ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required)

Transcription

1 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Website: RDO Equipment Company Jesse Miller Dupont Avenue South Burnsville, Minnesota Version of Excel used: 2010 Furnish separate price quote for: 1.0 Articulating Wheel Loader Make & Model Horse Power/Engine Information Operating Weight Full Turn Static Tipping Load Recommended Bucket Type & Size (Stuck/Heaped) (SAE) Is bucket included with base unit? Break Out Force, bucket (SAE) Hinge Pin Height Articulation Angle Brake Type Transmission Type, Describe features Differential type, Front & Rear Seat type Battery CCA Tires Hydraulics Bucket Controls Alternator Size John Deere 644K Net Peak Power at 1,700 rpm 173 kw (232 hp) / John Deere PowerTech PVX 6090 / EPA Interim Tier 4/EU Stage IIIB kg (40,417 lb.) kg (28,393 lb.) General-Purpose with Bolt-on Edge / Heaped 3.2 m3 (4.25 cu. yd.) / Struck 2.8 m3 (3.7 cu. yd.) No kg (33,903 lb.) 4.12 m (13 ft. 6 in.) 80-deg. arc (40-deg. each direction) Service Brakes Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc Parking Brake Automatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc Countershaft-type PowerShift / Torque Converter Single stage, single phase Shift Control Electronically modulated, adaptive, load and speed dependent Operator Interface Steeringcolumn or joystick-mounted F-N-R and gear-select lever; kick-down button on hydraulic lever Shift Modes Manual/auto (1st D or 2nd D); quickshift button with 2 selectable modes: kick-down or kick-up/down; and 3 adjustable clutch-cutoff settings Shift Modes Manual/auto (1st D or 2nd D); quick-shift Hydraulic locking front with conventional rear Seat with backrest extension, deep foam, vinyl cover, and adjustable air suspension 2 12 volt) 950 CCA (each) 23.5R25 L3 1 Star XHA Michelin Radial Tires w/3 pc Rims Maximum Rated Flow at 6895 kpa (1,000 psi) and 2,350 rpm 310 L/m (82 gpm) 2-function valve, joystick control or fingertip controls, hydraulic-function enable/disable, optional 3rd- and 4th-function valve with auxiliary lever 24 volt with 100-amp Starting Aid Road & Work Lights Ether start aid & engine block heater Halogen driving lights with guards (2) / Front (4) and rear (2) cab work lights 1 Year parts and labor Warranty Details: Months, Years, Hours, etc BASE MACHINE PRICE $ 174, K Standard Gathering In Base

2 K Standard Waste Handler w/ Hi-Lift Boom * Requires codes: 0810 (1.02) 644K Standard Gathering Group 0914 (3.01) IT4 Engine 1110 (3.03) 4-Speed transmission without Lockup Torque Converter 1520 (3.09) Automatic Reversing Hydraulic Fan 1430 (3.07) Air Intake System with Centrifugal Precleaner 2020 (1.08) High Lift Loader Boom with Grease Pin Joints 3120 (3.14) Manual Axle Differential Lock 5560 (5.15) Less Front Fenders & Rear Platform with Close Mounted Steps 7120 (4.05) Heavy Duty LED Turn Signal & Marker Lights 8422 (2.10) Cab with Air Conditioning * Cannot order code 9125 (4.06) Beacon Bracket $ (5,910) K Standard Waste Handler w/ Hi-Lift Boom 0810 (1.02) 644K Standard Gathering Group 0914 (3.01) IT4 Engine 1110 (3.03)4-Speed transmission without Lockup Torque Converter 1520 (3.09) Automatic Reversing Hydraulic Fan 1430 (3.07) Air Intake System with Centrifugal Precleaner 2010 (1.06) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.14) Manual Axle Differential Lock 5560 (5.15) Less Front Fenders & Rear Platform with Close Mounted Steps 7120 (4.05) Heavy Duty LED Turn Signal & Marker Lights 8422 (2.10) Cab with Air Conditioning * Cannot order code 9125 (4.06) Beacon Bracket $ (4,137) Powerllel Forestry Application Package (1.10) or 2040 (1.11) Powerllel Linkage 2510 (2.07) Ride Control 5241 (5.08) 750/65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires with 5 pc. Rims 9061 (3.18) or 9063 (3.19) Axle Coolers 9140 (2.16) Fire Extinguisher 9410 (8.02) Transmission Access/Bottom Guards $ Z-Bar with Standard Greased Pin joints In Base Z-Bar with NeverGrease Pin joints. Requires code 1915 (8.08) $ 2, High Lift Loader Boom with Z-Bar (Adds inches height to bucket hinge pin fully raided. *Rated tipping load, breakout and lift capacity will be lower than unit equipped with the standard boom.) $ 3, High Lift Loader Boom with Z-Bar and NeverGrease Pin Joints (Adds inches height to bucket hinge pin fully raided. *Rated tipping load, breakout and lift capacity will be lower than unit equipped with the standard boom.) $ 6, Powerllel Ordered w/front Attachments. MUST BE ORDERED with code 8556 (7.02) Hi-Vis Coupler. $ 3, Powerllel Ordered w/o Front Attachments. CAN NOT be ordered with code 8556 (7.02) Hi-Vis Coupler or front attachments. $ 3,256 OPERATOR STATION

3 2.0 Use this section to offer operator station options, number the items starting with 2.1, 2.2, 2.3, etc., until you have listed all operator station options. Use as many numbers as you need Joystick Steering (Provides 2 steering systems with steering wheel and joystick. * Includes code 2210 (2.03) Seat. $ 2, Steering Wheel Only (Requires code 2220 (2.04) or 2230 (2.05) Seat. In Base Premium Heated, Leather/Fabric, High-Wide Back with Head Rest Extension, Air Suspension Seat with Left Hand Joystick Steering No Charge Air Suspension Seat In Base Premium Heated, Leather/Fabric, High-Wide Back with Head Rest Extension, Air Suspension Seat with Conventional Left Arm Rest $ Standard Vinyl, Back Rest Extension, Air Suspension Seat No Charge Ride Control $ 2, Less Ride Control Included ROPS Quiet Cab w/ Heater Included ROPS Quiet Cab w/ Heater, Air Conditioning $ 3, AM/FM/WB Radio Includes speakers and antenna. (Requires Code 9225 (4.08) Converter. $ AM/FM/WB Radio w/ CD Player Includes speakers and antenna. (Requires Code 9225 (4.08) Converter. $ Powered Cab Air Pre-Cleaner $ Heated Outside Mirrors $ Rear Camera and Radar Object Detection System. Display shows view behind the machine and provides audible alert. Rear view is displayed in standard LCD color monitor. (Requires Option Code 9225 (4.08). $ 2, Lb multi purpose (ABC) Dry Chemical Fire Extinguisher $ Embedded Payload Scale (Includes calibrations) Can not be used with codes 2050, 2060 or 2030 (1.10), 2040 (1.11) linkages. $ 4, Secondary Steering $ 1,432 ENGINE/POWER TRAIN 3.0 options, number these items starting with John Deere power Tech PVX 9.0L Interim Tier 4 Engine In Base Speed Transmission with Lock-up Torque Converter (Requires code 9050 (3.17) Spin Control) In Base Speed Transmission $ (1,648) Engine Muffler w/flat Black Exhaust Stack In Base Engine Muffler w/chrome Exhaust Stack $ Air Intake System w/o Precleaner Engine In Base Air Intake System w/precleaner Engine $ Standard Fan Drive In Base Reverse Fan Drive (Requires 1430 (3.07) $ Standard Fuel Tank and Line In Base Front Hydraulically Locking Differential & Rear Conventional Differential Axles In Base High Traction Front & Rear Hydraulically Locking Differential Axles $ 1, Automatic Axle Differential Lock Requires Transmission & Bottom guard code 9410 (8.02). $ Manual Axle Differential Lock In Base Engine Block Heater Included Quick Fluid Service w/environmental Drains and Sampling ports. (Coupling system for engine oil, transmission fluid, hydraulic fluid and engine coolant.) $ Wheel Spin Control System (1st Gear Only) $ Axle Coolers w/filtration Used w/secondary Steering (Requires code 9305 (2.18) Secondary Steering. $ 1, Axle Coolers w/filtration Used w/o Secondary Steering. Not for use with code 9305 (2.18)Secondary Steering. $ 1,086

4 ELECTRICAL/LIGHTS 4.0 number these items starting with 4.1, 4.2, 4.3, etc Amp Alternator In Base Amp Alternator for IT4 $ JDLink Ultimate In Base Turn Signal and Marker Lights Included Heavy Duty L.E.D. Turn Signal and Marker Lights $ Beacon Bracket $ Electrical Corrosion Prevention Level 1 Package (Preventive Corrosion treatment for all electrical & electronic connections) $ 1, Volt to 12 Volt-10 Amp Converter $ AT Amber Strobe Light (Cab roof mounted, gel filled & double flash) $ TIRES/RIMS Use this section to offer tire/rim options, number these items starting with 5.1, 5.2, 5.3, etc Less Wheels & Tires w/ 9 Degree Axle Stops $ (12,502) x25 3 pc. Rims Less Tires $ (9,674) /65R25 5 pc. Rims Less Tires $ (8,579) PR L3 Titan Bias Tires w/3 pc. Rims $ (3,147) R25 L3 1 Star XHA Michelin Radial Tires w/3 pc. Rims In Base R25 L3 1 Star VMT Bridgestone Radial Tires w/3 pc. Rims $ (1,312) R25 L3 1 Star Goodyear Radial Tires with 3 pc. Rims $ (164) /65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires w/5 pc. Rims $ 4, /70-25 L4 16PR Titan LS150 Logger Tread on 5pc Rims $ Tire Pressure Monitoring System. Not for use with codes 4000 (5.01), 4010 (5.02), 4011, 4012 (5.03) and $ Less Tire Pressure Monitoring System In Base Front Fenders In Base Full Coverage Front Fenders $ Full Front and Rear Fenders for Muddy Applications $ 1, Close Mounted Steps w/no Front Fenders or Rear Platform No Charge HYDRAULICS 6.0 Use this section to offer hydraulic options, number these items starting with 6.1, 6.2, 6.3, etc Two Function Joystick w/ FNR Control. Requires code 2120 (2.02) Conventional Steering. In Base Two Function Joystick w/ Steering Column FNR No Charge Two Function 2-Lever Fingertip Control & Steering Column FNR $ Three Function Joystick w/ FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. (Requires code 2120 (2.02) Conventional Steering. $ 1, Three Function Joystick w/ Steering Column FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. $ 1, Three Function 3-Lever Fingertip Control with Steering Column FNR & Auxiliary Control Lever for Third Function Includes auxiliary hydraulic lines to boom cross tube. $ 1, Function--4 Lever Finger Tip controls and Steering Column FNR. (1 lever controls boom, 1 lever controls bucket, 2 single levers control 2 additional auxiliary functions. Includes auxiliary hydraulic lines to boom cross tube. $ 2, AT Detent Kit for 3rd Function $ Hydraulic Control system for Attachment Coupler locking pins(use with Field Kit) $ 729 BUCKET/ATTACHMENTS 7.0 number these items starting with 7.1, 7.2, 7.3, etc Less Bucket w/ Bucket Pins In Base Hi-Vis Powerllel Hydraulic Attachment Coupler $ 4, Hi-Vis Z-Bar and High Lift Coupler $ 4, Hi-vis 60" Coupler fork Frame Carriage w/60" Tines. Requires code 8556 (7.02) or 8561(7.03) $ 4, Hi-vis 90" Coupler fork Frame Carriage w/72" Tines. Requires code 8556 (7.02) or 8561(7.03) $ 4, Pin On 4.25 Cu Yd GP Bucket w/ Bolt-On Cutting Edge $ 5, Pin On 4.25 Cu Yd GP Bucket w/ Teeth and Cutting Edge Segments $ 6, Cu Yd General Purpose Coupler Bucket with Bolt-on Edge $ 5, Cu Yd General Purpose Coupler Bucket with Teeth and Cutting Edge Segments $ 5,803

5 OTHER LOADER OPTIONS 8.0 number these items starting with 8.1, 8.2, 8.3, etc Manuals & Filters Included Transmission and Bottom Guards with Level 2 Sound Package Included $ 1, Lift Eyes. * Not for use with Code 9305 (2.18), Secondary Steering $ License Plate Bracket & Light $ Slow Moving Vehicle Emblem $ AT K Waste Handler Package Installed. Includes Rear Access Platforms w/flexible Steps, Hand Holds, and Tie Downs, Axle Seal Guards, Boom Cylinder Hydraulic Line & Cavity Guards, Bucket Cylinder Hydraulic Line/Rod/Sensor Guard, Articulation Joint Guards, Extreme service Flex Cab Entry Step, Extreme Service Transmission Side Guards, Extreme Service Loader Frame Front Cover, Extreme Service Guards for Loader Drive, work, and Turn Lights, Full Frontal Cab Window Guard, Rear Loader Frame Cover, 4th Gear disabled, Lockable Master Electrical disconnect Switch in Cab Floor, Strobe Light Right Rear Cab Roof Mounted, and Lower Boom and Bucket Grease Fitting Guards. $ 22, Steering Cylinder Greased In Base NeverGrease Steering Cylinder Joints In Base *Attachment Prices Valid with Purchase of Base Machine. Attachments Ordered Individually Subject to Freight and Installation Charges. ACS Couplers and Attachments 8.09 Pro2000 Series 60 Automatic Male Master - Installed $ 7, Pro1000Series 60 Automatic Male Master - Installed $ 8, Pro2000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1, Pro1000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1, Cu Yd Quick Coupler GP Bucket w/ BOE $ 8, Cu Yd 4-in-1 Bucket, w/boe (Requires Auxiliary Hydraulics) $ 19, Quick Coupler Standard Construction Duty Forks (Size 60), 18,000 Lbs Capacity, 3"x7"x72" Tines $ 13, Combo Coupler Fee - No Warranty $ 1,190 Falls Attachments & Valve Assemblies - Installed at Little Falls Machine, Inc Transportation of Machine to Little Falls Machine for Installation of Product $ 1,000 Falls Loader-Mounted Snow Wings *Note: Snow Wings with manual elevating push bar require two (2) double acting control valves. *Note: Snow Wings with optional hydraulic elevating push bar extension require one (1) additional double acting control valve. *Note: Falls can provide two different styles for the outer wing lift - specify when ordering LDL-8 8' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13, LDL-9 9' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13, LDL-10 10' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13, LDL-11 11' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 13, LDL-12 12' Front or Rear Loader Mounted Snow Wing - Does Not Include Hydraulics $ 14,019 Options for Loader Mounted Snow Wings 8.24 Trip Edge Option $ 1, Trip Moldboard Option $ 2, Hydraulic Push Bar Assembly w/nitrogen Cushioned Cylinder $ 2, Deduct w/o Factory Installation $ 2,731 Falls Loader-Mounted Power Reversible Snow Plows *Note: All Front-Mount Power Reversible Snow Plows require one (1) double acting control valve PR1143 Power Reversible Trip Blade Snowplow - (11' cutting edge, 43" high, includes pin-on loader arm adapter.) $ 6, PR1243 Power Reversible Trip Blade Snowplow - (12' cutting edge, 43" high, includes pin-on loader arm adapter.) $ 6, PR1155/PR1255 Raise Moldboard Height to 55" (add to respective plow) $ TER-11 Power Reversible Trip Blade Snowplow -(11' trip cutting edge, 42" high, includes pin-on loader arm adapter.) $ 6, TER12 Power Reversible Trip Blade Snowplow - (12' trip cutting edge, 42" high, includes pin-on loader arm adapter.) $ 6,783 Options for Power Reversible Snow Plows 8.33 Carbide Cutting Edge Per Foot $ Rubber Belt Snow Deflector (3/8" x 12") $ Steel Caster Wheel Assemblies $ 1, Pneumatic Caster Wheel Assemblies $ 1, Curb Shoe (Cylindrical) Price Each $ Curb Shoe (Wrap Around) Price Each $ Snow-Wheel System (In lieu of standard shoes) $ 2, JRB Adaptable Hooks (Per pair blanks) Installed $ 1, Trip Edge Assembly $ 1,064

6 Falls Loader-Mounted Heavy Duty Power Reversible Snow Plows *Note: All Front-Mount HD Power Reversible Snow Plows require one (1) double acting control valve HDR-11 Heavy Duty Power Reversible Snow Plow - (11' cutting edge, 48" high, includes pin-on loader arm adapter.) $ 8, HDR12 Heavy Duty Power Reversible Snow - (12' cutting edge, 48" high, includes pin-on loader arm adapter.) $ 8,825 Options for HD Power Reversible Snow Plows 8.44 Carbide Cutting Edge Per Foot $ Rubber Belt Snow Deflector (3/8" x 12") $ Moldboard Shoe (Included w/ standard equipment. *Note: Not available w/ trip edge assembly.) No Charge 8.47 Screw-Adjustable Mushroom Shoes (Set of Two (2)) $ Trip Edge Assembly (One-piece construction.) $ 1, JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Loader-Mounted One Way Plow H One Way Snow Plow (12' cutting edge, 36" nose, 66" discharge, includes pin-on loader arm adapter.) $ 6,141 Options for One Way Plow 8.51 Carbide Cutting Edge Per Foot $ Rubber Belt Snow Deflector (3/8" x 12") $ Heavy Duty Spring Trip Tilting Bar Assemblies $ Hydraulic Moldboard Tilt (* Requires additional hydraulic control.) $ Steel Caster Wheel Assemblies $ 1, Pneumatic Caster Wheel Assemblies $ 1, Left Hand Discharge $ Snow-Wheel System (In lieu of standard shoes) $ 1, JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Loader-Mounted V-Type Snow Plows 8.60 V-890 V-Type Snow Plow (116" cut, 53" nose, 72" discharge, includes pin-on loader arm adapter.) $ 6, V-90 V-Type Snow Plow (116" cut, 60" nose, 84" discharge, includes pin-on loader arm adapter.) $ 6, V-100 V-Type Snow Plow (124" cut, 64" nose, 92" discharge, includes pin-on loader arm adapter.) $ 8,219 Options for V-Type Plows 8.63 Spring-Loaded Steel Snow Deflectors (Std on Falls V-890) $ Rubber Belt Snow Deflector (3/8" x 12") $ Snow-Wheel System (In lieu of standard shoes.) $ 4, JRB Adaptable Hooks (Per pair blanks) Installed $ 1,248 Falls Hydraulic Valve Assemblies Purchase third & fourth function joystick controls provided by John Deere on the wheel loader SGL One Electronic Joystick Control w/one Diverter Valve $ 2, SGL One Electronic Joystick Control w/two Diverter Valves $ 4, SGL One Electronic Joystick Control w/three Diverter Valves $ 7,191 Henke Manufacturing Corporation Attachments Henke REL - Heavy Duty Reversible End Loader Snow Plow 8.70 REL10 10' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 12, REL12 12' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 13, REL14 14' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 14, REL16 16' Length, 41" Tall, Tripping, Reversing Blade (*Requires coupler & third function hydraulics) $ 15,725 Options for REL - Heavy Duty Reversible Snow Plow 8.74 Hydraulic Hi-Gate for REL (Includes diverter Kit) $ 6, Install Customer Supplied Coupler (Installation Only) $ ACS Coupler - Supplied and Installed by Henke Mfg Corp. $ 1, Mushroom Shoes - Pair $ 1, Trip Lockout Option $ 168 Henke SDDB - Severe Duty Dozer Blade 8.79 SDDB10 10' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13, SDDB12 12' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13, SDDB14 14' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 13, SDDB16 16' Width, 48" Tall, Non-Tripping, Reversing Dozer Blade (*Requires coupler & third function hydraulics) $ 14,148 Options for SDDB - Severe Duty Dozer Blade 8.83 Install Customer Supplied Coupler (Installation Only) $ Mushroom Shoes - Pair $ 1,066 Henke FV - Multi-Directional Folding Vee Snowplow 8.85 FV12 12' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 16, FV14 14' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 17,954

7 8.87 FV16 16' Length, 47" Tall, Folding Vee Plow, Includes Swivel (*Requires coupler & third & fourth function hydraulics) $ 18,973 Henke SWL - Snow Wing for Loaders 8.88 SWL10 10' Width for Mid-Mount or Combo - Add to either REL Reversible End Loader Snowplow or FV Folding Vee Snowplow (*Requires coupler & third & fourth function hydraulics) $ 10, SWL12 12' Width for Mid-Mount or Combo - Add to either REL Reversible End Loader Snowplow or FV Folding Vee Snowplow (*Requires coupler & third & fourth function hydraulics) $ 11,099 Options for SWL - Snow Wing for Loaders 8.90 Hydraulic Push Beam (*Requires double acting hydraulic function) $ 1, Torsion Trip Edge $ 1,936 Henke Hydraulic Kits (Assumes 4-Function Loader) th Function Hydraulic Kit $ 3, th & 6th Functions Hydraulic Kit $ 4,152 JRB Loader Couplers and Attachments HV Hydraulically Actuated Coupler - JRB Installed $ 5, HVNG Hydraulically Actuated Coupler NeverGrease - JRB Installed $ 6, HVPowerlell Hydraulically Actuated Coupler Powerlell - JRB Installed $ 5, QC425GPE 4.25 Cu Yd General Purpose Bucket w/boe $ 8, QC600CUF9672M Construction Utility Forks - Manual Tine Adjustment (96" carriage, 72" forks) $ 7, QC600CUF10660M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 60" forks) $ 7, QC600CUF10672M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 72" forks) $ 8, QC600UPF9660M Light Duty/Utility Pallet Forks - Manual Tine Adjustment (96" carriage, 60" forks. For light duty pallet use only.) $ 6, EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc. (Specify years, miles or hours extended term covers.) 9.01 Price: 9.02 Price: $ $

8 9.03 Price: 9.04 Price: $ 10.0 DELIVERY STARTING POINT City State Zipcode Delivery starting point - City, State, Zip Burnsville, MN Delivery starting point - City, State, Zip Grand Forks, ND Delivery starting point - City, State, Zip Marshall, MN Delivery starting point - City, State, Zip Moorhead, MN Delivery starting point - City, State, Zip North Mankato, MN Delivery starting point - City, State, Zip Rochester, MN Delivery starting point - City, State, Zip Sauk Rapids, MN Price per loaded mile Price: $ Minimum delivery charge: $ 350 $ NEW EQUIPMENT RENTAL PROGRAM 11.0 offered, with the option to purchase, list the Hourly Rental Rate: NA Weekly Rental Rate: $ 2,450 Monthly Rental Rate: $ 7,350 Percent (%) of Rental Fee applied to purchase price: 90% If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: NA VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM 12.0 See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ HOURLY SHOP RATE $ 108 PER HOUR (Installation services may be requested on an "as needed" basis)