is available in many finishes and package configurations. "Gr-43 is not to be used for overhead lifting". Meets STM & NM standards vailable in a wide assortment of finishes including, Self olored, urnished, Zinc Plated, Galvanized 50% stronger than Gr-30 hain Permanent identification on chain 100% proof tested vailable in drums, pails, multiple style of assemblies hain Working oad pp. pp. No of inks Self olored Finish Hot ipped Galvanized Finish Full rum ength Half ength Full rum ength rum in. lb. in. in. in. lb. ft. ft. ft. 1/4 2, /16 3, /8 5, /2 9, /8 13, /4 20, G43 Hanger hain hain Working oad Finish in. lb. ft. lb. 1/4 2, G 4 Self olored 2.9 1/4 2, G 9 Self olored 5.8 1/4 2, G 12 Self olored 7.7 3/8 5, G 11 Self olored

69 ssemblies G43 Welded ssembly Meets FMS, VS, NM, & STM standards vailable with welded style hooks No worries with ultra-violet degrading Various end attachments available Finishes are available including; self colored, galvanized, zinc plated hain Working oad ode ode in ags Finish in. lb. ft. lb. 3/8 5, Self olored arbon hain G43 levis ssemblies Meets FMS, VS, NM, & STM standards vailable in clevis style hooks No worries with ultra-violet degrading Various end attachments available Finishes are available including; self colored, galvanized, zinc plated hain Working oad ode ag Pack Finish in. lb. ft. lb. 1/4 2, Self olored /4 2, Self olored /16 3, Self olored /16 3, Self olored /16 3, Self olored /16 3, Self olored /8 5, Self olored /8 5, Self olored /8 5, Self olored /8 5, G 16 Self olored /8 5, Self olored /8 5, Self olored /8 5, Self olored /2 9, Self olored

70 arbon hain G43 Slip Hooks G43 levis Slip Hook w/latch Heat treated pins Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting P W H R Working oad (Zinc) imensions W H R P in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /16 7, /2 9, G43 levis Slip Hook (Zinc) Heat treated pins Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting P W H R Working oad (Zinc) imensions W H R P in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /16 7, /2 9,

71 G43 Slip Hooks G43 Eye Slip Hook (Zinc) Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting W H R G Working oad (Zinc) imensions W H R G arbon hain in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /16 7, /2 9, /8 13, /4 20, G43 Eye Slip Hook with atch (Zinc) W Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting H R G Working oad (Zinc) imensions W H R G in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /2 9,

72 arbon hain G43 Grab Hooks G43 levis Grab Hook (Zinc) Heat treated pins Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting P W H R Working oad (Zinc) imensions W H R P in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /16 7, /2 9, G43 Eye Grab Hook (Zinc) Hooks are heat treated and tempered esigns ultimate strength equals 3 times working load limit, matching NM specifications Hook embossed with trace code providing traceability through manufacturing and testing process to heat of steel Not to be used for overhead lifting W H R G Working oad (Zinc) imensions W H R G 72 in. lb. in. in. in. in. in. in. lb. 1/4 2, /16 3, /8 5, /16 7, /2 9, /8 13, /4 20,

73 G30 hain G30 hain Gr-30, commonly called Proof oil, is manufactured to meet STM & NM specifications. Typical uses include barrier chains, trailer safety chains, light construction, marine industry, etc. Gr-30 is available in a wide assortment of finishes and packaged configurations. "Gr-30 is not to be used for overhead lifting". hain Working oad pp. pp. No of inks in. lb. in. in. in. lb. per ft. 3/ /4 1, /16 1, /8 2, /2 4, /8 6, /4 10, Meets STM & NM standards vailable in a wide assortment of finishes including, Self olored, urnished, Zinc Plated, Galvanized, Powder oated Permanent identification on chain 100% proof tested vailable in drums, pails, multiple style of assemblies arbon hain hain Self olored Finish Zinc Plated Finish Full rum ength Half rum ength Full rum ength Half rum ength Pail ength Full rum ength Half rum Hot ipped Galvanized Finish ength Pail ength in. ft. ft. ft. ft. ft. ft. ft. ft. 3/ /4 5/16 3/8 1/2 5/8 3/ G30 Hanger hain hain Working oad Finish in. lb. ft. lb. 1/4 1, MG 3 Self olored /4 1, MG 4 Self olored /4 1, MG 5 Self olored /4 1, MG 7 Self olored /16 1, Self olored

74 arbon hain G30 Slip Hooks G30 levis Slip Hook esigned to be used with grade 30 chain Heat treated pins Hooks are heat treated and tempered Hooks are embossed with chain grade, fraction size and country of origin (US) Hooks embossed with a trace code Ultimate strength equals 4 times the working load limit, matching NM specifications Not to be used for overhead lifting P W H R Working oad (Zinc) imensions W H R P in. lb. in. in. in. in. in. in. lb. 1/4 1, /16 1, /8 2, /2 4, G30 Eye Slip Hook esigned to be used with grade 30 chain Hooks are heat treated and tempered Hooks are embossed with chain grade, fraction size and country of origin (US) Hooks embossed with a trace code Ultimate strength equals 4 times the working load limit, matching NM specifications Not to be used for overhead lifting W H R G Working oad (Zinc) imensions W H R G in. lb. in. in. in. in. in. in. lb. 3/16-1/4 1, /16 1, /8 2, /16 3, /2 4, /8 6,

75 G30 Grab Hooks G30 levis Grab Hooks Working oad ode (Zinc) esigned to be used with grade 30 chain Heat treated pins Hooks are heat treated and tempered Hooks are embossed with chain grade, fraction size and country of origin (US) Hooks embossed with a trace code Ultimate strength equals 4 times the working load limit, matching NM specifications Not to be used for overhead lifting imensions W H R P P W H R arbon hain in. lb. in. in. in. in. in. in. lb. 1/4 1, /16 1, /8 2, /2 4, G30 Eye Grab Hooks esigned to be used with grade 30 chain Hooks are heat treated and tempered Hooks are embossed with chain grade, fraction size and country of origin (US) Hooks embossed with a trace code Ultimate strength equals 4 times the working load limit, matching NM specifications Not to be used for overhead lifting W H R G Working oad (Zinc) imensions W H R G in. lb. in. in. in. in. in. in. lb. 3/16-1/4 1, /16 1, /8 2, /2 4, For 7/16, 5/8 or 3/4 size use grade 43 Eye Grab Hook 75

76 arbon hain Turnbuckles Turnbuckles Prodct Eye & Eye Jaw & Eye Jaw & Jaw Thread iameter Take Up W Each 76 Eye & Eye Jaw & Eye Jaw & Jaw Hook & Eye Hook & Hook in. in. lbs. in. 0404EE 0404JE 0404JJ 1/ EE 0504JE 0504JJ 5/16 4-1/ EE 0606JE 0606JJ 3/8 6 1, EE 0806JE 0806JJ 1/2 6 2, EE 0809JE 0809JJ 1/2 9 2, EE 0812JE 0812JJ 1/2 12 2, EE 1006JE 1006JJ 5/8 6 3, EE 1009JE 1009JJ 5/8 9 3, EE 1012JE 1012JJ 5/8 12 3, EE 1206JE 1206JJ 3/4 6 5, EE 1209JE 1209JJ 3/4 9 5, EE 1212JE 1212JJ 3/4 12 5, EE 1218JE 1218JJ 3/4 18 5, EE 1412JE 1412JJ 7/8 12 7, EE 1418JE 1418JJ 7/8 18 7, EE 1606JE 1606JJ , EE 1612JE 1612JJ , EE 1618JE 1618JJ , EE 1624JE 1624JJ , EE JJ 1-1/ , EE JJ 1-1/ , EE JJ 1-1/ , EE JJ 1-1/ , EE JJ 1-1/ , EE JJ 1-1/ , Prodct Hook & Eye Hook & Hook Thread iameter Take Up W Each in. in. lbs. in. 0404HE 0404HH 1/ HE 0504HH 5/ HE 0606HH 3/8 6 1, HE 0806HH 1/2 6 1, HE 0809HH 1/2 9 1, HE 0812HH 1/2 12 1, HE 1006HH 5/8 6 2, HE 1009HH 5/8 9 2, HE 1012HH 5/8 12 2, HE 1206HH 3/4 6 3, HE 1209HH 3/4 9 3, HE 1212HH 3/4 12 3, HE 1218HH 3/4 18 3, HE 1412HH 7/8 12 4, HE 1418HH 7/8 18 4, HE 1606HH 1 6 5, HE 1612HH , HE 1618HH , HE 1624HH , HE 2418HH 1 1/2 18 7, HE 2424HH 1 1/2 24 7,

77 G80 Winch ine / Tail hain Side hain law ross hain ross hain Hooks Machine hain Straight oil hain Straight ink Sash hain uoy hain rive Sprockets ong Wall Mining hain Padless Shackle onnectors Special hain onnector Grinding Mill iner olt Specifications Specialty hain

78 Specialty hain Winch ine / Tail hain Gr-80 vailable in Grade 80 Most comprehensive line in the market Working oad s up to 47,700 lbs Odd number of links to prevent twisting of chain during hook up ll assemblies 100% proof tested hain Working oad Finish in. lb. in. lb. 5/8 18, lack /4 28, lack /8 34, lack , lack Side hain Made from Mild arbon Steel Use to attach cross chain on the rim of tires vailable in Zinc Plated upon request Trade Polished inks in. in. in. per ft. lb. / ft. 6/ / / / / law ross hain Made from tear drop shape steel for improved traction ommercial grade chain for heavy duty trucks ase hardened for longer wear omponents available to fit chain ut lengths available from 7 to 27 links Trade ode Quantity Per Pack Finish 78 ft. in. in. in. lb. / ft. 7/ Self olored / Self olored / Self olored 1.60

79 Specialty hain ross hain Hooks Trade ode Finish in. in. in. in. lb. / each # Self olored 0.17 # Self olored 0.27 # Self olored 0.31 # Self olored 0.44 Machine hain Straight ink Trade Working oad ode Quantity Per Pack pp. pp. No. of inks Specialty hain lb. ft. in. in. in. lb. / ft. per ft. # # # / / / / oil hain Straight ink Trade Working oad ode Quantity Per Pack pp. No. of pp. inks lb. ft. in. in. in. lb. / ft. per ft. # # # / / / /

80 Specialty hain Sash hain Meets or exceeds STM & NM standards where applicable vailable in various finishes Sold by carton, reel or pails ustom cuts for OEM applications are available Typically uses for sash chain are pulley applications in windows and window sashes. Trade Working oad Zinc Plated Quantity Per arton pp. pp. No. of inks lb. ft. in. in. lb. / ft. per ft uoy hain E F hain Min. reak Strength ode hain imensions Endlink imensions E F Finish in. lb. ft. in. in. in. in. in. in. lb. / ft. 1/2 15, Self olored /2 15, Self olored /4 32, Self olored /4 32, Self olored , Self olored , G Hot dipped Galvanized /8 77, Self olored /4 91, Self olored

81 rive Sprockets rive Sprocket - Replaceable Teeth F E hain Number of Teeth E (iameter) F mm. in. in. in. in. in. in. 14 x x Specialty hain ast rive Sprocket E hain Number of Pockets (iameter) (iameter) (iameter) E in. in. in. in. in. in. lb. 14 x x

82 Specialty hain Mining hain To meet the specific needs of the mining industry, olumbus McKinnon orporation manufactures high specification mining chain and components for ong Wall applications. From chain to sprockets, to connectors, we have the hardware to keep the product moving. hain and components are all made by M, assuring form and fit of each piece. ombining the long wall product line with our other products, we have one of the most comprehensive offerings in the market for your mining applications. ong Wall Mining hain vailable in carburized and thru hardened M carburized chain is processed with the latest technology to provide excellent strength and wear properties M thru hardened chain yields exceptional strength properties Wide assortment of attachments to accommodate chain hain is calibrated to assure fit when assembling assemblies Match pairs in various lengths are available ll chain and components are built by M to insure form and fit Minimum reak hain arburized Thru Hardened arburized Thru Hardened (min) (max) Finish pp. pp. No of links mm. lb. lb. in. in. in. in. lb. / ft. per ft. 14 X 50 36,500 56, Self olored X 64 65,000 92, Self olored X 86 75, , Self olored X 92 90, , Self olored

83 Mining hain Padless Shackle onnectors E E G F F hain olt ode E F G mm. in. in. in. in. in. in. in. lb. 1 olt 14 X 50 5/8-11 UN X 2-1/2" Gr- M14J X 64 5/8-11 UN X 3" Gr-8 M18J X 86 7/8-9 UN X 4" Gr-8 M22J x UN X 4-1/2" Gr-8 M26J olt 14 X 50 5/8-11 UN X 2-1/2 Gr-8 M14J X 64 5/8-11 UN X 3" Gr-8 M18J X 86 5/8-11 UN X 3-1/2 Gr-8 M22J x 92 7/8-9 UN X 4" Gr-8 M26J Specialty hain Special hain onnector G F E hain ode E F G olt (Gr-8) mm. in. in. in. in. in. in. in. in. lb. 14 X 50 M14H /8-11 UN X 2-1/ X 64 M18H /8-11 UN X

84 Specialty hain Grinding mill liner bolt specifications Torque values assume bolt is dry. ubricants, planting, etc., can reduce these values. ister Grade 5 olt Proof oad iameter PSI Tensile Strength PSI min. Recommended Torque UN UNF 8-UN ister Grade 2 olt Proof oad iameter PSI Tensile Strength PSI min. UN UNF 8-UN in. ft./lb. ft./lb. ft./lb. 3/4 55,000 74, /8 33,000 60, ,000 60, /8 33,000 60, /4 33,000 60, /2 33,000 60,000 1,012 1,138 1, /4 33,000 60,000 1,596 1,840* 1, ,000 60,000 2,400 2,774* 2,659 ister Grade 2 olt Proof oad iameter PSI Tensile Strength PSI min. Recommended To rque Recommended To rque *12-UN UN UNF 8-UN in. ft./lb. ft./lb. ft./lb. 3/4 85, , /8 85, , , , /8 74, , , /4 74, ,000 1,308 1,449 1, /2 74, ,000 2,276 2,561 2,417 STM-449 olt Proof oad iameter PSI Tensile Strength PSI min. UN UNF in. ft./lb. ft./lb. 1-3/4 55,000 90,000 2,571 2, ,000 90,000 3,867 4,285 STM-354 olt Proof oad iameter PSI Tensile Strength PSI min. Recommended Torque Recommended Torque UN UNF in. ft./lb. ft./lb. ft./lb. in. ft./lb. ft./lb. 3/4 120, , Grade 7/8 120, , /4 105, ,000 4,832 5, , ,000 1,050 1,149 1, , ,000 7,267 8, /8 120, ,000 1,488 1,669 1,541 Grade 1-1/4 120, ,000 2,100 2,325 2, /4 120, ,000 5,763 6, /2 120, ,000 3,653 4,111 3, , ,000 8,667 9,603 84

85 Swage Socket (open) Swage utton Swage Socket (closed) Swaging Sleeve for Flemish Eye Mid Grip lips Wire Rope lips Piggy ack Wedge Socket lips Thimbles Wire Rope attachments

86 Wire Rope ttachments Swage Socket (open) Forged from fine grain, special bar quality steel Spheroidized annealed for cold swaging Recommended for use on 6 x 19 or 6 x 37 IWR regular lay wore ropes. an also be used on galvanized bridge rope. NOT FOR USE ON FIER ORE OR NG Y ROPES Sockets have 100% efficiency rating based on catalog strength of wire rope when properly applied O H F E M Y ode imensions E F H M O Y fter Swage dia. in. in. in. in. in. in. in. in. in. in. in. in. lb. 1/ /2 4-3/4 2-1/8 4 5/16 11/16 1-3/ / /4 6-1/4 3-3/16 5-5/16 13/32 13/16 1-5/ / /4 6-1/4 3-3/16 5-5/16 13/32 13/16 1-5/ / /16 4-1/4 6-11/16 1/ / /16 4-1/4 6-11/16 1/ / /4 9-9/16 5-5/16 8-1/8 5/8 1-1/4 2-1/ / /4 9-9/16 5-5/16 8-1/8 5/8 1-1/4 2-1/ / / /16 6-3/8 10 3/4 1-1/ / /4 13-5/8 7-7/ /8 15/16 1-3/4 3-3/ /4 15-5/8 8-1/2 13-3/8 1-1/ / /4 17-1/2 9-9/ /16 2-1/4 4-1/ / /4 19-7/ /8 16-1/2 1-3/16 2-1/ / /4 21-1/ / /8 1-5/16 2-1/2 5-1/ / /4 23-1/4 12-3/4 19-3/4 1-7/ / / /4 27-1/8 14-7/ /16 3-1/

87 Wire Rope ttachments Swage Socket (losed) Forged from fine grain, special bar quality steel Spheroidized annealed for cold swaging Recommended for use on 6 x 19 or 6 x 37 IWR regular lay wire ropes. an also be used on galvanized bridge rope. NOT FOR USE ON FIER ORE OR NG Y ROPES Sockets have 100% efficiency rating based on catalog strength of wire rope when properly applied E H K ode imensions E H K fter Swage dia. in. in. in. in. in. in. in. in. in. in. lb. 1/ / /2 2-1/8 4-3/8 3-1/ / / /16 3-3/16 5-1/2 4-1/ / / /16 3-3/16 5-1/2 4-1/ / /8 4-1/4 6-15/16 5-3/ / /8 4-1/4 6-15/16 5-3/ / / /8 5-5/16 8-3/4 7-1/ / / /8 5-5/16 8-3/4 7-1/ / /16 6-3/8 10-3/8 8-5/ / / /2 7-7/ /8 10-1/ /4 8-1/2 13-3/4 11-1/ / / / /4 12-3/ / /4 10-5/8 17-1/4 14-3/ / / / / /8 15-3/ / / /2 12-3/4 20-3/ / / / Swage uttons WR ttachments Rope iameter Wi imensions P Wi P Fittings machined from specially selected and processed low carbon steel uttons have 98% efficiency rating based on catalog strength of wire rope when properly applied in. in. in. lb. 1/ / / / / / / / / / / / / / /

88 Wire Rope ttachments Swaging Sleeve for Flemish Eye arbon steel sleeves come with unique color change quality control feature- color changes intensity once sleeve has been pressed verifying that swaging has occurred Zinc plating extends shelf life and resists rusting olor coding helps determine size and simplifies inventory Seamless construction Fits standard industry dies Mill certified, annealed low carbon steel provides consistent swaging without cracking No need for 16th size dies - O.. of 16th sizes same as next largest sleeve size Wi1 Wi Wo P1 P Rope iameter ode imensions P Wo Wi1 Wi P1 Wall Thickness iameter fter Swage in. in. in. in. in. in. in. in. lb

89 Wire Rope ttachments Mid-Grip lips (ouble Saddle) Meets or exceeds FF--450 specifications, Type III, lass 1 and will provide maximum holding strength llow full arc wrench swing for quicker installation, retightening or disassembly of nuts Forged from special quality steel with sizes clearly marked on the saddle Galvanized with galvanized heavy hex nuts Furnished unassembled in poly bags and in factory packs of 20 N M E G F ode ode (nut) imensions E Thread F G pprox. in. in. in. in. in. in. in. in. in. in. in. in. ft./lb. lb. 3/16 M / /4 M / /16 M / /8 M / /16 M / /2 M / /16 M / /8 M / /4 M / M N Min. Number of lips Rope Turn- ack Torque WR ttachments Proper use of Mid-Grip lips 1. Refer to chart above in following these instructions. Turn back specified amounts of rope from thimble or loop. pply first clip one base width from dead end of rope. Tighten nuts evenly, alternating from one nut to the other until reaching the recommended torque. 2. When two clips are required, apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to step When three or more clips are required, space additional clips between first two - take up rope slack - tighten nuts on all clips, alternating from one nut to the other until reaching the recommended torque. 4. pply an initial load equal to loads expected in use. Inspect for proper spacing and retighten the nuts to the recommended torque. Refer to additional notes concerning wire rope clips on next page

90 Wire Rope ttachments Wire Rope lips E H F G ode imensions E F G H Min No lips Torque Rope Turnbuckle in. in. in. in. in. in. in. in. in. ft./lb. in. lb. 1/8* M244 1/8-24UN 23/32 7/16 15/32 13/32 3/8 13/16 15/ /2 3-1/4 5 3/16* M245 1/4-20UN 31/32 9/16 19/32 1/2 1/2 15/16 1-5/ /2 3-3/4 9 1/4 M246 5/16-18UN 1-1/32 1/2 3/4 31/32 9/16 1-3/16 1-7/ /4 18 5/16 M247 3/8-16UN 1-3/8 3/4 7/8 23/32 11/16 1-5/ / /4 30 3/8 M248 7/16-14UN 1-1/2 3/4 1 29/32 3/4 1-5/8 1-15/ /2 42 7/16 M249 1/2-13UN 1-7/ /16 1-1/16 7/8 1-25/32 2-5/ /2 M250 1/2-13UN 1-7/ /16 1-1/8 7/8 1-29/32 2-5/ /2 75 9/16 M296 9/16-12UN 2-3/8 1-1/4 1-5/16 1-1/4 15/ /32 2-1/ /8 M251 9/16-12UN 2-3/8 1-1/4 1-5/ /32 15/ / /4 M252 5/8-11UN 2-3/4 1-7/16 1-1/2 1-7/16 1-1/ / / /8 M253 3/4-10UN 3-1/8 1-5/8 1-3/4 1-19/32 1-1/4 2-7/16 3-5/ M254 3/4-10UN 3-1/2 1-13/16 1-7/8 1-25/32 1-1/4 2-5/8 3-5/ /8 M255 3/4-10UN 3-7/ /32 1-1/4 2-13/ / /4 M256 7/8-9UN 4-1/4 2-1/8 2-5/16 2-3/16 1-7/16 3-1/8 4-1/ /8 M257 7/8-9UN 4-5/8 2-5/16 2-3/8 2-1/4 1-7/16 3-1/8 4-1/ /2 M258 7/8-9UN 4-15/16 2-3/8 2-19/32 2-1/2 1-7/16 3-1/8 4-7/ Proper use of Wire Rope lips 1. Refer to the chart above in following these instructions. Turn back specified amount of rope from thimble or loop. pply first clip one base width from dead end of rope. pply U-bolt over dead end of wire rope - live end rests in saddle. Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque. 2. When two clips are required, apply the second clip as near the thimble or loop as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to Step 3. ead End ive end Saddle 3. When three or more clips are required, space additional clips equally between the first two - take up rope slack - tighten nuts on each U-bolt evenly, alternating from one nut to the other until reaching the recommended torque. 4. pply an initial load equal to loads expected in use. Inspect for proper orientation and spacing of clips and retighten the nuts to recommended torque. U-bolt ! WRNING! Improper installation and use of wire rope clips can result in injury. To avoid injury: Install and use only as instructed herein.

91 Wire Rope ttachments Piggyback Wedge Socket lips F G E ode Saddle U-olt imensions E F G Heavy Hex Nut galv. Torque Min. Tail in. in. in. in. in. in. in. in. ft./lb. in. lb. 3/8 M248 1X248 2X248 7/16-14UN /16 M249 1X249 2X250 1/2-13UN /2 M250 1X250 2X250 1/2-13UN /16 M296 1X296 2X251 9/16-12UN /8 M251 1X251 2X251 9/16-12UN /4 M252 1X252 2X252 5/8-11UN /8 M253 1X253 2X253 3/4-10UN M254 1X254 2X254 3/4-10UN /8 M255 1X255 2X255 3/4-10UN / /4 M256 1X256 2X256 7/8-9UN / /8 M257 1X257 2X257 7/8-9UN / /2 M258 1X258 2X258 7/8-9UN WR ttachments Proper use of Piggyack Wedge Socket lips 1. ead end wire rope tail length should be at least 6 rope diameters, but not less than 6 inches beyond the wedge socket. Figure pply U-bolt and first saddle on dead end rope and the second saddle on live end rope. Install nuts. Figure 1 & 2 3. Position the dual saddle clip so that 3 to 4 inches of dead end rope remain beyond the clip. Figures 1 & Tighten nuts evenly. lternate tightening each nut until reaching the required torque specified. Figure heck that clip does not pinch or clamp the live wire rope. pply an initial test load equal to the loads expected in regular use. e certain rope is secured properly in the wedge socket prior to any use. 6. Inspect for proper rope alignment with wedge socket and retighten the nuts to the specified torque. 91

92 92 Notes

93 Heavy uty Hoist Ring Specialty Engineered Hoist Ring Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts J Weld-On lloy ifting Hook Yale Import Weld-On ifting Hook Rigging Hook Swivel Rigging Hook Z Universal Plate lamp X Heavy-uty Hinged Universal Plate lamp Y Hinged Universal Plate lamp J Gentle Grip lamp TTR Girder lamp H Heavy uty Horizontal Plate lamp P Pile Pinching lamp TTG Horizontal Girder lamp G Girder Turning lamp THK Horizontal HG lamp TP Screwlok eam lamp with Shackle S Twin eam lamp THS TSH TG ontainer ifting lamps HG Hand Grip ady ifters elow the Hook

94 Hoist Rings Heavy uty Hoist Ring Forged Pivots 180º and swivels 360º simultaneously ack and side pins constructed of one piece of forged alloy steel 100% magnetic particle inspected ale and center body are closed die forged to assure superior grain flow and consistent dimensional accuracy arge bale allows use of a variety of hook sizes F M E ode Rated oad imensions E F Thread M Torque oad lb. in. in. in. in. in. in. in. Ft.-oad lb / / / , / , / , / , / , / , / , / , / , / , / , / , / , / , , , , / , / , / , , ! WRNING! Improper installation and use of hoist rings can cause injury To avoid injury: o not exceed rated load. Install rings per instructions. Verify full 360º seating - Retorque periodically. onsult angular lifting graph when lifting at other than 90º.

95 Hoist Rings Specialty Engineered Hoist Ring Machined Pivots 180º and swivels 360º simultaneously ale and shoulder pin machined from alloy steel Patented design provides shoulder pin retention with specialized clip Easily disassembled for periodic non-destructive inspection Special available in stainless steel and metric sizes F M E ode Rated oad E imensions F Thread H M lb. in. in. in. in. in. in. in. lb / / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , / , , , , , , , / , / , / , / , / , , elow the Hook 95

96 Hoist Rings Hoist Ring (Metric) F M E ode Rated oad imensions E F Thread M Torque oad N.M. Kg mm mm mm mm mm mm Kg M8x M8 x M10 x M10 x , M12 x , M12 x , M16 x , M16 x , M20 x , M20 x , M20 x , M24 x , M24 x , M30 x , M30 x , M30 x , M36 x , M42 x , M48 x ngular ifting Graph Effect of Hoist Ring ngle on oad INSTTION INSTRUTIONS: rill and tap workpiece for hoist ring screw with axis vertical to mounting surface. Work surface should be flat and smooth to provide full 360 flush seating for the bushing flange. (SFETY NOTE: Some loosening may develop after prolonged service in a permanent installation. It is advisable to periodically re-tighten the mounting screw to maintain the specified torque value.) The use of free fit spacers between the bushing flange and mounting surface is not recommended as this will reduce the safe load rating on angularly applied loads. Hoist ring must be free to swivel 360 and pivot 180 at all times. 96

97 Hoist Rings Hoist Ring Swivel R Hoist Rings are heat treated 6:1 design factor Screws are not included E ode Rated oad imensions E R Torque oad High Strength Screws Screw Thread Screw ength lb. in. in. in. in. in. Ft.-oad lb. in , /4 5/16 2-1/2 1/ , , /2 2-1/4 3/8 3-3/16 5/ , , /8 1/2 3-7/8 3/ , , /8 3/4 5-1/4 7/ , , / / , elow the Hook 97

98 elow the Hook Shoulder Eyebolts Forged Steel Heat treated, quenched & tempered Meets IFI standards, STM 489, NSI/SME, Wi P1 d P Shank iameter Working oad imensions Wi P1 P d Thread (UN-2) If in doubt, consult a rigging handbook or discuss with a qualified person in. lb. in. in. in. in. lb. 1/ / / / / , / / , / / , / / , / / , / / , / , / , / / , / / , / lb.note: o not exceed the working load limit - reduce the working load limit according to the adjacent table if loading other than true vertical. Inspect eyebolts before use. o not use if bent more than 15º or if wear of more than 10% of original dimension is evident. Install with shoulder at 90º to axis of hole to assure total contact of shoulder. Torque nut/eyebolt to assure proper seating. heck seating after initial loading. If installing in tapped hole, make sure depth of thread engagement is at least 1-1/2 times bolt diameter. Thread fit must also be good-tight, not loose-sloppy. Where eyebolts must be aligned, a washer or shim may be placed under the shoulder to permit alignment when tightened. To minimize the bending movement, always apply load in the direction of the plane of eye. Reduce working load limit according to table if loading other than true vertical Never insert a hook tip in an eyebolt to load. o not use a sling reeved through an eyebolt or a pair of eyebolts using a shackle. J Weld-on lloy ifting Hook Working oad pprox. Each Replacement atch lb. lb. lb. in. 2, M4301 4X4301 6, M4303 4X , M4305 4x , M4310 4x4310 esign Factor 5:1 Made in the U.S.. Yale Import Weld-On ifting Hook Working oad pprox. Each Replacement atch 98 lb. lb. lb. in. 2, X4301 6, X , x , x4310 esign Factor 4:1

99 Rigging Hooks Rigging Hook uilt in distortion detectors oad rating marked on each hook body esign factor 5:1 Pre-drilled latch tab allows addition of latch arbon hooks have a clear protective coating to resist rust and for cleaner handling (use suffix when ordering carbon clear finish, use suffix G when ordering hot dip galvanized) R K G H K O T J W lloy ode ode w/o latch w/ latch W arbon ode w/o latch ode w/ latch imensions G H J K O R T ton ton in. in. in. in. in. in. in. in. in. in. in. in. lb. 1 M6402 M6502 3/4 M6402 M /2 M6403 M M6403 M M6404 M /2 M6404 M M6405 M M6405 M M6407 M M6407 M M6409 M M6409 M M6411 M /2 M6411 M M6415 M M6415 M M6422 M M6422 M Swivel Rigging Hook esign factor 5:1 Pre-drilled for latches Hook and latch assemblies furnished separately Powder coated orange arbon swivel hooks are technically advanced Micro-alloy which requires no secondary heat treat lloy swivel hooks are heat treated quenched and tempered I H S R G O T elow the Hook W lloy ode w/o latch ode w/ latch W arbon ode w/o latch ode w/ latch imensions G H I R S T O ton ton in. in. in. in. in. in. in. in. in. in. in. in. lb. 1 M3402 M3502 3/4 M3402 M /2 M3403 M M3403 M M3404 M /2 M3404 M M3405 M M3405 M M3407 M M3407 M M3409 M M3409 M M3411 M /2 M3411 M M3415 M M3415 M M3422 M M3422 M

100 amlok lamps Z Universal Plate lamp ody of clamp is welded construction an be used to lift plate from horizontal to vertical position and vice versa lamp jaws and pads are manufactured from high tensile steel H G E F Model Working oad Min Max Jaw apacity imensions E F G H lb. lb. in. in. in. in. in. in. in. in. in. lb. Z ,100 0 to 5/ Z ,300 0 to 3/ Z ,400 0 to 1-1/ Z ,600 0 to 1-1/ Z924 1,100 8,800 0 to 1-1/ Z924/* 1,100 8, /8 to 2-3/ Z926 1,600 13,200 0 to Z928 2,150 17,600 0 to Z928/* 2,150 17,600 2 to Z9210 3,350 22,000 0 to Z9210/ 3,350 22,000 2 to Z9215* 6,650 33,000 0 to Z9215/* 6,650 33,000 2 to Z9220* 8,850 44,000 0 to 2-1/ Z9220/* 8,850 44, /2 to Z9230* 13,250 66,000 0 to 2-1/ *Not Stocked X Heavy-uty Hinged Universal Plate lamp an be used to lift plate from horizontal to vertical position and vice versa Vertically racked plates can be turned over due to the in-built lifting eye and link G E F H I Model Working oad Min Max Jaw apacity imensions E F G H I 100 lb. lb. in. in. in. in. in. in. in. in. in. in. lb. X3 1,000 6,600 0 to 1-1/ X6 2,650 13,200 0 to X6/* 2,650 13,200 2 to X8* 3,550 17,600 0 to X8/* 3,550 17,600 2 to X10* 4,400 22,000 0 to X10/* 4,400 22,000 2 to *Not Stocked

101 amlok lamps Y Hinged Universal Plate lamp an be used to lift plate from horizonta to vertical position and vice versa Fitted with a cam operated closing mechanism that can be replaced with a chain pull open/close mechanism I F H E G Working oad imensions Model Min Max Jaw apacity E F G H I lb. lb. in. in. in. in. in. in. in. in. in. in. Y ,200 0 to 3/ Y ,400 0 to 1-1/ Y3 1,350 6,600 0 to 1-1/ Safe loads for two clamps Model ode ngle Y1 Y2 Y degrees lb. lb. lb ,400 8,800 13, ,200 4,400 6, ,100 2,200 3,300 J Gentle Grip lamp O elow the Hook esigned to lift plates without marking or damaging the surface finish Particularly suitable for lifting thin gauge steel plate, aluminum and stainless steel E F Model Working oad Min Max Jaw apacity imensions E F lb. lb. in. in. in. in. in. in. in. lb. J ,100 0 to 3/ J ,300 0 to 3/

102 amlok lamps TTR Girder lamp esigned to lift and transport structural steel beams in horizontal position lamp designed with the hook as near as possible to the center of gravity of the beam ong beams should be lifted using 2 clamps attached to opposite beam flanges E F Model Working oad Min Max Flange imensions E F lb. lb. in. in. in. in. in. in. in. lb. TTRO ,600 1/4 to 5/ TTR ,300 1/4 to TTR3* 700 6,600 1/4 to *Not Stocked H Heavy uty Horizontal Plate lamp Used in pairs the H clamp is designed for loading process machines and to lift and transport sheet steel plate in horizontal position Standard smooth jaw can be replaced with serrated hardened steel teeth by request esigned to be used with 2 legged slings only Model Working oad (per pair) Jaw apacity imensions E F G (per pair) 102 lb. in. in. in. in. in. in. in. in. lb. H1 2,200 1/4 to 1-1/ H2 4,400 1/4 to 1-1/ H2/ 4,400 3/4 to H4 8,800 1/4 to 1-1/ H4/ 8,800 2 to H6 13,200 1/4 to H6/ 13,200 2 to H8 17,600 1/4 to H8/ 17,600 2 to H10 22,000 1/4 to H10/ 22,000 2 to HH8* 17,600 1/4 to HH8/ 17,600 2 to *Not Stocked

103 amlok lamps P Pile Pitching lamp esigned specifically for pitching sheet steel piling Perfect designed clamp for heavy construction Rope is fitted for easy release from the ground These are not designed to extract driven piles, use the PP series clamps for this F E *These clamps are not designed to extract a driven pile and must NOT be used for this under and circumstance. Model Working oad imensions E F lb. in. in. in. in. in. in. lb. P2 4, P3 6, P5 11, TTG Horizontal Girder lamp esigned to lift and transport structural steel beams in horizontal position Fitted with a amlok spring operated safety lock and is operated by pulling the lock upwards ong beams should be lifted using 2 clamps attached to opposite beam flanges elow the Hook E F Model Working oad Min Max Plate imensions E F lb. lb. in. in. in. in. in. in. in. lb. TTG ,300 0 to 1-1/ TTG ,600 0 to 1-3/ TTG4.5* 1,000 9,900 0 to 1-1/ TTG7.5* 1,650 16,500 0 to 1-3/ *Not Stocked 103

104 amlok lamps G Girder Turning lamps an be used on eams, Fabrications, hannels, RSJ s an lift and turn beams up to 90º Fitted with a cam/spring operated safety lock ong lengths of beam should use 2 clamps H I F G E Model Working oad Min Max Jaw apacity imensions E F G H I lb. lb. in. in. in. in. in. in. in. in. in. in. lb. G ,200 0 to 5/ G ,400 0 to 1-1/ G ,800 0 to 1-1/ G6 1,350 13,200 7/16 to THK Horizontal esigned to lift and transport structural steel beams in horizontal position Supplied with reverse jaw to insure grip increase as load is applied ong beams should be lifted using 2 clamps attached to opposite beam flanges E 30º 30º F Model Working oad (per pair) Min Max Plate imensions E F (per 104 lb. lb. in. in. in. in. in. in. in. lb. THKO ,600 0 to THK ,300 0 to 1-3/ THK4.5* 500 9,900 0 to 1-3/ THK6.0* ,200 0 to 2-3/ THK9 1,000 19,800 0 to 2-3/ *Not Stocked

105 amlok lamps HG an be used on hot rolled structural steel plates an be used to lift stainless steel plates or plates with harden surfaces due to cold rolling ift plates from horizontal to vertical positions and vice versa through 180º lamp has serrated teeth and will mark plate F G E Model Working oad Min Max Jaw apacity imensions E F G lb. lb. in. in. in. in. in. in. in. lb. HG ,100 0 to 3/ HG ,000 0 to 5// HG ,400 0 to 3/ HG3* 700 6,600 0 to 3/ HG4* 900 8,800 0 to 3/ *Not Stocked TP djustable to fit various flange widths Pre lubricated ball bearings on each unit Easily attaches Hoist, Pulleys and Slings G E H F J K elow the Hook Model Working oad Jaw apacity Min urve Radius Min Max Min Max imensions E F G H J K lb. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lb. TP1 2, //8 to 5-7/ TP2 4,400 3 to 7-7/ TP3 8,800 3 to 7-7/

106 amlok lamps Screwlok eam lamp with Shackles esigned to fit flanges of most structural beams ct as a semi-permanent lifting point for use with manual or electric hoists Shackle incorporated for load suspension E F Model Working oad Flange imensions E F lb. in. in. in. in. in. in. in. lb. S921 2,200 3 to 8-1/ S922 4,400 3 to 8-1/ S923 6,600 4 to 10-5/ S923/ 6,600 3 to S925 11,000 4 to 10-5/ S925/ 11,000 3 to S ,000 3 to S Series Twin eam lamp Enables one beam to be suspended beneath another Quickly and easily attaches to both beams Supplied fixed at parallel, at 90 degrees to each other or with swivel that allows 360 degree rotation Used for supporting vertical loads only Model Working oad Minimum Flange Width Maximum 106 lb. in. in. lb. S922T 4, S923T 6, S923/T 6, S925/T 11, S925/T* 11, *Not Stocked

107 amlok lamps THS Spring lever for locking into place an be used in single or 2 leg slings Use lifting beams for longer plates o not use with endless or 3 or 4 leg slings o not exceed 60º angle when lifting o not lift plates with a temperature of 120º (250ºF) or higher o not use to lift stainless steel, lead or copper H E G F Model Working oad Jaw apacity Min Max imensions E F G H lb. in. in. in. in. in. in. in. in. in. lb. THS ,600 0 to 3/ THS ,300 0 to 1-3/ THS ,900 0 to 1-3/ TSH Offer the best means of holding and securing loads - great for positioning High force screw threads Hardened steel jaws Swivel jaws increases grip if plate moves Not recommended for lifting applications E G H elow the Hook F Model Working oad Jaw apacity imensions E F G H lb. in. in. in. in. in. in. in. in. in. lb. TSH1.5 3,300 0 to 1-1/ TSH3 6,600 0 to TSH5 11,000 0 to 3-1/

108 amlok lamps TG Solid construction design Sold in sets of 3 Simple handling arge jaw capacity ight weight design Service friendly Model Working oad (Per set of 3) Jaw apacity (Z) imensions E (Mouth) F (Pressure ine) Imperial lb. in. in. in. in. in. in. in. lb. TG1500/3 3, /2 to 4-3/ TG3000/3 6,600 2 to TG3000/3 6, /2 to 8-5/ ontainer ifting ugs Spring loaded bolt to prevent accidental release Mounted at the side of the container in either upper or lower holes Easy installation and removal esigned to eliminate the dangerous use of standard hooks E G 20 F Model Working oad (Per set of 4) imensions E F G Imperial 40 lb. in. in. in. in. in. in. in. lb. 88,

109 HG G dditional lever in clamping mechanism provides a very high gripping force an be used to lift plate from horizontal to vertical position and vice versa H F = Thickness Model Working oad Plate imensions E F G H Imperial lb. in. in. in. in. in. in. in. in. in. lb. HG to 3/ ! WRNING! Improper installation and use of clamps can cause injury If not properly installed, operated and maintained, the use of all mechanical equipment presents the possibility of personal injury or property damage. efore using lifting clamps, become familiar with applicable installation, operation and maintenance requirements. lamps should be used only by authorized, properly trained operators. To avoid injury: Inspect clamps and equipment before use. o not use if components are bent, elongated, gouged, nicked excessively, worn, or damaged. Make sure that nut, bolts, pins and other fasteners are tightened and secure. Make sure clamps are functional and will grip the load. o not exceed the clamps rated load or working load limit of other lifting equipment components. ift only one plate at a time when using lifting clamps. o not lift unbalanced loads. void sudden jerks when applying the load. Rapid load application can produce overloading. Use clamps and lifting equipment only if authorized and properly trained. lways stand clear when lifting and lowering. Use more than one clamp suspended from a lifting beam when lifting long loads. lways gently lift and lower. elow the Hook 109

110 ady ifters ady ifters ady ifters represents a complete line of below the hook attachments for efficiently handling goods in industrial, construction, and related environments. The ady team of welders conform to the Structural Welding ode of the merican Welding Society, thus ensuring the consistency of the products manufactured. ll products conform to the requirements of NSI/SME for elow-the-hook ifting evices. In addition to the standard products shown here, custom solutions exist to satisfy the most challenging lifts. s such as tongs, scissors, and grabs may be tailored to the exact application. rane Forks rane forks are ideal for handling palletized loads in areas such as loading docks, crowded or unpaved storage areas, and railroad yards. They are also used frequently to load barges, gondolas, and open top trucks. ll ady crane forks are counter balanced to hang level when empty and to increase the rate of handling. ounterweight balances the lifter structure only, not the load. The load is centered under the lifting bail for a level lift. 110 apacity 1 to 20 tons

111 -Hooks -Hooks are available in a variety of styles. ompact -Hooks are rugged, yet lightweight for easy handling. The polished, large radius inside corners of the compact -Hooks minimize stress concentration in these critical areas. These inside corners are positioned to avoid contact with coil edges, thus reducing coil damage. dditionally, the curved saddle on the lower arm reduces wear on the coil. In addition to the popular ompact -Hooks, the following are part of the ady ifters line: lose Stacking -Hooks contains a short upper arm that permits handling a large range of coil sizes flush against a vertical surface. This arm also allows the user to handle all coils in a range without interfering with adjacent coils during movement. Ship oaders esigned for use with slings to handle two coils simultaneously. Hooks are easily separated for insertion into coils. apacity 5 to 50 tons Spreader eams ifting beams and spreaders are available in a wide range of capacities and styles. eams are available in fixed or adjustable styles and may also be designed with special hook or shackle configurations. ow headroom beams are offered with either fixed or movable hooks, and can also be developed for three-point lifts. elow the Hook!! WRNING Inspect lifter, moving lifter parts and operating controls for proper operation before each use. Never use malfunctioning or damaged lifter, or one tagged Out of Service. o not exceed rated load of lifter and crane. Make sure load is balanced and stable. void shock loads due to sudden starts and stops. Make sure lifting ropes and chains are not twisted or kinked. o not lift people. Make sure operator and others are clear of load at all times. Make sure load clears objects during moving. 111

112 G safety chain ircraft assembly Index X Heavy-uty hinged universal plate clamp Y hinged universal plate clamp Z universal plate clamp inder law hook load binder E-Z Pro cam release lever binder ever type load binder Ratchet type load binder Removable handle load binder Specialty forged lever load binder Tightener load binder TG uoy chain ady lifters hook rane fork Spreader beam amlok clamps TG G Girder Turning lamp H Heavy duty horizontal plate clamp ontainer ifting lamps P Pile pinching clamp TP X Heavy-uty hinged universal plate clamp Y Hinged universal plate clamp Z Universal plate clamp HG HG Hand grip J Gentle grip clamp Screwlok beam clamp with shackle S Twin eam lamp THK Horizontal THS TSH TTG Horizontal girder clamp TTR Girder clamp arbon chain and attachments are, Use & Inspection (Herc-lloy 800) are, Use & Inspection (Herc-lloy 1000) G Girder Turning lamp H heavy duty horizontal plate clamp hain (G30) hain (G43) hain (G70) hain (Herc-lloy 800) hain (Herc-lloy 1000) hain comparison chart hain shortener (Herc-lloy 1000) law cross chain ontainer ifting lamp levis assembly (G43) levis assembly (G70) luster assemblies G, T, R, S G, T, S G & R oil chain straight link radle grab hook (Herc-lloy 1000) omponents chart (Herc-lloy 800) omponents chart (Herc-lloy 1000) P pile pinching clamp TP NV master sub assembly NV shackles rive sprocket F Foundry hook (Herc-lloy 800) Foundry hook (Herc-lloy 1000) G Grab hook (G30) Grab hook (G43) Grab hook (G70) Grab hook (Herc-lloy 800) Grab link Grade hain levis grab hook levis slip hook Eye grab hook Eye slip hook Hanger chain Grade hain levis assembly levis grab hook - zinc levis slip hook - zinc Eye grab hook - zinc Eye slip hook - zinc Eye slip hook with latch - zinc Hanger chain Welded assembly Grade G safety chain ircraft assembly hain levis assembly levis grab hook levis slip hook Eye grab hook Eye slip hook G, T, R, S - cluster G, T, S - cluster G & R - cluster J Hook J Hook (Recovery ssembly) Mini J hook R hook Rivet assembly T hook Welded assembly H Hammerlok (Herc-lloy 800) Hammerlok (Herc-lloy 1000) Hanger chain (G30) Hanger chain (G43) Heavy duty tiedowns (Herc-lloy 1000 & 800) levis style levlok style Ratchet inders Herc-lloy are, Use & Inspection

113 hain hain shortener levlok cradle grab hook levlok Foundry hook levlok sling hook omponent chart Eye cradle grab hook Eye Foundry hook Eye sling hook Hammerlok atchlok 100 earing swivel style hook atchlok 100 ushing swivel style hook atchlok 100 levlok style hook atchlok 100 Eye style hook atchlok 100 reference chart Master link Pear shaped master link Rigging hook Slings Subassembly Herc-lloy are, Use & Inspection hain levlok cradle grab hook levlok grab hook levlok sling hook omponents chart Eye cradle grab hook Eye foundry hook Eye sling hook Flat bottom master link Forged master link Grab link Hammerlok Heavy duty tiedowns Master link Master link with flats Master ring Omegalok connector Plate hook S hook Sling Sorting hook Sorting hook with handle Subassembly Subassembly with flats HG hand grip Hoist ring Heavy duty hoist ring Hoist ring metric Hoist ring swivel Specialty engineered hoist ring J J Hook J Hook - Recovery ssembly atchlok 100 Hooks atchlok 100 earing swivel style hook atchlok 100 ushing swivel style hook atchlok 100 levlok style hook atchlok 100 Eye style hook ever binder - E-Z Pro cam release iner bolts J gentle grip clamp oad binder - claw hook oad binder - forged lever oad binder - lever type oad binder - removable handle ong reach shackle ong wall mining chain M Machine chain Master link (Herc-lloy 800) Master link (Herc-lloy 1000) Master ring Mid-Grip clips - double saddle Mini J hook O Omegalok connector Overhead ifting P Padless shackle connector Pear shaped master link (Herc-lloy 1000) Piggyback wedge socket clips Plate hook (Herc-lloy 800) R R hook Ratchet type load binder Rigging hook Rigging hook (Herc-lloy 1000) Rivet assembly (G70) S S hook (Herc-lloy 800) Sash chain S Twin eam lamp Screwlok beam clamp with shackle Shackles Shackles - arbon anchor Shackles - arbon chain Shackles - lloy anchor Shackles - lloy chain Shackles - Rated anchor Shackles - Rated chain Shank Hook Shoulder eyebolts Side chain Sling (Herc-lloy 800) Sling (Herc-lloy 1000) Sling hook (Herc-lloy 800) Sling hook (Herc-lloy 1000) Slip hook (G30) Slip hook (G43) Slip hook (G70) Sorting hook (Herc-lloy 800) Specialty chain uoy chain law cross chain oil chain straight link ross chain hook iner bolts ong wall mining chain Machine chain straight link Padless shackle connector Sash chain Side chain Special chain connector Winch line / tail chain (Herc-lloy 800)

114 Special chain connector Specialty hooks (Herc-lloy 800) Stainless Steel hain Stainless Steel Master link Subassembly (Herc-lloy 800) Subassembly (Herc-lloy 1000) Swage buttons Swage sleeve for flemish eye Swage sockets - closed Swage socket - open Swivel rigging hook T T hook Thimbles THK horizontal THS lamp Tightener load binder Transport chain - binding Trawling shackle TSH lamp TTG horizontal girder clamp TTR Girder lamp Turnbuckels Eye & Eye Eye & Jaw Jaw & Jaw Hook & Eye Hook & Hook W Warnings Web sling shackle Welded assembly (G43) Welded assembly (G70) Winch line / tail chain Wire rope attachments Mid-Grip clips - double saddle Piggyback wedge socket clips Swage buttons Swage sleeve for flemish eye Swage sockets - closed Swage socket - open Thimbles Wire rope clips Wire rope clips

115 Notes 115

116 olumbus McKinnon provides the most extensive product line in the industry and offers technical expertise to assist workers in industries around the world. From powered hoists to jib cranes to below-the-hook attachments, look for the only company that is a single source for all items. For 135 years, olumbus McKinnon has meant durability and reliability for generations of users. ook for one of the many popular brands when sourcing your material handling products at: Phone: (800) or (716) Fax: (716) MRP-5 Made in US SS 5M 9/ olumbus McKinnon orporation