Dival
|
|
- Opal Rich
- 6 years ago
- Views:
Transcription
1 Dival )
2 14 Mod. DIVAL DIVAL 507 DIVAL 507 STANDARD WITH SHUT-OFF DEVICE DIVAL 512 STANDARD WITH SHUT-OFF DEVICE DIVAL 507 STANDARD WITH SHUT-OFF DEVICE AND SLIDING FLANGES DIVAL 522 STD WITH SHUT-OFF DEVICE DIVAL 522 WITH SHUT-OFF DEVICE AND INLET AND OUTLET MANOMETER DIVAL 522 STD WITHOUT SHUT-OFF DIVAL 5 WITH SHUT-OFF AND ONE DEVICE OF REGULATION 3
3 SINGLE STAGE LOW/MEDIUM/HIGH PRESSURE SELF-DRIVEN REGULATORS 14 Mod. DIVAL INLET PRESSURE DELIVERY PRESSURE - OVERALL DIMENSIONS - DIVAL fig. C 185 G 1/4 C fig. D fig. A DnE DnU B D G 1/8 ISO 2/1 A 114 WITH DIVAL 507 A 100±1 B 347±1 DIVAL 512 A 130±1 B 335 tab. 1 C 192±1 C 193,5 D 183±1 D 188,5 DnE 1 DnE 1 G 1/8 ISO 2/1 fig. B DnU 1 DnU 1 1/2 - OVERALL DIMENSIONS - DIVAL ø 185 fig. B ± ± 1 DnE DnU ± 0.5 A 330 ø ± ± 1 DnE DnU 115 MATERIAL / MATERIALS / BODY EN-GJS UNI EN 1563 (STANDARD / STANDARD ) ASTM A216WCB (A RICHIESTA / FOR REQUEST) / COVERS G-AlSi13 EN AB (STANDARD / STANDARD) / UPERFICIAL TREAT ENTS / BODY + COPERCHI / COVERS SANDBLASTING+PHOSPHATING+ DUST POLYURETHANE COATING 248 ± 0.5 DIVAL A DnE/U DN 50 PN ±1.5 G 2 F 304 ±1.5 2 NPT F 304 ±1.5 4
4 ADJUSTMENT SPRINGS Wh/NOP Wh/NOP DIFFERENTIAL RELIEF VALVE OPERATING PRESSURE COMPARISON THE NOMINAL OUTLET PRESSURE (Pd) DIVAL BP DIVAL MP COD. (mbar) RANGE (mbar) COD. (mbar) RANGE (mbar) VER VERSION COD. (mbar) RANGE (mbar) DIVAL TR BP MP TR tab tab tab. 5 ADJUSTMENT SPRINGS ADJUSTMENT SPRINGS Who / OPSO COD. (mbar) / RANGE (mbar) COD. Whu / UPSO (mbar) / RANGE (mbar) BP MP TR BP MP TR tab. 2 tab. 3 5
5 14 REGOLATORI AUTOAZIONATI DI BASSA/MEDIA/ALTA PRESSIONE A SINGOLO STADIO SINGLE STAGE LOW/MEDIUM/HIGH PRESSURE SELF-DRIVEN REGULATORS Mod. DIVAL INTRODUZIONE INTRODUCTION Pressure reguiators DIVAL series are spring loaded regulators with balanced plug, diaphragm command and contrast action by spring, suitabie for low, medium and high pressures. Divals and shut-off device series regulators are supplied with internal sensine line. Both regulator and shut-off device are preset for connection to an external sensine line by the customer, related to flowrate diagram on next page. They aro widely used either in civil or industriai plants, usino Natural gas or LPG or non corrosive gas. Thanks to the concept of balanced plug to achiave a: - high flow rate coefficient; - high accuracy, even at maximum flow rates; - reduced lock up pressure zone and lock up pressure; - reduced response times; - no internal leakage at nui flow rate; - fail to open type; - periodical maintenance without disassembling the body from pipings; - possibility to incorporate the slam-shut (OPSO/UPSO) even on reguiators aiready installed, withuot modifying the existing pipings. MAIN FEATURES - Inlet pressure range bpu: BP: bar - bpu: Psi MP / TR: 0.5 bar - bpu: Psi - Max allowable pressure PS: BP: 10 bar - PS 145 Psi MP / TR: bar - PS 290 Psi - Outlet pressure range Wd: BP: mbar - BP: wc MP: mbar - MP: wc TR: mbar - TR: wc - Shut - off device setting range: Wd OPSO BP mbar - Wd OPSO: wc Wd OPSO MP mbar - Wd OPSO: wc Wd OPSO TR mbar - Wd OPSO: wc Wd UPSO BP 6 60 mbar - Wd UPSO: wc Wd UPSO MP mbar - Wd UPSO: wc Wd UPSO TR mbar - Wd UPSO: wc - Accuracy class: AC 5/10/15% - Lock up pressure class: SG 25% Max - Temperature class: 2 (- C +60 C) - (-4 F +140 F) 97/23 CE PED SAFETY DEVICE AND ACCESSORIES Over pressure shut-off device (OPSO). Under pressure shut-off device (UPSO). Safety shut-off device for lack of feeding. Thermic valve. Relief valve. Integrated by-pass. The reset of the safety shut-off devices (wdenever present) is solely manual. CONFORMING TO THE 97/23 CE PED DIRECTIVE 6
6 DIVAL 507 WITH INTERNAL WITH PRESETTING EXTERNAL SENSINE LINE DIVAL 507 WITH INTERNAL AND EXTERNAL SENSINE LINE ACTIVE* Pd:15-100mbar BP Pd : mbar MP Flow rate stmc/h G.N. Pd : mbar TR Flow rate stmc/h G.N. Flow rate stmc/h G.N. Flow rate stmc/h G.N. Flow rate stmc/h G.N. Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0,5bar Pd +0,5bar Pd +0,5bar Pd+1,0bar Pd+1,0bar Pd +1,5bar Pd +2,5bar Pd +2,5bar Pd +3,0bar Pd +5,0bar Pd +5,0bar Pd +5,0bar Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0,5bar Pd +0,5bar Pd +0,5bar Pd+1,0bar Pd+1,0bar Pd +1,5bar Pd +2,5bar Pd +2,5bar Pd +3,0bar Pd +5,0bar Pd +5,0bar Pd +5,0bar * Connctions of external sensine line by the client DIVAL 512 WITH INTERNAL WITH PRESETTING EXTERNAL SENSINE LINE low rate stmc/h G.N. Flow rate stmc/h G.N. Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0,5bar Pd +0,5bar Pd +0,5bar Pd+1,0bar Pd+1,0bar Pd +1,5bar Pd +2,5bar Pd +2,5bar Pd +3,0bar Pd +5,0bar Pd +5,0bar Pd +5,0bar DIVAL 512 WITH INTERNAL AND EXTERNAL SENSINE LINE ACTIVE* Flow rate stmc/h G.N. Flow rate stmc/h G.N. Flow rate stmc/h G.N. Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0,5bar Pd +0,5bar Pd +0,5bar Pd+1,0bar Pd+1,0bar Pd +1,5bar Pd +2,5bar Pd +2,5bar Pd +3,0bar Pd +5,0bar Pd +5,0bar Pd +5,0bar Connctions of external sensine line by the client DIVAL 5 WITH INTERNAL WITH PRESETTING EXTERNAL SENSINE LINE * DIVAL 5 WITH INTERNAL AND EXTERNAL SENSINE LINE ACTIVE* Flow rate stmc/h G.N. Flow rate stmc/h G.N. Flow rate stmc/h G.N. Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0.5bar Pd +0.5bar Pd +0.5bar Pd +1.0bar Pd +1.0bar Pd +1.0bar Pd +2.5bar Pd +2.5bar Pd +2.5bar Pd +5.0bar Pd +5.0bar Pd +5.0bar Pd +0.5bar Pd +0.5bar Pd +0.5bar Pd +1.0bar Pd +1.0bar Pd +1.0bar Pd +2.5bar Pd +2.5bar Pd +2.5bar Pd +5.0bar Pd +5.0bar Pd +5.0bar * Collegamento della presa d impulso esterna a cura del cliente Connctions of external sensine line by the client DIVAL 522 WITH INTERNAL WITH PRESETTING EXTERNAL SENSINE LINE DIVAL 522 WITH INTERNAL AND EXTERNAL SENSINE LINE ACTIVE* Flow rate stmc/h G.N. Flow rate stmc/h G.N. Flow rate stmc/h G.N. Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pu bar AC5 AC10 AC Pd +0.5bar Pd +0.5bar Pd +0.5bar Pd +1.0bar Pd +1.0bar Pd +1.0bar Pd +2.5bar Pd +2.5bar Pd +2.5bar Pd +5.0bar Pd +5.0bar Pd +5.0bar Pd +0.5bar Pd +0.5bar Pd +0.5bar Pd +1.0bar Pd +1.0bar Pd +1.0bar Pd +2.5bar Pd +2.5bar Pd +2.5bar Pd +5.0bar Pd +5.0bar Pd +5.0bar * Connctions of external sensine line by the client x 1.2 LPG flow rate: multiply the value in the table x 1.2 : x Azote flow rate: multiply the value in the table x LEGENDA: LEGEND: Pd: Outlet pressure - Pu: Inlet pressure - Ac: Accuracy 7
7 14 REGOLATORI AUTOAZIONATI DI BASSA/MEDIA/ALTA PRESSIONE A SINGOLO STADIO SINGLE STAGE LOW/MEDIUM/HIGH PRESSURE SELF-DRIVEN REGULATORS Mod. DIVAL 507 fig fig INLET fig (R50) (R40) (R60) DN 25 - PN A=111.5 ± 0.75 fig fig " NPT 1" 1 /2 NPT DN 25 - PN DN 25 - PN VT 41 A=92 ± A=92 ± 0.75 fig " NPT A = 78 ± 0.75 A = 78 ± 0.5 A = 78 ± 0.5 fig (R130) fig DN 1" ANSI 150 G 1" ISO 2/1 39 A=89 ± 0.75 VT 41 A=92 ± 0.75 VT = with Thermical Valve 8
8 SET OF UNIONS STEEL VERSION - OUTLET fig. E fig (R40) fig G 1" G 1" DN 25 - PN " NPT B = 78 ± A B fig B=92± 0.75 fig (R60) fig. 5 EXAMPLE TO INSTALLATION 1" 1 /2 NPT 2" NPT DN 25 - PN fig. F B = 78 ± 0.5 B = 78 ± B=111.5 ± 0.75 fig (R130) fig. G DN 1" ANSI B=92 ±
9 14 REGOLATORI AUTOAZIONATI DI BASSA/MEDIA/ALTA PRESSIONE A SINGOLO STADIO SINGLE STAGE LOW/MEDIUM/HIGH PRESSURE SELF-DRIVEN REGULATORS Mod. DIVAL INLET fig. 1 (R30) fig. 2 (R) fig. 4 (R90) fig fig. 11 1" NPT 1" 1 /2 NPT DN 40 PN VT A=98± A=98± fig. 5 (R80) DN 40 PN DN 25 PN VT fig. 6 (R110) fig. 8 (R150) DN 1" ANSI 150 DN 1"1/2 ANSI A=98 ± A=98± A=98± 0.75 G 1" ISO 2/1 DN 25 - PN A=98 ± fig. 10 A = 93 ± A= 104 ± 0.75 VT A = 93 ± 0.5 VT = con Valvola Termica / with Thermical Valve 10
10 SET OF UNIONS STEEL VERSION fig. H ST - OUTLET fig (R100) 32 DN 40 PN B=125 ± 0.75 fig (R170) 32 DN 1"1/2 ANSI B=125 ± 0.75 fig. 3 fig " 1 /2 NPT 2" NPT G 1" G 1" 1 /2 A B EXAMPLE TO INSTALLATION fig. I fig. L B = 93 ± 0.75 B = 93 ±
11 Mod. LA INTRODUCTION The mod. LA shut-off valve or pressure switch valve is a safety device wdich may be applied to the regulation equipment as all regulators of DIVAL SERIES and to the shut-off equipment as the DILOCK valves. The task of the shut-off valves is to interrupt the gas flow, through an external plug, each time a danger situation occurs. Their operation is related with the connection to a point for the monitoring of the pathway, generally downstream the equipment of regulation or shut-off. - : 2 (- C + 60 C). - Ma : PS bar /4 F. - 1/8 F ISO standard per DIVAL , : /190 C. 97/23 CE PED MAIN FEATURES - Temperature class: 2 (- C + 60 C) - (-4 F +140 F). - Maximum pressure admitted in the external safety plug system: PS bar - PS 290 Psi. - Safety plug with By-pass to make easier the reset with high feeding pressures. - Reset is solely manual (except for the intervention in case of Temperature increase). - Cap with possibility to check the seal for any violation. - Reading pressure inlet with thread 1/4 F with filter. - Remote connection of the cover exhaust of the measuring device with thread 1/8 F ISO 2. - Test button - standard for DIVAL 160 and 250, 5 and Pre-arrangement for electric contact to signal the intervention in telesurveillance (upon request). The device operates in the following cases: - OVER PRESSURE - in case the monitoring pressure exceeds the calibration limits. (the calibration changes from the outside according to the range forecast by the spring in use). - UNDER PRESSURE - in case the monitoring pressure goes below the calibration limits (the calibration changes from the outside according to the range forecast by the spring in use). - TEMPERATURE INCREASE - in case the valve temperature goes further 170/190 C - 338/374 F. CONFORMING TO THE 97/23 CE PED DIRECTIVE 15
12 B Pietro Fiorentini S.p.A. via E.Fermi 8/10 I Arcugnano (VI) Italy Tel Fax via Rosellini 1 I-124 Milano Italy Tel Fax Fiorentini Minireg S.p.A. via Faustinella 11 I Desenzano del Garda (BS Italy Tel Fax
Dival 500 Pressure Regulators
Dival 500 Pressure Regulators Pressure regulators Dival 500 The DIVAL 500 series of spring loaded, diaphragm controlled, balanced valve design regulators are suitable for low, medium and high outlet pressure.
More informationGOVERNORS. Line Pressure Regulators Mod. Stab
S Line Pressure Regulators Stab.300-310 Regulators Line Pressure Regulators Introduction Pietro Fiorentini self-operated pressure governors are designed and manufactured according to the latest international
More informationReflux 819/FO Pressure Regulators
Pressure Regulators Pressure regulators is pilot-controlled pressure regulator for medium and high pressure applications. is normally a fail to open regulator and specificaly will open under the following
More informationReval 182 Pressure Regulators
Reval 182 ressure Regulators ressure regulators Reval 182 Reval 182 is pilot-controlled pressure regulator for medium and low pressure applications. Reval 182 is normally a fail to close regulator and
More informationSafety Shut-off Valve SL/SID/RSL
Safety Shut-off Valve SL/SID/RSL High accuracy shut-off Low pressure loss Operating temperature up to -30 C Easy maintenance DVGW-approval Applications They are designed for transmission and distribution
More informationCP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators
CP400 Series Commercial/Industrial Pressure Loaded Pressure Reducing Regulators September 2014 P1182 typical type cp400 regulator P1522 P1410 Typical type CP403 Regulator WITH INTEGRAL TRUE-MONITOR PROTECTION
More informationBuilt-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
More informationTrunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More informationMark 608 Series. Pressure Regulators Mark 608 Gas Pressure Regulators. Gas Pressure Regulators. Specifications. CRN Registration Number Available
Mark 608 Series Gas Pressure Regulators The 1-1/2" and 2" size Mark 608 valves are for use on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application,
More informationCS800 Series Commercial/Industrial Pressure Reducing Regulators
Bulletin 71.1 D103140X012 CS800 Series April 2018 CS800 Series Commercial/Industrial Pressure Reducing Regulators P1235 P1234 Type CS800 REGULATOR Type CS800IQ with High Capacity Relief P1521 P1692 TYPe
More informationSSV SL-022 Safety Shut-off Valve
SSV SL-022 Safety Shut-off Valve These shut-off valves are designed for transmission and distribution networks, as well as commercial and industrial use. KEY BENEFITS High accuracy shut-off Low pressure
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationR Stainless steel AISI 316L pressure regulator for laboratory use FEATURES. Pressure regulator for inlet pressure up to 20 bar (290 psi).
R32010 Stainless steel AISI 316L pressure regulator for laboratory use FEATURES Pressure regulator for inlet pressure up to 20 bar (290 psi). Inlet connection suitable for ID Insert Deal Presa Universale,
More informationMark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
More informationSeries W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationMark 695 Series. Pressure Regulators Mark 695 Piloted Tank Blanketing Regulators. Piloted Tank Blanketing Regulator 3/4"- 1" Optional Features
Mark 695 Series Piloted Tank Blanketing Regulator 3/4"- 1" The Mark 695 Series piloted soft seat regulator was designed specifically to provide accurate pressure control on very low pressure tank blanketing
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationSeries 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
More informationY610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
More informationSTAF-SG. ANSI flanges. Balancing valves Size 3/4-16
STAF-SG ANSI flanges Balancing valves Size 3/4-16 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
More informationEconomizer pressure Reducing valves
Economizer pressure Reducing valves Cryogenic valves Gauge valves In 1954 Leopoldo Boscarol set up the Milanese company that still today bears his name, immediately making his mark in the sector for the
More informationSeries 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
More informationPressure regulators series ALFA
Pressure regulators series ALFA ALFA series regulators are direct action spring controlled and are made to operate on gas plants of the first, second and third family and with all not corrosive gases.
More informationFlowCon SH mm. Adjustable Dynamic Self Balancing Valve SPECIFICATIONS
FlowCon SH 50-150mm Adjustable Dynamic Self Balancing Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Material: - Diaphragm: Hydrogenated
More informationSTAF-SG. ANSI flanges. Balancing valves DN
STAF-SG ANSI flanges Balancing valves DN 20-400 IMI TA / Balancing valves / STAF-SG ANSI flanges STAF-SG ANSI flanges A flanged, ductile iron balancing valve that delivers accurate hydronic performance
More information3 Edition Product brochure GB AGA
TC AGA Tightness controls Adjustable test period which can be adapted to different systems Adjustable test instant allows quick system start Maximum safety thanks to self-monitoring electronics Product
More information950x. Description. Part List
Via Circonvallazione, 308 Valduggia (VC), Italy Tel: +39 063 4789 Fax: +39 063 47895 950x Variable Orifice Bronze Double Regulating Valve valvoindustria ing.rizzio s.p.a. Description Variable orifice bronze
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationSRG LPG Liquid Service/Offtake Valve Type /
SRG LPG Liquid Service/Offtake Valve Type 480-426 / 480-427 Inlet Connection Outlet Connection Width across flats ¾ NPT 1 ¼ NPT M26x1,814 36 mm 46 mm Product Description: The SRG type 480 liquid service
More informationPNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationVERSAFLOW MAG 4000 Quick Start
VERSAFLOW MAG 4000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. CONTENTS VERSAFLOW MAG 4000
More informationFRM. Medium Pressure Regulator. Medium pressure regulator Type FRM
FRM Medium Pressure Regulator Medium pressure regulator Type FRM Direct acting pressure regulator with adjustable setpoint springs and modular mounted safety shutoff valve (SAV) In compliance with EN 334
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationT205VB Series Tank Blanketing Vacuum Breakers
February 2014 T205VB Series Tank Blanketing Vacuum Breakers Figure 1. Typical T205VB Series Vacuum Breaker Introduction The T205VB Series vacuum breakers (Figure 1) are used for precise control of small
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationPNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
More informationBall Valves. Trunnion
all Valves Trunnion > all Valves Trunnion Reference Standards ASTM ASME NACE MR-01-75 AI Spec. 6 Spec. R-6FA Std. 607 Std. 598 American Society for Testing and Materials American Society of Mechanical
More informationVMH. www. delta-elektrogas.com. Safety shut off valves for gas with hydraulic actuator DN65 DN200 EE
VMH Safety shut off valves for gas with hydraulic actuator DN65 DN200 www. delta-elektrogas.com EE168-0513 VMH Contents Description.. 3 Features.. 3 Functioning and application. 4 Special versions and
More informationT200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
More informationContinuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
More informationVMH. delta-elektrogas.com. Safety shut off valves for gas with hydraulic actuator DN65 DN EE
VMH Safety shut off valves for gas with hydraulic actuator DN65 DN300 delta-elektrogas.com EE175-0117 VMH Contents Description.. 3 Features.. 3 Functioning and application. 4 Special versions and optionals
More informationMaterials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges R.F. PN40-20 C + 400 C Max Pressure : 40 Bars Specifications : Rising stem and handwheel Bolted bonnet and gland
More informationGESTRA DISCO Non-Return Valves RK 41, PN 16. Non-Return Valves PN 6/10/16 DN (½ 8") RK 41, PN 16. Application for liquids, gases, vapours.
GESTRA DISCO Non-Return Valves RK 41, PN 16 Gestra Steam Systems GESTRA Non Return Valves RK 41 PN 6/10/16 15-200 (1/2" - 8") Issue Date: 8/01 Non-Return Valves PN 6/10/16 15 200 (½ 8") RK 41, PN 16 A2
More informationF300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationcs200 series commercial / Industrial pressure reducing regulators
November 2013 cs200 series commercial / Industrial pressure reducing regulators P1188 Figure 1. Typical CS200 Series Pressure Reducing Regulator Features and Benefits Wide Range of Body Sizes and End Connections
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
More informationP200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
More informationData Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
More informationDK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
More informationSR100 Series Service Regulators. Technical Bulletin
SR100 Series Service Regulators Technical Bulletin Model SR100 Series Regulator 02 Elster American Meter The compact, high capacity SR113 service regulator is designed for residential or light commercial/industrial
More informationVETEC Maxifluss Rotary Plug Valve Type 62.7
VETEC Maxifluss Rotary Plug Valve Type 62.7 Double eccentric control valve for process engineering and industrial applications Valve size DN 25 to 2 NPS 1 to 8 Nominal Pressure PN 1 to 4 Class 15 and 3
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
More informationDatasheet MATRE Foam Inductors. Datasheet for MATRE Foam Inductors. 1 Contents
Datasheet for MATRE Foam Inductors 1 Contents 2 General product description... 3 3 General installation guide... 3 4 Product dimensions and performance... 3 4.1 Standard bronze housing design - threaded...4
More informationSLAM-SHUT VALVE. Type OSE
SLAM-SHUT VALVE Type OSE TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting. The OSE is equipped
More informationElectromagnetic flowmeters
02/97 Electromagnetic flowmeters Primary heads Installation instructions ECOFLUX IFS 1000 F Compact flowmeters IFM 1010 K IFM 1080 K CONTENTS Installation in the pipeline Pages 4-5 and 7-8 Grounding Pages
More informationSeries 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve
Series 240 Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries DIN or
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationPneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
More informationSTAINLESS STEEL PRESSURE REDUCING VALVE PRV ELITE
Pressure (bar) STAINLESS STEEL PRESSURE REDUCING VALVE PRV ELITE MAIN CHARACTERISTICS The stainless steel PRV elite valve is intended for the function of pressure reduction of the fluids such as water,
More informationVF VFH. elektrogas.com. Butterfly valves DN40 DN150 EE155-11/11
VF VFH Butterfly valves DN40 DN150 elektrogas.com EE155-11/11 VF VFH Butterfly valves Contents Description.. 2 Features...... 2 Functioning and application.. 3 Technical specifications.... 4 Flow chart
More informationSelf-operated Pressure Regulators Type Universal Pressure Reducing Valve
Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve ANSI version Application Pressure regulators for set points from 0.75 to 400 psi (0.05 to 28 bar) Valves in NPS ½ to 4 (DN
More informationSERIES ECCENTRIC DISC CONTROL VALVES
1-2471 SERIES ECCENTRIC DISC CONTROL VALVES - 2 - 1-2471 SERIES ECCENTRIC DISC CONTROL VALVES 1-2471 series control valves feature a double eccentric disc and an easy-to-be changed PTFE or metal seal ring.
More informationMounting and Operating Instructions EB 5894 EN. Electric control valves with jet pump. Flanged version of valve with jet pump
Electric control valves with jet pump Type 3267/5824, Type 3267/5825, Type 3267/3374, Type 3267/3274 Pneumatic control valves with jet pump Type 3267-1, Type 3267-7 Flanged version of valve with jet pump
More informationType HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Bulletin 71.1 D103087X012 Type HSR December 2017 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications High Capacity Compact Design P1524_1 High Capacity Internal
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationMark 908 Series. Pressure Regulators Mark 908X Piloted Blanketing Regulators
Pressure Regulators Mark 908X Piloted Blanketing Regulators Mark 908 Series 3/4" - 1" (DN20 - DN25) Low Pressure Blanketing (Gas overlay) PRV for medium to large Stainless and SUD vessels The Mark 908
More informationCONA Further components / Accessories
CONA Further components / Accessories Liquid drainer PN16 / PN40 - with flanges (Fig. 665...1) - with screwed sockets (Fig. 665...2) - with socket weld ends (Fig. 665...3) - with butt weld ends (Fig. 665...4)
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationCATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
More informationGrey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationATi Max Series. Pressure Independent Control Valves 2 Way 2-1/2-6
The Auto Touch Independent Max (ATiMX) valve brings pressure independent control technology to valves up to 6 and flow rates up to 468 GPM. It is a state-of-the-art control valve combining a high quality/
More informationT he -A900 series of automatic control
A00 Automatic Control Valve T he -A00 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Top and seat
More informationType HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications
March 2013 Type HSR Pressure Reducing Regulator for Residential, Commercial, or Industrial Applications High Capacity Compact Design High Capacity Internal Relief TYPE HSR ANGLE BODY Globe Bodies Angle
More informationSLK SERIES SAFETY VALVES
SLK SERIES SAFETY VALVES SLK SERIES TABLE OF CONTENTS Relief Valves SLK-Series are spring loaded pressure relieving devices, suitable for discharge of compressible fluids. SLK-series safety valves are
More informationFlowCon SM mm. Dynamic Self Balancing Control Valve SPECIFICATIONS
FlowCon SM 50-150mm Dynamic Self Balancing Control Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Temperature rating, ambient: -10
More information1-1/2 Inch (DN40) 9 lb (4,1 kg) Groove Groove 1 8 lb (3,6 kg) Flange Groove 1 N/A N/A. Flange Flange N/A N/A
Worldwide Contacts www.tyco-fire.com DV-5 Deluge Valve Diaphragm Style General Description The TYCO 1-1/2 inch to inch (DN40 to DN200), DV-5 Deluge Valves are diaphragm type valves designed for vertical
More information2SP TWIN SCREW PUMPS ABS BV DNV GL LR RINA SERIES
TWIN SCREW PUMPS SERIES 2SP The new pump 2SP Series by SEIM represent the evolution of more than 35 years of experience in the field of design and construction of screw rotary pumps. Successful supplies
More informationFloat-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.
Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres Condensate pump No electricity required / float-operated PN 16 (82.691) Body: Jacket P235GH-TC, Bottom flanges
More informationMounting and Operating Instructions EB 5863 EN. Electric Control Valves. Pneumatic Control Valve
Electric Control Valves Types 3226/5857, 3226/5824, 3226/5825, 3226/5757-7, 3226/5724-8, 3226/5725-7, 3226/5725-8 Pneumatic Control Valve Type 3226/2780 Type 3226/5857 Type 3226/5757-7 Type 3226/2780-2,
More information9500 VIR VALVOINDUSTRIA ING.RIZZIO SPA
9500 REV 0504 VIR VALVOINDUSTRIA ING.RIZZIO SPA Via Circonvallazione, 0 308 Valduggia (VC) ITALY ph.+39 063 4789 fax.+39 063 47895 Info tecniche: tcnsales@vironline.com www.vironline.com VIR, leader in
More informationVB Unloader Valve (discharging)
Last update: 07/07/10 VB 135 - Unloader Valve (discharging) Pressure regulating unloader valve complete with metallic intake manifold. At gun shut off, the water flow is bypassed at reduced pressure. Technical
More informationT 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
More informationThe EPSILON is based on the principle of measuring velocity in the pipe line, therefore the flow measurement is volumetric.
Typical Applications EPSILON Flowmeter The EPSILON flow meters measure the flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical and the power
More informationType and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
More informationOrifice Flow Meters POP-S (E5720 rev /03/2013)
Accessories Orifice Flow Meters POP-S (E5720 rev. 05-20/03/2013) GENERAL WARNINGS: DISPOSAL: ¾ All installation, maintenance, ignition and setting must be performed by qualified staff, respecting the norms
More informationSafety Shut-Off Valve HON 711
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Safety device in gas pressure regulating stations Applicable for use with natural gas according
More informationDN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials
More informationPETROL. Double Case PD Flowmeters. Trust in us Our Quality Counts. Technical Bulletin. PETROL Instruments S.r.l.
Double Case PD Flowmeters Technical Bulletin The trusted specialist manufacturer of high precision instruments that relies upon the accurate measurement of fluid volumes Trust in us Our Quality Counts
More informationVML. elektrogas.com. Safety solenoid valves for gas Slow opening and fast closing type DN10 DN80 EE
VML Safety solenoid valves for gas Slow opening and fast closing type DN10 DN80 elektrogas.com EE162-1208 VML Safety solenoid valves for gas Slow opening and fast closing type Contents Description.. 2
More informationORIMAS Mass Flowmeter
Typical Applications ORIMAS Mass Flowmeter The ORIMAS mass flow meters measure the mass flow of most liquids and gases within the process industries, including chemical, petro-chemical, pharmaceutical
More informationPRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationAccessories for diaphragm seals Block flange and saddle flange Models , ,
Accessories Accessories for diaphragm seals Block flange and saddle flange Models 910.19, 910.20, 910.23 WIKA data sheet AC 91.01 Applications For welding into the product line or heating line for establishing
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More information