STATE OF MINNESOTA PRICING PAGES (Typed responses required)

Transcription

1 SEQ. # MOTOR GRADERS M-439(5) July, 2014 STATE OF MINNESOTA PRICING PAGES (Typed responses required) Page 1 of 2 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Website: RDO Equipment Company / Nortrax Jesse Miller Dupont Avenue South Burnsville, MN jmiller@rdoequipment.com / / Furnish separate price quote for each MOTOR GRADER being offered. 1.1 MOTOR GRADER Make & Model Normal/Variable HP Operating Weight John Deere 670G 164 kw (220 hp) kg (42,340 lb.) Work lights Blade Width Blade Height Blade Thickness Cutting Edge Size Circle drive slip clutch Driving lights; 2 high- and 2 lowbeam halogen headlights; front and rear LED turn signals and marker lights; LED brake and hazard warning lights 3.66 m (12 ft. 0 in.) 610 mm (24 in.) 22 mm (0.88 in.) Thickness 16 mm (0.62 in.) Width 152 mm (6 in.) Optional Numbers of Drive Tires 4 Alternator Size 100 Battery CCA Seat type Differential type Fuel Tank Size Rims, Size in Inches/Type Tires Block Heater, Watts Starting Aid 1,400 CCA Standard Fabric Air Suspension Seat with Armrests and Headrest Spiral bevel; hydraulically actuated, clutch type can be applied on-the-go; selectable manual or automatic differential lock L (110 gal.) 14.0 R 24 Inch w/ 3 pc. Rims G2/L2 Single Star Snow-plus Michelin Radial Tires 1500 Watt Ether Starting Aid

2 SEQ. # MOTOR GRADERS M-439(5) July, 2014 STATE OF MINNESOTA PRICING PAGES (Typed responses required) Page 2 of 2 Transmission, Speeds Direct-drive John Deere PowerShift Plus, modulated shift-on-the-go, Event-Based Shifting (EBS), inching pedal; independent transmission reservoir with separate filtration and cooling system with 117- L/min. (31 gpm) gear pump. Maximum Travel Speeds With no tire slip at 2,180 rpm, R24 tires Shift Lever Position km/h (2.5 mph) Shift Lever Position km/h (3.5 mph) Shift Lever Position km/h (4.8 mph) Shift Lever Position km/h (6.8 mph) Shift Lever Position km/h (10.2 mph) Shift Lever Position km/h (14.4 mph) Shift Lever Position km/h (20.1 mph) Shift Lever Position km/h (28.3 mph) Forward/Reverse 8 / 8 Auto Shift/Manual/Power shift Heater BTU Window openings Hydraulics Cab Profile/Height Warranty Power Shift 31,500 BTU Opening front and side windows Closed-center, pressurecompensated load-sensing (PCLS), variable-displacement piston pump, O-ring face-seal fittings Low Profile ROPS Cab, 10' 5" to top of cab 1 year full machine BASE PRICE 178,525

3 SEQ # STATE OF MINNESOTA July, 2014 MOTOR GRADER - OPTIONS PRICE PAGES M-439(5) (Typed Response Required) State Item # Description Qty Price 1.0 Machine 178, OPERATOR STATION Offer operator station options. Number the items starting with 2.1, 2.2, etc., English Labels and Decals Low Cab w/ Fixed Lower Front and Side Windows Low Cab w/ Fixed Lower Front and Side Opening 424 Windows Low Cab w/ Lower Front and Side Opening Windows 568 Includes Roof Wiring Harness for Lighting, Beacon, Precleaner and Heated Mirrors Grade Pro Low Cab w/ Lower Front and Side Opening In Configuration Windows Requires configuration code1020 and seat code Requires (1) T bracket to optionally move monitor to the RH door post Powered Cab Air Precleaner 423 Powered Cab Precleaner pre-filters outside air to significantly extend cab filter life No Powered Cab Air Precleaner Standard Fabric Air Suspension Seat with Armrests and Headrest For use with cab codes 5020, 5025, 5030 & Premium Heated, Leather/Fabric, High-Wide Back, Air 339 Suspension Seat with Armrests For use with cab codes 5020, 5025, 5030 & This seat does not include a headrest. If a headrest is desired, please order AT from service parts Grade Pro Premium Heated, Leather/Fabric, High-Wide In Configuration Back Air Suspension Seat For use with cab codes 5060 & This seat does not include a headrest. If a headrest is desired, please order AT from service parts Exterior Mounted Rearview Mirrors Heated Exterior Mounted Rearview Mirrors Lower Front Intermittent Wiper & Washer Less Lower Front Window Wiper & Wiper AM/FM Radio with Aux and Weather Band (WB) Premium AM/FM Radio with Bluetooth, Aux, Weather Band 692 (WB), and XM Ready Requires engine code 1125 or No Radio Air Conditioner Refrigerant Charged Sound Absorption Package 377 Requires engine code 1110, 1115, 1120, or No Sound Absorption Package In Base Price Requires engine code 1110, 1115, 1120, or No Sound Absorption Package Requires engine code Rear Camera 1, No Rear Camera Front Window Movable Sun Visor Rear Retractable Sun Shade Decelerator lbs. multi purpose (ABC) Dry Chemical Fire Extinguisher Tall ( 26in.(660mm) higher than Standard Frame Lights) 163 Front Snow Plow Light Bar Not for use with code 6730 Mid Mount Scarifier Secondary Steering 1, AT AM/FM/WB Radio with CD Player AT Blade Lift Lever Kit AT MP3/iPod/Sat Radio/Cell Phone holder w/ 2 Power Ports 225 and Cargo Net kit includes a cargo net, bracket/holder, wire harness, 2 power ports, plastic holder, and instructions AT Slope Meter Mounting Bracket AT AIR FILTER AT FILTER ELE AT FILTER ELE AT AIR FILTER AT FUEL FILTE

4 2.390 AT AIR FILTER AT HYDRAULIC FILTE AT FUEL FILTER AT OIL FILTER PC10194 parts Book RE OIL FILTER RE FILTER ELEMENT TM12135 TEST MANUAL670G TM12138 REPAIR MANUAL 3.0 ENGINE/POWER TRAIN Offer engine and powertrain options. Number starting with 3.1, 3.2, etc John Deere PowerTech PSS 9.0L meets EPA FT4 Emissions (220 Net Peak hp) Quick Service Group No Quick Service Group Standard Fuel & Water Filtration Severe Duty Fuel & Water Filtration System 241 For use where fuel quality is questionable and/or additional water separation is required. Filter base contains fuel heater Engine Exhaust with Flat Black Muffler for 6.8L In Configuration Requires engine code Engine Exhaust with Flat Black Muffler for 9.0L In Configuration Requires engine code 1120 or Engine Exhaust with Flat Black Stack for 9.0L (EPA FT4 only) Requires engine code Engine Exhaust with Chrome Stack for 9.0L (EPA FT4 322 only) Requires engine code Autoshift Transmission Manual Shift Transmission (no Autoshift) Transmission Solenoid Valve Guard Required with engine code Required for Canada and Russia. Recommended for snow plowing applications NO Transmission Solenoid Valve Guard In Base Price Engine Air Intake Manifold Pre-Heater 269 Requires code L Engine. Cannot be used with code 9370 ether start aid Engine Block Heater Recommended for use on machines that will be operating above 8,000 feet (2440 meters) in altitude, and/or colder than 0 degrees F (-18 degrees C). Includes all weather receptacle conveniently located at ground level IGHT Ether Starting Aid Requires 9.0L engine, codes 1120, 1125, or 1140 Cannot be used with code 9340, Engine Air Intake Manifold Pre-Heater Ether can not included Heavy Duty Air Cleaner - 9.0L 14 in 459 Engine code 1140 only 15% larger capacity Adjusting Rotary Ejector Precleaner 254 Requires code 9380 Ability to raise engine pre-cleaner to improve air filter performance Fast Fill Fuel System 1, gpm fill rate Cold Weather Control Valve Covers 94 Plastic covers that mount below the cab, shielding the control valve from snow and slowing down hydraulic heat loss in winter. Requires code 1010 standard hydraulics T 670G MOTOR GRADER Keep in mind that the following John Deere motor graders 770, 772, 870 & 872 offer optimized performance for high speed snow plowing applications AT Diesel Fuel-Fired Engine Coolant Heater Kit For 9.0L FT4 Engines Includes igniter, timer and coolant circulation pump. Recommended for temperatures below -13 F(-25 C). Average installation, 6 hours. 4, ELECTRICAL/LIGHTS Offer electrical/light options. Number starting with 4.1, 4.2, etc amp Alternator Cannot be used with engine code In Base Price

5 amp Alternator amp Alternator Requires engine code amp Alternator Requires engine code JDLink Ultimate Cellular JDLink Ultimate Satellite for the Americas JDLink Ultimate Cellular for the Americas, excluding Costa 632 Rica - 5 Years No Topcon Grade Control No Topcon Radio Installation Transporting Lights (4 Halogen Transport Lights) Includes 2-high and 2-low beam halogen headlights Grading Lights (10 Halogen Lights) 500 Includes light code 7110 Transporting Lights plus (6) additional work lights (2- bottom cab, 2 - mid-frame, 2 - reversing lights on rear grill) Deluxe Grading Lights (18 Halogen Lights) 791 Includes light code 7130 Grading Lights plus (8) additional work lights (4- corner cab, 2 - front cab, and 2 - right-side cab roof) Premium Grading Lights (18 LED Lights) 5,102 Same lighting locations as light code 7160 Deluxe Grading Lights, all Premium Grading Lights are LED to-12 Volt Converter (15 amps peak / 10 amps continuous) to-12 Volt Converter (30 amps peak / 25 amps 215 continuous) Recommend code 8120 for additional 12 volt needs, such as business band or CB radios Level 1 Electronic Corrosion Prevention Package 941 Corrosion Preventive Treatment for critical electronic connections. Requires code 5710 Transmission Solenoid Valve Guard Right Side Engine Compartment Work Light Flip Down Cab Beacon Bracket (RH) 72 Order codes 9290 and 9295 for dual beacon brackets Flip Down Cab Beacon Bracket (LH) 72 Order codes 9290 and 9295 for dual beacon brackets Beacon with Flip Down Cab Beacon Bracket (RH) 311 Includes beacon and bracket. Order codes 9298 and 9299 for dual beacons Beacon with Flip Down Cab Beacon Bracket (LH) 311 Includes beacon and bracket. Order codes 9298 and 9299 for dual beacons AT Single LED work light with high beam lens 355 Replacement for both 12V & 24V work and drive lamps AT Single LED work light with symmetric lens 355 Replacement for both 12V & 24V work and drive lamps RDO Parts SM4215 LED LA - LED Beacon TIRES/RIMS Offer tire/rim options Number starting with 5.1, 5.2, etc Less Tires & Wheels NOT AVAILABLE FOR UNIT 3R & In. 12 PR SGG Firestone G2 Bias Tires w/ 1 pc. Rims Bias Ply Tires: Maximum per tire load 6800 lbs In. 12 PR Titan G2 Bias Tires w/ 1 pc. Rims Bias Ply Tires: Maximum per tire load 6800 lbs In. 12 PR SGG Firestone G2 Bias Tires w/ 3 pc. Rims Bias Ply Tires: Maximum per tire load 6800 lbs In. 12 PR Titan G2 Bias Tires w/ 3 pc. Rims Bias Ply Tires: Maximum per tire load 6800 lbs R 24 Inch G2/L2 Single Star XGLA2 Michelin Radial Tires w/ 1 pc. Rims Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star VUT Bridgestone Radial Tires w/ 1 pc. Rims Maximum per tire load 7828 lbs. (12,325) (5,216) (8,639) (4,306) (7,902) (2,184) (3,256)

6 R 24 Inch G2/L2 Single Star XGLA2 Michelin Radial (1,132) Tires w/ 3 pc. Rims Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star VUT Bridgestone Radial (2,205) Tires w/ 3 pc. Rims Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star Sno-plus Michelin Radial Tires w/ 1 pc. Rims. Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star VSW Bridgestone Radial (814) Tires w/ 1 pc. Rims. Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star Snow-plus Michelin Radial 1,050 Tires w/ 3 pc. Rims. Maximum per tire load 7828 lbs R 24 Inch G2/L2 Single Star VSW Bridgestone Radial 235 Tires w/ 3 pc. Rims. Maximum per tire load 7828 lbs In. 12 PR G2/L2 SGG Firestone Bias Tires w/ 1 pc. (4,134) Rims Bias Ply Tires: Maximum per tire load 6400 lbs SGLDL2A 12 ply L2/G2 TL Goodyear Bias Tire (5,466) In. 12 PR G2/L2 SGG Firestone Bias Tires w/ 3 pc. (2,828) Rims Bias Ply Tires: Maximum per tire load 6400 lbs SGLDL2A 12 ply L2/G2 TL Goodyear Bias Tire (4,322) R 25 Inch L2 Single Star XTLA Michelin Radial Tires w/ (554) 1 pc. Rims Maximum per tire load 8048 lbs R 25 Inch L2 Single Star VUT Bridgestone Radial Tires (1,306) w/ 1pc. Rims Maximum per tire load 8048 lbs R 25 Inch L2 Single Star TGD2 Titan Radial Tires w/ 1 (5,474) pc. Rims Maximum per tire load 8048 lbs R251 Star GP2B L3/G3 6S TL Goodyear Radial Tire W/ (3,040) 1 pc. Rim R 25 Inch L2 Single Star XTLA Michelin Radial Tires w/ 3 pc. Rims Maximum per tire load 8048 lbs. 752

7 R 25 Inch L2 Single Star VUT Bridgestone Radial Tires 1 w/ 3pc. Rims Maximum per tire load 8048 lbs R 25 Inch L2 Single Star TGD2 Titan Radial Tires w/ 3 (4,417) pc. Rims R251 Star GP2B L3/G3 6S TL Goodyear Radial Tire w/ (1,942) 3 pc. Rims R 25 Inch G3/L3 Single Star XHA Michelin Radial Tires 871 w/ 1 pc. Rims Maximum per tire load 8048 lbs R 25 Inch G3/L3 Single Star XHA Michelin Radial Tires 2,380 w/ 3 pc. Rims Maximum per tire load 8048 lbs R 25 Inch G2/L2 Single Star Sno-plus Michelin Radial 1,586 Tires w/ 1 pc. Rims. Maximum per tire load 8048 lbs R 25 Inch G2/L2 Single Star VSW Bridgestone Radial 193 Tires w/ 1 pc. Rims. Maximum per tire load 8048 lbs R252 Star AS3A L3/G3 4S TL Goodyear Radial Tire w/1 1,010 pc. Rims All Season, Superior traction on all surfaces, Minimize use of chains, Maximum per tire load 10,500 lbs R 25 Inch G2/L2 Single Star Sno-plus Michelin Radial 3,096 Tires w/ 3 pc. Rims. Maximum per tire load 8048 lbs R 25 Inch G2/L2 Single Star VSW Bridgestone Radial 1,703 Tires w/ 3 pc. Rims. Maximum per tire load 8048 lbs Front Fenders No Front Fenders In Base Price Rear Wheel Fenders 1, in.(476mm) Rear Wheel Fenders Fenders are not for use with 550 tires. Fenders can only be used with chains that are designed for 3" of radial clearance and 1.75" of sidewall clearance. of front mud flap on rear fenders GCR Spare Tire: 1400R24 Bridgestone VKT 1, GCR Spare Tire: 1400R24 Bridgestone VSW 1, GCR Spare Tire: 17.5R25 Bridgestone VSW 1, GCR Spare Tire: 17.5R25 Bridgestone VUT 1, GCR Spare Tire: 17.5X25 Firestone SSG G-2 12 ply GCR Spare Tire: 1400X24 Firestone SGG G-2 12 ply GCR A672FRNT - Spare Rim: 24"x 10" Fronts 1, GCR A67R3S3D - Spare Rim: 24"x9" Rears 1, GCR A872353D - Spare Rim: 25" X 14" 1, HYDRAULICS Offer hydraulic options. Number starting with 6.1, 6.2, etc G with Standard Hydraulic Controls GP with Grade Pro Controls 14, Hydraulic Pump Disconnect Required with engine code Required for Canada and Russia No Hydraulic Pump Disconnect In Base Price

8 Oil, SAE 10W Oil, Hydrau All Season XR 333 John Deere Premium Synthetic Hydraulic Fluid Provides working range of -40 C (-40 F) to 40 C (104 F). Required for unit 3R Base Hydraulics - 4 Function Controls Requires configuration code Base Functions: Rear Steer, Circle Side shift, Wheel Lean & RH Blade Lift w/ Float Base Hydraulics w/ 1 Auxiliary Function Control 759 Requires configuration code Base functions plus 1 function w/float control - front plumbing and hoses for Scarifier or auxiliary application. For use with front scarifier Mid Mount Scarifier Base Hydraulics w/ 1 Auxiliary Function Control Requires Mid Mount Scarifier code 6730 and configuration code Midmount scarifier base hydraulics with 1 auxiliary function control with float control for mid mount scarifier Grade Pro Controls for Mid Mount Scarifier w/1 Auxiliary Function Control Requires codes 1020 and Mid Mount Scarifier code Base Hydraulics w/ 2 Auxiliary Function Controls Requires configuration code Base functions plus 2 functions w/float control - front plumbing and hoses for Scarifier and/or auxiliary application. For use with front scarifier Base Hydraulics w/ 3 Auxiliary Function Controls Requires code Base Functions plus 3 functions-(2) with and (1) w/o float control, front plumbing and hoses for Scarifier and/or auxiliary application. For use with front scarifier Grade Pro Controls with Base Functions Requires code Grade Pro Base Hydraulics Functions: Rear Steer Circle Side shift Wheel Lean Right and Left hand Blade Lift w/ Float Circle Rotate Blade Side Shift Blade Tilt Lever Steering (also includes steering wheel) Grade Pro Controls w/1 Rear Auxiliary Function and Left Hand Lever Controller Requires code Base functions plus 1 auxiliary function w/float control - Rear plumbing and hoses for Ripper or auxiliary application. For Use with Rear Ripper Grade Pro Controls w/1 Front Auxiliary Function Control and Right Hand Lever Controller Requires code Base functions plus 1 FRONT auxiliary function w/float control - front plumbing and hoses for Scarifier and/or auxiliary application Grade Pro Controls w/1 Rear Auxiliary Function Control and Right Hand Lever Controller Requires code Base functions plus 1 REAR auxiliary function w/float control - rear plumbing and hoses for auxiliary application Grade Pro Controls w/1 Front Auxiliary Function and 2 Rear Auxiliary Functions with Right and Left hand Controllers and 2 Miniature Multi Axis Joysticks Requires code Base Functions plus 3 auxiliary functions- 1 front and 2 rear auxiliary functions Grade Pro Controls w/1 Front, 1 Rear Auxiliary Function Control with Right and Left hand Controllers and 2 Miniature Multi Axis Joysticks Requires code Base Functions plus 2 auxiliary functions - 1 front and 1 rear with float control iary functions Grade Pro Controls w/1 Front Auxiliary Function and 3 Rear Auxiliary Functions with Right and Left hand Controllers and 2 Miniature Multi Axis Joysticks Requires code Base Functions plus 4 auxiliary functions - 1 front and 3 rear with float control ,433 2,106 In Configuration ,278 1,536 3,039

9 Grade Pro Controls w/3 Front and 3 Rear Auxiliary 4,557 Function Controls with Right and Left hand Controllers and 2 Miniature Multi Axis Joysticks Requires code Base Functions plus 6 auxiliary functions-3 front and 3 rear with float control on t control Base Hydraulics- 4 Function Controls Requires code Base Functions: LH Blade Lift w/ Float, Blade Side shift, Circle Rotate, Blade Tilt Base Hydraulics w/ 1 Auxiliary Function Control 668 Requires code Base Functions plus 1 function w/float control and lines for Ripper or auxiliary application. For Use with Rear Ripper/Scarifier Combination Base Hydraulics w/2 Auxiliary Function Control 1,348 Requires code Base functions plus 2 functions w/float control and lines for Ripper and/or auxiliary application. For Use with Rear Ripper/Scarifier Combination Base Hydraulics w/ 3 Auxiliary Function Control 2,021 Requires code Base Functions plus 3 functions-(2) with and (1) w/o Float Control, and lines for Ripper and/or auxiliary application. For Use with Rear Ripper/Scarifier Combination Grade Pro Controls - Left Side In Configuration Requires code Accompanies GRADE PRO CONTROLS - RIGHT SIDE order code selection AT Function valve section and linkage Right Kit 1,144 Includes detented float. Installation instructions T AT Function valve section and linkage Left Kit 1,038 Includes detented float. Installation instructions T AT Function valve section and linkage Right Kit 1,147 Includes detented float. Installation instructions T AT Function valve section and linkage Left Kit 1, AT Function valve section and linkage Right Kit AT Function valve section and linkage Left Kit AT One Hand Blade Lift Kit 800 To convert two-hand blade lift controls to one-hand controls on the right side, when the machine is NOT already equipped with a RH 5th function valve AT Grade Pro EH Controls Hydraulics Auxiliary Section 1,235 For only Grade Pro G-Series Graders. Requires mini joystick and or dual control levers AT Hydraulic Warm up Circuit for Cold Starts FALLS - 3PFQ - Stucchi 2 coupler assembly 1, FALLS - 5PFQ - Stucchi 4 coupler assembly 1, MOLDBOARD/CUTTING EDGE/END BITS/CIRCLE DRIVE Offer these options starting with 7.1, 7.2, 7.3, etc Blade Impact Absorption System 1,652 Protects Moldboard and draft frame from impacts with Stationary objects No Blade Impact Absorption System Ft. x 24 In. x 7/8 In. (3.66 M x 610 mm x 22 mm) with 6 In. x 5/8 In. (152 x 16 mm) Cutting Edge and 5/8 in. (16mm) Hardware Ft. x 24 In. x 7/8 In. (3.66 M x 610 mm x 22 mm) with In. x 3/4 In. (203 x 19 mm) Cutting Edge and 5/8 in. (16mm) Hardware Ft. x 27 In. x 1 In. (3.66 M x 686 mm x 25 mm) with In. x 3/4 In. (203 x 19 mm) Cutting Edge and 5/8 in. (16mm) Hardware Ft. x 27 In. x 1 In. (3.96 M x 686 mm x 25 mm) with In. x 3/4 In. (203 x 19 mm) Cutting Edge and 5/8 in. (16mm) Hardware Ft. x 24 In. x 7/8 In. (4.27 M x 610 mm x 22 mm) with In. x 5/8 In. (152 x 16 mm) Cutting Edge and 5/8 in. (16mm) Hardware Ft. x 24 In. x 7/8 In. (4.27 M x 610 mm x 22 mm) with 8 In. x 3/4 In. (203 x 19 mm) Cutting Edge and 5/8 in. (16mm) Hardware 716

10 Ft. x 27 In. x 1 In. (4.27 M x 686 mm x 25 mm) with In. x 3/4 In. (203 x 19 mm) Cutting Edge and 5/8 in. (16mm) Hardware Requires engine code 1120, 1125 or Ft. x 27 In. x 1 In. (4.27 M x 686 mm x 25 mm) with In. x 3/4 In. (203 x 19 mm) Cutting Edge and 3/4 in. (19mm) Hardware Requires engine code 1120, 1125 or Single Input Gearbox without Slip Clutch Single Input Gearbox with Slip Clutch 1,257 Slip clutch protects circle, circle drive gearbox and draft frame from damage when end of moldboard comes in contact with stationary objects. Slip clutch is integral to immovable object Heavy Duty Dual Input Gearbox without Slip Clutch 718 Heavy duty dual input gearbox is an industry exclusive and provides significant improvements in circle drive component durability. The heavy duty dual input circle le object Heavy Duty Dual Input Gearbox with Slip Clutch 1,975 Heavy duty dual input gearbox is an industry exclusive and provides significant improvements in circle drive component durability. The heavy duty dual input circle immovable object Reversible Overlay End Bits 233 Not available for unit 3R & in. Left Hand Moldboard Extension 1,013 Requires moldboard code 2060, 2070, 2080 or Not available for units 3R & in. Right Hand Moldboard Extension 1,013 Requires moldboard code 2060, 2070, 2080, or Available to all other units with no restrictions AT Moldboard Extension, 24 X 24 X 7/8 In. Left Hand 1,366 7/8 in. (22mm) thick. Includes 5/8 in. (17mm) Hardware. Cutting Edge is not included AT Moldboard Extension, 24 x 24 x 7/8 In. Right Hand 1,366 7/8 in. (22mm) thick. Requires 5/8 in. (17mm) Hardware. Cutting Edge is not included AT Moldboard Extension, 27 X 24 X 1 In. Left Hand 1 in. ( 25mm) Thick 1,366 Includes 5/8 in. (17mm) Hardware. Cutting Edge is not included AT Moldboard Extension, 27 X 24 X 1 In. Right Hand 1,366 1 in. ( 25mm) Thick Includes 5/8 in. (17mm) Hardware. Cutting Edge is not included AT Moldboard Extension, 27X 24 X 1 In. Left Hand 1,366 1 in. ( 25mm) Thick Includes 3/4 in. (19mm) Hardware. Cutting Edge is not included AT Moldboard Extension, 27 X 24 X 1 In. Right Hand 1,366 1 in. ( 25mm) Thick Includes 3/4 in. (19mm) Hardware. Cutting Edge is not included AT Dual Input Circle Drive Gearbox (with Slip Clutch) 4,354 Protects circle, circle drive gearbox and draft frame from damage when end of moldboard comes in contact with stationary objects. Slip clutch is integral to the 2220 inserts. p on rear fenders AT Dual Input Circle Drive Gearbox (without Slip Clutch) 3,114 Note: For use with G-series (code 1010 Standard Hydraulic Controls) AT Dual Input Circle Drive Gearbox (with Slip Clutch) 4,354 Protects circle, circle drive gearbox and draft frame from damage when end of moldboard comes in contact with stationary objects. Slip clutch is integral to the 2220 inserts. p on rear fenders AT Dual Input Circle Drive Gearbox (without Slip Clutch) Note: For use with G-series (code 1020 "Grade Pro" Electro Hydraulic Controls) 3, FRONT ATTACHMENTS Offer front attachment options. Starting with 8.1, 8.2, etc Front Push Block 1,914

11 Front Scarifier 4,126 Includes Front Hydraulics, plumbing and hoses Scarifier with 2 pitch positions and 9 shank pockets Five 1 x 3 inch Scarifier Shanks w/teeth If additional shanks are desired order (1) each of T6Y5230 Tooth, T Shank ntrol on t control Balderson Style Front Lift Group 3,289 Requires hydraulic code 6520, 6530, 6540, 6560, 6580, 6585, 6590, or (2) AT Mating Hooks from Parts are available to convert old front attachments to the Bladerson-style lift group Less Front Attachment Front-Mounted Dozer Blade, 97 in. x 37.6 in. (2464 mm x 4, mm) Requires hydraulic controls on the right side with a minimum 1 front auxillary function. Requires or 14.0 R24 tires Front-Mounted Dozer Blade, 105 in. x 37.6 in. (2667 mm x 4, mm) Requires hydraulic controls on the right side with a minimum 1 front auxillary function. Requires , 14.0 R24, , or 17.5 R 25 tires FALLS-Falls Options-29" HUSTING HITCH. INSTALLED 3, FALLS-Falls Options-34" OPTION (ADD TO 29" HUSTING HITCH) FALLS-Falls Options-CARBIDE CUTTING EDGE FOR HDR-11 1, FALLS-D FT FIXED DOZER BLADE 36" HIGH 4, FALLS-D FT FIXED DOZER BLADE 36" HIGH 4, FALLS-D FT FIXED DOZER BLADE 36" HIGH 4, FALLS-Falls Options-DOZER PLOW UNIT TO FIT FALLS OR JD SCARIFIER 2, FALLS-Falls Options-DOZER PLOW UNIT TO FIT FALLS PLS-1 1, FALLS-Falls Options-FLAT BACK ATTACHMENT HOOKS (PER PAIR SHIPPED LOOSE) FALLS-Falls Options-HDR PLOW UNIT/POCKET TO FIT FALLS FMS-1 SCARIFIER 2, FALLS-Falls Options-HYDRAULIC LOCKING PIN OPTION FOR PLS-1 1, FALLS-Falls Options-INSTALL HYDRAULIC LOCKING PIN OPTION FALLS-Falls Options-OPTIONAL HDR OSCILLATION PLT TO FOLLOW ROAD CONTOUR 1, FALLS-Falls Options-PIN ON STYLE HITCH. INSTALLED 3, FALLS-Falls Options-PLOW UNIT FOR V-PLOW TO FIT FALLS HUSTING HITCH 2, FALLS-Falls Options-PLOW UNIT FOR V-PLOW TO FIT FALLS PIN ON STYLE HITCH 2, FALLS-Falls Options-RUBBER DEFLECTOR FOR HDR PLOW FALLS-Falls Options-RUN HYDRAULIC LINES FROM VALVE TO HEAD PLATE FALLS-Falls Options-SCREW ADJ. MUSHROOM SHOES FOR HDR FALLS-Falls Options-TRIP EDGE OPTION FOR HDR PLOW 1, FALLS-Falls Options-V-PLOW LIFT HOOKS WELDED SOLID TO FIT PLS FALLS-Falls Options-V-PLOW LIFT HOOKS WITH OSCILLATION TO FIT PLS-1 1, FALLS-Falls Options-V-PLOW PLOW UNIT TO FIT JD OR FALLS SCARIFER 2, FALLS-FMS-1 -FRONT MOUNTED SCARIFER WITH 5 TEETH 5, FALLS-HDR-11-11' HEAVY DUTY REVERSIBLE SNOW PLOW 9, FALLS-PLS-1-PARA-LIFT (BALDERSON STYLE) LIFT GROUP. INSTALLED 4, FALLS--SCARIFER HEAD WITH LIFT HOOKS INSTALLED TO FIT PLS-1 3, FALLS -411H-12' ONE WAY SNOW PLOW 6, FALLS -Falls Options-34" WIDE HUSTING HITCH OPTION (ADD TO 29" PLOW UNIT) FALLS -Falls Options-34" WIDE HUSTING HITCH OPTION (ADD TO 29" PLOW UNIT) FALLS -Falls Options-411H HYDRAULIC MOLDBOARD TILT OPTION FALLS -Falls Options-411H LEFT HAND DISCHARGE OPTION FALLS -Falls Options-411H PLOW UNIT/HOOKS TO FIT FALLS PLS-1 1, FALLS -Falls Options-411H PLOW UNIT/POCKET TO FIT FALLS FMS-1 SCARIFIER 2, FALLS -Falls Options-411H SPRING TRIP TILTING BAR OPTION FALLS -Falls Options-411H TRIP EDGE OPTION 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 10 FT DOZER 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 11' REV. PLOW 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 1S' REV. PLOW 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 411H PLOW 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 8 FT DOZER FALLS -Falls Options-CARBIDE CUTTING EDGE FOR 9 FT DOZER 1, FALLS -Falls Options-CARBIDE CUTTING EDGE FOR HDR-12 1, FALLS -Falls Options-CURB SHOE (CYLINDRICAL) FOR REV. PLOW FALLS -Falls Options-CURB SHOE (WRAP AROUND STYLE) FOR REV. PLOW FALLS -Falls Options-HDR PLOW UNIT/HOOKS TO FIT FALLS PLS FALLS -Falls Options-PLOW UNIT FOR 411H TO FIT FALLS 29" HUSTING HITCH 1, FALLS -Falls Options-PLOW UNIT FOR 411H TO FIT FALLS PIN ON STYLE HITCH FALLS -Falls Options-PLOW UNIT FOR REV. PLOW TO FIT FALLS HUSTING HITCH 1, FALLS -Falls Options-PLOW UNIT FOR REV. PLOW TO FIT FALLS PIN ON STYLE HITCH FALLS -Falls Options-POLY WHEEL SYSTEM FOR 411H IN LIEU OF STD SKID SHOES 2, FALLS -Falls Options-POLY WHEEL SYSTEM FOR V-PLOW IN LIEU OF STD SKID SHOES 4,458

12 8.059 FALLS -Falls Options-REV. PLOW UNIT/HOOKS TO FIT FALLS PLS-1 1, FALLS -Falls Options-REV. PLOW UNIT/POCKET TO FIT FALLS FMS-1 SCARIFIER 2, FALLS -Falls Options-RUBBER BELT DEFLECTOR FOR 411H PLOW FALLS -Falls Options-RUBBER BELT DEFLECTOR FOR REV. PLOW FALLS -Falls Options-SNOW WHEEL SYSTEM FOR REV. PLOW 2, FALLS -Falls Options-TRIP CUTTING EDGE FOR PR SERIES PLOWS 1, FALLS -HDR-12-12' HEAVY DUTY REVERSIBLE SNOW PLOW 9, FALLS -PR1143E1-11' POWER REVERSIBLE SNOW PLOW 43" HIGH 7, FALLS -PR1155E1-11' POWER REVERSIBLE SNOW PLOW 55" HIGH 8, FALLS -PR1243E1-12' POWER REVERISBLE SNOW PLOW 43" HIGH 7, FALLS -PR1255E1-12' POWER REVERISBLE SNOW PLOW 55" HIGH 8, FALLS -TER-11A-11' TRIP EDGE POWER REVERSIBLE SNOW PLOW 42" HIGH 7, FALLS -TER-12A-12' TRIP EDGE POWER REVERSIBLE SNOW PLOW 42" HIGH 7, FALLS -V-100-V-PLOW 13'3" OVERALL WIDTH / 10/4" CLEARING WIDTH / 66" NOSE / 92" 9,060 DISCHARGE FALLS -V-890-V-PLOW 10'8" OVERALL WIDTH / 9'8" CLEARING WIDTH / 42" NOSE / 72" 7,325 DISCHARGE FALLS -V-90-V-PLOW 12'0" OVERALL WIDTH / 9'8" CLEARING WIDTH / 60" NOSE / 84" 7,498 DISCHARGE Monroe Eradicator-B , Monroe Eradicator-B , Monroe Eradicator-S , Monroe Eradicator-S , Freight to Henke to install snow equipment from Deere factory 2, Henke-50R11TT-50" tall, power reversible trip plow with tube table reversing frame 9, Henke-50R12TT-50" tall, power reversible trip plow with tube table reversing frame 9, Henke-AQC-Automatic Quick Coupler, Requires Hoses to Nose of Grader w/jrb Installation 6,875 in Davenport with hose kit and freight included Henke-DB10-Fixed Position Dozer Blade 6, Henke-DB8-Fixed Position Dozer Blade 6, Henke-DB9-Fixed Position Dozer Blade 6, Henke-FV-12-47" tall, folding vee plow 17, Henke-FV-14-47" tall, folding vee plow 18, Henke-FV-16-47" tall, folding vee plow 19, Henke-Henke standard hitch-henke Universal Hitch for Grader 3, Henke-HH10-41" tall, non-tripping, reversing dozer blade 9, Henke-HH8-41" tall, non-tripping, reversing dozer blade 8, Henke-HH9-41" tall, non-tripping, reversing dozer blade 9, Henke-Hi-Gate-Hydraulic End Gate 7, Henke-OWFA IS-One way snow plow, 39" intake, 52" discharge 7, Henke-OWFA IS-One way snow plow, 39" intake, 52" discharge 7, Henke-OWFA IS-One way snow plow, 39" intake, 52" discharge w/power reverse 8, Henke-PLG-Parallel Lift Group, Requires Hoses to Nose of Grader 6, Henke-PLH-Mounts to Henke or field "Balderson Style" Lift Group 1, Henke-PSS-Mounts to Henke or Factory Scarifier - Specify 1, Henke-REL 10-41" tall, tripping, heavy duty reversing blade 13, Henke-REL 12-41" tall, tripping, heavy duty reversing blade 14, Henke-REL 14-41" tall, tripping, heavy duty reversing blade 15, Henke-REL 16-41" tall, tripping, heavy duty reversing blade 16, Henke-SDDB 10-Severe Duty Dozer Blade, 48" tall, non-tripping, reversing dozer blade 14, Henke-SDDB 12-Severe Duty Dozer Blader, 48" tall, non-tripping, reversing dozer blade 14, Henke-SDDB 14-Severe Duty Dozer Blade, 48" tall, non-tripping, reversing dozer blade 14, Henke-SDDB 16-Severe Duty Dozer Blade, 48" tall, non-tripping, reversing dozer blade 15, Henke-STB-Scarifier (front mount), Requires Hoses to Nose of Grader 6, Henke-V-10-Vee Plow - 52" intake, 86" discharge, 10' cutting swath 10, Henke-V-9.5-Vee Plow - 40" intake, 68" discharge, 10' cutting swath 8, REAR ATTACHMENTS Offer rear attachment options. Starting with 9.1, 9.2, etc Rear Mounted Ripper/Scarifier Combination with Rear Hitch and Pin Includes Rear mounted Ripper/Scarifier with rear hitch and pin. NeverGrease Pin Joints. Three 2 x 5 in. Ripper Shanks w/teeth. Shanks w/teeth For Rear Ripper/Scarifier) 8,120 ntrol on t control Rear Counterweight with Rear Hitch and Pin 1600 lbs.(725.7 kg.) Rear Counterweight. Recommend for use with Front / Mid Scarifier. 1,211

13 Rear Hitch and Pin 233 Not for use with Rear Ripper/Scarifier No Rear Attachment AT Rear Scarifier Shanks (9) 725 Includes nine (9) each of shanks, retainers, and holders Handy Hitch-170-CR55-CONTOUR Accumulator & Hoses Handy Hitch-370-CR54-CAT Link Arms (Lift Assembly) Handy Hitch-370-PP04G-PROFILE Accumulator & Hoses 1, Handy Hitch-570-BP33G-BALLAST 16 Wheel Pull Style Heavy Duty Front A Frame 25, Handy Hitch-570-BP37G-BALLAST 12 Wheel Pull Style Heavy Duty Front A Frame 21, Handy Hitch-570-BP37GW-WATER BALLAST 12 Wheel Pull Style Heavy Duty Front A Frame 23, Handy Hitch-570-BP33GW-WATER BALLAST 16 Wheel Pull Style Heavy Duty Front A Frame 27, Handy Hitch-570-CR10-CONTOUR 75" Packer/Roller C/W Accumulator 21, Handy Hitch-570-CR12-CONTOUR 90" Packer/Roller C/W Accumulator 21, Handy Hitch-570-CR14-CONTOUR 105" Packer/Roller C/W Accumulator 23, Handy Hitch-570-CR18-CONTOUR 137" Packer/Roller C/W Accumulator 25, Handy Hitch-570-CR30-CONTOUR/PP Ripper Shanks 1, Handy Hitch-570-CR40-CONTOUR 24" PackerOffset 2, Handy Hitch-570-CR58-JOHN DEERE D Series Adapter Plate 2, Handy Hitch-570-CR59-JOHN DEERE G Series Link Arms (Lift Assembly) Handy Hitch-570-CR60-CHAMPION Adapter Plate 1, Handy Hitch-570-DC01D-Model 120 Ditch Cutter 23, Handy Hitch-570-DH10L-Model 10' LH 540/1000RPM 13, Handy Hitch-570-DH10R-Model 10' RH 540/1000RPM 13, Handy Hitch-570-DH15L-Model 15' LH 540/1000RPM 14, Handy Hitch-570-DH15R-Model 15' RH 540/1000RPM 14, Handy Hitch-570-GP01G-4'GRAVEL-PRO 20, Handy Hitch-570-GP01G-6'GRAVEL-PRO 21, Handy Hitch-570-GP01G-8'GRAVEL-PRO 22, Handy Hitch-570-HH02D-KOMATSU Rear Adaptor Plate 1, Handy Hitch-570-HH03D-VOLVO Lift Assembly/Offset 3, Handy Hitch-570-HH03G1-CAT 140,143,160,163 Lift Assembly/Offset 3, Handy Hitch-570-HH05G-CAT/John Deere Rear Ripper Lift Assembly/Offset 3, Handy Hitch-570-HP01-HANDY-PACKER 90" Single Roller C/W Accumulator Steel Roller 14,588 Grader Monted Handy Hitch-570-HP02-HANDY-PACKER 90" Single Roller Rubber Tire. C/W Accumulator 16,237 Grader Mounted Handy Hitch-570-MP01-SKID STEER 45" Packer/Roller 4, Handy Hitch-570-OR03R-Off Set Roller 90" Rubber Tire Drum 18, Handy Hitch-570-OR03S-Off Set Roller 90" Steel Drum 15, Handy Hitch-570-PP01G-PROFILE 90"Packer/Roller C/W Accumulator 23, Handy Hitch-570-PP02G-CAT 14M, 16M Lift Assembly/Offset 3, Handy Hitch-570-PP03G1-CAT 140,143,160,163 Lift Assembly/Offset 3, Handy Hitch-570-PP06G-JOHN DEERE 870GP Lift Assembly/Offset 3, Handy Hitch-570-QA01-PROFILE Quick Attach Option: Volvo, Cat, John Deere, Komatsu 2, Handy Hitch-570-SP03R-Single Rubber Tire Roller 120" 19, Handy Hitch-570-SP03S-Single Steel Drum Roller 120" 15, Handy Hitch-570-WR30E-CONTOUR Ripper Shank Extender Plates (REQD 24" OFFSET) Handy Hitch--OFFSET HITCH OPTIONS Skid Plate Option Handy Hitch--OFFSET HITCH OPTIONS 3 Point Hitch System 2, SIDE ATTACHMENTS Offer side attachment options. Starting with 10.1, 10.2, etc Fall A -12' ALL HYDRAULIC WING TALL POST 100" INSTALLED 13, Falls A - 14' ALL HYDRAULIC WING TALL POST 100" INSTALLED 13, Falls ASP - 12' ALL HYDRAULIC WING SHORT POST 66" INSTALLED 12, FALLS -2014ASP-14' ALL HYDRAULIC WING SHORT POST 66" INSTALLED 13, FALLS-W12-12' CABLE OPERATED SNOW WING INSTALLED 12, FALLS -W14-14' CABLE OPERATED SNOW WING INSTALLED 12, FALLS-Falls Options-HYDRAULIC ACCUMULATING BUFFER BRACE INSTALLED FALLS-Falls Options-HYDRAULIC ELEVATING REAR POST 1, FALLS -Falls Options-ADD FOR REAR POST WITH DEERE COUNTERWEIGHT INSTALLED 2, FALLS -Falls Options-RUN HOSES FOR 4TH FUNCTION ON GP GRADERS 1, FALLS -IM ' POSTLESS SNOW WING. INSTALLED 18, FALLS -IM ' POSTLESS SNOW WING. INSTALLED 18, Falls - HYDRAULIC EXTENDABLE BUFFER BRACE FOR IM3000 WINGS 2, Monroe - Option for rear ripper mount wing 15, Monroe - Option for rear ripper mount wing 15, Monroe - SnowHawk-12-HYD - 12' Snow Hawk motorgrader wing 16, Monroe - SnowHawk-12-HYD - 12' Snow Hawk motorgrader wing 16, Henke-AHW12FR-12' Grader Wing for Fixed Rear Applications 16, Henke-AHW12MR-12' Grader Wing for Manual Adjusting Rear Applications 16,640

14 Henke-AHW12RR-12' Grader Wing for Rear Ripper Applications 15, Henke-AHW12ER-12' Grader Wing for Elevating (Benching) Applications 17, Henke - 14' grader wing moldboard add 1, Henke - Trip edge option 1, Henke - Optional Torsion Trip Edge 1, OTHER ATTACHMENTS Offer other attachment options. Number starting with 11.1, 11.2, etc Mid-Mount Scarifier with Integrated Front Push Plate 7,356 Requires hydraulic code 6525 or 6526 Mid-Mount Scarifier with Push Block Can not be used with Front Scarifier. Not for use with Front Fenders Code T6Y5230 Tooth, T Shank ntrol on t control Slow Moving Vehicle (SMV) Sign (9) Extra Scarifier Shanks w/teeth For Rear Ripper/Scarifier 662 Requires Code 6810 Ripper/Scarifier (2) Extra Ripper Shanks w/teeth For Rear Ripper/Scarifier 559 Requires Code 6810 Ripper/Scarifier. OVERALL VEHICLE Non-Export Rust Preventive Coating Freight - Freight to and from Falls for installation 1, Falls Options - RUN HOSES FOR 4TH FUNCTION ON GP GRADERS Freight - Freight to Monroe for installation 1, Freight - Freight to Monroe for installation 1, Henke Options - AQC Coupler - Supply/Install 1, Henke Options - Balderson style hooks 1, Henke Options - Install dealer supplied coupler Henke Options - Mushroom shoes 1, Henke Options - Plow scarifier sockets 1, Henke Options - Trip Lockout option EXTENDED WARRANTY OPTIONS - SEE SPECIAL TERMS & CONDITIONS Offer performance/warranty options. Number these starting with 12.1, 12.2, etc. (Specify years, miles or hours extended term covers.) Comprehensive 24 Month 1000 Hour 1, Comprehensive 24 Month 1500 Hour 1, Comprehensive 24 Month 2000 Hour 1, Comprehensive 24 Month 2500 Hour 1, Comprehensive 24 Month 3000 Hour 1, Comprehensive 24 Month 4000 Hour 1, Comprehensive 24 Month 5000 Hour 2, Comprehensive 24 Month 6000 Hour 2, Comprehensive 24 Month 7000 Hour 3, Comprehensive 24 Month 7500 Hour 4, Comprehensive 36 Month 1000 Hour 1, Comprehensive 36 Month 1500 Hour 1, Comprehensive 36 Month 2000 Hour 1, Comprehensive 36 Month 2500 Hour 1, Comprehensive 36 Month 3000 Hour 1, Comprehensive 36 Month 4000 Hour 2, Comprehensive 36 Month 5000 Hour 2, Comprehensive 36 Month 6000 Hour 3, Comprehensive 36 Month 7000 Hour 4, Comprehensive 36 Month 7500 Hour 4, Comprehensive 48 Month 1000 Hour 2, Comprehensive 48 Month 1500 Hour 2, Comprehensive 48 Month 2000 Hour 2, Comprehensive 48 Month 2500 Hour 2, Comprehensive 48 Month 3000 Hour 2, Comprehensive 48 Month 4000 Hour 2, Comprehensive 48 Month 5000 Hour 3, Comprehensive 48 Month 6000 Hour 3, Comprehensive 48 Month 7000 Hour 4, Comprehensive 48 Month 7500 Hour 5, Comprehensive 60 Month 1000 Hour 2, Comprehensive 60 Month 1500 Hour 2, Comprehensive 60 Month 2000 Hour 2, Comprehensive 60 Month 2500 Hour 2, Comprehensive 60 Month 3000 Hour 3, Comprehensive 60 Month 4000 Hour 3, Comprehensive 60 Month 5000 Hour 3,760

15 Comprehensive 60 Month 6000 Hour 4, Comprehensive 60 Month 7000 Hour 5, Comprehensive 60 Month 7500 Hour 6, Comprehensive 72 Month 3000 Hour 3, Comprehensive 72 Month 4000 Hour 3, Comprehensive 72 Month 5000 Hour 4, Comprehensive 72 Month 6000 Hour 4, Comprehensive 72 Month 7000 Hour 6, Comprehensive 72 Month 7500 Hour 7, Comprehensive 84 Month 4000 Hour 4, Comprehensive 84 Month 5000 Hour 4, Comprehensive 84 Month 6000 Hour 5, Comprehensive 84 Month 7000 Hour 6, Comprehensive 84 Month 7500 Hour 7, Power Train And Hydraulics 24 Month 1000 Hours Power Train And Hydraulics 24 Month 1500 Hours Power Train And Hydraulics 24 Month 2000 Hours Power Train And Hydraulics 24 Month 2500 Hours Power Train And Hydraulics 24 Month 3000 Hours 1, Power Train And Hydraulics 24 Month 4000 Hours 1, Power Train And Hydraulics 24 Month 5000 Hours 1, Power Train And Hydraulics 24 Month 6000 Hours 1, Power Train And Hydraulics 24 Month 7000 Hours 2, Power Train And Hydraulics 24 Month 7500 Hours 2, Power Train And Hydraulics 24 Month 8000 Hours 2, Power Train And Hydraulics 24 Month 9000 Hours 3, Power Train And Hydraulics 24 Month Hours 4, Power Train And Hydraulics 36 Month 1000 Hours Power Train And Hydraulics 36 Month 1500 Hours Power Train And Hydraulics 36 Month 2000 Hours 1, Power Train And Hydraulics 36 Month 2500 Hours 1, Power Train And Hydraulics 36 Month 3000 Hours 1, Power Train And Hydraulics 36 Month 4000 Hours 1, Power Train And Hydraulics 36 Month 5000 Hours 1, Power Train And Hydraulics 36 Month 6000 Hours 1, Power Train And Hydraulics 36 Month 7000 Hours 2, Power Train And Hydraulics 36 Month 7500 Hours 2, Power Train And Hydraulics 36 Month 8000 Hours 3, Power Train And Hydraulics 36 Month 9000 Hours 4, Power Train And Hydraulics 36 Month Hours 5, Power Train And Hydraulics 48 Month 1000 Hours 1, Power Train And Hydraulics 48 Month 1500 Hours 1, Power Train And Hydraulics 48 Month 2000 Hours 1, Power Train And Hydraulics 48 Month 2500 Hours 1, Power Train And Hydraulics 48 Month 3000 Hours 1, Power Train And Hydraulics 48 Month 4000 Hours 1, Power Train And Hydraulics 48 Month 5000 Hours 1, Power Train And Hydraulics 48 Month 6000 Hours 2, Power Train And Hydraulics 48 Month 7000 Hours 2, Power Train And Hydraulics 48 Month 7500 Hours 3, Power Train And Hydraulics 48 Month 8000 Hours 3, Power Train And Hydraulics 48 Month 9000 Hours 4, Power Train And Hydraulics 48 Month Hours 5, Power Train And Hydraulics 60 Month 1000 Hours 1, Power Train And Hydraulics 60 Month 1500 Hours 1, Power Train And Hydraulics 60 Month 2000 Hours 1, Power Train And Hydraulics 60 Month 2500 Hours 1, Power Train And Hydraulics 60 Month 3000 Hours 1, Power Train And Hydraulics 60 Month 4000 Hours 1, Power Train And Hydraulics 60 Month 5000 Hours 2, Power Train And Hydraulics 60 Month 6000 Hours 2, Power Train And Hydraulics 60 Month 7000 Hours 3, Power Train And Hydraulics 60 Month 7500 Hours 3, Power Train And Hydraulics 60 Month 8000 Hours 4, Power Train And Hydraulics 60 Month 9000 Hours 5, Power Train And Hydraulics 60 Month Hours 6, Power Train And Hydraulics 72 Month 3000 Hours 2, Power Train And Hydraulics 72 Month 4000 Hours 2, Power Train And Hydraulics 72 Month 5000 Hours 2, Power Train And Hydraulics 72 Month 6000 Hours 2, Power Train And Hydraulics 72 Month 7000 Hours 3, Power Train And Hydraulics 72 Month 7500 Hours 4, Power Train And Hydraulics 72 Month 8000 Hours 4, Power Train And Hydraulics 72 Month 9000 Hours 5,961

16 Power Train And Hydraulics 72 Month Hours 7, Power Train And Hydraulics 84 Month 4000 Hours 2, Power Train And Hydraulics 84 Month 5000 Hours 2, Power Train And Hydraulics 84 Month 6000 Hours 3, Power Train And Hydraulics 84 Month 7000 Hours 3, Power Train And Hydraulics 84 Month 7500 Hours 4, Power Train And Hydraulics 84 Month 8000 Hours 5, Power Train And Hydraulics 84 Month 9000 Hours 6, Power Train And Hydraulics 84 Month Hours 7, Power Train 24 Month 1000 Hours Power Train 24 Month 1500 Hours Power Train 24 Month 2000 Hours Power Train 24 Month 2500 Hours Power Train 24 Month 3000 Hours Power Train 24 Month 4000 Hours Power Train 24 Month 5000 Hours Power Train 24 Month 6000 Hours Power Train 24 Month 7000 Hours 1, Power Train 24 Month 7500 Hours 1, Power Train 24 Month 8000 Hours 1, Power Train 24 Month 9000 Hours 2, Power Train 24 Month Hours 2, Power Train 36 Month 1000 Hours Power Train 36 Month 1500 Hours Power Train 36 Month 2000 Hours Power Train 36 Month 2500 Hours Power Train 36 Month 3000 Hours Power Train 36 Month 4000 Hours Power Train 36 Month 5000 Hours Power Train 36 Month 6000 Hours 1, Power Train 36 Month 7000 Hours 1, Power Train 36 Month 7500 Hours 1, Power Train 36 Month 8000 Hours 1, Power Train 36 Month 9000 Hours 2, Power Train 36 Month Hours 2, Power Train 48 Month 1000 Hours Power Train 48 Month 1500 Hours Power Train 48 Month 2000 Hours Power Train 48 Month 2500 Hours Power Train 48 Month 3000 Hours Power Train 48 Month 4000 Hours Power Train 48 Month 5000 Hours 1, Power Train 48 Month 6000 Hours 1, Power Train 48 Month 7000 Hours 1, Power Train 48 Month 7500 Hours 1, Power Train 48 Month 8000 Hours 2, Power Train 48 Month 9000 Hours 2, Power Train 48 Month Hours 3, Power Train 60 Month 1000 Hours Power Train 60 Month 1500 Hours Power Train 60 Month 2000 Hours Power Train 60 Month 2500 Hours 1, Power Train 60 Month 3000 Hours 1, Power Train 60 Month 4000 Hours 1, Power Train 60 Month 5000 Hours 1, Power Train 60 Month 6000 Hours 1, Power Train 60 Month 7000 Hours 2, Power Train 60 Month 7500 Hours 2, Power Train 60 Month 8000 Hours 2, Power Train 60 Month 9000 Hours 3, Power Train 60 Month Hours 4, Power Train 72 Month 3000 Hours 1, Power Train 72 Month 4000 Hours 1, Power Train 72 Month 5000 Hours 1, Power Train 72 Month 6000 Hours 1, Power Train 72 Month 7000 Hours 2, Power Train 72 Month 7500 Hours 2, Power Train 72 Month 8000 Hours 2, Power Train 72 Month 9000 Hours 3, Power Train 72 Month Hours 4, Power Train 84 Month 4000 Hours 1, Power Train 84 Month 5000 Hours 1, Power Train 84 Month 6000 Hours 1, Power Train 84 Month 7000 Hours 2,353