EDM-700/760/800/900/930 & 450 SYSTEM PRICE LIST
|
|
- Giles McDonald
- 6 years ago
- Views:
Transcription
1 EDM-700/760/800/900/930 & 450 SYSTEM PRICE LIST Effective February 1, 2013 ALL EDM SYSTEMS are TSO d and INCLUDES as free: LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak....included Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate included Voltage, For alternator failure, monitored for over and under voltage with alarms..... included Pilot Programmable Hi &Lo alarm limits. ALL programming from front panel included All EDM s TSO d for quality with a 3 yr. Warranty Electronics and 1yr. Probes...included Quick response probes, fastest accurate readings, harness and hardware... included Data Memory, reading once every 2 to 255 seconds...included EZPlot-1 program for plotting and downloading data.....included USB download port built in with memory stick.new on 730/830/900 included Full color TFT screen 4 inches Diagonal NEW on 730/830/900 included SINGLE Engine EDM-700/800, 4,6,7,8,9 Cyl. Part Number List Price EDM 700-4C 4 cylinder (4-EGT and 4-CHT) $1,848 EDM 700-6C 6 cylinder (6-EGT and 6-CHT) $2,395 EDM 700-7C 7 cylinder (7-EGT and 7-CHT) $2,595 EDM 700-8C 8 cylinder (8-EGT and 8-CHT) $2,995 EDM 700-9C 9 cylinder (9-EGT and 9-CHT) $3,295 EDM 800-4C 4 cylinder with %HP/FF/OAT/MAP/RPM $3,470 EDM 800-6C 6 cylinder with %HP/FF/OAT/MAP/RPM $4195 Fuel Flow option for EDM-700 s, Complete with 201 Transducer (flow to 45 GPH) $ 630 Fuel Flow Electronics option for EDM-700 s, functions with any digital transducer $ 394 EDM 711 primary for CHT-OIL and TIT add $420 to the above prices for each primary $ 420 Bigger 3 Display for all above instruments add $368 to above prices $ 368 Classic Scanner 100-4C 4 cyl. 4 EGT and 4 CHT, 8 probes Digital Temp ONLY $ 995 Classic Scanner 100-6C 6 cyl. 6 EGT and 6 CHT, 12 probes Digital Temp ONLY $1,295
2 EDM-730 EDM-830 SINGLE Engine EDM-730/830, 4,6,7,8,9 Cyl Part Number List Price EDM-730-4C 4 cylinder (4-EGT and 4-CHT) + USB $2,245 EDM-730-6C 6 cylinder (6-EGT and 6-CHT) + USB $3,038 EDM-730-7C 7 cylinder (7-EGT and 7-CHT) + USB $3,295 EDM-730-8C 8 cylinder (8-EGT and 8-CHT) + USB $3,715 EDM-730-9C 9 cylinder (9-EGT and 9-CHT) + USB $4,030 EDM-830-4C 4 cyl with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure + USB $4,135 EDM-830-6C 6 cyl with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure + USB $4,660 EDM-830-7C 7, cyl. with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure,usb $4,745 EDM-830-8C 8, cyl. with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure,usb $5,045 EDM-830-9C 9, cyl. with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure,usb $5,345 EXPERIMENTAL ONLY EDM-740 EDM-740-4C 4 cyl with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure $3,199 EDM-740-6C 6 cyl with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure $3,450 EDM-740-9C 9 cyl with %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure $5,525 PN Fuel Level, Left / Right tank, Fuel Pressure (Carb /Injected) and AMPS (100) $ 263 PN Air Bottle Pressure 1000 psi only $ 500 PN Fuel Level, Fuel Pressure, AMPS plus Air Bottle Pressure $ 770 TRADE-IN EDM 700/800 to an EDM-730/830 for Indicator only. Does not apply to GEM trade in. ( Use old system wire harness and EGT/CHT/TIT probes) $1350 Twin TRADE-IN from a EDM-760 to EDM-751 (Two EDM-730 s) $2600
3 EDM OPTIONS (can be added at any time) for singles and twins. You do not have to send the instrument back, everything is plug and play Item Description List price 1. ADD RPM kit to EDM-700/730 $ ADD OIL pressure kit to EDM-700/800 and 730 $ ADD Manifold pressure kit to EDM-700-9C and 730 $ Manifold/RPM/Oil Pressure harness for EDM series $ Oil Temperature 5/8-18 thread Primary $ OAT, Outside Air Temperature System $ IAT/CDT Induction air, Compressor Temp, and Carb Carburetor Temp. $ 195 ea 8. CHT gasket M-113-3/8 probe (JPI CHT to coexist with Factory bayonet probe or Heaters) $ EGT or CHT Kit with hardware $ MAP/Oil Pressure/Fuel Pressure (non Turbocharged) for 900 Primary Series $ 782 ea 11. Fuel Pressure with upper/lower deck pressure (differential) for 900 Primary Series $ Additional PRIMARY functions of CHT, OIL Temp. or TIT For EDM-711 $ 420 ea Fuel Flow option (Gal/Hr), Without transducer, Harness included $ Fuel Flow option (Gal/Hr), With transducer (201 or 231) Harness included $ Fuel Flow option (Gal/Hr), Without transducer Harness included $ Fuel Flow option (Gal/Hr), With transducer (201 or 231) Harness included $ High flow transducer for some 9 cyl. ( 6 to 120 GPH ) TSO d. Larger available, call $ Extra High fuel flow FT6-8AEXS-LEA-2022 max capacity 6 to 240 gph $ EZTRENDS Graphing/download, program, Same program EI charges $125 FREE 20. USB Download box with memory stick for 700/800 only. No laptop required. $ USB integrated into old or new EDM 700/800. W/ Memory stick. No laptop required $ Convert to 3 Display for 4,6,7,8,9 cyl on new order or update old instrument $ Experimental package Fuel Level, Fuel Pressure and AMPS. $ Experimental package Fuel Level, Fuel Pressure and AMPS and Bottle Pressure $ Experimental package with Bottle Pressure. $ Carbon Monoxide Detector: by CO Guardian, Unit also provides Cabin Pressure (altitude) and Cabin Temperature. $ 459ND 26. Real-Time Data Out: RTDO, provides telemetry data for UAV's, racers and other applications. $ Software upgrade all models $100 Trade-in Price for a Basic GEM to an EDM-700 ( Use old system wire harness and EGT/CHT/TIT probes) $1300.
4 FS-450 Fuel flow instrument, twice the info of FP-5L With GPS interface, FlowScan Transducer and Fire sleeve, purchase fittings separately to fit your engine. See below. PART NUMBER DESCRIPTION PRICE PN No transducer, indicator and harness only $ 523 PN G All gravity Flow installations without fuel pump. $ 853 PN P All Fuel injected engines with fuel pump $ 853 PN R Rotax engine 2-30 GPH Single transducer $1,095 PN H High flow, range up to 120 GPH. $1,503 PN D Pressure Carburetor engines with vapor return lines. Requires Dual transducers. $1,095 PN M Twin Fuel Flow, Single Display w/two transducers 2 or 3 inch display $1,755 PN AN Qt 2 AN816-4 hose to ¼ NPT steel fittings, most Continentals $ 11 PN AN Qt 2 AN816-6 hose to ¼ NPT steel fittings, most Lycoming $ 11 PN 816 Fiberglass sleeve 1.5 x 8 $ 16 Single Fuel Flow FS-450 Twin Fuel Flow FS-450M
5 Foot print 4 x 5 NEW EDM-900 Primary Pricing for SINGLE engine Standard 3 hole required for installation Same as EDM-830 Part Number TSO & STC Primary approved to replace all engine gauges AML go to JPITECH.com Fuel Quantity probes not included Now one price for Exp., TSO, Primary EDM-900 systems. List Price 900-4CP-0 4 Cyl. For NO tanks Primary package. $6, CP CP CP CP CP CP CP-4 4 Cyl. For L/R 2 tanks setup complete Primary package. 4 Cyl. For L/R and Aux 4 tanks setup complete Primary package. 6 Cyl. For NO tanks Primary package 6 Cyl. For L/R 2 tanks setup complete Primary package. 6 Cyl. For L/R and Aux 4 tanks setup complete Primary package. 7 Cyl. For L/R and Aux 4 tanks setup complete Primary package. 8 Cyl. For L/R and Aux 4 tanks setup complete Primary package. $6,179 $6,773 $6,290 $6,707 $7,329 $7,783 $8, CP-4 9 Cyl. For L/R and Aux 4 tanks setup complete Primary package. $8, D May be used to display parameters in a second location. $3,145 Experimental Special Experimental discount from above prices SPECIAL for non TSO or STC - $1000
6 EDM-930 Primary Pricing for SINGLE engine Part Number 930-4CP CP CP-4 TSO & STC Primary approved to replace all engine gauges AML go to JPITECH.com Fuel Quantity probes not included 4 Cyl. Without tanks Primary package. 4 Cyl. For L/R 2 tanks setup complete Primary package. 4 Cyl. For L/R and Aux 4 tanks setup complete Primary package. List Price $6,217 $6,618 $7, CP-0 6 Cyl. Without tanks Primary package $6, CP-2 6 Cyl. For L/R 2 tanks setup complete Primary package. $7, CP-4 6 Cyl. For L/R and Aux 4 tanks setup complete Primary package. $7, CP 7Cyl. For L/R and Aux 4 tanks setup complete Primary package. $8, CP 8 Cyl. For L/R and Aux 4 tanks setup complete Primary package. $8, CP 9 Cylinder complete Primary package, includes a high flow fuel transducer to 125 GPH TSO & STC $10, D May be used to display parameters in a second location. $3,145 Experimental Special Experimental discount from above prices SPECIAL for non TSO or STC - $1000
7 EDM-960 Primary Pricing for TWIN engine Part Number 960-4CP CP CP-4 TSO & STC Primary approved to replace all engine gauges see JPI AML on web site JPITECH.com Fuel Quantity probes not included 4 Cyl. Without tanks Primary package 4 Cyl. For L/R 2 tanks setup complete 4 Cyl. For L/R and Aux 4 tanks setup complete List Price $15,425 $16,055 $17, CP-0 6 Cyl. Without tanks Primary package. $16, CP-2 6 Cyl. For L/R 2 tanks setup complete $17, CP-4 6 Cyl. For L/R and Aux 4 tanks setup complete $18, CP 7Cyl. For L/R and Aux 4 tanks setup complete $18, CP 8 Cyl. For L/R and Aux 4 tanks setup complete $19, CP 9 Cylinder complete., includes a high flow fuel transducer to 125 GPH TSO & STC $23,770 SATISFACTION GUARANTEED: JPI purchased Kits returned in 30 days from invoice date in original box unused, no questions asked. No restocking fee. 15% restocking fee for kits returned after 30 days unused. No returns after 6 months. Prices subject to change without notice. J.P. INSTRUMENTS, inc. PO BOX 7033,Huntington Beach CA Tel: , JPI (ALL States), FAX: (714)
8 Twin Engine EDM-760 and EDM-851 Advisory instruments Come with 20 ft harness & special Synchronizer harness. Please note the EDM-730/830 comes with 8 ft harness on all sensors only twins require 20 ft minimum. EDM-850 Twin EDM-760 twin 3 1/8 EDM-851 Left Display Twin Right Display Left Display Right Display TWIN Engine, EDM-760 one instrument 3 1/8 display: EDM-760-4C (4-EGT and 4-CHT per engine + Memory, 16 probes) $3,695 EDM-760-6C (6-EGT and 6-CHT per engine + Memory, 24 probes) $4,695 Fuel Flow option with two transducers $1,490 Fuel Flow option without transducers $1,000 Options available: Second TIT, OAT, Carb. and Oil $195. TWIN Engine, Two instruments, EDM-751/851 two EDM-730/830 fits into 3.12 ea. EDM-751-4C (4-EGT and 4-CHT per engine + Memory, 16 probes) $4,590 EDM-751-6C (6-EGT and 6-CHT per engine + Memory, 24 probes) $5,900 EDM-851-4C (4-EGT/CHT per engine + RPM & MAP, OAT, Fuel Flow) $6,695 EDM-851-6C (6-EGT/CHT per engine + RPM & MAP, OAT, Fuel Flow) $8,700 TWIN Engine, Two instruments, EDM-750/850 two EDM-700 displays 2.25 ea. EDM-750-4C (4-EGT and 4-CHT per engine + Memory, 16 probes) $3,695 EDM-750-6C (6-EGT and 6-CHT per engine + Memory, 24 probes) $4,695 EDM-850-4C (4-EGT/CHT per engine + RPM & MAP, OAT, Fuel Flow) $6,195 EDM-850-6C (6-EGT/CHT per engine + RPM & MAP, OAT, Fuel Flow) $8,100 Options available: Second TIT, OAT, Carb. and Oil $ ea.
9 KITS INCLUDE: INSTRUMENT FUNCTIONS INCLUDED OPTIONAL FUNCTIONS EDM-700 Plasma EGT 4 or 6 probes CHT 4 or 6 probes Volts Shock cooling LOP/ROP JPI Exclusive Leaning Mode Span (highest to lowest EGT) Power connector EGT/CHT Harness EZTrends Serial Data recording 3 year Warranty Fuel Flow Oil Temp Oil Pressure RPM OAT TIT CDT IAT CARB Temperature Download box with Memory stick USB built-in with Memory stick EDM-800 Plasma EGT 4 or 6 probes CHT 4 or 6 probes Volts Shock cooling LOP/ROP JPI Exclusive Leaning Mode Fuel Flow (USED, Remaining, GPH Endurance, GPS destination) RPM MAP OAT %HP (Requires: OAT, RPM, MAP, & FF ) All required Harness EZTrends Serial Data recording 3 year Warranty Optional functions Oil Pressure Oil Temperature TIT CDT IAT CARB Temperature Download box with Memory stick USB built-in with Memory stick EDM-730 color EDM-830 color EGT 4 or 6 probes CHT 4 or 6 probes Volts Shock cooling Span (highest to lowest EGT) LOP/ROP JPI Exclusive Leaning Mode Power connector EGT/CHT Harness EZTrends Data recording-100 hrs. Download USB 1 GB memory stick Selectable Positions for Linear gauges 3 year Warranty EGT 4 or 6 probes CHT 4 or 6 probes Volts Shock cooling LOP/ROP JPI Exclusive Leaning Mode Fuel Flow (USED, Remaining, GPH Endurance, GPS destination) RPM MAP Oil Temperature ** Oil Pressure ** OAT %HP (Requires: OAT, RPM, MAP, & FF ) Power connector All required Harness EZTrends Data recording-100 hrs. Download USB 1 GB memory stick ** Selectable Positions for Linear gauges ** 3 year Warranty Optional functions Fuel Flow Oil Temperature Oil Pressure OAT TIT CDT IAT CARB Temperature RPM MAP %HP Optional functions CDT IAT CARB Temperature TIT ** included on the 830 s only Optional on the 800
10 EDM-740 Same as the EDM-830 plus additional Options YES! Now optional FUEL Level, Fuel Pressure (injected only) and Amps with shunt. User Selectable Positions for Linear gauges. 3 year Warranty Optional functions CDT IAT CARB Temperature TIT Air Pressure 1000 psi Sold as single package only L/R-Tank Fuel Quantity,Res or Cap. Fuel Quantity probes not included Only electronics to connect. F-P Fuel Press W/transducer AMP Amps w/100 amp shunt EDM-760 TWIN EGT 4 or 6 probes CHT 4 or 6 probes Volts Shock cooling Span (highest to lowest EGT) EGT Normalize mode LOP/ROP function Power connector All required Harness 20 ft EZTrends Graphing Software free Serial Data recording -25 hours 3 year Warranty Optional functions Fuel Flow (USED per engine, Remaining, GPH, Total fuel USED both engines, Endurance, GPS destination) Oil Temperature OAT TIT CARB Temperature Download box with Memory stick USB built-in with Memory stick
11 Primary Instruments EDM-900 Single Primary EDM-930 Single Primary EDM-960 TWIN Primary Pre-Wired Harness for all functions Display SVGA RPM MAP % HP EGT CHT EGT Prop Manifold Pressure Percent of Horse Power Exhaust Gas Temp. Cylinder Head Temp. Normalize mode LOP/ROP JPI Exclusive Leaning Mode O-T O-P F-P OAT Oil Temperature Oil Pressure Fuel Pressure (when in POH) Outside Air Temp. VDC Voltage (1) AMP Current amps (2 twins) Fuel Flow Transducer FlowScan GPH REQ USD H:M MPG CLD Gallons per Hour GPH Required to wp or destination Fuel used Endurance Hours and Minutes Miles per Gal Shock Cooling on ALL cylinders DIFF Difference between EGT s USB Memory stick 1 GB Data Recording 800 Hrs every 6 sec. EZTrends Graphing Software free 3 year Warranty Optional functions TIT Turbine Inlets Temp.(2) F-P Fuel Pressure F-P Differential Fuel Press. CRB Carburetor Temp. CDT Compressor Discharge IAT Induction Air Temp. Volts pick-up V-2 Amps 2 Fuel Quantity senders capacitance only L/R-Tank Fuel Quantity, using existing senders Aux -Tank Fuel Quantity, using existing senders
12 Turboprop TSO d Instruments Display SVGA Pre-Wired Harnesses, N1 & N2 Torque Pressure Transducer Oil Pressure Transducer Oil Temperature Probe, Fuel Pressure Transducer Fuel Flow Transducer OAT Probe Shunt (For Amps) Volts Pickup, USB Download/Upload Memory Stick. Prices start at $7900. Standard systems are available most are customized per the project based on Functions and Transducers needed. Other Functions Included GPS Interface and Data, Fuel Efficiency, Fuel Used for Trip, Fuel Used Since Last Fill Up, Time to Empty, Fuel to waypoint, Time to Waypoint, Distance to Waypoint, Fuel in Reserve, Time in Reserve, Distance in Reserve, Flight Timer, Engine Hours, Cycles, Date, Local Time, Zulu Time, Warnings.
13 SlimLine Advisory instruments Bright red display with common remote enunciator alarm signal. Specify the red line limit for your aircraft on those gauges that have alarms. All instruments come complete with sensors. All Slims except FS-450 are Size 1 x 2 x 3 deep Sensor Instrument Description List TSO STC RPM ALTERNATOR 8.3 I I OIL-PSI 0 2 Tachometer Quartz accuracy to 1 RPM, Resolution 10 RPM, Red line and yellow line alarms, specify. Hall effect sensor. Designed to mount below present Tachometer. Manifold Pressure Resolution 0.1 inhg, Accuracy 0.1 inhg, Solid state sensor, Over boost alarm set to 36 inhg. Factory setting can be set to any valve. + Volt/Amp Meter/Shunt included FUEL-PSI 2 I I I 6 0 PRESSURE-PSI I355 EGT F 4 I463 6TIT F CHT 5 F OAT F Ammeter/Loadmeter, Resolution 0.1 V/A, Discharge alarm. Shunt capacity to 100 amps Oil Pressure Resolution 1 psi, Low pressure alarm at 15 psi, psi range. Fuel Pressure Resolution 1 psi, with alarm $495 P M A STC Advisory $350 Experimental aircraft only $295 W Shunt Injected engine or psi range $295 Boom Pressure Resolution 2 psi, psi range. Exhaust Gas Temperature Resolution 1 or 10, High temperature alarm set to 1650 F. Turbine Inlet Temperature Resolution 1 or 10, High temperature alarm set to 1650 F. Cylinder Head Temperature Resolution 1 degree, High temperature alarm set to 450 F. Outside Air Temperature Resolution 1 degree, Range 40 to 195 F. Specify C or F Experimental aircraft only $295 Experimental aircraft only Experimental aircraft only $295 Experimental aircraft only $295 T S O $295 T S O $295 T S O $295 T S O FAA approved STC as Primary Replacement of original equipment STC as Primary Replacement of original equipment FAA approved J P I 132 OIL F CARB F Oil Temperature Resolution 1, High temperature alarm set to 230 F. Carburetor Temperature Resolution 1 F. No Alarms $295 T S O $295 T S O STC as Primary Replacement of original equipment FAA approved
14 Replacement Probes and Sensors Part number Price EGT probe, High Response with hardware M111 $120 CHT probe, spark plug gasket M113 $120 CHT probe, threaded bayonet 5050T $120 TIT probe and extension lead, clamp on M111T $195 OAT probe with shield and extension lead $195 OIL temperature probe 1/8 NPT, Lycoming and Continental for Advisory instruments OIL 5/8-18 thread for Primary instruments. Replaces original sensor. Carburetor temperature probe, ¼-24 thread or slim OAT probe Adaptor probe permits the JPI probe and the factory CHT to coexist in the same location Manifold pressure sensor, 0 to 60 inches of Hg. 1/8 NPT L/C $ $ $195 M113-3/8 $ $245 Oil pressure sensor psi 1/8 NPT Sensor Only See Oil pressure Option for EDM-700/800 Fuel pressure Injected engine sensor 5-32 psi 1/8 NPT $200 $200 RPM pressurized mag only sensor for Bendix 20 series $395 RPM pressurized mag only sensor for Bendix 1200 series $395 RPM pressurized mag sensor for Slick 4000, 6000 series $395 Standard RPM vent plug sensor, fits any Bendix $299 Standard RPM vent plug sensor, fits any Slick $299 Shunt, 50 m.v. / 100 amp $75 Fuel Flow Transducer Pressure201 or Gravity 231. K-Factor and Special K-Factor at fixed available $395 FUEL FLOW TESTER Fuel flow tester. Generates pulses simulating Flow Scan fuel flow transducer. FF TESTER $35
EDM-700/760/800/900/930 & 450 SYSTEM PRICE LIST
EDM-700/760/800/900/930 & 450 SYSTEM PRCE LST Effective February 1, 2012 ALL EDM SYSTEMS are TSO d and NCLUDES as free: LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder
More informationEDM-700/760/790/800/900/930 & 450 SYSTEM PRICE LIST
EDM-700/760/790/800/900/930 & 450 SYSTEM PRICE LIST Effective July 1 2016 ALL EDM SYSTEMS are TSO d and INCLUDES as free: LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder
More informationEffective March 1, 2018
SYSTEM PRICE LIST Effective March 1, 2018 and STC d SINGLE Engine EDM-700/800, 4,6,7,8,9 Cyl. TSO Display s EGT s, CHT s, TIT or Oil Temp (digital and bar graph display). Other temperatures & functions
More informationEffective March 2, SINGLE Engine EDM-700/800, 4,6,7,8,9 Cyl. TSO and STC d
SYSTEM PRICE LIST Effective March 2, 2018 SINGLE Engine EDM-700/800, 4,6,7,8,9 Cyl. TSO and STC d Display s EGT s, CHT s, TIT or Oil Temp (digital and bar graph display). Other temperatures & functions
More informationCGR-30P PREMIUM Worksheet
Rev: D CGR-30P PREMIUM Worksheet Replace your Tachometer with the CGR-30P Download this file, fill it out and then save it. Include it with your order. www.buy-ei.com General Info: Aircraft Information:
More informationElectronics. International Inc. (541)
Electronics International Inc. (541) 318-6060 CONTENTS Glass Panel Displays MVP-50P Glass Panel Piston Engine Monitor & In-Flight Information System 4-6 MVP-50T Glass Panel Turboprop Monitor & In-Flight
More information06/04/
06/04/18 www.buy-ei.com 1 CONTENTS MVP-50P Piston Engine Monitor & In-Flight Information System 3 MVP-50T Turboprop Monitor & In-Flight Information System 6 CGR-30P 3 1/8 for Single-Engine Piston Engine
More informationFAA Approved Installation Manual for the EDM-711 Primary Temperature Indicating System Page Page 1 of 23 Report No. 106P Rev.
FAA Approved Installation Manual for the EDM-711 Primary Temperature Indicating System Page Page 1 of 23 TABLE OF CONTENTS Page 1. INSTRUMENT MARKINGS 2 2. INITIAL BENCH CHECK 2 3. LOCATION OF, AND INSTALLING
More informationMVP-50P. Marking and Configuration Requirements for Certified Aircraft
Accurate CHT Measurements Marking and Configuration Requirements for Certified Aircraft ELECTRONICS INTERNATIONAL MVP-50P Marking and Configuration Requirements for Certified Aircraft Electronics International
More informationPilot s Guide. EDM-900 Primary TSO/STC. Engine Data Management
Pilot s Guide Engine Data Management EDM-900 Primary TSO/STC Copyright 2011 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach, CA 92646 Factory:
More informationJ.P.INSTRUMENTS PO BOX 7033 HUNTINGTON BEACH CA Last printed 7/15/04
Page 1 of 19 THE OWNER OF THE EDM-760 MUST KEEP THIS MANUAL TABLE OF CONTENTS Page 1. INSTALLING THE INDICATOR 2 2. EXHAUST GAS TEMPERATURE PROBE 2 3. TURBINE INLET TEMPERATURE PROBE 2 4. USING ORIGINAL
More informationTHE OWNER OF THIS EDM-700/800/730/830 MUST KEEP THIS MANUAL
INSTALLING THE EGT-701 SCANNER 1/20/09 Rev-E THE OWNER OF THIS EDM-700/800/730/830 MUST KEEP THIS MANUAL TABLE OF CONTENTS Page 1) INSTALLING THE INDICATOR 3 2) EXHAUST GAS TEMPERATURE PROBE 3 3) TURBINE
More informationFAA Approved Installation Manual for the Report No 908. Primary Engine Data Management System Date
Page 1 of 56 Rev I TABLE OF CONTENTS 1. Revisions 2 2. Read This First 2 3. Instrument Labeling 3 4. Operation and Abbreviations 4 5. Locating and Installing the Indicator and Remote Alarm Display (RAD
More informationG3 SINGLE ENGINE BEZEL
SAVE $ ON A BUNDLE: PURCHASE A TAS WITH A G3 ENGINE MONITOR PACKAGES $1000.00 OFF LIST PRICE G3 SINGLE ENGINE - 2.25 BEZEL 610C-342 4 Cylinder G3 $3,185.00 610C-362 6 Cylinder G3 $3,367.00 610C-343 4 Cylinder
More informationPilot s Guide Engine Data Management
Pilot s Guide Engine Data Management EDM-900 Experimental and TSO Copyright 2003, 2004, 2005 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach,
More informationThe Owner of the EDM-960 must keep this manual J.P. INSTRUMENTS PO BOX 7033 HUNTINGTON BEACH CA Last printed 1/24/2013 4:16:00 PM
Page 1 of 45 Rev C TABLE OF CONTENTS 1. Revisions 2 2. Read This First 2 3. Instrument Marking 3 4. Primary TSO Label 3 5. Operation and Abbreviations 4 6. Alarm hierarchy 5 7. Dimming 5 8. Locating and
More informationFAA Approved Installation Manual for the Report No 908. Primary Engine Data Management System Date TABLE OF CONTENTS
Page 1 of 56 Rev I TABLE OF CONTENTS 1. Revisions 2 2. Read This First 2 3. Instrument Labeling 3 4. Primary TSO Label 3 5. Operation and Abbreviations 4 6. Remote Alarm Light EDM 900 5 7. Locating and
More informationPilot s Guide EDM-730 EDM-830
Pilot s Guide Engine Data Management EDM-730 EDM-830 EDM-740 EXPERIMENTAL Copyright 2000-2010 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach,
More informationGENERAL The AuRACLE Engine Management System primary display provides a graphical representation of the following engine instrumentation:
GENERAL The AuRACLE Engine Management System primary display provides a graphical representation of the following engine instrumentation: o Manifold Pressure (MAP) o RPM o Fuel Flow (FF) o Turbine Inlet
More informationPilot s Guide. EDM-930 Primary TSO. Engine Data Management
Pilot s Guide Engine Data Management EDM-930 Primary TSO Copyright 2010 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach, CA 92646 Factory:
More informationFAA Approved Installation Manual for the EDM-960 Report No 909 Primary Engine Data Management System Date
FAA Approved Installation Manual for the EDM-960 Report No 909 Page 1 of 46 Rev E 0TABLE OF CONTENTS 1. Revisions. Read This First 3. Instrument Marking 3 4. Primary TSO Label 3 5. Operation and Abbreviations
More informationElectronics International inc.
Electronics International inc. MVP-50T Marking and Configuration Requirements Rev B: 6/24/11 Electronics International Inc. will configure the MVP-50T to the range limits, markings and hardware outlined
More informationProduct Price List and Order Form Note all prices include Freight/Customs to Australia. They do NOT include GST SKYVIEW SYSTEMS
A.C.N. 007.339.451 A.B.N. 65 007 339 451 Geodetic Road, Horsham Aerodrome P.O. Box 626 Horsham Australia 3402 Phone: 03 53811727 Fax: 03 53811626 Email info@horshamaviation.com.au Internet http://horshamaviation.com.au/
More informationThe Owner of the EDM-960 must keep this manual
system Page 1 of 51 Rev A TABLE OF CONTENTS 1. Read This First 2 2. Instrument Marking 3 3. Operation 4 4. Locating and Installing the Indicator and Remote Alarm Display, RAD 6 5. EDM-960 Key Card Installation
More informationTSO Installation Manual EDM-900/930/950 Report No 907 Engine Data Management System
Page 1 of 46 Rev E Section TABLE OF CONTENTS Page Read This First 2 1. INSTRUMENT MARKINGS 3 2. Operation 4 3. Locating and Installing the Indicator 7 4. EDM-900 & EDM -930 Key Card Installation 8 5. Routing
More informationPilot s Guide. Fuel Scan FS-450. Copyright 2001 J.P. Instruments, Inc. All Rights Reserved. Printed in the United States of America
Pilot s Guide Fuel Scan FS-450 Copyright 2001 J.P. Instruments, Inc. All Rights Reserved Printed in the United States of America J.P.INSTRUMENTS Information: P. O. Box 7033 Huntington Beach, CA 92646 Factory:
More informationFuel Flow / Pressure (FP-5 and FP-5L) Operating Instructions
Fuel Flow / Pressure (FP-5 and FP-5L) Operating Instructions OI 0505931 5/5/93 Rev. H: 2/17/05 You must read this manual before installing or operating the instrument. This manual contains warranty and
More informationPilot s Guide EDM-900. Engine Data Management. Copyright 2003 J.P. Instruments, Inc. All Rights Reserved
Pilot s Guide Engine Data Management EDM-900 Copyright 2003 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach, CA 92646 Factory: 3185 B Airway
More informationFAA Approved Installation Manual for the Report No 908. Primary Engine Data Management System Date TABLE OF CONTENTS
Page 1 of 52 Rev K TABLE OF CONTENTS Section 1. Revisions 2 2. Read This First 2 3. Instrument Labeling 5 4. Primary TSO Label 5 5. Operation and Abbreviations 6 6. Remote Alarm Light EDM 900 7 7. Locating
More informationApproved Installation Manual for the Experimental Report No 350 Page 1 of 41 Rev IR Engine Data Management System Date TABLE OF CONTENTS
Page 1 of 41 Rev IR TABLE OF CONTENTS Section 1. Revisions 2 2. Read This First 2 3. Remote Alarm Light EDM 350 4 4. Locating and Installing the Indicator Display (Alert Light) 7 5. Routing the Wiring
More informationEDM-760 Quick Reference Guide
EDM-760 Quick Reference Guide How to use LeanFind (page 13) Pre-lean the mixture Tap LF button Lean the mixture How to Change Modes (page 7) PEAK EGT Stop at peak Enrich to peak or 100 rich of peak EDM-760
More informationPilot s Guide. Engine Data Management EDM-700 EDM-800. Copyright 2001 J.P. Instruments, Inc. All Rights Reserved
Pilot s Guide Engine Data Management EDM-700 EDM-800 Copyright 2001 J.P. Instruments, Inc. All Rights Reserved J.P. INSTRUMENTS INC. Information: P. O. Box 7033 Huntington Beach, CA 92646 Factory: 3185
More informationSECTION 3 ENGINE INDICATION SYSTEM (EIS)
ENGINE INDICATION SECTION ENGINE INDICATION () NOTE: Refer to the Pilot s Operating Handbook (POH) for limitations. The Engine Indication System () displays critical engine, electrical, fuel, and other
More informationAuRACLE II 6-Cyl Installation Manual XA-EngAna-AuRII6CylInst Rev. H. AuRACLE II 6-Cylinder Engine Management System Installation Manual - 1 -
AuRACLE II 6-Cylinder Engine Management System Installation Manual - 1 - Table of Contents 1 Important Installation/Warranty Information...7 2 About the AuRACLE Installation Manual...9 2.1 Notes Warnings
More informationIndicating. 1. General. A. Fuel Quantity. B. Fuel Flow
Indicating GENERAL 28-40: INDICATING. General A. Fuel Quantity A dual reading fuel quantity indicator is displayed in the Fuel Qty block of the ENGINE page along calibrated vertical bars. The fuel quantity
More informationElectronics International Inc Powell Butte Hwy Bend, OR (541)
Fuel Flow/Pressure (FP-5 and FP-5L) Installation Instructions II 0506931 5/6/93 Rev. I: 7/2/02*** You must read this manual before installing or operating the instrument. This manual contains warranty
More informationPrimary Glass Panel Engine Monitor
Primary Glass Panel Engine Monitor (with In-Flight Data) MVP-50P Installation Instructions II 0425051 Rev. I: 02/05/09*** You must read this manual before installing or operating the instrument. This manual
More informationElmendorf Aero Club Aircraft Test
DO NOT WRITE ON THIS TEST FEB 2013 Elmendorf Aero Club Aircraft Test Cessna 172RG For the following questions, you will need to refer to the Pilots Information Manual for the C-172RG and the Auxiliary
More informationThis document set is applicable to the following part number configurations:
This document set is applicable to the following part number configurations: Four Cylinder Exhaust Gas and Cylinder Head Temperature Part Number Kit Configuration Instrument Thermocouples ECT204 ECT204
More informationAuRACLE CRM Cylinder Twin Engine Management System Installation Manual - 1 -
AuRACLE CRM 2120 6-Cylinder Twin Engine Management System Installation Manual - 1 - Table of Contents 1 Important Installation/Warranty Information... 6 2 About the AuRACLE Installation Manual... 9 2.1
More informationLingenfelter NCC-002 Nitrous Control Center Quick Setup Guide
Introduction: Lingenfelter NCC-002 Nitrous Control Center Quick Setup Guide The NCC-002 is capable of controlling two stages of progressive nitrous and fuel. If the NCC-002 is configured only for nitrous,
More informationPrimary Fuel Flow/Pressure
Primary Fuel Flow/Pressure (FP-5-LxxHyy and FP-5L-LxxHyy) Installation Instructions II S0506931 04/25/2001 Rev. C: 2/18/2005 You must read this manual before installing or operating the instrument. This
More informationCrank Trigger Hardware Installation
Crank Trigger Hardware Installation Step 1 - Bring the engine up to TDC and remove the crank pulley bolt. Step 2 - Install trigger wheel making sure to line up the keyway. You may need to use the bolt
More informationG1000TM. engine indication system pilot s guide for the Diamond DA40
G1000TM engine indication system pilot s guide for the Diamond DA40 Record of Revisions Revision Date of Revision Revision Page Range Description A 05/31/05 7-1 7-7 Initial release. Garmin G1000 EIS Pilot
More informationAll information is displayed in an easy to read format on a high resolution wide viewing angle cd/m2 sunlight readable color display.
Vega EMS-1 Universal Engine Monitoring System Operating Manual English 1.01 Introduction The Vega EMS-1 is a 2 1/4 (57mm) universal engine monitor color display instrument. The EMS-1 contains all the necessary
More informationCentral Warning Systems
CIRRUS AIRPLANE MAINTENANCE MANUAL Central Warning Systems CHAPTER 31-50: CENTRAL WARNING SYSTEMS GENERAL 31-50: CENTRAL WARNING SYSTEMS 1. General This section describes the Indicating/Recording Systems
More informationM-4-180V S2 M-4-180V S4. MAULE AIR, INC GA Hwy 133 South, Moultrie, GA / Phone (229) /
M-4-180V S2 M-4-180V S4 MAULE AIR, INC. 2099 GA Hwy 133 South, Moultrie, GA 31788 / Phone (229) 985-2045 / www.mauleairinc.com Models, Equipment, Colors and Other Items Are Subject To Change At Any Time
More informationa. Lycoming IO-520J 250 HP c. Lycoming O-540-J3C5D 235 HP b. Continental O450T 330 HP d. Lycoming O-360A 180 HP
Three points each question Page 1 of 6 References: Pilot's Operating Handbook for the 1979 Cessna R182 Model; Flying Magazine Article "Cessna 182 Safety Report;" RAFA SOP; and Refueling Instructions found
More informationThe TC-4 is a 2 1/4 sunlight readable 4 channel thermocouple color display instrument.
Vega TC-4 One to four channel thermocouple (EGT/CHT) indicator Operating Manual English 1.00 Introduction The TC-4 is a 2 1/4 sunlight readable 4 channel thermocouple color display instrument. The instrument
More informationCPi. CoiL PACK IGNiTioN FOR AViATiON. For 4,6 and 8 cylinder 4 stroke applications. Please read the entire manual before beginning installation.
1 CPi CoiL PACK IGNiTioN FOR AViATiON Coil pack (4 cylinder) Coil pack (6 cylinder) For 4,6 and 8 cylinder 4 stroke applications. Please read the entire manual before beginning installation. Software version
More informationModel EIS-66R Remote Engine Information System Installation Manual
Model EIS-66R Remote Engine Information System Installation Manual Grand Rapids Technologies Incorporated 3133 Madison Ave SE Grand Rapids, MI 49548 (616) 245-7700 Fax (616) 245-7707 Rev A Applicable to
More informationRevision B: 3/10/00 OI
Revision B: 3/10/00 OI 0505991 Contents Warranty --------------------------------------------------------------------------------------------------- 2 Introduction -----------------------------------------------------------------------------------------------
More informationElmendorf Aero Club Aircraft Test
DO NOT WRITE ON THIS TEST FEB 2014 Elmendorf Aero Club Aircraft Test Cessna - 185 For the following questions, you will need to refer to the Pilots Information Manual for the C-185F and Graphic Engine
More informationTrouble Shooting Instructions
Customer: Date: Trouble Shooting Instructions Electroair Acquisition Corp. 317 Catrell Dr., Suite #2 Howell, MI 48843 USA Ph: 517-552 552-9390 Fax: 517-552 552-9391 Email: sales@electroair.net Electroair
More informationView. Capture. Analyze.
View. Capture. Analyze. The New LM-2 Digital Air/Fuel Ratio Meter and More! Knowledge is Horsepower www.tuneyourengine.com Catalog NOW YOU RE TUNING! At the track, on the street, on the dyno, drag, rally,
More informationAll information is displayed in an easy to read format on a high resolution wide viewing angle 4.3 sunlight readable color display.
XTreme - EMS Universal Engine Monitor Operating Manual English 1.01 Introduction The XTreme-EMS is a compact universal engine monitor. The XTreme-EMS, which fits a standard 3 1/8 instrument panel hole,
More information2005 M/MOPA Convention Academic Session Survey of Malibu/Mirage Piston Engine Design Operation and Maintenance
2005 M/MOPA Convention Academic Session Survey of Malibu/Mirage Piston Engine Design Operation and Maintenance Jonathan Sisk, Owner Enhanced Flight Group PA46 Piston Engine Types 1984-1988 Malibu uses
More informationINTEGRATED ENGINE INSTRUMENT SYSTEMS
All INTEGRATED ENGINE INSTRUMENT SYSTEMS. DESCRIPTION This section describes that portion of the engine indicating system which is used to analyze engine performance, temperature, and condition. Serials
More informationFP-100 Fuel Pressure and Ammeter Indicator Page 1 of 16. All specification subject to change Aerospace Logic Inc.
Page 1 of 16 All specification subject to change 2002-2003 FP-100 Operations and Installation Manual This manual is certified for use with instrument serial number ASL000000 Use of this manual with any
More informationINSTALLATION MANUAL EAGLE EMS ELECTRONIC ENGINE MANAGEMENT SYSTEM EMSINSTL001 REV 0.2 2/12/08
INSTALLATION MANUAL EAGLE EMS ELECTRONIC ENGINE MANAGEMENT SYSTEM EMSINSTL001 REV 0.2 2/12/08 The information contained in this publication is intended as a guide to install your Eagle EMS Engine Management
More informationTemperatures can be displayed in degrees Celsius or degrees Fahrenheit from -100ºC to 1200ºC (-148ºF to 2192ºF).
Velocity TC-3 One to Twelve channel thermocouple (EGT/CHT) indicator Operating Manual English 1.02 Introduction The TC-3 thermocouple display unit is a 12 channel 3 1/8 instrument that contains all the
More informationLycoming Engine Sender Installation Guide
3401 Airport Drive Ste E, Torrance, CA 90505. Tel: 1-877-8FLYING Fax: 1-310-534-2282 e-mail: sales@mglavionics.com Web: www.mglavionics.com MGL Avionics EFIS Lycoming Engine Sender Installation Guide This
More informationUltimate Bar Graph Engine Analyzer
Ultimate Bar Graph Engine Analyzer (UBG-16) Operating Instructions OI 0505991 5/5/99 Rev. B: 3/10/00 You must read this manual before installing or operating the instrument. This manual contains warranty
More informationGEM INSTALLATION MANUAL DOCUMENT No REV. 1.4
CHECK WIRING HARNESS BEFORE INSTALLATION Easier/cheaper to check and recheck all harness's and connections than repairing them later! INSTALLATION MANUAL FOR GEM P/N 610C-001 and P/N 1200C-001 Models G1,
More informationElmendorf Aero Club Aircraft Test
DO NOT WRITE ON THIS TEST FEB 2013 Elmendorf Aero Club Aircraft Test Cessna - 182 For the following questions, you will need to refer to the Pilots Information Manual for the C-182R. The bonus questions
More informationDO NOT WRITE ON THIS TEST FEB 2013 Elmendorf Aero Club Aircraft Test. Cessna - 182
DO NOT WRITE ON THIS TEST FEB 2013 Elmendorf Aero Club Aircraft Test Cessna - 182 For the following questions, you will need to refer to the Pilots Information Manual for the C-182R. The bonus questions
More informationEIS Instructions for Continued Airworthiness
EIS-61000 Instructions for Continued Airworthiness Electroair 317 Catrell Dr, Suite #2 Howell, MI 48843 U.S.A. Ph: 517-552-9390 Fax: 517-552-9391 Email: sales@electroair.net Electroair Acquisition Corp.
More informationEGT-100 Operations and Installation Manual
Page 1 of 11 All specification subject to change 2002-2005 EGT-100 Operations and Installation Manual This manual is certified for use with instrument serial number ASL000000 Use of this manual with any
More informationVIEW. CAPTURE. ANALYZE. CONTROL.
VIEW. CAPTURE. ANALYZE. CONTROL. The INNOVATE MOTORSPORTS Difference. DirectDigital O2 Control for 2017! Increased analog output speed! 4 ms response time helps ensure that your ECU sees changes in Air/Fuel
More informationMMOPA 2013 Piston Engine Seminar
MMOPA 2013 Piston Engine Seminar By Chad Menne / Malibu Aerospace Teledyne Continental Motors Gold Motor Textron Lycoming Grey Motor Who am I and why are we here? Chad Menne Owner - Malibu Aerospace Maintain
More informationGEM INSTALLATION MANUAL DOCUMENT No REV. 1.5
CHECK WIRING HARNESS BEFORE INSTALLATION Easier/cheaper to check and recheck all harness's and connections than repairing them later! INSTALLATION MANUAL FOR GEM P/N 610C-001 and P/N 1200C-001 Models G1,
More informationBlaze TC-6. Introduction. 1 Features. Twelve channel thermocouple (EGT/CHT) indicator. Operating Manual English 1.00
Blaze TC-6 Twelve channel thermocouple (EGT/CHT) indicator Operating Manual English 1.00 Introduction The TC-6 is a 3 1/8 sunlight readable 12 channel thermocouple color display instrument that contains
More informationCHAPTER 77 ENGINE INDICATING
FBA-C, FBA-C CHAPTER 77 ENGINE INDICATING 77-00 Page July 4, 0 FBA-C, FBA-C List of Effective Pages Chapter / Section Page No. Date Chapter / Section Page No. Date 77-00 Jul 4, 0 Jul 4, 0 77-05 Jul 4,
More informationEAGLE EMS ELECTRONIC ENGINE MANAGEMENT SYSTEM INSTALLATION MANUAL
EAGLE EMS ELECTRONIC ENGINE MANAGEMENT SYSTEM INSTALLATION MANUAL August 18, 2015 20 020_C.DOCX The information contained in this publication is intended as a guide to install your Eagle EMS Engine Management
More informationMicroflo. Digital Fuel Management System. OPERATING MANUAL Single and Twin Engine Indicators. Shadin Co., Inc. For P/N: 91202X-38-D
Microflo Digital Fuel Management System OPERATING MANUAL Single and Twin Engine Indicators For P/N: 91202X-38-D Shadin Co., Inc. TABLE OF CONTENTS 1. GENERAL DESCRIPTION...3 1.1 THE SYSTEM PROVIDES...4
More informationJ.P.Instruments Inc B Airway Ave Costa Mesa CA Fax
EDM-900/930 Instructions for Continued Airworthiness Rev E Date 5-24-2014 Page 1 of 6 J.P.Instruments Inc.. 3185B Airway Ave Costa Mesa CA 92626 714 557 3805 Fax 714 557 9840 EDM 900/930 Instructions for
More informationFrequently Asked Questions Certification 1. Are the ACS-320, ACS-360 and ACS-361 (ACS) Engines new zero time engines?
Frequently Asked Questions Certification 1. Are the ACS-320, ACS-360 and ACS-361 (ACS) Engines new zero time engines? Yes. The ACS Engines are brand new, zero time engines designed to meet the increasing
More informationVission 20/20 micro-controller. Operation and service manual
Vission 20/20 micro-controller Operation and service manual Section Title Table of Contents Section Number How To Use This Manual...TOC-8 Section 1 Operational Flow Charts Requirements to Start Compressor...1-1
More informationMarine Propulsion 3126
Marine Propulsion 3126 SPECIFICATIONS 22 bkw @ rpm bhp @ rpm Shown with Accessory Equipment STANDARD ENGINE EQUIPMENT Air Inlet System 12V air inlet heater, sea water aftercooler, air cleaner/fumes disposal,
More informationFL-100-R (109) Operations and Installation Manual
Page 1 of 23 All specification subject to change 2002-2005 FL-100-R (109) Operations and Installation Manual This manual is certified for use with instrument serial number ASL000000 Use of this manual
More informationINSTALLATION AND DETAIL SPECIFICATIONS FOR THE SILVER HAWK TM EX-5VA1 TM SERVO KIT
INSTALLATION AND DETAIL SPECIFICATIONS FOR THE SILVER HAWK TM EX-5VA1 TM SERVO KIT 25-020_C.DOC 2-23-2015 Precision Airmotive LLC fuel systems are produced using the highest quality materials and components.
More informationMALLORY FIRESTORM CD MULTI COIL HARDWARE INSTALLATION - PN 69150C / 69150R
FORM 69150C/R MALLORY FIRESTORM CD MULTI COIL HARDWARE INSTALLATION - PN 69150C / 69150R To ensure you are using the most current instruction sheet, please visit www.malloryfirestorm.com. CAUTION! The
More information550 T.I. ENGINE FOR THE CESSNA 210 STC FOR TELEDYNE CONTINENTAL IO-550-P FOR THE 210 & T210 (SERIAL NUMBERS THROUGH K, L, M & N)
550 T.I. ENGINE FOR THE CESSNA 210 STC FOR TELEDYNE CONTINENTAL IO-550-P FOR THE 210 & T210 (SERIAL NUMBERS 21059200 THROUGH 21064897 K, L, M & N) You Can Have More Than A New Engine In Your Cessna* You
More informationInduction, Cooling, & Exhaust Aviation Maintenance Technology
Induction, Cooling, & Exhaust Aviation Maintenance Technology INDUCTION Induction = There are two basic types 1. 2. Non-supercharged components 1. 2. 3. 4. 5. 6. 7. 8. Air Scoop Air filters. Ducting Hot
More informationOUTLINE. Commercial Requirements Insurance Mins Basic Info Systems Limitations Performance Charts Questions
T-34B GROUND SCHOOL OUTLINE Commercial Requirements Insurance Mins Basic Info Systems Limitations Performance Charts Questions COMMERCIAL REQUIREMENTS 61.129 Aeronautical experience. (a) For an airplane
More informationN706SP has a CC-1P CHT instrument installed. Primary TIT and CHT Instruments and Remote Switches Operating and Installation Instructions
Primary TIT and CHT Instruments and Remote Switches Operating and Installation Instructions OII 091294 0912941 9/12/94 You must read this manual before installing or operating the instrument. This manual
More informationLOG OF REVISIONS. Model G58 Baron (Serials TH-2125 and After) Pilot s Operating Handbook and FAA Approved Airplane Flight Manual
LOG OF REVISIONS Model G58 Baron (Serials TH-2125 and After) Pilot s Operating Handbook and FAA Approved Airplane Flight Manual Revision A12 - May, 2015 Title Page LOEP LOR Section 1 All Reformatted to
More informationP68 SERIES SERVICE INSTRUCTION
vulcanair spa via g. pascoli, 7 80026 casoria (na) italia Tel +39 081 5918111 Fax +39 081 5918172 info@vulcanair.com www.vulcanair.com P68 SERIES SERVICE INSTRUCTION No. 61 Rev. 1 SUBJECT: NEW EGT INDICATOR
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
ANALYZERS - ENGINE MONITORING. DESCRIPTION This section describes that portion of the engine indicating system which is used to analyze engine performance, temperature, and condition. Serials 00 thru 8
More informationAll information is displayed in an easy to read format on a high resolution wide viewing angle 4.3 sunlight readable color display.
XTreme - EMS Universal Engine Monitor Operating Manual English 1.02 Introduction The XTreme-EMS is a compact universal engine monitor. The XTreme-EMS, which fits a standard 3 1/8 instrument panel hole,
More informationDMT PERFORMING UNDER PRESSURE DMT. Pressure Scanner Features. Applications. Description 1/7
Features User Accessible Memory for Test Configuration Management ±0.05% FS System Accuracy EU Throughput Rates of 500 Hz Auto-Negotiating 10/100 BaseT Ethernet with TCP & UDP Protocol Pressure Ranges
More information2001 PRICE LIST. Photo Credit: Bill Fedorko, Custom Planes magazine - January Kemp St. Merritt Island, FL USA
2001 PRICE LIST Photo Credit: Bill Fedorko, Custom Planes magazine - January 2000 800 Kemp St. Merritt Island, FL 32952 USA Phone/Fax: 1 (321) 453-6641 http://www.aerocompinc.com AEROCOMP, INC. -- Year
More informationDigiflo. Digital Fuel Management System. OPERATING MANUAL Single and Twin Engine Indicators. Shadin. For P/N: 91052XP
Digiflo Digital Fuel Management System OPERATING MANUAL Single and Twin Engine Indicators For P/N: 91052XP Shadin TABLE OF CONTENTS 1. GENERAL DESCRIPTION...3 1.1 THE SYSTEM PROVIDES...4 1.1.1 ENDURANCE...4
More informationAnnunciator Panel. (AP-7H and AP-7V) Operating and Installation Instructions OI
Annunciator Panel (AP-7H and AP-7V) Operating and Installation Instructions OI 0908931 9/8/93 You must read this manual before installing or operating the instrument. This manual contains warranty and
More informationVan s Aircraft RV-7A. Pilot s Operating Handbook N585RV
Van s Aircraft RV-7A Pilot s Operating Handbook N585RV PERFORMANCE SPECIFICATIONS SPAN:..25 0 LENGTH...20 4 HEIGHT:.. 7 10 SPEED: Maximum at Sea Level...180 knots Cruise, 75% Power at 8,000 Ft...170 knots
More informationGEM INSTALLATION MANUAL DOCUMENT No REV. 1.3 CHECK WIRING HARNESS BEFORE INSTALLATION INSTALLATION MANUAL
CHECK WIRING HARNESS BEFORE INSTALLATION INSTALLATION MANUAL FOR INSIGHT GEM 610C-001 G4-001 AND G4-002 DOCUMENT No. 070906 READ THESE INSTRUCTIONS COMPLETELY BEFORE PROCEEDING WITH INSTALLATION Insight
More informationUSER'S MANUAL FOR THE ENGINE INFORMATION SYSTEM
USER'S MANUAL FOR THE ENGINE INFORMATION SYSTEM Grand Rapids Technologies Incorporated 889 76th St SW #2 Byron Center, MI 49315 (616) 583-8000 Fax (616) 583-8001 1 1. USING THIS MANUAL... 5 2. USING THE
More informationBITZER Capacity Controller for CSH Compressors Temperature Sensor
only. The Temperature Controller has been obsoleted. The below data is for informational purposes only BITZER Capacity Controller for CSH Compressors Temperature Sensor The BITZER CSH Capacity Controller
More information550 T.I. ENGINE FOR THE CESSNA 206 STC FOR TELEDYNE CONTINENTAL IO-550-N FOR THE U 206 & TU 206 (SERIAL NUMBERS 2200 THROUGH 7020)
550 T.I. ENGINE FOR THE CESSNA 206 STC FOR TELEDYNE CONTINENTAL IO-550-N FOR THE U 206 & TU 206 (SERIAL NUMBERS 2200 THROUGH 7020) You Can Have More Than A New Engine In Your Cessna* You Can Experience
More informationSECTION 2 LIMITATIONS
GENERAL This section includes operating limitations, instrument markings, and basic placards required for safe operation of the helicopter, its engine, and other standard systems. This helicopter is approved
More information