ENTERTAINMENT RIGGING PRODUCTS

Transcription

1 Schedule # () s effective March 19, 2012 s subject to change without notice. ll prices are F.O.. origin. PRIE & SPEIFITION OOK ENTERTINMENT RIGGING PRODUTS Phone (716) (800) Fax (716) olumbus McKinnon orporation. ll Rights Reserved.

2 TLE OF ONTENTS HIN Grade 30 Proof oil hain Grade 70 inding hain Herc-lloy 800 hain Serial Tag and Split Rings Special Theatrical lloy hain ELETRI HIN HOIST PRODUTS Hoist hain Wear Gauges... 8 Motor Up Lodestar and ccessories... 6 Prostar and ccessories... 7 Railstar Motor Driven Trolley... 8 Tractor and ccessories... 8 ShowPro and ccessories... 7 Theatrical Lodestar and ccessories HER-LLOY 800 LINKS & SLINGS djust-a-link Slings lloy Master Link Sub-ssemblies lloy Master Links w /Engineered Flats Hammerlok oupling Links Omega-Lok oupling Links Oblong Master Links Forged Oblong Master Links Welded HOIST RINGS Heavy Duty Hoist Ring Hoist Ring - Metric HOOKS lloy and arbon Steel Swivel Hooks Latchlok Hooks Replacement Latch Kits Rigging Hooks Sling Hooks LOD INDERS Forged Lever inders Removable Handle Ratchet inders Ratchet Type inders MNUL HIN HOIST PRODUTS GT Series Grip & Pull Wire Rope Lever Tool... 7 Hurricane Hand hain Hoist Series 653 Lever Operated Hoists... 9 Series 602 Lever Hoist and ccessories Series 603 Lever Hoist and ccessories Series 622 Hand hain Hoists Shipyard Hooks for Series Wire Rope Lever Hoists MNUL TROLLEYS & EM LMPS eam lamps T Trolley Series 84 Trolleys Series 84 Trolleys (Wide Flange eams) Series 632 Plain all earing Trolleys Series 633 Plain all earing Trolleys RIGGING ESSORIES levis Links Forged Wire Rope lips Malleable Wire Rope lip Mid-Grip lips Piggy-ack Wedge Socket lips Quick Links Repair Links Shoulder Eyebolts Turnbuckles Wire Rope lips... 15, 27 Wire Rope lips for Scaffolding SHKLES nchor Shackles with Screw Pin (lloy) nchor shackles with Screw Pin (arbon) Long Reach Shackles Theatrical Shackles TERMS ND POLIIES The following are trademarks of olumbus McKinnon orporation registered in U.S. Patent and Trademark Office: M, yclone, Rigger, Lodestar, Valustar, Powerstar, RailStar, ShopStar, irstar, Latchlok, Series 632, Series 633. The following are trademarks of olumbus McKinnon orporation: Protector, Shopir, LodeRail, Hurricane. ll prices are in US Funds. s subject to change without notice. 2

3 DEFINITIONS ND WRNINGS NOTES: olumbus McKinnon orporation assumes no responsibility for the use or misapplication of any of its products. s are provided with the express understanding that the purchaser and/or user are thoroughly familiar with the correct application and proper use. The following warnings and definitions are provided as an aid to understanding. DEFINITIONS: Refers to the maximum load (rated capacity) in pounds that shall be applied in direct tension to a straight length of chain or attachment. The working load limit shall not be exceeded Proof Test (or Manufacturing Test Force) Refers to a load in pounds which an attachment or chain (or both) has withstood during a test in which an increasing tension is applied to an attachment or straight length of chain. This is typically accomplished as part of the manufacturing or testing process. Minimum reak Load Refers to a load in pounds as applied to an attachment or chain at the time it left the factory that has been found by representative testing to break the item under test of increasing force as applied by a standard testing machine. This is a manufacturing test and such data is not intended for service or design purposes. WRNING Never exceed the working load limit of chain or attachments, even when the item is new and the load is uniformly applied. efore use, always inspect chain and attachments for kinking, twisting, knotting, and visible defects such as distortion or damage. Do not jerk load. pply a slow, steady pull. Protect items from corrosion. ny product will break if abused or over-used. Use only alloy chain and attachments (Grade 80) for overhead lifting purposes, never any other chain. The terms working load limit proof test and minimum break load contain no implication of what load an attachment or chain will withstand, if any, if the factors noted in the Definitions are changed. The working load limit should not be exceeded, even when an attachment or chain is new and the load is uniformly applied. The manufacturer does not accept any liability for damages which result from an attachment or chain being used in excess of the working load limit. ny changes in these factors could lessen the load the chain will hold. For examples: cceleration in the rate of application, which could cause dangerous overloading. Variation in the angle of the load. s the angle or inclination decreases, the working load capacity will decrease accordingly. Twisting, knotting and kinking. purpose other than that for which the chain was intended. Where attachments such as hooks or rings are desired for use with chain in sustaining loads, care should be taken to select attachments of the type, grade and size recommended for use with corresponding chain with which such attachments are used. ll prices are in US Funds. s subject to change without notice. 3

4 M GENERL INFORMTION The use of rigging accessories presents risk of personal injury and property damage. This risk is greatly increased if proper rigging procedures and warning information are not adhered to. s of these accessories are advised to consult a rigging handbook or contact a qualified person for specific application information if the application differs from those discussed in the following guidelines. Shoulder Eyebolts Do not exceed the working load limit reduce the working load limit according to the adjacent table if loading over than true vertical. Inspect eyebolts before use. Do not use if bent more than 15 or if wear of more than 10% of original dimension is evident. Install with shoulder at 90 to axis of hole to assure total contact of shoulder. Torque nut/eyebolt to assure proper seating. heck seating after initial loading. If installing in tapped hole, make sure depth of thread engagement is at least 1-1/2 times bolt diameter. Thread fit must also be good-tight, not loose-sloppy. Where eyebolts must be aligned, a washer or shim may be placed under the shoulder to permit alignment when tightened. To minimize the bending moment, always apply load in the direction of the plane of the eye. Reduce working load limit according to table if loaded other than true vertical. Never insert a hook tip in an eyebolt; always use a shackle to connect eyebolt to load. Do not use a sling reeved through an eyebolt or a pair of eyebolts. ttach each single sling leg to an eyebolt using a shackle. Turnbuckles Do not exceed the working load limit. Inspect turnbuckles before use for bent components and worn threads. Do not use if body or end fitting is bent more than 10 from axial center link. Do not use if threads are visibly worn or feel loose. pply turnbuckle in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks. pply load to center of end attachment eyes and bowl of hooks. Do not tip load hooks or side load eyes. If in doubt, consult a rigging handbook or discuss with a qualified person. Refer also to M hain and Forged s atalog IP-10 and M Lifting, Pulling and inding s Manual PM-10 and EPD-10. Shackles Do not exceed the working load limit refer to catalog page for working load limit data for shackle size being used. Inspect before use for wear in bow and pin. Remove from service if wear exceeds 10% of original stock diameter. Never use a shackle that is deformed open or closed. Measure distance between eyes and compare to catalog page dimension. Never replace a shackle pin with other than the original manufacturer s pin. Shackle pins are special heat treated material. lways apply the load straight through center line of pin and bow. If necessary, add spacers (washers) to each side of pin to keep load centered. efore applying load, make sure pins are seated torque tight. lso, make sure cotter pins are in place to prevent loosening of pin. Do not use a screw pin shackle if the pin can roll under the load and unscrew itself. If in doubt, consult a rigging handbook or discuss with a qualified person. Shoulder Eyebolts ngle of Loading True Vertical less than 45 Full (refer to full catalog page) 55% of Full 35% of Full If in doubt, consult a rigging handbook or discuss with a qualified person. Hooks (Refer also to NSI/SME 30.10) 25% of Full Do Not Use Do not exceed the working load limit. Inspect before use for wear, distortion, cracks, nicks and gouges. Wear must not exceed 10% of original section dimensions; bends and twists must not exceed 10 from plane of unbent hook, throat opening must not show an increase of 15%. Hooks which display any significant findings must be immediately removed from service. Do not shock load. Do not tip load apply load only to center of base (bowl/saddle) of hook. Do not place a side load or back load on the hook the only stress applied to the hook should be that of the load itself. Use a hook latch unless impractical do not apply load to hook latch. Latch is to assist hookup and retain items under slack conditions only. Shank hooks are supplied unthreaded. Insufficient thread engagement can result in loss of load. The following must be observed: 1) Shanks are not intended for internal threading or swaging. 2) To obtain maximum strength threads to be class 1 or 2. 3) Thread engagement in nut or object must be a minimum of 1-1/2 times the thread diameter. If in doubt, consult a rigging handbook or discuss with a qualified person. lamps (Refer also to NSI/SME 30.20) If not properly installed, operated, and maintained, the use of all mechanical equipment presents the possibility of personal injury or property damage. efore using lifting clamps, become familiar with applicable installation, operation and maintenance requirements. lamps should be used only by authorized, properly trained operators. Observing the following general precautions will guard against damage and injury: Inspect clamps and equipment before use. Do not use if components are bent, elongated, gouged, nicked excessively, worn, or damaged. Make sure that nuts, bolts, pins and other fasteners are tightened and secure. Make sure clamps are functional and will grip the load. Do not exceed the clamp s rated load or working load limit of other lifting equipment components. Do not move unbalanced load. void sudden jerks when applying the load. Rapid load application can produce overloading. Use clamps and lifting equipment only if authorized and properly trained. WRNING IMPROPER USE OF RIGGING ESSORIES MY RESULT IN PERSONL INJURY TO VOID INJURY: DO NOT EXEED WORKING LOD LIMIT INSPET ESSORIES EFORE USE PPLY ESSORIES S INSTRUTED HEREIN ll prices are in US Funds. s subject to change without notice. 4

5 ELETRI HIN HOIST PRODUTS NEW LODESTR M Theatrical Lodestar Electric hain Hoist & ccessories Flat lack Powder-oat Finish Model Maximum Hoist Lifting Speed (FPM) Less hain 10 Foot Lift* 60 Foot Lift Wt. 115V 230/460V 115V 230/460V 115V 230/460V 115V 230/460V 1/ NH 3169NH 2, NHF 3169NHF 2, NHF 3169NHF 3, / NH 3201NH 2, NHF 3201NHF 2, NHF 3201NHF 3, F 1/ NH 2868NH 2, NHF 2868NHF 2, NHF 2868NHF 3, J 1/ NH 3482NH 2, NHF 3482NHF 3, NHF 3482NHF 4, JJ 1/ all for - - all for - - all for L NH 3610NH 2, NHF 3610NHF 3, NHF 3610NHF 4, LL all for - - all for - - all for R NH 4239NH 3, NHF 4239NHF 3, NHF 4239NHF 5, RR NH 4, NHF 4, NHF 6, NOTE: ll Theatrical hoists are shipped less control station and suspension unless otherwise specified. Furnished with 2 1/2 ft. power cord and 2 1/2 ft. control cord. If station is required specify code and add $ to list price. s with F suffix include swivel hook suspension as standard. * Use this column and add per foot of lift beyond 10 ft. Double rake Description Small Frame dd $ Large Frame dd $ Installed on Hoist at Factory Field Retrofit Kits to onvert Single D rake to Double rake Hoist Model Voltage K --F 205/230/460 $ K J-L-R 205/230/460 $ K JJ-LL-RR 205/230/460 $ Lodestar Suspensions Flat lack Powder-oat Finish Rigid Hook Swivel Hook Rigid Latchlok Swivel Latchlok Models Wt. 2788NH -F 3 $ NH J-LL 5 $ NH R-RR 8 $ NH -F 4 $ NH J-LL 4 $ NH R-RR 8 $ NH -F 2 $ NH J-LL 2 $ ENH R-RR 10 $ NH -F 2 $ NH J-LL 2 $ NH R-RR 10 $ Lodestar Load hain (Star Grade) Zinc Plated Rate 1/8, 1/2 1/2, 1 1/8, 1/2 1/2, 1 1/8, 1/2 1/2, 1 Hoist Model,,,, F E, H,,,, F E, H,,,, F E, H hain Drum Finish hain per Ft. Lodestar Modification harges egin with standard 10 Lift and add extra charges Voltage or 230/ Lodestar Extras Models Extra hain per ft. of Lift ----F $14.75 E-H $29.50 J-L-JJ-LL $19.30 R-RR $38.60 RT-RRT $57.90 Extra ontrol ord per ft. $6.00 Description Weatherproofing (Hoist Only) N/ cid Protection (Hoist Only) N/ Power ord Strain Relief $50.20 Extra Power ord (Standard : 2 1/2 ft.) $6.00/foot Extra ontrol ord (Standard : 2 1/2 ft.) $6.00/foot cid Protection Low Headroom Trolley N/ Thermal Switch (Klixon) in Hoist Motor N/ Rotatable Switch Kit For Field Retrofit Models Wt H 1/2 $ J-RRT 1/2 $38.97 Finish* hain per Ft. per Drum Wt. Drum Zinc Zinc $ / $3, Zinc Zinc $ / $7, Zinc Zinc $ / $14, /2-3 J, JJ, L, LL, R, RR, RT, RRT Zinc Zinc $ / $3, /2-3 J, JJ, L, LL, R, RR, RT, RRT Zinc Zinc $ / $9, /2-3 J, JJ, L, LL, R, RR, RT, RRT Zinc Zinc $ / $19, ll prices are in US Funds. s subject to change without notice. 5

6 ELETRI HIN HOIST PRODUTS NEW LODESTR Lodestar Direct ontrol Hoists Model Maximum Hoist Lifting Speed (FPM) Wt. 230/460V Less hain / Less Suspension** 10 Foot Lift* 60 Foot Lift 230/460V 230/460V 230/460V 1/ NH $1, NHF $1, NHF $2, / NH $1, NHF $2, NHF $2, F 1/ NH $1, NHF $2, NHF $2, J 1/ NH $2, NHF $2, NHF $3, JJ 1/ all for - all for - all for L NH $2, NHF $2, NHF $3, LL NH $3, NHF $3, NHF $4, R all for - all for - all for RR NH $3, NHF $4, NHF $5, NOTE: Note: ll hoists are shipped with a 2-1/2 ft. power cord. For other capacities and speeds call the factory for pricing and availability. ll NHF units have the suspension added. * Use this column and add per foot of lift beyond 10ft. ** To add suspension to the less chain unit, add the suspension price and F to the model number Maximum Lifts with Switch Hook Travel with 44TPI Shaft (Standard) Hook Travel with 56TPI Shaft Hook Travel with 64TPI Shaft, -2,, , , -2, F, FF E, E-2, H, H J, J-2, L, L JJ, JJ L. LL R, R RR, RR RT, RT RRT, RRT Extra harge for Lodestar Equipped with Latchlok Hooks Upper Lower Models Shiping 1050,,,, F 2 $ E & H 2 $ J, JJ, L & LL 2 $ R & RR 10 $ RT & RRT 6 $ ,,,, & F 2 $ E & H 2 $ J, JJ, L & LL 2 $ R * RR 4 $ RT & RRT 6 $ Maximum Model M Low Headroom Trolley (Series 635)* /8 to 1 thru LL 23 $ R thru RR 52 $ RT thru RRT 80 $ * Rigid Lug Suspension required for attaching to Hoist. s apply to standard flange adjustments. pply for prices on other than standard. Lodestar Motor Driven Trolley (Series 635)* 75 FPM & 30 FPM Power Wt. Supply 75 FPM 30 FPM 75 FPM 30 FPM /8 to $3, /8 to $3, /8 to $3, $3, $3, $3, * Rigid Lug Suspension required for attaching to Hoist. s apply to standard flange adjustments. pply for prices on other than standard. pply for other speed prices. Std. P.. Drop is 16-3 on MDT Lodestar hain ontainers omplete (Motor Up) + ucket Ship. Wt. Models,,, & F Maximum of Lift Models Models Models E & H J, JJ, L R & RR Models RT & RRT & LL 2450NH $ NH $ NH $ NH $ NH $ NH $ NH $ NH $ NH * $ NH $ NH $ NH $ NH $ NH $ For lifts greater than listed (special) pply. + dvise if bucket length causes headroom problems - larger diameter shorter length buckets available. * E & H limit switch maximum is 60 ft. Lodestar Motor Driven Trolley Extras Description Power ord (standard 2-6 ) price per ft of extra length $6.00 ontrol ord (standard 16-3 ) price per ft for extra drop $6.00 Trolley rake - on new units add $ Eye Type Suspension dapter (2 ton max.) Hook Suspension Hoists add ( 36653) $ Weatherproofing (MDT Only) $79.80 cid Protection (MDT Only) N/ Two Speed ontrol MDT (3 Phase only) $1, Thermal Switch (Klixon) in Trolley Motor $ Step Infinitely Variable Frequency ontrol $1, Step Pushbuttons (per pair) $ When ordering, specify code number(s), model, capacity, beam size, power supply, suspension, lift, extra control cord or power cord (if required) and type of electrification (if required). ll prices are in US Funds. s subject to change without notice. 6

7 ELETRI HIN HOIST PRODUTS M Prostar Electric hain Hoist Flat lack Powder-oat Finish Single Phase with ontactor Rated Number of hains Lifting Speed (FPM) 60' Lift with Hook Suspension and 60' Lift 10' Lift with Hook Suspension and 10' Lift Less hain with Hook Suspension Less hain 2049F 2041F $1, $1, $1, F $2, $1, $1, F 2044F $2, $1, $1, Three Phase - 50 Hertz Voltages run at 5/6 of Standard Speed 208/ / / / Rated Number of hains NOTE: ll Theatrical Hoists are shipped less ontrol Station and Suspension unless otherwise specified. Furnished with 2-1/2 ft. Power ord and 2-1/2 ft. ontrol ord. If Station is required, specify code and add $ to list price. Extra P ord $6.00/ft. - furnished with 2-1/2 cord Extra hain per foot lift $11.20 for single chained, $22.40 for double chained. Extra Power ord (standard length 2-1/2 ft.) $6.00/ft. Zinc plated Load hain per ft. lift $12.85 for single chained, $25.70 for double chained. * For Special Lifts (other than 60 ) egin with 10 lift price and add appropriate extra prices. Lifting Speed (FPM) 60' Lift with Hook Suspension and 60' Lift 10' Lift with Hook Suspension and 10' Lift Less hain with Hook Suspension Less hain 2042F 2043F $1, $1, $1, F 2128F $2, $1, $1, F 2046F $2, $1, $1, F 2130F $3, $1, $1, Double Reeving Kit Lower Hook lock ssembly and Hardware required to convert 300 lb./500 lb. Single Reeved Hoist to 600 lb./1000 lb. Double Reeved $96.00 M Prostar hain ontainers Max. of Lift Single Reeved Double Reeved $ $ $ $ $ $ * For longer lift containers consult factory. M Prostar Load hain (Stargrade) Drum hain Finish Ft. per Drum urnished 250 $2, urnished 500 $5, urnished 1000 $11, M ShowPro Direct ontrol Rigging Hoists (Electric hain) * Rated Number of hains Maximum Lift Lifting Speed (FPM) Motor HP Motor** Voltage / Phase / Hertz mps mps Ship Unit 60 ft. hain Net Unit 60 ft. hain 60 ft. Lift Unit SP1003 1/ /2 230/3/ /3/ $1, SP /3/ /3/ $1, SP /3/ /3/ $2, *Standard Lift 60 feet; not sold less chain Extra chain per ft. Lift: $16.80 single chain units, $33.60 double chain units; single pigtail with IE connector. ** ll motor are dual voltage. Motors will operate on 50 Hertz power, but will only run 5/6 nominal speed. Specify Voltages - 208, 380, 415 (50 or 60 Hertz). For special lift in excess of 120 ft. or 60 ft., consult factory. 4-Way ontroller ontrol ords and onnectors Description 08843W ++ M-4 Way ontroller Station $1, W ontroller ord 50 ft. ssembly $ SP851 1 EE (IE) Plug (male) $78.00 SP851 2 EE (IE) onnector (female) $25.30 SP851 3 EE (IE) Panel Mount (female) $ Specify voltage when ordering. M ShowPro hain ontainers Maximum hain 1/2 ton 1 ton 2 ton UJ $ UJ $ ll prices are in US Funds. s subject to change without notice. 7

8 ELETRI HIN HOIST PRODUTS M RailStar Motor Driven Trolley Maximum Travel Speed (FPM) Power Supply Std. eam Height Std. Flange Width Wt /8 to / / $2, /8 to / $2, / $2, $2, Universal hook plate and 4 button single speed control station included. Standard P.. drop is 16 ft. Standard power cord length is 4 ft. Imported. Tractors & ccessories * Single Unit for Monorail Hoists apacities to 5 tons Maximum Speed 2,000 3,000 5,000 6, TD-235 $2, TD-255 $2, TD-270 $2, TD-2105 $2, TD-335 $2, TD-355 $2, TD-370 $2, TD-3105 $2, TD-535 $2, TD-555 $2, TD-570 $2, TD-635 $2, TD-655 $2, , TD-1035 $2, Standard unit is adjustable for standard I-eams and Flat Flange eams from 3.38 to 8 wide. Tractors to operate on urved eams (36 minimum radius or larger) require Flangeless Wheels and Guide Rollers. dd $ to list price. Standard Pricing includes Transformer, ontrol Fuse, 2-utton Pushbutton Station, 10 ft. Drop able and Strain Relief hain. NOTE: Specify Required Voltage, Phase, Frequency and eam when ordering. s are for Three Phase Only. For Single Phase, see Options & ccessories. NOT S PPROVED Tractor Options & ccessories Description Motor rake $ V ontrols (in lieu of Standard 115V) $ Mainline ontractor (does not include button) $ Motor Fuses, Holder, Enclosure $ utton Push ssembly $ utton Push ssembly $ utton Push ssembly $ Extra Pushbutton able (includes strain relief) (price per foot) $5.20 Delete 2-utton Pendant Station, deduct -$74.00 Twin Unit for Underhung ridges* $4, NEM 4 Panel $ Single Phase $ Speed dder (not on 35 FPM) $ Patented Track (straight track only) $ " Tow ar $ Unit for 575V-3PH-60HZ Power $ For options or accessories not listed, consult factory for pricing and availability. *When ordering, add 'T' in front of single unit catalog number Example: TTD-235 ll prices are in US Funds. s subject to change without notice. 8

9 MNUL HIN HOIST PRODUTS Series 653 Lever Operated Hoists Maximum Standard Lift Wt / $ / $ / $ / $ $ / $ / $ / $ / $ $ $ $ $ $1, $1, $1, For additional lifts, begin with 5 ft. lift and add additional charges. Extra per foot lift Imported Shipyard Hooks for Series 653 Maximum Load (lbs) Wt. Upper Shipyard Hook 3315WLP $ WPL $ Lower Shipyard Hook 3414WLP $ WLP $ Series 653 with Shipyard Hooks Maximum Standard Lift Wt. 5336* 1-1/ $ * 1-1/ $ * $ * $ * ontains Lower Shipyard Hook only. ** ontains Lower and Upper Shipyard Hooks vailable in Standard Lift Only 3/4-1 ton 1-1/2-2 ton 3 ton 6 ton $7.65 $9.30 $15.60 $18.60 Series 653 Lever Operated Hoists Maximum Wt /4 15 $ /2 20 $ $ Series 653 Lever Operated Hoists Model Maximum Standard Wire Rope * Wire Rope Wt GT /16 35 $ GT /16 79 $1, GT /8 94 $1, * Wire rope lengths other than indicated, are not available. ll prices are in US Funds. s subject to change without notice. 9

10 MNUL HIN HOIST PRODUTS Wire Rope Lever Hoists Rated Single Line Lift Minimum Headroom Rated Double Line Lift Minimum Headroom able 04601W 1/ N/ N/ N/ 3/16 11 $ W 1/ / $ W 3/ N/ N/ N/ 1/4 11-1/2 $ W 3/ / /4 14 $ W 3/ / /4 15-1/4 $ W 3/ /2 11-1/4 27 1/4 17 $ W /2 27 9/ /2 $ Mini Hoists Model Rated able Wt 0210 Series $ Series 602 with 10' Lift $ Series 602 arry ag 0.3 $ Series $ Series 603 with 10' Lift $ Series 603 arry ag 0.3 $20.00 Hurricane 360 Hand hain Hoists Maximum Standard Lift Hand & Load hain Extra Lift per Foot Load hain Only Hand hain Only / $ $16.50 $6.00 $ / $ $16.50 $6.00 $ / $ $16.50 $6.00 $ / $ $16.50 $6.00 $ $ $18.15 $7.65 $ $ $18.15 $7.65 $ $ $18.15 $7.65 $ $ $18.15 $7.65 $ $ $19.80 $9.30 $ $ $19.80 $9.30 $ $ $19.80 $9.30 $ $ $37.20 $15.60 $ $1, $37.20 $15.60 $ $1, $37.20 $15.60 $ $1, $41.70 $15.60 $ $1, $41.70 $15.60 $ $1, $41.70 $15.60 $ $2, $82.65 $24.05 $ $2, $82.65 $24.05 $ $3, $82.65 $24.05 $10.50 Standard Hand hain drop 2 ft. less than Lift. For additional Lifts, begin with 8 ft. and add extra charge. Hurricane 360 (Less hain) Maximum /2 15 $ $ $ $ $ $1, ll prices are in US Funds. s subject to change without notice. 10

11 MNUL HIN HOIST PRODUTS & EM LMPS Series 622 Hand hain Hoist Maximum Standard Lift / $ / $ / $ / $ $ $ $ $ $ $ $ $ $ $ $ $ $1, $1, Hand & Load hain Extra Lift per Foot Load hain Only Hand hain Only $12.00 $6.00 $6.00 $13.65 $7.65 $6.00 $21.60 $15.60 $6.00 $37.20 $31.20 $6.00 $37.20 $31.20 $6.00 Standard Hand hain drop 2 ft. less than Lift. For additional Lifts, begin with 10 ft. and add extra charge. Imported. Screwlok eam lamps Flange Load (lbs) S921 3 to 8-1/4 2, $ S922 3 to 8-1/4 4, $ S923 4 to 10-5/8 6, $ S923/L 3 to 12 6, $ S925 4 to 10-5/8 11, $ S925/L 3 to 12 11, $ S to 12 22, $ Yellow in color eam lamps Model Number Rated (ton) Flange Width W /2 $ W /2 $ W /4 $ W /4 $ W $ lack in color ll prices are in US Funds. s subject to change without notice. 11

12 M SHKLES Theatrical Shackles lack Phosphate Finish, 100% Proof Tested (lbs) / $ /8 4-1/ $ /4 6-1/ $37.55 Type nchor Shackles Screw Pin * indicates lack paint; P indicates Orange paint Type nchor Shackles Screw Pin * P indicates Orange paint Screw Pin nchor Shackles - arbon Steel (ton) Std. Pkg. Wgt. Ea. Galvanized Pkg. Piece Painted* Pkg. Piece 3/16 1/ M645G $6.33 $ /4 3/ M646G $6.63 $7.03 M646 $6.52 $6.91 5/ M647G $8.47 $8.98 M647 $8.14 $8.63 3/8 1-1/ M648G $8.93 $9.47 M648 $8.69 $9.21 1/ M650G $12.20 $12.93 M650 $12.08 $ /8 4-1/ M651G $22.59 $23.95 M651 $20.73 $ /4 6-1/ M652G $32.42 $34.37 M652 $29.81 $ /8 8-1/ M653G $44.74 $47.42 M653 $40.37 $ M654G $60.21 $63.82 M654 $53.13 $ /8 12 ulk 7.00 M655G - $87.81 M655P - $ /4 14 ulk 9.50 M656G - $ M656P - $ /8 17 ulk M666G - $ M666P - $ /2 20 ulk M657G - $ M657P - $ /8 24 ulk M685G - $ M685P - $ /4 30 ulk M677G - $ M677P - $ ulk M658G - $ M658P - $ Screw Pin nchor Shackles - lloy Steel (ton) Std. Pkg. Wgt. Ea. Galvanized Pkg. Piece Painted* Pkg. Piece 3/ M648G $12.35 $13.09 M648P $12.50 $ / M649G $14.85 $15.74 M649P $14.43 $ / M650G $18.37 $19.47 M650P $17.99 $ / M651G $26.94 $28.56 M651P $26.54 $ / M652G $38.64 $40.96 M652P $37.57 $ / M653G $50.41 $53.43 M653P $49.56 $ M654G $67.67 $71.73 M654P $65.78 $ /8 15 ulk 7.00 M655G - $96.78 M655P - $ /4 18 ulk 9.50 M656G - $ M656P - $ /8 21 ulk M666G - $ M666P - $ /2 25 ulk M657G - $ M657P - $ /8 29 ulk M685G - $ M685P - $ /4 34 ulk M677G - $ M677P - $ ulk M658G - $ M658P - $ Type Long Reach Shackles Load Wgt. Ea. Self olored Painted* Screw Pin * P indicates Orange paint 3/4 10, M7152 $60.42 M7152P $ , M7154 $75.51 M7154P $ /2 34, M7157 $ M7157P $ WRNING DO NOT EXEED WORKING LOD LIMIT USE ONLY LLOY HIN WITH OMPTILE OMPONENTS FOR OVERHED LIFTING. ll prices are in US Funds. s subject to change without notice. 12 EPL-0411 (rev )

13 HIN SET & SPEIL THETRIL LLOY HIN ulk Special Theatrical lloy hain Unit of Measure Wt Foot 1.87 $12.05 per foot D250 Drum (250) $3, per drum D500 Drum (500) $6, per drum 0.950" 3.735" 0.512" Special Theatrical lloy hain $ $ $ $ $ $ $ $ $ $ $ $ $ Serial Tag and Split Rings Description Tag Phosphate $ Split Ring Z/P $ Split Ring Phosphate $1.60 HER-LLOY 800 HIN - PROOF TESTED Permanent Identification: Herc-lloy 800 chains have embossed marks, H 800 for grade plus a M trace code, appearing alternately. M Herc-lloy 800 hain (Grade 80) hain (mm) Nominal hain Dimensions Per Foot Per Drum No of Links per Foot Per Foot Per Drum 7/ , $ $3, /32 7 3, $ $2, /16 8 4, $ /8 10 7, $ $2, / , $ $2, / , $ $2, / , $ $2, / , $ $3, , $ $5, / , $ $11, ll prices are in US Funds. s subject to change without notice. 13 EPL-0411 (rev )

14 RIGGING ESSORIES Eye & Eye (EE) Hook & Hook (HH) Hook & Eye (HE) Jaw & Eye (JE) Jaw & Jaw (JJ) Turnbuckles Thread Take Up Imported Hot Dip Galvanized Turnbuckle Locknuts available Eye & Eye (EE) Hook & Hook* (HH) Hook & Eye* (HE) Jaw & Eye (JE) Jaw & Jaw (JJ) ach 1/ EE $ HH $ HE $ JE $ JJ $ /16 4-1/ EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ / EE $ HH $ HE $ JE $ JJ $ EE $ HH $ HE $ JE $ JJ $ EE $ HH $ HE $ JE $ JJ $ EE $ HH $ HE $ JE $ JJ $ EE $ HH $ HE $ JE $ JJ $ / EE $ JJ $ / EE $ JJ $ / EE $ JJ $ / EE $ JJ $ / EE $ JJ $ / EE $ JJ $ ll prices are in US Funds. s subject to change without notice. 14

15 RIGGING ESSORIES Shoulder Eyebolt Made in U.S.. Load UP /4 x $4.86 5/16 x 1-1/ $4.92 3/8 x 1-1/4 1, $5.90 1/2 x 1-1/2 2, $7.76 5/8 x 1-3/4 4, $ /4 x 2 5, $ /8 x 2-1/4 7, $ x 2-1/2 9, $ /4 x 3 15, $ /2 x 3-1/2 21, $99.17 Forged Wire Rope lips (Hot Dipped-Galvanized for Industrial Use) Minimum No. of lips Standard Package Rope Turnback Torque (ft./lbs.) Precision manufactured and galvanized to meet federal specifications (FF--450 Type 1 lass 1) on 1/4 and larger. Drop forged base * 1/8-5/8 packed 1 piece per polybag. 3/4 & larger shipped assembled in factory packs and tagged. per 100 lbs. Pkg. Piece 1/ /4 4-1/2 5 M244 $3.32 $3.52 3/ /4 7-1/2 9 M245 $3.54 $3.75 1/ / M246 $4.94 $5.24 5/ / M247 $5.23 $5.54 3/ / M248 $5.45 $5.78 7/ M249 $8.49 $9.00 1/ / M250 $8.63 $9.15 9/ M296 $10.74 $ / M251 $11.10 $ / M252 $14.41 $ / M253 $20.57 $ M254 $23.73 $ / M255 $26.48 $ / M256 $38.17 $ / M257 $50.00 $ / M258 $51.39 $54.47 * WRNING DO NOT EXEED WORKING LOD LIMIT USE ONLY LLOY HIN WITH OMPTILE OMPONENTS FOR OVERHED LIFTING. ll prices are in US Funds. s subject to change without notice. 15

16 HOIST RINGS Heavy Duty Hoist Ring Rated Load olt Thread Net / $ / $ / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , / $ , $ , $ , $ , / $ , / $ , / $ , / $ , $ Hoist Ring - Metric Rated Load (Kg.) olt (mm) Thread (mm) Net (Kg.) M8 x $ M8 x $ M10 x $ M10 x $ , M12 x $ , M12 x $ , M16 x $ , M16 x $ , M20 x $ , M20 x $ , M20 x $ , M24 x $ , M24 x $ , M30 x $ , M30 x $ , M30 x $ , M36 x $ , M42 x $ , M48 x $ ll prices are in US Funds. s subject to change without notice. 16

17 TROLLEYS Series Plain all earing Trolley Max Standard eam Height Standard Flange Width /4 & 1/ /8-5-1/16 10 $ /8-5-1/16 12 $ /2 & /8-5-1/8 25 $ /4 33 $ Series Plain all earing Trolley Max Standard eam Height Standard Flange Width / /2-5-5/8 17 $ $ / $ $ / $ T Trolleys - Plain Max Standard eam Height I-eam Width Min. Radius urve Wheel Tread TP0025 1/ $ TP0050 1/ $ TP $ TP / $ TP $ TP $ TP $ T Trolleys - Geared *Max Standard eam Height I-eam Width Min. Radius urve Wheel Tread TG0100 1/ $ TG $ TG $ TG $1, TG $1, * Metric Rated NOTE: Standard hand chain drop is 7.5 feet. For longer than standard 7.5 foot, add $10.50 per foot drop. ll prices are in US Funds. s subject to change without notice. 17

18 TROLLEYS Model 84 Trolleys - Plain Flange Width djustment Range Plain Trolley Spark Resistant Trolley * 1/4 2.66" - 5" $ SR $ /2 2.66" - 5" $ SR $ " - 6" $ SR $ /2 3" - 6" $ SR $1, " " $ SR $1, " " $ SR $1, " - 7" $ SR $2, " - 7" $1, SR $2, "- 7" $1, SR $2, " - 8" $1, SR $3, " - 8" $2, SR $5, " - 8" $2, SR $5, " - 8" $4, SR $10, " - 8" $5, SR $10, " - 8" $5, SR $11, Model 84 Trolleys - Geared Flange Width djustment Range Plain Trolley Spark Resistant Trolley * 1/4 2.66" - 5" $ SR $1, /2 2.66" - 5" $ SR $1, " - 6" $ SR $1, /2 3" - 6" $ SR $1, " " $ SR $1, " " $1, SR $2, " - 7" $1, SR $2, " - 7" $1, SR $2, "- 7" $1, SR $2, " - 8" $2, SR $4, " - 8" $3, SR $6, " - 8" $3, SR $6, " - 8" $5, SR $12, " - 8" $6, SR $14, " - 8" $7, SR $14, NOTE: Standard hand chain drop 8 feet - zinc plated. For longer than standard 8 foot, add $9.20 per foot drop. NOTE: Standard hand chain drop 8 feet - spark resistant. For longer than standard 8 foot, add $11.15 per foot drop. ll prices are in US Funds. s subject to change without notice. 18

19 TROLLEYS Model 84 Trolleys - Plain - For Wide Flange eams Flange Width djustment Range Plain Trolley Spark Resistant Trolley * 1/4 5-1/8" - 7" $ SR $ /2 5-1/8" - 7" $ SR $ /8" - 8" $ SR $ /2 6-1/8" - 8" $ SR $1, /8" - 8-1/4" $ SR $1, /8" - 8-1/4" $ SR $1, /8" - 9" $1, SR $2, /8" - 9" $1, SR $2, /8" - 9" $1, SR $2, /8" - 10" $2, SR $4, /8" - 10" $2, SR $5, /8" - 10" $2, SR $5, /8" - 10" $5, SR $10, /8" - 10" $5, SR $10, Model 84 Trolleys - Geared - For Wide Flange eams Flange Width djustment Range Plain Trolley Spark Resistant Trolley * 1/4 2.66" - 5" $ SR $1, /2 2.66" - 5" $ SR $1, " - 6" $ SR $1, /2 3" - 6" $ SR $1, " " $1, SR $1, " " $1, SR $2, " - 7" $1, SR $2, " - 7" $1, SR $2, "- 7" $1, SR $2, " - 8" $2, SR $4, " - 8" $3, SR $6, " - 8" $3, SR $6, " - 8" $6, SR $13, " - 8" $7, SR $14, NOTE: Standard hand chain drop 8 feet - zinc plated. For longer than standard 8 foot, add $9.20 per foot drop. NOTE: Standard hand chain drop 8 feet - spark resistant. For longer than standard 8 foot, add $11.15 per foot drop. ll prices are in US Funds. s subject to change without notice. 19

20 WELDED HIN Grade 70 inding hain - Standard Link hain Load Nominal hain Dimensions Per Foot Per Drum No. of Links per Foot Half Drum Standard Drum Large Drum 5/16 4, $ /8 6, $ Grade 70 inding hain - Short Link hain Load Nominal hain Dimensions Per Foot Per Drum No. of Links per Foot High carbon steel-heat treated. Embossed: G70, plus three letter trace code. Zinc plated with gold chromate finish. Larger sizes available upon request. Half Drum Standard Drum Large Drum 1/4 3, $ /16 4, $ /8 6, $ /2 11, $ Grade 70 - inding hain / MVP Pails Standard Link hain Feet per Pail per Pail per Pail 5/16 4, $ /8 6, $ Grade 70 - inding hain / Drum Pack - Short Link hain Feet per Pail per Pail per Pail 1/4 3, $ /16 4, $ /8 6, $ * WRNING OVERLODING & IMPROPER USE N RESULT IN INJURY TO VOID INJURY: DO NOT EXEED WORKING LOD LIMIT. USE ONLY LLOY HIN FOR OVERHED LIFTING THE HIN/ESSORIES ON THESE PGES RE NOT FOR OVERHED LIFTING. ll prices are in US Funds. s subject to change without notice. 20

21 WELDED HIN Grade 30 Proof oil hain - Drum (North merican) hain Nominal hain Dimensions Full Drum per 100 feet 1/2 Drum Self olored Zinc Plated Hot Galvanized per ft. 1/2 Drum per ft. 1/2 Drum 1/2 4, $ $ $5.52 per ft. 5/8 6, $ $8.95 3/4 10, $ $13.66 Grade 30 Proof oil hain - Drum (Imported) hain Nominal hain Dimensions Full Drum per 100 feet 1/2 Drum Self olored Zinc Plated Hot Galvanized per ft. 1/2 Drum per ft. 1/2 Drum 3/ $ $ $0.76 1/4 1, $ $ $1.05 5/16 1, $ $ $1.71 3/8 2, $ $ $2.14 per ft. Grade 30 Proof oil hain - 1/2 Drum (Imported) hain Nominal hain Dimensions 1/2 Drum per 100 feet 1/2 Drum Self olored Zinc Plated Hot Galvanized per ft. 1/2 Drum per ft. 1/2 Drum 3/ $ $ $0.76 1/4 1, $ $ $1.05 5/16 1, $ $ $1.71 3/8 2, $ $ $2.14 per ft. Grade 30 Proof oil hain - Pails (North merican) hain Load Feet per Pail per Pail Zinc Plated per ft. 1/2 4, $4.33 Grade 30 Proof oil hain - Pails (Imported) hain Load Feet per Pail per Pail Zinc Plated per ft. 3/ $0.62 1/4 1, $0.84 5/16 1, $1.30 3/8 2, $1.66 ll prices are in US Funds. s subject to change without notice. 21

22 EYE TYPE HOOKS Eye Hooks for Slings & Rigging Std Pkg Load Heat Treated arbon lear Finish Pkg. Piece Load Without Latch With Latch Zinc Plated Heat Treated arbon arbon Galvanized Heat Treated arbon Painted Orange ssembled With arbon Hook ssembled With lloy Hook Latch Kit (optional) Pkg. Piece Load Pkg. PIece Pkg. Piece Pkg. Piece /4 M6402 $9.35 $9.91 3/4 M6402G $9.81 $ M6402 $15.92 $16.88 M6502 $22.30 $23.64 M6502 $23.08 $ X1302 $ M6403 $12.45 $ M6403G $14.31 $ /2 M6403 $16.07 $17.03 M6503 $22.47 $23.82 M6503 $25.81 $ X1303 $ /2 M6404 $14.80 $ /2 M6404G $16.30 $ M6404 $17.66 $18.72 M6504 $24.68 $26.16 M6504 $27.95 $ X1304 $ M6405 $20.66 $ M6405G $24.30 $ M6405 $25.06 $26.56 M6505 $32.22 $34.15 M6505 $36.60 $ X1305 $ M6407 $52.44 $ M6407G $41.74 $ M6407 $56.22 $59.59 M6507 $56.44 $59.83 M6507 $55.94 $ X1307 $ M6409 $65.37 $ M6409G $73.78 $ M6409 $78.32 $83.02 M6509 $78.46 $83.17 M6509 $94.58 $ X1309 $ /2 M $ /2 M6411G - $ M $ M $ M $ X1311 $ M $ M6415G - $ M $ M $ M $ X1315 $ M $ M6422G - $ M $ M $ M $ X1322 $70.17 s in Metric Tons. Swivel Rigging Hooks (lloy Steel) Two Styles: Hook Only or Hook ssembled with Positive Locking Latch lloy is painted Orange. arbon is Self-olored arbon Swivel Hooks only available until current inventory is depleted. Z/P Latch Kit With Latch Without Latch Standard (optional) Package Pkg. Piece Pkg. Piece M3502 $54.25 $57.51 M3402 $49.24 $ X1302 $ /2 M3503 $61.21 $64.88 M3403 $52.18 $ X1303 $ M3504 $72.12 $76.45 M3404 $62.43 $ X1304 $ M3505 $89.52 $94.89 M3405 $79.91 $ X1305 $ M3507 $ $ M3407 $ $ X1307 $ ulk 7 M $ M3409 $ X1309 $ ulk 11 M $ M3411 $ X1311 $ ulk 15 M $ M3415 $ X1315 $ ulk 22 M $1, M3422 $1, X1322 $70.17 s in Metric Tons. Replacement Latches for Swivel, Rigging and Shank Hooks lloy arbon Old Style No. Stainless New Style No. Zinc 1 3/4 4X405 $ /4 4X405 $5.33 4X1302 $5.53 4X1302S $8.15 4X1302M $ /2 1 4X405 $5.33 4X1303 $6.05 4X1303S $8.90 4X1303M $ /2 4X406 $5.97 4X1304 $6.88 4X1304S $ X1304M $ X406 $5.97 4X1305 $6.55 4X1305S $ X1305M $ X410 $9.06 4X1307 $ X1307S $ X1307M $ X412 $ X1309 $ X1309S $ X1309M $ /2 4X414 $ X1311 $ X1311S $ X1311M $ $ X1315 $ X1315M $ $ X1322 $ X1322M $69.50 Use standard cotter pin to lock latch. Old style rigging hooks only. New Style No. Stainless New Style No. Positive Locking WRNING DO NOT EXEED WORKING LOD LIMIT USE ONLY LLOY HIN WITH OMPTILE OMPONENTS FOR OVERHED LIFTING. Old Style New Style ll prices are in US Funds. s subject to change without notice. 22

23 EYE TYPE HOOKS Eye Sling Hook with Latch (Dual-Rated for H800 & H1000) Std. Pkg. Quantity Pkg. Piece 9/32 4, $34.20 $ /8 8, $51.45 $ /2 15, $80.75 $ /8 22, $ $ /4 35,300 ulk $ /8 34,200 ulk $ ,700 ulk $ /4 72,300 ulk $ Note: For 7/32 size use 9/32 hook. vailable from stock with / without latch. Replacement latch kits are also available. must determine if latch is required on the hook. Latchlok Hooks 5/8 28, $ /4 28, $ Replacement Parts Latch Kits for Herc-lloy 800 Latch Type Hooks Hook 7/ $ / $4.55 3/ $8.79 1/ $ / $ / $ / $ $ / $73.70 Latch Kit # * WRNING DO NOT EXEED WORKING LOD LIMIT USE ONLY LLOY HIN WITH OMPTILE OMPONENTS FOR OVERHED LIFTING. ll prices are in US Funds. s subject to change without notice. 23

24 GRDE 80 HIN TTHMENTS lloy Master Links with Engineered Flats Trade With hain With Wire Rope & Synthetics Nominal Dimensions Material Inside Inside Width Flat Dimensions FW FT 7/16 4,200 3,360 ML ML040NF $ /2 5,570 4,600 ML ML050NF $ /8 9,000 7,200 ML ML063NF $ /4 14,200 11,360 ML ML075NF $ /8 17,300 13,840 ML ML087NF $ ,500 21,200 ML ML100NF $ /4 37,400 29,920 ML ML125NF $ /2 53,000 42,400 ML $ /4 72,150 57,720 ML $ ,200 75,360 ML $ /4 119,200 95,360 ML $ /2 147, ,720 ML $1, /4 178, ,440 ML $1, Note: Shaded rows contain engineered flats for easy attachment to chain, wire rope and synthetics. Flat E Flat lloy Master Link Sub-ssemblies Trade With hain With Wire Rope & Synthetic omplete ssembly Master Link Nominal Dimensions Material Inside Inside Width Intermediate Link Nominal Dimensions Material D 1/2 5,750 4,600 S050 ML ML $ /8 9,000 7,200 S063 ML ML $ /4 14,000 11,200 S075 ML ML $ /8 17,300 13,840 S087 ML ML $ ,500 21,200 S100 ML ML $ /4 37,400 29,920 S125 ML ML $ /2 53,000 42,400 S150 ML ML $ /4 72,150 57,720 S175 ML ML $ ,200 73,360 S200 ML ML $ /4 119,200 95,360 S225 ML ML $1, /2 147, ,720 S250 ML ML $1, /4 178, ,400 S275 ML ML $2, Inside E Inside Width F D F Overall ll prices are in US Funds. s subject to change without notice. 24

25 GRDE 80 LINKS ND SLINGS Omega-Lok oupling Link Trade Standard Pack Quantity Pkg. Replacement Load Pin Replacement Retainer 9/32 3, $20.30 $ $ $0.70 3/8 7, $ $ $1.40 1/2 12, $ $ $1.70 5/8 18, $ $ $2.10 Hammerlok oupling Link & Parts in. mm omplete Hammerlok Stand. Pack Quantity Pkg. Load Pin Kit 7/ , $23.70 $25.12 R $7.75 9/32 7 3, $28.45 $30.16 R $8.35 3/8 10 7, $30.35 $32.17 R $ / , $50.25 $53.27 R $ / , $64.05 $67.89 R $ / , $91.05 $96.51 R $ / , $ $ R $ , $ $ R $ / , $ $ R $81.55 djust - - Link Sling /32 2,700 4, $ /32 2,700 4, $ /32 4,300 7, $ /32 4,300 7, $ /8 8,800 15, $ /8 8,800 15, $ ll prices are in US Funds. s subject to change without notice. 25

26 GRDE 80 LINKS ND SLINGS Oblong Master Links or Single and Double ranch Slings - Standard s Trade Load atalog Number Material Nominal Dimensions Inside Inside Width Type & of hain Single Double 3/8 3,600 H /32 7/32 $ /2 6,100 H /32 9/32 $ /4 12,300 H /8 3/8 $ ,800 H /2 or 5/8 1/2 $ /4 31,300 H /4 5/8 $ /2 49,000 H /8 3/4 $ /4 73,500 H /8 $ ,900 H /4 1 $ /4 125,200 H /4 $ /4 187,800 H $1, Oblong Master Links - Special s ny size not listed above apply for special price. 1 x 4 x 8 18, $ /4 x 6 x 12 22, $ /2 x 7 x 14 36, $ /2 x 6 x 12 42, $ /4 x 7 x 14 63, $ x 8 x 16 77, $ /2 x 8 x , $1, lloy Forged Master Links - Suitable for Overhead Lifting Material Nominal Dimensions Inside Inside Width 1/2 5,100 M50P $ /8 7,700 M62P $ /4 10,600 M75P $ ,400 M100P $ * WRNING DO NOT EXEED WORKING LOD LIMIT USE ONLY LLOY HIN WITH OMPTILE OMPONENTS FOR OVERHED LIFTING. ll prices are in US Funds. s subject to change without notice. 26

27 RIGGING ESSORIES ig Orange Mid-Grip (Double Saddle) Wire Rope lips Fist Grip * Dacromet Finish Min. No. of lips Std. Pkg. (ssembled) Rope Turn ack Torque (ft./lb.) per 100 Pkg. Piece 3/16 & 1/ M2246 $10.75 $ / M2247D* $11.37 $ / / M2248 $12.11 $ / / M2250 $14.96 $ / M2250 $14.96 $ / / M2251 $21.13 $ / / M2251 $21.13 $ / M2252 $28.92 $30.66 Forged M Piggy-ack Wedge Socket lip MIn. Tail Torque (ft./lb.) Standard Package Pkg. Piece 3/ M248D $13.98 $ / M249D $17.79 $ / M250D $21.60 $ / M296D $25.28 $ / M251D $27.39 $ / M252D $34.78 $ / M253D $50.25 $ M254D $57.91 $ /8 6-3/ M255D $64.64 $ /4 7-1/ M256D $92.19 $ /8 8-1/ M257D $ $ / M258D $ $ Tuff Grip Wire Rope lips For Suspended Scaffolding Finish Min. No. of lips Min. Turn ack Torque (ft./lb.) per 100 Std. Pack * heck with the wire rope manufacturer and equipment manufacturer s recommendations. Pkg. Piece 5/16 Dacromet 2* M2347 $7.53 $7.98 * WRNING TO VOID INJURY REFER TO M LIFTING, PULLING ND INDING MNUL (PM-10) ll prices are in US Funds. s subject to change without notice. 27

28 RIGGING ESSORIES Quick Links (Zinc Plated) - Imported Std Pkg. Inside Width Inside Width Side Opening Quick Links are not heat treated. Use only with chain of equal or lower working load limit. Pkg. Piece 1/ /64 25/64 13/ $1.49 $1.58 3/ /2 1/2 1/ $1.67 $1.77 1/ /4 9/16 9/ $1.97 $2.09 5/16 1, /6 11/16 3/ $3.21 $3.40 3/8 1, /16 3/4 7/ $4.21 $4.46 1/2 3, /16 15/16 19/ $7.28 $7.72 Repair Links / Lap Link (Zinc Plated) Inside Standard arton per 100 Pkg. Piece 1/4 1-1/ $0.83 $0.88 5/16 1-1/ $1.71 $1.81 3/ $2.36 $2.50 1/2 2-1/ $3.73 $3.95 levis Links For hain Load Std. Pkg. Piece 5/16 4,400 ulk $ /8 6,600 ulk $21.91 ll prices are in US Funds. s subject to change without notice. 28

29 MSTER LINKS ND LOD INDERS Pear Shaped Master Link Trade atalog No. Load Finished Material Inside Inside Width Inside Width D SINGLE Type & of Sling DOULE TRIPLE 1/2 H51 9, /32, 9/32, & 3/8 7/32 & 9/32 7/32 $ /4 H79 18, /2 3/8 9/32 $ H103 30, /8 1/2 3/8 $ /4 H129 45, /4 5/8 1/2 $ /2 H153 71, /4 5/8 $ /4 H179 86, $ H , /4 $ /4 H , $ D Dixie Forged Lever inder - Painted Red G30 hain Grade & G43 G70 Load Take up Handle Std. Pkg. Package Piece 1/4 1/4 2, $29.87 $ /8 3/8 5/16 5, $45.78 $ /8 3/8 3/8 7, / $51.93 $ /2 1/2 3/8 9, $76.61 $81.21 Item is also suitable for G80 3/8 chain Removable Handle Ratchet inders hain Grade & G30 G70 Description Load Take up Handle Std. Pkg. 3/8 5/16 ody 5, $ /2 3/8 ody 9, $70.29 Handle H $29.40 Ratchet Type inder - Forged arrel - Painted Red G30 hain Grade & G70 G80 Load Takeup Handle Std. Pkg. Package Piece 5, $63.83 $ , $71.51 $ /8 5/16 5, $69.71 $ /8 3/8 3/8 7, $81.53 $ /4 2, $58.60 $ /8 5, * $78.41 $ /2 3/8 3/8 9, $83.83 $ /8 1/2 1/2 13, $ $ Supplied without hooks * Heavy Duty - Larger Dia. body * WRNING TO VOID INJURY REFER TO M LIFTING, PULLING ND INDING MNUL (PM-10) ll prices are in US Funds. s subject to change without notice. 29