ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required)

Transcription

1 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Website: RDO Equipment Company Jesse Miller Dupont Avenue South Burnsville, Minnesota Version of Excel used: 2010 Furnish separate price quote for: 1.0 Articulating Wheel Loader Make & Model Horse Power/Engine Information Operating Weight Full Turn Static Tipping Load Recommended Bucket Type & Size (Stuck/Heaped) (SAE) Is bucket included with base unit? Break Out Force, bucket (SAE) Hinge Pin Height Articulation Angle Brake Type Transmission Type, Describe features John Deere 724K Net Peak Power at 1,800 rpm 197 kw (264 hp) / John Deere PowerTech PVX 6090 / EPA Interim Tier 4/EU Stage IIIB kg (43,127 lb.) kg (28,620 lb.) General-Purpose with Bolt-on Edge / Heaped 3.1 m3 (4.0 cu. yd.) / Struck 2.4 m3 (3.2 cu. yd.) No kg (32,019 lb.) 4.12 m (13 ft. 6 in.) 80-deg. arc (40-deg. each direction) Service Brakes Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc Parking Brake Automatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc Countershaft-type PowerShift / Torque Converter Single stage, single phase Shift Control Electronically modulated, adaptive, load and speed dependent Operator Interface Steering-column or joystick-mounted F-N-R and gearselect lever; quick-shift button on hydraulic lever Shift Modes Manual/auto (1st D or 2nd D); quick-shift button with 2 selectable modes: kick-down or kickup/down; and 3 adjustable clutch-cutoff settings Hydraulic locking front with Differential type, Front & Rear conventional rear Seat type Seat with backrest extension, deep foam, fabric cover, and adjustable air suspension Battery CCA (2 12 volt) 1,400 CCA (each) Tires 23.5R25 L3 1 Star Michelin Tires w/3 pc. Rims Hydraulics Maximum Rated Flow at 6895 kpa (1,000 psi) and 2,250 rpm 310 L/m (82 gpm

2 Bucket Controls Alternator Size 2-function valve, joystick control or fingertip controls, hydraulic-function enable/disable, optional 3rd- and 4th-function valve with auxiliary lever 24 volt with 100-amp Starting Aid Road & Work Lights Ether start aid & engine block heater Halogen driving lights with guards (2) / Front (4) and rear (2) cab work lights 1 Year parts and labor Warranty Details: Months, Years, Hours, etc BASE MACHINE PRICE $ 200, K Loader In Base K Standard Waste Handler w/standard Z-Bar Linkage and Hi-Lift Boom NOTE: * Requires AT (8.11) 724K IT4 Waste Handler Package Installed. * Does not include bottom guards; see GR Mfg in the Referral Attachments Section. * Requires codes: 0810 (In Base) 724K Standard Gathering Group 0914 (In Base) IT4 Engine 1110 (3.02) 4-Speed transmission without Lockup Torque Converter 1520 (3.14) Automatic Reversing Hydraulic Fan 1430 (3.12) Air Intake System with Centrifugal Precleaner 2010 (1.05) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.08) Manual Axle Differential Lock 5570 (8.06) No Fenders # must have this code added to code sheet 7120 (4.06) Heavy Duty LED Turn Signal & Marker Lights * Cannot order code 9125 (4.07) Beacon Bracket $ (5,128) K IT4 Waste Handler with Standard Z-Bar Linkage & Boom NOTE: * Requires AT (8.11) 724K IT4 Waste Handler Package Installed. * Does not include bottom guards; see GR Mfg in the Referral Attachments Section. * Requires codes:0810 (In Base) 724K Standard Gathering Group 0914 (In Base) IT4 Engine 1110 (3.02) 4-Speed transmission without Lockup Torque Converter 1520 (3.14) Automatic Reversing Hydraulic Fan 1430 (3.12) Air Intake System with Centrifugal Precleaner 2010 (1.05) Standard Z-Bar Boom with Grease Pin Joints 3120 (3.08) Manual Axle Differential Lock 5570 (8.06) No Fenders # must have this code added to code sheet 7120 (4.06) Heavy Duty LED Turn Signal & Marker Lights * Cannot order code 9125 (4.07) Beacon Bracket $ (5,128) Z-Bar with Standard Greased Pin Joints In Base Z-Bar with NeverGrease Pin Joints $ 3, High Lift Loader Boom and Z-Bar Linkage (Adds In Height to Bucket Hinge Pin. Rated Tipping Load, Breakout and Lift Capacity will be lower than Standard boom. $ 3, High Lift Loader Boom and Z-Bar Linkage and NeverGrease Pin Joints (Adds In Height to Bucket Hinge Pin. Rated Tipping Load, Breakout and Lift Capacity will be lower than Standard boom. $ 6,439 OPERATOR STATION 2.0 Use this section to offer operator station options, number the items starting with 2.1, 2.2, 2.3, etc., until you have listed all operator station options. Use as many numbers as you need Joystick Steering (Provides 2 Steering systems with steering wheel and joystick. Includes code 2.03) $ 2, Steering Wheel Only Requires code 2220 (2.04) or 2230 (2.05) Seat. In Base Premium Heated, Leather/Fabric, High-Wide Back with Head Rest extension, Air Suspension Seat with Left Hand Joystick Steering. Seat included in code 2110 (2.01 Joystick Steering $ 551

3 Standard Fabric, Back Rest Extension, Air Suspension Seat for Conventional Steering In Base Premium Heated, Leather/Fabric, High-Wide Back with Head Rest extension, Air Suspension Seat with Conventional Left Arm Rest. $ AM/FM/WB Radio Includes speakers and antenna $ AM/FM/WB Radio w/cd Player Includes speakers and antenna $ Powered Cab Air Pre-cleaner $ Automatic Ride Control with Adjustable Speed Settings In Base Standard Outside Mirrors In Base Heated Outside Mirrors $ Secondary Steering $ 1, Rear Camera and Radar Object Detection System (Rear view is displayed in the standard LCD monitor. $ 2,420 ENGINE/POWER TRAIN 3.0 Use this section to offer engine and powertrain options, number these items starting with 3.1, 3.2, 3.3, etc Speed Transmission with Lock-up Torque Converter In Base Speed Transmission $ (1,696) Standard Fuel Tank and Lines In Base Front Hydraulically Locking Differential & Rear Conventional Differential Axles In Base Front & Rear Hydraulically Locking Differential Axles $ 1, Automatic Axle Differential Lock Requires Bottom guard code 9410 (3.18). $ Manual Axle Differential Lock In Base Chrome Exhaust $ Automatic Ether Starting Aid Included Engine Block Heater Included Centrifugal Engine Air Pre-cleaner $ Quick Fluid Service w/environmental Drains and Sampling Ports (Coupling system for engine oil, transmission fluid, hydraulic fluid, and engine coolant) $ Automatic Reversing Fan Drive. Requires code 1430 (3.12) $ Axle Coolers w/filtration Used w/secondary Steering Requires code 9305 (2.12) Secondary Steering. $ 1, Axle Coolers w/filtration Used w/o Secondary Steering. Not for use with code 9305 (2.12) Secondary Steering. $ 1, NeverGrease Rear Axle Oscillation and Steering Cylinder Joints In Configuration Transmission and Bottom Guards with Level 2 Sound Package Included. * Can not be used with Code 9305 (2.12), Secondary Steering $ 1, Cab with Air A/C Charge In Base

4 4.0 ELECTRICAL/LIGHTS Use this section to offer electrical/light options, number these items starting with 4.1, 4.2, 4.3, etc Two Heavy Duty Batteries (Each w/ 1400 CCA & 440 Minute Reserve) In Base 4.02 Lockable Master Electrical Disconnect Switch In Base JDLink Ultimate Machine Monitoring System with 3 Year Message Service (USA and Canada only) In Base Front and 2 Rear Work Lights, 2 Halogen Driving Lights with Guards, 1 Engine Compartment Light, Turn Signals and Flashers, and LED Stop and Tail Lights In Base Turn Signal and Marker Lights In Base Heavy Duty LED Turn Signal and Marker Lights $ Beacon Bracket $ Embedded Payload Scale (Includes calibration) $ 4, Electrical Corrosion Prevention Level 1 Package (Preventive Corrosion treatment for all electrical & electronic connections) $ 1, Amp Alternator In Base amp Alternator with A/C $ AT Amber Strobe Light (Cab roof mounted, gel filled & double flash) $ 766 TIRES/RIMS 5.0 Use this section to offer tire/rim options, number these items starting with 5.1, 5.2, 5.3, etc Less Wheels & Tires w/ 9 Degree Axle Stops (Required for rear axle warranty if using solid tires) $ (13,430) x25 3 pc. Rims Less Tires $ (11,981) /65R25 5 pc. Rims Less Tires $ (11,342) PR L3 Titan Bias Tires w/3 pc. Rims $ (2,701) R25 L3 1 Star XHA Michelin Radial Tires w/3pc. Rims In Base R25 L3 1 Star VMT Bridgestone Radial Tires w/3 pc. Rims $ (1,350) R25 L3 1 Star Goodyear Radial Tires with 3 pc. Rims $ (168) /65R25 L3 Low Profile 1 Star XLD Michelin Radial Tires w/5 pc. Rims $ 4, /70-25 L4 16PR Titan LS150 Logger Tread on 5pc Rims $ Tire Pressure Monitoring System. Not for use with codes 4000 (5.01), 4010, 4011 (5.02), 4012 (5.03) $ Less Tire Pressure Monitoring System In Base 6.0 HYDRAULICS Use this section to offer hydraulic options, number these items starting with 6.1, 6.2, 6.3, etc Automatic Return to Dig, In cab Adjustable Automatic Boom Height Kick out, and Return to Carry. In Base Two Function Joystick w/ FNR Control Requires code 2120 (2.02)Conventional Steering. $ Two Function Joystick w/ Steering Column FNR $ Two Function 2-Lever Fingertip Control & Steering Column FNR In Base Three Function Joystick w/ FNR & Auxiliary Control Lever for Third Function Requires code 2120 (2.02) Conventional Steering. (Includes auxiliary lines to boom cross tube) $ 1, Three Function Joystick w/ Steering Column FNR & Auxiliary Control Lever for Third Function (Includes auxiliary hydraulic lines to boom cross tube) $ 1, Three Function 3-Lever Fingertip Control w/steering Column FNR & Auxiliary Control Lever for Third Function (Includes auxiliary hydraulic lines to boom cross tube) $ 1, Function-4 Lever Finger Tip Controls and Steering Column FNR. (Includes auxiliary hydraulic lines to boom cross tube) $ 2, AT Detent Kit for 3rd Function $ Hydraulic Control System for Quick Coupler Locking Pins (For use with field installed quick coupler. Includes hydraulic lines from control valve to loader boom cross tube, electric switch and solenoid valve) $ 750

5 7.0 BUCKET/ATTACHMENTS Use this section to offer these options, number these items starting with 7.1, 7.2, 7.3, etc Less Bucket w/ Bucket Pins Included Cu Yd GP Bucket w/ Heavy Duty Bolt-On Cutting Edge $ 5, Cu Yd GP Bucket w/ Teeth and Cutting Edge Segments $ 6, Cu Yd GP Bucket w/ Jagz Cutting Edges $ 6, Hi-Vis Z-Bar and High Lift Coupler $ 4, Hi-Vis 60" Fork Frame w/60" Tines $ 4, Hi-Vis 90in Coupler Fork frame w/72 in. tines $ 4, Cu Yd General Purpose Coupler BucketW/Teeth and Cutting edge segments $ 5, Hi-Vis 4 Cu Yd Bucket w/bolt on Cutting Edge $ 5, Cu. Yd. (3.3 Cu. M.) General Purpose Bucket with Bolt-on Cutting Edge $ 5, Cu. Yd. (3.3 Cu. M.) General Purpose Bucket with Teeth and Cutting Edge Segments $ 6,206 OTHER LOADER OPTIONS 8.0 Use this section to offer front attachment options, number these items starting with 8.1, 8.2, 8.3, etc Manuals & Filters Included Full coverage Front Fenders In Base Full Tire Front & Rear Fenders for Muddy Applications $ 1, No Front Fenders Waste Handler. Requires code 1025 (1.03) or 1045 (1.04) In Base Fire Extinguisher $ Lift Eyes $ License Plate Bracket & Light $ Slow Moving Vehicle Emblem $ AT K IT4 waste Handler Pachage $ 22,191 *Attachment Prices Valid with Purchase of Base Machine. Attachments Ordered Individually Subject to Freight and Installation Charges. ACS Couplers and Attachments 8.12 Pro2000 Series 60 Automatic Male Master - Installed $ 7, Pro1000 Series 60 Automatic Male Master - Installed $ 7, Pro2000 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1, Pro100 Blank Female Adapter Pro-Series 60 for Attachments, Brooms, and Plows (Customer Responsible for Installation) $ 1, Cu Yd X 120" Quick Coupler GP Bucket w/ BOE $ 9, Quick Coupler Standard Construction Duty Forks (Size 60), 18,000 Lbs Capacity, 3"x7"x66" Tines $ 10, Combo Coupler Fee - No Warranty $ 1, Yd Multi Purpose 4-in-1 Bucket $ 18,154 JRB Loader Couplers and Attachments HV Hydraulically Actuated Coupler - JRB Installed $ 5, HVG Hydraulically Actuated Coupler NeverGrease - JRB Installed $ 4, QC475GPE 4.75 Cu Yd General Purpose Coupler Bucket w/boe $ 10, QC600CUF10672M Construction Utility Forks - Manual Tine Adjustment (106" carriage, 72" forks) $ 9, QC325MPE 3.25 yd Multi Purpose Bucket w/boe( requires 3rd Function) $ 15, QC500GBE 5 Yd Grapple Bucket w/ BOE Spec Full/Half Cut or full cut away(requires 3rd Function) $ 17, QC600PDc9560 Paddle Top Clamp Forks(95" Carriage, 60" Forks)Requires 3rd Function $ 17, QC600EB13'7 3- section Extendable Boom w/hook 13'7" EXT $ 4,189 EXTENDED WARRANTY OPTIONS 9.0 Use this section to offer performance/warranty options, number these items starting with 9.1, 9.2, 9.3, etc.

6 (Specify years, miles or hours extended term covers.) 9.01 Price: 9.02 Price per loaded mile Price: $ 9.03 Price per loaded mile Price:

7 9.04 Price per loaded mile Price: DELIVERY STARTING POINT 10.0 City State Zipcode Delivery starting point - City, State, Zip Burnsville, MN Delivery starting point - City, State, Zip Grand Forks, ND Delivery starting point - City, State, Zip Marshall, MN Delivery starting point - City, State, Zip Moorhead, MN Delivery starting point - City, State, Zip North Mankato, MN Delivery starting point - City, State, Zip Rochester, MN Delivery starting point - City, State, Zip Sauk Rapids, MN Price per loaded mile Price: $ Minimum delivery charge: $ NEW If rental EQUIPMENT programs RENTAL are available PROGRAM on the new equipment offered, with the option to purchase, list the Hourly Rental Rate: NA Weekly Rental Rate: $ 2, Monthly Rental Rate: $ 8, Percent (%) of Rental Fee applied to purchase price: 90% If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: NA

8 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM 12.0 See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ HOURLY SHOP RATE $ 108 PER HOUR (Installation services may be requested on an "as needed" basis)